Solar Tenders

Details: Temple University Temple Is Se ... Temple University Temple Is Seeking Qualified Contractors To Bid On Work For The General Construction Package For Temple S Combined Heat And Power Plant Project The Project Located At 1800 N 10th Street Philadelphia Pa 19122 The Proposed Renovations Will Be In The Central Steam Plant Located On Temple S Main Campus The Project Involves The Removal Of The Four Existing Water Tube Boilers And Their Replacement With A Solar Turbines Taurus 60 Combustion Turbine Generator Coupled To A Rentech Heat Recovery Steam Generator With The Related Mechanical Electrical Plumbing And Fire Protection And Structural Infrastructure To Support The New Equipment This Project Is Subject To A Delegation Agreement Between Temple The Pennsylvania Department Of General Services And The Governor S Office Of The Budget This Project Will Be A Multi Prime Project Delivered Pursuant To A Multi Prime Contract Delivery Structure The Prime Contractors Will Include General Construction Mechanical Electrical And Plumbing And Fire Protection And Each Other Contractor Identified By Temple As Being A Prime Contractor For The Project And Which Has Been Engaged Directly By Temple To Perform Construction Or Supply Machinery Materials Equipment Or Labor For Construction Of The Project General Construction The Scope Of Work For The General Construction Package Shall Include All Necessary Services Work Labor Materials Supervision Tools Supplies Equipment Insurance And Applicable Taxes Necessary To Complete General Construction Package As Shown In The Contract Documents For The Project The Scope Of Work For The General Construction Package Is Further Specified In The Agreement The Scope Of Work The Plans And Specifications And Other Documents That Will Be Uploaded To Tuebid As Part Of The Solicitation Inflation Reduction Act Income Tax Credits Prevailing Wage And Domestic Content Requirements Temple Is Seeking Certain Inflation Reduct...

Details: Temple University Temple Is Se ... Temple University Temple Is Seeking Qualified Contractors To Bid On Work For The Plumbing And Fire Protection Package For Temple S Combined Heat And Power Plant Project The Project Located At 1800 N 10th Street Philadelphia Pa 19122 The Proposed Renovations Will Be In The Central Steam Plant Located On Temple S Main Campus The Project Involves The Removal Of The Four Existing Water Tube Boilers And Their Replacement With A Solar Turbines Taurus 60 Combustion Turbine Generator Coupled To A Rentech Heat Recovery Steam Generator With The Related Mechanical Electrical Plumbing And Fire Protection And Structural Infrastructure To Support The New Equipment This Project Is Subject To A Delegation Agreement Between Temple The Pennsylvania Department Of General Services And The Governor S Office Of The Budget This Project Will Be A Multi Prime Project Delivered Pursuant To A Multi Prime Contract Delivery Structure The Prime Contractors Will Include General Construction Mechanical Electrical And Plumbing And Fire Protection And Each Other Contractor Identified By Temple As Being A Prime Contractor For The Project And Which Has Been Engaged Directly By Temple To Perform Construction Or Supply Machinery Materials Equipment Or Labor For Construction Of The Project Plumbing And Fire Protection The Scope Of Work For The Plumbing And Fire Protection Package Shall Include All Necessary Services Work Labor Materials Supervision Tools Supplies Equipment Insurance And Applicable Taxes Necessary To Complete Plumbing And Fire Protection Package As Shown In The Contract Documents For The Project The Scope Of Work For The Plumbing And Fire Protection Package Is Further Specified In The Agreement The Scope Of Work The Plans And Specifications And Other Documents That Will Be Uploaded To Tuebid As Part Of The Solicitation Inflation Reduction Act Income Tax Credits Prevailing Wage And Domestic Content Req...

