Pumps Tenders
Pumps Tenders
Department Of Beaches And Harbors Tender
Environmental Service
United States
Closing Date23 Dec 2024
Tender AmountRefer Documents
Details: The County Of Los Angeles Department Of Beaches And Harbors Is Seeking Qualified And Experienced Vendors To Enter Into Master Agreements To Provide As-needed Septic Tank Maintenance Services To One Or More Septic System Services: As-needed And Emergency Maintenance, Pump Outs, Septic System Repairs, Effluent And Groundwater Sampling, With Required Reporting Of Septic Systems Located At County-owned Or Operated Beaches. The Selection Of Vendors Will Be Based On The Qualifications Of The Firms That Submit Proposals. Vendors Submitting Statement Of Qualifications (soqs) Must Provide Proof Of Training Certificates Authorized By The Manufacturer To Service The Types Of Septic Systems And A Minimum Of Five (5) Years Within The Last Ten (10) Years Of Relevant Experience Providing Services For The Categories Being Requested. The County May Require Additional Minimum Qualifications. The Deadline For Submitting Soqs Will Be 5:00 P.m., December 23, 2024, However, County Will Continuously Accept Soq’s Throughout The Duration Of The Master Agreement. Further Information Regarding The Request For Statement Of Qualifications (rfsq) Is Available At: Https://doingbusiness.lacounty.gov/. To View And Print A Copy Of The Rfsq, Please Visit: Http://beaches.lacounty.gov/request-for-proposals/. The County Reserves The Right To Cancel The Rfsq And To Modify Any And All Terms And Conditions Of The Rfsq, Including Minimum Qualifications. For Further Information, Email Jean Dao At Contracts@bh.lacounty.gov. The County Of Los Angeles Department Of Beaches And Harbors Is Seeking Qualified And Experienced Vendors To Enter Into Master Agreements To Provide As-needed Septic Tank Maintenance Services To One Or More Septic System Services: As-needed And Emergency Maintenance, Pump Outs, Septic System Repairs, Effluent And Groundwater Sampling, With Required Reporting Of Septic Systems Located At County-owned Or Operated Beaches. The Selection Of Vendors Will Be Based On The Qualifications Of The Firms That Submit Proposals. Vendors Submitting Statement Of Qualifications (soqs) Must Provide Proof Of Training Certificates Authorized By The Manufacturer To Service The Types Of Septic Systems And A Minimum Of Five (5) Years Within The Last Ten (10) Years Of Relevant Experience Providing Services For The Categories Being Requested. The County May Require Additional Minimum Qualifications. The Deadline For Submitting Soqs Will Be 5:00 P.m., December 23, 2024, However, County Will Continuously Accept Soq’s Throughout The Duration Of The Master Agreement. Further Information Regarding The Request For Statement Of Qualifications (rfsq) Is Available At: Https://doingbusiness.lacounty.gov/. To View And Print A Copy Of The Rfsq, Please Visit: Http://beaches.lacounty.gov/request-for-proposals/. The County Reserves The Right To Cancel The Rfsq And To Modify Any And All Terms And Conditions Of The Rfsq, Including Minimum Qualifications. For Further Information, Email Jean Dao At Contracts@bh.lacounty.gov. More
Municipality Of Asingan, Pangasinan Tender
Transportation and Logistics...+1Automobiles and Auto Parts
Philippines
Closing Date3 Dec 2024
Tender AmountPHP 3.5 Million (USD 60 K)
