Transportation Tenders

Details: This Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation Part 12, Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation. Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. The Contracting Officer Is Utilizing Policies And Procedures Prescribed In Part 12, Acquisition Of Commercial Products And Commercial Services. Solicitation Number Rfq 45310025q0008 Is Issued As A Request For Quotation (rfq). The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-01 Effective On November 12, 2024. Convention Centers, Hotels, And Other Full Service Facilities That Can Satisfy The Requirements Listed Below Are Encouraged To Submit A Quotation. Quotations From Third-party Entities Will Not Be Considered. This Solicitation Is Considered An Unrestricted Procurement. the U.s. Equal Employment Opportunity Commission Office Of Field Programs, State, Local And Tribal Programs Has A Requirement For A Contractor To Provide Meeting Facilities, Rental Of Audio Visual Equipment/support Services, Food And Beverages, Business Services And Lodging To Conduct A Four-day Joint Fepa-tero Conference. The United States Equal Employment Opportunity Commission (eeoc) Is Conducting A Joint Training Conference For Fair Employment Practices Agencies (fepas) And Tribal Employment Rights Offices (teros). the Government Anticipates With A Minimum Of 225 Attendees And An Anticipated Maximum Of 250 Attendees. To Be Eligible For Consideration, The Contractor’s Proposed Facility For The Seminar Must Be Located In Downtown Phoenix, Arizona. the Government Contemplates The Award Of A Firm-fixed Price (ffp) Contract. the Quotation Package Shall Include The Following Line Items In A Written Quotation: (fy 2025): Contract Line Item Number: Clin 0001, Rental Of Conference Space – Quantity 4 Days Each (see Below List Of Conference Space Requirements), Unit Price $ , Total Clin 0001 $ ; clin 0002, Food And Beverage Services (see Below List Of Food And Beverage Requirements, Unit Price $ Per Person Rate Per Day, Unit Price $ , Total For Clin 0002, $ . clin 0003, Rental Of Audio Visual Equipment And Technical Support – Quantity 4 Days Each (see Below List Of Audio Visual Requirements), Unit Price $ , Total For Clin 0003 $ ; clin 0004, Business Services Expenses – 4 Days (see Below List Of Business Services Requirements), Unit Price $ ____, total For Base Period Clin 0004 $ . Total Price For Clins 0001 Through 0004: $ the Preferred Dates For Consideration In Order Of Preference June 1-june 5, 2025 (1st Choice), June 8-june 12, 2025, (2nd Choice), And July 13-july 17, 2025 (3rd Choice). please Indicate Availability For Each Date In The Technical Portion Of The Quotation. No Other Dates Or Combination Of Dates Will Be Considered By The Government. the Conference Provides For Meeting Space For Training Sessions, Along With Food And Beverage Service For Buffet Breakfast, Buffet Lunch, And Morning And Afternoon Breaks. Registration Starts Monday From 8:30am To 4:30pm Et. The Conference Starts Tuesday And Wednesday 7:30 Am To 6:00 Pm Et, Thursday, 7:30am To 1:30pm Et. a Contract Will Be Awarded To The Responsible Quoter Whose Quotation Represents The Best Value To The Government. The Prospective Contractor Must Be Registered In The System For Award Management (sam) Database At The Time The Quotation Is Submitted. Registration Is Free And Can Be Completed On-line At Http://www.sam.gov. Each Quotation Must Clearly Indicate The Capability Of The Quoter To Meet The Requirements Specified In This Combined Synopsis/solicitation. general Requirements: The Following Requirements For The Training Facility Are Specified In Terms Of Minimum Requirements. Accessibility: Americans With Disabilities Act (ada) Requirements: All Facilities, Including Training Rooms And Rest Rooms And Audio-visual Equipment, Must Be Fully Accessible To Individuals With Disabilities In Compliance With The Americans With Disabilities Act Amendments Act. Accommodations For Disabled Individuals May Include, But Are Not Limited To, Accessible Parking Spaces, Elevators, Adequate Sound Systems, Wide Aisles And Wheelchair Ramps. A Site Visit May Be Conducted By The Disability Business And Technical Assistance Centers (dbtac) Prior To The Award Of The Contract. Parking: There Must Be Adequate Free Or Low Cost On-site Parking For All Participants. Confirmation Policy: The Eeoc Anticipates The Need For Sleeping Rooms On Sunday Through Thursday. Eeoc Will Require The Hotel Contact Person To Provide A Listing Of Registered Participants With Reserved Sleeping Rooms Prior To The Lodging Date To Verify The Rooming List As It Develops. Amendments And/or Substitutions May Be Necessary. description Of Facility And Minimum Requirements the Following Requirements For Lodging And Conference Space Are Minimum Requirements: Lodging: Guest Rooms Shall Be Located Onsite. The Facility Shall Be Centrally Located Within No More Than Three Blocks Walking Distance Of Area Retail, Restaurants, And Attractions. The Contractor Shall Provide A List Of All Local Restaurants Within A Ten-minute Walk From The Contractor’s Facility. lodging Payment Arrangements: Participants Will Contact The Hotel Individually To Obtain Room Scheduling And Shall Be Responsible For Payment Of Individual Guest Rooms And All Incidental Charges Upon Checkout. Payment Amount For Lodging Cannot Exceed, On A Daily Basis, The Maximum Per Diem Rate In Effect In Accordance With The Federal Travel Regulations Including Taxes, Gratuities, And Other Costs. Charges For Incidental Expenses Such As Telephone Charges And Room Service Will Be The Responsibility Of Individual Guests. local Transportation: The Contractor Shall Also Provide A List Of Options For commuting From And To All Airports And Railroad Stations (if Applicable) Within The area. If The Contract Facility Provides Shuttle Service, Contractor Shall Indicate If the Service Is Free Or What The Fee Is For The Service. Also, Indicate If The Shuttle service Is Wheelchair Accessible. room Rate: The Contractor Shall Provide The Sleeping Rooms For Eeoc Staff And Presenters At Or Below The Federal Government’s Domestic Per Diem Rate Which Is Available On-line At Http:/www.gsa.gov. The Facility Will Not Require Advance Payment From Conference Participants Covering The First Night Of Lodging. Guest Rooms Shall Be Located Within The Same Building As The Meeting Rooms. guest Rooms: Individual Travelers Will Schedule And Pay For Their Guest Room Nights. The Schedule And Range Of Guest Rooms Anticipated For This Conference Are As Follows: sunday, 35 Sleeping Rooms monday, 250 Sleeping Rooms tuesday, 250 Sleeping Rooms wednesday, 250 Sleeping Rooms thursday, 65 Sleeping Rooms friday, 0 Sleeping Rooms clin 0001 – Conference Space – Meeting Facilities: All Meeting Rooms Shall Be Wheelchair Accessible. The Meeting Facility Shall Be Available For Consecutive Nights And Consecutive Days As Specified Below: conference Will Be Held Monday Through Thursday On The Dates Provided Previously. the Following Meeting Spaces/rooms Shall Be Available Throughout The Conference: registration Area: Registration Area Shall Be Near The Main Plenary Room(s) And Will Include Two Skirted Eight-foot Tables, Configured As Follows: Two Tables Next To Each Other To Accommodate Training Materials. The Facility Shall Provide Signage Identifying The Conference Location Within The Hotel. Set Up Shall Be Completed By 12:00 P.m. Et On Monday. The Registration Area Must Remain Set Up And Available Throughout The Duration Of The Conference. secured Office/working Room: A Secure Office Or Working Room Is Needed Where Conference Materials Can Be Assembled, Sorted, And Stored. This Will Also Be Used As A Work Area For Staff. The Room Must Include At Least Two Six-foot Tables And Trash Receptacles. Telecommunication Requirements Include Electrical Outlets And Internet Access. two Plenary Meeting Rooms: Large Plenary Meeting Room Shall Accommodate Up To 250 People Set In Classroom Style With No More Than Two People Per Six-foot Tables Or 3 People Per Eight-foot Tables Which Are Covered And Skirted. Spacing Between Rows Of Seating Shall Be sufficient For Easy Wheelchair Access. Two Six-foot, Covered And Skirted Head Tables On A Stage With Four Moveable Chairs And Podium With Microphone. The Stage Shall Have Steps With A Handrail On One Side And Shall Be Wheelchair Accessible With A Low To Moderate Incline. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available Between 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. medium Plenary Meeting Room Shall Accommodate Up To 100 People Set In Classroom Style With No More Than Two People Per Six-foot Tables Or 3 People Per Eight-foot Tables Which Are Covered And Skirted. Spacing Between Rows Of Seating Shall Be Sufficient For Easy Wheelchair Access. two Six-foot, Covered And Skirted Head Tables On A Stage With Four Moveable Chairs And Podium With Microphone. The Stage Shall Have Steps With A Handrail On One Side And Shall Be Wheelchair Accessible With A Low To Moderate Incline. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available Between 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. breakout Rooms: Four Breakout Rooms To Accommodate At Least 65 People Each, Set In Classroom Style With No More Than Two People Per Six-foot Table Or 3 People Per Eight-foot Table Which Are Covered And Skirted Or Round Tables Of 6-8 People Per Table. Each Table Shall Contain Writing Paper, Pens, Ice Water With Glasses, Candy Or Mints For Participants. Tables Shall Be Refreshed For Afternoon Sessions. All Chairs Shall Be In Working Order, Free From Soil And Able To Move Easily. There Shall Be Enough Space Between Tables To Maneuver A Wheelchair. The Hotel May Provide The Large Plenary Meeting Room And Medium Plenary Meeting Room As Two Of The Four Breakout Rooms. All Breakout Rooms Will Be Available 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. small Group Meeting Room: This Meeting Room Shall Accommodate Up To 30 People Set In A U-shape Style With Tables That Are Covered And Skirted. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available 8:00 Am – 7:00 Pm Et On Monday; 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday; And 7:30 Am – 6:30 Pm Et On Thursday. all Meeting Rooms Must Have A Suitable Sound System So All Participants May Hear And Ask Questions Of The Speakers. Both Meeting Rooms Should Be Arranged Classroom Style With Chairs And Tables For Writing And Handouts. All Chairs And Tables Shall Be In Acceptable Condition (the Furniture Is Not Broken, Soiled, Rusted Or Damaged In Any Way That Would Injure The Individual Or Damage Clothing). Aisle Space, Including The Space Between Tables And Desk, Need To Be Accessible For Persons In A Wheelchair. Walls Should Be Constructed In Such A Manner That They Confine Inside Sound And Reduce Or Prevent The Transmission Of Extraneous Sound. Both Rooms (including Luncheon Area) Should Be Equipped With A Working Sound System Which May Be Controlled By The Speaker And Which Projects Equally To All Areas Of The Room. Rooms Should Be Configured To Allow Every Participant A Clear View Of The Speaker And All Visual Aids. Each participant Should Have A Clear View Of At Least One Of The Projection Screens In Use. Rooms Should Be Well Lit To Accommodate Extensive Reading And Writing And All Lighting Should Be Uniform And Should Not Produce A Glare. Heating And Air Conditioning Should Provide A Comfortable Level Of Air Quality And Room Temperature When Rooms Are At The Maximum Capacity. Rooms Should Be Refreshed After Each Session And Debris Removed. clin 0002 – Food And Beverage Service: Buffet Breakfast To Be Served On Tuesday, Wednesday, And Thursday Between [approximate Time Of Service: 7:30 A.m. And 9:00 A.m. Et] And To Include A Protein (such As Eggs And/or Meat), A Potato Dish, Assorted Pastries, Breakfast Breads, Bagels And Cream Cheese, Sliced Fresh Fruit And Yogurt, Freshly Brewed Coffee, Decaffeinated Coffee, Tea, Hot Water And Assorted Fruit Juices. morning Break To Be Served On Tuesday, Wednesday And Thursday Between [approximate Time Of Service: Tbd] And Shall Include, At A Minimum Refresher Of Coffee, Tea And Water. buffet Luncheon To Be Served On Tuesday And Wednesday Between [approximate Time Of Service: 11:45 A.m. And 1:15 P.m. Et]. Buffet Shall Be Set Up Outside The Large Plenary Meeting Room And Individuals Will Be Permitted To Bring Food Back Into The Large Plenary Meeting Room For Consumption. Typical Lunch Must Consist Of Chicken Or Comparable Entree, Seasonal Vegetables (an Offering Sufficient To Serve As Main Meal For Vegetarians And Vegans), A Starch, Bread Or Rolls/butter, Dessert, Juices, Coffee, Decaffeinated Coffee And Iced Tea. Please Provide Recommended Lunch Buffet Menus, With Prices Per Person Served With Regular And Decaffeinated Coffee, Water And Tea (iced Or Hot). afternoon Break Is To Be Served On Tuesday And Wednesday Between [approximate Time Of Service: Tbd] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips. Provide Recommended List Of Beverages And Snacks And Their Related Prices. small Group Food And Beverage – Only Needed On Monday And Thursday Afternoon [approximate Time Of Service: Tbd]. The Estimated Number Of People Receiving This Service Is Up To 30 People And Is Subject To Change. small Group Breakfast To Be Served On Monday Between [approximate Time Of Service: 7:30 a.m. And 9:00 A.m. Et] And To Include A Protein (such As Eggs And/or Meat), A Potato Dish, Assorted Pastries, Breakfast Breads, Bagels And Cream Cheese, Sliced Fresh Fruit And Yogurt, Freshly Brewed Coffee, Decaffeinated Coffee, Tea, Hot Water And Assorted Fruit Juices. Please Provide Recommended Breakfast Menus, With Prices Per Person Served. small Group Luncheon To Be Served On Monday Between [approximate Time Of Service: 11:45 a.m. And 1:15 P.m. Et]. Typical Lunch Must Consist Of Chicken Or Comparable Entree, Seasonal Vegetables (an Offering Sufficient To Serve As Main Meal For Vegetarians And Vegans), A Starch, Bread Or Rolls/butter, Dessert, Brewed Coffee, Decaffeinated Coffee, Juices And Iced Tea. Please Provide Recommended Lunch Menus, With Prices Per Person Served. small Group Afternoon Break Is To Be Served On Monday [approximate Time Of Service: Tbd Et] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips. Provide Recommended List Of Beverages And Snacks And Their Related Prices. small Group Afternoon Break Is To Be Served On Thursday [approximate Time Of Service: Tbd Et] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips And A Hot Or Cold Food Item. Provide Recommended List Of Beverages, Snacks And Hot Or Cold Food Item And Their Related Prices. quoter Should Also Submit An All-day Food And Drink Package With A Per Person Rate Per Day. All Food And Beverage (f&b) Services Need To Be Located In Areas Accessible To Individuals With Disabilities. The Luncheon Should Be Arranged So That All Individuals Can Be Seated And Served Sufficiently. pricing For Food And Beverages Shall Include The Price For The Item(s), Plus The Gratuity (service Charge), And A Statement From The Contractor Indicating Whether The U.s. Government Is Exempt From State Tax, If Applicable. The Eeoc Is A Tax Exempt Federal Agency; Please Do Not Include Any Sales Tax In Quotations For Which The Federal Government Is Exempt. the Contracting Officer Representative (cor) Will Contact The Contractor Within 72 Hours Of The Event To Confirm The Number Of Participants. The Contractor Shall Provide Food And Beverage For A Minimum Of 250 Participants Each Day. The Contractor Shall Invoice The Eeoc At The Agreed Upon Rates For Meeting Room Rental, Audio Visual Equipment, Food And Beverages, And Business Services. Charges For Food And Beverage Service Shall Be Reflected On The Invoice As The Cost Incurred Per Person. clin 0003 – Rental Of Audio Visual Equipment And Technical Support: The Following Services And Audiovisual Equipment Will Be Required: large Plenary Meeting Room – Needed On Tuesday, Wednesday And Thursday. podium With Wired Microphone; Laptop Computer With Internet Connection [1 Each] hand-held Cordless Microphone [2 Each] table Top Microphone For Table Next To Podium [3 Each] mixer With Sufficient Tracks To Amplify Speech And Sound Audible To Entire Audience Gathered In The Meeting Room. projection Package Linked To Podium Laptop Computer. projection Screens Appropriate For Size Of Meeting Room [2 Each] av Package (movable Cart, Power Cord And Power Strip) technical Assistance In Setting Up All Equipment, Including Splitters In Order To Assure That All Registrants Can Hear And See All Presentations. equipment And Av Package Including A Technician To Enable Live Streaming Of Plenary Speaker(s) To Audience Participating Remotely. av Technician To Monitor And Maintain Speech And Sound At Audible Levels During Meetings Held In Meeting Space. medium Plenary Meeting Room – Needed On Tuesday, Wednesday And Thursday. podium With Wired Microphone; Laptop Computer With Internet Connection [1 Each] hand-held Cordless Microphone [2 Each] table Top Microphone For Table Next To Podium [3 Each] mixer With Sufficient Tracks To Amplify Speech And Sound Audible To Entire Audience Gathered In The Meeting Room. projection Package Linked To Podium Laptop Computer. projection Screens Appropriate For Size Of Meeting Room [2 Each] av Package (movable Cart, Power Cord And Power Strip) technical Assistance In Setting Up All Equipment, Including Splitters In Order To Assure That All Registrants Can Hear And See All Presentations. av Technician To Monitor And Maintain Speech And Sound At Audible Levels During Meetings Held In Meeting Space. breakout Room(s) – Needed On Tuesday, Wednesday And Thursday. If Hotel Only Provides Two Additional Breakout Rooms, Hotel Will Allow For Large Plenary And Medium Plenary Rooms To Be Repurposed For The Use Of Serving As Breakout Rooms. requirements For Room: podium With A Hand-held Wireless Microphone That Can Attach To The Podium. [1 Each] projection Screen Appropriate For Size Of Meeting Room [1 Each] av Package (movable Cart, Power Strip And Cord). small Group Meeting Room – Needed On Monday And Thursday. Requirements For Room: projection Screen Appropriate For Size Of Meeting Room [1 Each] projection And Av Package To Allow For Laptop To Be Connected And Projected On To Screen. the Contractor Must Submit A Detailed Pricelist For The Audio-visual Equipment And Technical Support, Including High Speed Wireless (wi-fi) Internet Access, And Electrical connections. Also, Include The Price For The Items, Inclusive Of An Hourly Rate And The Number Of Labor Hours With Breaks Included In A Day Rate For Audio Visual Support Services (if Needed), Plus The Gratuity/service Charge. clin 0004 – Business Services. Wi-fi Access For Presenters In Meeting Spaces: High Speed Wi-fi Connectivity For Presenters In All Meeting Spaces (large Plenary, Medium Plenary, Breakout Rooms, Small Group Meeting Room, Secured Office/working Room). business Center: Business Office Support (copying, Faxing, Etc.) May Be Required Throughout The Conference. Hotel Must Provide A Pricing List For Copying, Faxing, Shipping, And Receiving Charges For The Hotel To Include Any Surcharges And Taxes. receipt And Storing Of Materials: The Hotel Shall Have Procedures And Facilities In Place To Receive And Store All Conference Materials Shipped In Overnight Mail. Charges For This Service Shall Be Included In The Business Center Charges. pre-conference Meeting And Conditions: A Pre-conference Meeting Either Via Telephone, Zoom/teams, Or In-person To Be Held At The Contractor’s Facility To Discuss The Objectives Of The Conference, Meet Staff Responsible For Implementing The Contract And Address Any Questions Regarding Elements Of The Statement Of Work, Within A Mutually Agreed Upon Time Prior To The Start Of The Conference. signage: Signs And Floor Plans Directing Participants To The Meeting Rooms Shall Be Provided By The Facility. This Shall Include A Daily Electronic Announcement Board, Announcing The 2025 Joint Eeoc-fepa-tero Training Conference. The Electronic Board Shall Easily Be Visible To Participants And Identify Meeting Room Locations. other: It Is Anticipated That Some Additional And/or Miscellaneous Expenses Might Be Incurred During The Conference Such As Service And Set Up Charges, Electrical Hook-up Fees, And Other Necessary But Unpredictable Expenses Which May Arise During The Conference. All Anticipated Charges For Additional Work Or Deliveries Of Requirements Outside Of Those Stated In The Government Contract Must Be Approved By The Cor And Communicated To The Government’s Contracting Officer In Writing Prior To Acceptance Of The Related Invoice And Payment Processing. the Facility Shall Agree To Allow The Eeoc To Bring In Audio-visual And Other Equipment And Connect These To The Facility’s Audio Visual/public Address System, As Necessary. Reporting Requirements pre-award Reporting: In Their Quotation, The Quoter Must Submit A Detailed Breakdown Of All Cost To Include Lodging Rates, Meeting Space, Food And Beverage, Av Equipment, Labor And Service Costs, And Any Other Miscellaneous