Survey Tenders

Details: ***february 6, 2024 Update *** all Questions And Responses Shall Be Submitted Via E-mail To The Point Of Contact Listed Below, No Later Than The Closing Date Of This Notice.  notice: The Government Considers Information On Market Capabilities, Common Industry Standards, Commercial Terms And Conditions, Pricing, Possible Suppliers, And Sources To Be Helpful.  All Feedback And Information Received May Be Used To Determine The Appropriate Acquisition Strategy For A Possible Future Acquisition.  This Notice Is Issued Solely For Market Research And Planning Purposes And Does Not Constitute A Request For Proposal, Request For Quote, Or Invitation To Bid, Nor Does Its Issuance In Any Way Restrict The Government To Its Ultimate Acquisition Approach.  No Award Will Be Made From This Rfi, And The Government Will Not Pay For Any Effort Expended In Responding To This Notice. The Information In This Rfi Is Subject To Change And Is Not Binding On The Government.  the United States Air Force Sustainment Center (afsc) Is requesting Feedback From Industry On The Attached Draft Performance Work Statement (pws) For Strategic Commercial Common Repairable Support Services For The Kc-46a Aircraft.  interested Vendors Are Encouraged To Submit Information For The Questions Below. This Rfi Is Prepared For Planning Purposes Only.  Sources Are Discouraged From Submitting Any Information Deemed Competition-sensitive Or Proprietary.  However, If Sources Elect To Submit Competition-sensitive Or Proprietary Information, Sources Bear Sole Responsibility For Marking Said Information As Such To Ensure Appropriate Safeguarding By The Government.  The Government Shall Not Be Held Liable For Any Damages Incurred If Proprietary Information Is Not Properly Identified.  All Submission Become Government Property And Will Not Be Returned.  interested Vendors Should Respond To The Following:  comments On Whether Sufficient Detail Is Provided For The Required Tasks To Allow For A Clear Understanding Of The Requirement.    suggested Revisions To Clarify And Further Define The Performance Work Statement Requirements. Suggestions May Be Provided Via Track Changes/comments Within The Draft Pws.    questions Related To The Content Of The Draft Pws.    it Is Afsc’s Understanding That Commercial Industry Does Not Use Iuid (item Unique Identification).   per Https://dodprocurementtoolbox.com/site-pages/unique-id The Dod Recognizes Six Commercially Used Unique Identifiers As Iuid Equivalents: The Vehicle Identification Number, Or Vin; The Cellular Mobile Telephone Identifier (cmti); The Mobile Equipment Identifier (meid) ; The Electronic Serial Number (esn); The Global Individual Asset Identifier (giai); And The Global Returnable Asset Identifier (grai). These Iuid Equivalents May Be Used In Lieu Of Assigning A New Uii.  would Any These Equivalents Be Used In Fulfilling The Requirements Of This Pws?    does The Pws Make It Clear That The Government Does Not Require The Same Item(s) To Be Returned And Is Willing To Accept An Exchange?   for Example, Usaf Sends An Unserviceable Item To The Vendor For Inspection/repair. The Contract Stipulates That This Item Has A 30 day Repair Turn Around Time (rtat). After Inspection, The Vendor Realizes That They Cannot Meet The 30 Day Rtat But They Have The Same Exact Item In Their Inventory That Is Ready To Ship. The Government Will Accept The Ready To Ship Item (with 8130-3/coc) And The Unserviceable Item Becomes Part Of The Vendor’s Inventory And Is Not Required To Be Returned To The Government.    how Does The Commercial Market Provide Pricing For Repair And Return And/or Exchange Of An Item?    the Government Is Considering A Multiple Award, Indefinite Delivery, Indefinite Quantity (idiq) Approach. Are There Any Aspects We Need To Consider Before Soliciting This Requirement In Such A Manner?    please List Any Challenges Or Roadblocks Related To Fulfilling The Draft Pws.    the Proposed Naics For This Effort Is 336413: Other Aircraft Parts And Auxiliary Equipment Manufacturing. The Proposed Product Service Code Is J016: Maintenance/repair/rebuild Of Equipment - Aircraft Components An Accessories. Please Comment On This Naics And Psc. Provide Any Suggestions For Alternative Codes With Supporting Rationale.   attachments: draft Pws nsn Listing ***end Of Feb 6 2024 Update *** ***october 3, 2022 Update *** this Sss Has Been Reopened As Of October 3, 2022. An Updated Attachment (kc 46 Commercial Common Sources Sought Synopsis 03 Oct 22) Is Attached To This Notice. The Only Change Between The 03 Oct 22 Attachment And The Previously Attached 05 Aug 22 Attachment Is The Point Of Contact Information At Section 4 Of The Instructions.  if You Have Already Submited A Response To This Sss, No Futher Action Is Required.  ****************************** this Sources Sought Synopsis (sss) Is Being Conducted To Identify Potential Sources That May Possess The Expertise, Capabilities, And Experience To Meet The Requirements Of The Kc-46 Commercial Common Repairable Support Effort.  the 424th Supply Chain Management Squadron Requires Support For The Commercial Common National Stock Numbers For The Kc-46. The Kc-46 Aircraft Provides Worldwide, Day And Night, And Adverse Weather Aerial Refueling To Receiver-capable Us, Allied, And Coalition Military Aircraft, Including Unoccupied Aircraft. The Kc-46 Tanker Is Based On Commercial Far Part 12, Federal Aviation Administration (faa) Or Equivalent, Certified 767-2c Aircraft, Which Is Finished To Meet The Unique Kc-46 Tanker Requirements. To Uphold This Certification For An Accepted Kc-46a, The Sustainment Requirements Will Ensure Compliance With Amended, Supplemental, And Military Type Certifications (atc/stc/mtc). attached Is A Description Of The Kc-46 Strategic Commercial Common Repairable Support Effort, And A Contractor Capability Survey, Which Allows You To Provide Your Company’s Capability. if, After Reviewing These Documents, You Desire To Participate In The Market Research, You Should Provide Documentation That Supports Your Company’s Capability In Meeting These Requirements By Answering The Each Question In Part Ii Of The Survey.

