Scrap Tenders

Description: Lot No.ws/mn/57/01/24-25/bg/cond./8w/coaches. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/coach With N.f Attachment Without Contents If Any. 1) Nr X01204 Nmg 2) Se 038236 Wgscn 3) Nr 044724 Gslrd 4) Nr 034358 Wgscn 5) Nc 044778 Wgscn , Nb: [1]. (a) All Coaches Are To Be Sold Without 20 Nos. Wheel Sets Complete Alongwith Roller Bearing ,06 Nos.serviceable Bogie Against Srl No.(01-02 Nos. Both Bogies Are Serviceable), (03-02 Nos. Both Bogies Are Serviceable), (04-01no. End-1) And (05-01 No. End-2) With Complete Fittings, Biotanks And Other Excluded Fittings As Per Latest Excluded Fitting List No.m2/c-19/excluded Fittings/coach/1271 Dt.13.09.2018. (b) The Coaches Are To Be Sold With 04 Nos.unserviceable Bogies Without Excluded Fittings. Against Srl No: 2 - 02 Nos. Srl 4- 01no. Srl 5- 01 No. Nb[2]: Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Bogie, If Any, Are To Be Handed Over By The Purchaser At The Specified Location For Which The Purchaser Have To Arrange Labour/tools/ Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Specified Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labours And Hand Over The Same To: -(i) Sse 27-28, Bogies, Coil Spring, Screw Coupling, Buffer Sets Etc. (ii) Sse-19,wheel Sets. (iii) Sse-30, Dv, Aux Reservoir, Cr, Common Pipe Bracket, Alu. Water Tank, Bmbc, Etc. (iv) Sse-25, Bio Toilet. (v) Sse-51 Battery, Fan, Alternator, Etc. (vi) Sse-55 (all Ac Items) To Hand Over To Concern Stock Holder With Clear Acknowledgement. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. B). Delivery Witnessing Official Will Ensure That Such Nil Value Items Has Been Cleared By Purchaser Before Taking Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register "purchaser Clear All Nil Value Items Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site (c) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolley/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. Nb:-[3] Serviceable 06 Nos. Of Bogies With Complete Fittings And 20 Nos. Wheel Sets Complete Along With Roller Bearing, Biotanks And Other Excluded Fittings Are To Be Handed Over By The Purchaser At Specified Location As Advised By Concerned Sse At Kgp/ws Nb: (4) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb:[5] Delivery Will Be Given In Numbers. Nb:[6] The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property Is Near Vicinity Of The Cutting Spot Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery. And The Purchaser Will Be Solely Responsible Of Any Loss Applied ( Railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Of The Coaches, Transportation Loading And Unloading Of All Excluded Fittings Of The Coaches . Including Wheel Sets And Trolleys.

