Printing Tenders

Printing Tenders

Technical Supervision Authority Tender

Others
Corrigendum : Closing Date Modified
Poland
Asking for the Cenna Information Na Zakup I Dostawa Nowych Part O along with Regeneration of the part of the Zamiens
Closing Date29 Jan 2025
Tender AmountRefer Documents 

Municipality Of Sibunag, Guimaras Tender

Civil And Construction...+2Civil Works Others, Construction Material
Philippines
Details: Description Republic Of The Philippines Province Of Guimaras Municipality Of Sibunag Bids And Awards Committee Invitation To Bid For Bid No. 2025-011 – Materials For Repair & Maintence Of Municipal Buildings And Facilities The Municipality Of Sibunag Through The 2025 Mo-mooe (repair & Maintence Of Municipal Buildings And Facilities) Intends To Apply The Sum Of One Hundred Fifty Thousand Four Hundred Thirty-five Pesos (150,435.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Bid No. 2025-011 – Materials For Repair & Maintence Of Municipal Buildings And Facilities. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Municipality Of Sibunag Now Invites Bids For Bid No. 2025-011 – Materials For Repair & Maintence Of Municipal Buildings And Facilities. Delivery Of The Goods Is Required 30 Calendar Days. Bidders Should Have Completed, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 3. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Sibunag And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 4:30 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 22 To 30, 2025 From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (p500.00). 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 1:00 Pm Of January 30, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 7. Bid Opening Shall Be On 1:15 Pm Of January 30, 2025 At Assessor’s Office, Sibunag Municipal Hall, Dasal, Sibunag, Guimaras. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Sibunag Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Engr. Zaldy C. Domalina Bac Chairperson Municipality Of Sibunag Dasal, Sibunag, Guimaras Cp # 09207155768 Engr. Zaldy C. Domalina Bac Chairperson Republic Of The Philippines Province Of Guimaras Municipality Of Sibunag Bids And Awards Committee -ooo- Subject: Bid Proposal Project: Materials For Reapir & Maintenance Of Municipal Buildings And Facilities Project Location: Municipal Site, Dasal, Sibunag, Guimaras Date/time Of Bidding: January 30, 2025, 1:00 Pm Item # Description Unit Qty Unit Cost Total Cost 1 Led Bulb 9 Watts Pcs 135 2 Gi Wire # 16 Kgs 3 3 Electrical Tape Rolls 30 4 Circuit Breaker 100 Amp (koten) Sets 3 5 Floodlight 50watts Sets 6 6 Duplex #4 Spool/ 100 M 3 7 Latex Paint Gals 15 8 Tinting Color Blue Liters 2 9 Tinting Color Red Liter 1 10 Paint Brush 4" Pcs 4 11 Baby Roller 6" Pcs 4 12 Paint Thinner Liters 2 13 Plywood 3/4 Marine Pcs 4 14 Welding Rod Kgs 10 15 Tex Screw 2.5" Pcs 200 16 Cutting Disc 4" Boxes 2 17 Drill Bit 5/32" Pcs 10 18 Drill Bit 1/4" Pcs 10 19 Dock Tape Rolls 8 20 Rope Yellow #14 Meters 80 21 Alum Pulley (big) Pcs 3 22 Gooseneck Faucet With Fittings (gym) Sets 5 75total Bid Amount: In Words: Prepared And Submitted By: ____________________________________ ___________________________ Signature Over Printed Name Name Of Firm ___________________________ Date Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Be: The Name Of The Contract Is Materials For Repair & Maintence Of Municipal Buildings And Facilities The Identification Number Of The Contract Is Bid No. 2025-011 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: The Amount Of Not Less Than Seven Thousand Five Hundred Twenty-one Pesos And 75/100 (7,521.75) If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or The Amount Of Not Less Four Thousand Five Hundred Thirteen Pesos And 05/100 (4,513.05) If Bid Security Is In Surety Bond. 19.3 In All Cases, The Nfcc Computation, If Applicable, Must Be Sufficient For All The Lots Or Contracts To Be Awarded To The Bidder. 20.2 Bidders Shall Submit License As Construction Materials And Supplies 21.2 Additional Contract Documents Relevant To The Project That May Be Required By Existing Law And/or The Procuring Entity.
Closing Date30 Jan 2025
Tender AmountPHP 150.4 K (USD 2.5 K)

Province Of Northern Samar Tender

Others
Philippines
Details: Description Republic Of The Philippines Province Of Northern Samar Catarman, Northern Samar [tab] Bids And Awards Committee Request For Quotation Name Of Supplier (business Name): Address: Tin: Date: January 24, 2025 Rfq No.: 25-01-0009 Contact No.: The Pao, Through The Bids And Awards Committee (bac), Intends To Procure General Merchandise, With Pr No.: 2025-01-0016. The General Merchandise Shall Be Procured Through The Alternative Mode Of Procurement In Accordance With Ra No. 9184 As Reflected On Bac Resolution No. Svp-01-24-01. Suppliers Of Know Qualifications Are Invited To Submit Their Quotation/proposal, Signed By Your Of Your Duly Authorized Representative Not Later Than ____________, Subject To The Terms And Conditions Provided In This Rfq. The Contract Shall Be Awared To The Supplier With The Lowest And Responsive Quotation. The Following Documents Are Required To Be Submitted Along With The Quotations/proposal: 1. Mayor's/business Permit 2. Philgeps Certificate Of Registration 3. Omnibus Sworn Statement Open Quotations May Be Submitted, Manually Or Through Email At The Address And Contact Numbers Indicated Below. For Queries, Your May Contact Us At (055) 500-2342 Or Email Address At Pgnsbac1 @gmail.com / Bac.alternative@outlook.com. Dr. Jose Luis A. Acompañado Bac Chairman Rfq No.: 25-01-0009 Pgns-bac-005-fm Rev.00 1 Of 4 Effectivity Date: July 17, 2023 After Having Carefully Ead And Accepted The Terms And Conditions, I/we Submit My/our Quotation/s For The Items As Follows: Rfq No.: 25-01-0009 Approved Budget For The Contract Quotation/offer Item No. Qty. Unit Item Description/technical Specifications Unit Price Total Price Unit Price Total Price Brand/model 1 2 Roll Nylon Rope #36 18mm Good Quality For The Boat Use 8,870.00 17,740.00 2 1 Bundle (100 Yards) B-net 54 - Fishing Net Height: 4.5 Feet 11,500.00 11,500.00 3 5 Kg. Nylon String Monoline 3.00mm 5 Coils/kilo White Color 550.00 2,750.00 4 1 Roll Polyethylene Net Green Color 1"" Hole 6 Feet X 50 Mesh X 90-100 Meters/roll 16,520.00 16,520.00 5 5 Bundle B-net (black) 100m/bundle 9,520.00 47,600.00 6 1 Roll Polyethylene Nylon Rope #10 (5mm) 200 Meters/roll 2,660.00 2,660.00 7 2 Roll Fine Mesh Net 30 Yards/roll 9,520.00 19,040.00 8 6 Roll Polyethylene Net, Green 400/6 X 12 X 200 Mesh X 100 Meters 16,500.00 99,000.00 9 30 Kg. Mononylon Line 2.0 Mm # 200 550.00 16,500.00 10 30 Kg. Mononylon Line 1.5 Mm # 200 550.00 16,500.00 11 30 Roll Polyethylene Twine, Green # 400/6 300.00 9,000.00 General Instructions: (1) Accomplish The Rfq Completely And Accurately. (2) Alteration Of This Form In Any Way Is Not Allowed. (3) Failure To Comply With Any Of The Technical Specifications Required Will Disqualify Your Quotation. (4) Failure To Follow These Instructions Will Disqualify Your Quotation. Pgns-bac-005-fm Rev.00 2 Of 4 Effectivity Date: July 17, 2023 Rfq No.: 25-01-0009 Approved Budget For The Contract Quotation/offer Item No. Qty. Unit Item Description/technical Specifications Unit Price Total Price Unit Price Total Price Brand/model 12 2 Bundle Pe Fishing Net Polyethylene Fishing Net Product Description: Product Type: Pe Knotted Fishing Net Raw Material: 100% Polyethylene Twine Type: Polyethylene Line Mesh Size: 2mm-200mm Total 10,000.00 20,000.00 278,810.00 Remarks: Mailyn Balleta Canvasser Pgns-bac-005-fm Rev.00 Proprietor/authorize Representative (signature Over Printed Name) 3 Of 4 Effectivity Date: July 17, 2023 Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information As Required In This Form. 2. The Price Quotation/s Shall Be Valid For A Period Of 60 Calendar Days From The Date Of Submission. 3. The Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties, And/or Levies Payable. 4. All Quotations Which Exceeds The Approved Budget For The Contract Shall Be Rejected. 5. The Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, And Other Terms And Conditions Stated Herein. 6. Any Alterations, Interlineations, Or Overwriting Shall Not Be Allowed Including The Terms And Conditions Of Rfq. 7. The Item/s Shall Be Delivered Within 30 Calendar Days From Receipt Of The Purchase Order. 8. The Provincial Government Of Northern Samar Shall Have The Right To Inspect And/or Test The Goods To Confirm Their Conformity To The Technical Specifications. Liquidated Damages Equivalent To One Tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Pgns Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies That The Pgns May Take. Pgns-bac-005-fm Rev.00 Rfq No.: 25-01-0009 4 Of 4 Effectivity Date: July 17, 2023
Closing Date28 Jan 2025
Tender AmountPHP 278.8 K (USD 4.7 K)