Details: Temple University Temple Is Se ... Temple University Temple Is Seeking Qualified Contractors To Bid On Work For The Electrical Package For Temple S Combined Heat And Power Plant Project The Project Located At 1800 N 10th Street Philadelphia Pa 19122 The Proposed Renovations Will Be In The Central Steam Plant Located On Temple S Main Campus The Project Involves The Removal Of The Four Existing Water Tube Boilers And Their Replacement With A Solar Turbines Taurus 60 Combustion Turbine Generator Coupled To A Rentech Heat Recovery Steam Generator With The Related Mechanical Electrical Plumbing And Fire Protection And Structural Infrastructure To Support The New Equipment This Project Is Subject To A Delegation Agreement Between Temple The Pennsylvania Department Of General Services And The Governor S Office Of The Budget This Project Will Be A Multi Prime Project Delivered Pursuant To A Multi Prime Contract Delivery Structure The Prime Contractors Will Include General Construction Mechanical Electrical And Plumbing And Fire Protection And Each Other Contractor Identified By Temple As Being A Prime Contractor For The Project And Which Has Been Engaged Directly By Temple To Perform Construction Or Supply Machinery Materials Equipment Or Labor For Construction Of The Project Electrical The Scope Of Work For The Electrical Package Shall Include All Necessary Services Work Labor Materials Supervision Tools Supplies Equipment Insurance And Applicable Taxes Necessary To Complete Electrical Package As Shown In The Contract Documents For The Project The Scope Of Work For The Electrical Package Is Further Specified In The Agreement The Scope Of Work The Plans And Specifications And Other Documents That Will Be Uploaded To Tuebid As Part Of The Solicitation Inflation Reduction Act Income Tax Credits Prevailing Wage And Domestic Content Requirements Temple Is Seeking Certain Inflation Reduction Act Ira Income Tax Credits ...

Details: Description Republic Of The Philippines Province Of Leyte Municipality Of Matalom Barangay Tigbao _________________________ Date Request For Price Quotation No. _____________ Gentlemen: You Are Cordially Invited To Submit And Quote Your Lowest Price On The Following Supplies, Materials And/or Equipment Listed Hereunder. Please Be Informed That This Procuring Entity Shall Only Consider Price Quotation Within Approved Budget Cost (abc). Your Price Quotation Shall Include The Following Documents And Submitted In A Sealed Envelope, Indicating The Solicitation No./reference No.: 1. Tax Clearance Or Any Proof Of Tax Payment For The Preceding Taxable Year. 2. Mayor’s Business Permit 3. Dti Registration 4. Philgeps Registration (for Svp Procurement Only) Furthermore, The Period Of Delivery Must Be Within 120 Working Days From Your Receipt Of The Procuring Entity’s Contract Agreement And Notice To Proceed. Submission Of Quotations Must Be Made At This Office On Or Before The Opening Of Quotations Scheduled On November 28, 2024 At 10:00 A.m At Barangay Session Hall, Brgy Tigbao Matalom, Leyte. Please Be Guided Accordingly. Very Truly Yours, Hon. Francisco P. Tam-is Brgy Bac Chairman Qty Unit Complete Description Of Article Unit Price Amount 6 Units Flood Lights 200 Watts 5 Units Solar Lights 200 