Pumps Tenders

Details: Description 1 "unit(s)" "excavator -" " Specification: Engine: - Type: High Pressure Common, Turbocharged - No. Of Cylinder: 6 - Emission Regulation: Tier 3/ Stage Iii - Displacement: 6.2l - Power Output: 129kw/2000rpm Hydraulic System: - Type: Variable Piston Pump - Max. Discharge Flow: 2x230l/min Digging Force: - Bucket Digging Force: 135/146kn - Arm Digging Force: 99/107kn Bucket: - Type: Backhoe Bucket - Bucket Capacity: 0.45-1.2(1.05m3) - Bucket Width: 1342mm Travel System: - Type: Axial Variable Plunger Motor - Support Roller Quantities: 2x8 - Carrier Control Quantities: 2x2 - Travel Shoes: 2x47 - Travel Speed: 3.3/5.1km/h - Drawbar Pulling Force: 212kn - Grade Ability: 70%(35°) Swing System: - Swing Motor Type: Swash Plate Plunger Motor - Swing Speed: 0.11r/min - Brake Type: Pressure Release Mechanical Braking Refilling Capacities & Lubrications: - Fuel Tank: 330l - Cooling System: 28l - Engine Oil: 22l - Hydraulic Oil Tank: 190l - System Capacity: 400l Operating Weight And Ground Pressure: - Shoe Width: 600mm - Ground Pressure: 47.5kpa - Operating Weight: 21900kg Warranty: * One(1) Year Warranty * Free Labor For Preventive Maintenance Note: * Free Engine Oil, Fuel Filter & Oil Filter On First Change Oil * Supplier Should Have A Service Center In Visayas" "***************************************************************" Purpose: For Use In Construction, Improvement, Rehabilitation And Maintenance Of Roads, Bridges And Other Infrastructure

Details: Description Balloon Assorted Color 100 Pcs/pack 5 Pack/s Balloon Long Assorted Color 25 Pcs/pack 5 Pack/s Ballon Pillar Stand 2 Pc/s Banderitas 22 Pack/s Cartolina Assorted Color 10 Pc/s Glue 240g 6 Btl/s Grocery Packs (cooking Oil 1l, Sweetened Pinceapple Juice 1l, Cheese (160g), Spaghetti Set, All-purpose Cream 370ml, Graham Crackers 210g, Mayonnaise 220ml, Sausage 175kg, Corned Beef 170g, Fresh Milk 1l, Cheese Spread 440g, Corn Kernel 425g, Rice 2kg) 13 Set/s Hygiene Kit With Print And Logo (toothbrush, Toothpaste, Hand 42 Set/s Illustration Board 1/8 10 Pc/s Mineral Water 500ml 140 Btl/s Permanent Marker Board (black) 10 Pc/s Polo Shirt (colored W/logo And Print) 25 Pc/s Portable Electric Air Balloon Pump 1 Unit/s Prizes/token: Games Prizes 2 Sack Of Rice 50kgs 2 Pcs Linen Blanket 2 Pcs Flashlight Led 2 Units Flat Iron 2 Units Deskfan 2 Units Single Burner Gas Range 2 Units Rice Bowl Of 4 1 Set/s Tarpaulin (3x2) 6 Pc/s Tarpaulin (8x12) 1 Pc/s Token (drinking Glass - Drink Tumbler) 50 Pc/s Tumbler Water With Print & Pouch 52 Set/s Sacks (for The Sack Race) 4 Pc/s Sticker Paper Matte - Letter 10 Pack/s

Details: The Purpose Of This Requirement Is To Obtain Elevator Maintenance Service (preventative And Corrective) For Passenger Elevators At Mt. Elbert Pumped Storage Powerplant (mte), Twin Lakes, Co. This Combined Synopsis/solicitation Is A Total Small Business Set-aside Using Naics Code 238290 Other Building Equipment Contractors, With A Small Business Size Standard Of $19m. This Combined Synopsis/solicitation For Commercial Services Is Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-07 Effective 8/29/2024. This Announcement Constitutes The Only Solicitation To Be Issued; Quotations Are Being Requested And A Written Solicitation Using The Standard Form 1449 Will Not Be Issued. The Anticipated Contract Type Is A Firm Fixed Price Contract.combined Synopsis/solicitation Closing Date: 27 February 2025combined Synopsis/solicitation Closing Time: 14:00 (2:00 Pm) Mountain Standard Timesite Visits: February 4 Thru 6, 2025; See Solicitation Provision At Far 52.237-1 For Scheduling.deadline For Questions: Questions Must Be Submitted To The Contract Specialist No Later Than 09:00 A.m. (mst), 19 February 2025. Any Questions Submitted After The Deadline Will Not Be Answered.all Correspondence Regarding This Solicitation Should Reference: Rfq No. 140r6025q0005 Mte Elevator Maintenance Service In The Subject Line.only Electronic Quotations Will Be Accepted For This Requirement. Quotations Must Be Electronically Delivered Per The Instructions Detailed In The Attached Information.electronic Communication Subject Line Must Contain The Following Naming Scheme: *quote Company Name Rfq # 140r6025q0005 Mte Elevator Maintenance Service*quotations Must Be In The Following Format: One (1) Pdf Document Containing Full Quote Information.

