Pumps Tenders

Details: Description 1. The Department Of Public Works And Highways Regional Office Xi, Davao City, Through Its Bids And Awards Committee (bac), Invites Bidders To Submit Bids For The Infra Projects Funded Under Ra 11936 Fy 2023 Specific Budgets Of National Government Agencies, To Wit: Contract Id : 23l00229 Contract Name/location : Increase In Carrying Capacity Of The College Of Medicine, Usep Tagum - Mabini Campus, Tagum City Scope Of Works : Gravel Access Road And Path Walk; Completion Of Reinforced Concrete Works At Roof Deck; Completion Of Roof Framing And Roofing Works At Roof Deck; Plumbing Works, Ceiling Works, Installation Of Doors And Lighting Fixtures, Tile Works, Airconditioning System, Water Pumping System And Fire Alarm System From Ground To Third Floor; Wiring And Installation Of Panel Board With Main And Branch Breaker On The Fourth Floor; Storm Drainage And Sewerage System, Installation Of Windows, Cement Plaster Finish, Painting Works, Metal Works, Installation Of Projector System And Transformer From Ground To Fifth Floor Approved Budget For The Contract (abc) : Php 89,550,000.00 Contract Duration : 300 Cal. Days The Bac Is Conducting The Public Bidding For This Contract In Accordance With Republic Act No. 9184 And Its Implementing Rules And Regulations (irr). Bids Received In Excess Of The Approved Budget For The Contract (abc) Shall Be Rejected Automatically At Bid Opening. 2. To Be Eligible To Bid For This Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation With Pcab License For Size Range Medium A To Large B, (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. 3. The Dpwh Will Use Non-discretionary “pass/fail” Criteria In The Eligibility Check, Preliminary Examination Of Bids, Evaluation Of Bids, Post-qualification, And Award. 4. If At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184, The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 5. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Activity Time Place 1. Issuance Of Bidding Documents November 20, 2024, Until 12:00 Noon Of December 9, 2024, Procurement Unit Office, Dpwh Xi Compound, R. Magsaysay St., Davao City 2. Pre-bid Conference November 27, 2024 At 2:00 P.m., Dpwh Conference Room, Dpwh Xi Compound, R. Magsaysay St., Davao City 3. Receipt Of Bids Until 12:00 Noon Of December 9, 2024, Office Of The Bac Chairperson, Dpwh Xi Compound, R. Magsaysay St., Davao City 4. Opening Of Bids December 9, 2024, After All Bids Have Been Received And Recorded, Dpwh Conference Room, Dpwh Xi Compound, R. Magsaysay St., Davao City The Bidding Documents May Also Be Downloaded Free Of Charge From The Dpwh (www.dpwh.gov.ph/dpwh/) And Philgeps (www.philgeps.gov.ph/) Websites, Provided That The Bidders Shall Pay The Applicable Fee Of Php 50,000.00 For The Bidding Documents Not Later Than The Date And Time Of The Submission Of Bids, Pursuant To The Latest Guidelines Issued By The Gppb. 6. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r11@dpwh.gov.ph For Electronic Submission Not Later Than The Date And Time Of The Submission. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. Bid Proposals May Be Submitted Through An Authorized Representative Together With A Company Id Or Any Government Issued Id And The Original Authorization Letter (i.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary’s Certificate For Corporation/partnership/joint Venture/cooperative) With Attached Confirmation From The Owner/amo Of The Firm Through Their Registered Email Address In Civil Works Application (cwa) For The Authenticity And Veracity Of Said Authorization Letter. Live Streaming Of Pre-bid Conference And Opening Of Bids Of The Said Procurement Can Be Viewed/watched Live Thru Official Facebook Page: Https://www.youtube.com/@dpwh.ro.11 And Via Zoom Application With Meeting Id: 891 411 3000 Password: Dpwhxi On The Dates Above. 8. The Department Of Public Works And Highways Regional Office Xi, Davao City Reserves The Right To Accept Or Reject Any Bid And To Annul The Bidding Process Any Time Before The Contract Award, Without Incurring Any Liability To The Affected Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. 9. Any Requests For Additional Information Concerning This Bidding Shall Be Directed To The Following: April F. Momo Engineer Iv Head, Procurement Unit Dpwh-xi, R. Magsaysay Street, Davao City Telefax : (082) 272-7410 Email : Momo.april@dpwh.gov.ph Joselito B. Caballero Assistant Regional Director Bac Chairperson

Details: Description 1 1 Kit Ppg Salon Livelihood Kit 11,400.00 Per Kit Includes The Following: 5 Pack Hair Color; Black; 60ml 5 Pack Hair Color; Light Brown; 60ml 5 Pump Bottle Hair Conditioner; 475ml 2 Gallon 70% Ethyl Alcohol; 3.2l 5 Bottle Baby Powder; 500g 5 Pack Tissue; 2ply By 12s 3 Gallon Disinfectant Spray; 1gallon 4 Pc Hair Brush; Roller Brush 5 Pc Hair Brush; Paddle Brush 5 Pc Hair Comb; Regular Size 3 Pc Spray Bottle; 350ml Capacity 5 Pc Towels; 27x52 Inches 5 Bottle Hair Freshener; 50ml 5 Jar Hair Treatment Cream; 650ml 1 Pc Multipurpose Plastic Rack; 4 Layers 2 5 Kit Ppg Frozen Foods Livelihood Kit 57,000.00 Per Kit Includes The Following: 20 Pack Pork Tocino 225g 20 Pack Pork Tocino 450g 10 Pack Pork Longanisa Garlic/sweet 230g 10 Pack Pork Longanisa Garlic/sweet 450g 15 Pack Pork Hotdog Regular 230g 12 Pack Pork