Transportation Tenders

Purchaser Name: Transportation company Karlsruhe GmbH | To the tender 'v 04-25 Gleisviereck Tullastraße'

Purchaser Name: Transportation, Nys Dept Of | Design Services For Bridge Corrective And Flag Repairs; All Region 11 Counties (nyc)

Purchaser Name: Transportation, Nys Dept Of | Highway Reconstruction - Rt. 370

Purchaser Name: Transportation, Nys Dept Of | Northern Westchester East-west Corridors Study

Purchaser Name: Texas Department Of Transportation | Cold Planer With Operator In The Fort Worth District

Purchaser Name: Transportation Base In POVIDZ | 33. Transport Aviation Base in Powidz

Purchaser Name: Transportation In The UK | "O Zmianie Ogłoszenia Przebuilding I Rozbud Dp 1114c Relacji Wałdowo - Olszewka Na Odc". 2,000 Km Zlok. Pom. Km 0+426 I+326 Oraz Km 3+353 I 4+453 Wraz Z Bud. Mostu Na Rz.

Details: Solicitation No. 36c24525b0003: The Department Of Veterans Affairs (va) Perry Point Va Medical Center Located At Perry Point, Md Intends To Issue An Invitation For Bids (ifb) To Award A Single, Firm Fixed Price Contract For Construction Services. This Project Consists Of The Contractor Providing All Labor, Materials, Equipment, Permits, Transportation, And Supervision Necessary For The Construction Services For Project Number 512a5-25-003 “repair Fire Damage”. competition For This Procurement Is Restricted To Service-disabled Veteran Owned Small Businesses (sdvosb). Sdvosb Firms That Submit Bids On Sdvosb Set Asides That Are Not Verified Will Be Deemed Nonresponsive (invitation For Bid). The Magnitude Of Construction Is $25,000.00-$100,000.00. The Firm Must Be A General Construction Firm Approved Under Naics: 236220, Size Standard: $39.5 Million. The Offeror Shall Obtain All Necessary Licenses Or Permits Required To Perform This Work In The State Of Md. Prospective Contractors Must Be Registered And Current In The Following Websites: Veteran Small Business Certification And Https://www.sam.gov To Be Eligible For Award. Bids Will Be Accepted From Only Responsible And Responsive Contractors. There Will Be A Pre-bid Site Visit For This Project Which Will Be Held At The Perry Point Va Medical Center, Perry Point, Md 21902. All Interested Parties Are Encouraged To Attend The Site Visit. The Date Of The Site Visit Will Be Confirmed In The Solicitation. All Questions Generated From The Site Visit Shall Be Submitted In Writing To The Contracting Officer To Brandon.parker2@va.gov. Prospective Contractors May Acquire Solicitation Documents, Which Are Only Available In .pdf Electronic Format By Registering And Downloading Plans And Specifications From The Contractor Opportunities Website. Solicitation Documents Will Be Available On Or About 1/28/2025. Approximate Bid Opening Date Is 02/18/2023. Firm Site Visit And Bid Opening Dates Will Be Provided On The Solicitation Once Issued. There Will Be A Public Bid Opening. Bidders Are Advised That Award Will Be Made To The Responsive/responsible Bidder With The Lowest Price. The Procurement Is Subject To Availability Of Funds. note For Joint Venture (jv) Offerors: In Accordance With Vaar 852.219-73(f) Joint Ventures May Be Eligible So Long As The Joint Venture Meets The Requirements Of 13 C.f.r. 128.402. In Order To Comply With 13 C.f.r. 128.402(e) Jv Offerors Must Include In Their Volume I A Certification, Signed By An Authorized Official Of Each Partner To The Joint Venture, Stating That The Parties To The Joint Venture (1) Have Entered Into A Joint Venture Agreement That Fully Complies With Paragraph (c) Of 13 Cfr § 128.402 And (2) Will Perform The Contract In Compliance With The Joint Venture Agreement. Failure To Submit The Certification Will Render The Offeror Ineligible For Award. scope Of Work Building 23h Fire Damage Repairs 512a5-25-003 work Item 1: The Contractor Shall Provide All Supervision, Labor, Materials, And Equipment To Replace The Acoustical Ceiling Tiles, Flooring, Gypsum Board Walls, And Wall Base That Were Previously Removed As Part Of The Fire Damage Cleanup. Attachment 1 Contains A Detailed Breakdown Of The Projected Repair Area Included In Each Room For Ceiling Tiles, Flooring, Drywall, Paint, And Wall Base. Approximate Total Areas For Repairs Under Project To Be Included In Bid: 1610 Sf Of New Gypsum Board Wall Installed On Existing Metal Studs/hat Channel. 