Software Tenders

Details: De Toekomst Van De Ict En Bijbehorende Dienstverlening Voor Onderwijs- En Onderzoek Ligt Volgens Surf Én De Leden Voor Een Belangrijk Deel In De Cloud. De Leden (instellingen) Willen Daarom Flexibel Gebruik Kunnen Maken Van De Cloud En Deze Combineren Met Eigen Ict-infrastructuren (hybride Infrastructuur). Overgang Naar De Cloud Is In De Praktijk Geen Eenvoudige Stap, En Voor Veel Instellingen Geldt Dat Er Weinig Ervaring Mee Is Opgedaan. Er Kunnen Daardoor Onverwachte Uitdagingen Ontstaan Tijdens De Uitvoering Van Cloud Projecten Alsook In De Beheerfase Erna. De Initieel Beoogde Voordelen Worden Dan Niet Behaald Waardoor Afbreukrisico C.q. Kapitaalvernietiging Kan Ontstaan. Om Instellingen Te Ondersteunen Bij Deze Uitdagingen Is Het Dan Ook Gewenst Om Surfcumulus Professional Services Via Een Surf Aanbesteding Voor Hen Beschikbaar Te Maken. Surf Kiest Ervoor Om Dit Via Een Das Te Laten Verlopen. De Levering Van Surfcumulus Professional Services Is Nadrukkelijk Gekoppeld Aan De surfcumulus Dienst. Concreet Gaat Het Om Uitvoerende, Gangbare Dienstverlening Bedoeld Voor Cloud Implementatie, -migratie En -beheer. Levering Gebeurt Op Basis Van Vaste Prijs En Vaste Opleverdatum. Een Nadere Omschrijving Van De Dienstverleningonderdelen Is Als Volgt: Inrichten Van Een cloud Landing Zone, Geïntegreerd In De Bestaande (hybride) Architectuur Van Een Instelling, Ten Minste Omvattend: Account Setup: Gebaseerd Op De Administratieve Organsiatie, Compliance Richtlijnen, Bestaande Omgevingen En Structuren Van De Instelling. Network Configuratie: Volgens Richtlijnen, Binnen Cloud Omgevingen En Tussen On-premise En Deze Cloud Omgevingen. Security Baseline: Identity En Access Management Op Basis Van Surfconext, Bechikbaarheid Van Gestandaardiseerde, Hardened Machine Images, Security Policies, Network Monitoring En Log Analytics. Automation: Gestandaardiseerde Inrichting Van Security, Governance, And Kostenoptimalisatie. Uitvoeren/ondersteunen Van cloud Migraties, Door Middel Van: Lift-and-shift Migratie Scenario: Het Zonder Ingrijpende Wijzigingen (deels) Verplaatsen Van Een Ict Infrastructuur Uit Een Datacenter Naar De Cloud. Re-design Migratie Scenario: Het Cloud Ready Maken Van (een Deel Van) Een Bestaande Ict Infrastructuur En/of Het Implementeren Van Vervangende, Nieuw Te Bouwen Oplossingen Waardoor Het Potentieel Van De Cloud Optimaal Benut Kan Worden. Leveren Van cloud Managed Services in De (hybride) Cloud Infrastructuur, Waaronder Bijv.: Operations (accountbeheer, Software Update Management, Licentiebeheer, Netwerkbeheer, Backup & Restore, Monitoring, Platformbeheer) Application Management (technisch Applicatiebeheer, Functioneel Applicatiebeheer, Gegevensbeheer, Applicatie Configuratiebeheer) Service Support (incident-, Problem- & Change Management, Multi Vendor Coordinatie, Tweede En Derdelijns Support, Escalatie Afhandeling) Service Delivery (service Level Management, Capacity-, Cost- En Continuity Management) Informatie Beveiliging En Privacy Bescherming (detectie, Preventie, Rapportage, Bijsturing). Zie Verder Het Toegevoegde Document "toelatingsleidraad Das Surfcumulus Professional Services".

Details: Nsn 7r-2915-015854778-p8, Tdp Ver 001, Qty 12 Ea, Delivery Fob Origin. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders, And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Depositedin The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. Early And Incremental Deliveries Accepted And Preferred. This Requirement Will Only Be Procured From Suppliers Who Provide Faa-certified Parts Which Possess A Faa Authorized Release Certificate, Faa Form 8130-3 Airworthy Approval Tag, From Certified Repair Stations Pursuant To 14 Cfr Part 14. This Part Is A Commercial/nondevelopmental/off-the-shelf Item. Commercial Item Descriptions, Commercial Vendor Catalog Or Price Lists Or Commercial Manuals Assigned A Technical Manual Number Apply. One Or More Of The Items Under This Acquisition Is Subject To: Free Trade Agreements, If Dfars Clause 252.225-7036 Buy American Act--free Trade Agreements--balance Of Payments Program, Is Included In Thesolicitation. The World Trade Organization Government Procurement Agreement And Free Trade Agreements, If Dfars Clause 252.225-7021 Trade Agreements, Is Included In The Solicitation. The Proposed Acquisition Is 100% Set Aside For Small Business Concerns (seefar Clause 52.219-6, Notice Of Total Small Business Set-aside). The Specifictype Of Set-aside Will Be Addressed In The Solicitation Through Inclusion Ofone Of The Appropriate Clauses Listed Here: Far 52.219-3 Notice Of Hubzone Set-aside Or Sole Source Award Far 52.219-27 Notice Of Service-disabled Veteran-owned Small Businessset-aside Far 52.219-29 Notice Of Set-aside For Economically Disadvantaged Women-owned Small Business Concerns Far 52.219-30 Notice Of Set-aside For Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program Dfars 252.226-7000 Notice Of Historically Black College Or University Andminority Institution Set-aside Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094.

