Survey Tenders

Details: A.3 Visit: a Site Visits Had Been Scheduled On December 12 & 18, 2024 Providing All Vendors The Opportunity Visit The Chelmsford Cmop In Support Of Rfq 36c77025q0066 To Inspect The Facility Pallet Racking Systems. The Location And Time For The Site Visit Was: address: chelmsford Cmop 10 Industrial Avenue chelmsford, Ma 01824-3640 date: December 12 & 18, 2024 @ 09:00 Am Est. b.2 Site Survey (amendment 0002) a Site Visit Had Been Scheduled For December 12 & 18, 2024 Providing All Vendors The Opportunity To Visit The Chelmsford Cmop In Support Of Rfq 36c77025q0066 To Aid In Development Of Cost Estimates. The Location And Time For The Site Visit Is: address: chelmsford Cmop 10 Industrial Avenue chelmsford, Ma 01824-3610 date: December 12 & 18, 2024 At 9:00 Am Est point Of Contact On Site Is: michael D. Graybeal email Address: Mike.graybeal@va.gov phone #: 978-244-1311 note: Any Company Wishing To Attend The Site Visit Must Contact Both Michael Graybeal, Mike.graybeal@va.gov And Wade Cunningham, Wade.cunningham@va.gov Nlt 3p.m. Cst On December 10, 2024 (for 12 Dec Site Visit) & Nlt 2 P.m. Est On December 16, 2024 (for 18 Dec Site Visit). Vendors Are Limited To Two Individuals. Provide Full Name Of Each Person Attending In Advance To The Pocs. All Questions Proposed During The Site Visit, Will Be Posted Along With Answers Under An Amendment To The Rfq. rfi Answers: 1. Are There Any Cad Or Facility Diagrams Of The Racking At The Va? no. 2. Approximate Number Of Uprights And Height? we Have 56 Total Bays. 24 Are 6 Depth And 8-9 Height. These 24 Bays Have Wire Decking At The Top And Rolling Shelves Throughout. The Rest Are Either 42 Or 48 Depth With 12 H Uprights. We Have A Variety Of Beam Levels On These Racks Depending On The Area. These All Have Wire Decking At All Levels. 3. How Old Are The Racking Systems? 20 Years 4. Number Of Participants That Will Receive Training? three Personnel. 5. Average And Maximum Weights Of The Pallets? 2500lbs Or Less 6. Could You Provide More Information About The Warehouse Layout, And Size E.g. The Sqft, Floor Plan, And Pictures To Give Us More Understanding Of The Site? see Photo Attachments. 7. What Type Of Racking Systems Are Installed? unknown. We Just Know They Are Pallet Racks 8. When Was The Last Rack Inspection Conducted? unknown 9. What Is The Level Of Visible Damage On Each Rack? unknown, Minor Wear And Tear That Will Need Replaced. This Was The Intent Of The Site Visit 10. How Many Racks Need To Be Repaired? this Was The Intent Of The Site Visit 11. How Many Racks Need Placards? this Was The Intent Of The Site Visit 12. What Is The Floor Condition In The Warehouse And Environmental Factors? floor Condition Is Good And No Environmental Factors.

Details: Description Invitation To Bid For Payongan Cis Cy 2025 (construction Of Protection Works & Canalization) Alicia, Zamboanga Sibugay 1. The National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office Through The Repair-cis Cy 2025 Intends To Apply The Sum Of Six Million Three Hundred Eleven Thousand Three Pesos And 77/100 Only (php 6,311,003.77) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Niareg9-12102024-repair-ciscy2025-994 (infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office Now Invites Bids For: Item No. Description Quantity Unit I. Temporary Works, Construction And Installation Of Billboard, Construction Plant, Mobilization Of Construction Equipment & Demobilization 1.00 L.s Ii. Construction Safety And Health 1.00 L.s Iii. Protection Works A. Diversion And Care Of River With Dewatering 1.00 L.s B. Structure Excavation (mechanized) 109.00 Cu.m C. Structure Backfill (mechanized) 59.30 Cu.m D. Boulder Riprap (30cm-60cmø) 251.70 Cu.m E. Filter Drain 20.90 Cu.m F. Concrete F.1. Class A Concrete (3000 Psi) - Plain 157.20 Cu.m F.2. Reinforcing Steel Bars (grade 40) - Various Sizes 5,196.40 Kgs. Iv. Canalization A. Embankment (side Borrow With Compaction) 35.20 Cu.m B. Gravel Blanket (gravel Bedding ) 3.00 Cu.m C. Concrete C.1. Class B Concrete (2400 Psi) - Plain 6.30 Cu.m C.2. Reinforcing Steel Bars (grade 40) - 10mm 273.60 Kgs. Total 6,311,003.77 The Above Procurement Project. Completion Of The Works Is Required 150 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A.) Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 16, 2024 To January 6, 2025 At 5:00 Pm From Given Address And Website/s Below National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office, Https://notices.philgeps.gov.ph, Https://region9.nia.gov.ph/content/invitation-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (php 10,000.00 ).the Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Will Be Presented In Person, By Facsimile, Or Through Electronic Means. However, The Interested Bidder Can Purchase The Bidding Documents Only Upon Presentation Of An Original Copy Of Sworn Affidavit Of Site Inspection, And An Original Copy Of A Certificate Of Site Inspection Signed By The Nia Authorized Personnel Or The Irrigators Association President Certifying That The Bidder Has Actually Inspected The Project Site (prescribe Forms Can Be Availed From This Office). Photocopy Is Not Acceptable. Such Affidavit/s And Certificate/s Must Be Submitted For Verification To The Bac Secretariat. 