Hamburger Patties 228g 20 Pack Pork Sweet Ham 250g 3 2 Kit Ppg Bigasan Livelihood Kit 22,800.00 Per Kit Includes The Following: 2 Sack Regular Milled, Local 50 Kg 3 Sack Well-milled, Imported 25 Kg 4 Sack Well-milled, Imported 5 Kg • Rice Must Be Packed In A Clean Brand-new Sack, Free Of Any Impurity And Foul Smell • Date Of Milling Indicated In The Sack 4 6 Kit Ppg Eatery Livelihood Kit 68,400.00 Per Kit Includes The Following: 6 Pack Washed Sugar 1kg 5 Tub Margarine 250g 5 Pouch Cooking Oil 1l 8 Pet Bottle Vinegar 1l 8 Pet Bottle Banana Catsup 1kg 8 Bottle Oyster Sauce 765g 8 Pouch Tomato Sauce 1kg 5 Pack Iodized Salt 1kg 8 Pouch Tomato Paste 150g 8 Pc All Purpose Cream 250ml 8 Can Liver Spread 260g 7 Packs Refined Sugar 1kg 8 Pet Bottle Soy Sauce 1l 8 Pet Bottle Fish Sauce 1l 8 Pack Vetsin (msg) 100g 5 Pack Whole Black Pepper 100g 8 Can Condensed Milk 300ml 8 Can Evaporated Milk 370 Ml 4 Pc Processed Cheese 430g 4 Box Broth Cube Chicken (60gx6s) 4 Box Broth Cubes Pork (60gx6s) 4 Box Broth Cubes Beef (60gx6s) 7 Pouch Spaghetti Sauce 1kg 7 Pack Spaghetti Noodles 800g 5 65 Kit Ppg Sari-sari Store Livelihood Kit 741,000.00 Per Kit Includes The Following: 10 Tie 3 In 1 Coffee/pack/sachet (50gx10s) 10 Tie 3 In 1 Coffee/pack/sachet (52gx10s) 10 Pack Refined White Sugar ½ Kg 10 Tie Chocolate Powdered Drink (24gx12s) 15 Can Sardines In Tomato Sauce (155g) Easy Open Can 15 Can Corned Beef (150g) 15 Can Tuna Flakes In Oil (155g) 10 Pouch Banana Catsup (200g) 12 Pouch Vinegar (200ml) 12 Pouch Soy Sauce (200ml) 12 Pouch Patis (150ml) 5 Pouch Palm Oil (250ml) 10 Sachet Seasonings (8gx16s) 20 Pc Instant Noodles Beef Flavor (55g) 20 Pc Instant Noodles Chicken Flavor (55g) 20 Pc Pancit Canton Original Flavor (80g) 20 Pc Pancit Canton Kalamansi Flavor (80g) 20 Pc Pancit Canton Chilimansi Flavor (80g) 10 Sachet Shampoo Sachet (15mlx12s) 10 Sachet Conditioner Sachet (12mlx12s) 2 Pack Tissue 2 Ply By 12s 15 Bar Body Soap 60g 12 Pack Sanitary Napkin By 8s 15 Tie Detergent Powder (75gx6s) 15 Bar Detergent Bar Soap 360g 15 Bottle Liquid Bleach 100 Ml Total: 900,600.00

Details: Description Abc Bidder Lot/item No. Qty. Uom Item Description Unit Price Total Unit Price Total (php) (php) (php) (php) 7 Unit Pvc Reducer Coupling 75mm (63f)*63f Glue 175.93 1,231.51 25 Len Pvc Pipe 75 Glued 6 3206.07 80,151.75 4 Unit Pvc 90 Deg Elbow 75mm Glue 657.64 2,630.56 5 Unit Pvc Tee 75 Glue 90 Deg 701.81 3,509.05 5 Unit Pvc Reducer Coupling 63m(50f)*50f Glue 152.14 760.70 2 Unit Pvc Male Adaptor 63*75*2m Glue 254.43 508.86 4 Unit Pvc 90 Deg Elbow 63mm Glue 272.38 1,089.52 2 Unit Plastic Cap 2 128.34 256.68 47 Len Pvc Pipe 50 Glued 6 825.86 38,815.42 10 Unit Pvc 90 Deg Elbow 50mm Glue 189.72 1,897.20 10 Unit Pvc Tee 50 Glue 90 Deg 184.3 1,843.00 20 Unit Pvc Female Adaptor 50*1.1/2 Socket Glue F 203 4,060.00 20 Unit Plastic Bushing 1.1/2m*1f 53.58 1,071.60 20 Unit Pe Female Adaptor 32*1 100.8 2,016.00 9 Len Hdpe Pipe Sdr 17 32mm*60m 3600 32,400.00 7 Unit Pe Coupling 32mm 145 1,015.00 20 Unit Pe End Plug 32mm 102 2,040.00 10 Unit Pvc Male Adaptor 50*63*1.1/2 Glue 219.56 2,195.60 10 Unit Plastic Bushing 2m*1.1/2f 102.06 1,020.60 5 Unit Pvc Tee 50 Glue 90 Deg 250.55 1,252.75 5 Unit Pvc Union 50 With O-ring Glue 568.27 2,841.35 5 Unit 2" Aquanet Plus Ac Bsp Angle P.r.v 9,900.00 49,500.00 15 Unit Pvc 90 Deg Elbow 50mm Glue 199.71 2,995.65 47 Unit Pe Ball Valve With Single Union 32mm 350 16,450.00 2 Len Meridor Pipe 50mm 2,400.00 4,800.00 267 Unit Pvc Start Conn. Barb 16 W/ Seal 22 5,874.00 14 Roll Blank Dripline 16012 400m 14,650.19 205,102.66 167 Unit Pe Barb Coupling 16 Conn. 9.12 1,523.04 267 Unit Endline Double 0 16/17 5.6 1,495.20 1040 Unit Barb/barb Connector 4/6.5 1.26 1,310.40 1040 Unit Pvc Tube 4*7 1.7meter 40.88 42,515.20 1040 Unit Metal Rod 8mm 120cm Length 278.36 289,494.40 1040 Unit Adapter Fit 4*6.5 Tube/rod 4.5mm 4.73 4,919.20 1040 Unit Spn Lr Stic Stub 035l/h Head Only 64.68 67,267.20 9 Roll Wire #22 3,000.00 27,000.00 4 Roll Blank Dripline 16012 400m 14,650.19 58,600.76 5 Can Weld-on Cement 717 Low Voc Pvc Pl. P1000g 3,000.00 15,000.00 2 Can Weld-on Primer P68 Low Voc Pvc Pl. P1000g 3,000.00 6,000.00 25 Roll Narrow Teflon 80 2,000.00 1 Unit Water Pump Max. Lift 80m ; Max Suction 7m; Outlet/inlet Dia : 50mm ; Max Flow 30cbm/h 15,000.00 15,000.00 *****nothing Follow***** Total 999,454.86 Purpose:to Be Used For Payment Of Labor For The Installation Of Rubber Nursery Expansion Irrigation System In Aroman, North Cotabato. Delivery Period: 20 Calendar Dyas Delivery Site: Da-prri Experimental Station Aroman Carmen, North Cotabato Warranty: Price Validity:

