Ppe Tenders

Details: I. Description the American Embassy In Conakry, Guinea Requires Preventive Maintenance Services For Chancery Switchgears, Demarc Mv Switch, Pme Pad Mounted Gear Switch And High Voltage Transformers At Chancery. These Services Shall Result In All Systems Being Serviced Under This Contract Being In Good Operational Condition When Reactivated. ii. Performance Work Statement this Is A Firm Fixed Price Contract Payable Entirely In Us Dollars (usd). Prices For All Contract Line-item Numbers (clin) Shall Include Proper Disposal Of Toxic Substances As Per Item 8.4 Where Applicable. No Additional Sums Will Be Payable For Any Escalation In The Cost Of Materials, Equipment Or Labor, Or Because Of The Contractor's Failure To Properly Estimate Or Accurately Predict The Cost Or Difficulty Of Achieving The Results Required. The Contract Price Will Not Be Adjusted Due To Fluctuations In Currency Exchange Rates. the Contract Will Be For A Period Of One-year, With A Maximum Of Three, One-year Options; And Will Be Expected To Commence From The Date Of Notice To Proceed. iii. Pricing the Rates Below Include All Costs Associated With Providing Preventive Maintenance Services In Accordance With The Attached Scope Of Work, And The Manufacturer’s Warranty Including Materials, Labor, Insurance (see Far 52.228-4 And 52.228-5), Overhead, Profit And Gst (if Applicable). iv. Value Added Tax value Added Tax. Value Added Tax (vat) Is Not Applicable To This Contract And Shall Not Be Included In The Clin Rates Or Invoices Because The U.s. Embassy Has A Tax Exemption Certificate From The Host Government. 1. Base Year. The Contractor Shall Provide The Services Shown Below For The Base Period Of The Contract And Continuing For A Period Of 12 Months. clin description quantity Of Equipment type Of Services no. Of Service unit Price / Service ($) total Per Year ($) 101 switch Medium Voltage Demarc, 20kv Sm6 1 semi-annual 2 102 switch Medium Voltage Isolation, 20kv Pme-5 1 semi-annual 2 103 transformer 20kv/400 V – 2500 Kva (chancery) 1 semi-annual 2 104 nec Switchgears 1 annual 1 105 switchboard 1 annual 1 106 switchboard 1 annual 1 107 switchboard 1 annual 1 107 defense Base Act (dba) 1 annual 1 total Base Year 2. Option Year 1. The Contractor Shall Provide The Services Shown Below For Option Year 1 Of The Contract And Continuing For A Period Of 12 Months. clin description quantity Of Equipment type Of Services no. Of Service unit Price / Service ($) total Per Year ($) 101 switch Medium Voltage Demarc, 20kv Sm6 1 semi-annual 2 102 switch Medium Voltage Isolation, 20kv Pme-5 1 semi-annual 2 103 transformer 20kv/400 V – 2500 Kva (chancery) 1 semi-annual 2 104 nec Switchgears 1 annual 1 105 switchboard 1 annual 1 106 switchboard 1 annual 1 107 switchboard 1 annual 1 107 defense Base Act (dba) 1 annual 1 total Base Year 3. Option Year 2. The Contractor Shall Provide The Services Shown Below For Option Year 2 Of The Contract And Continuing For A Period Of 12 Months. clin description quantity Of Equipment type Of Services no. Of Service unit Price / Service ($) total Per Year ($) 101 switch Medium Voltage Demarc, 20kv Sm6 1 semi-annual 2 102 switch Medium Voltage Isolation, 20kv Pme-5 1 semi-annual 2 103 transformer 20kv/400 V – 2500 Kva (chancery) 1 semi-annual 2 104 nec Switchgears 1 annual 1 105 switchboard 1 annual 1 106 switchboard 1 Annual 1 107 switchboard 1 annual 1 107 defense Base Act (dba) 1 annual 1 total Base Year 4. Total For All Years: Base Year $__________ Option Year 1 $__________ Option Year 2 $__________ Total $__________ 5. Repair Option. Repairs Are Not Included Under This Agreement (see 7.1.3) And Are To Be Done Outside This Contract. However, We Would Like To Have Current Labor Rates In The Event That There Is An Issue Discovered During The Preventive Maintenance Of The Specified Equipment. Please Provide Your Current Labor Rates In The Repair Option Fields Below. As Stated In 7.1.3 Any Necessary Repairs Or Parts Will Be Submitted For Approval And Then Billed Against A Separate Po. The Contractor Is Not Approved To Do Any Additional Work Without Approval. repair Labor Rates Base Year $__________/hr Option Year 1 $__________/hr Option Year 2 $__________/hr 6. Notice To Proceed after Contract Award And Submission Of Acceptable Insurance Certificates And Copies Of All Applicable Licenses And Permits, The Contracting Officer Will Issue A Notice To Proceed. The Notice To Proceed Will Establish A Date (a Minimum Of Ten (10) Days From Date Of Contract Award Unless The Contractor Agrees To An Earlier Date) On Which Performance Shall Start. description/specification/work Statement 1.0 Equipment And Performance Requirements 1.1. The American Embassy In Conakry, Guinea Requires The Contractor To Maintain The Following Systems In A Safe, Reliable, And Efficient Operating Condition. Please See Equipment List For A More Detailed Description. nec Switchgears Square D Qed (3) switch Board Qed 4000 A (2) switch Board Qed 200 A (1) switch Board Qed 1200 A (1) transformer 20kv/400v – 2500 Kva (cooper Power System) demarc Mv Switch, 20kv, Sm6-cm 400a, 50hz, Iec 62271-200, Merlin Gerin mv Switch, 20kv Back Of Gen Room, S&c Pme Pad-mounted Gear Switch 1.2. The Contractor Shall Provide All Necessary Managerial, Administrative And Direct Labor Personnel, As Well As All Transportation, Equipment, Tools, Supplies And Materials Required To Perform Inspection, Maintenance, And Component Replacement As Required To Maintain The Systems In Accordance With This Work Statement. Under This Contract The Contractor Shall Provide: the Services Of Trained And Qualified Technicians To Inspect, Adjust, And Perform Scheduled Preventive Maintenance; And Provide Consumable Materials. 1.3. Performance Standards the Generators Shall Always Be Ready To Provide Emergency Power During Normal Working Hours In The Event Of City Power Failure. The Contractor Shall Schedule All Preventive Maintenance Work With The Site Facility Manager To Avoid Disrupting The Business Operation Of The Embassy. 2.0 Hours Of Performance 2.1. The Contractor Shall Maintain Work Schedules. The Schedules Shall Take Into Consideration The Hours That The Staff Can Effectively Perform Their Services Without Placing A Burden On The Security Personnel Of The Post. The Contractor Shall Deliver Standard Services Between The Hours Of 8:00 Am And 5:00 Pm Monday Through Thursday And 08:00 Am To 12:00 Noon Friday. No Work Shall Be Performed On Us Government And Local Holidays. Scheduled Power Outages To Be Performed Only Saturday. access To Government Buildings And Standards Of Conduct 3.1 General. The Contractor Shall Designate A Representative Who Shall Supervise The Contractor’s Technicians And Be The Contractor’s Liaison With The American Embassy. The Contractor’s Employees Shall Be On-site Only For Contractual Duties And Not For Any Other Business Or Purpose. Contractor Employees Shall Have Access To The Equipment And Equipment Areas And Will Be Escorted By Embassy Personnel. 3.2 Personnel Security. The Government Reserves The Right To Deny Access To U.s.-owned And U.s.-operated Facilities To Any Individual. The Contractor Shall Provide The Names, Biographic Data And Police Clearance On All Contractor Personnel Who Shall Be Used On This Contract Prior To Their Utilization. Submission Of Information Shall Be Made Within 5 Days Of Award Of Contract. No Technician Will Be Allowed On Site Without Prior Authorization. Note: This May Include Cleared Personnel If Advance Notice Of Visit Is Not Given At Least One Week Before The Scheduled Visit. 3.2.1 Vehicles. Contractor Vehicles Will Not Be Permitted Inside The Embassy Compound Without Prior Approval. If You Need To Have Vehicle Access, Please Submit Your Vehicle Information (make, Model, License Plate #) Along With A Written Justification As To Why Access Is Necessary. This Should Be Submitted To The Contracting Officer Representative (cor) At Least One (1) Day Prior To The Visit. 3.2.2 Government Shall Issue Identity Cards To Contractor Personnel, After They Are Approved. Contractor Personnel Shall Always Display Identity Card(s) On The Uniform While Providing Services Under This Contract. These Identity Cards Are The Property Of The Us Government. The Contractor Is Responsible For Their Return At The End Of The Contract, When An Employee Leaves Contractor Service, Or At The Request Of The Government. The Government Reserves The Right To Deny Access To U.s.-owned And U.s.-operated Facilities To Any Individual. 3.3. Standards Of Conduct 3.3.1 General. The Contractor Shall Maintain Satisfactory Standards Of Employee Competency, Conduct, Cleanliness, Appearance, And Integrity And Shall Be Responsible For Taking Such Disciplinary Action With Respect To Employees As May Be Necessary. Each Contractor Employee Shall Adhere To Standards Of Conduct That Reflect Credit On Themselves, Their Employer, And The United States Government. The Government Reserves The Right To Direct The Contractor To Remove An Employee From The Worksite For Failure To Comply With The Standards Of Conduct. The Contractor Shall Immediately Replace Such An Employee To Maintain Continuity Of Services At No Additional Cost To The Government. 3.3.2 Uniforms And Personal Equipment. The Contractor's Employees Shall Wear Clean, Neat And Complete Uniforms When On Duty. All Employees Shall Wear Uniforms Approved By The Contracting Officer's Representative (cor). The Contractor Shall Provide, To Each Employee And Supervisor, Uniforms And Personal Equipment. The Contractor Shall Be Responsible For The Cost Of Purchasing, Cleaning, Pressing, And Repair Of The Uniforms. 3.3.3 Neglect Of Duties. Neglect Of Duties Shall Not Be Condoned. This Includes Sleeping While On Duty, Unreasonable Delays, Or Failures To Carry Out Assigned Tasks, Conducting Personal Affairs During Duty Hours And Refusing To Render Assistance Or Cooperate In Upholding The Integrity Of The Worksite Security. 3.3.4 Disorderly Conduct. The Contractor Shall Not Condone Disorderly Conduct, Use Of Abusive Or Offensive Language, Quarreling, And Intimidation By Words, Actions, Or Fighting. Also Included Is Participation In Disruptive Activities That Interfere With Normal And Efficient Government Operations. 3.3.5 Intoxicants And Narcotics. The Contractor Shall Not Allow Its Employees While On Duty To Possess, Sell, Consume, Or Be Under The Influence Of Intoxicants, Drugs Or Substances Which Produce Similar Effects. 3.3.6 Criminal Actions. Contractor Employees May Be Subject To Criminal Actions As Allowed By Law In Certain Circumstances. These Circumstances Include But Are Not Limited To The Following Actions: Falsification Or Unlawful Concealment, Removal, Mutilation, Or Destruction Of Any Official Documents Or Records Or Concealment Of Material Facts By Willful Omission From Official Documents Or Records; Unauthorized Use Of Government Property, Theft, Vandalism, Or Immoral Conduct; Unethical Or Improper Use Of Official Authority Or Credentials; Security Violations; Organizing Or Participating In Gambling In Any Form; And Misuse Of Weapons. 3.3.7 Key Control. The Contractor Will Not Be Issued Any Keys. The Keys Will Be Checked Out From Post 1 By A “cleared American” Escort On The Day Of Service Requirements. 3.3.8 Notice To The Government Of Labor Disputes. The Contractor Shall Inform The Cor Of Any Actual Or Potential Labor Dispute That Is Delaying Or Threatening To Delay The Timely Performance Of This Contract. 4.0 Scheduled Preventive Maintenance 4.1. General 4.1.1. The Contractor Shall Perform Preventive Maintenance As Outlined In Statement Of Work. The Objective Of Scheduled Preventive Maintenance Is To Prevent System Malfunction, Breakdown And Deterioration When Units Are Activated/running. 4.1.2. The Contractor Shall Inventory, Supply And Replace Expendable Parts (filters, Fuses, Indicators, Gaskets) That Have Become Worn Down Due To Wear And Tear. The Contractor Shall Maintain A Supply Of Expendable And Common Parts On Site So That These Are Readily Available For Normal Maintenance To Include: Fuses, Indicators, Oil, Chemicals, Coolant, Filters (air, Oil), Grease, Sealant, Thermostat; In Addition To The Appropriate Tools, Testing Equipment, Safety Shoes And Apparel For Technicians, Personal Protective Equipment (hands, Hearing, Eye Protection), Sds, Cleaning Material And Oil Spill Containment Kits. The Contractor Should Inventory The Supply After Each Visit And Order Replacement Supplies And Have Them Delivered On Site. 4.1.3. Exclusion. This Contract Does Not Include Repair Of Equipment And Replacement Of Hardware. Hardware Replacements Will Be Separately Priced Out By The Contractor For The Government’s Approval And Acceptance. The Government Has The Option To Accept Or Reject The Contractor’s Quote For Parts And Reserves The Right To Obtain Similar Spare Parts From Other Competitive Sources. If Required By The Government, The Contractor Shall Utilize Government-purchased Spare Parts, If Awarded The Work. Such Repairs/replacements Will Be Accomplished By A Separate Purchase Order. However, This Exclusion Does Not Apply If The Repair Is To Correct Damage Caused By Contractor Negligence. 4.1.4. Replacement/repair Of Any Electronic Or Electrical Parts Must Be Approved By The Cor Prior To Installation Of The Part. If The Contractor Proceeds To Replace Any Electronic Or Electrical Parts Without Cor Approval, The Contractor Shall De-install The Parts At No Cost To The Government. 4.2 Checklist Approval the Contractor Shall Submit To The Cor A Schedule And Description Of Preventive Maintenance Tasks Which The Contractor Plans To Provide. The Contractor Shall Prepare This Schedule And Task Description In A Checklist Format For The Cor’s Approval Prior To Contract Work Commencement. 4.2.1. The Contractor Shall Provide Trained Technicians To Perform The Service At Frequencies Stated In Exhibit A And On The Equipment Called Out In This Sow. The Technician Shall Sign Off On Every Item Of The Checklist And Leave A Copy Of This Signed Checklist With The Cor Or The Cor's Designate After The Maintenance Visit. 4.2.2. It Is The Responsibility Of The Contractor To Perform All Manufacturers Recommended Preventive Maintenance As Well As Preventive Maintenance Recommended By The Manufacture Technical Manuals For The Respective Equipment. 5.0 Personnel, Tools, Consumable Materials And Supplies the Contractor Shall Provide Trained Technicians With The Appropriate Tools And Testing Equipment For Scheduled Maintenance, Safety Inspection, And Safety Testing As Required By This Contract. The Contractor Shall Provide All Of The Necessary Materials And Supplies To Maintain, Service, Inspect And Test All The Systems To Be Maintained. 5.1 Contractor Furnished Materials Will Include But Not Limited To Appropriate Tools, Testing Equipment, Safety Shoes And Apparel For Technicians, Hands, Hearing And Eye Protection, Sds, Cleaning Material And Oil Spill Containment Kit. Expendable/consumable Items (e.g. Fuses, Oil, Chemicals, Filters (air, Oil), Generator Starting Batteries, Grease, Sealant, Thermostat), Will Be Maintained In The Onsite Inventory. See 4.1.2. 5.2 Repairs. Repairs Are Not Included In This Contract. See Item 4.1.3. Exclusions. 5.3 Disposal Of Used Oil, And Other Toxic Substances. The Contractor Is Responsible For Proper Disposal Of Toxic/hazardous Substances. All Material Shall Be Disposed Of According To Government And Local Law. After Proper Disposal The Contractor Must Show Proof Of Authorized Disposal Of These Toxic/hazardous Substances. 5.4 Chemical Analysis: The Contractor Is Responsible For Conducting Laboratory Analysis For Coolant And Oil Samples. All Charges For Such Analysis Are Payable By The Contractor And A Report Stating The Test Results Shall Be Submitted To The Cor. 6.0. Load Test: The Contractor Is Responsible For Conducting An Engine Load Test Using An Appropriately Sized Load Prior To Each Annual Transformer Oil Change. 7.0. Deliverables the Following Items Shall Be Delivered Under This Contract: description qty delivery Date deliver To names, Biographic Data, Police Clearance On Contractor Personnel 1 5 Days After Contract Award cor certificate Of Insurance 1 10 Days After Contract Award co certification Of Disposal Of Toxic Chemicals By Local Authorities 1 after Each Change co checklist Signed By Contractor’s Employee 1 after Completion Of Each Maintenance Service cor laboratory Report For Chemical And Oil Analysis 2 7 Days After Completion Of Each 2-year Service cor load Test Report 2 after Completion Of Each 2-year Service cor invoice 2 after Completion Of Each Maintenance Service cor 8.0 Insurance Requirements 8.1 Personal Injury, Property Loss Or Damage (liability). The Contractor Assumes Absolute Responsibility And Liability For All Personal Injuries Or Death And Property Damage Or Losses Suffered Due To Negligence Of The Contractor’s Personnel In The Performance Of This Contract. the Contractor’s Assumption Of Absolute Liability Is Independent Of Any Insurance Policies. 8.2 Insurance. The Contractor, At Its Own Expense, Shall Provide And Maintain During The Entire Period Of Performance Of This Contract, Whatever Insurance Is Legally Necessary. The Contractor Shall Carry The Following Minimum Insurance: workers’ Compensation And Employer’s Liability 8.3 Worker's Compensation Insurance. The Contractor Agrees To Provide All Employees With Worker's Compensation Benefits As Required Under Local Laws (see Far 52.228-4 “worker’s Compensation And War-hazard Insurance Overseas”). 9.0 Local Law Registration if The Local Law Or Decree Requires That One Or Both Parties To The Contract Register The Contract With The Designated Authorities To Ensure Compliance With This Law Or Decree, The Entire Burden Of This Registration Shall Rest Upon The Contractor. Any Local Or Other Taxes Which May Be Assessed Against The Contract Shall Be Payable By The Contractor Without Government Reimbursement. 