Details: Description Supply And Delivery Of Atomic Absoption Spectrophotometer (aas) And Total Organic Carbon/ Particulate Organic Carbon Analyzer (toc/poc) Atomic Absorption Spectrophotometer (aas) With Complete Accessories Aas Main Unit Optics Wavelength Range: At Least 185 - 900nm Monochromator: Aberation-corrected Czerny-turner Mounting Or Equivalent Number Of Grating Grooves: At Least 1800 Lines/mm Focal Length: At Least 300 Mm Grating Area: At Least 40 X 40 Mm Bandwidth: 0.2, 0.7, 1.3, 2.0l Nm (4-step Automatic Switching) Or Better Detector: Photomultiplier Tube Optics: Double Beam Background Correction: Self-reversal And Dueterium Or Equivalent Number Of Hollow Cathode Lamps: 6-lamp Turrent Or Better, And Capable Of 2 Lamps Simultaneously Lit (1 For Measurement And 1 For Warming Up For Next Measurement) Graphite Furnace Analyzer Heating Temperature Range: Ambient To At Least 3,000oc Setting Heating Condition: Maximum 20 Stages Heating Mode: Ramp Or Step Inner Gas Type: Dual Automatic Switching Type Or Equivalent Inner Gas Flow Rate: At Least 0 To 1.5 L/min With Cooling Water Flow Rate Monitor With Gas Pressure Monitor With Overcurrent Protection Unit With Furnace Block Cooling Check Flame Type: Air-cooled Premix Type Or Equivalent Burner Head: Titanium 10 Cm Slot Or Equivalent Nebulizer: Pt-ir Capillary, Ptfe Orifice, Ceramic Impact (capable Of Handling Hydrofluoric Acid) Or Equivalent Chamber: Engineering Plastic Or Equivalent Burner Atomizer: Manual Adjustment For Lateral Or Vertical, Automatic Position For Burner Height Angle Adjusment: Adjustable Burner Angle From 0 To 90o Type: Air-acetylene Flame And Nitrous Oxide-acetylene Flame Flow Rate Control: Automatic Fuel Gas Flow Rate Setting Of (0.1l/min Step) And Automatic Search Of Optimum Gas Flow Rate With Automatic Fuel Gas Leak Detector With Prevention Of Wrong Burner Head Use With Drain Tank Level Monitor With Flame Monitor With Gas Pressure Monitor With Automatic Flame Extinction Upon Power Outrage Or Sudden Power Interruption With Automatic Flame Extinction Via Vibration Sensor With Internal Fan Stop Sensor Autosampler Function: Capable To Perform Zero-point Calibration, Auto Diagnosis, Auto Rinse, Auto Mixing, And Random Access Compatibility: Flame And Furnace Measurement Sample Vial: At Least 2 Ml Reagent Vial: At Least 20 Ml Nozzle Rinse: Solvent Rinse Discharge Method Sampling Function: Dilution Function, Reagent Addition Function Syringe: At Least 250 Microliter Injection Volume: At Least 2 To 90 Microliter Repeatability: 1% Rsd For 20 Microliter Position: Minimum Of 8 Positions For Reagent And 60 Positions For Sample Software Can Perform Extrapolation Of Calibration Curve Range. If The Sample Concentration Exceeds The Calibration Curve, Additional Measurements Can Be Performed On Standard Solutions To Re-calculate The Concentration Real-time Drying And Ashing Progress Display During Furnace Measurement Capable To Set-up Sample Dilution And Spike-and-recovery Test With Overlay Function For Size And Shape Comparison Of Peak Profiles Training On The Use, Care And Maintenance Of The Equipment Other Accessories A. Complete Pc System Specification: Processor: Core I7-12700 (2.1ghz) Memory: 8gb Ddr4 3200 Storage: 1tb+256gb Ssd Display: 23.8" Ka242y (f02aka242y) Operating System: Win 11 Graphics Card: Gt1030 2gb Software: Office H&s Connectivity: Wifi/ Bt With Wireless Keyboard And Mouse B. Printer Specification: Resolution: At Least 720 X 720 Dpi Print Speed: Up To 9.0 Ipm For Black And 4.8 Ipm For Color Paper Feed Method: Friction Feed Number Of Paper Trays: 1 Paper Hold Capacity: Up To 50 Sheets Of Plain Paper (75gsm) Paper Size: A4, Letter, And Legal Interface: 2.0 Usb With 1 Set Of Refill (black, Cyan, Magenta, And Yellow Ink Bottle) C. One Set Of Standards (500 Ml) Mercury, Copper, Lead, Manganese, Cadmium, And Arsenic D. Hollow Cathode Lamp Mercury, Copper, Lead, Manganese, Cadmium, And Arsenic E. Regulator Acetylene And Argon F. Gas Cylinder, Uhp 1 Cylinder Acetylene Gas 3 Cylinders Argon Gas G. Water Circulator Circulation Method: Closed Loop Circulation Temperature Setting Range: At Least -20 To 30oc Temperature Control Accuracy: ± 2oc Or Better Pump Max Flow: 12 - 14 L/min Temperature Control: Refrigerator On-off Control Temperature Display: Digital Display Coolant: R407c Or Equivalent Cooling Capacity: At Least 1200w At Liquid Temperature 10oc H. Air Compressor During Flame Analysis Note: Warranty: Five (5) Year On Parts, Calibration, Service, Andpreventive Maintenance Service With Pm Kits Place Of Delivery - Nfrdi Quezon City Delivery Period: 30 To 45 Days Upon Receipt Of Ntp "total Organic Carbon / Particulate Organic Carbon System" Measurement Method: 680°c Combustion Catalytic Oxidation – Non Dispersive Infrared Detection (ndir) Method Operation Method: Pc Controlled Toc "measured Items: Tc, Ic, Toc (=tc-ic), Npoc (non-purgeable Organic Carbon, Toc Measurement Via Acidification And Sparging)" Applicable Samples: Aqueous Sample (optional Solid/gas Samples) Measurement Range: Tc: 0 To 30,000 Mg/l; Ic: 0 To 35,000 Mg/l (option); Tn: 0 To 10,000 Mg/l; Poc: 0 To 500 Mg/l Detection Limit: Tc, Ic: 4 Μg/l, Tn: 5 Μg/l Reproducibility: Tc, Ic, Npoc: Cv 1.5 % Max. Or ±4 Μg/l Max Measuring Time: Tc : Approx. 3 Mins; Ic : Approx. 3 Mins Sample Injection: Automatic Injection Using A Syringe Pump And Slide Type Injection Mechanism Sample Injection Volume: 10 To 2,000 Μl Variable Ic Removal: Automatic Addition Of Acid And Sparging Sample Dilution: Dilution Rate Of 2x To 50x (automatic Sample Dilution By Syringe Pump); Dilution Accuracy: ±2 % Max. (2x To 20x); ±5 % Max. (21x To 50x) "display And Operations: Operation By Color Lcd Screen And Keyboard" "carrier Gas: High-purity Air (co, Co2, Hc Content: Each 1 Ppm Max., Dew Point: -50 °c Max.); Supply Pressure: 200±10 Kpa (additional Use Of Optional Carrier Gas Regulator: 300 To 600 Kpa)" Gas Consumption: 150 Ml/min (230 To 250 Ml/min During Sparging) (variable Flow Rate) Power Supply: 100 To 240 V Ac, 600 Va Ambient Temp Range: 5 To 35°c Dimensions: W340 X D660 X H480 Mm Weight: Approx. 35 Kg "asi-l Autosampler: 24 Ml Vials, Capacity: 24 Ml X 93 Samples Can Be Added During Continuous Measurement. Includes: 100 Pcs Of 24ml Vials With Cap And Septum, 2sets Magnetic Stirrer With Stir Bars" Inclusive Of: "complete Standard Accessories/ Consumables (as Spare): Halogen Scrubber Carbon Dioxide Absorber Combustion Tube Standard Catalyst Quartz Wool (1g)" Toc-l Software "complete Computer Set (dell Desktop) Intel Core I5, Windows 10 Pro, 16gb Ram, 1tb Hdd + 256gb Ssd" Printer (epson Or Hp Continuous Colored Ink Printer) Microsoft Office With License Complete Gas Line Installation For Air (with Regulator, On/off Valve) Avr, 3 Kva 1 Tank Of Synthetic Air (for Initial Use) Suspended Sample Kit For Toc And Autosampler, 2 Pcs. Each High-salt Sample Combustion Kit High Suspension Kit Standard, Potassium Hydrogen Phthalate (khp) "solid Sample Combustion Unit Capable Of Toc And Poc Measurements In Solid Samples Tc Oxidation Method: Combustion Catalytic Oxidation (tc Furnace Temperature: 900 °c) Maximum Sample Amount: 1 G Carrier Gas: 99.9 % O2 At 500 Ml/min Features: Measurement Of Maximum 1 G Samples With Up To30 Mg Carbon Content Reduces Weighing Errors, And Errors Due To Uneven Distribution Of The Sample Carbon Content. Measurement Of Inorganic Carbon (carbonate) In Solid Samples. Measurement Of Aqueous Samples Containing Large Quantities Of Suspended Substances. " "tnm-l Tn (total Nitrogen) Unit Measurement Method: Chemiluminescence Measured Items: Tn (total Nitrogen) Measurement Range: 0 To 10,000 Mg/l Detection Limit: 5μg/l (cph, Csn) Reproducibility: Cv 3 % Max. Measuring Time: Approx 4 Min" Synthetic Air Generator (as Alternative From Using Synthetic Air Tank) "warranty: One (1) Year On Parts Five (5) Years Preventive Maintenance Service And Pm Kit (once A Year For 5 Years)" "training: 1. Includes On-site Training On Basic Instrument Principles, Operation, Maintenance, And Troubleshooting By Chemist/engineers Of The Company 2. Includes Follow-up Trainings And Assistance On The Operation. 3. Training On Toc Principles, Operation, Maintenance And Troubleshooting For Two (2) Pax." Note: Warranty: Five (5) Year On Parts, Calibration, Service, Andpreventive Maintenance Service With Pm Kits Place Of Delivery - Ffrdc, Butong, Taal, Batangas Delivery Period: 45 Days Upon Receipt Of Ntp