Details: Description Bleach Detergent Liquid, 1 Liter 30 Bottle Dishwashing Liquid, 495ml 30 Bottle Fabric Conditioner, 900ml Min 30 Bottle Glass Cleaner, 500ml 30 Bottle Hand Soap, Liquid, 500ml (safeguard) 30 Bottle All Purpose Cleaner , 450 Ml Bottle 30 Bottle Facial Tissue, 2 Or 3-ply 200 Box Jumbo Toilet Paper Roll Dispenser Single Roll Jumbo Tissue Dispenser Large Capacity Stylish Wall Mount Punch Free For Bathrooms For Toilets (1k) 15 Unit Jumbo Toilet Paper Roll 120 Roll Rubber Band, Elastics Flat, Big, 350g/box 10 Box Air Freshener, Aerosol, 300ml Min 30 Can Air Freshener, Aerosol, Disinfectant Spray, 400g Min 30 Can Furniture Polish With Cleansing Conditioner Rainshower 300ml 20 Can Multi-insect Killer Odorless - 500 Ml 30 Can Muriatic Acid, 4-liter Galon 30 Gal Battery, Dry Cell, Aa, 2 Pieces Per Blister Pack 30 Pack Detergent Powder Soap, 40g Min 200 Pack Sando Bag, White Plastic, Xxl 30 Pack Bathroom Deodorizer, 100g, Assorted 30 Pcs Coil Mat Soft Rubber Absorbent Indoor/outdoor Plain Disinfectant Cushion 30 Pcs Dishwashing Sponge 20 Pcs Extension Wire, Multiple Sockets, 10 Meters 15 Pcs Extension Wire, Multiple Sockets, 5 Meters 15 Pcs Hand Soap, Bar, 135g Min 25 Pcs Toilet Brush With 1-meter Long Handle 10 Pcs Trash Can With Cover, 10 Liter Size 20 Pcs Trash Bag - Black - L 40 Roll Trash Bag - Black - Medium 40 Roll Trash Bag - Black - Xl 40 Roll Trash Bag - Black - Xxl 40 Roll 18.00mm Paper Cutter With Spare Blade- Knife 20 Pcs Mini Soft Broom (small Walis Tambo) 10 Pcs 3-gang Exterior Wall Mount Outlet 30 Pcs Surface Type Utility Box/amco Box.w/screw&tox 30 Pcs Canned Car Airfreshener 180-grams 50 Pcs Car Interior Cleaner,250 Ml Spray Bottle 25 Pcs Car Exterior Cleaner,250 Ml Spray Bottle 25 Pcs App Reference No. _______________________ Item Description (refer To Description / Particulars In The Attached Purchase Request Form) Approved Budget Of The Contract (abc) Per Qty Quotation/offer Price Compliance Quantity (required) (refer To Pw) Remarks (brand, Availability, Etc.) Car Protectant Spray,250 Ml Spray Bottle (armor All) 25 Unit Stainless 3-way Valve 1/2 Inch Diam. Pipe 25 Pcs Kitchen Faucet (stainless Steel Standing Curved Type) 25 Set Hose For High Pressure Pump Car Washer 30 Mtr Universal Plug Adapter 30 Pcs 1-quart Canned Epoxy 10 Pair Flat Cord For Extension & Speaker Wire, #16 50 Mtr Heavy Duty Rubber Plug W/ Clamp, 15amp 125v 50 Pcs 7-watts Led Bulb 200 Pcs Padlock (65mm Wide Size) 15 Pcs 3.0mm Drill Bit (heavy Duty For Steel) 25 Pcs 3.0mm Drill Bit (heavy Duty For Concrete) 25 Pcs Rivets (3.0 Mm X 3/4inch Long) 5 Box Riveter 3 Pcs Presenter Wireless Laser Pointer Remote Controller For Mac Win 3 Unit Spray Paint (clear,preferrably Samurai Paint) 30 Can Spray Paint (white,preferrably Samurai Paint) 30 Can Spray Paint (mint Green,preferrably Samurai Paint) 30 Can Hose Fitting (water Tanker) 3inch 5 Pcs Solignum All Around Clear Paintable 1 Gallon Wood Preservatives Anti 10 Gal Toeing Rope, 5.00 Meter By 10.00 Tons 2 Length Wd-40, 250 Ml 30 Can Screw Driver Set 3 Set Double-sided Tape Installation Tape Heavy Duty 5m Roll Tape 30 Roll Car Floor Matting Set For 7-seater Vehicle 3 Set Car Floor Matting Set For Utility Van 3 Set Mouse Pad 20 Pcs Door Latch Lock ,4.0 Inch 30 Set Door Safety Hasp Lock, 5.0 Inch 30 Set Hand Truck Push Cart ,2-wheeled 3 Unit Hand Truck Push Cart,trolley ,4 Wheeled 3 Unit Alcohol,500 Ml Bottle 30 Bottle Alcohol,1-galon Bottle 30 Gal

Details: Description Roads: Construction – Pccp Cost Of Bidding Documents: Php 5,000.00 Source Of Funds: Fy 2025-dpwh Infrastructure Program Based On Nep The Significant Times And Deadlines Of Procurement Activities Are Shown Below: 1. Issuance Of Bidding Documents: November 15 - December 3, 2024, 8:30am 2. Pre-bid Conference Date & Time: November 21, 2024, 10:000 Am 3. Receipt Of Bids Deadline: December 3, 2024, 10:00 Am 4. Opening Of Bids Date & Time: December 3, 2024, 10:00 Am 5. Venue Of Activities Conference Hall, Cebu City District Engineering Office, V. Sotto St., Brgy. Tinago, Cebu City Prospective Bidders May Download The Bidding Documents (bds), If Available, At The Dpwh Website And At The Philippine Government Electronic Procurement System (philgeps). Bidders That Will Download Bd’s From The Dpwh Website Shall Pay The Said Fees As Stated Above On Or Before The Submission Of Their Bid Documents. The Bac Will Issue Hard Copies Of The Bds At The Same Address To Eligible Bidders Upon Payment Of A Fee Stated Above. The Interested Bidders For Project Numbers 4 & 5 Must Own Or Lease One (1) Unit Prime Mover (low Bed W/ Trailer), One (1) Unit Backhoe With Breaker (0.80 Cu.m.), Se 130 Lc-2, One (1) Unit Payloader Lx80-2c 110hp, One (1) Unit Motorized Road Grader G7 10a 140 Hp, One (1) Unit Water Truck / Pump – 16,000l 360 Hp, One (1) Unit Dump Truck – 12 Cu. Yd., 290 Hp, One (1) Unit Vibratory Roller (10 Mt) 125 Hp, One (1) Unit Concrete Screeder 5.5hp, One (1) Unit Concrete Saw, 14” Blade Ø With ¾” Cutting Depth, 7.5 Hp, One (1) Unit Transit Mixer 5-6 Yd3 175hp, One (1) Unit Concrete Vibrator (flexible Shaft Type 2” Head Dia With 5amp Gasoline Driven Unit), One (1) Unit One-bagger Mixer 4-6ft3 / Min, One (1) Unit Cargo / Service Truck 2-5mt, 160 Hp, One (1) Unit Welding Machine (gas / Diesel Driven, 300amp), One (1) Unit Bar Cutter (25mm Max. Rebar Dia Grade 40, One (1) Unit Bar Bender (25mm Max. Rebar Dia, Three Phase) And One (1) Unit Mechanized Joint Sealer Equipment. Contractors / Applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. As Prescribed In Department Order No.3 Series Of 2015, The Deadline Of Submission Of Contractors Records To The Dpwh-civil Works Registry For Updating Is As Follows: A.) For Class “a” Documents And Financial Statements, Must Be Submitted At Least Seven (7) Calendar Days And B.) Technical Documents (completed / On-going Projects) At Least Fifteen (15) Calendar Days Before The Deadline For The Submission Or Opening Of Bids. Interested Bidders May Obtain Further Information And Inspect The Bidding Documents At The Same Address. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend And Late Bids Shall Not Be Accepted. Bid Submission Maybe Done Manually Or Electronically / Online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission Or At Electronicbids_cebucity@dpwh.gov.ph For Electronic Submission On Or Before The Deadline Stated Above. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. The Cebu City District Engineering Office Reserves The Right To Accept Or Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Hereby Incurring Any Liability To The Affected Bidders And No Responsibility To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Approved: Sharinah A. Batocapala Bac Chairman Noted: Manolo B. Madronio, Jr. Oic-district Engineer

