Transportation Tenders

Purchaser Name: MUNICIPAL WASTE TRANSPORTATION PLANT RUDNO SP KA Z OGRANICZON ODPOWIEDZIALNO CI | Poland – Refuse And Waste Related Services – Odbiór, Transport I Zagospodarowanie Odpadów O Kodzie 19 12 12 – Inne Odpady (w Tym Zmieszane Substancje I Przedmioty) Z Mechanicznej Obróbki Odpadów Inne Niż Wym. W 191211 Frakcja Powyżej 80 Mm

Purchaser Name: TCDD Transportation A S ISMIR REGION OFFICIAL TECHNICAL SERVICES SERVICES OFFICIAL | Building Renovation Works Will Be Done

Purchaser Name: MUNICIPAL WASTE TRANSPORTATION PLANT RUDNO SP KA Z OGRANICZON ODPOWIEDZIALNO CI | Poland – Refuse And Waste Related Services – Odbiór, Transport I Zagospodarowanie Odpadów O Kodzie 19 12 12 – Inne Odpady (w Tym Zmieszane Substancje I Przedmioty) Z Mechanicznej Obróbki Odpadów Inne Niż Wym. W 191211 Frakcja Powyżej 80 Mm

Purchaser Name: MUNICIPAL WASTE TRANSPORTATION PLANT RUDNO SP KA Z OGRANICZON ODPOWIEDZIALNO CI | Maintenance of green areas (tree cutting, green area care) in the Komorniki commune in 2024

Purchaser Name: Turkish Republic State Railways Transportation A.S. General Office of the Istanbul Region. | Outer Tyre

Purchaser Name: Turkish Republic State Railways Transportation A.S. General Office of the Istanbul Region. | Cleaning of Workshops and Train Sets of Gayrettepe - Istanbul Airport - Halkalı Rail System Line

Purchaser Name: BELKAR CLEANING TOURISM FUEL TRANSPORTATION AGRICULTURE CONSTRUCTION INDUSTRY AND TRADE LIMITED COMPANY | Within the Scope of Occupational Health and Safety Service Procurement, Health Control Services with Occupational Health and Safety Specialist and Workplace Physician

Details: This procurement procedure sets up a dynamic purchasing system, which in the Frameworks acquires Äänekoski, Jämsä-shaped, Toivaka, Saarika (sar lake, Karstula, Kannonkoski, Kyyjäta, Stonejä,,) Wiitaunion (viitarian and Pihtipudas,) Passenger transport services for social and health services for the Matkascriber's Trip Court. Personnel services are used for contracting entities’ representatives in the Disability Service, Social Care, Special Care and Child Protection Act, as well as the Work, Action Centre, Daytime and Day Centre customers’ Transportation,” ”The City of Jyväskylä has a separate purchase of similar Transports Targeted Dynamic Acquis Käy System in Use, but the City of Jyväskylä Transfers Principle Services. Jyväskylä City Transfers Transport Regionally to Provincial Transportation Area on 15 January 2020 beginning. “The aim of the acquisn is to secure the Equal, Reliable and Functioning Activity of the Transport Service Partners for Legislative Travel. "The acquista is a broad entity, in which we Pyive with good co-. and heating to create a clear and solution-oriented operating model. "Conningköt Representatives Goal with Dynamic Procurement System" The fact that you can implement the required tender competitions Joex. and quickly. The implementation of this goal is made public by Mm. Pre-Knowing the terms of the Agreement.

Description: Contact Information|4|n744.4|cfa|email Only|james.e.lewis5@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| production Lot Testing|1|| inspection And Acceptance - Short Version|8||||||||| desired And Required Time Of Delivery (june 1997)|29|0001|217|365 Days||||||||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|receiving Report And Invoice Combo|na|tbd|n00104|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| small Business Subcontracting Plan (dod Contracts)- Basic (dec 2019)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| small Business Subcontracting Plan (sep 2023)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| first Article Approval--contractor Testing (sep 1989)|10|1|0001|30|tbd|james Lewis - James.e.lewis5@navy.mil|tbd|0001|tbd||| limitations On Pass-through Charges (jun 2020)|1|| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| small Business Program Representations (feb 2024)|4||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334511|1350|||||||||||| requirements For Certified Cost Or Pricing Data And Data Other Than Certified Cost Or Pricing Data (nov 2021))|7|||||||| type Of Contract (apr 1984)|1|ffp| alterations In Solicitation (apr 1984)|3|||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| requirements For Certified Cost Or Pricing Data And Data Other Than Certifiedcost Or Pricing Data (may 2024))|1|| the Following Clauses Are Hereby Removed: wsstermlz10 wsstermmz01 52.247-47 252.215-7008 52.219-13 52.219-6 the Following Clauses Are Hereby Added: 52.247-50 small Business Set Aside Updated To Not Set Aside To A Small Business. updated Fill-ins For Clause 52.209-3 (see Below) due Date Extended To 28 Feb 2025. \ 1. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. 2. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders, And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By facsimile, Or Sent By Other Electronic Commerce Methods Such As Email. The Government's Acceptance Of The Contractor's Proposalconstitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. 