6. The National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office Will Hold A Pre-bid Conference On December 23, 2024 At 2:00 Pm. At National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office , Da-rfoix Research Division Compound, Sanito, Ipil, Zamboanga Sibugay And/or Through Videoconferencing/webcasting Via, Google Meet, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address As Indicated Below, On Or Before January 7, 2025 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 7, 2025 At 9:00 A.m. Zamboanga Sibugay Irrigation Management Office, Da-rfoix Research Division Compound, Sanito, Ipil, Zamboanga Sibugay And/or Through Google Meet, Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Late Bids Shall Not Be Accepted Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. 10. The Minimum Equipment And Manpower Requirement Will Be The Following: Equipment: Equipment Type Unit Capacity Excavator Crawler Type 1 Unit 1 Cu.m Bucket Dumptruck (6-wheeler) 1 Unit 5-6 Cu.m Bagger Mixer 1 Unit 1 Bagger Survey Instrument 1 Set Testing Cylinder (3 Cylinder Per Set) 1 Set Concrete Vibrator 1 Unit Waterpump 4" 2 Units Manpower: Manpower 1 Project Manager 1 Project Engineer 1 Materials Laboratory Technician 1 Safety Officer 1 Office Engineer 1 Survey Team 1 Construction Foreman 1 Heavy Equipment Operator 6 Skilled Workers 1 Driver 11. The National Irrigation Administration – Zamboanga Sibugay Irrigation Management Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Wilson N.cabrales National Irrigation Administration Da-rfoix Research Division Compound, Sanito, Ipil, Zamboanga Sibugay Zsimobac2020@yahoo.com / R9.zamboangasibugay@nia.gov.ph 09488713237 Https://region9.nia.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph Or Https://region9.nia.gov.ph/content/invitation-bid Wilson N. Cabrales (sgd) Bac Chairperson

Details: Sources Sought Notice i. Description Of Intent this Notice Is To Gauge The Availability Of Vendors That Are Capable And Interested In Meeting The Government’s Sustainment Requirements For The Common Robotic System (individual) (crs(i)). The Product Manager Robotic And Autonomous Systems (pdm Ras) Overall Requirement For The Crs(i) Includes All Software To Fulfill Life Cycle Sustainment Support. This Notice Is Also Being Used To Gauge The Availability Of Vendors That Can Provide Software (sw) Development To Address Obsolescence Of Which Foster-miller, Inc Dba Qinetiq North America Is The Original Equipment Manufacturer (oem). ii. General Information: a. Requirement Overview pdm Ras Is Issuing A Sources Sought Notice As A Means Of Conducting Market Research Only To Identify Parties Having An Interest And The Resources To Support This Requirement. The Information Gained Will Be Used For Preliminary Planning And To Determine The Availability Of Qualified Contractors To Provide Crs(i) Software Sustainment Support. The Information Received Will Be Used By The Government To Facilitate The Decision-making Process And, If A Solicitation Is Issued Subsequent To This Notice, Information Received From Respondents Will Aid In The Decision Of Whether To Issue A Solicitation As A Competitive Set-aside For Qualified Small Businesses, Vendors With General Services Administration (gsa) Schedules, Or Whether To Issue A Solicitation As An Unrestricted Full And Open Competition. The Government Assumes No Financial Responsibility For Cost Incurred With Providing Information In Response To This Announcement Or Any Follow-up Information Requests. This Notice Does Not Constitute A Request For Proposal (rfp) And Is Not To Be Construed As A Commitment By The Government For Any Purpose Other Than Market Research. Respondents Will Not Be Notified Of The Results Regarding The Sources Sought. any Subsequent Contract May Be Firm-fixed Price (ffp) With A Period Of Performance Of Up To Ten Years From The Date Of Award. b. Proprietary Information the U.s. Government Appreciates The Time And Effort Taken To Respond To This Survey. The U.s. Government Acknowledges Its Obligations Under 18 U.s.c. §1905 To Protect Information Qualifying As “confidential” Under This Statute. [to Avoid Possible Confusion With The Meaning Of The Term “confidential” In The Context Of Classified Information,” We Will Use The Term “proprietary.”] Pursuant To This Statute, The U.s. Government Is Willing To Accept Any Trade Secret Or Proprietary Restrictions Placed On Qualifying Data Forwarded In Response To The Survey Questions And To Protect It From Unauthorized Disclosure Subject To The Following: 1. Clearly And Conspicuously Mark Qualifying Data With The Restrictive Legend (all Caps) “proprietary” With Any Explanatory Text, So That The U.s. Government Is Clearly Notified Of What Data Needs To Be Appropriately Protected. 