10.0 Quality Assurance Plan (qap). 10.1 Plan. This Plan Is Designed To Provide An Effective Surveillance Method To Promote Effective Contractor Performance. The Qap Provides A Method For The Contracting Officer's Representative (cor) To Monitor Contractor Performance, Advise The Contractor Of Unsatisfactory Performance, And Notify The Contracting Officer Of Continued Unsatisfactory Performance. The Contractor, Not The Government, Is Responsible For Management And Quality Control To Meet The Terms Of The Contract. The Role Of The Government Is To Conduct Quality Assurance To Ensure That Contract Standards Are Achieved. performance Objective pws Para performance Threshold services. performs All Services Set Forth In The Performance Work Statement (pws) 1 Thru 9 all Required Services Are Performed And No More Than One (1) Customer Complaint Is Received Per Month 10.2 Surveillance. The Cor Will Receive And Document All Complaints From Government Personnel Regarding The Services Provided. If Appropriate, The Cor Will Send The Complaints To The Contractor For Corrective Action. 10.3 Standard. The Performance Standard Is That The Government Receives No More Than One (1) Customer Complaint Per Month. The Cor Shall Notify The Contracting Officer Of The Complaints So That The Contracting Officer May Take Appropriate Action To Enforce The Inspection Clause (far 52.212-4, Contract Terms And Conditions-commercial Items), If Any Of The Services Exceed The Standard. 10.4. Procedures. 10.4.1 If Any Government Personnel Observe Unacceptable Services, Either Incomplete Work Or Required Services Not Being Performed, They Should Immediately Contact The Cor. 10.4.2 The Cor Will Complete Appropriate Documentation To Record The Complaint. 10.4.3 If The Cor Determines The Complaint Is Invalid, The Cor Will Advise The Complainant. The Cor Will Retain The Annotated Copy Of The Written Complaint For His/her Files. 10.4.4 If The Cor Determines The Complaint Is Valid, The Cor Will Inform The Contractor And Give The Contractor Additional Time To Correct The Defect, If Additional Time Is Available. The Cor Shall Determine How Much Time Is Reasonable. 10.4.5 The Cor Shall, As A Minimum, Orally Notify The Contractor Of Any Valid Complaints. 10.4.6 If The Contractor Disagrees With The Complaint After Investigation Of The Site And Challenges The Validity Of The Complaint, The Contractor Will Notify The Cor. The Cor Will Review The Matter To Determine The Validity Of The Complaint. 10.4.7 The Cor Will Consider Complaints As Resolved Unless Notified Otherwise By The Complainant. 10.4.8. Repeat Customer Complaints Are Not Permitted For Any Services. If A Repeat Customer complaint Is Received For The Same Deficiency During The Service Period, The Cor Will contact The Contracting Officer For Appropriate Action Under The Inspection Clause. 11. Transition Plan/contacts within 15 Days After Contract Award, The Contracting Officer May Ask The Contractor To Develop A Plan For Preparing The Contractor To Assume All Responsibilities For Preventive Maintenance Services. The Plan Shall Establish The Projected Period For Completion Of All Clearances Of Contractor Personnel, And The Projected Start Date For Performance Of All Services Required Under This Contract. The Plan Shall Assign Priority To The Selection Of All Supervisors To Be Used Under The Contract. 11.1 On Site Contact. The Following Are The Designated Contact Personnel Between The Us Embassy And The Contractor facility Manager: christopher D Law contracting Officer Representative christopher D Law technical Specialist: mamadou Alimou Barry 12. Submission Of Invoices the Contractor Shall Submit An Invoice After Each Preventive Maintenance Service Has Been Performed. Invoices Must Be Accompanied By A Signed Copy Of The Maintenance Checklist For The Work Performed Including Parts Replacement And Break Down Calls, If Any. No Invoice For Preventive Maintenance Services Will Be Considered For Payment Unless Accompanied By The Relevant Documentation. 13. Personnel Health Requirements all Employees Shall Be In Good General Health Without Physical Disabilities That Would Interfere With Acceptable Performance Of Their Duties. All Employees Shall Be Free From Communicable Diseases. 14. Ordering Official the Designated Ordering Individual Under Far 52.216-18 Is The Contracting Officer. 15. Security Clearances 15.1 Work Within The Caa (and Other Areas As Designated By The Rso) Must Be Performed By Cleared American Workers Having Top Secret Security Clearances. 16. Task Orders the Contracting Officer Will Issue Task Orders To The Contractor To Perform Any Work Under This Contract. If A Task Is Given Orally, It Will Be Followed Up By A Written Task Order Within Two (2) Days Of The Oral Order. All Task Orders Will Be In Written Form, State The Manner Of The Work To Be Performed, And Have An Issue Date And A Date By Which The Work Is To Be Completed. 17. Project Management And Supervision in View Of The Importance Of This Project, The Contractor Shall Assign A Specific Project Manager Who Will Be The Direct Liaison With The Cor Concerning All Work Related To This Contract. It Will Be The Project Manager’s Task To Direct, Schedule, Supervise, Inspect And Test The Work Under This Contract, And To Receive Instructions From The Cor. The Contractor’s Project Manager Shall Be Able To Speak And Understand The English Language At Level 2. Level 2 Is Defined As Being Able To Verbally Satisfy Routine Demands And Limited Work Requirements And Being Able To Comprehend Simple Written Material On Subjects Within A Familiar Context. quality Control Shall Be The Responsibility Of The Contractor. The Contractor Shall Perform Inspection Visits To The Work Site On A Regular Basis. These Visits Shall Be Coordinated With The Cor But Shall Be Surprise Inspections To Those Working On The Contract. 18. Definitions “american Embassy” And “embassy” Mean The Diplomatic Or Consular Mission Of The United States Of America For Which Services Are Provided Under This Contract. “department” Means The Department Of State, Including All Of Its Activities Wherever Located. “government” Means The Government Of The United States Of America Unless Specifically Stated Otherwise. 19. Inspection By Government the Services And The Supplies Furnished Will Be Inspected From Time To Time By The Cor, Or His/her Authorized Representatives, To Determine That All Work Is Being Performed In A Satisfactory Manner, And That All Supplies Are Of Acceptable Quality And Standards. the Contractor Shall Be Responsible For Any Countermeasures Or Corrective Action, Within The Scope Of This Contract, Which May Be Required By The Contracting Officer As A Result Of Such Inspection. 20. Subcontracting the Contractor Shall Not Subcontract Any Work To Be Performed Without The Express Consent Of The Contracting Officer. 21. Security general. The Government Reserves The Right To Deny Access To U.s.-owned And U.s.-operated Facilities To Any Individual. The Government Will Run Background Checks On All Proposed Contractor Employees. The Contractor Shall Provide The Names, Biographic Data And Police Clearance On All Contractor Personnel Who Shall Work On This Contract. identity Cards. The Government Shall Issue Identity Cards To Contractor Personnel, After They Are Approved. Contractor Personnel Shall Display Identify Card(s) On The Uniform At All Times While Providing Services Under This Contract. These Identity Cards Are The Property Of The Government. The Contractor Is Responsible For Their Return At The End Of The Contract, When An Employee Leaves Contractor Service, Or At The Request Of The Government. 22. Ordering Official the Designated Ordering Individual Under Far 52.216-18 Is The Contracting Officer. exhibit A - Statement Of Work switchgear i. General Information: the United States Embassy Conakry, Guinea Requires Professional Services And Contractor Cost Proposals To Perform Preventive Maintenance Services Of The Facility’s Electrical Switchgear(s). ii. Project Requirements: the Contractor Shall Perform Preventive Maintenance As Described In This Statement Of Work. The Objective Of Scheduled Preventive Maintenance Is To Eliminate System Malfunction, Breakdown, And Deterioration When Units Are Activated/running. Description Of Equipment *: *the Attached Equipment List Provides Details Of The Equipment To Be Maintained. nec Switchgears Square D Qed (3) switch Board Qed 4000 A (2) switch Board Qed 200 A (1) switch Board Qed 1200 A (1) transformer 20kv/400v – 2500 Kva (cooper Power System) demarc Mv Switch, 20kv, Sm6-cm 400a, 50hz, Iec 62271-200, Merlin Gerin mv Switch, 20kv Back Of Gen Room, S&c Pme Pad-mounted Gear iii. General Requirements: the Contractor Shall Provide The Labor, Tools, And Materials Required To Perform All Preventive Maintenance As Outlined In This Sow. Embassy Staff Have Service Manuals For Switchgears On-site. The Contractor Shall Confirm Government Provided Manuals Are Complete And Current And Provide The Contracting Officer’s Representative (cor) A Listing Of Any Missing Or Out Of Date Manuals. The Technician Shall Sign Off On Every Task Specified In The Statement Of Work And Will Provide A Typewritten Copy Of Their Report To The Cor Or The Cor's Designate Within Five Business Days Of Each Maintenance Visit. iv. Scope Of Work - - Electrical Switchgear Preventive Maintenance contractor Shall Provide All Materials, Supervision, Labor, Tools And Equipment To Perform Preventive Maintenance. All Personnel Working In The Vicinity Shall Wear And /or Use Appropriate Safety Protection While All Work Is Performed. Any Questions Or Injuries Shall Be Brought To The Attention Of The Post Cor And Occupation Safety And Health Officer (posho) Immediately. Safety Data Sheets (sds) For All Hazmat Shall Be Provided By The Contractor. Copies Shall Be Provided To The Cor For Approval. the Systems And Components To Be Maintained Include Power Conducting Equipment Such As Switches, Circuit Breakers, Fuses And Control Systems Such As Control Panels, Current Transformers And Protective Relays. The Attached Equipment List Provides Details. the Contractor Shall Provide The Cor With A List Of Necessary Parts And Materials. the Contractor Shall Provide Emergency Assistance For Switchgear Support, Priced At An Hourly Rate, Within 24 Hrs Of Being Contacted By The Cor. 3. The Government Will Not Provide Equipment For Switchgear Testing: Circuit Breaker Lifting Truck, Multimeter, Current Leakage Tester, Power Meter, Megger, Vacuum Blower, Wire Stripper, Wrench, Etc. if Any Discrepancies Are Found With The Switchgear(s) That Are Not Covered Under This Scope Of Work, Then The Contractor Shall Provide The Following: detailed Report Noting The Discrepancy Found. bill Of Materials (bom) To Include Component Name, Quantity, Part #, And Price For Any Repair Material Required And Material Lead Time. the Contractor Shall Provide Emergency Assistance For Switchgear Support Within 24 Hours Of Being Contacted By The Cor. price Quote For Repair Labor. at A Minimum, The Following Work Must Be Done: safety & Special Instructions: use Appropriate Personal Protective Equipment (ppe) When Performing Work check All Work Areas, Tools, And Equipment To Ensure Unsafe Conditions Are Eliminated Or Guarded Against. follow Site Safety Procedures. schedule Maintenance With Operating Personnel And Affected Offices (security). follow Approved Lockout/tag Out Procedures. lockout And Disconnect The Main Power Before Tightening The Main Supply Lugs In Order To Avoid The Hazard Of Electrical Shock, Which Could Result In Serious Personal Injury Or Death. review And Follow The Manufacturer’s Instructions. record Results In The Equipment History Log. remove Lockout/tag Out In Accordance With Appropriate Procedures. report All Incidents And Near Miss Incidents To Cor And Assist As Requested In The Investigation And Corrective Action. at A Minimum, The Contractor Shall Comply With The Following: notes: contractor Shall Submit To The Cor For Review, Work Sheet/checklist That Will Be Used For Performing Maintenance Service. a Discrepancy Report Shall Be Submitted To The Cor Immediately Upon Discovery Of Any Condition That Could Result In Equipment Failure. maintenance Procedures: the Purpose Of This Statement Of Work Is To Ensure The Switchgear(s) For This Facility Are Maintained According To Manufacturer’s Recommendations To Ensure The Readiness And Proper Operation Of The System. coordination Of Scheduling Maintenance Shall Begin 90 Days In Advance. annual Schedule: step-one, Visual Inspection: confirm Working Space And Clearance Is Maintained Around All The Electrical Gear Per The National Electrical Code (nec) Requirements. check That The Electrical Room Is Free From Foreign Articles Not Associated With The Room. perform Visual And Mechanical Inspection To Ensure The Proper Operation Of All Factory And Vender Installed Meters, Breakers And Remote Power Monitoring Equipment Associated With The Switch Gear. inspect The Entire Switchgear For Loose Parts Or Connections. Slight Discoloration Or Tarnish Of The Silver Plate Is Normal And Of No Concern. Severe Discoloration Of The Silver Plate Is A Sign Of An Improper Or Loose Contact And Overheating. inspect Physical, Electrical, And Mechanical Condition Including Evidence Of Moisture Or Corona. inspect That All Filters Are In Place, And The Vents Are Clear. clear Loose Dust And Dirt Using An Industrial Vacuum Cleaner Or Lint Free Cloth. Wipe Off The Insulation With A Clean Cloth. check To See That All Anchor Bolts And Other Structural Bolts Are Tight. check For Undue Noise And Vibration. check For Evidence Of Loose Bolted Connections. step-two, Verification: compare The Installed Metering Measurements With Voltage And Power Readings From A True Rms Meter. Make Calibration Corrections As Necessary To Ensure Accurate Voltage And Power Readings. verify The Switchgear Circuit Breakers Sizing Match The Drawings. verify The Proper Labeling Of All The Breakers In The Switchgear. . verify Operation Of Heaters And Thermostats, If Used verify That The Post As-built Drawings (electrical One-line) Match The Switchgear Distribution. Make “red Ink” Corrections On A Paper Copy As Necessary. Inform The Cor And Fm Of Any Discrepancies Or Changes To The Drawings. verify That The Required Nfpa70-e Safety Equipment Is Available And In Good Condition For Local Staff To Use. refer To The Manufacture’s Recommendations For Additional Maintenance Requirements. step-three, Inspect/clean/correct: schedule Power Outage Of Equipment For Cleaning. Coordinate Any Required Outage With The Cor And Fm. perform Proper Lock-out/tag-out And Ensure The System Is De-energized Before Removing Panel Covers And Exposing Any Electrical Bus Or Cabling. Under No Circumstances Should The Equipment Be Energized During The Maintenance Operation. photo Of Equipment Locked And Tagged Out Is Required In Final Report Documentation. inspect Anchorage, Alignment, Grounding For The Equipment. perform Infrared Testing On All Conductor Connections, Buss Terminations. Record Hot Spots On Digital Format For Review. inspect The Bus Bar Connections And Insulating Barrier(s) For Damage. inspect The Cable Load Connectors, Stand­off Insulators, Primary Contact Supports, And All Accessible Cable Terminations For Indications Of Insulation Deterioration. Vacuum Each Compartment And Wipe Off All Insulation. as Applicable Perform Function Tests On Breakers, Test Trip Units And Settings. Replace Any Faulty Batteries, Fuses, Or Switches. clean Each Compartment. Check For Damage, Excessive Wear, Or Corrosion. lubricate The Primary And Ground Contacts And All Moving Joints (shutters, Mechanism-operated Cell (moc), Truck-operated Cell (toc), Etc.) Inspect The Chains/sprocket And The Lifting Rail Of Lift Truck, If Used For Normal Operation. Lubricate Per Manufacturer Recommendations. spot Check And Correct Any Loose Components Or Connections. torque Loose Connections Identified During The Infrared Test Or During Inspection. confirm Correct Operation And Sequencing Of Electrical And Mechanical Interlock Systems. apply Appropriate Dielectric Lubrication On Moving Current-carrying Parts And On Moving And Sliding Surfaces. All Friction Surfaces And Articulation In The Circuit Breaker, Disconnector And Earthing Switch Drives Must Be Lubricated. Refer To Manufacturer’s Recommendations For Approved Lubricants And Points Of Lubrication. correct Any Faulty, Damaged, Discolored, And Worn Components Using Government Provided Spares. exercise All Active Components. inspect Mechanical Indicating Devices For Correct Operation. inspect All Power Control Transformers For Physical Damage, Cracked Insulation, Broken Leads, Tightness Of Connections, Defective Wiring, Proper Overload Protection, And Overall General Wiring. follow The Manufactures Recommendations For Additional Maintenance Requirements. clean Or Replace Any Air Filters Present. make Calibration Corrections As Necessary To Ensure Accurate Voltage And Power Readings On Permanently Installed Switchgear Metering. check All Control Circuits By Tugging On Each Wire To Verify A Snug Fit. insert All The Circuit Breakers To The Test/disconnected Position With Their Secondary Control Power Plugs Engaged And Close The Compartment Doors. Connect The Control Power Source. close The Main Source Of Power And Operate Each Circuit Breaker Electrically In The Test/disconnected Position. operate The Switch Several Times Manually To Verify That It Is Operating Properly. remove Lockout/tag Out In Accordance With Appropriate Procedures. after Re-energizing The Equipment Ensure That All Components Are Up And Functioning Properly. Make The Cor And Fm Aware Of All Components That Are Not Functioning Properly.

