Pumps Tenders

Details: Description Invitation To Bid For 25ei0081 - Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii, Bongabong, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii, Bongabong, Oriental Mindoro/25ei0081. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii Contract Id No. : 25ei0081 Locations : Bongabong, Oriental Mindoro Scope Of Works : Completion Of 1-unit Multti-purpose Building At Barangay Lisap, Phase Ii. This Includes Additional Concrete Works (moulding Of Window & Kitchen Countertop), Paintings, Ceiling Works, Tile Works, Septic Tank, Cistern, Water Pumping System, Electrical & Mechanical Works. Installation Of Stainless Steel Signages, Decorative Stone, Railing, Fire Escape Ladder, Plumbin Fixtures, Window, Kitchen Cabinet, Downspout, Catch Basin, Sewer Lines, Cold Water Lines, And Replacement Of Gutter Are Also Included. Approved Budget For The Contract : Php 2,970,000 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 - December 03, 2024 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On November 19, 2024 At 8:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before December 03, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 03, 2024 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description Project Reference No. 2024-11-23 Goods Invitation To Bid For The Supply, Delivery And Commissioning Of Fprdi Developed Machines For Cy 2025 1. The Forest Products Research And Development Institute (fprdi) Through The Cy 2025 National Expenditure Program (nep) Intends To Apply The Sum Of Three Million Six Hundred Fifty Thousand Pesos Only (php 3,650,000.00) Being The Approved Budget For The Contract (abc) (inclusive Of Vat) To Payments Under The Contract For Supply, Delivery And Commissioning Of Fprdi Developed Machines For Cy 2025. Item No. Particular/description Unit Qty Unit Cost (php) Total Cost (php) 1 Supply, Delivery And Commissioning Of Fprdi Developed Machines For Cy 2025 A. Fabrication Of Fprdi Wet-type Finishing Spray Booth Based On The Approved Drawings, Dimensions, Components, And Materials. Machine Specification: 1. Dimension: 2.5 X 1.9 X 2.64 M 2. Effective Working Area: 2.4 X 0.65 X 2.6m 3. Pump Motor: 1hp, Single Phase, 220v 4. Suction Blower: 1 Unit, 3hp, Single Phase, 220v 5. Filter: G-fiber, Customized Frame, With Spare Qty: 2 Units B. Fabrication Of Fprdi Furnace Type Lumber Dryer (1000 Bd-ft Capacity) Based On The Approved Drawings, Dimensions, Components, And Materials Qty: 2 Units Inclusion: Warranty: 1 Year Warranty On Parts And Service In Case Of Machine/equipment Breakdown, Provide Supply Of Appropriate Parts And Local Technician For The Whole Duration Of Contract Or Warranty Period. The Manufacturer Must Have 10 Years Of Experience In Machine Fabrication. The Bidder To Submit The Sales Track Record For The Past 10 Years On Fabricated, Delivered, And Commissioned Machines And Equipment (none Fprdi Machines). Delivery Period: 90 Days Delivery Site:  Isabela State University, Cabagan, Isabela (item A To B)  Visayas State University, Baybay, Leyte (item A To B) Training: Provision Of Training On The Operation And Maintenance Of The Machines. ------- Nothing Follows ----------- 1 3,650,000.00 ,000.00 3,650,000.00 Total 3,650,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Fprdi Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Ninety (90) Calendar Days From Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least 60% Interest Or Outstanding Capital Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From The Fprdi-bids And Awards Committee (bac) Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 05, 2024 (tuesday) From The Given Address And Website Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Ten Thousand Pesos (php 10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees, Such As A Copy Of The Official Receipt Issued By The Fprdi Cashier Or Bank Deposit Slip Which May Be Presented In Person, By Facsimile Or Through Electronic Mail. Note: Bank Deposit Transaction Is Encouraged. 6. The Fprdi Will Hold A Pre-bid Conference On November 11, 2024 (monday), 2:00 Pm At The Fprdi Conference Hall, 4th Floor, Pprtc Building, Fprdi College, Laguna. Minimum Health Safety Protocols Shall Be Strictly Implemented. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission, Or (ii) Courier, At The Office Address Indicated Below On Or Before November 25, 2024 (monday), 2:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Form Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bids Opening Shall Be On November 25, 2024 (monday), 2:00 Pm., At Fprdi Conference Hall, 4th Floor, Pprtc Building, Fprdi College, Laguna. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. 10. The Fprdi Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Mary Grace B. Katigbak Bac Secretariat Dost-fprdi Domingo Lantican Ave (formerly Narra Rd.) Upcfnr Campus, Uplb, College, Laguna 4031 Telephone No. 049-536-2377 Local 1003 Telefax No. 049-536-3362 Email Address: Property@fprdi.dost.gov.ph Website: Https://fprdi.dost.gov.ph Loreto A. Novicio Bac Chairperson

Details: Description 1. 1 Unit Mortuary Freezer/refrigerator Unit Cost: Php 1,300,000.00 Specification: -2 Body Freezer/refrigerator -dimensions (mm): 2480x810x1300 -body Tray Size: 1940x610mm -insulating Layers: 10 Centimeters -refrigerant: R600a -compressor: – Separate Temperature Controller. Has 3 Compressor -thermostat: Microcomputer Control Digital Display -with Free Additional 1 Body Freezer/refrigerator" Physical Description Finished: Stainless Steel Total Weight: 280kg Utility Requirements Voltage: Ac220v Single Phase Total Power: 880w (2 Units) Avr : 3000 Watts, 230v, 60 Hz, Single Phase, Servo Motor Control Type, Toroidal Transformer, With Delay Timer, Circuit Breaker Switch Accessories, Consumables, Spare Parts, Other Component Interior Roller Racks Flush Mounted Door Heavy-duty Chrome Planted Stainless Steel Body Trays, Refrigerator Wooden Case 6 Pieces Strong Quality Universal Wheel Environmental Requirements Cryogenic Temperature: 0°c~-35°c Temperature Reaches: -10 To 5 Degrees Adjustable 18°c Within 24 Hours 2. 1 Unit 24 Placer Centrifuge Unit Cost: Php 350,000.00 Specifications: •metal Housing And Lid •stainless Steel Centrifuging Chamber •practical Lid Locking Device •viewing Post In The Lid •lid Locking And Holding, Imbalance Switch-off, Automatic Rotor Recognition Emergency Lid Lock Release. •foil Keypad, Speed Rpm: Entry In Increments Of 100, Impulse Key For Short Centrifuging , Rcf Key •max Capacity: 4x100ml / 32x15ml •max Rpm: 6,000min •max Rcf: 4,226 •running Time: 1-99min, Continuous Run, Short Cycle Mode (impulse Key) Avr: 2000w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 3. 1 Unit 6 – Placer Centrifuge Unit Cost: Php 280,000.00 Specifications: •small Tabletop •with 90 Swing-out Rotor And Tubes 6x15ml •for Common Blood Collection Tubes •microprocessor Control •time And Speed Individually Adjustable •pure Key For Short Centrifuging •max. Speed : 4,000min , Max Rcf : 2,254 •voltage: 200 – 240 Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 4. 