Watts 80 Mtrs. Service Drop Wire Total >>> The Bac Chairman, Bids And Award Committee Brgy. Tigbao, Matalom, Leyte Sir: Incompliance With Your Request For Price Quotation And In Behalf Of __________________________, We Hereby Commit To Faithfully Comply With All The Requirements Relative To This Request, It Is Fully Understood That Our Failure To Furnish And Deliver The Items As Herein Quoted Will Disqualify Our Firm To Participate In Future Biddings Conducted By The Authority. _______________________________ (sign Over Printed Name) ______________________________ (position)

Details: Description Pc Original Rechargeable Battery Battery Size: Aa Battery Capacity (mah): 2550mah Battery Chemistry: Ni-mh Battery Voltage: 1.2 Battery Terminal Type: Button Top Battery Shelf Life: 4-6 Years Packaging: Retail Packaging Product Weight: 0.95oz Product Dimensions: 1.98" (l) X 0.56" (diameter) Upc: 73096902091 Mpn: Bk-3mcca12ba Country Of Origin: Jp Associated Battery Sizes: 1.2h2, 1.2k2, 10320, Aa, Bk-3hcce, Bk-3mcce, Dc1500, Dx1500, Hr-3utgb, Hr-3uwxb, Hr6, Kr6, Ld715, Nh15, Nm715, Pl715 80 Pc Original Rechargeable Battery Battery Size: Aaa Battery Capacity (mah): 950 Battery Chemistry: Ni-mh Battery Voltage: 1.2 Battery Terminal Type: Button Top Battery Shelf Life: 4-6 Years Packaging: Retail Packaging Product Weight: 0.46oz Product Dimensions: 1.752" (l) X 0.413" (diameter) Upc: 073096902077 Mpn: Bk-4hcca4ba Country Of Origin: Jp Associated Battery Sizes: 1.2h1, 10405, Aaa, Bk-4hcce, Bk-4mcce, Dc2400, Dx2400, Hr-4utgb, Hr-4uwxb, Hr03, Kr03, Ld724, Nh12, Nm724, Pl724 40 Pc Ups Battery 12v 45w 7.5ah Npw45-12 12 Volts 45 Watts 7.5 Ampere Rechargeable Valve Regulated Lead Acid (vrla) Battery For Ups, Solar, Toy Cars, E-bike, Emergency Light, Inverter Replaces 12v 7.2ah 12 Volts 7.2 Ampere 8ah 7.5 Ah 7ah 8.5ah Connector 6.35 Mm Blade Terminal Sealed Lead-acid Battery Excellent Cycling Capability Very High Energy Density High Rate Discharge Capability Lowest Self Discharge Rate Approved For Shipping As Non-hazardous, Non-spillable Operates In Any Position Low Internal Resistance Lwh – 151 X 64.5 X 94 Mm Lwh – 5.94 X 2.56 X 3.74 Inches 20 Pc Ups Battery 12v 9ahnpa9-1212 Volts S 9 Ampererechargeablevalve Regulated Lead Acid (vrla)battery For Ups, Solar, Toy Cars, E-bike, Emergency Light, Inverterreplaces 12v 9ah 12 Volts 7.2 Ampere 8ah 7.5 Ah 7ah 8.5ahconnector 6.35 Mm Blade Terminalsealed Lead-acid Batteryexcellent Cycling Capabilityvery High Energy Densityhigh Rate Discharge Capabilitylowest Self Discharge Rateapproved For Shipping As Non-hazardous, Non-spillableoperates In Any Positionlow Internal Resistancelwh – 151 X 64.5 X 94 Mmlwh – 5.94 X 2.56 X 3.74 Inches 20 Pack Battery - Aaa Size Aaa Alkaline Battery 2-piece Pack 10x Longer Lasting Trusted & Reliable Alkaline Battery Locks In Power For 10 Years 30 Pack Battery - Aa Size Aa Alkaline Battery 2-piece Pack 10x Longer Lasting Trusted & Reliable Alkaline Battery Locks In Power For 10 Years 30 Xxxxxxxxxxxxxxxxxxxxx Note: Supplier Must Be Within Koronadal City Only