Details: Nsn 1r-2940-016962144-sx, Ref Nr 190618-160, Qty 22 Ea, Delivery Fob Origin. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Section I: Ptes Description & Background the Protected Tactical Enterprise Service (ptes) Is The Ground System Segment Of A System Designed To Provide An Anti-jam (aj) Wideband Satellite Communications (satcom) Capability. The Initial Use Of Ptes Is Intended For The Tactical Warfighter Using The Wideband Global Satcom (wgs) Satellites. Later Phases Of The Program Will Support Other Suitable Satellites That Can Be A Transponder For The Protected Tactical Waveform (ptw). Ptes Consists Of Components For The Joint Hub (jh), Mission Management System (mms), Key Management System (kms), Key Loading And Initialization Facility (klif), And Network Management System (nms). A Ptes Jh Functions In Conjunction With User Terminals To Support Ptw Operations On Its Forward Link (fl) And Return Link (rl). The Initial Jhs Are Being Developed And Deployed To Support Wgs Operations. A Joint Hub Variant (jhv) Will Be Developed Along With Mms Upgrades To Support Operations On Other Satellite Systems Including Those In Medium Earth Orbit (meo). the Purpose Of This Rfi Is To Conduct Market Research On The Expected Cost, Schedule, And Required Effort Associated With Modifying The Design Of The Wgs Joint Hub For Commercial Meo And Geo Applications. section Ii: Ptwoc Geo And Meo Jhv Efforts ptw Over Commercial (ptwoc) Will Extend Ptes Support Of Ptw To Operate Over Commercial Satcom (comsatcom) In Geostationary Orbit (geo) And Medium Earth Orbits (meo). This Requires Additional Terrestrial Ptes Joint Hubs And Changes To The Mms. The Need For Joint Hubs Supporting Commercial Geo Satellites Can Be Satisfied With Baseline Wgs Ptes Joint Hubs Which Will Henceforth Be Designated As Geo Joint Hubs Variants (geo Jhv). Modifications To The Jh Will Be Needed To Support Meo Satellite Operations, Which Will Be Designated Meo Joint Hub Variants (meo Jhv). The Strategy Is To Minimize The Military Unique Requirements And Maximize Commercial-ready Technology In Fielding Of The Ptwoc Geo Jh For Commercial Constellations. The Goal Is To Procure A Commercial-ready Satellite System And Focus On Software Upgrades, Integration, Installation, And On-orbit Acceptance. The Ptwoc Meo Effort Encompasses Fielding Meo Jhv At Dod Teleport Locations To Support Operations Over The O3b Mpower Constellation. Mpower Provides Continuous Capability For Meo Satcom Enabling A Resilient Multi-orbit, Multi-waveform, Multi-frequency Band Architecture As Described In The United States Space Force (ussf) Space Warfighting Analysis Center’s (swac’s) Broadband Force Design. There Are Anticipated Hardware Upgrades Encompassed In Development Efforts Expected For The Fielding Of The Ptwoc Meo Jhv In Working With Mpower Satellites Constellation. Multi-ports Design Is Required To Handle Satellites Handover Operations. ptwoc Meo Effort Is Organized In Three Phases. Phase 1 Will Provide Commercially Owned And Commercially Managed Services Via Mpower Teleport/gateway Terminals Worldwide With At Least 6 Gateways Spread Across Geographical Locations Globally To Provide Worldwide Coverage Between 47.5 Degree N/s Latitudes. Phase 2 Will Provide Non-ptw Services Via Mpower Teleport Terminals At Dod Controlled Installations. The Ground System To Be Fielded In Phase 2 Includes Three Meo-capable Terminals And Ses Commercial Equipment. This Phase Includes Integration With Ses Network Compatible With Us Government Modems. Phase 3 Will Add Ptw Services To Phase 2 Teleport Terminals Through Integration Of Ptes Jhv And Mpower Gateways/teleport Terminals At Dod Controlled Or Sponsored Locations. The Mms Upgrade Needed Doesn’t Include Planning For Phase 1 Or 2, As This Rfi Is Applicable To Phase 3. Ses Will Provide A Segment Of Spectrum With A Maximum Of 1 Ghz Per Hopping Bandwidth To Allow For Ptw Services Including Frequency Hopping And Other Ptw Features To Support Ptw And Non-ptw Waveforms. the Government Will Provide Full As-built Design Information Regarding The Baseline Ptes Jh, Mms, And Kms Components To Offerors Chosen To Build And Deliver The New Jhv Capabilities And Mms Upgrades For Ptwoc Meo And Geo Missions. This Shall Be Inclusive But Not Necessarily Limited To Interface Control Documents, Cloud Configuration, Existing Source Codes. this Rfi Specifically Requests Information Related To Phase Three Fielding Efforts As Outlined Within This Document. Responses To This Rfi Will Be Considered As Market Research In Accordance With Far Part 10 To Inform The Government’s Procurement Strategy. The Government May Or May Not Compete Or Award This Requirement. Additional Market Research May Or May Not Be Conducted. Responses From Small Businesses And Small Disadvantaged Businesses Are Highly Encouraged. The Anticipated Naics Code For This Acquisition Is 517810 And The Size Standard Is $40,000,000. section Iii: Information Request the Government Is Requesting Information On Your Company’s Ability To Perform And Deliver The Requirements As Identified In Enclosure A And The Other Enclosures Listed In Sec Iv In Response To The Following Prospective Accomplishments: describe Your Company’s Experience Related To Projects Similar In Size, Complexity, And Scope Of This Rfi Effort. contractor Shall Design And Build Jhvs Solution For Both Commercial Meo And Geo Missions Either As A Single Architecture Or Separately Based On The Design Trades. contractor Shall Support Mission Management System (mms) Software Upgrade To Accommodate Both Commercial Meo And Geo Missions. contractor Shall Integrate, Install, Test And Field A Ptw Teleport Capability As Usg Designated Locations Both Commercial And Dod Operated For Both Meo And Geo Missions. In Addition, Shall Provide Test Results To The Government. contractor Shall Perform System-level And End-to-end Testing For Meo And Geo Missions Respectively. contractor Shall Provide And Configure A Test Environment For Independent Security Assessment (sa). This Includes Providing Smes As Needed During The Sa. contractor Shall Design, Build, And Test Jhvs Utilizing The Security Controls That Are Allocated To Other Ptes Jhs. contractor Shall Perform Maintenance To Fielded Hardware When Required For Upgrades Or Replacement Of Obsolete Or Broken Parts. contractor Shall Identify Potential Program Risks And Mitigations. include Company’s Technical Competency In