Transport Tenders

Details: Description Invitation To Bid Project No.: (24-10-026) Procurement Of Materials And Tools For Inclusive Learning Resource Center 1. The Department Of Education (deped) Division Of Sultan Kudarat, Through The Cy 2024 Government Appropriations Act (gaa), Intends To Apply The Sum Of Two Million Six Hundred Thirty-one Thousand Five Hundred Thirty Pesos And Two Centavos (p2,631,530.02), Being The Approved Budget For The Contract (abc), To Eligible Payments Under The Contract For Procurement Of Materials And Tools For Inclusive Learning Resource Center Under Republic Act 11975 –fy 2024 Gaa. Bids Received That Exceed The Abc Shall Be Rejected At Bid Opening. Unit Item Description Quantity Unit Cost Total Cost Addition Specification Procurement Of Materials And Tools For Inclusive Learning Resource Center Piece Rubber Mat 36 1,083.33 39,000.00 Interlocking Rubber Mat 1 Meter X 1 Meter X 1" Unit Indoor Therapy Gym 1 106,509.70 106,509.70 89" High X 8', 10', Or 12' Long Monkey-bar System Free-standing Unit - Requires No Additional Bracing For Support Climbing Ladders On Both End Jungle Gym Crossbar Stationary Center Rotary System On 8' And 10' Models. Double Stationary Center Rotary System On 12' Model A Tracking System That Glides The Length Of The Monkey Bars Different Attachments Can Be Added Including Our Indoor Therapy Gym Attachments Kit And Platform Swing. Piece Vestibular Balls 5 1,100.00 5,500.00 Material Rubber Pattern Plain Shape Round Sizes 45-120 Cm (5 Sizes) 1,000/piece Unit Gait Trainer 1 60,500.00 60,500.00 Set Soft And Foldable Ball Pit Large 1 63,283.00 63,283.00 Small Round: 63" Diameter X 15.7"h. Weighs 14.3 Lbs. Holds 4-5 Kids And 1250 3" Diameter Balls. Color: Blue. Small Padding: 63" Diameter X 0.78"h. Weighs 14 Lbs. Small Padding: 63" Diameter X 0.78"h. Weighs 14 Lbs. Large Round: 78.7" Diameter X 15.7"h. Weighs 18.5 Lbs. Holds 6-7 Kids And 1500 3" Diameter Balls. Color: Blue. Large Padding: 78.7" Diameter X 0.78"h. Weighs 18.5 Lbs. Large Padding: 78.7" Diameter X 0.78"h. Weighs 18.5 Lbs. Medium Square: 78.7"l X 47.2"w X 15.7"h X 1.9"d. Weighs 20 Lbs. Holds 4-5 Kids And 1000 3" Diameter Balls. Pistachio, Blue, Orange And Lilac. Medium Padding: 78.7"l X 47.2"w X 0.78"h. Weighs 20 Lbs. Large Square: 78.7"l X 78.7"w X 15.7"h X 1.9"d. Weighs 27.6 Lbs. Holds 6-7 Kids And 1250 3" Diameter Balls. Pistachio, Blue, Orange And Lilac. Large Padding: 78.7"l X 78.7"w X 0.78"h. Weighs 27.5 Lbs. Made Of Pvc Upholstery. Filled With Polyethylene Foam Surface Wash. Air Dry. Unit Platform Swings( 2 Swings) 1 29,040.00 29,040.00 Adjusts In Tilt Using Control Lines Attached To A Top Disc Features A Soft Padded Edge That Prevents Therapist Injury Can Be Used In A Range Of Positions, Including Sitting, Standing, Prone, And Supine Adaptation Provides Security For Clients Who Feel Uncomfortable Taking Their Feet Off The Floor Adaptation Makes It Possible To Introduce Infants And Smaller Children To The Platform Swing Dimensions: 31"l X 31"w X 60"h Working Load: 300 Lbs. Weight: 21 Lbs. Set Indoor Climbing Walls 1 44,776.05 44,776.05 Six Wood Panels Adjustable Anchor Kit (select Either Concrete Or Dry Wall Style) Wall Bracket (required For Adjustable Anchor Kit) Letter Climbing Handholds (sold In Sets Of Six Ea.) Number Climbing Handholds (sold In Sets Of Six Ea.) Character Climbing Handholds (sold In Sets Of Six Ea.) Plain Climbing Handholds (sold In Sets Of Ten Ea.) Set Trampoline With Handrail 2 8,833.00 17,666.00 40-inch Jumping Surface Area Handrail Adjusts From 28.5" To 36.5"h 16lbs. Holds Up To 300 Lbs Black Unit Tumble Barrels 1 38,016.00 38,016.00 Inside Diameter 12" Outside Diameter: 22" Weight Capacity: 250 Lbs Latex Free Set Tactile Walls And Interacitve Equipment 1 126,808.00 126,808.00 Tactile Panel Measures 1820mm Wide X 1800mm High, 400mm To Be Cemented Into The Ground During Install. Set Wall Bars 1 3,509.00 3,509.00 Size: 190*70*10 Material: Beech Wood Or Poplar Wood Weight Bearing:150kgs Moq: 100pcs Set Adl Boards 1 1,149.50 1,149.50 6 Colors, 6 Different Dressing Skills Training. It Is A Good Way To Exercise Your Child's Finger Flexibility And Help The Kids Learn The Most Basic Dressing Skills. Is A Good Parent-child Toy.also A Good Preschool Education And Kindergarten Toys. A Quiet Skill Book Made Of Cardboard And Non-woven Fabric. Suitable For Children 2-7 Years Old. Package Dimensions: 11.73 X 9.76 X 2.28 Inches Item Weight: 1.28 Pounds Piece Horizontal Bolster Swing 1 3,500.00 3,500.00 Piece Sky Walker Swing 1 3,500.00 3,500.00 Piece Cuddle Swing 1 3,500.00 3,500.00 Piece Vertical Bolster Swing 1 3,500.00 3,500.00 Piece Rainbow Cloth Swing 1 3,000.00 3,000.00 Piece Box Swing 1 3,000.00 3,000.00 Piece Cargo Net 1 1,500.00 1,500.00 Piece Rock Wall Climbing 2 2,000.00 4,000.00 Set Crash Mat (5ft., Diameter 2in Thick) 4 4,500.00 18,000.00 Piece Crash Mat (5ft., Diameter 4in Thick) 4 7,150.00 28,600.00 Piece Foam (150cm X 150cm) 5 4,000.00 20,000.00 Piece Heavy Work Barrel 1 1,500.00 1,500.00 Piece Yoga Mat 10mm 2 500.00 1,000.00 Piece Yoga Ball 2 1,000.00 2,000.00 Piece Ball Pit 1 1,500.00 1,500.00 Set Rubber Wiggle Cushion 2 800.00 1,600.00 Set Rubber Hopper Ball 1 1,000.00 1,000.00 Piece Play Tunnel 1 1,500.00 1,500.00 Piece Pediatric Tent 1 2,500.00 2,500.00 Piece Punching Speed Ball 1 2,000.00 2,000.00 Piece Ready Stock Wooden Sorting Stacking Toys For 1-3 Years Old Toddlers Color Recognition Stacker Shape 3 1500 4,500.00 Piece The Learning Journey Lift & Learn Colors And Shapes Puzzle 3 1200 3,600.00 Piece Baby Toys 0-1-3 Year Old Puzzle Tower Children Tower Cup Sets Of Rings 6-12 Months 2 500 1,000.00 Piece Montessori Wooden Educational Toys For Kids Seven In One Traffic Matching Board Free 2 800 1,600.00 Set Montessori Around Bead Maze Gear Game Shape Matching Educational Alphabetic Animal Cognition 2 4000 8,000.00 Piece Wooden Giant Multifunctional Montessori Toy Box 3 1500 4,500.00 Unit Beestech Wooden Lacing Toy, Montessori Toys For Toodlers, 2, 3, Year Olds, Wooden Puzzles Preschool Activities, Fine Motor Skills Early Educational Toys For 2, 3 Years Old 3 1200 3,600.00 Unit Montessori Early Education Montessori Cylinder Socket Sensory Teaching Aids Educational 3 800 2,400.00 Unit Baby Shoe Tying Board Puzzle Shoe Tying Practive Toy With Round Buttons Sneaker Teaching Tie 4 500 2,000.00 Unit Lacing Jumbo Bead Toys 4 500 2,000.00 Unit Toddler Flah Cards-colors, Shapes, Numbers And Alphabet Flahscards 5 500 2,500.00 Unit Baby's First- First Objects Flash Cards -learning Tools For Kids 5 500 2,500.00 Unit 8 Types Of Double Sided Flahs Cards For Educational English Flash Cards, Children's Learning 5 300 1,500.00 Unit Enbe Economical Washable Non-slip Base Carpet E-fl-2001e 40cm X 60cm 2 1200 2,400.00 Unit Bulletin Cork Board 450x600mm/18x25in 2 700 1,400.00 Unit White Board, 50.3cm Height, 89.1cm Width, Magnetic 1 8000 8,000.00 Unit Tissue Paper Pack 5 300 1,500.00 Unit First Aid Kit Cabinet 1 2500 2,500.00 Piece Toilet Package (toilet Bowl With Flush, Sink, Fauet, Soap Dish And Tissue Holder) 1 8000 8,000.00 Set Stapler (big) 2 500 1,000.00 Piece Staples (big) 2 300 600.00 Piece White Board Pen 3 250 750.00 Piece White Board Ink 2 350 700.00 Piece Spray Bottle 2 200 400.00 Piece Laminator (hot And Cold) 1 4000 4,000.00 Piece Laminating Film(long)(125mic) 5 600 3,000.00 Bottle Universal Ink For Computer Printer (black, Cyan, Magenta & Yellow) 12 100 1,200.00 Piece Draw A Person: Screening Procedure For Emotional Disturbance (draw A Person: Sped) 1 19800 19,800.00 Piece Behavior Rating Inventory Of Executive Function - Second Edition 1 90900 90,900.00 Piece Developmental Profile 4 (dp-4) 1 70800 70,800.00 Piece Multiscore Depression Inventory For Children (mdi-c) 1 45000 45,000.00 Piece Autism Diagnostic Interview, Revised (adi-r) 1 65300 65,300.00 Piece Adult Suicidal Ideation Questionnaire (asiq) 1 28550 28,550.00 Meters Multidimensional Anxiety Questionnaire (maq) 1 115300 115,300.00 Sets Wechsler Intelligence Scare For Children – Fifth Edition (wisc-v) 1 390050 390,050.00 Piece Attention-deficit/hyperactivity Disorder Test 2nd Edition (adhdt-2) 1 37000 37,000.00 Glass Asperger Syndrome Diagnostic Scale 1 33,000 33,000.00 Piece Soap Dish 2 35.85 71.70 Piece Powder Detergent 2 228.50 457.00 Set Toilet Cleaning Brush With Holder 2 199.00 398.00 Set Shampoo Large 5 500.00 2,500.00 1liter Piece First Aid Kit And Cabinet 1 1,500.00 1,500.00 Piece Tissue Paper 12 Pcs Pack 8 300.00 2,400.00 Piece Hand Soap 10 50.00 500.00 Set Pans 3 250.00 750.00 Piece Toilet Paper Holder 3 237.60 712.80 Set Dipper 7 39.93 279.50 Piece Pail 9 199.56 1,796.00 Bottles Toothbrush 2 396.00 792.00 Piece Hairbrush 5 150.00 750.00 Piece Comb 10 50.00 500.00 Tube Toothpaste 10 150.00 1,500.00 Piece Plastic Tumbler 15 262.90 3,943.50 Set Razor 10 51.70 517.00 Set Nailclipper 20 74.80 1,496.00 Set Nail File 20 50.00 1,000.00 Set Deodorant 10 380.00 3,800.00 Set Feminine Napkin 10 300.00 3,000.00 Set Dust Catcher With Broom 1 558.40 558.40 Set Feather Duster 5 150.00 750.00 Dozen Sponge 12 10.00 120.00 Pieces Spray Bottle 5 150.00 750.00 Pieces Table Napkins 15 85.00 1,275.00 Pieces Placemat 10 100.00 1,000.00 Set Plates Large Size 5 550.00 2,750.00 Piece Pitcher 5 577.00 2,885.00 Pieces Bowls 30 20.00 600.00 Set Water Pail Large 1 500.00 500.00 Pieces Laundry Bar Soap 12 29.80 357.60 Pieces Clothesline 4 117.60 470.40 Packs Clothes Pins 5 130.80 654.00 Set Wash Basin 2 508.90 1,017.80 Set Laundry Bag 5 396.80 1,984.00 Pack Hangers 10 149.75 1,497.50 Pairs Socks 10 50.00 500.00 Piece Dress 1 275.00 275.00 Piece Dish Organizer 1 4,500.00 4,500.00 Sets Bed Sheets 4 1,899.00 7,596.00 Pieces Curtain 6 200.00 1,200.00 Piece Alarm Clock 1 446.60 446.60 Pcs Reading Stand 20 350.00 7,000.00 Piece Portable Generator Set 1 30,000.00 30,000.00 1250wx60hz Max Output, 1100w Rated Output Unleaded Gasoline 3.0hp Piece Trolley Table 1 4,300.00 4,300.00 Sets Canister With Scoop 6 200.00 1,200.00 Unit Learners'/clients' Chart Materials 10 254.10 2,541.00 Set Anatomical Models 1 37,873.00 37,873.00 Unit Blood Pressure 2 3,410.00 6,820.00 Unit Stethoscope 2 1,067.00 2,134.00 Piece Tape Measure 2 115.50 231.00 Piece Hand Dynamometer 2 1,650.00 3,300.00 Pack Ice Massage Caps 3 572.00 1,716.00 Unit Adjustable Height Exercise Steps 1 3,300.00 3,300.00 Piece Pediatric Examination Gowns 5 2,057.00 10,285.00 Piece Bath Towels 5 2,860.00 14,300.00 Material: High Quality 100% Cotton Terry – 500gm2. Size: 90 X 180cm. Pack Bed Sheets 1 2,000.00 2,000.00 Waterproof 5.5 Mil Vinyl Contoured Corners, Fitted 36" X 80" X 6" Case Of 12 Set Pillowcase 4 165.00 660.00 Piece Blankets 4 330.00 1,320.00 100% Canadian Cotton, Soft Texture, High Quality Fabric Size: 52 X 90 Inch Unit Step Stools 2 1,980.00 3,960.00 Double Steel Caravan Step. Rubber Non- Slip Steps. Leg Distance Front To Back 65 Cm. Width 42 Cm. Top Step Height 38 Cm. Bottom Step 20 Cm. Unit Therapist Stools On Wheels 2 3,212.00 6,424.00 Description: This Stool Can Be Adjusted To Just About Any Position You Want, Making It Incredibly Versatile And Comfortable. It Has A 360-degree Swivel So You Can Quickly Spin Around To Access Anything You Need At Home Or In The Office. The Unique Saddle Seat Has Thick Padding, Making It Easy For You To Stay In The Same Place For Hours At A Time. Piece Kinesiology Tape 5 1,034.00 5,170.00 Ultra-strong And Sticky-hypoallergenic Adhesive Water Resistant 97% Cotton, 3% Nylon 180% Stretch For Full Range Of Motion Latex And Zinc Free Sticks 2-7 Days 5-10 Applications Per Roll Each Is 2"x 16.4" (5cmx5cm) Gloves Gloves 2 180.00 360.00 Box Bubbles 5 200.00 1,000.00 Box Ballon 3 200.00 600.00 Box Playdough 3 250.00 750.00 Box Sad Box 2 250.00 500.00 Set 40 Pack Brick Block Set 12x6x3 1 8,542.50 8,542.50 Piece Puzzle Games Educational 5 300.00 1,500.00 Set Flash Cards Animals,colors, Numbers, Shapes 10 300.00 3,000.00 Piece Doctor Set Toy 1 700.00 700.00 Piece Cooking Set Toy 1 700.00 700.00 Piece Tool Set Toys 1 700.00 700.00 Piece Magnetic Fishing Toy 1 500.00 500.00 Piece Story Books With Integration Of Math,science,epp 20 150.00 3,000.00 Piece Containers Jar Plastic 10 50.00 500.00 Box Whistle 1 280.00 280.00 Box Baby Tether 10 80.00 800.00 Pack Figure Toys 5 300.00 1,500.00 Piece Shape Sorter 1 400.00 400.00 Piece Ring Stacking Toys 2 200.00 400.00 Pack Balls (plastic Balls) 2 250.00 500.00 Box Tongue Depressor 5 200.00 1,000.00 Set Communication Boards 3 5,082.00 15,246.00 Book And Cards Specification: Binder Features Two Interior Storage Pockets For Loose Materials, Color Black, And It Measures 9x7.5 Convenient To Travel And Put In Your Child's Backpack Or Carry In Hand. Binder Comes With 5 Different Colorful 10 Mil Poly Dividers, 3 Hard Strips (hook) Attached On Each Side To Hold 30 Cards. Each Card Measures 1.5 X 1.5. Inch Mounted With 1/2-inch Soft Dot (loop), And Round Corner Cut Safe For Little Hands From Scratching And Poking. Set Dry Erase Sleeves 5 550.00 2,750.00 Set Wind Up Toys 1 1,140.70 1,140.70 Piece File Folders 10 110.00 1,100.00 File 2 Rings 2" Thick Or 3" Thick From Cover To Cover Front , Inside And Back Cover Are All Same Cover Size: Long 14"l X 11"w X 3" Thick Color(s): Black, Blue, Green, Red Set Articulation Cards Super Duper Publications Set Of 7 Webber Articulation Card Decks With Animal Artic Pairs Combo Set 3 Educational Learning Resource For Children Super Duper Publications Super .. 1 13,302.85 13,302.85 Set Cognitive Cards For English Vocabulary In Early Childhood Education For Infants And Young Children,high Frequency Sight Word Flash Cards For Kindergarten Homeschool Supplies . 