3. If Requirement Will Be Packaged At A Location Different From The Offeror's Address, The Offeror Shall Provide The Name, Street Address, And Cage Of The Facility. 4. Any Contract Awarded As A Result Of This Solicitation Will Be Do Certified For National Defense Under The Defense Priorities And Allocations System (dpas).provision 52.211-14, Notice Of Priority Rating For National Defense, Emergency Preparedness, And Energy program Use, Shall Be Inserted In Solicitations When The Contract To Be Awarded Shall Be A Rated Order. 5. If Drawings Are Included In The Solicitation, Access Needs To Be Requested On The Individual Solicitation Page Under Contract Opportunities On Sam.gov Website. After Requesting Access, Send An Email To The Poc Listed On The Solicitation. 6. This Solicitation Requires First Article Testing (fat). See Far 52.209-3 First Article Approval - Contractor Testing For More Details. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Guidance Cable Asse . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 Documents, Drawings, And Publications Supplied Are Listed Under "drawing Number". These Items Should Be Retained Until An Award Is Made. 2.1.2 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Shall Take Precedence. Nothing In This Contract/purchase Order, however, Shall Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. 2.3 Identification Of Classified Documents - This Contract/purchase Order Requires The Contractor To Have Authorized Access To Classified Documents In Accordance With The Attached Contract Security Classification Specification (dd Form 254). The Classified Documents And Security Level Are: ;dd254 Is Required Iaw 6935198 Para 3.2.1.2 Navsea Drawing 5759651.; drawing Data=2505827 |10001| K|fn |d|0001 | K|49998|0069956 drawing Data=5205453 |53711| P| |d|0001 | P|49998|0016807 drawing Data=5727490 |53711| Y|fn |d|0001 | Y|49998|0345813 drawing Data=5893799 |53711| E|fn |d|0001 | E|49998|0260362 drawing Data=5894122 |53711| C|fn |d|0001 | C|49998|0264830 drawing Data=6370406 |53711| F|fn |d|0001 | F|49998|0105125 drawing Data=6657093 |53711| A|fn |d|0001 | A|49998|0071141 drawing Data=6935198 |53711| C|doc|d|0001 | C|49998|1039605 drawing Data=7052639 |53711| J|fn |d|0001 | J|49998|0125199 drawing Data=7052720 |53711| G|fn |d|0001 | G|49998|0227151 drawing Data=7052721 |53711| E|fn |d|0001 | E|49998|0265449 drawing Data=7052721 |53711| D|pl |d|0001 | D|49998|0009074 drawing Data=7053298 |53711| C|fn |d|0001 | C|49998|0077683 drawing Data=7053299 |53711| C|fn |d|0001 | C|49998|0077695 drawing Data=7053300 |53711| C|fn |d|0001 | C|49998|0076948 drawing Data=7053321 |53711| B|fn |d|0001 | B|49998|0108937 drawing Data=7561442 |53711| B| |d|0001 | B|49998|0081451 drawing Data=757994 |10001| N|fn |d|0001 | N|49998|0058376 drawing Data=758023 |10001| H|fn |d|0001 | H|49998|0140618 document Ref Data=mil-std-129 | | |p |041029|a| |03| document Ref Data=iso9001 | | | |010417|a| | | document Ref Data=mil-std-973 | | | |950113|a| |03| 3. Requirements 3.1 Design, Manufacture, And Performance - Except As Modified Herein, the Guidance Cable Asse Furnished Under This Contract/purchase Order Shall Meet The design, Manufacture, And Performance Requirements Specified On Drawing ;7052721; cage ;53711 0f1x1 63127; . 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-129; . 3.3 Configuration Control - Mil-std-973 Entitled "configuration Management", Paragraph 5.4.8, Configuration Control (short Form Procedure), Is Hereby Incorporated. The Contractor Shall Submit All Engineering Change Proposals In Accordance With Mil-std-973, paragraph 5.4.8.2 And Appendix D. Requests For Deviations Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.3 And Appendix E. Requests For Waivers Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.4 And Appendix E. (original and Two Copies Shall Be Submitted To Contracting Officer, Navicp-mech, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 3.3.1 Configuration Control - When The Contractor Has Received Authorization On A Prior Contract For The Same Nsn For The Use Of A Drawing Of A Later Revision Status, That Authorization Is Hereby Extended To All Succeeding Contracts/purchase Orders Until another Drawing Revision Is Approved. The Contractor Will Notify The Pco Of This Occurrence In Each Instance, In The Response To The Solicitation. Such Notification Shall Be In Writing Setting Forth The Contract Under Which The Prior Authorization Was Granted, the Date Of The Granting Of The Authorization, And The Name Of The Granting Authority. Contractors Shall Also Refer Technical Inquiries (other Than Those Covered By Mil-std-973) On Company Letterhead Signed By A Responsible Company Official, With Copies Distributed As Stated Below. The Original And Two Copies Of All Contractor Generated Correspondence Regarding Configuration Shall Be Submitted To Contracting Officer, Navicp-mech, P.o. Box 2020, Mechanicsburg, Pa 17055-0788. Contractors Are Cautioned That Implementing Engineering Changes, Waivers, Deviations Or Technical Inquiries Into The Contract/purchase Order Without Approval Of The Contracting Officer Will Be At The Sole Risk Of The Contractor. 