Pumps Tenders

Pumps Tenders

DEPT OF THE AIR FORCE USA Tender

Corrigendum : Closing Date Modified
United States
Closing Date30 Apr 2026
Tender AmountRefer Documents 
Details: Baa Amendment 3, 19 September 2023: this Is An Annual Notice Of An Open Baa As Required By Far 35.016. white Papers Are Still Being Accepted Against This Baa. Please See The Broad Agency Announcement, As Amended, For Specific Details On Submitting White Papers. this Amendment Encompasses The Following Changes: 1. Broad Agency Announcement (baa) a) Due To The Number Of Revisions In Amendment 3, Refer To The “tracked Changes” Version Which Is Provided For Ease Of Identifying The Specific Changes That Have Been Made Since The Previous Amendment. 2. Baa Attachments a) The Following Attachments Are Included In This Baa. Attachments Have Been Amended Or Added As Annotated In Bold Font. 1. Supplemental Instructions For Assistance Instrument Proposal (amended) 2. Model Assistance Instrument (amended) 3. Model Contract (amended) 4. Model Section K – Representations And Certifications (amended) 5. Model Section L – Instructions, Conditions, And Notices To Offerors (amended) 6. Proposal Adequacy Checklist (amended) 7. Contract Data Requirements List (cdrls) Dd Form 1423-1 (amended) 8. Statement Of Objectives (soo)(no Change) 9. Statement Of Work (sow) Supplemental Requirements (amended) 10. Standard Form (sf) 424 Form, Research And Related Senior/key Person Profile (expanded) Form (added) 11. Security Program Questionnaire (added) **the Government Is Providing A Model Contract And Model Assistance Agreement For Planning And Estimating Purposes Only. Each Award Will Be Tailored To Each Specific Proposal. The Attached Model Contract Is All-encompassing Of Multiple Types Of Contracts And Is Provided To Identify All Provisions And Clauses That May Be Included In Subsequent Awards. ------------------------------------------------------------------------------------------------------------------------------------ baa Amendment 2, 14 July 2023: call 1 To The Initial Baa Is Closed. As A Result Of The Issuance Of This Amendment, Objective 4: "expeditionary Medicine (em), Aim 2, Medical Logistics" Of The Baa Is Re-opened. All Areas Of The Statement Of Objectives Are Open. an Annual Update Is Forthcoming And Will Be Issued In A Subsequent Amendment. -------------------------------------------------------------------------------------------------------------------------------------- thisis Call 1, "joint Multi-channel Infusion Pump (jmcip)" To The Initial Broad Agency Announcement (baa), Fa8650-20-s-6008. This Is A Two-step Call For The Specific Research Objective 4, Expeditionary Medicine (em), Aim 2, Medical Logistics Of The Baa. Research Objective 4, Aim 2, Will Be Closed Off From The Open Baa Period Until Award Of The Resulting Proposal(s) From This Call. this Call Is Effective As Of The Date Of This Posting, 18 February 2022.white Papers Are Due No Later Than 5:00 P.m. Eastern Standard Time (est) On 10 March 2022.please Submit White Papers Via Email To The Contracting Pocs For The Call, Ms. Marina Schemmel At Marina.schemmel@us.af.mil And Ms. Kimberly Cerney At Kimberly.cerney@us.af.mil. technical Poc For This Call: Mr. Nathaniel Baldwin, Nathaniel.baldwin.1@us.af.mil contracting Pocs For This Call: Ms. Marina Schemmel, Marina.schemmel@us.af.mil And Ms. Kimberly Cerney, Kimberly.cerney@us.af.mil ________________________________________________________________________________________________________ the Warfighter Medical Optimization Division (rhm) Intends To Solicit White Papers Under This Announcement With The Focus Of Conducting Medical Research In Support Of Optimizing The Warfighter By Enabling, Enhancing, Restoring, And Sustaining The Airman To More Effectively Execute The Air Force Mission. This Medical Research Objective Is Dual Natured: (1) Ensure Medical Availability Of Airmen By Analyzing Attributes (sensory, Behavioral, Physiologic) And Operational Environments (chemical, Physical, Psychological, Biological, Radiological Stressors) To Drive Optimal Performance Of Airmen Engaged In High-demand, High-impact Mission Tasks (2) Investigate How The Flight Environment Affects The Process Of Life, The Ability To Maintain Homeostasis, And The Risk For Injury Or Secondary Insult, Seeking To Ameliorate These Stressors To Optimize Airman Health And Performance. this Baa Will Remain Open For Seventy-two (72)months With Calls Being Released Throughout The Seventy-two (72) Month Period Of Performance.