Satcom Ground Systems Hardware And Software Development Principles And Approaches. discuss Your Company’s Ability To Satisfy The Meo/geo Capability Requirements Listed Above As Well As To Be Compliant With Cybersecurity And Information Assurance Requirements. contractor Shall Deliver A Rom Schedule For Build Of A Jhvs Solution For Both Commercial Meo And Geo Missions Either As A Single Architecture Or Separately Based On The Design Trades. Please Account For The Development Timeline Of Meo Handover Planning. contractor Shall Deliver A Rom Of Cost For Build Of A Jhvs Solution For Both Commercial Meo And Geo Missions Either As A Single Architecture Or Separately Based On The Design Trades. contractor Shall Deliver A List Of Technical Documents That Would Be Required To Adequately Respond To A Request For Proposal. please Note: All Documents Listed Within Are Draft Pre-decisional, Notional, For Market Research And Not For Action. additionally, The Technical Documents Mentioned In “enclosures” Are Provided To Assist Your Company Gain An Understanding Of The Project Scope And Requirements. section Iv: Response Format, Submittal Instructions, And Questions response Format – Responses Shall Be Submitted As A White Paper In Pdf Or Microsoft Word For Office 2007 Or Later Compatible Format, Supplemented With Microsoft Word, Excel, Powerpoint, Pdf, Or Jpg Attachments As Necessary. Responses Shall Be Prepared So That When Printed, They Meet The Following Requirements: 8.5x11 Inch Paper, Single-spaced Typed Lines, 1 Inch Margins, 12 Point Times New Roman Font. Tables May Use 10-point Font. Graphics Or Pictures Are Not Allowed. Illustrations Such As Tables, Flowcharts, Organizational Charts, Process Charts Or Other Similar Type Informational Charts May Be Used. Respondents Are Responsible For Ensuring The Legibility Of All Tables, Charts, Etc., And Should Assume That When Their Response Is Printed Or Copied, It Will Be Done In Black And White. The Government Will Not Accept Company Literature Or Marketing Materials In Response To This Notice. response Classification – All Material Provided In Response To This Notice Shall Be Unclassified, Non-confidential, And Non-proprietary To The Maximum Extent Practicable. Firms Providing Confidential/proprietary Information Shall Separately And Clearly Identify And Mark All Confidential/proprietary Information. The Government Will Take All Necessary Steps To Protect/safeguard Any Confidential/proprietary Information Not Clearly Marked. submittal Pocs – Responses Shall Be Submitted Electronically. Unclassified Submittals Shall Be Submitted To Scott Lucas, Contracting Officer, At Scott.lucas.1@spaceforce.mil. submittal Due Date – Responses Are Due By 12:00 Pm (pacific Time) On 12 March 2025. questions And Communications – All Questions And Communication Associated With This Rfi Shall Be Submitted In Writing To Scott Lucas, Contracting Officer, At Scott.lucas.1@spaceforce.mil. section V: Disclaimers this Is A Request For Information Only. This Notice Is Issued Solely For Information And Planning Purposes. It Does Not Constitute A Solicitation (request For Proposal Or Request For Quotations) Or A Promise To Issue A Solicitation In The Future. This Notice Does Not Commit The Government To Contract For Any Supply Or Service Whatsoever. Furthermore, The Government Is Not, At This Time, Seeking Proposals. Respondents Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Notice. The Government Will Not Assume Liability For Costs Incurred By Any Attendee For Travel Expenses Or Marketing Efforts. All Costs Associated With Responding To This Notice Will Be Solely At The Responding Party's Expense. proprietary Information, If Any, Should Be Kept To A Minimum And Shall Be Clearly Marked. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned. In Order To Review Rfi Response, Proprietary Information May Be Given To Federally Funded Research And Development Center (ffrdc) And/or Advisory And Assistance Services (a&as) Contractors Working For The Government. Non-government Support Contractors Listed Below May Be Involved In The Review Of Any Responses Submitted. These May Include But Are Not Limited To: The Aerospace Corporation (ffrdc), Mitre (ffrdc), Linquest Corporation, (se&i), Booz Allen Hamilton (a&as), And Their Subcontractors. section Vi: Enclosures enclosure 1 – Joint Hub Variant Requirements enclosure 2 - Mil-std-188-164c (for Public Release) enclosure 3.a. – Dodi 8510.01 (for Public Release) enclosure 3.b. – Nist Sp 800-53 Rev 5 (for Public Release) enclosure 3.c. - Cnssi No 1253 (for Public Release)

Details: Federal Business Opportunities (fbo) sources Sought Notice solicitation Number: 75n95025q00125 2. Title: Brand-name Or Equal, Acquisition Of Agilent Bioanalyzer 5200 Fragment Analyzer System For Etb Group At Ncats. 3. Classification Code: 6640 4. Naics Code: 334516 – Analytical Laboratory Instrument Manufacturing Dollars Or Number Of Employees: 1,000 Employees description: the Purpose Of This Requisition Is To Procure Brand Name Or Equal, Acquisition Of Bioanalyzer 5200 Fragment Analyzer System For Etb Group At Ncats. The Item Includes The Agilent Bioanalyzer 5200 Fragment Analyzer System, Computer And Monitor, Controller And Analysis Software, Capillary Array, And Installation/familiarization Services.for Advancing Translational Sciences (ncats) background: the National Institutes Of Health (nih) Is The Nation’s Leading Medical Research Agency And The Primary Federal Agency Whose Mission Is To Seek Fundamental Knowledge About The Nature And Behavior Of Living Systems And The Application Of That Knowledge To Enhance Health, Lengthen Life, And Reduce Illness And Disability, Conducting, Supporting And Making Medical Discoveries That Improve People’s Health And Save Lives. the National Center For Advancing Translational Sciences (ncats) Is A Part Of The National Institutes Of Health (nih), Whose Mission It Is To Catalyze The Generation Of Innovative Methods And Technologies That Will Enhance The Development, Testing And Implementation Of Diagnostics And Therapeutics Across A Wide Range Of Human Diseases And Conditions. the Bioanalyzer 5200 Is A Highly Validated Piece Of Equipment For Nucleic Acid Quantification And Characterization, Which Is Important Step In Studies That Intersect With Next-generation Sequencing Approaches. The Fragment Analyzer System Is A Multiplexed Capillary Electrophoresis (ce) Instrument For Performing Automated, High Throughput Separation And Quantification Of Double Stranded Nucleic Acids (dna And/or Rna). Separation Is Achieved By Applying An Electric Field Through A Narrow Bore (50 µm I.d.) Fused Silica Capillary Array Filled With Various Conductive Gel Matrices Designed To Sieve Dna/rna Molecules Of A Specific Size Range. When A High Voltage Is Applied To The Capillary Array, Injected Dna/rna Migrates Through The Gel Matrix As A Function Of Length Or Size, With Smaller Sized Fragments Eluting Faster Than Larger Sized Fragments. At A Point Toward The Far End Of The Capillary Array, Detection Of The Separated Dna/rna Is Achieved By Fluorescence Of A Sensitive Intercalating Dye Present In The Separation Gel Matrix, Which Fluoresces When Bound To Double Stranded Dna Or Rna Molecules. The Fragment Analyzer System Utilizes A High Intensity Light Emitting Diode (led) Excitation Light Source That Is Focused Across The Capillary Array Detection Window And Imaged Onto