Details: This Is A Sources Sought Notice And Is For Market Research Purposes Only. This Is Not A Request For Proposal, Quotation Or Bid. No Solicitation Is Currently Available. the U.s. Army Corps Of Engineers, Omaha District Is Conducting Market Research To Identify Sources (small Businesses And Other-than-small Businesses) That Have The Knowledge, Skills And Capability To Perform The Work Concerning The Potential Project Described Below. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $65m. The Responses To This Source Sought Announcement Will Be Used By The Government To Make Appropriate Acquisition Decisions For This Project. responses Are To Be Sent Via Email To Scott.dwyer@usace.army.mil And Courtesy Copy Jessica.r.jackson@usace.army.milno Later Than 2:00 P.m. Cdt, 07 January 2025. questions Or Concerns Surrounding Small Business Matters Can Be Sent To Cenwo-sb@usace.army.mil. Please Include The Sources Sought Notice Identification Number In The Subject Line Of Any Email Submission. magnitude Of Construction: disclosure Of The Magnitude Of Construction, As Prescribed In Far 36.204 And Dfars 236.204, Is Between $25m And $100m. This Project Will Be Primarily Funded With Milcon-appropriated Dollars. project Location And Description: this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). pavements & Maintenance Facility, Grand Forks Air Force Base (gfafb), North Dakota (nd). this Project Will Provide A Storage And Light Maintenance Facility To Store And Maintain Snow Removal Equipment. This Storage Facility Is Approximately 60,000 Sf With Space To Perform General Vehicle Maintenance. The Project Also Includes Ground Support Equipment (gse) Paving. This Project Also Includes Demolition Of Approximately 80,000 Sf Of Existing Facilities. Supporting Facilities Include Providing Liquid Storage Tanks, Generator, And Fuel Storage Tanks. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. special Construction And Functional Requirements: The Project Will Be Constructed Near The Southern End Of The Flightline Facilities At Gfafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. Demolition Of Existing Utilities And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. project Period Of Performance: period Of Performance Will Be 900 Calendar Days From Construction Ntp. project Labor Agreement Requirements: please Note, This Project May Be Subject To A Project Labor Agreement As Per Executive Order (e.o.) 14063. A Separate Project Labor Agreement Survey Will Be Posted To Sam.gov To Assist With The Market Research Of This Acquisition. submission Details: all Interested, Capable, Qualified (under Naics Code 236220 – Commercial And Institutional Building Construction) And Responsive Contractors Are Encouraged To Reply To This Market Survey Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature For Each Facility As Described Above. Narratives Shall Be No Longer Than 12 Pages. E-mail Responses Are Required. please Include The Following Information In Your Response/narrative: company Name, Address, And Point Of Contact, With (h)is/her Phone Number And Email Address cage Code And Duns Number statement Certifying Business Size Such As Wosb, Sdvosb, Etc. To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture details Of Similar Projects Within The Last 8 Years And State Whether You Were The Prime Or Subcontractor start And End Dates Of Construction Work project References (including Owner With Phone Number And Email Address) project Cost, Term, And Complexity Of Job information On Your Bonding Capability - Specifically Identify Performance And Payment Bonds Capacities details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years. construction Of Vehicle Storage And Or Vehicle Maintenance Facilities, Or Similar To Include Associated Site Features, Utilities, And Infrastructure. construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) construction Of Facilities On A Dod Military Installation. construction Of Facilities On An Active Airfield Flightline. construction Of Ufc 1-200-01, Building Code General Requirements construction Of Ufc 1-200-02 High Performance And Sustainable Building Requirements abatement And/or Remediation Of Asbestos, Lead Based Paint, And/or Other Hazardous Materials. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. please Note: At This Time, We Are Only Interested In Responses From Companies Who Have The Ability To Be Prime Contractors With Bonding Capability (single Job) Of At Least $65m. estimated Construction Contract Award Will Be Second / Third Quarter Of Fiscal Year 2026. telephone Inquiries Will Not Be Accepted.

