Survey Tenders

Details: The Purpose Of Amendment No. 0001, To Solicitation 697dck-25-r-00008 For Ground Maintenance Services For The Jacksonville Air Route Traffic Control Center (artcc) Is Being Released To: 1) Post The Responses To The Questions Received, See Attachment J-5. no Further Changes For Amendment No. 0001. ___________________________________________________________________________________________________ the Federal Aviation Administration (faa) Has A Requirement For A Ground Maintenance Services At The Jacksonvilleair Route Traffic Control Center (artcc). This Is A Firm-fixed Price (ffp) Procurement, Competed As A 100% Set-aside For Service-disabled Veteran-owned Small Businesses (sdvosb) Under North American Industry Classification System (naics) Code 561730 – Landscaping Services. performance Begins 03/01/2025 For The Base Year Plus Four (4) Option Years. timeline site Visit Information – An Optional Site Visit Iaw Ams Clause Sa30, Is Scheduled For The Date Below. Attendance Is Encouraged, But Not Mandatory. To Attend The Site Visit, Advance Registration Is Required By 01/03/2025 At 1700 Pm Est To Matina Jackson At Matina.l.jackson@faa.gov And Patricia Mogck At Patricia.mogck@faa.gov, Using The Subject Line: Site Visit Request For 697dck-25-r-00008. please Provide Name Of Company And The Name Of Each Person Attending The Site Visit. An Email With Instructions Regarding The Site Visit Will Be Provided Following Acceptance Of Your Request. Attendance To The Site Visit Is Limited To Only Two (2) Representatives Per Company. optional Site Visit: Wednesday,01/08/2025 At 0900 Am Est questions Close: Friday, 01/10/2025 At 1300 Pm Est proposal And Customer satisfaction Surveys Due: Wednesday, 01/22/2025 At 1300 Pm Est award Of Contract: Tbd performance Begins: March1, 2025

Details: For The Manufacture Of 015887448 navsup Weapon Systems Support (navsup Wss) Philadelphia Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Eligible Contractors Having An Interest In And The Resources To Manufacture New Spares Or Provide Commercially Certified Overhauled Parts For Commercial Item Nsn 7rh 1680 015887448 P8; P/n 96043-03) Used On The P-8a Poseidon Aircraft. It Should Be Noted By Interested Sources That The Government Does Not Have The Rights To, And Thus Cannot Provide Access To, Proprietary Technical Data/drawings That May Be Required For Manufacture This Component. the P-8a Is A Maritime Patrol Aircraft Derived From The Boeing 737-800 Commercial Airliner. although The P-8a Carries Out A Strictly Military Role For The U.s. Navy, Some Items On The Aircraft Are Unmodified 737 Items. These Are Referred To As Commercial Common Items (i.e., Common To The P-8a And 737). They Are Referred To In The Federal Acquisition Regulation As Cots Or Commercial Off The Shelf But Hereinafter Will Be Referred To Simply As Commercial Common. The Requirement Is For An Unmodified Commercial Common Item. navsup Wss Is Seeking Any Eligible Small Business Firms Including Service-disabled Veteran-owned Small Businesses, Certified Hubzone Small Businesses, And Certified 8(a) Capable Of Performing This Manufacture Or Supporting This Requirement. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition. future Requirements Will Only Be Procured From Suppliers Who Provide Faa-certified Parts Which Possess A Faa Authorized Release Certificate, Faa Form 8130-3 Airworthy Approval Tag, From Certified Repair Stations Pursuant To 14 Cfr Part 14. the Awardee Will Be Required To Comply With Contract Clauses From The Federal Acquisition Regulation (far)/defense Federal Acquisition Regulation Supplement (dfars)/navy Marine Corps Acquisition Regulation Supplement (nmcars), Specifically Those Of Far Part 12 Acquisition Of Commercial Items, Dfars Part 212 - Acquisition Of Commercial Items And Nmcars 5212 - Acquisition Of Commercial Items. eligible Contractors Shall Provide: 1) Company Name And Cage Code 2) Part Number/niin Eligible To Manufacture 3) Is Your Company The Original Equipment Manufacturer (oem)? 4) Is Your Company Capable Of Manufacturing The P/n In No. 2 But Your Company Is Not The Oem? a) Explain How Your Company Has The Technical Capacity To Perform The Necessary Manufacture. 5) Is Your Company A Small Business? If So, What Type Of Small Business? 6) Company Poc the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 10, 2025, 3:00 Pm (eastern Time). all Responses Under This Sources Sought Notice Must Be Emailed To Carolyn.a.clark30.civ@us.navy.mil.