National Irrigation Administration Tender

Civil And Construction...+1Irrigation Work
Corrigendum : Tender Amount Updated
Philippines
Closing Soon2 Dec 2024
Tender AmountPHP 9.3 Million (USD 159.9 K)
Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Canal Structures Of Sibalom Ris Contract Ref. No. : Nia.igimo-resto-nis-sibalom Ris-cw03-25 Location : Oton, Iloilo Approved Budget For The Contract (abc) : Php 9,314,500.90 Contract Duration : 150 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Dump Truck 2 Unit – 1 Bagger Concrete Mixer 2 Unit – Concrete Vibrator 1 Unit – Water Truck 1 Unit – Backhoe 2 Unit – Water Pump (4” Dia.) 1 Unit – Plate Compactor Brief Description: Construction Of Canal Structures Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Ten Thousand Pesos (php 10,000.00) To The Nia-igimo Cashier. Only Bidder’s Representative With The Special Power Of Attorney Or Board Secretary’s Certificate (if Corporation) Will Be Allowed To Purchase Bidding Documents And Upon Presentation Of Its Pcab License. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – December 2, 2024, 12:00 P.m. 2. Pre-bidding Conference – November 19, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – December 2, 2024, 2:00 P.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Joselito J. Depalubos Acting Section Chief O&m, Asbris & Sris Bac Chairman Noted: Randy C. Alipis, Mpa Division Manager A Head Of The Procuring Entity (hope) Date Of Posting: Philgeps – November 7 – December 2, 2024

City Of Bislig Tender

Civil And Construction...+1Water Storage And Supply
Philippines
Closing Soon26 Nov 2024
Tender AmountPHP 1.3 Million (USD 23.9 K)
Details: Description 1. The Local Government Unit Of Bislig City, Through The 20% Edf Cy 2021 And Cy 2022, Intends To Apply The Sum Of One Million Three Hundred Ninety Six Thousand Nine Hundred Six Pesos And 40/100 (p 1,396,906.40) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Water System For San Rafael And Puerto Maharlika @ Barangay Maharlika, Bislig City, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. 2.1 Brief Description Of Work: Installation Of Waterline W/ Fittings & Accessories From Source To Concrete Tub To Elevated Tank To Distribution Lin, Construction Of 1-unit Concrete Tub, Fabrication / Installation Of Solar Panel W/ Mounting Frame & Electrical Works, Painting Works Of Steel Surface For Elevated Tank And Solar Pump Housing And Solar Frame And Concrete Surface For Concrete Tub And Pedestal Of Elevated Tank And Solar Frame, Waterproofing, Construction Of Elevated Water Tank W/ Stainless Steel 4,222 Liters Tank & Hauling Of Materials. 2.2 Contract Duration: Seventy (70) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Bislig City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm. During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 05, 2024 Until The Deadline For The Submission Of Bids, From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On November 14, 2024, 1:30 P.m. At Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Given Address As Indicated Below On Or Before November 26, 2024, 1:30 P.m... Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 26, 2024, 1:30 P.m. At The Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Department Of Public Works And Highways - DPWH Tender

Civil And Construction...+1Civil Works Others
Philippines
Closing Date3 Dec 2024
Tender AmountPHP 8.9 Million (USD 151.1 K)
Details: Description Buildings: Construction – Low Rise - Concrete Cost Of Bidding Documents: Php 10,000.00 Source Of Funds: Fy 2025-dpwh Infrastructure Program Based On Nep The Significant Times And Deadlines Of Procurement Activities Are Shown Below: 1. Issuance Of Bidding Documents: November 15 - December 3, 2024, 8:30am 2. Pre-bid Conference Date & Time: November 21, 2024, 10:000 Am 3. Receipt Of Bids Deadline: December 3, 2024, 10:00 Am 4. Opening Of Bids Date & Time: December 3, 2024, 10:00 Am 5. Venue Of Activities Conference Hall, Cebu City District Engineering Office, V. Sotto St., Brgy. Tinago, Cebu City Prospective Bidders May Download The Bidding Documents (bds), If Available, At The Dpwh Website And At The Philippine Government Electronic Procurement System (philgeps). Bidders That Will Download Bd’s From The Dpwh Website Shall Pay The Said Fees As Stated Above On Or Before The Submission Of Their Bid Documents. The Bac Will Issue Hard Copies Of The Bds At The Same Address To Eligible Bidders Upon Payment Of A Fee Stated Above. The Interested Bidders For Project Number 3 Must Own Or Lease One (1) Unit Welding Machine (elect. Driven / Dc Output, 300amp), One (1) Unit Water Truck / Pump – 4,000l 360 Hp, And One (1) Unit Cargo / Service Truck 2-5mt, 270 Hp. Contractors / Applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. As Prescribed In Department Order No.3 Series Of 2015, The Deadline Of Submission Of Contractors Records To The Dpwh-civil Works Registry For Updating Is As Follows: A.) For Class “a” Documents And Financial Statements, Must Be Submitted At Least Seven (7) Calendar Days And B.) Technical Documents (completed / On-going Projects) At Least Fifteen (15) Calendar Days Before The Deadline For The Submission Or Opening Of Bids. Interested Bidders May Obtain Further Information And Inspect The Bidding Documents At The Same Address. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend And Late Bids Shall Not Be Accepted. Bid Submission Maybe Done Manually Or Electronically / Online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission Or At Electronicbids_cebucity@dpwh.gov.ph For Electronic Submission On Or Before The Deadline Stated Above. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. The Cebu City District Engineering Office Reserves The Right To Accept Or Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Hereby Incurring Any Liability To The Affected Bidders And No Responsibility To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Approved: Sharinah A. Batocapala Bac Chairman Noted: Manolo B. Madronio, Jr. Oic-district Engineer

