Pumps Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental 2nd District Engineering Office Region X Balase St., El Salvador City Invitation To Bid For 25kl0013 - Construction Of Water Supply System, Barangay C.p. Garcia, Gitagum, Misamis Oriental 1. The Misamis Oriental 2nd District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of P4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25kl0013 - Construction Of Water Supply System, Barangay C.p. Garcia, Gitagum, Misamis Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Misamis Oriental 2nd District Engineering Office, Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract: Construction Of Water Supply System, Barangay C.p. Garcia, Gitagum, Misamis Oriental Contract Id: 25kl0013 Location: Gitagum, Misamis Oriental Scope Of Works: Construction/installation Of Water Tank/reservoir With Pump And Secondary Pipelines Approved Budget For The Contract: ₱4,950,000.00 Contract Duration: 80 "3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B, Medium A, Medium B, Large A, Large B, (2) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (3) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph." 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Misamis Oriental 2nd District Engineering Office And Inspect The Bidding Documents At Balase St., El Salvador City During Weekdays From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 24, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 500.00 For Abc Costing 500,00 And Below; Php 1,000.00 For Abc Costing More Than 500,000 Up To 1m; Php 5,000.00 For Abc Costing More Than 1m Up To 5m; Php 10,000.00 For Abc Costing More Than 5m Up To 10m; Php 25,000.00 For Abc Costing More Than 10m Up To 50m; Php 50,000.00 For Abc Costing More Than 50m Up Tp 500m; Php 75,000.00 For Abc Costing More Than 500m. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Misamis Oriental 2nd District Engineering Office Will Hold A Pre-bid Conference On October 31, 2024 @ 1:00pm At Misamis Oriental 2nd Deo Conference Room, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_misamisoriental2 For Electronic Submission On Or Before November 14, 2024 @ 1:00 Pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On November 14, 2024 At 1:00 Pm After Convening Of The Bac At Misamis Oriental 2nd Deo Conference Room. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Misamis Oriental 2nd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Harry A. Rapliza Bac Secretariat Head Misamis Oriental 2nd Deo 74217 Rapliza.harry@dpwh.gov.ph Ryan S. Dy Bac Chairperson Misamis Oriental 2nd Deo 74215 Dy.ryan@dpwh.gov.ph .

Details: Description Project Reference No. 2024-11-23 Goods Invitation To Bid For The Supply, Delivery And Commissioning Of Fprdi Developed Machines For Cy 2025 1. The Forest Products Research And Development Institute (fprdi) Through The Cy 2025 National Expenditure Program (nep) Intends To Apply The Sum Of Three Million Six Hundred Fifty Thousand Pesos Only (php 3,650,000.00) Being The Approved Budget For The Contract (abc) (inclusive Of Vat) To Payments Under The Contract For Supply, Delivery And Commissioning Of Fprdi Developed Machines For Cy 2025. Item No. Particular/description Unit Qty Unit Cost (php) Total Cost (php) 1 Supply, Delivery And Commissioning Of Fprdi Developed Machines For Cy 2025 A. Fabrication Of Fprdi Wet-type Finishing Spray Booth Based On The Approved Drawings, Dimensions, Components, And Materials. Machine Specification: 1. Dimension: 2.5 X 1.9 X 2.64 M 2. Effective Working Area: 2.4 X 0.65 X 2.6m 3. Pump Motor: 1hp, Single Phase, 220v 4. Suction Blower: 1 Unit, 3hp, Single Phase, 220v 5. Filter: G-fiber, Customized Frame, With Spare Qty: 2 Units B. Fabrication Of Fprdi Furnace Type Lumber Dryer (1000 Bd-ft Capacity) Based On The Approved Drawings, Dimensions, Components, And Materials Qty: 2 Units Inclusion: Warranty: 1 Year Warranty On Parts And Service In Case Of Machine/equipment Breakdown, Provide Supply Of Appropriate Parts And Local Technician For The Whole Duration Of Contract Or Warranty Period. The Manufacturer Must Have 10 Years Of Experience In Machine Fabrication. The Bidder To Submit The Sales Track Record For The Past 10 Years On Fabricated, Delivered, And Commissioned Machines And Equipment (none Fprdi Machines). Delivery Period: 90 Days Delivery Site:  Isabela State University, Cabagan, Isabela (item A To B)  Visayas State University, Baybay, Leyte (item A To B) Training: Provision Of Training On The Operation And Maintenance Of The Machines. ------- Nothing Follows ----------- 1 3,650,000.00 ,000.00 3,650,000.00 Total 3,650,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Fprdi Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Ninety (90) Calendar Days From Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least 60% Interest Or Outstanding Capital Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From The Fprdi-bids And Awards Committee (bac) Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 05, 2024 (tuesday) From The Given Address And Website Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Ten Thousand Pesos (php 10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees, Such As A Copy Of The Official Receipt Issued By The Fprdi Cashier Or Bank Deposit Slip Which May Be Presented In Person, By Facsimile Or Through Electronic Mail. Note: Bank Deposit Transaction Is Encouraged. 6. The Fprdi Will Hold A Pre-bid Conference On November 11, 2024 (monday), 2:00 Pm At The Fprdi Conference Hall, 4th Floor, Pprtc Building, Fprdi College, Laguna. Minimum Health Safety Protocols Shall Be Strictly Implemented. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission, Or (ii) Courier, At The Office Address Indicated Below On Or Before November 25, 2024 (monday), 2:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Form Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bids Opening Shall Be On November 25, 2024 (monday), 2:00 Pm., At Fprdi Conference Hall, 4th Floor, Pprtc Building, Fprdi College, Laguna. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. 10. The Fprdi Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Mary Grace B. Katigbak Bac Secretariat Dost-fprdi Domingo Lantican Ave (formerly Narra Rd.) Upcfnr Campus, Uplb, College, Laguna 4031 Telephone No. 049-536-2377 Local 1003 Telefax No. 049-536-3362 Email Address: Property@fprdi.dost.gov.ph Website: Https://fprdi.dost.gov.ph Loreto A. Novicio Bac Chairperson