Details: For The Manufacture Of 017180527 navsup Weapon Systems Support (navsup Wss) Philadelphia Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Eligible Contractors Having An Interest In And The Resources To Manufacture New Spares Or Provide Commercially Certified Overhauled Parts For Commercial Item Nsn 7rh 1560 017180527 P8; P/n 174a0103-13) Used On The P-8a Poseidon Aircraft. It Should Be Noted By Interested Sources That The Government Does Not Have The Rights To, And Thus Cannot Provide Access To, Proprietary Technical Data/drawings That May Be Required For Manufacture This Component. the P-8a Is A Maritime Patrol Aircraft Derived From The Boeing 737-800 Commercial Airliner. although The P-8a Carries Out A Strictly Military Role For The U.s. Navy, Some Items On The Aircraft Are Unmodified 737 Items. These Are Referred To As Commercial Common Items (i.e., Common To The P-8a And 737). They Are Referred To In The Federal Acquisition Regulation As Cots Or Commercial Off The Shelf But Hereinafter Will Be Referred To Simply As Commercial Common. The Requirement Is For An Unmodified Commercial Common Item. navsup Wss Is Seeking Any Eligible Small Business Firms Including Service-disabled Veteran-owned Small Businesses, Certified Hubzone Small Businesses, And Certified 8(a) Capable Of Performing This Manufacture Or Supporting This Requirement. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition. future Requirements Will Only Be Procured From Suppliers Who Provide Faa-certified Parts Which Possess A Faa Authorized Release Certificate, Faa Form 8130-3 Airworthy Approval Tag, From Certified Repair Stations Pursuant To 14 Cfr Part 14. the Awardee Will Be Required To Comply With Contract Clauses From The Federal Acquisition Regulation (far)/defense Federal Acquisition Regulation Supplement (dfars)/navy Marine Corps Acquisition Regulation Supplement (nmcars), Specifically Those Of Far Part 12 Acquisition Of Commercial Items, Dfars Part 212 Acquisition Of Commercial Items And Nmcars 5212 Acquisition Of Commercial Items. eligible Contractors Shall Provide: 1) Company Name And Cage Code 2) Part Number/niin Eligible To Manufacture 3) Is Your Company The Original Equipment Manufacturer (oem)? 4) Is Your Company Capable Of Manufacturing The P/n In No. 2 But Your Company Is Not The Oem? a) Explain How Your Company Has The Technical Capacity To Perform The Necessary Manufacture. 5) Is Your Company A Small Business? If So, What Type Of Small Business? 6) Company Poc the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 8, 2025, 3:00 Pm (eastern Time). all Responses Under This Sources Sought Notice Must Be Emailed To Carolyn.a.clark30.civ@us.navy.mil.

Details: For The Repair Of 017180527 navsup Weapon Systems Support (navsup Wss) Philadelphia Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Eligible Contractors Having An Interest In And The Resources To Manufacture New Spares Or Provide Commercially Certified Overhauled Parts For Commercial Item Nsn 7rh 1560 017180527 P8; P/n 174a0103-13) Used On The P-8a Poseidon Aircraft. It Should Be Noted By Interested Sources That The Government Does Not Have The Rights To, And Thus Cannot Provide Access To, Proprietary Technical Data/drawings That May Be Required For Manufacture This Component. the P-8a Is A Maritime Patrol Aircraft Derived From The Boeing 737-800 Commercial Airliner. although The P-8a Carries Out A Strictly Military Role For The U.s. Navy, Some Items On The Aircraft Are Unmodified 737 Items. These Are Referred To As Commercial Common Items (i.e., Common To The P-8a And 737). They Are Referred To In The Federal Acquisition Regulation As Cots Or Commercial Off The Shelf But Hereinafter Will Be Referred To Simply As Commercial Common. The Requirement Is For An Unmodified Commercial Common Item. navsup Wss Is Seeking Any Eligible Small Business Firms Including Service-disabled Veteran-owned Small Businesses, Certified Hubzone Small Businesses, And Certified 8(a) Capable Of Performing This Manufacture Or Supporting This Requirement. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition. this Requirement Will Only Be Procured From A Supplier Who Provides faa-certified Parts Which Possess A Faa Authorized Release Certificate, faa Form 8130-3 Airworthy Approval Tag, From Certified Repair Stations pursuant To 14 Cfr Part 14. the Awardee Will Be Required To Comply With Contract Clauses From The Federal Acquisition Regulation (far)/defense Federal Acquisition Regulation Supplement (dfars)/navy Marine Corps Acquisition Regulation Supplement (nmcars), Specifically Those Of Far Part 12 Acquisition Of Commercial Items, Dfars Part 212 Acquisition Of Commercial Items And Nmcars 5212 Acquisition Of Commercial Items. eligible Contractors Shall Provide: 1) Company Name And Cage Code 2) Part Number/niin Eligible To Manufacture 3) Is Your Company The Original Equipment Manufacturer (oem)? 4) Is Your Company Capable Of Manufacturing The P/n In Number 2 But Your Company Is Not The Oem? a) Explain How Your Company Has The Technical Capacity To Perform The Necessary Manufacture. 5) Is Your Company A Small Business? If So, What Type Of Small Business? 6) Company Poc the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 8, 2025, 3:00 Pm (eastern Time). all Responses Under This Sources Sought Notice Must Be Emailed To Carolyn.a.clark30.civ@us.navy.mil.