2. In Marking Such Data, Please Take Care To Mark Only Those Portions Of The Data Or Materials That Are Truly Confidential (over Breadth In Marking Inappropriate Data As “proprietary” May Diminish Or Eliminate The Usefulness Of Your Response - See Item 6 Below). Use Circling, Underscoring, Highlighting Or Any Other Appropriate Means To Indicate Those Portions Of A Single Page Which Are To Be Protected. 3. The U.s. Government Is Not Obligated To Protect Unmarked Data. Additionally, Marked Data That Is Already In The Public Domain Or In The Possession Of The U.s. Government Or Third Parties, Or Is Afterward Placed Into The Public Domain By The Owner Or Another Party Through No Fault Of The U.s. Government Will Not Be Protected Once In The Public Domain. Data Already In The Possession Of The U.s. Government Will Be Protected In Accordance With The U.s. Government's Rights In The Data. 4. Confidential Data Transmitted Electronically, Whether By Physical Media Or Not, Whether By The Respondent Or By The U.s. Government, Shall Contain The “proprietary” Legend, With Any Explanatory Text, On Both The Cover Of The Transmittal E-mail And At The Beginning Of The File Itself. Where Appropriate For Only Portions Of An Electronic File, Use The Restrictive Legends ‘proprietary Portion Begins:” And “proprietary Portion Ends.” 5. In Any Reproductions Of Technical Data Or Any Portions Thereof Subject To Asserted Restrictions, The U.s. Government Shall Also Reproduce The Asserted Restriction Legend And Any Explanatory Text. 6. The U.s. Government Sometimes Uses Support Contractors In Evaluating Responses. Consequently, Responses That Contain Confidential Information May Receive Only Limited Or No Consideration Since The Respondent’s Marking Of Data As “proprietary” Will Preclude Disclosure Of Same Outside The U.s. Government And Therefore Will Preclude Disclosure To These Support Contractors Assisting The Evaluation Effort. The U.s. Government Will Use Its Best Efforts To Evaluate Those Responses That Contain Confidential Information Without Using Support Contractors Consistent With The Resources Available. iii. Submission Instructions: all Responding To This Notice Shall Provide Specific Information To Include A Summary Of Its Company’s Capabilities. information To Be Provided Shall Include A Capability Statement Which Demonstrates The Skills, Experience, Knowledge, And Capabilities Necessary To Perform The Government’s Requirement To Provide: 1. Development Of Software (sw) To Support Obsolesces And Latent Defects. develop A Software Release And Deliver To The Government For Distribution To Fielded Systems. this Includes: -security Updates To Maintain An Authority To Operate (ato). -software Bugs Or Latent Defects Discovered In Fielded Systems. 2. Support Of Government Tests To Validate Sw Changes. this Includes: - Field Service Representative(s) Support At Government Test Sites. - Providing Any Contractor Test Data. 3. Descriptions Of Procedure Changes And Work Package Callouts And/or Images To Army Technical Manuals As A Result Of Sw Updates. the Capability Statement Should Include: company Name: address: point Of Contact: phone Number: email Address: duns/cage Code: website Address: type Of Organization: Business Type(s): [ ] Large Business (lb), [ ] Small Business (sb), [ ] Hubzone (hz), [ ] Service Disabled Veteran Owned Small Business (sdvosb), [ ] Woman Owned Small Business (wosb), [ ] 8(a) Business Development Program, [ ] Small Disadvantaged Business (sdb), [ ] Veteran Owned Small Business (vosb). 1. A Statement Indicating If Your Company Possesses The Capability To Provide The Entire Range Of Parts And Services For The Robot Called For In This Requirement. Does Your Company Have The Ability To Provide Any, Some, Or All Of The Aspects Identified In This Requirement? Does Your Company Have The Ability To Provide Software Sustainment For Crs(i)? Provide A Table To List Each Service You Are Experienced With And Capable Of Providing. 2. Does Your Company Have Experience As A Prime Contractor Providing The System, Parts And Services Of The Same Or Similar Type Effort(s) (to Include Size And Complexity) Within The Past Five Years? If Yes, Please Provide The Following Information: contract Number(s): dollar Value(s): point Of Contact (poc): poc Email Address: poc Phone Number: brief Description Of Your Direct Support Of The Effort: Similarity Of Scope, Effort, Complexity: 3. Potential Sources Should Only Submit The Minimum Information Necessary And Shall Not Exceed Ten Pages. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Its Submissions. The Government May Contact Potential Sources For Additional Information As Required. 4. Interested Parties Are Encouraged To Be Registered In The System For Award Management, Www.sam.gov Prior To Responding To This Sources Sought Notice. 5. Interested Parties That Consider Themselves Qualified To Perform The Above Listed Requirements Are Invited To Submit A Response To This Sources Sought No Later Than 1300 Est 01/06/2025. 6. Responses To This Sources Sought Notice Shall Be Submitted Via Email To Katherine Klein At Katherine.d.klein2.civ@army.mil.

