Software Tenders

Details: Description Invitation To Bid For The Supply And Delivery Of Braille Equipment And Devices (second Posting) 1. The National Library Of The Philippines (nlp), Through The Fy 2024 General Appropriations Act Intends To Apply The Sum Of Two Million Seven Hundred Eighty Seven Thousand Pesos (php2,787,000.00) Being The Abc To Payments Under The Contract For Pb24-26 Supply And Delivery Of Braille Equipment And Devices (second Posting). Bidding Will Be Through Lot Bidding (2 Lots). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot No. Project Description Abc Cost Of Bidding Docs Bid Opening Venue Supply And Delivery Of Braille Equipment And Devices (second Posting) December 10 , 2024 ; 1:31 Pm 6th Floor Function Rm, Nlp Bldg, T.m. Kalaw St. Ermita, Manila Lot 1 Braille Equipment Php2,567,000.00 Php5,000.00 Lot 2 Braille Devices Php220,000.00 Php500.00 2. The National Library Of The Philippines (nlp), Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within (90-120) Calendar Days Upon Receipt Of Purchase Order. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A.bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4.prospective Bidders May Obtain Further Information From Nlp Bids And Awards Committee (bac) Secretariat Email Address And Inspect The Bidding Documents Posted At The Philippine Government Electronic Procurement System (philgeps) Or In Our Official Website Web.nlp.gov.ph. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 18, 2024 Through Email And Website(s) Below. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Electronic Means Or By Presenting The Official Receipt In Person. 6. The Nlp Will Hold A Pre-bid Conference On November 25, 2024 At 1:30 Pm Through Video Conferencing Via Zoom Which Shall Be Open To All Prospective Bidders. Send Interest To Bac@nlp.gov.ph With Subject: Request To Join The Pre-bid Conference Of Public Bidding No. 24-26. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Below On Or Before December 10, 2024 At 1:30 Pm. Usb Flash Drive Containing The Soft Copy Of The Technical (in Pdf) And Financial (in Word Or Excel) Requirements Must Be Included In The Original Copy Of The Technical Documents. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 10, 2024 At 1:31 Pm At The 6th Floor Function Room, Nlp Building. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Nlp Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Maureen M. Terrenal Marie Joy H. Bestoir Eleanor C. Siyang Jonathan F. Santos Bac Secretariat National Library Of The Philippines Tel. No.: (02) 5314-2100loc. 406 / 412 Email: Bac@nlp.gov.ph Website: Web.nlp.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Document: Web.nlp.gov.ph / Www.philgeps.gov.ph Sgd. Maricel M. Ureña Bac, Chairperson. Lot 1 : Braille Equipment 1.braille Embosser, 1 Pc Specification: • Entry Level : Reliable And Dependable Embosser For Light To Heavy Braille Production, • Embossing At 300 Cps (900 Pages Per Hour) Using Continuous/fanfold Braille Paper, It Offers Exceptional Dot Quality And Reliability • Braille Authority Dot Height Standards • Prints Both 6 And 8 Dot Braille • Interpoint / Single-side • Superior Braille Quality And Reliability • Easy To Set Up & Easy To Service • Wi-fi, Ethernet And Usb Connections • Works With Pc Operating Systems • Available As A Tabletop Embosser, On Casters For Easy Moving • Characters Per Line: 10-42 • Sheet Length : 4-14” / 10.16-35.56 Cm • Sheet Width: 5.5-13” / 13.97-33.02 Cm • Print Both 6 And 8 Dot Braille • Single / Interpoint • Warranty : 3 Years Including The After Sales Support • Training And Installation Or Options Of Inclusion Of Instructional; Videos, Telephone/online Support, And Email Assistance For Any Operational Clarifications, Along With Detailed Instructional Manual Provided With The Equipment 2 Tactile Graphics Machine, 1 Pc Specification: • Maximum Forming Area: One Inch Less Than Each Dimension Of Sheet • Frame & Sheet Sizes : 13-7/8 X 18- 5/8” • Electrical: Voltage: 115v Or 220v (+/- 10%), 50/60 Hz • Current: 115v: 15a Max 220v : 8a Max • Measurements: • Height: 16” • Width: 23” • Length: 28” With Oven Closed, 37” With Oven Open • Weight: 98-100 Pounds • Purchase Additional Frame: Optional 11 X 11.5” • Warranty : 3 Years Including The After Sales Support • Training And Installation Or Options Of Inclusion Of Instructional; Videos, Telephone/online Support, And Email Assistance For Any Operational Clarifications, Along With Detailed Instructional Manual Provided With The Equipment Lot 2 : Braille Devices 1.braille Display Device, 2 Pcs Specification: • 40 Cell Display With Cursur Routing Key • Interface: Bluetooth 4.2, Usb Type-c (ver.2.0) • Power Supply: Ac Adapter Input Ac 100v-240v, 50/60 Hz Output Dc5v Or Usb Power Supply • Weight: Approximately 520g • Compatible Os: Windows 7/ 8 / 8.1/ 10 /11 • External Dimension: (300mm (w) X 75mm (d) X 18.5mm (h) • Accessories Included: Usb Cable Type C And Ac Adapter • Operation: Continues Operation Once Plug In • Warranty:1 Year Warranty And Free Repair Services During The First Year Including The After Sales Support • Training And Installation Or Options Of Inclusion Of Instructional; Videos, Telephone/online Support, And Email Assistance For Any Operational Clarifications. Along With Detailed Instructional Manual Provided With The Equipment 2. Braille Labeler, 1 Pc Specification: • Interface: Usbx (ver2.1) , Bluetooth 5.0 (br/edr/le) • Power Supply: Ac Adapter Input Ac 100v-240v, 50/60hz Output • Power Supply Consumption: Max 18 (w): • Weight: 0.8g • Compatible Os: Windows 7/ 8/ /8.1 / 10, And Android 7 Up • External Dimension: 198mm (w) X 120mm (d) X 18.5 Mm (h) • Accessories Included: Dedicated Ac Adapter ; Dedicated Braille Tape : Attached Software Cd; Instruction Manual (ink/braille), Usb Cable • Special Braille Tape Specifications: Dedicated Braille Model Compatible With The Braille Labeler With 10m (1 Roll) Length • Warranty : 1 Year Warranty And Free Repair Services During The First Year Including The After Sales Support • Training And Installation Or Options Of Inclusion Of Instructional; Videos, Telephone/online Support, And Email Assistance For Any Operational Clarifications. Along With Detailed Instructional Manual Provided With The Equipment

Details: Description Item No. Item Description Qty. Unit Unit Price Total Price Improvement Of The Monitoring And Alert System Of The Operation Center 1 Lot 1 A. Fiber Optics Structured Cabling (1 Lot) Technical Specifications: "• (9,000 Meters) Fiber Optic Cable , 8 Core, G.657 Standard Compliant, Single Mode, With Figure 8‐dimension 250±15μm, Stranded Steel Wire Messenger, Colored Coating Fiber Brown，gray，white，red，black，1310nm≤0.4 (1550nm≤0.3) Db/km Attenuation,(1550nm≤18.0) Ps/nm.km Dispersion, Self‐supporting Cable Intended For Outdoor Aerial Installation " "• (5,000 Meters) 1 Core 3 Steel Wire Outdoor Ftth Fiber Optic Drop Wire Cable, Mode : Single‐mode Fiber : Single Core, Length : 500m / 1km, High Quality, Wavelength : 1310,1550 Nmapplication: Telecome Network, Catv Network, Ethernet Network, Optic Communication Equipment " "• (1 Unit) Optical Line Terminal With Up To 10gbps Uplink, Supports At Least 2 Pon Active Ports And 128 Optical Network Units, Redundant Power Supply, 19"" Rack‐mount, Onu Automatic Registration, Vlan, Traffic Shaping, 220vac " "• (30 Pieces) Optical Network With 4 Fast Ethernet Ports, Wifi Ap, Optical Network Port, Plug And Play, Automatic Detection, Vlan, And With Dhcp Server Relay Features " "• (2 Units) 16 Core Optical Fiber Distribution Box With Hoop 1:16 Plc Splitter Fiber Termination Box, Cassette Plc Splitter 1x2 1x4 1x8 1x16 Ftth Sc Upc 1*8 Fiber Optical Splitter Sc/upc Plc Splitter Cassette Box " "• (1 Unit) Fiber Patch Panel 12c Lc Adapter And Pigtail, 19"" 1u Fixed Type,with 20cm Depth, Fully Loaded " "• (1 Unit) Fiber Switch, 8 Ports, 1g, At Least 2 Sfp 10g (core Switch), 220vac " • (18 Sets) Fiber Optic Nap Closure "• (16 Units) Switch Poe, 4 Ports,100/1000, At Least 2 Sfp 1g, 220vac " • (8 Units) Optical Module, Tx1550nm/1.25g,rx1310nm/1.25g,lc, Single Mode And Single Fiber,20km,0～70℃,sfp "• (1 Lot) Fiber Patch Cord, Lc‐lc 1.5‐1.8m, Single Mode, Industrial Grade " • (1 Lot) Single Mode Media Converter Industrial Grade 2 B. Installation Of Equipments (1 Lot) Technical Specifications: "• (12 Units) 8 Channel Network Video Recorder, 2 Sata Hdd Maximum Storage, Real‐time Live Display Of Up To 8 Cctv Cameras Input , Motion Detection, Blind Video Loss, Interface For Ptz Camera Controller, Buzzer Alarm Trigger, Smart Hdd Management, Built‐in Web Server Management System, At Least 1 Ch Vga Out, 1ch Hdmi Out, 220vac " • (1 Unit) Network Video Recorder 32 Channel, H.265+/h.265/h.264+/h.264 Video Formats, Up To 32‐ch Ip Cameras Can Be Connected, Intelligent Analytics, Up To 24‐ch Perimeter Protection, Up To 16‐ch Facial Recognition For Video Stream, Or Up To 32‐ch. Facial Recognition For Face Picture, Up To 12‐ch Video Structuralization, Adopt Stream Over Tls Encryption Technology Which Provides More Secure Stream Transmission Service, Anr (automatic Network Replenishment) Technology Ensures Network Camera Video Torage Reliability, Up To 8 Sata Interfaces For Hdd Connection, Adopt Algorithm To Reduce False Alarm, Effectively Reduces The False Alarm Caused By Tree Branches, Leaves, Shadow, Light, Vehicles, Small Animals, Etc.extracting The Face Picture, Human Body And Vehicle Features From Live Videos, Which Is Used For The Tracking And Retrieval Of Human And Vehicles. "• (1 Unit) 4 Mp Anpr Network Camera, High Quality Imaging With 4 Mp Resolution, Clear Imaging Against Strong Back Light Due To 140 Wdr Technology, License Plate Recognition, Efficient H.265+ Compression Technology To Save Bandwidth And Storage, Water And Dust Resistant (ip66) And Vandal Proof (ik10), Road Traffic And Vehicle Detection, With Embedded Based License Plate Capture And Recognition Algorithms, The Camera Alone Can Achieve Plate Capture And Recognition. The Algorithm Enjoys The High Recognition Accuracy Of Common Plates And Complex‐structured Plates, Blocklist And Allowlist Are Available For Plate Categorization And Separate Alarm Triggering. Max. Resolution 2688 × 1520, Day & Night Ir Cut Filter Blue Glass Module To Reduce Ghost Phenomenon, Focal Length & Fov3.8 To 16 Mm, Horizontal Fov: 109.1° To 29.6°, Vertical Fov: 61.3° To 16.8°, Diagonal Fov: 125.1° To 33.9° 11 To 40 Mm, Horizontal Fov: 39.1° To 12.1°, Vertical Fov: 21.4° To 6.8°, Diagonal Fov: 45.8° To 13.9°, Network Storagenas (nfs, Smb/cifs), Auto Network Replenishment (anr) Together With High‐end Hikvision Memory Card, Memory Card Encryption And Health Detection Are Supported. " "• (45 Units) 4 Mp 2.8mm Lens Fixed Bullet Network Camera, High Quality Imaging With 4 Mp Resolution, Excellent Low‐light Performance, Efficient H.265+ Compression Technology, Water And Dust Resistant (ip67), 24/7 Colorful Imaging Day And Night " • (2 Units) 50 Inches Led Profesional Branded Smart Tv • (16 Units) Surveillance 6 Tb Hard Disk Drive "• (1 Set) Desktop Computer, At Least 12 Cores, 20 Threads, 25mb Smart Chache, 12mb L2 Total Cache, 2.10ghz Base Frequency, (2 Pcs.) 8gb Ddr4 3200 Ram, 1tb Hdd 7200rpm Sata 6gb/s 256mb Cache, With Compatible Motherboard, With Compatible Video Card, 19"" Led Monitor Hdmi With Hdmi Cable, 700watts True Rated Power Supply And Avr, With Matx Chassis And Licensed Windows Operating System " "• (16 Pcs) Pole, 15ft. Gi Standard Steel, 3""diameter Size, With Base Plate And Painted " 3 C. Labor Cost (1 Lot) Technical Specifications: Scope Of Work: *restoration Of Old Cameras *complete Installation And Configuration Of Cameras, Nvrs, Monitors And Other Equipments *wiring Layouting And Installation *conduit Layouting And Installation *terminations, Tracing And Loop Checking And Fiber Optics Splicing And Testing *installation And Configuration Of Computer Software For Cctv Management (lifetime License) *cctv Programming, Testing, Commissioning *training Of Users And Documentation For Final Turn Over The Following Does Not Include In The Scope Of Work: *electrical Wiring Of Main Power Supply Circuitry *scaffoldings, Lifters And The Likes.. *major Masonry And Inground/earth Excavation Works D. Warranty 1. Two(2) Years Warranty. 