3 250.00 750.00 Set Single Vowels Double Vowels Single Consonants Double Consonants Sino Korean Numbers (useful Numbers Only) Pure Korean Numbers (useful Numbers Only) Months Of The Year Days Of The Week Telling Time Basic Words And Phrases Around The House 3 250.00 750.00 Pc 220 Sight Words High-frequency Poster Educational Set 10pcs Charts Vocabulary Building English Words Learning Materials For Kids Preschoolers Toddlers Classroom Wall Decorations Eeading Comprehension Prctice A4 Big Card 5 200.00 1,000.00 Pc 4 Pack Small Whisper Phones Speech Therapy Toys For Reading & Auditory Feedback - Hear Myself Sound Phone 8 250.00 2,000.00 Pc Word Sentence Pocket Charts Classroom Chart Standard Pocket Chart 5 636.00 3,180.00 Piece Adaptive Swim Life Jacket For Disabled 2 2,872.00 5,744.00 Piece White Bath Towels 15 379.75 5,696.25 Piece Broom With Dustpan Plastic 1 349.75 349.75 Set Hanger 12 Pieces Per Set 12 149.75 1,797.00 Piece Bath Soap 15 50.00 750.00 Set Wood Bathroom Mirror Cabinet 1 4,886.00 4,886.00 Piece Googles-silicon Strap Ywg278 6 99.50 597.00 Piece Ditrio Swim Ring Assorted Design And Color 2 279.50 559.00 Piece Ditrio 80 Cm Swim Ring Dino Design With Handle And Glitters Sya2061 2 279.50 559.00 Piece Spence Pvc/h Swim Goggles 6 199.00 1,194.00 Piece Inflatables Sports Ball 3 59.75 179.25 Piece Watermelon Design Swim Ring 70cm 4 179.50 718.00 Piece Beach Ball Colored Plastic 4 149.00 596.00 Piece Beach Volley Ball White Color 5 119.00 595.00 Piece 80 Cm Swim Ring Assorted Design Sya 6 159.50 957.00 Piece Swim Vest Small Ywsyb5022 4 259.50 1,038.00 Piece Swim Vest Medium Ywsyb5025s 4 159.50 638.00 Piece Swim Vest Large Ywsyb5023 4 199.50 798.00 Piece Water Gun 2 99.50 199.00 Piece Raion B/c Water Blaster 2 229.00 458.00 Piece Spence Pvc/h Swim Goggles 2 249.00 498.00 Piece Inflatable Md (1234619595506) 3 49.00 147.00 Piece Inflatable Md (1234614252) 3 79.00 237.00 Piece Bulletin Board 1 599.00 599.00 Piece Shoe Rack Platic/steel 2 699.75 1,399.50 Pieces Ball Pins 5 97.90 489.50 Pieces Acrylic Color Set 20 580.00 11,600.00 Pieces Cutters 20 68.00 1,360.00 Sets Watercolors 15 415.80 6,237.00 Reams Art Paper (multiple Colors) 20 218.90 4,378.00 Set Paint Brushes 15 250.00 3,750.00 Pieces Yarn Assorted Colors 20 71.50 1,430.00 Sets Colored Pencils 15 396.00 5,940.00 Sets Colored Pens 15 119.90 1,798.50 Pieces Sewing Pins 20 16.50 330.00 Pieces Sewing Needles 20 22.00 440.00 Pieces Rotary Cutter 10 159.50 1,595.00 Pieces Tape Measure 10 27.50 275.00 Pieces Crochet Hooks 15 284.90 4,273.50 Pieces Knitting Needles 15 104.50 1,567.50 Pieces Crochet Thread 20 45.10 902.00 Boxes Sewing Thread Assorted Colors 20 60.50 1,210.00 Pieces Studio/painting Easel 5 550.00 2,750.00 Pieces Manual And/or Electric Pencil Sharpener 5 64.90 324.50 Pieces Wooden Mannequin With Stand 1 1,200.00 1,200.00 Pieces Transparent Edge T-square 5 660.00 3,300.00 Sets 1 Toolset L Tool Set L Carpentry Tools L Maintenance Home Tools L Accessory Repair Tools L Taclight L Tac Light L Military Flashlight L Ultra Bright L Rechargeable Battery And Charger 2 1,493.80 2,987.60 Pieces T50 Staple Gun With Staples 10 163.90 1,639.00 Piece Slop Sink Stainless Large 2 9,075.00 18,150.00 Pieces Roofing Square Dual Marking Right Angle Picture Framing Carpenter Ruler 5 148.50 742.50 Pieces Professional Compound Mitre Box & Saw 10 533.50 5,335.00 Pieces Drawing Lamp 5 768.90 3,844.50 Pieces Chisel Rack For Wood Carving 5 1,042.80 5,214.00 Pieces Corner Clamp 10 211.20 2,112.00 Sets Decorative Realistic Artificial Fruits 2 589.60 1,179.20 Sets Geometric Shapes Set 2 1,760.00 3,520.00 Pieces Geometric Designer Templates 2 306.19 612.37 Pieces Stack Rack 2 5,608.90 11,217.80 Pieces Picture Frame And Miter Clamp 20 180.00 3,600.00 Pieces Heat Gun 5 770.00 3,850.00 Pieces Hot Plate Single Electric Stove 5 162.80 814.00 Pieces Tape Dispenser 5 107.80 539.00 Pieces Multi-function Three-hole Puncher 5 330.00 1,650.00 Pieces Metric Scale 8 55.00 440.00 Pieces Steel Tape Measure 15 Ft Or More 5 330.00 1,650.00 Pieces Heavy Duty Circular Saw 4 2,310.00 9,240.00 Pieces Abrasive Disc Cutter Machine 2 6,600.00 13,200.00 Set Manual Canvas Pliers 3 440.00 1,320.00 Sets Jet-bow Compass Set 5 220.00 1,100.00 Set Human Head Model 1 2,500.00 2,500.00 Sets Screw Drivers Set With Box 3 450.00 1,350.00 Sets Pliers And Grip Set 40 In 1 With Box Set 4 1,800.00 7,200.00 Pieces Artist Stool With Wheels 10 600.00 6,000.00 Pieces Screen Print Squeegee 10 500.00 5,000.00 Pieces Mixing Paint Palette 10 550.00 5,500.00 Sets Carving Chisels For Wood 5 550.00 2,750.00 Sets Files Set For Jeweler, Wood Carving, Craft Metal And Glass Stone 2 1,100.00 2,200.00 Pieces Heavy Duty Multi-purpose Bench Vise 2 1,320.00 2,640.00 Piece Anvil 1 880.00 880.00 Pieces Welding Protective Suite 5 500.00 2,500.00 Pieces Welding Apron 5 250.00 1,250.00 Pieces Welding Hood Caps 5 440.00 2,200.00 Pieces Welding Gloves 10 176.00 1,760.00 10.5" Welding Leather Gloves Hgvc01 *winland* Product Description • Size: 10.5" • Use For Driver, Machining Operator Etc. • All Applications Which Require A High Level Of Anti-skid And Abrasion-resistant • Applying Universally To The Transporting And Cargo Handling Workers, Recycling Work, And Horticulture Workers, Drivers And Etc. • Cow Split Leather Gloves • Full Palm, Full Lining • Made With Top Quality Material For Industrial And Commercial Use Pieces Welding Protective Visitor Glasses 4 99.00 396.00 Protective Visitor Glasses: Anti-fog With Uv Protection Glasses Product Name：safety Eyewear Glasses Color：clear, Dark Grey Feature：protective Glasses Lens Color：clear, Dark Grey Style：work Safety Glasses Package：blister Size: 17*17*7cm Pieces Welding Helmet With Auto Darkening 2 500.00 1,000.00 Auto Darkening Welding Helmet Ahm009 Viewing Area:90×35mm Cartridge Size:110×90×10mm Arc Sensor:2 Light State:din 4 Dark State:fixed Shade 10 Shade Control:unadjustable Power On/off:fully Automatic Sensitivity Control:unadjustable,auto Uv/ir Protection:din 16 Power Supply:solar Cells. Re-chargeable Battery .no Battery Change Required Switching Time:1/5000s,from Light To Dark Dark To Light:0.15-0.45s Auto Low Amperage Tig:≥20amps(dc), ≥20amps(ac) Operating Tep:-5°c~+55°c Storing Tep:-20°c~+70°c Pieces Welding Mask 2 440.00 880.00 Product Details Of Heavy Duty Welding Mask (108x50x3mm) Movable Glass Impacted Resistant Shell Anti Wear Moveable Type Glass Packing: Polybag With Color Sticker Pieces Hard Hat 12 330.00 3,960.00 Hard Safety Helmet With Chin Strap Color: Blue, Orange, White, Yellow Material: Acrylonitrile Butadiene Styrene (abs) Shell, With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap Tough, Lightweight, Durable With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap. A Hard Hat Is A Type Of Helmet Predominantly Used In Workplace Environments Such As Industrial Or Construction Sites To Protect The Head From Injury Due To Falling Objects, Impact With Other Objects, Debris, Rain, And Electric Shock. Durable, Lightweight And Comfortable Piece Heat Press Transfer Machine 1 9,900.00 9,900.00 Electric Powered 21.2 X 20.2 X 19.2 In. 220v 1800w 0-400˚f (0-220˚c) 0-999 Sec. Pieces Rubber Mallet 4 330.00 1,320.00 Rubber Hammerhead Fiberglass Handle Packing: Color Label Weight: 32oz Pieces Ball Peen Hammer 4 330.00 1,320.00 Material: Fiberglass Handle & Steel Head Size : 16 Ounce Weight: 3.7 Pound Pieces Cutting Mat 6 550.00 3,300.00 Flexible Cutting Mat A2 Size (24 X 18 Inch) Self-healing 5 Layered Double Sided With Marked Pattern And Grids (green) Material: Polyvinyl Chloride Color: Green Item Dimensions: 15 X 15 X 15 Centimeters Shape: Hexagonal Weight: 200 Grams Pieces Soft Box With Stand 2 1,147.41 2,294.82 Pieces Monolights 2 2,875.40 5,750.80 Pieces Reflector With Holder 2 3,800.00 7,600.00 Pieces Boom Light Stand And Reflector Holder 1 4,654.93 4,654.93 Piece Display Panel Board 1 11,909.70 11,909.70 Pieces Offline Mini Compressor 1 5,489.00 5,489.00 220v 60hz, Type: Single Cylinder Piston Compressor With Air Tank, Power: 1/6hp, Speed: 1700r.p.m, Air Output Per Min/lit.:20-23l/min, Auto Stop, Start At 3bar (43 Psi) Stop At 4bar (57psi), Working Pressure:0-4 Bar, Air Tank:3.0l, Suitable For Airbrush With Nozzle 0.2mm-1.0mm, Weight: 5kg, Dimension: 31x13x31cm Piece Styrofoam Cutter 10 204.40 2,044.02 Material:plastic, Size:approx. 190x90mm, Power: 2xc Size Battery (not Included), Feature: Electric Wire Needle Shap, Stainless Steel Wire, Hardness And Diameter Of 0.19mm Piece Weather-proof Safety Box Circuit Breaker 1 1,862.68 1,862.68 Metal Enclosure Panel Box, Weatherproof, Height:300mm, Depth:150mm, Door: 0.8mm, Body: 0.8mm, Plate: 0.8mm, Metal Body,width:400mm Pieces Fire Blanket 4 638.00 2,552.00 120x99x4cm (l X W X H) Woven Glass Fiber Pieces Exhaust Fan 5 968.00 4,840.00 Size: 12" 9" 6" Rpm: 1350, 1320, 1290 Finish: Power Coated Pieces Disposal Bins Large 2 1,652.20 3,304.40 50 Cubic Movable Bins Pieces Portable Welding Machine 1 8,500.00 8,500.00 Piece Dressmaking Shears 4 500.00 2,000.00 Pieces Reading Stand 3 2,055.22 6,165.67 Piece Plasma Display 1 10,000.00 10,000.00 Set Fire Extinguiser 12 4,000.00 48,000.00 10lb Piece Track Pad 1 650.00 650.00 Bottle Bottled Water For Dispenser Gallon 8 268.75 2,150.00 Piece Garbage Bin 13 376.92307 4,900.00 Piece Facetowels 42 95.45 4,008.90 Pair Slippers 21 119.05 2,500.00 Set Of 6 Drinking Glasses 23 798.26 18,360.00 Pieces Scissors Large 25 169.10 4,227.50 Pieces Glue (big) 30 110.60 3,318.00 Piece Wash Rags 25 142.00 3,550.00 Piece Scotch Tape 10 130 1,300.00 Set Of 6 Tea Cups With Saucer And Teaspoon 22 395.94 8,710.70 Set Mirror 1 9,740.50 9,740.50 Aluminum Frame (thickness 1/4 Inch X 4 X 8 Ft) Piece Gym Mirror 2 12,000.00 24,000.00 Aluminum Frame (thickness 1/2 Inch X 4 X 8 Ft) Piece Home Gallery Tornado Mop And Spin Dry Bucket Set 11 704.431818 7,748.75 Piece Pillows 15 397.33 5,960.00 Pillow Shape: Rectangle Pillow Weight: 0.95-1000 Grams Pillow Height: 12.7cm Pillow Width: 40.64cm Pillow Length: 66.04cm Pillow Size: 40 X 66 Cm Pillow Material: 100% Cotton Pillow Filing: Cotton Poly-fiber Pieces Chef’s Knife 3 1,639.00 4,917.00 Stainless Steel Chef Chopping Knife Household Kitchen Knife Size: 8 Inches Blade Material: 3cr14 High Carbon Stainless Steel Blade Handle: Pom Handle Pieces Boning Knife 2 1,177.00 2,354.00 6″ Boning Knife Chef’s Edge Handles Are Ergonomically Designed To Minimize Wrist Tension And Provide A Natural Fit. Heat Treatment Process Makes The Knives Extremely Sharp And Corrosion Resistance. Country Of Origin: Germany Blade Material: 3cr14 High Carbon Stainless Steel Blade Handle: Pom Handle Pieces Oysters Knife 2 203.50 407.00 Material: Stainless Blade, Plastic Handle Size: 16 Cm Easily Pry Open Oyster/clam Shells Sharp, Beveled Blade Pieces Cleaver Knife 2 660.00 1,320.00 Butcher Cleaver Knife With Ergonomic Design Highly Corrosion Resistant Stainless Steel Wooden Handle Handle Length Measures 5" Blade Length Measures 8" Long And 3.5" Wide Dishwasher-safe Blade Material: Stainless Steel Color: Stainless Steel Handle Material: Wood Blade Edge: Plain Pieces Tenderizer (pin Tenderizer) 2 286.00 572.00 Stainless-steel Prongs Break Down Tough Meat Fibers. Also Useful For Piercing Meats Before Marinating. Heavy-duty Spring-loaded Mechanism Controls Action Precisely. A Practical Solution For Turning A Tough Cut Of Meat Into A Delicious, Tender Piece Of Meat. Type: Meat Tenderizer Material: Stainless-steel, Abs Size: 5cm X 5.1cm X 19.4cm/1.97" X 2.01" X 7.64" (approx.) Pieces Tenderizer (mallet Tenderizer) 4 715.00 2,860.00 Material: Aluminum Weight:100g Size: Length: 19.5cm; Hammer: 4.5 * 4.5cm Integrated Aluminum Construction For Strength And Durability. There Are Two Sides. Use The Spiked Surface To Tenderize And The Flat Surface To Pound Meat. Ideal For Beef, Veal, Pork And Chicken, Etc. Package Content: 1x Two Side Meat Hammer Pieces Skimmer, Fine 4 62.70 250.80 6"x5"length Width 5" Handle: Length11 5/8 Material: Nickel-plated Stainless Steel Handle Material: Nickel Plated Pieces Wire Skimmer, Small 4 96.80 387.20 3" Diameter X 1"depth 13.75 Handle Length Material: Stainless Steel, Bamboo Handle Pieces Skimmers, Spider 2 1,705.00 3,410.00 Mesh Basket Tool(5inches) Material:18/8 Stainless Steel, Style Stainless Steel Mesh, Asian, Color: Silver Pieces Strainer, Small, Fine 4 132.00 528.00 Material: Stainless Steel Diameter: Approx. 8.5cm / 3.35 Inch Total Length: Approx. 22cm / 8.66 Inch Handle Length: Approx. 11.2cm / 4.41 Inch Color: Silver/golden/copper Plating (optional) Package Includes: 1 Piece Fine Mesh Stainless Steel Cocktail Strainer Pieces Colander Strainer 4 165.00 660.00 Type: Colanders & Strainers Item Type: Pearl Milk Tea Colander Material: 100% Food Grade Stainless Steel Temperature: -40f To +446f (-40c To +230c) Multiple Use Kitchen Gadgets: Kitchen Helper Feature: Made Of Premium Stainless Steel, No Toxic Chemicals, Lead Free, Pvc Free. The Versatile Design Will Fit Nearly All-round Pots, Pans And Bowls. Uses: For Hot Pot Eating, Soup Draining And Pearl Food Holding. Pieces Siever,small 4 440.00 1,760.00 Stainless Steel Fine Mesh Strainer Material: Stainless Steel; Diameter: 12 Inches; Depth: 2 Inches To 2.5 Inches; Fine Mesh:0.025mm To 0.5mm; Pieces Strainer,medium Fine 8 182.60 1,460.80 Strainer Type: Easy-grip Colander Medium:stainless Steel:item Dimensions:lxwxh: 8x4x0.2 Inches Pieces Turner, 3” X 6” 4 286.00 1,144.00 Item Dimension: L40.1 Cm X W9.6 Cm X H13.4 Cm Item Weight: 0.3 Kg Material: 18/10 Stainless Steel Tool Head & High Impact Nsf Approved Polypropylene Textured Handles (pro-gourmet) Lightweight & Easy To Hold Accommodates Right- And Left-handed Users Use & Care Easy To Clean And Dishwasher Safe. Pieces Spatula 4 264.00 1,056.00 Stainless Steel Teppanyaki Spatula L 14.8cmxw11.8cmxh 2cm Pieces Wooden Spoon 8 143.00 1,144.00 Material: Beech Wood Color: Wood Color Size: 26.3cm X 6.3cm Pieces Parisienne Scoop 8 60.50 484.00 Stainless Steel Baller Heads - 22mm Diameter And 25mm Diameter. Head Include Small Air Hole For Easy Release. Non-slip Handle Made From Fibrox - Tpe Plastic Able To Withstand Temperatures Of Up To 80°c - 110°c. Dishwasher Safe. Pieces Zester 8 220.00 1,760.00 Durable And Rust Resistant Stainless Steel Material Five Sharp Zester Holes That Quickly And Easily Zest Lemons, Oranges, And Other Citrus Fruits Built-in Channel Knife That Peels Citrus Fruits To Make Beautiful Garnishing Easy To Grip Stainless Steel Handle For Steady Control When Testing With A Built-in Hole For Easy And Proper Storage Easy To Clean And Dishwasher Safe Dimensions: L16.3 X W2.4 X H16.3 Cm Sets Piping Bag 4 352.00 1,408.00 Size: Small: About 26cm Long, About 15cm Wide At The Opening, Medium: About 30cm Long, About 17cm Wide At The Opening, Large: About 34cm Long, About 21cm Wide At The Opening. Material: Silica Gel Package: 6 * Small Connectors 2 * 12-inch Bags 2 * 14-inch Bags 2 * 16-inch Bags Pieces Pastry Tubes 8 85.80 686.40 8pcs/set Stainless Steel Pastry Piping Nozzles Size: Approx. 