Details: Description Procurement Of Backhoe With Transporter Of The Municipality Of Asingan. 1 Unit Backhoe With Transporter Specifications: Engine: 4 Cylinder Displacement: 3.7l Horse Power: 110hp Power Output: 36.8kw/2200rpm Hydraulic System: Type Variable Plunger Pump Max. Discharge Flow: 152l/min Bucket: Bucket Capacity:0.28-0.3m3 Bucket Width:810mm Fuel Tank: 105l Engine Oil: 9.5l Hydraulic Oil Tank: 74l Pre-bid Conference – November 21, 2024 At 9:30 Am At The Bac Office Of The Municipal Hall Of Asingan Submission/receipt/opening Of Bids : December 3, 2024 At 9:30 Am At The Bac Office Of The Municipal Hall Of Asingan Bid Evaluation & Post Qualification – December 5, 2024 Bac Resolution – December 5, 2024 Issuance Of Notice Of Award – December 6, 2024 Approval Of Contract By Higher Authority – December 9, 2024 Issuance Of Notice To Proceed - December 10, 2024 Bid Documents Will Be Available Only To Prospective Bidders Upon Payment Of Non-refundable Amount Of Php 5,000.00 To The Municipal Treasurer’s Office, Asingan, Pangasinan The Municipality Of Asingan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For The Expenses Incurred In The Preparation Of Bids
Hurup Fjernvarme A M B A Tender
Others
Denmark
Closing Date18 Dec 2024
Tender AmountRefer Documents
Details: Title: Hurup Fjernvarme - Varmepumpeanlæg Og Teknikbygning
description: Ved Nærværende Udbud Ønsker Ordregiver At Indhente Tilbud På At Etablere Et Komplet Luft/vand-varmepumpeanlæg Færdig Til Drift. Varmepumpeanlægget Skal Udnytte Udeluft Som Varmekilde Og Skal Benytte Det Naturlige, Ikke-giftige Og Ikke-brandfarlige Kølemiddel Co2. Varmepumpeanlægget Og Alle Øvrige Komponenter Og Udstyr Skal Indpasses I En Ny Teknikbygning, Indeholdt I Nærværende Totalentreprise. Teknikbygningen Og Alt Øvrigt Anlæg Og Udstyr Skal Forberedes For Hhv. +50% Varmepumpekapacitet Samt Etablering Af Ca. 10 Mw Elkedel I Enten Optioner Eller Fremtidig Entreprise. Varmepumpeanlægget, Vekslere, Pumper Og Hoved- Og Styretavler Skal Placeres Hensigts- Og Betjeningsmæssigt Forsvarligt. Herudover Skal Totalentreprenøren I Nærværende Totalentreprise Levere Og Etablere Elforsyning Iht. Entreprisegrænser, Herunder Etablering Af Koblingsanlæg Og Transformerkapacitet Til Forsyning Af Varmepumpeanlægget. Arbejdet Omfatter Alle Ydelser Og Relaterede Arbejder I Forbindelse Med De Angivne Arbejder, Herunder Inkluderet, Men Ikke Begrænset Til, Detailprojektering Af Det Komplette Maskinanlæg, Byggestyring, Kvalitetsstyring, Koordinering Med Hurup Fjernvarmes Sro-leverandør.
POBLACION COMPREHENSIVE NATIONAL HIGH SCHOOL Tender
Machinery and Tools
Philippines
Closing Soon28 Nov 2024
Tender AmountPHP 127.6 K (USD 2.1 K)
Details: Description Welding Helmet Auto Darkening 1 Welding Gloves 2 Welding Rod Small 2 Cutting Disc 5 Grinding Disc 2 Chipping Hmmer 2 Magnetic Angle Clamp 1 Pull Push Rule 10mtrs 1 Hacksaw 2 Utility Tray Big 3 Multi Tester 1 Wire Stripper 2 Long Nose Plier 4 Side Cutting Plier 4 Pen Light 4 Combination Plier 4 Standard Screwdriver 4 Star Screwdriver 4 4 Way Switch 1 Thw Wire Stranded #12 1 Pannel Board 1 Heat Gun 1 Kilo-watt Hour Meter 1 3 Way Switch 2 Single Pole Switch Flush Type 1 Gang 4 Convinience Outlet Flush Type 2 Gang 4 He Wooden Storage Cabinet 1 Tarpaulin (5x8) 2 Double Drum 4 Tarpaulin Signages Gad Committees 2x4 3 Adolescents Kit Bag 40 Nail Cutter 40 Toothbrush 40 Comb (normal) 40 Comb (for Lice) 40 Hair Gel 40 Baby Powder 25g 40 Volleyball (giant) 1 Electric Air Pump 1 Air Conditioner 1.8 Hp Inverter Split Type 1
City Of Cape Town Tender
Electrical Goods and Equipments...+1Electrical and Electronics
South Africa
Closing Date4 Dec 2024
Tender AmountRefer Documents