Details: For The Manufacture Of 017180527 navsup Weapon Systems Support (navsup Wss) Philadelphia Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Eligible Contractors Having An Interest In And The Resources To Manufacture New Spares Or Provide Commercially Certified Overhauled Parts For Commercial Item Nsn 7rh 1560 017180527 P8; P/n 174a0103-13) Used On The P-8a Poseidon Aircraft. It Should Be Noted By Interested Sources That The Government Does Not Have The Rights To, And Thus Cannot Provide Access To, Proprietary Technical Data/drawings That May Be Required For Manufacture This Component. the P-8a Is A Maritime Patrol Aircraft Derived From The Boeing 737-800 Commercial Airliner. although The P-8a Carries Out A Strictly Military Role For The U.s. Navy, Some Items On The Aircraft Are Unmodified 737 Items. These Are Referred To As Commercial Common Items (i.e., Common To The P-8a And 737). They Are Referred To In The Federal Acquisition Regulation As Cots Or Commercial Off The Shelf But Hereinafter Will Be Referred To Simply As Commercial Common. The Requirement Is For An Unmodified Commercial Common Item. navsup Wss Is Seeking Any Eligible Small Business Firms Including Service-disabled Veteran-owned Small Businesses, Certified Hubzone Small Businesses, And Certified 8(a) Capable Of Performing This Manufacture Or Supporting This Requirement. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition. future Requirements Will Only Be Procured From Suppliers Who Provide Faa-certified Parts Which Possess A Faa Authorized Release Certificate, Faa Form 8130-3 Airworthy Approval Tag, From Certified Repair Stations Pursuant To 14 Cfr Part 14. the Awardee Will Be Required To Comply With Contract Clauses From The Federal Acquisition Regulation (far)/defense Federal Acquisition Regulation Supplement (dfars)/navy Marine Corps Acquisition Regulation Supplement (nmcars), Specifically Those Of Far Part 12 Acquisition Of Commercial Items, Dfars Part 212 Acquisition Of Commercial Items And Nmcars 5212 Acquisition Of Commercial Items. eligible Contractors Shall Provide: 1) Company Name And Cage Code 2) Part Number/niin Eligible To Manufacture 3) Is Your Company The Original Equipment Manufacturer (oem)? 4) Is Your Company Capable Of Manufacturing The P/n In No. 2 But Your Company Is Not The Oem? a) Explain How Your Company Has The Technical Capacity To Perform The Necessary Manufacture. 5) Is Your Company A Small Business? If So, What Type Of Small Business? 6) Company Poc the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 8, 2025, 3:00 Pm (eastern Time). all Responses Under This Sources Sought Notice Must Be Emailed To Carolyn.a.clark30.civ@us.navy.mil.

Details: For The Repair Of 017180527 navsup Weapon Systems Support (navsup Wss) Philadelphia Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Eligible Contractors Having An Interest In And The Resources To Manufacture New Spares Or Provide Commercially Certified Overhauled Parts For Commercial Item Nsn 7rh 1560 017180527 P8; P/n 174a0103-13) Used On The P-8a Poseidon Aircraft. It Should Be Noted By Interested Sources That The Government Does Not Have The Rights To, And Thus Cannot Provide Access To, Proprietary Technical Data/drawings That May Be Required For Manufacture This Component. the P-8a Is A Maritime Patrol Aircraft Derived From The Boeing 737-800 Commercial Airliner. although The P-8a Carries Out A Strictly Military Role For The U.s. Navy, Some Items On The Aircraft Are Unmodified 737 Items. These Are Referred To As Commercial Common Items (i.e., Common To The P-8a And 737). They Are Referred To In The Federal Acquisition Regulation As Cots Or Commercial Off The Shelf But Hereinafter Will Be Referred To Simply As Commercial Common. The Requirement Is For An Unmodified Commercial Common Item. navsup Wss Is Seeking Any Eligible Small Business Firms Including Service-disabled Veteran-owned Small Businesses, Certified Hubzone Small Businesses, And Certified 8(a) Capable Of Performing This Manufacture Or Supporting This Requirement. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition. this Requirement Will Only Be Procured From A Supplier Who Provides faa-certified Parts Which Possess A Faa Authorized Release Certificate, faa Form 8130-3 Airworthy Approval Tag, From Certified Repair Stations pursuant To 14 Cfr Part 14. the Awardee Will Be Required To Comply With Contract Clauses From The Federal Acquisition Regulation (far)/defense Federal Acquisition Regulation Supplement (dfars)/navy Marine Corps Acquisition Regulation Supplement (nmcars), Specifically Those Of Far Part 12 Acquisition Of Commercial Items, Dfars Part 212 Acquisition Of Commercial Items And Nmcars 5212 Acquisition Of Commercial Items. eligible Contractors Shall Provide: 1) Company Name And Cage Code 2) Part Number/niin Eligible To Manufacture 3) Is Your Company The Original Equipment Manufacturer (oem)? 4) Is Your Company Capable Of Manufacturing The P/n In Number 2 But Your Company Is Not The Oem? a) Explain How Your Company Has The Technical Capacity To Perform The Necessary Manufacture. 5) Is Your Company A Small Business? If So, What Type Of Small Business? 6) Company Poc the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 8, 2025, 3:00 Pm (eastern Time). all Responses Under This Sources Sought Notice Must Be Emailed To Carolyn.a.clark30.civ@us.navy.mil.