2. Lifetime Service Free Of Charge On Cctv Cameras And Nvrs. What Is Not Covered On Lifetime Free Services: *2a. Free Service Only Covers Wear And Tear Or Failure Of The Equipments Arising Under Normal Usage And Proper Maintenance. They Do Not Cover Any Malfunction, Failure Or Defect Resulting From Misuse, Abuse, Neglect, Alteration, Modification Or Repair By Anyone Other Than An Authorized Service Personnel. *2b. Any Damage Or Malfunction Inflicted By The User Or Other External Sources, Or Any Failure To Comply With The Warnings And Instructions In The Operation's Manual Is Not Covered *2c. End Of Life And End Of Support From The Manufacturer Total Brand And Model: Delivery Period: Warranty: Price Validity: After Having Read And Accepted Your General Conditions, I/we Quote Your On The Item At Price Noted Above. Printed Name / Signature Tel. No./ Cellphone No./e-mail Address Date: __________________________________

Details: Description 1 Lot Supply And Delivery Of Various Office Equipment For Use Of Lto-ro8. "airconditioning Unit (22 Units) *key Features: -1.5 Hp, Inverter Window Type -r410a Refrigerant -high Eer With Its Inverter Technology -sleek, Modern, And Aesthetic -with Remote Control -energy Savings Plug -24-hour Timer -econo And Sleep Mode -8-in-1 Filter Technology *technical Specifications: -cooling Capacity: 5,200-14,000 Kj/hr -power Consumption: 465-1,280 Watts -eer: 11.2-10.9 Kj/w-hr -warranty: A.) 1-year On Parts & Service B.) 5 Years On Compressor ***note: For All Waiting Areas Of District And Extension Offices" "airconditioning Unit (22 Units) *key Features: -1.5 Hp, Inverter Split-type *energy Efficiency: ->6 Cspf 5-star Rating -dc Indoor Fan With 1-100% Grades -dc Outdoor Fan With 9 Grades -eco-gear Operation At 50%, 75% & 100% -intelligent Eye Sensor -sleep Mode -eco Mode *technical Specifications: -power Supply: (v-ph-hz) 230v, 1ph, 60hz -cooling Capacity: (kj/hr) 12,700 (2,110-14,000) -power Input: (w) 865 (130-1,150) -cspf: 6.4 -refrigerant: R32 -sound Level: (h/m/l) 37.5/32.5/29/0 -warranty: A.) 1-year On Parts & Service B.) 5 Years On Compressor ***note: For All Waiting Areas Of District And Extension Offices" "automatic Voltage Regulator (40 Pieces) - Solid State Electronic Device - Voltage: 220v Avr - Watts: 1000 Watts - Max Capacity: 50va - Fuse: 5a - Socket: 3 X 220v -designed To Control Instant Peak Voltage From Reaching Your Sensitive Computers -short Circuit And Overload Protection ***note: For All Computers (working Stations)" "barcode/qr Code Scanner (1 Piece) -can Scan 1d/2d/qr Codes, With A Scanning Speed Of Up To 230 Scans Per Second, Portable And Wired, Compatible With Windows. ***note: For Regional Supply And Property Section" "biometrics, With Face Recognition (5 Units) * Key Features: -fingerprint Capacity: 3000 -card Capacity: Optional / 1000 Card -password Capacity: 1000 -communication: Lan, Usb (adms Ready) -display: 2.8 Tft Color Lcd -logs Capacity: 80,000 -power: Dc 12v -free Software: Ssr Self Srvice Report -warranty: 1year Warranty ***note: For Maasin, Laoang, Javier District Offices And Buffer Stock" "conference Microphone System (1 Set) - Frequency Range: Uhf640~690mhz - Adjustable Channel Number: 100×8 - Oscillation Mode: Phase-locked Loop Frequency Synthesis (pll) - Frequency Stability: ±10ppm - Receiving Mode: Superheterodyne Double Conversion - Receiving Sensitivity: -90dbm - Audio Frequency Response: 40~18000hz - Harmonic Distortion: ≤0.5% - Signal To Noise Ratio: ≥100db - Audio Output: Balanced Output And Unbalanced Output - Transmitting Power: 10~30mw - Modulation Method: Modulation Frequency - Battery Specifications: 2 1.5v No. 5 Batteries Includes - 12 Pcs Handheld Wireless Gooseneck Uhf Microphones - 1 Pc Receiver System - 1 Pc Aluminum Carrying Case ***note: For Conference Room" "desktop Computers (20 Sets) *key Features: -slim, Compact 24″ All-in-one Desktop Pc -high-tech Features With Optional Wireless Charging -smart Video-conferencing Features &amazing Audio *technical Specifications: -processor : 13th Generation Intel® Core™ I5-13420h Processor (e-cores Up To 3.40 Ghz P-cores Up To 4.60 Ghz) -operating System : Windows 11 Home 64 -graphic Card : Integrated Graphics -memory : 8 Gb Ddr5-5200mhz (sodimm) -storage : 256 Gb Ssd M.2 2280 Pcie Gen4 Tlc Opal -display : 23.8"" Fhd (1920 X 1080), Ips, Anti-glare, Non-touch, 99%srgb, 250 Nits, 100hz, Narrow Bezel -warranty : 1 Year ***note: For Working Stations" "electric Ceiling Fan (22 Units) -industrial Metal Orbit Ceiling Fan With 4-speed Remote Switch -18"" Banana-sized Metal Blade -1 Year Warranty - With High Performance Motor And Thermal Fuse Protection ***note: For All Waiting Areas Of District And Extension Offices" "electric Industrial Stand Fan (22 Units) -16″ Banana-sized Metal Blade - With 3-speed Rotary Switch, Tilting Head Adjustment With Oscillation -round And Stable Plastic Base -high-performance Motor And With Thermal Fuse Protection ***note: For All Waiting Areas Of District And Extension Offices" "electric Wall Fan (22 Units) - Wall Mounted -16"" Banana-sized Metal Blade And 40"" Fan Diameter -with 3-speed Rotary Swith With Oscillation -round And With Stable Plastic Frame -high-performance Motor And With Thermal Fuse Protection ***note: For All Waiting Areas Of District And Extension Offices" "laptop Computers (2 Units) *key Features: -14″ Lightweight Amd-powered Smb Laptop -advanced Thermal Design For Seamless Performance -ideal For Mobile Professionals With Demanding Workloads *technical Specifications: -processor : Amd Ryzen™ 5 7535hs Processor (3.30 Ghz Up To 4.55 Ghz) -operating System : Windows 11 Home Single Language 64 -graphic Card : Integrated Graphics -memory : 8 Gb Ddr5-4800mhz (sodimm) -storage : 256 Gb Ssd M.2 2242 Pcie Gen4 Tlc -display : 14"" Wuxga (1920 X 1200), Ips, Anti-glare, Non-touch, 45%ntsc, 300 Nits, 60hz -warranty : 1 Year ***note: For The Offices Of The Chief Of Administrative Division And Chief Of Human Resource Management Section" "multifunction A3 Printer (1 Unit) -monochrome Multi-function Printer -with 16 Prints Per Minute And 600x600 Dpi Print Resolution -standard Paper Input Capacity Of 350 Sheets, Usb Pc Connectivity And Direct Printing Capability. ***note: For Regional Project Engineer" "multifunction Printer (10 Units) -up To A4 To Legal Size, Monochrome -with Print Speed Up To 17 Ipm (black), Auto 2-sided Printing - Up To 20 Sheets Adf - Compatible With Mobile Connect App, Wifi, And Usb 2.0 - 3.0 Support. ***note: For Working Stations And Buffer Stock" "multifunction Printer (5 Units) - Up To A4 To Legal Size, With Colour Feature -with Print Speed Up To 17 Ipm (black), Auto 2-sided Printing -up To 20 Sheets Adf -compatible With Mobile Connect App, Wifi, And Usb 2.0 - 3.0 Support. ***note: For Working Stations And Buffer Stock" "multimedia Projector (1 Unit) - High Resolution, Quality Bigger Projections -with 3,800 Lumens Of Color And White Brightness -native Xga Resolution And 4:3 Performance, Long Lamp Life Up To 12,000 Hours In Eco Mode -with Built-in Moderator Function For Easy Sharing, And Advance Network Connectivity. ***note: For Conference Room" "public Address/paging System (22 Units) - For District And Extension Offices Including The Regional Office \ - Complete With 2-vocal Mics, Amplifier, Loudspeaker, Usb, Sd Card, And Bluetooth Inputs. ***note: For All District And Extension Offices" "uninterruptible Power Supply (30 Units) -line Interactive Topology, Sealed Maintenance, Free Batteries -with Surge Protection And Automatic Voltage Regulator (avr) -1000va, Brand New ***note: For Working Stations And Buffer Stock" "uninterruptible Power Supply (22 Units) -line Interactive Topology, Sealed Maintenance, Free Batteries, -with Surge Protection And Automatic Voltage Regulator (avr) -1500va, Brand New ***note: For All Sites With Laser Engravers" ***note: Please Check The Attached Pdb & Abc ***nothing Follows***