Details: Description Item No. Item Name Item Description Quantity Unit Measure Abc Per Item 1 Clamp Digital Clampmeter 1000 Amps True Rms Specs: 1000/600 Amps Ac/dc Current Measurement, 600 V Ac/dc Voltage Measurement, 4000 Ohms Resistance Measurement 1 Piece ₱24,165.00 2 Cutter Ppr Pipe Cutter 2 Piece ₱1,300.00 3 Cutter Glass, Diamond 1 Piece ₱2,500.00 4 Drill Electric Impact Drill Set (gsb 13 Re) 650 Watts, Heavy Duty 3 Piece ₱23,250.00 5 Flashlight Heavy Duty, Multifunction 1 Piece ₱1,800.00 6 Fusion Machine 1000w Ppr Heater, With Mould Size 20-32, Pipe Fusion Welding Machine 1 Set ₱5,000.00 7 Gauge Tool Gauge Manifold 1 Piece ₱2,215.00 8 Grasscutter 2 Unit ₱36,800.00 9 Grinder Electric Angle (dw810) 4 Dia. 710 Watts Heavy Duty" 1 Piece ₱5,750.00 10 Hedge Trimmer Cordless Electric, At Least 20v 1 Piece ₱10,000.00 11 Hot Stick Telescopic Fiberglass Electrical, (specs: Triangular Shape Rod, Length: 12 Meters Max. Extended Height, For High Voltage Line) 1 Piece ₱27,500.00 12 Jack Hydraulic Pallet Truck, 3 Ton Capacity, Hand Pallet 1 Piece ₱17,850.00 13 Ladder Aluminum, 2 X 8 Steps 1 Piece ₱5,000.00 14 Rasp Tool 8 Inches 1 Piece ₱675.00 15 Riveter Hand 2 Piece ₱3,000.00 16 Saw Jigsaw 400w, Heavy Duty 1 Set ₱3,000.00 17 Scraper Stainless Steel Scraper 1 Piece ₱250.00 18 Scraper Putty Trowel, 5 Inch Carbon Steel Blade (paleta) 1 Piece ₱420.00 19 Screw Driver Star, 30 Cm, Heavy Duty 1 Piece ₱500.00 20 Screw Driver 6-pc/set 1 Set ₱1,150.00 21 Screw Driver Flat, (30 Cm), Heavy Duty 2 Piece ₱1,000.00 22 Screw Tool Screw Extractor Remover Set (with Drill Bits Tool Kit 3-22mm Set) 1 Set ₱350.00 23 Soldering Iron Adjustable Heat Temp. Set 1 Unit ₱4,000.00 24 Staple Gun 4-8mm Stainless Steel Staple Gun Tacker Set, Heavy Duty 1 Piece ₱2,100.00 25 Steel Tape 5 Meters, Measuring Tool, Heavy Duty 1 Piece ₱1,000.00 26 Threader Ppr Pipe Threader Tool Set 1 Piece ₱2,500.00 27 Tool Belt Electrician's Padded Tool Belt/pouch 2 Piece ₱3,000.00 28 Wrench Adjustable, 12 Heavy Duty Satin Finish" 1 Piece ₱1,150.00 29 Wrench Adjustable, 6 Heavy Duty Satin Finish" 1 Copy ₱850.00 30 Wrench Adjustable, 16" 1 Piece ₱800.00 31 Wrench Open Wrench Set (size 10, 12, 14, 16, 18, 20, 22, 24) 1 Set ₱2,500.00 ---nothing Follows--- ---abc Php 191,375.00---

Description: CATEGORY: NRV ASSY 11by2 inch BSP or NRV ASSY 11by2 inch BSP , CONNECTING ROD and CRANKSHAFT AASY or CON ROD and C SHAFT ASSY SP 10 or 20 , OBS GASKET HP20 , PISTON ASSY 100 SS T or PISTON and GP DIA100 SS07 10 , OBS PISTON RINGS DIA 100 , OBS PISTON RING DIA 60 , PISTON ASSY DIA60 TS or PISTON and GP DIA60 TS07 10 , FLAT VALVE DIA 60 CYL HP07 10 , IND OIL LEVEL 1 1 4 BSP or IND OILLEVEL 1 1by4 inch BSP , VALVE FINGER TYPE DIA60 CYL , GASKET BIG CYL TO DN DIA 100 , V BELT C-85 or BELT V C85 , PRESSURE TRANSMITER 0-50 BAR or PSW ASSY 8-32 BAR , A C ASSY SP10 12 15 20 or SILENCER ASSY 3by4 inch BSP HP03 05 , I C PIPE 1 ST SP 10 12 15 20 , I C PIPE 2 ST SP 10 12 15 20 , PISTON and GP DIA 127 P or PISTON and GP DIA 127 SP10 12 15 , CYL DIA50 SP M C SP SERIES , DUV ASSY 3 4 BSP or DUV ASSY 3by4 inch BSP , BEARING or BEARING 6310 , SOUV ASSY 220V G114 NO 312 or SOUV ASSY 220V G1by4 inch NO 3 2 , SV ASSY 3 8 BSP or SV ASSY 3by8 inch BSP , ELEMENT FILTER B TYPE , PISTON ASSLY HP DIA 50 or PISTON and GP DIA50 TS02 03 , OBS DEL UL VALVE 3 4 BSP or OBS DEL UL VALVE 3by4 inch BSP , GASKET VALVE FLAT TO 50 HEAD , GASKET FLYENDTS 10 , AUTO DRAIN VALVE , O RING