Details: Description Republic Of The Philippines Manolo Fortich Water District A. Ditona St., Tankulan, Manolo Fortich, Bukidnon Invitation To Bid Itb # 2024-11-002 1. The Manolo Fortich Water District Office Through The General Fund 2025 (regular Infrastructure) Intends To Apply The Sums Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Following Project With Corresponding Contract Identification Numbers. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Manolo Fortich Water District (mfwd) Bukidnon Office, Tankulan, Manolo Fortich, Bukidnon, Through Its Bids And Awards Committee (bac), Now Invites Bids For Hereunder Project: Contract Id No. : 2024-11-002 Contract Name : Construction Of Proposed Two (2) Storey Mfwd Building With Roof Deck (administration Building, Manolo Fortich Water District – Kihare Pumping Station Area) (phase 1) Location : Kihare, Barangay Tankulan, Manolo Fortich, Bukidnon Scope Of Work : Construction Of All Footings, Foundation Columns Up To Second Floor, Footing Tie Beams, Concrete Columns Of L/4 From Second Floor Slab, Suspended Slab, Beams And Girders, Metal Steel Deck Panel At Second Floor, Zoccalo Footing, Chb Wall Up From National Grid Line To Finish Floor Without Embankment, Soil Poisoning, Waterline Roughing-in, Plumbing Roughing-in And Electrical Roughing-in. Source Of Funds : Corporate Operating Budget Fy 2025 Abc : Php 11,000,000.00 Contract Duration : 180 Calendar Days Cost Of Bid Document : Php 12,000.00 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category For Classification As Stated Above For Each Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Annex Ii-1.1b Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Mfwd Civil Works Application (cwa) At The Mfwd Procurement Service (prs) 2nd Floor, Mfwd Bldg., A. Ditona Street, Barangay Tankulan, Manolo Fortich, Bukidnon While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Evaluated And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 9:00 Am To 4:00 Pm. Or Email At Mfwd_buk@yahoo.com. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of Mfwd Office And Inspect The Bidding Documents At The Mfwd Office, A. Ditona St., Barangay Tankulan, Manolo Fortich, Bukidnon During Weekdays 9:00 Am To 4:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20, 2024 To December 9, 2024 But Not Later Than 12:00 Pm Of The Deadline From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Stated Above. 7. It May Also Be Downloaded Free Of Charge From The Mfwd Website And The Philgeps Website Provided, That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Mfwd Office Will Hold A Pre-bid Conference On November 26, 2025 At 2:00 P.m., Conference Room, Mfwd, A. Ditona St., Tankulan, Manolo Fortich, Bukidnon Which Shall Be Open To Prospective Bidders. 9. Bid Submission Must Be Done Manually. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below Before 12:00 Pm Of December 9, 2024 Including The Receipt Of Payment. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On December 9, 2024 At 2:00 Pm At Board Room, Mfwd Bldg., Tankulan, Manolo Fortich, Bukidnon. Bids Will Be Opened In The Presence Of At Most Two (2) Bidders’ Representatives Who Choose To Attend The Activity. 13. The Mfwd Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Twg : Engr. Mia Mae P. Quito Address : Mfwd Office A. Ditona St. Tankulan, Manolo Fortich, Bukidnon Contact # : 09535385733 Bac Secretariat Head : Bobby Galon Address : Mfwd Office A. Ditona St., Tankulan, Manolo Fortich, Bukidnon Email Address : Mfwd_buk@yahoo.com Approved By: Engr. Ermito L. Ganas Bac Chairperson Mfwd Office A. Ditona St., Tankulan, Manolo Fortich, Bukidnon

Details: **note: Solicitation Number Will Be Updatedto W91238-25-r-0007 When The Actual Solicitation Is Posted.** this Notice Does Not Constitute A Request For Proposal. the Intent Of This Pre-solicitation Synopsis Is To Make Notice Of A Proposed Contract Action For The Required Construction Project As A Design-bid-build (dbb). the U.s. Army Corps Of Engineers (usace), Sacramento District (spk), Intends To Solicit And Award A Design-bid-build (dbb), Pre-priced Single Award Task Order Contract (satoc) Indefinite Delivery Indefinite Quantity (idiq) For Construction Of Utility Infrastructure Systems To Support The Planned And Future Development Of Multiple Facilities On The East Side Of Hill Air Force Base (afb). The Work Includes The Construction Of Taxiways, Tow-ways, And Associated Airfield Lighting Systems; Roadways, Privately Owned Vehicle Parking, Government Owned Vehicle Parking, Sidewalks, And Emergency Vehicle Circulation; Pump