Software Tenders

Details: 1. Notice Type: request For Information (rfi) On Launched Effects (le) Capabilities That Will Potentially Be Integrated On Medium/high Altitude Aerial Platforms That Function As Aerial Intelligence, Surveillance, And Reconnaissance (a-isr) Aircraft (ac). 2. Synopsis: A. Introduction this Rfi Is For Informational And Planning Purposes Only. This Rfi Does Not Commit The Government To Contract For Any Supply Or Service In Any Respect. All Firms Responding To This Rfi Are Advised That Their Responses To This Notice Are Not A Request That Will Be Considered For Contract Award. Furthermore, The Army Is Not Seeking Proposals And Will Not Accept Unsolicited Proposals At This Time. Respondents Are Advised That The U.s. Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi; All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party’s Expense. This Is Strictly Market Research In Accordance With Federal Acquisition Regulation (far) Part 10. B. Objective (1) The United States Army Contracting Command Redstone Arsenal, Alabama Is Seeking Information On Current Technology Products Applicable To: (a) The Special Electronic Mission Ac Product Directorate Of The Fixed Wing Project Office (fwpo) Has An Emerging Requirement For A Le Capability To Be Integrated Onboard A Medium/high Altitude, Higher Airspeed (increased Range/ Operational Area) A-isr Day/night, Ac. (b) The A-isr Le Operational Capability Will Be Demonstrated In The ~ Fiscal Year 26 Timeframe. (c) The Le Systems Would Be Integrated Onto The Hardpoints Of An All-weather, Pressurized, Large-sized-cabin Federal Aviation Administration Far Part 25 Certified Executive Jet-category Ac (bombardier G6500 Ac). (2) The Le System Should Be Compatible With The Host Ac Flight And Carriage Envelope: (a) The Host Ac Will Operate Above 41,000 Feet Mean Sea Level And Above 400 Knots True Airspeed For Greater Than Seven Hours.the Standard Atmosphere Air Temperature Is Less Than -65°fahrenheit At These Altitudes. (b) The Le Systems Will Be Carried And Deployed From Pylons At The Inboard Or Outboard Wing Hardpoint Stations Of The Host Ac In A Non-pressurized Environment At The Host Ac Operating Conditions. (c) Inboard Hardpoint Stations: The Le System, Launcher, And Pylon Should Weigh Less Than 1800 Pounds. (d) Outboard Hardpoint Stations: The Le System, Launcher, And Pylon Should Weigh Less Than 600 Pounds. (e) The Host Ac Will Not Conduct Launch Specific Maneuvers For The Le System. The System Should Deploy From The Host Ac Cruise Configuration. (f) The Host Ac Will Provide No More Than 10kva Power (configurable Ac Or Dc) At Each Station. (g) The Host Ac Will Provide Data Network Access At Each Station. (3) The Fwpo Requests The Following Information: (a) Provide A System Description And The Capabilities Of The Le System. (b) Provide A Rough Order Of Magnitude Cost For A Le System And An Estimate Of Operational Costs (maintenance, Field Support Representative, Consumables). (c) As An Original Equipment Manager, What Intelligence, Surveillance, And Reconnaissance Integration Companies Have You Worked With To Integrate Le Onboard Ac? Describe Your Approach To Engineering Services, Data Acquisition, Airworthiness Certification/qualification, And Any Foreseen Challenges. (d) What Are Your Past Or Current Government/department Of Defense Customers For The Le System, And What Were The Host Ac? (e) Do You Have An Existing Contract Vehicle That Would Ease Procurement Of The Le System? (f) When Is The Le System Available For Purchase, And What Are The Delivery Lead Times? (g) What Are Your Past Or Current Foreign Military Sales, And What Were The Host Ac? (h) Describe The Level Of Flight Simulation For The Le System If Applicable. (i) Describe Any Existing Training Packages For The Le System? (j) What Software Requirements Does The Le System Have? Are Application Programming Interfaces Available For Modular And Open Interfacing, Or Is Proprietary Software The Only Interface. (k) What Open Standards (future Airborne Capability Environment, Sensor Open System Architecture, Etc.) Does The Le System Conform To? (l) What Additional Equipment Is Required Onboard The Host Ac To Control And Communicate With The Le System? (radio Frequency/laser Datalinks, Data Processing, Command And Control Hardware, Antennas, Etc.) (m) What Is The Proposed Le System And Launcher Drag Count At The Host Ac Flight Profile Listed In The Requirements Section? (n) What Are The Power And Data Requirements For The Le System While On The Hard Point? What Interfaces Does The Le System Present? (o) What Is The Proposed Le System, Launcher, And Pylon Combined Weight? (p) In What Temperature Range Can The Proposed Le System Endure And Operate? (q) What Is The Operating Flight Profile Of The Proposed Le System? (r) What Is The Operating Range And Endurance Of The Proposed Le System? (s) Describe The Le System Recovery Concept Or Procedure If Applicable. If The Le System Is Not Recoverable, How Are Sensitive Technologies And Data Protected? (t) What Is The Launch Profile Of The Proposed Le System? (altitude, Airspeed, Angles Relative To Freestream). (u) What Is The Launch Mechanism Of The Proposed Le System? (gravity Or Pneumatic Separation, Rocket/turbojet Ignition, Drag Chute, Etc.). (v) What Sensor Or Capability Does The Proposed Le System Currently (or Is Targeted To) Carry? (w) How Modular And Open Is The Le System Design To Accept Alternative Payloads And Capabilities? (x) What Is The Technology Readiness Level (trl) Of The Le System? What Type Of Flight Testing Has Been Accomplished? What Is The Forecast Trl Development Plan? Describe The Activities Used To Acheive The Provided Trl. (y) What Is The Level Of Repair Required? Will The Vendor Provide Repair Instructions/technical Data? the Fwpo Intends To Conduct Individual Conference Calls With The Viable Respondents As Necessary. The United States Government (usg) May Conduct An Informal Evaluation To Determine The Capability Of A Respondent’s System. 3. Unclassified Responses Requested: the Government Is Interested In Receiving Meaningful Feedback On Le For Air Platforms That Meet The Proposed Flight And Carriage Envelope Requirements Along With Answers To The Questions Listed Above. Interested Sources That Possess The Technical Capability And Resources To Fulfill The Government’s Requirements Stated Herein Are Invited To Provide A Capability Statement Describing How You Would Meet The Above Requirements. if An Offeror Has Multiple Le Systems That Meet The Requirements, The Usg Welcomes Separate Rfi Submissions For Each Individual Platform. 4. Responses no Presentations Are Requested At This Time. Report Format Shall Be A Microsoft Word Document File Or Adobe Pdf. Font Size Should Be 12-point, Times New Roman Or Arial. Contractor Responses Should Include A 1-page Summary With A Short Description Of Your Capabilities And No More Than 20 Additional Written Pages With Details Within The Report. 5. Submission submit Rfi Questions No Later Than (nlt) 15 January 2025 At3:00 P.m. Eastern Standard Time(usg Reserves The Right To Not Respond, Or To Publish All Questions And Answers At Sam.gov). Submit Rfi Synopsis Responses And Comments Via Email Nlt 7 February 2025at 3:00 P.m. Eastern Standard Time To The Following Address: Laquita.l.mox.civ@army.mil And Benjamin.r.may4.civ@army.mil.