National Irrigation Administration Tender

Civil And Construction...+1Irrigation Work
Corrigendum : Tender Amount Updated
Philippines
Closing Soon2 Dec 2024
Tender AmountPHP 4.6 Million (USD 79.9 K)
Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Office Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Canal Structures Of Suague Ris Contract Ref. No. : Nia.igimo-resto-nis-suague Ris-cw02-25 Location : Mina, Iloilo Approved Budget For The Contract (abc) : Php 4,659,167.82 Contract Duration : 120 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Dump Truck 2 Unit – 1 Bagger Concrete Mixer 2 Unit – Concrete Vibrator 1 Unit – Water Truck 1 Unit – Backhoe 2 Unit – Water Pump (4” Dia.) 1 Unit – Plate Compactor Brief Description: Construction Of Canal Structures Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Five Thousand Pesos (php 5,000.00) To The Nia-igimo Cashier. Only Bidder’s Representative With The Special Power Of Attorney Or Board Secretary’s Certificate (if Corporation) Will Be Allowed To Purchase Bidding Documents And Upon Presentation Of Its Pcab License. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – December 2, 2024, 12:00 P.m. 2. Pre-bidding Conference – November 19, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – December 2, 2024, 2:00 P.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Joselito J. Depalubos Acting Section Chief O&m, Asbris & Sris Bac Chairman Noted: Randy C. Alipis, Mpa Division Manager A Head Of The Procuring Entity (hope) Date Of Posting: Philgeps – November 7 – December 2, 2024

National Irrigation Administration Tender

Civil And Construction...+1Irrigation Work
Philippines
Closing Soon2 Dec 2024
Tender AmountPHP 4.7 Million (USD 81.3 K)
Details: Description National Irrigation Administration Davao Del Sur Irrigation Management Office Early Procurement Activities (epa) Repair/rehabilitation Of Supplementary Dam Of Badagoy Cis Cy 2025 The National Irrigation Administration-davao Del Sur Irrigation Management, Through The Fy 2025 National Expenditure Program (nep) Intends To Apply The Sum Of Four Million Seven Hundred Thirty Nine Thousand Eight Hundred Seventy Nine Pesos & 82/100 Only (php 4,739,879.82) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Epa Of Repair/rehabilitation Of Supplementary Dam Of Badagoy Cis Cy 2025, Lmc-ds-2025-01. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The National Irrigation Administration-davao Del Sur Irrigation Management Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 180 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From National Irrigation Administration-davao Del Sur Irrigation And Inspect The Bidding Documents At The Address Given Below From Monday To Friday (8:00 Am-5:00 Pm). A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 12-december 2, 2024 From Given Address And Website/s Below Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. The National Irrigation Administration-davao Del Sur Irrigation Management Will Hold A Pre-bid Conference On November 20, 2024 @ 9:00 O’clock In The Morning At Nia-davao Del Sur Irrigation Management Office, Conference Room, Lapu-lapu St., Digos City Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 2, 2024 @ 9:00 O’clock In The Morning. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On Before December 2, 2024 @ 9:30 In The Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Minimum Equipment Required: Trasit Mixer-2 Units, Boom Truck-1 Unit, Cargo Truck-1 Unit, Backhoe-1 Unit, Dumptruck-2 Units, Trailer Truck-1 Unit, Portable Batching Plant-1 Unit, One Bagger Concrete Mixer-1 Unit, Sheet Pile Drive–1 Unit, Water Pump–1 Unit, Utility Vehicle-1 Unit. The National Irrigation Administration-davao Del Sur Irrigation Management Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Sidney G. Rebosura Bac Secretariate Nia-davao Del Sur Irrigation Management Office Lapu-lapu St., Digos City, Davao Del Sur Email Add: R11.davaodelsur-imo@nia.gov.ph Tel. No. 237-6789 Engr. Jianel U. Masinadiong Bac Chairman

