Scrap Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16879 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/goc. Custodian- Sse/diesel Shed/goc.re-claimable Items - [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Msu Tube, Axle Boxes With Bearings]- 6 Sets.s.1539 No.738158 Dt.29.11.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 14144 With Available Items Without Traction Motors [06 Nos] [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636429 Dt.20.08.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Erode)

Description: Abondoned Rly. Qtr No. 34/e At Matunga Road Station , Under Sse Works Mru , Units 36, Lot Comprises Of 1] Released Wooden Scrap Such As Wooden Xpm Jali, Wooden Rack, Frame With Jali, Qty: 11.02 Cum, 2]released Wooden Windows , 25.72 Sqm, 3] Released Wooden Doors , Qty: 237.60 Sqm, , 4] Brick Masonary , Qty: 857.52 Cum, 5] Rcc Masonary Of Walls Etc, Qty: 130.80 Cum, 6] Released Reinforcement Steel , Qty: 10267.8 Kgs., 7] Realesed Structural Steel Such As Window Rods, L Section Of Stair Case Etc 150x115x15mm, Ms Plates, Railings, Sq. Bars, Whether Shed, Weather Sheet, Qty: 7266.34 Kgs., 8] Ms Pipe Dia 60 Mm, Qty: 5.55 Rm , 9] Structural Rails Released Of Beams Etc, 90 R Etc, Qty: 44003.304 Kgs. , Mode Of Delivery By Lot, To Be Sale On As And Where Is Basis, Note: 1] Purchasers Are Requested To See Site /qtrs Before Bidding. 2] Whole Strucures To Be Dismantled By The Purchaser And After Clearing/dispossing Off All Debris From Railway Permises , Purchaser Will Be Allowed To Take Delivery Of His Material. 3] The Items And Material Lying Outside The Building Boundary Line Are Not A Part Of A Auction .4] Electric Wires/panels And Other Materials Lying Inside The Building Shall Be Removed And Handed Over To Custodian By Purchaser During Dismantling Structure. 5] While Dismantling The Structure Purchaser Will Take Care Such That Adjacent Buiding, Railway Tracks , Assets , Platform Shed, Common Walls And Other Common Members Should Not Be Damaged/disturb And In Case Of Any Damage Same Asset To Be Rectify By Purchaser. 6] The Structure Above Ground Level Is To Be Considered For Auction. Excavation Below Ground Level Is Not Allowed. 7] All Safety Majors (pvc Safty Net, Scaffolding Net Etc ) Should Be Taken By Purchaser To Avoid Any Unusuall At Works Site. 8] Barricading/ Protection Shall Be Provided By Purchaser To Avoid Any Accident .9] If Any Accident /unusuall Occurs At Work , Purchaser Alone Will Bare Full Responsibility And Railway Officials Will Not Be Responsible For Such Unusuall Happening. 10] During Dismantling Work Safety Of Running Tracks, Coaches, Other Railway Property & Railway Staff As Well Has His Own Labour Should Be Ensured By Purchaser And Dismantling Work Shall Be Carried Out With Full Safety Measures Of Working Staff And Others, 11] Dismantling Will Be Supervised By Sse W-mru , 12] Teak Wood Is Used In All Wooden Doors, Window Members, Purlin Rafter, Reiling, Stairs Flank Etc 13] Fdp Allowed Is 80 Days