Details: Description Procurement Of Various Information And Communications Technology (ict) Equipment For Mimaropa Regional And Provincial Offices 4 Channel Audio Mixer With Bluetooth Pc 6 Bluetooth Player Digital Display Mp3 (u-disk Mp3 Input)mp3 Rec+45 V Phantom Powerbuilt-in 99 Dsp Effectssingle Group Main Controlfive Band Effects Level Monitordual 12 Band Level Monitor Main Outputrecord And Monitor Output With Bluetooth Play, With Digital Display Mp3(u-disk Mp3 Input Mp3 With Rec) +48 Phantom Power, Dual 7 Band Eq, Each Channel With Mute Switch, Bulit In 32-bit Dsp Effects, Single Group Main Output Control With Reduce Noice Function For Karaoke Five Band Effect Level Monitor Dual Twelve Band Level Display Main Output Record Earphones Monitor Output 3 Band Eq Each Channel Speaker With Wireless Microphone Set 5 Ac220v Or Dc12v (with Built-in Rechargeable Batteries) With 2 Wireless Microphone With 2 Mic Input (1 Xlr, 1 Pl55) With Fm Radio, Bluetooth, Guitar Input (shared With Mic 2 Input), Usb & Sd Port With 5 Band Equalizer And Lcd Display With Aux / Line In And Line Out With Remote Control, Handle And Wheels Cabinet Size: 478x393x718mm (lwh) 3 Axis Gimbal Stabilizer Pc 6 General: "dimensions: Unfolded: 276×111.5×99 Mm (l×w×h) Folded: 189×84.5×44 Mm (l×w×h)" "weight: Gimbal: Approx. 305 G Magnetic Phone Clamp: Approx. 25 G" Compatible Phone Weight: 170-290 G Compatible Phone Thickness: 6.9-10 Mm Compatible Phone Width: 67-84 Mm Battery: Type: Li-po 2s Capacity: 1000 Mah Energy: 7.74 Wh Charging Temperature: 5° To 40° C (41° To 104° F) Operating Temperature: 0° To 40° C (32° To 104° F) Operating Time: Approx. 6 Hours And 24 Minutes (measured Under Ideal Conditions With The Gimbal Fully Balanced) Charging Time: Approx. 1 Hour 24 Minutes (measured With A 10w Type-c Charger) Gimbal Charging Port: Usb-c Gimbal: Mechanical Range: Pan: -161.64° To 173.79° Roll: -120.30° To 211.97° Tilt: -101.64° To 78.55° Max Control Speed: 120°/s Wireless Mode Model: Bluetooth 5.1 Software App: Dji Mimo Grip Tripod Dimensions : Length: 138 Mm Diameter: 32 Mm Weight: Approx. 72 G 24-ports Gigabit Unmanaged Switch Pc 5 Number Of Ports: 24 Gigabit Speed: 10/100/1000 Mbps Plug And Play Design Wireless Pointer Pc 12 Dimensions Presentation Remote Height: 115.5 Mm Width: 37.8 Mm Depth: 27.4 Mm Weight: 57 G Receiver Height: 58.6 Mm Width: 16.5 Mm Depth: 7.9 Mm Weight: 6 G Technical Specifications Laser Class: 2 Laser Max Output: Less Than 1m W Wave Length: 640～660nm (red Light) Battery Battery Type: 2 Aaa Batteries Battery Life (laser Pointer): 20-hour Maximum Battery Life (presenter): 1050-hour Maximum Connectivity Wireless Technology: 2.4 Ghz Wireless Technology Operating Distance: Approx 10 M 4-port 4k Hdmi Splitter Pc 10 Connects One Hdmi Source To Four Hdmi Displays At The Same Time Hdmi (3d, Deep Color, 4kx2k); Hdcp 1.4 Compliant Long Distance Transmission – Up To 15 M (24 Awg) Supports Max. Data Rate Of 10.2 Gbps Hdmi (male To Male) Cable- 10 Meters Pc 12 Connector Plating : Gold Cable Jacket Material: Pvc - Polyvinyl Chloride Cable Shield Material: Aluminum-mylar Foil With Braid Wire Gauge: 24 A Length: 10,0 M [32,8 Ft] Nano - Wifi Usb 2.0 Adapter Pc 70 Wireless Features Wireless Frequency:2.4 + 5 Ghz (dual Band) Wifi Standards:802.11ax, 802.11ac, 802.11n, 802.11a, 802.11b/g Transmission Speed - 5ghz [mb/s]:1201 Transmission Speed - 2.4ghz [mb/s]:574 Security:wpa, Wpa2, Wpa3 2.4ghz Mimo:2 X 2 5ghz Mimo:2 X 2 Type Of Antenna:built-in Connectors And Interfaces Interface:usb 2.0 Physical Characteristics Operating Temperature [°c]:0 Up To 40 Width [mm]:27 Height [mm]:8 Depth [mm]:16 General Type Of Network Card:wlan Ergonomic Mouse Pad Pc 50 Product: Mouse Pad With Wrist Support (lycra Cloth) Material: High Quality Eva Dimensions: 230mm X 180mm X 5mm (wrist Support = 20mm) Lightweight And Portable Usb External Sound Adapter Pc 7 Usb 2.0 External Sound Adapter Adapter Includes A Stereo Headphone Output Jack And A Mono Microphone Input Jack Plug And Play "cable Lenth: 15cm Aux (trs)interface" Cat6 Rj45 Passthrough Box 1 Made Of High-quality Materials, Durable Full-color Gold-plated Chip, Effectively Enhance Signal Transmission Good Oxidation Resistance Perforated Crystal Head, Fast Threading, Effectively Avoiding The Core Not Being Inserted In The End High Strength Shrapnel, Good Flexibility Wire Hole: 1.0mm Compatible: Cat5e / Cat6 Crystal Head X200 Lan Cable (utp Cable Cat 6) - Indoor Box 6 Length: 1000ft/305m Number Of Pairs: 4 Total Number Of Conductors: 8 Awg: 24 Stranding: Solid Conductor Material: Bc - Bare Copper Insulation Material: Po - Polyolefin Outer Shield Material: Unshielded Outer Jacket Material: Pvc - Polyvinyl Chloride Plenum (y/n): N Outer Jacket Ripcord - Yes Ul Cm Rated Supporting Frequencies Of Up To 250 Mhz And The 10base-t, 100base-tx, 1000base-t, And 10gbase-t Rj45 Cable Extender Connector (female To Female) Pc 40 Connector Type: Rj45 Sku: 35mm*20mm*20mm Webcam Pc 35 Resolution: Fhd 1080p 1920*1080 Frame Rate: 30fps Built-in Mic: Single Digital Mic Lens Type: Full Hd Glass Lens Focus Type: Fixed Focus* Output Format: Mjpeg Yuy2 Usb Transfer: Usb 2.0 High-speed Viewing Angle: 70 Degrees System Requirements: Windows 7/ 8/ 8.1/ 10 Or Above Wireless Lavalier Microphone With Noise Cancellation Mini Mic Set 19 Wiireless Microphone System With Dual 2.4g Channels With The Usb-c, Lightning, And 3.5mm Trs Connectors Available In 48khz Hd Audio When Noise Cancellation Enabled Wide-range 20-20,000hz Frequency Response With Built-in Rechargeable Lithium-ion Battery Mono/ Stereo Output Switchable 3.5mm Trs Analog Output, Usb-c And Ios Lightning Digital Output -universal Compatibility With Cameras, Smartphones And Computers 2×tx 1xrx 1× 3.5mm Trs Connector 1× Usb-c Connector 1× Ios Lightning Connector 1× 3-in-1 Charging Cable 2× Fur Windshield Please See Attached Sheets For The Photos Of Each Item. **nothing Follows** Expected Date Of Delivery: December 18, 2024 Note: Quotations Should Include Shipping Cost To Psa Regional, Calapan City **nothing Follows**

Details: Description Invitation To Bid For 1. Contract Id No. : 24gme0182 Contract Name : Supply & Delivery Of Laboratory Equipment For Use Of Quality Assurance Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 1. The Dpwh Sarangani District Engineering Office, Through The Government Of The Philippines Fy2024 Intends To Apply The Sum Of: 1. P 2,760,532.45 Being The Abc’s To Payments Under The Contract For: 1. 24gme0182 – Supply & Delivery Of Laboratory Equipment For Use Of Quality Assurance Section, Dpwh-sarangani District Engineering Office, Sarangani Province Qty/unit Description: 1 Unit Compression Machine 2000 Kn Cap Conforming To Aashto T 022-92, A Compression Type Apparatus Capable Of Applying A Load At A Rate Of Movement (platen To Crosshead Measurement) Corresponding To A Loading Rate On The Specimen Within The Range Of 20 To 50 Psi/s (0.14 T 0.34 Mpa/s). The Designated Rate Of Movement Shall Be Maintained At Least During The Latter Half Of The Anticipated Loading Phase Of The Testing Cycle. The Within Test Coefficient Of Variation Represents The Expected Variation Of Measured Strength Of Companion Cylinders Prepared From The Same Sample Of Concrete And Tested By One Laboratory At The Same Age. The Values Given For The Within-test Coefficient Of Variation Of 150 To 300 Mm [6 X 12 In.] Cylinders Are Applicable For Compressive Strengths Between 2000 And 15 To 55 Mpa [8000 Psi] And Those For 100 By 200 Mm. [4 X 8 In.] Cylinders Are Applicable For Compressive Strengths Between 17 To 32 Mpa [2500 To 4700 Psi]. Conforming To Aashto T 097-86. Apparatus For Flexural Test Of Concrete Should Be Capable Of Maintaining The Specified Span Length And Distances Between Load-applying Blocks And Support Blo Main Features: - Capacity: 2000kn - Max Vertical Daylight: 370mm - Horizontal Daylight: 350mm - Max. Piston Travel: 50mm - Platen Dimensions: 220mm Dia. - Platen Surface Hardness: 55.5 Hrc - Platens Flatness Toll: 0.03mm - Overall Dimensions: 835mm X 440mm X 1090mm - Weight: Approx. 525kg Accessories: - Flexure Frame Complete With Rollers 150 Kn Cap - Two Way Valve For 2nd Frame - Masonry Attachment For Hollow Blocks - Platen (spacer) Tool Steel 165 Mm(d) X 40 Mm (h) - Capping Retainer 6"dia (pair) - Neoprene Pads 6-1/16" X 1/2"shore 70 1 Set Moisture Meter Standard Speedy 0-20%range, 6 Gram Sample 1 Unit Digital Rebound Test Hammer Testing Standard: Should Be Compliant With Astm C805 (standard Test Method For Rebound Number Of Hardened Concrete); High Precision Compressive Strength Estimation And Strength Uniformity Assessment; Battery: Rechargeable; Spring Extension: At Least 75 Mm; Impact Energy: 2.207 Nm (n), 0.735 Nm (l); Measuring Range: 10 Mpa To 100 Mpa Or Better; Operating Temperature: 0 To 50 Deg. Celsius Or Better; Storage Temperature: -10 To 70 Deg. Celsius Or Better; Testing Anvil: Used For Calibration Of Concrete Rebound Hammer; 9. Other Requirements: With A Digital Display, Units In Mpa, Should Include Software, Carrying Strap, Battery Charger With A Usb Cable, Grinding Stone, Documentation, And Carrying Bag; With Good Memory Capacity; With Calibration Certificate From The Manufacturer/supplier, If Available. Include Other General Requirements Found At The End Of This Document; Additional Note: The Inclusion Of An Android/ios Device In The Procurement May Be Obtainable, When Necessary, For The Use Of Specific Types Of Rebound Hammer And Testing Anvil 1 Pc Le Chatelier Flask Graduated Flask 250 Ml Cap. W/ Graduated Neck Fr 0 To 1ml & Fr 18-24ml In 0.1ml Grad. W/ Accuracy Of 0.05ml 1 Pc Pycnometer 1000ml Cap. Glass Jar Supplied With Conical Screw Cap Non-corrodible Cone & Rubber Seal 2 Pcs Sieve #12 Conforms To The Requirements Of Astm E11 1 Pack Filter Paper 25mm Dia. Pack Of 100 1 Pc Reagent Bottle Clear 1000ml Cap. With Screw Cap 3 Pcs Rubber Mallet (wooden Handle) 24 Oz 10 Bottle Chemical Calcium Carbide Absorbent Reagent/1lbs Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Sarangani District Engineering Office Now Invites Bids For The Above Procurement Project. Delivery Of Goods Required Is Twenty-five (25) Calendar Days For Item 1. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Dpwh Sarangani District Engineering Office, Sarangani Province And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm (office Hour). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 28 – December 17, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Project No. 1 Php 5,000.00 May Be Refunded In Accordance With The Guidelines Based On The Grounds Provided Under Section 41 Of The Republic Act 9184 And Its Implementing Rules And Regulations. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Electronically In The Email Address Given Below Or In Person. 6. The Dpwh Sarangani District Engineering Office Will Hold A Pre-bid Conference On December 05, 2024, 10:00am At Dpwh – Sarangani District Engineering Office Conference Room, Kawas, Alabel, Sarangani Province And/or Through Video Conference Or Webcasting Via: Zoom Meeting Id: 937 563 6853 Password: Sgni22 Youtube Channel: Https://www.youtube.com/@sarangani Deo/streams 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 17, 2024 @ 10:00 A.m. Late Bids Shall Not Be Accepted. 8. Bid Opening Shall Be On December 17, 2024 At Dpwh-sarangani Deo Conference Room And/or Through Video Conferencing Or Webcasting Via: Zoom Meeting Id: 937 563 6853 Password: Sgni22 Youtube Channel: Https://www.youtube.com/@sarangani Deo/streams 9. Bid Opening Shall Be On December 17, 2024, Immediately After The Deadline Of Submission Of Bids At Dpwh-sarangani Deo Conference Room And/or Via Zoom And Youtube Livestream Using The Details Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Dpwh Sarangani District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Reuben G. Salazar Acting Head, Procurement Unit, Dpwh – Sarangani Deo 9501, Kawas, Alabel, Sarangani Province Salazar.reuben@dpwh.gov.ph Contact Nos.: 083-892-5877 0905-553-0924 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph Www.philgeps.gov.ph Edward D. Carillo Engineer Iii, Chief Construction Section Bac Chairperson Date Of Publication: November 28 – December 04, 2024