1640 Sf Of Acoustical Ceiling Tile (including Minor Repairs To Existing Suspension Grid) 578 Lf Of Rubber Wall Base 1184 Sf Of Carpet Tile And Mastic 250 Sf Of Luxury Vinyl Plank Flooring And Mastic 6685 Sf Of Wall Patching/skim Coat And Painting. 4th Floor Office Suite To Be Fully Repainted After Wall Repairs. Coordinate Color Selections With Cor. Contractor Shall Include The Removal And Reinstallation Of Existing Wall Paintings, Door Tags, Tv Mounts, Bulletin Boards, And Other Signage/artwork As Required To Repair And Repaint Walls. Va To Provide Temporary Storage Location. Contractor To Provide And Install A New Grid-supported Hvac Supply Diffuser (2x2) With Manual Damper And Flexible Ductwork In Room 409 To Replace One Removed During Demolition Phase. Coordinate With Existing Duct Size. Contractor Shall Remove And Replace All Electrical Receptacle And Switch Cover Plates Within The Work Area That Were Damaged During The Water Damage Remediation Phase. Replacement Cover Plates Shall Be Type 302 Stainless Steel Matching The Type And Color Removed. Oversize Plates Are Not Acceptable. Contractor Shall Remove And Rebuild The Existing 2hr Rated Ul Shaft-wall System (ul U415 System B) Around The Existing Generator Exhaust Pipe (including 1 Type X Gypsum Liner Panel, 2â½ Ch Metal Studs, And 2 Layers Of 5/8 Type X Gypsum Board). Contractor Shall Include All Accessories Required For The Complete Installation Of All Finish Systems, Including But Not Limited To Stainless-steel Flooring Transition Strips, Light-gage Or Wood Furring/blocking, And Act Suspension Grid Accessories/pieces For Repairs. All Joints Between Gypsum Board And Other Materials Shall Be Fully Caulked Prior To Painting. Work Areas Are Currently Isolated From The Rest Of The Hospital With Temporary Partitions (hard Wall Or Plastic Sheeting). Contractor Shall Provide For Any Supplemental Infection Control Barriers And Icra Preventative Measures Required By The Work. Level 3 Infection Control Risk Assessment (icra) Controls (including Negative Pressure Exhaust) Will Be Required During All Drywall And Flooring Work To Control Dust And Fumes. work Item 2: The Contractor Shall Engage The Services Of A Maryland State Licensed Abatement Contractor To Remove Approximately 1300 Sf Of Residual Black Mastic From Previously Removed Tile Flooring On The 4th Floor Upper Level (rooms 406-410 And 4th Floor Corridor). Existing Mastic Is Non-friable And Has Been Previously Scarified By Mechanical Means, But A Residual Base Layer Remains That Must Be Removed By Chemical Means. Va Will Provide Their Own Vpih Consultant To Conduct Background Air Monitoring And Clearance Testing For Internal Purposes. Contractor Shall Provide Their Own Separate Cih In Accordance With Osha To Conduct Continuous Air Monitoring And Final Tem Clearance After Removal Of Material. Contractor Shall Provide Legal Disposal Of All Asbestos Waste Per Comar 26-11-21-08 Asbestos Waste Disposal. Records Of Hazardous Waste Disposal (such As Manifests, Hazardous Waste Profiles, Ldrs) Must Be Provided By Approved Waste Transporter And Signed By An Approved Vamhcs Manifest Signer From The Vamhcs Safety Department Only. All Records Provided To Cor And Vamhcs Gems Coordinator At Vamhcsgemsprogram@va.gov 10-day Neshaps Notification To Mde And The Epa For Demolition Or Renovation (40 Cfr ⧠61.145, Figure 3, Notification Of Demolition And Renovation), Provide Completed Copy To Vamhcs