SS 15TS or O RING SS 15 TS12 15 , RING O 10X2 DUV , V BELT or BELT C98 , DRAIN VALVE or DRAINAGE VALVE 037680 , FLEXIBLE GEAR RIM FOR COUPLING or FLEXIBLE COUPLING ELEMENT , PRESSURE GUAGE , FLEXIBLE GEAR RIM E COUPLING or FLEXIBLE COUPLING ELEMENT , O RING IST STAGE or REED VALVE , CYLINDER FOOT PACKING or GASKET CYLINDER FOOT PACKING , DRIVE BELT or V BELT , PRESSURE SWITCH , SOLENOID VALVE or DRAINAGE VALVE 037680 , N-RING or NOSE RING , OIL SCRAPER RING or SLOTTED OIL CONTROL RING , LAMELLAR VALVE or REED VALVE , RECTANGULAR RING or , G-RING or DOUBLE BEVELED OIL CONTROL RING , NON RETURN VALVE , AIR FILTER , FILXIBLE GEAR RIM or FLEXIBLE COUPLING ELEMENT , CYLINDER FOOT PACKING 1ST STAGE or GASKET CYLINDER FOOT GASKET , CYLINDER FOOT PACKING 2ST STAGE or GASKET CYLINDER FOOT GASKET

Details: Title: Etablering Af Stålledning Ved Frøslev-terkelsbøl description: Biogasproduktionen Fra Biogasanlæg I Sønderjylland Kan I Sommerhalvåret Ikke Afsættes I Det Lokale Distributionsnet Eller Optages I Det Tilknyttede Stålsystem. Derfor Skal Der Etableres En Ny Stålledning Til Transportere Af Overskydende Biogas Fra Frøslev Til Terkelsbøl.anlæg Af Den Nye Stålledning Medfører At Stålledningerne 432 Fremadrettet Fysisk Vil Være Forbundet Med Stålledningerne 429.arbejdets Omfanganlægsarbejdet Omfatter Udførelse Af Ca. 17.700 Meter (rørgrav Og Styrede Underboringer) I Primært Markareal, Men Også Større Fredskov- Og Plantageområder, Vådområder (§3) Samt Et Natura 2000 Vandløb, Vil Blive Berørt Af Anlægsarbejdet.svejsning Af Ca. 17.700 Meter Ø168,3 Mm Stålrørca. 3.553 Meter Underboringanboring Af Eksisterende Stålledning (tdw)* I Frøslev Plantage Samt Konstruktion Af Ventil- Og Scraperarrangementlinjeventil (ca. Halvvejs På Strækningen) Samt Konstruktion Af Ventilgruppetilslutning Til Eksisterende Ventilarrangement I Terkelsbøl Ved Energinets Mr Station Samt Konstruktion Af Ventil- Og Scraper Arrangement.*tdw Er Bygherreleverance

Details: Description Repainting Of The Handrails Of The Stage At Hidalgo Building Project Overview: This Project Involves The Repainting Of The Handrails Of The Stage At The Hidalgo Building To Enhance Durability, Aesthetics, And Protection Against Rust And Weathering. The Work Will Include Surface Preparation, Application Of Primer, And Finishing With High-quality Paint. Scope Of Work: 1. Site Preparation • Inspection Of The Existing Condition Of The Handrails • Removal Of Any Obstructions Or Loose Attachments Around The Work Area • Protection Of Surrounding Surfaces From Paint Spills And Overspray 2. Surface Preparation • Sanding And Scraping Off Old Paint, Rust, And Debris • Cleaning The Surface With Appropriate Solutions To Remove Dirt And Grease • Application Of Rust Converter Or Metal Primer If Needed For Proper Adhesion 3. Priming And Painting • Application Of Anti-corrosion Primer For Metal Surfaces • Painting With Weather-resistant And High-quality Enamel Or Metal Paint • Ensuring Even Application And Proper Drying Time Between Coats • Applying A Second Coat For Durability And Uniform Finish 4. Final Inspection And Cleanup • Checking For Any Uneven Coatings Or Missed Areas • Touch-up Painting Where Necessary • Cleaning Up The Work Area And Disposing Of Materials Properly Expected Outcomes: • Improved Appearance And Durability Of The Stage Handrails • Rust And Weather-resistant Coating For Long-term Protection • Smooth And Professional Finish Enhancing The Overall Look Of The Stage