Charges, Which Are Necessary For The Success Of The Conference. Prior To Conference Reporting: The Contractor Will Provide The Designated Eeoc contact With Online Access To Hotel Reports With Information About Confirmed Room Reservations Or An Electronic List Of All Hotel Confirmation Numbers For All Participants, Staff And Presenters On A Weekly Basis Prior To The Conference. during Conference Reporting: In Addition To Pre-conference Meeting, There Will Be A Daily Reconciliation Of All Charges Incurred With The Eeoc Designated Representative. The Charges Will Include Food And Beverage, Av Equipment And Labor, Telecommunication And Business Center Charges. post Conference: The Contractor Shall Submit A Final Invoice Covering All Charges Within Five (5) Business Days After The Completion Of The Conference. The Contractor Shall Submit A Detailed Report With The Invoice That Consist Of The Following: Room Usage By Date And Attendee, Detailed Av Charges By Meeting Room And A Detailed Breakdown By Day For All Food And Beverage Charges And A Grand Total By Category For Reconciliations Of The Event. Period Of Performance period Of Performance-the Base Period Is From Date Of Award Through Execution Of The Fy 2025 Joint Fepa-tero Conference. contract Administration-inspection And Acceptance the Contracting Officer’s Representative (cor) Under The Resulting Contract Shall Be Designated At The Time Of The Contract Award. method Of Payment: The Preferred Payment Method Is Payment By Government-wide Commercial Purchase Card. The Contractor Is To Apply Charges To Government Purchase Card Only After Final Invoice Has Been Accepted And Reconciled By The Cor. cancellation: Should Eeoc Elect To Cancel This Contract, Eeoc Will Provide A Written Notification To The Contractor No Later Than Sixty (60) Calendar Days Prior To The Scheduled Event. By Receipt Of This Cancellation Notice, The Contractor Agrees To Release Eeoc From Any Cancellation Penalties Or Charges. If There Is A Cancellation Within Sixty (60) Calendar Days Of The Scheduled Event Date, Paragraph (l) Termination For The Government’s Convenience Or (m) Termination For Cause Of Far Clause 52.212-4, Contract Terms And Conditions - Commercial Items Will Govern. submission Of Quotation: All Interested Parties Shall Submit With Their Quotation A Detailed Breakdown Of All Costs To Include Conference Space, Rental Of Audiovisual Equipment And Technical Support, Food And Beverage Service, Business Services, And Any Other Miscellaneous Services And Equipment Which Are Necessary For The Success Of The Seminar. In Addition, A Price Quotation Utilizing Attachment 1, Quotation Response Form, Shall Be Included. Quotations Shall Be Submitted In Three (3) Separate Volumes As Follows: Volume 1 - Technical Capability; Volume 2 - Past Performance; And Volume 3 - Price. Pricing Must Be Submitted Using The Line Item Structure In The Above Schedule Of Supplies And Services Of This Rfq. A Separate Attachment May Be Included In Volume 3 For Pricing Information On Menu Items, Transportation, Parking, Applicable Tax Rates, And Sleeping Room Rates. Your Quotation In Response To Rfq 45310025q0008 Is Due January 17th, 2025 At 12:00 P.m. Et. Quotations Will Be Accepted Via E- Mail. If Electronic Copy Of The Quotation May Be Submitted Via E-mail, Addressed To Melisza.coates@eeoc.gov. questions: Questions Regarding This Request For Quotation Should Be Submitted To Melisza Coates, Contract Specialist Via E-mail At Melisza.coates@eeoc.gov. Telephone Inquiries Or Responses Are Not Acceptable. The Deadline For Submission Of Questions Regarding 45310025q0008 Is January 10, 2025, 12:00 P.m. Et. Any Questions Received After The Above Mentioned Date And Time Will Not Be Considered. The Government Will Not Reimburse Interested Parties For Any Cost Associated With Responding To This Business Opportunity. All Responsible Sources May Submit A Quotation Which Shall Be Considered By The Agency. The Anticipated Contract Award Date Is On Or Before February 28, 2025. basis For Award: The Government Intends To Award A Firm Fixed-price Contract To The Responsible Quoter Whose Quotation Is Responsive To The Solicitation And Is Determined To Be The Best Value To The Government, Using The Tradeoff Approach. Selection Of The Best Value To The government Will Be Achieved Through A Process Of Evaluating The Strengths And Weaknesses Of Each Quoter’s Quotation Against The Below Described Evaluation Criteria. In Determining The Best Value To The Government, The Technical Capability And Past Performance Evaluation Criteria, When Combined, Are More Important Than The Evaluated Price. The Government Is More Concerned About Obtaining A Superior Technical Capability Quotation Than Making An Award At The Lowest Evaluated Price. However, The Government Will Not Make An Award At A Price Premium It Considers Disproportionate To The Benefits Associated With The Evaluated Superiority Of One Technical And Management Quotation Over Another. Thus, To The Extent That Quoter’s Technical And Past Performance Quotations Are Evaluated As Close Or Similar In Merit, The Evaluated Price Is More Likely To Be A Determining Factor. evaluation Factors For Award: The Following Factors Shall Be Used To Evaluate Quotations. These Factors Are Listed In Their Relative Order Of Importance: Technical Capability, Past Performance, And Price. factor I – Technical Capability: contract Requirements quotations Will Be Evaluated On The Quoter’s Ability To Provide All The Contract Requirements Regarding Meeting Space, Food And Beverage, Audio-visual Equipment And Technical Support, Lodging, And Secured Storage. Quotations Must Address The Quoter’s Ability To Meet Ada Requirements For Accessibility As It Relates To Meeting Space, Lodging And Parking. Quotations Will Be Evaluated On The Quality Of The Customer Services Provided, The Layout Design And Quality Of The Facilities As Reflected By The Physical Layout And Atmosphere Of Meeting Space, Amenities Such As Free Wi-fi In The Conference Space, And Upkeep Of The Facilities. location. Quotations Will Be Evaluated On The Ability Of The Quoter To Provide A Facility In Downtown Phoenix, Arizona With Adequate Low Cost Or Free On-site Parking For Participants And Presenters. availability Of Dates. Quoters Will Be Evaluated On The Ability Of The Quoter To Provide The Required Services On The Dates Requested. Additional Consideration Will Be Given To Quoters Who Can Provide The Required Services On The Preferred (1st Choice) Dates. availability Of Government Rates: Quotations Will Be Evaluated On The Ability Of The Quoter To Provide The Required Lodging At Or Below The Government Rate Or Market Value For All Conference Participants And Presenters. meeting Space: Quotations Will Be Evaluated On The Ability Of The Quoter To Provide The Required Meeting Spaces Within The Statement Of Work. factor Ii – Past Performance: the Quoter Must Provide References For A Minimum Of Three (3) Government Or Non-government Contracts Which Provide The Same Or Similar Services; Contract Must Have Been Awarded Within The Past (3) Years. The Information For Each Reference Shall Include The Following: name And Address Of Government Agency And Other Non-government Client; name, Title, Email And Telephone Number Of Contracting Officer Or Other Point Of Contact; name, Title, Email And Telephone Number Of Client’s Program Manager, If Applicable; contract Number, Period Of Performance, And Total Dollar Value Of Contract; And description Of Services Provided. list Any Problems Encountered On Each Contract And The Contractor’s Corrective Actions. eeoc Will Evaluate Past Performance Based On Timeliness, Customer Service And Corrective Actions Taken (if Necessary). A Quoter Without A Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available Will Not Be Evaluated Favorably Or Unfavorably On Past Performance. factor Iii – Price: the Price Quotation Will Be Evaluated Against The Independent Government Price Estimate. Evaluation Of Quotations Will Consider The Following Pricing Information: Pricing Provided For All Line Items Listed In The Schedule Of Supplies And Services Of This Solicitation In The Units And Format Provided. supplemental Agreements – If Any Hotel Submitting A Quotation Has Any Supplemental Agreements, Those Agreements Must Be Submitted With Their Quotation. If The Hotel Requires Signature Of A Supplemental Agreement That Was Not Submitted With The Quotation, The Quotation Will Be Rejected. site Visits: The Eeoc Reserves The Right To Conduct A Site Visit Of All Quoters Who Are Rated To Be Technically Acceptable. The Site Visit Will Review And Evaluate The Same Technical Items Identified In The Technical Capabilities Portion Of The Technical Evaluation Factors. notice: The Government Intends To Evaluate Quotations And Make Award Without Discussions (except Clarifications As Described In Far 15.306(a)). Therefore, The Quoter’s Initial Quote Should Contain The Vendor’s Best Terms From A Price And Technical Standpoint. The Government Reserves The Right To Conduct Discussions, If The Contracting Officer Later Determines Them To Be Necessary. The Government Also Reserves The Right To Conduct A Site Visit Prior To Award. applicable Provisions And Clauses: The Provisions At 52.212-1, Instructions To Offerors – Commercial Products And Commercial Services Applies To This Acquisition. 52.212-2, Evaluation-commercial Products And Commercial Services, The Vendor Shall Include A Completed Copy Of The Provisions At 52.212-3, Offeror Representations And Certifications - Commercial Products And Commercial Services With Your Quote. The Clause 52.212-4, Contract Terms And Conditions-commercial Products And Commercial Services And Clause 52.212-5 Contract Terms And Conditions Required To Implement Statues Or Executive Order-commercial Products And Commercial Services, Clause 52.203.6, Restrictions On Subcontractor Sales To The Government, Clause 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreement Or Statement, Clause 52.204-23, Prohibition On Contracting For Hardware, Software And Services Developed Or Provided By Kaspersky Lab Covered Entities, Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment, Clause 52.204-10 Reporting Executive Compensation And First –tier Subcontract Awards, Clause 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractor’s Debarred, Suspended, Or Proposed For Debarment, Clause 52.209.10, Prohibition On Contracting With Inverted Domestic Corporations, Clause 52.222- 3 Convict Labor, Clause 52.222-19 Child Labor – Cooperation With Authorities And Remedies, Clause 52.222-21, Prohibition Of Segregated Facilities, Clause 52.222-26 Equal Opportunity, Clause 52.222-35 Equal Opportunity For Veterans, Clause 52.222-36 Equal Opportunity For Workers With Disabilities, Clause 52.222-37 Employment Reports On Veterans, Clause 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act, Clause 52.222-41, Service Contract Labor Standards, Clause 52.222- 50 Combating Trafficking In Persons, Clause 52.222-52, Exemption From Application Of The Service Contract Labor Standard To Contracts For Certain Services-certification, Clause 52.226-8 Encouraging Contractor Policies To Ban Texting Messaging While Driving, Clause 52.225-13 Restrictions On Certain Foreign Purchases, Clause 52.232-33, Payment By Electronic Funds Transfer – System For Award Management Are Incorporated By Reference, Clause 52.232-40, Providing Accelerated Payments To Small Business Subcontractors. Clause 52.233-3 Protest After Award And Clause 52.233-4 Applicable Law For Breach Of Contract Claim. to Obtain The Above Provision/clauses In Full Text, Please Visit Https://www.acquisition.gov/far. Method Of Payment: Electronic Funds Transfer. rev. 004_10-01-2018

Details: Contact Information|4|n722.10|b4m|2156972486|jeremy.p.barney.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement|8||||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report Combo.||tbd|n00383|tbd|tbd|see Schedule|tbd||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| warranty Of Supplies Of A Noncomplex Nature (jun 2003)|6|365 Days After Delivery Of Unit|45 Days After Defect Was Found||||| safeguarding Sensitive Conventional Arms, Ammunition, And Explosives (nov 2023)|9|||||||||| equal Opportuity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1,250||||||||||| type Of Contract (apr 1984)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders,delivery Orders And Modifications) Related To The Instant Procurement Areconsidered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or sent By Other Electronic Commercemethods, Such As Email. The Government's Acceptance Of The Contractor'sproposal Constitutes Bilateral Agreement To "issue" Contractual Documents Asdetailed Herein. early And Incremental Deliveries Accepted. all Terms And Conditions Are In Accordance With Boa: N00383-22-g-sh01. \ 1. Scope 1.1 Articles To Be Furnished Hereunder Shall Be Repaired, Tested Andinspected In Accordance With The Terms And Conditions Specified In Therequirements Section Of This Document. 1.2 Unless Expressly Provided For Elsewhere In This Clause, Equipment Suchas Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Orany Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not Be provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced Specification. 1.3 The Use Of Mil-w-81381 Wire In Any Item To Be Delivered Under This Procurement Is Prohibited. The Foregoing Prohibition Applies Notwithstanding Any Reference To Mil-w-81381 Wire That May Be Made In Any Of The Drawings Or Specifications For This procurement. Sae-as22759 Series Wire Shall Be Used In Lieu Of Mil-w-81381 Wire, In Any Place Where Mil-w-81381 Wire Is Cited In This Procurement. Any Questions Concerning This Requirement Should Be Directed To The Procuring Contracting Officer. 1.4 If Mil-std-454 Is Referenced In The Drawings Or In The Specification,the Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c Personnel Performing Tasks In Accordance With Ipc/eiaj-std-001c Shall Be Trained And Certified As Requried By ipc/eiaj-std-001c Paragraph 5.1.4. 2. Applicable Documents - Not Applicable 3. Requirements 3.1 1.0 General 3.1.1 This Statement Of Work (sow) Establishes The Criteria For Repair And Testing /inspection Of The Subject Item. It Includes Inspection, Component Repair And Replacement,reassembly And Testing Procedures Required To Return Units Back Into A Servicable condition. 3.2 2.0 Definitions. 3.2.1 Contractor: Is Defined As The Successful Offeror Awarded A Contract, Orderor Issued A Project Work Order. The Term "contract" Encompasses A Contract, An Order, Or A Project Work Order. 3.2.2 Overhaul: An Overhauled Part Is One Which Has Been Disassembled, Cleaned, Inspected, Repaired As Necessary (by Replacing Or Repairing All Components Which Have Been Found To Exceed Limits Established By The Repair/overhaul Manual) Reassembled And Tested in Accordance With The Approved Repair/overhaul Manual Listed In This Sow And Returned To A Ready For Issue (rfi) Condition (refer To Contract Schedule For Items To Be Overhauled). 3.2.3 Repair: A Repaired Part Is One Which Has Been Restored To A Ready For Issue(rfi) Condition (by Replacing Or Repairing Those Components Found To Be Defective, Broken, Damaged Or Inoperative During The Initial Evaluation And Troubleshooting Phase) And tested In Accordance With The Approved Repair/overhaul Manual Listed In This Sow (refer To Contract Schedule For Items To Be Repaired). 3.3 3.0 Scope 3.3.1 General. The Items To Be Furnished Hereunder Shall Be Overhauled, Upgraded,repaired, Tested, Inspected, And Accepted In Accordance With The Terms And Conditions Specified In This Contract. Unless Expressly Provided Government Furnished Property, including Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Special Test Equipment, Or Any Other Manufacturing Aid Required For The Repair, Manufacture, And/or Testing Of The Subject Item(s) Will Not Be Provided By The Government And shall Be The Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing, Manual, Or Specification For The Contract Items. 3.3.2 Repair Upgrade Requirements:the Contractor Shall Provide The Necessary facility, Labor, Materials, Parts, And Test And Tooling Equipment Required To To Return The Following Items To A Ready For Issue (rfi) Condition: windshield Panel,ai ;74a350002-1025; P/n, ;1560-014471104; Nsn, ;tech Data Found In Boeing Edal; Tech Publications 3.3.3 Rfi Is Defined As That Condition Allowing The Items To Perform Properly And Reliably In An Operational Environment In A Manner They Were Intended To Operate.the Contractor Must Perform All Repairs/upgrades At The Facility Identified Within This Sow. repairs Performed By The Contractor Or Subcontractor Shall Be Performed In Accordance With The Specified Drawings And Repair Manual(s). 3.4 Changes To Such Manuals Used For Repairs Under This Contract, Or Changes To Drawings Or Specifications Used In The Manufacture Of Parts Utilized In These Repairs, Require Procuring Contracting Officer (pco) Approval In Accordance With The Configuration management Provisions Of This Statement Of Work Or Contract. Under No Circumstances Should The Repair, Test, And Inspection Extend Beyond The Requirements Of This Paragraph Unless Authorized By The Government Qar.in Addition, Requests For Approval Of Changes to A Repair Source Or Repair Facility Shall Be Submitted In Writing To The Pco Prior To Making Any Such Change. 3.4.1 Any Repairs Performed Using Unapproved Changes To Such Manuals, Drawings, Specifications, Or Changes To Repair Source Or Facility Are Done At The Contractor's Own Risk. If The Government Disapproves The Requested Change, The Contractor Shall Replace Any delivered Items Repaired Using Such Unapproved Manuals,drawing, Specification, Repair Source Or Repair Facility Change. The Contractor Is Not Entitled To Any Equitable Adjustment To The Contract Price Or Terms Based On The Government's Disapproval Of A requested Change To Manuals, Drawings, Specifications, Or To A Repair Source Or Facility. 3.4.2 References On Drawings And Specifications:for Repair And Overhaul Purposes Only. All References To The "prime Contractor" Or The "actual Manufacturer" Appearing On The Drawings And / Or Specifications Or Technical Data Furnished By The Government Shall Be read As The "government Designated Agency" 3.4.3 Process Control Documentation: The Contractor Shall Prepare And Maintain Repair Procedures, And Test / Inspection Information / Procedures Which Shall Be Made Available To The Government For Review And Approval. The Procedures Shall Include Sequential diagrams Of Processes, As Well As The Performance Specifications To Perform The Testing / Inspection Procedures. Those Processes Shall Be Frozen After Approval Of The Inspection / Test. 3.4.4 Beyond Economical Repair (ber). An Item Is Ber If The Cost Of The Repair Exceeds 75% Of The Production Quantity Price To Replace The Item, Current At Time Of Award. This Replacement Price Is For The Purposes Of Ber Determinations Only, And May Not Be used Or Relied On By The Offeror In The Pricing Of The Repairs Required By This Contract. Items Determined Ber Are Not Included In The Contract Price. The Contractor Shall Obtain Written Concurrence From Dcma For All Units Determined By The Contractor To Be ber. All Such Determinations, Including The Basis For The Determination, The Repair Required, The Proposed Price To Repair And The Dcma Written Concurrence Shall Be Provided By The Contractor To The Pco, With A Copy To The Inventory Manager. After Receipt Of the Required Documentation, The Pco Shall Provide The Contractor Disposition Instructions Or Contractual Authority For Repair Of The Item. The Contractor Is Not Authorized To Proceed With The Repair Until Notification To Proceed Is Received From The Pco. Any disposal Ordered Shall Be Performed By The Contractor In Accordance With All Applicable Regulations And In Accordance With All Dcma Disposal Procedures And Requirements. 3.4.5 Missing On Induction (moi). A Weapons Repairable Assembly (wra) Is Subject To This Moi Provision If The Item Received By The Contractor For Repair Is Missing One Or More Shop Replaceable Assemblies (sras). Contractor Replacement Of Moi Sras Is Not included In The Contract Price. The Contractor Shall Immediately Notify Dcma When An Item Is Received With Moi Sra(s) And Shall Obtain Written Verification From Dcma For All Wras Determined To Have Moi Sra(s). The Contractor Shall Provide All Such determinations, Including Identification Of The Missing Sra(s), And The Dcma Written Verification, To The Inventory Manager With A Copy To The Pco And Aco Prior To Induction And/or Repair Of The Wra. The Contractor Shall Not Induct And/or Repair Wras With Moi sras Until Instructions On How To Proceed Are Provided To The Contractor By The Inventory Manager (where No Adjustment Price To The Contract Is Required) Or By The Pco. Items Received By The Contractor Missing Consumable Parts Are Not Moi Items. Rather, repair Of Such Items And Replacement Of The Missing Consumable Parts Are Included In The Contract Price And The Item Shall Be Inducted And Repaired By The Contractor Under This Contract. 