3.4 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 3.5 Security Clearance Required - This Contract/purchase Order Requires The Contractor To Have A Government Security Clearance In Accordance With The Attached Contract Security Classification Specification (dd Form 254). 3.6 Production Lot Approval (contractor Testing) - Production Lot Test And Approval Is Required. 3.7 First Article Approval (contractor Testing) - First Article Test (fat) And Approval Is Required. 3.8 ;cage 0f1x1 Is Waived From Fa Since They Have Produced Dwg 7052721 With In The Last 5 Years. There Are No Significant Change To Fa Requirements.; 3.9 Serialization - The Supplier Shall Mark A Serial Number On Each Guidance Cable Asse In Accordance With ;iaw 7052721 Rev "e" Note 14.; . Actual Serial Numbers Will Be Assigned ;apply A Government Serial Number To Each Unitmanufactured. Serial Number Shall Be Obtainedfrom Commander, Naval Undersea Warfare Centerdivision Newport, Newport, Ri 02841-1708.nuwc_npt_serialnumbers@navy.mil.; . ;quality Assurance Provisions (qaps) i.articles To Be Furnished Hereunder Must Be Manufactured, Tested And Inspectedin Accordance With Drawing Numbers Listed Below And All Details And Specifications Referenced Therein. this Qap Applies To The Following Cable: 53711-7052721- Cable Assembly, 5w5 (1355-01-481-8700) the 5w5 Umbilical/torpedo Interface Cable Assembly (53711-7052721) Is An Assembly Of Multiconductor Cable With Attached Connectors And Appropriate Protective Jacketing Within The Cable Housing (53711-7052720). Key Supporting Documents 53711-6935198 - Torpedo Mk 48 Adcap Modifications Critical Item Performance Specification 5w5 Cable Assembly, 20 May 2003, Revision C this Specification Establishes The Requirements For The Manufacture And Acceptance Of The 5w5 Cable Assembly, Naval Sea Systems Command (navsea) Drawing 7052721. 53711-5759651 - (c) Pressure Tests (u) ref: 6935198 Para 3.2.1.2: The 5w5 Cable Assembly Shall Withstand An External Hydrostatic Pressure Of The Proof Pressure Value Of Navsea Drawing 5759651 For Five (5) +1/-0 Minutes Without Exhibiting Signs Of Damage Or Leakage. For Preproduction And Periodic quality Conformance Tests, The 5w5 Cable Assembly Shall Meet This Requirement Ten (10) Consecutive Times. 53711-5893799 - Cable Assembly, 5w5 Umbilical/torpedo Interface, Wiringdiagram this Is The Wiring Diagram For The 5w5 Cable Assembly. 53711-5894122 - Cable Assembly, 5w5 Umbilical/torpedo Interface, Cabling Diagram This Is The Cabling Diagram For The 5w5 Cable Assembly. ii.cable Acquisition Requirements Are Specified In Section 6.2 Of 53711-6935198- Torpedo Mk 48 Adcap Critical Item Product Fabrication Specification For 5w5cable Assembly 20 May 2003, Revision C: 6.2 Ordering Data - Procurement Documents Should Specify The Following: a.title, Specification Number, Revision Letter, Date Of The Revision Of This Specification. b.exceptions To This Specification, Applicable Drawings, Or Other Referenced Documents. c.desired Completeness And Availability Of Test Data, Including Data Cards. d.type And Degree Of Contractor Quality Assurance Systems Required. e.whether Or Not The Test Samples Required Are Included In The Number Of 5w5 Cable Assemblies Ordered. f.activities Designated By The Government To Perform The Preproduction And Periodic Production Monitoring Tests Per Figures 3 And 4. (currently The Government Is Designating The Contractor To Perform The Tests. Government Would Like To Be Notified When Testing will Be Performed In Case They Wantto Have Government Witness The Tests.) g.level Of Preservation And Packaging. h.method Of Shipment. iii. Reference Documents N a iv. Quality/inspection Requirements A. During The Performance Of This Contract, The Contractor/supplier Mustmaintain A Quality Management System In Accordance With As9100/iso-9001 Or Equivalent. due To The Critical Application Of This Part, It Is Recommended That Themajor Characteristics And Key Features Of The Part, Identified Below, Beemphasized When Communicating With The Contractor/supplier. b.all Quality Assurance Operations Performed By The Supplier Will Besubjected To Government Verification At Any Time. Verification Will Consistof (a) Tests, (b) Surveillance Of The Supplier's Operations, (c) Analysis,(d) Process Inspection, And (e) Product inspection. Failure Of The Supplierto Promptly Correct Deficiencies Discovered By The Supplier Or Of Which Thesupplier Is Notified Shall Be Cause For Suspension Of Product Acceptanceuntil Corrective Action Has Been Made Or Until Conformance To The prescribedcriteria Has Been Demonstrated. c. Quality Assurance Provisions For The Fabrication/assembly Of The Cables Are Specified In 53711-6935198. cable Assembly Production Sampling 1. Preproduction Sampling - A Preproduction Sample Of Two (2) 5w5 Cable Assemblies Will Be Manufactured Using The Methods And Procedures Proposed For Production. The Sample Will Pass The Quality Conformance Tests As Specified In Figure 3 Prior To Submission To an Activity Designated By The Procuring Agency To Determine Compliance With The Requirements Of The Specifications And Drawings. Further Production Of The 5w5 Cable Assembly