Description: Sources Sought Special Notice 2024 nasa Ames Research Center (arc) Is Seeking Partners Interested In Developing Competitive Proposals In Response To Nasa Announcements Of Opportunity (aos), Broad Agency Announcements (baas), Missions Of Opportunities (moos) And Proposal Calls From Other Government Agencies. Arc Is Interested In Identifying Potential Partners That Can Perform Science Investigations, Conduct Research Activities, And Develop And Demonstrate New Technologies That Are Aligned With Nasa’s Goals. Information Is Also Sought Regarding Partners That, In Addition To Performing Substantial Research, Can Provide Flight Hardware (i.e., Spacecraft, Deployment Systems, Suborbital Systems, Ground Support Systems, Equipment, Or Instrumentation) Necessary To Implement Proposed Science Investigations, Research Activities Or Technology Demonstration Missions. nasa Often Competitively Selects Scientific Investigations, Technology Development And Demonstration Missions Through Solicitations Or Announcements Posted On Nspires Http://nspires.nasaprs.com/external. These Missions Are Typically Led By A Single Principal Investigator (pi), Principal Technologist (pt), Or Project Manager (pm). The Pi, Pt, Or Pm May Be From Government Or Non-government Institutions, Including Academic Institutions, Industry Or Nonprofit Entities, One Of Nasa’s Nine Field Centers, Nasa’s Jet Propulsion Laboratory (jpl), Other Federally Funded Research And Development Centers, Or Other U.s. Government Agencies. Mission Teams May Be Formed From Any Combination Of These Institutions Including International Partners. Arc May Respond To An Ao Or Other Proposal Calls In Either A Lead Or Supporting Role. arc Has A History Of Responding To A Wide Variety Of Nasa Aos Including: Planetary Exploration Aos From The Nasa New Frontiers Program (https://www.nasa.gov/planetarymissions/newfrontiers.html), The Nasa Discovery Program (https://science.nasa.gov/solar-system/programs/discovery), And The Nasa Simplex Program (https://soma.larc.nasa.gov/simplex/); Various Aos From The Nasa Explorers Program (https://explorers.gsfc.nasa.gov) Including Midex, Smex, And Missions Of Opportunity (moo); And Research Opportunities In Space And Earth Sciences (roses) Aos. Arc Anticipates Responding To Current And Future Aos In These And Other Areas As Well. a Full Description Of Current, Future, And Past Calls For Proposals From Smd, Stmd, Esdmd, Somd, And Armd At Nasa Headquarters Can Be Found At Http://nspires.nasaprs.com/external. Additional Information Is Available At Http://science.nasa.gov/researchers. this Synopsis/special Notice Is Posted Annually In Anticipation Of Upcoming Aos And May Have Subsequent Specific Updates As Arc Seeks Partners For Specific Proposal Opportunities. Arc Is Currently Considering Responding To Aos From Nasa's Science Mission Directorate (smd), Space Technology Mission Directorate (stmd), Space Operations Mission Directorate (somd), And Exploration Systems Development Mission Directorate (esdmd). current Nspires Aos To Which Arc May Be Interested In Responding To Are Listed Below By Nasa Mission Directorate. Arc Is Interested In Responding To Future Nspires Aos And Aos From Other Sources, Such As Nsf, Nih, And Others Within The Next Several Years. responses From Prospective Partners Are Encouraged Even If A Particular Solicitation Is Not On The List Below. Arc Typically Begins Many Of Its Efforts In Response To Planned Or Anticipated Future Aos 18 To 36 Months In Advance Of The Release Of The Draft Ao. science Mission Directorate research Opportunities In Space And Earth Sciences 2024 (roses): solicitation: Nnh24zda001n note: There Are A Number Of Independent Solicitations Under This Announcement. Of Particular Interest To Ames Are Those Associated With: Earth Sciences, Heliophysics, Astrophysics (e.g., Astrophysics Pioneers), Space Biology, Instruments (e.g., Life Detection), Payloads And Research Investigations On The Surface Of The Moon (prism), Planetary Instrument Concepts For The Advancement Of Solar System Observations (picasso), And Maturation Of Instruments For Solar System Exploration (matisse). forthcoming Release Of The New Frontiers 5 (nf5) Announcement Of Opportunity: solicitation: Nnh23zda006j (https://newfrontiers.larc.nasa.gov/nf5/) forthcoming Release Of Calls From The Mars Exploration Program “exploring Mars Together: A Plan For A Sustainable Future For Science At Mars” solicitation: Tbd note: The Future Plan Communicates Potential Competed Processes For Low-cost, Medium-class, And Competed Payload Missions To Mars. (http://go.nasa.gov/3lwgfyq) responders To This Notice Are Encouraged To Submit Questions To The Identified Poc In Writing. Pertinent Information From Questions And Answers Will Be Shared With All Interested Parties Without Disclosing The Identity Of The Sources Of The Questions. Responses To This Notice May Be Submitted At Any Time. However, Arc Reserves The Right To Complete Its Evaluation Of Responses In A Time Frame Necessary To Support Timely Submission Of An Arc Proposal To A Particular Opportunity. Arc May Hold Optional Oral Presentations, Meetings Or Written Exchanges Via Email With Potential Proposal Partners To Obtain Additional Information. Oral Presentations Will Have A Specified Period Of Time To Present And For Questions And Answers. responses To This Notice Will Not Be Returned. All Responders To This Notice Should Be Aware That Nasa Support Service Contractors May Have Access To Their Responses To This Notice And Subsequent Proposal Information. All Information Received In Response To This Notice That Is Marked ‘proprietary' Will Be Handled And Protected Accordingly. Nasa Support Service Contractors Are Obligated To Protect Third-party Proprietary Information. By Submitting A Response To This Notice, The Responder Is Deemed To Have Consented To Release Of Proprietary Information To Such Nasa Support Service Contractors. this Synopsis Is For Information And Planning Purposes And Is Not To Be Construed As A Commitment By The Government, Nor Will The Government Pay For Information Solicited. Submitted Responses Will Be Maintained For Possible Future Opportunities For 3 Years After Receipt. of The Current And Upcoming Nasa Ao Calls Described Above, Responders To This Notice Should Identify Which Announcement(s) Are Appropriate For Their Capabilities. However, Responses May Be Considered For Partnering For Any Of The Opportunities Listed Above, Or Other Future Opportunities. Additional Information May Be Requested To Determine Potential Partnering Relationships. Responses To This Sources Sought Notice Should Include Brief Summaries Of The Following Information As Relevant (responses Only Need To Address The Elements They Wish To Partner On): 1. Spacecraft Systems Including Bus And/or Subsystems: 1) Describe Spacecraft, Bus, And/or Subsystem Mission Element Capabilities The Responder Has To Offer. 2) Identify Particularly Critical Or Challenging Areas That Have Been Overcome In Previous Work. 3) Identify Spacecraft, Bus, And/or Subsystem Relevance And Compliance To The Applicable Mission Class (class A, B, C, Or D) 4) Discuss Current Capabilities For Integration And Test (i&t) Flow Of The Spacecraft, Bus And/or Subsystem(s). 5) List The Skills Available To Support A Spacecraft Or Subsystem(s) Through All Mission Phases. 6) Identify Responder's Support Facilities For A Spacecraft And/or Subsystem(s) E.g., Fabrication, I&t, Storage, Etc. 7) Indicate The Resources (skills And Time) That Would Be Allocated To The Potential Proposal Development Phase. 2. Payload, Instrumentation Or Subsystems, Including Drill, Excavator/probe, And Sample Transfer Systems (one Or Multiple): 1) Address Payload, Instrumentation And/or Subsystem(s) Mission Element Capabilities The Responder Has To Offer. 2) Identify Particularly Critical Or Challenging Areas That Have Been Overcome In Previous Work. 3) Identify Payload, Instrumentation, And/or Subsystem Relevance And Compliance To The Applicable Mission Class (class A, B, C, Or D). 4) Discuss Current Capabilities For Integration And Test (i&t) Flow For The Payload(s), Instrumentation, Or Subsystem(s). 5) List The Skills Available To Support A Payload Through All Mission Phases. 6) Identify Responder's Support Facilities For Payload(s) E.g., Fabrication, I&t, Storage, Etc. 7) Indicate The Resources (skills And Time) That Would Be Allocated To The Potential Proposal Development Phase. 3. Payload Delivery Capability To Planetary Surfaces: 1) Describe The Planetary (moon, Mars, Etc.) Payload Delivery Capability For Entry, Descent, And Landing. 2) Describe The Payload Accommodation Aspects Of The Delivery Capability (e.g., Payload Mass, Volume, Power) And Any Relevant Performance Considerations, E.g., Dependence On Landing Altitude. 3) Indicate Any Special Aspects Of The Capability That Might Be Relevant To Nasa Missions. 4) Discuss Relevant Spacecraft Development And Operations Capabilities That The Proposer Has To Offer. 5) Discuss Current Capabilities For Integration And Testing Flow For The Spacecraft And Payload(s). 6) Identify Support Facilities (fabrication, I&t, Storage, Etc.) Available For Spacecraft And/or Payload(s). 7) List The Skills Available To Support The Delivery Capability Through All Mission Phases. 8) Indicate The Resources (skills And Time) That Would Be Allocated To A Potential Proposal Development Phase. 4. Scientific Concepts, Technology Demonstration Concepts Or Mission Architecture: 1) Provide A Research Topic Or Mission Concept Related To The Particular Solicitation Of Interest And Why The Topic Is Relevant To The Solicitation. 2) Provide An Overview Of The Mission Concept. 3) Identify Existing Or Proposed Partners, Their Role, The Role Of The Responder's Organization, And The Role Of Nasa Ames In The Proposed Mission. 4) Identify The Rough Order Of Magnitude (rom) Cost For The Mission Concept. 5) Address Mission Element Capabilities The Responder Has To Offer. 6) Indicate The Resources (skills And Time) That Would Be Allocated To The Potential Proposal Development Phase. 5. Integration With Launch Services: 1) Address Secondary Launch System Capabilities And Launch Dispensing Systems For The Spacecraft Systems The Responder Has To Offer. 2) Identify Particularly Critical Or Challenging Areas That Have Been Overcome In Previous Work. 3) Discuss Current Capabilities For Integration And Test (i&t). 4) Identify The Rough Order Of Magnitude (rom) Cost. 5) Identify Responder's Support Facilities For The Launch And Dispenser Integration. 