Tenders of Tepl Rna Esk Bud Jovice, A S

Hot water management Rudolfovská Tř. - Steam Pipe Conversion

Optimization of Hot Water Line 2x Dn 300

Szt - Systematic Transition From Steam To Hot Water - Part of Rožnov

Delivery of 2 pcs of Control Solenoid Valves According to the Following Parameters: 1x Control Valve in Welding Design, Dn 200/400, Pn 160/40; Steam Regulation Parameters 95/8 Bar, 530/200°c, Further See the Calculation Sheet in the Appendix; Cooling Water Inlet by the Cone Axis of the Control Valve; Drive Schiebel Rab8 Am30 + L100 (f10), 3x400 V, 50 Hz; Other Parameters See the Calculation Sheet in the Appendix; 1x Cooling Water Control Valve, Flanged, Dn 50, Pn 40; Parameters of Inlet Water 35 Bar, 150°c, Other See the Calculation Sheet in the Appendix; Drive Schiebel Rab3 Am5 + L50, 3x400 V, 50 Hz; Other Parameters See the Calculation Sheet in the Appendix;

Hot Water Supply Location Svetlíky - Hall "b" Incl. Vs

The subject of this Order is the General Repair of the R24 Switchboard located in the R 1.1 Switchboard in the Production Block +/- 0.00m in the Teplárna České Budějovice As. Testing, Measuring And Reviewing. In the switchboard, individual cable outlets will be marked with new labels, labels will also be fitted on the other ends of the outlets, fuse elements will be marked, and on the doors there will be single-pole diagrams of individual fields with a list of fuse elements, due to easy finding of a fault/defect and easy orientation in the switchboard. All work will be carried out in accordance with valid standards of the Czech Republic, En, Pne, Laws, Decrees and Regulations. All Materials and Work Necessary to Successfully Handover the Functional Part to the Customer Will Be Included. Openings in Structural Elements of Buildings Through which Lines Pass, E.g. In Floors, Walls, Ceilings, Partitions, Etc. They must be sealed with fire barriers after the installation of the lines so that the required fire resistance of this building element is not reduced. The repair will take place according to the fulfillment date below. The inlets and outlets to the cabinet are routed from below. Part of the repair is also the disposal of the generated waste. The Scope of the Offer Will Include Tangible and Intangible Fulfillment and Services Necessary for the Successful Implementation of the Work. Ensure ecological disposal of dismantled material. If it becomes necessary to supply additional materials, works or services to achieve the completeness, operability, required parameters of the work and to ensure its smooth, reliable and safe operation and the purpose of its use, then the contractor will supply or carry out additional supplies of materials, works or services, even though they are not explicitly Listed In This Agreement, At Your Own Cost. The Price Offer Will List The Dimensions And The Manufacturer Of The Switchboard, The Manufacturer Of The Fuses And Control Elements And The Terminal Blocks Used. The general repair will be carried out according to the developed implementation documentation.

The subject of this event is the supply and installation of a power pump, according to the general technical specifications and required parameters below. The basis for the processing of the offer is the project documentation for the selection of the contractor/implementation documentation prepared by the company Invelt Servis, Sro Z 02/2024, which is attached to this document. • Dismantling of the existing En3 feed pump • Delivery and installation of a new pump of approx. 80 T/h with location at the original location (base) En3 • Keeping the pump bypass through the feed tank • Connection to the existing feed headers • Mar addition with the necessary connections to Rš included Adjustments of the Necessary Visualizations • Assessment and Possible Proposal for Modification of the Power Supply / Outlet (including the Power Equipment in the Supply Switchboard) • Supply of Armatures Including Shut-off Fittings on the Collection Side • Heating of the Water Dispenser Including Heating of the Outlet Pipe • Description (draft) of Operating States O Normal Operation O Power Pump In Warm Backup And Ready In Selected Standby O Cold Start O Start When Pressure And Temperature Parameters At The Inlet Are Not Met (Pump Start With Awareness Of Failure To Observe The Recommended Inlet Parameters – Temporary Blockage Of Protection) O Shut Down In Cold Backup • Commissioning, Necessary Tests, Documentation Etc.

The subject of the Contract is: A) Production of Individual Parts of the Reduction Station According to the Drawing Documentation; B) Installation of Individual Parts of the Reduction Station and the Armatures Delivered by the Customer in Position within the Specified Time and Incl. Protective coatings and thermal insulation; C) Performing the Prescribed Tests Before Putting into Trial Operation. The Work Also Includes: – Transporting the Parts of the Reduction Station to the Place Designated by the Customer for Completion, Testing and Commissioning; – Obtaining And Delivering All Certificates Of Quality, Material Testing, Completeness, Necessary Audit Reports And Protocols

The subject of this event is the delivery of a set of construction objects and operational files for the construction of a road scale for trucks recording the quantity (weight) of imported wood chips to the Teplárny České Budějovice, As site. This scale will cooperate with the existing road scale located at the Tčb. The operation on the balance and the immediate surroundings will be recorded by an overview camera connected to the operator's control room, which will be built in the Chuv building in the room of the current laboratory. Further Necessary Description of the Scope of the Work Is Specified in the Tender Documentation. It is necessary to coordinate with the contractor of the K12 Boiler Retrofit Work Procedure. The Main Construction, Technical and Technological Components of the Construction Are: • Road Scale, • Rain Sewage, • Electrical Installation, • Control and Management System Required Parameters of Road Scales: • Quantity 1 Set • Weighing Capacity 60 T • Dimensions Approx (L X W XV) 18 X 3 X 1.1 M • Built-up Area/Building Volume 54m2/60m3 Technical Requirements: • The Scale Will Be Delivered As Commercial (established scale) and Will Be Officially Certified • The Construction Is Of A Permanent Character With An Expected Lifetime For The Period Of Operation Of Tčb Other Requirements: • Accompanying Documentation Road Scales • Project and Production Documentation of the Contractor • Transport to the Place of Fulfillment According to Article No. I Calls • Continuity and Compatibility with the Existing Control System • More Details See Tour of Places of Fulfillment See Below • Workplace Equipment • Warranty Period for Equipment Supplies We Require Min. 24 months and more at the discretion of the applicant • Warranty period for construction and assembly work We require Min. 48 Months or more at the Bidder's discretion • More See Tender Documentation Processed by Spol. Ti Centrum, As Z 12/2023