Pumps Tenders

Details: Description Procurement Of Backhoe With Transporter Of The Municipality Of Asingan. 1 Unit Backhoe With Transporter Specifications: Engine: 4 Cylinder Displacement: 3.7l Horse Power: 110hp Power Output: 36.8kw/2200rpm Hydraulic System: Type Variable Plunger Pump Max. Discharge Flow: 152l/min Bucket: Bucket Capacity:0.28-0.3m3 Bucket Width:810mm Fuel Tank: 105l Engine Oil: 9.5l Hydraulic Oil Tank: 74l Pre-bid Conference – November 21, 2024 At 9:30 Am At The Bac Office Of The Municipal Hall Of Asingan Submission/receipt/opening Of Bids : December 3, 2024 At 9:30 Am At The Bac Office Of The Municipal Hall Of Asingan Bid Evaluation & Post Qualification – December 5, 2024 Bac Resolution – December 5, 2024 Issuance Of Notice Of Award – December 6, 2024 Approval Of Contract By Higher Authority – December 9, 2024 Issuance Of Notice To Proceed - December 10, 2024 Bid Documents Will Be Available Only To Prospective Bidders Upon Payment Of Non-refundable Amount Of Php 5,000.00 To The Municipal Treasurer’s Office, Asingan, Pangasinan The Municipality Of Asingan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For The Expenses Incurred In The Preparation Of Bids

Details: Description Procurement Of Machines And Equipment For Young Farmers Challenge (yfc) Business Development Center 3 Unit Vacuum Sealer -power Supply: 220v/ 60hz -heat Sealing Power: 0.60kw -ultimate Vacuum: 0.1hpa -pump Capacity: 20m3 -sealing Length: 390mm -sealing Width: 10mm -chamber Depth: 65mm -machine Size: +/- 540x490x500mm -with Warranty 1 Unit Chest Freezer -2 Doors Sliding -capacity: 509 Liters -temp. Range: -22°c -rated Power: 460w -power Supply: 220v 60hz -dimension: +/-l1470 X W854 X H854 Mm -with Warranty 1 Unit Chiller -dimension: +/-l630 X W710 X H2000 Mm -temp. Range: 2-10°c -capacity: 350 Liters -rated Voltage: 220v -frequency: 60hz 1 Unit Food Dehydrator -with Stainless Steel Trays -number Of Trays: Not Less Than 15 Layers -for Fruits, Vegetables, Herbs Etc. -with Temperature Setter And Controller -with 24 Hrs Timer Setting -with Safety Overheat Protection -with Warranty Pr # 2024-1939

Details: Description Invitation To Bid 1. The Department Of Public Works And Highways Southern Leyte District Engineering Office, Through The Gaa Fy 2024 (beff – Batch 2) Intends To Apply The Following Sums (refer To Paragraph 2) Being The Approved Budget For The Contract (abc) To Payments Under The Following Contracts Listed In Paragraph 2. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Public Works And Highways Southern Leyte District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of 2sty8cl, Malitbog National High School, Malitbog, Southern Leyte Contract Id No. : 1. 24il0102 Locations : Malitbog, Southern Leyte Scope Of Works : Construction Of 1 Unit 2 Storey – 8 Classrooms School Building Including Clearing And Removal Od Existing Structures, Earthworks, Structural Works, Masonry Works, Roof Framing And Roofing Works, Finishing Works, Painting Works Of Steel, Concrete And Wood Surfaces, Plumbing Works, Electrical Works Including Installation Of Cctvs, Android Tvs, Airconditioning Units, Fire Alarm System And Hybrid Solar Panel System, Construction Of Cistern Tanks And Elevated Water Tanks Including Pumping System, Installation Of Fire Hose Cabinets, Booster Pumps And Fire Extinguishers. Approved Budget For The Contract : Php 38,732,940.76 Contract Duration : 340 C.d. 