Details: Sources Sought: W9128f25sm009 general. This Is A Sources Sought Notification For Informational/market Research Purposes Only. This Is Not A Request For Proposal, Quotation Or Bid, Nor A Synopsis Of A Proposed Contract Action Under Far Subpart 5.2. notice Details. The U.s. Army Corps Of Engineers (usace), Northwestern Division, Omaha District (cenwo) Has Been Tasked To Identify Interest In A Design-build Contract For Construction Services As Defined Below In Support Of Cenwo’s Design And Construction Effort At The Fort Harrison Veteran’s Affairs Medical Center (vamc), Ft Harrison, Mt. Responses To This Sources Sought Announcement Will Be Used By The Government To Determine The Appropriate Level Of Small Business Participation And To Develop The Acquisition Strategy. The North American Industrial Classification Code (naics) For This Requirement Is: 236220, “commercial And Institutional Building Construction”. The Related Size Standard Is: $45m. the Purpose Of This Sources Sought Notice Is To Gather Information On The Interest, Capabilities, And Qualifications Of Small And Large Businesses In The Industry, Alongside Collecting Data On The Recent History Of Construction Projects Within The Local Labor Market. This Notice Supersedes All Previous Requests For Cenwo’s Design And Construction Efforts At Fort Harrison. This Effort Targets: small Businesses (sb small Disadvantaged Businesses, Including 8(a) Firms historically Underutilized Business Zones (hubzone) economically Disadvantaged Women-owned Small Businesses (edwosb) service-disabled Veteran-owned Small Businesses (sdvosb) other Than Small Businesses (otsb) all Potentially Interested Parties Are Strongly Encouraged To Submit Responses. project Scope. Cenwo Intends To Procure Design-build Services For The Construction Of A New Central Utility Plant (cup) At The Fort Harrison, Mt Veterans Affairs Medical Center (vamc), Enhancing Campus Utility Services. This Initiative Represents A Significant Upgrade To The Vamc's Infrastructure, Promising Improved Efficiency, Reliability, And Sustainability Of Utility Services Across The Campus. current Status: Design And Planning Activities Are In Progress To Refine The Design-build Request For Proposal (rfp). new Construction: The Project Involves Building A New Cup With An Approximate Gross Square Footage (gsf) Of 15,300, Located North Of The Main Hospital Building. utility System: Establishment Of A Comprehensive Utilities Distribution System. demolition And Modifications: demolition Or Modification Of Existing Campus Heating, Hot Water, And Chilled Water Systems. demolition Of The Old Boiler Plant And Associated Backup Generator Buildings To Clear Space For New Developments. project Magnitude: The Construction Cost Is Projected To Range Between $25,000,000 And $100,000,000. timeline: The Estimated Duration From The Notice To Proceed (ntp) For Construction Is 1,277 Calendar Days. general Site Conditions: This Site Offers Both Challenges And Opportunities For Development, Given Its Proximity To Key Campus Facilities, Existing Infrastructure, And The Natural Slope Of The Land Which Must Be Considered For Effective Water Management And Site Planning. location: The Site Is Positioned Near The Property Line Abutting The National Guard Installation To The North, With The Existing B170 Warehouse Building To The West, And An Anticipated Parking Garage And Outpatient Mental Health Facility (to Be Constructed By Others) To The East. land Use: The Site Partially Overlaps With An Existing Parking Lot And Extends Into Undeveloped, Naturally Vegetated Land. topography: The Terrain Slopes From West To East, With Surface Water Runoff Characterized Predominantly By Sheet Flow; There Are No Significant Concentrated Flow Paths Within The Project Area. storage And Temporary Structures: The Area May Occasionally Host Shipping Containers, Either On Or Near The Site, Influencing Site Planning And Access Considerations. drainage And Roadways: Most Of The Campus Features Open-section Roadways Without Curbs Or Gutters, Except Around The Main Hospital Where Traditional Curb And Gutter Systems Are In Place. utilities: existing Infrastructure: The Site Is Crossed By Several Utility Services Including Sanitary Sewer, Signal/telecom, And Water Lines, Which Could Support Further Development. lighting: There Are Light Poles Along The Parking Lot's Perimeter, Potentially Affecting Lighting Design For New Constructions. landscaping: While The Hospital Area Is Characterized By Irrigated Turfgrass, This Feature Does Not Extend To The Project Site, Maintaining A More Natural Landscape. central Utility Plant: The Building's Design For The (cup Shall Focus On: accessibility: The Structural Engineering Of The Cup Emphasizes Accessibility, Providing Easy Access For Maintenance Of Overhead Piping And Duct Systems, And Accommodating Future Equipment Installations Or Removals. dimensions: The Structure Is Assumed To Be Approximately 30 Feet In Height And 15,300 Gross Square Feet In Area. construction Materials: Utilizes Load-bearing Concrete Masonry Unit (cmu) Walls, Finished With An Exterior Face Brick That Aligns With The Campus's Architectural Style. rain-screen System: Employed Across All Exterior Walls To Effectively Control Moisture: components: Includes An Outer Brick Veneer, An Intermediate Air Space For Drainage, Rigid Insulation For Thermal Resistance, And A Vapor Barrier Directly On The Cmu To Prevent Moisture Ingress. composite Metal Panels: Strategically Placed To Offer Visual Distinction Or Meet Specific Functional Requirements, These Panels Also Incorporate A Rain-screen System For Moisture Management. aesthetic And Functional Integration: The Building's Design Shall Not Only Blend With The Existing Campus Architecture But Also Support Operational Efficiency. durability And Maintenance: The Use Of Modern Construction Techniques And Materials Ensures The Structure's Longevity And Ease Of Maintenance, Adhering To Contemporary Standards For Energy Efficiency And Building Performance. utilities Distribution System: The Distribution System For The New Cup Shall Be Engineered To Integrate With Both The Future Hospital Complex And The Existing Steam And Chilled Water Systems. The Main Connection From The Cup To The Main Hospital (building 154) Will Occur Via The Primary Utilidor, Terminating At Mechanical Room B100 In The Building's Basement. From Here, Utility Piping Will Connect To Final Equipment