Details: For Carrying Out A Study On The Effectiveness Of Cpd Programme For The Primary Education Teachers In Bangladesh. & Terms Of Reference For Institutional Contract       Summary: Unicef Is Planning To Engage A Consulting Firm To Support The Directorate Of Primary Education (dpe) In Conducting An Effectiveness Study On The Continuous Professional Development (cpd) Programme And Training. Dpe Has Been Implementing A Number Of Training Programmes Under Cpd Provisions. As Per The Decision Of The 8th Joint Consultative Meeting (jcm) Of Pedp4, A Study Is To Be Conducted To Understand The Process Of Planning, Designing And Implementing As Well As To Analyse The Appropriateness Of Institutional Arrangements, Quality Assurance Mechanisms And Resources Invested For These Training Programmes. The Agency Will Serve As An Additional Hand To The Unicef Education Team For Effectively And Timely Completing The Assignment. Estimated Duration For The Study Is Ten Months.   Purpose The Purpose Of The Assignment Is To Support The Directorate Of Primary Education (dpe) In Planning, Designing And Carrying Out A Study On The Effectiveness Of Cpd Programme For The Primary Education Teachers In Bangladesh. The Findings Of The Study Are Expected To Inform The Next Sector Programme, Especially To Identify Areas For Further Strengthening The Overall Teacher Development Activities In Primary Education. Location The Assignment Will Be Based In Dhaka, But Field Travel Will Be Required For Data Collection. Estimated Duration Around 10 Months Technical Supervisor Of The Assignment Education Officer, Education Section             Background And Context Teachers, In Sufficient Number And With Required Qualification, Competency And Professional Readiness, Are The Most Crucial Input To Any Education System. If Teachers Are Not Trained, Nurtured And Supported Enough Throughout Their Career, There Will Always Be Capacity Gaps To Meet The Learning Demands Of Children Adequately And Effectively. No Education System Can Perform At The Optimum Expected Level And Ensure Student Learning, If Teachers Remain Weakly Prepared. Therefore, A Coherent And Well-planned Cpd System Should Be In Place That Is Appropriately Resourced And Responsive To The Existing And Emerging Capacity Development Needs Of Teachers, Their Educators And Supervisors. The Fourth Primary Education Development Programme (pedp4) (2018-2025) Is A Comprehensive Initiative Encompassing The Primary Education Sub-sector, Comprising All Essential Developmental Endeavours Within The Sector. Pedp4 Activities Are Categorized Into Three Components And 21 Sub-components. The Pedp4 Puts Emphasize On Developing Teachers’ Professional And Technical Capacity. The Sub-component 1.5 Is On Continuous Professional Development (cpd), Which Aims To “ensure That All Teachers And Teacher Educators Acquire The Requisite Professional Standards Through A Continuous Engagement In Professional Development Activities.” Achieving This Goal Is Possible With A Coherently Articulated System That Makes Professional Development The Norm. In Order To Realize This Vision, A Cpd Framework Was Developed In Year 1 (2018 – 2019) Of Pedp4. The Framework Encompasses All Types Of Teacher Professional Development Interventions With Review Of Current Training Curricula, Delivery Methods, Training Assessment And Monitoring Mechanisms And Implementation Of The Training Knowledge/skills At The Classroom Level. Guided By The Cpd Framework As Well As Based On The Needs, Dpe Provides Following Training Under Cpd Programme In Primary Education Sub-sector: Type Of Cpd Training[1] Target Group Academic Supervision Training Assistant Upazila/thana Education Officer (aueos/ateos) Induction Training For Newly Recruited Teachers Assistant Teachers (teaching At G1-g5) Induction Training For Newly Recruited Ppe Teachers Assistant Teachers For Pre-primary Education Leadership Training Headteachers Ict In Education Training All Teachers Need-based Sub-cluster Training All Teachers Curriculum Dissemination Training All Teachers Competency Based Item Development And Test Administration Training All Teachers Training Of Master Trainer In English (tmte) Selected Teachers/ Aueos/ateos As Master Trainers A 7-day Foreign Training Selected Teachers And Educators Send Training Two Teachers Per School Subject-based Training Core Subjects Bangla Assistant Teachers English Assistant Teachers Math Assistant Teachers Science Assistant Teachers Bangladesh And Global Studies Assistant Teachers Non-core Subjects Physical Education Assistant Teachers Arts And Crafts Assistant Teachers Music Assistant Teachers These Training Programmes Are Expected To Help Teachers To Continuously Develop Their Skills And Professional Capacities In Facilitating Effective Teaching-learning Process In Classroom. Dpe Develops/updates Manuals, Materials And Resource Books For Each The Above-mentioned Training Activity. Different Training Programmes Are Facilitated By Different Educators. Instructors At Primary Teachers’ Training Institutes And Upazila Resource Center (urc) Instructors Have The Main Responsibility Of Delivering These Training. The Need-based Sub-cluster Training Is Usually Conducted By The Assistant Upazila Education Officers. There Is A Yearly Training Calendar Prepared By Dpe With A Plan To Organize Different Types Of Cpd Programmes. The Current Study Has Been Planned To Look Into These Aspects, Especially Understand The Current Situation Of How The Cpd Training Programmes Are Planned And Implemented As Well As To Get An Insight Into The Extent To Which The Teachers Translate Their Learning In The Lesson Delivery In Schools.   Rationale / Purpose Of The Evidence Activity Data From The National Student Assessment (nsa) 2022[2] Indicates That Students Are Struggling To Meet The Expected Learning Levels, With Only About Half Of The Students Achieving Expected Competencies In Bangla And Just A Third In Mathematics In Grades 3 And 5. The Nsa Also Highlights The Significant Impact Of Teachers' Pedagogical Practices On Children's Learning. The Cpd Training Programs Aim To Help Teachers Continuously Enhance Their Skills And Professional Capacities, Thereby Facilitating An Effective Teaching-learning Process In The Classroom And Helping Students Achieve The Expected Learning Outcomes. However, There Is No Recent Studies Conducted To Understand How Effective The Cpd Programme Is In Imparting The Required Skills For Teachers. A Cpd Study Was Done During The First Year Of Pedp4 As A Part Of Developing The Cpd Farmwork.  The Development Of The Cpd Framework Based On The Cpd Study Was A Disbursement Linked Indicator (dli) (dli Target 3.2) Of Pedp4 In Year 1. As A Part Of The Process, All Dlis Are Verified To See Whether All Activities Are Completed As Per The Verification Protocol. The Verification Findings Are Documented In A Result Verification Report (rvr). The Rvr Of The Dli Target 3.2 Reported That The Cpd Study Mainly Looked Into The Current Situation And Cpd Needs. However, As Documented In The Rvr, The Study Had A Number Of Issues In Terms Of Internal Consistency, Relevance And Feasibility. The Rvr Recommended To Undertake A Comprehensive Cpd Effectiveness Study Taking The Global Experiences And Lesson Learnt Into Consideration. In Year 4 Of Pedp4, There Was Another Dli (dli Target 3.3) On The Implementation Of The Cpd Plan. Following The Verification Process, A Joint Consultative Meeting (jcm, 8th) Was Held On 27 March 2023 To Convey The Development Partners’ (dps) Assessment On The Verified Dli Targets. The Jcm Also Emphasized Conducting A Cpd Effectiveness Study, Which Was Agreed As One Of The Priority Actions In The Jcm Record Of Discussion (rod). Moreover, The Pedp4 Is Going To Be Completed In June 2025; And The Ministry Of Primary And Mass Education (mopme) Has Already Started The Discussion On The Next Sector Programme. This Design Of The Next Sector Programme Typically Includes Several Studies To Stocktake Overall Situation And Performance Of The Sector. The Findings Of The Studies Will Inform The Decisions On Different Aspects Of The Sector. The Cpd Effectiveness Study Can Be Considered As One Of The Design Studies That Will Contribute To How Teacher Development Interventions Will Be Strengthened In The Following Programme.   Objectives The Objective Of This Assignment Is To Support Dpe In Carrying Out A Study To Understand The Process Of Planning, Designing And Delivering The Cpd Training Programmes As Well As To Gather Evidence On The Extent To Which Teachers Are Able To Reflect Their Learning In Pedagogical Practices In Classroom. The Specific Objectives Of The Study Are To: Analyse The Relevance And Alignment Of Cpd Manuals And Materials With The National Priorities Around Teacher Development In Bangladesh; Understand The Process And Quality Of Training Delivery, Including The Training Strategies, Quality Assurance Mechanism And Adequacy Of Resources; Explore The Extent To Which The Teachers Are Able To Use Their Cpd Learning In Classroom Teaching Learning Process.   Scope The Agency Will Directly Work With Training Division And Other Respective Line Divisions Of Dpe And Unicef Team Throughout The Study Process. Collaboration With And Guidance From All Dps Will Also Be Critical In Conducting A Technically Sound Study And Producing A Comprehensive Study Report.  The Intension Is Not To Evaluate/assess The Impact Of Each Individual Training Programme Under Cpd, Rather To Analyse And Understand How The Cpd Interventions Are Planned, Designed And Delivered As Well As To See Whether The Cpd Programmes Are Aligned With The National Policies And Priorities And Responsive To The Teachers’ Capacity Needs. The Study Also Aims To Understand What Monitoring, And Quality Assurance Mechanisms Are In Place To Ensure Quality Delivery Of The Cpd Programmes. The Assignment Will Cover Three Main Aspects Of The Cpd Programmes. Following Is The Scope, Description Of Tasks, Expectations And Required Process Under The Assignment.   4.1. Alignment And Relevance Of Cpd Programme Reviewing The Policy Documents, Guidelines And Framework To Identify National Priorities And The Goals Around Teacher Development: Though Bangladesh Is Yet To Formulate A Teacher Policy Or Teacher Development Policy/framework, Different Other Policies, Plan And Documents Outline The Goals Of Teacher Development. The Agency Will Locate, Collect And Review All The Documents That Include Directions And Guidelines For Teacher Development. The Main Objective Of Reviewing The Documents Would Be To Generate National Priorities And Policy Directions For Teacher Development In Bangladesh. Followings Are The Indicative List Of Documents (these Are Not Limited) That Can Be Reviewed: Education Policy 2020 8th Five-year Plan Pedp4 Programme Document – Cpd Sub-component Revised National Curriculum Cpd Framework Result Verification Reports (rvrs) Of All Cpd Dli Targets Annual Sector Performance Report (aspr) Studies On Cpd Programmes In Bangladesh Major Relevant Policy Documents Reviewing The Cpd Curriculum, Manuals And Materials To Understand Their Alignment With National Priorities: The Next Step Would Be Reviewing The Manuals And Materials Of All Current Cpd Programmes Mainly To Do A Mapping Of The Competencies, Contents And Information Covered Wholistically By The Cpd Programmes In Primary Education. The Agency Will Also Identify The Training Strategies And Approaches Outlined The Cpd Manuals, Which Are Suggested To Be Used During Training Delivery. The Agency Will Use This Mapping To Analyse The Followings: I) Alignment Of The Cpd Programmes With National Priorities; Ii) Relevance With National Curriculum; Iii) Responsiveness To The Contemporary National And Global Needs For And Practices Of Teacher Development; Iv) Provisions For Capacity Building Of Supervisors And Educators; V) Adequacy And Completeness Of The Contents For Achieving The Expected Outcomes Of Each Cpd Training Programme; And Vi) Technical Soundness Of The Training Strategies And Approaches.   Mapping The Cpd Packages With Teachers’ Professional Standards (tps): As A Part Of Basic Training For Primary Teachers (btpt) [revised Dped], Dpe Has Developed And Approved The ‘teachers’ Professional Standards (tps)’ For Primary Teachers. The Tps Are A Set Of Competencies That A Primary School Teacher In Bangladesh Is Expected To Have. The Agency Will Conduct A Comparative Analysis Between The Competencies Of The Tps And Expected Outcomes Of Each Cpd Training. This Will Also Include An Analysis On Which Cpd Training Contributes To The Achievement Of Which Competencies Of Tps.   4.2. Quality Of Cpd Training Delivery Observing The Training Sessions: The Agency Will Collect The Annual Training Calendar From The Training Division Of Dpe As Well As Gather Information On Which Training Programmes Will Be Delivered During The Period When The Agency Will Plan For Data Collection. At The Same Time, The Agency Will Develop A Checklist Based On The National And Global Best Practices That Can Be Used During The Session Observation. The Checklist Might Include Indicators On: I) Quality Of Facilitation; Ii) Use Of Materials And Resources; Iii) Use Of Training Approaches And Strategies; Iv) Engagement Of Trainees; And V) Time Management. Analysing The Training Planning And Management Processes: The Agency Will Review And Analyse The Overall Process That Is Followed During The Planning And Management Of Cpd Training Programmes. This Will Include: I) Distribution Of Different Cpd Training Throughout The Year; Ii) Process Of Selection And Deployment Of Trainees; Iii) Frequency Of The Different Cpd Training; And Iv) Distribution Of Participation Of Teachers/trainees In Different Training Programmes. Understanding The Quality Assurance Mechanisms: It Is Also Important To Analyse And Understand The Mechanisms In Place For Ensuring The Quality Of Cpd Training Programmes. The Agency Will Discuss With Trainers, Related Sub-national Officials And Dpe Officials To Gather Information On All Quality Assurance Mechanism They Use During The Training Delivery. The Quality Assurance Mechanism Might Include Session Observation By Respective Officials, Feedback Gathering From The Trainers And Pre-test/post-test. The Agency Will Also Collect The Checklist Or Any Other Documents That Are Used For This Purpose. Understanding The Trainees’ Perception: The Agency Will Analyse And Understand The Perception Of The Trainees Mainly To Have An Insight Into: I) Quality Of The Contents And Delivery; Ii) Effectiveness Of The Cpd Training In Building The Expected Capacity; Iii) Overall Experience Of The Cpd Training; Iv) Additional Need For Capacity Development; And V) Challenges They Face During Participation In The Training Programmes. Analysing The Process And Adequacy Of Resources Allocation And Facilities: This Step Includes Mainly Two Aspects. Firstly, The Agency Will Look Into The Fund Allocation And Disbursement Process For Cpd Training. This Will Also Include Fund Disbursement Channel, Sufficiency Of Funds For Different Training Programmes, Timeliness Of The Fund Disbursement To The Field And Effectiveness Of Fund Utilization. Secondly, It Is Also Important To Analyse Adequacy And Suitability Of The Resources In Venue Where The Cpd Training Typically Takes Place. Most Of The Cpd Training Usually Takes Place Either In Pti Or Urc. For This, The Agency Will Use A Checklist That Identifies Resources And Facilities Necessary In A Training Venue To Ensure Effective Training Delivery.    