Description: * Supply And Delivery Of 1 Multi-functional Time Relay Required According To Specifications Attached:(k15 Time Relay As Attached Photo. Must Be Compatible With Current System Supply And Delivery Of The Siemens Multi-function Timer Relay (7pu4440) Or Equivalent. The City Of Cape Town High Voltage Department Requires A Siemens 7pu4440 Multi-function Relay (refer To Fig. 1 Below) For Hydraulic Pump Functionality On The Siemens 8dn9-1 Gas Insulated Switchgear. The Specification Provides For The Supply And Delivery Of The Siemens 7pu4440 Multi-function Timer Relay. Specification Of The Timer Relay For Siemens 8dn9-1 Gas Insulated Switchgear: # Multi-function Relay 24-250v Ac/dc # 2 Changer, Model G/9713 # Overall Width 45mm 1. The Onus Is On The Bidder To Familiarize Themselves With All Dimensions, Constraints And Limitations Applicable To The Supply Of The Relay Unit As Specified In The Product Specification And Must Provide A Picture Of The Product Required And Specification. 2. The Bidder Must Take Note That This Siemens 7pu4440 Multi-function Relay Timer Must Be Compatible With Siemens 7pu4140 (refer To Figure 2 Below) Product Specification Supply Circuit: Terminals 24v Ac/dc A1-a3 230v Ac A1-a2 Supply Voltage 24v Ac/dc; 230v Ac Tolerance Of Supply Voltage 24v Ac/dc 230v Ac -15 / +15 % Rated Frequency 50 / 60 Hz Or Dc Tolerance Of Nominal Frequency 48 ... 63 Hz Nominal Consumption 24v Dc Typ. 0.6 W 230v Ac Typ. 0.5 W / 5.5 Va Duty Cycle 100% Bridging Time <(><<)> 6 Ms Recovery Time > 40 Ms Drop-out Voltage = 20% Of Output Circle: Terminals 28-18-1 7 Type Relay Number Of Contacts No Contact 2 Contact Material Agni Rated Voltage (iec 60947-5-1) 250 V Min. Switching Voltage / Switching Current 12v / 10ma Max. Switching Voltage 250 V Ac Rated Operating Current (iec 60947-5-1) Ac-1 3 A / 250 V Switching Frequency With Load 6/min Without Load 1200/mi The Relay Must Be Brand New And Be Delivered To The Following Address. City Of Cape Town # Electricity High Voltage Offices Network Control Centre Cnr. Keurboom Rd And Laidlaw Rd Newlands/rondebosch Cape Town 1. Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" Please Call Asanda Maqina On 0738208753 For More Information.
GreenSquareAccord Tender
Electrical and Electronics...+2Solar Installation and Products, Electrical Works
United Kingdom
Closing Date5 Dec 2024
Tender AmountEUR 5.4 Million (USD 5.9 Million)
Details: Greensquareaccord (gsa) Are Seeking Suppliers To Carry Out Heating System Inspection, Service, Repair And Replacement Works. The Supplier Shall Be Expected To Provide Gsa's Heating Team With Occasional Support For Annual Servicing As Well As A 24 Hour, 7 Days A Week, 365 Year-round Fully Comprehensive Maintenance Repair Services To Gsa's Properties And Assets. The Service Shall Apply To All Properties Located Within Gsa's Geographic Locality Areas Highlighted. Heating And Hot Water System Assets Will Predominantly Be Natural Gas Fuel, However Assets May Be Varied In Fuel And System Type Ranging From Gas, Oil, Lpg, Ashp And Solar Thermal. The Supplier Will Also Provide Services To Deliver Repairs Outside Of The 3* Maintenance Cover Which Will Adhere To The Contracted Schedule Of Rates. This May Include The Requirement For Full Or Partial Heating And Hot Water System Replacements. The Contract Will Cover All Components Of Any Heating Or Hot Water Heating System, Including: O Domestic Gas Repairs - Reactive Emergencies And Routine Repairs; O Medium Duration Repairs; O Replacement Of Gas / Oil Boilers; O System Upgrades; O Commercial Gas Repairs - Reactive Emergency And Routine Repairs; O Heat Pump Servicing And Repairs (air Source & Ground); O Solar Heating Repairs And Unit Servicing; O Gas / Oil / Lpg Boiler Servicing And Landlord Gas Safety Inspections; O Certification/documentation To Support The Works Completed.