PHILIPPINE CROP INSURANCE CORPORATION REGION XII Tender

Publishing and Printing
Philippines
Details: Description 3 Box White Board Marker 14 Box Marker, Permanent Black 3 Box Marker, Permanent Blue 16 Box Marker, Flourescent 25 Box Ballpen Blue 30 Box Ballpen Black 5 Box Ballpen Red 16 Box Sign Pen (medium Tip) Black 14 Box Sign Pen (medium Tip) Blue 10 Box Sign Pen (medium Tip) Green 13 Box Pencil With Eraser 30 Pc. Record Book 500 Pages 30 Pc. Record Book 300 Pages 10 Pc. Clearbook A4 Size 150 Pc. Steno Notebook 210 Ream Bond Paper Short Sub16 450 Ream Bond Paper Long Sub16 450 Ream Bond Paper Short Sub20 450 Ream Bond Paper Long Sub20 170 Ream Bond Paper Long A4 15 Ream Colored Paper Long- Green 15 Ream Colored Paper Long- Blue 15 Ream Colored Paper Long- Pink 15 Ream Colored Paper Long- Yellow 0 Ream Mimeo Paper Long 20 Pack Photo Paper Long 20 Pack Photo Paper Short 30 Pack Sticker Paper Long 10 Pack Vellum Paper Long 10 Pack Vellum Paper Short 10 Pack Worx Paper A4 10 Pack Worx Paper Long 10 Pack Worx Paper Short 9 Box Envelope Extending 3 Ream Envelope Kraft Long 3 Ream Envelope Kraft Short 9 Ream Folder File Long 6 Ream Folder File Short 2 Ream Folder File Long Green 25 Pack Notepad Stick On, 50mm X 76mm 23 Box Notepad Stick On, 3mm X 76mm 5in1 5 Pack Index Tab 10 Pack Magnetic Sheet 10 Pack Magnetic Sheet With Adhesive 10 Ream Pvc Sheet Board 85 Bot. Epson Ink 003 Black 65 Bot. Epson Ink 003 Cyan 65 Bot. Epson Ink 003 Magenta 65 Bot. Epson Ink 003 Yellow 385 Bot. Universal Ink Black 385 Bot. Universal Ink Cyan 385 Bot. Universal Ink Magenta 385 Bot. Universal Ink Yellow 10 Bot. Sublimation Ink Black 10 Bot. Sublimation Ink Cyan 10 Bot. Sublimation Ink Magenta 10 Bot. Sublimation Ink Yellow 10 Bot. Pigment Ink Black 10 Bot. Pigment Ink Cyan 10 Bot. Pigment Ink Magenta 10 Bot. Pigment Ink Yellow 30 Box Cartridge Toner 2612a 3 Box Canon Cartridge Toner 285a 40 Box Printer Ribbon Lq310 25 Bot. Marker Ink 10 Bot. Trodat Ink 36 Bot. Stamp Pad Ink Violet 2 Bot. Stamp Pad Ink Red 2 Box Battery Dry Cell Size Aaa 10 Box Battery Dry Cell Size Aa 15 Pc. Flash Drive 2gb 5 Pc. Flash Drive 8gb 25 Pc. Stapler No:10 15 Pc. Stapler Standard Type 431 Box Staple Wire Standard 15 Pc. Staple Remover 25 Box Paper Clip, Vinyl/plastic Coated, 33mm 245 Box Paper Clip, Vinyl/plastic Coated, 50mm 30 Box Clip Backfold 15mm 30 Box Clip Backfold 19mm 30 Box Clip Backfold 25mm 30 Box Clip Backfold 32mm 30 Box Clip Backfold 41mm 30 Box Clip Backfold 51mm 20 Box Fastener 8 Inch 10 Box Fastener 2-3/4 (7 Cm) 10 Box Plastic Comb Ring Binder Rings 6mm 10 Box Plastic Comb Ring Binder Rings 10mm 10 Box Plastic Comb Ring Binder Rings 12mm 10 Box Plastic Comb Ring Binder Rings 14mm 10 Box Plastic Comb Ring Binder Rings 16mm 80 Pc. Scotch Tape 24mm 10 Pc. Scotch Tape 36mm 70 Pc. Packing Tape 36mm 30 Pc. Masking Tape 24mm 30 Pc. Masking Tape 36mm 30 Pc. Double Sided Tape 24mm 30 Pc. Double Sided Tape 36mm 30 Pc. Double Sided Tape Foam 77 Box Rubber Band No. 16 77 Box Rubber Band No. 18 17 Box Correction Tape 13 Pc. Calculator 14 Bot. Glue All-purpose 5 Pc. Stick Glue 10 Pc. Ruler Stainless 8 Pc. Pencil Sharpener 45 Pc. Stamp Pad 10 Pc. Tape Dispenser 25 Pc. Dater Stamp 16 Pc. Scissor 15 Pc. Clipboard Folder Organizer 60 Pc. Magazine File Box 60 Pc. Storage File Box 5 Pc. Puncher 1 Pc. Paper Cutter Board 15 Pc. Paper Cutter 6 Pc. Eraser-board 3 Pack Push Pin 2 Pc. Coarkboard With Frame 30 Pc. Clip Board 2 Box Laminating Film 65x95 2 Roll Laminating Film Roll 12"
Closing Date27 Jan 2025
Tender AmountPHP 600 K (USD 10.2 K)

Municipality Of Sibunag, Guimaras Tender

Civil And Construction...+1Others
Philippines
Details: Description Republic Of The Philippines Province Of Guimaras Municipality Of Sibunag Bids And Awards Committee Invitation To Bid For Bid No. 2025-006– Concreting Of Barangay Road The Municipality Of Sibunag Through The 2025 20% Df (concreting Of Barangay Road) Intends To Apply The Sum Of One Hundred Thousand Pesos (p500,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Bid No. 2025-006– Concreting Of Barangay Road. Bids Re-ceived In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Municipality Of Sibunag Now Invites Bids For Bid No. 2025-006– Concreting Of Barangay Road Bids Delivery Of The Infra Is Required Within Ninety (90) Calendar Days. Bidders Should Have Completed A Contract Within Ten (10) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regu-lations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Re-form Act”. 3. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Phil-ippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Simi-lar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Sibunag And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 4:30 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders January 21-30, 2025from The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Docu-ments In The Amount Of Five Hundred Pesos (p500.00). 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 1:00 Pm Of January 30, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 7. Bid Opening Shall Be On 1:15 Pm Of January 30, 2025 At Assessor’s Office, Sibunag Municipal Hall, Dasal, Sibunag, Guimaras. Bids Will Be Opened In The Presence Of The Bidders’ Representa-tives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Sibunag Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bid-ding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bid-ders. For Further Information, Please Refer To: Engr. Zaldy C. Domalina Bac Chairperson Municipality Of Sibunag Dasal, Sibunag, Guimaras Cp # 09207155768 Engr. Zaldy C. Domalina Bac Chairperson Republic Of The Philippines Province Of Guimaras Municipality Of Sibunag Bids And Awards Committee -ooo- Subject: Bid Proposal Project: Construction Of Septic Vault For Health Care Waste Project Location: Municipal Site, Dasal, Sibunag, Guimaras Date/time Of Bidding: January 30, 2025, 1:00 Pm Item # Description Unit Qty Unit Cost Total Cost 100 Clearing And Grubbing Sq.m. 72.00 105 Sub-grade Preparation Sq.m. 141.00 201 Aggregate Base Course (50% Iloilo River Source-50% White Rocks Buenavista Source) Cu.m. 47.70 311 Portland Cement Concrete Pavement (2mx200mmx22m And 5mx200mm Thkx 36 Meters) Sq.m. 224.00 Spl-1 Technical Supervision Days 30.00 Spl-2 Indirect Cost Lot 1.00 Total Bid Amount: In Words: Prepared And Submitted By: ____________________________________ ___________________________ Signature Over Printed Name Name Of Firm ___________________________ Date Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Words, Which Shall Be: Concreting Of Barangay Road 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Construction Foreman Skilled Mason Skilled Carpenter Skilled Electrician Skilled Welder Skilled Painter Unskilled Laborer Key Personnel General Experience Relevant Experience Building Construction Within 5years Of Experience Electrical Works Within 5years Of Experience 10.5 The Minimum Equipment Requirements Are The Following: Welding Machine Electric Drill Electric Sander Bar Cutter 1 Bagger Concrete Mixer Equipment Capacity Number Of Unit At Least 1 Unit 12 [insert Valve Engineering Clause If Allowed] N/a 15.1 The Bid Securing Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than P10,000.00(2%) Of P______if Bid Securing Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit: B. The Amount Of Not Less Than P25,000.00 (5%) Of P_________if Bid Security Is In Surety Bond. 20.3 Each Bidder Shall Submit [one (1)] Original And [two (2)] Copies Of The First And Sec-ond Components Of Its Bid. 21 Additional Contract Documents Relevant To The Project That May Be Required By Ex-isting Laws And/or The Procuring Entity, Such As Construction Schedule And S-curve, Manpower Schedule, Construction Methods, Equipment Utilization Schedule, Con-struction Safety And Health Program Approved By The Dole, And Other Acceptable Tools Of Project Scheduling.
Closing Date30 Jan 2025
Tender AmountPHP 500 K (USD 8.5 K)