Ormoc City Tender

Electronics Equipment...+1Electrical and Electronics
Philippines
Closing Soon26 Nov 2024
Tender AmountPHP 285.2 K (USD 4.8 K)
Details: Description Republic Of The Philippines Cmo Government Of Ormoc City P.r. No.: 242895 Bids And Awards Committee Quotation No.: 245473-3027 Ormoc City Philgeps No.: Standard Form Title: Request For Quotation Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By You Or Your Authorized Representative Not Later Than _______ _______________________. (sgd) Katheryn A. Solaña Procurement Officer Note: (1) All Entries Must Be Typewritten Or Legibly Written. Of Acceptance By The End-user. (4) Price Validity Shall Be For A Period Of (2) Delivery Period Within 30 C.d. Upon Receipt Of The Sixty (60) Days. (5) G-eps Reg No., Mayors Permit, Dti/sec, And For Abc's Above Approved Funded Purchase Order (p.o.). Administrative 500k - Itr & Omnibus Sworn Statement Shall Be Attached Upon Submission Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall (6) Bidders Shall Submit Original Brochures Showing Certifications Of Be For A Minimum For Non-delivery Without Valid Reason. The Products If Applicable. (7) The Approved Budget Ceiling For This (3) Warranty Shall Be For A Period Of Three (3) Months Of Procurement Is (amount Indicated Below) Supplies & Materials, One (1) Year For Equipment, From Date Php 285,210.00 Activities Schedule From To 1 Issuance Of Canvass Thursday November 21, 2024 Tuesday November 26, 2024 2 Submission Of Canvass Wednesday November 27, 2024 10:00 Am 3 Opening Of Canvass Wednesday November 27, 2024 2:00 Pm # Item And Description Qty Unit Cost Total 1 Labor And Materials - Service Vehicle 1 Lot 1. For Repair And Replacement Parts Of Existing Patrol Vehicle Of Ocpo Toyota Hilux (4x2) With Plate No. S3a104 Ball Joint Upper Ball Join Lower Rack End Lhgrs Fuel Filter Disc Pad Break Shoe Assy Pump Belt Penetrating Oil 412 Ml 2. For Repair And Replacement Parts Of Existing Patrol Vehicle Of Ocpo Toyota Hilux (4x2) With Plate No. A60101 Labor And Materials Alternator Assy. 12v 90 Amp Alternator Belt 7bk-2050 3. For Repair And Replacement Parts Of Existing Patrol Vehicle Of Ocpo Toyota Hilux (4x2) With Plate No. Hac 2345 Labor & Matrilas Oil Filter Gear Oil 80w-90 Disc Pad Rotor Disc Assy. Lh/rh 4. For Repair And Replacement Parts Of Existing Patrol Vehicle Of Ocpo Toyota Hilux (4x2) With Plate No. S2u 635 Labor & Materials Replace Engine Unit Control Computer Engine Control Reprogram Engine Control Unit Rags Pms 5. For Repair And Replacement Parts Of Existing Patrol Vehicle Of Ocpo Toyota Hilux (4x2) With Plate No. A7gu 188 Labor & Marials Clutch Disc Assy. Full Down Transmision 6. For Repair And Replacement Parts Of Existing Patrol Vehicle Of Ocpo Toyota Hilux (4x2) With Plate No. Snb 9516 Pull Down Transmission Replace Clutch Disc Assy Rep. Release Bearing Assy. Grand Total >>> * Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your Conditions, I/we Quote You On The Item At Prices Noted Above And Hereby Commit To Deliver The Same If Adjudged To Have The Lowest And Responsive Quotation. Business Name 2024-11-242895 Printed Name/signature/date