Details: Description Supply And Delivery Of Multi-beam Echosounder And Current Profiler Multi Beam Echosounder For Various Research Application Application: Fishery Research Method Volume Backscattering Of The Water Column And Shoal Isolated Fish Target Measurement Morphological Indicators, Height, Elongation, Volume Backscattering Of The Shoal Internal Density Structure Of The Shoal Shoal Dynamics Technology Unique Key Features: Multibeam Sonar / Mills Cross Antenna (along And Across Track Beam Forming) Dual Symmetrical 256 + 256 Beams Of 1.6° Each, Spacing 0.5° Modular System From 1 To 3 Sonar Antenna Units (saus) 7.5 Cm Radial Resolution In All Ranges 8000 Acoustic Samples Per Beam At 600 M Range Customized Number Of Swath* And Echogram Forming Volume Coverage 120° X 120° Stabilized For Each Sau 150 Khz / 4 Kw / Chirp & Cw Biomass Assessment Range From 5 To 450 M Bathymetry Production Up To 600 M Multi Beam Technical Description (hardware) Sonar Antenna Unit (sau) For Portable Model Mounting Flange And Screws Beam Former Processor Unit (bfu) + Ac Power Cable Viewer Processor Unit (vpu) + Ac Power Cable Wireless Qwerty Keyboard (for Vpu) Wireless Trackball (for Vpu) Transducer Cable (20 M) Cable Gland Ethernet Cable (30 M) + 1 Rj45 Connector Vpu Dongle Installation Checklist Installation Manual Operation Manual Packing List Ue Declaration Of Conformity Certificate Of Warranty Customer Satisfaction Survey Calibration Certificate (for Portable Model) Multi Beam Technical Description (software) Advanced & Versatile Graphical Unit Interface Operation Mode Swath And Echograms Real Time Re-construction Of Echogram Sectors Full Resolution Zooms 2d And 3d Ecosystem Mapping And Analysis Biomass Extraction And Analysis Seabed Mapping In Situ Calibration Post Processing Of Data Specifications: Applications: Research Array Steerable: Symmetrical Dual Multibeam Modular Multi Head Sonar: One To 3 Saus Driven With Data Fusion Controlled By Gui Mounting Applications: Downward Looking / Side Looking / Forward Looking Number Of Elements: 64 Across + 64 Along Number Of Beams: 256 + 256, Spacing 0,5°, Split Beam Frequency: 150 Khz Modulation: Cw And Chirp Transmission Power: 2 Kw For Fishery (4 Kw Optional) Beam Stabilization: Tx + Rx, Built-in Mru Beam Resolution: 1.6° Angular / 7.5 Cm Radial Acoustic Sampling In Water Column: 8000 Samples @ 600 M Range Triple Echograms From All Swaths: Adjustable From 1° To 120° Each Typical Range Biomass: @ 500 M, Bathymetry @ 600 M Volume Resolution: 0,6 M3 @100 M Volume Coverage: 120° X 120° Along-track Swaths: Desired Number Of Swaths, 120° / Tilt 90° To 50° Port & Starboard Across-track Swaths: Desired Number Of Swaths, 120° / Tilt 90° To 50° Port & Starboard Echosounder From Across-track Swaths: Desired Number Of Echograms / Opening Angle From 0° To 120° Echosounder From Along-track Swaths: Desired Number Of Echograms / Opening Angle From 0° To 120° Echosounder & Swath Zooms: Desired Number Of Detailed Dynamic Zooms From Echograms And Swaths Echosounder Dynamic Reconstruction: Real Time Reconstruction Of Echogram Sectors, Orientation & Opening Angle Signal Processing: Sv, Ts, Normalized Split Beam Ts Accuracy: 0,1 Db (@ +20/-20° Tilt Angles) Split Beam Target Positioning Accuracy: 0,15° Sed Fish Extraction: Up To 200,000 Single Fish Detection Bathymetry Swath Coverage At 100 M Depth: 370 M Across Track / 370 M Along Track (120° Opening) Bathymetry Real-time Production: Equipment Sounding Data Does Not Allow Navigation Safety As Far As Regulation Is Concerned Pelagic Biomass Coverage At 100 M: Depth 370 M Across Track / 370 M Along Track (120° Opening) Semi-rugged Laptop Cpu Intel Core I5 6th Gen Storage 1tb Ssd Memory 16gb Display 14" Hd Touchscreen Non-touch Operating System Windows 10 Pro Camera Webcam Graphics Card Intel Hd Graphics 520 Keyboard Emissive Backlit Keyboard Ports And Interfaces 3 X Usb 3.0 (includes 1 High Powered 1.5a Usb) Hdmi 10/100/1000 Ethernet Headphones/mic Jack Sd Card Reader Port Replicator Connector Vga Serial (true) Insertable Smartcard Reader Dvd Drive Intel Dual Band Wireless-ac 802.11a/b/g/n/ac Bluetooth V4.1 + Edr (class 1) Mil-std-810g Certified (3' Drop, Shock, Vibration, Sand, Dust, Altitude, High/low Temperature, High Temperature Tactical, Temperature Shock, Humidity) Ip51 Certified Note: On-site Local Training For Small Group Atleast 5 Individuals Training From Service Engineers Provision Of Training Certificate From Deployment Operation, Basic Trouble Shooting, And Data Processing Parts And Accessories Must Be Available For Atleast 5 Years 5 Years Service Warranty On Parts And Services Lifetime After Sales Service Delivery Period: 60 Days Upon Receipt Of Ntp Place Of Delivery: Nfrdi, Quezon City Current Profiler Head Type: 400khz Aqp Standard Head Acoustic Frequency: 400khz Pressure Sensor: 0-100 M Maximum Cell Size: 8 Meters Maximum Number Of Cells: 200 Cells Weight In Air: 3.7kg Internal Memory: 16gb Sd Card Data Logger With Compass & Tilt Sensor Instrument Housing: Standard Housing For Two Batt Or One 100wh Batt Harness For Options: Rs-232+ Analog In Housing For Two Batteries 300m & 6000m Cable For Impulse Connectors: 5m Rs232 Poly Cable With 8-pin Connector With Usb Antifouling Patches: Antifouling Patches Aqp 400khz Profiler 400khz With Laptop Inclusion For Software Processing Windows 10 Home, Inter I5-1135g7, Geforce Mx 350, 15.6 Full Hd, 8gb Ddr4, 512 Gb M.2 Pcie Nvme Ssd, Ms Office Home Ans Student 2019, English Internation Keyboard With Numeric Keypad, 2 Usb 3.2, 1 Usb 2.0, 1 Audio Jack, 1 Hdmi 1.4, 1 Sd Card Slot Lifetime Free Service Warranty Preventive Maintenance Should Be Served By A Certified Service Engineer At Least 2 Years Training On The Use, Care And Maintenance Of The Equipment Note: On-site Local Training For Small Group Atleast 6 Individuals Training From Service Engineers Provision Of Training Certificate From Deployment Operation, Basic Trouble Shooting, And Data Processing Parts And Accessories Must Be Available For Atleast 5 Years 5 Years Service Warranty On Parts And Services Lifetime After Sales Service Delivery Period: 60 Days Upon Receipt Of Ntp Place Of Delivery: Ffrdc, Taal, Batangas

Details: Description Item Number Description Qty Unit Estimated Budget 1 (hand Held) Portable Ultrasound Unit 2 Units 1,800,000.00 General Specification Probe Characteristics • 128 Physical Channel Beamforming • Black-and-white Mode For Displaying Anatomy In Real-time • Color-coded Overlay For Real-time Blood Flow Imaging • Harmonic Imaging For Increased Signal-to-noise Ratio And Reduced Artifacts From Side Lobes, Grating Lobes And Reverberations, Resulting In Superior Tissue Definition And Reduced Speckle Artifacts. With The Greater Penetration Of Lower Ultrasound Frequencies, High-quality Harmonic Imaging At Greater Depth Can Be Performed. • Selectable Centerline Marker • Selectable Focal Zone Marker • Selectable Tgc Control With 6 Depth-dependent Gain Controls • Total Scan Time Of 50 Minutes With Fully Charged Battery (with 80% Black And White, 20% Color Imaging) • Any Qi-compliant Wireless Charger Can Be Used To Charge Probe • Recharge Battery In 75 Minutes From 10% To 90% Battery Capacity • Dimensions: 131 X 64 X 31 Mm • Weight: 205 +/- 3 Grams • Ip67 Rated Curved Array Transducer For Deep Scanning • Specific Clinical Applications And Exam Types Include: Abdominal, Fetal/obstetrics, Gynecological, Urology, Thoracic/lung, Cardiac (adult And Pediatric, 40 Kg And Above), Vascular/peripheral Vascular, Musculoskeletal (conventional), Pediatrics, Interventional Guidance (includes Free Hand Needle/catheter Placement, Fluid Drainage, Nerve Block And Biopsy) • Broad-bandwidth Curved Array: From 2 - 5 Mhz With Center Frequency Of 3.3 Mhz • Number Of Elements: 128 • Footprint: 64 Mm X 16 Mm (lens) • Viewing Angle: 60° • Depth: Up To 24 Cm Linear Array Transducer For Shallow Scanning • Specific Clinical Applications And Exam Types Include: User Interface The Device Offers Ultrasound Imaging With A Minimized Number Of Keys And Intuitive Thumb-controllable Touchscreen User Interface. The Device App Supports Portrait As Well As Landscape Mode To Optimize Image Size And Ergonomics For Different Use Scenarios. • Single Key/gesture To Control Freeze/unfreeze, Store, Color On/off, Gain And Depth Control • 2 Steps To Change Preset With Appropriate Transducer • 2 Steps To Start Reviewing Images From An Exam • Presets With Optimized Settings For Imaging Different Organs. User- Selectable Default Preset For Immediate Use After Starting The App. • Measurements: Distance, Ellipse • Device Configuration And Management Tools In Easy Reach Through Swiping In Menu: • Enablement Of Tgc Controls, Preview Mode, Storage Of Binary Images •setting Auto Freeze Time, Video Duration • Configuration Of Probe Button Function (freeze Or Store) • Download User Manual In Selectable Language To Device App •diagnostics In Device App With Ability To Upload Lg Files To Manufacturer Server • Direct Access To Customer Support Information •link To Cloud-based Educational Materials • Information About Software Status Of Probe And App With Ability To Un- And Re-register Data Storage Patient Data Identification: • Manual Data Entry Of Patient Information For An Exam • Select From Dicom Modality Worklist On Request. Such Worklist Supports Consistent Labeling Of Images, Video Clips And Exams Before Export To Dicom Pacs. Exam Data On Device • Data For Up To 500 Exams Can Be Stored On Mobile Device • Data Is Stored In Generic Formats: Jpg For