3.4.6 Replacing Failed Or Missing Shop Replaceable Assembly (sra) When Repairinga Weapons Replaceable Assembly (wra). 3.4.7 A. When The Contractor Believes One Or More Sra(s) Within A Wra Are Either: 3.4.8 Beyond Economic Repair (ber) Or Beyond Repair (br) I. E. The Unit Is Not Capable Of Being Repaired Because Of The Extent Of Physical Damage), Or Missing On Induction (moi), The Contractor Shall Obtain Written Verification From Dcma And Advice From The inventory Manager Whether A Sra May Be Replaced By One Or More Of The Following Options: Ship In Place From An Existing Spares Or Repair Contract, If Any, Milstrip The Sra(s), Otherwise Be Provided Direction For Obtaining The Sra(s) At No Cost To The contractor.the Detailed Procedures Are Set Forth In Section 6.0 Of The Web-based Commercial Asset Visibility (cav) Statement Of Work. 3.4.9 B.when Not Otherwise Provided For (or Precluded) By Other Terms Of This Contract, The Contractor May Seek Written Authorization To Replace Failed Sra(s) With Ready For Issue Sra(s). When Authorized, The Procedures Set Forth In Paragraph 3.0 Of Section 6.2 Of The Web-based Commercial Asset Visibility (cav) Statement Of Work Shall Be Followed. 3.4.10 Over And Above Repair (oar). An Item Sent To The Contractor Shall Be Considered To Require Over And Above (oar) Repair Effort If The Repair Required Is Not The Type Of Repair That Would Be Anticipated As A Result Of Normal Navy Operation Of The Item And is Not Included In The Contract Pricing Due To The Nature Or Scope Of The Repair Needed For That Particular Item. Therefore, Repair Of Oar Items May Be Subject To Equitable Adjustment. The Contractor Shall Obtain Written Concurrence From Dcma For All Units determined By The Contractor To Require Oar Effort. All Such Oar Determinations, Including The Basis For The Determination, The Repair Required, The Proposed Price To Repair And The Dcma Written Concurrence, Shall Be Provided By The Contractor To The Pco Prior to Undertaking Repair Of The Item. after Receipt Of The Required Documentation, The Pco Shall Provide The Contractor Disposition Instructions Or Contractual Authority For Repair Of The Item. Any Ordered Disposal Shall Be Performed By The Contractor In Accordance With All Applicable Regulations and Dcma Disposal Procedures And Requirements. 3.5 4.0 Parts And Materials 3.5.1 General. The Contractor Is Responsible For Supplying All Parts And Material Necessary To Perform The Required Repairs Under This Contract Unless Parts Or Material Are Specifically Identified As Government Furnished Material (gfm). All Parts And Material used In Performance Of This Contract Shall Be In Accordance With The Latest Approved Revision Of Applicable Drawings And Specifications And Shall Be New In Accordance With Far 52.211-5, Material Requirements, Which Is Incorporated By Reference Herein. authorization To Use Other Than New Material As Defined By Far 52.211-5 Requires Written Approval From The Pco. In Addition, Cannibalization Must Be Approved By The Pco. Cannibalization Of Units That Have Not Been Inducted Is Not Typically Authorized And requires Specific Approval By The Pco. 3.5.2 The Contractor Shall Ensure It Has Access For The Duration Of This Contract To Updated Drawings And Specifications For Parts And Material Required For Repairs Performed Under This Contract. Any Change To Such Parts/material Drawings Or Specifications requires Government Approval In Accordance With The Configuration Management Provisions Of This Statement Of Work. Written Approval From The Pco Must Be Obtained Prior To Any Change To The Manufacturing Source Or Manufacturing Facility For All Parts Which require Source Approval, Unless The Contractor Is The Design Control Agent (dca) (i.e. The Entity Responsible For Maintaining The Latest Configuration Data) For The The Contract Item. If The Contractor Is The Dca, The Contractor May Approve Approve Changes To manufacturing Source Or Manufacturing Facility For All Parts, Including Those Which Require Source Approval. Any Repairs Performed Using Unapproved Changes To Such Drawings, Specifications Or Manufacturing Source Or Facility Are Done At The Contractor's Own risk. If The Government Disapproves The Requested Change, The Contractor Shall Replace Any Delivered Items Repaired Using Such Unapproved Change. The Contractor Is Not Entitled To Any Equitable Adjustment To The Contract Price Or Terms Based On The government's Disapproval Of A Requested Change To The Drawings, Specifications Or Manufacturing Source Or Facility. 3.5.3 Purchased Material Control And Parts Control. The Contractor Shall Establish And Maintain A System Of Control Over Purchased Parts And Material. Such Controls Shall, At A Minimum, Assure That The Parts And And Material Purchased Are In Compliance With The requirements Of This Contract. 3.5.4 Receiving Inspection Of Purchased Parts And Material. (1)purchased Items Shall Be Inspected Upon Receipt At The Contractor's Facility To Assure Conformance With All Requirements Of The Applicable Drawings And Specifications Or (2)the Contractor Shall provide Prior To The Contract Award Evidence For Government Review And Approval Of A Purchased Parts And Material System Which Provides For The Inspections To Assure Conformance With All Requirements Of The Applicable Drawings And Specifications. Evidence Of such Inspections Of Such Inspections Shall Be Maintained By The Contractor Or Subcontractor For Government Review.the Inspection Report Shall, At A Minimum, Include A Record Of All Dimensional Data (coordinate/positional), Material, Finish, And Process With appropriate Pass/fail Criteria Such As Certifications and Actual Dimensonal Readings. 3.5.5 ^^^note^^^part Cannibalization Is Not Authorized Unless Specifically Approved By Navsup Wss And The Bde. 3.5.6 3.6 Source And Location Of Repair Source: 3.6.1 The Contractor Shall Specify The Name Of The Source/division Performing The Work And The Actual Location Where Work Will Be Performed. windshield Panel,ai ;sierracin Corporation; Company Name , ;12780 San Fernando Rd, Sylmar, Ca 91342-3728; Address , ;12035; Cage Code inspection Will Be Accomplished On The Contractor's Equipment 3.7 5.0 Contractor Quality Requirements: 3.7.1 Quality Program. The Contractor Shall Establish, Implement, Document And Maintain A Quality System That Ensures Conformance To All Applicable Requirements Of Iso 9001/ Sae As9100. The Contractor's Quality Management System/program Shall Be Designed To promptly Detect, Correct And Prevent Conditions That Adversely Affect Quality. 3.7.2 Calibration System Requirements. Contractor Shall Maintain A Calibration System That Meets The Requirements Of Ansi/ncsl Z540.3, Iso-10012-1 Or An Equivalent Calibration Program Acceptable To The Government. 3.8 6.0 Configuration Management (cm): 3.8.1 The Contractor Shall Maintain A Configuration Management Plan In Accordance With The Provisions Of Navsup Wss Configuration Management Clause Navicpia18. (refer To Contract). 3.9 7.0 Markings. 3.9.1 Marking Shall Be As Indicated In The Contract When Applicable. 3.10 8.0 Storage; 3.10.1 The Contractor Shall Provide A Proper Enclosed Warehouse Environment For Both Material Items Awaiting Repair And Assets Which Have Been Repaired And Are Awaiting Shipment To Ensure The Items Are Not Damaged While Being Stored. 4. Quality Assurance Provisions - Not Applicable. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable

Details: This Is A Combined Synopsis/solicitation For Commercial Items And Services Prepared In Accordance With (iaw) The Format In Subpart 12.6 “streamlined Procedures For Evaluation And Solicitation For Commercial Items”, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. the Purpose Of This Requirement Is To Provide The Fleet Readiness Center South West (frcsw) Preventative Maintenance And Service On Eighteen (18) Machines Manufactured By Dmg Mori, Mori Seiki, And Fastems. The Work To Be Performed Under The Contract Will Include Preventative Maintenance, Emergent Service And Scheduled Service Repairs, And Over And Above Work. set Aside: None. This Will Be A Full And Open Competition. Naics Code For This Announcement Is 811310. solicitation Closing Date: All Proposals Must Be Received By The Closing Date/time On December 9, 2024 At 4:00 Pm Est. Preferred Delivery Method For Submission Of Your Proposal Is Via Dod Safe. A Dod Safe Link Will Be Provided By Contacting Amanda Taylor, At Email: Amanda.j.taylor80.civ@us.navy.mil. Requests Shall Be Made Within 7 Calendar Days Of The Closing Of The Solicitation. Proposals Shall Include At A Minimum, The Following: unit Pricing Per Line Item As Shown On The Separately Attached Schedule Of Items Table; vendor Contact Name, Phone Number And Email Address company Cage Code And Duns Number/unique Entity Id Number business Size: Small/large/other: _______________ to Obtain Or Renew A Duns Number And/or Cage Code, Please Visit Https://beta.sam.gov/. all Companies Must Be Registered In The System For Award Management At Https://beta.sam.gov/ To Be Considered For Award. The Government Will Not Provide Contract Financing For This Acquisition. Invoice Instructions Shall Be Provided At Time Of Award note: A Price Matrix Table Has Been Provided As A Separate Attachment To Assist With Supplying The Required Pricing And Vendor Contact Information. contract Type: Under Far Part 13.5 The Government Intends To Award A Single Firm Fixed Price (ffp) Contract. description Of Requirement: the Commander, Fleet Readiness Center (comfrc) Procurement Group (pg), In Support Of The Fleet Readiness Center Southwest (frcsw) – North Island, Intends To Procure Preventative Maintenance And Emergent Repair Services For 18 Cnc Machines Manufactured By The Following: Dmg Mori, Dmg Mori/burener Maschinenfabrik, Mori Seiki, And Fastems. The Requirement Will Include Providing Preventative Maintenance, Emergent And/or Scheduled Maintenance, And Over And Above Work. please See Attached Statement Of Work And Cdrls For Full Requirements warranties: A Warranty Shall Be Provided For A Minimum Of Twelve (12) Months (e.g. 365 Days) That Follows “start-up, System(s) Testing, And Acceptance/recognition Of Project Completion,” By The Government And Final Payment Acceptance By The Contractor. Please See Attached Statement Of Work For Additional Warranty Requirements. place Of Performance, Inspection, And Acceptance: Deliver Fob Destination, Services Shall Start No Later Than Fifteen (15) Days From Date Of Contract Award. address For Delivery And Place Of Performance: Frcsw Nas North Island Bldgs 347 And 472, San Diego, Ca 92135 list Any Acceptance Criteria: All Or None Basis. conformance To Sow: You Must Provide The Supplies And Services In Accordance With The Statement Of Work. Unless An Exception Is Specifically Noted Within Your Proposal, Your Proposal Will Be Considered To Be In Complete Conformance To The Solicited Requirements. submissions: The Provision At 52.212-1, Instructions To Offerors-commercial, Applies To This Acquisition, And Is Amended As Follows: the Offeror Agrees To Hold The Prices In Its Offer Firm For 120 Calendar Days From The Date Specified For Receipt Of Offers. the Response Will Consist Of The Following: part I – The Proposal Consists Of A Cover Page That Is Signed And Includes The Authorizing Point-of-contact. In Doing So, The Offeror Agrees To The Contract Terms And Conditions As Written In The Solicitation, With Attachments. The Cover Letter May State Any Delineating Exceptions Taken To The Solicitation Terms And Conditions With Accompanying Rationale. However, Offerors Are Cautioned That Any Noncompliance With The Terms And Conditions Of The Solicitation May Cause Their Quote To Be Determined Not Eligible For Award. Offerors Shall Ensure That All Clauses And Provisions That Require "fill In" Information Are Appropriately Completed (attachment 4). part Ii - Price - Submit One (1) Electronic Copy Of The Completed Price Matrix (attachment 3) (electronic Copies Must Be Compatible With Microsoft Excel). basis For Selection: Pursuant To Far 12.603, Contract Award Will Be Made Using Simplified Acquisition Procedures In Accordance With Far 13.5. Offeror’s Submissions Will Be Evaluated Based Upon The Following: technical: Offeror Shall Clearly Demonstrate Its Technical Approach To Meet The Requirements Of Clin/line Items Based On The Requirements Of The Request For Proposal, Quantity, Quality And Timeliness Of Delivery. price: The Offeror Shall Complete Clin Pricing Matrix, Attachment 4, Of This Solicitation. In Addition To The Completed Clin Pricing On Page One (1), The Offeror Shall Provide Sufficient Price Information To Allow The Contracting Officer To Determine The Completeness And Reasonableness Of The Offerors Prices. far 52.212-2, Evaluation - Commercial Items, Applies To This Acquisition And Is Amended As Follows: the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Will Be Used To Evaluate Offers: factor: (1) Technical (2) Price technical Is Less Significant Than Price. options. The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Unless A Written Notice Of Withdrawal Is Received Before Award. this Is A Competitive Lowest Price, Technically Acceptable Acquisition Following Simplified Acquisition Procedures Iaw Far Subpart 13.5 In Which Competing Offerors Price Will Be Evaluated On A Basis Significantly More Important Than Technical. By Submission Of Its Offer In Accordance With The Instructions Provided In Clause Far 52.212-1, Instructions To Offerors, The Offeror Accedes To The Terms Of This Model Contract And All Such Offers Shall Be Treated Equally Except For Their Prices And Technical Records. Offerors Must Clearly Identify Any Exception To The Solicitation Terms And Conditions And Provide Complete Accompanying Rationale. The Evaluation Process Shall Proceed As Follows: price Evaluation. All Offerors Will Be Ranked According To Price In Order Of Lowest To Highest Based On Their Total Evaluation Price, Including Option Prices. An Offeror’s Total Price Will Be Determined By Adding Together The 12-month Price For The Line Items For Preventive Maintenance For The Base Year And Each Option Period. the 6-month Extension Of Services Is Iaw Far 52.217-8, "option To Extend Services" And Will Only Be Utilized If Necessary. The 6-month Extension Of Services Is Not Considered Part Of Option Period 4 And Will Be A Separate Option Exercise If It Is Utilized. However, Proposed Pricing For The 6-month Extension Will Be Based On Option Period 4 Pricing. technical Evaluation. Beginning With The Lowest Priced Offer, The Contracting Officer Will Seek Recent And Relevant Technical Information On All Offers Based On The References Provided By The Offeror, If The Lowest Priced Evaluated Offer Is Judged Technically Acceptable, Then That Offer Represents The Best Value For The Government And The Evaluation Process Stops At This Point. Award Shall Be Made To That Offeror Without Further Consideration Of Any Other Offers. If The Lowest Priced Offeror Is Not Judged Technically Acceptable, The Next Lowest Priced Offeror Will Be Evaluated, And The Process Will Continue (in Order By Price) Until An Offeror Is Judged Technically Acceptable Or Until All Offerors Are Evaluated. offerors Shall Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Products And Commercial Services, With Its Offer (attachment 3). discussions: The Government Intends To Award A Purchase Order Without Discussions With Respective Vendors. The Government However, Reserves The Right To Conduct Discussions/interchanges If Deemed In Its Best Interest. Communication Conducted To Resolve Minor Or Clerical Errors Will Not Constitute Interchanges And The Contracting Officer Reserves The Right To Award A Contract Without The Opportunity For Revision. The Government Reserves The Right To Hold Interchanges Using Interchange Notices (ins) If, During The Evaluation, It Is Determined To Be In The Best Interest Of The Government. Offeror Responses To Ins Will Be Considered In Making The Award Decision. The Government May Conduct Interchanges With One, Some, None, Or All Vendors At Its Discretion. cost Of Proposals: Expenses Incurred In The Preparation Of Proposals In Response To This Rfp Are The Vendor’s Sole Responsibility And Not Reimbursable By The Government. invoicing And Payment: Invoices Shall Be Submitted As A 2-in-1 Or Combo Invoice Via Wide Area Workflow (wawf) To A Wawf Acceptor That Will Be Identified In The Resulting Contract Per Dfars Clause 252.232-7006 Wide Area Work Flow. It Is The Contractor’s Responsibility To Register In The Wawf System In Order To Insure Prompt Payment. Once The Invoice Is Received In Wawf, The Acceptor Will Review And If Correct Accept It For Payment. applicable Provisions And Clauses: The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-07. The Government Intends To Include The Following Far And Dfar Clauses And Provisions, Either By Reference Or In Full Text In The Resulting Award. note: The Far And Dfars Clauses May Be Accessed In Full Text At Http://www.acquisition.gov/browse/index/far. provisions By Reference: 52.203-11 certification And Disclosure Regarding Payments To Influence Certain Federal Transactions sep 2007 52.204-7 system For Award Management oct 2018 52.204-16 commercial And Government Entity Code Reporting aug 2020 52.204-17 ownership And Control Of Offeror aug 2020 52.204-20 predecessor Of Offeror aug 2020 52.209-7 information Regarding Responsibility Matters oct 2018 52.209-11 representation By Corporations Regarding Delinquent Tax Liability Or A Felony Conviction Under Any Federal Law feb 2016 52.212-1 instructions To Offerors – Commercial Items dec 2021 52.212-3 offeror Representations And Certifications—commercial Items dec 2021 52.217-5 evaluation Of Options jul 1990 52.222-25 affirmative Action Compliance apr 1984 52.223-22 public Disclosure Of Greenhouse Gas Emissions And Reduction Goals – Representation dec 2016 52.225-25 prohibition On Contracting With Entities Engaging In Certain Activities Or Transactions Relating To Iran – Representation jun 2020 252.203-7005 representation Relating To Compensation Of Former Dod Officials nov 2011 252.204-7008 compliance Safeguarding Covered Defense Information Controls oct 2016 252.204-7016 covered Defense Telecommunications Equipment Or Services- Representations dec 2019 252.204-7017 prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services- Representation may 2021 252.204-7019 notice Of Nist So 800-171 Dod Assessment Requirements nov 2020 252.204-7024 notice On The Use Of The Supplier Performance Risk System mar 2023 252.225-7974 representation Regarding Persons That Have Business Operations With The Maduro Regime (deviation 2020-o0005) feb 2020 clauses By Reference: 52.203-6 restrictions On Subcontractor Sales To The Government jun 2020 52.203-12 limitation On Payments To Influence Certain Federal Transactions jun 2020 52.204-9 personal Identity Verification Of Contractor Personnel jan 2011 52.204-13 system For Award Management Maintenance oct 2018 52.204-18 commercial And Government Entity Code Maintenance aug 2020 52.204-19 incorporation By Reference Of Representation And Certifications dec 2014 52.204-21 basic Safeguarding Of Covered Contractor Information Systems nov 2021 52.209-2 prohibition On Contracting With Inverted Domestic Corporations nov 2015 52.209-6 protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarrment nov 2021 52.211-6 brand Name Or Equal aug 1999 52.212-1 instructions To Offerors-commercial Products And Commercial Services nov 2021 52.212-3 Alt I offeror Representations And Certifications- Commercial Products And Services Alternative I nov 2021 52.212-4 contract Terms And Conditions – Commercial Items dec 2021 52.226-8 encouraging Contractor Policies To Ban Txt Messaging While Driving may 2024 52.232-1 payments apr 1984 52.232-39 unenforceability Of Unauthorized Obligations jun 2013 52.232-40 providing Accelerated Payments To Small Business Subcontractors dec 2021 52.233-3 protest After Award aug 1996 52.233-4 applicable Law For Breach Of Contract Claim oct 2004 52.244-6 subcontracts For Commercial Items jan 2022 52.245-1 government Property jan 2017 52.245-9 use And Charges apr 2012 52.246-4 inspection Of Services – Fixed Price aug 1996 52.247-34 f.o.b. Destination nov 1991 52.249-2 termination For Convenience Of The Government (fixed Price) apr 2012 52.252-2 clauses Incorporated By Reference feb 1998 52.253-1 computer Generated Forms jan 1991 252.201-7000 contracting Officer’s Representative dec 1991 252.203-7000 requirements Relating To Compensation Of Former Dod Officials sep 2011 252.203-7002 requirement To Inform Employees Of Whistleblower Rights sep 2013 252.204-7002 payment For Contract Line Or Subline Items Not Separately Priced apr 2020 252.204-7003 control Of Government Personnel Work Product apr 1992 252.204-7004 dod Antiterrorism Awareness Training For Contractors feb 2019 252.204-7012 safeguarding Of Unclassified Controlled Technical Information dec 2019 252.204-7015 notice Of Authorized Disclosure Of Information To Litigation Support Contractors may 2016 252.204-7018 prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services jan 2021 252.204-7020 nist Sp 800-171 Dod Assessment Requirements nov 2020 252.211-7003 item Unique Identification And Valuation mar 2016 252.211-7007 reporting Of Government Furnished Property aug 2012 252.223-7008 prohibition Of Hexavalent Chromium jun 2013 252.225-7001 buy American And Balance Of Payments Program dec 2017 252.225-7048 export-controlled Items jun 2013 252.227-7015 technical Data—commercial Items feb 2014 252.227-7037 validation Of Restrictive Markings On Technical Data sep 2016 252.232-7003 electronic Submission Of Payment Requests And Receiving Reports dec 2018 252.232-7006 wide Area Workflow Payment Instructions dec 2018 252.232-7010 levies On Contract Payments dec 2006 252.232-7017 accelerating Payments To Small Business Subcontractors—prohibition On Fees And Consideration apr 2020 252.244-7000 subcontracts For Commercial Items jan 2021 252.246-7008 sources Of Electronic Parts may 2018 252.247-7023 transportation Of Supplies By Sea – Basic feb 2019 incorporated By Full Text: The Following Provisions And Clauses In Full Text Have Been Separately Attached: 52.204-24 representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment dec 2021 52.204-25 prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment dec 2021 52.204-26 covered Telecommunications Equipment Or Services – Representation oct 2020 52.212-5 contract Terms And Conditions Required To Implement Statues Or Executive Orders – Commercial Items jan 2022 52.217-8 option To Extend Services nov 1999 52.217-9 option To Extend The Term Of The Contract mar 2000 52.252-1 solicitation Provisions Incorporated By Reference feb 1998 52.252-2 clauses Incorporated By Reference feb 1998 52.252-5 authorized Deviations In Provisions nov 2020 52.252-6 authorized Deviation In Clauses nov 2020 questions And Inquiries Concerning This Rfp: All Questions And Inquiries Concerning Any Aspect Of This Requirement Must Be Submitted In Writing To Amanda Taylor And Tiffany Crayle, Amanda.j.taylor80.civ@us.navy.mil; Tiffany.l.crayle.civ@us.navy.mil. Telephone Requests Will Not Be Honored. Deadline For Submittal Of Questions Is December 2, 2024 At 4:00 Pm Est. The Government’s Response To Inquiries Will Be Made In Writing. Any Resulting Additions, Deletions Or Changes To The Rfp Will Be Updated On This Sam.gov Posting. please Note: A Proposal Does Not Constitute An Award; Therefore, An Obligation To Your Company Is Not Official Until You Receive An Awarded Contract. attachments: attachment 1: Statement Of Work attachment 2: Contract Data Requirement List (cdrls) attachment 3: Price Matrix attachment 4: Clauses And Provisions Incorporated By Full Text