Description: Abandoned Railway Quarters Type I Bearing Nos. 295 - 04 Units, 298 - 04 Units, 299 - 04 Units, 365 - 04 Units Total Type 1 Units - 16 Units, Railway Quarters Type Ii Bearing Nos. - 415 - 08 Units, 34/a - 01 Unit, 37 - 02 Units Total Type Ii Units - 11 Units Location - Bvp, Total - 27 Units, In Lot Abandoned Condemned Consisting Of Released Wooden Door With Chowkhat Off Sizes Approx - 125 Nos, Released Wooden Window With Chowkhat & Ms Rod Off Sizes Approx. - 61 Nos., Released Wooden Jaffry Off Sizes Approx. - 17 Nos., Released Wooden Off Sizes Approx. - 10.4 Cum., Released Rails Off Sizes Approx - 656.28 Rmt., Released Masonary Off Sizes Approx - 937.5 Cum., Released Steel Door With Frame Off Sizes Approx - 27 Nos., Released M Tiles Off Sizes Approx. - 2160 Nos., Released Angle Off Sizes Approx. - 515 Meter, Released I Beam Off Sizes Approx. - 153 Meter, Released Ms Plat Off Sizes Approx. - 04 Nos., Released Ms Flate Off Sizes Approx. - 2813 Rmt., Released C Channel Off Sizes Approx. - 154 Meter, Released Pipes Off Sizes Approx. - 35 Meter, Released Rcc Slab Off Sizes Approx. - 33.53 Cum., Released Ms Steel Gate Off Sizes Approx. - 25 Kgs., Released Gi Sheet Off Sizes Approx. - 25 Sqm., Released Ms Grill Off Sizes Approx. - 02 Nos., Released Ms Scrap Off Sizes Approx. - 1208 Kgs. Available With Custodian Sse (w) Bvp , Location - Bvp, Mode Of Delivery By Lot Basis, Loading By Purchaser. Note: 1. Dismantling Is Permitted Up To Ground Level Only. Below Ground Level Does Not Be Permitted. Cutting Is Permitted. Due Care Is To Be Taken By The Bidder/purchaser To Avoid Unwanted Mishapes At Work Spots. They Should Ensure To Keep A Safety Banner Around The Work Spot Till It Is Complete Since The Locations Are Surrounded With Residential Blocks. 2. After Removing/ Clearing The Rcc/ Brick Machonary Rubbish From The Spot Only, The Delivery Of Wood/ Iron Material Will Be Affected. 3. Contractor Should Take Care Of Any Cable While Dismantling And Digging Damage To Railways Shall Be Recovered As Per Extent Rules. 4. Part Delivery Is Not Allowed At The Same Location. Free Delivery Period 50 Days

Description: CATEGORY: E11954003000O Ring Dia 54.5 , E251103017701Seal Crank Shaft Rear , E251103017702Seal Crank Shaft Front , E251120016301Coolant Temperature Sensor , E251120016302Temperature Sensor joint , E251103013101Main Bearing Upper , E251103013102Main Bearing Lower , E251103013103Thrust Washer , E251103025101Balancer Upper Bearing Shaft , E11012150321Cylinder Head Bolt , E251105033101Cam shaft Bearing 2nd Cylinder , E251103043101Conrod Bearing Bottom , E251103043102Conrod Bearing Top , E251103056603Top Ring Diesel 2nd Cylinder , E251103056604Middle Ring , E251103056605Oil Control Ring Scraper , E251114015301Gasket Exhaust Manifold , E251214015305Gasket Turbocharger Inlet , G254014015301Gasket Turbocharger outlet , E251109025301Gasket Inlet Manifold , E251120013801Thermostat Assy , G258007036803Pipe Fuel Return Assy , E251118038205Filter Oil , G258007038201Fuel Filter , E251118035301Gasket Oil Pan , E251107016912Fuel Return Pipe , E251107019903Fuel Injector Pump , G258007020200Fuel Feed Pump Assy , E251118044901Cam Sensor , E251101035301Gasket Cyl. Head , E251101033702Cam Cup , E251101033703Cam Cup Thrust , E251105047701Valve Stem oil Seal , E11992003000O Ring Cylinder Liner , E251107019904Injector Diesel , E251107019201Washer Injector 02 MM , E251214013802Turbo Charger , G258009009503Air Filter , G258009009502Vacum Indicator , G2580150700ERWiring Harness With EMS Senor , E251101013702Cylinder Liner STD , E251107019202Washer Injector Clamp , NKHeater Plug , E251118047702Injector Seal , 740-12-IT-2ERelay , 740-12- IA-25-AERelay , SMC-101-CRDegital Display E Smart , 28277992DCM 2.5 Delphi