Department Of Education Division Of Quezon Tender

Civil And Construction...+2Civil Works Others, Building Construction
Corrigendum : Closing Date Modified
Philippines
Details: Description Bids And Awards Committee Rfq No. 2025-01-rfqi-repost1 Date: January 2, 2025 Request For Quotation The Department Of Education, Division Of Quezon, Through Its Bids And Awards Committee (bac), Will Undertake Negotiated- Small Procurement For The Repair And Improvement Of Various Office At Deped Division Of Quezon Lot 1-3, In Accordance With Section 53.9 Of The Implementing Rules And Regulations Of Republic Act No. 9184. Name Of Project : Repair And Improvement Of Various Office At Deped Division Of Quezon Lot 1-3 Approved Budget For The Contract And Completion Period : Project Description Lot No. Location Approved Budget For The Contract (php) Contract Duration Repair And Improvement Of Various Offices At Deped Division Of Quezon Lot 1-3 1 Repair Of Administrative Section’s Comfort Room Ceiling & Pantry P13, 267.16 60 Calendar Days Upon Receipt Of Notice To Proceed Repair Of Budget Section’s Lavatory, Water Closet & Electrical P16, 814.22 Repair Of Osds Dry Wall Located At Staircase, Replacement Of Incandescent Bulb, Dorm’s Door & Water Pump P28, 173.20 Painting Of Library Hub’s Cabinets, Installation Of Window Blinds P73, 633.20 Repair Of Ict Section Ceiling , Painting, Electrical And Doors P25, 324.35 Installation Of Roofing Of Stairs Of Budget Office/ Human Resource Building P83,843.51 Total P240, 536.48 2 Repair Of Accounting Section’s Ceiling, Painting, Electrical & Doors P107, 791.19 60 Calendar Days Upon Receipt Of Notice To Proceed Repair Of Supply Section Roofing, Ceiling. Electrical And Painting P118, 223.42 Total P226, 014.61 3 Installation Of Fire Exit At Sds Office Building 204,848.85 60 Calendar Days Upon Receipt Of Notice To Proceed Over-all Total Of Abc P671,919.10 Specification : See Attached Annex “d” For The Technical Specification Location : Deped Division Of Quezon, Pagbilao, Quezon Delivery Term : Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed Interested Bidders Are Required To Submit Their Valid And Current Mayor’s Permit, Income/business Tax Return (for Abcs Above Php500k), Philgeps Registration Number, Omnibus Sworn Statement, Upon Submission Of Quotation. Philgeps Platinum Membership May Be Submitted In Lieu Of The Mayor’s/ Business Permit And The Philgeps Registration Number. Award Of Contract Shall Be Made To The Lowest Quotation On A Per Lot Basis, Which Complies With The Minimum Description As Stated Above And Other Terms And Conditions Stated In The Price Quotation Form. Any Interlineation, Erasures Or Overwriting Shall Be Valid Only If There Are Signed Or Initialed By The Bidder Or His/her Duly Authorized Representative/s. Submission Of Quotation And Eligibility Documents Is On Or Before 3:00 P.m. Of January 6, 2025 At Deped, Division Of Quezon, Talipan, Pagbilao, Quezon. Please Submit Your Quotation In A Sealed Envelope Addressed To: Joepi F. Falqueza Bac Chairman Bids And Awards Committee Deped, Division Of Quezon Talipan, Pagbilao, Quezon For Inquiries, You May Contact Us At Cellphhone Nos. 0939-174-4413 Look For Danica May V. Jaranilla Or You May Visit The Following Websites: For Downloading Of Request For Quotation: • Philgeps: Https://notices.philgeps.gov.ph/ • Deped-quezon Website: Www.depedquezon.com.ph Very Truly Yours, (sgd)joepi F. Falqueza Bac Chairperson Checklist Of Eligibility And Technical Documents For Submission Class “a” Documents (1) Legal Documents O Philgeps Registration O Mayor’s/business Permit O Dti/ Sec Registration O Bir Certificate Of Registration O Pcab License O Income/ Business Tax Return (for Abcs Above P500k) (2) Technical Documents O Omnibus Sworn Statement O Authority Of The Signatory Class “b” Documents • Jva Or The Duly Notarized Statement In Accordance With Section 23.1(b) Of The 2016 Revised Irr, If Applicable Notes: 1. All Documents Must Be Prepared In Two (2) Sets Of Copies, One (1) Original Copy And One (1) Photocopy 2. The Proposal Shall Be Accompanied By The Aforementioned Documents, Otherwise, Non-submission Of Which Shall Result To Disqualification Of Proposal. 3. Documents Must Be Fastened To Avoid Missing Of Pages And Must Be Have Ear Tags For Easy Identification Lot 1 Annex C _______________________ Date The Bids And Awards Committees Deped, Division Of Quezon Talipan, Pagbilao, Quezon Sir/ Madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Items/s As Follows: Project Description Lot No. Location Unit Cost Total Cost Repair And Improvement Of Various Offices At Deped Division Of Quezon Lot 1-3 1 Repair Of Administrative Section’s Comfort Room Ceiling & Pantry P13, 267.16 Repair Of Budget Section’s Lavatory, Water Closet & Electrical P16, 814.22 Repair Of Osds Dry Wall Located At Staircase, Replacement Of Incandescent Bulb, Dorm’s Door & Water Pump P28, 173.20 Painting Of Library Hub’s Cabinets, Installation Of Window Blinds P73, 633.20 Repair Of Ict Section Ceiling , Painting, Electrical And Doors P25, 324.35 Installation Of Roofing Of Stairs Of Budget Office/ Human Resource Building P83,843.51 Total P240, 536.48 Total Amount In Words: _________________________________________________________________________________________. _______________________________________________________ Signature Over Printed Name Of Bidder Lot 1 Program Of Works And Detailed Estimate Project : Repair Of Administrative Section's Comfort Room Ceiling & Pantry 9.0000 Ceiling And Carpentry Works @comfort Room's Ceiling Hardilite Board, (3.5mm Thk) 4' X 8' Pc 2.00 Hardiflex Nail 1 -1/4" Kg 0.50 10.0000 Electrical Works @comfort Room's Ceiling Incandescent Bulb (included 5 Pcs @hr) Pc 7.00 10.1600 3.5 Mm² Thhn Wire, Stranded M 3.00 11.0000 Plumbing Works @pantry 11.0410 Faucet, Lavatory Pc 1.00 11.4200 Teflon Tape Pc 1.00 13.0000 Painting Works @comfort Room's Ceiling 13.0100 Neutralizer L 1.00 13.0200 Latex, Flat Gal 1.00 13.0500 Acri Color Gal 1.00 13.0700 Glazing Putty Gal 1.00 13.0900 Paint Thinner Gal 1.00 13.0700 Glazing Putty L 1.00 Sandpaper (fine Grit 220-320) Sheet 2.00 Roller Pc 2.00 Brush Pc 2.00 Masking Tape Pc 1.