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With At Least Pcab License Category Of B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Clause 5 Section Ii Of The Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways Southern Leyte District Engineering Office And Inspect The Bidding Documents At Ibarra, Maasin City, Southern Leyte During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7 - 27, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, According To The Table Below. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways Southern Leyte District Engineering Office Will Hold A Pre-bid Conference On November 14, 2024 @ 2:00 Pm At Dpwh Conference Room, Dpwh Brgy. Ibarra, Maasin City, Southern Leyte Or @ Www.youtube.com/@dpwh.sleytedeo For Live Streaming, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernleyte@dpwh.gov.ph For Electronic Submission On Or Before November 27, 2024 @ 10:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 11. Bid Opening Shall Be On November 27, 2024 @ 10:01 Am At Dpwh Conference Room, Dpwh Brgy. Ibarra, Maasin City, Southern Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways Southern Leyte District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Myca Maris C. Ramos Claudine Jhean M. Arnaiz Head, Bac Secretariat Bac Chairperson Dpwh-sldeo, Ibarra, Maasin City Dpwh-sldeo Ibarra, Maasin City Tel: (053) 570-9868 Tel: (053)570-9868 Email: Bacsled@yahoo.com Email: Bacsled@yahoo.com

Details: Description Republic Of The Philippines University Of Northern Philippines Tamag, Vigan City Invitation To Bid For The Procurement Of Construction Supplies And Materials 1. The University Of Northern Philippines, Through The Use Of Income, 2024 Intends To Apply The Sum Of ₱ 1,320,323.00 The Abc To Payments Under The Contract For The Procurement Of Construction Supplies And Materials/g-2024-41. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The University Of Northern Philippines Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 20 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From University Of Northern Philippines And Inspect The Bidding Documents At The Address Given Below During 8:00 Am – 12:00 Pm And 1:00-5:00 Pm, From Monday To Friday Except Non-working Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21 – December 11, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee To The Cashier’s Office For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (₱ 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The University Of Northern Philippines Will Hold A Pre-bid Conference On November 29, 2024, 9:00 Am At Bac Meeting Room, 2/f Roco Lina Building, University Of Northern Philippines, Tamag, Vigan City, Ilocos Sur And/or Through Video Conferencing Or Webcasting Via Google Meet (https://meet.google.com/jxm-txqj-xov) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through: (i) Manual Submission At The Office Address Indicated Below On Or Before December 11, 2024, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 11, 2024, 9:00 Am At The Given Address Below And/or Via Google Meet (https://meet.google.com/jxm-txqj-xov). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The University Of Northern Philippines Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dr. Fatima F. Rocamora/dr. Frances R. Duldulao University Of Northern Philippines Tamag, Vigan City, Ilocos Sur 2700 Bac@unp.edu.ph (077) 632-6895 Www.unp.edu.ph You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph November 20, 2024 Fatima F. Rocamora, Edd Bac Chairperson Procurement Of Construction Supplies & Materials Abc: ₱ 1,320,323.00 Lot No. Item No. Unit Item Description Qty Abc Lot 1 --supplies And Materials For The Building & Water Maintenance Unit (pr #2024-10-14-806) Use Of Income--abc: ₱ 1,320,323.00 1. Kilo Tie Wire #16 -40- 2. Pc Marine Plywood 3/4", Good Quality -180- 3. Pc Marine Plywood 1/2", Good Quality -30- 4. Pc Marine Plywood 1/4", Good Quality -200- 5. Pc Ecolumber 2 X 2 X 12 -180- 6. Pc Ecolumber 2 X 3 X 12 -180- 7. Pc Ecolumber 2 X 4 X 12 -60- 8. Pc Ecolumber 2 X 6 X 12 -40- 9. Kilo Common Wire Nail 2" -50- 10. Kilo Common Wire Nail 1" -25- 11. Kilo Finishing Nail 2" -25- 12. Pair Loose Pin Hinges 3 X 3 -20- 13. Pc Drawer Puller 4", Stainless Type, Heavy Duty -50- 14. Pc Magnetic Catches, Heavy Duty -50- 15. Set Door Knobs, Lever Lock, Heavy Duty -100- 16. Tin Paint, Flat Wall Enamel -5- 17. Tin Paint, Quick Drying Enamel -5- 18. Liter Plasolux Glazing Putty -20- 19. Liter Polytuff With Hardener -45- 20. Feet Sandpaper #80, High Quality, Red Surface -50- 21. Gal Paint Thinner -20- 22. Liter Wood Glue -10- 23. Pc Paint Brush 1", Good Quality -30- 24. Pc Paint Brush 2", Good Quality -30- 25. Pc Piano Hinges With Screw -20- 26. Pc Oil Tinting Color, 1/4 Liter, Assorted -10- 27. Liter Latex Color Paint, Assorted -10- 28. Liter Elastomeric All Purpose Sealant, Wet And Dry -25- 29. Pc Triangular Pile -6- 30. Pc Diamond Cutter Blade 4" -2- 31. Pc Flap Disc 4" -15- 32. Pair Carbon Brass -10- 33. Pc Circular Saw Blade, Heavy Duty 7 1/4" -2- 34. Pc Circular Saw Blade, Heavy Duty 9 1/4" -2- 35. Pair Hand Gloves With Rubber Palm -30- 36. Pc Hacksaw Blade 24tpi -10- 37. Pc Metal Drill Bit (5/32, 3/16, 1/4, 1/2) -20- 38. Pc Tekscrew Adapter -10- 39. Pc Measuring Tape, 10m, Heavy Duty -1- 40. Pc Cut-off Blade 14" -10- 41. Pc Dyna Bolt 3/8 -20- 42. Pc Dyna Bolt 1/2 -10- 43. Pc Dyna Bolt 5/8 -10- 44. Pc Wooden Tekscrew 2" -1000- 45. Pc Wooden Tekscrew 3" -1000- 46. Pc Ppr Pipe 2”, Pn20 -5- 47. Pc Ppr Pine 1 1/4", Pn20 -5- 48. Pc Ppr Pine 3/4", Pn20 -10- 49. Pc Siamese Valve, 3" X 2 1/2 X 2 1/2 -2- 50. Pc Ppr Ball Valve With Union Patente 1 1/4" -2- 51. Pc Ppr Ball Valve With Union Patente 1" -5- 52. Pc Ppr Elbow Plain 1 1/4" -10- 53. Pc Ppr Elbow Plain 1" -20- 54. Pc Ppr Elbow Plain 3/4" -100- 55. Pc Ppr Tee Plain 1 1/4" -5- 56. Pc Ppr Coupling Plain 1 1/4" -5- 57. Pc Ppr Coupling Plain 3/4" -20- 58. Pc Ppr Coupling Reducer Plain 1 1/4 X 3/4 -5- 59. Pc Ppr Coupling Reducer Plain 1 X 3/4 -5- 60. Pc Ppr Coupling Reducer, Female 3/4 X 1/2 -20- 61. Pc Ppr Union Patente Metal Joint 1 1/4" -5- 62. Pc Pe Tee 2" -3- 63. Pc Pressure Switch, Furnas, Heavy Duty, Good Quality -15- 64. Pc Foot Valve 1 1/4", Heavy Duty, Good Quality -3- 65. Pc Foot Valve 1", Heavy Duty, Good Quality -3- 66. Pc Foot Valve 3/4", Heavy Duty, Good Quality -3- 67. Pc Check Valve 1 1/4", Heavy Duty Good Quality -3- 68. Pc Check Valve 3/4", Heavy Duty Good Quality -3- 69. Pc Tank Fittings, Heavy Duty, Good Quality -15- 70. Pc Inlet Valve (supply Fill Valve), Heavy Duty, Good Quality -10- 71. Pc Angle Valve, Heavy Duty, Good Quality 1/2 X 1/2 -50- 72. Pc Flexible Hose, Heavy Duty, Good Quality 1/2 X 1/2 -20- 73. Pc Service Faucet, Heavy Duty, Good Quality -100- 74. Pc Lavatory Faucet, Heavy Duty, Good Quality -15- 75. Pc Gooseneck Lavatory Faucet, Heavy Duty, Good Quality -45- 76. Can Upvc Solvent, 400cc Wth Applicator -20- 77. Pc Tapelon Tape 3/4" -360- 78. Pc G.i. Plug 1 1/4" -5- 