By The Contractor Prior To The Approval Of The Contracting Agency Will Be At The supplier's Risk. (currently The Government Is Designating The Contractor To Perform Inspection And Testing Required To Verify Compliance With Specifications And Drawings. Government Would Like To Be Notified When Inspection And Testing Will Be Performed In Case they Want To Have Government Witness Present.) preproduction Cable Assembly Testing Requirements: preproduction Tests Conducted By The Contractor (figure 3): performance Verification low-pressure Leakage hydrostatic Pressure (one Cycle) electrical Performance 4. Quality Assurance 4.1 Quality System Requirements - The Supplier Shall Provide And Maintain A Quality System Acceptable To The Government. The Quality System Requirements Shall Be In Accordance With Iso 9001. 4.1.1 ;suppliers Currently Using And Maintaining Inspection System Requirements To mil-i-45208 Are Granted Permission To Utilize This If Desired.; 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records Of Inspection - (this Requirement Is Not Applicable To Government Purchase Orders) Records Of All Inspection Work Performed By The Contractor, As Referenced Elsewhere In This Contract, Shall Be Kept Complete And Available To The Government During the Performance Of The Contract And For A Period Of Four Years After Final Delivery Of Supplies. 4.4 First Article Test/inspection (contractor) - The Contractor Shall Conduct ;iaw 6935198 Rev "c"; first Article Test/inspection On ;2; unit(s) In Accordance With Requirements ;6935198 Para 3.2.1.2; . 4.5 Production Lot Test (contractor) - The Contractor Shall Perform Production Lot Testing In Accordance With ;iaw 6935198 Para 4.2.1.1, 4.2.2.1, And 4.2.1.2 a Preproduction Sample Of Two (2) 5w5 Cable Assemblies Will Be Manufacturedusing The Methods And Procedures Proposed For Production. from Each Production Lot Of 50 5w5 Cable Assembliesthat Have Passed Thequality Conformance Tests Asspecified In Figure 2, A Sample Of Two (2) 5w5 Cableassemblies Will Be Selected At Random By Thegovernment Inspector For Submission To An Activitydesignated By the Procuring Agency To Determine Compliance With The Specifications And Drawings.; . 4.6 Quality Conformance Inspection - The Contractor Is Responsible For Conducting A Quality Conformance Inspection In Accordance With ;iaw 6935198 Rev "c". 3.4.2; , Paragraph ;para 4.2.1.3; And Preparing An Inspection Report In Accordance With The Contract Data Requirements List, Dd Form 1423. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documents That Are Required By Private Industry In Fulfillment Of Contractual Obligations In Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Of The Applicable Societies. C. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410p, 101 Strauss Avenue Indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contract Number, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: Contracting Officer Navicp-mech Code 87321 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered From: Commanding Officer Navicp-mech Code 009 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Shall Be Obtained By Submitting A Request On Dd Form 1425 To Navicp-mech. date Of First Submission=030 Dac ;certificates Of Quality Compliance For The Followingcable Assembly Requirements Shall Be Delivered Tothe Government Via Contract Data Requirements List (cdrl). preproduction Sample Quality Conformance Inspection And Test Data. production Quality Conformance Inspection And Test Data. periodic Sample Quality Conformance Inspection And Test Data. certificates Of Quality Compliance For The Followingsource Control And Vendor Item Controlled Cableassembly Components Shall Be Delivered To Thegovernment Via Contract Data Requirements List (cdrl). connector, Receptacle, Electrical, Solder Type,solder Mounting, Bayonet Coupling (pn 7053321)contact Assy, #20 (pn 757994)power Cables 7053298-1/-2, 7053299-1/-2/-3,7053300-1/-2/-3. copies Of The Certificate Of Quality Complianceshall Be Delivered To The Engineering Support Activity,nuwc Newport: Nwpt.nuwc_8554_qapcdrl@navy.mil james.c.ferguson1.civ@us.navy.mil richard.d.penfold2.civ@us.navy.mil patrick.r.faerber.civ@us.navy.mil recommend A Post Award Conference Be Conducted Withthe Contractor/supplier To Review The Item Keyfeatures. The Government Engineering Support Activity,nuwc Newport, Would Like To Participate In Theconference If One Is Scheduled. ; date Of First Submission=030 Dac ;isea Poc: James.c.ferguson1.civ@us.navy.mil richard.d.penfold2.civ@us.navy.mil patrick.r.faerber.civ@us.navy.mil newport, Ri 02841-1708 phone: 401-832-4593 dsn: 432-4593 fax: 401-832-4194 e-mail: Patrick.faerber@navy.mil ;