Points Either Through Secondary Utilidors, The Crawl Space Beneath Building 154, Or By Routing Through Other Existing Buildings. The Bulk Oxygen Tank And Distribution System Must Also Be Relocated From Its Current Location On Patriot’s Way, To A New Slab Located Near Building 170 (warehouse), And New Connections To And Through The Primary Utilidor Must Be Made To Building 154. This System Is Primarily Routed Through New Underground Utility Corridors, Approximately 8 Feet By 8 Feet, And Extends Into Existing Structures To Serve The Heating, Cooling, And Domestic Hot Water Requirements Of Several Buildings: building 141, Including The Hydronic Plant building 154 building 154a building 169 future Building 173 in Addition To The Main Utility Conduits For Steam, Steam Condensate, And Chilled Water, The Utilidors Will Be Equipped With: lighting: To Ensure Safe Working Conditions. ventilation: To Maintain Air Quality Within The Corridors. drainage: As Mandated By Building Codes To Handle Potential Leaks Or Moisture. the Design Of The Utilidors Will Prioritize Safety, Providing Adequate Space For Maintenance And Operations Personnel. building System Connection And Demolition: This Approach Ensures That The New Utility Systems Are Effectively Integrated While Maintaining Or Improving The Operational Capabilities Of The Existing Infrastructure. steam Utility Connections: New Steam Utilities From The Cup Will Be Integrated With The Existing Steam Systems Within The Buildings, Ensuring A Seamless Transition. hydronic System Upgrade: building 141: The Current Hydronic Heating Boilers Will Be Replaced By Shell And Tube Heat Exchangers. This Upgrade Will Convert Steam Into Heating Hot Water, Preserving The Functionality Of The Existing Hydronic Hot Water Distribution System. chilled Water System Integration: utility Linkage: New Chilled Water Utilities From The Cup Will Connect To The Existing Chilled Water Systems Across The Campus. connections: The New Chilled Water Connections To Each Existing Chilled Water Distribution System Requires A Transition From The New Chilled Water Only System To The Existing Glycol-based System. backup Preservation: The Existing Chillers And Distribution Systems Will Be Kept Operational As A Backup Measure. control Systems For Chilled Water: operational Flexibility: Each Connection Point In The Chilled Water Systems Will Feature: flow Metering: To Accurately Measure Water Flow. temperature Monitoring: For Precise Control Of Cooling Capacity. motorized Valving: Enabling The Selection Between Using The Cup's Chilled Water Or Operating Individual Building Chillers, Enhancing System Flexibility And Efficiency. building 141 (existing Hydronic Plant): current Equipment: The Facility Currently Houses Two Superior Fire Tube Hot Water Boilers From 2010, Each With A Maximum Allowable Working Pressure (mawp) Of 60 Psig, Rated At 200 Boiler Horsepower (bhp) Or 6,700,000 Btu/h (mbh), And Two Patterson Kelly Hot Water Boilers From 2015, Boasting An Mawp Of 160 Psig, Rated At Approximately 60 Bhp Or 2,000,000 Btu/h (mbh). upgrade Plan: These Boilers Will Be Substituted With Shell And Tube Heat Exchangers, Supported By The New Central Utility Plant (cup). The Old Equipment Will Be Salvaged, With The Value Recaptured In The Project Cost. building 169 Extension: The Hydronic Heating Boilers And Domestic Water Heaters In Building 169 Will Also Transition To Shell And Tube Heat Exchangers, While Preserving The Existing Heating Hot Water And Domestic Hot Water Distribution Systems. building 169 (residential Rehabilitation): boiler Replacement: This Building Features Three Unitary Boilers, All Slated For Replacement By Heat Exchangers Connected To The New Cup. The Old Equipment Will Be Salvaged Off-site With Value Recaptured In The Project Cost. Service Must Be Maintained To The Existing Distribution System During The Transition, With Only Limited Disruptions During Cutover. building 171 (operational Boiler Plant): operational Continuity: Must Remain Active Until The Requirements For Commissioning And Stable Operation Of The New Cup Are Complete.. current Setup: Equipped With Three Low-pressure Superior Fire Tube Steam Boilers From 2012 (30 Psig Mawp, 8,625 Lb/hr Steam Capacity) And Two High-pressure Counterparts (150 Psig Mawp, 5,175 Lb/hr Steam Capacity). post-cup Operation: Building 171 Will Be Gutted And Maintained In An Environmentally Controlled State Following The Transition. This Equipment Is To Be Disposed Of Off-site And Salvaged With Value Recaptured In The Project Cost. The New Cup Is To Be Operational For A Full Warranty Period Prior To Decommissioning This Plant. Continuity Of Operations Is Required During The Transition To The New Cup. Provisions For Temporary Plant Operations Must Be Provided That Meet This Requirement During Transition. tank Removal: The Existing Approximately 10,000-gallon Underground Storage Tank Must Be Removed In Adherence To Montana Department Of Environmental Quality Standards, Followed By Site Restoration. service Access Road. Design And Build An Access Road Loop By Extending Devil’s Brigade Way Around The North End Of Campus To Allow For Service Access To B170 Once The Existing Devil’s Brigade Paralleling Patriot’s Way Is Closed For Construction. communications With Industry. cenwo Scheduled Teleconference For Project Information: date And Time: The Teleconference Is Scheduled For Thursday, 23 January 2025, At 1400 Cst. objective: This Session Will Provide Additional Project Details And Offer An Opportunity For Interested Parties To Ask Questions. Please Be Aware That The Information Shared During This Teleconference Is Provisional And Subject To Updates As The Project Progresses. how To Join: contact: To Obtain The Teleconference Access Information And Any Accompanying Exhibits, Please Reach Out To Adam Beaver, The Contract Specialist, Via Email At: Adam.l.beaver@usace.army.mil (mailto:adam.l.beaver@usace.army.mil). email Content: subject: Sources Sought W9128f25sm009 - Design-build Central Utility Plant (cup) At Ft. Harrison, Mt Vamc – Teleconference Info Request body: firm Details: Include Your Firm's Name And Cage (commercial And Government Entity) Code. participants: List The Names Of All Individuals From Your Firm Who Will Be Participating In The Teleconference. dial-ins: Specify The Expected Number Of Dial-ins From Your Organization. input For Acquisition Strategy: Provide Any Questions, Recommendations, Or Concerns That