Still Frames, Mpg For Videos • Complementing Storage Of Binary Image Data Can Be Selected. Such Data Could Be Useful For Further Image Analytics In Collaboration With Manufacturer. • Data Is Organized As Individual Examinations With Collection Of Images And Can Be Linked With Patient Identification • All Stored Data Can Be Recalled For Review Data Export • Anonymized Images And Videos Can Be Shared With Other Apps Available On Smart Device • Images, Video Clips Or Exams With Or Without Patient Information Can Be Wirelessly Exported In Generic Formats (jpg, Mp4) To Shared Network Folders • Images, Video Clips Or Exams With Patient Information Can Be Wirelessly Exported In Dicom Format To Dicom Pacs Supported Dicom Services • Verify • Modality Worklist • Store • Storage Commitment • Secure Dicom (tls) Data Security • Secured Data At Rest: O Device App Starts Only After Confirmation Of Mobile Device Protection With User Authentication • Images And Other Patient Information Data Are Stored In Private Space Of Device With No Access From Other Apps On Mobile Device • Images Are Stored On Device Without Embedded Patient Identification And Linked With Encrypted Patient Database • Fips 140-2 Compliant Database Encryption (aes-256 Bit Encryption) • User Selectable, Additional Pin Protected Access To Patient Data On Device App • Wiping Off Exam Data After 10 Attempts With Incorrect Pin • Secured Data On The Move: • Images Are Anonymized Before Being Shared With Other Apps On The Mobile Device • Support Of Enterprise-grade Wireless Encryption Standards Including Eap And Wpa2 (psk) • Tls Encryption With Optional Peer Authentication To Support Secure Dicom Transfer • Configurable Time Period For Image Removal On The Device After Export To A Dicom Pacs Server Standard Configuration The Following Items Are Included In The Standard • Device Offering: • Device Cl Probe • Device App (device For Ios And Device For Android) • Protective Carrying Case • Hardcopy Quick Start Guide • Electronic Instruction Use Guide • Wireless Charger Pad Including Micro-usb • Cable Country-specific Ac Adapter Available Accessories • Hardcopy User Manual In Different Languages • Additional Protective Carrying Case • Additional Wireless Charger Pad • International Ac Adapters Supported Mobile Platforms Operating System Options • Android Phones And Tablets With Os Version 9, 10 Or 11, Device With 0x64 Arm Based Cpu Architecture And 64-bit Kernel, Android Open Gl Es 3.0, And Compatibility With Google Play Store Or Its Equivalent • Ipad And Iphone Devices With Ios 13 Or 14 Or Its Equivalent Screen Requirements • Size: From 5 To 20 Inches • 960 X 640 (or 640 X 960) Pixel Or More Internal Memory Requirements • 8gb Or More Connectivity Requirements • Ieee 802.11n • Peer-to-peer Connectivity • Bluetooth Ble 4.0 Security Requirements • Wpa2 • Data On Device Must Be Encrypted And Authentication Enabled User Support Tools Device Family Web Portal • Online Services To Enhance The Device Experience By Providing Resources, From Product Information To Clinical And Service Support • Additional Educational Resources Will Be Posted On The Device Web Portal, Including Webinars, Thought Leadership, Further Online Programs And Training Opportunities Ultrasound Education Solutions To Help Users Get Familiar With Common Point-of-care Applications And Improve Ultrasound Skills And Knowledge, Two Digital Education Solutions Are Available Via Our Partners. Point Of Care Ultrasound Focusclass By 123 Sonography • This Course Includes Access To Five Hours Of High-quality Video Content, Easy-to-follow Hands-on Demos, Practical Clinical Examples And Proven Didactive Principles To Help Increase Competence And Confidence. This Program Is Designed For Primary Care Covering A Variety Of Ultrasound Exam Types Including Cardiac, Ob, Abdominal, Lung And Joints • Provides Convenient Ultrasound Education Through Integrated Didactic Instruction, Hands-on Training, And Knowledge Assessment. A Portable, Virtual Ultrasound Training Experience Utilizing Real Patient Cases With A Broad Spectrum Of Normal And Pathologic Conditions. This Offering Includes A Sonosim Probe, Sonosim Drive, And Your Choice Of Five Modules Immediately Accessible Online – Choose From A Wide Selection Of Modules Including Anatomy, Physiology, And Clinical Procedures. Safety Conformance Safety Classification • Device Cl Probe Is Classified As Internally Powered Medical Electrical Equipment With Type Bf Applied Parts According To Iec 60601-1v • Device Cl Probe Is Ce-marked According To Mdd (93/43/eec), Red (2014/53/eu), Rohs (2011/65/eu), And Is Compliant To 2012/19/eu (weee) • Device For Android And Device For Ios Are Ce-marked According To Mdd (93/42/eec) Device Conforms To Applicable Clauses Of The Following Safety Standards: • Iec 60601-1 Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance • Iec 60601-1-2 Medical Electrical Equipment – Part 1-2: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Electromagnetic Disturbances – Requirements And Tests (group One, Class B Per Cispr 11 / En 55011) • Iec 60601-2-37 Medical Electrical Equipment – Part 2-37: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Medical Diagnostic And Monitoring Equipment Iec 60601-1-11 Medical Electrical Equipment – Part 1-11: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Requirements For Medical Electrical Equipment And Medical Electrical Systems Used In The Home Healthcare Environment Iec 60601-1-12 Medical Electrical Equipment Part 1-12: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Requirements For Medical Electrical Equipment And Medical Electrical Systems Intended For Use In The Emergency Medical Services Environment En 13718-1 Medical Vehicles And Their Equipment –air Ambulances Part 1: Requirements For Medical Devices Used In Air Ambulances En 1789 Medical Vehicles And Their Equipment –road Ambulances Iso 10993-1 Biological Evaluation Of Medical Devices Part 1: Evaluation And Testing Within A Risk Management Process Iec62304 Medical Device Software – Software Life Cycle Processes. Iec62366-1 Medical Devices – Part 1: Application Of Usability Engineering To Medical Devices - 1 Gallon Ultrasound Gel Tablet General Specification Processor • A14 Bionic •6-core Cpu •4-core Graphics •16-core Neural Engine Storage & Ram •64gb/256gb • 4 Gb Lpddr4x Sdram Display • Liquid Retina Display • Led Backlit Multi‑touch Display With Ips Technology • 2360-by-1640-pixel Resolution At 264 Pixels Per Inch (ppi) • True Tone • 500 Nits Brightness • Fingerprint-resistant Oleophobic Coating • Supports Apple Pencil • (usb-c) • Supports Apple Pencil • (1st Generation) Battery & Charging • Usb-c Port •7,606 Mah Li-ion/•built‐in 28.6‐watt‐hour Connectivity •wi-fi 6 (802.11ax) With 2x2 Mimo •simultaneous Dual Band •bluetooth 5.2 Landscape Stereo Speakers •dual Microphones For Calls, Video Recording, And Audio Recording •umts/hspa/hspa+/dc‑hsdpa •5g (sub-6 Ghz)3 •gigabit Lte (up To 32 Bands)3 •gps/gnss •data Only8 •wi-fi Calling3 -certificate Of Good Standing From 2 Institutions Using This Ultrasound Unit -training And Certification Of Health Personnel To Use The Ultrasound Unit Xxxxxxx Total: 1,800,000.00

Details: Nsn 7h-2835-010137492-a1, Tdp Ver 003, Qty 4 Ea, Deliver To W62g2t, W1a8 Dla Dist San Joaquin, Tracy, Ca 95304-5000, Induction Niin Is 7h, 2835, 010137492, A1, Seal,balance, L16742p02. The Government Does Not Own The Data Or The Rights To The Data Needed To Purchase / Contract Repair Of This Part From Additional Sources. It Has Been Determined To Be Uneconomical To Buy The Data Or Rights To The Data. It Is Uneconomical To Reverse Engineer The Part.interested Parties May Obtain Copies Of Military And Federal Specifications And Standards, Qualified Products Lists (qpls), Qualified Product Databases (qpds), Military Handbooks, And Other Standardized Documents From The Dod Single Stock Point (dodssp) At Document Automation And Production Service (daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assist Help Desk At 215-697-2667 Or 215-697-2179(dsn: 442-2667), Or Mail Their Requestdla Document Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094.the Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotations Or Capability Statements. This Notice Of Intent Is Not A Request For Competitive Proposals. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement.award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation.based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify To The Contracting Officer Their Interest And Capability To Satisfy The Government's Requirement With A Commercial Item Within 15 Days Of This Notice. One Or More Of The Items Under This Acquisition Is Subject To: Free Trade Agreements, If Dfars Clause 252.225-7036 Buy American Act--free Trade Agreements--balance Of Payments Program, Is Included In The Solicitation. The World Trade Organization Government Procurement Agreement And Free Trade Agreements, If Dfars Clause 252.225-7021 Trade Agreements, Is Included In The Solicitation. The Government Intends To Add An Option Quantity To The Resultant Contract. Inreference To The Option Quantity, The Government May Increase The Quantity Of Supplies Called For In The Schedule At The Unit Price Specified. The Contracting Officer May Exercise The Option By Written Notice To The Contractor Within The Number Of Days In Far 52.217-6 Herein. Delivery Of The Added Items Shall Continue At The Same Rate As The Like Items Called For Under The Contract, Unless The Parties Otherwise Agree.