1 Unit Serologic Centrifuge Unit Cost: Php 350,000.00 Specifications: •tabletop, Maximum Speed: 6,0000rpm •maximum Capacity : 8x15ml •electrical : 200-240v •built-in Versatile, 8-place, Fixed – Angle Rotor And Adjustable Lcd Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 5. 1 Unit Platelet Agitator Unit Cost: Php 300,000.00 Specifications: •movement: Flat Bed Agitation •4 Trays (24 Bags ) •frequency Of Oscillation: 65 + / -7 Cycles / Minute •andible Alarm / Beeps For Power Failure •led Indicator For Blown Fuse •continuous Operation •power Supply : 230 + / -10 % Vac 50hz 6. 1 Unit Tissue Flotation Bath Unit Cost: Php 120,000.00 Specifications: •type : Water Bath •electrical Requirements : 230-240v – 60hz •electrical Parameters : 230v:50/60hz, Pmax:300w •controller Type : Microprocessor •led Display •microprocessor – Controlled Heating From Ambient To 65o 7. 1 Unit Vortex Mixer Unit Cost: Php 100,000.00 Specifications: •tabletop Vortex Mixer With 200 To 3000 Rpm + 5% Of Speed Range. •electronic Sensing Technology With Intelligent Control Of Speed, Time And Working Modes •different Oscillation Mixing With 3 Sec Of Acceleration And Deceleration Time •lcd Display, And Permanent Magnet Dc Motor With Over-temperature Protection •two Exchangeable Safety Operation •counting And Countdown Timing Function Specification : •circumferential Shaking Mode •orbital Diameter : 4.5mm •speed Range : 200 To 3000rpm + 5% •maximum Load : 1.0 Kg •operation Mode : Inching : Optical Induction / Continuous Working •speed Control : Pwm Stepless Speed Control •lcd Display •timer Range : 1 Sec To 999 Min •timing Function : Counting And Countdown Timing •power Supply : Dc 24v •with Power Adaptor 24v Dc/ 180-240v 60hz 8. 1 Unit Hot Plate Unit Cost: Php 60,000.00 Specifications: •maximum Temperature : 220°c, Explosion Proof •temperature Range : 40°c – 220°c •plate Diameter : 6.1 •provides 36.5sg. Inches Of Heating Surface •material: Aluminum •electrical : 220v, 5a, 600w, 1ph, 50/60hz Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 9. 1 Unit Cytocentrifuge Unit Cost: Php 350,000.00 Specifications: •processes 12 Specimens At One Time •dimension (w X D Xh ) •with Closed Lid : 16x9.5x24.5in. (40.5x24x62cm) •with Open Lid : 16x25x24.5in (40.5x62.5x62cm) •weight : 26.5 Lb. (12kg) •power Requirements : 100-240 Vac, 50/60hz, 1ph, 150va Max. 10. 1 Unit Therapeutic Ultrasound Machine Dual Head Small And Large Unit Cost: Php 298,120.00 Features: * Built-in Rechargeable Battery * Multi-frequency Treatment Head 1 And 3 Mhz Large * Continuous And Pulsed Ultrasound Therapy * Contact Control: Automatic Power Switch-off And Treatment Time Interruption In Case Of Insufficient Contact; The Visual Indicator Of The Treatment Head Switched On * Pre-programmed Treatment Suggestions: 25 - Evidence Based * Programmable Positions: 300 * Mains Supply Technical Specifications: Power Supply: 100-240 V ± 10% / 50/60 Hz Dimensions (wxdxh) Device: 24 X 32 X 12 Cm Device With Base: 24 X 30.5 X 18.2 Cm Weight: 2 Kg Weight, Including The Optional Battery: 3 Kg" Standard Accessories: * 4-series Operating Instructions (cd Rom) * 4-series Information Booklet * Mains Cable 230v-eur * Mains Cable 230v-eur * Ultrasound Multi-frequency Treatment Head(s) (model Dependent) * Holder Treatment Head (model Dependent) * Contact-gel, Bottle 250 Ml, 1x" Includes: 1 Pc Multi-frequency Treatment Head, Large (5cm2) 1 Pc Multi-frequency Treatment Head, Small (0.8cm2) 2 Pcs Probe Holder Protector 1 Pc Cart Heavy Duty (local) 1 Pc Sonomed Ultrasound Gel (5 Liters) 11. 1 Unit Continous Passive Motion (cpm) Smart Rehabilitation Solution Unit Cost: Php 650,000.00 Features: * Portable Knee Cpm With Smal Size And Light Weight * Adjustable A Length Of Femur And Tibia Position * Progressive Mode: Relieves Pain By Gradual Increment Of Angle Of Rehalibitating Exercise. * Oscillation Mode: Maximizes Its Therapeutic Effect By Repeating Exercise At Each End-angle. * Allows To Select Speed: Uniform/ Accelerated Mode * Easy Operation With Touch Panel And Customized. " Functions: * Speed 1 - 5 Level * Timer 1 - 99 Min. * Count 1 - 99 * Pause 0 - 9 Sec Technical Specifications: * Femoral Size 26 - 45 Cm * Tibia Size 29 - 59 Cm * Motion Range - 10°~ 140° * Speed 75°~ 130°/min * Angle Of Progressive -5°~ 15° * Angle Of Oscillation -5°~ 15° * Count (progressive) 3 - 10 * Count (oscillation) 3 - 10 * Weight 12kg * Dimentions (wxdxh) 360 X 1025 X 500 (mm) * Power Supply 100vac - 240vac, 50/60hz 12. 4 Units Heavy Duty Suction Machine Unit Cost: Php 285,000.00 Features: •piston/cylinder System – Results In Low Working Speed, Quiet, Low Strain On Movable Parts, Minimum Maintenance •rapid Vacuum Build-up •quiet Drive System •precise Vacuum Setting •protection Against Electric Shock Class I Specifications: High Vacuum: -95kpa, -713mmhg High Flow: 40,50,60 L/min Power: 100-240vac, 150w, 60hz Weight – Trolley: 35.3 Lbs Protection Class Ii: With A Protective Earth. Potential Equalization Conductor: Maintains The Difference In Potential At 0, Thus Preventing Any Transfer Of Static Electricity Running Through The Patient Ip21: Protection From Dripping Water Vacuum Gauge: Kpa & Mmhg 13. 10 Units Portable Suction Machine Unit Cost: Php 85,000.00 Specifications: •max. Vacuum: -75 Kpa / -563 Mmhg ± 10% Tolerance •flow: 18 L/min. ± 10% Tolerance •dimensions: 15″ X 6 3/4″ X 11 1/4″ •weight: 8 Lbs •drive Unit: Quatroflex Piston/cylinder Technology •electrical Info •ac/dc: 100 – 240 V | 50 – 60 Hz •power Consumption •ac: 90 W •ac/dc: 80 W •noise Level: 51.2 Db @ 3 Ft •vacuum Regulator: Membrane •protection Against Electric Shock: Type Cf (cardiac Floating: Max. Earth Leaking Current 10 Μa) •medical Device Classification:class Iia •ingress Protection: Ip21 •battery: Nimh •operating Time On Battery: 30 Minutes •charging Time Of Battery: 5 Hours •low Battery Indication: Led And Acoustic •overflow Protection: Disposable Overflow Protection/bacterial Filter 14. 1 Set Laparoscopic Instrument Set Unit Cost: Php 200,000.00 •2 Maryland Dissecting Forceps •2 Grasper Long Tip •2 Grasper Short Tip •2 Shears •2 Hook (electrocoagulation) 15. 7 Units Hydraulic Hospital Stretcher Unit Cost: Php 150,000.00 Features: -the Main Frame Of The Stretcher Is Made Of Electrostatic Plastic Sprayed Galvanized Steel Tube. -the Mattress Platform Is Made Of X-ray Revealed Material. -it Is Equipped With Imported Double Rise-and-fall Hydraulic Pump Systems. 