Details: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. Solicitation No. 75h71325q00002 Has Been Issued As A Request For Quotation For A Firm Fixed Price Commercial Services Contract For Nutritionist Nonpersonal Healthcare Services. See The Attached Performance Work Statement For A Description Of The Services To Be Provided. The Performance Period Is One Year, To Start Within 30 Days Of The Date Of Award. The Performance Period Includes A One-year Base Period, And Four (4) One-year Option Periods. The Place Of Performance Is Western Oregon Service Unit (chemawa Indian Health Center), 3750 Chemawa Road Ne, Salem, Oregon 97305. the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-07 Dated 08/29/2024. The Provision At 52.212-1, Instructions To Offerors – Commercial, Applies To This Acquisition. The Provision At 52.212-2, Evaluation – Commercial Items, Applies To This Acquisition. The Following Factors Shall Be Used To Evaluate Offers: Price And Past Performance. Offerors Are Advised To Submit A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications – Commercial Items, With Its Offer. The Clause At 52.212-4, Contract Terms And Conditions – Commercial Items, Applies To This Acquisition. the Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Items, Applies To This Acquisition And These Clauses: far 52.252-2 Clauses Incorporated By Reference (feb 1998) this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This Address: Http://www.acquisition.gov. 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) 52.204-9 Personal Identity Verification Of Contractor Personnel (jan 2011) 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards (jun 2020) 52.204-13, System For Award Management Maintenance (oct 2018) 52.204-18, Commercial And Government Entity Code Maintenance (aug 2020) 52.204-19 Incorporation By Reference Of Representations And Certifications (dec 2014) 52.204-27, Prohibition On A Byte Dance Covered Application (jun 2023) 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or proposed For Debarment (nov 2021) 52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters (oct 2018) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015) 52.219-6, Notice Of Total Small Business Set-aside (nov 2020) 52.219-28, Post-award Small Business Program Rerepresentation (feb 2024) 52.222-3, Convict Labor (june 2003) 52.222-21, Prohibition Of Segregated Facilities (apr 2015) 52.222-26, Equal Opportunity (sept 2016) 52.222-35, Equal Opportunity For Veterans (jun 2020) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) 52.222-37, Employment Reports On Veterans (jun 2020) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) 52.222-41, Service Contract Labor Standards (aug 2018) 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) employee Class: Dietician 0630 monetary Wage-fringe Benefits: gs-11 $38.17 - Retirement, Paid Sick Leave, Health & Welfare, Vacation, Holidays 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year And Option Contracts) (aug 2018) 52.222-50, Combating Trafficking In Persons (nov 2021) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) 52.232-33, Payment By Electronic Funds Transfer-system For Award Management (oct 2013) 52.233-3, Protest After Award (aug 1996) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) 52.239-1, Privacy Or Security Safeguards (aug 1996) far 52.204-9 Personal Identity Verification Of Contractor Personnel (jan 2011) (a)the Contractor Shall Comply With Agency Personal Identity Verification Procedures Identified In The Contract That Implement Homeland Security Presidential Directive-12 (hspd-12), Office Of Management And Budget (omb) Guidance M-05-24 And Federal Information Processing Standards Publication (fips Pub) Number 201. (b)the Contractor Shall Account For All Forms Of Government-provided Identification Issued To The Contractor Employees In Connection With Performance Under This Contract. The Contractor Shall Return Such Identification To The Issuing Agency At The Earliest Of Any Of The Following, Unless Otherwise Determined By The Government: (1)when No Longer Needed For Contract Performance. (2)upon Completion Of The Contractor Employee's Employment. (3)upon Contract Completion Or Termination. (c)the Contracting Officer May Delay Final Payment Under A Contract If The Contractor Fails To Comply With These Requirements. (d)the Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (d), In All Subcontracts When The Subcontractor's Employees Are Required To Have Routine Physical Access To A Federally-controlled Facility And/or Routine Access To A Federally-controlled Information System. It Shall Be The Responsibility Of The Prime Contractor To Return Such Identification To The Issuing Agency In Accordance With The Terms Set Forth In Paragraph (b) Of This Section, Unless Otherwise Approved In Writing By The Contracting Officer. 52.217-9 Option To Extend The Term Of The Contract (mar 2000) (a) The Government May Extend The Term Of This Contract By Written Notice To The Contractor Within 30 Days; Provided That The Government Gives The Contractor A Preliminary Written Notice Of Its Intent To Extend At Least 60 Days Before The Contract Expires. The Preliminary Notice Does Not Commit The Government To An Extension. (b) If The Government Exercises This Option, The Extended Contract Shall Be Considered To Include This Option Clause. (c) The Total Duration Of This Contract, Including The Exercise Of Any Options Under This Clause, Shall Not Exceed Five (5) Years. department Of Health And Human Services Acquisition Regulation (hhsar) (48 Cfr Chapter 3) Clauses: 352.239-73, Electronic And Information Technology Accessibility Notice (dec 2015), 352.239-74, Electronic And Information Technology Accessibility (dec 2015), 352.237-70, Pro-children Act. (dec 2015) (a)public Law 103-227, Title X, Part C, Also Known As The Pro-children Act Of 1994 (act), 20 U.s.c. 7183, Imposes Restrictions On Smoking In Facilities Where Certain Federally Funded Children's Services Are Provided. The Act Prohibits Smoking Within Any Indoor Facility (or Portion Thereof), Whether Owned, Leased, Or Contracted For, That Is Used For The Routine Or Regular Provision Of: (i) Kindergarten, Elementary, Or Secondary Education Or Library Services Or (ii) Health Or Day Care Services That Are Provided To Children Under The Age Of 18. The Statutory Prohibition Also Applies To Indoor Facilities That Are Constructed, Operated, Or Maintained With Federal Funds. (b) By Acceptance Of This Contract Or Order, The Contractor Agrees To Comply With The Requirements Of The Act. The Act Also Applies To All Subcontracts Awarded Under This Contract For The Specified Children's Services. Accordingly, The Contractor Shall Ensure That Each Of Its Employees, And Any Subcontractor Staff, Is Made Aware Of, Understands, And Complies With The Provisions Of The Act. Failure To Comply With The Act May Result In The Imposition Of A Civil Monetary Penalty In An Amount Not To Exceed $1,000 For Each Violation And/or The Imposition Of An Administrative Compliance Order On The Responsible Entity. Each Day A Violation Continues Constitutes A Separate Violation. 352.237-71 Crime Control Act Of 1990-reporting Of Child Abuse (dec 2015) (a)public Law 101-647, Also Known As The Crime Control Act Of 1990 (act), Imposes Responsibilities On Certain Individuals Who, While Engaged In A Professional Capacity Or Activity, As Defined In The Act, On Federal Land Or In A Federally-operated (or Contracted) Facility, Learn Of Facts That Give The Individual Reason To Suspect That A Child Has Suffered An Incident Of Child Abuse. (b) The Act Designates "covered Professionals" As Those Persons Engaged In Professions And Activities In Eight Different Categories Including, But Not Limited To, Teachers, Social Workers, Physicians, Dentists, Medical Residents Or Interns, Hospital Personnel And Administrators, Nurses, Health Care Practitioners, Chiropractors, Osteopaths, Pharmacists, Optometrists, Podiatrists, Emergency Medical Technicians, Ambulance Drivers, Alcohol Or Drug Treatment Personnel, Psychologists, Psychiatrists, Mental Health Professionals, Child Care Workers And Administrators, And Commercial Film And Photo Processors. The Act Defines The Term "child Abuse' As The Physical Or Mental Injury, Sexual Abuse Or Exploitation, Or Negligent Treatment Of A Child. (c) Accordingly, Any Person Engaged In A Covered Profession Or Activity Under An Hhs Contract Or Subcontract, Regardless Of The Purpose Of The Contract Or Subcontract, Shall Immediately Report A Suspected Child Abuse Incident In Accordance With The Provisions Of The Act. If A Child Is Suspected Of Being Harmed, The Appropriate State Child Abuse Hotline, Local Child Protective Services (cps), Or Law Enforcement Agency Shall Be Contacted. For More Information About Where And How To File A Report, The Childhelp Usa, National Child Abuse Hotline (1-800-4-a-child) Shall Be Called. Any Covered Professional Failing To Make A Timely Report Of Such Incident Shall Be Guilty Of A Class B Misdemeanor. (d) By Acceptance Of This Contract Or Order, The Contractor Agrees To Comply With The Requirements Of The Act. The Act Also Applies To All Applicable Subcontracts Awarded Under This Contract. Accordingly, The Contractor Shall Ensure That Each Of Its Employees, And Any Subcontractor Staff, Is Made Aware Of, Understands, And Complies With The Provisions Of The Act. 352.237-72 Crime Control Act Of 1990-requirement For Background Checks (dec 2015) (a) Public Law 101-647, Also Known As The Crime Control Act Of 1990 (act), Requires That All Individuals Involved With The Provision Of Child Care Services To Children Under The Age Of 18 Undergo A Criminal Background Check. "child Care Services" Include, But Are Not Limited To, Social Services, Health And Mental Health Care, Child (day) Care, Education (whether Or Not Directly Involved In Teaching), And Rehabilitative Programs. Any Conviction For A Sex Crime, An Offense Involving A Child Victim, Or A Drug Felony, May Be Grounds For Denying Employment Or For Dismissal Of An Employee Providing Any Of The Services Listed Above. (b) The Contracting Officer Will Provide The Necessary Information To The Contractor Regarding The Process For Obtaining The Background Check. The Contractor May Hire A Staff Person Provisionally Prior To The Completion Of A Background Check, If At All Times Prior To The Receipt Of The Background Check During Which Children Are In The Care Of The Newly-hired Person, The Person Is Within The Sight And Under The Supervision Of A Previously Investigated Staff Person. (c) By Acceptance Of This Contract Or Order, The Contractor Agrees To Comply With The Requirements Of The Act. The Act Also Applies To All Applicable Subcontracts Awarded Under This Contract. Accordingly, The Contractor Shall Ensure That Each Of Its Employees, And Any Subcontractor Staff, Is Made Aware Of, Understands, And Complies With The Provisions Of The Act. 352.237-75 Key Personnel (dec 2015) The Key Personnel Specified In This Contract Are Considered To Be Essential To Work Performance. At Least 30 Days Prior To The Contractor Voluntarily Diverting Any Of The Specified Individuals To Other Programs Or Contracts The Contractor Shall Notify The Contracting Officer And Shall Submit A Justification For The Diversion Or Replacement And A Request To Replace The Individual. The Request Must Identify The Proposed Replacement And Provide An Explanation Of How The Replacement's Skills, Experience, And Credentials Meet Or Exceed The Requirements Of The Contract (including, When Applicable, Human Subjects Testing Requirements). If The Employee Of The Contractor Is Terminated For Cause Or Separates From The Contractor Voluntarily With Less Than Thirty Days’ Notice, The Contractor Shall Provide The Maximum Notice Practicable Under The Circumstances. The Contractor Shall Not Divert, Replace, Or Announce Any Such Change To Key Personnel Without The Written Consent Of The Contracting Officer. The Contract Will Be Modified To Add Or Delete Key Personnel As Necessary To Reflect The Agreement Of The Parties. Health Insurance Portability And Accountability Act (hipaa) The Indian Health Service (ihs) Is Required To Comply With Hipaa In The Provision Of Health Care To Ihs Patients. Hipaa Was Implemented By The U.s. Department Of Health And Human Services, Office Of Civil Rights, Under The Code Of Federal Regulations, Part 160 And 164. Accordingly, All Health Care Providers, Including Contracted Health Care Providers Are Required To Comply With Hipaa Requirements (full Text Will Be Furnished Upon Request). far 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) this Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completed By The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Those Provisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriate Information With Its Quotation Or Offer. Also, The Full Text Of Asolicitation Provision May Be Accessed Electronically At This Address: Http://www.acquisition.gov. 52.204-7, System For Award Management (oct 2018) 52.204-16, Commercial And Government Entity Code Reporting (aug 2020) 52.204-24, Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) health Insurance Portability And Accountability Act (hipaa) The Indian Health Service (ihs) Is Required To Comply With Hipaa In The Provision Of Health Care To Ihs Patients. Hipaa Was Implemented By The U.s. Department Of Health And Human Services, Office Of Civil Rights, Under The Code Of Federal Regulations, Part 160 And 164. Accordingly, All Health Care Providers, Including Contracted Health Care Providers Are Required To Comply With Hipaa Requirements (full Text Will Be Furnished Upon Request). this Requirement Is Set-aside For Indian Small Business Economic Enterprise (isbee). The Naics Code Is 621399 And The Small Business Size Standard Is $10.0 Million. attachments attachment 1 – Schedule Of Items attachment 2 – Performance Work Statement attachment 3 – Business Associate Agreement attachment 4 – Wage Determination attachment 5 – Ihs Iee Representation Form quotation Instructions: the Government Intends To Award A Contract To The Responsible Quoter Whose Quote Represents The Best Value To The Government. The Basis For Award Will Be Best Value To The Government, Considering All Evaluation Factors. The Government Will Make An Award To The Responsible Quoter, Whose Quote Is Most Advantageous To The Government, Price And Other Factors Considered. Accordingly, Since It May Be In The Best Interest Of The Government To Consider Award To Other Than The Lowest Priced Quoter Or Other Than The Highest Technically Rated Quoter, The Government Will Use A Best Value Approach. Evaluations Will Be Based Solely On The Materials Included In The Quote. Therefore, The Respondent's Initial Quote Should Contain The Best Terms. Quoters Must Include A Completed Copy Of Attachment 5 – Ihs Iee Representation Form With Each Quote. After Receipt Of Quotes, The Government Will Conduct An Evaluation. However, During The Evaluation Process, The Government May, Solely At Its Discretion, Communicate With A Quoter For Clarification Purposes. At Any Time Prior To Award, Including Upon Receipt Of Quotes, The Government May Exclude A Quote From Further Consideration For Any Material Failure To Follow Instructions. evaluation Factor 1: Price. respondent Shall Remit A Copy Of Attachment 1. Price Quotation Shall Include All Necessary Supervision, Management, Labor, Transportation, Equipment, Materials, Shipping, Any Other Incidental Costs, Overhead And Profit. evaluation Factor 2: Demonstrated Prior Experience the Government Will Assess Its Level Of Confidence That The Contractor Will Successfully Perform The Requirements based On The Quoter's Relevant Demonstrated Prior Experience Providing Nutritionist Services In A Clinical Setting. This Evaluation Of This Factor Is Based On The Demonstrated Prior Experience Presented By The Quoter, And How Closely It Aligns With The Scope Of Work Detailed In Attachment 2. quoters Are Requested To Provide/reference Up To Three (3) Recent Examples Of Demonstrated Prior Experience In Their Submission With Accurate And Up To Date Contact Information For The Respective Customers. Quoters Are Encouraged To Submit Experience Performed As A Prime, Through Teaming Agreements, Or As The Sole Sub-contractor On The Relevant Projects. Depending On The Circumstances, More Weight May Be Given To Experience Serving As The Prime Contractor. evaluation Factor 3: Past Performance the Government Will Assess Its Level Of Confidence That The Contractor Will Successfully Perform The Requirements Based On The Quoter's Past Performance. in Addition To Any Information Provided By The References Submitted By The Quoter Under Evaluation Factor 2, Past Performance Information Based On The Government’s Knowledge Of And Previous Experience With The Quoter, Or Another Reasonable Basis, May Be Considered When Evaluating The Quoter’s Past Performance. Quoters Without A Record Of Relevant Past Performance Will Be Assigned A Neutral Rating On This Evaluation Factor. evaluation Process all Quotes Shall Be Evaluated By The Government In Accordance With The Factors And Criteria Established Above. The Government Will Conduct A Comparative Evaluation To Select The Contractor That Is Best Suited And Provides Best Value, Considering The Evaluation Factors In This Solicitation. The Government Reserves The Right Not To Make An Award As A Result Of This Solicitation, If In The Opinion Of The Government, None Of The Submissions Would Provide Satisfactory Performance At A Cost That Is Considered Fair And Reasonable And/or Economically Feasible. a Written Notice Of Award Or Acceptance Of A Quote, Mailed Or Otherwise Furnished To The Successful Quoter Within The Time For Acceptance Specified In The Quote, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Quote’s Specified Expiration Time, The Government May Accept A Quote, Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. award Will Be Made To The Responsible Respondent Pursuant To Far Subpart 9.1. Quotes Are Due By January 23, 2024 At 5:00 Pm Pst By Email To Jacob.blalock@ihs.gov And Poraoacquisition@ihs.gov. E-mail Subject Line Shall Include The Solicitation Number “75h71325q00002/vendor Name”. For Information Regarding This Solicitation, Contact Jacob Blalock By Email At Jacob.blalock@ihs.gov And Copy Poraoacquisition@ihs.gov. Questions By Telephone Will Not Be Considered.