Description: Contact Information|4|n712.5|aeq|717.605.1303|lance.k.geesey.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version|8|x||x|||||| time Of Delivery (june 1997)|20|0001aa|23|365 Days|0001ab|22|365 Days|0001ac|1065|365 Days|0001ad|1065|365 Days||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|combo Invoice And Receiving||tbd|n00104|tbd|tbd|see Schedule|see Schedule|see Schedule||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| small Business Subcontracting Plan (dod Contracts)- Basic (dec 2019)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| small Business Subcontracting Plan (sep 2023)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| critical Safety Item (aug 2011)|4||||| contractor Purchasing System Administration-basic (may 2014)|1|x| limitations On Pass-through Charges (jun 2020)|1|| requirements For Certified Cost Or Pricing Data And Data Other Than Certified Cost Or Pricing Data-modifications (nov 2021))|7|||||||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| small Business Program Representations (feb 2024)|4||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|13|334511|1350 (# Of Employees)|||||||||||| cost Accounting Standards Notices And Certification (deviation 2018-o0015)(may 2018))|1|| type Of Contract (apr 1984)|1|firm Fixed Price| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is: 1. Extend Solicitation Close Date, As Indicated. 2. Update Clauses, As Indicated. \ all Freight Is Fob Origin. this Request For Proposal Is For A Buy. the Resultant Award Of This Proposal Will Be Issued Bilaterally, Requiring Thecontractors Written Acceptance Prior To Execution. verify Nomenclature, Part Number, And Nsn Prior To Responding. government Source Inspection Is Required. unit Price:__________ firm Total Price:__________ contractor Cage: _______ inspection & Acceptance Cage, If Not At Source:__________ offerors Must Complete Section B, All Other Applicable Sections, As Well Asall Representations And Certifications With Applicable Fill-ins. Offerorswhose Company Size Is Greater Than The Size Standard For The Applicable Naicsin Far 52.204-8 Herein Shall Submit A small Business Subcontracting Plan Withtheir Proposal, In Accordance With Far 52.219-9. the Vendor Shall Return The Completed Full Text Version Of Far 52.209-13 Withtheir Proposal. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The T/rimm,gen 5.3.1 . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-130 | | |n |121116|a| | | 3. Requirements 3.1 Cage Code/reference Number Items - The T/rimm,gen 5.3.1 Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 8624495-3; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. date Of First Submission=asreq ;block 4: Both Tier 1 And Tier 2 Functional Areas Shall Be Delivered In The Reporting Entity's Format Of Choosing, So Long As If Fulfills The Requirements Of The Approved Osd Ddca Contract Csdr Plan (included As A Contract Attachment) And Is In Accordance With the Did. block 5: Perform In Accordance With Statement Of Work Paragraph 7. block 9: No Distribution Statement Required. Distribution Statements Governed By Dodi 5230-24 "distribution Statements On Technical Documents" Do Not Apply To Financial Data Including Software Resource Data Reports (srdrs). block 10 - 13: Submit At Frequencies Specified In The Approved Osd Ddca Contract Csdr Plan. block 14: Submit Electronically Using The Csdr-sr Website At Https://cade.osd.mil. Data Submitters Must Register Through The Dcarc Website And Possess A Dod-approved Eca Digital Certificate Or Dod-issued Cac To Obtain A Dcarc Portal Account And Be Authorized To upload Content. Users Can Obtain Access By Submitting User Information About Themselves And Their Organizations To The Dcarc Portal And Requesting A Csdr Submitter User Role. All Dcarc Portal Accounts Need To Be Renewed At Least Annually. ; date Of First Submission=asreq ;block 4: The Quantity Data Report Shall Be Delivered In Accordance With The Approved Osd Ddca Contract Csdr Plan (included As A Contract Attachment) And The Did. block 5: Perform In Accordance With Statement Of Work Paragraph 7. block 9: No Distribution Statement Required. Distribution Statements Governed By Dodi 5230.24 "distribution Statements On Technical Documents" Do Not Apply To Financial Data Including Software Resource Data Reports (srdrs). blocks 10-13: Submit At Frequencies Specified In The Approved Osd Ddca Contract Csdr Plan. block 14: Submit Electronically Using The Csdr-sr Website At Https://cade.osd.mil. Data Submitters Must Register Through The Dcarc Website And Possess A Dod-approved Eca Digital Certificate Or Dod-issued Cac To Obtain A Dcarc Portal Account And Be Authorized To upload Content. Users Can Obtain To The Dcarc Portal And Requesting A Csdr Submitter User Role. All Dcarc Portal Accounts Need To Be Renewed At Least Annually. the Prime Reporting Entity Is Responsible For Flowing Down Existing Csdr Requirements Contained In Their Prime Contracts To All Subcontracts That Meet The Reporting Thresholds Specified In The Dodi 5000.02, Or As Required By The Cwipt. This Includes Requiring subcontact Reporting Entities To Electronically Report Directly To The Dcarc Using The Csdr-sr System. The Prime Reporting Entity Shall Be Required To Work With The Cwipt And All Appropriate Subcontract Reporting Entities To Prepare Separate Subcontract Csdr plans For Submission To The Dcarc For Ddca Approval. ;

Details: Description Invitation To Bid For The Supply, Delivery, Subscription, Installation, And Configuration Of Various Ict Equipment And Network Softwares 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Sixteen Million Four Hundred Thirty-two Thousand Pesos (php16,432,000.00) With Project Identification Number Da-rfo 1-2025-goods-032 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot, To Wit: Project Title Abc (php) Lot 1: Supply And Delivery Of Various Ict Equipment 7,912,000.00 Lot 2: Supply, Delivery And Subscription Of Various Ict Software 2,900,000.00 Lot 3: Supply, Delivery, Installation And Configuration Of Various Ict Network Equipment 4,620,000.00 Lot 4: Supply, Delivery, Installation And Configuration Of 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1,000,000.00 Total 16,432,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Lot No. Particulars/descriptions Quantity Unit Cost Total Cost 1 Supply And Delivery Of Ict Equipment For Office Productivity Of Da-rfo 1 Employees 1 Lot 7,912,000.00 7,912,000.00 1) Laptop (high End, Branded) Processor: 13th Gen, 10 Cores, 16 Threads, 24mb Smart Cache, Up To 4.90 Ghz Max Turbo Frequency, 45w Base Power, Maximum Turbopower 105w Display: 15.6inch Fhd (1920x1080), 144hz, Ips-level Memory: 16gb Ddr5-5200 Max 64gb 2 Slots Storage: 1tb M.2 Ssd Slot (nvme Pcie Gen4) Graphics: 4608 Cuda Cores With Boost Clock 1230 - 2175 Mhz, 8gb Gddr6 Webcam: Hd Type (30fps@720p) Communication: Gb Lan 802.11 Ax Wi-fi 6 + Bluetooth V5.2 1x Type-c (usb3.2 Gen1 / Dp) 2x Type-a Usb3.2 Gen1 1x Type-a Usb2.0 Battery: 3-cell 53.5 Battery (whr) Ac Adapter: 200w Adapter Operating System: Licensed Windows 11 4 Units 2) Desktop