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 1.00 14.0000 Tile Works @pantry 14.0120 Glazed Wall Tiles 60cm X 60cm Pc 8.00 14.0300 Tile Adhesive 25 Kg/bag Bag 1.00 14.0400 Tile Trim 6mm Pc 1.00 14.0500 Tile Grout 5 Kg/bag Bag 1.00 2.0200 Portland Cement Bag 1.00 2.0500 Washed Sand Bag 2.00 15.0000 Waterproofing @comfort Room 15.0100 Waterproofing, Cementitious Gal 2.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Program Of Works And Detailed Estimate Project : Repair Of Budget Section's Lavatory, Water Closet & Electrical Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor General Requirements 10.0000 Electrical Works Three-gang, Convenience Outlet, Grounding Type Pc 1.00 11.0000 Plumbing Works @comfort Room 11.0600 Lavatory, Pedestal Type With Accessories Set 1.00 11.0200 Water Closet 1.6gpf With Accessories Set 1.00 11.4200 Teflon Tape Pc 2.00 14.0000 Tile Works @pantry 14.0120 Glazed Wall Tiles 60cm X 60cm Pc 4.00 14.0300 Tile Adhesive 25 Kg/bag Bag 1.00 14.0400 Tile Trim 6mm Pc 1.00 14.0500 Tile Grout 5 Kg/bag Bag 1.00 2.0200 Portland Cement Bag 1.00 2.0500 Washed Sand Bag 1.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Program Of Works And Detailed Estimate Project : Repair Of Osds's Dry Wall Located At Staircase, Replacement Of Incandescent Bulb, Dorm's Door & Water Pump Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor General Requirements 6.0000 Doors 6.0320 D-1, Panel Door 0.90m X 2.10m On 150mm Wooden Jamb Complete With Accessories (lever Type Door Knob) Set 1.00 12.0000 Sanitary Works 11.2100 Pp-r Elbow 90˚ X 3/4"ø Pc 5.00 11.3300 Pp-r Plug, 3/4"ø Pc 8.00 11.4200 Teflon Tape Pc 2.00 12.3000 Pvc Cement Pc 1.00 12.3000 Water Pump Lot 1.00 Stainless Steel Cylindrical Overhead Water Tank (200 L) Lot 1.00 13.0000 Painting Works @front Door 13.0100 Neutralizer L 1.00 13.1300 Gloss Acrylic Paint L 1.00 Sandpaper (fine Grit 220-320) Sheet 1.00 Roller Pc 1.00 Brush Pc 1.00 Masking Tape Pc 1.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 1.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Program Of Works And Detailed Estimate Project : Painting Of Library Hub's Cabinets And Installation Of Window Blinds Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor General Requirements 6.0000 Window Blinds Blinds Sq.ft 172.22 11.0000 Plumbing Works @male & Female Comfort Room 11.0300 Urinal 0.8gpf Pc 1.00 11.0410 Faucet, Lavatory Pc 2.00 Bidet Pc 1.00 11.4200 Teflon Tape Pc 2.00 13.0000 Painting Works Cabinets & Cabinet Door Repair 13.0100 Neutralizer L 2.00 13.0200 Latex, Flat Gal 2.00 13.0500 Acri Color Gal 2.00 13.0900 Paint Thinner L 1.00 Sandpaper (fine Grit 220-320) Sheet 5.00 Roller Pc 3.00 Brush Pc 3.00 Masking Tape Pc 2.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 3.00 Cabinet Door Repair L.s 1.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Program Of Works And Detailed Estimate Project Repair Of Ict Section's Ceiling, Painting, Electrical & Doors Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor General Requirements 9.0000 Ceiling And Carpentry Works Hardilite Board, (3.5mm Thk) 4' X 8' Pc 5.00 Hardiflex Nail 1 -1/4" Kg 2.00 10.0000 Electrical Works Pinlight Pc 5.00 13.0000 Painting Works 13.0100 Neutralizer Gal 3.00 13.0200 Latex, Flat Gal 9.00 13.0500 Acri Color Gal 3.00 13.0700 Glazing Putty Gal 3.00 13.0900 Paint Thinner Gal 1.00 13.0700 Glazing Putty Gal 3.00 Sandpaper (fine Grit 220-320) Sheet 5.00 Roller Pc 3.00 Brush Pc 3.00 Masking Tape Pc 3.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 1.00 8.1300 Roof Sealant L 2.00 Roof Guard Gal 4.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Program Of Works And Detailed Estimate Project Repainting Budget Office/human Resource Building And Installation Of Roofing Of Stairs Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor 8.0600 G.i. Long-span Roofing, Corrugated, Pre-painted, 1220mm X 0.5mm Bmt Lm 35.00 G.i. Pipe 3"ø Sch.40 Pc 11.00 2.0200 Portland Cement Bag 10.00 2.0500 Washed Sand Cu.m 0.50 2.0300 Crushed Gravel 3/4" Cu.m 1.00 7.1000 L 50 X 50 X 5mm Kg 89.31 7.0200 Lc 100 X 75 X 30 X 2.5mm Kg 295.82 7.3600 Welding Rod Kg 13.48 8.0700 G.i. Ridge Roll, Preformed, Pre-painted, 0.610m X 2.440m X 0.5mm Bmt Pc 5.00 Sub-total Direct Cost Indirect Cost 22% Of (i) Tax 5% Of (i + Ii) Total Construction Cost (i + Ii + Iii) Lot 1 “annex D” Technical Specification Bidders Must State Here Either “comply” Or Any Equivalent Term In The Column “bidders Statement Of Compliance” Against Each Of The Individual Parameters Of Each “specification”. Item No. Description Unit Qty Statement Of Compliance Repair Of Administrative Section’s Comfort Room Ceiling & Pantry 9.0000 Ceiling And Carpentry Works @comfort Room's Ceiling Hardilite Board, (3.5mm Thk) 4' X 8' Pc 2.00 Hardiflex Nail 1 -1/4" Kg 0.50 10.0000 Electrical Works @comfort Room's Ceiling Incandescent Bulb (included 5 Pcs @hr) Pc 7.00 10.1600 3.5 Mm² Thhn Wire, Stranded M 3.00 11.0000 Plumbing Works @pantry 11.0410 Faucet, Lavatory Pc 1.00 11.4200 Teflon Tape Pc 1.00 13.0000 Painting Works @comfort Room's Ceiling 13.0100 Neutralizer L 1.00 13.0200 Latex, Flat Gal 1.00 13.0500 Acri Color Gal 1.00 13.0700 Glazing Putty Gal 1.00 13.0900 Paint Thinner Gal 1.00 13.0700 Glazing Putty L 1.00 Sandpaper (fine Grit 220-320) Sheet 2.00 Roller Pc 2.00 Brush Pc 2.00 Masking Tape Pc 1.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 1.00 14.0000 Tile Works @pantry 14.0120 Glazed Wall Tiles 60cm X 60cm Pc 8.00 14.0300 Tile Adhesive 25 Kg/bag Bag 1.00 14.0400 Tile Trim 6mm Pc 1.00 14.0500 Tile Grout 5 Kg/bag Bag 1.00 2.0200 Portland Cement Bag 1.00 2.0500 Washed Sand Bag 2.00 15.0000 Waterproofing @comfort Room 15.0100 Waterproofing, Cementitious Gal 2.00 Repair Of Budget Section's Lavatory, Water Closet & Electrical General Requirements 10.0000 Electrical Works Three-gang, Convenience Outlet, Grounding Type Pc 1.00 11.0000 Plumbing Works @comfort Room 11.0600 Lavatory, Pedestal Type With Accessories Set 1.00 11.0200 Water Closet 1.6gpf With Accessories Set 1.00 11.4200 Teflon Tape Pc 2.00 14.0000 Tile Works @pantry 14.0120 Glazed Wall Tiles 60cm X 60cm Pc 4.00 14.0300 Tile Adhesive 25 Kg/bag Bag 1.00 14.0400 Tile Trim 6mm Pc 1.00 14.0500 Tile Grout 5 Kg/bag Bag 1.00 2.0200 Portland Cement Bag 1.00 2.0500 Washed Sand Bag 1.00 Project : Repair Of Osds's Dry Wall Located At Staircase, Replacement Of Incandescent Bulb, Dorm's Door & Water Pump General Requirements 6.0000 Doors 6.0320 D-1, Panel Door 0.90m X 2.10m On 150mm Wooden Jamb Complete With Accessories (lever Type Door Knob) Set 1.00 12.0000 Sanitary Works 11.2100 Pp-r Elbow 90˚ X 3/4"ø Pc 5.00 11.3300 Pp-r Plug, 3/4"ø Pc 8.00 11.4200 Teflon Tape Pc 2.00 12.3000 Pvc Cement Pc 1.00 12.3000 Water Pump Lot 1.00 Stainless Steel Cylindrical Overhead Water Tank (200 L) Lot 1.00 13.0000 Painting Works @front Door 13.0100 Neutralizer L 1.00 13.1300 Gloss Acrylic Paint L 1.00 Sandpaper (fine Grit 220-320) Sheet 1.00 Roller Pc 1.00 Brush Pc 1.00 Masking Tape Pc 1.