150 Mm Diameter. -dust Proof Castors With International Advanced Central Locking System Make The Stretcher Move Steadily, Reliably And Lightly. -the Stretcher Has The Functions Of Hi-low, Trendelenburg And Reverse Trendelenburg Which Are Controlled By The Treadles Lying At The Two Sides O The Stretcher. -functions Are Supported By Imported Large Hydraulic Pump Which Make The Stretcher Never Swayed. -the Headrest Is Supported By Gas Spring While The Knee Rest Is Controlled By Manual Crank Which Is In The End Part Of The Stretcher. -the Bottom Cover Is Made Of Abs Material And Shaped Once For All Which Can Be Easily Cleaned. The Stretcher Mattress Platform Is Of Separate Structure. -equipped With Infusion Pole, Drainage Hook And Collapsible Stainless Steel Side Rails. -it Is The Best Choice For Emergency Room And Icu Ward For Transferring Patient. -us Hydraulic Pump Size: 204.5 × 79 × 60.5~92 Cm Specification: Packing Dimension: 213.5 X 86.5 X 81.5 Cm Outer Dimensions (side Rails Up): L2095*w800mm（±10mm） Mattress Platform: L1910*w640mm（±10mm） Bed Height: H585-910m（±10mm) Backrest Angle: 0-90° Maximum Thigh Rest: ≥30° Tr/atr: ≥12° Height Of Side Rails(above Mattress Platform): 420mm（±10mm） Safe Working Load: 200kgs 16. 1 Unit Automatic External Defibrillator Unit Cost: Php 146,776.36 (aed) Infants & Children Ecg Monitoring Pulse Oximetry Aed(energy: 200-joues Max.) Manual External Synchronous/asynchronous Defibrillation Description Display: Screen Type: High-resolutiondisplay, Tft Colour Display Screen Size: 7inches (17.7cm) Diagonally Sweep Speed: 5/25/50mm/sec Information: Heart Rate,nibp,spo2,temp,delivered Energy Resolution: 800x480 Aed Voice Promptsand Screen Prompts. Energy Programmable Sequence: 200,300,360 Joules; 150,150,200 Joules; 50, 75, 100 Joules; 30, 30, 50 Joules; Discharge Control: Control On Device Front Panel. Specifications Ecg: Patient Connection: 3-lead Ecg Cable, Or 5-lead Ecg Cable, Paddles. Lead Selection: Displayed On Monitor, Paddles, I, Ii, Iii,avr, Avl, Avf, V. Ecg Size: 2.5,5, 10, 20, 30 Mm/mv Display On Monitor. Heart Rate: 20-350bpm. Protection: With Stand 4000vac/50hz Voltage In Isolation And Work Against Electrosurgical Knife And Defibrillation Nibp Working Mode: Manual/automatic Method: Automatic Oscillation Cuff Type: Standard Adult; Optional Pediatric/neonatal Temp. Measurement Range 0~50℃ Resolution 0.1℃" Pulse Oximetry(spo2) Display: Spo2 Value, Waveform, Pulse Range:0~99%for Adult, Pediatric And Neonatal Patients Probe: Standard Adult Finger Clip Optional Pediatric Y-type Clip And Neonatal Wrap Defibrillator Waveform: Biphasic Defibrillator Type: Manual External Synchronous/asynchronous Defibrillation. Charge Time: Less Than 10 Seconds To 360 Joules Energy Display: Monitor Display Indicates Both Selected And Delivered Energy. Charge Prompt Type: Voice And Visual Prompts. Energy Selection: Selectable At 0, 3, 5, 7, 10, 20, 30, 50, 100, 200, 300, 360 Joules Standard Adult/pediatric Paddles: Reusable External Adult Paddles (pediatric Paddles Integrated) Battery Description Standard Type: Li-ion Battery Li1104c 11.1vdc 4000mah X2 Standard Capacity: Up To 10 Hours Ecg Monitoring Or 60 Full-energy Discharges. Low Battery Indicator: Flashing Low Battery Icon On Display And Bat Indicator On The Panel Of Defi-monitor Be On Recharge Rate: 80% In 3 Hours. 100% In 5 Hours. Built-in Recorder Paper: 50mm Thermal. Printing Method: High-resolution, Thermal Print Head. Record Date, Time ,sweep Speed, Waveform Gain, Heart Rate, Energy (joule) And Ecg Waveform Print Mode Hr Exceed Limits Alarm Recording Auto Timed Recording Real-time Recording Defibrillation Discharge Trigger Recording Power Ac-dc Dual-use: Use The Batteries,ac100v~240v,50/60 Hz. Vehicle Voltage(option): Dc 12v" Main Unit Portable Dimensions:l320xw205xh410 Weight: 7.5kg" 17. 1 Unit Newborn Hearing Screening Machine- Dpoae Screening (single Oae Probe) W/ Patient Data Transfer Program Unit Cost: Php 750,000.00 Dpoae: Distortion Product Otoacoustic Emission • Extra Oae Probe • Laptop • Smart Label Printer • 20 Rolls Of Thermal Paper • Leak Check: Analysis Of Feedback Signal (440 Hz Probe Tone) • Probe Check: Limit Of Maximum Sound Pressure (“stimulus”), Comparison Across Speakers (“symmetry”), Leak Check (“probe Fit”) • Calibration: In-the-ear Calibration With Ear-canal Volume Adjustment • Noise Detection: Narrow Band Noise Around 2f2-f1 • Residual Noise Calculation: Weighted Averaging, Summed Weighting Factors, • Artifact Rejection: Weighted Averaging • Response Detection: F-test, F-value At A Single Point (fsp) • Frequency Ratio F2/f1: 1.22. Sample Rate: 48 Khz (stimulus, Response) Minimum Dpoae Level Criterion: L1 – 70 Db • Measurement Interval: 4096 Samples • Stimulus Modes With Frequency-modulated Dpoae License: Fm = 1.4-1.6 Hz, Modulation Depth = 50 Hz@1 Khz, 100 Hz@4 Khz • Multi-channel Dpoae: Simultaneous Measurement Of Dpoaes At Up To Two F2 Frequencies At A Time • Frequencies F2: 1, 1.5, 2, 3, 4, 5, 6, 8 Khz • Stimulus Level L2: 30 To 65 Db Spl; Step Size: 5 Db • L2/l1 Relation: Automatic Scissor Paradigm: L1 = 0.4 L2 + 39 Db Spl) • Snr Stop Criterion: 6, 9, 12 Db • Factory Defaults: Quick Screen And Standard Screen (5,4,3,2,khz, Overall Stop Criterion 3 Out Of 4, As Fast As Possible, Multichannel, Fmdpoae, 55/65 Db, Snr 6 Db), Manual Retest Option " "additional Features: • Simultaneous Measurement On Left/right Ear – (2 Probes Required) • Entertainment Mode For All Oae Modules Available • Optional Database Software - Data Management Easily View, Archive And Export Test Results • Stores Up To 1000 Patients On The Device • With The Pc-sw Database That Can Transfer Test Results Via Usb • Results Can Be Sorted By Birthdate, Name, Id, Examiner, Date, Time • Export Full-color, 8.5” X 11” Reports In Multiple Formats, With Graphic And Tabular Data, Preset Or Free Comments • Easily Attach Test Results To Patient Records With Many Emr Systems • Patient Demographics On Evice • Noah Compatible Technical Specifications: Device Dimensions: 209 X 98 X 52 Mm, Ca. 500 G, Ca. 475 Display: 240 X 320 Pixel; Graphic Lcd 3.5”, Resistive Touch Screen, Real Time-clock, Piezo-electric Sound Generator, Usb, Output Voltage And Nominal Impedance (headphone Socket): 5 Vpp, 32 Ω Power Consumption: Max. 2 W. Memory Capacity: Up To 1000 Patients, Ca. 1000 Tests (dependent On Test Type). Terms Of Reference: Https://cavite.gov.ph/home/tor-medical-equip-c-b/ Invitation To Bid For This Project Is Also Posted At Www.cavite.gov.ph