Description: Abandoned Railway Quarters Type I Bearing Nos. 473 - 01 Unit, 472 - 02 Units, 322 - 03 Units, 304 - 06 Units, 317 - 04 Units Location - Bvp, 33/l - 01 Unit Location - Bvc, Total Type 1 Units - 17 Units, Railway Quarters Type Ii Bearing Nos. 474 - 02 Units, 494 - 02 Units, 72/a-b - 02 Units Location - Bvp, 348 - 02 Units, 350 - 02 Units Location Sinha Colony Bvp, 27/t - 02 Units Location - Bvc, Total Type Ii Units - 12 Units, Total - 29 Units In Lot Abandoned Condemned Consisting Of Released Ac Sheets Off Sizes - 914.22 Sq Mtr Approx., Released Wooden Doors Off Sizes With Chowkhat U/s - 140 Nos, Released Wooden Windows Off Sizes With Chowkhat & Ms Rod U/s - 63 Nos, Released Rails 30 Lbs, 41 1/4, 50 R, 60 R Off Sizes - 1010.55 Rmt, Released Wood Approx - 10.86 Cum, Released Wooden Jaffery U/s Off Sizes - 20 Nos, Rr Masonary Approx - 162.6 Cum, Released Brick Masonary Approx - 709.19 Cum, Released Mangalore Tiles - 540 Nos, Released Steel Door With Frame Off Sizes - 26 Nos, Released Gi Sheets - 148.2 Sqm, Released Rcc Slab Approx. - 237.2 Cum, Released Xpm Off Sizes - 18 Nos, Released Gi Pipe Off Sizes - 18 M Approx, Released Ms Scrap - 193 Kgs, Released Ms Flat Off Sizes - 48.6 Mtr Approx, Released Angle Off Sizes - 98.8 M, Released Tie Bar Approx - 460.03 Rmt. Available With Custodian Sse (w)bvp , Location - Bvp, Sinha Colony Bvp, Bvc, Mode Of Delivery By Lot Basis, Loading By Purchaser. Note: 1. Dismantling Is Permitted Up To Ground Level Only. Below Ground Level Does Not Be Permitted. Cutting Is Permitted. Due Care Is To Be Taken By The Bidder/purchaser To Avoid Unwanted Mishapes At Work Spots. They Should Ensure To Keep A Safety Banner Around The Work Spot Till It Is Complete Since The Locations Are Surrounded With Residential Blocks. 2. After Removing/ Clearing The Rcc/ Brick Machonary Rubbish From The Spot Only, The Delivery Of Wood/ Iron Material Will Be Affected. 3. Contractor Should Take Care Of Any Cable While Dismantling And Digging Damage To Railways Shall Be Recovered As Per Extent Rules. 4. Part Delivery Is Not Allowed At The Same Location. Free Delivery Period 50 Days

Description: * Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Please Supply And Deliver Electric Plastic Shredder Grinder 2.2kw Specifications: ?versatile Material Shredder?this Plastic Crusher Is An Efficient Tool For Crushing And Recycling A Wide Range Of Materials Including Pc,pvc ,abs,pet,eps,pu,hdpe,wood,nylon,wire,corn,walnuts,paper Boxes,mineral Water Bottles,and Other Soft And Hard Plastics. - It E Ffectively Reduces Thick Materials Into Uniform Granules For Easy Reuse,enabling The Recovery Of Significant Amounts Of Scrap Material. ? ?high Efficiency <(>&<)> High Capacity?equipped With A 2.2kw Pure Copper Motor, It Boasts A Capacity Of 50-100kg/h. The Machine Features A Feed Port Dimension Of 110x180mm And A Mesh Size Of 6mm,which Facilitates Quick And Efficient Processing. - The Use Of High-quality Steel Knives With Extra Sharp Blades Ensures Materials Are Crushed With Ease And Speed. ? ?high-quality Construction?high-intensity Steel Screws Secure The Knife Leaves And Seats, Providing Strong Bearing Capacity. As A Heavy-duty Crusher Machine, It Remains Stable Even When Processing Hard Materials, Thanks To Its All-copper Motor That Enables Prolonged Continuous Operation. ? ?low Noise Design?the Crushing Chamber Is Sound-proof Treated On All Walls,significantly Reducing Noise Levels During Operation. - This Is Achieved Through The Use Of A Deafener, Double-layer Steel Plates, And Thickened Double-layer Boards, Ensuring A Quieter Working Environment. ? ?user-friendly <(>&<)> Easy Maintenance?the Drawer Is Enlarged And Extended To Offering More Storage And Convenience In Material Retrieval. The Pulley Design Allows For 360-degree Arbitrary Rotation. - The Feed Hopper, Crushing Knife, And Filter Are Easily Disassembled For Thorough Cleaning, While A Thickened Baffle Plate Prevents Material Fly-off During Operation. This Plastic Crusher Is An Efficient Machine Designed For Crushing And Recycling A Wide Range Of Materials Including Pc, Pvc, Abs, Pet, Eps, Pu, Hdpe, Nylon, Wire, Corn, Walnuts, Paper Boxes, Mineral Water Bottles, And Other Soft And Hard Plastic Materials. It Is Capable Of Pulverizing Thick Materials Into Uniform Granules For Easy Reuse, Helping To Reclaim A Substantial Amount Of Scrap. Custom Screens Are Available To Suit Specific Requirements. Br The Machine Is Constructed With Sound-proof Treatment On All Walls Of The Crushing Chamber, Ensuring Extra-low Noise Operation. It Utilizes A Deafener And Is Built With Double-layer Steel Plates And Thickened Double Layer Boards, Resulting In A Double Mute Effect And Low Noise Level. The Bunker, Main Body, And Screen Can Be Easily Dismounted For Cleaning. Br Equipped With A 2.2kw Pure Copper Motor, The Crusher Boasts A Capacity Of 100-150kg/h. The Feed Port Dimensions Are 110 Mm X 180 Mm. It Uses High-quality Steel Knives With Sharper Blades That Facilitate Easier Crushing And Significantly Improve Crushing Speed. The Machine Features A Widened Duckbill Shape And A Larger Feed Port, Allowing For Faster Material Input And Processing. Br High-intensity Steel Screws Are Used To Fasten The Knife Leaf And Knife Seat, Providing Strong Bearing Capacity. As A Heavy-duty Crusher Machine, It Maintains Stable Operation Even When Processing Hard Materials. The All-copper Motor Enables Continuous, Long-term Operation. Br 1. The Drawer Is Enlarged And Extended By 20cm Compared To The Body, Offering More Storage And Convenience For Material Collection. Br 2. The Crusher Is Designed With A Pulley System And Universal Wheels For 360 Degrees Of Rotation, Making It Easy And Quick To Move To The Desired Location. Br 3. The Feed Hopper, Crushing Knife, And Filter Are Easily Disassembled For Thorough Cleaning. Br 4. A Thickened Baffle Plate Is Adopted To Effectively Prevent Material From Flying Off During The Crushing Process. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Technical Datasheets Can Be Uploaded/ Attached To The Rfq