Details: The Defense Logistics Agency (dla) - Richmond Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For An Fairing, Fuel Tank. The Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. if Your Organization Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, Emails Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. [note: In Accordance With Far 10.001(b), Agencies Should Not Request Potential Sources To Submit More Than The Minimum Information Necessary.] the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To 1) Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated; 2) Secure And Apply The Full Range Of Corporate Financial, Human Capital, And Technical Resources Required To Successfully Perform Similar Requirements; 3) Implement A Successful Project Management Plan That Includes: Compliance With Tight Program Schedules; Cost Containment; Meeting And Tracking Performance; Hiring And Retention Of Key Personnel And Risk Mitigation; And 4) Provide Services Under A Performance Based Service Acquisition Contract. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition, And Multiple Awards May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By 3:00 Pm, Est., January 6, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Melinda.johnson@dla.mil. if You Have Any Questions Concerning This Opportunity, Please Contact: Melinda Johnson At Melinda.johnson@dla.mil. this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. purpose And Objectives potential Sources Shall Be Capable Of Furnishing All Labor, Materials, Facilities And Equipment Required To Accomplish The New Manufacture Of The Item(s). Generally, This Entails The Procurement/manufacture Of Component Parts, Inspection, Testing, Preservation/packaging, And Shipping. Additionally, Potential Sources May Be Responsible For Supply Chain Management, Logistics Planning, Forecasting Production Requirements, Long-lead Time Parts Procurement, Diminishing Manufacturing Sources And Material Shortage Issues, And Shipping Serviceable Assets. The Unit Prices Will Be Established At The Time Of A Contract Award. the Specific Requirement For This Effort Is Below: part Number: 65205-08025-041 nomenclature: Fairing, Fuel Tank nsn: 1560-008904160 estimated Requirement: 190 Each

Description: Sources Sought automated Mat Casting At Richardson Landing, Tn introduction: This Is A Sources Sought Announcement; A Market Survey For Information Only, To Be Used For Planning Purposes. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded From This Announcement. the Government Is Seeking Qualified, Experienced Sources Capable Of Executing A Design Build Contract To Develop An Automated Casting Plant At Richardson Landing To Mass Produce Articulated Concrete Mattress (acm) Squares To Government Specifications Within Specific Tolerances. Squares Cast Will Be Stored On The Current Casting Field And Have Must Have A Compressive Design Strength Of 3,000 Psi At 28 Days. background: Annually, The United States Army Corps Of Engineers (usace) Mississippi Valley Division Casts Approximately 150,000 Squares Of Acm At 3 Government Furnished Locations (see Figure 1). The Acm Is Used As Revetment To Maintain Channel Stability For The Lower Mississippi River. Casting Acm Has Historically Been Provided Via Manual Labor And Cast Outdoors As Weather Permits. articulated Concrete Mattress – Current Process: an Articulated Concrete Mattress Square Consists Of 16 Individual Concrete Blocks (4 Feet X 18 Inches X 3 Inches Thick). They Are Currently Cast In Government Furnished Forms Upon A Proprietary Wire Mesh To Form An Articulated Concrete Mattress Square (4 Feet X 25 Feet X 3 Inches) That Is Used As An Assembly System For Interconnecting The 16 Concrete Blocks. A Mix Design Is Used To Acquire 3,000 Psi On A 28-day Cylinder Break. squares Of Mattress Are Cast In Stacks Of 13 That Are Neatly Aligned Vertically And By Rows (see Figure 2). One Layer Of Specified Paper Is Placed As A Separation Beneath The Bottom Square Of Each Stack And Between Each Successive Layer Of Mattress. The Current Process Requires The Wire Mesh To Be Placed On The Paper With The Cross Wires (bracket Wires) On Top Of The Longitudinal Wires. The Forms Are Then Placed Over The Wire Mesh, The Wire Mesh Drawn Up Into The Notches In The Sides And Cross Pieces Of The Forms, And Cross Rods Driven. The Central Location Of The Wire Mesh In The Form Is Very Important. Also, The Mat Surface Is Consequently Grooved To Provide Indentations Of Approximately 1/4 Inch In Depth And 1/8-inch Width. the Process Includes The