Projects Cor. Prepare And Submit Asbestos Abatement Plan To Vamhcs Projects Cor For Approval Before Proceeding With Work. work Item 3: The Contractor Shall Seal Existing Penetrations Within The Work Area Between Floors With The Appropriate Fire-rated Material And/or Fire Caulking. This Scope Specifically Shall Include: Installation Of A Ul-listed 2hr Fireproofing Assembly Around An Existing Generator Exhaust Pipe Penetration Through The Concrete Floor At The 2nd, 3rd, And 4th Floor Levels (located In The Corner Of Room 1g-108, 227, 323, And 409). Approximate Floor Penetration Is Roughly 18 X18 With A 12-14 Diameter Insulated Pipe Passing Though. Basis Of Design Ul Firestop Assembly Shall Be C-aj-5210 . Infill/fireproofing Around All Existing Radiator Steam Pipe Penetrations Within The Work Area. Approximate 4 Diameter Hole With â½-2 Diameter Pipe. Basis Of Design Ul Firestop Assembly Shall Be C-aj-1551 . Contractor Shall Include Infill Of (2) Penetrations At Each Radiator (located Below Windows Within Work Area) In Proposal.

Details: Changes  8 November 2023 - Administrative Adjustment To Contact Information. Provided Updated Contact Information. 09 July 2023 - The Contracting Officer Is Suspending Submission Eligibility Until Further Notice; All Prior Submission Are Retained By The Contracting Office Until Such Time As The Contracting Officer Proceeds With Award Of Current Agreement Applications. 07 June 2023 - Added Draft Bpa Document 19 May 2023 - Posting Questions And Answers #5 & #6. 18 May 2023 - Added Instructions To Interested Parties, Questionairre, Updated Capabilities Matrix, Published Elin, And Published Pws 23 March 2023 - Added Responses To Rfis Submitted Via E-mail To The End Of The Notice. 7 March 2023 - Solicitation Release Is Delayed Due To Ongoing Revisions. The Contracting Officer Will Notify All Interested Contractors Upon Issuance Of The Solicitation.   notice Of Intent- Indo-pacific Theater Wide Bpa description Of Blanket Purchase Agreement (bpa): the 921st Contracting Battalion (cbn), 413th Contracting Support Brigade (csb), Located At Wheeler Army Airfield, Hi Intends To Solicit For Prime Contractors In Order To Provide Non-personal Supplies And Services At Multiple Locations Throughout The Indo-pacific. The Intent Of This Bpa Is To Provide A Long-term, Contractual Logistics Solution For Multiple Countries. .contract Type: awarded Bpa Calls Will Be Firm-fixed-price (ffp) Type Contracts. This Contract Type Provides For A Price That Is Not Subject To Any Adjustment On The Basis Of The Contractor’s Cost Experience In Performing The Contract. This Contract Type Places Upon The Contractor Maximum Risk And Full Responsibility For All Costs And Resulting Profit Or Loss. catagories Of Performance: base Life Support transportation And Material Handling (land And Marine) general Support And Port Services (handling And Husbandry) field Feeding Services conference Support (non-lodging) construction Materials And Equipment (bill Of Materials) miscellaneous Supplies bpa Geographic Coverage Area: See Capabilities Matrix *performance Under Subsequent Agreements Excludes The United States And Its Territories. **performance Within The Korean Peninsula Is Subject To Agreement And Concurrence From The 411th Contracting Support Brigade (korea). bpa Ordering Period: Bpa Will Remain In Effect For A Period Of Ten (10) Years From The Date Of Issuance And Subject To Annual Review And/or Supplemental Agreement. instructions To Interested Parties to Be Considered For The Award Of An Agreement, Contractors Shall Submit Their Response With The Following Items: 1)    experience Statement (resume) (for No Less Than Three And Not More Than Five International Contract Performances) Including: Event Title, Dates Of Performance, Locations Of Performance, Services Rendered, And A Reference (name, E-mail, And Phone Number) For Your Performance Quality. 