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 1.00 Painting Of Library Hub's Cabinets And Installation Of Window Blinds General Requirements 6.0000 Window Blinds Blinds Sq.ft 172.22 11.0000 Plumbing Works @male & Female Comfort Room 11.0300 Urinal 0.8gpf Pc 1.00 11.0410 Faucet, Lavatory Pc 2.00 Bidet Pc 1.00 11.4200 Teflon Tape Pc 2.00 13.0000 Painting Works Cabinets & Cabinet Door Repair 13.0100 Neutralizer L 2.00 13.0200 Latex, Flat Gal 2.00 13.0500 Acri Color Gal 2.00 13.0900 Paint Thinner L 1.00 Sandpaper (fine Grit 220-320) Sheet 5.00 Roller Pc 3.00 Brush Pc 3.00 Masking Tape Pc 2.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 3.00 Cabinet Door Repair L.s 1.00 Repair Of Ict Section's Ceiling, Painting, Electrical & Doors General Requirements 9.0000 Ceiling And Carpentry Works Hardilite Board, (3.5mm Thk) 4' X 8' Pc 5.00 Hardiflex Nail 1 -1/4" Kg 2.00 10.0000 Electrical Works Pinlight Pc 5.00 13.0000 Painting Works 13.0100 Neutralizer Gal 3.00 13.0200 Latex, Flat Gal 9.00 13.0500 Acri Color Gal 3.00 13.0700 Glazing Putty Gal 3.00 13.0900 Paint Thinner Gal 1.00 13.0700 Glazing Putty Gal 3.00 Sandpaper (fine Grit 220-320) Sheet 5.00 Roller Pc 3.00 Brush Pc 3.00 Masking Tape Pc 3.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 1.00 Stirrer Pc 1.00 8.1300 Roof Sealant L 2.00 Roof Guard Gal 4.00 Repainting Budget Office/human Resource Building And Installation Of Roofing Of Stairs 8.0600 G.i. Long-span Roofing, Corrugated, Pre-painted, 1220mm X 0.5mm Bmt Lm 35.00 G.i. Pipe 3"ø Sch.40 Pc 11.00 2.0200 Portland Cement Bag 10.00 2.0500 Washed Sand Cu.m 0.50 2.0300 Crushed Gravel 3/4" Cu.m 1.00 7.1000 L 50 X 50 X 5mm Kg 89.31 7.0200 Lc 100 X 75 X 30 X 2.5mm Kg 295.82 7.3600 Welding Rod Kg 13.48 8.0700 G.i. Ridge Roll, Preformed, Pre-painted, 0.610m X 2.440m X 0.5mm Bmt Pc 5.00 I Hereby Certify To Comply With All The Above Details On The Program Of Works And Bill Of Quantities. ____________ ______________________________________ _______________ Name Of Bidder Signature Over Printed Name Of Representative Date Lot 2 Annex C _______________________ Date The Bids And Awards Committees Deped, Division Of Quezon Talipan, Pagbilao, Quezon Sir/ Madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Items/s As Follows: Project Description Lot No. Location Unit Cost Total Cost Repair And Improvement Of Various Offices At Deped Division Of Quezon Lot 1-3 2 Repair Of Accounting Section’s Ceiling, Painting, Electrical & Doors P107, 791.19 Repair Of Supply Section Roofing, Ceiling. Electrical And Painting P118, 223.42 Total P226, 014.61 Total Amount In Words: _________________________________________________________________________________________. _______________________________________________________ Signature Over Printed Name Of Bidder Program Of Works And Detailed Estimate Project Repair Of Accounting Section's Ceiling, Painting, Electrical & Doors Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor General Requirements 6.0000 Doors @1st Floor Of Accounting Section Set 1.00 6.0400 Doorknob Flush Door Set 1.00 Refurbisment Of Sliding Door @2nd Floor Of Accounting Section Set 1.00 6.0400 Flush Door Set 1.00 Refurbisment Of Sliding Door 9.0000 Ceiling And Carpentry Works @2nd Floor Of Accounting Section Pc 57.00 Hardilite Board, (3.5mm Thk) 4' X 8' Kg 10.00 Hardiflex Nail 1 -1/4" Pc 2.00 9.1400 25mm X 25mm X 300mm Wood Slats @25mm Clear Spacing Ceiling Ventilation (provide Stainless Steel Wire Mesh Inside) 10.0000 Electrical Works @2nd Floor Of Accounting Section Set 1.00 10.3600 1 -18w, 230v, 60hz Ac, Compact Fluorescent Lighting Fixture With Medium Base Keyless Type Porcelain Receptacle Pc 11.00 Three-gang, Convenience Outlet, Grounding Type Pc 2.00 9.1400 25mm X 25mm X 300mm Wood Slats @25mm Clear Spacing Ceiling Ventilation (provide Stainless Steel Wire Mesh Inside) Pc 1.00 Flush-mounted, Enclosure, 12 Branches 11.0000 Plumbing Works @2nd Floor Of Accounting Section Pc 1.00 11.0410 Faucet, Lavatory Pc 5.00 12.0600 Pvc Sanitary Pipe 3"ø X 3.0m Pc 1.00 12.3000 Pvc Cement Pc 2.00 Bidet Pc 2.00 11.4200 Teflon Tape @1st Floor Of Accounting Section Pc 1.00 11.0410 Faucet, Lavatory 13.0000 Painting Works @2nd Floor Of Accounting Section Gal 4.00 13.0100 Neutralizer Gal 12.00 13.0200 Latex, Flat Gal 4.00 13.0500 Acri Color Gal 4.00 13.0700 Glazing Putty Gal 1.00 13.0900 Paint Thinner Gal 4.00 13.0700 Glazing Putty Sheet 15.00 Sandpaper (fine Grit 220-320) Pc 8.00 Roller Pc 4.00 Brush Pc 4.00 Masking Tape Sheet 2.00 Plastic Sheet Pc 4.00 Paint Tray Pc 4.00 Stirrer 15.0000 Waterproofing @2nd Floor Of Accounting Section Gal 10.00 15.0100 Waterproofing, Cementitious Set 1.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Program Of Works And Detailed Estimate Project Repair Of Supply Section's Roofing, Ceiling, Electrical & Painting Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor General Requirements 8.0000 Roofing Works 7.1000 L 50 X 50 X 5mm Kg 117.75 7.3600 Welding Rod Kg 1.00 Corr. Prepainted Long Span Roofing ( 0.6 Mm ) L.m 120.00 8.1001 Teckscrew 2-3/4" Pc 500.00 8.1300 Roof Sealant L 5.00 9.0000 Ceiling And Carpentry Works Hardilite Board, (3.5mm Thk) 4' X 8' Pc 20.00 Hardiflex Nail 1 -1/4" Kg 5.00 9.1400 25mm X 25mm X 300mm Wood Slats @25mm Clear Spacing Ceiling Ventilation (provide Stainless Steel Wire Mesh Inside) Pc 2.00 13.0000 Painting Works 13.0100 Neutralizer Gal 4.00 13.0200 Latex, Flat Gal 12.00 13.0500 Acri Color Gal 4.00 13.0700 Glazing Putty Gal 4.00 13.0900 Paint Thinner Gal 1.00 13.0700 Glazing Putty Gal 4.00 Sandpaper (fine Grit 220-320) Sheet 10.00 Roller Pc 6.00 Brush Pc 3.00 Masking Tape Pc 3.