Could Impact The Acquisition Strategy For This Project. acquisition Input: This Is Your Opportunity To Influence The Project's Direction By Addressing Potential Issues Or Suggesting Improvements At An Early Stage. We Encourage All Interested Parties To Participate To Gain A Deeper Understanding Of The Project Scope And To Clarify Any Queries. project Labor Agreement Survey. As Part Of This Notice, Cenwo Is Also Soliciting Input From The Construction Community Regarding The Potential Application Of Project Labor Agreements (plas) For This Construction Project At The Veterans Administration Medical Center In Fort Harrison, Mt. A Pla Is Described As A Pre-hire Collective Bargaining Agreement Between A Prime Contractor And Labor Organizations, Setting Employment Terms For A Specific Construction Project Under 29 U.s.c. 158(f). A Project Labor Agreement (pla) Is A Tool That Agencies May Use To Promote Economy And Efficiency In Federal Procurement. Pursuant To Executive Order 13502, Agencies Are Encouraged To Consider Requiring The Use Of Project Labor Agreements In Connection With Large-scale Construction Projects. federal Acquisition Regulation (far 22.503) Policy: Plas Are Recognized As Tools To Promote Economy And Efficiency In Federal Procurement. Per Executive Order 13502, Agencies Are Encouraged To Consider Mandating Plas For Large-scale Construction Projects To Enhance Project Management And Outcomes. An Agency May Mandate That Contractors And Subcontractors On The Project Negotiate Or Become Party To A Pla With Labor Organizations If It Is Deemed That Such Agreements Will: advance The Federal Governments Interest In Achieving Economy And Efficiency In Federal Procurement, Producing Labor-management Stability, And Ensuring Compliance With Laws And Regulations Governing Safety And Health, Equal Employment Opportunity, Labor And Employment Standards And Other Matters; And be Consistent With Law. Reference: Far 52.222-33 Notice Of Requirement For Project Labor Agreement; Far 52.222-34 Project Labor Agreement please Provide Your Feedback On The Following: do You Have Knowledge Of Plas Being Used On Similar Local Projects? If So, Please Provide Supporting Documentation. are There Known Skilled Labor Shortages For The Crafts Required For This Project In The Area? Elaborate And Provide Documentation If Possible. are There Any Time-sensitive Constraints Or Scheduling Concerns That Could Impact The Project Timeline? Elaborate And Provide Documentation If Possible. specify Reasons How A Pla Might Advance The Federal Government's Interest In Economy And Efficiency In Procurement. specify Reasons Why You Believe A Pla Might Not Advance The Federal Government's Interest In Economy And Efficiency In Procurement. additional Information You Believe Should Be Considered On The Use Of A Pla On This Project. additional Information You Believe Should Be Considered On The Non-use Of A Pla On This Project. the Information Gathered In This Survey Should Include The Following Information On Projects Completed In The Last 2 – 5 Years: project Name And Location detailed Project Description initial Cost Estimate Vs. Actual Final Cost was The Project Completed On Time? number Of Craft Trades Present On The Project was A Pla Used? were There Any Challenges Experienced During The Project? submission Instructions. Formal Responses To This Sources Sought Notice Must Be Submitted Electronically (via Email) With: subject: “sources Sought W9128f25sm009 –design-build Central Utility Plant At The Ft. Harrison Va Contract”. please Email To Adam.l.beaver@usace.army.mil And Jeffrey.w.wyant@usacea.army.mil. Responses Must Be Received By 1400 On 13 January 2025, To Be Considered. Responses To This Sources Sought Shall Be Limited To Fifteen (15) Pages And Include The Following Information: firm's Name, Address, Point Of Contact, Phone Number, E-mail Address, Cage And Uei Number. firm's Business Category And Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture. The Categories Include Large Business (include Summary Of Small Business Participation Metrics), Small Business, Small Disadvantaged Business, 8(a) Firm, Historically Underutilized Business Zones (hubzone), Economically Disadvantaged Women-owned Small Business (edwosb), Women-owned Small Business (wosb), And Service-disabled Veteran-owned Small Business (sdvosb). provide A Maximum Of Three D-b Project Examples, Similar In Size, Scope And Complexity To The Work Described In This Notice. Provide Details Of The Project(s) Including The Scope, Contract Number If Available, The Project’s Final Price, Start And End Dates Of The Construction Work, Complexity Of The Job, And Small Business Participation, If Applicable. Additionally, Identify Whether You Were The Prime Or A Subcontractor On The Project. Finally, Please Provide Any Project References Including Owner With Phone Number And Email Address. This Ensures Clarity And Brevity In The Analysis Process. The Government May Verify Information In Cpars Or Ppirs. provide Information On Your Bonding Capability. Specifically Identify Capacity Of Performance And Payment Bonds, Both Single And Aggregate. in Addition To The Submission For The Sources Sought Above, The Responses To The Project Labor Agreement Survey Shall Be Limited To Five (5) Pages, And Include The Following Information: responses To Project Labor Agreement Survey, 2., Items1. Through 7. substantiating Project Information As Outlined In Project Labor Agreement Survey, 3., Items1. Through 7. disclaimer And Important Notes. responses Will Be Shared With Government Personnel With A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. this Notice Does Not Obligate The Government To Award A Contract. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought Or Any Follow Up Information. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization's Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or To Provide Feedback To Respondents With Respect To Any Information Submitted. all Interested Firms Must Be Registered In The System For Award Management (sam) At Https://www.sam.gov And Remain Current For The Duration Of The Source Selection Process To Be Eligible For Award Of A Government Contract. cenwo Intends To Synopsize A Requirement For Design-build Construction Services In Support Of The Cup Project At The Ft Harrison, Mt Vamc. A Fully Developed Request For Proposal Is Currently Anticipated To Be Issued During The Spring/summer Of 2025.