30cmx17.5cm; Material: Eva And 430 Stainless Steel Pieces Strainer Chinois,small 1 3,478.20 3,478.20 Commercial Grade Quality China Cap Strainer With Pot Ring Hang Hook Coarse Mesh - 10" Handle, 8" Diameter, 8" Deep", 18" Total Length Material:18/8 Stainless Steel Color:silver Item Dimensions: Lxwxh 17.13 X 8 X 7.75 Inches Item Weight:0.71 Lbs Pieces Filling Funnel 4 165.00 660.00 Material:304 Stainless Steel Size Dimension:14x11cm Pieces Measuring Spoon 6 165.00 990.00 Material: Stainless Steel , Weight:110g Size:1/8 Tsp-length: 4.25″,diameter: 0.59″ 1/4 Tsp-length: 4.33″,diameter: 0.71″ 1/2 Tsp-length: 4.45″,diameter: 0.91″ 1 Tsp-length: 4.60″,diameter: 1.10″ 1/2 Tbsp-length: 4.72″,diameter: 1.26″ 1 Tbsp-length: 4.92″,diameter: 1.57 Pieces Tongs, 9 Inches 10 53.90 539.00 Material: 304 Stainless Steel With Silicone Handle; Size:9 Inches; Feature: Ring Pull Locking System, Scalloped Heads Pieces Tongs, 12 Inches 5 165.00 825.00 Material: 304 Stainless Steel With Silicone Handle; Size:12 Inches; Feature: Ring Pull Locking System, Scalloped Heads Set Measuring Cup 1 253.00 253.00 Material: 304 Stainless Steel; Feature: 4cups/set. 100ml, 50ml, 15ml And 5ml Cup Sizes On A Storage Ring; Piece Measuring Urn 1 598.40 598.40 Specification: 500ml Colour: Silver Material: 304 Stainless Steel Pieces Ice Cream Scoop 4 154.00 616.00 Size: 18*4.2cm/18*4.8cm Color: Black/silver Material: Aluminum Alloy; Feature: Anti-freeze Ice Cream Scooper With Comfortable Handle Pieces Cheese Cloth 6 150.70 904.20 *made Of Natural Cotton, Never Been Dyed Or Bleached. It's Safe And Healthy To Use And There Is No Color Will Dye Over The Cheese, Yogurt, Turkey Or Any Other Foods. *due To Tight-weave Mesh, It Can Filter More Impurities And Work Efficiently. *it Could Be Used For Making And Wrapping Homemade Cheese. It Is Used As Greek Yogurt Or Butter, Almond Milk Or Nut Milk, Fruit Juice. Furthermore, More Impurities Will Be Filtered Out When You Filter Cold Brew Coffee Or Homemade Beer Wort, Honey And Etc. Specification: *material:cotton *color:as Show *size:100 X 120 Cm/39.3 X 49.2 In Pieces Serving Spoon 15 187.00 2,805.00 Material: 304 Stainless Steel Color: Silver Size: 24cm Set Pepper And Salt Grinder 4 110.00 440.00 Size: 5.3cm/2.09"x 19cm/7.48"; Material: Stainless Steel Case Grinder With High Quality Glass Container Unit Weighing Scale, 5 Kgs 2 1,661.00 3,322.00 Type:hanging Scale Origin:cn(origin) Size:18.5*14*1.9cm Rated Load:other Display Type:lcd Digital Screen Power Supply:3*aaa Battery(not Included) Certification:ce Model Number:electric Scale Capacity:10kg/1g,3kg/5kg/0.1g Is Smart Device:no Color:black Unit:g, Lb, Oz Measuring Range:10kg/10g, 3kg/5kg/1g Material:new Abs Engineering Plastic + Stainless Steel Backlight:yes Ftion 1:kitchen Scales Ftion 2:jewelry Scales Ftion 3:electronic Scales Ftion 4:electronic Balance Pieces Core Seed Remover 8 72.60 580.80 Effortlessly Remove Cores From Fruit Simply Push The Stem Into The Core Of The Apple And Twist To Remove Ultra Stainless Steel Coring Blade Twist And Slide Body For Easy Core Removal Length: Approx. 180mm / 7inch Diameter Of The Core: Approx. 2cm / 0.8 Inch Material: 304 Stainless Steel Pieces Wire Whisk,small 8 185.90 1,487.20 Material: Stainless Steel; Size: H01-8 Inch:21*5cm; Pieces Wire Whisk, Medium 8 220.00 1,760.00 Material: Stainless Steel; Size: H02-10 Inch:26*6cm; Pieces Wire Whisk, Heavy Duty 2 220.00 440.00 Material: Stainless Steel; Size: H03-12 Inch:29*6cm Piece Can Opener 1 121.00 121.00 Material: Stainless Steel + Pp Plastic Size: 19.5cm X 7.5cm Color: Silver + Black Features: 1. 100%brand New And High Quality 2. Ergonomic, Non-slip Grip, Comfortable And Safe In Operation. 3. High-quality Stainless Steel Material, Won't Break Or Bend, Corrosion Resistant, Smooth Felling And High Durability. 4. Rotating Handle And Precision Gears, Efficient And Labor Saving, Children, Adults And The Elderly Can Easily Work With. 5. It Combines 3 Functions In One Unit. This Versatile Can Opener Is Designed For Opening A Can Lid, Opening A Bottle Cap, Levering Or Loosening A Can Lid. 6. Easily Pierce And Open Various Types Of Cans, Like Tin Can, Oil Can, Milk Can, Cat Dog Food Can, Metal Can, Beer Can, Small Can, Large Can, Water Bottle, Jar Etc 7. High Quality Food-grade Material - The Sharp Cutting Disc Is Made Of Food-grade Material Especially The Metal Tooth Is Made Of Stainless Steel, Please Rest Assured Use. 8. No Dangerous Sharp Edges - Protect Yourself And Your Family With This Tin Opener That Leaves Edges Completely Smooth. Safely And Easily Opens Big And Small Cans In All Shapes And Sizes In Seconds. 9. Comfortable And Convenient For Storage - The Opener's Soft, Anti-slip Handles Are Easy To Grip - Which Is Especially Handy For Senior Citizens. You Can Store It In A Drawer Or Simply Hang It On A Hook In Your Kitchen. Pieces Multi-purpose Kitchen Scissors/shears 5 326.70 1,633.50 Material: Stainless Steel Size: 21 X 9 Cm; Features: Extra Sharp For Cutting Meat, Poultry Or Fish With Cracking And Bottle Opening Function Pieces Soup Ladle, 4 Oz 8 71.50 572.00 Material: 18/10 Stainless Steel With Hole On Handle Serving. Size: Length 34cm*diameter 7.5cm Pieces Soup Ladle, 6 Oz 8 71.50 572.00 Material: 18/10 Stainless Steel With Hole On Handle Capacity: 6 0z; Handle Length:3 Inches; Size: Length 34cm*diameter 9.5cm Pieces Soup Ladle, 8 Oz 3 1,210.00 3,630.00 Color: Stainless Steel Material: Stainless Steel Style: 8 Oz Ladle Item Dimension Lxwxh: 14.6 X 2.5 X 3.9 Pieces Soup Ladle, 12 Oz 2 1,210.00 2,420.00 Soup Ladle Food Grade Rust-proof Stainless Steel Dishwasher Safe Hot Pot Soup Ladle Length: 18 Width: 4.6 Height: 2 Freezer Safe: Yes Type: Gravy / Sauce Ladles Dishwasher Safe: Yes Microwave Safe: No Capacity: 10.0-14.9oz Feature: Heavy Duty Pieces Kitchen Spoon 8 220.00 1,760.00 Mirror Finished Durable Stainless Steel Material Dishwasher Safe Ss Dinner Spoon 4.0mm Thickness Length: 21cm Weight: 73gm Pieces Kitchen Spoon, Slotted 5 660.00 3,300.00 Stainless Steel Slotted Spoon Is Ideal For Stirring And Straining Pasta Or Vegetables. The Soft, Non-slip Handle Cushions Your Hand During Use, And The Polished Stainless Steel Is Both Sleek And Durable. Dimensions: 2 X 2.75 X 12.4 Weight: 0.29 Pieces Kitchen Fork 2 1,650.00 3,300.00 Color: Silver Substance: 18/10 Stainless Steel Surface Finishing: Matt/polished Net Weight: 0.11 Kg Length: 33.40 Cm Width: 2.50 Cm Height: 1.90 Cm Handle Length: 12.50 Cm Pieces Carving Fork 2 1,320.00 2,640.00 Package Dimensions: 13.07 X 1.42 X 0.87 Inches (33.2 X 3.6 X 2.2 Cm) Item Weight: 5.6 Ounces (158.76 Grams) Handle Material: Stainless, Stainless Steel, Abs, Plastic, Steel Pieces Digital Kitchen Thermometer 3 127.60 382.80 Digital Kitchen Food Thermometer For Meat Cooking Water Milk Food Probe Temperature Temperature Range: -50°c To 300°c Or -58°f To 572°f Resolution: 0.1°c Or 0.1°f Accuracy: ± 1°c Or ± 1 °f Optional Temperature Unit: °c / °f Material: 304 Stainless Steel & Abs Plastic Buttons: On/off, °c/°f, Hold Power Supply: 1 X 1.5v Lr44/ag13 Battery (not Included) Power Saving: Auto Power Off After 10 Minutes Total Length: 24.6cm Probe Length: 14.5cm Set Multi-function Vegetable Fruit Peeler Slicer Cutter Chopper 2 290.40 580.80 Stainless Steel Multifunction Fruit And Vegetable Peeler Slicer Shedder Peeler 5 Different Inserts With 11 Different Ways To Cut Cut Into Cubes Or Sticks In 3 Different Sizes Slices In 2 Different Thicknesses Cut In To Quarters, Eighths And Wedges Long- Lasting Super- Sharp Stainless Steel Blades Extra Sharp Grater Mandolin Slicer With Safety Food Holder 1 X Cutting Top With Integrated Stylus 1 X Cutting Base 1 X Transparent Collecting Container (capacity 1,500 Ml) 1 X Fresh Cover For Collecting Container 1 X Knife Insert (6 Mm X 6 Mm Or 12 Mm X 12 Mm) 1 X Knife Insert For Quarter Or Eighth 1 X Planer Insert With Blade Protection 1 X Food Holder With Guide 1 X Detachable Cutting Punch For Eighth 1 X Part Cover For All Knife Inserts Pieces Stock Pot (big) 2 6,270.00 12,540.00 Stainless Steel Large Stock Pots Casserole Stew Pan Type: Soup & Stock Pots Material: Metal Type: Stainless Steel Feature: Eco-friendly Applicable Stove: General Use For Gas And Induction Cooker Product Name: Soup Pot Usage: Soup, Milk, Noodle Pot, Cooking Pots Shape: Straight Material Type: Stainless Steel Diameter: 25 / 30 / 35/ 40 /45/ 50 Cm Pieces Frying Pan, Small 4 990.00 3,960.00 Frying A Single Egg, Sausages, Seafood, Poultry, Burgers Or Vegetables, Toasting Pine Nuts Or Even Toasting Off Some Spices. Specification: Pot Diameter: 13cm Pot Height: 2.8cm Full Length Of Pot Body: 25cm Pot Bottom Diameter: 11.5cm Included: 1 X Mini Saucepan 12cm Small Nonstick Frying Pan For Household Fried Egg Pancakes Round Mini Saucepan Pieces Frying Pan, Medium 4 385.00 1,540.00 Material: 304 Stainless Steel Size Diameter: 32cm Feature: New Technology Experience, New Design Suitable For: General Use For Gas And Induction Cooker Product Features: 1.13.4 Inch Stir Fry Pan Made Of Stainless Steel, Nonstick Cookware Interior Is Honeycomb Texture, Achieve Separation State Nonstick. Pieces Frying Pan, Large 2 1,980.00 3,960.00 Material: Carbon Steel Wok Handle: 12cm Wood (beechwood) Diameter: 36cm Depth: 10.5cm Handle Socket: Welded Non-stick Pan, Perfect For Your Daily Home Cooking Pieces Colander, Small 3 132.00 396.00 Ergonomic Design, Smooth Handle Grip. Top Hanging Ring Design, Free To Hang Up. Specification: Material: Stainless Steel Size: 32 * 10cm / 12.60 * 3.94" Color: As Shown Package Included: 1pc * Colander Pieces Colander, Medium 2 220.00 440.00 Features And Usage: Good Quality Stainless Steel Material With Competitive Price Can Be Used For Strain Soup, Juice, Milk, Tea, And Other Liquids. Strong, Sturdy, And Durable. Made For Heavy Work. Rust, Crack, And Stain Resistant Easy To Clean And Carry High, The Goods Quality Support With Your Demand. The Long Handles Protect Your Hands From Hot Grease And Oils While Letting You Cook Your Favorite Foods Product Name: Stainless Kitchen Wire Skimmer/strainer/colander Material: Stainless Steel Size / Capacity: 22cm Color: Silver Shape, Round Type: Strainer Item Number: 22cm F/h Skimmer Pieces Cutting Board 4 165.00 660.00 Packing: 1 X 1pcs Chopping Board Material: Bamboo Wood + Stainless Steel Color: Brown, Light Brown (random) Size: 34cmx 1.7cm X 24cm Design: Arc Corners Features: Made Of High-quality Bamboo Anti-mildew And Germ Proofing 100% Brand New And High Quality Easy To Clean And Very Affordable The Whole Bamboo Panel Has A Clear Bamboo Pattern. The Curved Design Of The Handle Makes It Easy To Hang. Thick, Extremely Durable, The Smooth Surface Also Prevents Your Knives From Dulling Too Quickly. Piece Fish Poacher, Medium 1 2,860.00 2,860.00 Stainless Steel Fish Streamer For Big Fish, Big Cooking Pot With Complete Accessories Pan Material: Stainless Steel Thickness: 0.7mm (+0.3mm) Dimensions (l X W X D): 18" X 5" X 6" (±0.5") Handle Material: Stainless Steel; With Two Side Handles Includes A Lid With Handle And A Perforated Rack Insert Dishwasher Safe Pieces Casserole, Small 4 313.50 1,254.00 Aluminum Casserole High Quality Aluminum Durable Handles & Knobs Size #14 (25cm Diameter, 15cm Height) Color: Aluminum Size: 35cm*28cm*20cm Weight: 0.7kg Pieces Casserole, Medium 3 1,980.00 5,940.00 Heavy Gauge Aluminum Forged Base For Extreme Strength And Wrap Prevention Durable 3 Layer Blue Diamond Non-stick Coating Coating Lasts Longer Than Any Other Pan Works On All Stovetops: Induction, Gas, Electric, Ceramic, Etc. Heat Resistant Riveted Bakelite Handle And Knob Tempered Glass Lid Heats Up Quickly And Evenly Ideal For Healthy Cooking Easy-to-clean And Dishwasher Safe Pieces Wok, Small 4 1,100.00 4,400.00 Material: Wok Is Made With Carbon Steel With Wooden Handle Available Size: 34cm Diameter Double Handle Suitable For Gas Stove And Induction Cooker Good Thermal Conductance For Even Cooking Of Vegetables And Meat Piece Wok, Medium 1 9,460.00 9,460.00 Features And Usage: Whether Stir-frying Veggies Eggs Meats Or More This Wok Distributes Heat Evenly And Wipes Clean When You’re Finished Riveted Acacia Wood Handles Make Flipping And Releasing Food Easy And Will Add A Touch Of Elegance To Your Kitchen Perfect For Veteran Chefs Or Others Simply Looking To Expand Their Culinary Palette This Wok Serves Up Delicious Results With Effortless Performance Color: Black Size: 14” Material: Carbon Steel Wok Non-stick Surface Healthier Cooking Piece Double Boiler, Medium 1 1,977.80 1,977.80 Specialty Pan Type: Egg Poacher/boiler Cookware Material: Stainless Steel Cookware Capacity: 1.1l - 2l Cookware Diameter (cm): 22 Model: Db22. Cookware Features: Includes Lid, Dishwasher Safe, Induction Safe, Helper Handle, Pfoa Free, Eco Friendly, Cover Included What’s In The