Details: Description Name Of Project : Procurement Of Construction Materials For The Halal Free Range Chicken Raising For Sga Under Gaab 2024 Location : Ministry Of Agriculture, Fisheries And Agrarian Reform (mafar- Maguindanao) Bangsamoro Autonomous Region In Muslim Mindanao, Barmm Government Center, Cotabato City Approved Budget : Php 129,040.00 Delivery Date : Upon Approval Of Purchase Order Place Of Delivery : Mafar-maguindanao Province, Barmm Specifications : Goods No. Item, Description And Specification Quantity Unit Abc 1. Cement (type 1) 48 Bags 13,920.00 2. Washed Sand 3.00 Cu.m 2,400.00 3. Gravel 6 Cu.m 10,800.00 4. Reinforcement Steel Bar 10mmx6 36 Length 7,200.00 5. 5mm X4x8 Marine Plywood 15 Kg 8,250.00 6. Assorted Common Nail 30 Kg 3,600.00 7. Roofing Nail 10 Kg 1,300.00 8. Plastic Screen Chicken Net Wire Mesh 1.2mx100m 1 Roll 5,000.00 9. Range Net (10ftx100m Roll At 1/2" Holes) With Rope At Nylon Tie 2 Roll 12,000.00 10. Corrugated Roofing 12x0.8m Gauge 26 24 Length 10,800.00 11. 10 Watts Light Bulb With Holder 6 Set 1,740.00 12. 14mm2 Thnn Drop Wire 50 M 4,000.00 13. 3.5mm2 Tw Wire 100 M 3,000.00 14. Flexible Hose 3/4' - Orange 60 M 1,200.00 15. Panel Board 2br. 4 Holes 1 Set 450.00 16. Switch Gang 2 Ways 3 Set 360.00 17. Circuit Breaker Plug-in 1 Set 550.00 18. Service Entrance Cup 1" 1 Pcs 45.00 19. 1" Pve Concrete Nail Clamp 15 Pcs 150.00 20. 1" Electric Tape 5 Rolls 175.00 21. 0.75hp (water Pump) 1 Gal 12,500.00 22. 200l Pvc Drum 1 Pcs 3,500.00 23. 1/2" Hdpe Pipe Sdr 11x120m 2 Pcs 7,600.00 24. Wheel Barrow (lightweight Galvanized Steel, 340mm Pneumatic Tyre, Capacity: 65 Ltr., Height 75mm, With 25. 480mm, Length 1250mm) 1 Unit 7,500.00 25. Shovel (pressed Carbon Steel, Hardened And Tempered, L-320 X W-260 X T-1.75 Mm) 4 Pcs 2,000.00 26. Bolo ( Jungle Bolo 1/4 Thickness X 3"x4 Ft Length) 3 Pcs 3,000.00 27. Plastic Drum 2 Pcs 6,000.00 Grand Total Php 129,040.00 General Conditions 1. All Entries Must Be Typewritten And Legible; 2. Bidders Must Submit The Following Documentary Requirements For Small Value Procurement As Required For Under Section 53.9 Of The Irr Of R.a. 9184; 2.1. Mayor’s Or Business Permit 2.2. Philgeps Registration Number 2.3. Income/business Tax Return 2.4. Omnibus Sworn Statement 3. Place The Quotation In A Sealed Envelope And Type The Following Details On The Date Of The Envelope 3.1. Company’s Name 3.2. Rfq Number 3.3. Philgeps Reference Number 4. Delivery Period Must Be At Least Seven (7) Calendar Days From The Receipt Of The Notice Of Award 5. Items Delivered Must Have Warranties For Unit Replacement, Parts, Labor, Or Other Services 6. Quoted Price Must Be Inclusive Of Taxes And Other Charges Or Fees And Shall Not Exceed The Abc 7. Failure To Comply With These Conditions Would Mean Disqualification Of Your Submitted Quotation 1. Deadline Of Submission And The Opening Of Price Quotation (annex “a”) And Eligibility Documents Is On Or Before 1 O’clock In The Afternoon Of November 22, 2024 To The Following Address: Open Submission, May Be Submitted Manually Or E-mail At Mafarmaguindanaobid@gmail.com. Saudi Mangindra Chairman Bids And Awards Committee (bac) Ministry Of Agriculture, Fisheries And Agrarian Reform (mafar - Maguindanao Province) Barmm Government Center, Cotabato City Thru: Solaiman Kabasalan Head, Bac Secretariat Mafar-barmm, Cotabato City (independent City) Philippines 9600 639360297386 2. For Inquiry, You May Contact The Bac Head Secretariat At Contact Number 0997-1763038/0955-7915785. (sgd) Saudi Mangindra Bac Chairman -------------------------------------------------------------------------------------------------------- Annex “a” Price Quotation Form ____________________ Date The Office Of The Chairman Regular Bids And Awards Committee Ministry Of Agriculture, Fisheries And Agrarian Reform - Maguindanao Province (mafar-maguindanao) Cotabato City Sir/madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Item/s As Follows: No. Item, Description And Specification Quantity Unit Abc Financial Proposal Unit Price Total Price Grand Total Javascript:showlineitemuipop(); (amount In Words) _____________________________________________________________________ The Above-quoted Prices Are Inclusive Of All Costs And Applicable Taxes. ___________________________ Printed Name And Signature Of Authorized Representative ___________________________ Name Of The Company __________________________ Company Tax Identification No. __________________________ Contact Number

Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental 2nd District Engineering Office Region X Balase St., El Salvador City Invitation To Bid For 25kl0006 - Construction Of Water Supply System, Barangay Bonbon, Opol Misamis Oriental 1. The Misamis Oriental 2nd District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of P4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25kl0006 - Construction Of Water Supply System, Barangay Bonbon, Opol Misamis Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Misamis Oriental 2nd District Engineering Office, Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract: Construction Of Water Supply System, Barangay Bonbon, Opol Misamis Oriental Contract Id: 25kl0006 Location: Opol, Misamis Oriental Scope Of Works: Construction/installation Of Water Tank/reservoir With Pump And Secondary Pipelines Approved Budget For The Contract: ₱4,950,000.00 Contract Duration: 80 "3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B, Medium A, Medium B, Large A, Large B, (2) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (3) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph." 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Misamis Oriental 2nd District Engineering Office And Inspect The Bidding Documents At Balase St., El Salvador City During Weekdays From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 23, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 500.00 For Abc Costing 500,00 And Below; Php 1,000.00 For Abc Costing More Than 500,000 Up To 1m; Php 5,000.00 For Abc Costing More Than 1m Up To 5m; Php 10,000.00 For Abc Costing More Than 5m Up To 10m; Php 25,000.00 For Abc Costing More Than 10m Up To 50m; Php 50,000.00 For Abc Costing More Than 50m Up Tp 500m; Php 75,000.00 For Abc Costing More Than 500m. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Misamis Oriental 2nd District Engineering Office Will Hold A Pre-bid Conference On October 30, 2024 @ 1:00pm At Misamis Oriental 2nd Deo Conference Room, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_misamisoriental2 For Electronic Submission On Or Before November 11, 2024 @ 1:00 Pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On November 11, 2024 At 1:00 Pm After Convening Of The Bac At Misamis Oriental 2nd Deo Conference Room. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Misamis Oriental 2nd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Harry A. Rapliza Bac Secretariat Head Misamis Oriental 2nd Deo 74217 Rapliza.harry@dpwh.gov.ph Ryan S. Dy Bac Chairperson Misamis Oriental 2nd Deo 74215 Dy.ryan@dpwh.gov.ph .