Description: CATEGORY: O-ring part no 42626002 , O-ring Part Number 479521 , O- ring Part Number 43452000 , back-up ring Part Number 66159005 , O-ring Part Number 452049 , back-up ring Part Number 700570 , guide ring Part Number 700562 , gasket Part Number 700566 , tandem packing Part Number 700565 , tandem packing Part Number 700563 , O-ring Part Number 43490004 , back-up ring Part Number 700571 , O-ring Part Number 253348001 , piston rod Part Number 710316 , set connecting plate Part Number 700892 , magnetic switch Part Number 527853 , displacement sensor Part Number 561782 , Piston Cup NBR Part Number 407253 , Ring Part Number 410378 , Ring Part Number 410652 , tie rod l3900 Part Number 623907 , tie rod l3000 Part Number 623906 , Wear parts s delivery s Part Number 681845 , Wear parts s suction s Part Number 681828 , sliding ring seal set Part Number 476934 , guide ring Part Number 65976001 , Lip seal ring Part Number 681595 , O-Ring Part Number 580586 , scraper ring Part Number 681599 , tandem packing Part Number 681603 , O-Ring Part Number 285614004 , tandem packing Part Number 476926 , back-up ring Part Number 681609 , O-Ring Part Number 43434002 , back-up ring Part Number 263424009 , O-Ring Part Number 62898001 , PTSM back-up ring Part Number 62899000 , hex nut self locking Part Number 34109003 , O-ring Part Number 226967008 , piston rod Part Number 622311 , hyd cyl Cpl Part Number 681598 , O-Ring Part Number 235582005 , pistonrod Part Number 622077 , hyd cyl Cpl Part Number 681664 , Magnetic switch cpl Part Number 270321001 , Pump element Part Number 239227007 , Safety valve Part Number 67995006 , Induktive switch Part Number 4419461 , filling elbow Part Number 663081 , o-ring Part Number 296657005 , pressure sensor Part Number 420220 , filter insert Part Number 257225007 , filter insert Part Number 223192009 , vacuum switch Part Number 429658 , suction filter Part Number 416341 , suction filter Part Number 294073005 , pressure switch Part Number 465436 , thermo sensor Part Number 453554 , fill level sensor Part Number 447762 , filter insert Part Number 279990006 , breathing filter Part Number 662781 , breathing filter Part Number 692188 , Electronic Fuse Part Number 561386 , E-Stop Unit Part Number 672092 , E- Stop Contact Part Number 672094 , Opto Coupler Part Number 527148 , CPU 1500 Part Number 595483 , DI card Part Number 595484 , DO card Part Number 595485 , AI card Part Number 595486 , Control Amplifier Part Number 725970 , Operator panel Part Number 731857 , rack for delivery cylinders Part Number 604584 , Hy tightening tool Part Number 561697 , pulling tool for tie rods Part Number 561739 , grease gun Part Number 210075003