Box: 1 X Double Boiler 22cm Pieces Paellera 5 1,760.00 8,800.00 Product Details: Made With Top Grade Carbon Steel, These Pans Conduct Heat Quickly And Evenly Throughout To Create The Perfect Paella. It’s Thin And Lightweight Material Makes This Pan Durable And Trustworthy. It’s Innovative Hammered Dimple Technology Makes The Bottoms Of The Pans Rigid And Perfect For Cooking Paellas Package Dimensions: 15.24 X 13.62 X 2.05 Inches (38.7 X 34.6 X 5.2 Cm) Item Weight: 2 Pounds (0.9 Kg) Material: Carbon Steel Item Diameter: 13 Inches (33 Cm) Color: Silver Capacity: 468 Cubic Inches (1188.7 Cm) Pieces Glass Rack 2 627.00 1,254.00 Description: Product Category: Wine Glass Rack Color: Black Height: 5.5 Cm Width: 22.5 Cm3 5 Rows: 50cm In Length, Can Hold 10-15 Weight: 0.55kg For 5 Rows Application: 4cm- 9cm In Base Diameter, Less Than 3cm In Column Diameter, 10cm In Belly Diameter Of Glass. Material: Iron Product List:1* Wine Glass Pieces Soup Cup Rack 4 3,080.00 12,320.00 Material: Plastic Color: Grey Shape: Square Length: 19.75" In Width: 19.75" In Height: 4" In Size: Compartment 4.375"l X 4.375"w X 4.25" Temperature Range: Up To 200°f Features: Dishwasher Safe Pieces Plate Rack 2 770.00 1,540.00 Specification: Color: White, Green Material: Stainless Steel Dimension: W X L X H (25cm X 50cm X 43.5cm) Features: Stainless Steel Material, No Rusting, Long Lasting Durability. Saves Tons Of Space And Time By Making It Easier To Access Utensils And Supplies, Making Your Kitchen More Clean And Tidy. Dish Placement Area (16 Dishes) Cutting Board Placement Area (5cm/1.97in) Tool Placement Area: 3 Spaced Grids Hanging Spoon Placement Area: 4 Storage Hooks Bowl Placement Area: More Than 12 Bowls Removable Drain Board Pieces Baking Tray, Small 8 165.00 1,320.00 1pc Small Rectangular Baking Tray Measurement: 8x12 8x 12 Outside, 6.5x10 Inside Color: Black Made Of Carbon Steel Durable And Good Quality This Can Be Fit To Small Oven Pieces Utility Tray, Stainless 8 1,430.00 11,440.00 Stainless Steel Food Measurement: 9" Length X 6.75" Width X 1" Height. Material: Stainless Steel. Pieces Roasting Pan 2 1,430.00 2,860.00 Material: Stainless Steel Color: Silver Size: 42*32*7cm Features: Easy To Clean Up. Big Enough For Whole Chicken Or Turkey. Very Convenient To Serve With Rack. Package Included: 1 X Pan (with A Rack) Pack Dishtowels 5 385.00 1,925.00 Material: Cotton/linen Blend With High Absorption Capacity. Color: Square Stripe/gray Beige Length: 70 Cm (28 ") Width: 50 Cm (20 ") Package Quantity: 2 Pieces Set Plastic “silverware” Or Real Silverware 1 3,410.00 3,410.00 Package Dimensions: 9.92 X 6.57 X 3.23 Inches (25.2 X 16.7 X 8.2 Cm) Item Weight: 7 Pounds (3.15 Kg) Material: Stainless Steel Finish Type: Polished Color: Silver Is Stain Resistant: Yes Is Dishwasher Safe: Yes Number Of Pieces: 60 Set Small Plate/saucers 4 484.00 1,936.00 Piece Cabinet Dish Organizer 1 1,978.90 1,978.90 Piece Sink 1 5,819.00 5,819.00 Pieces Sponge And Soap Holder For Kitchen Sink 3 297.00 891.00 Set Pots/pans 1 6,270.00 6,270.00 Set Cooking Utensils 1 3,630.00 3,630.00 Set Rotary Egg Beater 2 121.00 242.00 Piece Scraper 3 104.50 313.50 Piece Drawers 1 11,000.00 11,000.00 Piece Cupboards 1 11,000.00 11,000.00 Piece Brush 3 66.00 198.00 Piece Kitchen Scale 2 165.00 330.00 Pieces Kitchen Shears 2 330.00 660.00 Multifunction Comfortable Handle Kitchen Scissors Heavy Duty Food Shears For Chicken Meat, Vegetable Fish Heb, Poultry Stainless Steel Cooking Scissors Material:30cr13 Stainless Steel Highly Antagonistic And Very Sharp- Soft And Hard Double Plastic Handle Double-edged Blade Non-slip, Stable Removable Rivet Design Flexible Application, Easy To Clean Package Included:1 X Stainless Steel Kitchen Shears Color: Black + Silver Weight: 145g Size: 227 X 78 Mm Piece Potato Masher 2 288.59 577.17 Multifunctional Stainless Steel Potato Masher For Fruit, Vegetable Baby Food Supplement Mashed Potato Tool Selected Materials, Safe And Durable. Strong And Not Easy To Rust. Ergonomic Design, Easy To Use And Save Effort. Suitable For A Variety Of Foods. Material: 304 Stainless Steel 4mm Thickness One-piece Molding Size: 7 Cm X 7 Cm X 13.6 Cm Color: Silver Sets Graters 2 286.00 572.00 Product Name: Tabletop Drum Grater High Quality: The 3 Different Rotary Ultra-sharp Cylinders Slicer Made Of Food Grade Stainless Steel. All Pieces Are Detachable For Easy To Clean, Dishwasher Safe Universal Fit: Rotary Drum Grater Is Great For Cheese, Vegetables, Potatoes, Coleslaw, Nuts, Hash Browns, Onions And More With This Hand-powered Rotary Grater Cooking Choice: Rotary Cheese Grater Package Includes 3 Different Interchangeable Rotary Ultra-sharp Cylinders Drums For Different Cooking Choice Features: The Drum Shredder With Suction Base Ensures Solid Grip And Stability On Flat Surface; Simple Hand Crank Turns Drum Creates Perfectly Grated Ingredients Type: Graters Use: Home Kitchen Material: Metal, Stainless Steel & Abs Plastic Blades: 3 Stainless Steel Feature: Kitchen Creative Tools Function: Shred A Wide Variety Of Fruit And Vegetables, As Well As Cheeses Accessories: Chopping / Mixing Blade, Shredding Disc, Slicing Disc Color: Green Size: 26 X 11.5 X 24 Cm Weight: 674g Piece Funnels 2 280.00 560.00 Stainless Steel Piston Funnel With Holder For Cream Sauce Dosing Funnel For Sauce Style: Silver Material: Stainless Steel Size: Shelf Height Is About 17cm, Handheld Funnel Height Is 20cm Piece Can Opener 5 340.00 1,700.00 Chef’s Classic Multi Can Opener Features: Durable And Easy To Clean. Material: Designed With High-grade Stainless Steel Size: 18/8 Stainless Steel Ergonomic Stainless-steel Handles Hygienic Design Ensures Easy Cleaning Of All Surfaces Piece Cast Iron Pots And Pans 1 8,250.00 8,250.00 Pots And Pans Set Cast Iron Cookware Non-stick Wok Pan 316 Stainless Steel Household Frying Pan With Gas-fired Induction Cooker Diameter: 28cm Metal Type: Stainless Steel Wok Type: Non-coating Pans Type: Chef’s Pans Material: Stainless Steel Type: Pans Pot Cover Type: Glass Cover Capacity: 4-5l Applicable Stove: General Use For Gas And Induction Cooker Feature: Eco-friendly Pot Cover: Glass Cover Pot Cover: Glass Cover Product Categories: Wok Application Of The Stove: General-purpose Material:316 Stainless Steel Characteristics: Non-stick Pan Item:316 Xue Ping Guo The Bottom Of A Pan Material: Composite Multi-layer Base Packaging: Carton The Lid Type: The Glass Cover Product Quality Grade: Accepts Style: European Piece Double Broiler Steamer 1 2,475.00 2,475.00 2 Layer Stainless Steel Steamer Pot Large Capacity Soup Pot With Double Boilers Stockpot Cookware Cooking Tools Feature: Eco-friendly Model Number: Stainless Steel Thicken 2 Layer Steamer Pot Layers: Double Type: Double Boilers Sheet Size: 28cm Material: Stainless Steel Specification: Name: Steamer Pot Material: Stainless Steel Size: Thickened Double Steamer Pot-28cm/11.02inch Packing List: Steamer Pot*1 Piece Food Thermometer 1 3,540.00 3,540.00 Weight: 80 G Dimensions: 218 X 34 X 20 Mm Operating Temperature: -20 To +50 °c Product-/housing Material: Abs Protection Class: Ip67 With Topsafe Product Colour: White Length Probe Shaft: 55 Mm Length Probe Shaft Tip: 17 Mm Diameter Probe Shaft: 3 Mm Diameter Probe Shaft Tip: 2.3 Mm Standards: En 13485 Battery Type: 3v Button Cell (cr 2032) Battery Life: 350 H Display Type: Lcd (liquid Crystal Display) Display Size: One-line Display Lighting: No Storage Temperature: -40 To +70 °c Temperature – Ntc Measuring Range: -50 To +275 °c Accuracy: ±1 % Of Mv (+100 To +275 °c) ±0.5 °c (-30 To +99.9 °c) ±1.0 °c (-50 To -30.1 °c) Resolution: 0.1 °c Reaction Time: T₉₉ = 10 S (measured In Moving Liquid) Measuring Rate: 0.5 S Piece Kitchen Knife Set 2 220.00 440.00 8 Pieces Kitchen Knife Set Chef Knives Fruit Stainless Steel Knife Sharpener Rod Peller Scissors Pairing Tools Specifications: Item Name: Kitchen Knife Set Main Material: 3cr13 Stainless Steel Quantity: 8pcs Note: Please Kindly Note That There Could Be A Few Deviations As The Result Of Manual Measurement. Thank You Package Information: Package Size: 31 * 28 * 2.5cm / 12.3 * 11.2 * 0.98in Package Weight: 700g Package List: 2 * Chef Knife 1 * Chopping Knife 1 * Knife Sharpener 2 * Fruit Knife 1 * Scissors 1 * Peeler Piece Meat Slicer 1 2,090.00 2,090.00 Description: Meat Slicer Material: The Frozen Meat Slicer Is Made Of High-quality Stainless Steel, Which Is Easy To Clean And Has A Long Service Life. It Helps To Cut Frozen Meat Into Various Uses, Including Making Hot Pot, Sukiyaki, Pizza Toppings, Sandwiches Or Ginger. It Can Effectively Avoid The Vibration And Noise Of The Electric Tool During The Working Process, It Is Simple To Operate And Easy To Clean. The Thickness Of The Meat Can Be Adjusted From 0.3mm To 8mm, Just Turn The Knob Slightly. Handle And Suction Cup: Even If There Is Oil On The Hand, It Will Not Slide. The Rubber Suction Cup At The Bottom Is More Suitable For Flat Desktops, And Ceramic Tiles, Glass And Metal Desktops Are Easier To Hold. Specification: Handle Length: 43.5/17.10inch Size (l X W): About 33x17cm / 12.96x6.69inch Blade Length: About 20cm Material: Stainless Steel Package Includes: 1x Vegetable Cutting Machine Piece Cookie Press 1 561.00 561.00 Decorative Tool Use, Press The Front End Of The Handle Button, Use The Above Operating Rod, The Extrusion Is Under Your Control. Features: 100% High Quality Type: Cookie Machine Material: Aluminum Alloy, Abs Plastic Size: Diameter:5.5cm,height:21cm Included: 1 X Cookie Machine 20 X Design Discs 4 X Icing Tips Set Cake Decorating 2 110.00 220.00 Color: Pink / Blue / White / Green Material: Silicone & Stainless Steel Cake Nozzle Size: Approx.1.8cm X 3.3cm Pastry Bag Size (length):approx.32cm X 17.5cm Material: Lfgb Food Grade Eva Material Purpose: Diy Necessary Utensils For Cake Cream Package Included: 24 X Cake Nozzles 1 X Pastry Bag 1 X Plastic Piping Converter Pieces Serving Tray 5 1,100.00 5,500.00 Rectangular Serving Tray/ Multi-purpose Utility Tray Non-skid Feature: Non-slip Material Heat Resistance Space Saving Wide Application Fine Workmanship Piece Steel Multipurpose Basket 1 3,689.00 3,689.00 Piece Weighing Scale 3 715.00 2,145.00 Manual Weighing Scale; 10kg.,stainless Small Bowl, Heavy Duty Set Measuring Cups Set 7 1,128.91 7,902.40 7 Pieces With A Convenient 1/8 Coffee Scoop; Complete Set Of 7with Pouring Lip, Sizes Include 1/8, 1/4, 1/3, 1/2, 2/3, 3/4 And 1 Cup, Food Grade Material Of Stainless Steel, Dishwasher Safe, Set Measuring Spoons 14 164.92 2,308.90 Sizes: 1/8tsp (0.63ml),1/4tsp (1.25ml),1/2tsp (2.5ml), 1 Tsp(5ml), 1/2tbsp (7.5ml),1 Tbsp (15ml), High Quality Stainless Steel, Dishwasher Safe Piece Measuring Urn 7 352.00 2,464.00 Glass,capacity: 100 Ml. (with 10 Ml Increments),metric And English System Of Measurement; With Handle And Spout, Clear, Non-porous, Tempered Glass Piece Mixing Bowl 11 251.90 2,770.90 Capacity:2.5l,high Quality,durable, Stain And Rust Resistant, Stainless Steel,diameter 22cm Piece Baking Sheet 25 211.50 5,287.43 13'x18', Tray Size 46x34cm, Aluminum Piece Wire Whisk 9 207.90 1,871.10 12inch, Heavy Duty, Stainless Steel, French Wire Piece Muffin Pan 60 57.68 3,461.04 12 Cups Muffin Bun Cupcake Bakewear Mold Material:carbon Steel With Non-stick Coating, Size:l:35cm X W:26cm X H:3.0cm Large Inner 7.0cm Piece Rubber Scraper 5 38.50 192.50 Big Size Silicone Rubber Spatula/scraper, Material:plastic+silicone Rubber, Size 24cm X 5cm Piece Hand Mixer 1 2,608.60 2,608.60 5-speed Selection,175w Power Consumption, 1.7m Power Cord, Weight: 1.08g., Dimensions:9.3cm X 19.5cm X 15.1cm, 220-240v Piece Revolving Cake Stand 3 600.00 1,800.00 Total: 2,631,530.02 2. Deped-division Of Sultan Kudarat, Through Its Bids And Awards Committee (bac), Now Invites Bids For The Above-mentioned Procurement Project. Prospective Bidders Must Have An Experience Of Having Completed At Least One (1) Contract That Is Similar To The Contract To Be Bid. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships/partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interests Or Outstanding Capital Stocks Belonging To Citizens Of The Philippines. 5. A Complete Set Of Bidding Documents May Be Acquired Or Purchased At Deped-division Of Sultan Kudarat Bac Secretariat, Located At National Hi-way Brgy, Kenram, Isulan, Sultan Kudarat Upon Accomplishing A Bidder’s Information Sheet And Payment In Cash Of A Non-refundable Fee By Interested Bidders In The Amount Of Five Thousand Pesos (php5,000.00) Per Lot To The Division Cashier. Only Bidders Who Purchased The Bidding Documents Will Be Allowed To Submit Bids (itb 6.8). It May Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Www.philgeps.net, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped- Division Of Sultan Kudarat Will Be Having The Following Procurement-related Activities. Activity Date & Time Venue Issuance Of Bidding Documents November 13–december 03, 2024 Division Office, National High-way,brgy Kenram, Isulan, Sul. Kudarat Pre-bid Conference November 21, 2024 (10:00 Am) Division Kalimudan Hall, Brgy. Kenram, Isulan Sultan Kudarat Submission And Opening Of Bids December 03, 2024 (10:00 Am) Division Kalimudan Hall, Brgy. Kenram, Isulan Sultan Kudarat 7. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website: Www.philgeps.net, For Them To Be Included In The Document Request List Of The Project. 8. Bids Must Be Delivered To The Address And On The Date And Time Stated Herein. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. A Valid Bid Securing Declaration Must Accompany The Bid(s) In Lieu Of The Bid Security. 9. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Opening Of Bids At The Address Stated Herein. Late Bids Shall Not Be Accepted. 10. Deped Division Of Sultan Kudarat Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Not Award The Contract(s), Or Annul The Bidding Process Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Melvin P. Fortuna Chairperson, Bac Secretariat Department Of Education Region Xii Division Of Sultan Kudarat Kenram,isulan, Sultan Kudarat Tel/fax # 064-471-1007 Meilrose B. Peralta, Edd Assistant Schools Division Superintendent Bac Chairperson