Details: Description Rfq No. 2024–11–016d Request For Quotation (rfq) Ministry Of Public Works Bangsamoro Autonomous Region In Muslim Mindanao Sir/madam: Please Quote Your Price For The Article Described Below With The Request That The Condition Or Requirement To Be Complied With An Approved Budget For The Contract (abc) In The Amount Of Php 946,391.25. You Are Hereby Invited To Submit Your Price Quotation On Or Before November 25, 2024, 5:00 P.m. Failure To Submit Means Disqualification. Purpose: To Be Used On Day-to-day Preparation Of Plans And Architectural Design. Item Qty. Unit Title/description Specification Supply And Delivery Of Desktop And Laptop For Mpw-barmm, Regional Office Under Co Fy-2023 1 2 Units Desktop Central Processing Unit A. Model – Core I7 (12700) B. Cores – 12 C. No. Of Performance Cores – 8 D. No. Of Efficient Cores – 4 E. Total Threads – 20 F. Max Turbo Frequency – 4.90 Ghz G. Turbo Boost Max Technology 3.0 Frequency – 4.90 Ghz H. Performance-core Max Turbo Frequency – 4.80ghz I. Efficient-core Max Turbo Frequency – 3.60 Ghz J. Performance-core Base Frequency – 2.10 Ghz K. Efficient-core Base Frequency – 1.60 Ghz L. Cache – 25 Mb Smart Cache M. Processor Base Power – 64 W N. Maximum Turbo Power – 180 W Storage – 1tb (nvme M.2) Ram – 32gb (2x16gb) 3200mhz Ddr4 Psu – 750 W 80+ Gold Monitor – 165hz Ips 24.5” Ups – 650va Ups Os – Windows 11 Pro Antivirus – Anti-malware Software Full Version (high-end Brand) Graphics Processing Unit A. Model - Rtx 3070 B. Interface – Pci Express Gen 4 C. Core Clocks – Boost: 1800 Mhz D. Cuda Cores – 6144 Units E. Memory Speed – 19 Gbps F. Memory – 8gb Gddr6x G. Memory Bus – 256-bit H. Output – Display Port X 3 (v1.4a), Hdmi X 1 (supports 4k@120hz As Specified In Hdmi 2.1) I. Hdcp Support – Yes J. Power Consumption – 290 W K. Power Connectors – 8-pin X 2 L. Recommended Psu – 750 W M. Card Dimension (mm) – 305 X 120 X 57 Mm N. Weight (card/package) – 1160g/1735g O. Directx Version Support – 12 Api P. Opengl Version Support – 4.6 Q. Maximum Display – 4 R. Vr Ready – Yes S. G-sync Technology – Yes T. Adaptive Vertical Sync – Yes U. Digital Maximum Resolution -7680 X 4320 Motherboard A. Cpu – Support 14th / 13th / 12th Gen Processors B. Memory – 4x Ddr4, Maximum Memory Capacity 128gb, Memory Support 5333(oc)/ 5200(oc)/ 5066(oc)/ 5000(oc)/ 4800(oc)/ 4600(oc)/ 4400(oc)/ 4266(oc)/ 4200(oc)/ 4000(oc)/ 3800(oc)/ 3733(oc)/ 3600(oc)/3466(oc)/ 3400(oc)/ 3333(oc)/ 3200(jedec)/ 2933(jedec)/ 2666(jedec)/ 2400(jedec)/ 2133(jedec) Max. Overclocking Frequency: 1dpc 1r Max Speed Up To 5333+ Mhz 1dpc 2r Max Speed Up To 4800+ Mhz 2dpc 1r Max Speed Up To 4400+ Mhz 2dpc 2r Max Speed Up To 4000+ Mhz Supports Dual-channel Mode Supports Non-ecc, Un-buffered Memory Supports Extreme Memory Profile. C. Onboard Graphics – 1x Hdmi, Support Hdmi 2.1, Maximum Resolution Of 4k 60hz, 1x Displayport, Support Dp 1.4, Max. Resolution Of 4k 60hz D. Slot – 5x Pci-e X16 Slot Pci_e1 Gen Pcie 4.0 Supports Up To X16 (from Cpu), Pci_e2 Gen Pcie 3.0 Supports Up To X1 (from Chipset) Pci_e3 Gen Pcie 4.0 Supports Up To X4 (from Chipset) Pci_e4 Gen Pcie 3.0 Supports Up To X1 (from Chipset) Pci_e5 Gen Pcie 3.0 Supports Up To X1 (from Chipset) E. Storage - 2x M.2 M.2_1 Source (from Cpu) Supports Up To Pcie 4.0 X4, Supports 22110/2280/2260/2242 Devices M.2_2 Source (from Chipset) Supports Up To Pcie 4.0 X4 / Sata Mode, Supports 2280/2260/2242 Devices 4x Sata 6g F. Raid – Supports Raid 0, Raid 1, Raid 5 And Raid 10 For Sata Storage Devices G. Usb – 4x Usb 2.0 (rear), 4x Usb 2.0 (front), 2x Usb 5gbps Type A (front), 1x Usb 5gbps Type C (front), 2x Usb 10gpbs Type A (rear), 1x Usb 10gpbs Type C (rear). H. Lan – 2.5g Lan I. Wireless Lan & Bluetooth – Wi-fi 6e, The Wireless Module Is Pre-installed In The M.2 (key-e) Slot, Supports Mu-mimo Tx/rx, 2.4ghz/5ghz/6ghz (160mhz) Up To 2.4gpbs, Supports 802.11 A/b/g/n/ac/ax, Supports Bluetooth 5.3 Fips, Fisma. J. Audio – 7.1-channel High Definition Audio Supports S/pdif Output. K. Internal Io - 1x Power Connector (atx_pwr) 2x Power Connector (cpu_pwr) 1x Cpu Fan 1x Pump Fan 5x System Fan 2x Front Panel (jfp) 1x Chassis Intrusion (jci) 1x Front Audio (jaud) 1x Printer Port (jlpt) 1x Com Port (jcom) 1x Tbt Connector (jtbt, Supports Rtd3) 2x Addressable V2 Rgb Led Connector (jargb_v2) 1x Rgb Led Connector(jrgb) 1x Tpm Pin Header(support Tpm 2.0) 4x Usb 2.0 Ports 2x Usb 5gbps Type A Ports 1x Usb 5gpbs Type C Ports L. Led Feature – 4x Ez Debug Led Mouse A. Wireless B. Size: 124.8x63.4x39.9mm C. Weight: 90g±2g D. Switch: Huano Blue E. Sensor: Pwm 3325 F. Cable: Paracord Type C Max G. Dpi: 10,000 Dpi H. Default Dpi: 800/1600/2400/3600/5000/10000 I. Ips: 100ips J. Acceleration: 20g K. Polling Rate: 125hz/250hz/500hz(default)/1000hz L. Interface: Usb 2.0 M. Battery Type: Li-ion N. Battery Capacity: 400mah Keyboard A. Connectivity – Usb 2.0 (type C To Type A) B. Size (full/tkl) – 100% C. Lightning – 5-zone Rgb D. Aura Sync – Yes E. Anti-ghosting – 19 Keys-rollover F. Macro Keys – Yes G. Usb Report Rate – 1000 Hz H. Profile Hot Keys – Yes I. Lightning Effect Hot Keys – Yes J. Brightness Setting Hot Keys – Yes K. Color Setting Hot Keys – Yes L. Clear On-board Hot Keys – Yes M. Macro Hot Keys – Yes N. Media Hot Keys – Yes O. Cable – 1.8 M Rubber Cable P. Os – Windows 10/11 Q. Software – Armoury Crate R. Dimensions - Keyboard: 451 X 155 X 36 Mm, Wrist Rest: 451 X 66 X 18 Mm. S. Weight - Keyboard: 810g, Wrist Rest: 95g" T. Color – Black Full Tower Casing A. High Airflow Pc Case With Chassis Fan B. Power Supply Support Bottom Mount C. Motherboard Support Ssi Eeb D. Fan Support Front 2x 200mm E. Materials Left Side Panel Tempered Glass F. Materials Left Side Panel Steel G. I/o Panel – Usb Ports 1x Usb 3.2 Gen Type C H. Materials – Exterior Steel I. I/o Panel – Audio In / Out 1x 3.5mm 4 Poles Audio Jack J. Dust Filter – Bottom K. Power Supply Support Atx L. Motherboard Supports Ceb M. Motherboard Support Itx N. Cable Routing – Behind Motherboard Cpu Cooling - Mirror Argb Close Loop Aio Cpu Liquid Cooler, Mirror Argb Pump 360mm. Other Peripherals - High Quality Headset - High Resolution Webcam - Mousepad 2 10 Units Laptop Processor: Amd 5 5625u (6-core, 12-thread, Up To 4.3 Ghz) Graphics: Integrated Amd Radeon Graphics Memory (ram): 16gb Lpddr4x Storage: 1tb Pcie 3.0 Nvme Ssd Display: 14-inch Oled, 2.8k (2880 X 1800) Resolution, 16:10 Aspect Ratio, 90hz Refresh Rate, 0.2ms Response Time, 100% Dci-p3 Color Gamut, 400-nit Brightness, Vesa Displayhdr True Black 500, Pantone Validated Battery: 75wh, Up To 10-15 Hours Of Battery Life Operating System: Windows 11 Home Audio: Harman Kardon-certified Stereo Speakers, Dolby Atmos Support Keyboard: Backlit With A 1.4mm Key Travel Camera: 720p Hd Ir Camera With Windows Hello Connectivity: -2 X Usb-c 3.2 Gen 2 (supports Power Delivery And Display Output) -1 X Usb-a 3.2 Gen 2 -1 X Hdmi 2.0b -1 X Microsd Card Reader -1 X 3.5mm Audio Combo Jack Wireless: Wi-fi 6e (802.11ax), Bluetooth 5.2 Build: Metal Chassis, Weight Approximately 1.39 Kg Color: Jade Black *****nothing Follows***** Other Terms And Conditions: • Delivery Of The Unit Is Required Within Thirty (30) Calendar Days Upon The Date Of Receipt Of Purchase Order; • Specify The Brand And Model, Including The Pictures Or Brochure Of Unit/item Offer; • All Unit/item Offer Shall Endure Minimum Of 1-year Warranty Period For All Parts And Labor; • All Unit/item Offer Shall Endure 7 Days Replacement For Factory Defect Conditions; To Specify The Brand Or Trade Mark And Other Pertinent Date Of Your Product Articles 1. To Quote The Price Of The Articles Actually Verified And Found Of Your Store. 2. To Deliver The Articles To The Office Of The Mpw-barmm Regional Office, Barmm Compound, Cotabato City Within 30 Days From The Receipt Of The Purchase Award. 3. To Submit The Price Quotation Form (pqf) Annex A, On Or Before November 25, 2024, 5:00 P.m. 4. To Accept The Flag Law And Others Laws (foreign Only). 5. To Participate As Bonafide Dealer. 6. This Business Is Duly Licensed And Permitted By The Government.