79. Pc G.i. Plug 1" -5- 80. Pc G.i. Plug 3/4" -10- 81. Pc G.i. Plug 1/2" -10- 82. Pc Upvc Pipe, 2" S1000 -10- 83. Pc Ppr Elbow Reducer, Female 3/4 X 1/2 -30- 84. Pc Pressure Gauge, Heavy Duty -10- 85. Pc Empeler Goulds, 1.0hp, 1.5hp, Bronze, Heavy Duty -1- 86. Pc Guide Vane Goulds, 1.0hp, 1.5hp, Bronze, Heavy Duty -1- 87. Pc Capacitor For Goulds Pump, 64-77mfd 220vac -5- 88. Pc Pressure Tank, 220 Gals, Stainless #14 -1- 89. Pc Pressure Tank, 82 Gals, Stainless #14 -3- 90. Pc Pressure Tank, 42 Gals, G.i. #14 -3- 91. Unit Electric Impact Drill -2- 92. Unit Circular Saw 235mm -1- 93. Unit Circular Saw 185mm -2- 94. Unit Fusion Machine 1/2-2.0 Dia. -1- 95. Unit Angle Grinder 4" -1- 96. Unit Electric Plainer -1- 97. Unit Welding Machine 200amp, Portable -1- 98. Unit Cut-off Machine 14" Dia. -1- 99. Unit Pump, 1.5hp Deepwell Horizontal -1- 100. Unit Pump, 1.5hp Deepwell Vertical -1- 101. Unit Pump, 1.0hp Shallow -1- 102. Pc Gasket (for Goulds Water Pump) -10- 103. Pc Bearing (for Water Pump) 6203, 6204 -10- 104. Pc Mechanical Seal, Goulds Water Pump, Heavy Duty -10- 105. Pc Mechanical Seal, Saer Water Pump, Heavy Duty -10- 106. Pc Upvc Wye 2" -10- 107. Pc Upvc Tee 2" -10- 108. Pc Upvc Elbow 4", 45deg -10- 109. Pc Upvc Elbow, 3", 45deg -10- 110. Pc Upvc Elbow, 2", 45deg -30- 111. Pc Upvc Elbow, 2" -30- 112. Set Bidet -10-

Details: Description Airconditioning Supplies And Equipment For The Use Of Fmd-hras At Dpwh Head Office Cy 2024 1 Refrigerant Gas 22, 13.6 Kilos/tank R-22 6 Tank 2 Refrigerant Gas R-410a, Kilos/tank 11.3 Kg 4 Tank 3 Acu Cleaning Chemical, Concentrated, 16 Ltrs/container 4 Container 4 Condensate Removal Pump (for Split/ Wall Type Acu) 10 Pc 5 Condensate Removal Pump (for Floor/ Ceiling Acu) 3 Pc 6 Fan Capacitor, 2 Uf 5 Pc 7 Fan Capacitor, 3 Uf 5 Pc 8 Fan Capacitor, 5 Uf 5 Pc 9 Fan Capacitor, 10 Uf 10 Pc 10 Magnetic Contactor, 60 Amps, 3ph 5 Pc 11 Acu Thermostat Control, Manual/analog 3 Pc 12 Industrial Whitening Detergent Powder, 1kg/pack 25 Pack 13 Pvc Tee, 1" Blue 20 Pc 14 Pvc Tee, ¾" Blue 20 Pc 15 Nitrogen Gas (50lbs Tank, With Adaptor), For Aircon Use 1 Tank 16 141b Aircon Flushing Chemical, 500ml 30 Cans 17 Electrical Tape, 10pcs/roll 5 Rolls 18 Work Gloves, Comfort Grip, Nitrile Coated, Cut Resistant, Large Size 15 Pairs Total Amount (php) Please Specify Total Amount In Words (php) "terms And Conditions : " "1. All Entries Must Be Typewritten Or Legibly Written. " 2. Delivery Period Within 15 Working Days Upon Receipt Of The Approved Funded Purchase Order (p.o). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non- Delivery Without Valid Reason. "3. Warranty Shall Be For A Mininum Of One (1) Year For Equipment And Three (3) Months For Supplies From Date Of Acceptance By " " The End-user. " "4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. " "5. Philgeps Registration Number And Mayor's Permit Shall Be Attached Upon Submission Of The Quotation. " Dti /sec And Latest Tax Clearance Shall Be Submitted Before The Award Of Purchase Order (p.o.). 6. To Establish Financial Capability, Bidders May Attach/includenin Its Quotation A Commited Line Of Credit (clc) Equivalent To 10% Of The Abc, From A Commercial Or Universal Bank. 7. Bidders Must Qoute For All Of The Items And Shall Submit A Proposal On Each Item And Evaluation And Award Of Contract Will Be Undertaken On A Lump Sum Basis. 8. Any Erasure, Correction Or Alteration Made By The Bidders In Any Of The Items Shall Render The Bid Non-complying, Hence, A Ground For Disqualification. 9. The Dpwh Reserves The Right To Accept Or Reject Any Bid To Annul The Bidding Process, And To Reject " All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder. " "10. Please Indicate The Brand And Model For Each Items Being Offered. " "medmier G. Malig Assistant Secretary For Technical Services And Information Management Service Chairperson, Bac For Goods "