A Sensitive, Two-dimensional Charge-coupled Device (ccd) Detector. By Monitoring The Relative Fluorescence Unit (rfu) Intensity As A Function Of Time During The Ce Separation, Digital Electropherograms Representative Of The Dna/rna Content Of 12-, 48-, Or 96-samples Are Collected In A Single Experimental Run. purpose And Objectives: brand Name Or Equal, Acquisition Of Agilent Bioanalyzer 5200 Fragment Analyzer System For Etb Group At Ncats. The Item Includes The Bioanalyzer 5200 Fragment Analyzer System, Computer And Monitor, Controller And Analysis Software, Capillary Array, And Installation/familiarization Services. The Bioanalyzer 5200 Fragement Analyzer Can Characterize Nucleic Acids And Sequencing Libraries. The Agilent 5200 Is A Mid-throughput, Electrophoresis Machine For The Analysis Of Dna & Rna. The System Utilizes A Plate-based, Capillary System With A Self-loading Electrophoretic Gel, To Analyze As Little As 50 Pg/ul Of Rna Or 300 Pg/ul Of Dna. The 5200 Is Able To Run Up To 288 Samples Without Manual Intervention From Multiwell Plates And Has Improved Sensitivity And Resolution Over The Bioanalyzer 2100. project Requirements: one (1x) Bioanalyzer 5200 Fragment Analyzer System As Listed In This Documentation. salient Characteristics capillary-based, Automated, High Throughput Separation And Quantification Of Double Stranded Nucleic Acids (dna And/or Rna), With Generation Of Digital Electropherograms For Quantitation Of Nucleic Acid Size (bp) And Concentration. anticipated Period Of Performance: anticipated To Be Delivered Approximately 30 Days Aro place Of Delivery: the Place Of Delivery Shall Be: 9800 Medical Center Dr Bldg B Rockville, Md 20850 other Important Considerations: Independently And Not As An Agent Of The Government, The Contractor Shall Furnish All The Necessary Services, Qualified Personnel, Material, Equipment, And Facilities, Not Otherwise Provided By The Government As Needed To Perform The Work Mentioned Above. capability Statement /information Sought. Respondents Must Provide Clear And Convincing Documentation Of Their Capability Of Providing The Services Specified In This Notice. Also, Information Must Be Provided In Sufficient Details Of The Respondents’ (a) Staff Expertise, Including Their Availability, Experience, Formal And Other Training; (b) Current In-house Capability To Perform The Work; (c) Prior Completed Projects Of Similar Nature; (d) Corporate Experience And Other Management Capability; And (e) Examples Of Prior Completed Government Contracts, References, And Other Related Information. the Respondent Must Also Provide Their Duns Number, Organization Name, Address, Point Of Contact, And Size And Type Of Business (e.g., 8(a), Hubzone, Etc., Pursuant To The Applicable Naics Code And Any Other Information That May Be Helpful In Developing Or Finalizing The Acquisition Requirements. one (1) Copy Of The Response Is Required And Must Be In Microsoft Word Or Adobe Pdf Format Using 11-point Or 12-point Font, 8-1/2” X 11” Paper Size, With 1” Top, Bottom, Left And Right Margins, And With Single Or Double Spacing. the Information Submitted Must Be In And Outline Format That Addresses Each Of The Elements Of The Project Requirement And In The Capability Statement /information Sought Paragraphs Stated Herein. A Cover Page And An Executive Summary May Be Included But Is Not Required. the Response Is Limited To Ten (10) Page Limit. The 10-page Limit Does Not Include The Cover Page, Executive Summary, Or References, If Requested. the Response Must Include The Respondents’ Technical And Administrative Points Of Contact, Including Names, Titles, Addresses, Telephone And Fax Numbers, And E-mail Addresses. all Responses To This Notice Must Be Submitted Electronically To The Contract Specialist And Contracting Officer. Facsimile Responses Are Not Accepted. the Response Must Be Submitted To Giuliana Faller, Contract Specialist At E-mail Address Giuliana.faller@nih.gov. the Response Must Be Received On Or Before January 27, 2025, At 9 Am Eastern Time. “disclaimer And Important Notes: This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Qualifications To Perform The Work. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Presolicitation Synopsis And Solicitation May Be Published In Federal Business Opportunities. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality: No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).”

Details: Notice Id Number Nist-ssn-25-670237 title:sources Sought Notice For Iq Record And Playback the Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. background the Smart Connected Systems Division (scsd) Of The National Institute Of Standards And Technology (nist) Communications Technology Laboratory (ctl) Is Developing New Industrial Wireless Research Testbed Capabilities To Aid The Development Of Standardization And Guidance For Next Generation Wireless Systems Deployed In Mission Critical Factory And Other Mission Critical Environments. the Scsd Requires An Instrument With Precision Measurement And Recording Capability For Characterizing And Testing The Performance Of Industrial Wireless Systems Under The Impact Of Wireless Interference As Measured At Baseband (iq). nist Is Seeking Information From Sources That May Be Capable Of Providing The Following The Items, Along With Associated Software, Operation Manuals, Operation Training, And Software Maintenance Support: one (1) Radio Frequency (rf) Record And Playback Digital Section capable Of Recording, Analyzing, And Reproducing Rf Signal, Noise, Jamming, Or Interference With A Range Of 30 Mhz To 8 Ghz. offering 500 Mhz Per Channel Minimum Record And Playback Bandwidth offering 4-hour Minimum Recording Duration At Nominal Instantaneous Bandwidth Of 200 Mhz offering Labview Native Application Programming Interface (api) one (1) Signal Conditioning Unit For 1 Ghz To 8 Ghz Operation. rf Pre-selection Functionality To Reject All Interfering Signals Outside The Band Of 1 Ghz To 8 Ghz low Noise Amplification (lna) With A Noise Figure Less Than 4 Db dimensions Shall Not Exceed 9.9 X 7.2 X 1.6 (l X W X H Inches), Including All Protrusions, Due To Lab Space Constraints weight Shall Be Less Than 3 Pounds Due To Nist Mobility Constraints one (1) Signal Conditioning Unit For 380 Mhz To 470 Mhz Operation rf Pre-selection Functionality To Reject All Interfering Signals Outside The Band 380 Mhz To 470 Mhz low Noise Amplification (lna) With A Noise Figure Less Than 4 Db dimensions Shall Not Exceed 9.9 X 7.2 X 1.6 (l X W X H Inches), Including All Protrusions, Due To Lab Space Constraints weight Shall Be Less Than 3 Pounds Due To Nist Mobility Constraints how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. please Provide The Following Information By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Products/services That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name model Number performance Capabilities if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) state Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. if The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors To Which You Provided The Recommended Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By January 29, 2025. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). the Responses Shall Not Exceed Three Pages Including All Attachments, Charts, Etc. thank You For Taking The Time To Submit A Response To This Request!