Details: Title: Lieferung Von Datensammler Und Kommunikationsgateway Im Rahmen Der Eed (eu-energieeffizienzrichtlinie) description: Lieferung Von Datensammler Inklusive Kommunikationsgateways Zur Realisierung Der Fernauslesung Von Fernwärme- Und Fernkältezähler. Für Die Unterschiedlichen Einsatzumgebungen Werden Folgende Lose Und Mengen Ausgeschrieben: - Los 1: Wireless M-bus-gateway 230 V (kundenanlage) Mindestabnahmemenge: 100 Schätzabnahmemenge: 200 Höchstabnahmemenge: 1.000 Beschreibung: Das Wireless M-bus Gateway Wird In Fernwärmeanlagen Direkt Im Kundenkeller Mit Hoher Anschlussleistung Eingebaut. Der Netzanschluss Erfolgt Über Einen 230 V Anschluss. Die Erfassung Und Versand Der Status- Und Telemetriedaten Muss Mindestens Im 5-minuten-intervall Möglich Sein. - Los 2: Wireless M-bus-gateway 230 V (swm-infrastruktur) Mindestabnahmemenge: 50 Schätzabnahmemenge: 100 Höchstabnahmemenge: 1.000 Beschreibung: Das Wireless M-bus Gateway Wird In Anlagen Der Swm-infrastruktur (netztrafostationen, Ortsverteiler-kästen) Eingebaut. Hierfür Wird Ein Flaches Gehäuse Aufgrund Des Geringen Platzangebotes Benötigt. Der Netzanschluss Erfolgt Direkt Über Einen 230 V Anschluss. Die Erfassung Und Versand Der Status- Und Telemetriedaten Im 15-minuten-intervall Muss Möglich Sein. - Los 3: Wireless M-bus Gateway 230 V (din-rail) Mindestabnahmemenge: 25 Schätzabnahmemenge: 50 Höchstabnahmemenge: 500 Beschreibung: Das Wireless M-bus Gateway Wird Direkt In Schaltschränken Bzw. Fernwärmeanlagen Eingebaut, In Denen Die Möglichkeit Zur Hutschienenbefestigung Besteht. Der Netzanschluss Erfolgt Direkt Über Einen 230 V Anschluss. Die Erfassung Und Versand Der Status- Und Telemetriedaten Im 15-minuten-intervall Muss Möglich Sein. - Los 4: Wireless M-bus Gateway Batterie/solar Mindestabnahmemenge: 1.000 Schätzabnahmemenge: 3.300 Höchstabnahmemenge: 6.000 Beschreibung: Die Wireless M-bus Gateways Müssen In Einem Wetterfesten Gehäuse Eingebaut Sein, Da Die Geräte Ausschließlich Im Freien - An Nicht Wettergeschützten Standorten, Z. B. Straßenlaternen, Sonstigen Mastformen – Montiert Werden. Es Besteht Hier Keine Möglichkeit Über Eine 230 V Spannungsversorgung, Deshalb Muss Die Versorgung Über Eine Alternative (solar, Batterie) Erfolgen. Die Erfassung Und Versand Der Status- Und Telemetriedaten Einmal Am Tag Muss Möglich Sein. - Los 5: Wireless M-bus Gateway Batterie Mindestabnahmemenge: 300 Schätzabnahmemenge: 1.100 Höchstabnahmemenge: 5.500 Beschreibung: Das Wireless M-bus Gateway Wird In Fernwärmeanlagen In Kundenanlagen Eingebaut. In Der Einbaustätte Existiert Kein 230 V Netzanschluss, Deshalb Muss Die Versorgung Über Eine Leistungsfähige Batterie Erfolgen. Die Erfassung Und Versand Der Status- Und Telemetriedaten Einmal Am Tag Muss Möglich Sein. Jedes Los Wird Jeweils Nur An Einen Bieter Zu Vollem Umfang Vergeben. Der Auftraggeber Schreibt Jeweils Los Spezifisch Mindest-, Schätz- Und Höchstmengen Aus. Hierbei Besteht Für Den Auftraggeber Lediglich Die Verpflichtung Zur Abnahme Der Mindestmengen. Bei Auftragserteilung Erfolgen Jeweils Einzelne Abrufbestellungen Über Die Tatsächlich Zu Liefernden Mengen. Abschluss Eines Rahmenvertrages Mit Einer Voraussichtlichen Laufzeit Von 01.03.2025 - 28.02.2027 Mit Der Option Zur Verlängerung Um Ein Weiteres Jahr (28.02.2028). Das Device Management, Sowie Die Übertragung Der Bewegungsdaten (telemeterie- Und Abrechnungsdaten) Erfolgt Ausschließlich Über Die Iot-plattform "niotix" Vom Softwareanbieter Digimondo.