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement|8|x|||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo) Type||cognizant Dfas|n00383|cognziant Dcma|congnizant Dcma|see Schedule|source||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportuity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| limitation Of Liability--high-value Items (feb 1997)|1|| limitations On Pass-through Charges (jun 2020)|1|| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| facsimile Proposals (oct 1997)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| this Solicitation Will Be Using Competitive Procedures. this Solicitation Is For Made New Manufacture Spare Parts. this Requirement Will Be Awarded To The Offeror Based On The Following Evaluation Criteria Submitted Via Quote. offers Submitted Will Be Evaluated Based On The Following Criteria: Lead Time, Price, Past Performance And Capacity. the Closing Date For This Solicitation Is Listed On Page 1. the Quotes May Be E-mailed To The Below Address And Must Be Received On Or Before 2:00 Pm Est Of The Closing Date. the Offeror Shall Submit One Unit Price Per Clin And The Unit Price Should Be Firm Fixed Price. Tiered Pricing Will Not Be Accepted Or Evaluated. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders, And Modifications) Related To The Instant Procurement Are Considered To Be ?issued? By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such As E-mail. The Government?s Acceptance Of The Contractor?s Proposal Constitutes Bilateral Agreement To Issue Contractual Documents As Detailed Herein. \ 1. Scope 1.1 . Markings Shall Be In Accordance With Mil-std-130. 1.2 Pre-award / Post Award Requirements: due To The Critical Use Of This Item And Its Quality History, A Pre-award Survey And Post-award Conference May Be Required For All New Manufacturers. For All Previous Sources, A Post-award Conference May Be Recommended. 1.3 The Components Being Acquired Under This Solicitation Have Been Classified As Flight Critical Requiring Engineering Source Approval By The Naval Air Systems Command. Only Those Companies Who Have Submitted Requests For Source Approval And Been Approved will Be Eligible For Award Under This Solicitation. Any Company Not Previously Approved May Submit A Source Approval Request To The Contracting Officer, Naval Inventory Control Point, (see Block 10 Of The sf33 For Name And Code). The Source Approval Request Shall Contain The Following Documentation And Shall Be Submitted By The Closing Date Of This Solicitation: (a) Copy Of Complete Configuration Drawings For A Similar Item(s) Which Your Company Has Produced Within The Past Three Years, Including Test Procedures For Which Your Company (1) Has Been Qualified To Manufacture And (2) Which Is Similar, I.e., Requires The same Materials, Manufacturing Processes, Inspections, Tolerances And Similar Application As The Item(s) For Which You Are Seeking Approval. (b) Copy Of The Complete Process/operation Sheets Used To Manufacuture The Similar Item, Including But Not Limited To, Detailed Shop Sketches. These Plans Must Note Those Operations And Processes Performed By Subcontractors/ Vendors. (c) Complete Copies Of Purchase Orders, Shipping Documents, Etc. That Document Delivery Of Production Quantities Of The Part To The Original Equipment Manufacturer Or Military Service. Provide The Most Recent Copies Of The Documents. (d) A Detailed Comparative Analysis Of The Differences/similarities Between The Similar Part And The Part(s) For Which You Are Seeking Approval. This Analysis Should Include Materials, Configuration, Tolerances, Process Requirements, Dimensions, Castings, forgings, Etc. (e) Copy Of Inspection Method Sheets Used In The Manufacturing And At Final Inspection. These Sheets Should Include Actual Tolerance, Print Requirements, Inspection Devices, Sources Performing The Operation And Level Of Inspection. Critical Characteristics should Be Discernible From All Other Characteristics. the Above Requirements Are A Subset Of Requirements Specified In The Aso source Approval Information Brochure Dated January 1995. The Submission Of This Data Subset Is Contingent Upon And In Consideration Of The Submitting Contractor Meeting All Other Requirements Specified In This Solicitation To Include A Bilateral Agreement With mda Which Includes Availability Of Complete Data, Mrb Disposition, Etc. Any Company Not Having Such Agreement, But Desiring To Seek Engineering Source Approval, Will Be Required To Submit Data Meeting All Requirements Of The Aso/navicp Source Approval brochure. 1.4 Sampling Rates (aqls) Indicated Below Shall Be Used In Accordance With ansi Z1.4 For Single Sampling And A General Inspection Level Of Ii. 1.5 In Addition To The 100% Pco Mandatory, Critical And Major Characteristics, attributes For Plating, Hardness And Non-destructive Testing Will Be Inspected one Hundred Percent. 1.6 Contractor Shall Develop A System For Identification Of Individual piece Parts For Traceability Purposes. Markings Shall Not Be Permanent. 1.7 An Aql Of 1.5 Will Be Used For Class 3 Threads And Dimensions, And geometric Feature Controls With A Tolerance Range Of .010 Or Less. 1.8 For Minor Characteristics, A Sampling Rate Determined By The Contractor and Subject To Qar Approval Will Be Used. 1.9 The Material Covered In This Contract/purchase Order Will Be Used In A crucial Shipboard System Enabling The Launch And/or Recovery Of Aircraft. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In A Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems Or Loss Of Aircraft. Therefore,the Material Has Been designated As Critical Material And Special Control Procedures Are Invoked to Ensure Receipt Of Correct Material. 