Details: Network Contracting Office (nco) 16 Will Be Issuing A Request For Quotation (rfq) For The South Central Va Health Care Network (scvahcn) Visn 16 In The Coming Months To Award A Cost Per Patient Reportable Result (cprr) Blanket Purchase Agreement (bpa) For Visn Wide Standardized Automated Chemistry And Immunochemistry Instrumentation And Testing To A Federal Supply Schedule Fsc Group 66 Iii Schedule Holder Manufacturing Instrumentation And Reagents And Performing Service And Repair Under Sin 605-1a. The Bpa Will Include Use Of Instrumentation, Reagents, Calibrators, Controls, Consumables, Parts, Contractor Performed Operator Training, Contractor Performed Preventative Maintenance, Repair, And Remote Troubleshooting And Connectivity Through Data Innovations Middleware To The Va Vista Lab Information System (lis). the Fully Automated Instrumentation Shall Have Random Access Testing Capabilities And Be Able To Simultaneously Perform The Complete Profile (full Test Menu) Meeting The Performance Characteristics For Accuracy And Precision As Defined By The 1988 Clinical Laboratory Improvement Act (clia) And The Clinical And Laboratory Standards Institute (clsi). testing Instrumentation And Reagents Shall Be Fda Approved And Validated For Use. contractor Has Proprietary Reagents For Proposed Instrumentation, Use Of Third Party Reagents (user-defined Applications) Should Be Kept To A Minimum. reagents Shall Be Liquid Ready To Use Or Require Minimal To No Operator Preparation Prior To Use. new Equipment Is Required For Each Of The Clinical Laboratories Located At The Visn Facilities Listed In The Visn 16 Site Visit Workbook. Includes 8 Medical Center And 20 Outpatient Clinic Laboratories. instrumentation Shall Have A Current Va Enterprise Risk Assessment (era). same Manufacturer, Methodology And Reagent System For Testing Instrumentation Across Visn 16 Laboratories (for Like Tests). immunochemistry (ic) Test Menu/reagent Capacity Shall Be Sufficient To Support Testing For The Full Laboratory Test Menu On A Single Instrument. Additionally, Each Ic Instrument Shall Have Excess Reagent Position Capacity. a Ups With Surge Suppressor/line Conditioner Shall Be Provided For Each Instrument/piece Of Equipment. all-inclusive Cprr Pricing. pre And Post Analytical Automation Requirements For Medical Center Laboratories And The Joint Ambulatory Care Center In Pensacola. automation Line Requirements Include But Are Not Limited To Centrifuges, Decappers, Recappers, Aliquotors, Refrigerated Storage As Well As Instrument And Specimen Management Systems. data Management Systems To Enhance Workflow And Operations For All Instrumentation. for Instrumentation That Requires A Continuous Feed Of Water, Water Systems Capable Of Generating The Required Quality, Pressure And Volume Of Water To Meet Manufacturer S Specifications And Sustain Instrument Operations To Support Maximum Throughput Are Required To Be Provided By The Contractor For Each Instrument. for Laboratories Requiring More Than One Water System, The Configuration Should Be Established To Support Instrument Operations Through The Use Of A Large Temporary Water Storage Tank Or Similar Application Should One Water System Be Non-operational. water System Configuration Shall Also Support Bypassing The Temporary Water Storage Tank As Necessary. basic Operator Training On Testing Instrumentation For All Operators. key Operator Training (off-site) For 2 Operators The Base Year And One Operator Each Subsequent Year. Training Requirements Are Per Instrument. telephone Assistance Center/hotline- Available By Telephone 24 Hours Per Day, 7 Days Per Week With Immediate Response Or A Call Back Time Of 30 Minutes. equipment Repair Shall Be Provided 24 Hours Per Day, 7 Days Per Week For Medical Center Labs And 5 Days Per Week Business Hours For Outpatient Clinic Labs. a Va Approved Mou/isa Is Required To Provide And Support Remote Troubleshooting For All Laboratories. the Above Is Not An All-inclusive List Of Requirements. The Minimum Technical Requirements And Technical Evaluation Factors Will Be Included In The Solicitation When Posted. All Instrumentation Must Be Fda Approved, In Current Production At The Time Of Quotation Submission, Discontinued Models And Refurbished Instrumentation Shall Not Be Presented. Operating System Software Shall Be Currently Sold And Supported By Its Manufacturer. Instrumentation, Systems And/or Devices With Operating Systems Such As Windows Xp, Windows, 6 Ce Embedded, Etc. Shall Not Be Proposed. this Is A Pre-solicitation Notice Only And Is Not The Actual Rfq.â  The Rfq Will Be Posted To Gsa E-buy At A Later Date. the Purpose Of This Notice Is To Provide Fss Fsc Group 66 Iii Contractors Minimally Meeting The Above Requirements The Opportunity To Conduct Site Visits With Participating Laboratories To Assess The Requirements For Each Site And Inform Laboratories Of Their Instrumentation Available To Potentially Meet Those Requirements.  the Visn 16 Site Visit Workbook Contains 3 Tabs. The First Tab Lists The Address, Phone Number, Name Of The Lab Manager And/or Points Of Contact For The Visn 16 Laboratories To Assist Contractors In Scheduling Site Visits.â  The Second Tab Contains Existing Instrumentation And New Instrumentation Requirements For Each Lab. The Third Tab Provides The Annual Estimated Testing Volumes For Each Laboratory And Their Respective Test Menu. Note: Visn 16 Site Visit Workbook Contact Information, Equipment Requirements And Test Menus Are Subject To Change Prior To The Posting Of The Competitive Solicitation/rfq. site Visits Are Authorized From The Date Of This Posting Until 02/28/2025. vendor Site Visits Shall Be In Person And Include The Appropriate Stakeholders For Each Laboratory. The Visit Shall Be Scheduled In Advance At A Mutually Agreed Upon Date And Time, To Ensure Patient Care Is Not Compromised And Presentations/discussions Are Well Attended. This Is An Opportunity For Each Vendor To Discuss Equipment Operation, Technical Capabilities, Maintenance Requirements (both Operator And Contractor Performed), Data Management Functionality And Connectivity With Each Laboratory Related To Their Specific Requirements. Contractors Shall Also Discuss Site Specifications Including Utilities, Space Requirements, And Weight For Each Instrument Model, Automation Line Component, Etc. Literature Detailing Site Specifications Shall Also Be Provided In Written Or Electronic Format To Each Laboratory. The Expectation Is That All Participating Laboratories Listed In Attachment A Are Visited. Due To The Complexity Of Automation Lines And Space Requirements More Than One Visit May Be Necessary For The Medical Center Laboratories And The Joint Ambulatory Care Center In Pensacola. Visits And Presentations For Outpatient Clinic Labs Should Be Accomplished In A Single Visit. please Do Not Take In Equipment Or Take Va Staff To See Equipment. A Draft Test Menu And Annual Estimated Volumes (this Could Change Prior To The Posting Of The Rfq) For Each Lab Has Been Provided. Using That Information You Should Present How Your Instruments Would Manage That Workload. Cad Drawings Will Not Be Provided For The Site Visit, However, Photos For Laboratories Requiring Automation Lines Will Be Provided Upon Request. Additionally, Any Request For The Use Of Digital Measurement Software And/or Platforms Shall Be Submitted To Diyonne Williams, Contracting Officer, At Diyonne.williams@va.gov, For Review Well In Advance Of Any Scheduled Site Visit. Include 36c256-24-ap-5589 Chemistry Site Visit In The Title Of Your Email.