Details: Description Supply And Delivery Of Mechanical, Electrical And Construction Equipment & Supplies And Tools For The Use Of The Provincial Engineering Office 1 1 Unit Injector Tester For Manual (pump W/o Fittings) Specifications: Material: Aluminum Alloy Gauge: 3.5 Inches Dial Guage Test Pressure Range: 0 To 600 Bar Or 0 To 8,700 Pounds Per Square Inch (p.s.i.) 2 1 Set Drill Bit For Metal(1/16 To 1/2, 29 Pcs) 3 1 Unit Engine Cleaner Gun ( For Compressed Air W/ Reservoir) 4 1 Pc Soldering Iron 100w Heavy Duty 5 1 Roll Soldering Led 6 1 Set Tie Rod End Remover And Lifter 7 4 Pcs Jack Stand 3t 8 1 Unit Cordless Impact Drill W/ Battery And Charger Specifications: Voltage: 20v (battery) No Load Speed 0-350 Rpm (lo Speed Setting) / 0-1400 Rpm (hi Speed Setting) Chuck Capacity: 13mm Diameter Battery: 2000 Mah 9 2 Units Cordless Impact Wrench 20v W/ Battery And Charger Specifications: Operating Voltage: 20 Volts Motor Type: Brushless Drive: Square 1/2 Inch No Load Speed Max: 2,100 Rpm Max Impact Rate: 1,500 Bpm Max Fastening Torque: 850 N-m 10 1 Unit Electric Cutoff Machine Specifications: Blade Diameter: 14 Inches 220v, 60hz, Single Phase. 1800 Watts 11 1 Pc Flat File 6" 12 1 Pc Flat File 8" 13 1 Pc Round File 5/32" 14 1 Pc Round File 3/16" 15 1 Pc Round File 7/32" 16 4 Pcs Air Hose(hd) 8mm(10m) With Quick Release Coupling 17 1 Roll Extension Wire Set 50m ( Up To 1500w Max. ) 18 2 Rolls Dry Net 8' X 30m (dump Truck Cover) 19 1 Unit Demolition Hammer W/ Chisel 6500dh Specifications: Power Input: 1,240w Full Load Impact Rate: 1,400rpm Weight: 15kg Voltage: 220v Cable Length: 3m Working Chisel Length: 65mm Casing: Steel Case Accessories: Wrench, Allen Screw, Oil Feeder Chisel Length: 295mm Chisel Diameter: 22mm Chisel Type: Hexagonal Overall Chisel Length: 410mm 20 16 Pcs Canvass For Tent 4m X 6m "white" 21 4 Rolls Rope Light Flat 50m 22 10 Pcs Solar Ceiling Lights 300w W/ Separate Panel 23 12 Pcs Solar Traffic/warning Lights 24 1 Set 1-single Port Fast Charger, 2 Pcs. 6.0ah Battery 25 10 Pcs Cutting Chain For Stihl Ht 75 26 10 Pcs Cutting Chain For Ms 381 20 27 10 Pcs Cutting Chain For Ms 070/ms 720 36-ripping Or Cutting 28 1 Box Chain Saw File ( 4mm For Sthil 75 (6 Pcs/box) 29 1 Box Chainsaw File (3/16 Sthil For Ms 381 20" (6pcs/box) 30 1 Box Chainsaw File ( 7/32" Sthil For 36"(6 Pcs/box) 31 10 Pcs Triangular Saw File 32 5 Pcs Saw Set Plier X-x-x-x-x

Description: CATEGORY: ADJUSTABLE MICRO PIPETTE 10 to 100 MICRO LITRE with 2 box of 100 tips each , ADJUSTABLE MICRO PIPETTE 100 to 1000 MICRO LITRE with 100 tips , VARIABLE VOLUME AUTO PIPETTE CAP 10 ML with 15 tips , Aluminium Foil , Aluminium sampling Bottle 2 litre capacity with handle and inner and outer cap , BEAKERS PLASTIC 1000 ML CAPACITY , BEAKERS PLASTIC 2000 ML CAPACITY , BEAKERS PLASTIC 5000 ML CAPACITY , BOTTLE BRUSH Nylon , Bottle top Dispenser 2.5 to 30 ML , Bottle top Dispenser 1.0 to 