Details: Description Section I. Invitation To Bid Invitation To Bid For Rehabilitation Of Diversion Works And Construction Of Protection Works For Dohinob Cis The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-repaircis2025-006 (infra) Project Name : Rehabilitation Of Diversion Works And Construction Of Protection Works For Dohinob Cis Contract Location : Pres. M.a. Roxas, Zamboanga Del Norte Scope Of Works : Rehabilitation Of Diversion Works And Construction Of Protection Works (sta. 0 + 000 – Sta. 0 + 045.3) Left Side Approved Budget For The Contract (abc) : Php 9,562,671.10 Contract Duration : 180 Calendar Days Amount Of Bidding Documents : Php 10,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : October 28 – November 20, 2024 At 8:30 Am Pre-bid Conference : November 8, 2024 At 9:00 Am Submission Of Bids : November 20, 2024 At 8:30 Am Opening Of Bids : November 20, 2024 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting October 28 – November 20, 2024. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 November 2024 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 November 2024 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/unk-ujzz-kkq Opening Of Bids : Https://meet.google.com/gdi-fdbf-gij Any Requests For Additional Information Concerning This Bidding Shall Be Directed To The Following: Marietta M. Cortes Bac Secretariat Head, Nia-regional Office Regional Center Ix, Balintawak, Pagadian City, Zambo. Sur Niaregion9bac@gmail.com 09630884373 – Office Number Date Posted: August 1, 2024 (sgd) Antonio B. Gujeling Bac Chairperson 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation & Flood Control To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Experienced In Diversion Dam Construction. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Diversion Dam Construction. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Backhoe 0.45 - 1 Cu.m 1 Backhoe W/ Vibro Hammer 1 Cu.m 1 Cargo Truck 8 Tonner 1 Dumptruck 10 Cu.m 2 Concrete Mixer 1 – Bagger 2 Water Pump 4” Ø 2 Water Pump 6” Ø 2 Concrete Vibrator 5 Hp 1 Survey Instrument 1 Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Backhoe 0.45 - 1 Cu.m 1 Cargo Truck 8 Tonner 1 Dumptruck 10 Cu.m 1 Survey Instrument 1 The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit A. Rehabilitation Of Diversion Works Class B Concrete, 16.56 Mpa 29.22 Cu.m B. Protection Works Structure Excavation (mechanized) 136.20 Cu.m Structure Backfill (mechanized) 143.44 Cu.m Selected Earthfill (with Compaction) 430.28 Cu.m Filter Drain 13.84 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 6,552.70 Kg Class A Concrete, 20.76 Mpa 149.95 Cu.m Supply & Delivery Of Steel Sheet Pile (0.1 X 0.4 X 6m) 100 Pc Steel Sheet Pile Installation (0.1 X 0.4 X 6m) 600 Ln.m Cofferdamming & Care Of River 1 Ls C. Project Billboard 1 Ls D. Temporary Works, Mobilization And Demobilization 1 Ls E. Occupational Construction Safety And Health Program 1 Ls

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Kitchen Laboratory Equipment For Bs Nutrition And Dietetics" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Kitchen Laboratory Equipment For Bs Nutrition And Dietetics" With An Approved Budget For The Contract (abc) Four Hundred Thirty-five Thousand Five Hundred Seventy Pesos Only (php 435,570.00). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1. 10 Unit 2cm Jumbo Steamer Food 3layer Aluminum;big Size & Heavyduty 50,000.00 2. 2 Unit Artisan Bowl Lift Stand Mixer Features: 5.7 L Capacity; With The Following: (1) Coated Flat Beater, (2) Coated Powerknead Spiral Dough Hook, (3) Wire Whip 90,000.00 3. 5 Unit Blender Working Voltage: 220 Vac Volume: At Least 1.25l Heat-resistant Glass Jar Blade: High Performance Ice-crushing Stainless Steel Speed:10-speed 25,850.00 4. 5 Unit Broiler Turbo Broiler Made Of Heatproof/tempered Glass 30,000.00 5. 2 Unit Coffee Maker • Product Name / Semi Automatic Coffee Machine • Product Model / Crm3605 • Pressure Mode / Pump Pressure • Pressure Size / 15bar • Water Tank Capacity / 1.7l • Rated Power / 1450w • Rated Voltage / 220 ? ~ 50 Hz • Product Size / 285 × 257 × 315mm 54,000.00 6. 5 Piece Double Boiler Double Boiler With Steamer 18 Cm Stainless Steel Classic Design Material: Stainless Steel 304 Composed Of Saucepan, Shallow Pan And Steamer Insert Lower Body : Sauce Pan 6 Inches X 4 1/2 Inches ; Thickness 0.60mm Upper Body : Sauce Pot 7 Inches X 3 Inches Inner Steamer : 7 Inches X 3 Inches Food Grade Quality Mirror Polish Finish Stainless Body With Lift-off Cover Used For Gentle Heating Sturdy And Easy To Clean Ideal For Baking, Making Chocolates, Sauces And Gravies Steamer Insert Ideal For Dim Sum, Seafood And Vegetables Induction Cooker Compatible 15,000.00 7. 3 Unit Electric Jug Kettle 2l 1800w Stainless Steel Anti-dry Protection Electric Auto Cut Off Jug Kettle 3,000.00 8. 3 Piece Electric Oven Pastry Bread Oven 60l 3200w High Power Oven 29,370.00 9. 3 Unit French Press Made Of Durable Stainless Steel, Both The Interior And Exterior, Made To Last For A Lifetime Double Stainless Steel Wall Structure, Insulation Design, You Can Never Burn By The Hot Coffee With Precision Filter, The Coffee Or Tea Grounds Can Be Filtered Out Completely Mirror Finish Outside And Brushed Finish Inside, An Addition To Your Kitchen Counter-top 4,500.00 10. 5 Piece Frying Pan - Large Non Stick 12" 15,000.00 11. 5 Piece Frying Pan - Medium 10" Round 12,500.00 12. 2 Unit Induction Cooker • 200mm Wide Cooking Zone • 6-preset Cooking Function (saute, Water Boil, Steam, Soup And Hot Milk) • 9-level Power Setting • 10-level Temperature Setting • Child-lock Function • Programmable Cooking Timer • Off Timer Settings Up To 3 Hrs. • Preset Timer Up To 24 Hrs. • Adjustable Timer & Setting • 4-digit Display • Touch Sensitive Switch Type • Thermal Fuse Protected • Ferromagnetic Sensor • 2600 Watts • Lxwxh: 60 X 36 X 7 Cm 30,000.00 13. 5 Unit Juicer Working Voltage: 220 Vac Capacity: At Least 350ml Can Do The Ff: Functions: Grind,mix,blend,smoothie Make,juice Extract,chop,slice,shred Have 2 Speeds And Pulse With Safety Switch 14,850.00 14. 2 Unit Multi Function Pressure Cooker • Material: Aluminum • Liquid Capacity (qts.): 30 • Inside Diameter, Inches: 12.5 • Inside Height, Inches: 14 • The Professional Quality Deluxe Cast Aluminum Pressure Cooker / Canner With The Exclusive ""metal-to-metal"" Seal • Does Not Use Gaskets With ""metal-to-metal"" Seal • Size: 32 H X 42 W X 38d Cm • Weight: 10 Kg 40,000.00 15. 5 Piece Portable Hand Mixer(a) 5 Speed Settings Stainless Steel Dough Hook & Beater 250 Watts Power Motor 6,500.00 16. 5 Unit Turbo Broiler 15,000.00 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The 2nd Floor Jose Rizal Bldg., Gpb Main Campus I, Rizal Avenue, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of November 25, 2024. E-mail : Procurement.pb.external@g.bastate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Joseph D. Mendoza Head, Procurement Office 2nd Floor Jose Rizal Bldg., Gpb Main Campus I, Rizal Avenue, Batangas City (043) 779-8400 To 8406 Loc 1830 / 0960-3380495