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Sticker "caution: Getting On and Off After the Departure Signal Is Prohibited", Dimensions: 9x21cm, (photo in the Attachment) - 40 pcs., External Stickers, Resistant to Weather Conditions, Resistant to Abrasion, Protected with High-Quality Foil (glossy), Durability At Least 5 Years The Above-mentioned Assortment Must Meet the Following Requirements: Be New and Free from Defects, Original 1. Offer Evaluation Criterion: Price 100% Ii. Conditions of Order Execution: 1. Deadline for Execution: 20 Working Days; 2. Execution Hours – 8:00 – 14:00; 3. Principles of Delivery and Unloading of Goods: In accordance with the Owd; 4. Place of Delivery: Koleje Wielkopolskie Sp. Z Oo, Ul. Kolejowa (rolling stock maintenance hall) 66-210 Zbąszynek, Rolling Stock Maintenance Point Zbąszynek The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Delivery Date of the Goods, Including the Delivery Time. 5. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading, 6. Payment Deadline: In accordance with the T&Cs: (payment deadline 30 Days from Invoice Issue) The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is Obliged to prepare it in PDF format. In the case of issuing an Electronic Invoice, the Seller is Obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. In the case of issuing invoices in paper form, the Contractor is Obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the case of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 7. Warranty Terms: In accordance with the Owd; 8. Deadline for Removing Defects Under Warranty: In accordance with the Owd; 9. Contractual Penalties – In accordance with § 7 of the Owd. At the same time, the Ordering Party informs that the total value of contractual penalties cannot exceed 20% of the remuneration. Iii. Course of the procedure: the Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the execution of the Order by placing information on the Purchasing Platform about the selection of the most advantageous offer. The order is awarded at the moment referred to in the previous sentence. The Ordering Party is entitled to withdraw from the award of the order at any time. Iv. Contractor's declarations: The Ordering Party informs that participation in the subject procedure is equivalent to submitting the following declarations: 1. I declare that I have fulfilled the information obligations provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained personal data in order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended) and Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z O. O. Available On The Ordering Party's Website Https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/, Including the Provisions of § 3 Sec. 7 of the General Conditions of Supply of Koleje Wielkopolskie Sp. Z O.o. Information Clause Under Art. 13 of the GDPR - Has Been Posted On The Eb2b Purchasing Platform In The "Information Obligation" Tab. Contact Person On The Ordering Party's Side - Monika Kruszwicka 667 313 233 Please Send Any Questions Regarding The Proceeding Through The Purchasing Platform. Technical Assistance Can Be Obtained At The Telephone Number Located In The Footer At The Bottom Of The Page. "The Contractor is excluded from the Proceeding On The Basis Of The Premises Indicated In § 7 Sec. 1 Points 1-4, 6 Of The Regulations." Pursuant to Art. 7 Para. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134, 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No 269/2014 Of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (OJ EU L 78, 17.03.2014, p. 6, As Amended; Hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act. Based on Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia’s actions destabilising the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended; hereinafter referred to as “Regulation 833/2014”), the following Contractors are excluded from this Public Procurement Procedure: 1) A Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body whose ownership rights are directly or indirectly more than 50% owned by Russian citizens or individuals residing in Russia or legal persons, entities or bodies with their registered office in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in Item 1) or 2) of this Section, and using subcontractors, suppliers or entities on whose capabilities it relies (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the order.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - right fairing Fig.215m120100-1-01 For Sa108 - 1 piece (photo attached) 2. above-mentioned The Assortment Must Meet The Following Requirements: Be New And Free From Defects, Original, Not Encumbered With Third Party Rights, 3. Accompanying Documentation: With Delivery Required Declaration 2.1 Laying down Detailed Regulations Concerning the Certification System of Entities in Charge of Vehicle Maintenance in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. Z 2019 139 As amended, hereinafter "Regulation 2019/779"), the Employer as the Entity Responsible for Vehicle Maintenance within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety ( Recast version) (Journal of Laws of the European Union, L. Z 2016, No. 138, p. 102, as amended), Considering the Impact of the correct execution of the Contract on Railway Traffic Safety, requires that the Subject of the Contract be implemented by Contractors with An appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). To confirm that the subject of the Order will be implemented by Contractors with an appropriate and documented maintenance and management system, it is necessary to submit a statement referred to in Chapter IV, Item 4. 5. Tender Evaluation Criterion: Price 99%, 1% Completion Date Ii. Terms of Order Execution: 1. Execution date - Order Execution date expected by the Ordering Party 7 Business Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for Delivery and Unloading of Goods - According to the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o. o. Ul. Zacisze 1, 64-100 Leszno, Leszno Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Delivery Method: One-Time Delivery, The Price Should Include The Cost Of Delivery And Unloading. 5. Payment date - According to the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of electronic invoices by the Seller, in accordance with Art. 931, as amended; hereinafter referred to as "the VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTD; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTC; 8. Contractual penalties - Pursuant to § 7 of the GTD. iii. course of the Proceedings: The Contracting Authority informs that the Proceedings are conducted in two stages: A) Stage I - Bidding, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I It will last 15 minutes and Extra Time - Sub-stage of Stage II, which The terms and conditions are described in detail in the Procurement Platform's Proceedings Setting. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically asked to leave the Further Stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Contracting Authority informs that participation in the Proceedings is tantamount to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations provided for in Art. In order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation ) (OJ L 119 Z 04/05/2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be implemented by Contractors who have an appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) Annex Ii to the Commission Implementing Regulation (eu) 2019/779 of 16 May 2019 laying down detailed provisions on the system of certification of entities in charge of vehicle maintenance in accordance with the Directive of the European Parliament and of the Council (eu) 2016/798 and repealing the Commission Regulation ( ue) No. 445/2011 (Journal of Laws of the UE L. Z 2019, p. 139, as amended) V. Additional information: Proceedings conducted in accordance with the provisions of § 25 of the Regulations for Awarding Sub-Threshold Contracts, Available to Contractors at The Ordering Party's website https://koleje-wielkopolskie.com.pl/. Due to the impact of the execution of the Order on the Safety of Transport, within the Proceedings, the provisions of § 5 Sec. 2 and § 22 of the Regulations. in the Proceedings, the General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O. o. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. including the provisions of § 3 Sec. 7 of the General Delivery Terms of Koleje Wielkopolskie Sp. z o.o. Information clause Z Art. 13 of the GDPR - Was posted on the Eb2b Purchasing Platform in the "Information obligation" tab. Please direct any Questions Regarding the Proceedings via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (hereinafter the Sanctions Act), the Contractor is excluded from this Public Procurement Procedure: 1) listed in the Specified Lists In Council Regulation (EC) No. 765/2006 of 18 May 2006 concerning restrictive measures in view of the situation in Belarus (Journal of Laws of the European Union L 134 Z 20.05.2006, p. 1, As amended; hereinafter Regulation 765/2006) and Council Regulation (EU) No. 269/2014 of 17 March 2014 on restrictive measures with regard to actions undermining or threatening the territorial integrity, sovereignty and independence of Ukraine (OJ L 78 of 17.03 2014, p. 6, as amended, hereinafter Regulation 269/2014) or entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Article 1(3) of the Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593 and 655) is the person listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the list or being such a real beneficiary from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Article 1(3) of the Sanctions Act ; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 Item 37 of the Act of September 29, 1994 on Accounting (Journal of Laws of 2021, items 217, 2105 and 2106), is an entity listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on Listed or Being such a Parent Company since February 24, 2022, provided that it was entered on the List on the basis of a decision on entry on the List determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act. Pursuant to Art. 7 Para. 6-7 of the Sanctions Act, persons or entities subject to exclusion, joining the public procurement procedure, will be subject to a fine of up to PLN 20,000,000. The financial penalty will be imposed by the President of the Public Procurement Office by way of an administrative decision. The Exclusion Period shall begin not earlier than 14 Days after the Effective Date of the Sanctions Act.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - right fairing Fig.215m120100-1-01 For Sa108 - 1 piece (photo attached) 2. above-mentioned The Assortment Must Meet The Following Requirements: Be New And Free From Defects, Original, Not Encumbered With Third Party Rights, 3. Accompanying Documentation: With Delivery Required Declaration 2.1 Laying down Detailed Regulations Concerning the Certification System of Entities in Charge of Vehicle Maintenance in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. Z 2019 139 As amended, hereinafter "Regulation 2019/779"), the Employer as the Entity Responsible for Vehicle Maintenance within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety ( Recast version) (Journal of Laws of the European Union L. Z 2016 No. 138, p. 102 As amended), Considering the impact of the correct execution of the Contract on the safety of railway traffic, requires that the subject of the Contract be implemented by Contractors with An appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). To confirm that the subject of the Order will be implemented by Contractors with an appropriate and documented maintenance and management system, it is necessary to submit a statement referred to in Chapter IV, Item 4. 5. Tender Evaluation Criterion: Price 99%, 1% Completion Date Ii. Terms of Order Execution: 1. Execution date - Order Execution date expected by the Ordering Party 7 Working Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - According to the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o. o. Ul. Zacisze 1, 64-100 Leszno, Leszno Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Delivery Method: One-Time Delivery, The Price Should Include The Cost Of Delivery And Unloading. 5. Payment date - According to the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of Electronic Invoices by the Seller, in accordance with Art. 931, as amended; hereinafter referred to as "the VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTD; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTC; 8. Contractual penalties - Pursuant to § 7 of the GTD. iii. course of the Proceedings: The Ordering Party informs that the Proceedings are conducted in two stages: A) Stage I - Bid submission, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I It will last 15 minutes and Extra Time - Sub-stage of Stage II, which The terms and conditions are described in detail in the Procurement Platform's Proceedings Setting. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically asked to leave the Further Stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Employer informs that participation in the Procedure in question is tantamount to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations provided for in Art. In order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation ) (OJ L 119 Z 04/05/2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be implemented by Contractors who have an appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) Annex Ii to the Commission Implementing Regulation (eu) 2019/779 of 16 May 2019 laying down detailed provisions on the system of certification of entities in charge of vehicle maintenance in accordance with the Directive of the European Parliament and of the Council (eu) 2016/798 and repealing the Commission Regulation ( ue) No. 445/2011 (Journal of Laws of the EU L. Z 2019, p. 139, as amended) 5. I declare that the Contract in question will be performed by contractors not subject to exclusion under Article 5k of the Council Regulation ( ue) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1, as amended) And Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings underway Pursuant to the provisions of § 25 of the Sub-threshold Sectoral Procurement Regulations, available to Contractors on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Due to the impact of the execution of the Order on the Safety of Transport, within the Proceedings, the provisions of § 5 Sec. 2 and § 22 of the Regulations. in the Proceedings, the General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O. o. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. including the provisions of § 3 Sec. 7 of the General Delivery Terms of Koleje Wielkopolskie Sp. z o.o. Information clause Z Art. 13 of the GDPR - Was posted on the Eb2b Purchasing Platform in the "Information obligation" tab. Please direct any Questions Regarding the Proceedings via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Procedure: 1) Listed in the Council Regulation (EC) No. 765/2006 of 18 May 2006 concerning restrictive measures due to the situation in Belarus (Journal of Laws of the EU L 134 Z 20.05.2006, p. 1, as amended, hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 on restrictive measures in relation to activities undermining the integrity Territorial, Sovereignty and Independence of Ukraine or threatening them (Journal of Laws of the European Union L 78 Z 17.03.2014, p. 6, as amended; hereinafter referred to as "Regulation 269/2014") Or Entered on the List Based on the Decision on the Entry To the Determining List of the Measures referred to in Art. 1 Item 3 of the Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the list or being such a beneficial owner from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 Item 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, items 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1 As amended; hereinafter "Regulation 833/2014"), The Contractor is excluded from this Public Procurement Proceeding: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) a legal person, entity or body whose property rights directly or indirectly belong to Russian citizens or natural persons residing in Russia or legal persons, entities or bodies based in Russia in more than 50%; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this section, and using subcontractors, suppliers or entities on whose capacity (if applicable), belonging to To one of the above Categories of Entities, in the event that they account for more than 10% of the Order Value.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Leveling Valve Sv1205-gd3/110 (ii43911/03) Version E - 1 piece - Leveling Valve Sv1205-gd3/110 (ii43911/03) Version H - 1 piece - Gasket D32x4 B74370/2 - 2 pcs. - Valve plate D16x4 - 4 pcs. - Compression spring D12x25 - 4 pcs. For Sa139 2. above mentioned The Assortment Must Meet The Following Requirements: Be New And Free From Defects, Original, Not Encumbered With Third Party Rights, 3. Accompanying Documentation: None Regulations on the Certification System of Entities in Charge of Vehicle Maintenance in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. Z 2019, p. 139 Z Late Amended; hereinafter "Regulation 2019/779"), the Employer as the Entity in Charge of Vehicle Maintenance within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on Railway Safety (Recast) ( Journal of Laws of the European Union, L. Z 2016, No. 138, p. 102, as amended), Considering the impact of proper execution of the Contract on Railway Traffic Safety, requires that the subject of the Contract be implemented by Contractors with an appropriate and documented system Maintenance and Management Within the meaning of point 9.2 lit. B) of Annex Ii to Regulation 2019/779 (e.g. ISO 9001:2015, Iris). To confirm that the subject of the Order will be implemented by Contractors with an appropriate and documented maintenance and management system, it is necessary to submit a statement referred to in Chapter IV, Item 4. 5. Tender Evaluation Criterion: Price 99%, 1% Completion Date Ii. Terms of Order Execution: 1. Execution date - Order Execution date expected by the Ordering Party 7 Working Days. The Ordering Party indicates that it allows the submission of Tenders with a deadline longer than 7 Business Days. - The unit "days" defined in the Criterion of the Execution Date should be understood as Business Days - Execution Hours - 8:00 am to 2:00 pm 2. Rules for the Delivery and Unloading of Goods - According to the GTC 3. Place of Delivery: Koleje Wielkopolskie Sp. z o. o. Ul. Leśna 1d, 62-100 Wągrowiec, Wągrowiec Rolling Stock Maintenance Point. The Contractor, no later than 12 hours before commencing the execution of the order, is obliged to confirm the date of delivery of the goods, including the time of delivery. 4. Delivery Method: One-Time Delivery, The Price Should Include The Cost Of Delivery And Unloading. 5. Payment date - According to the GTD; (payment deadline 30 Days From Invoice Issue) The Buyer accepts the issuance and delivery of Electronic Invoices by the Seller, in accordance with Art. 931, as amended; hereinafter referred to as "the VAT Act"). When issuing an electronic invoice, the seller is obliged to prepare it in pdf format. In the case of issuing an electronic invoice, the Seller is obliged to deliver it to the Buyer to the following e-mail address: Faktury@koleje-wielkopolskie.com.pl. 6. Guarantee conditions - In accordance with the GTD; 7. Deadline for Removing Defects Under the Guarantee - In accordance with the GTC; 8. Contractual penalties - Pursuant to § 7 of the GTD. iii. course of the Proceedings: The Ordering Party informs that the Proceedings are conducted in two stages: A) Stage I - Bid submission, B) Stage II - Electronic Bidding - Bidding will start automatically after the end of Stage I It will last 15 minutes and Extra Time - Sub-stage of Stage II, which The terms and conditions are described in detail in the Procurement Platform's Proceedings Setting. Each Overtime Lasts 3 Minutes - Starts if Within the Last 3 Minutes of the Proceedings, Another Bid (proceeding) is submitted correctly. Contractors approved by the Employer who fail to submit a Proposal correctly at the Bid Submission Stage (and Stage) will be automatically asked to leave the Further Stages of the Proceedings. The Ordering Party grants approval for the Order by placing on the Purchasing Platform Information about the Selection of the Most Advantageous Offer. With the moment referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from awarding the Order at any time. IV. Contractor's declarations: The Employer informs that participation in the Procedure in question is tantamount to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations provided for in Art. In order to apply for the award of a public contract in this procedure. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation ) (OJ L 119 Z 04/05/2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause With Art. 13 of the GDPR - Has been posted on the Eb2b Purchasing Platform in the "Information Obligation" tab. 3. I declare that the Price Offer on the Purchasing Platform was submitted by the Person Authorized to Represent the Contractor. 4. I declare that the Contract in question will be implemented by Contractors who have an appropriate and documented maintenance and management system within the meaning of point 9.2 lit. B) Annex Ii to the Commission Implementing Regulation (eu) 2019/779 of 16 May 2019 laying down detailed provisions on the system of certification of entities in charge of vehicle maintenance in accordance with the Directive of the European Parliament and of the Council (eu) 2016/798 and repealing the Commission Regulation ( ue) No. 445/2011 (Journal of Laws of the EU L. Z 2019, p. 139, as amended) 5. I declare that the Contract in question will be performed by contractors not subject to exclusion under Art. 5k of the Council Regulation ( ue) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1, as amended) And Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended) V. Additional information: Proceedings underway Pursuant to the provisions of § 25 of the Sub-threshold Sectoral Procurement Regulations, available to Contractors on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. Due to the impact of the execution of the Order on the Safety of Transport, within the Proceedings, the provisions of § 5 Sec. 2 and § 22 of the Regulations. in the Proceedings, the General Terms and Conditions of Delivery of Koleje Wielkopolskie Sp. Z O. o. Available on the Ordering Party's website https://koleje-wielkopolskie.com.pl/. including the provisions of § 3 Sec. 7 of the General Delivery Terms of Koleje Wielkopolskie Sp. z o.o. Information clause Z Art. 13 of the GDPR - Was posted on the Eb2b Purchasing Platform in the "Information obligation" tab. Please direct any Questions Regarding the Proceedings via the Purchasing Platform. Technical Support can be obtained at the telephone number in the footer at the bottom of the page. Pursuant to Art. 7 Para. 1 of the Act of April 13, 2022 on Special Solutions for Counteracting the Support of Aggression against Ukraine and for the Protection of National Security (i.e. Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), The Contractor is excluded from this Public Procurement Procedure: 1) Listed in the Council Regulation (EC) No. 765/2006 of 18 May 2006 concerning restrictive measures due to the situation in Belarus (Journal of Laws of the EU L 134 Z 20.05.2006, p. 1, as amended, hereinafter "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 on restrictive measures in relation to activities undermining the integrity Territorial, Sovereignty and Independence of Ukraine or threatening them (Journal of Laws of the European Union L 78 Z 17.03.2014, p. 6, as amended; hereinafter referred to as "Regulation 269/2014") Or Entered on the List Based on the Decision on the Entry To the Determining List of the Measures referred to in Art. 1 Item 3 of the Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Counteracting Money Laundering and Terrorist Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is the person listed in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the list or being such a beneficial owner from February 24, 2022, as long as it was entered on the list on the basis of the decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 of the Sanctions Act; 3) whose Parent Undertaking within the meaning of Art. 3 Sec. 1 Item 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, items 217, 2105 and 2106 and of 2022, item 1488), is an entity listed in the lists specified in Regulation 765/2006 I Regulation 269/2014 or entered on the list or being such a Parent Company from February 24, 2022, provided that it was entered on the list on the basis of a decision on entry on the list determining the application of the measure referred to in Art. 1 Item 3 Sanctions Act. Pursuant to Article 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU L. Z 2014 No. 229, p. 1 As amended; hereinafter "Regulation 833/2014"), The Contractor is excluded from this Public Procurement Proceeding: 1) a Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) a legal person, entity or body whose property rights directly or indirectly belong to Russian citizens or natural persons residing in Russia or legal persons, entities or bodies based in Russia in more than 50%; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in point 1) or 2) of this section, and using subcontractors, suppliers or entities on whose capacity (if applicable), belonging to To one of the above Categories of Entities, in the event that they account for more than 10% of the Order Value.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Circulation Pump U4851 | U4855 | U4856 – Pcs. 6 2. The Above-mentioned Assortment Must Meet the Following Requirements: Be New and Free from Defects, Original, Not Encumbered by the Rights of Third Parties. 3. Accompanying Documentation: A Declaration 2.1 of Conformity of the Goods Issued by Its Manufacturer Based on the PN En 10204:2006 Standard or a Quality Document Issued by Its Manufacturer Based on an Equivalent Standard (coc) is Required with the Delivery. 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning a system of certification of entities in charge of maintenance of vehicles in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (OJ EU L. 2019, p. 139, as amended; hereinafter referred to as "Regulation 2019/779"), the Contracting Authority, as the entity in charge of maintenance of vehicles within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) (OJ EU L. 2019, p. 2016 R. No. 138, Page 102, As Amended), Taking into account the impact of correct execution of the order on railway traffic safety, requires that the subject of the order be executed by contractors having an appropriate and documented maintenance and management system within the meaning of point 9.2 letter B) of annex Ii to regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation that the subject of the order will be executed by contractors having an appropriate and documented maintenance and management system is the submission of the declaration referred to in chapter iv point 4. 