10 ML , Bottle top Dispenser 0.5 to 5 ML , BUBBLER SILICON TYPE SMALL , BUBBLER SILICON TYPE BIG , Calculator 12 digit solar battery , Cotton gloves , Digital stop watch , Filter paper mixed cellulose ester membrane , Forceps SS , Forceps straight Plain , DUSTER Cotton Lint free , FILTER PAPER Glass Micro fibre , Filter paper Gd 41 , Filter paper Gd 42 , Filter paper 0.45 micron , FLASK BRUSH Nylon , Glass Syringe with needle 1 ml , Glass Syringe with needle 5 ml , Hand gloves Acid Proof , Density Hydrometer Least count 0.0005 with NABL certificate range 0.6500 to 0.7000 , Density Hydrometer Least count 0.0005 with NABL certificate range 0.7000 to 0.7500 , Density Hydrometer Least count 0.0005 with NABL certificate range 0.7500 to 0.8000 , Density Hydrometer Least count 0.0005 with NABL certificate range 0.8000 to 0.8500 , Density Hydrometer Least count 0.0005 with NABL certificate range 0.8500 to 0.9000 , Jerricane Plastic 10 Liter , Jerricane Plastic 5 Liter , Magnet for magnetic stirrer , PLASTIC BOTTLE with cap 125 ML , PLASTIC BOTTLE with cap 250 ML , PLASTIC BOTTLE with cap 500 ML , PLASTIC BOTTLE with cap 1000 ML , Plastic measuring cylinder , Plastic Tray 32 cm width and 45 cm length , Plastic Tray 30 cm width and 30 cm length , SYRINGE Plastic with needle 5 ML , SYRINGE Plastic 10 ML , SCISSORS STRAIGHT SS TAILOR TYPE , SPATULA ONE END SPOON AND ONE END FLAT , Sterilized cotton roll 1 Kg , Silicon Rubber Tube OD 8.5 mm ID 4 mm , Silicon Rubber Tube ID 6 mm , Silicon Rubber Tube ID 8 mm , Thermometer IP 39C Least count 0.1 degree Celsius , Thermometer ASTM 127C or IP 99C Least count 0.05 degree celsius , Thermometer IP 64C or ASTM 12C Least count 0.2 degree celsius , Thermometer ASTM 3C Least count 1 degree celsius , Thermometer IP 6C or ASTM 8C Least count 1 degree celsius , Thermometer IP 92C or ASTM 120C Least count 0.05 degree celsius , Tissue Roll , Wash Bottlle Plastic , Tong SS for crucible , Teflon tape roll

Description: CATEGORY: Arduino UNO R3 , Arsuino Nano , Resberry Pi 3 , Aurdino Mega , Breadboards 800points , Breadboards 400points , Berg Strip F,M , Zero PCB , 16x2 LDC Display with I2C module , USB Cables , 9V Battery , Resistors Kit , Capacitors Kit , Linear Voltage Reguiulator set , Water Pump Module , Piezoelectic Plate , 8by8 LED Matrix Module , Bluetooth Module , 7 Segment LED Display , GSM Module , GPS Module , Laser Diode Emitter , LDR Module , Keypad , Joy Stick , Active Buzzer , Motor Driver L298P , Sound Playback Module , ESP 32 , Vibrating Motor , Alligator Coonector , DC Jack Male and Female , RGB LEDs , LEDs red , LEDs green , LEDs blue , LEDs yellow , LEDs white , IC LM555 , Diod and Transistor Kit , Button Switch Set , Touch Module , Battery Clip , IR Sensors , Triple Axis Magnetometer , MQ4 Sensor , MQ5 Sensor , MQ6 Sensor , MQ7 Sensor , MQ8 Sensor , MQ135 Sensor , IR Transmiter and Receiver , Ultrasonic Sensor