4.3. Reflection Of Cpd In Classroom Observing The Classroom Lessons: The Agency Will Observe A Selected Number Of Lessons At The Government Primary Schools, Mainly To Understand The Reflections Of Cpd Training In The Teaching Learning Process. For Effectively Observing The Lessons, The Agency Will Develop A Checklist Covering The Important Aspects Of Effective Pedagogical Practices In Classroom. This Might Include, But Not Limited To: I) Lesson Plan; Ii) Use Of Materials; Iii) Engagement Of The Learners; Iv) Use Of Teaching-learning Strategies (e.g. Q/a, Group Work, Pair Work Etc.); V) Assessment. Understanding The Academic Support System: A Review And Analysis Of The Existing Academic Support To The Teachers Will Also Be Conducted. The Agency Will Have Discussions With Teachers, Headteachers And Supervisors To Have A Comprehensive Understanding The Academic Support System, Including: I) Who Are The Supervisors; Ii) Frequencies Of Academic Support Activities (lesson Observation, Supervision And Mentoring); Iii) How Supervisors Record The Findings From Supervision; And Iv) What Are The Strategies/approaches They Follow To Support Teachers. Analysing The Challenges Teachers Face In Applying The Cpd Learnings: The Agency Will Also Gain An Insight Into The Challenges Teachers Face In Applying The Cpd Learnings In Their Lessons, Especially In Terms Of The Availability Of Materials, Learning Environment And Facilities In Classroom, Support Form Headteachers And Colleagues, Workload And So On. It Might Also Include How Teachers’ Participation In Different Training Programmes Affect The Student Contact Hours In School.  In Addition To Above-mentioned Tasks, The Agency Is Expected To Maintain Effective Communication And Coordination With All Involved In The Process. All The Activities Under This Assignment Will Be Accomplished In Collaboration With The Training Division Of Dpe, With Technical Support From Unicef And Other Development Partners. Frequent Communication With Responsible Dpe Officials Will Have To Be Maintained Throughout The Process Of Accomplishing This Assignment. All The Documents And Materials Submitted By The Expert Will Be Reviewed Both By Dpe, Unicef And Other Dps. The Agency Is Expected To Attend Review And Coordination Meetings Related To This Assignment And Make Presentations If And When Required. It Is Also Expected That The Agency Will Prepare Meeting Minutes Within 2 Days After Each Meeting And Share With Dpe And Unicef.   Study Questions As Mentioned, The Study Relates To Three Major Aspects Of Cpd. Followings Are The Specific Questions Under Each Of The Aspects. Firstly, Analysing The Relevance And Alignment Of The Cpd Programmes With National Policies, Priorities, Framework And Standards Pertaining To Teacher Development, Through Following Guiding Questions: A.1. What Are The Available Policy Documents, Framework And Guidelines That Outline The Goals, Priorities And Strategies For Teacher Development In Bangladesh? A.2. How Well Are The Current Cpd Programme Objectives Aligned With And Responsive To The Goals Of Teacher Development And Overall Priorities In The Sector? A.3. To What Extent Are The Current Cpd Programmes Relevant To The Revised Curriculum And Contemporary National And Global Needs For And Practices Of Teacher Development? A.4. How Comprehensive Are The Cpd Programmes In Terms Of Developing Capacity Not Only Of Teachers But Also Of The Educators And Supervisors? A.5. To What Extent Do The Current Cpd Programmes Cover The Contents And Skills Necessary For Achieving The Teachers’ Professional Standards? A.6. To What Extent Are The Contents, Texts And Information Set Out In The Manual And Resource Book Of Each Cpd Training Programme Adequate And Complete For Achieving The Expected Outcomes Of Each Cpd Training Programme? A.7. How Well Are The Training Strategies And Approaches Outlined In The Cpd Manuals Technically Sound And Appropriate?   Secondly, Understanding The Quality Of Training Delivery, Including The Quality Assurance Mechanism, Resources And Perception Of The Trainees, Through Following Guiding Questions: B.1. To What Extent Are The Cpd Training Sessions Useful In Terms Of The Delivery Of The Contents, Use Of Materials And Resources, Use Of Training Approaches And Strategies, Engagement Of Trainees And Time Management? B.2. What Quality Assurance Mechanism (monitoring, Session Observation, Feedback Etc.) Are In Place To Ensure That The Training Sessions Are Of The Expected Quality? B.3. How Do The Trainees Perceive The Usefulness And Relevance Of The Content, Delivery, And Overall Experience Of The Cpd Training? B.4. How Adequate Are The Resources And Facilities Available In The Training Venues (pti, Urc And Others) For Conducting Effective Training Sessions? B.5. What Is The Trainee Selection Mechanism And How Rational Is The Distribution Of Participation Of Trainee In Different Training Programmes? B.6. How Evenly Are The Cpd Trainings Distributed Throughout The Financial Year As Per Dpe’ Yearly Training Calendar? B.7. How Rational And Adequate Is The Current Frequency Of Different Cpd Training? B.8. How Adequate And Enabling Is The Fund Allocation And Disbursement Mechanism In Terms Of The Sufficiency Of Funds For Different Training Programmes, Timeliness Of The Fund Disbursement To The Field And Efficiency Of Fund Utilization?   Thirdly, Exploring The Reflection Of Cpd In Classroom Teaching Learning Process, Including Academic Support System And Enabling Environment At School, Through Following Guiding Questions: C.1. To What Extent Are The Learnings From Different Cpd Programme Contributing To Improved Pedagogical Practices Of Teachers In The Classroom? C.2. How Responsive Is The Academic Support System (lesson Observation, Supervision And Mentoring Etc.) To The Teachers’ Needs For Ensuring Improved Teaching-learning Practices? C.3. How Do The Supervisors Record The Findings From Lesson Observation And School Monitoring And How Are The Findings Communicated/shared With Teachers? C.4. What Challenges Do The Teachers Face In Applying The Cpd Learnings In Their Lessons In Terms Of Facilities Inside The Classroom, Support From Co-workers And Headteachers And Enabling Environment At School? C.5. How Does The Teachers’ Participation In Different Training Programmes Affect The Student Contact Hours In School?   Methodology Based On The Above Descriptions In Section 4 As Well As To Respond To The Guiding Questions Outlined Under Section 5, The Agency Is Expected To Propose Technically Sound Methodology That Will Include: I) Study Approach; Ii) Sampling Method; Iii) Data Collection Methods; Iv) Respondents; V) Data Entry And Analysis Process; Vi) Reporting Approach; And Vii) Quality Assurance Mechanism. The Study Methodology And Other Details Are To Be Included In The Inception Report. The Proposed Methodology Will Be Agreed And Finalized Based On The Discussion With Dpe, Unicef And Other Development Partners. Followings Are The Indicative/suggestive Methodology For This Study: Study Approach: The Study Will Employ A Mixed Method Of Data Collection And Analysis, Combining Both Quantitative And Qualitative Approaches. The Mixed Method Will Allow A Deeper Exploration Of The Issues Around Cpd By Utilizing A Blend Of Qualitative And Quantitative Data. Following Is A Summary Of Proposed Methods For Data Collection, Including The Respondents And Questions To Be Responded Through Each Method.   Proposed Methods Suggested Respondents/ Documents/ Locations Questions To Be Responded Qualitative Desk Review All Documents Listed Under Sub-section 4.1 A.1, A.2, A.3, A.4, A.5, A.6, A.7, B.2, B.5, B.6 And B.8 Kii Central, Division And District Level Officials A.3, A.4, A.5, B.6, B.8 And C.2 Fgd/in-depth Interview Trainers And Educators (pti And Urc) And Upazila Level Supervisors A.3, A.4, A.5, A.6, A.7, B.2, B.4, B.5, B.6, B.7, B.8, C.2, C.3 And C.5 Quantitative Questionnaire/ Opinionnaire School Teachers A.3, B.3, B.7, C.1, C.4 And C.5 Observation Cpd Training Sessions, Classroom Lessons B.1, B.2 And C.1 Resource Adequacy Analysis Pti And Urc And Other Training Venues B.4 The Agency Is Expected To Prepare The Data Collection Tools For Each Method Considering The Data Required For Responding To The Questions. It Is Recommended That The Agency Will Include Drafts Of The Tools In The Inception Report. The Tools Will Be Finalized Based On The Thorough Discussion With Dpe, Unicef And Other Development Partners. Sampling: The Sampling Will Follow A Blend Of Stratified - To Ensure That Respondents Of All Levels Are Included - And Purposive – To Ensure That The Intended Purpose Of Data Collection Is Achieved. The Sample Size Will Not Have To Be Nationally Representative But Adequate To Present The Findings Reliably And Confidently. At The Same Time, It Is Important To Ensure That Respondents/schools Are Selected From All Eight Administrative Divisions. For Observing The Training Sessions, Dpe’s Training Calendar Will Be The Guiding Document. Training Programmes That Would Be Delivered During The Time Of Data Collection Will Be Included In The Sample. The Agency Is Expected To Propose The Appropriate Sampling Method And Number Of Respondents And Lessons To Be Observed. These Will Be Finalised Based On The Discussion With Dpe And Unicef. Risks And Limitations: Following Are The Risks And Limitations Anticipated: The Study Is Not Planned To Be Nationally Representative. Therefore, It Might Be Challenging To Draw The Conclusion From The Findings With Full Confidence. Dpe Has A Yearly Training Calendar For Delivering Training Throughout The Year. Also, Some Training Happens Only Once In 3-4 Year Period. It Means The Study Cannot Observe The Sessions Of All The Training Programmes, It Can Cover The Programmes That Are Conducted During The Time Of Data Collection. The Study Does Not Intend To Assess Or Evaluate The Cpd Training Programmes, Rather It Aims To Analyse, Understand And Document The Current Processes, Mechanisms And Institutional Practices. For This Reason, The Findings Will Not Infer To The Effectiveness Of Each Training.   Ethical Considerations Agency Contracted For The Study Is Expected To Follow The Ethical Principles And Considerations Outlined In The United Nations Evaluation Group (uneg) Ethical Guidelines For Evaluation And The Unicef Procedure For Ethical Standards In Research, Evaluation And Data Collection And Analysis. In Addition, The Uneg Norms And Standards Will Be Observed. As Per Unicef Standards For Ethical Research, The Agency Must Give Special Attention To Ethical Considerations And Should Put In Place Adequate Measures For Ethical Oversight Throughout The Study/evaluation Period. All Researchers And Field Investigators Involved In Primary Data Collection Should Have Undergone Basic Ethics Training, Which At A Minimum Includes Completing Unicef’s Agora Course On Ethics In Evidence Generation Or Its Equivalent. In Conducting The Study, The Agency Must Ensure Informed Consent, Respecting People’s Right To Provide Information In Confidence And Making Study Participants Aware Of The Scope And Limits Of Confidentiality. Furthermore, The Agency Is Responsible For Ensuring That Sensitive Information Cannot Be Traced To Its Source So That The Relevant Individuals Are Protected From Reprisals.  Data Storage And Security Must Be Ensured At All Stages Of The Study. Only Selected Personnel From The Research Agency Should Have Access To De-identified Data, And Only Anonymised Data Should Be Shared Externally, And With Unicef (unless Stated Otherwise).   Use Of Findings As Mentioned, Though Cpd Training Has Been Implemented For Long, There Is No Solid Study Or Evidence That Analyses And Documents The Cpd Planning, Design, Implementation And Institutional Arrangement. One The Other Hand, Mopme Has Started Designing The Next Sector Programme In Primary, And Needless To Say, Teacher Capacity Development Is Envisaged As One Of The Important Components Of The Programme. For These Perspectives, The Findings Of The Study Will Be Used In Following Two Processes: Updating The Cpd Programmes: Based On The Findings, Dpe Will Update, Revise And Further Strengthen The Cpd Training Manuals, Materials, Quality Assurance Mechanisms, Alignment And Relevance Of The Training. Strengthening Cpd Provisions In The Next Sector Programme: The Study Will Also Inform The Critical Decisions About The Cpd Provisions For The Next Sector Programme, Institutional Arrangements, Capacity Building Of Educators And Supervisors, Fund Disbursement And Utilization And Training Management.   Publication Plan The Study Report Will Be Shared With Dpe And All Development Partners In The Sector. Dpe Will Disseminate The Findings Through Workshops, As Well As Circulate The Report By Uploading It Onto Its’ Website. However, At His Point, There Is No Plan To Publish The Report Through Any National Or International Journals.   Schedule Of Deliverables, Timeline And Payment   Sl# Deliverables Timeline (total 8 Months) Payment 01 An Inception Report/work Programme Detailing Methodologies And Data Collection Approaches To Be Used, Implementation Timeline And Approaches For Consultation And Reporting. August 2024 10% Of The Contract Value 02 A Document Review Report (to Be Part Of The Study Report) With A Complete Overview Of National Teacher Development Priorities, Current Cpd Provisions In Bangladesh Including A Mapping Of Cpd With Tps. September 2024 15% Of The Contract Value 03 Finalized Data Collection Tools Including Data Collection Plan, Timeline And Type Of Respondent To Be Engaged. October 2024 20% Of The Contract Value 04 Draft Cpd Effectiveness Study Report, With A Presentation, A Briefing Note (not More Than 5 Pages) Highlighting The Key Findings From The Study For Sharing And Facilitating Reviews With The Stakeholders January 2025 25% Of The Contract Value 05 Final Cpd Effectiveness Study Report That Incorporates Feedback And Suggestions From Dpe, Development Partners And Other Stakeholders. March 2025 30% Of The Contract Value   Team Composition, Qualifications & Experience Required General Requirement Of The Agency:   A National Agency With Minimum Of 10 (ten) Years Of Experience Around Educational Research And/or Teacher Development.  The Agency Should Have Implemented Or Ongoing 3 (three) Contracts Of Similar Nature With Organizations/ Companies Of Similar Magnitude And Complexity. Experience Of Working With Government Counterparts And Understanding Of Government System And Process. Previous Experience Of Working With Education Directorates, And National And Sub-national Education Stakeholders, Especially With Educators, Supervisors And Teachers. Proven Experience Of Planning, Delivering, Managing And Organizing Capacity Development Programmes, Preferably For Teachers. Proven Experience In Quantitative And Qualitative Study And Research. Demonstrated Prior Experience In Preparing Interactive Study Reports With Visualization And Infographics. Strong Analytical Written Skills, Including The Ability To Write In An Engaging And Informative Manner And Clearly Synthesize Information. Previous Collaboration Experience With Unicef Preferred, But Not Mandatory.    