Details: Public Services And Procurement Canada, On Behalf Of Canmetenergy Devon Ce-d Has A Requirement To Procure One (1) 600mhz Nuclear Magnetic Resonance Spectrometer (nmr) For The Analysis Of Solution Samples. The System Must Include All Instrument Components, Manuals, Instruments Peripherals, Operating Software, Pre-installation Check Lists, Modules, Accessories, Consumables, Installation And Operator Training, All Electrical Power Cables, Connecting Cables And Any Other Connection Type Cables And Tubing’s Required To Operate The Whole System As One Fully Automated System. Furthermore, The Current Instrument Magnet Must Be De-energized For Scrap. The 600mhz Nmr System Must Be Supplied, Installed And Fully Operational By March 31, 2025. The Shipment Must Be Packaged And Secured On A Platform Such As A Pallet Or Platform That Can Be Lifted With A Fork Truck Or Pallet Jack. No Loading Dock Is Available. A Bid Must Comply With The Requirements Of The Solicitation Of Offers And Meet The Mandatory Technical Evaluation Criteria. Canada Will Consider The Compliant Offer With The Lowest Evaluated Price On An Aggregate Basis For Award. Bidders May Request A Debriefing On The Results Of The Bid Solicitation. Bidders Should Make The Request To The Contracting Authority Within 15 Working Days From Receipt Of Notification That Their Bid Was Unsuccessful. Reference The Solicitation For Further Details. This Pwgsc Office Provides Procurement Services To The Public In English Or English And French. Documents May Be Submitted In Either Official Language Of Canada.

Details: Lot Db001 - Cat Ladders (2 Off), Lot Db002 - Various Valves (14 Off), Lot Db003 - Various Equipment (2 Off), Lot Db004 - Various Pipe Fittings , Lot Db005 - Various Valves (12 Off), Lot Db006 - Various Valves (6 Off), Lot Db007 - Various Valves (17 Off), Lot Db008 - Various Valves (6 Off), Lot Db009 - Various Valves (3 Off), Lot Db010 - Various Valves With Control Units (7 Off), Lot Db011 - Various Plant Equipment , Lot Db012 - Various Valves (4 Off), Lot Db013 - Various Joint Fittings (8 Off), Lot Db014 - Pump With Valves U0026 Control Unit (1 Off), Lot Db015 - Various Valves (5 Off), Lot Db016 - Various Hand Valves (15 Off), Lot Db017 - Various Valves (4 Off), Lot Db018 - Various Valves (6 Off), Lot Db019 - Various Valves (10 Off), Lot Db020 - Various Valves (18 Off), Lot Db021 - Various Equipment , Lot Db022 - Various Valves (3 Off), Lot Db023 - Various Scrap Equipment , Lot Db024 - Various Valves With Controls Units (7 Off), Lot Db025 - Various Hand Valves (21 Off),

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16457 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534322 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)