University Of Ottawa Tender

Others
Canada
Closing Date6 Dec 2024
Tender AmountRefer Documents 
Details: This Request For Proposals (the “rfp”) Is An Invitation By The University Of Ottawa (the “university”) To Prospective Proponents To Submit Proposals For An Oxygen Transmission Rate Measurement And Water Vapour Transmission Rate Measurement Systems, Funded By The Canada Foundation For Innovation And The Ontario Research Fund. Prospective Proponents Must Be Able To Supply Both Systems. The Deliverables The Proposed Equipments Are An Oxygen Transmission Rate Measurement System And A Water Vapour Transmission Rate Measurement System. Oxygen Transmission Rate Measurement System: Oxygen Transmission Rate (otr) Measurement Is To Quantify The Rate At Which Oxygen Permeates Through Target Materials, Typically Thin Polymeric Film, Containers, And Membranes. This Is A Critical Method In Academics And Industries Such As Textile, Pharmaceuticals, Nanocellulose, Food, And Health And Safety-related Wearable Applications, Maintaining Object Integrity And Extending Lifetime Under A Given Environmental Condition. The Requested Equipment Is An Advanced Oxygen Transmission Rate (otr) Measurment System To Support Our Research And Development In Functional Thin Film Analysis. This Equipment Will Enable Us To Accurately Assess The Oxygen Permeability Of Various Thin Films, Including Polymer, Nanocellulose, And Ultrathin Metallic Films, Providing Critical Analysis To Understand The Interface Between Multi-stack Films In The Then-nanometer Range. Significantly, The Center For Hybrid Interfaces And Intelligent Thin-films (hiit) Is A Partnership Between Academia And Industry To Bring Transformational Advances In Hybrid Thin Films And Devices And Convergence With More Established Technologies Such As Bulk Semiconductors. Both Uottawa And Industrial Partners Will Benefit From Otr Measurement, Where Controlling Oxygen Permeation Is Critical To Maintaining Product Integrity, Ensuring That We Can Optimize And Develop Materials That Provide Ideal Barrier Properties Against A Given Environmental Condition. With Growing Environmental Concerns, Ort Measurement Will Help Us Establish Eco-friendly Packaging Materials That Balance Required Oxygen Barrier Performance With Sustainability. Water Vapour Transmission Rate Measurement System: A Water Vapour Transmission Rate (wvtr) Measurement System Evaluates The Rate At Which Water Vapor Permeates Through A Material, Especially Films Or Membranes, Under Temprature And Humidity Conditions. This Measurement Is Essential For Materials Used In Packaging, Pharmaceuticals, And Electronics, And Moisure Barrier Properties Are Critical To Maintaining The Integrity And Lifetime Of Devices. The Requested Equipment Is A Precise Water Vapor Transmission Rate (wvtr) Measurement. This System Is For Testing The Permeability Of Materials To Water Vapour. Wvtr Measurement Is Critical For Engineering Fields, Including Electronics, Packaging, And Pharmaceuticals, Where Controlling Moisture Levels Is Essential For Thin Film Quality, Safety, And Longevity. Wvtr System Will Provide Accurate, Reliable, And Repeatable Testing Results, Ensuring That Deposited Films Meet Required Standards And Performance Criteria, Which Is Well Aligned With The Objectives Of Center For Hybrid Interfaces And Intelligent Thin-films (hiit) Objectives. Understanding The Interactions Between Thin Films Of Various Hybrid Materials, Such As Organic-inorganic, Organic-metal, And High Throughput, Low-cost, And Low-power Consumption Roll-to-roll (r2r) Manufacturing Approaches Will Offer Canada And The World Revolutionary Innovations In Technology That Will Bring Tremendous Positive Economic, Health, Social, And Environmental Impacts. Innovations Include; (i) The Realization Of Low-cost Intelligent Labels That Detect Water Permeation Through The Film, (ii) Biometric Sensors Integrated Into Textiles That Can Identify Disease In Human Sweat For Early Detection And Prevention, And More. Under This Scope, Measuring The Water Permeation Through Thin Films, Interfaces, And Packaging Is Essential To Hiit Research. Mandatory Technical Requirements - Oxygen Transmission Rate Measurement System: 1.0 - Oxygen Transmission Rate Measurement System 1.1 - The Instrument Must Comply With International Standards, Such As Astm, Iso, Or Equivalent Standards. 1.2 - The Instrument Must Have An Automatic Calibration Protocol With Nist-traceable Calibration Standards Or Equipped With Automatic Calibration Sensors. 1.3 - The Instrument Must Provide Capabilities To Test Variety Of Samples Including But Not Limited To Thin Films, Polymers, Textiles, And Papers 1.4 - The Instrument Must Have An Ultra-high Barrier Testing Capability For Oxygen Permeation By A Detector Based On Coulometric Sensing (faraday Law Operation Principles). 1.5 - The Instrument Must Be Capable To Operate In A Higher Temperature Than 30oc. 1.6 - The Operating Temperature Range Must Have An Error (fluctuation) Of No More Than ±1oc. 1.7 - The Machine Must Allow For Fully Automated Testing, Including Vacuum/purging, Excluding Sample Loading. 1.8 - The Instrument Must Allow The Measurement Of Samples Having An Area Ranging From 5 Cm2 To 30 Cm2. 1.9 - The Instrument Must Provide No Less Than 2 Cells Per Cartridge. 1.10 - The Test Range On The Large Samples (30 Cm2 Or Larger) Must Be Better Than 0.005 -150 (cc/m2.day), And 0.05-1000 (cc/m2.day) For The Smallest Samples. 1.11 - The Resolution Of The Instrument Must Be Better Than 0.0005 Cc/(m2.day) 1.12 - The Repeatability Of The Instrument Must Be Better Than 0.005 Cc/(m2.day) Or 98%. 1.13 - The Instrument Must Be Bench Top And Dimensions Should Not To Exceed 1 M (h) X 1 M (w) X 0.75 M (d) And Cannot Weigh More Than 100 Kg. 2.0 - Connected Accessories 2.1 - If An External Vacuum Pump Is Needed, It Must Be Capable Of Achieving Less Than 2 Torr And Included With The System. 3.0 - Warranty, Installation, And Training 3.1 - Must Include 1-year Standard Manufacturer’s Warranty And Technical Support (on-site, Emails And Phone Calls). 3.2 - Must Include On-site Installation And Training. Supplier Must Agree To Video-recording Of The Training Session(s) For The Purpose Of Future Users’ Trainings. Mandatory Technical Requirements - Water Vapour Transmission Rate Measurement System: 1.0 - Water Vapour Transmission Rate Measurement System 1.1 - The Machine Must Comply With International Standards, Such As Astm, Iso, Or Equivalent Standards 1.2 - The Machine Must Have An Automatic Calibration Protocol With Nist-traceable Calibration Standards Or Equipped With Automatic Calibration Sensors. 1.3 - The Instrument Must Provide Capabilities To Test Variety Of Samples Including But Not Limited To Thin Films, Polymers, Textiles, And Papers. 1.4 - The Instrument Must Be Capable To Operate In A Higher Temperature Than 30oc 1.5 - The Operating Temperature Range Must Have An Error (fluctuation) Of No More Than ±5oc. 1.6 - The Carrier Gas For The Instrument Must Be Dry Nitrogen. 1.7 - The Instrument Must Accommodate Sample Dimensions Varying In Area From 5 Cm2 To 30 Cm2. Larger Sample Test Capability Is Acceptable. 1.8 - The Instrument Must Provide No Less Than 2 Cells Per Analyzer, And A Separate Film Cartridge 1.9 - The Resolution Of The Instrument For Large Samples Must Be Better Than 0.005-1 G/m2/day 1.10 - The Resolution Of The Instrument For Smaller Samples Must Be Better Than 0.0005 G/m2/day 1.11 - The Instrument Must Be Bench Top And Dimensions Should Not Exceed 1 M (h) X 1 M(w) X 0.75 M(d), And Cannot Weigh More Than 100 Kg 1.12 - The Instrument Must Come With A Real-time Data Logging Software With Data Export Capabilities At Least One Of Csv, Excel, Pdf, And Txt Formats. 2.0 - Connected Accessories 2.1 - If An External Vacuum Pump Is Needed, It Must Be Capable Of Achieving Less Than 2 Torr And Included With The System. 3.0 - Warranty, Installation, And Training 3.1 - Must Include 1-year Standard Manufacturer’s Warranty And Technical Support (on-site, Emails And Phone Calls). 3.2 - Must Include On-site Installation And Training. Supplier Must Agree To Video-recording Of The Training Session(s) For The Purpose Of Future Users’ Trainings.

