Transport Tenders

Purchaser Name: Op Rateur De Transport De Wallonie | Description: Belgium – Special-purpose Road Passenger-transport Services – Services Réguliers Spécialisés De Transport Scolaire

Purchaser Name: Transport For Greater Manchester | Tfgm Virtual Power Purchase Agreement (vppa)

Description: Regular and occasional school and general public transport

Details: Turbine And Generator Hydroelectric Component Manufacturing And Rehabilitation Idiqthis Is A Sources Sought Only. This Sources Sought Notice Is Being Issued Solely For Information And Planning Purposes - It Does Not Constitute A Request For Quote (rfq)/invitation For Bid (ifb)/request For Proposal (rfp) Or A Promise To Issue An Rfq, Ifb Or Rfp In The Future. No Formal Solicitation For This Work Exists At This Time. All Qualified Concerns May Submit Capability Statements For Consideration. Capability Statements Received Will Be Reviewed To Determine The Technical, Administrative, And Management Capability Of Such Offerors To Perform This Type Of Work. The Capability Statements Will Be Used To Determine Appropriate Procurement Strategy, In Particular, Whether A Set-aside Or An Alternate Procurement Strategy Is Warranted. The Government Does Not Intend To Award A Contract And Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Notice. The Bureau Of Reclamation, Lower Colorado Region, Lower Colorado Dams Office (lcdo), At Hoover Dam, Davis Dam, And Parker Dam Power Plants Has A Requirement For The Repair, Remanufacture, Machining, And Rehabilitation Of Existing Hydro Power Plant Related Components. These Hydro Power Plant Components May Vary From Items Such As The Generator, Turbine, Elevators, Cranes, Water Passage Valves And Gates, Barricades, And Any Component Found In A Fully Functioning Hydroelectric Powerhouse And Dam Facility. This Idiq Includes The Following Types Of Work:manufacture Of New Componentsre-design And Reverse Engineer Replacement Components To Include:-3-dimensional Digitizing And Computer-aided Drawings Of Existing Lower Colorado Dam Hardware -repair Or Replacement Manufacture Of Existing Lower Colorado Dam Hardwarefurnish New Hydroelectric Turbine And Generator Components To Replace Existing Worn Components Including:-large Valves-valve Actuators-bearing Components-water Passage Gates-any Component That Wears Or Needs Upgradingprovide Onsite Repair And/or Machiningweld And Repair Fatigued, Worn, Or Water-damaged Hydro Turbine-generator Parts To Precision Dimensions And Tolerances Of Lower Colorado Dam Design.provide Precision Fabrication Of New Replacement Parts Per Lower Colorado Dam Design.provide Industry Standard Inspection And Testing.assembly Of Turbine-generator Parts From Newly Purchased Components Or Components Previously Purchased And Stocked At Hoover Dam.types Of Components Include, But May Not Be Limited To:-wicket Gates-stator/pole Wedge Bars-wicket Gate Bushings-wear Plates-engineered Fasteners-retaining Bolts-break-off Screws-large Diameter Valves, Valve Bodies, And Leaves-large Diameter Coupling Studs And Nuts-thrust Bearing Components-bearing Brackets-shift Rings-laminations-insulation-other Generator & Turbine Componentsin Addition, For Components Too Large To Transport For Repair, The Contractor Shall Also Provide Onsite Repair/machining. Repair/machining Work Performed Onsite Shall Be Subject To Construction Wage Rate Requirements Statute Prevailing Wage Rates. For Any On-site Work, The Task Orders Will Identify The Need For A Site Specific Safety Plan, Job Hazard Analysis, Hazmat And Special Work Permit, And Security Clearances. Each Year, Hoover Dam Performs A Major Maintenance Overhaul Teardown On One Of Its 17 Hydro Turbine-generator Units. There Are Nominal Dimensional And Configuration Variations Among The Turbine-generators, But The Basic Design Layout, Assortment Of Parts And Teardown Procedures Are Consistent Throughout.the Anticipated North American Industry Classification System Code Is 333611, Turbine And Turbine Generator Set Units Manufacturing, With A Small Business Size Standard Of 1,500 In Number Of Employees. Product Service Code J028 Maintenance, Repair, And Rebuilding Of Equipment- Engines, Turbines, And Components.the Basic Contract Is Anticipated As An Indefinite-delivery/indefinite-quantity (idiq) Contracts. The Ordering Period Is Anticipated At 5 Years. In Accordance With Far 36.204, Disclosure Of Magnitude Of Construction Projects, The Estimated Prices Are Between $25,000 And $100,000;between $100,000 And $250,000;between $250,000 And $500,000;between $500,000 And $1,000,000;between $1,000,000 And $5,000,000; Andbetween $5,000,000 And $10,000,000.the Idiq Maximum Is More Than $10,000,000.the Capabilities Package Should Include The Following Information: 1. Provide Business Name, Duns Number, Address, Point Of Contact To Include E-mail Address, Telephone Number And Website If Applicable;2. Business Size And Type (small Business, Women Owned Small Business, Hubzone, Service-disabled Veteran Owned Small Business, Indian Small Business Economic Enterprise, Other);3. Demonstrate The Firm's Capability And Experience By Providing A List Of Projects Completed Where The Work Involved Similar Contracts In The Past Five Years, And In Which Your Firm Performed The Work. Additionally, For Each Project Listed, Provide The Following: A Brief Description Of The Work Performed, Project Title, Dollar Value Of The Job, Prime/subcontractor, Location, And The Customer's Contact Name And Phone Number For The Work Completed. (not To Exceed 5 Pages)4. Bonding Capacity Per Contract/action;all Responses Must Be Submitted Via Email No Later Than 5:00 Pm Eastern Time February 28, 2025. Email Address: Mwatanga@usbr.gov. Include The Reference Number (doirfbo250010) In The Subject Line.when It Is Determined That A Formal Solicitation Will Be Issued, The Pre-solicitation Notice Will Be Posted On Contract Opportunities At Sam.gov Web Site At Http://sam.gov/.

