Tenders of Rail Wheel Factory

Diamond Dressing Roll.

Heavy Duty Air Cylinder

Lot Consisting Of Condemned Billet Mill Scales As Available In The Lot Area. Material Will Be Sold As Is Where Is Basis. Note : Purchaser Can Inspect The Materials Thoroughly Before E-auction. Purchaser Are Requested To Take Sufficient Safety Measures While Loading And Purchaser Should Arrange All Safety Equipment For Workers Engaged While Loading Into The Trucks. Delivery Unit : In Mt

Foot Mounted Double Reduction Gear Box

Description :slipring Induction Motor, Crane Duty, Foot Mounted Class F Insulation, 94kw/ 593rpm, 3p h, 415v, 50hz Rotor Volt375, Rotor Amp145, Full Load Current 190a. S3 Duty 40%cdf, Tefc With Extend ed Shaft On Non Driving End. The Shaft Shall Be Tapered At Driving & Non Driving End. Terminal Box Posi tion Will Be Lhs From Driving End. The Slipring To Be Provided On The Nde And Inspection Cover To Be Pr ovided On Both The Sides Ie., On Left And Right Side Of The Motor For Easy Accessibility Of Slipring. The M otor Shall Be Conforming To Is 325 And Protection Shall Be Conforming To Ip55 And Is 4691 Latest. Note: only Manufacturers/ Authorised Dealers To Quote. The Tenderer Shall Enclose Full Technical Details, Cata logue Along With The Offer. The Successful Tender Shall Submit The Drawing For Approval Before Manufa cturing. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description :"face Milling Cutter Rh For Milling Of Axle Ends. The Milling Cutter Should have 16 Pockets (15 Pockets For Milling Inserts And One Pocket For Wiper Insert) And We ight Of The Cutter Shall Be 25 Kgs Aprox. The Cutter Should Be Complete With Adjustabl e Wedges And Shims To Support The Inserts. The Cutter Should Be Capable Of Milling 10m m Material Per Pass With A Surface Finish Of 6.3ra. Milling Cutter Should Be Supplied Alo ng With The Following Spares (1) Shim -150 Nos. (2) Shim Screw -150 Nos. (3) Axial Support ( rh)-25 Nos. (4) Wedge For Inserts-25 Nos. (5) Wedge For Axial Support-25 Nos. (6) Wedge Sc rew- 150 Nos. Make: Sandvik, Kennametal, Walter Only ]

64121653 tube Assembly For Live Roll Of Cope Conveyor Consisting Of Item No:1 To 3 W ith Quantity As Indicated Against Each Item To Rwf Drg No:rwf/sk/mw-437 With Alteratio n-1. ] consignee General Stores Depot/rwf, Rwf Karnataka 146.00 Numbers

Heavy Duty Wall Fan 18 Inch/ 450 Mm With [heavy Duty Wall Fan 18 Inch/ 450 Mm With Following Specifications : 1) No Of Blades : 3 2)speed Control : 03 3) Material : Metal 4) Size Of Sweep : 450 Mm/18 Inch 5) Make: Orient, Crompton, Almonard, Bajaj, Havells, Atomberg, Usha 6) Supplier Should Submit Oem Authorization Certificate Along With Offer 7) Warranty For Full Machine: Minimum 1 Year From Date Of Supply 8) Supplier Should Submit Manufacturer Test Certificate Along With Supply 9) Mount Type : Wall Mount 10) Minimum Air Delivery : 150 M3/h 11) Noise Level : Maximum 70 Db 12) Maximum Power Consumption : 100 W 13) Rated Frequency : 50 Hz 14 ) Rated Voltage :230 V, 1-ph, Ac]

Description :"chip Conveyor Chain Assembly 6"(inches)pitch Hinged Steel Belt Assembly Wi th 533 Mm Width Hinge Link With Plate.(533w X152.4p),number Of Cleats At Every 4th Pitch .chips Carrying Capacity-4200kgs/hour(dry Application) As Per Drawing No,715061610280. reputed Chip Conveyor Manufacturer Are Only Eligiible To Quote Along With The Purcha se Order Of Having Supplied Similar Items To Govt. Organizations, Psu's To Be Submitted while Quoting. 1. Warranty Period: Warranty Of 24 Months From The Date Of Delivery Or 18 Months Fr om Date Of Fitment Or Use Whichever Is Early. 2. Material Test Certificate (mtc) From Nabl Accredited L aboratories For Chemical Composition / Physical Properties Should Be Submitted Along With The Materia l Supply. 3. Inspection Clause: Final Inspection Will Be Done By Consignee At Rwf. [ Warranty Period: 24 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt ed: Max 8 Lacs ] ]

Coloured Cotton Baniyan