Computer (high End, Branded) Lga1700 14th Generation Processor Family 20 Mb L3 Cache, 10 Cores, 16 Threads 16gb Ddr4 3200 512gb Nvme Gen 4 Ssd + 1tb Hdd 7200rpm Dedicated 6gb Ddr6 Graphics Card With Wi-fi And Bluetooth With Wireless Keyboard And Mouse Combo With 23.8 Inches Monitor Native 1920 X 1080 With Licensed Windows 11 Os Installed 10 Units 3) Laptop (regular, Branded) 13th Generation Mobile Processor 16gb 4800mhz Ddr5 512 Gb Nvme Ssd 15.6" Full Hd Wireless Ieee 802.11 A/b/g/n+ac+ax Capable 2x Usb Gen 3.2 Ports 1x Usb 3.2 Type C Port Built-in Webcam And Microphone Rechargeable Built-in Li-ion Battery With Licensed Windows 11 Os Installed 19 Units 4) Desktop Computer (regular, Branded) Lga1700 14th Generation Processor Family 8 Gb Memory Ddr5 Memory 512 Gb Nvme Ssd Gen. 4 23.8 Inch Full Hd Native 1920 X 1080 With Mouse And Keyboard With Licensed Windows 11 Os Installed With Lan, Wifi And Bluetooth Vga/dvi-d, Hdmi Or Display Port 14 Units 5) Printer 3-in-1 W/ Adf, A3 Color Printer 800 Nozzles Black, 256 Nozzles Per Color (cmy) Can Print Up To A3+ Size Paper Wifi, Wifi Direct And Ethernet Connection 4800 X 2400 Dpi Hi-speed Usb 2.0 Connectivity Duplex Printing Capable, Up To A3 Scan And Copy Thru Adf Scan And Copy Thru Glass Bed Bi-directional Printing Up To 25 Ipm Printing Speed With Consumables 100-240v Voltage, 50-60hz Frequency 10 Units 6) Portable Printer Print Speed Up To 14ppm With Built-in Battery Colour Lcd Panel Wifi And Wifi Direct Connectivity Bi-directional/uni-directional Printing Hi-speed Usb 2.0 Connectivity 14 Units 7) Multi-function Printer (for Pvc Id Card) Friction Feed Pvc Id Card Printing Enabled Micropiezo Printhead Bi-directional Printing 1.5pl Minimum Ink Droplet Size Maximum Print Resolution Of 5760 X 1440 Dpi With Variable-sized Droplet Technology Usb 2.0 Connection Wireless Capable Esc/p-r, Esc/p Raster Language With Bundled Consumables With Additional 1 Set Extra Consumables 3 Units 8) Multi-function Printer Printer Type: Print, Scan, Copy And Fax Maximum Resolution: 4800 X 1200 Dpi Print Speeds Up To 15.5ipm For Black And 8.5ipm For Colour Auto-duplex Printing Adf Capability Ethernet & Wi-fi Direct Colour Touch Lcd Screen Usb 2.0 Connectivity 15 Units 9) 3-in-1 Network Printer/ Scanner/ Photocopier Printer Type: Print/copy/scan/fax Precisioncore Printhead Bi-directional Printing 4800 X 1200 Dpi Maximum Resolution 2-sided Printing Capable 600 X 600dpi Copy Resolution Friction Paper Feed Front And Rear Tray With Lcd Screen Network: Ethernet, Wi-fi Ieee 802.11b/g/n, Wi-fi Direct Usb 2.0 Connection Ac 220-240v 50-60hz Up To A3 And A3+ Paper Size Cassette Capacity Of 250 Sheets For A4 (80gsm) Rear Capacity Of 20 Sheets For A3+ (80gsm) Up To 5.0 Ipm Scan Speed @200dpi With Bundled Consumables With Additional 1 Extra Set Of Consumables With 1 Piece Maintenance Box 10 Units 10) Dot Matrix Printer Impact Dot Matrix 9-pin Wide Carriage Up To 496cpi Prints Up To 6-part Forms 15,000 Power On Hours Mtbf Usb 2.0, Bi-directional Parallel Supported Bi-direction With Logic Seeking 200 Million Strokes/wire Printhead Life 2 Units 11) Flatbed Scanner Minimum Technical Specifications: Colour Scanner A4 Sheet-fed, 3-pass Duplex Scanner Led Light Source 1,200 X1,200 Dpi Output Resolution 215.9 X 3,048 Mm Maximum Document Size Supports 50 Gsm – 120 Gsm Paper Thickness 50 Sheets Adf Capacity Scan Speed Up To 25ppm/10ipm (300 Dpi) 24 Units 12) Portable Document Scanner A4 Sheet-fed, Simplex Colour Scanner Optical Resolution: 600 X 600 Dpi Output Resolution: 50 – 1,200 Dpi 216 X 1,828.8 Mm Maximum Document Size Contact Image Sensors (cis) Compact Size And Footprint Powered Via Usb, Ac Adapter Or Built-in Battery Scan Speed Up To 4.0sec Per Sheet (on Battery) Usb 2.0, Wi-fi And Wi-fi A/p Mode Connectivity 20 Units 13) Projector (indoor) Native Resolution Full Hd (1080p) Large Screen Projection Up To 391" 3000 Lumens Of Colour And White Brightness Comes With Android Tv™2 Dongle And Chromecast Built-in™ 5w Speaker (with Enclosure) Life (normal / Eco): 6,000 / 12,000 Hours (normal / Eco) F-number: 1.44 Focal Length: 16.4mm Zoom Ratio: 1.0 – 1.35 (digital Zoom) Throw Ratio: 1.19 – 1.61 Usb Type A: 1 (for 2a Power Supply, Firmware Update And Copy Osd Settings) Usb Type B: 1 (for Firmware Update And Copy Osd Settings) Hdmi: 1 (hdcp 1.4) 10 Units 14) Dslr Camera 24.2mp Aps-c Cmos Sensor Dual Pixel Cmos Af Ii 4k30 Video, 4k60 With Crop; Hdr-pq 23 Fps E. Shutter, 15 Fps Mech. Shutter 2.36m-dot Oled Evf 1.04m-dot Vari-angle Touchscreen Lcd Multi-function Shoe, Wi-fi And Bluetooth 18-45mm F/4.5-6.3 Is Stm Lens Lithium-ion Battery Pack Charger For Battery Pack 8 Units 15) Portable Audio System (branded) Digital Wireless Microphone Included Output Power: At Least 1100 Watts 30hz-20khz (-6db) Dynamic Frequency Range With 3.5mm Audio Cable Input Bluetooth Connection Usb Playback Guitar And Microphone Input True Wireless Stereo Using Bluetooth Connection With Rca Output Microphone Specifications: Frequency: 2404 - 2478mhz Encryption: Aes - 128 Working Range: 30m (100ft) Latency: < 12ms Frequency / Channel Selection: Adaptive Channel Selection Frequency Response: 50hz - 15khz Dynamic Range: 100db@ 1k Hz Signal -to -noise: 59dba Thd: < 1% @ 94db Spl, 200 - 10khz Microphone Rechargeable Battery: 600mah, 3.7v Li-ion Battery Dongle Battery: 700mah 3.7v Li-ion Battery Playtime Of Microphone: Up To 20 Hours Playtime Of Dongle: Up To 12 Hours Microphone Battery Charge Time: < 2.5h In Off Mode Dongle Battery Charge Time: < 2.5h In Off Mode Microphone Head: 16mm Ecm Transmitting Power: < 10dbm Receiver Maximum Output Level: < 1v Rms 6 Units 16) Handheld Gps Receiver 2.2" Transflective, 65k Color Tft Display Type 240 X 320 Pixels Display Resolution 25 Hrs Battery Life Ipx7 Water Rating High-sensitivity Receiver 2 Aa Nimh Or Lithium Rechargeable Batteries And Charger Included 30 Units 2 Supply, Delivery And Subscription To Various Ict Software 1 Lot 2,900,000.00 2,900,000.00 1) Graphic Design Platform 1tb Of Cloud Storage 1000 Brand Kits 100m+ Photos, Videos, Graphics, Audio Ai-generated Writing And Designs Unlimited Premium Templates Ai Admin Controls Edit, Comment, And Collaborate In Real-time With Online Customer Support 3-year Subscription *1 Account = 3 Users 5 Units 2) Cad Modeling Software Civil-infrastructure/engineering Design And Documentation Software Supports Computer-aided Design And Building Information Modeling Site And Survey Workflows Drainage Design And Analysis Plan Production And Documentation Intersection Design Corridor, Geotechnical And Terrain Modeling Commercial New Single User With Electronic-license Delivery (eld) 1 Year Subscription 2 Units 3) Cad And Drafting Software With Specialized Toolsets Commercial New Single User 2d Crafting, Drawing & Annotation 3d Modeling & Visualization Architecture, Mechanical, Map 3d, Electrical, Plant 3d And Raster Design Toolsets Commercial New Single User With Electronic-license Delivery (eld) 3 Year Subscription 2 Units 4) Cad And Drafting Software With Specialized Toolsets Commercial New Single User 2d Crafting, Drawing & Annotation 3d Modeling & Visualization