Description: Delivery of three transport sets for transporting materials, machines and equipment for the needs of Południowy Koncern Węglowy Sa – Zakład Górniczy Sobieski”.

Purchaser Name: Ministry Of Land Infrastructure And Transport | About 1,044,000l(fuel Oil A)

Details: T24/25-013 Supply Of Vehicle Spare Parts.-lisburn And Castlereagh City Council (lccc) Require A Supplier Of Vehicle Spare Parts For Its Vehicle Repair Facility, Parts To Be Supplied Are For Council Vehicles Which Are Now Outside The Warranty Period. Firms Can Bid For One Or More Lots. Parts To Be Supplied Will Range From (i) Small To Large Vans, (ii) Road Sweepers To (iii) Refuse Collection Vehicles That Are 7.5, 18 Or 26 Ton In Weight. Vehicle Parts Being Tendered Must Be From Recognised Manufacturers Within The Freight/transport Sector. All Parts Should Conform To Whole Vehicle Type Approval (wvta). All Vehicle Components Must Conform To Type Approval Documentation By Achieving Conformity Of Production (cop) Certification. All Electrical And Vehicle Parts Are Required To Have Ce/en Mark Under The Machinery Directive. All Parts Supplied Must Conform To Original Equipment Manufacturer (oem) Specifications.

Description: Germany – Transport Services (excl. Waste Transport) – Durchführung Von Fahrdienstleistungen Mit Medizinischer Und Administrativer Assistenz Im Rahmen Des Ärztlichen Bereitschaftsdienstes Der Kv Sachsen Im Freistaat Sachsen

Details: Title: Fourniture, Installation Et Mise En Service D’un Transformateur Élévateur Pour Le Parc Éolien De La Montagne De Buttes description: Le Présent Marché Concerne La Conception, La Construction, Les Essais En Usine, Le Transport, Les Essais Sur Site Et La Mise En Service D’un Transformateur Élévateur De Puissance De 100 Mva Onaf De Tension Nominale Réglable De 33 Kv Au Primaire Et 125 Kv Au Secondaire