Eastern Railway - ER Tender
Civil And Construction...+1Excavation
Ireps
India
Closing Date4 Dec 2024
Tender AmountINR 13.1 Million (USD 156.3 K)
Details: Tender For Boring, Sinking, Installation And Supplying Of 100 X 50mm Dia Tube Well Assembly having Total Depth Of 93m(approx.) With The Following Operations And Components:-a) Drilling For sinking Of Tubewell Of 100 X 50mm Dia By Water Jet System In All Types Of Soil Including Supply Of T & P and Labour Complete In All Respect. B) Pvc Casing Pipe Isi Marked 100 Mm Dia 80 Schedule 35m Long
(oriplast Or Similar Brand).c)100 X 50mm Dia Reducing Socket Of Approved Quality,d) 50mm Dia Isi marked 80 Schedule Pvc Pipe Aprrox. 43m Length,e) Bottom Cutter, F)supply Of Pvc Ribbed Screen
stainer Oriplast (50 Mm Dia) Brand Conforming To Is-12818-1997 (50 Mm Dia), G) 1.5h. P. 75 X 40mm submersible Pump Of Cri/comptron Grieves Made With Panel Board & 15m Cable,h) 32 Mm Dia Isi
marked Pvc Pipe Of 40m Length As Column Pipe, I) Gravel Packing Around Filter Pipe, J)developement, yeild Test Of Tube Well By Using Air Compressure Till Sand Free Water Is Contained And Submitting
bactriological And Chemical Test Report From Approved Laboratory.
City Of Bislig Tender
Civil And Construction...+1Water Storage And Supply
Philippines
Closing Date10 Dec 2024
Tender AmountPHP 3.6 Million (USD 61.1 K)
Details: Description 1. The Local Government Unit Of Bislig City, Through The Lgsf-sbdp Cy 2023, Intends To Apply The Sum Of One Million Three Million Six Hundred Six Thousand Eight Hundred Eighty Two Pesos And 17/100 (p 3,606,882.17) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Level Ii Potable Water System At San Lorenzo, Brgy. San Roque, Bislig City, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. 2.1 Brief Description Of Work: I. Construction Of Elevated Water Tank Includes Reinforced Concrete Footing And Pedestal, Fabrication And Installation Of Painted Steel Framing Support And Installation Of 4,222 L Stainless Steel Tank. Ii. Solar Panel Mounting Includes The Construction Of Reinforced Concrete Footing And Pedestal, Painted Structural Steel Supports. Mechanical System Includes The Installation Of Solar Pumps & Accessories, Water Pumping System With Valves And Fittings. Electrical System Includes The Installation Of Panel Board, Electrical Wirings And Devices. Iii. Waterline Distribution Includes The Embedment Of Polyethylene Water Pipelines From Water Source, Water Tanks And To Tap Stand. Iv. Construction Of Concrete Water Tank Includes The Reinforced Concrete Tank Wall And Top And Bottom Flooring, Painting And Waterproofing. V. Construction Of Cyclone Wire Fence Includes The Reinforced Concrete Footing And Pedestal, Painted G.i. Pipe Post And Framing, Barbed Wire And Installation Of Cyclone Wire Sheets. Vi. Construction Of Concrete Tap Stand Includes The Reinforced Concrete Pad And Pedestal, Installation Of Water Pipe Fittings And Faucets. 2.2 Contract Duration: Fifty Five (55) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Bislig City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm. During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 18, 2024 Until The Deadline For The Submission Of Bids, From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On November 26, 2024, 1:30 P.m. At Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Given Address As Indicated Below On Or Before December 10, 2024, 1:30 P.m... Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 10, 2024, 1:30 P.m. At The Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.