Team Composition And Expertise: The Agency Will Assemble A Team With Adequate Experts Who Have All Necessary Skills For Effectively Conducting The Study. It Is Expected That The Team Will Include At Least One International Expert Who Will Bring Global Cpd Perspectives As Well As Ensure The Technical Soundness Of The Study Design And Support In Producing High Quality Study Report. The Key Considerations In Assembling The Team Should Include A Right Balance Of Technical And Operational Skills; Drawing The Right Technical Expertise As Per The Requirements Of The Assignment; Assembling The Most Suitable National Expertise With Deeper Contextual Understanding And Tacit Knowledge Of Ground Realities In Bangladesh And A High Concern For Ensuring Value For Money. The Agency Is Expected To Propose The Adequate Number Of Experts In The Team. However, The Team Should Possess Following Expertise: Team Leader/research Manager: The Team Should Include One Team Leader Or Research Manager Who Will Oversee The Whole Study Process. S/he Should Have Minimum Master’s Degree In Relevant Field And Minimum 15 Years Of Experience In Managing Large-scale Study, Preferably With Experience In Teacher Development In Bangladesh. The Team Leader Can Be National Or International. Qualitative And Quantitative Research Expert(s): The Team Should Have Expert(s) Who Have Proven Track Records In Both Research Paradigms: Qualitative And Quantitative. The Expert(s) Should Have Minimum Master’s In Research, Statistics Or Relevant Field, And Minimum Of 10 Years Of Experience In Education/research. Data Analyst(s): The Team Should Comprise Experts Who Have Deep Technical Knowledge And Understanding Of Data Analysis For Both Qualitative And Quantitative Research Paradigms. The Data Analyst(s) Should Have Minimum Of Masters In Psychometrics, Statistics Or Relevant Field And Minimum 8 Years Of Experience In Data Analysis. Report Writing Expert(s): The Team Should Also Include Experts Who Have Proven Experience Of Writing Interactive Reports With Adequate Technical Details And Visualization. The Report Writing Expert(s) Should Have Minimum Of Masters In Experience In Teacher Development, Education And Research And Minimum 10 Years Of Experience In Educational Study Design And Report Writing, Preferably In The Area Of Teacher Development. The Report Writing Expert(s) Can Be National Or International. Enumerators: The Agency Will Assemble A Team Of Enumerators Who Have Previous Experience Of Data Collection, Especially In The Education Context. The Enumerators Should Have Solid Expertise In Facilitating Discussions, Interviews And Consultations With The Research Respondents. Experience Of Consultation With Government Officials Will Be Expected. The Agency Will Propose Adequate Number Of Enumerators Based On The Sample Size And Scope Of Data Collection.   Duty Station The Agency Will Work Mainly Based In Dhaka, With Frequent Communication With Dpe And Unicef. Data Collection Will Require Travelling To Division And District-level Offices, Training Venues At District And Upazila Level, And Schools. For Meetings, Workshop And Consultation With Government Counterpart, The Designated Agency Officials Will Have To Travel To Mopme And Dpe.   Management And Supervision Dpe: As Mentioned, Unicef Will Be Supporting Dpe In Carrying Out The Study. Therefore, Dpe Will Provide Overall Guidance And Directions To Conduct The Study. All The Documents, Including The Inception Report, Data Collection Tools And Study Report Will Be Endorsed By Dpe. Besides, Dpe Will Support The Agency In Accessing All The Documents, List Of Schools And Training Centres, And Officials For Sampling Purposes. Once Sampled, Dpe Will Also Support In Reaching Out The Respective Officials To Facilitate Data Collection Process. Unicef: Unicef Will Serve As The Technical Lead Of The Study. All Deliverables Will Be Reviewed By Designated Officials Of The Education Section Before Sharing With Dpe. Unicef Will Also Facilitate The Discussions, Correspondences And Consultations Between Dpe And The Agency. Unicef Supply Section Will Remain The Focal Point For All Administrative, Financial And Commercial Queries And Correspondence, Including Contract Amendment.   Technical Evaluation Criteria   Category Points Relevance And Alignment Of The Proposal (05) Understanding Of, And Responsiveness To, Unicef Bangladesh Office Requirements. 02 Understanding Of Scope And Objectives Of The Tor And Completeness Of Response. 02 Overall Concord Between Study Requirements And The Proposal. 01 Appropriateness Of Methodology And Timeline (35) Quality And Technical Soundness Of The Proposed Approach And Methodology. 10 Appropriateness Of The Approach: To What Extent The Methodology Is Designed In Response To The Requirements Of The Tor. 10 Quality Of Proposed Implementation Plan, I.e., How The Agency Will Undertake Each Task, And Process Of Completing The Tasks. 05 Risk Assessment - Recognition Of The Risks/peripheral Problems And Methods To Prevent And Manage Risks/peripheral Problems. 05 Feasibility Of Timelines Proposed. 05 Organisational Capacity And Proposed Team (30) Professional Expertise Of The Firm/company/organization, Knowledge And Experience With Similar Projects, Contracts, Clients And Consulting Assignments. 10 Team Leader: Relevant Experience, Qualifications, And Position With The Agency. 10 Team Members: Relevant Experience, Skills & Competencies. 05 Adequacy And Organization Of The Team, I.e., How Sufficient The Number Of Team Members And Composition To Fulfil The Roles & Responsibilities. 05 Total Points 70 For This Rfp, The Technical Proposal Has A Total Score Of 70 Points. Bidders Must Score A Minimum Of 49 Points To Be Considered Technically Compliant And In Order For The Financial Proposals To Be Opened. Financial Proposal Has A Total Score Of 30 Points. The Technical Proposal Must Comprehensively Address Each Deliverable, Outlining A Detailed Plan To Achieve Them Within The Specified Timeframe. Each Deliverable Should Be Clearly Defined, With Corresponding Strategies, Methodologies, And Timelines For Implementation. The Proposal Should Demonstrate A Thorough Understanding Of The Project Objectives And How The Proposed Approach Will Effectively Meet Them. Also, The Proposal Should Highlight Any Innovative Or Unique Aspects Of The Proposed Methodology That Will Contribute To The Project's Success. In Addition To The Technical Proposal, A One-page Curriculum Vitae (cv) Of All Team Members Must Be Submitted Along With A Recent Photo. The Cv Should Provide A Concise Overview Of Each Team Member's Qualifications, Expertise, And Relevant Experience. Furthermore, It Should Include Contact Information For Two Referees - One Professional And One Academic - Who Can Attest To The Applicant's Capabilities And Suitability For The Project. The Final Selection Of The Bidder Will Be Based On A Quality And Cost Basis As Specified In The Rfp.     [1] These Trainings Are Provided In Different Frequencies Based On The Needs. [2] Directorate Of Primary Education [dpe]. (2023). The National Student Assessment 2022: Grades 3 And 5. Https://www.dpe.gov.bd/site/publications/8fedb608-0b49-4935-bf2d-9e15a3b66525/nsa-2022-final-report

Details: Description Project Title : Repair/renovation Of Doña Felomina Building Location : Devmh Compound, Bood, Ubay, Bohol Estimated Project Cost : Php 10,000,000.00 Terms Of Reference Summary Of Works A. General Requirements I. Mobilization/demobilization • The Work Consists Of The Mobilization And Demobilization Of The Contractor’s Forces And Equipment Necessary For Performing The Work Required Under The Contract. Ii. Permits And Licenses • Process And Submit Electrical Design Review Including Sign And Seal Of Electrical Plans, Electrical Review, Analysis, Computations And Signature Of Pee On Electrical Plans And Including All Forms And Plans For The Application Of Permit To Construct (ptc) For Doh Licensing. Design And Analysis Should Be Submitted Prior To Commencement Of Civil Works. Iii. Temporary Facilities • Temporary Facilities Shall Be Provided During The Construction Period And Will Be Constructed Within The Hospital Compound, Which Shall Serve As The Field Office, Storage Of Materials And Bunkhouse For The Workers. The Contractor Shall Provide And Maintain Temporary Power & Lighting, Temporary Water Service & Security Within The Construction Site. Iv. Health, Safety & Environment Control (complete Ppe, Safety Equipment & Devices & Safety Accessories And Signages) • Safety/warning Signage Must Be Placed By The Contractor On The Construction Area With Clear Demarcation Of Construction Zones To Prevent Unauthorized Access. • Detours And Closures: Provide Directions For Alternate Routes And Notice Of Any Closed Areas. • Hazard Notifications: Provide Signs Indicating Potential Dangers In Construction Areas (e.g., "hard Hat Area," "no Entry"). • Emergency Information: Clear Guidance On Emergency Exits And Procedures During Construction. • Fall Protection: Always Use Safety Harnesses And Guardrails. • Weather Conditions: Avoid Dismantling In High Winds, Rain, Or Extreme Temperatures. • Team Communication: Maintain Clear Communication Among Team Members And Healthcare Facility Engineering Team To Coordinate Movements And Tasks. V. As-built (record) Drawings & Related Documents • Submit One (1) Completed Set Of Signed And Sealed As-built Plans (whiteprint Copy) • Submit One (1) Set Of Electronic Files Of Signed And Sealed As-built Plans (cadd Editable File) • The Drawings Shall Be Supplemented With Descriptive Specification As Appropriate To Clearly Record The Exact Form And Content Of Work Described In This Specification And On The Drawings. • Maintain A Complete And Accurate Record Of All Changes Or Deviations To The Contract Documents And Shop Drawings In The Trade Contractor’s Field Office. Such Record Copy Shall Indicate The Work As Actually Constructed And Be Available For Hospital Appointed Engineer To Review. • Incorporate All Minor Revisions And Clarifications Noted Thru The Field Modification Process Which May Not Necessarily Be Shown On The Architectural Drawings Or Issued As Addenda, Bulletins, Or Change Orders. • Field Changes Shall Be Neatly And Correctly Shown On One Set Of Record Prints On A Daily Basis By The Foreman, Or Superintendent Of Are Each Trade; And This Set Will Act As A Record Set At Completion Of The Work And Is Intended To Be Of Assistance To The Trade Contractor In Preparing Record Documents. Vi. Material Sustainability • The Contractor Shall Use At Least Ten Percent (10%) Locally Manufactured Materials For The Project. Submit Purchase Order And Other Supporting Documents As Evidence. • The Contractor Shall Avoid Using Building Materials/products That Contain Toxic Chemicals Or Use Materials That Are Low In Volatile Organic Compound. Please Refer To The Following • Materials Specification As Stated On This Terms Of Reference. • The Contractor Shall Only Used Light Bulbs And Electrical Devices With More Efficient Models And Type As Specified On Approved And Signed Bill Of Quantities (e.g. Led Bulbs). Submit Purchase Order And Other Supporting Documents As Evidence. • The Contractor Shall Conform To The Following Painting And Other Wet Applied Materials (such As Coatings, Sealants) Requirements: 1. Only Qualified Products With Mpi "environmentally Friendly" E1 E2 E3 Rating Will Be Used. Paints, Coatings, Thinners, Solvents, Cleaners And Other Fluids Used In Repainting, Shall:  Not Contain Methylene Chloride, Chlorinated Hydrocarbons, Toxic Metal Pigments.  Be Manufactured Without Compounds Which Contribute To Ozone Depletion In The Upper Atmosphere.  Be Manufactured Without Compounds Which Contribute To Smog In The Lower Atmosphere. Be Manufactured In A Manner Where Matter Generating A 'biochemical Oxygen Demand' (bod) In Undiluted Production Plant Effluent Discharged To A Natural Watercourse Or A Sewage Treatment Facility Lacking Secondary Treatment Does Not Exceed 15 Mg/l.  Be Manufactured In A Manner Where The Total Suspended Solids (tss) Content In Undiluted Production Plant Effluent Discharged To A Natural Watercourse Or A Sewage Treatment Facility Lacking Secondary Treatment Does Not Exceed 15 Mg/l. 2. Paints And Coatings Must Be Manufactured And Transported In A Manner That Steps Of Processes, Including Disposal Of Waste Products Arising There From, Will Meet Requirements Of Applicable Governmental Acts, By-laws And Regulations In The Philippines. 3. Paints And Coatings Must Not Be Formulated Or Manufactured With Formaldehyde, Halogenated Solvents, Mercury, Lead, Cadmium, Hexavalent Chromium Or Their Compounds. Eco Labeled. 4. Anti-corrosive Coatings: Provide A Certification By The Manufacturer That Products Supplied Comply With The Volatile Organic Compound (voc) And Chemical Component Restrictions Of Green Seal Environmental Standard Gc-03, If The Product Is An Anti-corrosive Coating Applied Indoors And On-site. 5. Other Interior Coatings: If The Product Is Applied Indoors And On-site, And Not Covered By Both The Green Seal Environmental Standard Gs-11 And Standard Gc-03, Provide A Certification By The Manufacturer That Products Supplied Comply With The Chemical Component Restrictions Of The Green Seal Environmental Standard Gs-11, Paints, And Comply With The Volatile Organic Compound (voc) Restrictions Of The State Of California Air Resources Board (carb) Suggested Control Measure For Architectural Coatings, And The South Coast Air Quality Management District Rule 1113: Architectural Coatings B. Civil Works I. Site Works • The Contractor Shall Be Responsible In Setting Out Reference Lines, Elevations (lines And Grades) Prior And During The Execution Of The Works. All References Shall Be Maintained And Protected By The Contractor At His Own Expense. Disturbed References Shall Be Restored To Its Original Position Without Extra Cost To The Healthcare Facility. • Work Includes But Is Not Limited To:  Demolition/clearing Works For Ceiling  Demolition/clearing Works For Concrete Walls  Chipping Of Existing Tile Setting Ii. Structural & Concrete Works (refer Applicable Sections On Chapter 4 Of The Nscp, For Quality Of Materials, Workmanship, Execution, Acceptance, Etc.) Iii.1. General • Provide All Labor, Materials, Equipment, Transportation, And Services Required To Complete All Work Specified Herein Indicated Or As Shown On The Drawings. • Work Includes But Is Not Limited To:  Wall Footing, 3500 Psi  Concrete Countertop Sink, 3500 Psi  Stiffener Columns And Lintel Beams At Door And Window Openings, Every 3m Width And 2.1m Height Of Chb 2500 Psi Iii.2. Standards • Except As Modified By Governing Codes And By Contract Documents, Comply With The Provisions And Recommendations Of The Following, Latest Edition:  Ansi American National Standards Institute  Astm American Society For Testing Of Materials  Aci American Concrete Institute  Nbcp National Building Code Of The Philippines And Its Revised Irr  Nscp National Structural Code Of The Philippines Iii.3. Concrete • Structural Concrete – Concrete Pouring Using Concrete Strength 3,500 Psi, Class Aa Ready Mix Or Job Mixed Concrete Together With The Concrete Cylinder Sample For Testing Materials. • Concrete Mix Shall Be Subject To Adjustment To Attain The Required Strength Or Desired Mix Consistency, Subject To Approval Of The Hospital Engineer. • Portland Cement, Type 1 • Manufactured Or River-run Run Gravel For Structural Concrete, ¾ “max Properly Graded” • Washed Sand For Structural Concrete • Water: Use Potable Water Free From Alkaline Or Deleterious Substance That May Affect The Strength Of Concrete. Use Of Rain Water Will Not Be Permitted. • All Materials Shall Be Free From Clay, Lumps Or Any Deleterious Object Or Matter That Will Impair The Strength Of Concrete. • Mixing Shall Be Thoroughly Done In A Mixer Of An Approved Size And Type To Insure A Uniform Distribution Of The Materials Throughout The Mass. • Site-mixed Concrete (job Mixed Concrete) - All Structural Concrete Shall Be Machine-mixed For At Least 1 ½ Minutes After All Materials Including Water Are In The Mixing Drum. No Hand Mixing Shall Be Allowed, Except In Case Of Emergency Of Breakdown During Pouring Operations. • Ready-mixed Concrete - Mixed And Delivered From A Plant Approved By The Project Manager, And Shall Be In Strict Compliance With The Requirements Set Forth In Astm C94. • Concrete Shall Be Placed Only After All Formworks, Materials To Be Embedded, And Preparation Of Surface Involved In The Placing Have Been Inspected And Approved By The Hospital Engineer. The Contractor Shall Provide Equipment And Shall Employ Methods That Will Minimize Separation Of Aggregates From The Concrete Mix. Concrete In Columns Shall Be Placed In One Continuous Operation. Concrete In Girders, Beams And Slabs In Superstructures Shall Be Poured In A Monolithic And Continuous Manner. No Construction Joint Shall Be Allowed On Any Part Of The Structure Without The Approval Of The Hospital Engineer. • Slump Of Concrete Shall Not Exceed 3 Inches • Placement Of Concrete Shall Be In Accordance To Standard Norms, When Using Portable Concrete Mixers. • Cure Concrete Sprinkling Water And Wetted Continuously For 7-day Period. Iii.4. Thermal Moisture Protection • Except As Modified By Governing Codes And By Contract Documents, Comply With The Provisions And Recommendations Of The Following, Latest Edition:  Ansi American National Standards Institute  Astm American Society For Testing