Description: CATEGORY: STRAIGHT COUPLING M24 , STRAIGHT COUPLING M52 , Banjo Coupling 1 by 2inch BSP X M24 Heavy , Banjo Coupling 1 by 4 inch BSP X M18 Heavy , Banjo Coupling 1 by 2inch BSP X M24 Light , Banjo Coupling 1 by 4 inch BSP X M18 Light , SWIVEL NUT BRANCH TEE , MINIMUS COUPLING 1by 4 inch BY M16X2P , Straight Coupling 1.5 Bsp X M52by2P. SS3 , Swivel Straight Connector 2 3by8inch X M18 , Swivel Straight Connector 1 1point5inch X M52 , Inline check valve RV-16-01by H , Inline check valve RV-10- 01byH , GATE VALVE , MALE FEMALE ADAPTOR , Connector 6 3 by 8 inch BSP Male X M18 , Connector 3 1by4inch BSP x M18 , Connector 1 1by2inch by M24 , MAIL STUD COUPLING 3by8inch BY M18 FOR 12S , PLUG 1by2inch BSP , PLUG 1by4 inch BSP , Pressure line filter Element 0160 D 010 , Return line filter Element 0160 R 010 B , O-RING FOR 16 OD PIPE WELD NIPPLE M24 , O-RING FOR 10 OD PIPE WELD NIPPLE , Minimus Hose 1.5mtrs WP 250Bar , CABLE DRAG PSDU , CABLE DRAG ACU , VALVE , Carriage for LM rails , CUSTOMIZED M24 ELBOW-BRASS , HOSE ASSEMBLY , Cold plate connector 3by8inch BSP x M24 , Banjo Elbow Male 3by8inch BSP X M24 Light , MALE STUD COUPLING 3by8inch BSP X M24 , M18 BY M24 STRAIGHT CONNECTOR , M18 BY M24 ELBOW BRASS , CLIP ON GASKET EMI , BONDED SEAL 3 , BONDED SEAL 5 , Palm couplings - Emergency , Palm couplings - Service , 12mm Pneumatic hose - 4 Meter , Wheel nut , Wheel Stud , Brake Chamber , Spring Brake Chamber , 12mm Hose connector , Air bellow , Tail lamp , Tail Bulb , Convoy lamp , Vertical roller wheel , Horizontal roller wheel , Bottom roller wheel , Tarpaulin stitching kit Needle, thread etc , GEARBOX 1 , AC-DC Converter Fixed 144W 230VAC , FUSE HOLDER FOR 32 A 16 NO , Single- phase Power Line Filter , 4x20A AC MCB With Auxiliary Contact , 9 pin Male Circular Plug HD , NC type Air flow switch , SINGLE PLUNGER LIMIT SWITCH ROLLER TYPE , VENTILATION FAN , AC Fan All Metal 530by 600 RPM 225 x 225 , Smoke Detector Sensitivity 2.66 plus minus 1.11pct , Rain gasket for door , Scraper , gasket , EMI gasket for door , EMI EMC box gasket , EMI EMC gasket , Rain EMI gasket , Adaptor for pressure gauge , Elevation actuator - grase plug 1by8inch , Bonded seal 1 , Bonded seal 2 , Bonded seal 4 , Bonded seal 6 , Bonded seal 7 , Bonded seal 8 , Swivel elbow M18 Dia 10 Male x M 18 Dia , 5.5 KW AC Drive controller , C106 CPU CARD

Details: Description Gloss Latex Paint-ivory 19 Pails 68,400.00 Gloss Latex Paint-temptation 6 Gals 5,520.00 Gloss Latex Paint-white 8 Gals 7,360.00 Paint Brush #2 6 Pcs 390.00 Paint Bursh #4 6 Pcs 720.00 Paint Tray 6 Pcs 840.00 Roller Brush #9 6 Pcs 660.00 Baby Roller Brush 6 Pcs 540.00 Body Filler 2 Gals 2,400.00 Paint Pallet 6 Pairs 360.00 Paint Scraper#4 6 Pcs 720.00 Sand Paper @ 100 40 Shts 1,200.00 Skim Coat 6 Bags 3,300.00 Acrylic Primer 3 Gals 3,000.00 Latex Tinting Color-thalo Blue 6 Pcs 540.00 Latex Tinting Color-lamp Black 2 Pcs 180.00 Latex Tinting Color-thalo Green 2 Pcs 180.00 Latex Tinting Color-toluidine Red 2 Pcs 180.00 Latex Tinting Color-venetian Red 2 Pcs 180.00 Latex Tinting Color-hansa Yellow 2 Pcs 180.00 Latex Tinting Color-raw Sienna 2 Pcs 180.00 Latex Tinting Color-burnt Sienna 2 Pcs 180.00 Artist Paint Brush 1 Set 90.00 Flat Latex Paint 2 Gals 1,700.00