2)    Capabilities Matrix Attachment Identifying What Countries And Capabilities (by Clin) That They Can Provide Services. 3)    vendor Questionairre. sam Registration/responsibility – The Government Requires Sam Registration And Completion Of All Required Representations And Certification For Award Consideration. Failure To Complete Full Registration (i.e. Certifying 52.204-26) Will Result In Your Submission Being Considered Non-responsive. all Documents Must Be Submitted To The Following E-mail Address For Consideration: usarmy.shafter.413-contr-spt-bde.list.921st-cbn-cspo@army.mil  evaluation Factors For Award 1 - Past Performance – Contractors Requesting Blanket Purchase Agreements Under This Solicitation Will Be Evaluated Utilizing Government Past Performance Databases Including But Not Limited To Sam, Fapiis, And Sprs For Past Performance Ratings That Constitute Unacceptable Risk To The Government. Unfavorable Past Performance Is Constituted By One Or More Marginal Or Unsatisfactory Ratings In The Preceding Three Years Where The Contractor Does Not Adequately Address Unsatisfactory Performance Recorded In Sam.gov And The Procurement Integrated Enterprise Environment (piee). 2 - Technical Capability – Contractors Requesting Blanket Purchase Agreements Under This Notice Will Be Evaluated For Their Ability To Perform One Or More Of The Capabilities Provided In The Schedule As A Prime Contractor (managing Both Organic And Subcontractor Capabilities). Contractor Are Responsible For Providing A Capabilities Statement And Vendor Questionnaire With An Experiential Record For The Preceding Three With Successful Management Of Local Subcontractors To Accomplish Performance Objectives Related To Commercial Contracts. -at The Call Level- price - Contractors Requesting Blanket Purchase Agreements Under This Solicitation Will Compete For Performance At The Call Level. Calls Shall Be Evaluated For Price, Or Price And Other Factors Pursuant To Far 13. technical And Past Performance, When Combined, Are Significantly More Important For Award Of A Blanket Purchase Agreement.   individuals Authorized To Purchase Under The Bpa: any Warranted 413th Contracting Support Brigade Contracting Officer (ko) Is Authorized To Solicit And Award Bpa Calls Against This Bpa. purchase Limitations Under This Bpa: blanket Burchase Agreements Are Not Constrained By A Dollar Threshold; Calls Issued Subsequent To Agreements Are Constrained By The Thresholds Specified In Far 13.5. solicitation / Closing Response Date: This Is A Continuous Open Notice For Interested Parties To Be Considered For Agreements And Addition To Known/approved Vendor Lists For The Usindopacom Area Of Operations. It Remains In Effect Until Cancelled By The Contracting Officer Or Superceded By A Subsequent Notice. release Of Information: a High Level Of Business Security Must Be Maintained In Order To Preserve The Integrity Of The Acquisition Process. Contracting Officials May Make Available Maximum Information To The Public, Except Information: (1) On Plans That Would Provide Undue Or Discriminatory Advantage To Private Or Personal Interests; (2) Received In Confidence From An Offeror; (3) Otherwise Requiring Protection Under Freedom Of Information Act Or Privacy Act; Or (4) Pertaining To Internal Agency Communications (e.g., Technical Reviews, Contracting Authority Or Other Reasons, Or Recommendations Referring Thereto). This Policy Applies To All Government Personnel Who Participate Directly Or Indirectly In Any Stage Of The Acquisition Cycle. industry Request For Information Responses: (notice Responses May Be Subject To Change Pending Publication Of The Solicitation): q1 – Is It Acceptable To Propose Servicing A Specified Portion Of The Geographic Area, Or Will A Proposal Need To Be Made To Cover The Entire Geographic Area Listed In The Proposal? a1 - The Evaluation Criteria Are Currently Under Review; It Is Currently Planned To Provide A Capabilities Matrix (government Furnished Template) That Contractors Will Submit With Their Agreement Package For Evaluation To List Areas Support Capabilities By Region. The Government Has Yet To Determine If This Will Be Used As An Evaluation Criterion. q2 – What Is The Scope Of Services Being Requested For: field Feeding Services, conference Support (non-lodging), construction Materials And Equipment (bill Of Materials), miscellaneous Supplies a2 - The Finalized Elin And Pws Is Pending Approval And Will Be Diseminated Via Solicitation Providing The Scope Of Each Service. The Lines Of Effort In Question Are Overarching And Include A Variety Of Sub-lines That Are Currently Pre-decisional. The Proposed Agreement Under Far 13 Is Conseptually Broad In Scope To Allow Its Application In A Variety Of Circumstances. q3 – Is Updated Response Due Date 03apr23? a3 - This Notice Does Not Currently Contain An Rfq. The Anticipated Response Due Date Is Deleted And "to Be Determined" Subject To The Issuance Of The Rfq. q4 - is It Possible To Have The Information About The Current Incumbent Or Any Relevant Past Performance For This Contract? a4 - this Is A New Effort To Consolidate Performance Across The Pacific To Establish A Prime Vendor Base That Can Provide Support Across The Pacific. As This Isn’t A Recomplete, No Historical Data Is Available And There Is No Incumbent. q5. When Is Due Of Submission Of Instructions To Interested Parties(1. Expereince Statement, 2. Capabilites Matrix Attachment And 3. Vendor Questionnaire)? a5. There Is No Due Date... This Is An Open Announcement For Parties Interested In Participating. q6. On Sam Website, It Shows That Updated Response Date As Dec 31, 2027 12:00 Am Hst. Please Confirm. a6. Sam Requires A Response Date. The Items Requested Are For Qualification Purposes, Not Comparative Analysis. There Is No Cutoff Date, But The Office May Suspend Or Cancel The Announcement If It Is In The Best Interests Of The Government.

Details: Grid Research Integration And Deployment Center technology Collaborations For Us Power Electronics Industries oak Ridge National Laboratory (ornl) Is Seeking Industry Partners To Participate In Short-term, Collaborative Projects Within The Grid Research Integration And Deployment Center (grid-c) To Accelerate Development And Deployment Of Grid Integrated Power Electronics Technologies. This Opportunity Will Provide Selected Participants Access To Ornl's Experienced Staff And Unique Equipment And Capabilities To Demonstrate Advanced Concepts With Intent To Develop And Deploy Innovative And Energy Efficient Power Electronics For Electrified Grid Integration And Modernization. description ut-battelle, Llc, Acting Under Its Prime Contract No. De-ac05-00or22725 With The U.s. Department Of Energy (doe) For The Management And Operation Of The Oak Ridge National Laboratory, Conducts Research And Development In Support Of The Doe Transformer Resilience And Advanced Components (trac) Program Of The Office Of Electricity (oe). The Doe Trac Program Partners With Industry, Small Business, Universities, And Other Stakeholders To Identify And Invest In Innovative Technologies With The Potential To Accelerate The Integration Of Grid Systems And Clean Energy Resources Through Power Electronics Technologies, As Well To Enhance The Global Competitiveness Of The United States. ornl Is Requesting Cost-shared Proposals From Industry To Develop Next Generation Technologies For Grid Modernization To Support The Mission Of Oe And Trac For Reliable, Resilient, And Secure Electricity Delivery Systems. As Part Of The Proposals Submitted Under This Announcement, The Proposers Are Expected To Describe The Enabling Technologies As Well As Potential Energy Savings And Novel Non-energy Impacts That May Be