Parks Canada Tender
Civil And Construction...+1Civil Works Others
Canada
Closing Date10 Dec 2024
Tender AmountRefer Documents
Details: Bids Received By Fax And Email Will Be Accepted As Official. Parks Canada Is Not Currently Accepting Bids Via Sap Ariba, You Must Submit Your Bid Via Fax Or Email As Indicated In The Solicitation Document. Bids Received In-person Or By Courier Will Not Be Accepted. The Only Acceptable Email Address For Responses To The Bid Solicitation Is Soumissionsami-bidsrpc@pc.gc.ca. Bids Submitted By Email Directly To The Contracting Authority Or To Any Email Address Other Than Soumissionsami-bidsrpc@pc.gc.ca Will Not Be Accepted. The Only Acceptable Facsimile For Responses To Bid Solicitations Is 1-855-983-1808. The Maximum Email File Size That Parks Canada Is Capable Of Receiving Is 15 Megabytes. The Bidder Is Responsible For Any Failure Attributable To The Transmission Or Receipt Of The Emailed Bid Due To File Size. The Bidder Should Be Cognisant Of The Size Of The Email As A Whole, And Not Only The Attachments. Please Take Into Consideration That Some Attachments, When Sent, May Be Resized During The Email Transfer. If The Email Size Is Too Large, The Bidder Should Send The Bid In Multiple Emails Properly Labeled With The Solicitation Number, Project Name, And Indicate How Many Emails Are Included (ex. 1 Of 2). Emails With Links To Bid Documents Will Not Be Accepted. Bid Documents Must Be Sent As Email Attachments. Special Instructions To Bidders (si) This Is A Two Stage Selection Process. Bidders Responding To This Selection Process Are Requested To Submit A Bid In Two Stages. This Posting Is The First Stage (stage One) Of A Two-stage Solicitation Process: The First Stage Will Evaluate The Qualifications Of All Interested Suppliers; The Second Stage (stage Two) Will Invite The Qualified Suppliers To Provide A Financial Bid On The Project Based On The Specifications And Drawings. Upon Award Of Contract In Stage Two The Pre-qualification List Will Expire And Will Not Be Used In Any Other Solicitation. The Qualification List Will Expire Within 180 Days Or Upon Award Of A Contract In Stage Two, Whichever Is Earlier, And The Prequalification List Will Not Be Used In Any Other Solicitation. Following The Evaluation Of The Submissions Of Stage One, Bidders Will Be Advised Of Their Qualification Result And The Status Of The Tender. Stage Two Bidders Will Be Provided An Invitation To Tender (itt) For The Financial Evaluation In Relation To The Specifications And Drawings. Requirement Parks Canada Agency (pca) Requires An Experienced Contractor To Perform The Work Of The Contract, Including But Not Limited To, Labour, Materials And Equipment For The Banff East Gate Water Treatment Project. The Work Involves The Supply And Installation Of New Water Treatment Equipment, Associated Piping, And Electrical/instrumentation. The Work Will Consist Of, But Is Not Limited To: • Supply And Installation Of Cartridge Filtration System; • Supply And Installation Of Uv Disinfection System; • Supply And Install Of Hdpe Treated Water Storage Tank, Distribution Pumping And Re-circulation System; • Supply And Install Electrical And Control System For The New Water Treatment Equipment And Pumping System; • Upgrade Instruments And Controls For Existing Septic Tank And Pump • Supply And Install New Electrical And Controls For The Existing Well Pump • Coordinating The System Programming With The Approved System Integrator; And • Start-up And Commissioning Of Each Component And The Start-up And Commissioning Of The Overall System As A Complete Entity. The Equipment Will Be Installed Inside A Newly Constructed Utility Building And Nearby Septic Field. The System Is Designed For Demand Not To Exceed 3 M3/day. All Sensors And Equipment Are Expected To Be Connected To And Controlled By A Programmable Logic Controller (plc) To Provide Plant Monitoring, Alarm, Automatic Shutdown, And Communication Functionality. To Assist With Bonding And Insurance Requirements, This Project Is Estimated At A Value Between $250,001 > $ 500,000, Taxes Extra. Bidders’ Conference A Bidders' Conference Will Be Held Via Teleconference On November 28, 2024. The Conference Will Begin At 1:00 Pm (mst). The Scope Of The Requirement Outlined In The Bid Solicitation Will Be Reviewed During The Conference And Questions Will Be Answered. It Is Recommended That Bidders Who Intend To Submit A Bid Participate. Bidders Are Requested To Communicate With The Contracting Authority Before The Conference To Confirm Participation And Obtain The Dial-in Coordinates. Bidders Should Provide, In Writing, To The Contracting Authority, The Name(s) Of The Person(s) Who Will Be Participating And A List Of Issues They Wish To Table No Later Than November 27, 2024 At 12:00 Pm (mst). Any Clarifications Or Changes To The Bid Solicitation Resulting From The Bidders' Conference Will Be Included As An Amendment To The Bid Solicitation. Bidders Who Do Not Participate Will Not Be Precluded From Submitting A Bid. Period