Details: Title: Furnizarea A 6 Microbuze Electrice În Cadrul Proiectului „dotarea Cu Microbuze Electrice A Unităților Școlare Din Mediul Rural, Județul Vaslui” description: În Cadrul Acestui Contract Vor Fi Achiziționate Un Număr De 6 De Microbuze Electrice. Fiecare Microbuz Electric Trebuie Sa Fie Dotat Cu O Capacitate De 16 Locuri Pe Scaune Din Care 1 Loc Pentru Persoane Cu Dizabilități + 1 Loc Pentru Conducătorul Auto. Uat Județul Vaslui Implementează, Contractul De Finanțare Pentru Proiectul „dotarea Cu Microbuze Electrice A Unităților Școlare Din Mediul Rural, Județul Vaslui” Cod P_13 În Cadrul Apelului ,,microbuze Electrice Pentru Elevi, Prin Pnrr/pilonul Vi. Politici Pentru Noua Generație/componenta C15: Educație/reforma 6: Actualizarea Cadrului Legislativ Pentru A Asigura Standarde Ecologice De Proiectare, Construcție Și Dotare În Sistemul De Învățământ Preuniversitar/investiția 10: Dezvoltarea Rețelei De Școli Verzi Și Achiziționarea De Microbuze Verzi. Obiectivul General Al Proiectului Îl Reprezintă Îmbunătățirea Condițiilor De Transport Școlar Pentru Elevii Din 6 De Comune Ale Județului Vaslui Prin Achiziționarea De Microbuze Școlare Electrice, Facilitând Accesul Copiilor/tinerilor La Educație Și Protejarea Mediului Înconjurător În Același Timp. Investiția Vizată Va Contribui Pe Termen Scurt Și Mediu La Îmbunătățirea Condițiilor De Transport Pentru Elevii Din 6 De Comune Ale Județului Și Pe Termen Lung La Protejarea Mediului Înconjurător. Microbuzele Electrice Școlare Se Vor Livra La Sediul Beneficiarului Sau La O Altă Locație În Municipiul Vaslui, Menționată La Momentul Contractării, În Termenul De 3 Luni De La Semnarea Contractului De Furnizare. Notă: Orice Referire În Documentele Achiziției Care Indică O Anumită Origine, Sursă, Producție, Producător, Un Procedeu Special, Un Standard, Un Normativ, O Marcă De Fabrică Sau De Comerț, Un Brevet De Invenție, O Licență De Fabricație, Sunt Menționate Doar Cu Scopul De A Identifica Cu Ușurință Tipurile De Produs Ca Și Concept Și Nu Au Ca Efect Favorizarea Sau Eliminarea Anumitor Operatori Economici Sau A Anumitor Produse/servicii Sau Lucrări. Aceste Specificații Vor Fi Considerate Ca Având Mențiunea De „sau Echivalent”, Iar Ofertantul Are Obligația De A Demonstra Echivalența Produselor/serviciilor/lucrărilor Ofertate Cu Cele Solicitate, Dacă Este Cazul. Nota: Termenul Pana La Care Orice Operator Economic Interesat Are Dreptul De A Solicita Clarificari Sau Informatii Suplimentare In Legatura Cu Documentatia De Atribuire Este De 19 Zile Inainte De Data Limita De Depunere A Ofertelor. Autoritatea Contractanta Va Raspunde In Mod Clar Si Complet Tuturor Solicitarilor De Clarificari In A 11-a Zi Înainte De Termenul Stabilit Pentru Depunerea Ofertelor. Nota: Solicitările De Clarificări Referitoare La Prezenta Documentaţie De Atribuire Se Vor Adresa În Mod Exclusiv În Seap La Secţiunea „întrebări" Din Cadrul Procedurii De Atribuire Derulate Prin Mijloace Electronice, Iar Răspunsurile La Acestea Vor Fi Publicate În Seap La Sectiunea „detalii Procedura - Clarificari, Decizii La Documentatia De Atribuire” Din Cadrul Anuntului De Participare, Autoritatea Contractantă Urmând Să Nu Dea Curs Solicitărilor Adresate Prin Altă Modalitate De Comunicare Decât Cea Stabilită.