Ascension Parish Government Tender

Energy, Oil and Gas
United States
Closing Date3 Dec 2024
Tender AmountRefer Documents 
Description: Bid Notice Sealed Bids Will Be Received By Ascension Parish Government At The Ascension Parish Government Purchasing Office, 615 E. Worthey St. Gonzales, Louisiana 70737 Until, December 3, 2024, At 10:00 A.m. Local Time. The Bids Will Be Publicly Opened And Read Aloud For The Following: Oil And Grease 15w40 – Bulk Oil $____________________________priced Per Gallon Api Cj-4, Ci-4 Plus, Ci-4, Cg-4, Cf-4, Api Sl, Sj, Sh; Cat Ecf-1, Ecf-2 & Ecf-3; Cummins Ces 20081; Detroit Diesel 7se 270; Ddc/mtu Series 2000/4000 Category 1&2; Mack Eo-o Premium Plus; Mack Eo-on Premium Plus, Mack Eo-n Premium Plus; Mack Eo-m; Volvo Vds 4, Olvo Vds 3, Vds 2, Vds; Acea European Service Categories E9-08 & E&-08; Allison C-4; Caterpillar To-2 Sae 10 W – Bulk Oil $____________________________priced Per Gallon Api Cf; Api Sh, Mil-l-2104 F; Mil-l-46152e; Allison C-4 & C-3 30w – 55 Gal. Drums $____________________________priced Per 55 Gallon Drum Api Cf-2; Api Cf & Sh; Mack Eo-k/2, Eo-k; Detroit Diesel Series 53, 71, 92; Mil-l-2104 F; Allison C-4 & C-3 Transmission Oil – 55 Gal. Drums $____________________________priced Per 55 Gallon Drum Agco; John Deere J20c; Ford New Holland Esn-m2c134-d, Fnha 2; Massey Ferguson M1135, M1141, M1143; Case Corporation Jic-143, Jic-145, Ms1206, Ms 1207, Ms 1209, Ms 1210 (tch); Oliver Q-1766b: Caterpillar To-2; Renk Doromat 874a & 874b; Kubota Udt; International Harvester B6; Volvo Wb 101 Antifreeze Coolant – Bulk $____________________________priced Per Gallon Most Green Coolants Are Conventional Eg With Some Corrosion Inhibitors. Gear Oil 80w/90 – 5 Gal. $____________________________priced Per 5 Gallon Container Api Service Classification Gl-5 Gear Oil – 5 Gal. $____________________________priced Per 5 Gallon Container Us Steel 424; Agma Ep 9005-e02; Mag Cincinnati, Cincinnati Machine P-74 Transmission Oil Md3- 55 Gal. $____________________________priced Per 55 Gallon Drum Diesel Exhaust Fluid $____________________________priced Per 2 Gallon Container Pca Environ Aw46 Biodegradable 10w Hydraulic Oil $ Priced Per 55 Gallon Drum Shell Spirax – S6 Atf A295, Synthetic Extended Drain Heavy Duty Atf $ Priced Per 5 Gallon Container Recommended For Allison Tes-468; Former Dexron Iii – Application Including Synthetic; Mb Approval 236.91; Zf Te Ml 14a/14b/14c; Caterpillar At-1; Voith Diwa Transmissions; Man 391-1-z3; Complies With Tes 295 Oat Antifreeze- (organic Acid Technology) $_______________________priced Per 55 Gallon Drum Astm D3306, D4985, D6210, D7583, As/nzs 2108.1.1997 “type A”, Bs 6580, Bs5117, Caterpillar Ec-1, Cid-a-a-52624, Cummins 3666132, 14603, Detroit Diesel 7se298, 933333k217, Freightliner 48-22880, Gm1825m, 1899m And Heavy Truck, Navistar/ite Cems B-1, Jis K2234, Kenworth R026-170-97, Mack 014gs17004, Man 324, Mtu Mtl 5048, Paccar Cs0185, Peterbilt 8502.002, Tmc Rp 338, Tmc Rp 329b, Volvo Jeff Cool-e105 Antifreeze $______________________ Priced Per 55 Gallon Drum Caterpillar (e100 And E100n Only; Excluding P150 And P150n), Cooper Bessemer, Dresser-rand (engines And Compressors), Ge- Jenbacher (e100n Approved), Enterprise, Superior, Waukesha Super Synthetic 75w10-140- Synthetic Gear Oil $____________________ Priced Per 5 Gallon Pail Api Gl-5 Shell Rotela T4 Triple Protection Sae 15w-40 $____________________ Priced Per 55 Gallon Drum Api Ck-4, C5-4, Ci-4 Plus, Q-4, Ch-4. Acea:e9, Caterpillar, Ecf-3, Ecf-2, Cummins- Ces20046, Jaso: Dh-2/ma/ma2, Ddc Df5 93k222, Mb-approval 228.31, Volvo Vds-4.5, Mack Eos-4.5 Man:m3575, Mtu Category 2:1, Deutz: Dqc111-10la, Allison