Details: 1. Notice: This Is Not A Solicitation But Rather A Sources Sought Synopsis To Determine Potential Sources For Information And Planning Purposes Only. 1.1 The Purpose Of This Sources Sought Is Conduct Market Research To Determine If Responsible Sources Exist, To Assist In Determining If This Effort Can Be Competitive And/or A Total Small Business Set-aside. The Proposed North American Industry Classification Systems (naics) Code Is 811210 Which Has A Corresponding Size Standard Of $34m. The Government Will Use This Information To Determine The Best Acquisition Strategy For This Procurement. The Government Is Interested In All Small Business To Include 8(a), Service-disabled Veteran-owned, Hubzone, And Women-owned Small Business Concerns. The Government Requests That Interested Parties Respond To This Notice If Applicable And Identify Your Small Business Status To The Identified Naics Code. Additionally, Please Provide Any Anticipated Teaming Arrangements, Along With A Description Of Similar Services Offered To The Government And To Commercial Customers For The Past Three Years. Any Responses Involving Teaming Agreements Should Delineate Between The Work That Will Be Accomplished By The Prime And The Work Accomplished By The Teaming Partners. 1.2 This Sources Sought Synopsis Does Not Constitute An Invitation For Bids (ifb), A Request For Quote (rfq), Or A Request For Proposal (rfp) And It Should Not Be Construed As A Commitment Of Any Kind By The Government To Issue A Formal Solicitation Or Ultimately Award A Contract. The U.s. Government Is In No Way Liable To Pay For Or Reimburse Any Companies Or Entities That Respond To This Announcement. Any Costs Incurred By Interested Companies In Response To This Announcement Will Not Be Reimbursed. 2. Program Details: the Air Force Is Issuing This Repair Sources Sought Announcement As Part Of A Market Research Survey To Determine If Additional Sources Exist That Could Become Qualified For Repair And Restoration Of The F-16 Advanced Interference Blanker Unit (aibu). The Contractor Would Be Required To Repair And Restore The Aibu To A Serviceable Condition, But Not Like New Cosmetically. Responses To This Notice Shall Consist Of An Initial White Paper (not To Exceed 3 Pages) Describing The Offeror’s Capabilities With Regard To Trouble Shooting, Testing And Repairing The F-16 Items. the Specific Parts Involved Are As Follows: fsc Niin Mmac Part # Nsn# 5895 01-347-8037 Wf 5188110-004 5895-01-347-8037 5895 01-308-0933 Wf 5188110-005 5895-01-308-0933 5895 01-357-0739 Wf 5188110-007 5895-01-357-0739 5895 01-331-0720 Wf 5188110-006, 5188110-008 5895-01-331-0720 interested Organizations Who Feel They Possess The Necessary Capabilities Should Respond By Providing The Government The Following Information: A Point Of Contact, Address, Telephone, And Fax Numbers, Email Address, Duns Number, Cage Code, And/or Tax Id Number, As Well As Size Category, (large, Small, Small Disadvantaged, Etc.), A Brief Summary Of The Companies Capabilities, Description Of Facilities, Personnel, Related Manufacturing Experience, And Existing Safety Approvals (refer To The White Paper Listed Above). provide Any Supporting Information Such As Commercial Literature, Catalogues, Manuals, Etc. If A Respondent Chooses To Utilize The Services Of Sub-tier Vendors Or Subcontractors, Those Vendors Or Subcontractors Must Meet The Criteria Specified Herein As Well. responses To This Notice Are Due On Or Before 5:00 Pm Mst January 10, 2025. All Information Marked As Proprietary Information Will Be Safeguarded To Prevent Disclosures To Nongovernment Personnel And Entities. please Send All Correspondence To The Following: Alan Gibson, Via Email At Alan.gibson@us.af.mil, Or Call At (801)775-2659 And Paige Lapoint, Via Email At Paige.lapoint@us.af.mil, Or Call At (801)586-2947.