Architecture, Mechanical, Map 3d, Electrical, Plant 3d And Raster Design Toolsets Commercial New Single User With Electronic-license Delivery (eld) 1 Year Subscription 2 Units 5) Office Productivity Software On Premise - Open License Graphical User Interface/keyboard Driven Menu System Support In Inserting And Editing 3d Models Support To Scalable Vector Graphics (svg) With Filters Live Preview While Formatting With Built-in Language Translator Support For Touch-enabled Devices, Digital Pens And Mouse For Drawing Shapes, Writing Out Complex Math Problems And Highlighting Text. With Accessibility Checker With Support For International Standards 45 Units 3 Supply, Delivery, Installation And Configuration Of Ict Network Equipment Of Da-rfo 1 1 Lot 4,620,000.00 4,620,000.00 1) Network Firewall Subscription At Least 3yrs Throughput Ngfw, Ips & Threat Protection: 1.6, 2.6 & 1 Gbps Concurrent Ssl-vpn Users: 500 2.2 Gbps Application Control Throughput Capwap Throughput (http 64k): 15gbps Heat Dissipation: At Least 100.6 Btu/h 80plus Compliant Power Supply Efficiency Rating Ports: 2 Ge Rj45 Wan, 4 Ge Rj45 Or Sfp Shared Ports, 1 Console And Usb Port Concurrent Tcp Sessions: 1.5million 10,000 Firewall Policies Throughput Ipsec Vpn: 11.5 Gbps Compliance Fcc Part 15b, Class A, Ce, Rcm, Vcci,ul/cul, Cb, Bsmi Ac Power Supply 100–240v Ac, 50/60 Hz Form Factor (supports Eia/non-eia Standards) Rack Mount, 1 Ru With Complete Accessories & Compatible With Existing Network Setup. 1 Unit 2) Network Switch (access) 10/1g Uplink Ports Forwarding And Switching Rate: 261.9 Mbps & 176 Gbps Per Hour Mean Time Between Failures: At Least 503,400 Jumbo Frames Capacity: 9198 Bytes Flash And Dram: 4gb And 2 Gb Entries Of Flexible Netflow: 16,000 Flows On 24 Or 48 Port Gigabit Ethernet Models Bandwidth Stacking: At Least 80 Gbps Mac Addresses Total And Ipv4 Routes: At Least 16,000 And 11,000 Routing Entries For Ipv4 & Ipv6: 3,000 & 1,500 Qos Scale & Acl Entries: 1000 With Complete Accessories & Compatible With Existing Devices. 1 Unit 3) Wireless Lan Controller (bundled With 6-ap & Licenses) Fixed Service Port: Auto-negotiation 10/100/1000base-t, Auto Mdi/mdix Crossover Standard Rj45 & Usb Port Management Port 40w Max. Power Consumption 200,000 Hours Mean Time Between Failure (mtbf) At The Standard Temperature 2048 Maximum Number Of Configurable Access Points Default Number Of Manageable Access Point Of 32 448 Maximum Number Of Manageable Access Point Wlan Service: 2048 Maximum Wlan Id At Least 32,768 Mac Address Entries 4096 Of Virtual Lans Ipv4 Address Pools: 2,000 Ipv4 Addresses: 24,576 Ipv6 Address Pools: 256 Ipv6 Addresses: 2,048 Ieee 802.11 Protocols: 802.11, 802.11b, 802.11a, 802.11g, 802.11d, 802.11h, 802.11w, 802.11k, 802.11v, 802.11r, 802.11i, 802.11e, 802.11n, 802.11ac, And 802.11ax Ieee 802.11 Security And Encryption: Multi-ssid Mode,ssid Hiding Ieee 802.11i-compliant Psk Authentication, Wpa And Wpa2,wpa3: Wpa3-personal (sae), Wpa3-enterprise (ccmp, 128-bit), And Wpa3-enterprise (gcmp, 192-bit),wep (wep/wep128), Tkip, Ccmp, Anti-arp Spoofing User Access Management: Console Port Login, Telnet Login, Ssh Login, And Ftp Upload Maximum Number Of Stas Supported By The Built-in Portal Server:1,500 Number Of Acl Entries:65,536 Entries With Six (6) Compatible Wireless Access Point With Six (6) Licenses Included Bundled With Training And Certification With Complete Accessories. 1 Unit 4) Network Attached Storage (nas) 64 Bit Cpu Architecture Cpu Frequency: 2.6 / 3.1 Ghz System Memory 2gb Ddr4 Ecc Drive Bays: At Least 4 Compatible Drive Type: 3.5" Sata Hdd & 2.5 Sata Ssd External Ports: 2 Rj-45 1 Gbe Lan Ports, 1 Usb 3.2 Gen 1 Port Pcie Expansion: 1 X Gen3 X 2 Network Upgrade Slot System Fan: 40mm X 40mm X 3pcs 28.5 Db(a) Noise Level Power Supply Unit : 100 Watts Power Consumption: 37.93 Watts (access), 13.43 Watts (hdd Hibernation) Rohs Compliant Bundled With At Least 4 Hdd (16tb) With Complete Required Accessories 2 Units 5) Ups 10kva (rack-mounted) Capacity: 10kva Rackmounted With Battery Input: Voltage: 200-240v +/- 10% Voltage Range: 176-3000v +/- 10% (full Load) Frequency: 56hz - 64hz Battery: 16 X 12v/9ah Output Voltage: 220-240v +/- 10% Frequency: 50hz-60hz +/- 5% Transfer Time: 0 (ac To Battery), 0ms (inverse To Bypass) True Double Conversion Microprocessor Control Technology Ensures High Reliability Input Power Factor Correction Output Power Factor 0.8 Waveform (batt Mode): Pure Sine Wave With Complete Accessories And Warranty. 4 Units 6) Wireless Access Point Max Throughput Up To 400mbps At 2.4g, Up To 867 Mbps At 5g 1.267 Gbps Ofdm: Bpsk@6/9mbps, Qpsk@12/18mbps, 16-qam@24mbps, 64-qam@48/54mbps Protocol: Concurrent 802.11ac Wave2, Wave1, 802.11a/b/g/n Spatial Streams: 2.4g 2x2mimo 5g 2x2mimo Antenna: Internal Antennas（2.4g: 2dbi，5g: 2dbi） Operating Bands: 802.11b/g/n: 2.4g ~ 2.4835ghz, 802.11a/n/ac: 5g：5.150～5.250ghz，5.725～5.850ghz 11b: -91dbm (1mbps), -88dbm (5mbps), -85dbm (11mbps) 11a/g: -89dbm (6mbps), -80dbm (24mbps), -76dbm (36mbps), -71dbm (54mbps) 11n: -83dbm@mcs0, -65dbm@mcs7, -83dbm@mcs8, -65dbm@mcs15 11ac Ht20: -83dbm (mcs0), -57dbm (mcs9) 11ac Ht40: -79dbm (mcs0), -57dbm (mcs9) 20 Units 7) Unmanaged Switch Ports:16 X 10/100base-x Poe+ Ports, 2 X 10/100/1000base-t Ports With 2-port Gigabit Rackmount Poe Switch Layer Type: Unmanaged Switching Capacity:7.2 Gbps Forwarding Rate:5.36 Mpps Mac Address Table:8000 Fan: Fanless Port Surge:6kv 4 Units 8) Ups 1kva Available Capacity : 1kva / 600w Line Interactive Switching Ups 2 X 12v7ah Battery Input Power : 190~240va (50~60hz) Output Power : 220~230va (50~60hz) 24 Units 9) Drone (quadcopter) Gimbal:3-axis Flight Control System: Gnss Support Gps, Beidou, Galileo Maximum Operating Distance:9.3 Miles / 15 Km Battery Capacity:5000 Mah / 77 Wh Charging Temperature 41 To 104°f / 5 To 40°c Maximum Ascent Speed 17.9 Mph / 8 M/s Maximum Descent Speed 13.4 Mph / 6 M/s Maximum Wind Resistance 26.8 Mph / 12 M/s Flight Ceiling 3.7 Miles / 6000 M Image Sensor:4/3″-type Cmos Sensor Resolution Effective: 20 Megapixel (5280 X 3956) Focal Length: 24mm (35mm Equivalent) Field Of View: 84° Maximum Aperture: F/2.8 Minimum Aperture: F/11 Minimum Focus Distance:3.3′/1 M Rotor Configuration: 4 Operating Temperature:14 To 104°f/-10 To 40°c With Complete Accessories, Controller Device, Bag And Extra Batteries And Propeller. Bundled With Formal Drone Pilot And Safety Training, Drone Pilot License & Rpas Certifications Acquisition. 