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 3.00 Stirrer Pc 1.00 Sub Total Materials (vat Inclusive) Labor Direct Cost Lot 2 “annex D” Technical Specification Bidders Must State Here Either “comply” Or Any Equivalent Term In The Column “bidders Statement Of Compliance” Against Each Of The Individual Parameters Of Each “specification”. Item No. Description Unit Qty Statement Of Compliance Repair Of Accounting Section's Ceiling, Painting, Electrical & Doors General Requirements 6.0000 Doors Set 1.00 @1st Floor Of Accounting Section Set 1.00 6.0400 Doorknob Flush Door Refurbisment Of Sliding Door Set 1.00 @2nd Floor Of Accounting Section Set 1.00 6.0400 Flush Door Refurbisment Of Sliding Door 9.0000 Ceiling And Carpentry Works Pc 57.00 @2nd Floor Of Accounting Section Kg 10.00 Hardilite Board, (3.5mm Thk) 4' X 8' Pc 2.00 Hardiflex Nail 1 -1/4" 9.1400 25mm X 25mm X 300mm Wood Slats @25mm Clear Spacing Ceiling Ventilation (provide Stainless Steel Wire Mesh Inside) 10.0000 Electrical Works Set 1.00 @2nd Floor Of Accounting Section Pc 11.00 10.3600 1 -18w, 230v, 60hz Ac, Compact Fluorescent Lighting Fixture With Medium Base Keyless Type Porcelain Receptacle Pc 2.00 Three-gang, Convenience Outlet, Grounding Type Pc 1.00 9.1400 25mm X 25mm X 300mm Wood Slats @25mm Clear Spacing Ceiling Ventilation (provide Stainless Steel Wire Mesh Inside) Flush-mounted, Enclosure, 12 Branches 11.0000 Plumbing Works Pc 1.00 @2nd Floor Of Accounting Section Pc 5.00 11.0410 Faucet, Lavatory Pc 1.00 12.0600 Pvc Sanitary Pipe 3"ø X 3.0m Pc 2.00 12.3000 Pvc Cement Pc 2.00 Bidet 11.4200 Teflon Tape Pc 1.00 @1st Floor Of Accounting Section 11.0410 Faucet, Lavatory 13.0000 Painting Works Gal 4.00 @2nd Floor Of Accounting Section Gal 12.00 13.0100 Neutralizer Gal 4.00 13.0200 Latex, Flat Gal 4.00 13.0500 Acri Color Gal 1.00 13.0700 Glazing Putty Gal 4.00 13.0900 Paint Thinner Sheet 15.00 13.0700 Glazing Putty Pc 8.00 Sandpaper (fine Grit 220-320) Pc 4.00 Roller Pc 4.00 Brush Sheet 2.00 Masking Tape Pc 4.00 Plastic Sheet Pc 4.00 Paint Tray Stirrer 15.0000 Waterproofing Gal 10.00 @2nd Floor Of Accounting Section Set 1.00 15.0100 Waterproofing, Cementitious Set 1.00 Repair Of Supply Section's Roofing, Ceiling, Electrical & Painting General Requirements 8.0000 Roofing Works 7.1000 L 50 X 50 X 5mm Kg 117.75 7.3600 Welding Rod Kg 1.00 Corr. Prepainted Long Span Roofing ( 0.6 Mm ) L.m 120.00 8.1001 Teckscrew 2-3/4" Pc 500.00 8.1300 Roof Sealant L 5.00 9.0000 Ceiling And Carpentry Works Hardilite Board, (3.5mm Thk) 4' X 8' Pc 20.00 Hardiflex Nail 1 -1/4" Kg 5.00 9.1400 25mm X 25mm X 300mm Wood Slats @25mm Clear Spacing Ceiling Ventilation (provide Stainless Steel Wire Mesh Inside) Pc 2.00 13.0000 Painting Works 13.0100 Neutralizer Gal 4.00 13.0200 Latex, Flat Gal 12.00 13.0500 Acri Color Gal 4.00 13.0700 Glazing Putty Gal 4.00 13.0900 Paint Thinner Gal 1.00 13.0700 Glazing Putty Gal 4.00 Sandpaper (fine Grit 220-320) Sheet 10.00 Roller Pc 6.00 Brush Pc 3.00 Masking Tape Pc 3.00 Plastic Sheet Sheet 1.00 Paint Tray Pc 3.00 Stirrer Pc 1.00 I Hereby Certify To Comply With All The Above Details On The Program Of Works And Bill Of Quantities. ____________ ______________________________________ _______________ Name Of Bidder Signature Over Printed Name Of Representative Date Lot 3 Annex C _______________________ Date The Bids And Awards Committees Deped, Division Of Quezon Talipan, Pagbilao, Quezon Sir/ Madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Items/s As Follows: Project Description Lot No. Location Unit Cost Total Cost Repair And Improvement Of Various Offices At Deped Division Of Quezon Lot 1-3 3 Installation Of Fire Exit At Sds Office Building 204,848.85 Total Amount In Words: _________________________________________________________________________________________. _______________________________________________________ Signature Over Printed Name Of Bidder Program Of Works And Detailed Estimate Project Instalaltion Of Fire Exit Of Sds Office Item No. Description Unit Qty Unit Cost Total Cost Grand Total Material Labor Material Labor Sds Fire Exit 7.3600 Welding Rod Kg 66.17 7.1010 L 50 X 50 X 2mm Kg 215.00 7.1000 L 50 X 50 X 5mm Kg 784.34 7.0400 L 75 X 75 X 5.00mm Kg 891.26 7.1050 Flat Bar 1" X ¼" Kg 51.52 7.1820 Machine Bolts ( 16 Mm Dia. ) Pc 24.00 13.0400 Latex, Semi Gloss Gal 3.00 13.0200 Latex, Flat Gal 3.00 13.0300 Masonry Putty Gal 1.00 13.1100 Primer, Zinc Chromate Gal 2.00 13.1000 Lacquer Thinner Gal 1.00 2.0200 Portland Cement Bag 5.00 2.0300 Crushed Gravel 3/4" Cu.m 1.00 2.0500 Washed Sand Cu.m 1.00 3.1100 D12mm X 6.00 Mts Rsb Pc 3.00 3.1200 G.i. Tie Wire Kg 1.00 Sliding Window, Analoc Frame, Tinted Glass, With Heavy Duty Accessories Sq.m. 2.10 Glass Door, Analoc Frame, Tinted Glass, 2-way Swing (1.00m X 2.10m), With Heavy Duty Accessories Set 1.00 Sub-total Direct Cost Indirect Cost 22% Of (i) Tax 5% Of (i + Ii) Total Construction Cost (i + Ii + Iii) Lot 3 “annex D” Technical Specification Bidders Must State Here Either “comply” Or Any Equivalent Term In The Column “bidders Statement Of Compliance” Against Each Of The Individual Parameters Of Each “specification”. Item No. Description Unit Qty Statement Of Compliance Instalaltion Of Fire Exit Of Sds Office Sds Fire Exit 7.3600 Welding Rod Kg 66.17 7.1010 L 50 X 50 X 2mm Kg 215.00 7.1000 L 50 X 50 X 5mm Kg 784.34 7.0400 L 75 X 75 X 5.00mm Kg 891.26 7.1050 Flat Bar 1" X ¼" Kg 51.52 7.1820 Machine Bolts ( 16 Mm Dia. ) Pc 24.00 13.0400 Latex, Semi Gloss Gal 3.00 13.0200 Latex, Flat Gal 3.00 13.0300 Masonry Putty Gal 1.00 13.1100 Primer, Zinc Chromate Gal 2.00 13.1000 Lacquer Thinner Gal 1.00 2.0200 Portland Cement Bag 5.00 2.0300 Crushed Gravel 3/4" Cu.m 1.00 2.0500 Washed Sand Cu.m 1.00 3.1100 D12mm X 6.00 Mts Rsb Pc 3.00 3.1200 G.i. Tie Wire Kg 1.00 Sliding Window, Analoc Frame, Tinted Glass, With Heavy Duty Accessories Sq.m. 2.10 Glass Door, Analoc Frame, Tinted Glass, 2-way Swing (1.00m X 2.10m), With Heavy Duty Accessories Set 1.00 I Hereby Certify To Comply With All The Above Details On The Program Of Works And Bill Of Quantities. ____________ ______________________________________ _______________ Name Of Bidder Signature Over Printed Name Of Representative Date
Closing Date6 Jan 2025
Tender AmountPHP 671.9 K (USD 11.5 K)