Details: Description Republic Of The Philippines Province Of Agusan Del Sur Municipality Of San Francisco Barangay Local Government Unit Of San Isidro Bids And Awards Committee (bac) Invitation To Bid For Second Posting Of Supply And Delivery Of Materials For The Construction Box Culvert At Purok 6 And Purok 8 Of Barangay San Isidro, San Francisco, Agusan Del Sur For Second Posting. 1. The Barangay Local Government Unit Of San Isidro, San Francisco, Agusan Del Sur, Through The Bids And Award Committee (bac) With The 20% Barangay Development Fund C.y. 2023 And 2024 For The Construction Of Box Culvert At Purok 6 And Purok 8 Of Barangay San Isidro, San Francisco, Agusan Del Sur Amounting To Three Hundred Eighty Thousand Six Hundred Thirty-five Pesos (php380,635.00) Of Barangay San Isidro, San Francisco, Agusan Del Sur. (item Description Below) With Contract No. 2024-011-02: Item No. Description Quan Tity Unit Unit Cost Total I Concerete Works & Reinforcement Cement 160 Bags 295 47,200.00 Sand 18 Cu.m 1300 23,400.00 Gravel 9 Cu.m 1300 11,700.00 12mm Rsb 40 Length 280 11,200.00 16mm Rsb 125 Length 480 60,000.00 Tie Wire 27 Kg. 110 2,970.00 Hacksaw Frame 12” 2 Pcs. 350 700.00 Hacksaw Blade (12 Inches, 24tpi) 5 Pcs. 85 425.00 Sub-total 157, 595.00 Ii Formworks 1/2 X 4 X 8 Marine Plywood 50 Sheet 850 42,500.00 2 X 3 X 12 Good Lumber 1350 Bd.ft 47 63,450.00 2 X 2 X 12 Good Lumber 1000 Bd.ft 47 47,000.00 Cwnails #2 25 Kg. 85 2,125.00 Cwnails #4 30 Kg. 85 2,550.00 Cwnails #3 30 Kg. 85 2,550.00 Sub-total 160,175.00 Iii Slope Protection Cement 35 Bags 295 10,325.00 Sand 3 Cu.m 1300 3,900.00 Gravel 1 Cu.m 1300 1,300.00 Boulders 6” To 8” Dia. 8 Cu.m 1200 9,600.00 Pvc 2” Dia. 6 Pcs. 240 1,440.00 Sub-total 26,565.00 Iv Equipment Rental Backhoe 5 Hrs. 2100 10,500.00 Water Pump 5 Day 1600 8,000.00 One Bagger Mixer 16 Hrs. 500 8,000.00 Concrete Vibrator 16 Hrs. 300 4,800.00 Plate Compactor 10 Hrs. 500 5,000.00 V Sub-total 36,300.00 Fuel 50 L 70 3,500.00 Sub-total 3,500.00 Total 380, 635.00 2. The Bids And Awards Committee (bac) Now Invites Bidder For The Supply And Delivery Of Materials For Construction Of Box Culvert At Purok 6 And Purok 8 Of Barangay San Isidro, San Francisco, Agusan Del Sur. Completion Of Works Duration Is 30 Calendar Days. Bidders Should Have Completed Within The Date Of Submission And Receipt Of Bids A Contract Similar To The Project. The Description Of An Eligibility Bidder Is Contained In The Bidding Documents, Particularly In Section Ii Of Instruction To Bidders (itb). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, The Government Procurement Reform Act. 4. The Bids And Award Committee (bac) Will Receive The Bidding Documents At The Address Given Below During Monday To Friday 8:00am To 5:00pm. A Complete Set Of Bidding Documents Can Be Purchased By Interested Bidders On November 14, 2024 To December 5, 2024 And Upon Payment Of Non-refundable Fee For Bidding Documents In The Amount Of Five Hundred (500.00) Pesos. 5. The Barangay Local Government Unit Of San Isidro, San Francisco, Agusan Del Sur, Through The Bids And Awards Committee (bac) Intends To Conduct Pre-bid Conference To All Interested Bidders On November 22, 2024 At Exactly 2:00 O’clock In The Afternoon At Sangguniang Barangay Session Hall, Office Of The Barangay Council, Barangay San Isidro, San Francisco, Agusan Del Sur. 6. Bids Must Be Delivered To The Address Herein Reflected On Or Before The Bid Opening On December 5, 2024 At Exactly 2:00 O’clock In The Afternoon At Sangguniang Barangay Session Hall, Office Of The Barangay Council, Barangay San Isidro, Agusan Del Sur. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In The Instruction To Bidders And Will Be Opened In The Presence Of The Bidder’s Representative Who Choose To Attend At The Address Stated Above. Late Bids Shall Be Not Accepted. 7. The Bids And Awards Committee (bac) Reserves The Right To Accept Or Reject Any Bid, To Annual The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. Interested Bidders May Obtain Further Information From: Sheryl C. Sumanting Head, Bac Secretariat Blgu-san Isidro Rodellio G. Castillo 09984552825 Bac Chairperson Blgu-san Isidro 09510809701

Details: Description Invitation To Bid For 25ei0081 - Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii, Bongabong, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii, Bongabong, Oriental Mindoro/25ei0081. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building At Barangay Lisap, Phase Ii Contract Id No. : 25ei0081 Locations : Bongabong, Oriental Mindoro Scope Of Works : Completion Of 1-unit Multti-purpose Building At Barangay Lisap, Phase Ii. This Includes Additional Concrete Works (moulding Of Window & Kitchen Countertop), Paintings, Ceiling Works, Tile Works, Septic Tank, Cistern, Water Pumping System, Electrical & Mechanical Works. Installation Of Stainless Steel Signages, Decorative Stone, Railing, Fire Escape Ladder, Plumbin Fixtures, Window, Kitchen Cabinet, Downspout, Catch Basin, Sewer Lines, Cold Water Lines, And Replacement Of Gutter Are Also Included. Approved Budget For The Contract : Php 2,970,000 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 - December 03, 2024 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On November 19, 2024 At 8:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before December 03, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 03, 2024 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description Bridge: Construction-concrete (superstructure) Cost Of Bidding Documents: Php 25,000.00 Source Of Funds: Fy 2025-dpwh Infrastructure Program Based On Nep The Significant Times And Deadlines Of Procurement Activities Are Shown Below: 1. Issuance Of Bidding Documents: November 15 - December 3, 2024, 8:30am 2. Pre-bid Conference Date & Time: November 21, 2024, 10:000 Am 3. Receipt Of Bids Deadline: December 3, 2024, 10:00 Am 4. Opening Of Bids Date & Time: December 3, 2024, 10:00 Am 5. Venue Of Activities Conference Hall, Cebu City District Engineering Office, V. Sotto St., Brgy. Tinago, Cebu City Prospective Bidders May Download The Bidding Documents (bds), If Available, At The Dpwh Website And At The Philippine Government Electronic Procurement System (philgeps). Bidders That Will Download Bd’s From The Dpwh Website Shall Pay The Said Fees As Stated Above On Or Before The Submission Of Their Bid Documents. The Bac Will Issue Hard Copies Of The Bds At The Same Address To Eligible Bidders Upon Payment Of A Fee Stated Above. The Interested Bidders For Project Number 9 Must Own Or Lease One (1) Unit Prime Mover (low Bed W/ Trailer), One (1) Unit Backhoe (0.80 Cu.m.), Se 130 Lc-2, One (1) Unit Dump Truck – 10 Cu. Yd., 290 Hp, One (1) Unit Payloader Lx80-2c 110hp, One (1) Unit Motorized Road Grader G7 10a 140 Hp, One (1) Unit Cargo / Service Truck 9-10t, 270 Hp, One (1) Unit Vibro Hammer, Dpd600t Hydraulic Pile Driver, One (1) Unit Vibratory Roller 10mt Sd100dc, One (1) Unit Cutting Outfit, One (1) Unit Cargo / Service Truck 2-5t, 270 Hp, One (1) Unit Generator Set (300kw), One (1) Unit Water Truck / Pump – 16,000l 360 Hp, One (1) Unit Air Compressor 356-450cfm, One (1) Unit Demolition Hammer (breaker), One (1) Unit Truck Mounted Crane 41-45 Mt 246 Hp, One (1) Unit One-bagger Mixer 4-6ft3 / Min, One (1) Unit Concrete Vibrator (flexible Shaft Type 2” Head Dia With 5amp Gasoline Driven Unit, One (1) Unit Concrete Drilling Machine, One (1) Unit Plate Compactor Gasoline Engine, One (1) Unit Jackhammer, One (1) Unit Pull-off Machine, One (1) Unit Pull-out Machine, One (1) Unit Pail Can Mixer, One (1) Unit Grout Mixer, One (1) Unit Applicator Machine, One (1) Unit Kneading Machine, One (1) Unit Grinding Cap Wheel 5”, One (1) Unit Grinder 5”, One (1) Unit Pneumatic Scaler, One (1) Unit Disc Sander, One (1) Unit Bar Cutter (25mm Max. Rebar Dia Grade 40, Single Phase) And One (1) Unit Bar Bender (25mm Max. Rebar Dia, Three Phase). Contractors / Applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. As Prescribed In Department Order No.3 Series Of 2015, The Deadline Of Submission Of Contractors Records To The Dpwh-civil Works Registry For Updating Is As Follows: A.) For Class “a” Documents And Financial Statements, Must Be Submitted At Least Seven (7) Calendar Days And B.) Technical Documents (completed / On-going Projects) At Least Fifteen (15) Calendar Days Before The Deadline For The Submission Or Opening Of Bids. Interested Bidders May Obtain Further Information And Inspect The Bidding Documents At The Same Address. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend And Late Bids Shall Not Be Accepted. Bid Submission Maybe Done Manually Or Electronically / Online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission Or At Electronicbids_cebucity@dpwh.gov.ph For Electronic Submission On Or Before The Deadline Stated Above. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. The Cebu City District Engineering Office Reserves The Right To Accept Or Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Hereby Incurring Any Liability To The Affected Bidders And No Responsibility To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Approved: Sharinah A. Batocapala Bac Chairman Noted: Manolo B. Madronio, Jr. Oic-district Engineer

Details: Description 1. 1 Unit Mortuary Freezer/refrigerator Unit Cost: Php 1,300,000.00 Specification: -2 Body Freezer/refrigerator -dimensions (mm): 2480x810x1300 -body Tray Size: 1940x610mm -insulating Layers: 10 Centimeters -refrigerant: R600a -compressor: – Separate Temperature Controller. Has 3 Compressor -thermostat: Microcomputer Control Digital Display -with Free Additional 1 Body Freezer/refrigerator" Physical Description Finished: Stainless Steel Total Weight: 280kg Utility Requirements Voltage: Ac220v Single Phase Total Power: 880w (2 Units) Avr : 3000 Watts, 230v, 60 Hz, Single Phase, Servo Motor Control Type, Toroidal Transformer, With Delay Timer, Circuit Breaker Switch Accessories, Consumables, Spare Parts, Other Component Interior Roller Racks Flush Mounted Door Heavy-duty Chrome Planted Stainless Steel Body Trays, Refrigerator Wooden Case 6 Pieces Strong Quality Universal Wheel Environmental Requirements Cryogenic Temperature: 0°c~-35°c Temperature Reaches: -10 To 5 Degrees Adjustable 18°c Within 24 Hours 2. 1 Unit 24 Placer Centrifuge Unit Cost: Php 350,000.00 Specifications: •metal Housing And Lid •stainless Steel Centrifuging Chamber •practical Lid Locking Device •viewing Post In The Lid •lid Locking And Holding, Imbalance Switch-off, Automatic Rotor Recognition Emergency Lid Lock Release. •foil Keypad, Speed Rpm: Entry In Increments Of 100, Impulse Key For Short Centrifuging , Rcf Key •max Capacity: 4x100ml / 32x15ml •max Rpm: 6,000min •max Rcf: 4,226 •running Time: 1-99min, Continuous Run, Short Cycle Mode (impulse Key) Avr: 2000w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 3. 1 Unit 6 – Placer Centrifuge Unit Cost: Php 280,000.00 Specifications: •small Tabletop •with 90 Swing-out Rotor And Tubes 6x15ml •for Common Blood Collection Tubes •microprocessor Control •time And Speed Individually Adjustable •pure Key For Short Centrifuging •max. Speed : 4,000min , Max Rcf : 2,254 •voltage: 200 – 240 Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 4. 1 Unit Serologic Centrifuge Unit Cost: Php 350,000.00 Specifications: •tabletop, Maximum Speed: 6,0000rpm •maximum Capacity : 8x15ml •electrical : 200-240v •built-in Versatile, 8-place, Fixed – Angle Rotor And Adjustable Lcd Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 5. 1 Unit Platelet Agitator Unit Cost: Php 300,000.00 Specifications: •movement: Flat Bed Agitation •4 Trays (24 Bags ) •frequency Of Oscillation: 65 + / -7 Cycles / Minute •andible Alarm / Beeps For Power Failure •led Indicator For Blown Fuse •continuous Operation •power Supply : 230 + / -10 % Vac 50hz 6. 