Houses, Lift Stations, And A Communication Information Technology (itn) Node Building; And The Relocation Of A Tactical Navigation (tacan) Facility, As Well As, Upgrades To Various Privately Owned And Government Owned Utility Systems Including Water Production (well), Storage (water Tank) And Distribution; Sanitary Sewer, Storm Sewer, And Industrial Waste; Electrical Distribution And Communications; Natural Gas, And Compressed Air. All Facilities And Infrastructure Systems Will Be Permanent Construction In Accordance With Applicable Department Of Defense Unified Facilities Criteria. special Construction And Functional Requirements: Significant Amount Of Work Requires Coordination With Public, Privatized And Government Installation Utilities Including Culinary Water (privatized), Sanitary Sewer (privatized), Electrical Power (privatized), Storm Sewer (government), Natural Gas (government - Connection To Public Utility, Dominion Energy), Industrial Waste (government), Fire Water (government), Communications (government). the Government Intends To Award The Contemplated Requirement As A Firm-fixed-price Satoc On Or Around 14 April 2025. The Contract Will Have A 799 Day Ordering Period. Task Orders Will Be Issued In Accordance With Dfars 216.504. This Satoc Is Not To Exceed $115m In Capacity. in Accordance With Defense Federal Acquisition Regulation Supplement (dfars) 236.204(iii), The Government Currently Estimates The Magnitude Of Construction For This Project To Be Between $100,000,000 And $250,000,000.the Government Intends To Solicit A Request For Proposals (rfp) That Will Result In Award Of A Firm-fixed Price Type Contract. the North American Industry Classification System (naics) Code For The Potential Requirement Is Anticipated To Be 237990, Other Heavy And Civil Engineering Construction. The Small Business Size Standard For This Naics, As Established By The U.s. Small Business Administration (sba) Size Standard Is $45 Million. The Product Service Code For The Potential Requirement Is Anticipated To Be Y1nz, Construction Of Other Utilities. the Solicitation Is Anticipated To Be Issued Using Full And Open Competition Through The Procurement Integrated Enterprise Environment (piee - Https://piee.eb.mil) And Governmentwide Point Of Entry, The System For Award Management (sam - Www.sam.gov) On Or About 15 November 2024 With Proposals Tentatively Due 14 January 2025. it Is Currently Anticipated That The Government Will Conduct A Pre-proposal Conference And/or Site Visit On Or About 3 December 2024. The Specific Date, Time, Location, And Access Requirements Will Be Identified In Any Forthcoming Solicitation. please Do Not Request A Copy Of The Solicitation, Or Draft Plans And Specifications, As They Are Not Currently Available. Any Available Technical Data Will Be Furnished With Any Forthcoming Solicitation. Following Solicitation Release, All Responsible Sources May Submit A Proposal That Shall Be Considered By The Agency. This Project And/or The Anticipated Solicitation May Be Changed, Delayed, Or Canceled At Any Time. the Anticipated Solicitation And Attachments May Be Posted In Portable Document Format (.pdf) Which Will Require Adobe Acrobat Reader To Open And View Files. Adobe Acrobat Reader May Be Downloaded Free Of Charge At Http://www.adobe.com/products/reader. all Prospective Offerors Should Be Registered In The Piee System At Least One (1) Week Prior To The Anticipated Proposal Due Date. Registration Is Not Required To Download Any Forthcoming Solicitation Documents, Plans, And/or Specifications, But Is Required To Submit A Proposal. Copies Of The Solicitation And Attachments Will Be Made Available For Inspection Without Charge After The Solicitation Is Released, When Accessed Through Piee. Failure To Register In Piee Will Prevent Submission Of Proposals As The Government Will Not Accept Them By Any Other Means. See Linked Piee Registration Instructions And Web-based Training For Information About How To Access The Piee Solicitation Module And Submit Proposals. electronic Proposal Submission Is Required Through Procurement Integrated Enterprise Environment (piee) all Prospective Offerors Must Be Registered In Sam Before The Anticipated Solicitation Closing Date. Please See The Sam Website For Information About Sam Registration Requirements And Approval Timelines. it Is Anticipated That Any Future Solicitation And/or Resulting Contract Will Be Subject To The E-verify Employment Eligibility Verification Program (http://www.uscis.gov/e-verify). Additionally, The Awardee Will Be Required To Contract With The Privatized Utilities Companies That Service Hill Afb To Complete The Required Work. usace Will Not Notify Prospective Offerors Of Any Changes To The Solicitation; Offerors Must Monitor Piee And Sam For The Solicitation To Be Posted, And For Any Posted Changes Or Amendments. the Only Interested Vendors / Plan Holders / Bidders List Is Available Through Sam.gov; Contractors Are Responsible For Identifying Their Entity As An Interested Vendor And Contacting Other Interested Vendors. Usace Spk Will Not Review Capabilities Statements Submitted In Response To This Synopsis Or Coordinate Partnering Arrangements Between Parties. Contractors Should Check Sam.gov Frequently For Changes To The Interested Vendors List And This Notice.