Landkreis Havelland Der Landrat Tender

Others
Germany
Details: The aim is to conclude a full-service rental agreement with a company for a period of 60 months (performance period from March 1, 2025 to February 28, 2030) for an A3 color multifunction device for paper formats up to A3 and with a print speed of at least 70 A4 pages/minute - including copyright fee, delivery, installation, commissioning, setup support, software required for operation, service and business liability insurance. The expected monthly print volume is 60,000 free black/white copies and 15,000 free color copies. The device serves as a replacement for the existing production printing system in the central copying center of the Havelland district at Platz Der Freiheit 1, 14712 Rathenow. Operational readiness must be guaranteed by March 1, 2025. The contract period begins after acceptance by the client. Paper and staples are not part of the contract.
Closing Date17 Jan 2025
Tender AmountRefer Documents 

VETERANS AFFAIRS, DEPARTMENT OF USA Tender

Healthcare and Medicine
United States
Details: Page 3 Of 3 sources Sought Synopsis the Department Of Veterans Affairs Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Firms Having An Interest In And The Resources To Support A Requirement For The Vyntus Cpx/flex Plan Service Contract At The Jesse Brown Va Medical Center (jbvamc. The Result Of This Market Research May Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 811210 Electronic And Precision Equipment Repair And Maintenance. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. tentative Requirements: statement Of Work vyntus Cpx/flex Plan Service Contract 1. Description Of Services the Contractor Shall Provide All Labor, Material, Tools, Travel, Management, And Equipment Necessary To Provide Services Such As Upgrades, Repair, Preventative Maintenance And/or Replacement Equipment For The Pulmonary Function Testing And The Cardiopulmonary Exercise Test Equipment At The Jesse Brown Va Medical Center (jesse Brown Vamc) Located At 820 S. Damen Avenue, Chicago, Illinois 60612. This Is A Base Plus Three (3) Option Year(s) Contract. 2. Background the Jesse Brown Va Medical Center In The Pulmonary Function Lab Is Requesting A Service Contract For Existing Equipment That Was Purchased In September 2016. The Contractor Shall Provide For The Continuum Of Services Such As Upgrades, Repair, Preventative Maintenance And/or Replacement Of The Diagnostic Equipment In The Event Of Malfunction Or Destroyed Parts From The Normal Wear And Tear Of Use. Due To The Highly Specialized And Technical Equipment Requiring Specialized Training And Non-substitutable Parts Required For The Existing Equipment, Only Those Vendors That Specialize With The Software And Hardware Of Jaeger Masterscreen, Sentrysuite And Vyntus Equipment Shall Be Acceptable For Coverage Of This Equipment. 3. Objectives this Service Contract Shall Be Utilized For Performing Preventative Maintenance And Repair Or Replacement Of Malfunctioning Equipment Or Parts. The Services And Personnel Shall Be Provided By The Contractor Who Have Specifically Trained Field Support Representatives And In Coordination, When Needed, By Technical Support Specialists For All Repair, Updates, And Upgrades Of Jaeger Master Screen, Sentry Suite And Vyntus Equipment. The Parts Required For The Repair Of This Equipment Are Specifically Designed And Are Not Substitutable. The Trained Field Support Representatives Provided By The Company Shall Minimize The Potential Of Repair Delays Caused By Misdiagnosis Of Equipment Issues And Incorrect Parts Being Ordered. The Minimization Of Delays Of Veteran Care Due To Equipment That Is Down Shall Be Limited To The Time Period Required For The Appropriate Acquisition Of Equipment And Its Efficient Repair By The Company S Representatives. 4. Scope service Maintenance Call For Equipment the Contractor Shall Provide All Parts For The Year Plus Labor And Travel Expenses For One Preventive Maintenance Call (pmc) (if Needed To Meet Factory Recommended Pm Intervals) And Up To Three On-site Service Calls Per Instrument. The Contractor Shall Provide All Applicable Software Revisions Within The Purchased Version Of Operating Software At No Additional Charge. services Maintenance Call For Parts Only parts Only - Provides For All Replacement/exchange Service Parts And Components Needed For repairs. Additional Features Of This Contract Option Include: a) Software Updates - Includes Revisions To The Originally Purchased Version Of Jaeger Masterscreen, Sentrysuite Or Vyntus Equipment Operating Software And Tutorials At No Additional Charge. b) Software Upgrades - A) Jaeger Or Sentrysuite Equipment Operating Software Upgrades When They Become Available, B) Windows Operating Software And C) Related Hardware (computer And Printer) If Required For Compatibility With Vmax Software Upgrades. c) Peripherals Protection - Provides For Parts Replacements And Coverage For The Computer, Printer, And Associated Components. d) Preferred Tech Support Assistance Shall Have At Minimum Availability Monday Through Friday From 8:00 A.m. To 4:30 P.m. Local Time (cst). e) Field Service Labor Qualified Service Technicians And Technical Support Personnel Shall Be Provided By The Contractor. 5. Requirements the Contractor Shall Fulfill The Agreement As Indicated To Perform All Upgrades, Repairs, And Replacements Of Equipment On Request Within A Reasonable Amount Of Time As Agreed On By The Contractor And Buyer. All Upgrades And Repairs Shall Be Performed By The Contractor S Representative(s) Within The Agreed Upon Time Frame And In The Presence Of The Jesse Brown Va Medical Center S Pulmonary Function Lab Technicians And/or Bio-medical Engineering Representative. 6. Selection Criteria the Criteria Utilized For The Service Contract Is The Selected Company S Ability To Obtain Parts And To Appropriately Replace Damaged Or Malfunctioning Equipment. The Technical Support And/or Field Service Representative Shall Have Completed Specialized Knowledge And Training That Was Provided By The Original Equipment Manufacturer (oem), In Providing Technical Support And Repair Of Existing Equipment, All Aspects Of Troubleshooting And Repair To Best Provide The Upgrades And Repairs For The Existing Equipment. a) The Contractor Shall Have Access To Access To Diagnostic Software And Original Equipment Repair Parts. b) The Contractor Shall Have Access To The Oem Server As Well As The Va Server, With Access To Be Performed Only With Pre-approval And In Conjunction With Providing Access And Monitoring Of Contractor By Appropriate Va Employees. 7. Deliverables the Contractor Shall Provide Technical Support And Field Service Representatives For Troubleshooting, Preventative Maintenance, And Repairs Of Equipment From Fully Trained Employees On Request. The Contractor Shall Provide All Appropriate Parts As Covered In The Service Agreement. On Completion Of Work, The Contractor Shall Provide Timely Billing Of Items That Buyer Is Responsible Per The Service Agreement. Any Repairs Or Upgrades That Requires Technical Support Access To The Server Shall Only Be Performed With Pre-approval And In Conjunction With Providing Access And Monitoring Of Contractor By Appropriate Va Employees. 8. Service scheduled Preventive Maintenance Work Shall Be Required In The Performance Of This Contract And Shall Be Performed During The Hospital S Normal Business Hours Of 8:00 A.m. And 4:30 P.m., Local Time (cst), Excluding Federal Holidays, To Include Any Other Day Specifically Declared By The President Of The United States To Be A Federal Holiday. The Contractor Shall Notify The Contracting Officers Representative (cor) At Least 7 Calendar Days Prior To The Normal Testing/inspection Cycle Visit And 8 Hours Prior To Any Emergency Activities. The Jesse Brown Vamc May Consider Allowing Work Outside Of The Above-listed Hours Of Operation At The Convenience Of The Government. Federal Holidays Observed By The Jesse Brown Vamc(s) Are: new Years Day Labor Day Martin Luther King, Jr. Birthday Columbus Day washington S Birthday Inauguration juneteenth National Independence Day Labor Day independence Day Veterans Day memorial Day Thanksgiving Day christmas Day Columbus Day when One Of The Above Designated Federal Holidays Falls On A Sunday, The Following Monday Shall Be Observed As A Federal Holiday. When A Federal Holiday Falls On A Saturday, The Preceding Friday Shall Be Observed As A Federal Holiday By United States Government Agencies. If Different Times Shall Be Needed, This Shall Be Discussed And Mutually Agreed Upon With The Cor And Shall Still Be Considered Normal Business Hours. If Work Must Be Performed Outside Of Mutually Agreed Normal Business Hours ( Over-time Work), The Contractor Shall Obtain Prior Approval At Least 24 Hours From The Cor. If Such Work Shall Be At The Cost Of The Jesse Brown Vamc, A Separate Purchase Order Number Must Be Obtained By The Contractor Prior To Performing Any Over-time Work. Work Shall Be Scheduled In Such As Manner As To Allow As Little Disruption To Patient Services In All Campus Buildings Affected. 9. Security all Contractor Representatives Shall Only Be On Site During The Regular Business Hours Of The Pulmonary Function Lab, Monday Through Friday From 8:00 A.m. To 4:30 P.m. Local Time (illinois) When Management, Pulmonary Technicians Or Bio-medical Department Representatives Are Present And Shall Have Appropriate Identification That Is Easily Visible On Their Person. All Technical Support That Requires Contractor Access To The Equipment Server Shall Always Have Management Of The Lab Or A Representative From Bio-medical Engineering Department To Provide Access And Monitoring Of Work. 10. Reporting Requirements the Check-in Is Mandatory At Medical Center, Pulmonary Function Lab, Room #2254 At 820 S. Damen Avenue, Chicago, Illinois 60612. When The Service Is Completed, The Field Support Technician (fst) Or Technical Support Representatives (tsr) Shall Document Services Rendered On A Legible Equipment Service Report(s) (esr). The Fst Or Tsr Shall Be Required To Sign Out With A Representative From The Pulmonary Function Lab And Submit The Esr(s) To The Cor. All Esr S Shall Be Submitted To The Equipment User For An "acceptance Signature" And To The Cor For An "authorization Signature" Of Approval. jesse Brown Va Medical Center Phone Number: 312-569-8387 va Biomedical Contact Person(s): The Cor Delegation Notice Shall Be Provided At Time Of Award. contractor Contact Personnel Information: The Information Shall Be Produced At Time Of Award. if Your Company Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information:1) Company Name, Address, Email Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Company; 2) Tailored Capability Statements Addressing The Particulars Of The Above Statement Of Work And Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Companies Should Address The Administrative And Management Structure Of Such Arrangements; And 3) Confirmation Your Company Can Meet The Limitations Of Subcontracting Should They Apply (see Below) the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated. based On The Responses To This Synopsis And Other Market Research, This Requirement May Be Set-aside For Veteran-owned Small Businesses (sdvosbs Or Vosbs) (limitation Of Subcontracting Would Apply), Small Businesses (limitations On Subcontracting Would Apply) Or Procured Through Full And Open Competition, Or Procured Through Sole Source Contract. limitations On Subcontracting 13 Cfr §125.6 Will Apply To Any Procurement Set-aside For Veteran-owned Small Businesses (sdvosbs Or Vosbs) Or Small Businesses. 13 Cfr §125.6 States: (a) General. In Order To Be Awarded A Full Or Partial Small Business Set-aside Contract With A Value Greater Than The Simplified Acquisition Threshold (as Defined In The Far At 48 Cfr 2.101) In Paragraph (a) Introductory Text; And An 8(a) Contract, An Sdvo Sbc Contract, A Hubzone Contract, A Wosb Or Edwosb Contract Pursuant To Part 127 Of This Chapter, A Small Business Concern Must Agree That: (1) In The Case Of A Contract For Services (except Construction), It Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Similarly Situated. Any Work That A Similarly Situated Subcontractor Further Subcontracts Will Count Towards The 50% Subcontract Amount That Cannot Be Exceeded. before Any Small Or Large Business Can Be Awarded A Federal Contract, A Contracting Officer (co) Must Affirmatively Determine That The Firm Is Responsible To Perform The Specific Contract It Is Otherwise In Line To Receive. If An Apparent Small Business Successful Offeror Is Denied A Contract Award Because It Lacks Certain Elements Of Responsibility, The Co Will Refer The Matter To The Small Business Administration. Once A Co S Referral Is Received By The Sba S Area Office, The Sba Will Then Inform The Small Business Of The Co S Determination And Offer It The Opportunity To Apply To The Sba For A Certificate Of Competency By A Specific Date. Burden Of Proof Is On The Small Business To Demonstrate That It Meets Specific Coc Eligibility Criteria. after Award, If A Co Or Other Va Officials Determine A Review Of Limitations On Subcontracting Compliance Is Warranted Based Upon Reasonable Information Of Possible Noncompliance, A Request For Review Will Be Submitted To Va S Subcontracting Compliance Review Program. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By 10:00 Am Cst On January 17, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Della.bond@va.gov. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions.
Closing Date17 Jan 2025
Tender AmountRefer Documents 