Tes439, **68044417pc Shell Morlina S4 B 220 $__________________ Priced Per 55 Gallon Drum Iso 12925-1 Type Ckt Specification, Ansi/ Agma 9005-e02 Motorcraft Sae 5w-20 Synthetic Blend Motor Oil $ ____________________ Priced Per 55 Gallon Drum Api Gf-6/sp/rc/sn Plus Shell Omala S2 Gx 220 $ ____________________ Priced Per 55 Gallon Drum Iso 12925-1 Type Ckd Chevron Black Pearl Grease Ep Nlgi 2 $ ____________________ Priced Per 35 Lb Pail Cam2 Promax Aw 46 Hydraulic Oil $ _____________________ Priced Per 55 Gallon Drum Denison Hf-o , Hf-2, Cincinnati Milacon P-68, P-69, And P-70, Vickers M-2950-s And 1-286-s, Din 51524 ( Part Ii, Iii), Ansi 9005-e02- Ro, Astm D6158, Gm Ls-2, And Us Steel 126, 127. All Fleet Premium Aw 46 Hydraulic Oil $_____________________ Priced Per 55 Gallon Drum Pur -020, 17178, Pin 17178, Pin 37178, Pin 57178, 17179, Pin 17179, Pin27179, Pin 37179, Pin57179, 17180, Pin 27180, 37180, Pin57180, 17181, Pin 17181, Pin 27181, Pin37181, Pin57181,17182,pin17182,pin27182,oin37182,pin57182 Aw68 Hydraulic Oil $______________________priced Per 55 Gallon Drum Parker- Hf-0, Hf-1, Hf=2, Eaton E-fdgn-tb002-e, Bosch Rexroth Rde 90235, Din 51524, Part Ii (hm), Iso 11158 (hm), Astm D6158, Aist 126, 127, Sae Ms 1004 (hm), Gm Ls2, Jcmas P041 Hk And Seb 181222. La. R.s. 38:2212(f) (2) Whenever In Specifications The Name Of A Certain Brand, Make, Manufacturer, Or Definite Specifications Utilized, The Specifications, Shall State Clearly That They Do Not Restrict Bidders To The Specific Brand, Make, Manufacturer, Or Specification Named; That They Are Used Only To Set Forth And Convey To Prospective Bidders The General Style, Type Character, And Quality Of The Product Desired And That Equivalent Products Will Be Acceptable… Material Safety Data Sheets To Be Provided For All Materials. Bid To Be Submitted For A Period Beginning January 4, 2025 Through December 31, 2025. Bids Will Be Accepted As A Package Bid Only. Prices Shall Include Delivery To Various Location Facilities Throughout Ascension Parish. All Deliveries Must Be Made No Later Than Forty-eight Hours (48) From Time Of Order. Price Shall Include Pumping Material Into Parish Storage Tanks If Applicable. The Lowest Responsive Bidder, Awarded The Bid, Must Have A Minimum Of $300,000 General Liability Insurance And Workmen’s Compensation Insurance. A Copy Of The Insurance Must Be Sent To Ascension Parish Government Purchasing Office, 615 East Worthey Street, Gonzales, Louisiana 70737 Prior To The Vendor’s Initial Delivery Of This Material. Bidding Documents May Be Obtained At The Ascension Parish Government Purchasing Department Located At 615 E. Worthey St. Gonzales, Louisiana. Electronic Bids Are Accepted At Central Bidding. Central Bidding Can Be Accessed At Http://www.centralauctionhouse.com. Bidding Documents Are Available At Central Bidding. For Questions Related To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. The Ascension Parish Shall Not Be Responsible If The Bidder Cannot Complete And Submit A Bid Due To Failure Or Incomplete Delivery Of The Files Submitted Via The Internet. The Parish Of Ascension Reserves The Right To Disqualify Any Bid, Response To A Request For Qualifications, Or Request For Proposals If It Is Determined That The Submitting Business Entity Is Not In Good Standing With The Louisiana Secretary Of State Or Is Not Authorized To Do Business In The State Of Louisiana. Ascension Parish Government Reserves The Right To Reject Any And All Bids For Just Cause. Ascension Parish Government Clint Cointment, Parish President Weekly- Please Publish 11/14/24, 11/21/24, 11/28/24chief - Please Publish 11/14/24, 11/21/24, 11/28/24