Details: Description Procurement Of Supplies And Materials For The Production Of Biological Control Agent 5 Drum Steel Drum, 300 Liters, Durable, Good Quality, Made Of Steel 61 Bottle Super Net, Insect Spray (trap/attractant), 600ml/bottle 50 Pack Autoclavable Plastic, 100pcs/pack, 12x18x 0.3 Thin 3 Unit Hand Trolley, - Capable Of Supporting Up To 300kg, Large Baseplate, Ideal For Moving Large And Heavy Items 7 Piece Nylon Cutter Plate, Aluminum, 5 Inches, Heavy Duty 1100 Piece Poly Bag, White Color: Large 1100 Piece Poly Bag, White Color: Xl 200 Roll Garbage Bag, Xxl, Black, 10 Pcs 2 Unit Wheelbarrow, 2b Wheel Barrow, Deep Type, Heavy Duty 25 Piece Lattice Moulding, ½ X2 X 10 Ft 25 Piece Lattice Moulding, 1x1x10 Ft 3 Unit Spading Fork, Heavy Duty, Metal Handle 3 Unit Shovel, 6 Inches, Heavy Duty Handle Material: Wood Covered With Steel. Spade Type 3 Roll Garden Net, Black, Good Quality, 100meters/ Roll 3 Piece Knapsack Sprayer, Manual, Tank Material: High Quality Plastic Tank Capacity: 16 Liters With Complete Head Nozzles, Sprayer Hose With Handle, Sprayer Lance, Adjustable Strap, Pump And Piston 3 Piece Rake, Heavy Duty, Metal Handle With Rubber Tip, Steel Material With 16 Teeth 3 Piece Digging Or Trenching Hoe, Heavy Duty, 6.5” Wide X 7.5” Deep. Ideal For Heavy Cultivation 2 Piece Bolo Knife, Durable 3 Piece Gardening Scissor, Heavy Duty Pr # 2025-0062

Details: Description 1. 10 Units - Fiberglass Boat With Marine Engine Dimension (length X Depth X Breadth): 30 Ft X 3.28 Ft X 4.26 Ft Inclusions: · Shafting - 3/4 In. X 8 Ft W/thread · Stainless Propeller - 3/4 In. X 9 In. · Stainless Rudder - 5/8 In. X 4 Ft · Brass Tube - 3/4 In. X 7 Ft · Cross Joint - 3/4 In. X 1 Ft Prime Mover: · Brand New 9.2 Hp, Single Cylinder, Four-stroke, Vertical, Air-cooled Diesel Engine · Maximum Power Developed: Atleast 93% Of The Rated Maximum Power · Continuous Power Developed: Atleast 83% Of The Rated Maximum Power · Specific Fuel Consumption At Continuous Running Test: 350 G/kw-hr With Aklan Provincial Logo Engraved And Painted On Fiberglass 2. 20 Sets - Walking-type Agricultural Tractor (pull-type) Type: Single Axle, Pull Type, Circular 50 Mm Diameter Actual Field Capacity: 0.19 Ha/hr, Minimum Fuel Consumption During Plowing: 1.8l/h, Maximum Field Efficiency: 86% Minimum Prime Mover: · Brand New 8.0 Hp, Single Cylinder, Direct Injection, Horizontal, Water-cooled Diesel Engine · Maximum Power Developed: Atleast 91% Of The Rated Maximum Power · Continuous Power Developed: Atleast 86% Of The Rated Maximum Power · Specific Fuel Consumption At Continuous Running Test: 350 G/kw-hr Implements: · Disc Plow (2 Discs), Minimum · Leveler · Comb Harrow · Moldboard Plow · With Cage Wheel (2 Pcs) And Brand New Pneumatic Tires (2 Pcs) · With Heavy Duty Trailer One (1) Ton Capacity With 2 Brand New Pneumatic Tires 3. 20 Units - Walking-type Agricultural Tractor (float-assist) Type: Single Axle-driven, Float-assisted Tiller Field Capacity: 0.44 Ha/hr, Minimum Field Efficiency: 84%, Minimum Width Of Cut: 950 Mm, Minimum Prime Mover: · Brand New 9.2 Hp, Single Cylinder, Four-stroke, Vertical, Air-cooled Diesel Engine · Maximum Power Developed: Atleast 84% Of The Rated Maximum Power · Continuous Power Developed: Atleast 85% Of The Rated Maximum Power · Specific Fuel Consumption At Continuous Running Test: 350 G/kw-hr 4. 20 Units - Mechanical Rice Thresher Type: Throw-in, Axial-flow, Single Open Peg Tooth Cylinder With Fan Threshing Capacity: 2000kg/hr, Minimum Threshing Efficiency: 99.8%, Minimum Threshing Recovery: 97% Minimum Total Losses: 3% Maximum Mechanically Damaged Grain: 1% Maximum Net Cracked Grains: 2%, Maximum Noise Level, Db(a): 95 Db (a) Maximum With Pulley (1pc) And Belts (2 Pcs) ***wtat-pull Type Engine Will Also Be Used As Prime Mover For Thresher ***amtec Tested Coupled With Engine Of Wtat-pull Type 5. 