Details: We Are Seeking Permission To Procure The Street Cleansing Consumables Required For The Council To Provide The Newly Insourced Street Cleansing Service. The Street Cleansing Service Is Being Brought Back Inhouse Having Been Delivered By An External Contractor Since 2017. The New Service Will Commence On 1st April 2025 But We Require The Supplies To Be On Site By 24th March 2025. The Products Required Need To Meet The Following Brief: The Items Will Be Used To Deliver The Street Cleansing Service, Allowing For Merton To Be Kept Clean, Tidy And Safe For Residents And Visitors Of The Borough. Trigger Litter Pickers Are Needed As Part Of The Service, The Product Needs To Be Sturdy And Lightweight. They Also Need To Prevent Over Stretching And Bending Of Front-line Staff. Wide Broom Heads Are Needed For Clearing Large Debris, Such As Leaves, Rubble, Soil And Mud On Uneven Surfaces. Hard Broom Heads Are Needed For Clearing Large Debris Such As Leaves, Rubble, Soil And Mud On Uneven Surfaces. Flicker Brooms (for Mechanical Sweepers) Are Needed To Help Clean Small Spaces Such As Junction Boxes And Channels. The Broom Can Also Be Used To Sweep Dirt Onto A Shovel For Easy Disposal. Shovels To Be Used In Conjunction With Brushes To Help With Moving Detritus Into Barrows. Shovels Need To Be Relatively Lightweight And Strong, As Well As Producing Limited Noise And Damage When Scraping Against A Pavement. Broom Handles Are Needed That Can Fit Multiple Brush Heads, Allowing For Sustainable Repairing Of Items Such As Brushes And Shovels. Snow Shovels Will Need To Have A Wider Base Than A Normal Shovel To Help With Clearing Leaves And Snow. All Items Will Need To Be Delivered By 24th March 2025, With A View To Ordering New Supplies As And When Required Throughout The Life Of The Contract.

Details: Description Unit Qty Description Of Articles Unit Price Pc 1 Air Compressor With Airbrush Cake Decorating Pcs 10 Beater Pcs 10 Board, Chopping, 6 Color Pc 1 Boiler, Double Pcs 15 Bowl, Mixing ( 6 Pcs/set) Pcs 10 Cake Pans, Round #4, #6, #8, #10, #12, # 14 Pcs 10 Cake Stand, With Tier Pcs 4 Cake Turn Table Pcs 15 Coupler Pcs 15 Cup, Measuring (for Solid) Pcs 15 Cup, Measurintg, 250 Ml For Liquid Pcs 15 Cup, Measuring, 500 Ml For Liquid Pc 2 Cutter, Dough Pcs 8 Cutter, Pie Pcs 8 Flour Sifter, Hand Cranked Pcs 8 Grater Pcs 8 Knife, Kitchen Pcs 8 Knife, Pallet Pcs 8 Ladle, 3 0z Pcs 8 Loaf Pan Big Pcs 8 Loaf Pan , Medium Pcs 8 Loaf Pan, Small Pcs 8 Muffin Pan, Big Pcs 8 Muffin Pan, Medium Pcs 8 Muffin Pan, Small Pcs 8 Pie Pan, 10 Inches Diameter Pcs 8 Pie Pan, #6, #8, #10 Pcs 8 Pillars, Cake Pcs 30 Piping Bag Pcs 5 Rectangular Pan, 1x8 Pcs 7 Rolling Pins Pcs 7 Rubber Scraper Pcs 7 Sauce Pan Pcs 7 Sheet Pan Pcs 25 Spoon Measuring Pcs 8 Spoon, Wooden Pcs 8 Strainer Pcs 25 Tip Decorating Pcs 8 Weighing Scale, 10 Kgs Pcs 8 Weighing Scale, 5 Kgs, Digital Pcs 8 Wire Whisk, Medium *****nothing Follows*****