Of Contract / Delivery Date Contractor Shall Perform And Complete The Work No Later Than April 30, 2025. Enquiries All Enquiries Of A Technical And Contractual Nature Are To Be Submitted To The Contracting Authority. Enquiries Regarding This Solicitation Must Be Submitted In Writing And Should Be Received No Later Than Five Business Days Prior To The Date Set For Solicitation Closing To Allow Sufficient Time To Provide A Response. Enquiries Received After That Time May Result In An Answer Not Being Provided. Information National Parks Regulations Require That All Work Is To Be Performed In Accordance With The Ordinances, Laws, Rules And Regulations Set Out In The National Park Act. Bidders That Consider Themselves Qualified To Provide This Work And Intend To Submit Bids On This Project Should Obtain Documents From The Government Electronic Tendering Service Through The Government Of Canada Tendering Service At Www.canadabuys.canada.ca/en/tender-opportunities. Addenda, When Issued, Will Be Available From The Government Of Canada Tendering Service. Bidders That Elect To Base Their Bids On Documents Obtained From Other Sources Do So At Their Own Risk. Late Submissions Will Not Be Considered. The Crown Retains The Right To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada. Parks Canada Has Made Every Effort To Provide Equivalent Documents In Both Official Languages, However, If You Find Any Discrepancies Between The English And French Documents, Please Notify The Contract Officer Listed In This Opportunity As Soon As Possible So That We Can Rectify The Situation.
Uranium Corporation Of India Limited - UCIL Tender
GEM
India
Closing Date13 Dec 2024
Tender AmountINR 1 Million (USD 12.4 K)
Description: BOQ ITEMS: Patrolling or Inspection of DI pipe line for checking leakage detecting from intake well cum pump house to Turamdih Area where DI pipe line exists with technical persons Minimum one fitter with transport facility daily and including tightening of nuts and bolts where ever required for rectification of leakages observed during routine inspection., Attending as and when required major breakdown or rectifying leakage of DI pipe line including fixing of necessary mechanical joint and all accessary within twelve hours information or notice for rectification till the resumption of the service including al labour charges equipment tools and tackles but excluding cost of materials etc, Overhauling charges of valves including change of gland packing if required with all labour charges for joints for following sizes of gate or sluice valve or butterfly valves For Four hundred mm dia, Overhauling charges of valves including change of gland packing if required with all labour charges for joints etc for following sizes of gate or sluice valve or butterfly valves For Five hundred mm dia., Repairing of air valves including charges of float ball with all labour charges tools and tackles, Earth work in excavation in trenches or drains including dressing of saides and ramming of bottoms lift upto One point five metre including getting out the excavated soil and disposal of surplus excavated soil as directed All kinds of soil, Return earth filling by available excavated earth Excluding rock in trenches plinth sides of foundation etc in layers not exceeding twenty cm in depth consolidating each deposited layer by ramming Allow for breading up lumes shrinkage etc watering lead upto fifty metre and lift upto One point five metre complete as directed by the EIC., Clearing jungle including uprooting of rank vegetation grass bush wood trees and saplings of girth upto thirty cm measured at a height of one metre above ground level and removal of rubbish upto a distance of fifty metre outside the periphery of the area cleared., Surface dressing of the ground including removing vegetation and in equalities not exceeding fifteen cm deep and disposal of rubbish lead upto fifty metre and lift upto one point five metre All kinds of soil., Supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete, Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level One Cement isto three coarse sand six graded stone aggregate twenty mm nominal size., RCCwork below and above plinth level up to floor five level One cement isto one point five coarse sand isto three graded stone aggegate twenty mm nominal size is to be provided., Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete., Centering and shuttering including strutting propping and removal of form for all heights., 15mm thick cement plaster on rough side of single or half brick wall of mix one cement isto six coarse sand to be provided., Neat Cement punning, Supply at site laying jointing including gasket nut bolts all complete miscellaneous DI fittings like DI bend mechanical joint TEE gland packing all item as per IS9523 for four hundred or five hundred mm dia DI specials with spigot and flange combination like bend tee of Class K12 suitable for push on jointing as per IS9523 pipe all complete.
6461-6470 of 6770 active Tenders