Details: Description 1. The Dpwh-south Manila District Engineering Office Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 1,965,586.97 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25csoh0001 : Soil Exploration (borehole) For The Proposed Projects : I. Pedro Gil Br. 2 (b02300lz) Along Pedro Gil (herran), Ii. Construction Of Slope Protection Structure/bank Improvement Of Maricaban Creek, Sta. 0+936 To Sta. 1+170, Pasay City, Iii. Construction Of Slope Protection Structure Along Estero De Balite, Manila City, Phase I, Iv. Installation Of Booster Pump At Estero De Tripa De Gallina, Package 2a, Manila, V. Construction Of Slope Protection Structure At Baseco Compound, Port Area, Manila, Phase 7, Vi. Construction Of Slope Protection Structure Of Estero De Paco, Manila City, Phase 1, Vii. Construction Of Flood Control Structure Along Cut-cut Creek (left Side) Phase 1, Pasay City, Viii. Construction And Installation Of Pump And Its Facilities And Appurtenances At Bac Iii Drive, Pasay City, Ix. Construction Of Slope Protection Structure/bank Improvement/sheet Piling Of Maricaban (sta. 1+404 To Sta. 1+638), Pasay City, X. Construction Of Multi-purpose Building Within Zone 96 To 98, Sta. Ana, Manila City, Xi. Construction Of Multi-purpose Building, Barangay 853, Pandacan, Manila. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening Of The Financial Proposals. 2. The Dpwh-south Manila District Engineering Office Now Calls For The Submission Of “expressions Of Interest And Accomplished Eligibility Documents For Contract Id No. 25csoh0001 : Soil Exploration (borehole) For The Proposed Projects : I. Pedro Gil Br. 2 (b02300lz) Along Pedro Gil (herran), Ii. Construction Of Slope Protection Structure/bank Improvement Of Maricaban Creek, Sta. 0+936 To Sta. 1+170, Pasay City, Iii. Construction Of Slope Protection Structure Along Estero De Balite, Manila City, Phase I, Iv. Installation Of Booster Pump At Estero De Tripa De Gallina, Package 2a, Manila, V. Construction Of Slope Protection Structure At Baseco Compound, Port Area, Manila, Phase 7, Vi. Construction Of Slope Protection Structure Of Estero De Paco, Manila City, Phase 1, Vii. Construction Of Flood Control Structure Along Cut-cut Creek (left Side) Phase 1, Pasay City, Viii. Construction And Installation Of Pump And Its Facilities And Appurtenances At Bac Iii Drive,pasay City, Ix. Construction Of Slope Protection Structure/bank Improvement/sheet Pilingof Maricaban (sta. 1+404 To Sta. 1+638), Pasay City, X. Construction Of Multi-purpose Building Within Zone 96 To 98, Sta. Ana, Manila City, Xi. Construction Of Multi-purpose Building, Barangay 853, Pandacan, Manila. “expression Of Interest And Eligibility Documents Submission Forms (eiedsfs)” Of Interested Consultants Must Be Duly Received By The Bids And Awards Committee (bac) Of The Procuring Entity On Or Before November 13, 2024 Until 9:00 A.m. At South Manila District Engineering Office-procurement Unit. Applications For Eligibility Will Be Evaluated Based On A Non-discretionary “pass/fail” Criterion. 