5. Offer evaluation criterion: 99% price, 1% completion date. Ii. Conditions of order execution: 1. Implementation date The order execution date expected by the ordering party is 7 business days. The Ordering Party Indicates That It Allows the Submission of Offers With a Deadline Longer Than 7 Business Days. - The unit of "days" specified in the Implementation Deadline criterion should be understood as Business Days. - Implementation Hours – 7:00 To 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Terms and Conditions 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Leśna 1d, 62-100 Wągrowiec, Rolling Stock Maintenance Point Wągrowiec. The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Goods Delivery Date, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Date – In Accordance with the Terms and Conditions; (Payment deadline 30 Days from Invoice Issue). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is obliged to prepare it in PDF format. - In the case of issuing an Electronic Invoice, the Seller is obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the event of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In Accordance with the General Terms and Conditions; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the General Terms and Conditions; 8. Contractual Penalties – In Accordance with § 7 of the General Terms and Conditions. At the same time, the Ordering Party informs that the total value of Contractual Penalties may not exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the selection of the most advantageous offer on the Purchasing Platform. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be carried out by Contractors having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU, 2014, No. 229, p. 1, as amended) and Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained at the Telephone Number Located in the Footer At the Bottom of the Page. The Contractor is excluded from the Proceedings On the Basis of the Premises In § 7 Sec. 1 Points 1-4, 6 of the Regulations. Based on Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act. Based on Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia’s actions destabilising the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended; hereinafter referred to as “Regulation 833/2014”), the following Contractors are excluded from this Public Procurement Procedure: 1) A Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body whose ownership rights are directly or indirectly more than 50% owned by Russian citizens or individuals residing in Russia or legal persons, entities or bodies with their registered office in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in Item 1) or 2) of this Section, and using subcontractors, suppliers or entities on whose capabilities it relies (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the order.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Insulator Flange Sleeve Nis103.00.01.1.26 – Pcs. 6 2. The Above-mentioned Assortment Must Meet the Following Requirements: Be New and Free from Defects, Original, Not Encumbered by the Rights of Third Parties. 3. Accompanying Documentation: With the Delivery, a Declaration 2.1 of Conformity of the Goods, Issued by Its Manufacturer Based on the PN En 10204:2006 Standard or a Quality Document Issued by Its Manufacturer Based on an Equivalent Standard (coc), is Required. 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning a system of certification of entities in charge of maintenance of vehicles in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (OJ EU L. 2019, p. 139, as amended; hereinafter referred to as "Regulation 2019/779"), the Contracting Authority, as the entity in charge of maintenance of vehicles within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) (OJ EU L. 2019, p. 2016 R. No. 138, Page 102, As Amended), Taking into account the impact of correct execution of the order on railway traffic safety, requires that the subject of the order be executed by contractors having an appropriate and documented maintenance and management system within the meaning of point 9.2 letter B) of annex Ii to regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation that the subject of the order will be executed by contractors having an appropriate and documented maintenance and management system is the submission of the declaration referred to in chapter iv point 4. 5. Offer evaluation criterion: 99% price, 1% completion date. Ii. Conditions of order execution: 1. Implementation date The order execution date expected by the ordering party is 7 business days. The Ordering Party Indicates That It Allows the Submission of Offers With a Deadline Longer Than 7 Business Days. - The unit of "days" specified in the Implementation Deadline criterion should be understood as Business Days. - Implementation Hours – 7:00 To 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Terms and Conditions 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Leśna 1d, 62-100 Wągrowiec, Rolling Stock Maintenance Point Wągrowiec. The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Goods Delivery Date, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Date – In Accordance with the Terms and Conditions; (Payment deadline 30 Days from Invoice Issue). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is obliged to prepare it in PDF format. - In the case of issuing an Electronic Invoice, the Seller is obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the event of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In Accordance with the General Terms and Conditions; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the General Terms and Conditions; 8. Contractual Penalties – In Accordance with § 7 of the General Terms and Conditions. At the same time, the Ordering Party informs that the total value of Contractual Penalties may not exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the selection of the most advantageous offer on the Purchasing Platform. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be carried out by Contractors having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU, 2014, No. 229, p. 1, as amended) and Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained at the Telephone Number Located in the Footer At the Bottom of the Page. The Contractor is excluded from the Proceedings On the Basis of the Premises In § 7 Sec. 1 Points 1-4, 6 of the Regulations. Based on Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act. Based on Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia’s actions destabilising the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended; hereinafter referred to as “Regulation 833/2014”), the following Contractors are excluded from this Public Procurement Procedure: 1) A Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body whose ownership rights are directly or indirectly more than 50% owned by Russian citizens or individuals residing in Russia or legal persons, entities or bodies with their registered office in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in Item 1) or 2) of this Section, and using subcontractors, suppliers or entities on whose capabilities it relies (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the order.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Cable Holder 20/20 916016020202 Mdc 20mm X Diameter 20mm Rubber Clamp - Pcs. 18 - Photo Attached 2. The Above-mentioned Assortment Must Meet the Following Requirements: Be New and Free from Defects, Original, Not Encumbered by the Rights of Third Parties. 3. Accompanying Documentation: None 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning a system of certification of entities in charge of maintenance of vehicles in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (OJ EU L. of 2019, p. 139, as amended; hereinafter referred to as "Regulation 2019/779"), the Ordering Party as the Entity in Charge of Maintenance of Vehicles within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast version) (Journal of Laws of the European Union, 2016, No. 138, Page 102, As Amended), Taking into account the impact of proper execution of the order on the safety of railway traffic, requires that the subject of the order be executed by contractors having an appropriate and documented maintenance and management system within the meaning of point 9.2 letter B) of annex Ii to regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation that the subject of the order will be executed by contractors having an appropriate and documented maintenance and management system is the submission of the declaration referred to in chapter iv, point 4. 5. Bid evaluation criterion: 99% price, 1% implementation deadline. Ii. Order Execution Conditions: 1. Execution Date The Ordering Party's expected order execution date is 7 Business Days. The Ordering Party indicates that it allows for the submission of offers with a deadline longer than 7 Business Days. - The unit of "days" specified in the execution date criterion should be understood as Business Days. - Execution hours – 7:00 to 15:00 2. Principles of Delivery and Unloading of Goods – In accordance with the OWD 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo, Kolejowa Street 23, 60-717 Poznań, Rolling Stock Maintenance Point Poznań. The Contractor is obliged to confirm the Goods Delivery Date, Including the Delivery Time, no later than 12 Hours before starting to execute the order. 4. Delivery method: One-off delivery, the price should include the cost of delivery and unloading. 5. Payment Deadline – In Accordance with the T&Cs; (payment deadline 30 days from the date of invoice issuance). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Accordance with Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is obliged to prepare it in PDF format. - In the case of issuing an Electronic Invoice, the Seller is obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the event of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In Accordance with the General Terms and Conditions; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the General Terms and Conditions; 8. Contractual Penalties – In Accordance with § 7 of the General Terms and Conditions. At the same time, the Ordering Party informs that the total value of Contractual Penalties may not exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the selection of the most advantageous offer on the Purchasing Platform. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be carried out by Contractors having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU, 2014, No. 229, p. 1, as amended) and Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained at the Telephone Number Located in the Footer At the Bottom of the Page. The Contractor is excluded from the Proceedings On the Basis of the Premises In § 7 Sec. 1 Points 1-4, 6 of the Regulations. Based on Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act. Based on Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia’s actions destabilising the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended; hereinafter referred to as “Regulation 833/2014”), the following Contractors are excluded from this Public Procurement Procedure: 1) A Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body whose ownership rights are directly or indirectly more than 50% owned by Russian citizens or individuals residing in Russia or legal persons, entities or bodies with their registered office in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in Item 1) or 2) of this Section, and using subcontractors, suppliers or entities on whose capabilities it relies (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the order.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Radio Telephone Handset Transmit Button (orange) - 20 pcs (photos attached) 2. The aforementioned assortment must meet the following requirements: be new and free from defects, original, not encumbered by the rights of third parties. 3. Accompanying documentation: A Declaration 2.1 of Conformity of the Goods, issued by its manufacturer based on the PN En 10204:2006 standard or a quality document issued by its manufacturer based on an equivalent standard (coc), is required with the delivery. 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning a system of certification of entities in charge of maintenance of vehicles in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (OJ EU L. 2019, p. 139, as amended; hereinafter referred to as "Regulation 2019/779"), the Contracting Authority, as the entity in charge of maintenance of vehicles within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) (OJ EU L. 2019, p. 2016 R. No. 138, Page 102, As Amended), Taking into account the impact of correct execution of the order on railway traffic safety, requires that the subject of the order be executed by contractors having an appropriate and documented maintenance and management system within the meaning of point 9.2 letter B) of annex Ii to regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation that the subject of the order will be executed by contractors having an appropriate and documented maintenance and management system is the submission of the declaration referred to in chapter iv point 4. 