Concrete Compacted To The Depth Of A Government Furnished Form By The Use Of Vibration. The Concrete Is Properly Consolidated With No Rock Pockets, Excessive Voids Or Honeycombs Visible On The Mat Surface. The Concrete Is Struck Flush With The Top Of The Forms And Given A Uniform Surface Finish And Uniform Thickness. Any Squares Not Meeting Government Furnished Specifications Are Rejected. requirements: the Contractor Shall Design And Develop A Semi-automated Casting Facility On The Grounds Of The Exiting Government Casting Yard That Can Produce A Minimum Of 50,000 Squares Per Calendar Year Per Shift With The Maximum Capability Of 150,000 Squares Annually With 3 Shifts. The Main Goals Of This Project Include: year-round, Indoor Casting Capability With No Weather-related Quality Issues During Production scalable Based On Number Of Operating Shifts reduced Touchpoints Via Automation high Quality, Increased Production, Improved Efficiency And Consistency improved Safety skilled Labor And Reduced Work Force require Fewer Forms (improved Consistency) heat/steam Curing To Reduce Cement Usage, Decrease Co2, And Higher Strength In A Shorter Timeframe modern Batching System Will Be More Efficient And Provide A Constant Mix Design eliminate The Use Of Separation Paper Between Squares the New Automated Facility Will Cast Acm Using Coarse And Fine Aggregate, Portland Cement, Fly Ash, Air-entraining Admixtures, And Calcium Chloride To Produce Articulated Concrete Squares, To Government Specifications. Squares Of Mattress Shall Be Provided In Stacks Of Up To 14 That Are Neatly Aligned Vertically And Will Be Placed In The Storage Yard In Rows By The Operational Contractor Using Government Furnished High Lift Cranes. Squares Cast Will Be Identical With Minimal Tolerance And Have Compressive Design Strength Of 3,000 Psi At 28 Days. Quality Is The Utmost Importance. Steam Curing And Other Technologies For Concrete Preparation Will Be Included While The Overall Design And Specifications Of The Mattress Will Remain The Same. the Design Of The Automated Facility Will Be Part Of The Contract And Will Ensure That The Facility Design Has Been Adequately Coordinated Between All Disciplines. Specifically, The Capacity Of The Infrastructure Within The Facility Shall Be Designed To Meet The Demands Of The Equipment Within The Facility. The Design Will Be A Two-phase Design Build Project And Will Require The Contractor To Procure Automation Equipment That Meets All “buy American” Requirements And The Design Will Meet All Required Policies For A Dod Facility. Several Of The Main Required Policies Are Listed Below: department Of Defense (2019). Unified Facilities Criteria, Facilities Criteria And Unified Facilities Guide Specifications, Mil-std-3007g. department Of Defense (2024). Dod Building Code, Ufc 1-200-01. department Of The Army (1999). Engineering And Design For Civil Works Projects, Er 1110-2-1150. department Of The Army (2024). Safety And Occupational Health (soh) Requirements, Em 385-1-1. dod Design Criteria: Https://www.wbdg.org/ffc/dod/unified-facilities-criteria-ufc all Designs Shall Be In Accordance With All Local, State, And Federal Laws And Regulations. interested Firms Should Submit A Capabilities Package To Include The Following: The Prime Firm And/or Its Subcontractor(s) (hereinafter Referred To Collectively As “firm”) Shall Have Relevant Experience In Mass Production Of Casting Concrete Products. The Firm Shall Demonstrate Experience Using Pre-cast Concrete. This Experience Must Have Been Performed Within The Last Five Years. firm’s Response To This Synopsis Shall Be Limited To 10 Pages And Shall Include The Following Information: firm’s Name, Address, Point Of Contact, Phone Number And E-mail Address. firm’s Prior Experience In Pre-cast Concrete. firm’s Capability To Perform A Contract Of This Magnitude (> $20m) And Complexity. firm’s Business Size (small Business, Large Business, .etc.) And Bonding Capacity. firms Overall Approach To The Requirements Listed Above. the Firm’s Capability For Performing A Design Build Contract For The Entirety Of This Requirement (facility And Equipment). any Assumptions Or Constraints In The Overall Execution Plan. a Rough Order Of Magnitude (rom) Estimate For The Completed Project. interested Firm’s Shall Respond To This Sources Sought Announcement No Later Than 12:00pm Cst, 5 January 2025. All Interested Firms Must Be Registered In Sam. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow Up Information Requests. Respondents Will Not Be Notified Of The Results Of The Evaluation.