Description: Contact Information|4|n/a|wv9|n/a|n/a| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|stand-alone Receiving Report - Certifications Combo - Receiving Report & Invoice - Material |n/a|tbd|n00104|tbd|tbd|n50286|tbd||n/a|n/a||n/a|n/a||n/a| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (jan 2025)|13|326220|800|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| 1.drawings And Technical Data Are Not Available From The Government. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed herein. 2.portsmouth Nsy's Dodaac Has Changed From N00102 To N50286. Any Reference To N00102 Within This Order Should Be Updated To N50286. 3.the Following Proposed Delivery Schedule Applies: final Delivery Of Material (365 Days) notice To Contractor's Providing Surplus Material: 4.a Surplus Material Certificate And Label Must Accompany Your Quotation For Surplus/new Surplus/new Manufactured Surplus Material. All Surplus Material Must Have Traceability Back To A Government Contract In Order To Be Considered For Award. Without This information We Are Unable To Determine When The Government Purchased And Inspected The Item And Therefore, We Cannot Be Assured Of Technical Acceptability. 5.the Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. 6.any Contract/order Awarded As A Result Of This Solicitation Will Be A "do" Rated Order Certified For National Defense Use Under The Defense Priorities And Allocations System (dpas). See 52.211-14, Notice Of Priority Rating For National Defense, Emergency preparedness, And Energy Program Use. 7. This Order Is Issued Pursuant To Emergency Acquisition Flexibilities (eaf). \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture Or Refurbishment And The Contract Quality Requirements For The Hose Assy . 2. Applicable Documents 2.1 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Must Take Precedence. Nothing In This Contract/purchase Order, however, Must Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. 2.2 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.2.1 The Documents And Drawings Listed Below Under Drawing No. Are Not Provided With This Contract/purchase Order. drawing No Cage Rev Distr Cd ;g765-6511 96169 A D 2633-225-01 96169 V D g765-0601 96169 C B; 2.2.2 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2.3 Specification Revisions - The Specification Revisions Listed Under "documents References" Below Are The Preferred Revision. Older And/or Newer R Evisions Are Acceptable When Listed Within Contract Support Library Reference Number Csd155 In Ecds (electric contractor Data Submission) At: Ht Tps://register.nslc.navy.mil/. This Is To Allow Contractors To Use Certain Acceptable Older Specification Revisions To Purge Their Existing Stock Of Material Certified To Those Older Revisions Or To Use Newer Specification revisions When Material Is Certified To Newly Released Revisions,without Requiring The Submittal Of Waiver/deviation Requests For Each Specification Revision On Every Contract. Revisions Of Specifications Reflecting Editorial And/or Re-approval (e.g. E2009, r2014, Etc.) Are Considered Inconsequential, But Are Acceptable When Their Revisions Are Listedwithin Csd155 Or Elsewhere Within This Contract. document Ref Data=mil-std-130 | | |n |121116|a| |01| 3. Requirements 3.1 Design, Manufacture, And Performance - Except As Modified Herein, The Item Furnished Under This Contract/purchase Order Must Meet The Design, Manufacture, And Performance Requirements Specified On Cage ;96169; drawing ;g765-6511 Part Number F208 And 2633-225-01 Assembly 256a; . 3.2 Marking - This Item Must Be Physically Identified In Accordance With Mil-std-130. 3.3 Configuration Control - The Contractor Must Maintain The Total Equipment Baseline Configuration. For Items Of Proprietary Design, Contractor Drawings Showing The Latest Assembly Configuration Must Be Provided To The Government Inelectronic (c4) Format. definitions Are Provided Elsewhere In The Contract/purchase Order. 3.3.1 Waivers/deviations - Waivers And Deviations Must Be Designated As Critical, Major, Or Minor. All Waivers And Deviations Require Review And Approval Bythe Contracting Officer. A Copy Of Approved Waivers And Deviations With Related Oqe Must Be Submitted via Wawf As Part Of The Entire Oqe Package. (soc Mcd C Material Requires Both Approved And Disapproved Waivers And Deviations Be Submitted) Requests Must Include The Information Listed Below. a. A Complete Description Of The Contract Requirement Affected And The Nature Of The Waiver/deviation (non-conformance), Including A Classification Of Critical, Major, Or Minor. b. Number Of Units (and Serial/lot Numbers) To Be Delivered In This Configuration. c. Any Impacts To Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel Or Impacts To Theoperational Use Of The Product. d. Information About Remedial Action Being Taken To Prevent Reoccurrence Of The Non-conformance. 3.3.2 All Requests For Waivers/deviations On Navsup-wss Contracts Must Be Submitted Using The Ecds (electronic Contractor Data Submission) System At Https://register.nslc.navy.mil/ 3.3.3 Ecps - The Government Will Maintain Configuration Control And Change Authority For All Modifications Or Changes Affecting Form, Fit, Function, Or Interface Parameters Of The Equipment And Its Sub-assemblies. The Contractor Must Submit An Engineering change Proposal (ecp) For Any Class I Or Ii Changes That Impact The Equipment Covered By This Contract. Ecps Must Be Prepared In Contractor Format, And Must Include The Following Information: a. The Change Priority, Change Classification (class I Or Class Ii), And Change Justification. b. A Complete Description Of The Change To Be Made And The Need For That Change. c. A Complete Listing Of Other Configuration Items Impacted By The Proposed Change And A Description Of The Impact On Those Cis. d. Proposed Changes To Documents Controlled By The Government. f. Recommendations About The Way A Retrofit Should Be Accomplished. g. Impacts To Any Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel In Support Of Theproduct. h. Impacts To The Operational Use Of The Product. i. Complete Estimated Life-cycle Cost Impact Of The Proposed Change. j. Milestones Relating To The Processing And Implementation Of The Engineeringchange. 3.4 Mercury Free - Mercury And Mercury Containing Compounds Must Not Be Intentionally Added Or Come In Direct Contact With Hardware Or Supplies Furnished Under This Contract. Mercury Contamination Of The Material Will Be Cause For Rejection. 4. Quality Assurance 4.1 Notes To The Contractor - 4.1.1 The Contractor For Proprietary Designs - Departures From Contractor Imposed Requirements, Not Specifically Covered By The Contract, Must Be Judged Individually On The Basis Of The Effect, If Any, On Contractual Requirements. The Departure Must Be considered A Nonconformance And Be Submitted To The Pco For Disposition. 4.1.2 The Contractor For Proprietary Designs - All Records Of Departures From Contractor Imposed Requirements Must Be Maintained And Available For Review At The Contractor's Facility. A Record Of These Departures, Traceable To The Applicable Part Number And contract Number Must Be Submitted To The Pco. 4.1.3 The Contractor For Proprietary Designs - For Proprietary Designs, The Contractor's Part Numbers Are Acceptable For Reference Only. The Delivered Material Must Conform To All Drawings, Specifications, And Other Contractual Requirements. 4.1.4 The Contractor - The Ecds (electronic Contractor Data Submission) System Is Available For Certain Data Submissions, And To Submit Questions And Clarifications, And Waiver Requests On Contracts And Solicitations. Ecds Can Be Found At: https://register.nslc.navy.mil/ 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Must Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. 6.1.1 There Are 7 (seven) Separate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.2 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss.