Details: Description 1. Anti-bacterial Soap …………………………………………………. 306 Bars 2. Basin Large …………………………………………………. 5 Pcs 3. Ceiling Broom Extendable – Plastic …………………………………………………. 1 Pc 4. Detergent Long Bar Soap …………………………………………………. 50 Bars 5. Powder Detergent 2.2 …………………………………………………. 873 Kgs 6. Detergent Powder 1kg …………………………………………………. 110 Kgs 7. Detergent Powder 500g …………………………………………………. 2 Grams 8. Detergent Powder 64g (6's) …………………………………………………. 30 Packs 9. Detergent Powder 45g …………………………………………………. 525 Pcs 10. Disposable Baby Diaper 2xl …………………………………………………. 108 Pcs 11. Disposable Adult Diaper Medium …………………………………………………. 20 Pcs 12. Dipper …………………………………………………. 13 Pcs 13. Air Freshener …………………………………………………. 65 Pcs 14. Disinfectant Spray …………………………………………………. 41 Pcs 15. Disinfectant Spray …………………………………………………. 61 Btls 16. Air Freshener …………………………………………………. 12 Pcs 17. Disposable Paper Cups 8oz 25's …………………………………………………. 60 Packs 18. Dishwashing Liquid 250ml …………………………………………………. 112 Btls 19. Dishwashing Liquid 1gal …………………………………………………. 13 Gals 20. Door Mat …………………………………………………. 111 Pcs 21. Doormat Rubber Big (coil) …………………………………………………. 2 Pcs 22. Garbage Bag Xxl 18.5x18.5x40 – Black …………………………………………………. 15,915 Pcs 23. Garbage Bag Xl …………………………………………………. 3,320 Pcs 24. Garbage Bag Xl 10's …………………………………………………. 4 Packs 25. Garbage Bag Large 13x13x32 Black …………………………………………………. 1,550 Pcs 26. Garbage Bag Large 10's …………………………………………………. 25 Packs 27. Garbage Bag Medium 11x11x24 …………………………………………………. 800 Pcs 28. Garbage Bag Medium 11x11x24 10's Black …………………………………………………. 4 Packs 29. Garbage Bag Small – Black …………………………………………………. 1,030 Pcs 30. Fabric Conditioner 27ml (6's) …………………………………………………. 55 Packs 31. Facial Tissue …………………………………………………. 15 Bxs 32. Floor Cleaner …………………………………………………. 77 Btls 33. Floor Mop …………………………………………………. 29 Pcs 34. Spin Dry Mop W/ Bucket …………………………………………………. 17 Sets 35. Floor Mop Head – Ordinary …………………………………………………. 2 Pcs 36. Spin Dry Mop W/ Bucket – Refill …………………………………………………. 5 Pcs 37. Soft Broom …………………………………………………. 49 Pcs 38. Stick Broom …………………………………………………. 893 Pcs 39. Stick Broom With Long Handle …………………………………………………. 3 Pcs 40. Heavy Duty Dustpan - Cooking Oil Tin Can …………………………………………………. 86 Pcs 41. Dust Pan Plastic Big …………………………………………………. 20 Pcs 42. Glass Cleaner …………………………………………………. 50 Btls 43. Alcohol 70% - 500ml …………………………………………………. 54 Btls 44. Alcohol Per Gallon …………………………………………………. 2 Gals 45. Laundry Brush With Wooden Handle …………………………………………………. 6 Pcs 46. Liquid Declogger …………………………………………………. 1 Btl 47. Liquid Disinfectant …………………………………………………. 83 Btls 48. Liquid Disinfectant - Concentrated 500ml …………………………………………………. 1 Btl 49. Liquid Disinfectant - 1/2 Gal …………………………………………………. 50 Btls 50. Liquid Disinfectant - 1gal …………………………………………………. 98 Gals 51. Muriatic Acid Gal …………………………………………………. 2 Gals 52. Muriatic Acid 500ml …………………………………………………. 0 Btl 53. Multi-insect Killer Spray …………………………………………………. 53 Cans 54. Paper Towel - Big Jumbo …………………………………………………. 30 Rolls 55. Pail Big 24l …………………………………………………. 5 Pcs 56. Push Brush …………………………………………………. 12 Pcs 57. Push Brush W/ Steel Handle …………………………………………………. 8 Pcs 58. Round Rag 25's …………………………………………………. 320 Bndls 59. Round Rag 25's White …………………………………………………. 18 Bndls 60. Sacks …………………………………………………. 3,690 Pcs 61. Sanitary Napkin 8's ………………………………………………….20 Packs 62. Shampoo Sachet 6's …………………………………………………. 30 Packs 63. Steel Wool …………………………………………………. 301 Pcs 64. Surface Cleaner – Pledge …………………………………………………. 5 Pcs 65. Table Napkin …………………………………………………. 20 Packs 66. Toilet Deodorizer With Handle…………………………………………………. 178 Pcs 67. Toilet Disinfectant Liquid …………………………………………………. 18 Btls 68. Toilet Tissue …………………………………………………. 108 Rolls 69. Toothpaste Sachet 6's …………………………………………………. 55 Packs 70. Trash Bin With Cover Big …………………………………………………. 7 Pcs 71. Trash Bin With Cover Small …………………………………………………. 3 Pcs 72. Biscuit …………………………………………………. 4 Cans 73. Biscuit …………………………………………………. 3 Cans 74. Biscuit …………………………………………………. 5 Cans 75. Biscuit …………………………………………………. 3 Cans 76. Biscuit …………………………………………………. 3 Cans 77. Coffee 100g …………………………………………………. 12 Pcs 78. Coffee Creamer 450g …………………………………………………. 12 Pcs 79. Cooking Oil 320ml …………………………………………………. 9 Btls 80. Fish Sauce 350ml …………………………………………………. 6 Btls 81. Ketchup 320ml …………………………………………………. 6 Btls 82. Soy Sauce 350ml …………………………………………………. 6 Btls 83. Vinegar 350ml …………………………………………………. 6 Btls 84. White Sugar …………………………………………………. 6 Kilos 85. Hand Sanitizer With Pump …………………………………………………. 10 Btls 86. Squeegee …………………………………………………. 2 Pcs 87. Scrubbing Pad With Foam …………………………………………………. 54 Pcs 88. Scouring Pad Big …………………………………………………. 55 Pcs 89. Chamois/canebo …………………………………………………. 7 Pcs 90. Toilet Powder Cleanser …………………………………………………. 2 Pcs 91. Liquid Handsoap 1gal …………………………………………………. 11 Gals 92. Hand Soap Big …………………………………………………. 13 Bots 93. Liquid Hand Sanitizer 1gal …………………………………………………. 10 Gals 94. Moth Balls …………………………………………………. 1 Pack 95. Toilet Brush …………………………………………………. 17 Pcs 96. Disposable Face Mask 50's …………………………………………………. 3 Bxs 97. 4-gang Outlet (for Extension Cord) Universal …………………………………………………. 1 Pc 98. Hanger With Sipit 12's …………………………………………………. 3 Doz 99. Adaptor Socket – Triple …………………………………………………. 2 Pcs 100. Feather Duster …………………………………………………. 12 Pcs 101. Storage Box 120 Liter …………………………………………………. 2 Pcs 102. Lpg Gas Refill …………………………………………………. 1 Tank 103. Toothbrush …………………………………………………. 30 Pcs 104. Bottle Spray …………………………………………………. 4 Pcs 105. Drum - Plastic Big 168l …………………………………………………. 2 Pcs 106. Rain Coat …………………………………………………. 100 Pcs 107. Rubber Boots …………………………………………………. 100 Pairs 108. Fiber Cloth …………………………………………………. 5 Pcs 109. Stainless Steel Cleaner & Polish 3m 21oz 600g …………………………………………………. 1 Pc 110. Rubber Gloves Medium 3m …………………………………………………. 7 Pairs 111. Rubber Gloves Long Xl (cr) …………………………………………………. 30 Pairs Please Be Informed That The City Government Of Dasmariñas Is Only Accepting Cash Or Manager’s Checks Issued By A Universal Or Commercial Bank Equivalent To 2% Of The Approved Budget For The Contract (abc) As The Only Form Of Bid Security And A Performance Security Equivalent To 5% Of The Total Contract Price.