Details: The Department Of The Air Force, 325th Contracting Squadron (cons), Is Seeking Sources For Contemplated Eod Support Service At Tyndall Air Force Base. Please See The Attached Draft Performance Work Statement (pws). disclaimer: this Sources Sought Notice Is For Informational Purposes Only And Is Not A Request For Quotation. The Purpose Of This Notice Is To Conduct Market Research In Accordance With Federal Acquisition Regulation (far) Part 10 To Determine The Availability And Capability Of Businesses To Provide This Service At Tyndall Air Force Base, Florida. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. The Government Will Not Be Responsible For Any Costs Incurred By Interested Parties In Responding To This Notice. Any Information Submitted By Respondents Is Strictly Voluntary. Contact With Other Than 325 Cons Government Personnel By Potential Offerors Or Their Employees Regarding This Project Is Prohibited. the Tentative Solicitation Issue Date Is To Be Determined. Any Future Solicitation Will Be Made Available Only On Sam.gov. Interested Parties Are Solely Responsible For Monitoring The Aforementioned Website For The Release Of A Solicitation Package And/or Any Updates And/or Amendments. north American Industry Classification System (naics) Code: the Anticipated North American Industry Classification System Code (naics) For This Requirement Is 541690 – Other Scientific And Technical Consulting Services. vendor Response/required Capabilities: it Is Requested That Vendors Respond To This Sources Sought Notice With Information In Sufficient Detail Regarding Their Capabilities And Capacity To Satisfy The Requirement. The Government Is Contemplating A Firm-fixed-price Contract (ffp) As The Appropriate Contract Type Applicable To The Requirement. see The Attached Draft Performance Work Statement (pws). A Final Pws Will Be Issued At The Time Of Solicitation (date: Tbd). Potential Offerors Are Encouraged To Provide Feedback On The Draft Pws Content. The Government May Not Respond To Or Publish Comments, Resulting Actions, Changes, Etc; However, The Draft Pws May Or May Not Be Revised Based On Feedback Provided. Potential Offerors Are Cautioned That Proposals Must Be Based On The Actual Rfp, Once Posted, And Not Posted Draft Documents. submission Details/information Sought By The Government: 1. Your General Company Information To Include: Company Names, Address, Point Of Contact, Phone Number, E-mail Address, Commercial And Government Entity (cage) Code, Unique Entity Id, Business Size (i.e., Small Business, Other Than Small), And Naics Code(s) The Company Usually Performs Under. 2. Capabilities Statement Providing Sufficient Information Describing Ability To Perform Eod Support Services On Tyndall Afb. 3. Interested Parties Are Encouraged To Provide Feedback In The Attached Comment Spreadsheet In Regard To The (draft) Performance Work Statement. note: Any Prospective Contractor Must Be Registered In The System For Award Management (sam) In Order To Be Eligible For Award. The Website Is Https://www.sam.gov. Registration Requires Applicants To Have A Unique Entity Id. Registration May Take Up To Three Weeks To Process. all Submissions Must Be Received No Later Than 1:00 Pm Central Time On Friday, 03 Jan, 2025. Packages Can Be Sent Electronically To Ssgt Rebecca Cudjoe At Rebecca.cudjoe@us.af.mil And Mr. David Hackney At David.hackney.1@us.af.mil. Oral And Mailed Communications Are Not Acceptable In Response To This Notice. the Government Will Not Provide A Debriefing On The Results Of The Survey. All Information Submitted Will Be Held In A Confidential Manner And Will Only Be Used For The Purpose Intended.

Details: The Government Has A Requirement For Hotel Room Refrigerators (347 Each) And Combination Fridge/microwaves (13 Each) At Tyndall Afb, Fl. The Government Is Searching For Buy-american Act (baa) Compliant Appliances That Meet The Requirements Below. refrigerators: The Specifications Provided A 3.1 Mf7r Microfridge A 3.1 Cubic Ft. Refrigerator As An Example. The Government Has Been Unable To Find A Baa Compliant Refrigerator. The Construction Contractor Has Proposed The Same Make And Model As They Are Unable To Locate A Baa Compliant Model With Similar Specifications. The Microfridge Refrigerator/freezer Has These Features, 33"h X 18" W X 19"d, 1 Full-width Wire Shelf, 2 3/4" Width Door Shelves, Temperature Control, Manual Defrost, Transparent Crisper, White Interior, Environmentally Friendly, Freezer, And Ada Compliant. combination Fridge/microwaves: The Specifications Provided A 2.5mf4e-7d1 Microfridge Combination Appliance As An Example. The Government Has Been Unable To Find A Baa Compliant Appliance. The Construction Contractor Has Proposed Dimensions Approximately The Same Make And Model As They Are Unable To Locate A Baa Compliant Model With Similar Specifications. The Microfridge Combination Appliance Features, Refrigerator: 18 11/16"w X 19 11/16"d X 10 9/16"h, 1 Full-width Wire Shelf, 2 3/4" Width Door Shelves, Temperature Control, Manual Defrost, Transparent Crisper, White Interior, E-star Rated, Ada Compliant, 3.10 Cu Ft Total Capacity; Microwave: 18 2/16"w X 14 7/16"d X 10 9/16"h, Internal Smoke Sensor, Usb Charging Station W/ 4 Amps Max For The (2) Usb Ports And (1) Charging Station, Easy-grip Pull Door, Express Cook Settings, Programmed Cooking Options, Led Display And Clock, Signal Beeper W/ Adjustable Volume, Removable 10 11/16" Glass Carousel. this Request Is Not A Request To Be Placed On A Solicitation Mailing List. It Is For Information Only And Is Not A Request For Proposal (rfp) Or Announcement Of A Solicitation. The Purpose Of This Notice Is To Understand The Market For Alternative Suppliers Of The Items Described Above. This Notice Is Not A Request For Competitive Proposals; However, All Information Received By The Date Indicated In This Notice Will Be Considered By The Government. A Determination By The Government To Grant An Exception To Baa Requirements Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. The U.s. Army Corps Of Engineers, Directorate Of Contracting, Is Conducting A Market Survey To Identify Alternate Sources. Respondent Firms Shall Provide: 1. Manufacturer's Name And Unique Entity Identifier (uei) If Applicable. 2. Product Data And Written Statement Of The Ability Of Firm’s Alternative Product To Be Used In Place Of The Referenced Product Above For The Equipment Specified. 3.the Written Statement Of Compliance Shall Include Necessary Backup Design Information And Supporting Documentation. A List Of Projects In Which The Manufacturer Has Met Similar Requirements For Similar Applications Shall Be Provided. The List Shall Include The Exact Location Of Project(s) And A Point Of Contact With Phone Numbers. The Government Will Not Pay For Any Material Provided In Response To This Notice Nor Return The Data Provided. 4. Responses Should Be Sent To Eric.j.hurtado@usace.army.mil No Later Than Stated Response Time. No Other Forms Of Transmission Are Requested Or Will Be Accepted.