5 Units - Rice Reaper Type: Four Rows, Reciprocating Cutting Knife, Gear Driven Prime Mover: 5.22 Kw, Single Cylinder, Gasoline Engine Field Capacity: 0.35 Ha/hr, Minimum Field Efficiency: 80%, Minimum Header Loss: 0.5% Maximum Conveying Loss: 1% Maximum Total Machine Loss: 1.5% Maximum Noise Level: 92 Db (a), Maximum Cutting Width: 1200mm, Minimum Adjustable Cutting Height With Brand New Pneumatic Tires (2 Pcs) 6. 8 Sets - Water Pump And Engine Pump: · Single-end Suction, 100mm X 100mm, Self-priming Centrifugal Pump · Total Head: 20 M, Minimum · Suction Lift: 6m, Minimum · Discharge Rate Capacity: 25 L/s, Minimum Prime Mover: · 8 Hp, Four-stroke, Single Cylinder, Horizontal, Water-cooled Diesel Engine · Fuel Tank Capacity: 10 L · Lubricating System: Force Feed Type · Dry Weight: 85 Kg, Maximum Inclusions And Fittings: · One (1) Piece 4” Diameter Foot Valve · Pump And Engine Steel Base · Pulley , 1 Pc · Belt, 2 Pcs. · Flexible Hose, 30m Minimum Amtec Test For Prime Mover Must Conform To The Following: · Maximum Power Developed: Atleast 91% Of The Rated Maximum Power · Continuous Power Developed: Atleast 86% Of The Rated Maximum Power · Noise Level: 90 Db(a), Maximum · Specific Fuel Consumption At Continuous Running Test: 350 G/kw-hr 7. 4 Units - Corn Mill Type: Steel Huller, Hammer Mill-type, Stationary Screen With Rotating Brush Dimension (l X W X H): 1340 X 700 X 2050mm, Maximum Weight: 330 Kg, Maximum Input Capacity: 200 Kg/hr, Minimum Main Product Recovery: 55%, Minimum Losses: 5%, Maximum Degermer Efficiency: 80%, Minimum Prime Mover: Electric Motors (2 Units), 2.2kw Each (4.4 Kw Total), 220 V, 1760 Rpm Features: · Rotating Parts Are Enclosed. · Equipped With An Emergency Stop Button 8. 4 Units - Corn Sheller Type: Table Fed, Single Cylinder, Closed Frame Cylinder With Sifter Dimension (l X W X H): 2300 X 1500 X 1650 Mm, Maximum Shelling Capacity: 4000 Kg/hr, Minimum Shelling Recovery: 97%, Minimum Shelling Efficiency: 99.5%, Minimum Purity: 98% Minimum Prime Mover: · Brand New 9.2 Hp, Single Cylinder, Four-stroke, Vertical, Air-cooled Diesel Engine · Maximum Power Developed: Atleast 84% Of The Rated Maximum Power · Continuous Power Developed: Atleast 85% Of The Rated Maximum Power · Specific Fuel Consumption At Continuous Running Test: 350 G/kw-hr 9. 8 Sets - Walking-type Agricultural Tractor (rotary Tilling Type - Cultivator) Type: Rotary Tilling, Axle Driven, Hexagonal Cutting Width : 620 Mm, Minimum Prime Mover: 5.9kw, Four Stroke, Single Inclined , Aircooled Gasoline Engine Inclusions: · Modlboard Plow With Minimum Width Of 250 Mm · Bed Former With Minimum Working Width Of 400 Mm And Height Of 200 Mm Amtec Test For Unit Must Conform To The Following: · Field Capacity: 0.16 Ha/hr, Minimum · Fuel Consumption During Plowing: 2.70 L/hr, Maximum · Field Efficiency: 90%, Minimum · Dry Weight: 165 Kg, Maximum · Noise Level: 95 Db (a), Maximum Additional Requirements: • All Machineries Must Undergo Acceptance Testing. • All Machineries Must Have Provincial Government Of Aklan Logo And The Supplier's Contact Number And Logo. • Supplier Must Train Beneficiaries On Proper Operation, Maintenance, And Troubleshooting Of The Machineries. • With Complete Basic Tools And Accessories As Indicated In Paes • Must Conform To The Philippine National Standards/philippine Agricultural And Biosystems Engineering Standards For Respective Machinery/engine • Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary • Supplier Should Have A Dealership Certification For The Machinery And Engine From The Authorized Distributor/manufacturer Of The Brand Being Offered Specific To The Project. • Supplier Must Have A Service Center In Panay With Competent Technicians. • Supplier Must Have A Namdac Certificate Issued By Pcaf. • Supplier Must Have A Permit To Operate Issued By Da-bafe Region Vi • With Amtec Test Report For Coupled Systems (except Item 1), Individual Machineries, And Engines. • The Engine Brand Offered Must Be Available In The Local Market For The Last 30 Years X-x-x