Details: Description(s):sources Sought Synopsis/request For Information For Fiber Cables And Other Materials. this Is A Market Survey For Information Only. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded From This Synopisis. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow-up Information Requests. The Purpose Of This Synopsis Is To Gain Knowledge Of Potentially Qualified Sources And Their Size Classifications (small Business, Large Business, Etc.). Please Do Not Request A Copy Of A Solicitation, As One Does Not Exist. 1. Purpose. this Is A Sources Sought Synopsis In Support Of Market Research Being Conducted By The United States Air Force To Identify Potential Sources For Fiber Cables And Other Materials. 2. Requirement. please See Statement Of Requirements For Specific Part Numbers And Quantities. The Materials Are Required For User To Install Fiber Patches To Support Network Growth. No Contracted Labor Or Services Requested. Fiber Cable Shall Be Pre-terminated. 3. Information Requested. the Government Requests Interested Offerors That Can Fully Support This Requirement Furnish The Following Information: 1. Company Name, Sam Uei And Cage Code, Address, Points Of Contact, Phone Numbers And E-mail Addresses. 2. Information Should Include A Brief Description Of Experience In Providing The Type Of Products Listed On The Statement Of Requirements. The Information Package Must Be Clear, Concise, And Complete. The Air Force Is Under No Obligation To Provide Feedback To The Company, Or To Contact The Company For Clarification Of Any Information Submitted In Response To This Request. 3. Identification Of Business Size (small Or Large) And Identify The Socioeconomic Disadvantaged Category, As Defined The Federal Acquisition Regulation Far Part 19 And Also Currently Listed In The System For Award Management (sam). Small Business Size Standards Are Published By The U.s. Small Business Administration (sba) And May Be Found At Www.sba.gov/size/sizetable2002.html. The Potential North American Industry Classification System (naics) Codes Assigned To This Procurement Is 335921 “fiber Optic Cable Manufacturing”. The Small Business Size Standard Is 1,000 Employees. 4. Any Other Information Deemed Useful To The Air Force. Information Packages Should Be Limited To No More Than 1 Pages. 4. Inquiries. any Qualified And Interested Companies Responding To This Announcement Must Be Able To Support All Areas. No Partial Support Responses From Industry Will Be Accepted. all Responses Shall Be Forwarded To Karla Vazquez Karla_lizette.vazquez_montes@us.af.mil And Denina Hudson Denina.hudson@us.af.mil. The Due Date And Time For Responses To This Synopsis Is 10:00 Am Pacific Standard Time On Tuesday 07 January 2025.

Details: The Naval Facilities Engineering Systems Command (navfac) Europe, Africa, Central (eurafcent) Naples, Italy Is Preparing To Solicit An Indefinite Delivery Indefinite Quantity (idiq) Multiple-award Construction Contract (macc). The Purpose Of This Macc Is To Execute Sustainment, Restoration, And Modernization (srm) Projects, Alteration, Demolition, Repair, And New Construction Or Expansion Of Any Type Of Facilities Or Real Property Assets, Including Waterfront Or Airfields Facilities. Projects Will Be Executed Through Firm-fixed Price (ffp) Design-bid-build Or Design-build Task Orders. The Geographic Scope Of The Contract Includes The Kingdom Of Bahrain And United Arab Emirates. The Solicitation Will Be Issued Using Full And Open Competition, Utilizing The Two-phase Design-build Selection Procedures Discussed At Far Subpart 36.3, Resulting In A Single Solicitation Covering Both Phases. The Naics Code For This Procurement Is 236220 With A Small Business Size Standard Of $45 Million. The Government May Award This Contract To More Than One Contractor. The Government Will Give Fair Consideration To All Awardees In Placing Orders Based On Criteria Stated In The Solicitation. The Contract Term Will Be A Base Period Of One (1) Year Plus Four (4) One-year Option Periods. Only The Base Period Of The Contract Will Offer A Minimum Guarantee. If A Follow-on Contract Is Not Awarded At The End Of The Fourth Option Period, The Government May Require The Contractor To Continue Performance For An Additional Period Up To Six Months Under The Option To Extend The Term Of The Contract Clause. This Contract Will Replace A Contract For Similar Services Awarded On 2 September 2020 With A Shared Award Value Of $32,443,248 And Maximum Capacity Of $95,000,000. this Solicitation For The First Phase Of This Requirement Is Expected To Be Released Between The Months Of January 2025 And February 2025 With An Anticipated Award Date Of September 2025. Offerors Can View And/or Download The Solicitation, And Any Attachments, At Https://piee.eb.mil Under Piee (procurement Integrated Enterprise Environment) Solicitation Module When It Becomes Available. a Sources Sought Notice For This Procurement Was Posted To Sam.gov On 02 July 2024 With A Closing Date Of 16 July 2024. A Market Survey Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement On An Unrestricted Basis Inviting Full And Open Competition. disclaimer: This Notice Is For Information Purposes Only And Shall Not Be Construed As A Commitment By The Government To Solicit Contractual Offers Or Award Contracts. The Government Is Not Soliciting, Nor Will It Accept Proposals As A Result Of This Synopsis. If A Competitive Solicitation Is Issued In The Future, It Will Be Announced Via Sam.gov And Interested Parties Must Comply With Announcement. The Government Will Not Reimburse Respondents For Any Questions Submitted Or Information Provided As A Result Of This Notice. This Is Not A Solicitation Or A Promise To Issue A Solicitation, And This Information Is Subject To Modification And In No Way Binds The Government To Award A Contract.

Description: Competition for entries below the European thresholds - sectors (services) Award of freelance services for broadband advice in central Hesse The Regional Management Mittelhessen GmbH would like to continue the broadband advice position in central Hesse, financed from funds from the state of Hesse. The broadband advice will remain organizationally located at the Regional Management Mittelhessen GmbH. Central coordination and back office functions will be taken over by the regional management office. The content of the advice service is to be organized via a freelance service provider. 1. Tasks of broadband advice The task of broadband advice is, in close coordination with the Hessian Broadband Office, to support the central Hessian municipalities across districts in connecting to the high-speed Internet. This includes: - Provider and technology-neutral advice for Hessian municipalities on the subject of broadband expansion (also on site), - Support for implementation projects on site, - Support in conducting information events and specialist forums, - Support in drawing up project outlines, - Provider and technology-neutral advice on using the relevant funding programs such as GRW, EFRE, empty pipe funding as well as loan and guarantee programs, - Initial advice on financing broadband expansion, - Regular coordination meetings with the Hessian Broadband Office in Wiesbaden, - Regular participation in the working group meetings of the district coordinators, - Regular documentation and reporting of activities to the Hessian Ministry for Economic Affairs, Energy, Transport and Housing and to Hessen Trade & Invest GmbH - For nationwide expansion, further individual projects are to be initiated and accompanied and supported in their implementation - Situational support for the Hessian Broadband Office. The extended tasks of the broadband consultants include the following: - Status quo reports on current and planned expansion projects (subsidized and market-based expansion) - Exploring potential (particularly for under-supplied local authorities - Analyzing options together with local authorities (market-driven and subsidized expansion) and thereby creating supply perspectives; raising awareness of funding programs in the absence of market-based expansion - Exploring the need for support when submitting applications and accompanying the application and approval process - Monitoring the implementation status of the current expansion projects - Raising awareness of how to leverage synergy effects (laying empty pipes, taking into account potential for (later) mobile network expansion when expanding the fixed network) - Risk management (e.g.: current disruptions? Deviation from original planning and strategy, increased funding requirements...) - If required: support with queries in the Hessian districts (e.g.: estimating funding requirements for planned subsidized expansion projects; Half-yearly school survey to query digital infrastructures). 2. Framework conditions for broadband consulting We offer the following framework conditions for taking over the service: - Project period: January to November 2025, - Freelance assignment through service contract, - The broadband consulting is to be filled by a service provider (100% position) (for operational reasons the 100% position can also be split into two 50% positions), - Mobile workplace desirable, infrastructure of the Central Hesse Regional Management is available.