6) Indicate The Resources (skills And Time) That Would Be Allocated To The Potential Proposal Development Phase. for The Purposes Of Determining Potential Partnership Opportunities, Arc Will Evaluate The Responses Received Based On Alignment With The Agency's Goals, Compliance With The Announcement Requirements, Feasibility And Suitability Of The Concept, And/or And Its Alignment And/or Complementary Nature With Ames' Interests And Capabilities. The Criteria For Consideration Are Listed Below: ability To Work As Part Of A Government-industry Team That May Include Other Industrial Partners, Academia, And/or International Partners. innovative Technical And Partnering Approaches That Could Be Used To Minimize Cost And/or Schedules Without Increasing Overall Mission Risk. history Of Delivering Spacecraft, Payloads, Or Instruments With Proven Technical And Cost Performance. Also, If Applicable, Depth Of Experience In Spacecraft Bus And/or Payload Management/development, Including But Not Limited To: Systems Engineering, Bus And/or Payload Fabrication And Test, Subcontract Management, Quality Management, Safety Management, Materials And Processes/contamination Control, Payload Integration And Test Support, Observatory Functional And Environmental Testing, Shipment To The Launch Site, Launch Vehicle Integration Support, Preparations For And The Conduct Of Launch And Early Orbit Checkout Operations, On-orbit Operation Support, And Sustaining Engineering Support Including Flight Software Maintenance. prior To Final Selection As A Partner, Respondents May Be Required To Provide Documentation Of Demonstrated Cost, Schedule And Technical Performance. in Order To Receive Consideration Respondents Must Submit A Brief Response That Includes The Information Requested In This Notice, Including Answers To The Relevant Questions Listed Above For Each Proposed Partnership. For Each Proposed Partnership The Response Should Specify The Type Of Partnership The Responder Is Interested Pursuing, Including Specific Opportunities If Known And Highlighting Work Performed. the Following Requirements For The Response Must Also Be Met: the Response Must Include: the Name, Physical Address, And Website Of The Company Or Organization a Company Point Of Contact (poc) Who Can Answer Questions From Nasa address, Email, And Phone Number Of The Company Poc the Response Must Not Exceed 10 Pages (arial Font Not Smaller Than 12-point) For Each Proposed Partnership. send Responses In Pdf Format By Email To Arc-sources-sought@mail.nasa.gov include The Synopsis Number And Company Name In Subject Line Of The Email Response. note: The Response Will Be Maintained For Three Years After Receipt. if Yours Is A Commercial Firm, Your Response Must Also Include: Size Of Business And Number Of Employees; Average Annual Revenue For Past 3 Years; Ownership - Large, Small, Small Disadvantaged, 8(a), Hubzone, And/or Woman-owned And Whether The Company Is U.s. Or Internationally-owned; Number Of Years In Business; And Affiliate Information: Parent Company (us Or International), And Joint Venture Potential Teaming Partners (prime Contractor If Potential Sub, Or Subcontractors If Potential Prime). this Notice Should Not Be Construed As A Solicitation; Therefore, Please Do Not Request A Copy Of A Solicitation. It Is The Responder's Responsibility To Monitor Fedbizopps For Any Changes To This Notice. pointof Contact new Opportunities Center, Arc-sources-sought@mail.nasa.gov

Details: The subject of the Supplied is the General Teaching School. Delivery Product, Implementing Installation of Software and Interconnection, Including Testion will be Included in the Offer Ceně. A complete technical specification of supplied products is also included.

Details: Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 4 Lots Various Medical Equipment (batch 2) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Ninety-two Million Pesos Only (php92,000,000.00) Being The Abc To Payments Under The Contract For Cb-2024-11-0004. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Ninety-two Million Pesos Only (php92,000,000.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Treadmill With Electrocardiogram, Exercise / Stress Testing System + Cardiovascular Information System 1 35,000,000.00 35,000,000.00 2 Portable X-ray Machine 1 17,000,000.00 17,000,000.00 3 Ultrasound Machine 1 20,000,000.00 20,000,000.00 4 Flexible Endoscopy 1 20,000,000.00 20,000,000.00 Grand Total 92,000,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery And Installation Of The Goods Is Required Within 120 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On November 15- December 10, 2024 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Treadmill With Electrocardiogram, Exercise / Stress Testing System + Cardiovascular Information System 35,000,000.00 25,000.00 2 Portable X-ray Machine 17,000,000.00 25,000.00 3 Ultrasound Machine 20,000,000.00 25,000.00 4 Flexible Endoscopy 20,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 "for Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 27th Day Of November 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 10th Day Of December 2024 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 10th Day Of December 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. Submission Of Hardcopies: The Winning Bidders Shall Submit Their Original Eligibility And Technical Documents Described In Itb Clause 10 In One Sealed Envelope Marked "original - Technical Component", And The Original Of Their Financial Component In Another Sealed Envelope Marked "original Financial Component", Sealing Them All In An Outer Envelope Marked "original Bid". Each Copy Of The First And Second Envelopes Shall Have 2 Copies And Similarly Sealed Duly Marking The Inner Envelopes As "copy No. 1 Technical Component" And "copy No. 1- Financial Component” And "copy No. 2- Technical Component" And "copy No. 2- Financial Component" And The Outer Envelope As "copy No. 1" And "copy No. 2" Respectively. These Envelopes Containing The Original And The Copies Shall Then Be Enclosed In One Single Envelope. Please Take Note That All Notarized Documents Must Be Treated As Original Copies For All The Submitted Documents (original, Copy 1, And Copy 2). It Is Imperative That Each Copy Retains Its Original Notarization To Ensure Legal Validity And Compliance. The Original And The Number Of Copies Of The Bid As Indicated In The Itb Clause 15 Shall Be Typed Or Written In Ink And Shall Be Signed By The Bidder Or Its Duly Authorized Representative/s. All Envelopes Shall: A. Contain The Name Of The Contract To Be Bid In Capital Letters; B. Bear The Name And Address Of The Bidder In Capital Letters; C. Be Addressed To The Procuring Entity's Bac In Accordance With Itb Clause 1; D. Bear The Specific Identification Of This Bidding Process Indicated In The Itb Clause 1. 12. For Further Information, Please Refer To: Mary Grace L. Simbajon Jessa O. Quiñal Procurement Office Procurement Office Malayo Sur, Cortes, Bohol Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org Procurement@cpspecialtycenter.org +639209437250 +639452478632 November 14, 2024 Approved By, (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By, (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief I Head Of Procuring Entity --------------------------------------------------------------------------------------------------------- 1 1 Lot Supply, Delivery, Installation, Testing & Commissioning Of Treadmill With Electrocardiogram, Exercise / Stress Testing System + Cardiovascular Information System Treadmill With Electrocardiogram, Exercise / Stress Testing System Power Supply : Ac Operation; Input Voltage: 200 To 240 Volts Ac; Power Consumption: 350 Watts Max Display : At Least 22 Inch Diagonal Display Size; Resolution: At Least 1680 X 1050 Pixels; Tiltable Height Adjustable Flat Screen For Optimal Positioning Dedicated Workflow Keys Risk Stratification: Critical Algorithms, Including Heart Rate Recovery (hrr) And T-wave Alternans (twa) Functional Response: Metabolic Equivalents (mets) Level Indicated During Procedure Ischemia Detection: St/hr Hysteresis Analysis Which Improves Cad Detection Wireless Acquisition: Use Of Wireless Technology To Obtain Signals Or Data Capable Of Creating A Remote Workstation On Any Pc For Viewing Editing And Printing Stress Data Capable Of Adding Automated Blood Pressure And Oxygen Saturation Data Into The System System Is Capable Of Integrating With Stress Echocardiography, Nuclear Imaging, And Ambulatory Blood Pressure Analysis Open System Architecture Uses Industry Standard Communication Protocols Such As Dicom And Xml; Data Export Via Xml, Pdf And Xls To Match Emr Or His Files Automative Timeout And Log-in For Increased Security Advanced Security Protections Include Data Encryption, Username And Password Authentication, Secure Network Connections, Electronic Delivery Of Security Patches And Updates, Constant Threat Monitoring And Disaster Recovery Plan Weight: Patient Weight Capacity (kg): Up To 227; Treadmill Net Weight (kg): Up To 193 Power Requirements: 220/240 Vac, 1-phase, 50-60 Hertz, 20-amp Power Supply; Must Have Dedicated 15a Service Speed Range: 0.1 To 15.0 Miles Per Hour, 0.2 To 24.0 Kilometers Per Hour; Self-calibrating; Adjustable In 0.1 Mph Or 0.1 Kph Increments Incline Range: 0 To 25%, At Least 0.5% Incremental Movements; Self-calibrating Running Surface: At Least 56 By 160 Centimeters (cm); Running Belt Tracking System; Cushioned Running Deck Absorbs Shock Of Foot Falls; Self-lubricated And Reversible Running Deck; Step-up Low Profile Deck Height: At Least 18 Cm From Floor. Communication Ports: Rs232 Female Serial Port; Usb 1.0 “b” Port. Floor Surface Footprint: At Least 84 By 200 Cm Level Surface. Dual Comparative Speed Sensors Auto Runaway Shutdown Auto Communication Loss Shutdown Manual Twist Lock Emergency Stop Button Manual Stop Tether Braking System For Safe Patient Off-loading Fire Rated Motor Pan Hood Enclosure Cardiovascular Information System The System Shall Allow Cardiac Technologists To Enter Comments Which Will Not Be Reflected In The Report Or Distributed To Electronic Medical Record (emr). The Gui Should Allow Searching In Forms – Quick Search Of Specific Field Name, Label Or Value In Forms With Immediate Link Which Takes The User To The Field And Highlights It For Documentation. The Gui Should Allow Searching For Values Within Reports. The System Should Support Structured Reporting, With Quick Reports, Side By Side Reporting, And Real-time Synchronization Of The Report To Data Fields In The Form. Report Templates Must Be User-definable. The Reporting System Shall Be Able To Auto Populate Findings Where Relevant And The Cardiologist Must Be Able To Override Any Auto Populated Data. The System Should Support Comprehensive Reporting Functions For Structural Heart End-to-end Electrophysiology (ep) Workflow In Conjunction With Ep Recording System In The Market Pediatric Echo Reporting Incorporated With Boston Z-scores The System Should Support Ingestion And Non-editable Display Of Pdf Reports From 3rd Party Systems, Such As Hemodynamic Systems, Including Trackings/full Disclosure From Holter Monitoring Systems Or Ecg Management Systems The System Shall Be Able To Receive Studies Sent Directly From Modalities And Devices (without Drawing From Digital Imaging And Communications In Medicine (dicom) Modality Worklist). The System Shall Be Able To Automatically Create Patients From Received Studies, If The Patient Is Not Yet Available In The System Database. The System Shall Prevent Separate Cardiologists From Simultaneously Reporting On The Same Examination, And Alert The Users. The System Shall Have A Charge Verification And Communication Functionality To Hospital Billing It Systems. The System Should Support Result Distribution In A Variety Of Formats, Including Hl7, Pdf, And Sending Discrete Xml Values To External Systems Embedded Advanced Post-processing Tools For Cath And Us (2d, 3d And 4d) Via Dedicated Ultrasound Reporting System/picture Archive Communication System Embedded 3d Advanced Visualization With Advanced Processing Web-enabled Deployment Cardio Imaging Solution Integration 1280 X 1024 Resolution Particulars Workstation: (1) Unit Windows 10 64bit Or Newer Version X86 Microprocessor, Ram - At Least 32gb Ssd - At Least 512gb, Network - At Least 1gb With Peripheral Component Interconnect Express Slot For Medical Graphic Controller Worklist Monitor: (1) Unit Of At Least 27" Monitor Warranty : 5 Years And On The Graphic Controller, 20,000 Hours Backlight Warranty Guaranteed At 400cd/m2 Calibrated Luminance. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period Availability Of Support Staff Within Visayas Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/biomedical Staff. Vendor Must Have Existing/active Quality Management System Certification E.g. Ce0123 (medical Device), Or Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Vendor And / Or Manufacturer Must Provide Fda Certificaton: Fda 510(k) K131246 Or Its Equivalent, If Applicable Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or It Personnel And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipment Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And/or Iso 13485:2016 Or Its Equivalent. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Vendor Shall Provide Integration, Interoperability And Migration Solutions Exclusively Using Filmless Platforms Such As Medical Grade Clinical Monitors, 2d/3d Workstations, Dicom Enabled Printers And Cd/dvd Medical Disc Publishers, Medical Film Digitizers , Dicom Archives, Foresight Analog To Digital Conversion System, Mri Compatible Infusion Pump And Patient Monitor, And Digital Or Suites ----------------------------------------------------------------------------------------------- 2 1 Lot Portable X-ray Machine General Information General Purpose Digital Mobile Xray For Patient In Recumbent And Seated 32 Kw At 100 Kv 100 Ms Large Focus And 16 Kw At 100 Kv 100 Ms Small Focus Non Motorized Examination Can Be Performed By Connecting To The Mainpower Switch 2-axis Counterbalanced Column Arm With 90° Tube Head Rotation And ± 317° Arm Rotation Allows Easy Adjustment For All The Different Projections Generator Power Output: Large Focus: At Least 32 Kw At 100 Kv 100 Ms Small Focus: At Least 16 Kw At 100 Kv 100 Ms Kvp Range: 40 Kv To 150 Kv Mas Range: 0.32 Mas To 200 Mas Kvp Accuracy: < ± 3 Kv (40 Kv To 60 Kv); < ± 5 Kv (60 Kv To 150 Kv) Mas Accuracy: At Least ± 0.1 Mas (0.32 Mas To 2 Mas); ± 6 % (> 2 Mas) Shortest Exposure Time: At Least 1 Ms Max. Exposure Time: At Least 3.2 S Exposure Release: Handswitch With 5 M Coiled Cord Or Infrared Remote Control 1 Protection Against Electric Shock: Class I Acc. To Iec 60601-1 Xray Tube Tube Housing (single Tank With Rotating-anode Tube) Stabilization: Microprocessor-based Adjustment And Regulation During Exposure Focal Spot Nominal Value: Dual (0.6 Mm / 1.2 Mm) Anode Angle: At Least 16° Anode Speed: At Least 180 Hz (high Speed) Heat Storage Capacity Of Tube Housing: At Least 830 Kj (1170 Khu) Heat Storage Capacity Of Anode: At Least 210 Kj (300 Khu) Collimator: Manually Adjustable Multileaf Collimator, Rotatable ± 90° Collimator Light And Light Field Intensity: Led Min. 180 Lux At 1 M Sid Advanced Collimator: Pediatric Filters For Lower Dose Imaging And V-laser For Even More Magnesium-alloy Shell-type Frame Dose Area Product Measurement Chamber Typical Filtration: At Least < 0.4 Mm Al Equivalent Dap Resolution: At Least 0.01 Μgym2 Maximum Measurable Dap: 1 X 105 Μgym2 Flat Panel Wireless Detector Wireless Detector: At Least 35 Cm X 43 Cm (14 In X 17 In) Detector Detector Technology: Csi Scintillator, Amorphous Silicon (a-si) Detector Acquisition Matrix: At Least 2304 X 2800 Pixels (full Iq Performance Area) Pixel Size: At Least 150 Μm Acquisition Depth (gray Scales): At Least 16 Bit Active Area: Up To 34.6 Cm X 42.0 Cm (13.6 In X 16.5 In) Thickness: At Least 15 Mm (0.6 In) Detector Weight: ≤ 3.7 Kg (8.2 Ibs) With Battery Max. Load: At Least 300 Kg (661 Ibs) (patient Lying Down) And At Least 100 Kg (220 Ibs) (patient Standing) Data Transfer: W-lan, 802.11 A/b/g/n/ac Battery Operation Capacity: At Least 8 Hours Operation Time With At Least 320 Images, 1 Image Every 90 Sec And At Least 840 Images In Operation Mode, 1 Image Every 30 Sec. Built-in Rechargeable Battery Battery Operating Time Of At Least 8 Hours Of Continuous Use Charging Location: External Battery Charger Charging Time From Empty State To Full Charge: Within 3 Hours Image Acquisition Image Display: Fit To Window View Of Full Image Image Processing Functions: Rotation, Vertical And Horizontal Flipping, Zoom,windowing For Contrast/brightness, Black/white Image Inversion Graphic Functions: Quantification With Angle Distance Measurement Text Functions: Marking, Annotations, Image Comments, R/l Markers Tube Line Enhancement: Amplified Display Of Tubes And Lines In The Image For Position Control Security: Malware Protection Data Transfer Dicom Network Interfaces: Transmission Of Images To A Dicom Network For Viewing And Archiving Confirmation From The Image Archive Storage Commitment Printing Of Images To A Dicom Laser Camera Via Virtual Film Sheet Retrieval Of Images To A Picture Archival System Get Worklist Function For Importing Patient Data From A Data Management System (ris/his) Cr And Dx Worklist Entries Modality Peroformance Procedure Step Function For Sending Examination Statistics And Dose Information To A Data Management System Sending Of Dose Values For Each Study To An Archiving System Documentation Image Data Management: Export To Usb Device In Jpg, Dicom Dcm Or Dicom Raw Transmission Of Images To Network Automatic And Selective Printing With Virtual Film Sheet Provide- Statistics Of Rejected Images Significant Features Wlan Connectivity For Increase Reach And Improved Connectivity Pediatric Filters Transparent Filters For Lowering The Patient Entry Dose Remote Service That Allows Hardware And Software Diagnosis, Customer Care Service And System Configuration Accessories Radiation Protection Equipment, Such As Lead Gowns, Gonadal Shields, And Thyroid Shields. Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Warranty Period For Five (5) Years After The Acceptance. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user. Vendor Must Repair Or Replace Any Item And/or Part/s Of The Equipment Found To Be Defective In Material Or In Workmanship Under Normal Use, Provided That The Equipment Is In Good Working Condition Thereafter, Within The Warranty Period. Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period. Availability Of Support Staff Within Visayas. Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable. Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/ Biomedical Staff. Must Certify The Availability Of Spare Parts For The Next Five (5) Years. Vendor Must Have Existing/active Quality Management System Certification (e.g. Ce0123 Medical Device), Or Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Vendor And / Or Manufacturer Must Provide Fda Certificaton: Fda 510(k) K170476 Or Its Equivalent. Shall Be Delivered With At Least Two (2) Copies Of User Manuals. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production For At Least 2 Years, Installed And In Use At The Time Of Quote/bid Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or It Personnel And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than One (1) Year After The Warranty Period Vendor Shall Provide Integration, Interoperability And Migration Solutions Exclusively Using Filmless Platforms Such As Medical Grade Clinical Monitors, 2d/3d Workstations, Dicom Enabled Printers And Cd/dvd Medical Disc Publishers, Medical Film Digitizers , Dicom Archives, Foresight Analog To Digital Conversion System, Iramed, Mri Compatible Infusion Pump And Patient Monitor, And Digital Or Suites Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s,training And Other Sundries Necessary For The Complete Installation Of The Equipment ------------------------------------------------------------------------------------------------------------ 3 1 Lot Ultrasound Machine Electrical Power Voltage: 100 - 240 Vac Frequency: 50/60 Hz Power Consumption: Maximum Of 0.9 Kva With Peripherals Console Design At Least 4 Active Physical Probe Ports, At Least 1 Inactive Probe Storage Port Wireless Probe Connection, Capable Of Connecting Wireless And Linear Probe. Integrated Ssd (at Least 1 Tb) Integrated Dvd-r Multi Drive On-board Storage Of Thermal Printer With Inclusion Of At Least 10 Rolls Of Thermal Paper Integrated Locking Mechanism That Provides Rolling Lock And Caster Swivel Lock Front And Rear Handles Easily Removable Air Filters Operating System: Windows 10 Enterprise Ltsc 2019 (64-bit) Keyboard Operating Keyboard Adjustable In Height And Rotation Ergonomic Hard Key Layout Interactive Back-lighting Integrated Recording Keys For Remote Control Of Up To 4 Peripheral Devices Or Dicom Devices Integrated Gel Warmer Touch Screen At Least 12-inch High-resolution, Color, Touch, Display Screen Interactive Dynamic Software Menu Brightness Adjustment Key/feature Monitor At Least A 23.8-inch Wide, High-resolution High Definition Unit Display. Can Be Moved At Least 350 Mm (13.7 Inches) Horizontally In Both Directions. Can Be Moved At Least 150 Mm (5.9 Inches) Vertically At Least A 90° Swivel In Both Directions. Fold-down And Lock Mechanism For Transportation Resolution: At Least 1920 X 1080 Pixels. Anti-glare Viewing Angle: 89°/89°/89°/89°. Transducer Type Sector / Phased Array Curved Linear Array Microcurved Linear Array Linear Array Matrix Array (linear) Volume Probes (4d) Split Crystal Transesophageal Echocardiogram (tee) Probe Operating Modes Capability Brightness Mode / 2d Grayscale Motion Mode Color Flow Mode Power Doppler With Directional Map Non Doppler Color Flow For Hemodynamic Study Digital Tgc With 8 Independent Controls System Features Pre-programmable Categories Simplified User Interface For High Volume Workflow Maximum System Bandwidth: 25 Mhz Cine Memory: At Least 1 Gb Connectivity: (a) Can Do Lan Or Wireless (b) Dicom 3.0 (c) Public Sr Template (d) Structured Reporting Compatible With Vascular, Obstetric (ob), Cardiac And Breast Standards (e) Remote Monitoring Scanning Parameters Digital Beamforming;infinite Number Of Effective Channels Frame Rate: At Least 9,000 Hz Displayed Imaging Depth: 0 – 100 Cm Doppler Mode: (a) Prf: 0.4 Khz - 35.5 Khz (b) Velocity Range: ± 10 - 2,870 Cm/s Minimum Depth Of Field: 0 - 2 Cm (zoom) (probe Dependent) Maximum Depth Of Field: 0 – 100 Cm (probe Dependent) Continuous Dynamic Receive Focus Software Features Automatic Optimization Optimize B-mode Image To Help Improve Contrast Resolution With One Button Press Selectable Amount Of Contrast Resolution Improvement (low,medium, High) Continuously Adjusts B-mode Axial And Lateral Gain Uniformity And Overall Gain Level Suppressing The Noise Adjusts Region Of Interest Position, Sample Volume Position, And Steering With One Button Press Capable Of Non Doppler Color Flow For Hemodynamic Study Easy, Fast Visualization Of Tiny Vessels, Displaying As A 3d Effect. Available In Color, Power Doppler And Microvascular Imaging (mvi) Assistant Protocol Workflow Enhancement Tool For Standardized And Repetitive Exams Include Factory Programs User-defined Programs And Import Functionality Steps Include Image Annotations, Mode Transitions, Basic Imaging Controls And Measurement Image Comparison Side-by-side Comparison Of Previous Ultrasound And Other Modality Exams During Live Scanning Strain Elastography Qualitative And Semi-quantitative To Assess The Stiffness Of A Tissues. Should Be Able To Have A Qualitative Graph To Show Consistency Of Compression Available On Convex, Linear And Endovaginal Probe Shear Wave Elastography Quantitative Software For Assessing The Stiffness Of A Tissue. Measured In Kpa Or M/s Or Kpa And M/s With Quality Mode Can Do Multiple Acquisition Of Frames In One Breath Hold Able To Do A Re-measure In The Archives Available On Convex, Linear (low And High Frequency) And Endovaginal Probe Live Steatosis Quantification Able To Quantify Fatty Liver Hepatic Protocol Able To Measure Liver Steatosis And Liver Stiffness At The Same Frame. Able To Capture Multiple Frames In One Breath Hold. Virtual Convex Provides A Convex Field Of View Should Be Compatible To Spatial Compounding Available On All Linear And Sector Transducers Speckle Reduction Imaging High Definition Speckle Reduction Imaging Compatible With Side-by-side Dual-view Display Compatible With All Linear, Convex And Sector Transducers Compatible With B-mode, Color, Contrast Agent And 3d/4d Imaging Pre And Post Processing Panoramic Imaging Allows A Real-time Representation Of Long Anatomical Areas (e.g.patellar Tendon), Can Scan Up To 60 Cm Length Home Page Collection Of User’s Favorite Parameters From Measurement/comments/body Patterns Programmable Buttons Measurement For B/m/doppler User Defined Annotation For Selected Exam Category Continuous Optimization Delivers Continuously Optimized Images With Incredible Uniformity From Near To Far Field Artificial Intilligence (ai) Based Features System Capable That The User To Identify A Lesion In Breast, Thyroid Or Liver Lesion And On One Click, The Ultrasound Will Automatically Trace The Lesion System Capable To Automatically Measure The Fetal Biometry. Can Be Turned On And Off. An Ai Based Software That Automatically Determines The Location Of Vessels Both For Color Doppler And Pulsed Wave (pw) Mode. System Familiarization With The Color Preset For Abdominal Ultrasound. Automatic Measurement Of Kidney For Both Left And Right. Breast Measurement Package A Dedicated Breast-specific Measurement Package That Allows User To Make Labeling, Measuring And Describing Lesion Easy Leverage The Bi-rads Lexicon Criteria/assessment Organizes Multiple Measurements Into A Convenient Worksheet Thyroid Measurement Package Thyroid-specific Measurement Package Enables Labeling, Measuring And Describing Nodules, Lymph Nodes And Parathyroids Multiple Measurements Can Be Organized Into A Convenient Worksheet And Sends Results Via Dicom Sr Auto Intima Media Thickness (imt) Automated Method Of Measuring The Intima Media Thickness Of The Common Carotid Artery (cca) Or Internal Carotid Artery (ica) From Multiple Samples Across A User Defined Length. Photo Assistant Photograph Relevant Anatomy And Include Photos With The Clinical Images Provides Value Context For Documentation And Comparison After A Procedure Utilizes Tablet Or Phone Remote App With The Use Of Android Phone Or Tablet, The Ultrasound System Can Be Utilized Using Major Keys Like Major Modes, Freeze/print, Cursor And Etc Fusion Imaging The System Must Support A Technique That Fuses Two Different Imaging Modalities. For Hepatic Interventions, Real-time Ultrasound (us) Should Be Capable Of Being Fused With Other Imaging Modalities, Including Ct, Mri, And Pet/ct. Convex, Microconvex And Linear Probe To Have An Integrated Gps Tracker When Using The Fusion Feature. Improved Speckle Reduction Imaging Acquire Extraordinary Images Across A Broad Range Of Patients, With Incredible Uniformity From Near- To Far-field And The Penetration Power To Manage High-bmi Patients Efficiently. Micro Vascular Imaging Detects Slow Flow And Small Vessels With New Clutter Filtering, And Can Use Together With The 3d Like Feature Blood Flow. Start Protocol Automatically Select Category, Probe, Preset, Or Scan Assistant From Worklist Exam Description Learn The Category, Probe, Preset, And Scan Assistant Based On Exam Description 3d/4d Ultrasound Three-dimensional Image And Provide An Even Clear Image Of The Baby. Enhanced 3d Image A Skin Like Appearance Of A 3d/4d Image To Better Asses The Structure Of A Fetus. 3d/4d Image Rendering Automate Render Line Placement In 3d/4d Imaging, Enabling Clinicians To Easily Acquire Surface-rendered Images. Probes Convex Probe Application: Abdomen, Ob/gyn, Pediatric, Peripheral Vascular, General Musculoskeletal Bandwidth: 1.0 – 6.0 Mhz Number Of Elements: At Least 192 Field Of View (max.): 80° Cardiac/ Sector Probe Application: Adult Cardiac, Pediatric Cardiac, Adult Cephalic, Abdominal Imaging Bandwidth: 1.0 - 5.0 Mhz Number Of Elements: At Least 288 Field Of View (max.) : 120° Wireless Probe, Convex And Linear Convex Applications: Abdomen, Ob, Peripheral Vascular, General Musculoskeletal, Superficial Musculoskeletal, Cardiac And Pleural Bandwidth: 2 - 5 Mhz Number Of Elements: At Least 128 Field Of View (max.): 67° Linear Applications: Peripheral Vascular, Thyroid, Scrotal, Breast, General Musculoskeletal, Superficial Musculoskeletal, Pediatric Cephalic And Pleural Bandwidth: 3 - 12 Mhz Number Of Elements: At Least 192 Field Of View (max.): 38 Mm Linear Probe 1. Applications: Abdomen, Peripheral Vascular, Neonatal, Pediatric, Neonatal Transcranial, General Musculoskeletal, Superficial Musculoskeletal And Small Parts Inculding Breast, Thyroid And Scrotal 2. Bandwidth: 4.0 – 16.0 Mhz 3. Number Of Elements: At Least 1008 4. Field Of View (max.): 50 Mm Endocavitary Probe 1. Applications: Ob/gyn, Urology 2. Bandwidth 3.0 – 10.0 Mhz 3. Number Of Elements: At Least 192 4. Field Of View (max.): 180° Convex Volume Probe 1. Application: Abdomen, Ob/gyn, Pediatric, Neonatal 2. Bandwidth: 2.0 - 8.0 Mhz 3. Number Of Elements: At Least 192 4. Field Of View (max.): 80° Endocavitary Volume Probe 1. Application: Ob/gyn, Urology 2. Bandwidth: 3.0 - 10.0 Mhz 3. Number Of Elements: At Least 192 4. Field Of View (max.): 180° Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide (5) Years Warranty For Equipment Covering 1 Probe From 2nd Year To 5th Year Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipment Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annnual Preventive Maintenance And Calibration With Corresponding Certificates And Stickers Attached To The Unit. Vendor Must Respond With Technical Support Staff, Either Remotely Within Two (2) Hours Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And Iso 13485:2016 Or Its Equivalent. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. -------------------------------------------------------------------------------------------------------- 4 1 Lot Flexible Endoscopy Video Processor High Definition Video Outputs: Digital Visual Interface, Serial Digital Interface, Video Graphics Array Standard Video Outputs: S-video, Composite Video Baseband Signal Hd Video Recording: Built-in Workstation, Data Management & Report Editing After Procedure Can Access Data Management, Report Editing, Image Capture And Hd Video Recording Hard Disk: At Least 500gb Internal Capacity Power Requirement: 220-240 V, 60 Hz Chromoendoscopy Modes: Spectral Focused Imaging, Versatile Intelligent Staining Digital Zoom: 1.4x, 1.6x, 1.8x Color Adjustment: Red, Blue, Chroma, ±15 Levels Patient Data: At Least 10000 Records Lightsource Main Lamp: At Least 4 Light Emitting Diode Lamps With Average Working Hours Of At Least 10,000 Hours With Lifetime Indicator Light Control: Manual And Auto Adjust Air Pump: Off, Low, Mid, High Hot Plugging With Spectral Focused Imaging, Versatile Intelligent Staining With White Light Mode Power Requirement: 220-240 V, 60 Hz Monitor Medical Grade Light Emitting Diode Monitor With At Least 26 Inches Size Resolution: At Least Full Hd 1080p Visual Angle: Horizontal 178° / Vertical 178° Video Signal Input : Digital Visual Interface X1, Video Graphics Array X1, Video X1, Serial Digital Interface X1 Video Signal Output : Digital Visual Interface & Serial Digital Interface Power Requirement: 220-240 V, 60 Hz Trolley With Master Switch And Centralized Power Control With At Least Four (4) Layer Racks With Scope Holders With Built In Automatic Voltage Regulator Gastroscope Depth Of View (mm): 3-100 Field Of View: At Least 140° Distal End Diameter (mm): At Least 9.3 Bending Section Diameter (mm): At Least 9.3 Instrument Channel Diameter (mm): At Least 2.8 Angulations: At Least Up:210°; Down:90°; Left:100°; Right:100° Working Length (mm): At Least 1050 Total Length (mm): At Least 1350 Inclusion Of Distal End Cap Colonoscope Depth Of View (mm): 3-100 Field Of View: At Least 140° Distal End Diameter (mm): At Least 12 Bending Section Diameter (mm): At Least 12.5 Instrument Channel Diameter (mm): At Least 3.8 Angulations: At Least Up:180°; Down:180°; Left:160°; Right:160° Working Length (mm): At Least 1350 Total Length (mm): At Least 1700 Inclusion Of Distal End Cap Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipment Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annual Preventive Maintenance And Calibration With Corresponding Certificates And Stickers Attached To The Unit. Vendor Must Respond With Technical Support Staff, Either Remotely (2 Hours) Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user. Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System . Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And/or End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And/or Iso 13485:2016 Or Its Equivalent. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances.