Description: Public tender (service) Tunnel washing surfaces B27 Schürzeberg and B455 Feldberg feeder road 2025 Execution of cleaning work on the B 27 tunnel, Schürzeberg (sm Witzenhausen - East Hesse region) as well as the B 455 Feldberg feeder road (sm Usingen - Rhine Main region) by Hessen Mobil 2025 Tunnel Schürzeb ... Multiple execution of cleaning work on the B 27 tunnel, Schürzeberg (sm Witzenhausen - East Hesse region) as well as the B 455 Feldberg feeder road (sm Usingen - Rhine Main region) by Hessen Mobil 2025 Tunnel Schürzeberg, B 27: - Cleaning approx. 2,140.00 m of tunnel walls (height of cleaning area = at least 3.00 m) - Cleaning approx. 2,140.00 m of emergency walkway - Cleaning approx. 8,565.00 m2 of roadway - Cleaning approx. 70 pieces of tunnel operating equipment on the Feldberg feeder road, B 455: - Approx. 1,520.00 m2 trimming plants in different areas of the tunnel/noise barrier (LSW) - Approx. 1,120.00 m cleaning tunnel walls (height of cleaning area = 5.00 m) - Approx. 490.00 m LSW cleaning, Approx. 190.00 m2 LSW manual cleaning - Approx. 65.00 m light-permeable LSW cleaning, Approx. 120.00 m2 light-permeable LSW manual cleaning - Approx. 1,600.00 m cleaning emergency walkway - Approx. 3,360.00 m2 cleaning tunnel ceiling - Approx. 28 elements of the grid ceiling - Approx. 4,480.00 m2 cleaning roadway - Approx. 12 pieces of tunnel operating equipment cleaning - Approx. 2 pieces of shut-off bladders set up and dirty water pumped out

Description: Contract notice – general guideline, standard arrangements negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Tnw_hls_sankt Vincenzstift Ggmbh_renovation of the indoor swimming pool at the Vincenzschule in Rüdesheim am Rhein. The Sankt Vincenzstift Ggmbh is planning the energy-efficient renovation of the swimming pool at the Vincenzschule in Rüdesheim ... Moretnw_hls_sankt Vincenzstift Ggmbh_renovation of the indoor swimming pool at the Vincenzschule in Rüdesheim am Rhein. The Sankt Vincenzstift Ggmbh is planning the energy-efficient renovation of the swimming pool at the Vincenzschule in Rüdesheim am Rhein. The subject of the contract are the basic services of service phases 1-9 of the service profile for specialist planning of technical equipment in accordance with Section 55 Paragraph 1 Hoai IVM Annex 15 No. 15.1 in system groups 2, 3, 7 (swimming water technology) and 8 (lph. 4 subject to necessity) as well as the special service of monitoring the elimination of defects within the limitation period. Tnw_hls_sankt Vincenzstift Ggmbh_sanierung Indoor swimming pool of the Vincenzschule in Rüdesheim am Rhein A comprehensive description of the task can be found in the tender documents. Sankt Vincenzstift Ggmbh is planning the energy renovation of the swimming pool of the Vincenzschule Rüdesheim am Rhein, Ot Aulhausen. The renovation concept is to be designed in such a way that the swimming pool will exceed the energy standard Beg 70 Efficiency House and the required 75% minimum quota for renewable energies. In addition, the installation of an ultrafiltration system is intended to reduce the drinking water and heat required to operate the swimming pools. The aim of the planned renovation is to: - reduce current energy requirements from 209,000 kWh/year to 52,256 kWh/year (savings of 156,744 kWh/year) - reduce CO2 emissions by 71,444 kg/year (-82%) - reduce primary energy requirements by 75% to 40 kWh/m² per year - maintain water quality without constantly adding disinfectants - greatly reduce the use of chemicals - reduce drinking water requirements The following investment measures in cost groups 300, 400 and 700 are planned to achieve the energy goals: 0. Planning 1. Renovation or new construction of the water treatment system for the swimming pools, taking energy-efficient construction into account (energy and resource savings). 