Module , Triple Axis Accelerometer , Pulse Rate Heart Sensor , Relay 1 Channel module , Relay 2 Channel Module , Sound Module , Soil Moisture Sensor Module , Rain Drop Sensor , Flex Sensor , Temperature and Humidity Sensor Module , Force Pressure Sensor , Colour Recognisation Sensor , Water Flow Sensor , Power Bank Module , PIR Motion Sensor Module , RFID Reader , RF Module , Stepper Motor , DC Motor , Servo Motor Metal Gear 180 , Servo Motor Metal Gear 360 , Small Servo Metal Gear , 4 Wheel Robot Car Chassis Kit , Drone Kit , Bio-Medical Kit , 3D printer , 3D filament 1000gm , Cardboard , Foam Core Boards , Rubberband , Popsicle Stick , Wood Glue 500ml , Hacksaw Frame , Hacksaw Blades , Mini Hacksaw Frame , Mini Hacksaw Blades , Pliers set , Twizer Set , Ball Peen Hammer , Steel Shaft Claw Hammer , C-Clamp , Allen key Set , Drill Machine Set , Workstation For Drilling , Spanner Set , Vice Normal , Precision Screw Driver , Wrench , Wire Stripper , Screwdriver , Cordless Rotary Multitool Set , Air Blower , Drill Bit Set , File Set , Mini File Set , Flexiable Cutting Mat , Plastic Storage Drawer , Pegboard , Hot Glue Gun , Digital Oscilloscope , Soldering Kit , Adapter 5v , Adapter 12v , Electric Screw Driver , Dual Temperature Heat Gun , Soldering helping Hand , Return Measuring tape , Stainless Steel Rule , Digital Vernier Calliper , Spirit Level , Digital Multimeter , Diy Paper Microscope , Telescope , Sewing Kit , Glue Stick , Cable Tie , Power Strip Adapters , Buld Holder , Electric wires 20M , First Aid Kit , Fire Extinguisher , Saftey goggles , Safety Gloves , Safety Mask , Furniture , Chairs , LEH Solar Training Kit , LEH Green House Kit

Details: Description Supply Of Labor And Materials For The Establishment Of Portable Warehouse In Multi-species Marine Legislated Hatchery In Bagac, Bataan: I. Site Works Mobilization/de-mobilization 1 Lot Ii. Steel Works/perimeter Wall Black Iron Tubular 100mm X 50mm X 1.5mm Thick @6m 27 Pcs Black Iron Tubular 32mm X 32mm X 1.5mm Thick @6m 10 Pcs Pre-painted Rib Type Roofing 0.5mm Thickness @10ft 22 Pcs Sub-total Material Cost: Sub-total Labor Cost: Iii. Roofing Works Black Iron Tubular 100mm X 50mm X 1.5mm Thick @6m 6 Pcs C-purlings 50mmx75mmx1.2mm Thick 14 Pcs Pre-painted Rib Type Roofing 0.5mm Thickness 20ft 8 Pcs Welding Rod 2.5mm 2 Box Rivets 2 Box Sub-total Material Cost: Sub-total Labor Cost: Iv. Electrical Works Heavy Duty Solar Ligths (30 Watts) 4 Pcs Sub-total Material Cost: Sub-total Labor Cost: V. Paint Works Epoxy Primer 2 Gal Paint Accessories 1 Lot Sub-total Material Cost: Sub-total Labor Cost: Vi. Door Wooden Panel Door With Door Jamb (900mmx2100mm) 1 Set Sub-total Material Cost: Sub-total Labor Cost: Total Direct Cost: Contractor's Profit (10% Of Tdc): Overhead, Contingencies, And Miscellaneous (12%): Sub-total Cost (tdc + Ocm + Cp) Tax And Vat (5% Of Stc) Please See Attached Design/layout