PROVINCE OF ZAMBOANGA DEL NORTE Tender

Others
Philippines
Closing Soon28 Nov 2024
Tender AmountPHP 6 Million (USD 103 K)
Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Bids And Awards Committee Provincial Capitol, Estaka, Dipolog City Email Add: Bidsandawards22@gmail.com November 06, 2024 Invitation To Bid The Provincial Government Of Zamboanga Del Norte Through The Bids And Awards Committee (bac) Is Inviting Interested Parties/ Bidders To Bid For The Following Contract: Contract Id: Pr#300(01)24-11-082(ac) Contract Name: Procurement Of Marine Transportation (rescue Boat) Location/purpose: Rescue Watercraft/boat To Be Used For Water Search And Rescue, And Other Water-related Emergencies. Approved Budget For The Contract (abc): P6,000,000.00 (inclusive Of All Applicable Taxes)  Bidders/ Contractors Must Have An Expertise In Undertaking A Similar Project, Completed At Least Two Similar Contracts Which The Equivalent Amount Is At Least 50% Of The Proposed Project For Bidding Within The Last Three Years.  Bidders Are Inform That The Delivery Term Is 30 Calendar Days Upon Receipt Of Notice To Proceed.  Bidders/ Contractors Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents  Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates.  The Eligibility Check/ Screening As Well As The Preliminary Examination Of Bids Shall Use The Non- Discretionary "pass/ Fail" Criteria.  Post Qualification Of The Lowest/ Single Bids Shall Be Conducted.  All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of The Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr).  All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 14.  Bidding Is Restricted To Filipino Citizens/ Sole Proprietorships, Partnerships Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting November 07 - 13 2024 Pre-bid Conference November 14, 2024 @ 09:00am Availability And Issuance Of Bidding Documents November 07 - 28, 2024 @ 08:30am Deadline For The Submission Of Bids November 28, 2024 @ 08:30 Am Bid Opening And Evaluation November 28, 2024 @ 09:00am  Payment For Bidding Documents Is A Non- Refundable Amount Of Ten Thousand Pesos Only (php10,000.00) Payable To The Office Of The Provincial Treasurer, Provincial Capitol Building, Dipolog City.  Prospective Bidders May Obtain Further Information From The Office Of The Bids And Awards Committee, Provincial Capitol Building During Office Hours @ 8:00am - 5:00pm.  Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Stated Above.  The Provincial Government Of Zamboanga Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.  Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The Provincial Office Of Zamboanga Del Norte At Bidsandawards22@gmail.com. Atty. Rafael R. Osabel, Jr. Bac Chairman Annex A: Procurement Of Marine Transportation (rescue Boat) Pr#300(01)24-11-082(ac) Abc: P6,000,000.00 1. 1 Unit Rescue Boat *6.2m/ 20ft Aluminum Easy Craft Boat *fitted With 200hp 4 Stroke Outboard, Hydraulic Steering *5mm Aluminum Plate Construction *200l Under Floor Fuel Tank Capacity *self Draining Deck *with Led Lights, Bilge Pump, Isolator, Agm Battery Andremote Control Spot Light *equipped With Sound System Consist Of 4 Speakers *good For 8 Persons *full Safety And Accessories, Ready To Go *galvanised Trailer (included) *registration ***nothing Follows***
6581-6590 of 6758 active Tenders