Details: The Government Has A Requirement For Hotel Room Refrigerators (347 Each) And Combination Fridge/microwaves (13 Each) At Tyndall Afb, Fl. The Government Is Searching For Buy-american Act (baa) Compliant Appliances That Meet The Requirements Below. refrigerators: The Specifications Provided A 3.1 Mf7r Microfridge A 3.1 Cubic Ft. Refrigerator As An Example. The Government Has Been Unable To Find A Baa Compliant Refrigerator. The Construction Contractor Has Proposed The Same Make And Model As They Are Unable To Locate A Baa Compliant Model With Similar Specifications. The Microfridge Refrigerator/freezer Has These Features, 33"h X 18" W X 19"d, 1 Full-width Wire Shelf, 2 3/4" Width Door Shelves, Temperature Control, Manual Defrost, Transparent Crisper, White Interior, Environmentally Friendly, Freezer, And Ada Compliant. combination Fridge/microwaves: The Specifications Provided A 2.5mf4e-7d1 Microfridge Combination Appliance As An Example. The Government Has Been Unable To Find A Baa Compliant Appliance. The Construction Contractor Has Proposed Dimensions Approximately The Same Make And Model As They Are Unable To Locate A Baa Compliant Model With Similar Specifications. The Microfridge Combination Appliance Features, Refrigerator: 18 11/16"w X 19 11/16"d X 10 9/16"h, 1 Full-width Wire Shelf, 2 3/4" Width Door Shelves, Temperature Control, Manual Defrost, Transparent Crisper, White Interior, E-star Rated, Ada Compliant, 3.10 Cu Ft Total Capacity; Microwave: 18 2/16"w X 14 7/16"d X 10 9/16"h, Internal Smoke Sensor, Usb Charging Station W/ 4 Amps Max For The (2) Usb Ports And (1) Charging Station, Easy-grip Pull Door, Express Cook Settings, Programmed Cooking Options, Led Display And Clock, Signal Beeper W/ Adjustable Volume, Removable 10 11/16" Glass Carousel. this Request Is Not A Request To Be Placed On A Solicitation Mailing List. It Is For Information Only And Is Not A Request For Proposal (rfp) Or Announcement Of A Solicitation. The Purpose Of This Notice Is To Understand The Market For Alternative Suppliers Of The Items Described Above. This Notice Is Not A Request For Competitive Proposals; However, All Information Received By The Date Indicated In This Notice Will Be Considered By The Government. A Determination By The Government To Grant An Exception To Baa Requirements Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. The U.s. Army Corps Of Engineers, Directorate Of Contracting, Is Conducting A Market Survey To Identify Alternate Sources. Respondent Firms Shall Provide: 1. Manufacturer's Name And Unique Entity Identifier (uei) If Applicable. 2. Product Data And Written Statement Of The Ability Of Firm’s Alternative Product To Be Used In Place Of The Referenced Product Above For The Equipment Specified. 3.the Written Statement Of Compliance Shall Include Necessary Backup Design Information And Supporting Documentation. A List Of Projects In Which The Manufacturer Has Met Similar Requirements For Similar Applications Shall Be Provided. The List Shall Include The Exact Location Of Project(s) And A Point Of Contact With Phone Numbers. The Government Will Not Pay For Any Material Provided In Response To This Notice Nor Return The Data Provided. 4. Responses Should Be Sent To Eric.j.hurtado@usace.army.mil No Later Than Stated Response Time. No Other Forms Of Transmission Are Requested Or Will Be Accepted.

Details: The Department Of The Air Force, 325th Contracting Squadron (cons), Is Seeking Sources For Contemplated Eod Support Service At Tyndall Air Force Base. Please See The Attached Draft Performance Work Statement (pws). disclaimer: this Sources Sought Notice Is For Informational Purposes Only And Is Not A Request For Quotation. The Purpose Of This Notice Is To Conduct Market Research In Accordance With Federal Acquisition Regulation (far) Part 10 To Determine The Availability And Capability Of Businesses To Provide This Service At Tyndall Air Force Base, Florida. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. The Government Will Not Be Responsible For Any Costs Incurred By Interested Parties In Responding To This Notice. Any Information Submitted By Respondents Is Strictly Voluntary. Contact With Other Than 325 Cons Government Personnel By Potential Offerors Or Their Employees Regarding This Project Is Prohibited. the Tentative Solicitation Issue Date Is To Be Determined. Any Future Solicitation Will Be Made Available Only On Sam.gov. Interested Parties Are Solely Responsible For Monitoring The Aforementioned Website For The Release Of A Solicitation Package And/or Any Updates And/or Amendments. north American Industry Classification System (naics) Code: the Anticipated North American Industry Classification System Code (naics) For This Requirement Is 541690 – Other Scientific And Technical Consulting Services. vendor Response/required Capabilities: it Is Requested That Vendors Respond To This Sources Sought Notice With Information In Sufficient Detail Regarding Their Capabilities And Capacity To Satisfy The Requirement. The Government Is Contemplating A Firm-fixed-price Contract (ffp) As The Appropriate Contract Type Applicable To The Requirement. see The Attached Draft Performance Work Statement (pws). A Final Pws Will Be Issued At The Time Of Solicitation (date: Tbd). Potential Offerors Are Encouraged To Provide Feedback On The Draft Pws Content. The Government May Not Respond To Or Publish Comments, Resulting Actions, Changes, Etc; However, The Draft Pws May Or May Not Be Revised Based On Feedback Provided. Potential Offerors Are Cautioned That Proposals Must Be Based On The Actual Rfp, Once Posted, And Not Posted Draft Documents. submission Details/information Sought By The Government: 1. Your General Company Information To Include: Company Names, Address, Point Of Contact, Phone Number, E-mail Address, Commercial And Government Entity (cage) Code, Unique Entity Id, Business Size (i.e., Small Business, Other Than Small), And Naics Code(s) The Company Usually Performs Under. 2. Capabilities Statement Providing Sufficient Information Describing Ability To Perform Eod Support Services On Tyndall Afb. 3. Interested Parties Are Encouraged To Provide Feedback In The Attached Comment Spreadsheet In Regard To The (draft) Performance Work Statement. note: Any Prospective Contractor Must Be Registered In The System For Award Management (sam) In Order To Be Eligible For Award. The Website Is Https://www.sam.gov. Registration Requires Applicants To Have A Unique Entity Id. Registration May Take Up To Three Weeks To Process. all Submissions Must Be Received No Later Than 1:00 Pm Central Time On Friday, 03 Jan, 2025. Packages Can Be Sent Electronically To Ssgt Rebecca Cudjoe At Rebecca.cudjoe@us.af.mil And Mr. David Hackney At David.hackney.1@us.af.mil. Oral And Mailed Communications Are Not Acceptable In Response To This Notice. the Government Will Not Provide A Debriefing On The Results Of The Survey. All Information Submitted Will Be Held In A Confidential Manner And Will Only Be Used For The Purpose Intended.