1 Unit Tissue Flotation Bath Unit Cost: Php 120,000.00 Specifications: •type : Water Bath •electrical Requirements : 230-240v – 60hz •electrical Parameters : 230v:50/60hz, Pmax:300w •controller Type : Microprocessor •led Display •microprocessor – Controlled Heating From Ambient To 65o 7. 1 Unit Vortex Mixer Unit Cost: Php 100,000.00 Specifications: •tabletop Vortex Mixer With 200 To 3000 Rpm + 5% Of Speed Range. •electronic Sensing Technology With Intelligent Control Of Speed, Time And Working Modes •different Oscillation Mixing With 3 Sec Of Acceleration And Deceleration Time •lcd Display, And Permanent Magnet Dc Motor With Over-temperature Protection •two Exchangeable Safety Operation •counting And Countdown Timing Function Specification : •circumferential Shaking Mode •orbital Diameter : 4.5mm •speed Range : 200 To 3000rpm + 5% •maximum Load : 1.0 Kg •operation Mode : Inching : Optical Induction / Continuous Working •speed Control : Pwm Stepless Speed Control •lcd Display •timer Range : 1 Sec To 999 Min •timing Function : Counting And Countdown Timing •power Supply : Dc 24v •with Power Adaptor 24v Dc/ 180-240v 60hz 8. 1 Unit Hot Plate Unit Cost: Php 60,000.00 Specifications: •maximum Temperature : 220°c, Explosion Proof •temperature Range : 40°c – 220°c •plate Diameter : 6.1 •provides 36.5sg. Inches Of Heating Surface •material: Aluminum •electrical : 220v, 5a, 600w, 1ph, 50/60hz Avr: 1500w Servo-motor Control Type With Time Delay 230v, 60hz, (toroidal Type Transformer) 9. 1 Unit Cytocentrifuge Unit Cost: Php 350,000.00 Specifications: •processes 12 Specimens At One Time •dimension (w X D Xh ) •with Closed Lid : 16x9.5x24.5in. (40.5x24x62cm) •with Open Lid : 16x25x24.5in (40.5x62.5x62cm) •weight : 26.5 Lb. (12kg) •power Requirements : 100-240 Vac, 50/60hz, 1ph, 150va Max. 10. 1 Unit Therapeutic Ultrasound Machine Dual Head Small And Large Unit Cost: Php 298,120.00 Features: * Built-in Rechargeable Battery * Multi-frequency Treatment Head 1 And 3 Mhz Large * Continuous And Pulsed Ultrasound Therapy * Contact Control: Automatic Power Switch-off And Treatment Time Interruption In Case Of Insufficient Contact; The Visual Indicator Of The Treatment Head Switched On * Pre-programmed Treatment Suggestions: 25 - Evidence Based * Programmable Positions: 300 * Mains Supply Technical Specifications: Power Supply: 100-240 V ± 10% / 50/60 Hz Dimensions (wxdxh) Device: 24 X 32 X 12 Cm Device With Base: 24 X 30.5 X 18.2 Cm Weight: 2 Kg Weight, Including The Optional Battery: 3 Kg" Standard Accessories: * 4-series Operating Instructions (cd Rom) * 4-series Information Booklet * Mains Cable 230v-eur * Mains Cable 230v-eur * Ultrasound Multi-frequency Treatment Head(s) (model Dependent) * Holder Treatment Head (model Dependent) * Contact-gel, Bottle 250 Ml, 1x" Includes: 1 Pc Multi-frequency Treatment Head, Large (5cm2) 1 Pc Multi-frequency Treatment Head, Small (0.8cm2) 2 Pcs Probe Holder Protector 1 Pc Cart Heavy Duty (local) 1 Pc Sonomed Ultrasound Gel (5 Liters) 11. 1 Unit Continous Passive Motion (cpm) Smart Rehabilitation Solution Unit Cost: Php 650,000.00 Features: * Portable Knee Cpm With Smal Size And Light Weight * Adjustable A Length Of Femur And Tibia Position * Progressive Mode: Relieves Pain By Gradual Increment Of Angle Of Rehalibitating Exercise. * Oscillation Mode: Maximizes Its Therapeutic Effect By Repeating Exercise At Each End-angle. * Allows To Select Speed: Uniform/ Accelerated Mode * Easy Operation With Touch Panel And Customized. " Functions: * Speed 1 - 5 Level * Timer 1 - 99 Min. * Count 1 - 99 * Pause 0 - 9 Sec Technical Specifications: * Femoral Size 26 - 45 Cm * Tibia Size 29 - 59 Cm * Motion Range - 10°~ 140° * Speed 75°~ 130°/min * Angle Of Progressive -5°~ 15° * Angle Of Oscillation -5°~ 15° * Count (progressive) 3 - 10 * Count (oscillation) 3 - 10 * Weight 12kg * Dimentions (wxdxh) 360 X 1025 X 500 (mm) * Power Supply 100vac - 240vac, 50/60hz 12. 4 Units Heavy Duty Suction Machine Unit Cost: Php 285,000.00 Features: •piston/cylinder System – Results In Low Working Speed, Quiet, Low Strain On Movable Parts, Minimum Maintenance •rapid Vacuum Build-up •quiet Drive System •precise Vacuum Setting •protection Against Electric Shock Class I Specifications: High Vacuum: -95kpa, -713mmhg High Flow: 40,50,60 L/min Power: 100-240vac, 150w, 60hz Weight – Trolley: 35.3 Lbs Protection Class Ii: With A Protective Earth. Potential Equalization Conductor: Maintains The Difference In Potential At 0, Thus Preventing Any Transfer Of Static Electricity Running Through The Patient Ip21: Protection From Dripping Water Vacuum Gauge: Kpa & Mmhg 13. 10 Units Portable Suction Machine Unit Cost: Php 85,000.00 Specifications: •max. Vacuum: -75 Kpa / -563 Mmhg ± 10% Tolerance •flow: 18 L/min. ± 10% Tolerance •dimensions: 15″ X 6 3/4″ X 11 1/4″ •weight: 8 Lbs •drive Unit: Quatroflex Piston/cylinder Technology •electrical Info •ac/dc: 100 – 240 V | 50 – 60 Hz •power Consumption •ac: 90 W •ac/dc: 80 W •noise Level: 51.2 Db @ 3 Ft •vacuum Regulator: Membrane •protection Against Electric Shock: Type Cf (cardiac Floating: Max. Earth Leaking Current 10 Μa) •medical Device Classification:class Iia •ingress Protection: Ip21 •battery: Nimh •operating Time On Battery: 30 Minutes •charging Time Of Battery: 5 Hours •low Battery Indication: Led And Acoustic •overflow Protection: Disposable Overflow Protection/bacterial Filter 14. 1 Set Laparoscopic Instrument Set Unit Cost: Php 200,000.00 •2 Maryland Dissecting Forceps •2 Grasper Long Tip •2 Grasper Short Tip •2 Shears •2 Hook (electrocoagulation) 15. 7 Units Hydraulic Hospital Stretcher Unit Cost: Php 150,000.00 Features: -the Main Frame Of The Stretcher Is Made Of Electrostatic Plastic Sprayed Galvanized Steel Tube. -the Mattress Platform Is Made Of X-ray Revealed Material. -it Is Equipped With Imported Double Rise-and-fall Hydraulic Pump Systems. 150 Mm Diameter. -dust Proof Castors With International Advanced Central Locking System Make The Stretcher Move Steadily, Reliably And Lightly. -the Stretcher Has The Functions Of Hi-low, Trendelenburg And Reverse Trendelenburg Which Are Controlled By The Treadles Lying At The Two Sides O The Stretcher. -functions Are Supported By Imported Large Hydraulic Pump Which Make The Stretcher Never Swayed. -the Headrest Is Supported By Gas Spring While The Knee Rest Is Controlled By Manual Crank Which Is In The End Part Of The Stretcher. -the Bottom Cover Is Made Of Abs Material And Shaped Once For All Which Can Be Easily Cleaned. The Stretcher Mattress Platform Is Of Separate Structure. -equipped With Infusion Pole, Drainage Hook And Collapsible Stainless Steel Side Rails. -it Is The Best Choice For Emergency Room And Icu Ward For Transferring Patient. -us Hydraulic Pump Size: 204.5 × 79 × 60.5~92 Cm Specification: Packing Dimension: 213.5 X 86.5 X 81.5 Cm Outer Dimensions (side Rails Up): L2095*w800mm（±10mm） Mattress Platform: L1910*w640mm（±10mm） Bed Height: H585-910m（±10mm) Backrest Angle: 0-90° Maximum Thigh Rest: ≥30° Tr/atr: ≥12° Height Of Side Rails(above Mattress Platform): 420mm（±10mm） Safe Working Load: 200kgs 16. 1 Unit Automatic External Defibrillator Unit Cost: Php 146,776.36 (aed) Infants & Children Ecg Monitoring Pulse Oximetry Aed(energy: 200-joues Max.) Manual External Synchronous/asynchronous Defibrillation Description Display: Screen Type: High-resolutiondisplay, Tft Colour Display Screen Size: 7inches (17.7cm) Diagonally Sweep Speed: 5/25/50mm/sec Information: Heart Rate,nibp,spo2,temp,delivered Energy Resolution: 800x480 Aed Voice Promptsand Screen Prompts. Energy Programmable Sequence: 200,300,360 Joules; 150,150,200 Joules; 50, 75, 100 Joules; 30, 30, 50 Joules; Discharge Control: Control On Device Front Panel. Specifications Ecg: Patient Connection: 3-lead Ecg Cable, Or 5-lead Ecg Cable, Paddles. Lead Selection: Displayed On Monitor, Paddles, I, Ii, Iii,avr, Avl, Avf, V. Ecg Size: 2.5,5, 10, 20, 30 Mm/mv Display On Monitor. Heart Rate: 20-350bpm. Protection: With Stand 4000vac/50hz Voltage In Isolation And Work Against Electrosurgical Knife And Defibrillation Nibp Working Mode: Manual/automatic Method: Automatic Oscillation Cuff Type: Standard Adult; Optional Pediatric/neonatal Temp. Measurement Range 0~50℃ Resolution 0.1℃" Pulse Oximetry(spo2) Display: Spo2 Value, Waveform, Pulse Range:0~99%for Adult, Pediatric And Neonatal Patients Probe: Standard Adult Finger Clip Optional Pediatric Y-type Clip And Neonatal Wrap Defibrillator Waveform: Biphasic Defibrillator Type: Manual External Synchronous/asynchronous Defibrillation. Charge Time: Less Than 10 Seconds To 360 Joules Energy Display: Monitor Display Indicates Both Selected And Delivered Energy. Charge Prompt Type: Voice And Visual Prompts. Energy Selection: Selectable At 0, 3, 5, 7, 10, 20, 30, 50, 100, 200, 300, 360 Joules Standard Adult/pediatric Paddles: Reusable External Adult Paddles (pediatric Paddles Integrated) Battery Description Standard Type: Li-ion Battery Li1104c 11.1vdc 4000mah X2 Standard Capacity: Up To 10 Hours Ecg Monitoring Or 60 Full-energy Discharges. Low Battery Indicator: Flashing Low Battery Icon On Display And Bat Indicator On The Panel Of Defi-monitor Be On Recharge Rate: 80% In 3 Hours. 100% In 5 Hours. Built-in Recorder Paper: 50mm Thermal. Printing Method: High-resolution, Thermal Print Head. Record Date, Time ,sweep Speed, Waveform Gain, Heart Rate, Energy (joule) And Ecg Waveform Print Mode Hr Exceed Limits Alarm Recording Auto Timed Recording Real-time Recording Defibrillation Discharge Trigger Recording Power Ac-dc Dual-use: Use The Batteries,ac100v~240v,50/60 Hz. Vehicle Voltage(option): Dc 12v" Main Unit Portable Dimensions:l320xw205xh410 Weight: 7.5kg" 17. 1 Unit Newborn Hearing Screening Machine- Dpoae Screening (single Oae Probe) W/ Patient Data Transfer Program Unit Cost: Php 750,000.00 Dpoae: Distortion Product Otoacoustic Emission • Extra Oae Probe • Laptop • Smart Label Printer • 20 Rolls Of Thermal Paper • Leak Check: Analysis Of Feedback Signal (440 Hz Probe Tone) • Probe Check: Limit Of Maximum Sound Pressure (“stimulus”), Comparison Across Speakers (“symmetry”), Leak Check (“probe Fit”) • Calibration: In-the-ear Calibration With Ear-canal Volume Adjustment • Noise Detection: Narrow Band Noise Around 2f2-f1 • Residual Noise Calculation: Weighted Averaging, Summed Weighting Factors, • Artifact Rejection: Weighted Averaging • Response Detection: F-test, F-value At A Single Point (fsp) • Frequency Ratio F2/f1: 1.22. Sample Rate: 48 Khz (stimulus, Response) Minimum Dpoae Level Criterion: L1 – 70 Db • Measurement Interval: 4096 Samples • Stimulus Modes With Frequency-modulated Dpoae License: Fm = 1.4-1.6 Hz, Modulation Depth = 50 Hz@1 Khz, 100 Hz@4 Khz • Multi-channel Dpoae: Simultaneous Measurement Of Dpoaes At Up To Two F2 Frequencies At A Time • Frequencies F2: 1, 1.5, 2, 3, 4, 5, 6, 8 Khz • Stimulus Level L2: 30 To 65 Db Spl; Step Size: 5 Db • L2/l1 Relation: Automatic Scissor Paradigm: L1 = 0.4 L2 + 39 Db Spl) • Snr Stop Criterion: 6, 9, 12 Db • Factory Defaults: Quick Screen And Standard Screen (5,4,3,2,khz, Overall Stop Criterion 3 Out Of 4, As Fast As Possible, Multichannel, Fmdpoae, 55/65 Db, Snr 6 Db), Manual Retest Option " "additional Features: • Simultaneous Measurement On Left/right Ear – (2 Probes Required) • Entertainment Mode For All Oae Modules Available • Optional Database Software - Data Management Easily View, Archive And Export Test Results • Stores Up To 1000 Patients On The Device • With The Pc-sw Database That Can Transfer Test Results Via Usb • Results Can Be Sorted By Birthdate, Name, Id, Examiner, Date, Time • Export Full-color, 8.5” X 11” Reports In Multiple Formats, With Graphic And Tabular Data, Preset Or Free Comments • Easily Attach Test Results To Patient Records With Many Emr Systems • Patient Demographics On Evice • Noah Compatible Technical Specifications: Device Dimensions: 209 X 98 X 52 Mm, Ca. 500 G, Ca. 475 Display: 240 X 320 Pixel; Graphic Lcd 3.5”, Resistive Touch Screen, Real Time-clock, Piezo-electric Sound Generator, Usb, Output Voltage And Nominal Impedance (headphone Socket): 5 Vpp, 32 Ω Power Consumption: Max. 2 W. Memory Capacity: Up To 1000 Patients, Ca. 1000 Tests (dependent On Test Type). Terms Of Reference: Https://cavite.gov.ph/home/tor-medical-equip-c-b/ Invitation To Bid For This Project Is Also Posted At Www.cavite.gov.ph

Details: Description Section I. Invitation To Bid Invitation To Bid For Rehabilitation Of Diversion Works And Construction Of Protection Works For Dohinob Cis The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-repaircis2025-006 (infra) Project Name : Rehabilitation Of Diversion Works And Construction Of Protection Works For Dohinob Cis Contract Location : Pres. M.a. Roxas, Zamboanga Del Norte Scope Of Works : Rehabilitation Of Diversion Works And Construction Of Protection Works (sta. 0 + 000 – Sta. 0 + 045.3) Left Side Approved Budget For The Contract (abc) : Php 9,562,671.10 Contract Duration : 180 Calendar Days Amount Of Bidding Documents : Php 10,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : October 28 – November 20, 2024 At 8:30 Am Pre-bid Conference : November 8, 2024 At 9:00 Am Submission Of Bids : November 20, 2024 At 8:30 Am Opening Of Bids : November 20, 2024 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting October 28 – November 20, 2024. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 November 2024 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 November 2024 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/unk-ujzz-kkq Opening Of Bids : Https://meet.google.com/gdi-fdbf-gij Any Requests For Additional Information Concerning This Bidding Shall Be Directed To The Following: Marietta M. Cortes Bac Secretariat Head, Nia-regional Office Regional Center Ix, Balintawak, Pagadian City, Zambo. Sur Niaregion9bac@gmail.com 09630884373 – Office Number Date Posted: August 1, 2024 (sgd) Antonio B. Gujeling Bac Chairperson 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation & Flood Control To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Experienced In Diversion Dam Construction. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Diversion Dam Construction. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Backhoe 0.45 - 1 Cu.m 1 Backhoe W/ Vibro Hammer 1 Cu.m 1 Cargo Truck 8 Tonner 1 Dumptruck 10 Cu.m 2 Concrete Mixer 1 – Bagger 2 Water Pump 4” Ø 2 Water Pump 6” Ø 2 Concrete Vibrator 5 Hp 1 Survey Instrument 1 Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Backhoe 0.45 - 1 Cu.m 1 Cargo Truck 8 Tonner 1 Dumptruck 10 Cu.m 1 Survey Instrument 1 The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit A. Rehabilitation Of Diversion Works Class B Concrete, 16.56 Mpa 29.22 Cu.m B. Protection Works Structure Excavation (mechanized) 136.20 Cu.m Structure Backfill (mechanized) 143.44 Cu.m Selected Earthfill (with Compaction) 430.28 Cu.m Filter Drain 13.84 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 6,552.70 Kg Class A Concrete, 20.76 Mpa 149.95 Cu.m Supply & Delivery Of Steel Sheet Pile (0.1 X 0.4 X 6m) 100 Pc Steel Sheet Pile Installation (0.1 X 0.4 X 6m) 600 Ln.m Cofferdamming & Care Of River 1 Ls C. Project Billboard 1 Ls D. Temporary Works, Mobilization And Demobilization 1 Ls E. Occupational Construction Safety And Health Program 1 Ls

Details: Description Rfq No. 2024–11–016d Request For Quotation (rfq) Ministry Of Public Works Bangsamoro Autonomous Region In Muslim Mindanao Sir/madam: Please Quote Your Price For The Article Described Below With The Request That The Condition Or Requirement To Be Complied With An Approved Budget For The Contract (abc) In The Amount Of Php 946,391.25. You Are Hereby Invited To Submit Your Price Quotation On Or Before November 25, 2024, 5:00 P.m. Failure To Submit Means Disqualification. Purpose: To Be Used On Day-to-day Preparation Of Plans And Architectural Design. Item Qty. Unit Title/description Specification Supply And Delivery Of Desktop And Laptop For Mpw-barmm, Regional Office Under Co Fy-2023 1 2 Units Desktop Central Processing Unit A. Model – Core I7 (12700) B. Cores – 12 C. No. Of Performance Cores – 8 D. No. Of Efficient Cores – 4 E. Total Threads – 20 F. Max Turbo Frequency – 4.90 Ghz G. Turbo Boost Max Technology 3.0 Frequency – 4.90 Ghz H. Performance-core Max Turbo Frequency – 4.80ghz I. Efficient-core Max Turbo Frequency – 3.60 Ghz J. Performance-core Base Frequency – 2.10 Ghz K. Efficient-core Base Frequency – 1.60 Ghz L. Cache – 25 Mb Smart Cache M. Processor Base Power – 64 W N. Maximum Turbo Power – 180 W Storage – 1tb (nvme M.2) Ram – 32gb (2x16gb) 3200mhz Ddr4 Psu – 750 W 80+ Gold Monitor – 165hz Ips 24.5” Ups – 650va Ups Os – Windows 11 Pro Antivirus – Anti-malware Software Full Version (high-end Brand) Graphics Processing Unit A. Model - Rtx 3070 B. Interface – Pci Express Gen 4 C. Core Clocks – Boost: 1800 Mhz D. Cuda Cores – 6144 Units E. Memory Speed – 19 Gbps F. Memory – 8gb Gddr6x G. Memory Bus – 256-bit H. Output – Display Port X 3 (v1.4a), Hdmi X 1 (supports 4k@120hz As Specified In Hdmi 2.1) I. Hdcp Support – Yes J. Power Consumption – 290 W K. Power Connectors – 8-pin X 2 L. Recommended Psu – 750 W M. Card Dimension (mm) – 305 X 120 X 57 Mm N. Weight (card/package) – 1160g/1735g O. Directx Version Support – 12 Api P. Opengl Version Support – 4.6 Q. Maximum Display – 4 R. Vr Ready – Yes S. G-sync Technology – Yes T. Adaptive Vertical Sync – Yes U. Digital Maximum Resolution -7680 X 4320 Motherboard A. Cpu – Support 14th / 13th / 12th Gen Processors B. Memory – 4x Ddr4, Maximum Memory Capacity 128gb, Memory Support 5333(oc)/ 5200(oc)/ 5066(oc)/ 5000(oc)/ 4800(oc)/ 4600(oc)/ 4400(oc)/ 4266(oc)/ 4200(oc)/ 4000(oc)/ 3800(oc)/ 3733(oc)/ 3600(oc)/3466(oc)/ 3400(oc)/ 3333(oc)/ 3200(jedec)/ 2933(jedec)/ 2666(jedec)/ 2400(jedec)/ 2133(jedec) Max. Overclocking Frequency: 1dpc 1r Max Speed Up To 5333+ Mhz 1dpc 2r Max Speed Up To 4800+ Mhz 2dpc 1r Max Speed Up To 4400+ Mhz 2dpc 2r Max Speed Up To 4000+ Mhz Supports Dual-channel Mode Supports Non-ecc, Un-buffered Memory Supports Extreme Memory Profile. C. Onboard Graphics – 1x Hdmi, Support Hdmi 2.1, Maximum Resolution Of 4k 60hz, 1x Displayport, Support Dp 1.4, Max. Resolution Of 4k 60hz D. Slot – 5x Pci-e X16 Slot Pci_e1 Gen Pcie 4.0 Supports Up To X16 (from Cpu), Pci_e2 Gen Pcie 3.0 Supports Up To X1 (from Chipset) Pci_e3 Gen Pcie 4.0 Supports Up To X4 (from Chipset) Pci_e4 Gen Pcie 3.0 Supports Up To X1 (from Chipset) Pci_e5 Gen Pcie 3.0 Supports Up To X1 (from Chipset) E. Storage - 2x M.2 M.2_1 Source (from Cpu) Supports Up To Pcie 4.0 X4, Supports 22110/2280/2260/2242 Devices M.2_2 Source (from Chipset) Supports Up To Pcie 4.0 X4 / Sata Mode, Supports 2280/2260/2242 Devices 4x Sata 6g F. Raid – Supports Raid 0, Raid 1, Raid 5 And Raid 10 For Sata Storage Devices G. Usb – 4x Usb 2.0 (rear), 4x Usb 2.0 (front), 2x Usb 5gbps Type A (front), 1x Usb 5gbps Type C (front), 2x Usb 10gpbs Type A (rear), 1x Usb 10gpbs Type C (rear). H. Lan – 2.5g Lan I. Wireless Lan & Bluetooth – Wi-fi 6e, The Wireless Module Is Pre-installed In The M.2 (key-e) Slot, Supports Mu-mimo Tx/rx, 2.4ghz/5ghz/6ghz (160mhz) Up To 2.4gpbs, Supports 802.11 A/b/g/n/ac/ax, Supports Bluetooth 5.3 Fips, Fisma. J. Audio – 7.1-channel High Definition Audio Supports S/pdif Output. K. Internal Io - 1x Power Connector (atx_pwr) 2x Power Connector (cpu_pwr) 1x Cpu Fan 1x Pump Fan 5x System Fan 2x Front Panel (jfp) 1x Chassis Intrusion (jci) 1x Front Audio (jaud) 1x Printer Port (jlpt) 1x Com Port (jcom) 1x Tbt Connector (jtbt, Supports Rtd3) 2x Addressable V2 Rgb Led Connector (jargb_v2) 1x Rgb Led Connector(jrgb) 1x Tpm Pin Header(support Tpm 2.0) 4x Usb 2.0 Ports 2x Usb 5gbps Type A Ports 1x Usb 5gpbs Type C Ports L. Led Feature – 4x Ez Debug Led Mouse A. Wireless B. Size: 124.8x63.4x39.9mm C. Weight: 90g±2g D. Switch: Huano Blue E. Sensor: Pwm 3325 F. Cable: Paracord Type C Max G. Dpi: 10,000 Dpi H. Default Dpi: 800/1600/2400/3600/5000/10000 I. Ips: 100ips J. Acceleration: 20g K. Polling Rate: 125hz/250hz/500hz(default)/1000hz L. Interface: Usb 2.0 M. Battery Type: Li-ion N. Battery Capacity: 400mah Keyboard A. Connectivity – Usb 2.0 (type C To Type A) B. Size (full/tkl) – 100% C. Lightning – 5-zone Rgb D. Aura Sync – Yes E. Anti-ghosting – 19 Keys-rollover F. Macro Keys – Yes G. Usb Report Rate – 1000 Hz H. Profile Hot Keys – Yes I. Lightning Effect Hot Keys – Yes J. Brightness Setting Hot Keys – Yes K. Color Setting Hot Keys – Yes L. Clear On-board Hot Keys – Yes M. Macro Hot Keys – Yes N. Media Hot Keys – Yes O. Cable – 1.8 M Rubber Cable P. Os – Windows 10/11 Q. Software – Armoury Crate R. Dimensions - Keyboard: 451 X 155 X 36 Mm, Wrist Rest: 451 X 66 X 18 Mm. S. Weight - Keyboard: 810g, Wrist Rest: 95g" T. Color – Black Full Tower Casing A. High Airflow Pc Case With Chassis Fan B. Power Supply Support Bottom Mount C. Motherboard Support Ssi Eeb D. Fan Support Front 2x 200mm E. Materials Left Side Panel Tempered Glass F. Materials Left Side Panel Steel G. I/o Panel – Usb Ports 1x Usb 3.2 Gen Type C H. Materials – Exterior Steel I. I/o Panel – Audio In / Out 1x 3.5mm 4 Poles Audio Jack J. Dust Filter – Bottom K. Power Supply Support Atx L. Motherboard Supports Ceb M. Motherboard Support Itx N. Cable Routing – Behind Motherboard Cpu Cooling - Mirror Argb Close Loop Aio Cpu Liquid Cooler, Mirror Argb Pump 360mm. Other Peripherals - High Quality Headset - High Resolution Webcam - Mousepad 2 10 Units Laptop Processor: Amd 5 5625u (6-core, 12-thread, Up To 4.3 Ghz) Graphics: Integrated Amd Radeon Graphics Memory (ram): 16gb Lpddr4x Storage: 1tb Pcie 3.0 Nvme Ssd Display: 14-inch Oled, 2.8k (2880 X 1800) Resolution, 16:10 Aspect Ratio, 90hz Refresh Rate, 0.2ms Response Time, 100% Dci-p3 Color Gamut, 400-nit Brightness, Vesa Displayhdr True Black 500, Pantone Validated Battery: 75wh, Up To 10-15 Hours Of Battery Life Operating System: Windows 11 Home Audio: Harman Kardon-certified Stereo Speakers, Dolby Atmos Support Keyboard: Backlit With A 1.4mm Key Travel Camera: 720p Hd Ir Camera With Windows Hello Connectivity: -2 X Usb-c 3.2 Gen 2 (supports Power Delivery And Display Output) -1 X Usb-a 3.2 Gen 2 -1 X Hdmi 2.0b -1 X Microsd Card Reader -1 X 3.5mm Audio Combo Jack Wireless: Wi-fi 6e (802.11ax), Bluetooth 5.2 Build: Metal Chassis, Weight Approximately 1.39 Kg Color: Jade Black *****nothing Follows***** Other Terms And Conditions: • Delivery Of The Unit Is Required Within Thirty (30) Calendar Days Upon The Date Of Receipt Of Purchase Order; • Specify The Brand And Model, Including The Pictures Or Brochure Of Unit/item Offer; • All Unit/item Offer Shall Endure Minimum Of 1-year Warranty Period For All Parts And Labor; • All Unit/item Offer Shall Endure 7 Days Replacement For Factory Defect Conditions; To Specify The Brand Or Trade Mark And Other Pertinent Date Of Your Product Articles 1. To Quote The Price Of The Articles Actually Verified And Found Of Your Store. 2. To Deliver The Articles To The Office Of The Mpw-barmm Regional Office, Barmm Compound, Cotabato City Within 30 Days From The Receipt Of The Purchase Award. 3. To Submit The Price Quotation Form (pqf) Annex A, On Or Before November 25, 2024, 5:00 P.m. 4. To Accept The Flag Law And Others Laws (foreign Only). 5. To Participate As Bonafide Dealer. 6. This Business Is Duly Licensed And Permitted By The Government.