3. The Bac Shall Draw Up The Short List Of Consultants From Those Who Have Submitted Eiedsfs And Have Been Determined As Eligible In Accordance With The Provisions Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act,” And Its Implementing Rules And Regulations (irr). The Short List Shall Consist Of At Least One (1) Prospective Bidder Who Will Be Entitled To Submit Bids. The Criteria And Rating System For Short Listing As Per D.o. 143 Series Of 2022 Are: Shortlisting Criteria Maximum Points I Experience Of The Firm 60 Ii Availability Of Required Personnel Of The Firm 10 Iii Workload 30 Total 100 Pts. The Passing Score For The Shortlisting Evaluation Is Seventy (70) Points. 4. Prospective Bidders Must Submit A Copy Of Notarized Contract Agreement And Certificate Of Employment Of All The Staff (key And Non-key Personnel) As An Attachment To The Statement Of The Consultant Specifying Its Nationality And Profession Along With Their Curriculum Vitae (cv). 5. For The Purposes Of Determining The Eligibility And Shortlist Of Bidders In Accordance With Section 24.4 And 24.5 Of The 2016 Revised Irr Of Ra 9184 And In Compliance To Gppb Reso. No. 15 – 2021, Prospective Bidders Shall Submit A Valid And Updated Philgeps Certificate Of Platinum Registration And Membership In Lieu Of Class A Legal Documents Mentioned In Section 24.1.a. However, Submission Of Class “a” Technical And Financial Documents And Class “b” Documents For The Same Purposes Stated Above Shall Remain The Same. That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criteria As Specified In The 2016 Revised Irr Of Ra 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 7. The Procurement And Employment Of Corporation(s) As Consultant(s) For This Project Is Not Allowed. 8. The Procuring Entity Shall Evaluate Bids Using The Quality-cost Based Evaluation (qcbe). The Technical And Financial Proposals Shall Have Weights Of 70% And 30% Respectively. The Criteria And Rating System For The Evaluation Of Bids Are Provided In The Instructions To Bidders. 9. The Contract Shall Be Completed Within 120 Calendar Days. 10. The Dpwh-south Manila District Engineering Office Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Or Not Award The Contract At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Construction Of A Pressurized Micro Irrigation System To Supply Water Through The Rising/ Gravity Mains By Pressurized Pipeline System For Micro Irrigation With A Duty Of 0.35 Lit/sec/ha And Maintained Up To 30 Ha Chak And Deliver At Farmers Field Keeping The Discharge Of Minimum 10 Times The Duty At Of 1.0 Hectare At 05 Ha. Chak And At Least 25 Meter Residual Head At Each Field For Micro Pressurized Irrigation (drip/sprinkler) By Rotation Without Exceeding A Total Power Requirement Of 1.25 Mw In The Culturable Command Area Of 3310 Hectare Out Of 3675 Hectare Gross Command Area ,fully Covering The Entire Compact And Contiguous Possible Arable Area And Any Arable Area Found In Excess Should Be Dropped At The Tail End As Indicated In The Index Map For Micro Irrigation System Under Bokaro Micro Irrigation Project. It Includes All Activities Starting From Survey, Investigation, Designing, Procurement, Construction, Laying, Installing, Energizing, Etc Of Pumping System, Rising And Gravity Mains, Main Line, Branch Lines, Distribution Network, Controlling And Regulation System Etc For Supply Of Water For Irrigation Under Pressure With Scada And Automation. The Work Also Includes Watch And Ward, Management, Operation And Maintenance (mom) For The Period Of 60 Months After Completion And Further Extendable For Another 60 Months ,including 60 Months Of Defect Liability Period Running Simultaneously