Description: This Requirement Is For: The Correctional Service Of Canada, Pacific Region. Trade Agreement: Canadian Free Trade Agreement (cfta), World Trade Organisation-agreement On Government Procurement (wto-agp), Canada Ukraine Free-trade Agreement (cufta), Canada Korea Trade Agreement (ckta), Canada Free Trade Agreements With Chile/colombia/honduras/panama, Canada-peru Free Trade Agreement, Canada-european Union Comprehensive Economic And Trade Agreement (ceta) And Canada-united Kingdom Trade Continuity Agreement (canada-uk Tca), Comprehensive And Progressive Agreement For Trans-pacific Partnership (cptpp). Tendering Procedures: All Interested Suppliers May Submit A Bid. Competitive Procurement Strategy: Lowest Priced Compliant Bid. Set-aside Under The Procurement Strategy For Indigenous Business: This Procurement Is Not Subject To Any Set-asides For Indigenous Suppliers. Comprehensive Land Claim Agreement: This Procurement Is Not Subject To A Comprehensive Land Claims Agreement. Security Requirements: This Contract Does Not Include Security Requirements. Nature Of Requirements: The Following Is A Summary Of The Statement Of Work For This Requirement. The Correctional Service Canada's Health Services Branch Has A Requirement For The Delivery Emergency Trauma Care (etc) Training On An As And When Requested Basis To Nurses Working In Csc’s Institutions. The Emergency Trauma Care Training Is The Prehospital Trauma Life Support (phtls) Course Or A Course With The Same Training Content And Will Be Referred To As Etc In This Statement Of Work. Objectives: To Certify Csc Nurses In Etc Through Training Delivered In A Pre-hospital Setting Based On A Pre-hospital Trauma Care Model. Nurses Who Have Successfully Completed This Training Will Be Able To Demonstrate Sound Knowledge And Skills In Emergency And Trauma Response. Tasks The Contractor Must Provide All Training Materials And Equipment Including Audiovisual Equipment, And Instructors As Well As Transportation Of Training Materials, Equipment And Instructors To And From The Training Location. 1.3.1 Theory Component: The Contractor Must Send The Project Authority Hardcopies Of The Training Materials (textbook, Or Manual Or Both) Upon Confirmation Of Sessions Booked. The Contractor Must Provide A Maximum Of 240 Of The Current And Most Up-to-date Editions Of The Training Manuals Required For The Course At Contract Award. If Applicable To The Training Course, The Contractor Must Send Any Pre-test Or Other Materials To The Project Authority One To Three Weeks Prior To The In-person Course Start Date. Students Are Required To Read And Understand The Theory Component Of The Textbook Content And Complete The Pre-test Prior To The In-person Component. Following The Theory Component, The Contractor Must Provide In-person Training Of Assessment, Skills And Scenarios; 1.3.2 The Contractor Must Provide In-person Training That Meets The Following Requirements: • Only One Instructor Must Deliver The Training; • The Contractor Must Develop And Deliver Scenarios To Csc Nurses To Assess And Manage Trauma Care Patient(s) In A Unique Environment (e.g., In A Federal Correctional Institution), Where Nurses May Carry Emergency Equipment, Medications And Oxygen To The Location Of The Emergency When A Patient Cannot Quickly And Easily Be Brought To The Health Services Centre. Nurses May Respond To An Emergency When A Person Is Unconscious On The Ground. Nursing Care May Be Provided In Sometimes Small, Confined Or Other Cramped Spaces (e.g., Inmate's Cell). Nurses Must Have The Ability To Provide Care That Includes, But Is Not Limited To Airway Management Including Airway Insertion, Using An Ambu Bag, Chest Compressions, And Any Other Interventions That A Nurse May Need To Administer To A Patient In An Emergency Situation. The Contractor Must Meet With The Project Authority At Contract Award To Discuss Scenario Development. The Project Authority Will Provide Specific Scenarios To The Contractor At Contract Award. • The Training Must Be Completed Within One To Three Weeks From The Theory Component (which Must Be Delivered Via A Hard Copy Text Book); • Deliver The Key Components Of The Course (as Listed Below) Utilizing Knowledge And Hands On Assessment According To International Etc Outline: O Scene Management And Primary Survey O Airway Management O Circulation And Iv Therapy O Secondary Survey O Kinematics Of Trauma O Head Trauma O Spinal Trauma O Disabilities And Fractures O Burns O Multi-patient Care 1.3.3 Maximum Number Of Emergency Trauma Care Training Sessions: • The Contractor’s Instructor(s) Must Provide The Required Number Of Training Sessions In Pacific Region. Each Session Will Have A Minimum Of Four (4) And Maximum Of Six (6) Participants. Csc May Add Participants With The Contractor’s Agreement. The Number Of Participants And Sessions Is Subject To Change Depending On Csc's Needs And The Number Of Participants Per Session. Stream Estimated Maximum Number Of Sessions Pacific Region 40 The Estimated Number Sessions Is Based On Delivery Of Training Sessions During Previous Years. It Does Not Represent A Commitment From Csc That Csc’s Actual Requirements During The Course Of The Contract Will Be Consistent With This Number. 1.3.4 The Contractor Must Provide Instructor(s) To Deliver The Etc Training In English, On An “as And When Requested Basis”. 