Details: Item Unique Identification And Valuation (jan 2023)|19|n723.15|b5p|215-697-2782|meghan.e.gubicza.civ@us.navy.mil|||||||||||||||| higher-level Contract Quality Requirement|8|x|||||||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo) Type||cognizant Dfas|n00383|cognizant Dcma|cognizant Dcma|see Schedule |source||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| safeguarding Sensitive Conventional Arms, Ammunition, And Explosives (nov 2023)|9|||||||||| equal Opportuity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| limitations On Pass-through Charges (jun 2020)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| type Of Contract (apr 1984)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| this Requirement Is For The Repair Of The Items Herein This Solicitation. repair Turnaround Time (rtat) Definition: The Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractor?s Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In The Subsequent Contract. Required Rtat: 129.822 Days After Receipt Of Asset. throughput Constraint: Contractor Must Provide A Throughput Constraint For Each Nsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences X/month (contractor Fill In #). A Throughput Of 0000 Per Month Reflects No Throughput Constraint. induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. reconciliation: A Reconciliation Modification Will Be Issued After Final Inspection And Acceptance Of All Assets Inducted Under The Subsequent Contract. The Parties Have Agreed To A Price (shown On The Schedule Page) For Each Unit At The Negotiated Rtat. Such prices Are Based On The Contractor Meeting The Rtat Requirements Described Within The Schedule Page. If The Contractor Does Not Meet The Applicable Rtat Requirement, Consideration Will Be Assessed And Subject To Negotiation. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. \ 1. Scope 1.1 . Markings Shall Be In Accordance With Mil-std-130. 1.2 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;bae Systems; Drawing Number ( ;80249; ) ;1072288p-7; , Revision ;latest; And All Details And Specifications Referenced Therein. 1.3 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not Be provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced Specification. 1.4 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents - Not Applicable 3. Requirements 3.1 1.0 General 3.1.1 This Statement Of Work (sow) Establishes The Criteria For Repair And Testing /inspection Of The Subject Item. It Includes Inspection, Component Repair And Replacement,reassembly And Testing Procedures Required To Return Units Back Into A Servicable condition. 3.2 2.0 Definitions. 3.2.1 Contractor: Is Defined As The Successful Offeror Awarded A Contract, Orderor Issued A Project Work Order. The Term "contract" Encompasses A Contract, An Order, Or A Project Work Order. 3.2.2 Overhaul: An Overhauled Part Is One Which Has Been Disassembled, Cleaned, Inspected, Repaired As Necessary (by Replacing Or Repairing All Components Which Have Been Found To Exceed Limits Established By The Repair/overhaul Manual) Reassembled And Tested in Accordance With The Approved Repair/overhaul Manual Listed In This Sow And Returned To A Ready For Issue (rfi) Condition (refer To Contract Schedule For Items To Be Overhauled). 3.2.3 Repair: A Repaired Part Is One Which Has Been Restored To A Ready For Issue(rfi) Condition (by Replacing Or Repairing Those Components Found To Be Defective, Broken, Damaged Or Inoperative During The Initial Evaluation And Troubleshooting Phase) And tested In Accordance With The Approved Repair/overhaul Manual Listed In This Sow (refer To Contract Schedule For Items To Be Repaired). 3.3 3.0 Scope 3.3.1 General. The Items To Be Furnished Hereunder Shall Be Overhauled, Upgraded,repaired, Tested, Inspected, And Accepted In Accordance With The Terms And Conditions Specified In This Contract. Unless Expressly Provided Government Furnished Property, including Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Special Test Equipment, Or Any Other Manufacturing Aid Required For The Repair, Manufacture, And/or Testing Of The Subject Item(s) Will Not Be Provided By The Government And shall Be The Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing, Manual, Or Specification For The Contract Items. 3.3.2 Repair Upgrade Requirements:the Contractor Shall Provide The Necessary facility, Labor, Materials, Parts, And Test And Tooling Equipment Required To To Return The Following Items To A Ready For Issue (rfi) Condition: display Unit ;1072288p-7; P/n, ;7rh 7025 017016736 P8; Nsn, ;available Repair Manuals, Drawings And Specifications Per P/n Requirements; Tech Publications 3.3.3 Rfi Is Defined As That Condition Allowing The Items To Perform Properly And Reliably In An Operational Environment In A Manner They Were Intended To Operate.the Contractor Must Perform All Repairs/upgrades At The Facility Identified Within This Sow. repairs Performed By The Contractor Or Subcontractor Shall Be Performed In Accordance With The Specified Drawings And Repair Manual(s). 3.4 Changes To Such Manuals Used For Repairs Under This Contract, Or Changes To Drawings Or Specifications Used In The Manufacture Of Parts Utilized In These Repairs, Require Procuring Contracting Officer (pco) Approval In Accordance With The Configuration management Provisions Of This Statement Of Work Or Contract. Under No Circumstances Should The Repair, Test, And Inspection Extend Beyond The Requirements Of This Paragraph Unless Authorized By The Government Qar.in Addition, Requests For Approval Of Changes to A Repair Source Or Repair Facility Shall Be Submitted In Writing To The Pco Prior To Making Any Such Change. 3.4.1 Any Repairs Performed Using Unapproved Changes To Such Manuals, Drawings, Specifications, Or Changes To Repair Source Or Facility Are Done At The Contractor's Own Risk. If The Government Disapproves The Requested Change, The Contractor Shall Replace Any delivered Items Repaired Using Such Unapproved Manuals,drawing, Specification, Repair Source Or Repair Facility Change. The Contractor Is Not Entitled To Any Equitable Adjustment To The Contract Price Or Terms Based On The Government's Disapproval Of A requested Change To Manuals, Drawings, Specifications, Or To A Repair Source Or Facility. 3.4.2 References On Drawings And Specifications:for Repair And Overhaul Purposes Only. All References To The "prime Contractor" Or The "actual Manufacturer" Appearing On The Drawings And / Or Specifications Or Technical Data Furnished By The Government Shall Be read As The "government Designated Agency" 3.4.3 Process Control Documentation: The Contractor Shall Prepare And Maintain Repair Procedures, And Test / Inspection Information / Procedures Which Shall Be Made Available To The Government For Review And Approval. The Procedures Shall Include Sequential diagrams Of Processes, As Well As The Performance Specifications To Perform The Testing / Inspection Procedures. Those Processes Shall Be Frozen After Approval Of The Inspection / Test. 3.4.4 Beyond Economical Repair (ber). An Item Is Ber If The Cost Of The Repair Exceeds 75% Of The Production Quantity Price To Replace The Item, Current At Time Of Award. This Replacement Price Is For The Purposes Of Ber Determinations Only, And May Not Be used Or Relied On By The Offeror In The Pricing Of The Repairs Required By This Contract. Items Determined Ber Are Not Included In The Contract Price. The Contractor Shall Obtain Written Concurrence From Dcma For All Units Determined By The Contractor To Be ber. All Such Determinations, Including The Basis For The Determination, The Repair Required, The Proposed Price To Repair And The Dcma Written Concurrence Shall Be Provided By The Contractor To The Pco, With A Copy To The Inventory Manager. After Receipt Of the Required Documentation, The Pco Shall Provide The Contractor Disposition Instructions Or Contractual Authority For Repair Of The Item. The Contractor Is Not Authorized To Proceed With The Repair Until Notification To Proceed Is Received From The Pco. Any disposal Ordered Shall Be Performed By The Contractor In Accordance With All Applicable Regulations And In Accordance With All Dcma Disposal Procedures And Requirements. 3.4.5 Missing On Induction (moi). A Weapons Repairable Assembly (wra) Is Subject To This Moi Provision If The Item Received By The Contractor For Repair Is Missing One Or More Shop Replaceable Assemblies (sras). Contractor Replacement Of Moi Sras Is Not included In The Contract Price. The Contractor Shall Immediately Notify Dcma When An Item Is Received With Moi Sra(s) And Shall Obtain Written Verification From Dcma For All Wras Determined To Have Moi Sra(s). The Contractor Shall Provide All Such determinations, Including Identification Of The Missing Sra(s), And The Dcma Written Verification, To The Inventory Manager With A Copy To The Pco And Aco Prior To Induction And/or Repair Of The Wra. The Contractor Shall Not Induct And/or Repair Wras With Moi sras Until Instructions On How To Proceed Are Provided To The Contractor By The Inventory Manager (where No Adjustment Price To The Contract Is Required) Or By The Pco. Items Received By The Contractor Missing Consumable Parts Are Not Moi Items. Rather, repair Of Such Items And Replacement Of The Missing Consumable Parts Are Included In The Contract Price And The Item Shall Be Inducted And Repaired By The Contractor Under This Contract. 3.4.6 Replacing Failed Or Missing Shop Replaceable Assembly (sra) When Repairinga Weapons Replaceable Assembly (wra). 3.4.7 A. When The Contractor Believes One Or More Sra(s) Within A Wra Are Either: 3.4.8 Beyond Economic Repair (ber) Or Beyond Repair (br) I. E. The Unit Is Not Capable Of Being Repaired Because Of The Extent Of Physical Damage), Or Missing On Induction (moi), The Contractor Shall Obtain Written Verification From Dcma And Advice From The inventory Manager Whether A Sra May Be Replaced By One Or More Of The Following Options: Ship In Place From An Existing Spares Or Repair Contract, If Any, Milstrip The Sra(s), Otherwise Be Provided Direction For Obtaining The Sra(s) At No Cost To The contractor.the Detailed Procedures Are Set Forth In Section 6.0 Of The Web-based Commercial Asset Visibility (cav) Statement Of Work. 3.4.9 B.when Not Otherwise Provided For (or Precluded) By Other Terms Of This Contract, The Contractor May Seek Written Authorization To Replace Failed Sra(s) With Ready For Issue Sra(s). When Authorized, The Procedures Set Forth In Paragraph 3.0 Of Section 6.2 Of The Web-based Commercial Asset Visibility (cav) Statement Of Work Shall Be Followed. 3.4.10 Over And Above Repair (oar). An Item Sent To The Contractor Shall Be Considered To Require Over And Above (oar) Repair Effort If The Repair Required Is Not The Type Of Repair That Would Be Anticipated As A Result Of Normal Navy Operation Of The Item And is Not Included In The Contract Pricing Due To The Nature Or Scope Of The Repair Needed For That Particular Item. Therefore, Repair Of Oar Items May Be Subject To Equitable Adjustment. The Contractor Shall Obtain Written Concurrence From Dcma For All Units determined By The Contractor To Require Oar Effort. All Such Oar Determinations, Including The Basis For The Determination, The Repair Required, The Proposed Price To Repair And The Dcma Written Concurrence, Shall Be Provided By The Contractor To The Pco Prior to Undertaking Repair Of The Item. after Receipt Of The Required Documentation, The Pco Shall Provide The Contractor Disposition Instructions Or Contractual Authority For Repair Of The Item. Any Ordered Disposal Shall Be Performed By The Contractor In Accordance With All Applicable Regulations and Dcma Disposal Procedures And Requirements. 3.5 4.0 Parts And Materials 3.5.1 General. The Contractor Is Responsible For Supplying All Parts And Material Necessary To Perform The Required Repairs Under This Contract Unless Parts Or Material Are Specifically Identified As Government Furnished Material (gfm). All Parts And Material used In Performance Of This Contract Shall Be In Accordance With The Latest Approved Revision Of Applicable Drawings And Specifications And Shall Be New In Accordance With Far 52.211-5, Material Requirements, Which Is Incorporated By Reference Herein. authorization To Use Other Than New Material As Defined By Far 52.211-5 Requires Written Approval From The Pco. In Addition, Cannibalization Must Be Approved By The Pco. Cannibalization Of Units That Have Not Been Inducted Is Not Typically Authorized And requires Specific Approval By The Pco. 3.5.2 The Contractor Shall Ensure It Has Access For The Duration Of This Contract To Updated Drawings And Specifications For Parts And Material Required For Repairs Performed Under This Contract. Any Change To Such Parts/material Drawings Or Specifications requires Government Approval In Accordance With The Configuration Management Provisions Of This Statement Of Work. Written Approval From The Pco Must Be Obtained Prior To Any Change To The Manufacturing Source Or Manufacturing Facility For All Parts Which require Source Approval, Unless The Contractor Is The Design Control Agent (dca) (i.e. The Entity Responsible For Maintaining The Latest Configuration Data) For The The Contract Item. If The Contractor Is The Dca, The Contractor May Approve Approve Changes To manufacturing Source Or Manufacturing Facility For All Parts, Including Those Which Require Source Approval. Any Repairs Performed Using Unapproved Changes To Such Drawings, Specifications Or Manufacturing Source Or Facility Are Done At The Contractor's Own risk. If The Government Disapproves The Requested Change, The Contractor Shall Replace Any Delivered Items Repaired Using Such Unapproved Change. The Contractor Is Not Entitled To Any Equitable Adjustment To The Contract Price Or Terms Based On The government's Disapproval Of A Requested Change To The Drawings, Specifications Or Manufacturing Source Or Facility. 3.5.3 Purchased Material Control And Parts Control. The Contractor Shall Establish And Maintain A System Of Control Over Purchased Parts And Material. Such Controls Shall, At A Minimum, Assure That The Parts And And Material Purchased Are In Compliance With The requirements Of This Contract. 3.5.4 Receiving Inspection Of Purchased Parts And Material. (1)purchased Items Shall Be Inspected Upon Receipt At The Contractor's Facility To Assure Conformance With All Requirements Of The Applicable Drawings And Specifications Or (2)the Contractor Shall provide Prior To The Contract Award Evidence For Government Review And Approval Of A Purchased Parts And Material System Which Provides For The Inspections To Assure Conformance With All Requirements Of The Applicable Drawings And Specifications. Evidence Of such Inspections Of Such Inspections Shall Be Maintained By The Contractor Or Subcontractor For Government Review.the Inspection Report Shall, At A Minimum, Include A Record Of All Dimensional Data (coordinate/positional), Material, Finish, And Process With appropriate Pass/fail Criteria Such As Certifications and Actual Dimensonal Readings. 3.5.5 ^^^note^^^part Cannibalization Is Not Authorized Unless Specifically Approved By Navsup Wss And The Bde. 3.5.6 3.6 Source And Location Of Repair Source: 3.6.1 The Contractor Shall Specify The Name Of The Source/division Performing The Work And The Actual Location Where Work Will Be Performed. display Unit ;bae Systems; Company Name , ;450 Pulaski Road Greenlawn, Ny 11740-1606; Address , ;80249; Cage Code inspection Will Be Accomplished On The Contractor's Equipment 3.7 5.0 Contractor Quality Requirements: 3.7.1 Quality Program. The Contractor Shall Establish, Implement, Document And Maintain A Quality System That Ensures Conformance To All Applicable Requirements Of Iso 9001/ Sae As9100. The Contractor's Quality Management System/program Shall Be Designed To promptly Detect, Correct And Prevent Conditions That Adversely Affect Quality. 3.7.2 Calibration System Requirements. Contractor Shall Maintain A Calibration System That Meets The Requirements Of Ansi/ncsl Z540.3, Iso-10012-1 Or An Equivalent Calibration Program Acceptable To The Government. 3.8 6.0 Configuration Management (cm): 3.8.1 The Contractor Shall Maintain A Configuration Management Plan In Accordance With The Provisions Of Navsup Wss Configuration Management Clause Navicpia18. (refer To Contract). 3.9 7.0 Markings. 3.9.1 Marking Shall Be As Indicated In The Contract When Applicable. 3.10 8.0 Storage; 3.10.1 The Contractor Shall Provide A Proper Enclosed Warehouse Environment For Both Material Items Awaiting Repair And Assets Which Have Been Repaired And Are Awaiting Shipment To Ensure The Items Are Not Damaged While Being Stored. 4. Quality Assurance Provisions - Not Applicable. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable

Details: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. Solicitation No. 75h71325q00011 Has Been Issued As A Request For Quotation For A Firm Fixed Price Commercial Services Contract For Behavioral Health Nonpersonal Services. See The Attached Performance Work Statement For A Description Of The Services To Be Provided. The Performance Period Is One Year, To Start Within 30 Days Of The Date Of Award. The Performance Period Includes A One-year Base Period, And Four (4) One-year Option Periods. The Place Of Performance Is Western Oregon Service Unit (chemawa Indian Health Center), 3750 Chemawa Road Ne, Salem, Oregon 97305. the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-07 Dated 08/29/2024. The Provision At 52.212-1, Instructions To Offerors – Commercial, Applies To This Acquisition. The Provision At 52.212-2, Evaluation – Commercial Items, Applies To This Acquisition. The Following Factors Shall Be Used To Evaluate Offers: Price And Past Performance. Offerors Are Advised To Submit A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications – Commercial Items, With Its Offer. The Clause At 52.212-4, Contract Terms And Conditions – Commercial Items, Applies To This Acquisition. the Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Items, Applies To This Acquisition And These Clauses: far 52.252-2 Clauses Incorporated By Reference (feb 1998) this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This Address: Http://www.acquisition.gov. 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) 52.204-9 Personal Identity Verification Of Contractor Personnel (jan 2011) 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards (jun 2020) 52.204-13, System For Award Management Maintenance (oct 2018) 52.204-18, Commercial And Government Entity Code Maintenance (aug 2020) 52.204-19 Incorporation By Reference Of Representations And Certifications (dec 2014) 52.204-27, Prohibition On A Byte Dance Covered Application (jun 2023) 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or proposed For Debarment (nov 2021) 52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters (oct 2018) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015) 52.219-6, Notice Of Total Small Business Set-aside (nov 2020) 52.219-28, Post-award Small Business Program Rerepresentation (feb 2024) 52.222-3, Convict Labor (june 2003) 52.222-21, Prohibition Of Segregated Facilities (apr 2015) 52.222-26, Equal Opportunity (sept 2016) 52.222-35, Equal Opportunity For Veterans (jun 2020) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) 52.222-37, Employment Reports On Veterans (jun 2020) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) 52.222-41, Service Contract Labor Standards (aug 2018) 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) employee Class:social Worker 0185 monetary Wage-fringe Benefits" gs-11 $38.17 - Retirement, Paid Sick Leave, Health & Welfare, Vacation, Holidays 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year And Option Contracts) (aug 2018) 52.222-50, Combating Trafficking In Persons (nov 2021) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) 52.232-33, Payment By Electronic Funds Transfer-system For Award Management (oct 2013) 52.233-3, Protest After Award (aug 1996) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) 52.239-1, Privacy Or Security Safeguards (aug 1996) far 52.204-9 Personal Identity Verification Of Contractor Personnel (jan 2011) (a)the Contractor Shall Comply With Agency Personal Identity Verification Procedures Identified In The Contract That Implement Homeland Security Presidential Directive-12 (hspd-12), Office Of Management And Budget (omb) Guidance M-05-24 And Federal Information Processing Standards Publication (fips Pub) Number 201. (b)the Contractor Shall Account For All Forms Of Government-provided Identification Issued To The Contractor Employees In Connection With Performance Under This Contract. The Contractor Shall Return Such Identification To The Issuing Agency At The Earliest Of Any Of The Following, Unless Otherwise Determined By The Government: (1)when No Longer Needed For Contract Performance. (2)upon Completion Of The Contractor Employee's Employment. (3)upon Contract Completion Or Termination. (c)the Contracting Officer May Delay Final Payment Under A Contract If The Contractor Fails To Comply With These Requirements. (d)the Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (d), In All Subcontracts When The Subcontractor's Employees Are Required To Have Routine Physical Access To A Federally-controlled Facility And/or Routine Access To A Federally-controlled Information System. It Shall Be The Responsibility Of The Prime Contractor To Return Such Identification To The Issuing Agency In Accordance With The Terms Set Forth In Paragraph (b) Of This Section, Unless Otherwise Approved In Writing By The Contracting Officer. 52.217-9 Option To Extend The Term Of The Contract (mar 2000) (a) The Government May Extend The Term Of This Contract By Written Notice To The Contractor Within 30 Days; Provided That The Government Gives The Contractor A Preliminary Written Notice Of Its Intent To Extend At Least 60 Days Before The Contract Expires. The Preliminary Notice Does Not Commit The Government To An Extension. (b) If The Government Exercises This Option, The Extended Contract Shall Be Considered To Include This Option Clause. (c) The Total Duration Of This Contract, Including The Exercise Of Any Options Under This Clause, Shall Not Exceed Five (5) Years. department Of Health And Human Services Acquisition Regulation (hhsar) (48 Cfr Chapter 3) Clauses: 352.239-73, Electronic And Information Technology Accessibility Notice (dec 2015), 352.239-74, Electronic And Information Technology Accessibility (dec 2015), 352.237-70, Pro-children Act. (dec 2015) (a)public Law 103-227, Title X, Part C, Also Known As The Pro-children Act Of 1994 (act), 20 U.s.c. 7183, Imposes Restrictions On Smoking In Facilities Where Certain Federally Funded Children's Services Are Provided. The Act Prohibits Smoking Within Any Indoor Facility (or Portion Thereof), Whether Owned, Leased, Or Contracted For, That Is Used For The Routine Or Regular Provision Of: (i) Kindergarten, Elementary, Or Secondary Education Or Library Services Or (ii) Health Or Day Care Services That Are Provided To Children Under The Age Of 18. The Statutory Prohibition Also Applies To Indoor Facilities That Are Constructed, Operated, Or Maintained With Federal Funds. (b) By Acceptance Of This Contract Or Order, The Contractor Agrees To Comply With The Requirements Of The Act. The Act Also Applies To All Subcontracts Awarded Under This Contract For The Specified Children's Services. Accordingly, The Contractor Shall Ensure That Each Of Its Employees, And Any Subcontractor Staff, Is Made Aware Of, Understands, And Complies With The Provisions Of The Act. Failure To Comply With The Act May Result In The Imposition Of A Civil Monetary Penalty In An Amount Not To Exceed $1,000 For Each Violation And/or The Imposition Of An Administrative Compliance Order On The Responsible Entity. Each Day A Violation Continues Constitutes A Separate Violation. 352.237-71 Crime Control Act Of 1990-reporting Of Child Abuse (dec 2015) (a)public Law 101-647, Also Known As The Crime Control Act Of 1990 (act), Imposes Responsibilities On Certain Individuals Who, While Engaged In A Professional Capacity Or Activity, As Defined In The Act, On Federal Land Or In A Federally-operated (or Contracted) Facility, Learn Of Facts That Give The Individual Reason To Suspect That A Child Has Suffered An Incident Of Child Abuse. (b) The Act Designates "covered Professionals" As Those Persons Engaged In Professions And Activities In Eight Different Categories Including, But Not Limited To, Teachers, Social Workers, Physicians, Dentists, Medical Residents Or Interns, Hospital Personnel And Administrators, Nurses, Health Care Practitioners, Chiropractors, Osteopaths, Pharmacists, Optometrists, Podiatrists, Emergency Medical Technicians, Ambulance Drivers, Alcohol Or Drug Treatment Personnel, Psychologists, Psychiatrists, Mental Health Professionals, Child Care Workers And Administrators, And Commercial Film And Photo Processors. The Act Defines The Term "child Abuse' As The Physical Or Mental Injury, Sexual Abuse Or Exploitation, Or Negligent Treatment Of A Child. (c) Accordingly, Any Person Engaged In A Covered Profession Or Activity Under An Hhs Contract Or Subcontract, Regardless Of The Purpose Of The Contract Or Subcontract, Shall Immediately Report A Suspected Child Abuse Incident In Accordance With The Provisions Of The Act. If A Child Is Suspected Of Being Harmed, The Appropriate State Child Abuse Hotline, Local Child Protective Services (cps), Or Law Enforcement Agency Shall Be Contacted. For More Information About Where And How To File A Report, The Childhelp Usa, National Child Abuse Hotline (1-800-4-a-child) Shall Be Called. Any Covered Professional Failing To Make A Timely Report Of Such Incident Shall Be Guilty Of A Class B Misdemeanor. (d) By Acceptance Of This Contract Or Order, The Contractor Agrees To Comply With The Requirements Of The Act. The Act Also Applies To All Applicable Subcontracts Awarded Under This Contract. Accordingly, The Contractor Shall Ensure That Each Of Its Employees, And Any Subcontractor Staff, Is Made Aware Of, Understands, And Complies With The Provisions Of The Act. 352.237-72 Crime Control Act Of 1990-requirement For Background Checks (dec 2015) (a) Public Law 101-647, Also Known As The Crime Control Act Of 1990 (act), Requires That All Individuals Involved With The Provision Of Child Care Services To Children Under The Age Of 18 Undergo A Criminal Background Check. "child Care Services" Include, But Are Not Limited To, Social Services, Health And Mental Health Care, Child (day) Care, Education (whether Or Not Directly Involved In Teaching), And Rehabilitative Programs. Any Conviction For A Sex Crime, An Offense Involving A Child Victim, Or A Drug Felony, May Be Grounds For Denying Employment Or For Dismissal Of An Employee Providing Any Of The Services Listed Above. (b) The Contracting Officer Will Provide The Necessary Information To The Contractor Regarding The Process For Obtaining The Background Check. The Contractor May Hire A Staff Person Provisionally Prior To The Completion Of A Background Check, If At All Times Prior To The Receipt Of The Background Check During Which Children Are In The Care Of The Newly-hired Person, The Person Is Within The Sight And Under The Supervision Of A Previously Investigated Staff Person. (c) By Acceptance Of This Contract Or Order, The Contractor Agrees To Comply With The Requirements Of The Act. The Act Also Applies To All Applicable Subcontracts Awarded Under This Contract. Accordingly, The Contractor Shall Ensure That Each Of Its Employees, And Any Subcontractor Staff, Is Made Aware Of, Understands, And Complies With The Provisions Of The Act. 352.237-75 Key Personnel (dec 2015) The Key Personnel Specified In This Contract Are Considered To Be Essential To Work Performance. At Least 30 Days Prior To The Contractor Voluntarily Diverting Any Of The Specified Individuals To Other Programs Or Contracts The Contractor Shall Notify The Contracting Officer And Shall Submit A Justification For The Diversion Or Replacement And A Request To Replace The Individual. The Request Must Identify The Proposed Replacement And Provide An Explanation Of How The Replacement's Skills, Experience, And Credentials Meet Or Exceed The Requirements Of The Contract (including, When Applicable, Human Subjects Testing Requirements). If The Employee Of The Contractor Is Terminated For Cause Or Separates From The Contractor Voluntarily With Less Than Thirty Days’ Notice, The Contractor Shall Provide The Maximum Notice Practicable Under The Circumstances. The Contractor Shall Not Divert, Replace, Or Announce Any Such Change To Key Personnel Without The Written Consent Of The Contracting Officer. The Contract Will Be Modified To Add Or Delete Key Personnel As Necessary To Reflect The Agreement Of The Parties. Health Insurance Portability And Accountability Act (hipaa) The Indian Health Service (ihs) Is Required To Comply With Hipaa In The Provision Of Health Care To Ihs Patients. Hipaa Was Implemented By The U.s. Department Of Health And Human Services, Office Of Civil Rights, Under The Code Of Federal Regulations, Part 160 And 164. Accordingly, All Health Care Providers, Including Contracted Health Care Providers Are Required To Comply With Hipaa Requirements (full Text Will Be Furnished Upon Request). far 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) this Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completed By The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Those Provisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriate Information With Its Quotation Or Offer. Also, The Full Text Of A Solicitation Provision May Be Accessed Electronically At This Address: Http://www.acquisition.gov. 52.204-7, System For Award Management (oct 2018) 52.204-16, Commercial And Government Entity Code Reporting (aug 2020) 52.204-24, Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) health Insurance Portability And Accountability Act (hipaa) The Indian Health Service (ihs) Is Required To Comply With Hipaa In The Provision Of Health Care To Ihs Patients. Hipaa Was Implemented By The U.s. Department Of Health And Human Services, Office Of Civil Rights, Under The Code Of Federal Regulations, Part 160 And 164. Accordingly, All Health Care Providers, Including Contracted Health Care Providers Are Required To Comply With Hipaa Requirements (full Text Will Be Furnished Upon Request). this Requirement Is Set-aside For Indian Small Business Economic Enterprise (isbee). The Naics Code Is 621112 And The Small Business Size Standard Is $13.5 Million. attachments attachment 1 – Schedule Of Items attachment 2 – Performance Work Statement attachment 3 – Business Associate Agreement attachment 4 – Wage Determination attachment 5 – Ihs Iee Representation Form quotation Instructions: the Government Intends To Award A Contract To The Responsible Quoter Whose Quote Represents The Best Value To The Government. The Basis For Award Will Be Best Value To The Government, Considering All Evaluation Factors. The Government Will Make An Award To The Responsible Quoter, Whose Quote Is Most Advantageous To The Government, Price And Other Factors Considered. Accordingly, Since It May Be In The Best Interest Of The Government To Consider Award To Other Than The Lowest Priced Quoter Or Other Than The Highest Technically Rated Quoter, The Government Will Use A Best Value Approach. Evaluations Will Be Based Solely On The Materials Included In The Quote. Therefore, The Respondent's Initial Quote Should Contain The Best Terms. Quoters Must Include A Completed Copy Of Attachment 5 – Ihs Iee Representation Form With Each Quote. After Receipt Of Quotes, The Government Will Conduct An Evaluation. However, During The Evaluation Process, The Government May, Solely At Its Discretion, Communicate With A Quoter For Clarification Purposes. At Any Time Prior To Award, Including Upon Receipt Of Quotes, The Government May Exclude A Quote From Further Consideration For Any Material Failure To Follow Instructions. evaluation Factor 1: Price. respondent Shall Remit A Copy Of Attachment 1. Price Quotation Shall Include All Necessary Supervision, Management, Labor, Transportation, Equipment, Materials, Shipping, Any Other Incidental Costs, Overhead And Profit. evaluation Factor 2: Demonstrated Prior Experience the Government Will Assess Its Level Of Confidence That The Contractor Will Successfully Perform The Requirements Based On The Quoter's Relevant Demonstrated Prior Experience Providing Behavioral Health Services In A Clinical Setting. This Evaluation Of This Factor Is Based On The Demonstrated Prior Experience Presented By The Quoter, And How Closely It Aligns With The Scope Of Work Detailed In Attachment 2. quoters Are Requested To Provide/reference Up To Three (3) Recent Examples Of Demonstrated Prior Experience In Their Submission With Accurate And Up To Date Contact Information For The Respective Customers. Quoters Are Encouraged To Submit Experience Performed As A Prime, Through Teaming Agreements, Or As The Sole Sub-contractor On The Relevant Projects. Depending On The Circumstances, More Weight May Be Given To Experience Serving As The Prime Contractor. evaluation Factor 3: Past Performance the Government Will Assess Its Level Of Confidence That The Contractor Will Successfully Perform The Requirements Based On The Quoter's Past Performance. in Addition To Any Information Provided By The References Submitted By The Quoter Under Evaluation Factor 2, Past Performance Information Based On The Government’s Knowledge Of And Previous Experience With The Quoter, Or Another Reasonable Basis, May Be Considered When Evaluating The Quoter’s Past Performance. Quoters Without A Record Of Relevant Past Performance Will Be Assigned A Neutral Rating On This Evaluation Factor. evaluation Process all Quotes Shall Be Evaluated By The Government In Accordance With The Factors And Criteria Established Above. The Government Will Conduct A Comparative Evaluation To Select The Contractor That Is Best Suited And Provides Best Value, Considering The Evaluation Factors In This Solicitation. The Government Reserves The Right Not To Make An Award As A Result Of This Solicitation, If In The Opinion Of The Government, None Of The Submissions Would Provide Satisfactory Performance At A Cost That Is Considered Fair And Reasonable And/or Economically Feasible. a Written Notice Of Award Or Acceptance Of A Quote, Mailed Or Otherwise Furnished To The Successful Quoter Within The Time For Acceptance Specified In The Quote, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Quote’s Specified Expiration Time, The Government May Accept A Quote, Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. award Will Be Made To The Responsible Respondent Pursuant To Far Subpart 9.1. Quotes Are Due By January 23, 2024 At 5:00 Pm Pst By Email To Jacob.blalock@ihs.gov And Poraoacquisition@ihs.gov. E-mail Subject Line Shall Include The Solicitation Number “75h71325q00011/vendor Name”. For Information Regarding This Solicitation, Contact Jacob Blalock By Email At Jacob.blalock@ihs.gov And Copy Poraoacquisition@ihs.gov. Questions By Telephone Will Not Be Considered.