Details: A Sources Sought Is A Market Research Tool Being Used To Determine Availability And Adequacy Of Potential Business Sources Prior To Determining The Method Of Acquisition. The Intent Of This Sources Sought Synopsis Is To Identify Businesses For A Firm-fixed Price, Indefinite Delivery Indefinite Quantity (idiq) Contract. This Contract Is Referred To As The Italy Hazardous Waste Disposal Contract. Contractor Work Under This Contract Will Consist Primarily Of The Removal, Transportation, Treatment, Recycling, And Disposal Of Hazardous And Non-hazardous Wastes. Hazardous Waste (hw) Is Generated At United States (u.s.) Department Of Defense (dod) Installations Located In Aviano, Livorno, Vicenza, Naples, Gaeta, Sigonella, And Augusta Bay In The Host Nation (hn) Of Italy. The U.s. Government (usg) May Order Various Additional Services In Accordance With (iaw) This Contract Including But Not Limited To The Provision Of Supplies, Sampling And Analytical Services, Equipment Rental Services, Overpacking/loose-packing Services, Lab Packing Services, Industrial Cleaning Services, Removal Of Appliances Containing Ozone Depleting Substances (ods), And Other Services Supporting Environmental And Waste Management Programs And Activities. Infectious Or Biohazardous Medical Wastes, Controlled Pharmaceutical Wastes, Radioactive Wastes, And Materials Potentially Presenting An Explosive Hazard (mppeh) Will Not Be Turned In For Removal Under This Contract. pickup Point Locations For Waste Removals And Other Required Services Are Identified In (attachment 3) Of The Contract. upon Review Of Industry Response To This Sources Sought Synopsis, The Government Will Determine Whether A Set-aside Acquisition Is In The Government's Best Interest. The Government Intends To Solicit And Award A Firm-fixed Priced Idiq Services Contract. the North American Industry Classification Standard (naics) Code Is 562211 (hazardous Waste Treatment And Disposal). The Size Standard Of This Naics Code Is $41.5m. Naics Code Compliance Verification Will Occur If/when Proposals Are Submitted. proposals Are Not Being Submitted At This Time. The Duration Of The Contract Is Anticipated To Be For One (1) Thirty (30) Month Base Period From The Date Of An Initial Contract Award And Will Include One (1) Thirty (30) Month Option Period. A Response To This Sources Sought Notice Will Not Be Considered An Adequate Response To Any Forthcoming Solicitation Announcement, Nor Will It Result In Your Firm's Name Being Added To A Plan Holder's List To Receive A Copy Of A Solicitation. Contractors Are Reminded That This Is A Sources Sought Notice, Not A Solicitation For Work, Nor Is It A Request For Proposals. There Is No Solicitation Available At This Time. submission Requirements: Interested Firms Must Submit A Brief Capabilities Statement Package (no More Than 3 Pages In Length, Single-spaced, 12-point Font Minimum) Demonstrating Ability To Perform The Requested Services. this Documentation Shall Address, As A Minimum, The Following: (1) Company Profile To Include Number Of Employees, Office Location(s), Duns Number And Or Cage Code And Statement Identifying Small Business Category And Current Status Of The Small Business Classification. (2) Relevant Experience Within The Last Five Years, Including Any Contract Number, And government/agency Or Firm Point Of Contact (poc) And Current Telephone Number For The Poc. also, Identify If You Were A Subcontractor And The Work You Actually Performed As The Sub-contractor. Company Sales Brochures Or Marketing Packages Will Not Be Considered. the Submittal Package Must Be Received At The Office No Later Than 5:00 P.m. Est On 27 Janurary 2025. electronic Submissions Of The Statement Of Capabilities Packages Can Be Sent Electronically To melissa.herrick@dla.mil, Contracting Officer. the Government Will Not Provide A Debriefing On The Results Of The Survey. All Information Submitted Will Be Held In A Confidential Manner And Will Only Be Used For The Purpose Intended.

Details: The Defense Logistics Agency (dla) - Richmond Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For An Fairing, Fuel Tank. The Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336413. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. if Your Organization Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, Emails Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. [note: In Accordance With Far 10.001(b), Agencies Should Not Request Potential Sources To Submit More Than The Minimum Information Necessary.] the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To 1) Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated; 2) Secure And Apply The Full Range Of Corporate Financial, Human Capital, And Technical Resources Required To Successfully Perform Similar Requirements; 3) Implement A Successful Project Management Plan That Includes: Compliance With Tight Program Schedules; Cost Containment; Meeting And Tracking Performance; Hiring And Retention Of Key Personnel And Risk Mitigation; And 4) Provide Services Under A Performance Based Service Acquisition Contract. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition, And Multiple Awards May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By 3:00 Pm, Est., January 6, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Melinda.johnson@dla.mil. if You Have Any Questions Concerning This Opportunity, Please Contact: Melinda Johnson At Melinda.johnson@dla.mil. this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. purpose And Objectives potential Sources Shall Be Capable Of Furnishing All Labor, Materials, Facilities And Equipment Required To Accomplish The New Manufacture Of The Item(s). Generally, This Entails The Procurement/manufacture Of Component Parts, Inspection, Testing, Preservation/packaging, And Shipping. Additionally, Potential Sources May Be Responsible For Supply Chain Management, Logistics Planning, Forecasting Production Requirements, Long-lead Time Parts Procurement, Diminishing Manufacturing Sources And Material Shortage Issues, And Shipping Serviceable Assets. The Unit Prices Will Be Established At The Time Of A Contract Award. the Specific Requirement For This Effort Is Below: part Number: 65205-08025-041 nomenclature: Fairing, Fuel Tank nsn: 1560-008904160 estimated Requirement: 190 Each