Environmental Management Bureau Tender

Laboratory Equipment and Services
Corrigendum : Closing Date Modified
Philippines
Details: Description Request For Quotation (rfq) Re-calibration Of Te-5028 Rfq No. Emb-aqms-2024-08-127 1. The Department Of Environment And Natural Resources – Environmental Management Bureau (denr-emb) Hereinafter Referred To As The “purchaser” Now Requests For Submission Of Price Quotations For The Procurement Of The Aforesaid Items Described In The Technical Specifications/scope Of Works/terms Of Reference. No. Description Qty Uom Unit Price Abc 1. Re-calibration Of Te-5028 Calibration Orifice For Tsp And Particulate Matter 10 (pm 10) 1 Pc 95,000.00 95,000.00 2. A Set Of Technical Requirements Are Provided In Attachment/s. Item/s Listed Under The Purchaser’s Terms Of Reference/s Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Quotation. The Approved Budget For This Contract Is Php95,000.00. 3. Bidding Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of Republic Act 9184. 4. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On A Lot Basis Whichever Is Advantageous To The Government. And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. 5. Quotations Must Be Delivered At The Address Below Not Later Than Of 02:00 P.m. Of January 20, 2024. Department Of Environment And Natural Resources Environmental Management Bureau Emb Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 6. Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. 7. Bid/quotation Submission Maybe Typewritten And Must Be Placed In A Sealed Envelope Marked Re-calibration Of Te-5028 Under Rfq No. Emb-aqms-2024-08-127 Sealed Bids Must Be Forwarded To Bac Secretariat (administrative, Financial And Management Division) Located At Emb-afmd, Hrd Building Ground Floor Or May Email To Embquotations@gmail.com Submission Must Be Or On Before The Indicated Date At Time. Late Bids And Proposals Above The Abc Shall Be Automatically Disqualified. 8. Bids/quotations Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. 9. The Delivery Period Shall Be Within Fifteen To Thirty (15-30) Calendar Days From Receipt Of The Purchase Order (po) And/or Job Order (jo). The Supplier Must Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. 10. Delivery Sites: See Delivery Sites Enumerated In The Quotation Form Environmental Management Bureau Hrd Building Ground Floor Denr Compound, Visayas Avenue, Diliman, Quezon City Attention: Afmd-property And General Services Section 11. The Applicable Rate For Late Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. 12. The Purchaser Reserves The Right To Accept Or Reject Any Quotation, And To Annul The Bidding/shopping Process Or Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. 13. Participating Service Provider/s Must Abide By The Existing Health, Safety, Environment, Quality And Other Related Laws And Procedures As Prescribed By The Philippine Government. 14. Documents To Submit The Following: A) Quotation Form With Technical Specifications. B) Mayor’s/business Permit. C) Philgeps Registration Number/proof Of Philgeps Registration D) Tax Clearance Or Annual Income Tax Returns E) Omnibus Sworn Statement-original & Notarized Engr. Rodney V. Diaz Oic-property & General Services Section Attachment 1 Republic Of The Philippines Department Of Environment And Natural Resources Environmental Management Bureau Technical Specifications Item No. 1 Re-calibration Of Te-5028 Quantity: 1 Pc Country Of Origin: Brand/model: All Items Listed Under The Purchasers’ Specifications Must Be Complied On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result To Rejection. Qty Uom Purchaser’s Specifications Bidder’s Specifications 1 Pc Re-calibration Of Te-5028 Calibration Orifice For Tsp And Particulate Matter 10 (pm 10) Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Other Requirements 1. Quotation Submission Requirements - Supplier Must Submit A Duly Accomplished And Signed Price Quotation, And Supplier’s Line By Line Technical Specifications Compliance. - Supplier’s Must Accomplish/fill All Required Pages To Facilitate Documentation - Supplier Must Be Philgeps Registered. - Business Permit/license Permit - Failure To Follow The Above Requirements May Result To Outright Rejection Of Submitted Quotation/s. 2. Evaluation And Awarding Of Quotation - The Purchaser Will Evaluate And Compare The Offers, Which Have Been Determined As Responsive Pursuant To The Completeness Of The Purchaser Requirements - Compliance To The Technical Specifications - Awards Shall Be Made To The Lowest Evaluated And Responsive Quotation. - Submission Of Requirements Containing False Information Or Falsified Documents That Contain False Information Or Concealment Of Such Information In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Procurement Process May Result To Blacklisting Guidelines As Provided In The Irr Of Ra 9184. 3. Terms Of Payment - 100% Of The Contract Price Will Be Paid Upon Verification/inspection And Acceptance Of The Services In Compliance To Existing Government Auditing And Accounting Procedures. Quotation Form Date: ____________________ Attention: Afmd-property And General Services Section Environmental Management Bureau Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: No. Description Delivery Site Quantity Uom Unit Price Total Price Re-calibration Of Te-5028 Calibration Orifice For Tsp And Particulate Matter 10 (pm 10) Environmental Management Bureau, Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1 Pc 2) We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Fifteen To Thirty (15-30) Calendar Day Delivery Period From Receipt Purchase Order (po) Or Job Order (jo). 3) We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. 4) We Understand That Payment For Items Delivered Will Be Made To The Winning Supplier After The Inspection And Acceptance Of Goods Delivered. Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct. 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted. 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____
Closing Date20 Jan 2025
Tender AmountPHP 95 K (USD 1.6 K)

Environmental Management Bureau Tender

Electronics Equipment...+1Electrical and Electronics
Philippines
Details: Description Request For Quotation (rfq) Supply And Delivery Of Smart Inverter Microwave Oven Rfq No. Emb-aqms-2025-01-003 1. The Department Of Environment And Natural Resources – Environmental Management Bureau (denr-emb) Hereinafter Referred To As The “purchaser” Now Requests For Submission Of Price Quotations For The Procurement Of The Aforesaid Items Described In The Technical Specifications/scope Of Works/terms Of Reference. No. Description Qty Uom Unit Price Abc 1. Smart Inverter Microwave Oven Smart Inverter Neo Chef 25l Capacity One Body Dial Combi (mw+gill) Function Easy Clean Coating (antibacterial) Stable Turntable 1 Unit 11,595.00 11,595.00 2. A Set Of Technical Requirements Are Provided In Attachment/s. Item/s Listed Under The Purchaser’s Terms Of Reference/s Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Quotation. The Approved Budget For This Contract Is Php11,595.00. 3. Bidding Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of Republic Act 9184. 4. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On A Lot Basis. And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. 5. Quotations Must Be Delivered At The Address Below Not Later Than Of 02:00 P.m. Of January 20, 2025. Department Of Environment And Natural Resources Environmental Management Bureau Emb Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 6. Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. 7. Bid/quotation Submission Maybe Typewritten And Must Be Placed In A Sealed Envelope Marked Supply And Delivery Of Smart Inverter Microwave Oven Under Rfq No. Emb-aqms-2025-01-003 Sealed Bids Must Be Forwarded To Bac Secretariat (administrative, Financial And Management Division) Located At Emb-afmd, Hrd Building Ground Floor Or May Email To Embquotations@gmail.com Submission Must Be Or On Before The Indicated Date At Time. Late Bids And Proposals Above The Abc Shall Be Automatically Disqualified. 8. Bids/quotations Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. 9. The Delivery Period Shall Be Within Fifteen To Thirty (15-30) Calendar Days From Receipt Of The Purchase Order (po) And/or Job Order (jo). The Supplier Must Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. 10. Delivery Sites: See Delivery Sites Enumerated In The Quotation Form Environmental Management Bureau Hrd Building Ground Floor Denr Compound, Visayas Avenue, Diliman, Quezon City Attention: Afmd-property And General Services Section 11. The Applicable Rate For Late Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. 12. The Purchaser Reserves The Right To Accept Or Reject Any Quotation, And To Annul The Bidding/shopping Process Or Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. 13. Participating Service Provider/s Must Abide By The Existing Health, Safety, Environment, Quality And Other Related Laws And Procedures As Prescribed By The Philippine Government. 14. Documents To Submit The Following: A) Quotation Form With Technical Specifications. B) Mayor’s/business Permit. C) Philgeps Registration Number/proof Of Philgeps Registration Engr. Rodney V. Diaz Oic-property & General Services Section Attachment 1 Republic Of The Philippines Department Of Environment And Natural Resources Environmental Management Bureau Technical Specifications Item No. 1 Supply And Delivery Of Microwave Oven Quantity: Unit Country Of Origin: Brand/model: All Items Listed Under The Purchasers’ Specifications Must Be Complied On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result To Rejection. Qty Uom Purchaser’s Specifications Bidder’s Specifications 1 Unit Smart Inverter Microwave Oven Smart Inverter Neo Chef 25l Capacity One Body Dial Combi (mw+gill) Function Easy Clean Coating (antibacterial) Stable Turntable Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Other Requirements 1. Quotation Submission Requirements - Supplier Must Submit A Duly Accomplished And Signed Price Quotation, And Supplier’s Line By Line Technical Specifications Compliance. - Supplier’s Must Accomplish/fill All Required Pages To Facilitate Documentation - Supplier Must Be Philgeps Registered. - Business Permit/license Permit - Failure To Follow The Above Requirements May Result To Outright Rejection Of Submitted Quotation/s. 2. Evaluation And Awarding Of Quotation - The Purchaser Will Evaluate And Compare The Offers, Which Have Been Determined As Responsive Pursuant To The Completeness Of The Purchaser Requirements - Compliance To The Technical Specifications - Awards Shall Be Made To The Lowest Evaluated And Responsive Quotation. - Submission Of Requirements Containing False Information Or Falsified Documents That Contain False Information Or Concealment Of Such Information In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Procurement Process May Result To Blacklisting Guidelines As Provided In The Irr Of Ra 9184. 3. Terms Of Payment - 100% Of The Contract Price Will Be Paid Upon Verification/inspection And Acceptance Of The Services In Compliance To Existing Government Auditing And Accounting Procedures. Quotation Form Date: ____________________ Attention: Afmd-property And General Services Section Environmental Management Bureau Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: No. Description Delivery Site Quantity Uom Unit Price Total Price Smart Inverter Microwave Oven Smart Inverter Neo Chef 25l Capacity One Body Dial Combi (mw+gill) Function Easy Clean Coating (antibacterial) Stable Turntable Environmental Management Bureau, Hrd Building Ground Floor, Afmd Denr Compound, Visayas Avenue, Diliman, Quezon City 1 Unit 2) We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Fifteen To Thirty (15-30) Calendar Day Delivery Period From Receipt Purchase Order (po) Or Job Order (jo). 3) We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. 4) We Understand That Payment For Items Delivered Will Be Made To The Winning Supplier After The Inspection And Acceptance Of Goods Delivered. Name Of Company : _________________________________ Postal Address : _________________________________ Email Address : _________________________________ Telephone & Fax No. : _________________________________ Signature Over Printed Name : _________________________________ Designation : _________________________________ Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct. 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted. 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree. [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____
Closing Date20 Jan 2025
Tender AmountPHP 11.5 K (USD 198)
8821-8830 of 9229 archived Tenders