1 Unit 4 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1 Lot 1,000,000.00 1,000,000.00 Managed Switch Bandwidth Stacking: At Least 80 Gbps Entries Of Flexible Netflow: 32,000 On 24 Or 48 Port Multigigabit Models Stacking Switch Capacity & Forwarding Rate: 256 Gbps & 190 Mbps Jumbo Frames Capacity: 9198 Bytes Flash And Dram: 4gb And 2 Gb Forwarding And Switching: At Least 130.95 Mbps And 176 Gbps Per Hour Mean Time Between Failures: At Least 346,270 Mac Addresses Total And Ipv4 Routes: At Least 16,000 And 11,000 Routing Entries For Ipv4 & Ipv6: 3,000 & 1,500 Sfp Transceiver Module Hot Pluggable Sfp Msa Compliant To Maximize Uptime And Simplify Maintenance Modal Bandwidth Min :400 At Least 1804 Ft. Operating Distance Stackwise Cables Support 16 Gbps Speeds In Both Directions, Yielding A Traffic Total Of 32 Gbps Bandwidth Bidirectionally Cable Length:1.6 Ft Conductor: Copper Network Server Rack Cabinet Minimum Technical Specifications: Capacity: 22u With Exhaust Fans And Power Distribution Cables, I/o Ports And Accessories 1 Lot Roughing-in Materials For Horizontal And Backbone Distribution 1 Lot Roughing-in Materials For Fiber Backbone Distribution 1 Lot Mobilization / Demobilization 1 Lot Testing And Commissioning 1 Lot Preparation, Documentation Of As-built Plan Drawings And Turn-over Of Network Design And Diagram 1 Lot Cables, I/o Ports And Accessories 1 Lot Grand Total 16,432,000.00 All Equipment With 1 Year Warranty On Parts & Services. Drop Off Point: Da Rfo I, City Of San Fernando, La Union Delivery Schedule: 90 Calendar Days From Receipt Of Notice To Proceed (ntp). Delivery Of The Goods Is Required Within 90 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Project Title Bid Docs Fee Lot 1: Supply And Delivery Of Various Ict Equipment 10,000.00 Lot 2: Supply, Delivery And Subscription Of Various Ict Software 5,000.00 Lot 3: Supply, Delivery, Installation And Configuration Of Various Ict Network Equipment 5,000.00 Lot 4: Supply, Delivery, Installation And Configuration Of 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. Note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 1:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-032

Details: Nsn 7r-6635-015840561-sx, Tdp Ver 004, Qty 9 Ea, Delivery Fob Origin. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: This Advance Contract Award Notice (acan) Is A Public Notice Indicating To The Supplier Community That Agriculture And Agri-food Canada Intends To Award A Service Contract To A Pre-identified Supplier, Thereby Allowing Other Suppliers To Signal Their Interest In Bidding, By Submitting A Statement Of Capabilities. If No Supplier Submits, A Statement Of Capabilities That Meets The Requirements Set Out In The Acan, On Or Before The Closing Date Stated In This Acan, The Contracting Officer May Then Proceed With The Award To The Pre-identified Supplier. Requirements: Agriculture And Agri-food Canada Will Be Contracting Services From Neogen Canada Inc. To Process And Analyze Swine Tissue Samples Using Swine-specific Low-pass Skim Sequencing (skimseek) And Gencove’s Imputation Pipeline To Ensure Compatibility With Previous Projects. The Work Will Take Place Over A 27 Month Period As Follows: 1,400 Swine Samples Will Be Completed Before March 31, 2025, With 2,000 Samples Completed During Year 2, And 2,000 Samples Completed During Year 3. Criteria For Assessment Of The Statement Of Capabilities: Any Interested Supplier Must Demonstrate By Way Of A Statement Of Capabilities That It Meets The Following Requirements: Have Authorized Use In Canada Of Gencove’s Proprietary Pipeline For Genotype Imputation From Low-pass Whole Genome Sequencing. Contract Period: From January 2025 To March 31, 2027 Estimated Value: $ 309,600.00 Cad Pre-identified Supplier: Neogen Canada Inc. 7323 Roper Road Nw Edmonton Ab T6e 0w4 Sole Source Justification: Snp Panel Offered By Neogen (skimseek) Has A Unique Combination Of Genetic Markers. This Panel Has Been Used In Historical Samples (multiple Studies) And The New Samples Need To Be Compatible In Order To Be Able To Combine The Data Accurately. Neogen Has Exclusive Use In Canada Of Gencove’s Proprietary Pipeline For Genotype Imputation From Low-pass Whole Genome Sequencing, Which Utilizes A Combination Of Open-source And Custom Software To Deliver Accurate Variant Calls Across The Genome. Government Contracts Regulations Exception: Section 6 (d) Has Been Invoked For This Procurement As Only One Supplier (person/firm) Is Capable Of Performing The Contract. Acan Notice: You Are Hereby Notified That The Government Intends To Negotiate With One Firm Only As Identified Above. Should You Have Any Questions Concerning This Requirement, Contact The Contracting Authority. An Advance Contract Award Notice (acan) Allows Departments And Agencies To Post A Notice, For No Less Than Fifteen (15) Calendar Days, Indicating To The Supplier Community That It Intends To Award A Good, Service Or Construction Contract To A Pre-identified Contractor. If No Other Supplier Submits, On Or Before The Closing Date, A Statement Of Capabilities That Meets The Requirements Set Out In The Acan, The Contracting Authority May Then Proceed With The Award. However, Should A Statement Of Capabilities Be Found To Meet The Requirements Set Out In The Acan, Then The Contracting Authority Will Proceed To A Full Tendering Process. Statement Of Capabilities Closing Date And Time: The Closing Date And Time For Acceptance Of Statement Of Capabilities Is January 15, 2025 At 11:00 Am Cst. Suppliers Who Consider Themselves Fully Qualified And Available To Provide The Services Described Herein, May Submit A Statement Of Capabilities By Email To The Contact Person Identified In This Notice On Or Before The Closing Date Of This Notice. The Statement Of Capabilities Must Clearly Demonstrate How The Supplier Meets The Advertised Requirements. The Solicitation Number, Name Of Contracting Authority And Closing Date Of The Acan Must Appear Within Your Statement Of Capabilities. The Crown Retains The Right To Negotiate With Suppliers On Any Procurement. Contracting Authority: Desta Kissack, Supervisor, Procurement And Materiel Management Agriculture And Agri-food Canada Western Service Centre 4-303 Main Street Winnipeg Mb R3c 3g7 Phone: (204) 583-8127 Email: Desta.kissack@agr.gc.ca

Details: The U.s. Army Corps Of Engineers (usace) Walla Walla District Intends To Issue A Construction Solicitation For A Project Titled Little Wood River, Gooding, Idaho. The Work Is Located In Gooding, Idaho. This Will Be A Firm-fixed-price, Design Build Construction Contract. The Magnitude Of Construction Is Between $25,000,000 And $100,000,000. 100% Performance And Payment Bonds Will Be Required. The Government Expects To Award One Contract In October 2024. The North American Industry Classification System (naics) Code For This Project Is 237990 Other Heavy And Civil Engineering Construction And The Associated Small Business Size Standard Is $45 Million. This Solicitation Is Not Set Aside For Small Business, I.e. Unrestricted And Open To Both Small And Large Businesses the Solicitation Will Follow The Two-phase Design-build Selection Procedures As Outlined In Far Subpart 36.3. A Site Visit Will Be Offered During Phase Ii Of The Two-phase Selection Process. Only One Site Visit Is Expected To Be Offered. the Solicitation Is Expected To Be Made Available For Download On The Sam.gov Contract Opportunities Website In January 2024. Offerors Are Responsible For Checking The Referenced Page For Any Updates To The Notice. The Government Is Not Responsible For Any Loss Of Internet Connectivity Or For An Offeror's Inability To Access The Documents Posted At The Referenced Website. Proposals Will Be Due Approximately 30 Days After The