2. Renovation of the pool hydraulics in the swimmers' pool to ensure hygienically perfect flow. 3. Renovation of the therapy pool. 4. Renovation of the side room ventilation taking energy-efficient construction into account (energy saving). 5. Installation of an air and water heat pump (approx. 80kw) for climate-friendly generation of heat to operate the indoor pool and to reduce climate-damaging CO2 emissions. 6. Construction of a photovoltaic system (291kwp) to partially cover the electricity required for indoor pool operation. On the one hand, this system absorbs the additional electricity consumption of the new water technology and, on the other hand, contributes to achieving climate goals by reducing the electricity taken from the grid. 7. Installation of a biogas-powered cogeneration plant (approx. 50kw) to support heating and provide basic supplies for the indoor pool's electrical consumers. 8. Installation of an ultrafiltration system to reduce the drinking water requirement (resource saving) and heat requirement (energy saving) for the operation of the swimming pools (recovery of the process water from the filter rinse water). The project is mainly funded by federal funds, but state funds are also granted. The following timetable is drawn up for the implementation of the measures: In 2025: Start of the project - Preparation of the basic planning: Design, approval and implementation planning for measure 6 (PV system) By August 2025 - Installation of PV system (measure 6) August 2025 to November 2025 - Preparation of the basic planning: Design, approval and implementation planning for measures 1-5 and 7-8 (renovation or new construction of water treatment, renovation of the pool hydraulics of the swimming pool, renovation of the therapy pool, renovation of the side room ventilation, installation of an air-water heat pump, installation of a biogas-powered combined heat and power plant, installation of an ultrafiltration system to reduce water and heat consumption) In 2026: - Preparation of the basic planning: Completion of the implementation planning for measures 1-5 and 7-8 - Planning: Construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the pool hydraulics of the swimmers' pool (measure 2) - Renovation of the therapy pool (measure 3) - Renovation of the adjoining room ventilation (measure 4) - Planning: construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the pool hydraulics of the swimmers' pool (measure 2) - Renovation of the therapy pool (measure 3) - Renovation of the adjoining room ventilation (measure 4) - Installation of an air-water heat pump (measure 5) - Installation of an ultrafiltration system to reduce water and heat consumption (measure 8) In 2027: - Planning: construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the adjoining room ventilation (measure 4) - Installation of a biogas-powered cogeneration plant (measure 7) - Acceptances, checking of last outstanding invoices - Project completion by the end of December 2027 Basic documents have already been prepared and will be made available. The planning services are awarded from phase 1 onwards. The subject of the contract are the basic services of phases 1-9 of the scope of work for specialist planning of technical equipment in accordance with Section 55, Paragraph 1 of the Hoai IVM Annex 15, No. 15.1 in system groups 2, 3, 7 (swimming water technology) and 8 (phase 4 subject to necessity) as well as the special service of monitoring the elimination of defects within the limitation period.