1.3.5 The Instructor(s) Must Perform The Following Tasks: A) If Applicable, Supply The Project Authority With Instructions To The Shared With The Participants For The Theory Component Of Etc Training And Pre-testing Requirements; B) Provide In-person Training Sessions To Participants; C) Provide A List Of, And Information On, The Electronic Devices The Contractor Requires For Delivery Of The In-person Training. Csc Will Determine The Devices’ Compatibility With Its Whiteboards Or Overhead Projectors And Approve Them To Allow The Contractor To Bring Them Into A Csc Environment. The Contractor Must Be Prepared To Adjust Its Selection Of Electronic Devices Depending On Their Compatibility With Csc Equipment And Acceptability For A Correctional Environment; D) Arrive And Log-in At Least 30 Minutes Prior To The Start Of Training To Ensure That Training Equipment Is Operational And The Training Room Is Properly Set Up. The Instructor Is Responsible For The Working Order Of Their Electronic And Medical Training Equipment. E) Greet And Provide Administrative Briefing To Participants At The Beginning Of The In-person Training. Outline The Course Content And Evaluation; F) Provide Administrative Briefing For The Location Of Fire Exits, Washrooms, And Lunchroom For The In-person Session; G) Provide An Attendance Sheet And Have Participants Sign It For Both Training Days During The In-person Session; H) Review The Attendance Sheet To Ensure Participants Have Signed; I) Assess The Participants To Ensure They Have Successfully Completed The Training; J) Send A Certificate Of Completion For Each Participant; To The Csc Regional Practice Lead, Nursing; K) Deliver The Training Content In Accordance With Policies And Procedures Reflective Of A Unique Pre-hospital Setting Trauma Care Environment Using Correctional Institution Type Scenarios ; L) Provide Their Own Electronic Devices Required To Facilitate The Training; M) Provide A Supportive Learning Environment Conducive To Motivating Optimal Learning; N) Encourage Participants To Engage With Each Other In Support Of The Learning Objectives; O) Help And Guide The Participants Learn The Subject Matter; P) Ensure The Training Timeline Is Managed Effectively; Q) Keep The Discussion(s) On Track; 1.3.6 Course Hours And Duration The Contractor Must Deliver The In-person Training Sessions During Csc’s Core Business Hours, From 8:00 A.m. To 4:00 P.m. The Contractor Must Obtain The Project Authority’s Approval, In Advance, For Any Change In The Training Hours. The In Person Facilitation Must Be A Maximum Duration Of Sixteen Hours (two Days). 1.3.7 Training Cancellation Or Rescheduling (a) Csc May Cancel Or Reschedule The In-person Training At No Charge By Giving A Written Notice To The Contractor By Email At Least Seven (7) Calendar Days Prior To In-person Training Delivery; (b) Csc May Cancel In-person Training Due To An Unforeseeable Or Uncontrollable Event (including, But Not Limited To A Lockdown, Strike, Virus Attack, A Pandemic, A Power Or Technical Failure) At No Charge Regardless Of When Csc Gives Notice To The Contractor. (c) In The Event That Csc Cancels Or Reschedule An In-person Training Session (for Reasons Other Than An Unforeseeable Or Uncontrollable Event) Less Than Seven Calendar Days Prior To The Delivery Date, The Contractor Will Be Paid 25% Of The Firm Price Per In-person Training Session In Accordance With Annex B-basis Of Payment; (d) In The Event That Csc Cancels Or Reschedules A Scheduled Training On The Day Of Or During The Training, The Contractor Will Be Paid The Full Firm Price Per In-person Training Session In Accordance With Annex B-basis Of Payment; Deliverables: The Contractor Must Provide: 1.4.1 A Hard Copy Version Of The Training Manuals For The In-person Training, For Each Participant As Well As Any Required Training Handouts; 1.4.2 A List Of All Successful And Unsuccessful Participants At The End Of Each Training Session To Csc’s Project Authority; 1.5 Location Of Work 1.5.1 The Contractor Must Deliver The Training At The Correctional Learning And Development Centre At: #103-30585b Progressive Way Abbotsford, British Columbia. Any Conditions For Participation Of Suppliers Not Specified In Solicitation Documentation: None. Estimated Quantity Of Commodity: See Solicitation Document Statement Of Work And Basis Of Payment. Duration Of Contract And Time Frame For Delivery: Period Of The Contract: The Work Is To Be Performed During The Period Of February 01, 2025 To January 31, 2028. File Number: 21801-24-0035 Contracting Authority: Kristen Malanowich Telephone Number: (236) 380-6646 Facsimile Number: (604) 870-2444 E-mail: Kristen.malanowich@csc-scc.gc.ca Note To Bidders: Bidders Can Obtain The Complete Statement Of Work And Evaluation Criteria By Downloading The Solicitation Document And Associated Documents From The Canada Buys / Tender Opportunities Website. The Crown Reserves The Right To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada (english Or French). After Contract Award, Bidders May Request A Debriefing On The Results Of The Bid Solicitation Process. Bidders Should Make The Request To The Contracting Authority Within Fifteen (15) Working Days Of Receipt Of The Results Of The Bid Solicitation Process. The Debriefing May Be In Writing, By Telephone Or In Person. Procurement Assistance Canada (pac) Offers Seminars To Businesses Interested In Learning How To Sell Goods And Services To The Government Of Canada. The Seminars Are Free. Topics Include: ? Understand The Federal Procurement Process; ? Learn About Searching For Opportunities; ? Find Out How To Bid On Opportunities; ? Discover How To Prepare To Sell To The Government. The Full Schedule Of Seminars Can Be Found On The Procurement Assistance Canada Website, Under Find An Event (procurement Assistance Canada: Find An Event - Canada.ca).