Realized By The Targeted Project. technology Areas Of Interest materials & Components: For Grid Devices, Power Electronics Systems, Grid Storage Devices embedded Controllers: Integrated Advance Analog And Digital Electronics, Sensing Devices subsystems Devices And Interfaces: Converter, Inverter, Controls And Protection, Prototypes, Solid State Components Protection, Transformers resource Integration & Management Systems: Mutli-stage Converters, Software Platforms, Algorithms grid Systems Architecture: Real Time Systems Modelling And Evaluation grid Modelling And Transient Analysis projects Will Be Conducted During A Short-time Period. At Least 20% Cost Share, Which Can Be Funds-in To Ornl Or In-kind Contributions (e.g., Facilities, Services, And Staff Time), Is Required On The Part Of The Industrial Participant. Participant Cost-share Cannot Be Met Using Funds From U.s. Government Sources. Funds Will Not Be Provided To The Industrial Participant By Ornl.the Intent Is To Increase The In-kind Cost Share From 20% To 50% In The Future, That Timing To Be Determined And Approved By The Trac Program. note: This Is Not A Procurement Request. eligibility eligibility Is Limited To Industries That Currently Manufacture In The U.s. For Commercial Applications In The Residential Or Commercial Grid Hardware And Power Electronics Market, Or To Industries That Will Be Able To Do So As A Direct Result Of These Collaborative Efforts. There Is No Restriction Based On The Component Or Grid Technology Area, But Should Align With Facilities, Expertise, And Capabilities Of Ornl’s Grid-c. background the Grid Research Integration And Deployment Center (grid-c) At Ornl Offers Access To Distinctive World-leading Capabilities Bringing Together Electrification For Utilities, Buildings, And Transportation Sectors To Support Integration Of Grid Systems And Clean Energy Resources As Well As Leveraging Advanced Manufacturing Capabilities At Ornl’s Manufacturing Demonstration Facility (mdf). Grid-c Embodies This Combination With Research And Development In Power And Energy System, Power Electronics, Components, Controls, Real-time Platforms, Simulation, Modeling, And Cybersecurity To Provide A Vertical Integration To Support Demonstration Of Modernization, Security, And Resiliency For Grid Systems Integration And Clean Energy Resources. Ornl’s Expertise In Power Electronics And Controls, Materials, And Hardware/software Integration Will Assist The Power Electronics Industries In Accelerating The Improvement Existing And Developing New Innovative Technologies. more Information About The Ornl Grid-c Can Be Found At: Https://www.ornl.gov/content/grid-c-labs from Concept To Commercialization, Ornl's World-leading Facilities And Expertise Enable Research Focused On Reducing The Energy Intensity Of U.s. Industry, Supporting Development Of New Products, And Strengthening Our Nation's Clean Energy Economy To Meet The Commercial And National Security Needs Of Tomorrow. objective the Objective Of These Grid-c Technical Collaborations Is To Collaborate With Industry To Investigate, Improve, Develop, And Deploy Innovative Integrated And Resilient Grid Resources For Further Intelligent Electrification At The Grid Interfaces. In So Doing, Creating And Preserving Domestic Jobs Is A Goal Of This Solicitation. the Primary Focus Of This Announcement Is To Target Projects That Will Impact The Following Technical Areas: materials & Components: For Grid Devices, Power Electronics Systems, Grid Storage Devices embedded Controllers: Integrated Advance Analog And Digital Electronics, Sensing Devices subsystems Devices And Interfaces: Converter, Inverter, Controls And Protection, Prototypes, Solid State Components Protection, Transformers resource Integration & Management Systems: Mutli-stage Converters, Software Platforms, Algorithms grid Systems Architecture: Real Time