Tondo Medical Center Tender

Description Department Of Health Tondo Medical Center Iso 9001:2015 Certified Philhealth Accredited “health Care Within Your Reach” Name Of The Procuring Entity: Tondo Medical Center Name Of The Project: Procurement Of Various Dental Equipment Location Of The Project: Tondo Medical Center Balut, Tondo Manila Svp No.: Np – Svp – 24 – 061 _______________________ Name Of Company ________________________ Address Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions, Stating The Shortest Time Of Delivery. Overbid Price Will Automatically Be Rejected During The Opening Of Bids. Submit Your Quotation Duly Signed By Your Representative At The Procurement Section Or Email Us At Procurement@tmc.doh.gov.ph Not Later Than 16 April 2024, 10:00am. Ryan E. Cabance, Md, Fpso-hns Chairman Bids And Awards Committee Note: 1. Delivery Period Is Within Sixty (60) Days Upon Receipt Of Approved Notice To Proceed (ntp). 2. Price Validity Shall Be For A Period Of __30__ Calendar Days; 3. Bidders Are Entitled To One (1) Bid Only, Otherwise, All Bids Made Shall Be Automatically Be Rejected; Attachments: 1. Price Quotation, Inclusive Of Taxes; 2. Duly Accomplished And Signed Technical Specifications Using The Attached Form 3. Duly Accomplished And Signed Price Schedule Using The Attached Form; 4. Philgeps Organization Number Or Updated Philgeps Certificate Should Your Company Be Declared As The Lowest/single Calculated Bidder (l/scb), Submit The Following Within Five (5) Calendar Days From The Receipt Of Post-qualification Letter: 1. Current Mayor’s Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located; 2. Sec Or Dti Certification; 3. Bir Certificate; 4. Latest Income/business Tax Return; 5. Notarized Omnibus Sworn Statement, With Special Power Of Attorney Or Secretary’s Certificate, Whichever Is Applicable 6. Original Brochures Or Downloaded Version From The Manufacturer’s Official / Current Working Website For The Item To Be Bided With Name And Address Of The Manufacturer; 7. Product Demonstration / Brochure Technical Specifications Republic Of The Philippines Department Of Health Technical Specification Item No 1. Dental Air Compressor Qty 2 Units Name Of Manufacturer: Country Of Origin: Brand: Model: Abc: Php. 120,000.00 Purchase's Specification Supplier's Specifications Dental Air Compressor • 2hp • Power: 1600w • Volt/hz: 110-240v 50-60hz • Speed: 1400/1750 R.p.m. • Air Flow: 310l/min At Obar • Noise Level: 53db • Max Pressure: 8 Bar • Tank Capacity: 60l • Weight: 51/63kg • Product Size: 700*400*720*mm(l*w*h*) • 6 Month Warranty On Motor Only • With 1 Year Warranty On Parts • Lifetime Service Warranty In The Store * Bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. * For Additional Specification/s, Kindly State It In The Supplier’s Specification Column _____________________________ _____________________________ Name Of Company Address _______________________________ ______________________________ Signature Over Printed Name Telephone / Fax No. (duly Authorized To Sign The Bid) Technical Specifications Republic Of The Philippines Department Of Health Technical Specification Item No 2. Ultrasonic Scaler (handpiece) Qty 2 Units Name Of Manufacturer: Country Of Origin: Brand: Model: Abc: Php. 27,600.00 Purchase's Specification Supplier's Specifications Ultrasonic Scaler (handpiece) • With 1 Year Warranty On Parts Lifetime Service Physical Damage Technical Parameters: • Rated Input: 220vac 50hz/110vac 60hz • Input Power: 38va • Size: 180mm*180*150* • Weight Of Main Unit: 1.59kg • Fuse Of Main Unit: To.5al 250v • Primary Tip Vibration Excursion<200µm • Tip Vibration Frequency: 28khz± • Output Power Of Tip: 3w-20w • Half-excursion Force: 0.5n – 5n • Water Entrance Pressure: 0.01mpa – 0.5mpa • Handpiece : (with Led Lamp, Detachable) • Function Setting: G.p.e. • Touch Control: Yes • Water Bottle: Included * Bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. * For Additional Specification/s, Kindly State It In The Supplier’s Specification Column _____________________________ _____________________________ Name Of Company Address _______________________________ ______________________________ Signature Over Printed Name Telephone / Fax No. (duly Authorized To Sign The Bid) Technical Specifications Republic Of The Philippines Department Of Health Technical Specification Item No 3. High Speed Handpiece ,straight Qty 7 Units Name Of Manufacturer: Country Of Origin: Brand: Model: Abc: Php. 74,900.00 Purchase's Specification Supplier's Specifications High Speed Handpiece ,straight Standard Non Optic • Description: Wrench Type, Standard Head 2 Holes • Max. Speed : 450 (rpm-rotation Per Minute) Single Spray • Stainless Steel Body Clean Head System (push Button Type) • Ceramic Bearrings • Single Spray • Air Pressure Regulating Valve • Push Button Chuck (except Wrench Type) • 6 Months Warranty Except Bearing • Lifetime Service Warranty * Bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. * For Additional Specification/s, Kindly State It In The Supplier’s Specification Column _____________________________ _____________________________ Name Of Company Address _______________________________ ______________________________ Signature Over Printed Name Telephone / Fax No. (duly Authorized To Sign The Bid) Technical Specifications Republic Of The Philippines Department Of Health Technical Specification Item No 4. High Speed Handpiece, Angled/45- Degree Qty 2 Units Name Of Manufacturer: Country Of Origin: Brand: Model: Abc: Php. 21,400.00 Purchase's Specification Supplier's Specifications High Speed Handpiece, Angled/45- Degree • Standard Non Optic Single Spray • Description: Wrench Type, Standard Head 2 Holes • Max. Speed : 450 (rpm-rotation Per Minute) Single Spray • Stainless Steel Body • Ceramic Bearrings • Clean Head System (push Button Type) • Push Button Chuck (except Wrench Type) • Air Pressure Regulating Valve(except Qd Type) • 6 Months Warranty Except Bearing • Lifetime Service Warranty * Bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. * For Additional Specification/s, Kindly State It In The Supplier’s Specification Column _____________________________ _____________________________ Name Of Company Address _______________________________ ______________________________ Signature Over Printed Name Telephone / Fax No. (duly Authorized To Sign The Bid) Price Schedule Procurement Of Various Dental Equipment Np-svp-24-061 Item No. Item Description Qty. Unit Unit Cost Total Cost Total Amount • All Price Offered (unit Price And Total Bid Price) Must Be Typed Or Written Legibly In Indelible Ink. After Having Carefully Read And Accepted Your Conditions, I / We Quote You On The Item/s At Prices Noted Above. ______________________________ _____________________________ Name Of Company Address ________________________________ ______________________________ Signature Over Printed Name Telephone / Fax No. (duly Authorized To Sign The Bid) Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]