Details: Description Pnhs (main) 1. Commercial Tv - 65 Inches, 4k Uhd, Webos, Smart Home, Web Browser, Screen Share, Mobile Connection Overlay, Hdmi, Usb Port, Ci Slot, Wall Mount Bracket, Cords, Moldings, Cables, Outlets - 2 Lot 2. Full Hd Ip Ptz Camera, 1080p, 60fps, 12x Zoom, Simultaneous Hdmi, 3g-sdi, Usb, Ip Streaming Output, J- Type Ceiling Mount, (pull Box 8"x8"x4", 15m Hdmi Cable, Tox & Screws 4mm, 1/2" Pvc Molding, 1 1/2" Pvc Molding, Flat Cord #16, 2-gang Outlet) - 1 Lot 3. Tv Amd Camera Installation Fee, Layout Hdmi, Power Cable - 1 Lot 4. Built In Electric Ceramic Hob, Black, Soft Cut Hob Edges, Touch Control, Timer Function, Pause Function, Staywarm, 4 Heating Zones, Residual Heat Indicator, Childlock, Dimensions (wxhxd) 59.5 X 5.4 X 52cm - 13 Unit 5. Island Mount Range Hood, Painted Steel/glass/varnished Steel, Electronic Control, Touch Control, 3 Speed Positions, Optistart, 2 Lights, Height, 60mm, Dimensions (wxhxd) 89.8 X 6 X 45.6cm - 13 Unit 6. Built In Electric Oven, Black Glass, 3 Knob Control Feature, Mechanical Timer, Double Glazed Glass Door, 72l Baking Space, 5 Shelf Positions, Forced Cooling System, 9 Functions, Grill Power: 2,300w, Dimensions (wxhxd): 59.5x59.5x56.5cm - 13 Unit 7. 4 Door Refrigerator, 20.7 Cubic Feet Capacity, Black, Inverter, 4 Door Opening, 3 Separate Temperature Controls, Stainless Steel Finish, External Electronic Temperature Control With Led Display, Stylish Interior Led Light For Fridge, 1 Crystal Crisper Drawer, 1 Fresh Converter Box With Glass Cover, Eco Function, Super Freezer Function, Control Panel Lock Function, Door Open Alarm, Dc Centrifugal Fan, Metal Cooling, Twist Ice Maker, Dimensions (wxdxh) 90 X 69 X 190 Cm - 2 Unit 8. Heavy Duty Blender, Ac Motor For Reliable Operation, Easy Cleaning, Efficient Six-blade Knife, Dry Mixing, 6 Presets, On/off Button, Shut-off Timer For Care-free Use, Clearly Laid Out Led Display, Measurement Scale On The Bowl For Perfectly Accurate Dosing, Material: Plastic + Metal, Black, Dimensions ( Wxhxd) 42.7 X 26 X 31.8 Cm, 2litres - 13 Unit 9. Assorted Pots And Pans (2 Casserole, 1 Frypan, 1 Saucepan, 1 Pot, 3 Lids, (18-10 Stainless Steel Finish) - 13 Set 10. Heavy Duty Mixer, Tilt-head Design, 10-speeds, Inclusions: 1 Nylon Coated Flat Beater, 1 Nylon Coated C-dough Hook, 1 6-wire Whish, 1 Pouring Shield, Dimensions: 41 X 28 X 52 Cm; Sifter And Scale Stand Mixer Attachment Included, 4.5 Quartz - 13 Unit 11. 3-piece Pasta Roller & Cutter Set - Pasta Roller 6-inch Sheets Of Pasta With 8 Thickness Settings To Adjust, Pasta Cutter, Fettuccine Cutter, Dimensions (23.5 X 17 X 32 Cm), 3.65kg - 13 Set 12. 75" Smart Tv, 4k Ultra Hd, Cognitive Processor Xr, Full Array Led, Xr Triluminos Pro, Acoustic Multi-audio, Xr Motion Clarity, Xr 4k Upscaling, Google Tv, Hands-free Voice Search - 1 Unit 13. Commercial Coffee Maker - Semi Automatic, Electronic Auto-level, Activated Electronic Pre-infusion, Double Reading Gauge, Automatic Cleaning Cycle, 1 Steam Tap, 1 Water Tap, Training Included For Machine. Led Down Lighting, Extraction Timers, Built-in Volumetric Pump - 1 Unit 14. Heavy Duty Blender, Ac Motor For Reliable Operation, Easy Cleaning, Efficient Six-blade Knife, Dry Mixing, 6 Presets, On/off Button, Shut-off Timer For Care-free Use, Clearly Laid Out Led Display, Measurement Scale On The Bowl For Perfectly Accurate Dosing, Material: Plastic + Metal, Black, Dimensions ( Wxhxd) 42.7 X 26 X 31.8 Cm, 2litres - 2 Unit 15. Sound System: Inclusions - 4 Pendant Speaker, 60watt Multi-tap Transformer, Full Range Pendant, 120 Degrees Conical Coverage, 75 Watts, 8ohms, Installed; Power Amplifier - Volume Controls, Power Switch, Input Sensitivity Switch, Bridge/routing Mode Switch, Installed, 360 Watt, 2 Channels, Class D Amplifier, 8-user Definable Presets, 2 Rca Inputs And One Optical Input, Two Hdmi Inputs And One Hdmi Output, Bluetooth And Usb Inputs - 1 Lot 16. Undercounter Chiller - 2 Door, Stainless Steel, Dimension 1500mm X 700mm X 850, 370l, 94kg Weight, With Avr 3kva 240mm X 300 X 235 400w - 1 Unit Don Bosco National High School 17. Commercial Tv - 65 Inches, 4k Uhd, Webos, Smart Home, Web Browser, Screen Share, Mobile Connection Overlay, Hdmi, Usb Port, Ci Slot, Wall Mount Bracket, Cords, Moldings, Cables, Outlets - 2 Lot 18. Full Hd Ip Ptz Camera, 1080p, 60fps, 12x Zoom, Simultaneous Hdmi, 3g-sdi, Usb, Ip Streaming Output, J- Type