Details: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement|8|x|||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo) Type||dfas|n00383|dcma|dcma|see Schedule|source||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| warranty Of Supplies Of A Noncomplex Nature (jun 2003)|6|12 Months|60 Days Upon Notice Of Defect||||| safeguarding Sensitive Conventional Arms, Ammunition, And Explosives (nov 2023)|9|||||||||| equal Opportuity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| limitations On Pass-through Charges (jun 2020)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| type Of Contract (apr 1984)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| the Purpose Of This Amendment Is To Extend The Solicitation Period To 24 Jan 2025. this Requirement Is For The Repair Of The Items Herein Thissolicitation. repair Turnaround Time (rtat) Definition: The Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In The Subsequent Contract. required Rtat: ## ____ Days After Receipt Of Asset. Throughput Constraint: Contractor Must Provide A Throughput Constraint For Each Nsn(s). Total Assets To Be Repaired Monthly After Initial Delivery Commences X/month (contractor Fill In #). A Throughput Of ##____ Per Month Reflects No Throughput Constraint. Induction Expiration Date: 365 Days After Contract Award Date. Any Asset Received After This Date In Days Is Not Authorized For Repair Without Bi-lateral Agreement Between The Contractor And Navsup Wss Contracting Officer. reconciliation:a Reconciliation Modification Will Be Issued After Final Inspection And Acceptance Of All Assets Inducted Under The Subsequent Contract. The Parties Have Agreed To A Price (shown On The Schedule Page) For Each Unit At The Negotiated Rtat. Such prices Are Based On The Contractor Meeting The Rtat Requirements Described Within The Schedule Page. If The Contractor Does Not Meet The Applicable Rtat Requirement, Consideration Will Be Assessed And Subject To Negotiation. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications)related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. Early And Incremental Deliveries Accepted And Preferred. \ 1. Scope 1.1 Articles To Be Furnished Hereunder Shall Be Repaired, Tested Andinspected In Accordance With The Terms And Conditions Specified In Therequirements Section Of This Document. 1.2 Unless Expressly Provided For Elsewhere In This Clause, Equipment Suchas Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Orany Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not Be provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced Specification. 1.3 The Use Of Mil-w-81381 Wire In Any Item To Be Delivered Under This Procurement Is Prohibited. The Foregoing Prohibition Applies Notwithstanding Any Reference To Mil-w-81381 Wire That May Be Made In Any Of The Drawings Or Specifications For This procurement. Sae-as22759 Series Wire Shall Be Used In Lieu Of Mil-w-81381 Wire, In Any Place Where Mil-w-81381 Wire Is Cited In This Procurement. Any Questions Concerning This Requirement Should Be Directed To The Procuring Contracting Officer. 1.4 If Mil-std-454 Is Referenced In The Drawings Or In The Specification,the Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c Personnel Performing Tasks In Accordance With Ipc/eiaj-std-001c Shall Be Trained And Certified As Requried By ipc/eiaj-std-001c Paragraph 5.1.4. 2. Applicable Documents - Not Applicable 3. Requirements 3.1 1.0 General 3.1.1 This Statement Of Work (sow) Establishes The Criteria For Repair And Testing /inspection Of The Subject Item. It Includes Inspection, Component Repair And Replacement,reassembly And Testing Procedures Required To Return Units Back Into A Servicable condition. 3.2 2.0 Definitions. 3.2.1 Contractor: Is Defined As The Successful Offeror Awarded A Contract, Orderor Issued A Project Work Order. The Term "contract" Encompasses A Contract, An Order, Or A Project Work Order. 3.2.2 Overhaul: An Overhauled Part Is One Which Has Been Disassembled, Cleaned, Inspected, Repaired As Necessary (by Replacing Or Repairing All Components Which Have Been Found To Exceed Limits Established By The Repair/overhaul Manual) Reassembled And Tested in Accordance With The Approved Repair/overhaul Manual Listed In This Sow And Returned To A Ready For Issue (rfi) Condition (refer To Contract Schedule For Items To Be Overhauled). 3.2.3 Repair: A Repaired Part Is One Which Has Been Restored To A Ready For Issue(rfi) Condition (by Replacing Or Repairing Those Components Found To Be Defective, Broken, Damaged Or Inoperative During The Initial Evaluation And Troubleshooting Phase) And tested In Accordance With The Approved Repair/overhaul Manual Listed In This Sow (refer To Contract Schedule For Items To Be Repaired). 3.3 3.0 Scope 3.3.1 General. The Items To Be Furnished Hereunder Shall Be Overhauled, Upgraded,repaired, Tested, Inspected, And Accepted In Accordance With The Terms And Conditions Specified In This Contract. Unless Expressly Provided Government Furnished Property, including Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Special Test Equipment, Or Any Other Manufacturing Aid Required For The Repair, Manufacture, And/or Testing Of The Subject Item(s) Will Not Be Provided By The Government And shall Be The Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing, Manual, Or Specification For The Contract Items. 3.3.2 Repair Upgrade Requirements:the Contractor Shall Provide The Necessary facility, Labor, Materials, Parts, And Test And Tooling Equipment Required To To Return The Following Items To A Ready For Issue (rfi) Condition: indicator,horizont, ;133000-29; P/n, ;6605015591172; Nsn, ;oem Tech Drawings; Tech Publications 3.3.3 Rfi Is Defined As That Condition Allowing The Items To Perform Properly And Reliably In An Operational Environment In A Manner They Were Intended To Operate.the Contractor Must Perform All Repairs/upgrades At The Facility Identified Within This Sow. repairs Performed By The Contractor Or Subcontractor Shall Be Performed In Accordance With The Specified Drawings And Repair Manual(s). 3.4 Changes To Such Manuals Used For Repairs Under This Contract, Or Changes To Drawings Or Specifications Used In The Manufacture Of Parts Utilized In These Repairs, Require Procuring Contracting Officer (pco) Approval In Accordance With The Configuration management Provisions Of This Statement Of Work Or Contract. Under No Circumstances Should The Repair, Test, And Inspection Extend Beyond The Requirements Of This Paragraph Unless Authorized By The Government Qar.in Addition, Requests For Approval Of Changes to A Repair Source Or Repair Facility Shall Be Submitted In Writing To The Pco Prior To Making Any Such Change. 3.4.1 Any Repairs Performed Using Unapproved Changes To Such Manuals, Drawings, Specifications, Or Changes To Repair Source Or Facility Are Done At The Contractor's Own Risk. If The Government Disapproves The Requested Change, The Contractor Shall Replace Any delivered Items Repaired Using Such Unapproved Manuals,drawing, Specification, Repair Source Or Repair Facility Change. The Contractor Is Not Entitled To Any Equitable Adjustment To The Contract Price Or Terms Based On The Government's Disapproval Of A requested Change To Manuals, Drawings, Specifications, Or To A Repair Source Or Facility. 3.4.2 References On Drawings And Specifications:for Repair And Overhaul Purposes Only. All References To The "prime Contractor" Or The "actual Manufacturer" Appearing On The Drawings And / Or Specifications Or Technical Data Furnished By The Government Shall Be read As The "government Designated Agency" 3.4.3 Process Control Documentation: The Contractor Shall Prepare And Maintain Repair Procedures, And Test / Inspection Information / Procedures Which Shall Be Made Available To The Government For Review And Approval. The Procedures Shall Include Sequential diagrams Of Processes, As Well As The Performance Specifications To Perform The Testing / Inspection Procedures. Those Processes Shall Be Frozen After Approval Of The Inspection / Test. 3.4.4 Beyond Economical Repair (ber). An Item Is Ber If The Cost Of The Repair Exceeds 75% Of The Production Quantity Price To Replace The Item, Current At Time Of Award. This Replacement Price Is For The Purposes Of Ber Determinations Only, And May Not Be used Or Relied On By The Offeror In The Pricing Of The Repairs Required By This Contract. Items Determined Ber Are Not Included In The Contract Price. The Contractor Shall Obtain Written Concurrence From Dcma For All Units Determined By The Contractor To Be ber. All Such Determinations, Including The Basis For The Determination, The Repair Required, The Proposed Price To Repair And The Dcma Written Concurrence Shall Be Provided By The Contractor To The Pco, With A Copy To The Inventory Manager. After Receipt Of the Required Documentation, The Pco Shall Provide The Contractor Disposition Instructions Or Contractual Authority For Repair Of The Item. The Contractor Is Not Authorized To Proceed With The Repair Until Notification To Proceed Is Received From The Pco. Any disposal Ordered Shall Be Performed By The Contractor In Accordance With All Applicable Regulations And In Accordance With All Dcma Disposal Procedures And Requirements. 3.4.5 Missing On Induction (moi). A Weapons Repairable Assembly (wra) Is Subject To This Moi Provision If The Item Received By The Contractor For Repair Is Missing One Or More Shop Replaceable Assemblies (sras). Contractor Replacement Of Moi Sras Is Not included In The Contract Price. The Contractor Shall Immediately Notify Dcma When An Item Is Received With Moi Sra(s) And Shall Obtain Written Verification From Dcma For All Wras Determined To Have Moi Sra(s). The Contractor Shall Provide All Such determinations, Including Identification Of The Missing Sra(s), And The Dcma Written Verification, To The Inventory Manager With A Copy To The Pco And Aco Prior To Induction And/or Repair Of The Wra. The Contractor Shall Not Induct And/or Repair Wras With Moi sras Until Instructions On How To Proceed Are Provided To The Contractor By The Inventory Manager (where No Adjustment Price To The Contract Is Required) Or By The Pco. Items Received By The Contractor Missing Consumable Parts Are Not Moi Items. Rather, repair Of Such Items And Replacement Of The Missing Consumable Parts Are Included In The Contract Price And The Item Shall Be Inducted And Repaired By The Contractor Under This Contract. 3.4.6 Replacing Failed Or Missing Shop Replaceable Assembly (sra) When Repairinga Weapons Replaceable Assembly (wra). 3.4.7 A. When The Contractor Believes One Or More Sra(s) Within A Wra Are Either: 3.4.8 Beyond Economic Repair (ber) Or Beyond Repair (br) I. E. The Unit Is Not Capable Of Being Repaired Because Of The Extent Of Physical Damage), Or Missing On Induction (moi), The Contractor Shall Obtain Written Verification From Dcma And Advice From The inventory Manager Whether A Sra May Be Replaced By One Or More Of The Following Options: Ship In Place From An Existing Spares Or Repair Contract, If Any, Milstrip The Sra(s), Otherwise Be Provided Direction For Obtaining The Sra(s) At No Cost To The contractor.the Detailed Procedures Are Set Forth In Section 6.0 Of The Web-based Commercial Asset Visibility (cav) Statement Of Work. 3.4.9 B.when Not Otherwise Provided For (or Precluded) By Other Terms Of This Contract, The Contractor May Seek Written Authorization To Replace Failed Sra(s) With Ready For Issue Sra(s). When Authorized, The Procedures Set Forth In Paragraph 3.0 Of Section 6.2 Of The Web-based Commercial Asset Visibility (cav) Statement Of Work Shall Be Followed. 3.4.10 Over And Above Repair (oar). An Item Sent To The Contractor Shall Be Considered To Require Over And Above (oar) Repair Effort If The Repair Required Is Not The Type Of Repair That Would Be Anticipated As A Result Of Normal Navy Operation Of The Item And is Not Included In The Contract Pricing Due To The Nature Or Scope Of The Repair Needed For That Particular Item. Therefore, Repair Of Oar Items May Be Subject To Equitable Adjustment. The Contractor Shall Obtain Written Concurrence From Dcma For All Units determined By The Contractor To Require Oar Effort. All Such Oar Determinations, Including The Basis For The Determination, The Repair Required, The Proposed Price To Repair And The Dcma Written Concurrence, Shall Be Provided By The Contractor To The Pco Prior to Undertaking Repair Of The Item. after Receipt Of The Required Documentation, The Pco Shall Provide The Contractor Disposition Instructions Or Contractual Authority For Repair Of The Item. Any Ordered Disposal Shall Be Performed By The Contractor In Accordance With All Applicable Regulations and Dcma Disposal Procedures And Requirements. 3.5 4.0 Parts And Materials 3.5.1 General. The Contractor Is Responsible For Supplying All Parts And Material Necessary To Perform The Required Repairs Under This Contract Unless Parts Or Material Are Specifically Identified As Government Furnished Material (gfm). All Parts And Material used In Performance Of This Contract Shall Be In Accordance With The Latest Approved Revision Of Applicable Drawings And Specifications And Shall Be New In Accordance With Far 52.211-5, Material Requirements, Which Is Incorporated By Reference Herein. authorization To Use Other Than New Material As Defined By Far 52.211-5 Requires Written Approval From The Pco. In Addition, Cannibalization Must Be Approved By The Pco. Cannibalization Of Units That Have Not Been Inducted Is Not Typically Authorized And requires Specific Approval By The Pco. 3.5.2 The Contractor Shall Ensure It Has Access For The Duration Of This Contract To Updated Drawings And Specifications For Parts And Material Required For Repairs Performed Under This Contract. Any Change To Such Parts/material Drawings Or Specifications requires Government Approval In Accordance With The Configuration Management Provisions Of This Statement Of Work. Written Approval From The Pco Must Be Obtained Prior To Any Change To The Manufacturing Source Or Manufacturing Facility For All Parts Which require Source Approval, Unless The Contractor Is The Design Control Agent (dca) (i.e. The Entity Responsible For Maintaining The Latest Configuration Data) For The The Contract Item. If The Contractor Is The Dca, The Contractor May Approve Approve Changes To manufacturing Source Or Manufacturing Facility For All Parts, Including Those Which Require Source Approval. Any Repairs Performed Using Unapproved Changes To Such Drawings, Specifications Or Manufacturing Source Or Facility Are Done At The Contractor's Own risk. If The Government Disapproves The Requested Change, The Contractor Shall Replace Any Delivered Items Repaired Using Such Unapproved Change. The Contractor Is Not Entitled To Any Equitable Adjustment To The Contract Price Or Terms Based On The government's Disapproval Of A Requested Change To The Drawings, Specifications Or Manufacturing Source Or Facility. 3.5.3 Purchased Material Control And Parts Control. The Contractor Shall Establish And Maintain A System Of Control Over Purchased Parts And Material. Such Controls Shall, At A Minimum, Assure That The Parts And And Material Purchased Are In Compliance With The requirements Of This Contract. 3.5.4 Receiving Inspection Of Purchased Parts And Material. (1)purchased Items Shall Be Inspected Upon Receipt At The Contractor's Facility To Assure Conformance With All Requirements Of The Applicable Drawings And Specifications Or (2)the Contractor Shall provide Prior To The Contract Award Evidence For Government Review And Approval Of A Purchased Parts And Material System Which Provides For The Inspections To Assure Conformance With All Requirements Of The Applicable Drawings And Specifications. Evidence Of such Inspections Of Such Inspections Shall Be Maintained By The Contractor Or Subcontractor For Government Review.the Inspection Report Shall, At A Minimum, Include A Record Of All Dimensional Data (coordinate/positional), Material, Finish, And Process With appropriate Pass/fail Criteria Such As Certifications and Actual Dimensonal Readings. 3.5.5 ^^^note^^^part Cannibalization Is Not Authorized Unless Specifically Approved By Navsup Wss And The Bde. 3.5.6 3.6 Source And Location Of Repair Source: 3.6.1 The Contractor Shall Specify The Name Of The Source/division Performing The Work And The Actual Location Where Work Will Be Performed. indicator,horizont, ;canadian Commercial Corp; Company Name , ;350 Rue Albert Street Suite 700, Ottawa K1a Os6 Canada; Address , ;98247; Cage Code inspection Will Be Accomplished On The Contractor's Equipment 3.7 5.0 Contractor Quality Requirements: 3.7.1 Quality Program. The Contractor Shall Establish, Implement, Document And Maintain A Quality System That Ensures Conformance To All Applicable Requirements Of Iso 9001/ Sae As9100. The Contractor's Quality Management System/program Shall Be Designed To promptly Detect, Correct And Prevent Conditions That Adversely Affect Quality. 3.7.2 Calibration System Requirements. Contractor Shall Maintain A Calibration System That Meets The Requirements Of Ansi/ncsl Z540.3, Iso-10012-1 Or An Equivalent Calibration Program Acceptable To The Government. 3.8 6.0 Configuration Management (cm): 3.8.1 The Contractor Shall Maintain A Configuration Management Plan In Accordance With The Provisions Of Navsup Wss Configuration Management Clause Navicpia18. (refer To Contract). 3.9 7.0 Markings. 3.9.1 Marking Shall Be As Indicated In The Contract When Applicable. 3.10 8.0 Storage; 3.10.1 The Contractor Shall Provide A Proper Enclosed Warehouse Environment For Both Material Items Awaiting Repair And Assets Which Have Been Repaired And Are Awaiting Shipment To Ensure The Items Are Not Damaged While Being Stored. 4. Quality Assurance Provisions - Not Applicable. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable

Details: The City of Hämeenlinna (hereinafter also the Procurement Unit / Customer) Requests a participation application for passenger transport in accordance with this Request for Participation and its Appendices. It is a Dynamic Procurement System (dps), through which passenger transports are tendered at that stage, if they cannot be managed through the customer's other procurement contracts (including framework arrangements). Therefore, the Anticipated Value of the Purchase is a so-called Rough Estimate, and the transportation needs can vary significantly from year to year. This is an estimate that does not bind the procurement unit. The Anticipated Value May Be Greater If Options Are Used.","","the Procurement Unit Emphasizes That Even If A Candidate Is Accepted For This Dynamic Procurement System, The Candidate Will Not Necessarily Get Any Transportation To Handle. By Submitting the Application for Participation, the Candidate Has Accepted This Matter as well.","","The Application for Participation in the dynamic procurement system can be submitted at any time during its validity. The validity of the procurement system can be extended with a new procurement notice. The procurement system consists of the so-called establishment phase and the so-called procurement phase. In the establishment phase, applications for participation are accepted, but tenders within the procurement system are not organized yet. During the procurement phase, applications for participation are accepted and, if necessary, tenders within the procurement system are organized.","","After the establishment phase, the decision to accept (or reject) the candidate for the dynamic procurement system will be made within 30 working days of the end of the establishment phase. After that, the decision will be made within ten working days after the application for participation has been received; If additional documents need to be examined in the acceptance evaluation, or if eligibility requirements have to be checked or if there is another justified reason, the decision will be made within 15 working days after the application for participation has been received. - Or during the autumn holidays, and not from Midsummer until mid-August. This can happen, for example, so that the Procurement Unit closes the Dynamic Procurement System Temporarily.