Details: The Naval Air Systems (navair) Command, Precision Strike Weapons Program Office (pma-201), Intends To Conduct A Full And Open Competition For An Electronic, General Purpose Bomb (gpb) Fuze Munition Unit (fmu-179/b). The Fuze Munition Unit (fmu) - Bomb Fuze Is The Primary Fuze That Has Been Deployed By United States (us) Forces And North Atlantic Treaty Organization (nato) Allies For The Last Thirty Seven (37) Years In Air-dropped Conventional General Purpose (gp) Warhead-based Weapons Systems Including The Joint Direct Attack Munition (jdam) And Is The Primary Fuze Used In All Mark (mk)-80/bomb Logistics Unit (blu) Series Gp Bombs.the Fmu-179/b Will Have Cockpit Control Of Fuze Arm Times And Functional Delay Times Via The Serial Data Interface (sdi) Between The Fuze And Sdi Capable Weapon Systems. The Fmu-179/b Will Have Faceplate Switches For Weapons With No Sdi Capability. Additionally The Fmu-179/b Will Have Increased Hardened Target Penetration Capability And Will Incorporate Forward And Aft Power Connection. Additionally, The Fmu-179/b Will Incorporate Forward And Aft Power Connections. The Fmu-179/b Is Currently Required To Replenish Nato And United States Government (usg) Bomb Fuze Inventories. tasking For This Effort Will Include Design And Development Of The Fmu-179/b Fuzing System (including Associated Sub-system And/or System Analysis And Testing), Systems Engineering (including Open Architecture, Digital Engineering, Requirements Verification, System Safety, And Design Reviews), Program Management, System Security (including Maintaining Required Security Infrastructure), Product Support, And Qualification Testing And Evaluation Through Operational Test (ot). Emd Also Includes Activities Associated With Transitioning The Fmu-179/b System To Production And Delivery Of Test Assets In Support Of Equipment Operational Capability (eoc) And Initial Operation Capability (ioc). interested Companies Should Respond By Submitting The Following Information: support In A Capability Statement Response To N00019-25-rfpreq-wpm201-0072: 1. Summary Of Your Company’s Expertise In The Development, Integration, And Manufacturing Of Gpb Fuzes. Statements Of Your Firm’s Expertise Should Include Reference To Relevant Contracts Performed (including A Description Of The Scope, Quantity Manufactured, Contract Number, And Point Of Contact With Phone Number).” 2. Has Any Experience Producing Electronic Gpb Fuzes. 3. Provide A Statement Regarding The Vendor’s Ability And Willingness To Enter Five Year Production Contract. 4. Business Size Information As It Applies To Naics Code 332994; 5. Affirmation That The Vendor Or Its Parent Company Is Not Under Foreign Ownership, Control, Or Influence (foci), As Per The National Industrial Security Program Operating Manual (nispom). the Following Section Is Optional And Will Not Be Included In The Capability Determination. These Responses Are Requested To Help The Government Understand The Position Of Industry Related To Each Topic And Craft The Best Possible Solicitation. The Government Does Not Intend To Provide A Direct Response To The Inputs Provided. 1. The Government Is Currently Evaluating The Proposed Period Of Performance For This Requirement. The Government Is Considering An Ordering Period For First Article Test And Then A Base Year Of Production Plus 4 Ordering Periods. Please Provide Your Feedback On The Potential Of Each Proposed Period Of Performance. topic A Company Response: 2. The Government Wants To Understand If There Are Any Barriers Prohibiting Competition Within Industry With Respect To This Procurement. topic B Company Response: 3. Industry May Use This Response Topic To Provide Any Other Feedback, Not Already Addressed Associated With The Sources Sought. topic C Company Response: ***end Of Response To N00019-25-rfpreq-wpm201-0072*** the Respondents Shall Provide Their Company Cage Code, A Point Of Contact, And A Capability Statement. If Interested In This Requirement, Please Provide The Required Eligibility Information Within 15 Calendar Days Of This Notice To Kevin Simone Via Email At Kevin.a.simone.civ@us.navy.mil. Navair Plans To Release A Draft Request For Proposal (rfp) And Fmu 179/b Performance Specification For Industry Review And Comment In The 2nd Quarter Of Fy25 With The Final Rfp Anticipated To Be Released During The 1st Quarter Of Fy26. This Is A Market Survey That Has Been Issued For Planning Purposes Only And Shall Not Be Construed In Any Way As A Request Or Proposal Or As Any Obligation On The Part Of The Government To Acquire The Aforementioned Item. The Government Does Not Intend To Award A Contract On The Basis Of The Responses Submitted To This Market Survey Or Otherwise Pay For Information Solicited. The Government Will Utilize The Information Provided Only To Assist In Developing An Acquisition Strategy For Future Requirements. Please Identify Any Proprietary Information Submitted. All Data Received In Response To This Sources Sought That Is Marked Or Designated As Proprietary Will Be Protected From Any Release Outside The Government. in Accordance With Director, Defense Pricing And Contracting (dpc) And Navair Policy, The Solicitation Module In The Procurement Integrated Enterprise Environment (piee) Tool Is The Authorized Means Of Competitive Proposal Receipt. Accordingly, Vendors Will Need To Have Or Gain Access To Piee To Enable Secure, Timestamped Submission Of Contract Proposals. To Obtain A New Piee Account, Please See The Guidance At The Following Link: https://pieetraining.eb.mil/wbt/xhtml/wbt/portal/overview/govtandgovtcontregister.xhtml piee Users Who Have An Existing Account, But Need To Add A Role In The Solicitation Module Should Log Into Piee And On The Landing Page, Select “my Account” And “add Additional Roles.” The System Will Prompt The User Through Multiple Screens Wherein Account Information Is Updated. On The Modules/roles Screen, Select The Following: Solicitation Module/solicitation Manager Role.