Of Materials  Aci American Concrete Institute  Nbcp National Building Code Of The Philippines And Its Revised Irr  Nscp National Structural Code Of The Philippines Iii.5. Steel Reinforcements • Steel Reinforcements Shall Be Astm A615, Deformed Steel Bars, Grade 40. • Supply, Fabricate And Install Reinforcing Steel As Shown On Drawings. Placing Of Steel Reinforcements Shall Be In Accordance With Current Industry (local) Code (or Aci-347). • Secure The Reinforcements Using #16 G.i. Tie Wires. • Steel Reinforcement Shall Be Provided Together With All The Necessary Tie Wires, Spacers, Support And Other Necessary Devices. Reinforcing Steel Shall Be Accurately Cut And Bent In Accordance With The Approved Detailed Reinforcement Drawings. The Hospital Engineer May Require The Contractor To Prepare And Submit Bar Cutting Schedule Prior To Fabrication Of Reinforcing Steel Bars. • Steel Reinforcements Shall Be Free From Mill Scales, Rusts, Oils, Contamination That Will Impair The Bonding Property To Concrete. Iii.6. Structural Steel, Metal Works And Stainless Ladder (refer Chapter 5 Of The Nscp) • Provide All Labor, Materials, Equipment, Transportation, And Services Required To Complete All Work Specified Herein Indicated Or As Shown On The Drawings. • Work Includes But Is Not Limited To:  Prefabrication Of Stainless Steel 304 Ladder Handle, And Manhole Cover. • Materials Steel And Metals For The Works Shall Meet The Requirements Of Astm A36, Hot-rolled Shapes And Plates. • All Steels Shall Be Primed With Epoxy-based Paint With -2- Finish Coats, Color Sample Must Be Submitted To Architect’s/engineer’s For Approval. Substrate Preparation Shall Meet The Requirements Of The Applicable Clauses Of The Steel Structures Painting Council, For Industrial Type Of Construction. All Surfaces Shall Be Free From Mill Scale, Rusts, Oils Or Any Contaminants Detrimental To Adhesion Of Paint. • Welding Works Shall Be In Accordance With Structural Welding Code (american Welding Society-d1.1, Latest Edition). Welding Electrodes Shall Be E6013 And E6012, Minimum, Meeting The Requirements Of Aws A.5. All Welders Shall Meet The Qualifications Under The Aws Codes And Standards. • All Works Under This Item Shall Be Subject To Verification By The Engineer Prior To Commencement Of Fabrication. Contractor Is To Submit Shop Drawings For Architect’s/engineer’s Review Prior To Execution. Iii.7. Formworks • All Forms Shall Be Designed By The Contractor For A Safe Construction Activity And Installed To Dimensions Shown On The Drawings. • Use Phenolic Boards On Formworks With Shoring Supports. • Forms Shall Be Used Whenever Necessary To Confine The Concrete And Shape It To The Required Lines And Dimensions, Or To Protect The Concrete From Contamination. Forms Shall Have Sufficient Strength To Withstand The Pressure Resulting From Placement And Vibration Of The Concrete, And Shall Be Maintained Rigidly In Correct Position. Forms Shall Be Sufficiently Tight To Prevent Loss Of Mortar From The Concrete. • Stripping Of Forms Shall Only Commence After The Concrete Has Gained Sufficient Strength (min Of 7 Days) For Major Structural Elements. C. Architectural Works Furnish Materials And Labor And All Incidentals Necessary For The Completion Of All Architectural Works Shown On Drawings And As Herein Specified. I. Paint Finishes • Paint Materials And Samples Swatches Shall Be Approved By The Architect. • Examine Substrate And Conditions Under Which Painting Will Be Performed. Proceed With The Work Only When Conditions Are Satisfactory. • Do Not Paint Over Dirt, Rust, Scale, Grease, Moisture, Scuffed Surfaces, Or Conditions Otherwise Detrimental To Formation Of A Durable Paint Film. • Clean Surfaces To Be Painted Before Applying Paint Or Surface Treatments. Remove Oil And Grease Prior To Mechanical Cleaning. Program Cleaning And Painting So That Contaminants From Cleaning Process Will Not Fall Into Wet, Newly-painted Surfaces. • Perform Preparation And Cleaning Procedures In Accordance With Paint Manufacturer’s Instructions And As Herein Specified, For Each Particular Substrate Condition. • Ferrous Metals: Clean Non-galvanized Ferrous-metal Surfaces That Have Not Been Shop Coated; Remove Mortar, Plaster, Grease, Dirt, Rust, Loose Mill Scale And Other Foreign Substances By Solvent Or Mechanical Cleaning Methods That Comply With The Recommendations Of The Steel Structures Painting Council, Before Priming Coat Is Applied. I. Floor Finishes • Tile Works  General: All Surfaces To Receive Tiles, Shall Be Free From Loose Plaster, Where Required, Existing Setting Mortar Bed Shall Be Stripped, Removed To Allow Proper Setting Of Tiles To Desired Finished Elevation. No Separate Payment For Trimming Existing Mortar Bed And Shall Be Deemed Included Elsewhere.  Material Shall Be Subject To Review And Approval Of The Architect. Contractor To Submit Samples For Color And Texture Selection Prior To Delivery And Installation.  All Floor Cuttings On Both Ends Of The Walls Shall Be Of Equal Width.  Tile Grout Color To Match Color Of Tiles Or As Directed By The Architect.  Setting Bed Or Mortar Shall Be Dry Mixed, Sand-cement Mix With Water Added To Produce The Desired Consistency And Slurry Mix For Adhesion. Use Tile Adhesive For Areas That Are Less Than 1.5 Inches From Finish Floor Line.  All Exposed Corner Edges Shall Be Provided With Aluminum Stair Nosing.  No Human Traffic Or Construction Loads Shall Be Applied To All Newly Installed Tiles, And Allow Setting Mortar And Adhesive To Cure Prior. • Floor Tile Works  Common Areas – 60cmx60cm Glazed Ceramic Floor Tiles.  Service Areas – 60cmx60cm Unglazed, Non-skid Ceramic Floor Tiles.  Toilets And Janitor’s Closet – 30cmx30cm Non-skid Ceramic Floor Tiles.  Cuttings On Both Ends Of The Walls Shall Be Of Equal Width With The Floor Finish.  All Exposed Corner Edges Shall Be Provided With Pvc Tile Trims.  No Human Traffic Or Construction Loads Shall Be Applied To All Newly Installed Tiles, And Allow Setting Mortar And Adhesive To Cure Prior. Ii. Wall & Ceiling Finishes • Wall Tile Works  All Toilets – 30cmx60cm Glossy/polished Ceramic Tiles.  Cuttings On Both Ends Of The Walls Shall Be Of Equal Width With The Floor Finish.  All Exposed Corner Edges Shall Be Provided With Pvc Tile Trims. - No Human Traffic Or Construction Loads Shall Be Applied To All Newly Installed Tiles, And Allow Setting Mortar And Adhesive To Cure Prior. • Painting Works  Paint Materials And Samples Swatches Shall Be Approved By The Architect.  Examine Substrate And Conditions Under Which Painting Will Be Performed. Proceed With The Work Only When Conditions Are Satisfactory.  Do Not Paint Over Dirt, Rust, Scale, Grease, Moisture, Scuffed Surfaces, Or Conditions Otherwise Detrimental To Formation Of A Durable Paint Film.  Clean Surfaces To Be Painted Before Applying Paint Or Surface Treatments. Remove Oil And Grease Prior To Mechanical Cleaning. Program Cleaning And Painting So That Contaminants From Cleaning Process Will Not Fall Into Wet, Newly-painted Surfaces.  Perform Preparation And Cleaning Procedures In Accordance With Paint Manufacturer’s Instructions And As Herein Specified, For Each Particular Substrate Condition.  Ferrous Metals: Clean Non-galvanized Ferrous-metal Surfaces That Have Not Been Shop Coated; Remove Mortar, Plaster, Grease, Dirt, Rust, Loose Mill Scale And Other Foreign Substances By Solvent Or Mechanical Cleaning Methods That Comply With The Recommendations Of The Steel Structures Painting Council, Before Priming Coat Is Applied. • Painting Systems  Exterior Surfaces: - Concrete, Concrete Masonry, Rendered Smooth - Concrete Neutralizer – One (1) Coat, Dry For 6 Hours. - Putty Surface Imperfections, Hairline Cracks With Patching Compound Using Putty Knife - Prime – Two (2) Coats Flat Latex, Dry For Two (2) Hours. - Topcoat – Two (2) Coats Of Semi-gloss Latex, Two (2) Hours Interval Between Coats. - Thinning / Clean-up Solvent – Water - Application – By Brush, Roller, Or Airless Spray  Interior Surfaces: - Concrete, Concrete Masonry, Rendered Smooth - Concrete Neutralizer – One (1) Coat, Dry For 6 Hours. - Putty Surface Imperfections, Hairline Cracks With Patching Compound Using Putty Knife. - Prime – Two (2) Coats Flat Latex, Dry For Two (2) Hours. - Topcoat – Two (2) Coats Of Semi-gloss Latex, Two (2) Hours Interval Between Coats. - Thinning / Clean-up Solvent – Water - Application – By Brush, Roller, Or Airless Spray  Ceiling & Drywall Surfaces: - Repair Surface Imperfections With Putty Using Putty Knife, Dry For 2 Hours And Sand. - Apply Mesh Tape On Board Joints And Seal Gaps With Patching Compound. Dry For Two (2) Hours And Sand. - Primer – Flat Latex, Dry For Two (2) Hours. - Topcoat – Two (2) Coats Of White Flat Latex Paint, Two (2) Hours Interval Between Coats. - Thinning / Clean-up Solvent - Water - Application – By Brush, Roller, Or Airless Spray • Dry Ceiling, Cove Light & Drop Ceiling  Ceiling - Fiber Cement Board In 4.50mm X 1.2m X 2.4m  Fiber Cement Board Shall Be Stored In Elevated And Well Protected Area. Boards With Broken Edges, Lacerations Etc. Will Not Be Permitted To Be Installed.  Framing - On 0.40mm Thick, 19mm X 50mm Double Furring, And 0.80mm Thick, 12mmx38mm Carrying Channel With Vertical Hanger, Spaced At 0.40m X 0.40m On Centers. • Rendering To Chb Or Concrete Surfaces  All Surfaces To Be Rendered Or Cement Plastered Shall Be Clean From Any Loose Material Or Contamination To Provide Strong Bond Between Plaster And The Surface.  Mix Proportion Shall Not Be Less Than 1 Part Of Cement To 4 Parts Of Screened Sand. Necessary Adjustments Shall Be Made To Provide A Strong And Consistent Mix, Free From Cracking Due To Rapid Hydration Of Plaster Mix.  Tampering Of Previously Mix Concrete Will Not Be Permitted.  All Surfaces To Receive Paint Finish Shall Be Smooth Whilst Surfaces To Receive Tiles Shall Be Rough To Provide Better Adhesion Or Bond. • Doors And Windows  All Wooden Doors Shall Be Kiln Dried And Treated Flush Doors/panel Doors Ready For Installation With The Provisions For Accessories As Indicated On Drawings, Locksets, Door Keys, And Hinge Completely Operational.  All Door Jambs For Wooden Doors Shall Be Pre-fabricated 2”x6” And 2”x4” Wooden Jamb Finished With Automotive Lacquer Paint.  Glass Door (glass/glazing) – 12mm Thk. Tempered Clear Glass On 50mm X 100mm Powder-coated Frameless Sliding Door With 2" X 6" Powder Coated Aluminum Jamb With Complete Hardware Accessories.  Glass Door (glass/glazing) – 1/4” Thk. Clear Glass On 50mm X 100mm Powder-coated Aluminum Framed Sliding Door With 2" X 6" Powder Coated Aluminum Jamb With Complete Hardware Accessories.  Windows (glass/glazing) – 1/4” Mm Thk. Clear Glass Awning Type Analok Aluminum Frame W/ Complete Hardware Accessories And Window Frame Weatherstripping.  All Metal Doors And Jambs – Hollow Core Metal Flush Type Swinging Door With 2" X 6" Steel Jamb – All In Paint Finish By Spray, W/ Complete Hardware And Door Accessories Including Door & Jamb Seals As Indicated On Drawings, Completely Operational.  All Doors And Jambs – Provide All Door Keys With Key Chains And Key Tags With Color And Specifications Subject For Approval Of The Healthcare Facility. • Specialties  Concrete Countertop Sink - Finish – Glossy/polished, Ceramic Tiles, 60cm X 60cm, On All Areas As Indicated On Drawings - Inclusions – Countertop Backsplash And Aprons - Finish And Color – As Selected By Healthcare Facility - Cut Unit To Provide Pattern Indicated And In A Manner That Will Provide Clean, Sharp, Unchipped Edges.  Building/room Signages/wayfinding Systems  Ground Floor - Signages - Room Identification Sign - Chief Nurse Office, 6mm Thick Frosted Acrylic - Room Identification Sign - Pulmonary Unit, 6mm Thick Frosted Acrylic - Room Identification Sign - Physical Therapist Room, 6mm Thick Frosted Acrylic - Room Identification Sign - Janitors Closet, 6mm Thick Frosted Acrylic - Room Identification Sign - Electrical Room, 6mm Thick Frosted Acrylic - Room Identification Sign - Business Office, 6mm Thick Frosted Acrylic - Room Identification Sign - Stakeholders Office, 6mm Thick Frosted Acrylic - Room Identification Sign - Treatment Area, 6mm Thick Frosted Acrylic - Room Identification Sign - Doctors Office, 6mm Thick Frosted Acrylic - Room Identification Sign - Pantry, 6mm Thick Frosted Acrylic - Room Identification Sign - Water Treatment Room, 6mm Thick Frosted Acrylic - Room Identification Sign - Reprocessing Room, 6mm Thick Frosted Acrylic - Room Identification Sign - Waste Holding Area, 6mm Thick Frosted Acrylic - Room Identification Sign - Nurse Station, 6mm Thick Frosted Acrylic - Restroom Identification - Pwd Toilet, 6mm Thick Frosted Acrylic - Restroom Identification – All Gender Toilet, 6mm Thick Frosted Acrylic - Restroom Identification – Staff Toilet, 6mm Thick Frosted Acrylic - Emergency Exit Plan, 6mm Thick Frosted Acrylic G. Plumbing Works Provide All Labor, Materials And Equipment And Perform All The Work Necessary For The Complete Execution Of All The Work As Shown On Drawings And Specified In This Specification. Scope Of Works Shall Include But Does Not Be Limited To The Following Major Items Of Work: • Sanitary And Waterline Piping Works  Furnish And Install Complete Water Distribution System Including Incoming Supply Pipes And Connections, Pipes, Valves, Faucets, Accessories, Etc.  Storage, Delivery, Protection Before Installation And Connection Of Sanitary Line Accessories.  All Sanitary Pipes And Fittings To Be Used Shall Be Made Of Polyvinyl Chloride (pvc Pipes) Series 1000  All Waterline Pipes And Fittings To Be Used Shall Be Made Polypropylene Random Co-polymer (ppr Pipes)  Connections From Existing Water Supply And Existing Catch Basins.  Pressure Testing Of The Installed Water Distribution System.  Leakage Testing Of Soil, Waste, Vent, And Catch Basins And Septic Tank  Disinfections Of Water Distribution System.  Furnish And Install All Required Consumable Materials And Materials Tube Installed.  