Details: Request For Information Spe603-25-r-5x17 fuel Services And Operations Support In Republic Of South Korea defense Logistics Agency - Energy Is Seeking Information On Industry Capabilities/interest/potential Sources For The Receipt, Storage, And Issue Of 100,000 Barrels Of Aviation Turbine Fuel, Grade Jet A1 In South Korea. This Announcement Constitutes A Request For Information (rfi) Only; There Is No Solicitation At This Time. The Government Is Neither Negotiating Nor Calling For Offers At This Time. This Announcement Is An Expression Of Interest Only And Does Not Commit The Government To Pay For Any Response Preparation Cost. The Government Will Not Make An Award On The Basis Of This Rfi. concept Of Services And Operations: Fuel Services And Operations Would Primarily Consist Of Receipt, Storage, Protect And Ship U.s. Government-owned Jet A1. All Storage Capacities And Capabilities Must Be Available And Operational Under A Single Deep Water Storage Terminal Facility. area Of Consideration: Republic Of South Korea estimated Annual Throughput: 150,000 Barrels Of Total Throughput, For Each 12-month Contract Period. capabilities Sought: a.facilities Capable Of Receiving: U.s. Government-owned Petroleum Products Via The South North Pipeline (required) On A 24 Hours Per Day, Seven Days Per Week Basis At Pumping Rates Compatible With The Mode Of Transportation Tendered. Alternate Receipt Into Tankage Via Road Tanker Truck. b.facilities Capable Of Shipping: U.s. Government-owned Petroleum Products Via The Trans Korea Pipeline On A 24 Hours Per Day, 7 Days Per Week Basis, At Pumping Rates Compatible With The Mode Of Transportation Tendered. Also, Possess The Ability To Issue To Road Tanker Trucks. c.lighting: The Facility Must Be Equipped With Illumination To Allow Receipt And Shipping Operations During Hours Of Darkness. d.facilities Must Be Connected To Both The South North Pipeline And The Trans Korea Pipeline. e.all Product Must Be Held At A Single Location. f.if The Total Storage Capacity Cannot Be Met, Provide The Capacity That Can Be Supported. submissions Should Be Sent To Mrs. Micherie Dougherty At Micherie.dougherty@dla.mil Nlt 3:00 P.m. Local Fort Belvoir, Va Time On Monday, February 3, 2025. Please Direct Any Questions Concerning This Rfi To Contract Specialist, Mrs. Micherie Dougherty At Micherie.dougherty@dla.mil Or 571-767-3681, And/or Contracting Officer, Careka Squire At Careka.squire@dla.mil Or 571-767-6680. interested Firms Must Include In Their Submission, The Rfi Number Spe603-25-r-5x17 In The Subject Line Of Their Emails. The Following Information Is Requested: 1. Provide A Company Profile To Include Number Of Employees, Annual Revenue History (last 3 Years), Office Location(s), Duns/cage Code Number, Business Size, And A Statement Regarding Current Business Status. 2. Capability Statement. Provide A Brief Explanation Of Your Firm's Capabilities To Provide Contractor-owned, Contractor-operated Fuel Storage Facilities, Equipment, Tools, Materials, Supplies, And Supervision Necessary To Receive, Store, Issue, Maintain Quality, Account For Petroleum Products, Maintain The Associated Fuel Facilities And To Provide Qualified And Experienced Personnel, With Appropriate Clearances, If Required. 3. Past Performance. Do You Have Past Performance As A Prime Contractor Or Subcontractor On A Service Contract For Similar Fuels Management Requirements? If So, Please Provide The Following Information: Contract Number, Name Of Government Agency Or Commercial Entity, Period Of Performance, Dollar Value, Type Of Contract (fixed Price, Cost Reimbursement, Etc.), And An Explanation Of Services Provided As They Relate To Coco Fuels Management. If Your Firm Acted As A Subcontractor Or Joint Venture, Name The Prime Contractor Or Other Party, The Specific Work Performed And Percentage. Address Any Past Performance Problems, And Resolutions Taken. 4. Location: Please Provide The Location/address Of Your Facility.

Details: Please Join Us February 19, 2025, For An Industry Day/presolicitation Conference Hosted By The U.s. Army Corps Of Engineers, Louisville District For The Bt Collins Sacramento Army Reserve Center (arc) And Area Maintenance Support Activity / Vehicle Maintenance Shop (amsa/vms). the Government Is Planning To Issue Two Design/build Contract Solicitations: One For The Arcbuilding 662 Renovations And One For The Amsa/vma, Building 655 Renovations. the Arc Is Approximately 23,000 Sq Ft Including Office And Warehouse Space. Building Renovations Include New Roof, New Hvac, New Fire Suppression System Including Water Tank And Pump, New Flooring, New Plumbing Fixtures, Updated Electrical Panels And Pov Parking Re-pavement. the Amsa/vms Building 655 Is Approximately 13,000 Sq Ft Including Office And Maintenance Bays. An Approximately 5,000 Sq Ft Building Addition Will Be Added To The Existing Building Structure To Serve As Additional Maintenance Bay Space. The Building Renovations Include New Roof, New Hvac, New Fire Suppression System Including Water Tank And Pump, New Flooring, New Plumbing Fixtures, Updated Electrical Panels And Removing/replacing 20,634 Cubic Yards Of Asphalt Military Equipment Parking (mep). New Water Lines For Fire Hydrants And Lighting For The Mep Lot Is Also Required. this Is Not A Request For Proposal, An Invitation To Bid, Or A Request For Quotation. Therefore, This Event Is Not To Be Construed As A Commitment By The Government To Enter Into A Contract Nor Will The Government Pay For Information Provided To The Government In A Response Nor Pay For Administrative Costs Incurred Attending The Industry Day Event. No Reimbursement Will Be Made For Any Costs Associated With Travel Or Providing Information In Response To This Announcement. who Should Attend: this Event Is Open To Small And Socio-economic Businesses Who Are Registered In System For Award Management (sam.gov) For The Naics Field Denoted Below. naics Classification Codes: 236220 - Commercial And Institutional Building Construction meeting Date & Time: wednesday, February 19, 2025 9:00 Am - 11:00 Am Pacific Time meeting Location: 6270 Midway St. sacramento, Ca 95828-0907 virtual Option: https://dod.teams.microsoft.us/l/meetup-join/19%3adod%3ameeting_428bcdb5c92b45609459dc40745a5f22%40thread.v2/0?context=%7b%22tid%22%3a%22fc4d76ba-f17c-4c50-b9a7-8f3163d27582%22%2c%22oid%22%3a%223d9ec628-297d-447e-bf0a-177cfcd410a0%22%7d meeting Id: 993 563 570 326 passcode: Jk9h3vn6 dial In By Phone +1 601-262-2433 phone Conference Id: 407 615 21# register: no Later Than Friday, February 14th, 2025 At 1:00 Pm Pacific Time. all Vendors Who Plan To Attend The Industry Day Must Provide The Following Information To Both Alex Hamilton At Alex.j.hamilton@usace.army.mil And Bonny Dylewski At Bonny.c.dylewski@usace.army.mil In Order To Be Included On The Visitor Registration Roster For The Event: company Name And Uei first And Last Name Of Each Individual Attending From Your Company email Address Of The Individual Attending please Include If You Will Be Attending In Person Or Virtually questions: we Welcome Your Questions. Email Any Questions To Both Alex.j.hamilton@usace.army.mil Andbonny.c.dylewski@usace.army.mil. please Note That This Posting Will Be Updated To Include The Industry Day Presentation Following The Completion Of The Industry Day. partnering With Us: Https://www.usace.army.mil/business-with-us/partnering/