Details: Fy26 Eafb - 80 Row Eps, Ellsworth Afb, South Dakota (sd) sources Sought Notice #w9128f25sm004 anticipated Solicitation #w9128r25r0027 this Is A Sources Sought Notice And Is For Market Research Purposes Only. This Is Not A Request For Proposal, Quotation Or Bid. No Solicitation Is Currently Available. the U.s. Army Corps Of Engineers, Omaha District Is Conducting Market Research To Identify Sources (small Businesses And Other-than-small Businesses) That Have The Knowledge, Skills And Capability To Perform The Work Concerning The Potential Project Described Below. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $65m. The Responses To This Source Sought Announcement Will Be Used By The Government To Make Appropriate Acquisition Decisions For This Project. responses Are To Be Sent Via Email To Thomas.g.mcfall@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil No Later Than 2:00 P.m. Cdt, 07 January 2025. questions Or Concerns Surrounding Small Business Matters Can Be Sent To Cenwo-sb@usace.army.mil. Please Include The Sources Sought Notice Identification Number In The Subject Line Of Any Email Submission. magnitude Of Construction: disclosure Of The Magnitude Of Construction, As Prescribed In Far 36.204 And Dfars 236.204, Is Between $25m And $100m. This Project Will Be Primarily Funded With Milcon-appropriated Dollars. project Location And Description: Ellsworth Afb, Sd this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). b-21 80 Row Eps, Ellsworth Air Force Base (eafb), South Dakota (sd). this Project Will Provide Six (6) New Pre-engineered Metal Environmental Protection Shelters (eps), Approximately 20,000 Sf Each. Eps’s Are Sized To Fit The B-2a “spirit” Aircraft With Space To Perform General Aircraft Maintenance. The Project Also Includes Associated Airfield And Ground Support Equipment (gse) Paving. Supporting Facilities Include Three (3) Maintenance Kiosks, Approximately 160 Sf Each, Providing Electrical And Communication Infrastructure To The Eps’s. This Project Will Include A Space Or Spaces Constructed To Afi 16-1404 Requirements. Additionally, This Project Will Full Demolition Of Existing Facilities And Partial Demotion Of Dock 83 And Reconstruction Of The Exterior Metal Wall Of Dock 83. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. special Construction And Functional Requirements: The Project Will Be Constructed Near Row 80 Of Flightline Facilities At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Utilities And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. New Airfield Apron Will Be Designed In Compliance With Ufc 3-260-02 And Will Be Constructed In Compliance With Ufgs 32 13 14.13. project Period Of Performance: 800 Calendar Days From Construction Ntp. project Labor Agreement Requirements: please Note, This Project May Be Subject To A Project Labor Agreement As Per Executive Order (e.o.) 14063. A Separate Project Labor Agreement Survey Will Be Posted To Sam.gov To Assist With The Market Research Of This Acquisition. submission Details: all Interested, Capable, Qualified (under Naics Code 237990 – Other Heavy And Civil Engineering Construction) And Responsive Contractors Are Encouraged To Reply To This Market Survey Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature For Each Facility As Described Above. Narratives Shall Be No Longer Than 12 Pages. E-mail Responses Are Required. please Include The Following Information In Your Response/narrative: company Name, Address, And Point Of Contact, With (h)is/her Phone Number And Email Address cage Code And Duns Number statement Certifying Business Size Such As Wosb, Sdvosb, Etc. To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture details Of Similar Projects Within The Last 8 Years And State Whether You Were The Prime Or Subcontractor start And End Dates Of Construction Work project References (including Owner With Phone Number And Email Address) project Cost, Term, And Complexity Of Job information On Your Bonding Capability - Specifically Identify Performance And Payment Bonds Capacities details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years. construction Of Airfield Paving In Compliance With Ufc 3-260-02 Or Associated Unified Federal Guide Specifications. construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) construction Of Facilities To The Afi 16-1404 Or Equivalent Standards. construction Of Facilities Designed To Resist Vibroacoustic Impacts Associated With Aircraft (or Other) Engine Runup And Taxiing. construction Of Facilities On A Dod Military Installation. construction Of Facilities On An Active Airfield Flightline. abatement And/or Remediation Of Asbestos, Lead Based Paint, And/or Other Hazardous Materials. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. please Note: At This Time, We Are Only Interested In Responses From Companies Who Have The Ability To Be Prime Contractors With Bonding Capability (single Job) Of At Least $65m. estimated Construction Contract Award Will Be Second / Third Quarter Of Fiscal Year 2026. telephone Inquiries Will Not Be Accepted.