Investigation Of All Conflicts Of This Work And Coordination With Other Trades. • Plumbing Fixtures, Toilet & Sink Accessories * Submit Samples For Approval Prior To Installation" ** Faucets, Valves & Other Accessories Shall Be Japan, U.s., & E.u. Made  Two-piece Water Closet/s (push Button,4/6 Liters Water Saver) With Wall-mounted Semi- Recessed Ceramic Tissue Holder, Wall-mounted Semi-recessed Ceramic Soap Holder, With Complete Accessories  Lavatory With Pedestal W/ Faucet And W/ Complete Fittings & Accessories  600x400x200x0.8 Mm Stainless Steel Single Bowl Kitchen Sink W/ Complete Fittings & Accessories  Urinal W/ Complete Fittings & Accessories  Ss 304 Towel Bar  Stainless Faucet  Pwd Ss304 Grab Bar (l-type)  Pwd Ss304 Flip-up Bar  Pwd Ss304 Urinal Grab Bar, 2 Pcs Per Set  Stainless Steel 304/brass, Faucet, 1/2" X 6", For Sink  Floor Drain Stainless 6"x6"  Floor Drain Stainless 4"x4" H. Electrical Works Provide All Labor, Materials And Equipment And Perform All The Work Necessary For The Complete Execution Of All The Work As Shown On Drawings And Specified In This Specification. Scope Of Works Shall Include But Does Not Be Limited To The Following Major Items Of Work: • Panel Boards And Circuit Breakers At 3rd Floor  Mdp Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 300at/300af, 3p, 10kaic, 230 V, Bolt-on Type Mccb Branches: 1 - 60at/60af, 2p, 10kaic, 230 V, Mccb 2 - 125at/125af, 2p, 10kaic, 230 V, Mccb  Glp Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 60at/60af, 3p, 10kaic, 230 V, Bolt-on Type Mccb Branches: 12 - 20at/60af, 2p, 10kaic, 230 V, Mcb 2- Space  Gpp Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 125at/125af, 3p, 10kaic, 230 V, Bolt-on Type Mccb Branches: 18 - 30at/60af, 2p, 10kaic, 230 V, Mcb 2- Space  Gpacu Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 125at/125af, 3p, 10kaic, 230 V, Bolt-on Type Mccb Branches: 14 - 30at/60af, 2p, 10kaic, 230 V, Mcb 2- Space • Roughing-ins  20mm Dia. Upvc Pipe, Male Adapter With Locknut  25mm Dia. Upvc Pipe, Male Adapter With Locknut  20mm Corrugated Electrical Flexible Hose  20mm Electrical Flexible Hose Connector  32mm Dia. Upvc Pipe, Male Adapter With Locknut  50mm Dia. Upvc Pipe, Male Adapter With Locknut  65mm Dia. Upvc Pipe, Male Adapter With Locknut  Junction Box With Cover  Utility Box  Square Box  Consumables • Wires And Cables  Thhn/thwn Wire - 2.0mm², 3.5mm², 5.5mm², 8.0mm², 14.0mm², 22.0mm², 50.0mm², 60.0mm², 80.0mm² • Wiring Devices  Single Pole Switch With Led Indicator, Flush Type Modern Series  Duplex Switch With Led Indicator Flush Type Modern Series  Triplex Switch With Led Indicator Flush Type Modern Series  Single Universal Convenience Outlet, 3 Prong Modern Series, 16a, 230v  Duplex Universal Convenience Outlet, 3 Prong Modern Series, 16a, 230v  Duplex Universal Outlet, Floor Mounted Type, 16a, 230v  Gfci Outlet  Acu Outlet, Universal, 30a, 230v W/ Grounding-type • Lighting Fixtures  4"ø Downlight, With 11w Led Recessed Mounted  2x18w Troffer Led Panel Type Lighting Fixture  Emergency Light  Exit Light  30 Watts Led Flood Light I. Auxiliary Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Auxiliary Plan And Specification And As Indicated On Detailed Cost Estimates: • Fire Alarm And Detection System  Roughing-ins / Wires: - 15mmø Emt Pipe, Coupling, Connector - Pull Box - Metal Flexible Conduit 1/2" - Straight Connector 1/2" - Junction Box W/ Cover - Utility Box - Conduit Supports / Hangers - 1.25mm2 Twisted Pair - Consumables - Equipment: - Smoke Detector - 24v Sounder & Strobe Light (combined) - Manual Push Station 24v - Fire Alarm Control Panel 3 Zones, W/ Back-up Battery, 24v • Paging System  Roughing-ins / Wires: - 15mmø Upvc Pipe, Male Adapter With Locknut - Metal Flexible Conduit 1/2" - Straight Connector 1/2" - Junction Box With Cover - 1.25mm2 Twisted Pair - Consumables - Equipment: - Ceiling Speaker • Tel/lan System  Roughing-ins / Wires: - 15mmø Upvc Pipe - 15mm Dia. Upvc Male Adapter With Locknut - Junction Box With Cover - Utility Box With Cover - Utp Cat 6 4pairs - 1 Gang Outlet - Consumables  Equipment: Telephone And Data Outlet • Cctv System  Roughing-ins / Wires: - 15mmø Upvc Pipe - 15mm Dia. Upvc Male Adapter With Locknut - Junction Box With Cover - Utility Box With Cover - Utp Cat 6 4pairs - 1 Gang Outlet - Consumables  Equipment: - Ip Camera Dome Type J. Fire Protection Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Fire Protection Plan And Specification. • Black Iron Pipes, Fittings, Valves And Accessories: - Bi Pipes Schedule 40 @ 6m, Seamless (also Including Drain Pipe Riser And Auto Sprinkler Riser) And All Fittings, Valves And Accessories As Indicated On Detailed Cost Estimates • Sprinkler Heads And Accessories - Pendent Type: 135 Degrees To 165 Degrees • Others – Hangers And Supports, Miscellaneous And Consumables (including Painting And Tagging) • Testing And Commissioning – Configuration, Testing And Commissioning, Documentation, Training And Orientation K. Mechanical Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Mechanical Plan And Specification And As Indicated On Detailed Cost Estimates: • Air-conditioning Works - 4.0 Hp Split Type Aircon, Inverter Type, - 2.5 Hp Split Type Aircon, Inverter Type - 1.0 Hp Split Type Aircon, Inverter Type - Consumables - L. Request For Final Inspection • Contractor Shall Submit Its Written Request For A Final Inspection Of The Project To The Medical Center Chief Office At Least Seven (7) Days Prior To Project Inspection & Turn-over. M. Tools And Equipment • Various Basic And Advanced Masonry/electrical/carpentry Tools • Measuring And Layout Tools • Safety Equipment • Utility Vehicle N. Technical Personnel Required • Project Engineer • Foreman • Leadman • Skilled Personnel (mason, Carpenter, Steelman, Electrician, Plumber) • Laborer/helper General Guidelines • All Construction Works Shall Be Undertaken By Contractor In Accordance With Existing Laws And All Other Applicable Rules And Regulations. • The Contractor Shall Be Responsible In Setting Out Reference Lines, Elevations (lines And Grades) Prior And During The Execution Of The Works. All References Shall Be Maintained And Protected By The Contractor At His Own Expense. Disturbed References Shall Be Restored To Its Original Position Without Extra Cost To Devmh. • The Contractor Shall Carry Out The Works Properly And In Accordance With This Contract. The Contractor Shall Provide All Supervision, Labor, Materials, Plant And Equipment, Which May Be Required. • The Contractor Shall Commence Execution Of The Works On The Start Date And Shall Carry Out The Works In Accordance With The Approved Pert/cpm Network Diagram Submitted By The Contractor, As Updated With The Approval Of The Procuring Entity’s Representative, And Shall Complete The Works By The Intended Completion Date. • The Contractor Shall Be Responsible For The Safety Of All Activities On The Site. • During On-going Construction And Before The Turn-over Of The Project, Engineering & Facilities Management Staff, End-users, Twg And Bac Shall Inspect The Works Undertaken By Contractor. Hospital Engineers And End-users Discover Any Deviations By Contractor From The Approved Construction Plans, Contractor Shall Be Required To Rectify All Such Deviations, Within Such Period Required By Client. • Contractor Shall Have Full Responsibility For Any And All Damages To Existing Hospital Facilities, Utilities, And/or Any Portion Of The Hospital’s Common Area, Due To The Works Undertaken By Contractor, Whether Accidental Or Intentional. • No Variation Order Shall Be Undertaken Unless Verified By Hospital Engineer And Approved By Executive Committee. • Contractor Shall Not Cover Or Block Stub-outs (cleanouts, Water Source, Exhaust, Sewer, Drainage, Etc.) When Not Utilized. Said Stub-outs Shall At All Times Be Free Of Obstructions And Easily Accessible. • Contractor Shall Secure A Utility Tapping Permit Prior To Tapping From Utility Provision. • Electricity And Water Consumed During Construction Shall Be Charged To Contractor. • End-users Reserves The Right To Inspect The Works At Any Time. • Contractor Shall Insure And Hold Client, Its Affiliates, Officers, Directors, Stockholders, Employees, Agents, And/or Representatives, Free And Harmless From And Against Any Injury, Losses, Claims, Damages, Liabilities, Expenses, And/or Costs Of Litigation, Resulting From Or Arising Out Of The Works Undertaken By Contractor. • In Event Of Force Majeure, The Contractor Shall Rectify, Replace Or Build The Unfinished Projects When It Is Not Yet Completed And Accepted W/o Additional Cost For The Procuring Entity. • Contractor Shall Comply With The Construction House Rules Of This Hospital. Time Of Completion • The Completion Of The Project Shall Be One-hundred Twenty (120) Calendar Days From The Date Of Effectivity.

Details: Sources Sought Notice this Is A Sources Sought Notice (ssn) Only. The U.s. Government Is Conducting Market Research Only To Determine The Availability Of Qualified Sources Capable Of Providing Cryoablation Equipment Rental And Consumables To Include Technician Services At The Va Puget Sound Health Care System, Seattle, Wa. Potential Contractors Are Invited To Provide A Response Via E-mail To Contract Specialist At Tracy.heath@va.gov By October 11, 2024, 12:00 Noon (pt). Responses Will Be Used To Determine The Appropriate Strategy For A Potential Acquisition. Please Clearly Identify Any Information Your Company Considers Sensitive Or Proprietary. This Notice Is Issued Solely For Information And Planning Purposes - It Does Not Constitute A Request For Quotation (rfq), Or A Promise To Issue An Rfq In The Future. This Notice Does Not Commit The U.s. Government To Contract For Any Supply Or Service. Further, The U.s. Government Is Not Seeking Quotes, Or Proposals At This Time And Will Not Accept Unsolicited Quotes In Response To This Source Sought Synopsis. The U.s. Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Notice. Submittals Will Not Be Returned To The Responder. Not Responding To This Notice Does Not Preclude Participation In Any Future Rfq, If Any Is Issued. background: The Contractor Shall Provide All Labor, Materials, Transportation, Equipment, And Supervision, In Compliance With Federal, State, And Local Regulations, To Provide Cryoablation Services And Technical Support For The Department Of Veterans Affairs, Puget Sound Health Care System (pshcs) On An As Needed Basis. The Contract Will Require The Contractor To Provide Cryoablation Services With A Minimum Of A Primary And Back-up Technician At The Pshcs. The Va Estimates That There Will Be 1 Patient Per Visit. The Equipment Must Be Prepared To Perform The Procedure At A Mutually Agreed Upon Time And Continue To Perform Procedure Until The Veteran Patient Is Complete. There May Be Scheduled Days That No Procedures Are Needed, And The Facility May Cancel With The Contractor, With A Minimum Of 24 Hours Notice Prior To The Scheduled Day With No Charges To The Government. This Contractor Shall Provide All Services Listed Below To Support Va In Performing Cryoablation On Our Veteran S. naics: 621999, All Other Miscellaneous Ambulatory Health Care Services interested Potential Contractors Please Provide The Following. 1) Company Name, Address, Point Of Contact, Phone Number, Email Address, And Uei please Indicate Business Size: small Disadvantage Business (sdb)____ 8(a)____ historically Underutilized Business Zone (hubzone)____ service-disabled Veteran-owned Small Business (sdvosb)____ veteran-owned Small Business (vosb)_____ economically Disadvantaged Women-owned Small Business (edwosb)_____ women-owned Small Business Concerns (wosb)_____ small Business_____ large Business_____ please State If You Possess A Federal Supply Schedule (fss)______. Please State The Group Your Gsa Fss Schedule Is Under ________ 2) Please Submit A Brief Capability Statement (maximum Three Pages) With Enough Information To Demonstrate To The Veterans Affairs That You Have The Resources, Personnel, And Experience To Perform Services Pertaining To Cryoablation To Include Equipment And Technician Services As Required In The Attached Draft Statement Of Work. **draft Statement Of Work statement Of Work cryoablation Equipment Rental & Technician Services the Department Of Veterans Affairs puget Sound Health Care System 1660 S. Columbian Way, Seattle, Wa 98108 contract Title. Cryoablation Machine Rental & Technician Services background. the Center's Mission Is To Be Able To Treat Veterans With Kidney And Renal Tumors. Cryoablation Is A Less Invasive Way To Treat Tumors. Cryoablation Is A Process That Uses Extreme Cold (cryo) To Destroy Or Damage Tissue (ablation). Cryoablation Is Used In A Variety Of Clinical Applications Using Hollow Needles (cryoprobes) Through Which Cooled, Thermally Conductive, Fluids Are Circulated. Cryoprobes Are Inserted Into Or Placed Adjacent To Tissue Which Is Determined To Be Diseased In Such A Way That Ablation Will Provide Correction Yielding Benefit To The Patient. When The Probes Are In Place, The Cryogenic Freezing Unit Removes Heat ("cools") From The Tip Of The Probe And By Extension From The Surrounding Tissues. Ablation Occurs In Tissue That Has Been Frozen By At Least Three Mechanisms: (1) Formation Of Ice Crystals Within Cells Thereby Disrupting Membranes And Interrupting Cellular Metabolism Among Other Processes; (2) Coagulation Of Blood Thereby Interrupting Blood Flow To The Tissue In Turn Causing Ischemia And Cell Death; And (3) Induction Of Apoptosis, The So-called Programmed Cell Death Cascade. The Most Common Application Of Cryoablation Is To Ablate Solid Tumors Found In The Lung, Liver, Breast, Kidney, And Prostate. The Use In Prostate And Renal Cryoablation Are The Most Common. Although Sometimes Applied Through Laparoscopic Or Open Surgical Approaches, Most Often Cryoablation Is Performed Percutaneously (through The Skin And Into The Target Tissue Containing The Tumor) By A Medical Specialist, Such As An Interventional Radiologist. scope. the Contractor Shall Provide All Labor, Materials, Transportation, Equipment, And Supervision, In Compliance With Federal, State, And Local Regulations, To Provide Cryoablation Services And Technical Support For The Department Of Veterans Affairs, Puget Sound Health Care System (pshcs) On An As Needed Basis. The Contract Will Require The Contractor To Provide Cryoablation Services With A Minimum Of A Primary And Back-up Technician At The Pshcs. The Va Estimates That There Will Be 1 Patient Per Visit. The Equipment Must Be Prepared To Perform The Procedure At A Mutually Agreed Upon Time And Continue To Perform Procedure Until The Veteran Patient Is Complete. There May Be Scheduled Days That No Procedures Are Needed, And The Facility May Cancel With The Contractor, With A Minimum Of 24 Hours Notice Prior To The Scheduled Day With No Charges To The Government. This Contractor Shall Provide All Services Listed Below To Support Va In Performing Cryoablation On Our Veteran S. 3.1 Definitions: the Following Terms When Used In This Contract Shall Be Defined As Follows: 3.1.1 Acceptable Quality Level (aql): The Aql Is The Maximum Percent Defective That, For Purposes Of Sampling Inspections Can Be Considered Satisfactory. 3.1.2 Contracting Officer (co): A Person Duly Appointed With The Authority To Enter Into And Administer Contracts On Behalf Of The U.s. Government. Contracting Officers Are Responsible For Ensuring Performance Of All Necessary Actions For Effective Contracting, Ensuring Compliance With The Terms Of The Contract, And Safeguarding The Interests Of The United States In Its Contractual Relationships. 3.1.3 Contracting Officer's Representative Cor: An Individual Designated By The Contracting Officer To Act As His/her Representative To Assist In Administering A Contract. The Source And Authority For A Cor Are Contained In The Written Letter Of Designation. The Contracting Officer May Delegate One Or More Vamc Employees Who Are Responsible For Monitoring The Performance Of The Contractor. 3.1.4 Customer Complaint: A Means Of Documenting Certain Kinds Of Contract Service Problems. A Government Program That Is Explained To Every Organization That Receives Service Under This Contract, Which Is Used To Evaluate Contractor S Performance. 3.1.5 Pshcs: Puget Sound Health Care System 3.1.6 Non-personal Services Contract: A Contract Under Which The Personnel Rendering The Services Are Not Subject, Either By The Contract S Terms Or By The Manner Of Its Administration, To The Supervision And Control Usually Prevailing In Relationships Between The Government And Its Employees. 3.1.7 Performance Requirements Summary (prs): Identifies The Key Service Outputs Of The Contract That Will Be Evaluated By The Government To Assure Contract Performance Standards Are Met By The Contractor. 3.1.8 Quality Control: Those Actions Taken By A Contractor To Control The Performance Of Services So That They Meet The Requirements Of The Pws. 3.1.9 Quality Improvement (qi): The Ongoing Process Of Responding To Data Gathered Through Quality Monitoring Efforts, To Improve The Quality Of Health Care Delivered To Individuals. This Process Involves Follow-up Studies Of The Measures Taken To Effect Change In Order To Demonstrate That The Desired Change Has Occurred. 3.1.10 Quality Monitoring (qm): The Ongoing Process Of Assuring That The Delivery Of Health Care Is Appropriate, Timely, Accessible, Available, Medically Necessary And In Keeping With Established Guidelines And Standards And Reflective Of The Current State Of Medical Knowledge. 3.1.11 Cryoablation: Cryoablation Is A Process That Uses Extreme Cold (cryo) To Destroy Or Damage Tissue (ablation). Cryoablation Is Used In A Variety Of Clinical Applications Using Hollow Needles (cryoprobes) Through Which Cooled, Thermally Conductive, Fluids Are Circulated. Cryoprobes Are Inserted Into Or Placed Adjacent To Tissue Which Is Determined To Be Diseased In Such A Way That Ablation Will Provide Correction Yielding Benefit To The Patient. When The Probes Are In Place, The Cryogenic Freezing Unit Removes Heat ("cools") From The Tip Of The Probe And By Extension From The Surrounding Tissues. 