Details: The subject of the Public Contract is the supply of audiovisual equipment at the address Arne Nováka 1/1, 602 00 Brno, including the location and connection of individual parts and mutual functional connection with other equipment of the client. The Supplier will also ensure the installation and programming of the software of the individual parts, including the software connection of the individual parts to functional units with the client's equipment, already installed on site. The Procurement Is Related To A Project And/or Program Financed By European Union Funds: Yes

Details: Description Republic Of The Philippines City Of Dumaguete Bids And Awards Committee Invitation To Bid For The Purchase Of 1 Unit Brand New Six (6) Wheeler Garbage Compactor Truck – Push Type Color And Other Items The City Of Dumaguete Thru Its Bids And Awards Committee (bac), Invites All Interested Manufacturers, Suppliers, Dealers And/or Distributors To Apply For Eligibility And To Submit Bids For The Supply Of: 1. 1 Unit Brand New Six (6) Wheeler Garbage Compactor Truck – Push Type Color – Black, P8,000,000.00 Driven By Six (6) Cylinder At Least 220hp Water Cooled, Turbo Charged, Diesel Engine Piston Displacement At Least 5,890 Cc; Euro – 4 Standard Emission; Left Hand Drive; Power Steering; Air Conditioned Cabin; With Tire Size At Least 8.25r16: Garbage Compartment Volume Capacity At Least 10 Cubic Meter; Transmission: Six (6) Speed M/t With Standard Hydraulic Jack, Grease Gun, Tire Wrench And Other Standard Tools, With Dumpster And Lifting Arm For The Dumpster 2. 1 Unit Brand New Tractor Head Trailer Dump, P6,000,000.00 A. Tractor Head - Brand New Ten (10) Wheeler Heavy Duty Single Cab Tractor Head Driven By Six (6) Cylinder Turbo-charged, Four (4) Cycle In – Line Water Cooled; 16 Speed Manual Transmission At Least 444hp Maximum Power; Diesel Engine With At Least 400l Fuel Tank Capacity; At Least Euro – 4 Compliant; Tire Size Including Spare Tire Of At Least 295/80 R 22.5; Front Suspension Semi – Elliptic Tapered Leaf Spring With Shock Absorbers And Rear Suspension Semi – Elliptic Leaf Springs With Torque Rods; Air Conditioned Cabin With Three (3) Person – Seating Capacity Color: Black With Decals B. Trailer Dump Specification - Brand New Twelve (12) Wheeler Trailer Dump Triple Axle With At Least 38 Cubic Meter Capacity; Tire Size (including Spare Tire) Of At Least 295/80 R22.5; Color: Black Note: Equipped With Standard Tools, Hydraulic Jack, Early Warning Device (ewd), Parts Catalogue And Service Manual Emission Standard 3. 1 Unit Brand New Tire Changer (heavy Duty-trucks), P2,000,000.00 - Tire Rim Clamping Capacity Range Of At Least 14” – 56”; Maximum Wheel Weight Of At Least 2,000 Kg: Max. Wheel Width Of At Least 1,200mm; Tire Diameter Max. Capacity Of At Least 2,500mm; Equipped With Hydraulic Pump Motor Of At Least 4.0 Kw; Overall Dimensions Of At Least 2,310mm (l) X 2,100mm (w) X 1,100mm (h); Electrical Specification 220 Volts, 60hz And 3 – Phase 4. 1 Unit Brand New Tire Vulcanizing Machine (for Trucks), P75,000.00 Power: At Least 1,000 Watts Vulcanizing Temperature: At Least 140 – 150 Degree Centigrade Repair Area: At Least 100 X 80mm Weight: At Least 11 Kg. Power Required: 220 V With Eight (8) Sets Of Mold Terms Of Reference (a) All Units Shall Be Delivered By The Supplier At The City Hall Ground, Dumaguete City Within Sixty (60) Days After The Receipt Of Notice To Proceed. (b) Bidder Must Have After Sales Support. For Item 1 & 2 Supplier Should Have An Authorized Repair Bay/ Automotive Shop Either In Dumaguete City, Bacong, Sibulan, Or Valencia. For Item 3 & 4, Supplier Should Provide Qualified Mechanic For Repair In-situ. (c) To Include Gps Tracking/monitoring System Software And Hardware For Use Of The End User. (d) Bidders Should Specify The Brand Of Their Offer And Submit A Brochure Or Picture Of Their Offered Equipment In A Class A Envelope During Submission Of Bids For Items 1,2,3 & 4. (e) Certification From Supplier Certifying That The Processing Of Vehicle Insurance & Lto Registration Is Undergoing For Items 1 & 2. (f) Bidders Must Be Iso 9001:2015 Certified. (g) Warranty Period Of At Least 2 Years (oil, Lubes, Parts, Labor And Service Support) For Item 3 & 4. (h) Warranty Period Of At Least Minimum Of 2 Years Or 60,000 Kms Whichever Comes First For Item 1 & 2. (i) Preventive Maintenance Service (pms) Of 24 Months Or 60,000kms (oil, Lubes, Parts, Labor And Service Support) For Item 1 & 2. (j) Standard Tools, Early Warning Device (ewd), Parts Catalogue And Manual Of The Equipment Should Supply Together With The Unit. (k) Submit List Of Accessories Not Included In The Brochure. Purpose: Equipment For The Operation Of Solid Waste Management Program And Other Environmental Management Protection Purposes Approved Budget For The Contract: Php16,075,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The City Of Dumaguete Now Invites Bids For 1 Unit Brand New Six (6) Wheeler Garbage Compactor Truck – Push Type Color – Black And Other Items For Equipment For The Operation Of Solid Waste Management Program And Other Environmental Management Protection Purposes. Bidders Should Have Completed And/or Accepted, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly Section Ii, Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criteria As Specified In The Implementing Rules And Regulations Part A (irr-a) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders Must Secure Eligibility Requirements And Bid Documents From The Secretariat, Bids And Awards Committee, Office On General Services, City Hall Compound, Dumaguete City. For More Information, Contact The Bids And Awards Committee Secretariat, Office Of General Services, City Hall Compound, Dumaguete City, Tel. No. 22-524-29/225-3956/225-5871. A Complete Set Of Bidding Documents May Be Purchase By Interested Bidders From December 05, 2024 To December 23, 2024 From Address Above And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of P25,000.00 The Schedule Of Activities Is As Follows: 1. Issuance Of Bid Documents December 05, 2024 2. Pre-bid Conference December 11, 2024, 10:00 A.m. 3. Submission And Opening Of Bids December 23, 2024, 10:00 A.m. Sealed Bids/proposals Will Be Received At The Office Of General Services, City Hall Compound, Dumaguete City Not Later Than December 23, 2024 And Bid Opening Shall Be On Monday, December 23, 2024 At 10:00 (ten O’clock) In The Morning At The Office On General Services, City Hall Compound, Bids Will Be Opened In The Presence Of The Bidders Or Representatives Who Choose To Attend. Late Bids Shall Not Be Accepted. Prospective Bidders Must Not Be Related To The Head Of The Procuring Entity Or Any Member Of The Bids And Awards Committee Or Its Secretariat Either By Consanguinity Or Affinity Up To The Third Civil Degree. All Bids Shall Be Accompanied By A Bid Security Payable To The City Of Dumaguete In Any Of The Acceptable Forms And In The Amount Stated In Sec. 27 Of Ra 9184. The Same Shall Guarantee That, After Receipt Of The Notice Of Award, The Winning Bidder Shall Enter Into Contract With The City Of Dumaguete Within Ten (10) Calendar Days. Copies Of This Invitation Are Posted At The Gso Bulletin Board, Dumaguete Public Market Complex, Province Of Negros Oriental General Services Office Bulletin Board, Philgeps And Dumaguete City Engineer's Office Bulletin Board. The Bids And Awards Committee Reserves The Right To 1) Reject Any Or All Bids, 2) Waive Any Defects Or Informalities Therein, 3) Or Accept Any Bids/ Or Offer/s Which It May Consider To Be Most Advantageous And Beneficial To The Government 4) To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Dumaguete City, December 04, 2024. Atty. Camelo D. Pidor, Jr. Chairman