Details: Description Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Philippine Bidding Documents Supply And Delivery Of Various Bucor Vehicles 2025 (procurement/contract No. 010) Sixth Edition July 2020 Bids And Awards Committee 2024 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 6 Section Iii. Bid Data Sheet 16 Section Iv. General Conditions Of Contract 19 Section V. Special Conditions Of Contract 22 Section Vi. Schedule Of Requirements 27 Section Vii. Technical Specifications 29 Section Viii. Bidding Forms 34 Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Invitation To Bid For Supply And Delivery Of Various Bucor Vehicles 2025 1. The Bureau Of Corrections, Through The National Expenditure Program Fy 2025 (capital Outlay) Intends To Apply The Sum Of Seventeen Million Three Hundred Thousand Pesos Only (₱17,300,000.00) Being The Abc To Payments Under The Contract For Supply And Delivery Of Various Bucor Vehicles 2025 With Identification Number __epa-010__. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Bureau Of Corrections Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Within Thirty (30) Calendar Days. Bidders Should Have Completed, Within The Last Four (4) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Equivalent To At Least Fifty Percent (50%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bureau Of Corrections And Inspect The Bidding Documents At The Address Given Below During Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On __december 29, 2024 (08:00am To 05:00pm) To January 20, 2025 (08:00am To 01:29pm)___ From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five (₱25,000.00) Thousand Pesos Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees And Presented In Person. 6. The Bureau Of Corrections Will Hold A Pre-bid Conference On __january 06, 2025 (01:30pm)____ At Bac Conference Room Nbp Reservation Muntinlupa City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before __january 20, 2025 (01:29pm)__. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On __january 20, 2025 (01:30pm)__ At The Given Address Below Bac Conference Room Nbp Reservation Muntinlupa City, Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Schedule Of Bidding Activities Shall Be As Follows: Activites Date/time Venue 1. Sale And Issuance Of Bid Documents December 29, 2024 (08:00am To 05:00pm) To January 20, 2025 (08:00am To 01:29pm)_ Supply Division Bureau Of Corrections Muntinlupa City 2. Pre-bid Conference January 06, 2025 (01:30pm Bac Conference Room Bureau Of Corrections Muntinlupa City 3. Submission And Opening Of Bid Documents January 20, 2025 (01:30pm) Bac Conference Room Bureau Of Corrections Muntinlupa City 11. The Bureau Of Corrections Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Maria Adoracion I. Viñas Office Of The Bac Secretariat Supply Office, Bureau Of Corrections, Muntinlupa City Tel # 02-8809-8587/02-8478-0907 Bacsec2022@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Bucor.gov.ph Date Of Issue: _______________ Ccsupt. Celso S. Bravo Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Bureau Of Corrections Wishes To Receive Bids For The Supply And Delivery Of Various Bucor Vehicles 2025 {[insert, If Applicable:] Under A Framework Agreement}, With Identification Number [indicate Number]. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project Supply And Delivery Of Various Bucor Vehicles 2025 Is Composed Of One (1) Lot, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For National Expenditure Program Fy 2025 (capital Outlay) In The Amount Of Seventeen Million Three Hundred Thousand Pesos Only (₱17,300,000.00). 2.2. The Source Of Funding Is: A. Nga, The General Appropriations Act Or Special Appropriations. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. [select One, Delete Other/s] A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2. [if Procuring Entity Has Determined That Subcontracting Is Allowed During The Bidding, State:] The Bidder Must Submit Together With Its Bid The Documentary Requirements Of The Subcontractor(s) Complying With The Eligibility Criteria Stated In Itb Clause 5 In Accordance With Section 23.4 Of The 2016 Revised Irr Of Ra No. 9184 Pursuant To Section 23.1 Thereof. 7.3. [if Subcontracting Is Allowed During The Contract Implementation Stage, State:] The Supplier May Identify Its Subcontractor During The Contract Implementation Stage. Subcontractors Identified During The Bidding May Be Changed During The Implementation Of This Contract. Subcontractors Must Submit The Documentary Requirements Under Section 23.1 Of The 2016 Revised Irr Of Ra No. 9184 And Comply With The Eligibility Criteria Specified In Itb Clause 5 To The Implementing Or End-user Unit. 7.4. Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Supplier’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address Bac Conference Room Nbp Reservation, Poblacion, Muntinlupa, City And/or Through Videoconferencing/webcasting} As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within The Last Four (4) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 11.5. [include If Framework Agreement Will Be Used:] Financial Proposals For Single Or Multi-year Framework Agreement Shall Be Submitted Before The Deadline Of Submission Of Bids As Prescribed In The Ib. For Multi-year Framework Agreement, Evaluation Of The Financial Proposal During This Stage Is For Purposes Of Determining Eligibility And Whether Or Not Such Financial Proposal Is Within The Abc. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 12.2. [include If Framework Agreement Will Be Used:] For Framework Agreement, The Following Should Also Apply In Addition To Clause 12.1: A. For A Single Year Framework Agreement, The Prices Quoted By The Bidder Shall Be Fixed During The Bidder’s Performance Of The Contract And Not Subject To Variation Or Escalation On Any Account. Price Schedules Required Under Clause 12.1 Shall Be Submitted With The Bidding Documents. B. For A Multi-year Framework Agreement, The Prices Quoted By The Bidder During Submission Of Eligibility Documents Shall Be The Ceiling And The Price Quoted During Mini-competition Must Not Exceed The Initial Price Offer. The Price Quoted During Call For Mini-competition Shall Be Fixed During The Bidder’s Performance Of That Call-off And Not Subject To Variation Or Escalation On Any Account. Price Schedules Required Under Clause 12.1 Shall Be Submitted With The Bidding Documents. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until [indicate Date]. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 14.3. [include If Framework Agreement Will Be Used:] In The Case Of Framework Agreement, Other Than The Grounds For Forfeiture Under The 2016 Revised Irr, The Bid Security May Also Be Forfeited If The Successful Bidder Fails To Sign The Framework Agreement, Or Fails To Furnish The Performance Security Or Performance Securing Declaration. Without Prejudice On Its Forfeiture, Bid Securities Shall Be Returned Only After The Posting Of Performance Security Or Performance Securing Declaration, As The Case May Be, By The Winning Bidder Or Compliant Bidders And The Signing Of The Framework Agreement. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 16.2. [include If Framework Agreement Will Be Used:] For Multi-year Framework Agreement, The Submission Of Bids Shall Be For The Initial Evaluation Of Their Technical And Financial Eligibility. Thereafter, Those Declared Eligible During The Said Initial Eligibility Evaluation And Entered Into A Framework Agreement With The Procuring Entity Shall Submit Anew Their Best Financial Offer At The Address And On Or Before The Date And Time Indicated In The Call For Each Mini-competition. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 18.2. [include If Framework Agreement Will Be Used:] For Multi-year Framework Agreement, Determination Of Margin Of Preference Shall Be Conducted Every Call For Mini-competition. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. [include The Following Options If Framework Agreement Will Be Used:] A. In The Case Of Single-year Framework Agreement, The Lowest Calculated Bid Shall Be Determined Outright After The Detailed Evaluation; B. For Multi-year Framework Agreement, The Determination Of The Eligibility And The Compliance Of Bidders With The Technical And Financial Aspects Of The Projects Shall Be Initially Made By The Bac, In Accordance With Item 7.4.2 Of The Guidelines On The Use Of Framework Agreement. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1 – One Project Having Several Items That Shall Be Awarded As One Contract. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.1. [include If Framework Agreement Will Be Used:] For Multi-year Framework Agreement, All Bidders Initially Determined To Be Eligible And Financially Compliant Shall Be Subject To Initial Post-qualification. The Bac Shall Then Recommend The Execution Of A Framework Agreement Among All Eligible, Technically And Financially Compliant Bidders And The Procuring Entity And Shall Be Issued By Hope A Notice To Execute Framework Agreement. The Determination Of The Lowest Calculated Bid (lcb) Shall Not Be Performed By The Bac Until A Mini-competition Is Conducted Among The Bidders Who Executed A Framework Agreement. When A Call For Mini-competition Is Made, The Bac Shall Allow The Bidders To Submit Their Best Financial Proposals On Such Pre-scheduled Date, Time And Place To Determine The Bidder With The Lcb. 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, {[include If Framework Agreement Will Be Used:] Or In The Case Of Multi-year Framework Agreement, That It Is One Of The Eligible Bidders Who Have Submitted Bids That Are Found To Be Technically And Financially Compliant,}the Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. {[include If Framework Agreement Will Be Used:] For Every Mini-competition In Framework Agreement, The Lcb Shall Likewise Submit The Required Documents For Final Post Qualification.} 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. [include The Following Clauses If Framework Agreement Will Be Used:] 21.2. At The Same Time As The Procuring Entity Notifies The Successful Bidder That Its Bid Has Been Accepted, The Procuring Entity Shall Send The Framework Agreement Form To The Bidder, Which Contract Has Been Provided In The Bidding Documents, Incorporating Therein All Agreements Between The Parties. 21.3. Within Ten (10) Calendar Days From Receipt Of The Notice To Execute Framework Agreement With The Procuring Entity, The Successful Bidder Or Its Duly Authorized Representative Shall Formally Enter Into A Framework Agreement With The Procuring Entity For An Amount Of One Peso To Be Paid To The Procuring Entity As A Consideration For The Option Granted By The Procuring Entity To Procure The Items In The Framework Agreement List When The Need Arises. 21.4. The Procuring Entity Shall Enter Into A Framework Agreement With The Successful Bidder Within The Same Ten (10) Calendar Day Period Provided That All The Documentary Requirements Are Complied With. 21.5. The Following Documents Shall Form Part Of The Framework Agreement: A. Framework Agreement Form; B. Bidding Documents; C. Call-offs; D. Winning Bidder’s Bid, Including The Technical And Financial Proposals, And All Other Documents/statements Submitted (e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; E. Performance Security Or Performance Securing Declaration, As The Case May Be; F. Notice To Execute Framework Agreement; And G. Other Contract Documents That May Be Required By Existing Laws And/or Specified In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Motor Vehicle. B. Completed Within The Last Four (4) Years Equivalent To At Least Fifty Percent (50%) Of The Abc, Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 The Price Of The Goods Shall Be Quoted Ddp Bureau Of Corrections Iwahig Prison And Penal Farm (ippf) Puerto Prinsesa City, Palawan Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 19.3 One Project Having Several Items That Shall Be Awarded As One Contract. 20.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (sales Invoice Or Official Receipt Or End-users Acceptance) 3. Certified True Copy Coming From The Issuing Agency Of Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Audited Financial Statement 7. 2 Sets Photo Copy Of Eligibility And Financial Envelope Marked As “copy 1” And “copy 2” 21.2 No Additional Contract Documents. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. [include The Following Clauses If Framework Agreement Will Be Used:] 2.3. For A Single-year Framework Agreement, Prices Charged By The Supplier For Goods Delivered And/or Services Performed Under A Call-off Shall Not Vary From The Prices Quoted By The Supplier In Its Bid. 2.4. For Multi-year Framework Agreement, Prices Charged By The Supplier For Goods Delivered And/or Services Performed Under A Call-off Shall Not Vary From The Prices Quoted By The Supplier During Conduct Of Mini-competition. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184.{[include If Framework Agreement Will Be Used:] In The Case Of Framework Agreement, The Bidder May Opt To Furnish The Performance Security Or A Performance Securing Declaration As Defined Under The Guidelines On The Use Of Framework Agreement.} 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project {[include If Framework Agreement Will Be Used:] Or Framework Agreement} Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 1 [list Here Any Additional Requirements For The Completion Of This Contract. The Following Requirements And The Corresponding Provisions May Be Deleted, Amended, Or Retained Depending On Its Applicability To This Contract:] Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: The Delivery Terms Applicable To This Contract Are Delivered To Bureau Of Corrections Iwahig Prison And Penal Farm (ippf) Puerto Prinsesa City, Palawan. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Acting Director, Directorate For Engineering Services. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: A. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And B. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Cost Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of [indicate Here The Time Period Specified. If Not Used Indicate A Time Period Of Three Times The Warranty Period]. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within [insert Appropriate Time Period] Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Not Applicable 4 The Inspections And Tests That Will Be Conducted Are: Partial/complete Goods Shall Be Inspected By The Tiac Technical Inspection And Acceptance Committee. Representative From Supply Division To Be Witnessed By: Coa Representative The Goods Shall Be Accepted By The End User After Passing The Inspection Of The Tiac (technical Inspection And Acceptance Committee). 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. Section Vi. Schedule Of Requirements Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Section Vi. Schedule Of Requirements Supply And Delivery Of Various Bucor Vehicles 2025 The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Delivered, Weeks/months 1 Prison Van 6 30 Calendar Days 2 Staff Car 2 30 Calendar Days 3 Staff Car 4 30 Calendar Days I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Section Vii. Technical Specifications Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Technical Specifications Item Specification Statement Of Compliance 1 Prison Van Overall Dimensions L X W X H (mm): 4,600 X 1,695 X 1,955 Wheelbase: 2400 Seating Capacity: 3 Engine Type Type: 4ja1 Direct Injection Common Rail Displacement (cc):2499 Maximum Output (ps/rpm): 78 Hp @3900 Rpm Maximum Torque (nm/rpm): 176.5 Nm @ 1800 Rpm Fuel Type: Diesel Fuel Tank Capacity: 50 Liters Transmission: 5-speed Manual Brakes: Front: Ventilated Discs Rear: Drum. Leading & Trailing Tires: 195r 14c 8pr Wheels (size): 14 X 5.5jj (6 Studs) Color: Camouflage Safety And Security Blinker And Siren Comm. Sys. Basic Tools, Jack And Manual Others: Bucor Logo Registration: 3 Years Lto Registration 1 Year Gsis Comprehensive Insurance __________________________________________ Specify The Brand Name And Model Being Offered I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Specifications. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Technical Specifications Item Specification Statement Of Compliance 2 Staff Car Overall Dimensions L X W X H (mm): 4,735 X 1,830 X 1,795 Seating Capacity:8 Engine Type Type: 4-cylinder, In-line, 16-valve Double Overhead Camshaft (variable Nozzleturbo Charger W/ Intercooler) Engine Displacement (cc): 2755 Maximum Output (ps/rpm) 174 / 3,400 Maximum Torque (nm/rpm): 360 / 1,200 - 3,400 Fuel Type: Diesel 1 Gd - Ftv 6 - Speed At Multi - Reflector Halogen Black+silver Front Grille Function Fabric (black)* With Keyless Entry Eco+power Apple Carplay + Android Auto Safety And Security Driver + Front Passenger + Knee (d) With + Brake Assist + Ebd With Vehicle Stability Control ( Vsc) With Hill-start Assist Control (hsa) With Reverse Camera Other Modification: Color- Black Blinker And Siren Com. Sys. Basic Tools, Jack And Manual Others: Bucor Logo- Magnetic Type Registration: 3 Years Lto Registration 1 Year Gsis Comprehensive Insurance _________________________________________ Specify The Brand Name And Model Being Offered I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Specifications. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Technical Specifications Item Specification Statement Of Compliance 3 Staff Car Overall Dimensions L X W X H (mm): 4,395 X 1,730 X 1,690 Wheelbase(mm): 2750 Seating Capacity: 7 Engine Type Type: 4-cylinder, In-line, 16-valve Dohc With Duel Vvt-idisplacement (cc):1329 Maximum Output (ps/rpm) 98/6000 Maximum Torque (nm/rpm): 122/4200 Fuel Type: Gasoline Fuel Tank Capacity: 43l Chassis Drivetrain: Front Wheel Drive Cvt Transmission 1nr-ve Brakes: Front: Disc Rear: Drum Tires: 185/ 65 R15 Alloy 15" Alloy Wheels __________________________________________ Specify The Brand Name And Model Being Offered I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Specifications. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Technical Specifications Item Specification Statement Of Compliance 3 Continuation: Exterior Segment Lcd Mid Headlamps: Split Type Led Rear Combination: Led Lamp 2-tone Interior Function Key Start Digital Aircon Control Back Camera & Sensor 8" Audio Display With Apple Carplay And Android Auto Safety And Security Driver And Front Passenger Airbags Alarm+immobilizer+indicator Back Camera Color: Black Metallic 1 Blinker And Siren Comm. Sys. Basic Tools, Jack And Manual Others: Bucor Logo- Magnetic Type Registration: 3 Years Lto Registration 1 Year Gsis Comprehensive Insurance __________________________________________ Specify The Brand Name And Model Being Offered I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Specifications. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Section Viii. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Eligibility Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages); Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Bidders Should Have Completed, Within The Last Four (4) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Equivalent To At Least Fifty Percent (50%) Of The Abc, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And (h) Conformity With The Schedule Of Requirements; And ⬜ (i) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And A. Certificate Of Dealership B. List Of Service Centers Nationwide C. Certificate Of Availability Of Spare Parts D. Brochure And ⬜ (j) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate/board Resolution In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc; Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation At Least Equal To Ten Percent (10%) Of The Abc. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Each Partner Of The Joint Venture Shall Submit Their Respective Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Bidding Forms Company Letterhead Statement Of Ongoing Government & Private Contracts Supply And Delivery Of Various Bucor Vehicles 2025 Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Value Of Outstanding Contract Total Value Of Outstanding Contract: Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Supply And Delivery Of Various Bucor Vehicles 2025 Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Four (4) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Fifty Percent (50%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Delivery Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Supply And Delivery Of Various Bucor Vehicles 2025 Certificate Of Net Financial Contracting Capacity (please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _____________________ (p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _________________day Of ________________, 2025 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Supply And Delivery Of Various Bucor Vehicles 2025 Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: [insert Reference Number] To: Bureau Of Corrections I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Ten (10) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. ______________________________________________________ [insert Name Of Bidder’s Authorized Representative] _____________________________ [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ Issued On ______________ At ___________________________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply And Delivery Of Various Bucor Vehicles 2025 Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1 Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: A) If A Sole Proprietorship: As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply And Delivery Of Various Bucor Vehicles 2025 Of The Bureau Of Corrections, As Shown In The Attached Duly Notarized Special Power Of Attorney; B) If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply And Delivery Of Various Bucor Vehicles 2025 Of The Bureau Of Corrections, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting ; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder]is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The Supply And Delivery Of Various Bucor Vehicles 2025. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 2025 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ And Issued On ____________________ At _____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply And Delivery Of Various Bucor Vehicles 2025 Bid Form Date: Invitation To Bid No: [insert Reference Number] To: Bids And Awards Committee Bureau Of Corrections Nbp Reservation Muntinlupa City Gentlemen And/or Ladies: Having Examined The Bidding Documents Including Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply And Delivery Of Various Bucor Vehicles 2025 In Conformity With The Said Bidding Documents For The Sum Of ________________________________________₱_________________ Or Such Other Sums As May Be Ascertained In Accordance With The Schedule Of Prices Attached Herewith And Made Part Of This Bid. We Undertake, If Our Bid Is Accepted, To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements. If Our Bid Is Accepted, We Undertake To Provide A Performance Security In The Form, Amounts, And Within The Times Specified In The Bidding Documents. We Agree To Abide By This Bid For The Bid Validity Period Specified In Bds Provision For Itb Clause 17.1 And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period. Commissions Or Gratuities, If Any, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Of Agent Amount And Currency Purpose Of Commission Or Gratuity (if None, State “none”) Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And You’re Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements As Per Itb Clause 5 Of The Bidding Documents. We Likewise Certify/confirm That The Undersigned, [for Sole Proprietorships, Insert: As The Owner And Sole Proprietor Or Authorized Representative Of Name Of Bidder, Has The Full Power And Authority To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract, On The Latter’s Behalf For The Supply And Delivery Of Various Bucor Vehicles 2025 Of The Bureau Of Corrections. [for Partnerships, Corporations, Cooperatives, Or Joint Ventures, Insert: Is Granted Full Power And Authority By The Name Of Bidder, To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract On The Latter’s Behalf For Supply And Delivery Of Various Bucor Vehicles 2025 Of The Bureau Of Corrections. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Shall Be A Ground For The Rejection Of Our Bid. Dated This ________________ Day Of ________________ 2025. [signature Over Printed Name] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of __________________________ Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Schedule Of Prices Supply And Delivery Of Various Bucor Vehicles 2025 Quantity Units Agency Specification Abc Unit Price Total Bid Price Inclusive Of Vat 6 Units Prison Van ₱8,700,000.00 2 Units Staff Car ₱3,600,000.00 4 Units Staff Car ₱5,000,000.00 Total: ₱17,300,000.00 Total Bid Price Inclusive Of Vat In Words [signature Over Printed Name] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of _______________________________ Sixth Edition July 2020 Bids And Awards Committee 2024

Purchaser Name: FEDERAL PUBLIC INSTITUTION THE MAIN CENTER OF ADMINISTRATIVE, ECONOMIC AND TRANSPORTATION SUPPORT OF | Тендер Поставка Венков С Лентами, Корзин Плетеных Из Срезанных Цветов С Лентами, Гвоздик, Букетов И Композиций Из Свежесрезанных Цветов Для Нужд Мвд России.