1.10 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;nawc Lakehurst; Drawing Number ( ;80020; ) ;613466; , Revision ;w; And All Details And Specifications Referenced Therein. 1.11 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not be Provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced specification. 1.12 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents drawing Data=a316214 |80020|ap| |d| | | | drawing Data=a316215 |80020|ak| |d| | | | drawing Data=a316242 |80020| G| |d| | | | drawing Data=a414240 |80020|af| |d| | | | drawing Data=b414463 |80020| Y| |a| | | | drawing Data=b91477 |80020| W| |d| | | | drawing Data=mpr 1222 |80020| A| |d| | | | drawing Data=mpr 1223 |80020| C| |d| | | | drawing Data=323199 |80020| D| |a| | | | drawing Data=323201 |80020| E| |d| | | | drawing Data=323207 |80020| H| |d| | | | drawing Data=416451 |80020| M| |d| | | | drawing Data=416452 |80020| G| |d| | | | drawing Data=416453 |80020| E| |d| | | | drawing Data=416454 |80020| G| |d| | | | drawing Data=416455 |80020| H| |d| | | | drawing Data=416456 |80020| L| |d| | | | drawing Data=416457 |80020| J| |a| | | | drawing Data=416458 |80020| F| |d| | | | drawing Data=416459 |80020| G| |d| | | | drawing Data=416538 |80020| E| |d| | | | drawing Data=416539 |80020| K| |d| | | | drawing Data=416541 |80020| F| |d| | | | drawing Data=416542 |80020| H| |d| | | | drawing Data=416543 |80020| P| |d| | | | drawing Data=416547 |80020| C| |a| | | | drawing Data=416548 |80020| G| |d| | | | drawing Data=416560 |80020| F| |d| | | | drawing Data=418417 |80020| F| |d| | | | drawing Data=418418 |80020| G| |d| | | | drawing Data=418420 |80020| P| |a| | | | drawing Data=511016 |80020| K| |d| | | | drawing Data=511225 |80020| H| |a| | | | drawing Data=513392 |80020| H| |d| | | | drawing Data=520220 |80020| J| |a| | | | drawing Data=613466 |80020| W| |d| | | | drawing Data=613662 |80020| M| |d| | | | 3. Requirements - Not Applicable 4. Quality Assurance 1. Unique Requirements: A. Identified Under Official Remarks Section Of The Contract. 2. Interim Inspection Requirements: N/a 3. Alre Csi Parts Require Certification: A. When Certified, An Alre Part Is Marked With A Material Identification Code(mic). Nawcadlke Qa Will Provide The Mic To Dcma If The Component Is Source Accepted, And After Receipt Of All Associated Data. Application Of Mic Shallbe In The Same Methodology As the Drawing Note For Part Marking, And In Same Area As Part Marking (next To, Above, Or Below). 4. Receipt Inspection And Certification Of Sub-components: A. P/ns A316215-6, A414240-6, And A414240-7 Shall Be Certified At Lakehurst. 5. Receipt Inspection And Certification Of The Top Assembly: A. The Receipt Inspection And Certification Of The Top Assembly, P/n 613466-4, Shall Occur At Lakehurst During The Final Inspection. 6. Contractor Assist And Part Marking: N/a quality Assurance Requirements: 1. The Solicitation/contract Shall Contain The Nawcadlke Inspection Surveillance Clause As Follows: A. N/a B. N/a 2. The Contractor Shall Perform Quality Conformance And Lot Sampling Inspection For All Associated Features That Are Present In The Drawings And Specifications: A. Features/attributes/requirements Classified As Critical And Major On The Drawing(s) Or Within The Technical Specification Shall Be Inspected And Shall Have The Actual Dimensions Documented 100%; B. Attributes For Plating, Hardness, And Non-destructive Testing Shall Be Inspected 100%; C. Class 3 Threads, Dimensions, And Geometric Feature Controls With A Tolerance Range Of .010 Or Less Shall Be Inspected Using An Aql Of 1.5 And The General Inspection Level Ii As Defined By Ansi Z1.4. D. Minor Characteristics: Sampling Shall Be Inspected Using An Aql Of 4.0 And The General Inspection Level Ii As Defined By Ansi Z1.4. 3. The Material Covered In This Contract/purchase Order Will Be Used In A Crucial Shipboard System Supporting The Launch And/or Recovery Of Aircraft. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In A Serious personnel Injury, Loss Of Life, Loss Of Vital Shipboard Systems, Or Loss Of Aircraft. Therefore, The Material Has Been Designated As Critical Safety Item (csi) Material And Special Control Procedures Are Invoked To Ensure Receipt Of Correct Material. 4. First Article Testing: N/a 5. Production Lot Special Tests: A. Each Buffer Cylinder Assy, P/n 613466-4, Shall Be Shipped To Lakehurst For Inspection And Testing As Cited In Drawing 613466. 6. For Purposes Of This Tdr, The Term Ndt Shall Refer To The Following Methods: Mt - Magnetic Particle Testing, Pt ? Penetrant Inspection, Ut ? Ultrasonic Testing, Rt ? Radiographic Testing, And Vt ? Visual Testing. 