Systems Modelling And Evaluation grid Modelling And Transient Analysis within These Technical Areas, The Target Projects Could Be Related To Hardware Or Software Design, Application Or Use Case Development, Modeling And Simulation For Impact Of System Integration, Test And Evaluation Of Proposed Technology, Controls, Or Solutions, Or Small-scale Prototyping In A Relevant Environment. laboratory Support it Is Anticipated That Industrial Partners Will Work Collaboratively With Members Of The Ornl Staff To Conduct Project Activities Across The Various Areas Of Expertise Within Grid-c. intellectual Property And Proprietary Data projects Will Be Performed With A Cooperative Research And Development Agreement (crada) As The Contract Instrument. See The Announcement Package For A Sample Crada Agreement. Doe And Ornl Respect The Importance Of Industry's Intellectual Property And Data Security While Balancing The Need To Document The Benefits Of Public Expenditures. Provisions Relating To Proprietary Information And Intellectual Property Are Set Forth In The Crada. A Non-disclosure Agreement (nda), If Required, Can Be Put Into Place During Development Of The Project To Facilitate Discussions While Protecting The Partner's Proprietary Information. it Is Preferred That Proprietary Information Not Be Included In The Proposal. If Company Proprietary Information Is Included In The Proposal, The Specific Information Should Be Marked As Such, And Ut- Battelle/ornl Will Treat That Information As Business Confidential. proposal Guidelines proposals Should Be Completed Using The Attached Template In The Announcement Package. proposers Are Encouraged To Consult With Ornl Technical Staff To Develop A Work Scope That Is Technically Feasible And Compatible With Ornl Facilities And Capabilities. proposal Deadline And Submission this Announcement Will Remain Open Subject To Availability Of Funding From The Doe Transformer Resilience And Advanced Components Program. completed Proposals Must Be Submitted Inpdffile Format By Email To Gridccollaborations@ornl.gov. The Subject Line Should Include: Ornl Grid-c Technology Collaborations. Receipt Of Proposals Will Be Confirmed Within One Week Of Submission. proposal Evaluation And Timeline this Is An Open Announcement. Selection Of Winning Proposals Will Be At The Discretion Of The Doe Trac. Proposal Evaluation Criteria Will Include Compatibility With Ornl Facilities And Capabilities, Technical Feasibility And Merit, The Potential To Commercialize New Products And Create Us Jobs, And The Potential For Improvement To Grid Components, Electrification, And Integration. Trac Reserves The Right To Select All, A Portion, Or None Of The Submissions. point Of Contact all Questions Relating To This Announcement Should Be Directed To Dr. Madhu Chinthavali By Email, Chinthavalim@ornl.gov, Or By Phone, (865) 341-1411. cooperative Research And Development Agreement (crada) Information awardees Are Required To Enter Into A Short-form Crada With Ut-battelle. Because Of The Need For Accelerated Placement And Execution Of The Projects, The Most Favorable Terms Allowable Within Doe Guidelines Have Been Established And Will Not Be Subject To Negotiation. Failure To Enter Into A Crada In A Timely Manner Will Result In Termination Of Further Project Consideration. Cradas Have Provisions That Address The Protection Of The Partners' Existing Proprietary Information And Intellectual Property, As Well As The Information And Intellectual Property Generated And Made During The Collaboration. More Specifically, Each Party Owns Its Own Inventions While Jointly Developed Inventions Will Be Jointly Owned. In All Cases, U.s. Government Will Retain Government Use Rights. Crada Durations Are Expected To Be At Least One Year. for More Specific Terms And Conditions, Please Review The Model Short-form Crada Attached To This Announcement.