Details: Description 1.the Local Government Of San Mariano, Isabela Intends To Apply The Sum Of One Hundred Sixteen Million Two Hundred Fifty Three Thousand Two Hundred Forty Six Pesos And Sixty-six Centavos (p 116,253,246.66) Being The Approved Budget For The Contract (abc) With Solicitation No. Infra-etg-10-24-034 To Payments Under The Construction Of San Mariano Water System - Phase 2 Through Loan Assistance From The Land Bank Of The Philippines. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the Local Government Of San Mariano, Isabela Now Invite Bids For The Construction Of San Mariano Water System - Phase 2. Completion Of The Works Is Required In Three Hundred Sixty (360) Calendar Days. The Project Comprises The Design And Build Scheme For The Detailed Design, Two (2) Booster Pumping Stations, One Concrete Ground Reservoir With 160 Cubic Meters Capacity, Powerline Extension With Distribution Transformer And Accessories, Diesel Generator Set, Two (2) 100-cu.m. Steel Elevated Tanks, Pipelines And Appurtenances And Service Connection Clusters. The Prospective Bidder Should Have Completed, Within Ten (10) Years Prior To The Date Of Submission And Receipt Of Bids, A Single Largest Completed Contract (slcc) Similar To The Project, Equivalent To At Least 50% Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3.bidding Will Be Conducted By The Bids And Awards Committee Of Lgu San Mariano Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4.interested Bidders May Obtain Further Information From Lgu San Mariano Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours (9:00 A.m. To 4:00 P.m) 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 25, 2024 To December 16, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos (p50,000.00) Per Set. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Lgu San Mariano, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6.the Bids And Awards Committee Of The Local Government Of San Mariano, Isabela Will Hold A Pre-bid Conference On December 2, 2024, 1:30 P.m., At Conference Hall, 2nd Floor, New Evacuation Building, Municipal Compound, Brgy. Sta. Filomena, San Mariano, Isabela, Which Shall Be Open To Prospective Bidders. 7.bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 16, 2024 At 1:00 Pm. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9.bid Opening Shall Be At 1:30 P.m. On December 16, 2024 At The Conference Hall, 2nd Floor, New Evacuation Building, Municipal Compound, San Mariano, Isabela. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10.the Bids And Awards Committee Of The Lgu San Mariano Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance `with Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for The Detailed Evaluation Of The Design And Build Proposals, A Two-step Procedure Shall Be Adopted By The Bac As Specified In “annex G” Of The 2016 Revised Irr Of Ra 9184 As Follows: First Step Procedure: 1.review Of The Preliminary Conceptual Designs And Track Record Submitted By The Contractor As Indicated In The Bidding Documents Using A Non-discretionary “pass/fail” Criteria That Involve Compliance With The Following Requirements: A.adherence Of The Preliminary Design Plans To The Required Performance Specifications And Parameters And Degree Of Details; B.concept Of Approach And Methodology For Detailed Engineering Design And Construction With Emphasis On The Clarity, Feasibility, Innovativeness And Comprehensiveness Of The Plan Approach, And The Quality Of Interpretation Of Project Problems, Risks, And Suggested Solutions; And C.quality Of Personnel To Be Assigned To The Project Which Covers Suitability Of Key Staff To Perform The Duties Of The Particular Assignments And General Qualifications And Competence Including Education And Training Of The Key Staff. 2.for Complex Or Unique Undertakings, Such As Those Involving Highly Specialized Or Advanced Engineering Technology, Eligible Bidders May Be Required, At The Option Of The Agency Concerned, To Make An Oral Presentation Within Fifteen (15) Calendar Days After The Deadline For Submission Of Technical Proposals. Second-step Procedure: Only Those Bids That Passed The Above Criteria Shall Be Subjected To The Second Step Of Evaluation. The Bac Shall Open The Financial Proposal Of Each “passed” Bidder And Shall Evaluate It Using Non-discretionary Criteria – Including Arithmetical Corrections For Computational Errors – As Stated In The Bidding Documents, And Thus Determine The Correct Total Calculated Bid Prices. The Bac Shall Automatically Disqualify Any Total Calculated Bid Price Which Exceeds The Abc. The Total Calculated Bid Prices (not Exceeding The Abc) Shall Be Ranked, In Ascending Order, From Lowest To Highest. The Bid With The Lowest Total Calculated Bid Price Shall Be Identified As The Lowest Calculated Bid (lcb). 12.for Further Information, Please Refer To: Bids And Awards Committee Secretariat Bids And Awards Committee (bac) Lgu San Mariano, Municipal Compound, San Mariano, Isabela Cell Phone No.: 0917—71-1125 Email Address: Lgusanmanrianogso@gmail.com

Details: Description Republic Of The Philippines Province Of Dinagat Islands Municipality Of Basilisa Barangay Edera -ooo- Invitation To Bid Provision Of Materials For The Construction Of Water System The Barangay Edera, Through The 20% Barangay Development Fund Intends To Apply The Sum Of Php210,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Provision Of Materials For The Construction Of Water System. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of The Project : Provision Of Materials For The Construction Of Water System Location : Purok-4 Barangay Edera, Basilisa, Dinagat Islands Approved Budget For The Contract :php 210,000.00 Funding Source :20% Bdf Duration :30 Calendar Days No. Item Qty. Unit A. Materials 1 Gi Pipe #1 S40 50cm W/ Back To Back Trade 16 Pcs. 2 Gi Coupling #1 S40 4 Pcs. 3 Gi Drain Flag #1 S40 6 Pcs. 4 Tape Lon # ¾ 39 Roll 5 Deep Bars 10mm Standard Size 2 Lenght 6 Tie Wire #16 19 Kilos 7 Cement Type 1 58 Sacks 8 Sahara 56 Pack 9. Marine Plywood ¼ 9 Sheet 10 Common Nails #3 5 Kilos 11 Common Nails 1½ ½ Kilo 12 Common Nails #4 7 Kilos 13 Common Nails # 1 1 Kilo 14 Washed Sand 234 Cans 15 Washed Gravel 274 Cans 16 Lumber (2x2x8) 45 Pcs. 17 Pe Hose #1½ Sdr Ii 7 Roll 18 Pe Coupling 1 ½ 8 Pcs 19 Pe Tee # 1 ½ 3 Pcs 20 Pe Hose # 1 Sdr Ii 3 Roll 21 Pe Hose # ½ Sdr Ii 150 Meters 2 Roll 22 Water Pump Motor Lacepro 1.5 Hp 1 Unit 23 Marine Plywood 3/8 16 Sheet 24 Stainless Shark Faucet 6 Pcs 25 Brash Coupling #1 4 Pcs 26 Brash Coupling # ½ 26 Pcs 27 Gi Nipple S40 # ½ X4 30 Pcs 28 Gi Nipple S40 # ½ X10 12 Pcs 29 Gi Nipple S40 # ½ 12 Pcs 30 Gi Tee S40 # ½ 10 Pcs 31 Gi Union #1 2 Pcs 32 Lumber 2x3x7 (224 Bdft) 64 Pcs 33 Lumber 2x3x8 (200 Bdft) 50 Pcs 34 Lumber 2x3x10 (70 Bdft) 14 Pcs 35 Lumber 2x3x12 (20 Bdft) 120 Pcs Electrical 1 Service Drop Wire #6 250 Meters 2 Entrance Cup # ½ 1 Pc 3 Pvc Pipe # ½ 1 Pc 4 Thhn # 10 10 Meters 5 Junction Box 1 Pc 6 T Switch 1 Pc 7 Receptacle #2 1 Pc 8 Capsol Firefly 15w 1 Pc 9 Staple #1 1 Pc 10 Ppx #14 5 Meters 11 Electrical Tape (armak Big) 1 Roll 12 Safety Breaker Rotten 30amp 1 Pc. 1. The Barangay Edera Now Invites Bids For Provision Of Materials For The Rehabilitation Of Street Light. Delivery Of The Goods Is Required 30 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 3. Interested Bidders May Obtain Further Information From Barangay Edera And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00pm. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20 – December 10, 2024 From The Address Below. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Amount Of Non-refundable Fee Php 500.00 To The Barangay Treasurer Office For The Bidding Documents Not Later Than The Submission Of Their Bids. 5. The Schedule Of Bac Activities Is As Follows: Procurement Activities Schedule Time Date Venue 1. Date Of Publication November 20 – 28, 2024 2. Period Of Availability/issuance Of Bidding Documents Nov. 20 – December 10, 2024 Barangay Session Hall 3. Deadline Of Submission And Opening Of Bids 10:00 A.m. Dec. 10, 2024 Barangay Session Hall 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 10:00 A.m. Of Dec. 10, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause () Bid Opening Shall Be On Dec. 10, 2024 At 10:00 O’clock In The Morning At Barangay Edera, Barangay Session Hall. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Barangay Edera Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Amie Y. Calang Bac Chairman Contact No.: (sgd) Amie Y. Calang Bac Chairman Date Publication: 2nd Posting November 20, 2024

Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Bids And Awards Committee Provincial Capitol, Estaka, Dipolog City Email Add: Bidsandawards22@gmail.com November 20, 2024 Invitation To Bid The Provincial Government Of Zamboanga Del Norte Through The Bids And Awards Committee (bac) Is Inviting Interested Parties/ Bidders To Bid For The Following Contract: Contract Id: Pr#200(01)24-10-405(o) Contract Name: Procurement Of Spare Parts For Vehicle Repair And Maintenance Location/purpose: For Replacement Of Worn-out Parts & Maintenance Of Various Heavy Equipment Of Provincial Government This Province. Approved Budget For The Contract (abc): P736,087.00 (inclusive Of All Applicable Taxes)  Bidders/ Contractors Must Have An Expertise In Undertaking A Similar Project, Completed At Least Two Similar Contracts Which The Equivalent Amount Is At Least 25% Of The Proposed Project For Bidding Within The Last Three Years.  Bidders Are Inform That The Delivery Term Is 30 Calendar Days Upon Receipt Of Notice To Proceed.  Bidders/ Contractors Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents  Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates.  The Eligibility Check/ Screening As Well As The Preliminary Examination Of Bids Shall Use The Non- Discretionary "pass/ Fail" Criteria.  Post Qualification Of The Lowest/ Single Bids Shall Be Conducted.  All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of The Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr).  All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 14.  Bidding Is Restricted To Filipino Citizens/ Sole Proprietorships, Partnerships Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting November 21 – 27, 2024 Availability And Issuance Of Bidding Documents November 21 - 28, 2024@ 08:30am Deadline For The Submission Of Bids November 28, 2024@ 08:30 Am Bid Opening And Evaluation November 28, 2024@ 09:00am  Payment For Bidding Documents Is A Non- Refundable Amount Of One Thousand Pesos Only (php1,000.00) Payable To The Office Of The Provincial Treasurer, Provincial Capitol Building, Dipolog City.  Prospective Bidders May Obtain Further Information From The Office Of The Bids And Awards Committee, Provincial Capitol Building During Office Hours @ 8:00am - 5:00pm.  Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Stated Above.  The Provincial Government Of Zamboanga Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.  Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The Provincial Office Of Zamboanga Del Norte At Bidsandawards22@gmail.com. Atty. Rafael R. Osabel, Jr. Bac Chairman Annex A: Procurement Of Spare Parts For Vehicle Repair And Maintenance Pr# 200(01)24-10-405(o) Abc: P736,087.00 1. 10 Pcs Torque Rod Bushing {skw} (dt-pg-1503) 2. 35 Pcs Torque Rod Bushing (12 Pcs. Pm-pg-1901, 12 Pcs. Dt-pg-1902, 11 Pcs Dt-pg 1904) 3. 4 Pcs U-bolt 24-27-93-350 (pm-pg-1901) 4. 10 Pcs Torque Rod Bolt 18x300 5. 4 Pcs Leaf Spring 018-1 6. 16 Pcs Torque Rod Bolt 18x105 (pm-pg-1901) 7. 4 Rolls Auto Wires# 18 (2 Pc. Dt-pg 1806, 2 Pc. Dt-pg 1404) 8. 4 Pcs Brake Booster Long 9. 4 Pcs Brake Booster Short 10. 4 Rolls Auto Wire #16 (2 Pc. Dt-pg 1806, 2 Pc. Dt-pg 1404) 11. 1 Roll Rubber Hose 5/16 (dt-pg-1806) 12. 1 Roll Rubber Hose 3/8 (dt-pg-1806) 13. 20 Pcs Electrical Tape (10 Pcs. Dt-pg 1806, 10 Pcs. Dt-pg 1404) 14. 4 Sets Brake Lining With Revets 17 H {6wt-1} (dt-pg-1616) 15. 4 Pcs Clutch Booster 105mm(1 Pc.dt-pg-1616, 1 Pc.dt-pg 1404, 1 Pcdt-pg-2003, 1 Pcdt-pg 1405) 16. 4 Pcs Brake Lining With Revets 17 H (giga) (dt-pg-1405) 17. 5 Pcs Oil Seal Inner (dt-pg-1405) 18. 1 Pc Radiator Assy. 5 Rows (dt-pg-1907) 19. 4 Sets Brake Lining With Revets Font (dt-pg-1401) 20. 4 Sets Brake Lining With Revets Rear (dt-pg-1401) 21. 4 Pcs Tail Lamp (2 Pcs.bt-pg-1601,2 Pcs Dt-pg-1709) 22. 4 Pcs Clutch Booster 90mm (2 Pcs.bt-pg-1601, 2 Pcs Dt-pg-1709) 23. 2 Sets Air Horn 2t (1 Pc. Dt-pg-1806, 1 Pc. Dt-pg-1404) 24. 6 Pcs Feed Pump (dt-pg-1806) 25. 5 Pcs Push & Pull Switch 26. 1 Pc Magnetic Switch 27. 2 Pcs Foot Valve (dt-pg-1806) 28. 2 Pcs Bearing 32218 Jr (dt-pg-1404) 29. 4 Pcs Bearing 32217 Jr 30. 8 Pcs Profeller Bolt 31. 1 Pc Magnetic Brake Valve (dt-pg-1404) 32. 1 Pc Universal Tire Wrench (tm-pg-1602) ***nothing Follows***