7. Companies Performing Ndt Shall Be Nadcap Accredited, Or A Laboratory Accredited By One Of The Organizations Listed Below As Satisfying Iso 17025 (general Requirements For The Competence Of Testing And Calibration Laboratories). Ndt Certificates Shall Be Bear the Symbols Of Accreditation And The Accreditation Body. A. American Association For Laboratory Accreditation (a2la) B. Ansi National Accreditation Board (anab) C. International Accreditation Service, Inc (ias) D. National Voluntary Laboratory Accreditation Program (nvlap) E. Perry Johnson Laboratory Accreditation, Inc (pjla) F. Canadian Association For Laboratory Accreditation Inc. (cala) G. Standards Council Of Canada (scc) 4.1 Review Documentation As Provided Under Dd 1423 Requirements. 4.2 Critical Manufacturing Processes ( ;applies; ) Heat Treat ( ;applies; ) Welding ( ; ; ) Cadmium Plating ( ;applies; ) Engineering Chrome Plating ( ; ; ) Nickel Chrome Plating ( ; ; ) Casting(s) ( ; ; ) Forging(s) ( ;mpr1222, Mpr1223; ) Mpr (material Processing Requirements) 4.3 . Mandatory Inspection Requirements: 100% Procurement Contracting Officer (pco) Mandatory Inspection Is Required And Shall Be Accomplished At Source Under The Surveillance And Final Approval Of The Cognizant Dcmao Quality Assurance Representative (qar). during Production, Mandatory Inspection Is Required To Be Accomplished By The Contractor As Follows: A. Level Of Inspection (loi). 1. Critical Characteristics: 100% Inspection Shall Apply. 2. Major And Minor Characteristics: Loi Shall Be In Accordance With A Sampling Plan Acceptable To The Qar. B. Critical Characteristics: ;roy Janney Nawcadlke Qa / Tel: (732)-323-2834 e-mail: Roy.a.janney.civ@us.navy.mil ; C. Major And Minor Characteristics 1. Shall Be Defined By The Contractor Subject To Qar Concurrence, Unless Defined On Applicable Drawings And Associated Specifications. 4.4 Special Inspection Requirements ( ;applies; ) Magnetic Particle Inspection ( ;applies; ) Surface Inspection ( ;applies; ) Penetrant Inspection ( ; ; ) Radiographic Inspection ( ; ; ) Ultrsonic Inspection ( ; ; ) High Shock Test ( ; ; ) Mechanical Vibration Test 4.5 Final Inspection Requirement:due To The Critical Nature Of This Item, Representatives Of The Buying office/and The Cognizant Field Activity, Nawc Lakehurst, Shall Be Notified By The Successful Contractor At Least 14 Days Prior To Presentation To The Dcm Qar Of The Items For Final Inspection So That They May Have The Option Of witnessing The Final Inspection. The Contractor Shall Notify By Email Or telefax Pco And Nawc Lakehurst Qa ;roy Janney Nawcadlke Qa / Tel: (732)-323-2834 e-mail: Roy.a.janney.civ@us.navy.mil; To Arrange For The Final Inspection.the Authority Of The Qar Shall Not Be Abrogated. If The Notification Is Not Given To Both Sites Then The Qar Shall Not Accept The Units. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable this Is A Alre Critical Safety Item. For Drawing Updates, See Attached Nawc Lke Drawing Update Sheet. navsup Reference Only: Procurement Tdr 24-10108 the Components Being Acquired Under This Solicitation Have Been Classified As "critical" Requiring Engineering Source Approval By Naval Air Systems Command Only Those Companies Who Have Submitted And Been Approved Will Be Eligible Foraward Under This Solicitation. Any Company May Submit A Source Approval Request As Outlined In This Solicitation. all Records Pertaining To Alre Csi/cai Manufacture And Inspection/test Shall Be Provided To The Alre Cognizant Technical Authority. All Records Shall Be Maintained By Lke Qa And By The Manufacturer For A Period Of Seven Years. date Of First Submission=asreq block 16. Remarks: (block 3) Subtitle: Inspection/certification Data To Substantiate Quality Of Production Lot Test Items (block 12) Date Of First Submission: Concurrently With Delivery Of Plt Items inspection/certification Data Needed To Substantiate The Quality Of The Production Lot Test Units Shall Be Included In Production Lot Test Unit Packaging. The Outside Of The Package That Contains The Data Shall Be Clearly Marked "inspection/certification Data included". data Requirements: a. Copies Of All Approved Requests For Variations. b. Hydrostatic Test Per Drawings 613466, 418420, A316215, A316214 And 613662. c. Material Properties Per Drawings 613662, 323207, A316214, A316215, 323199, 323201, B414463, A414240, 416451, 416452, 416453, 416454, 416455, 416456, 416457, 416458, 416459, 416547, 416538, 416539, 416541, 416542, 416543, 520220, 416560, 418417, 418418, 513392, 511225, B91477, 416548, 511016. d. Heat Treat Per Drawings A316215, A414240, 416455, 416458, 416538, 416539, 416541, 416542 And 416560. e. Hardness Test Per Drawings A414240, And A316215, 416455, 416458, 416539, 416541, 416542, 416560. f. Magnetic Particle Inspection Per Drawings A316215, B414463, A414240, 416458, 416459, 416538, 416539, 416541, 416542, And 416560. g. Penetrant Inspection Per Drawings 511225, And A316214. h. Coating Per Drawings 513392, 613662. 