Ceiling Mount, (pull Box 8"x8"x4", 15m Hdmi Cable, Tox & Screws 4mm, 1/2" Pvc Molding, 1 1/2" Pvc Molding, Flat Cord #16, 2-gang Outlet) - 1 Lot 19. Tv Amd Camera Installation Fee, Layout Hdmi, Power Cable - 1 Lot 20. Built In Electric Ceramic Hob, Black, Soft Cut Hob Edges, Touch Control, Timer Function, Pause Function, Staywarm, 4 Heating Zones, Residual Heat Indicator, Childlock, Dimensions (wxhxd) 59.5 X 5.4 X 52cm - 13 Unit 21. Island Mount Range Hood, Painted Steel/glass/varnished Steel, Electronic Control, Touch Control, 3 Speed Positions, Optistart, 2 Lights, Height, 60mm, Dimensions (wxhxd) 89.8 X 6 X 45.6cm - 13 Unit 22. Built In Electric Oven, Black Glass, 3 Knob Control Feature, Mechanical Timer, Double Glazed Glass Door, 72l Baking Space, 5 Shelf Positions, Forced Cooling System, 9 Functions, Grill Power: 2,300w, Dimensions (wxhxd): 59.5x59.5x56.5cm - 13 Unit 23. 4 Door Refrigerator, 20.7 Cubic Feet Capacity, Black, Inverter, 4 Door Opening, 3 Separate Temperature Controls, Stainless Steel Finish, External Electronic Temperature Control With Led Display, Stylish Interior Led Light For Fridge, 1 Crystal Crisper Drawer, 1 Fresh Converter Box With Glass Cover, Eco Function, Super Freezer Function, Control Panel Lock Function, Door Open Alarm, Dc Centrifugal Fan, Metal Cooling, Twist Ice Maker, Dimensions (wxdxh) 90 X 69 X 190 Cm - 2 Unit 24. Heavy Duty Blender, Ac Motor For Reliable Operation, Easy Cleaning, Efficient Six-blade Knife, Dry Mixing, 6 Presets, On/off Button, Shut-off Timer For Care-free Use, Clearly Laid Out Led Display, Measurement Scale On The Bowl For Perfectly Accurate Dosing, Material: Plastic + Metal, Black, Dimensions ( Wxhxd) 42.7 X 26 X 31.8 Cm, 2litres - 13 Unit 25. Assorted Pots And Pans (2 Casserole, 1 Frypan, 1 Saucepan, 1 Pot, 3 Lids, (18-10 Stainless Steel Finish) - 13 Set 26. Heavy Duty Mixer, Tilt-head Design, 10-speeds, Inclusions: 1 Nylon Coated Flat Beater, 1 Nylon Coated C-dough Hook, 1 6-wire Whish, 1 Pouring Shield, Dimensions: 41 X 28 X 52 Cm; Sifter And Scale Stand Mixer Attachment Included, 4.5 Quartz - 13 Unit 27. 3-piece Pasta Roller & Cutter Set - Pasta Roller 6-inch Sheets Of Pasta With 8 Thickness Settings To Adjust, Pasta Cutter, Fettuccine Cutter, Dimensions (23.5 X 17 X 32 Cm), 3.65kg - 13 Set 28. 75" Smart Tv, 4k Ultra Hd, Cognitive Processor Xr, Full Array Led, Xr Triluminos Pro, Acoustic Multi-audio, Xr Motion Clarity, Xr 4k Upscaling, Google Tv, Hands-free Voice Search - 1 Unit 29. Commercial Coffee Maker - Semi Automatic, Electronic Auto-level, Activated Electronic Pre-infusion, Double Reading Gauge, Automatic Cleaning Cycle, 1 Steam Tap, 1 Water Tap, Training Included For Machine. Led Down Lighting, Extraction Timers, Built-in Volumetric Pump - 1 Unit 30. Heavy Duty Blender, Ac Motor For Reliable Operation, Easy Cleaning, Efficient Six-blade Knife, Dry Mixing, 6 Presets, On/off Button, Shut-off Timer For Care-free Use, Clearly Laid Out Led Display, Measurement Scale On The Bowl For Perfectly Accurate Dosing, Material: Plastic + Metal, Black, Dimensions ( Wxhxd) 42.7 X 26 X 31.8 Cm, 2litres - 2 Unit 31. Sound System: Inclusions - 4 Pendant Speaker, 60watt Multi-tap Transformer, Full Range Pendant, 120 Degrees Conical Coverage, 75 Watts, 8ohms, Installed; Power Amplifier - Volume Controls, Power Switch, Input Sensitivity Switch, Bridge/routing Mode Switch, Installed, 360 Watt, 2 Channels, Class D Amplifier, 8-user Definable Presets, 2 Rca Inputs And One Optical Input, Two Hdmi Inputs And One Hdmi Output, Bluetooth And Usb Inputs - 1 Lot 32. Undercounter Chiller - 2 Door, Stainless Steel, Dimension 1500mm X 700mm X 850, 370l, 94kg Weight, With Avr 3kva 240mm X 300 X 235 - 1 Unit

Details: Description Bridge: Construction-concrete (superstructure) Cost Of Bidding Documents: Php 25,000.00 Source Of Funds: Fy 2025-dpwh Infrastructure Program Based On Nep The Significant Times And Deadlines Of Procurement Activities Are Shown Below: 1. Issuance Of Bidding Documents: November 15 - December 3, 2024, 8:30am 2. Pre-bid Conference Date & Time: November 21, 2024, 10:000 Am 3. Receipt Of Bids Deadline: December 3, 2024, 10:00 Am 4. Opening Of Bids Date & Time: December 3, 2024, 10:00 Am 5. Venue Of Activities Conference Hall, Cebu City District Engineering Office, V. Sotto St., Brgy. Tinago, Cebu City Prospective Bidders May Download The Bidding Documents (bds), If Available, At The Dpwh Website And At The Philippine Government Electronic Procurement System (philgeps). Bidders That Will Download Bd’s From The Dpwh Website Shall Pay The Said Fees As Stated Above On Or Before The Submission Of Their Bid Documents. The Bac Will Issue Hard Copies Of The Bds At The Same Address To Eligible Bidders Upon Payment Of A Fee Stated Above. The Interested Bidders For Project Number 9 Must Own Or Lease One (1) Unit Prime Mover (low Bed W/ Trailer), One (1) Unit Backhoe (0.80 Cu.m.), Se 130 Lc-2, One (1) Unit Dump Truck – 10 Cu. Yd., 290 Hp, One (1) Unit Payloader Lx80-2c 110hp, One (1) Unit Motorized Road Grader G7 10a 140 Hp, One (1) Unit Cargo / Service Truck 9-10t, 270 Hp, One (1) Unit Vibro Hammer, Dpd600t Hydraulic Pile Driver, One (1) Unit Vibratory Roller 10mt Sd100dc, One (1) Unit Cutting Outfit, One (1) Unit Cargo / Service Truck 2-5t, 270 Hp, One (1) Unit Generator Set (300kw), One (1) Unit Water Truck / Pump – 16,000l 360 Hp, One (1) Unit Air Compressor 356-450cfm, One (1) Unit Demolition Hammer (breaker), One (1) Unit Truck Mounted Crane 41-45 Mt 246 Hp, One (1) Unit One-bagger Mixer 4-6ft3 / Min, One (1) Unit Concrete Vibrator (flexible Shaft Type 2” Head Dia With 5amp Gasoline Driven Unit, One (1) Unit Concrete Drilling Machine, One (1) Unit Plate Compactor Gasoline Engine, One (1) Unit Jackhammer, One (1) Unit Pull-off Machine, One (1) Unit Pull-out Machine, One (1) Unit Pail Can Mixer, One (1) Unit Grout Mixer, One (1) Unit Applicator Machine, One (1) Unit Kneading Machine, One (1) Unit Grinding Cap Wheel 5”, One (1) Unit Grinder 5”, One (1) Unit Pneumatic Scaler, One (1) Unit Disc Sander, One (1) Unit Bar Cutter (25mm Max. Rebar Dia Grade 40, Single Phase) And One (1) Unit Bar Bender (25mm Max. Rebar Dia, Three Phase). Contractors / Applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. As Prescribed In Department Order No.3 Series Of 2015, The Deadline Of Submission Of Contractors Records To The Dpwh-civil Works Registry For Updating Is As Follows: A.) For Class “a” Documents And Financial Statements, Must Be Submitted At Least Seven (7) Calendar Days And B.) Technical Documents (completed / On-going Projects) At Least Fifteen (15) Calendar Days Before The Deadline For The Submission Or Opening Of Bids. Interested Bidders May Obtain Further Information And Inspect The Bidding Documents At The Same Address. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend And Late Bids Shall Not Be Accepted. Bid Submission Maybe Done Manually Or Electronically / Online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission Or At Electronicbids_cebucity@dpwh.gov.ph For Electronic Submission On Or Before The Deadline Stated Above. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. The Cebu City District Engineering Office Reserves The Right To Accept Or Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Hereby Incurring Any Liability To The Affected Bidders And No Responsibility To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Approved: Sharinah A. Batocapala Bac Chairman Noted: Manolo B. Madronio, Jr. Oic-district Engineer

Details: Description Invitation To Bid For 25ei0081 - Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii, Bongabong, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii, Bongabong, Oriental Mindoro/25ei0081. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii Contract Id No. : 25ei0081 Locations : Bongabong, Oriental Mindoro Scope Of Works : Completion Of 1-unit Multti-purpose Building At Barangay Lisap, Phase Ii. This Includes Additional Concrete Works (moulding Of Window & Kitchen Countertop), Paintings, Ceiling Works, Tile Works, Septic Tank, Cistern, Water Pumping System, Electrical & Mechanical Works. Installation Of Stainless Steel Signages, Decorative Stone, Railing, Fire Escape Ladder, Plumbin Fixtures, Window, Kitchen Cabinet, Downspout, Catch Basin, Sewer Lines, Cold Water Lines, And Replacement Of Gutter Are Also Included. Approved Budget For The Contract : Php 2,970,000 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 - December 03, 2024 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On November 19, 2024 At 8:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before December 03, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 03, 2024 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson