Pumps Tenders

Description: CATEGORY: Cap Hyd for SSL BOB CAT with Cat Part No 6727475 , Filter Oil for SSL BOB CAT with Cat Part No 6675517 , Fuel Filter for SSL BOB CAT with Cat Part No 6667352 , Hyd Element for SSL BOB CAT with Cat Part No 7024037 , Hose for Size IV Dozer With Cat Part No 67185H , Hose Water for Size IV Dozer With Cat Part No 505062 , Hose Water Seprator for Size IV Dozer With Cat Part No HS1011200SS , Hose water Seprator To Filter Fuel for Size IV Dozer With Cat Part No HS1002100SS , Toogal Swich for Size IV Dozer With Cat Part No 500278 , Indicator Light for Size IV Dozer With Cat Part No 501115 , Pressuer Gauge Fuel for Size IV Dozer With Cat Part No 500419 , Hose for Size IV Dozer With Cat Part No HS0400900MS , Negative Terminal for Size IV Dozer With Cat Part No 26101337 , Belt Alternator for Size IV Dozer With Cat Part No , Positive Terminal for Size IV Dozer With Cat Part No 26101327 , Positive Brush Connector for Size IV Dozer With Cat Part No 9030101 , Negative Brush Connector for Size IV Dozer With Cat Part No 903071 , Brush for Size IV Dozer With Cat Part No 9030644A , Split Pin for Size IV Dozer With Cat Part No 9030837 , Key Swich for Size IV Dozer With Cat Part No 070502000000 , Warming Lamp for Size IV Dozer With Cat Part No 610300030001 , Dash Lamp for Size IV Dozer With Cat Part No 070G03000000 , Rear Lamp for Size IV Dozer With Cat Part No 310800021400 , Front Head Lamp for Size IV Dozer With Cat Part No 310800021400 , Light Unit for Size IV Dozer With Cat Part No 26570021 , Cable and Bulb Holder for Size IV Dozer With Cat Part No 26840069 , Ammeter for Size IV Dozer With Cat Part No 071001502020 , Stainer for Size IV Dozer With Cat Part No 1300411120 , Hose for Size IV Dozer With Cat Part No HS0406000SS , Hose for Size IV Dozer With Cat Part No HS0402000SS , O Ring for Size IV Dozer With Cat Part No 0700003135 , Filter Oil for Size IV Dozer With Cat Part No 1301045111 , Hose Oil Pump to main Clutch Case for Size IV Dozer With Cat Part No 0726003216 , Stainer for Size IV Dozer With Cat Part No 1306013260 , Hose for Size IV Dozer With Cat Part No 0726003210 , Hyd Filter for JCB with Cat Part No 40 or 300893 , Throtal Cable for JCB with Cat Part No 332 or Y3852 , Fuel Filter for JCB with Cat Part No 02 or 910930 , Water Separator for JCB with Cat Part No 33 or Y2490 , Oil Filter for JCB with Cat Part No 02 or 910140A , Hyd Filter for JCB with Cat Part No 02 or 910155A , Hose Hyd for JCB with Cat Part No 625 or 80002 , Air Filter for JCB with Cat Part No 335 or Y2811 , Fuel Stainer for JCB with Cat Part No 332 or Y3299 , Side Cutter L for JCB with Cat Part No 40 or 303376 , Washer for JCB with Cat Part No 980 or 84768 , Hyd Filter 2nd for JCB with Cat Part No 335 or C7872 , Air Cleaner for JCB with Cat Part No 334 or Y2810 , Belt for JCB with Cat Part No 6009 or 3827Z , Nut for JCB with Cat Part No 173R020V2 , Belt for JCB with Cat Part No 6009 or 38262 , Cap Radiator for JCB with Cat Part No 332 or Y4005 , Climp Hose for JCB with Cat Part No 332 or Y3292 , Head Lub Oil Filter for JCB with Cat Part No 2910985 , Side Cutter R for JCB with Cat Part No 40 or 303377 , Tooth Bocket for JCB with Cat Part No 40 or 303603 , Bolt for JCB with Cat Part No 13050 or 0716Z , Nut for JCB with Cat Part No 1340 or 0701Z , Air Filter Outer for JCB with Cat Part No 32 or 915802 , Air Filer Inner for JCB with Cat Part No 32 or 915801 , Engine Oil Filter for JCB with Cat Part No 320 or 04134 , Fuel Filter for JCB with Cat Part No 320 or 070394

Description: Combined Synopsis/solicitation #: N0017825q6620 submitted By: Susan Madison naics Code: 334515 fsc/psc Code: 6650 anticipated Date To Be Published In Sam.gov: 06 November 2024 anticipated Closing Date: 15 November 2024 contracts Poc Name: Susan Madison telephone#: (540) 613-3296 email Address: Susan.h.madison.civ@us.navy.mil code And Description: 6650 – Optical Instruments Test Equipment, Components And Accessories this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. synopsis/solicitation N0017825q6620 Is Issued As A Request For Quotation (rfq). The Synopsis/solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through The Federal Acquisition Regulation As Indicated In The Attached Sf1449. The Sf1449 Form Is Being Utilized To Generate The Applicable Clauses From The Standard Procurement System. this Requirement Is Not Eligible For Small Business Set-aside. material Must Be Taa Compliant. the Naval Surface Warfare Center Dahlgren Division (nswcdd) Intends To Award On A Sole Source Basis For The Below Reflectometer With The Noted Options And Services Manufactured By Ultra Fast Innovations In Accordance With The Attached Statement Of Work (sow). Ultra Fast Innovations Is Located In Garching, Germany. quantity Item Description 1 Glacier-c 640-1100/1200-2000 Ultrafast Innovations Precision Cavity Ringdown Reflectometer. Output Spectrum 640-1100 Nm And 1200-2000 Nm. 99.995% Reflectance Measurement At 1080 Nm And 99.999% Reflectance Measurement At 640 Nm And 1645 Nm. 5-45 Degrees Angles Of I Incidence. 1 2” Reflectance Custom Sample Holder Additional Mount For 2” Optics 1 1” Transmission Rotation Custom Sample Holder Additional Rotational Mount For 1” Optics 1 1064 Nm Suppression Filter Filter To Suppress Pump Wavelength the Contractor Shall Unpack, Install, And Qualify The System At The Nswcdd Location In Accordance With 3.2 Of The Sow. the Contractor Shall Provide One Full Day Of Installation And On-site Instrument Instruction In Accordance With 3.3 Of The Sow. the Contractor Shall Provide Training On Software And Use Of The System After The Installation Is Complete In Accordance With 3.3.1 Of The Attached Sow. the Contractor Shall Coordinate With The Technical Point Of Contact (tpoc) Identified Below To Complete This Work After Issuance Of The Purchase Order In Accordance With 3.4 Of The Sow. all Travel Cost Shall Be In Accordance With The Joint Travel Regulations And Shall Be Provided On A Separate Clin. The Offeror Shall Ensure They Can Provide The Reflectometer And Services Outlined In The Sow. ultra Fast Innovations Is The Only Commercial System Meets Requirements Of Measuring Losses Of 5-1000 Parts Per Million, And For Wavelength Operation And Tuning Which Are 640-1100nm And 1200-2000nm Using A Supercontinuum Source. Ultrafast Innovations Owns The Patent For Using A Supercontinuum Source For Cavity Ring Down Measurements, Us 11,821,840 B2. please Include Shipping/freight Cost To Dahlgren, Va 22448-5114. Simplified Acquisition Procedures (sap) Will Be Utilized For Award In Accordance With Far Part 13. The Order Shall Be Firm Fixed Price. all Responsible Offerors Must Submit, With Its Offer, The Representation Required In Paragraph (c) Of Far Solicitation Provision 52.212-3. Offerors Must Complete The Following Representations When The Resulting Contract Is For Supplies To Be Delivered Or Services To Be Performed In The United States Or Its Outlying Areas, Or When The Contracting Officer Has Applied Far Part 19. All Offerors May Submit A Capability Statement, Proposal, Or Quotation Which Shall Be Considered By The Agency. The Completion And Submission To The Government Of An Offer Shall Indicate The Offeror’s Unconditional Agreement To The Terms And Conditions In This Solicitation. Offers May Be Rejected If An Exception To The Terms Or Conditions Set Forth In This Solicitation Is Taken. at Time Of Proposal Submission Please Submit Any Historical Data And Published Pricing. Award Will Be Made Based On Lowest Price Technically Acceptable. in Order To Be Eligible For Award, Firms Must Be Registered In The System For Award Management (sam). Offerors May Obtain Information On Registration In Sam By Calling 866-606-8220, Or Via The Internet At Https://www.sam.gov. quote Is Due 15 November, No Later Than 12:00 P.m. Est With An Anticipated Award Date By 3 December 2024. Questions And Responses Regarding This Synopsis/solicitation May Be Submitted By E-mail To Susan.h.madison.civ@us.navy.mil To The Rfq Closing. Please Be Sure To Include Synopsis/solicitation Number N0017825q6620 In The Subject Line. attachments – -sf1449: Solicitation For Commercial Items - Sow

Description: CATEGORY: SEAL KIT FOR OIL DISTRIBUTOR ONE RING TYPE TO DRG NO CAT PART NO 5330396077 , SEAL KIT FOR OIL DISTRIBUTOR TWO RING TYPE TO DRG NO CAT PART NO 5330396076 , DELIVERY HOSE TO DRG NO HOSE EN856 4SH SPRING GUARD , FILTER ELEMENT FOR TSW 310 25G B P G 6 01 E4 0 25P TO DRG NO FILTER ELEMENT 01TS31025GB , FILTER ELEMENT MF1801A10HBP01 FOR RLF MPF1811AG8A10HBP01 TE40A300 TO DRG NO FILTER ELEMENT MF1801A10HBP01 , FILTER ELEMENT 2 32H10LLP FOR PRESSURE LINE FILTER 400L32H10RMV4 4GP TO DRG NO FILTER ELEMENT 2 32H10LLP , FILTER ELEMENT 2 225H6P FOR PRESSURE LINE FILTER 25L225H6RMV4 4GP TO DRG NO FILTER ELEMENT 2 225H6P , SET OF SEALS FOR PUMP SIDE MODULE PVB32 157B5999 AND PVB32 157B6999 FOR PVG 32 VALVE TO DRG NO PVB32 157B5999 AND PVB32 157B6999 , ELECTRICAL ACTIVATION PVES 32 157B4832 FOR PVG 32 VALVE 1 AND 2 COMBINED 83036766 TO DRG NO PVES 32 157B4832 , BASIC MODULE PVB 32 157B6233 FOR PVG 32 VALVE 1 AND 2 COMBINED 83036766 TO DRG NO PVB32 157B6233 , SEALL KIT ELECTRICAL SIDE MODULE PVE 32 157B4997 AND SEAL KIT FOR LEVER SIDE MODULE TO DRG NO PVE32 157B4997 AND PVE BY PVMD32 157B , MECHANICAL ACTIVATION PVM 32 157B3171 FOR PVG 32 VALVE 1 AND 2 COMBINED 83036766 TO DRG NO PVM32 157B3171 , O RING ID 16 30 X CSD 2 40 TO DRG NO ID 16 DOT30XCSD 2 DOT40 , O RING ID 12 X CSD 2 TO DRG NO ID 12XCSD 2 , O RING ID 7 5 X CSD 1 5 TO DRG NO ID 7 DOT 5XCSD 1 DOT 5 , O RING ID 25 30 X CSD 2 40 TO DRG NO ID 25 DOT30XCSD 2 DOT 40 , ELASTOMERIC SEAL 3 BAR 4 BSP FOR PARALLEL MALE STUD COUPLING CP 20 SR TO DRG NO ELASTOMERIC SEAL THREE FOURTH INCH BSP , ELASTOMERIC SEAL HALF INCH BSP FOR MALE STUD COUPLING HALF INCH X16 GE16WSG04E TO DRG NO ELASTOMERIC SEAL HALF INCH BSP , ELASTOMERIC SEAL ONE FOURTH INCH BSP FOR PARALLEL MALE STUD COUPLING ONE FOURTH INCH 10 GE10WSG02E TO DRG NO ELASTOMERIC SEAL ONE FOURTH INCH BSP , ELASTOMERIC SEAL 1 INCH BSP FOR CHECK VALVE S 20 A 1 0 TO DRG NO ELASTOMERIC SEAL 1 INCH BSP , SEAL KIT FOR CYLINDER NO 1 PL NO 55 BAR 9 TO 55 BAR 17 AND 55 BAR 26 AS PER ISPL 2022 TO DRG NO SEAL KIT CYLINDER NO 1 , SEAL KIT FOR CYLINDER NO 2 PL NO 57 BAR 9 TO 57 BAR17 AS PER ISPL 2022 TO DRG NO SEAL KIT CYLINDER NO 2 , SEAL KIT FOR CYLINDER NO 3A AND 3B PL NO 59 BAR 19 TO 59 BAR 30 AS PER ISPL 2022 TO DRG NO SEAL KIT CYLINDER NO 3A AND 3B , SEAL KIT FOR LOCKING CYLINDER PL NO 65 BAR 5 TO 65 BAR 10 AS PER ISPL 2022 TO DRG NO SEAL KIT LOCKING CYLINDER , SEAL KIT FOR PUSHING CYLINDER PL NO 63 BAR 5 TO 63 BAR 10 AS PER ISPL 2022 TO DRG NO SEAL KIT PUSHING CYLINDER

Details: Fy23 Missile Assembly Support Building Tactical Equipment Maintenace Facility (temf), White Sands Missile Range (wsmr), Dona Ana County, New Mexico the Proposed Procurement Is An Unrestricted, Open To Both Large And Small Businesses, Lowest Price Technically Acceptable (lpta) Request For Proposal (rfp). Naics Is 236220, With A Size Standard Of $45,000,000.00. The Magnitude Of Construction For This Project Will Be Between $25,000,000.00 And $100,000,000.00. Bonding Will Be Required For This Acquisition. Offerors Attention Is Directed To Section 00 21 00 In The Solicitation For Information Regarding The Tour Of The Site. Plans Will Be Issued On Or About 06 January 2025, With Proposals Due On Or About 20 February 2025. Offerors Are Advised That This Requirement May Be Delayed, Cancelled, Or Revised At Any Time During The Solicitation, Or Final Award Process. the Project Consists Of Construction Of A Launcher Maintenance, Missile Assembly Support Facility At White Sands Missile Range, New Mexico. The Project Includes An 18,800 S.f. Vehicle Maintenance Facility Including Maintenance Bays, Wash Bay, Repair Bays, Machine Shop/welding Area, Maintenance Pit, Training Rooms, Offices, And Security Vaults. Facility Includes 2,300 S.y. Tactical Organizational Vehicle Parking And Apron, Petroleum And Hazardous Waste Storage Buildings, Cybersecurity And Antiterrorism/force Protection (at/fp) Measures, Building Information Systems, Fire Protection And Alarm Systems, Lightning Protection And Grounding System, Intrusion Detection System (ids), Electronic Access Control System (acs), Energy Monitoring Control Systems (emcs) Connection, Vehicle Exhaust System, Petroleum Oil And Lubricants (pol) Distribution Systems, And A 10-ton Bridge Crane. Sustainability And Energy Enhancement Measures Are Included. Photovoltaic Power Will Be Provided By Two Parking Structure Roof-top Arrays And Two Roof-top Arrays On The Vehicle Maintenance Building. Supporting Facilities Include Site Development, Utilities And Connections, Storm Drainage, Paving, Parking, Walkways, Lighting, Information Systems, Landscaping, And Signage. Heating Will Include A Hot Water Heating System With High Efficiency Boiler, Pumps, And Piping Distribution. Cooling Will Be Provided By A Direct Expansion (dx) Based Cooling System With High Efficiency Air-cooled Condensing Units. Maintenance Bays Will Be Cooled By High Efficiency Evaporative Cooling Units And Heated By A Low Intensity Infrared Radiant Heating System. Measures In Accordance With The Department Of Defense (dod) Minimum Antiterrorism For Buildings Standards Will Be Provided. Comprehensive Building And Furnishings Related Interior Design Services Are Required. Access For Individuals With Disabilities Will Be Provided As Appropriate. Facilities Will Be Designed To A Minimum Life Of 40 Years In Accordance With Dod’s Unified Facilities Criteria (ufc 1-200-02) Including Energy Efficiencies, Building Envelope And Integrated Building Systems Performance. The Facility Will Be Designed And Constructed To Achieve Leed Silver Certification. the Project Will Be Advertised As A Request For Proposal. Competitive Proposals Will Be Evaluated Based On The Evaluation Criteria Set Forth In The Solicitation Package. Evaluation By The Government Will Result In Selection Of A Firm That Represents The Best Value To The Government. The Proposed Procurement Will Result In A Firm-fixed Price Contract. Offerors Must Be Registered With System For Award Management (sam), In Order To Receive A Government Contract Award. To Register, The Sam Internet Address Is: Https://sam.gov/content/home. this Solicitation Will Be Issued Via Internet Only. Notification Of Amendments Shall Be Made Via Internet Only, As Well. It Is Therefore The Contractors’ Responsibility To Check The Following Address Daily For Any Posted Changes To This Solicitation. For Security Reasons, All Technical And Engineering Data Related To This Solicitation Will Be Distributed Using The Sam.gov System. Sam.gov Is A Web-based Dissemination Tool Designed To Safeguard Acquisition-related Information For All Federal Agencies. Interested Offerors Must Register With Sam.gov Or They Will Not Be Able To Download Information From The Site. Registration Instructions Can Be Found On The Website At Https://sam.gov/content/home. Contractors Registered With Sam.gov May View And/or Download This Solicitation And All Amendments From The Internet After Solicitation Issuance. Offerors Are Encouraged To Post Notices Of Prospective Subcontracting Opportunities On The Website. Offerors Are Advised That This Requirement May Be Delayed, Cancelled, Or Revised At Any Time During The Solicitation, Or Final Award Process.

Details: Legal Notice To Bidders Sealed Bids For The Construction Of Fairhaven Raw Water Well Replacement Project, Will Be Received By The City Of Olive Branch At 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654 Until 2:00 P.m. Local Time On Monday, January 13, 2025, And Thereafter Will Be Opened And Publicly Read. The Project Consists Generally Of The Construction Of One 1,000 Gallon Per Minute Raw Groundwater Supply Well, Including All Drilling, Test Holes, Raw Water Analysis, Reaming, Casings, Screen, Gravel Wall, Well Development, Well Testing, Well Cleaning, Cctv Inspection, Construction Of Pump Foundation, Well Pump, Discharge Head, Column Assembly, Shafts, Suction Pipe, Electric Motor, Water Level Indicator, Pressure Gauge, Discharge Piping, Check Valves, Flow Meter, Gate Valves, Insulation, Connection To The Existing Raw Water Line, Painting, Electrical And Controls, Site Work, Fencing, Site Restoration, Final Cleaning, And All Other Necessary And Appurtenant Work Required To Complete The Work As Described In These Specifications And Detailed In The Drawings. A Non-mandatory Pre-bid Meeting Will Be Held At 2:00 P.m. On Monday, January 6, 2025, In The 1st Floor Conference Room Of City Hall Located At 9200 Pigeon Roost Road, Olive Branch, Mississippi. Plans, Specifications And Contract Documents May Be Picked Up At The Office Of Karen Mcneil, Purchasing Manager, 9200 Pigeon Roost Road, Olive Branch, Mississippi (662-892-9208) Or Via Email At Karen.mcneil@obms.us. In Addition, Official Bid Documents Can Be Downloaded From Central Bidding At Www.centralbidding.com. Electronic Bids Can Be Submitted At Www.centralbidding.com. Electronic Bids Are Due The Same Time And Date As Sealed Bids. For Any Questions Relating To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. Each Bid Must Be Submitted In A Sealed Envelope, Addressed To The City Clerk, City Of Olive Branch, 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654. Each Envelope Must Be Plainly Marked On The Outside As “re-bid Fairhaven Raw Water Well Replacement Project” And Must Bear On The Outside The Date The Bid Is To Be Opened. Opened Bids Will Be Presented For Consideration At A Regular Meeting Of The Mayor And Board Of Aldermen Of The City Of Olive Branch. Each Bid Shall Be Accompanied By A Bidder’s Bond Issued By A Surety Company Licensed To Operate In The State Of Mississippi, In The Amount Of 5% Of The Total Bid Price, As A Guarantee That If The Bid Is Accepted, The Bidder Will Enter Into A Contract And Execute The Performance And Payment Bonds In The Form And Within The Time Specified. The Successful Bidder Will Be Required To Execute A Performance Bond And A Payment Bond, Each In The Amount Of 100% Of The Contract, Issued By A Surety Company Licensed To Operate In The State Of Mississippi And Shall Be Named In The Current List Of "companies Holding Certificates Of Authority As Acceptable Sureties On Federal Bonds And As Acceptable Reinsuring Companies" As Published In Circular 570 (amended) By The Audit Staff Bureau Of Accounts, U.s. Treasury Department. Each Bidder Shall Have A Certificate Of Responsibility To Bid On Contracts For Public Projects In Which The Bid Price Exceeds $50,000.00 And For Private Projects In Which The Bid Price Exceeds $100,000.00 As Required By The Laws Of The State Of Mississippi. Each Bidder Shall Show On The Outside Of The Envelope Containing His Bid: His Current Certificate Of Responsibility Number And Expiration Date Or If Applicable, A Statement Certifying That The Bid Enclosed Does Not Exceed $50,000.00 For A Public Project Or $100,000.00 For A Private Project. Failure To Show These Items On The Outside Of The Envelope Containing The Bid Will Result In The Bid Being Returned To Bidder Unopened. No Bidder May Withdraw His Bid For A Period Of Sixty (60) Days After Date Of Actual Bid Opening, Without The Owner's Consent. The City Of Olive Branch Reserves The Right To Reject Any Or All Bids In Whole Or In Part, With Or Without Cause; And To Accept The Lowest Bid Which In Its Judgment Will Be For The Best Interest Of The City Of Olive Branch. Witness My Signature This The 19th Day Of November, 2024. /s/ Tena Stewart, City Clerk

Details: Description The Bids And Awards Committee (bac) Of The Lgu-lubang, Occidental Mindoro Invites Contractors To Bid For The Aforementioned Project: Contract I.d.: Ml-2025-02-2 Contract Name: Improvement Of Binakas Water System (latag Water Source) Contract Location: Brgy. Binakas, Lubang, Occidental Mindoro Specification: Project Billboard / Signboard, Occupational Safety And Health Program, Mobilization / Demobilization, Drilling And Installation Of Submersible Pump Approved Budget Of The Contract: Php 2,180,000.00 Delivery Period: 60 Cd Source Of Funds1: 20% Development Fund Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Lubang Now Invites Bids For Improvement Of Binakas Water System (latag Water Source).2 The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of The Instruction To Bidders. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents January 7 - 27, 2025 Pre-bid Conference January 14, 2025 Submission And Receipt Of Bids January 27, 2025, 12:00 Pm Place And Time For Opening Of Bids January 27, 2025, 2:00 Pm @ Municipal Conference Hall Interested Bidders May Obtain Further Information From Municipality Of Lubang And Purchased The Bidding Documents At The Address Given Below. The Pre-bid Conference Is Open To All Interested Parties. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Acceptable For The Contract. The Municipality Of Lubang Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description Qty Description 15 Engine • Engine Type: Four Stroke, Spark Ignition Engine • Bone X Stroke (mm): 67x67 • Engine Displacement (cc): 236.2 • Compression Ratio: 9.7 ± 1:1 • Idling Speed: 1400 ± 300 • Max. Net Power: 8.00 Kw @ 4500 ±250 As Per Is:14599 • Max. Net Torque: 20.1 N-m @ 3500 ±250 As Per Is: 14599 • Spark Plug: Bosch Urocc, Champion Rg6hcc • Spark Plug Gap, Mm: 0.6 To 0.7 • Lubrication: Pressurised Lubrication By Separate Oil Pump • Transmission: 4 Forward + 1 Reverse • Max. Speed: 60kmph • Min. Turning Radius: 3240mm Framework • Front Tire Pressure: 34 Psi (2.4 Kg/cm2) • Rear Tire Pressure: 58 Psi (4.0 Kg/cm2) • Front Tire Size: 4.5x10” • Rear Tire Size: 4.5x 10” • Front / Rear Brake: Drum / Drum (200) Electrical • System: 12v Dc • Head Lamp: 35/35 W • Position Pilot Lamp: 5 W • Stop Lamp/tail Lamp: 21/5 W • Turn Signal Lamp: 10 W • Neutral Indicator Lamp: Available (2w) • High Beam Indicator Lamp: Available (2w) • Turn Pilot Indicator Lamp: Available (2w) • Speedometer Lamp: Available (2w) • Fuel Meter Lamp: Available (2w) • Hom: 12v Dc, Type 2a • Battery: 12v, Type 32ah Dimensions • Length: 3230 Mm • Width 1486 Mm • Height 1818 Mm • Wheel Base: 2125 Mm • Ground Clearance: 180 Mm • Vehicle Kerb Weight: 503 Kg • Gross Vehicle Weight: 990 Kg • Fuel Tank Capacity: 121.

Details: Description Please Quote Your Lowest Price Inclusive Of Vat On The Following Item/s Or Lot/s Listed Below, Subject To The Terms And Conditions Of This Rfq, And Submit Your Quotation Duly Signed By Your Representative Not Later Than January 13, 2025, At Bids And Awards Committee Of Bfar 8, 3rd Floor Mrgp Commercial Bldg, Marasbaras, Tacloban City. For More Information, Please Call The Bac Secretariat At Telephone Nos.: 888-0381 (local 1003) Or Browse The Philgeps Website. Item/ Job Description: 1 Electromagnet Air Pump; Acv- Portable Aerator 20v-240v, 200 Watts Specifications: Frequency-50/60 Hz, Current: 1.40/0.83am, Pressure: 0.033 Mpa, Airflow: 0.135m Squared/min 6 Unit 50,040.00 2 Grass Cutter, Heavy Duty, Branded 1 Unit 20,000.00 3 Speaker (duel) With Metal Stand (kevler Zl12 12” 2-way T00w 1 Unit 20,585.00 Terms And Conditions: 1. That The Winning Bidder Shall Deliver The Said Items In 30 Calendar Days Upon Receipt Of Po. 2. The Winning Bidder Shall Deliver The Said Items At Laoang Multi-species Hatchery Station In Brgy. Aroganga, Laoang, Northern Samar. 3. Payment Shall Be Made After Inspection And Acceptance Of Authorized Bfar 8 Personnel And After Proper Process. Bidders Must Submit The Following Documents: 1.) Philgeps Registration Number 2.) Mayor's Permit 3.) Request For Quotation (rfq) 4.) Omnibus Sworn Statement (oss)* *for Single Proprietorship – Special Power Of Attorney, In Case The Person Signing This Request For Quotation Is Not The Business Owner, In Its Original And Duly Notarized Form. *for Corporation – Board Resolution/secretary’s Certificate, In Its Original And Duly Notarized Form. *for One Person Corporation (opc) – President’s Certificate/secretary’s Certificate, In Its Original And Duly Notarized Form.

Description: Restricted invitation to tender with public participation competition VOB/A construction work This is preliminary information with a call for competition. Sanitary/heating trade, conversion of house G8, ground floor/1st floor, sanitary: Ug/eg: 245 M PP sewage pipes DN 50 - ... More This is preliminary information with a call for competition. Sanitary / heating trade Conversion of house G8 Ground floor / 1st floor Sanitary: Ug/eg: 245 m PP wastewater pipes DN 50 - DN 100 42 pcs. sanitary objects and accessories 930 m stainless steel drinking water pipes DN 15 - DN 32 including insulation 1 pc. fresh water station with buffer tank 1 pc. fire extinguishing dry system with 1 feed point, 3 extraction points 35 m galvanized pipes DN 50 - DN 80 dismantling 110 m SML pipe, 135 m galvanized drinking water pipes 50 pcs sanitary objects Og1: 50 m PP wastewater pipes DN 50 - DN 100 15 pcs. sanitary objects and accessories 130 m stainless steel drinking water pipes DN 15 - DN 20 including insulation dismantling 80 m SML pipe, 100 m galvanized drinking water pipes 40 pieces sanitary objects Heating: Ug/eg: 19 pieces radiators (tubular radiators) 200 pieces pipes DN 15 - DN 50 including insulation 66 pieces heating fittings DN 15 - DN 32, 1 piece circulation pump Dismantling: 140 m heating pipes, 10 pieces radiators Og1: 9 pieces radiators (tubular radiators) 70 pieces pipes DN 15 - DN 20 including insulation Dismantling: 20 m heating pipes, 5 pieces radiators Companies can informally express their interest in participating in the OA tendering procedure. Documents can be requested from Mail@fm-zennern.de by January 31, 2025, stating the HAD reference number.

Description: 12274ms24j, 98050175, Quantity- 85.660 Mts Scrap Condemned Unserviceable Ms-gi-ci Rusted,corroded,dusted Mixed Scrap Of C And W,loco,p. Way,signal Interlocking Material Consisting Of All Type Of Sheets,boxes,ms High Gauge,pipes,footsteps,rings,strips,filters,trusses,patch Cut Parts,gutters,drum Clocks,distribution Boards,u Rack,boring Rod,ms Panel Body,ms Battery Charger Covers,hand Cuffs,driver Seat,hand Cart,push Trolley,packing Strips,ms Body Of Block Instrument,ms Boiler Coil Cut Pieces,42 U Rack Ms Body,ms Collapsible Gate,ms Termination Box,ms Bathroom Ventilator,ms Body Of Data Logger,ms Heater Coil,screen Guard,nuts,bolts,lavatory Doors,ms Carriage Doors,pins,rivets,links,rods,angle Cut Pieces,structural Frames,brackets,drums,cocks,basins,wire Meshes,wire Ropes,water Tank Cut Up Parts,casings,corrugated Sheets,filter Top And Bottom Caps,clamps,washer Plates,stands,frames,sheet Cuts,plate Cuts,joists,channels,bases,plates,flats Cut Pieces,vestibule Frames,window,door,shutters,head Stocks Cut Up Parts,broken T And P Items,racks,compensating Rings,bindings,washers,dust Bins,chains,berth Strips,gate Frames,iron Furniture,motor Bodies,screw Rods,levers,flats,rod Cut Pieces,trolley Wheels,gi Ducts,glow Sign Boards,ms Electrical Scrap,building Rods,packing Strips,ms Body Of Rru,air Cooler Empty Bodies,cbf Filter,corrugated Sheets,drums,blower Motor Frames,ucb Packing Frames,under Frame Cut Up Parts,berth Frames,supports,cylinder Blower Covers,valves,end Shield Covers,traction Motor Yokes,shafts,piston Rings,gears,brake Shoe Heads,brake Gear Items,straps,cotters,springs,equalizing Stays,fan Hub,end Shield,pinions,ms Covers,signal Arms,lc Gate Pipes,ladders,angles,signal Booms,rounds,signal Buckets,pulleys,fabricated Posts,signal Lamp Structures,liners,screws,spikes,air Brake Cylinders,brake Hangers,bss Hangers,battery Boxes,battery Containers,junction And Location Boxes,sleepers Cut Pieces,axle Counter Empty Box,dc-dp Ips Empty Rack ,sge Block Instrument Empty Box ,reset Counter Box,gps Clock ,42 V Rack,transformer Bay,ms Chain Pulley Blocks,beam Scale Parts,idly Cooker With Steam Generator Body,wheel Barrow,fry Pan Single Burner,ms Floor Stand,ms Sliders,ms Body Wet Grinder,fry Pan,jara,ms Ips Rack Rifle Safety Chain,ms Air Pump,foot Spray,antenna,spiral Binding Machine,ms Man Drill,trbc Covers,hand Cart Push Trolley,expresser Fan Guard,ms First Aid Box,hacksaw Frame,tool Box,tie Bars,ci Brake Blocks,composite Brake Blocks,ci Pulleys,buckets,ms Gear Wheels,gym Equipment,roti Maker,bicycle Parts,axle Box,bfr Cut Up Parts,grills,mesh,gate Wheels,girders Cut Pieces,collars,trolleys,foot Plates,signal Point Rods And Any Other Ms-gi-ci Material Present In The Lot With Or Without Attachments Of Nf,ss,rubber,nylon And Plastic. Ms Pan Mortars,wire Claws,wire Baskets,crow Bars,jim Crow,dip Lorry,weld Filling Body,sleeper Hooks,rail Dollies,rail Cutting Frames,augers,pick Axe,tongue For Rails,spades,beaters,ballast Rake,powrahs,rail Cum Road Mono Trolley,case Tin,h.s.lamps,rail Dolly Clips,shovels,trolley Wheels And Similar Gang Man Items Of Sorts And Sizes,with Or Without Attachments.fiber,glass,windows,frp Glass Windows,window Frames Of Sorts And Sizes,broken Or Unbroken,with Or Without Attachments Of Nf Window Shutters. [aluminium - 2 Percent] Note- 1. Nf Material,axles,wheel Discs,and Rails Or Material Not Mentioned In The Description,if Found During The Delivery Are To Be Returned To Railways. 2. Track And Track Fittings Running Through This Area Are Excluded. 3. Nf And Stainless-steel Attachments Are Approximately 0.1 Percent Of The Lot Quantity. 4. Gas Cutting Permitted To Facilitate Loading. At Two Locations- Bin No- 273 To 276 And Bin No 244, Left Side Of Road No- 2 Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Motor Vehicle Act 1988