Details: This Sources Sought Notice Is For Informational And Planning Purposes Only And Shall Not Be Construed As A Solicitation, An Obligation Or Commitment By The Albuquerque Area Indian Health Service. This Notice Is Intended Strictly For Market Research To Determine If A 100% Set Aside For Small Business Indian Firms, 100% Indian Owned Economic Enterprises Or 100% Set Aside For Small Business Concerns Can Fulfill The Requirements Set Forth In This Sources Sought Notice. the Purpose Of This Notice Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification/socioeconomic Status (small Business Indian Firms, Indian Owned Economic Enterprise Or Small Business). This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. the Albuquerque Area Indian Health Service Is Conducting A Market Survey To Help Determine The Availability Of The Following Item/service: naics Code: 337215 For Showcase, Partition, Shelving, And Locker Manufacturing description: Pharmacy Shelving if Your Business Can Offer This Item/service Or A Brand Name Or Equal To Item, Please Provide A Product Brochure And Or Any Other Product Information To Eric.wright@ihs.gov. responses To This Notice Will Be Used By The Government To Make Appropriate Acquisition Decisions. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It Will Be Announced On Federal Business Opportunities Website Https://www.sam.gov At A Later Date, And All Interested Parties Must Respond To The Solicitation Announcement Separately From The Responses To This Announcement In Order To Be Considered. your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Appropriate. please Submit All Information To Eric K. Wright Via E-mail: Eric.wright@ihs.gov By January 2, 2025 At 12:00 Pm (mountain Daylight Savings Time). interested Parties Are Required To Be Registered And Certified In The System For Award Management (sam). Registration May Be Accomplished At Https://www.sam.gov. responses To This Notice Should Include Company Name, Address, Point Of Contact, Uei, Size Of Business Pursuant To North American Industrial Classification System (naics) And Must Respond To The Following Questions: is Your Business A Small Business Indian Firm? Is Your Business An Indian Owned Economic Enterprise? Is Your Firm A Veteran Owned Small Business? Certified Service-disabled Veteran Owned? Is Your Firm A Woman-owned Or Operated Business? Is Your Business A Small Business? interested Businesses Are Required To Submit A Statement Of Capabilities (soc) Demonstrating: ability To Manage The Services, Description Of Past Performance On Previous Contracts, Dollar Value Of Each Contract, Number Of Employees For Each, The Types And Range Of Skills Of Employees For Each, And Point Of Contact And Telephone Number Of The Contracting Activity For Each Contract. a Capability Statement, Including Summary Of Relevant Performance History (with Points Of Contact And Applicable Telephone Numbers, Fax Numbers, Addresses And Email Addresses, If Available) Within The Past Three Years. automated Responses Which Do Not Provide The Requested Information Specified In This Source Sought Notice Will Be Considered Non-responsive And Will Not Be Considered In This Market Research.

Details: Description In View Of The Two (2) Public Biddings, The Barangay Council Of Barangay Potong Del Norte Through Its Bids And Awards Committee (bac) And, Budget Approved By Sanggunian, Brgy. Fund 2024 (spa Cy2024) Invites Interested Bidders To Participate In The Negotiation For The Project, “procurement Of Tri-wheeled Vehicle” In Accordance With Section 53.1 Of The Revised Implementing Rules And Regulations (irr) Of Republic Act (r.a.) No. 9184, Otherwise Known As The “government Procurement Reform Act.” The Approved Budget For The Contract (abc) Is Two Hundred Sixty Thousand Pesos Only (php 260,000.00). For More Details On This Project, Please Refer To Attached Schedule Of Requirements (annex A) And Technical Specifications (annex B). 2. The Following Eligibility And Technical Documents, As Well As The Financial Proposal Form (annex C) Shall Be Submitted On Or Before January 6, 2025, 2:00 P.m. At The Brgy. Multi-purpose Hall, Brgy. Potong Del Norte: A. Philgeps Membership Certificate (platinum) Or In The Absence Of Philgeps Certificate, Bidder May Opt To The Following: I. Dti Business Name Registration Or Sec Registration Certificate Or Cooperative Development Authority. Ii. Valid And Current Mayor’s Permit/license To Operate Iii. Tax Clearance Per Executive Order 398, Series Of 2005 As Finally, Reviewed And Approved By The Bir. Iv. Audited Financial Statements B. Statement Of All Ongoing Government And Private Contracts C. Bid Security Issued In Favor Of The Barangay Council Of Potong Del Norte Shall Be Either In The Following Forms And Amount: I. 2% Of The Abc, If Cash Or Cashier’s//manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank; Ii. 5% Of The Abc, If Survey Bond With Certification From Insurance Commission That Such Insurance Company Is Authorized To Issue Such Security; Iii. Bid Securing Declaration. Sample Form Is Attached As Annex D. D. Compliance With The Schedule Of Requirements (annex A) And Technical Specifications (annex B); E. Notarized Omnibus Sworn Statement (form – Annex E); F. Authority Of The Signatory; G. 3. Opening Of The Eligibility Documents, Technical Documents And Financial Proposal Will Be On January 6, 2025, 2:00 P.m. 4. For Further Information, You May Contact Bac Secretariat At 09550027669 From 8:00 A.m. To 5:00 P.m. (working Days And Hours Only). 5. The Barangay Council Of Barangay Potong Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 6. For Further Information, Please Refer To: Jason R. Delmonte Bac Secretariat Barangay Multi-purpose Hall, Potong Del Norte / 1st Floor, Accounting Office, Municipal Building, Lapinig, Northern Samar Contact No.: 09550027669