Details: Description Republic Of The Philippines Province Of Batanes Municipality Of Mahatao Mahatao, Batanes Bids And Awards Committee Invitation To Apply For Eligibility And To Bid The Municipal Government Of Mahatao Through The 20% Development Funds Intends To Apply The Sum Of Php 1,138,829.20 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Supplies For The Maintenance Of Swmp Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Description Of Items Item No. Item Description Qty Unit Emp Swmp Protective Gears & Other Supplies 1 Rubber Gloves, Black Xl 50 Pairs 2 Clear Goggles 15 Pcs 3 Raincoat-thick (coat & Pants) Xl 15 Pairs 4 Rubber Boots (bota)(size 13”) 15 Pairs 5 Rubber Boots (bota) Size 12” 5 Pairs 6 Kamisachino Long – Sleeves (xl) Green 10 Pcs 7 Kamisachino Long Sleeves (xxl) Green 15 Pcs 8 Hard Hat Green 15 Pcs 9 Hat (bilango Material) 15 Pcs 10 Trash Bag Xxl, Black Thick (10pcs/roll) 200 Rolls Expendable Parts Swmp Vehicles & Equipments 11 Brand New Tire 900 X 20 (with Flap & Interior) (doosan Backhoe) Tiron 8 Sets 12 Brand New Tire 700 X 16 (with Flap & Interior) Rib Type (goodyear Or Approved Equivalent) 6 Pcs 13 Brand New Tire 700 X 16 (with Flap & Interior) Lag Type (goodyear Or Approved Equal) 12 Pcs 14 Fuel Pump Assembly (isuzu Elf $hf1) Circuit 1 Assy 15 Fuel Pump Assembly (isuzu Elf 4hl1) Circuit 1 Assy Various Parts & Accessories 16 Fuel Pump Assembly (homwo Sinotruck Dump Truck 1 Assy Hammermill (operations & Maintenance) 17 Fanbelt B116 (hammermill) 4 Pcs 18 Fanbelt C62 (hammermill) 4 Pcs Other Swmp Requirements/supplies 19 Welding Rod N-6013 1 Box 20 Welding Rod N55 (3.2mm) 2 Boxes 21 Cutting Disc 4”, Metal 10 Pcs 22 Hacksaw Blade 50 Pcs 23 Stainless Welding Rod 20 Pcs 24 Acetylene Bronze Rod 1.6mm 20 Pcs 25 Battery Terminal Clamp 20 Pairs 26 2sm Battery (amaron, Motolite Or Approved Equal) 4 Pcs 27 3sm Battery (amaron, Motolite Or Approved Equal) 4 Pcs 28 Grease Gun (steveman) 2 Units 29 Radiator Coolant (anti-rust) 4 L 30 Blue Rope ½” Diameter 50 M 31 Industrial Gasoline High Pressure Washer 7hp Power Sprayer Cleaner, Model No.: Ghpw2103 1 Unit 32 Heavy Duty Wheel Barrow, Load Capacity, 150kgs, With Inflatable Tire 1 Unit Other Supplies 33 Battery Charger 12v/24v (model No: Ing-cb1601 1 Unit 34 Gsb 180-18v Cordless Impact Drill W/ 41 Pc Accessory, Charger & 2xbattery Pack 1 Set Fuel & Lubricants 35 Diesel – Company Sealed 10 Drums 36 Gasoline Premium 5 Drums 37 Oil 10 2 Pails 38 Mp Grease 2kg 16 Tubs 39 Diesel Engine Oil (delo Gold Sae 15w-40, 4l) 20 L 40 Wd-40, 412ml 10 Tubes 41 Atf Premium Sae 20 8 L 42 Fuel Filter (howo Sinotruck Dump Trucks) 2 Pcs 43 Oil Filter (howo Sinotruck Dump Trucks) 2 Pcs 44 Fuel Filter (isuzu Dump Truck 4hf1/4hl1) 2 Pcs 45 Oil Filter (isuzu Dump Trucks 4hf1/4hl1) 2 Pcs The Municipal Government Of Mahatao Now Invites Bids For The Procurement Of Supplies For The Maintenance Of Swmp Equipment. Completion Of The Works Is 60 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within One (1) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Interested Bidders May Obtain Further Information From The Municipal Local Government Of Mahatao And Inspect The Bidding Documents At The Address Below During 8:00 Am - 12:00 Nn And 1:00 Pm – 5:00 Pm, Monday To Friday. A Complete Set Of Bidding Documents May Be Purchased By The Interested Bidders At The Bac Secretariat Office, Municipality Of Mahatao, Province Of Batanes, Starting On January 24 To February 6, 2025 Upon Payment Of Non-refundable Fee Of Php 1,000.00 For Each Set. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before February 7, 2025, 10:00 A.m. At The Bac Office, Mahatao, Batanes. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On February 7, 2025, 2:00 P.m. At The Municipal Training Hall. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Lgu Bac Of Mahatao, Batanes Reserves The Right To Accept And Reject Any Bid, Declare The Whole Bidding Process Null And Void Any Time Prior To The Awarding Of Contract Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Rechie G. Rareza Head – Bac Secretariat Municipality Of Mahatao Province Of Batanes Email Address: Lgumahatao.bac@gmail.com Mobile No. 09294023944 Deborah C. Villamor Bac Chairperson