416542, 416541, 416456, 416457, 416456, 416455, And 416453. i. Grit Blast Per Drawings 416542, 416453, 416455, 416456 And 416457. j. Plating Per Drawings B414463, 416459, 416539. k. Dimensional Inspection Per Drawings 323199, B414463, 416457, 416458, 416547, 416538, 513392, 511016, 418420, 511225, B91477, 613662, 418418, 418417, 416560, 520220, 416543, 416542, 416541, 416539, 416459, 416456, 416455, 416454, 416453, 416452, 416451, A414240, 323201, A316215, A316214, 323207, 416548. l. Part Identification Per Drawings 613466, 323199, 416457, 416458, 416547, 416538, 513392, 418420, 511225, 613662, 520220, 416543, 416542, 416456, 416455, 416454, 416453, 416452, A316214, And A414240, 416451, 511016. m. Welding Per Drawing 513392. n. 100% Inspect And Record The Readings For The Pitch Diameter; And Document That The Inspection Results For The Functional Size Iaw System 22 Of Fed-std-h28/20 Areacceptable Per Drawings A414240, A316215, 416456, 416459, 416538, 416539, 416541, 513392, 418420. o. Packing Per Drawing 416543. date Of First Submission=asreq 16. Remarks: (block 12) Date Of First Submission: Concurrently With Final Inspection. data Requirements: a. Copies Of All Approved Requests For Variations. b. Hydrostatic Test Per Drawings 613466, 418420, A316215, A316214 And 613662. c. Material Properties Per Drawings 613662, 323207, A316214, A316215, 323199, 323201, B414463, A414240, 416451, 416452, 416453, 416454, 416455, 416456, 416457, 416458, 416459, 416547, 416538, 416539, 416541, 416542, 416543, 520220, 516560, 418417, 418418, 513392, 511225, B91477, 416548, 511016. d. Heat Treat Per Drawings A316215, A414240, 416455, 416458, 416538, 416539, 416541, 416542 And 416560. e. Hardness Test Per Drawings A414240, And A316215, 416455, 416458, 416539, 416541, 416542, 416560. f. Magnetic Particle Inspection Per Drawings A316215, B414463, A414240, 416458, 416459, 416538, 416539, 416541, 416542, And 416560. g. Penetrant Inspection Per Drawings 511225, And A316214. h. Coating Per Drawings 513392, 613662. 416542, 416541, 416456, 416457, 416456, 416455, And 416453. i. Grit Blast Per Drawings 416542, 416453, 416455, 416456 And 416457. j. Plating Per Drawings B414463, 416459, 416539. k. Dimensional Inspection Per Drawings 323199, B414463, 416457, 416458, 416547, 416538, 513392, 511016, 418420, 511225, B91477, 613662, 418418, 418417, 416560, 520220, 416543, 416542, 416541, 416539, 416459, 416456, 416455, 416454, 416453, 416452, 416451, A414240, 323201, A316215, A316214, 323207, 416548. l. Part Identification Per Drawings 613466, 323199, 416457, 416458, 416547, 416538, 513392, 418420, 511225, 613662, 520220, 416543, 416542, 416456, 416455, 416454, 416453, 416452, A316214, And A414240, 416451, 511016. m. Welding Per Drawing 513392. n. 100% Inspect And Record The Readings For The Pitch Diameter; And Document That The Inspection Results For The Functional Size Iaw System 22 Of Fed-std-h28/20 Are Acceptable Per Drawings A414240, A316215, 416456, 416459, 416538, 416539, 416541, 513392, 418420. o. Packing Per Drawing 416543. date Of First Submission=090 Dac the Welding Procedures Will Be Used By The Government To Verify Contractor Designated Welding Responsibilities Implement Weld Procedures For Each Cont Ractor, Subcontractor Or Welding Entity Performing Welding On Specific Work Specifications 16. Remarks: (block 5) Data Requirements: a. Weld Procedure Iaw Navsea S9074-ar-gib-010/278^ Para 4.2 Per Drawing 513392. (block 13) Date Of Subsequent Submmision: Approval Or Reason For Disapproval Shall Be Given By Navairwarcenacdivlke Via The P.c.o. Nlt 45 Days After Disapproval. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl14000 Bldg 596 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks: (block 5 ) Data Requirements: a. The Weld Procedure Qualification Test Report, Including All Supporting Test Reports And Documentation, Iaw Navsea S9074-aq-gib-010/248^ Para 4.2.3 And 4.6 Drawing 513392. (block 13) Date Of Subsequent Submmision: Approval Or Reason For Disapproval Shall Be Given By Navairwarcenacdivlke Via The P.c.o. Nlt 45 Days After Disapproval. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl14000 Bldg 596 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=asreq 16. Remarks: (block 5) Contract Reference: a. Evidence Of Welder Performance Qualification, Including Supporting Test Results And Documentation, Iaw Navsea S9074-aq-gib-010/248^ Para 5.2 Per Drawing 513392. (block 12) Date Of First Submission: 30 Days Prior To Production. (block 13) Provide Qualification Evidence For All Welders. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks: (block 5) Contract Reference: a. Evidence Of Level Iii Certification Iaw T9074-as-gib-010/271^ Para 1.6 For The Individual Who Approved The Welders Qualification Training Program Iaw Navsea S9074-aq-gib-010/248 Para 5.2.3.1, Per Drawing 513392. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks: (block 5) Contract Reference: a. Visual Inspection Written Procedure To Be Used To Visually Inspect All Welds Iaw T9074-as-gib-010/271^ Para 8.3 And 1.7 Thru 1.7.3 Per Drawing 513392. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks: (block 3) Subtitle: welder Qualification Training Written Procedure. (block 5) Contract Reference: a. Evidence Of Approval Of The Welder Qualification Training Program Iaw Navsea S9074-aq-gib-010/248^ Para 5.2.3.1(d), Per Drawing 513392. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks: (block 5) Contract Reference: b. Evidence Of Maintenance Of Qualification For All Welders Iaw Navsea S9074-aqgib-010/248^ Para 5.2.11 And 5.2.12 Per Drawing 513392. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000