5. Offer evaluation criterion: 99% price, 1% completion date. Ii. Conditions of order execution: 1. Implementation date The order execution date expected by the ordering party is 7 business days. The Ordering Party Indicates That It Allows the Submission of Offers With a Deadline Longer Than 7 Business Days. - The Unit of "days" Specified in the Implementation Deadline Criterion Should Be Understood as Business Days. - Implementation Hours – 7:00 To 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Terms and Conditions 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Kolejowa 3, 66-210 Zbąszynek, Rolling Stock Maintenance Point Zbąszynek. The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Goods Delivery Date, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Term – In Accordance with the Terms and Conditions; (Payment deadline 30 Days from Invoice Issue). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is obliged to prepare it in PDF format. - In the case of issuing an Electronic Invoice, the Seller is obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the event of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In Accordance with the General Terms and Conditions; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the General Terms and Conditions; 8. Contractual Penalties – In Accordance with § 7 of the General Terms and Conditions. At the same time, the Ordering Party informs that the total value of Contractual Penalties may not exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the selection of the most advantageous offer on the Purchasing Platform. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be carried out by Contractors having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU, 2014, No. 229, p. 1, as amended) and Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained at the Telephone Number Located in the Footer At the Bottom of the Page. The Contractor is excluded from the Proceedings On the Basis of the Premises In § 7 Sec. 1 Points 1-4, 6 of the Regulations. Based on Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act. Based on Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia’s actions destabilising the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended; hereinafter referred to as “Regulation 833/2014”), the following Contractors are excluded from this Public Procurement Procedure: 1) A Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body whose ownership rights are directly or indirectly more than 50% owned by Russian citizens or individuals residing in Russia or legal persons, entities or bodies with their registered office in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in Item 1) or 2) of this Section, and using subcontractors, suppliers or entities on whose capabilities it relies (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the order.

Details: I. Subject of the Proceedings: 1. Description of the Subject of the Order: - Thermo 350 21319 A Heating Engine for Sa 132, Sa 134, Sa 139 - 8 pcs. - Photos attached 2. The above-mentioned assortment must meet the following requirements: be new and free from defects, original, not encumbered by the rights of third parties. 3. Accompanying documentation: - With the delivery, a Declaration 2.1 of Conformity of the Goods, issued by its Manufacturer based on the PN En 10204:2006 Standard or a Quality Document issued by its Manufacturer based on an Equivalent Standard (coc). 4. Having regard to the provisions of Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning a system of certification of entities in charge of maintenance of vehicles in accordance with Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (OJ EU L. 2019, p. 139, as amended; hereinafter referred to as "Regulation 2019/779"), the Contracting Authority, as the entity in charge of maintenance of vehicles within the meaning of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) (OJ EU L. 2019, p. 2016 R. No. 138, Page 102, As Amended), Taking into account the impact of correct execution of the order on railway traffic safety, requires that the subject of the order be executed by contractors having an appropriate and documented maintenance and management system within the meaning of point 9.2 letter B) of annex Ii to regulation 2019/779 (e.g. ISO 9001:2015, Iris). Confirmation that the subject of the order will be executed by contractors having an appropriate and documented maintenance and management system is the submission of the declaration referred to in chapter iv point 4. 5. Offer evaluation criterion: 99% price, 1% completion date. Ii. Conditions of order execution: 1. Implementation date The order execution date expected by the ordering party is 7 business days. The Ordering Party Indicates That It Allows the Submission of Offers With a Deadline Longer Than 7 Business Days. - The unit of "days" specified in the Implementation Deadline criterion should be understood as Business Days. - Implementation Hours – 7:00 To 15:00 2. Principles of Delivery and Unloading of Goods – In Accordance with the Terms and Conditions 3. Place of Delivery: - Koleje Wielkopolskie Sp. Z Oo Ul. Leśna 1d, 62-100 Wągrowiec, Rolling Stock Maintenance Point Wągrowiec. The Contractor, No Later Than 12 Hours Before Starting to Execute the Order, Is Obliged to Confirm the Goods Delivery Date, Including the Delivery Time. 4. Delivery Method: One-off Delivery, The Price Should Include the Cost of Delivery and Unloading. 5. Payment Date – In Accordance with the Terms and Conditions; (Payment deadline 30 Days from Invoice Issue). The Buyer Accepts the Issuance and Delivery of Electronic Invoices by the Seller, In Pursuant to Art. 106n of the Act of 11 March 2004 on Tax on Goods and Services (i.e. Journal of Laws of 2022, item 931, as amended; hereinafter "VAT Act"). When issuing an Electronic Invoice, the Seller is obliged to prepare it in PDF format. - In the case of issuing an Electronic Invoice, the Seller is obliged to deliver it to the Buyer to the e-mail address: Faktury@koleje-wielkopolskie.com.pl. - In the case of issuing invoices in paper form, the Contractor is obliged to deliver them exclusively to the following address: Koleje Wielkopolskie Sp. Z Oo Ul. Składowa 5, 61-897 Poznań In the event of delivering a paper invoice to a different address, the invoice may be deemed as undelivered, which may result in delays in its processing and payment. 6. Warranty Terms – In Accordance with the General Terms and Conditions; 7. Deadline for Removing Defects Under the Warranty – In Accordance with the General Terms and Conditions; 8. Contractual Penalties – In Accordance with § 7 of the General Terms and Conditions. At the same time, the Ordering Party informs that the total value of Contractual Penalties may not exceed 20% of the Remuneration. Iii. The course of the procedure: The Ordering Party informs that the procedure is conducted in two stages: A) Stage I - Submission of offers that will take part in Stage II, B) Stage II - Electronic bidding - the bidding will start automatically after the end of Stage I and will last 15 minutes, as well as the extra time - sub-stage of Stage II, the conditions of which are precisely described in the procedure settings on the Purchasing Platform. Each extra time lasts 3 minutes - it starts if another offer (bid) is submitted correctly within the last 3 minutes of the procedure. Contractors accepted by the Ordering Party, who do not submit their offer correctly at the stage of submitting offers (stage I), will be automatically asked out of the further stages of the procedure. The Ordering Party grants a confirmation of the order by placing information on the selection of the most advantageous offer on the Purchasing Platform. At the time referred to in the preceding sentence, the Order is awarded. The Ordering Party is entitled to withdraw from the Order Award at any time. Iv. Contractor's Declarations: The Ordering Party informs that participation in the subject Proceedings is equivalent to submitting the following Declarations: 1. I declare that I have fulfilled the Information Obligations Provided for in Art. 13 or Art. 14 of the GDPR*) towards Natural Persons from whom I have directly or indirectly obtained Personal Data in order to apply for the award of a public contract in this Proceeding. *Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L. 119 of 04.05.2016, p. 1). 2. I declare that I consent to the processing of my personal data provided by me voluntarily to the Ordering Party. Information Clause from Art. 13 of the GDPR - has been posted on the Eb2b Purchasing Platform in the "information obligation" tab. 3. I declare that the price offer on the Purchasing Platform was submitted by a person authorized to represent the Contractor. 4. I declare that the Subject Order will be carried out by Contractors having an Appropriate and Documented Maintenance and Management System within the meaning of Point 9.2 Letter B) of Annex Ii to Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions concerning the Certification System of Entities in Charge of Maintenance of Vehicles in Pursuance of Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No. 445/2011 (Journal of Laws of the EU L. of 2019, p. 139, as amended). 5. I declare that the Subject Order will be Performed by Contractors Not Subject to Exclusion Under Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (Journal of Laws of the EU, 2014, No. 229, p. 1, as amended) and Under Art. 7 Sec. 1 of the Act of April 13, 2022, on Specific Solutions for Counteracting Support for Aggression Against Ukraine and Serving the Protection of National Security (consolidated text: Journal of Laws of 2023, item 129, as amended) V. Additional Information: The Proceedings Are Conducted in Accordance with the Provisions of § 25 of the Regulations for the Award of Sub-threshold Sectoral Contracts, Available to Contractors on the Ordering Party's Website https://koleje-wielkopolskie.com.pl/. Due to the Impact of the Execution of the Order on Transport Safety, the Provisions of § 5 Section 2 and § 22 of the Regulations Apply to the Proceedings. The General Terms and Conditions of Supply of Koleje Wielkopolskie Sp. Z Oo Available On The Ordering Party's Website https://bip.koleje-wielkopolskie.com.pl/zamowienia-publiczne/ogolne-warunki-dostaw/ Including the provisions of § 3 Sec. 7 of the General Terms of Supply of Koleje Wielkopolskie Sp. Z Oo Information Clause Under Art. 13 of the GDPR – Has Been Posted on the Eb2b Purchasing Platform In the “information obligation” tab. Please Send Any Questions Regarding the Proceedings Through the Purchasing Platform. Technical Assistance Can Be Obtained at the Telephone Number Located in the Footer At the Bottom of the Page. The Contractor is excluded from the Proceedings On the Basis of the Premises In § 7 Sec. 1 Points 1-4, 6 of the Regulations. Based on Art. 7 Sec. 1 of the Act of 13 April 2022 on Special Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (consolidated text: Journal of Laws of 2023, item 129, as amended; hereinafter referred to as the "Sanctions Act"), the following Contractor is excluded from this Public Procurement Procedure: 1) Listed on the Lists Specified in Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures in connection with the situation in Belarus (OJ EU L 134 of 20.05.2006, p. 1, as amended; hereinafter referred to as "Regulation 765/2006") and Council Regulation (EU) No. 269/2014 of 17 March 2014 On Restrictive Measures In Respect Of Actions Undermining Or Threatening The Territorial Integrity, Sovereignty And Independence Of Ukraine (EU Official Journal L. 78 of 17 March 2014, p. 6, As Amended; hereinafter referred to as "Regulation 269/2014") Or Inscribed On The Basis Of The Decision On Inclusion On The List Of The Measure Referred To In Art. 1 Item 3 Of The Sanctions Act; 2) Whose Beneficial Owner within the meaning of the Act of 1 March 2018 on Combating Money Laundering and Terrorism Financing (Journal of Laws of 2022, items 593, 655, 835, 2180 and 2185) is a Person included in the lists specified in Regulation 765/2006 and Regulation 269/2014 or entered on the List or being such a Beneficial Owner from 24 February 2022, provided that He or she was entered on the List on the basis of the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Item 3 of the Sanctions Act; 3) Whose Parent Entity within the meaning of Art. 3 Sec. 1 Point 37 of the Act of 29 September 1994 on Accounting (Journal of Laws of 2021, item 217, 2105 and 2106 and of 2022, item 1488), is an Entity Listed on the Lists Specified in Regulation 765/2006 and Regulation 269/2014 or Entered on the List or Being Such a Parent Entity from 24 February 2022, Provided That It Has Been Entered on the List Based on the Decision on Entry on the List Determining the Application of the Measure Referred to in Art. 1 Point 3 of the Sanctions Act. Based on Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia’s actions destabilising the situation in Ukraine (OJ EU L. of 2014, No. 229, p. 1, as amended; hereinafter referred to as “Regulation 833/2014”), the following Contractors are excluded from this Public Procurement Procedure: 1) A Russian citizen, a natural person residing in Russia or a legal person, entity or body with its registered office in Russia; 2) A legal person, entity or body whose ownership rights are directly or indirectly more than 50% owned by Russian citizens or individuals residing in Russia or legal persons, entities or bodies with their registered office in Russia; 3) A natural or legal person, entity or body acting on behalf of or under the direction of the entity referred to in Item 1) or 2) of this Section, and using subcontractors, suppliers or entities on whose capabilities it relies (if applicable), belonging to one of the above categories of entities, in the event that they account for more than 10% of the value of the order.