Solicitation Is Posted. The Exact Proposal Due Date Will Be Indicated In The Solicitation. system For Award Management (sam): Offerors Must Register In The Sam At Https://sam.gov/content/home Prior To Receiving An Award. point Of Contact For This Procurement Is Preston Jones, Contract Specialist At Preston.e.jones@usace.army.mil all On-site Work Shall Be Performed In Accordance With The Corps Of Engineers Safety And Health Requirements Manual (em 385-1-1). the Contractor Will Be Responsible For Establishing And Managing An Effective On-site Safety And Health Program In Accordance With Em 385-1-1 That Will Require The Development And Submission Of A Comprehensive Project Specific Accident Prevention Plan For Government Acceptance. In Addition, The Contractor Will Be Required To Develop And Submit For Government Acceptance Activity Hazard Analyses For Each Phase Of Work And A Project Specific Fall Protection Plan That Comply With Em 385-1-1. use The Government-furnished Resident Management System (rms) – Contractor Mode To Record, Maintain, And Submit Various Information Throughout The Contract Period. Rms Is A Windows-based Program Capable Of Operating On A Stand-alone Personal Computer Or On A Network. The Government Will Make The Qcs Software Available To The Contractor At Time Of Notice To Proceed. the Project Will Involve The Development And Management Of Contractor Furnished Submittals For Items Such As Pre-construction Plans, Product Data, Test Reports, And Contract Close-out Documentation As Required By The Technical Specifications Of The Contract. summary Scope Of Work design: a 30% Conceptual Design Package Which Conveys The Government’s Design Intent Will Be Provided With The Phase Ii Solicitation. The Design Package Will Include Plans, Specifications, A Geotechnical Exploration Report, And A Recent Site Survey. The Contractor Will Be Responsible For Continuing This Design Package To Completion. Contractor-generated Cad Drawings Must Be In Bentley Dgn Format. construction: proposed Construction Features Are Divided Into Two Primary Categories: (1) Wall Repair/replacement And (2) Vehicle And Pedestrian Bridge Replacement. The Project Is A Lava Rock Wall Channel; The Channel Dimensions Are Approximately 24 Feet Wide, 8 Feet Deep, And 0.9 Miles Long. wall Repair/replacement Work May Include: Mortar Repointing, Concrete Walls, Concrete Blocks, Geotextiles, Drainage Culverts, Irrigation Systems, Fencing, Waterstop Installation, Road Reconstruction, Pavements, And Pavement Striping. bridge Replacement Work May Include: Demolition Of Roadway Culverts, Demolition Of Pedestrian Bridges, Traffic Control, Installation Of New Roadway Bridges, Installation Of New Pedestrian Bridges, And Road Reconstruction. The Bridges Will Include Reinforced Concrete Decks, Railings, Abutments, And Wingwalls.

Details: Description Terms Of Reference Procurement Of Preventive Maintenance Service Contract For The Hp Servers And Cisco Switches 1 Lot I Purpose Preventive Maintenance Service For The Hpe Servers And Cisco Switches Will Ensure That The Said Equipment Remains In Good Condition So As To Provide Continuous Uptime And Access To Data And Systems. Ii. Approved Budget For Contract (abc) The Abc Is Php700,000.00 For One Year Inclusive Of Government Taxes. Iii. Scope Of Work • Engagement Of A Service Provider For Preventive Maintenance Works. • Provide Service Level Agreement (sla) Which Defines Equipment Maintenance, Service Response Times, Etc. • Provide Replacement Of Equipment Or Parts Of The Same Or Alternative Specification Through Return Material Authorization (rma). • Provide Preventive Maintenance On A Quarterly Basis. Iv. Service Provider Qualifications • Service Providers Must Be In The Business For At Least Five (5) Years In Providing After-sales Services Of The Equipment To Be Maintained. • Service Providers Must Be Authorized By The Equipment Manufacturer To Support After-sales Services. A Photocopy Of The Latest Certification From The Equipment Manufacturer Should Be Submitted. • Service Providers Must Have At Least Two (2) Certified Engineers Who Are Regular And Locally Based Employees And Must Be Certified And Trained By The Hardware Manufacturer. A Photocopy Of The Certifications Valid For At Least Three (3) Years Should Be Submitted. A Certification From The Hr Or Admin Officer Of The Company Stating That These Employees Are Currently Employed To The Company Should Also Be Submitted. • Service Providers Must Have Support Services Available 24x7 Via Phone Or Email With A Response Time Of 2 To 4 Hours. Procedures On Support And Problem Escalation Should Be Submitted. • Service Providers Must Have At Least Two (2) Clients With The Last Two Years With Similar Contract Scope. V. Service Provider Deliverables 1. Corrective Maintenance A. Attend Service Calls Of Ipophl By Providing Immediate Telephone Support To Diagnose And Remedy Any Reported Technical Problem. B. Provide On-site Technical Support Engineers To Perform Fault Isolation And Resolution On The Reported Problem. C. Provide Necessary Spare Parts For The Purpose Of Maintaining The Equipment Listed In Annex "a". 2. Preventive Maintenance A. Perform Routine Preventive Maintenance Every Quarter With The Following Scope: 1. General Check-up Of The Equipment Or Hardware Covered Under The Preventive Maintenance. 2. General Check-up Of Any Program Or Software Used In The Operation Of Any Equipment Or Hardware. 3. Conduct A Complete Diagnostic Routine Within The System. 4. Physical Cleaning Of The Covered Devices. 3. Hardware Support A. In Case The Equipment Is Found Faulty And The Same Needs To Be Pulled Out By The Service Provider To Raise A Return Material Authorization (rma) Ticket To The Hardware Manufacturer, A Service Replacement Unit Of The Same Or An Alternative Specification As That Of The Malfunctioning Equipment Shall Be Provided While The Faulty Equipment Is Undergoing Rma. The Service Provider Shall Shoulder All The Costs Related To The Shipment Of The Equipment Subject To Rma. B.. The Service Provider Guarantees That It Will Be Returned And Re-installed Fit-for-use To Ipophl Within Six (6) Weeks, Starting From The Date The Said Equipment Was Pulled Out. Should The Service Provider Fail To Return Or Re-install The Equipment Within The Said Period, The Service Unit Provided By The Service Provider Shall Become The Property Of The Ipophl And The Pulled-out Defective Equipment The Property Of The Service Provider, Provided That The Service Unit Shall Have All The Warranties Of A Brand New Unit. 4. Problem Reporting A. Provision Of Phone Support 24x7 Mondays Through Sundays, Including Holidays, With A 30-minute Response Time Upon Receipt Of The Call By The Service Provider Helpdesk. B. Provision Of On-site Support Within 2-4 Hours Response Time. Vi. Contract Period The Contract Term Is One Year From Receipt Of The Notice To Proceed. Vii. Payment Terms Quarterly Payment Shall Be Made Upon Completion And Submission Of A Report Duly Signed And Certified By The Mis Director After The Scheduled Quarterly Preventive Maintenance. See Tor For “annex A”