Details: Description Agricultural Machinery And Equipment 1 2 Unit Super Power Tiller (diesel Powered 5hp 2 2 Unit Turtle/pagong Tiller No Engine 3 5 Unit Water Pump 7hp Diesel Engine With 3x100 Mtr Pe Hose 4 4 Unit Diesel Engine Agricultural Type 12hp Air Cooled 5 3 Unit Knapsack Sprayer ,battery,manual Atleast 20ltr Cap, 6 8 Unit Knapsack Sprayer ,manual Atleast 16 Liter Capacity 7 3 Pcs Shovel/pala Heavy Duty (spade) Wooden Handle 8 8 Pcs Shovel/pala Round Point Heavy Duty Wooden Handle 9 6 Pcs Hoe/asarol Iron W/ Handle Atleast 3.5ft 10 6 Pcs Pick Mattock/piko, Metal Body W/ Rubber Handle 14 Sharp 11 1 Unit Weighing Scale Manual 10kg Capacity 12 3 Pcs Container Drum Blue 200liters W/cover 13 3 Pcs Container Drum Blue 170 Liters W/cover 14 1 Pc Plough/araro Steel Mini Tiller Cultivator,opener Furrow Adjustable ,multifunctional (size 55x25x50 Cm) 15 1 Hose Water Hose Heavy Duty 100mtrs Pvc 1/2-3/4 Inch Diameter

Details: Description Title Of Pr/approved Budget For The Contracts (abc): Supply And Delivery Of Various Hvac Tools And Equipment (3 Items), As Per Bsp Technical Specifications And Terms And Conditions: Item No. Description Abc, Inclusive Of All Applicable Taxes And Other Charges Total Amount 2 One (1) Unit Vacuum Gauge, Wireless 17,920.00 4 One (1) Unit Vacuum Pump, 10cfm 45,920.00 5 One (1) Unit Digital Refrigerant Recovery Machine 104,160.00 Total: Php168,000.00 Quotations Exceeding The Abc Per Line Items Shall Be Disqualified. Delivery Period: Within 45 Calendar Days From Receipt Of A Copy Of The Executed Purchase Order Issuance Of Rfq: Starting 19 November 2024 Deadline To Submit Quotation: 25 November 2024, 12:00 Noon Bsp Address For Submission Of Quotation: Online Submission: Delegatedprocquotations@bsp.gov.ph Cc: Arpiamm@bsp.gov.ph Manual/hard Copy Submission: Gate 3 Reception, Bangko Sentral Ng Pilipinas-security Plant Complex, East Avenue, Diliman, Quezon City Bsp Address For Submission Of Queries And Clarifications: Bangko Sentral Ng Pilipinas - Security Plant Complex East Avenue, Diliman, Quezon City Trunkline: +632 8988-4800 Local 4559 Direct Line: +632 8925-7180/ 8441-5081/ 8928-3958 E-mail Address: Delegatedprocquotations@bsp.gov.ph Cc: Arpiamm@bsp.gov.ph

Details: Description Purchase Of Additional Health And Wellness Equipment For Psa Samar - Lot 1 Home Gym 4 Station Mp3004a- 1 Unit Specification: Weight Plates: 10x5kg(x2)'assembly Size:230x233x193(cm) Pec Dec Leh Raise Shoulder Shrug Vertical Bench Press 220lbs Plates Included Metalic Marble Finish " Motorize Treadmill- 1 Unit Running Deck: 560x1525 Dimension: 2055*935*1455mm Mp3 And Bluetooth Capable Hill, Fat Burned, Cardio Strength, Interval Incline Up & Down Enter, Speed Up & Down Fan, Display 9" Lcd Electronic Stationery Bicycle- 1 Unit Speed Monitor, Adjustable Seat Battery Powered Material: Alloy Steel Resistance: Magnetic 39.8"d X 8.7"w X 34.6"h Weight: 300 Pound Height: 33.07 Inches Number Of Resistance: 8 All Purpose Premium Exercise Yoga Mat- 16pcs 1/2" Extra Thick High Density Anti-tear Exercise Yoga With Carrying Strap Kettlebell- 2 Pc 10kg Thick Neoprene/vinyl Coated Non-slip Grip Gym Ball With Pump-2 Pc "materials: Polyvinyl Chloride (pvc) Anti Slip, 65cm Size: 65 Cm Anti Slip" Partial Quotation Is Not Allowed ***nothing Follows***