Details: Sources Sought the U.s. Army Corps Of Engineers (usace), Jacksonville District, Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest And The Resources To Support A Requirement For Operations And Maintenance (o&m), Operations, Maintenance, Repair, Replacement, Rehabilitation (omrrr) And Operational Testing (ot) Of Features For Ecosystem Restoration, Flood Control An Other Civil Works Projects. Refer To The Draft Performance Work Statement (pws) Attached To This Synopsis For A Detailed Description Of The Requirement. the Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 561210 – Facilities Support Services, With A Size Standard Of $47m. there Is No Solicitation Currently. This Request For Capability Information Does Not Constitute A Request For Proposals. Submission Of Any Information In Response To This Market Survey Is Purely Voluntary. The Government Assumes No Financial Responsibility For Any Costs Incurred. the Purpose Of This Synopsis Is To Gain Knowledge Of Interest, Capabilities, And Qualifications Of Various Members Of Industry, Namely The Entire Contractor Community, To Include Other Than Small Business, Small Business, 8(a) Program Participant, Service-disabled Veteran-owned Small Business (sdvosb), Women-owned (wosb) And Historically Underutilized (hubzone) Concerns. The Government Must Ensure There Is Adequate Competition Among The Potential Pool Of Responsible Contractors. the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. this Sources Sought Synopsis Is Not A Request For Competitive Offers And No Solicitation Package Is Available. However, Firms That Believe They Can Provide The Requested Services May Submit Substantiating Documentation In Writing Within Thirty (30) Days Of This Notice. Documentation Will Be Evaluated Solely For The Purpose Of Determining Whether To Conduct This Procurement On A Competitive Basis. oral Communications Are Not Acceptable In Response To This Notice. submission Instructions interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Synopsis By 6 January 2024 At 12pm Eastern Standard Time (est). All Responses Under This Sources Sought Notice Shall Be Emailed To Brittany Jackson At Brittany.r.jackson@usace.army.mil And Dustin Furrey At Dustin.l.furrey@usace.army.mil. a Firm’s Response To This Synopsis Shall Be Limited To 10 Pages And Shall Include The Following Information: firm’s Name, Address, Point Of Contact, Phone Number, Website, And Email Address. firm’s Interest In Bidding On The Solicitation When It Is Issued. firm’s Capability To Perform A Contract Of This Magnitude And Complexity (include Firm’s Capability To Execute Comparable Work Performed Within The Past Three (3) Years: This May And Should Be Tailored Specifically To The Project. brief Description Of The Project, Customer Name, Timeliness Of Performance, Customer Satisfaction, And Dollar Value Of The Project) – Provide At Least Three (3) Examples. firm’s Business Category And Business Size – Other Than Small, Small Business, 8(a), Sdvosb, Wosb, Or Hubzone. If Your Firm Is A Small Business, Be Sure You Understand The Performance Of Work Requirements For Your Specific Socioeconomic Category (i.e. Sb, 8(a), Sdvosb, Wosb, Or Hubzone). if Significant Subcontracting Or Teaming Is Anticipated To Deliver Technical Capability, Firms Should Address The Structure Of Such Arrangements To Include Joint Venture Information If Applicable – Existing And Potential. prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. you Must Be Registered With The System For Award Management (sam) To Receive A Government Contract Award. To Register, Go To Www.sam.gov. if You Have Any Questions Concerning This Opportunity, Please Contact: Brittany Jackson At Brittany.r.jackson@usace.army.mil And Dustin Furrey At Dustin.l.furrey@usace.army.mil.