Description: Sources Sought Notice sources Sought Notice page 6 Of 6 sources Sought Notice *= Required Field sources Sought Notice page 1 Of 6 this Request For Information Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. this Is A Request For Information (rfi)/sources Sought Notice (ss), This Is Not A Request For Quotes (rfq) Or Request For Proposals (rfp). No Formal Solicitation Document Exists At This Present Time. This Is Not A Solicitation Announcement. The Purpose Of This Sources Sought Notice Naics 339113 - Surgical Appliance And Supplies Manufacturing Psc 6530 Hospital Furniture, Equipment, Utensils, And Supplies Naic Size Standard Of 800 Employees For The Beckley Vamc. responses To This Sources Sought Notice Will Be Utilized By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought Notice, A Solicitation Announcement May Or May Not Be Published In Sewp, Fedbizopps (fbo) Or Gsa Ebuy. requested Information responses To This Sources Sought Notice Shall Also Include: Company Name, Address, Point Of Contact, If Applicable Contract Number, Product Brochures, Place Of Manufacturer, Naic/psc Codes, Sam Uei Number, And Business Size. If Vendor Is Interested And Capable, And Can Provide The Required Product/service, Please Provide The Requested Information For Questions 1-15 As Indicated Below: is This Service/product Priced On Vendor S Gsa/sewp/fss/nac/sac Contract? Yes/no if Yes, Provide Vendor Government Contract Number Or Leave Blank? is This Service/product Open Market Pricing? Yes/no is Open Market Priced Online? Yes/no provide Vendor S Business Size Status And Representations Naic And Psc Code? does Vendor Have Capability, Product, And Interest For Brand Name Patient Lift System End Item Product Requirement? Yes/no does Vendor Have Capability, Product, And Interest Of An Equal Patient Lift System End Item Product? Yes/ No if Equal Product End Item; Provide Equal Product Name/model/ Product Brochure/ Specification Sheet/warranty/life Expectancy/maintenance Requirements Information. where Is Brand Name End Item Patient Lift System Product Place Of Manufacturer,- Complete Table Below? where Is Equal End Item Patient Lift System Product Place Of Manufacturer- Complete Table Below? is Interested Vendor Lg/sb/sdvosb/vosb (which Bs) Manufacturer Or (which Bs) Authorized Distributor Of An Equal Domestic Patient Lift System End Item Product? is Interested Vendor Lg/sb/sdvosb/vosb (which Bs) Manufacturer Or (which Bs) Authorized Distributor Of Brand Name A Domestic Patient Lift System End Item Product? is Interested Vendor Lg/sb/sdvosb/vosb (which Bs) Manufacturer Or (which Bs) Authorized Distributor Of Nondomestic Patient Lift System Brand Name End Item Product? is Interested Vendor Lg/sb/sdvosb/vosb (which Bs) Manufacturer Or (which Bs) Authorized Distributor Of Nondomestic Patient Lift System Equal End Item Product? provide 2024 Signed Copy Authorized Distributor Letter If Vendor Is Not The Manufacturer. sow general Information brand Name Sow Patient Lift System Install/deinstall Or Equal Purchase And Authorized Installer Requirement minium Technical Requirement 2.7.1. Fixed Ceiling Lift 2.7.1.1. Manual Traverse 2.7.1.2. Lift Motor: 24 Volt 2.7.1.3. Lift Capacity At Least 600 Lbs 2.7.1.4. Unit Weight Max 45 Pounds 2.7.1.5. The Patient Lift Unit Must Be Able To Collect And Report The Following Data At Each Lcd Display Unit: 2.7.1.5.1. Lift Life Total Count 2.7.1.5.2. Total Number Of Load Weighing More Than 330lbs 2.7.1.5.3. Number Of Lifts In The Last 7 (seven) Days 2.7.1.5.4. Average Number Of Lifts Per Week 2.7.1.6. The Patient Lift Unit Must Also Be Able To Report The Following Additional Safety / Maintenance Data Via Usb Connection To A Laptop / Tablet: 2.7.1.6.1. Lifting Strap Life Total Count 2.7.1.6.2. Critically Low Battery Life Count 2.7.1.6.3. The Total Number Of Weightings 2.7.1.6.4. Total Lifting Time 2.7.1.7. Software Transfer Data Must Operate With Va Existing It Infrastructure. (laptop / Tablet Usb/cord Connection Solution). 2.7.1.8. Wi-fi Compatibility Will Not Be Required In Any Patient Ceiling Lift. 2.7.1.9. Requires Emergency Stop Function 2.7.1.10. Requires Emergency Lowering Capability 2.7.1.11. Requires Manual Lowering Capability 2.7.1.12. Rails Must Provide Continuous In-rail Charging 2.7.1.13. Lifts Must Be Safe For Bathroom Use 2.7.1.14. Requires Integrated Compatible Scale Module 2.7.1.15. Requires Lowest Position To Reach The Floor minimum Technical Requirement 2.7.2. Bariatric Ceiling Lift 2.7.2.1. Manual Traverse 2.7.2.2. Lift Motor: 24 Volt 2.7.2.3. Lift Capacity At Least 1000 Lbs 2.7.2.4. Unit Weight Max 45 Pounds 2.7.2.5. The Patient Lift Unit Must Be Able To Collect And Report The Following Data At Each Lcd Display Unit: 2.7.2.5.1. Lifts Total Count 2.7.2.5.2. Total Number Of Load Weighing More Than 330lbs 2.7.2.5.3. Total Count Of Lifts In The Last Seven Days 2.7.2.5.4. Average Count Of Lifts Per Week 2.7.2.6. The Patient Lift Unit Must Also Be Able To Report The Following Additional Safety / Maintenance Data Via Usb Connection To A Laptop / Tablet: 2.7.2.6.1. Lifting Strap Life 2.7.2.6.2. Critically Low Battery Life Count 2.7.2.6.3. The Total Weightings Count 2.7.2.6.4. Total Lifting Time/hours 2.7.2.7. Software Transfer Data Must Operate With Va Existing It Infrastructure. (laptop / Tablet/cord/ Usb Connection Solution). 2.7.2.8. Wi-fi Compatibility Will Not Be Required In Any Patient Ceiling Lift. 2.7.2.9. Requires Emergency Stop Function 2.7.2.10. Requires Emergency Lowering Capability 2.7.2.11. Requires Manual Lowering Capability 2.7.2.12. Rails Must Provide Continuous In-rail Charging 2.7.2.13. Lifts Must Be Safe For Bathroom Use 2.7.2.14. Must Include Integrated Scale 2.7.2.15. Must Be Able To Reach The Floor In Its Lowest Position 2.7.3. Accessories / Supplies 2.7.3.1. Disposable Slings One Of Each Size (m, L, Xl, Bariatric, Repositioning, Limb) For Each Installed Lift. 2.7.3.2. Reusable Slings (m-8 Qty, L-8 Qty, Repositioning-22 Qty) 2.7.3.3. Tracks/rails For Each Lift 2.8.1.1.1. Phased Installation/destination Delivery Throughout The Hospital To Minimize Patient Impact. Vendor To Coordinate With Cor For Room Downtimes And Access. 2.8.1.2. Travel Cost And Time 2.8.1.3. Inspection Of Existing Rails And Correction Of Any Deficiencies 2.8.1.4. Provide Structural Support Calculations For Each Room/lift System 2.8.1.5. Ceiling Lift Installation And Certification 2.8.1.5.1. To Be Completed In Accordance With Va Installation Or Relocation Checklist For Ceiling Mounted Patient Lifts (attached) 2.8.1.6. Vendor Must Follow All Vha Infection Control Risk Assessment (icra) And Vha Pre-construction Risk Assessment (pcra) Protocols. 2.8.1.6.1. This Will Include But Will Not Be Limited To: 2.8.1.6.1.1. Hepa Filters, Hvac Isolation, Block Off/seal Air Vents, And Sticky Mats At The Entrance Of Work Site 2.8.1.6.1.2. Specific Requirements To Be Determined Post-award On A Room By Room Basis. 2.8.1.7. Vendor Is Responsible For All Incidental Drywall Repairs, Repainting Of Walls That Is Required To Install Structural Supports 2.8.1.8. Vendor Is Responsible For Running Additional Electrical Lines As Necessary. 2.8.1.9. Va Electricians Will Handle Lock Out Tag Out Procedures For Any Existing Lines. 2.8.1.10. Vendor Is Responsible For Deinstall For Existing Equipment Removal Of Existing Lift Systems, Tracks, And Etcc That Is Being Replaced On 6 Floors. 2.8.1.11. Vendor Shall Destination Deliver All Equipment And Track Equipment To The Beckley Vamc When The (1st-6th Floors) Sites Are Ready For Installation. 2.8.1.12. Vendor Is Responsible To Track And Manage Equipment Until It Is Fully Operational And Installed. 2.8.1.16. The Vendor Shall Remove All Related Shipping Debris And Packing From The Va Facility. 2.8.1.17. Vendor Delivery Shall Be Completed With Cor Approval Between 8:00 A.m. And 3:30 P.m. Monday Friday. All Federal Holidays Are Excluded. 2.8.1.18. Vendor Delivered Materials To Job In Manufacturer's Must Be In Original Sealed Containers With Po Number On The Outside Of Box. 2.8.1.19. Vendor Is Responsible For Package Damage Or Deterioration During Shipment, Handling, Storage, And Until Fully Operational Installation. 2.8.1.20. Vendor Is Responsible To Store Products In Dry Condition Inside Enclosed Facilities Until Ready For Delivery And Install. line Itemâ no. country Of Origin â  â  â  â  â  â  notes all Capability Statements And Responses Rfi Questions In This Sources Sought Notice Shall Be Submitted Via Email Stephanie.henderson3@va.gov Telephone, Fax, Or Any Other Form Of Communication Inquiries Will Not Be Reviewed Or Accepted In Response To This Sources Sought Notice. Responses To This Sources Sought Notice Must Be Received No Later Than 1/28/25 At 1:00 P.m. (eastern Standard Time). This Sources Sought Notice Is To Assist The Va In Determines Sources Only. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It May Or May Not Be Announced At A Later Date, And All Interested Parties Shall Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought Notice. disclaimer this Request For Information (rfi) Is Issued For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked A Proprietary Will Be Handled Accordingly In Accordance With (iaw) Federal Acquisition Regulation (far) 15.201(e), Rfis May Be Used When The Government Does Not Presently Intend To Award A Contract, But Wants To Obtain Price, Delivery, Other Market Information, Or Capabilities For Planning Purposes. Responses To These Notices Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Incurred Associated With Responding To This Rfi. end Of Notice