3.1.12 Jc: Joint Commission: An Independent, Not-for-profit Organization, The Joint Commission Accredits And Certifies More Than 18,000 Health Care Organizations And Programs In The United States. Joint Commission Accreditation And Certification Is Recognized Nationwide As A Symbol Of Quality That Reflects An Organization S Commitment To Meeting Certain Performance Standards. 3.2 Specific Requirements: 3.2.1 The Contractor S Technical Personnel Shall Be Certified, Trained, And Current In Cryoablation And Operation Of The Equipment Units. The Technician Shall Assist The Attending Physicians In The Operating Room In The Operation Of The Equipment Units. The Technician May Be Required To Operate The Device And Any Related Imaging Equipment During The Procedures. 3.2.2 The Contractor Shall Provide A Surgical Laser Or Other Equipment Along With A Technician For An Operation. Technicians Are Non-physician And Are Unable To Legally Provide Services On Patients Unless Under Supervision And Control Of A Physician. 3.2.3 Va Will Use The Equipment And Supplies Solely For The Benefit Of Its Patients Or Patients Health Organizations And Entities That Are Subsidiaries Of Or Affiliated With Va (collectively, The Affiliates). For Purposes Of This Agreement, Affiliated With Means A Facility Or Entity That Is Controlled By Va. 3.2.4 The Equipment Must Meet Or Exceed The Following Criteria Brand Name Or Equal To: Galil Visual Ice Cryoablation System And Needles. Must Be Compatible With The Below Specifications. Gas Supplies Furnished By Va. system Specifications: operating Conditions Temperature: 10â°c To 40â°c relative Humidity 30% To 75% gas Supply Specifications: argon Cylinder purity Level: 99.998% Or Higher solid Particle Size: <5 µm helium Cylinder purity Level: 99.995% Or Higher solid Particle Size: <5 µm gas Cylinder Specifications maximum Pressure: 6000 Psi recommended Volume Of Gas Cylinders: 42-50 L connector Valve: Cga677 consistent Gas Flow Rates Maintained. software Controls That Optimize Performance Of Simultaneous Activation Of Multiple Needles. secondary Internal Gas Dryers That Produce Consistent Iceballs And Boost Freezing Performance. equipment Shall Be Small And Portable Due To Limited Space In The Or. multiple Tumors- Multiple Needles Can Be Used Simultaneously, Independent Needle Control For Up To 10 Needles. large Patient = At Least 23cm Shaft To Accommodate Deep Lesions Or Tumor. sharp Trocar Needle Tips For Easy Needle Insertion In A Range Of Configurations That Produce Various Iceball Sizes And Shapes, Allowing The Clinician To Match The Needles To The Desired Ablation Zone. multi-point Thermal Sensors (mts) Contain Four Sensor Locations Along The Distal Shaft Of The Needle To Monitor Temperature Near The Target Site And Adjacent Critical Structures. cryoablation Needles And Mts Are Supplied Sterile In Procedure Kits Or In Needle Kits. equipment Has Needle Track Ablation. equipment Has Cautery Function. equipment Can Be Programed For Freeze And Thaw Phases. 3.2.5 Additional Materials And Supplies, Including Consumables (i.e., Electrodes), Are Necessary To Conduct Cryoablation Procedures With The Equipment Units. 3.2.6 Maintenance Of The Devices To Include Service And Preventative Maintenance To Ensure That The Devices Are In The Highest Level Of Functioning Condition, With, As A Minimum, Maintenance Performed At The Manufacturer S Preventative Maintenance Schedule. Maintenance Logs Or Copies Must Always Be Available. Contractor Shall Be Responsible For Cleaning The Machine After Each Use. 3.2.7 Assist In The Education Of Each Facility S Personnel As It Relates To Cryoablation. 3.2.8 Be Responsible For Obtaining All Necessary Licenses, Approvals, Permits And Be In Compliance With All Federal, State, And Local Laws And Regulations Applicable To The Devices And Delivery Of Cryoablation Related Services Provided For Under The Terms Of This Contract. 3.2.9 Delivery Of All Reports, Digital, Film And File Records Of All Procedures Performed With The Devices To The Interventional Radiology Staff. These Medical Records Shall Be The Property Of The Department Of Veterans Affairs, Pshcs/663 Facility. 3.2.10 The Contractor Shall Perform All Services Under This Contract In Accordance With Any And All Regulatory And Accreditation Standards Applicable To The Individual Va Facility, Including Without Limitations, Those Required By The Joint Commission (tjc) And/or Association Of Acrreditation For Ambulatory Surgery Centers (aaa) Certification For The State Of Washington Shall Comply With All Veterans Health Administration (vha) Regulations And Directives. Contractor Shall Provide Consultation, If Requested, In The Development Of Protocols, Utilization Review, Peer Review, And Risk Management As Required By Regulatory Bodies. 3.2.11 Equipment Provided Shall Meet Criteria, Passes Bio-medical Check, And Performs Functions As Designed. Equipment Arrives To The Radiology Department (check-in) Va Administrative Staff Will Contact Va Bio-med For Safety Check Before Entering Operating Room (or). 3.2.12 Contractor Shall Arrive To The Radiology Department And Check-in 1 Hour Prior To Scheduled Procedure Time. personnel. 4.1 Qualifications Contractor Shall Provide Personnel Under This Contract With The Following Qualifications: have An Unrestricted License In A Us State, Territory Or Commonwealth Of The Untired States Or District Of Columbia. able To Read, Write, Speak, And Understand The English Language; And be A Us Citizen. 4.2. Citizenship Related Requirements: If Technically Qualified United States Citizens Will Be Given Preference Over, Non-citizens In Accordance With Current Regulations. Non-citizens Must Provide Proof Of Eligibility To Work And An E-verify Printout. 4.3. Contractor Shall, Without Additional Expenses To The Government, Be Responsible For Obtaining All Necessary Licenses, Approvals, And Permits And Be In Compliance With All Federal, State And Local Laws And Regulations Applicable To The Cryoablation Related Services Provided For Under This Contract. The Contractor Will Be Responsible For Providing This Information To The Cor, If Requested. 4.4. Contractor Personnel Shall Be Subject To The Same Quality Assurance Standards, Meeting Or Exceeding Current Recognized National Standards As All Regular Pshcs Employees. Contractor Personnel Shall Perform The Services In Accordance With The Ethical, Professional, And Technical Standards Of Pshcs. 4.5. Contractor Shall Immediately Notify The Contracting Officer And Cor Anytime A Contractor Employee(s) And/or Facility Are Involved In Malpractice Actions Or Loss Of Certification. 4.6. Technical Proficiency: 4.6.1. All Care Provided To Veterans Is Expected To Be Of The Highest Quality And Is Subject To Peer Review, Focused Professional Practice Review, Ongoing Professional Practice Review, And Quality Assurance Activities. 4.6.2. Adhere To Pshcs Rules And Regulations. 4.6.3. Participate, With Pshcs Staff, In Developing The Patient S Plan Of Care Provide Feedback To The Pshcs Staff As The Plan Of Care Is Executed And Coordinated Revisions To The Plan Of Care, If Required. 4.6.4. The Services To Be Performed: Shall Be Performed In Accordance With Va Policies, Procedures, And The Regulations. The Government May Evaluate The Quality Of Professional And Administrative Service Provided, But Retains No Control Over The Medical, Professional Aspects Of Services Rendered (e.g., Professional Judgments, And/or Diagnosis For Specific Medical Treatment). 4.6.5. The Services Required In This Awarded Contract Shall Be Performed In Accordance With Established Principles And Ethics Of The Profession. The Quality Of Healthcare Provided Shall Meet Or Exceed The Current Recognized Standards Established By The American Medical Association (ama), Http://www.amaassn.org/ Joint Commission (jc), Http://www.jointcommission.org/standards/ And Those Of Other Professional Associations, Which Specify Standards Of Performance For The Medical Profession. 4.7. Conflict Of Interest: See Vha Handbook 1660.3, Conflict Of Interest; Aspects Of Contracting For Scarce Medical Specialist Services; Enhanced Use Leases; Health Care Resource Sharing; Non-va Purchased Care (fee Basis); And Intergovernmental Personnel Action Agreements (ipas). These Publications And Handbooks Are Available At: Http://www1.va.gov/vhapublications/index.cfm 4.8. Citizenship Related Requirements: If Technically Qualified United States Citizens Will Be Given Preference Over, Non-citizens In Accordance With Current Regulations. Non-citizens Must Provide Proof Of Eligibility To Work And An E-verify Printout. 4.9. Office Of Inspector General (oig) Statement: The Contractor Is Required To Check The Hhs Office Of Inspector General List Of Excluded Individuals/entities On The Oig Website (www.hhs.gov/oig) For Each Person Providing Services Under This Contract To Ensure That The Individuals Providing Services Under The Contract Have Not Engaged In Fraud Or Abuse Regarding Sections 1128 And 1128a Of The Social Security Act Regarding Federal Health Care Programs. Further, The Contractor Is Required To Certify In Its Proposal That All Persons Listed In The Contractor S Proposal Have Been Verified As Not Appearing On The Oig List. during The Performance Of This Contract, The Contractor Is Prohibited From Using Any Individual Or Business Listed On The List Of Excluded Individuals/entities. 4.10. Technical Direction: 4.10.1. Submission: As Part Of The Pre-award Contractor Responsibility Determination And During The Performance Of The Contract For The Purpose Of On-going Contractor Competency Evaluation, The Va Will Perform Or Require For Evaluation, From The Offeror/contractor One Or More Of The Following: 4.10.1.1. Submission Of Information To Allow Evaluation Of Their Qualifications And Past Performance. This Information Should Be Specific, Concise, And Complete And Provide Sufficient Information To Demonstrate The Offeror S Capacity To Meet Or Exceed The Requirements Of The Contract. 4.10.1.2 Submission Of Evidence Of Accomplishment Of Training And Education That Is Required By The Terms Of The Contract; And 4.10.1.3. Submission Of Evidence Of Experience And Achievements In Work Similar To That Required By The Contract. Board Certification Or Licensure That Meets Or Exceeds Standards Relative To The Industry Being Contracted. 4.11. Contractor Will Not Refer A Provider Who Has Had A Terminated License, Registration Or Certification For Cause, Or If The Provider Voluntarily Relinquished Such License, Registration Or Certification In Any State After Being Notified In Writing By A State Of Potential Termination For Cause. (the Definition For Cause Is Substandard Care, Professional Misconduct, Or Professional Incompetence. ) All Providers Assigned By The Contractor Shall Have A Current, Full And Unrestricted License To Practice Medicine In Any State, Territory, Or Commonwealth Of The United States Or In The District Of Columbia. If Required By The State Of Licensure, Current Registration Shall Also Be Maintained. invoices. Invoices Shall Be Submitted Monthly In Arrears With The Following Information: contract Number And Billing Number station Id (663) dates Of Service And Patient S Medical Record Number price invoices Will Be Billed As Individual Line Items As They Are Listed In The Price Schedule. monthly Invoices Will Contain Only Those Cases Worked For That Month. Previous Invoiced Caseload Shall Not Be Intermingled With Current Invoice. Invoices Not Received In Proper Format Will Be Returned. pshcs Will Not Pay Any Hiring Fees If The Contract Cryoablation Technicians Is Hired For A Permanent Position. The Government Agrees Not To Pursue Contractor Personnel To Be Hired Permanently At The Va. safety Requirements. 6.1. In The Performance Of This Contract, The Contractor Shall Take Such Safety Precautions As The Contracting Officer Representative (cor), Or His Designee May Determine To Be Reasonable And Necessary To Protect The Lives And Health Of Occupants Of The Building. The Contracting Officer Representative (cor) Or His Designee Will Notify The Contactor Of Any Non-compliance With The Foregoing Provisions And The Action To Be Taken. The Contractor Shall After Receipt Of Such Notice, Immediately Correct The Condition To Which Attention Has Been Directed. Such Notice, When Served On The Contractor Or His Representative At The Site Of The Work, Shall Be Deemed Sufficient For The Purpose Aforesaid. If The Contractor Fails Or Refuses To Comply Promptly, The Contracting Officer May Issue An Order Stopping All Or Any Part Of The Work And Hold The Contractor In Default. 6.2. Cryoablation Technicians Are Required To Use Universal Precautions To Guard Against Possibility Of Accidental Exposure To Blood-borne Pathogens. Pshcs Will Provide Appropriate Personal Protective Equipment (ppe). Cryoablation Technicians Will Follow The Guidance Provided In The Pshcs Sops Regarding Infection Control, Safety, And Hazardous Waste Management. Non- Personal Services: 7.1. It Is Expressly Agreed And Understood That This Is A Non-personal Services Contract, As Defined In Federal Acquisition Regulation (far) 37.101, Under Which The Professional Services Rendered By The Contractor, Or Its Health-care Providers Are Rendered In Its Capacity As An Independent Contractor. The Contractor And Its Health-care Providers Shall Be Liable For Their Liability-producing Acts Or Omissions. The Contractor Shall Maintain Or Require All Health-care Providers Performing Under This Contract To Maintain, During The Term Of This Contract, Professional Liability Insurance Issued By A Responsible Insurance Carrier. However, If The Contractor Is An Entity Or A Subdivision Of A State That Either Provides For Self-insurance Or Limits The Liability Or The Amount Of Insurance Purchased By State Entities, Then The Insurance Requirement Of This Contract Shall Be Fulfilled By Incorporating The Provisions Of The Applicable State Law. 7.2. An Apparently Successful Offeror, Upon Request Of The Contracting Officer, Shall, Prior To Contract Award, Furnish Evidence Of The Insurability Of The Offeror And/or Of All Health-care Providers Who Will Perform Under This Contract. The Submission Shall Provide Evidence Of Insurability Concerning The Medical Liability Insurance Required By Paragraph (a) Of This Clause Or The Provisions Of State Law As To Self-insurance, Or Limitations On Liability Or Insurance. 7.3. The Contractor Shall, Prior To Commencement Of Services Under The Contract, Provide To The Contracting Officer Certificates Of Insurance Or Insurance Policies Evidencing The Required Insurance Coverage And An Endorsement Stating That Any Cancellation Or Material Change Adversely Affecting The Government. 7.4. The Contractor Shall Notify The Contracting Officer If It, Or Any Of The Health-care Providers Performing Under This Contract, Change Insurance Providers During The Performance Period Of This Contract. The Notification Shall Provide Evidence That The Contractor And/or Health-care Providers Will Meet All The Requirements Of This Clause, Including Those Concerning Liability Insurance And Endorsements. These Requirements May Be Met Under Either The New Policy, Or A Combination Of Old And New Policies, If Applicable. 7.5. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (e), In All Subcontracts For Health-care Services Under This Contract. The Contractor Shall Be Responsible For Compliance By Any Subcontractor Or Lower-tier Subcontractor With The Provisions Set Forth In Paragraph 7.1 Of This Clause. 7.6. Non-employee Status: The Parties Agree That Such Personnel Working Under This Contract Shall Not Be Considered Va Employees For Any Purpose And Shall Be Considered Employees Of The Contractor. The Relationship Of The Parties Is Not And Shall Not Be Construed Or Interpreted To Be A Partnership, Joint Venture, Or Agency. The Relationship Of The Parties Is An Independent Contractor Relationship. 7.7. Tort: Contractor Employees Are Not Covered By The Federal Tort Claims Act. When The Contractor Or Its Employee Has Been Identified As A Provider In A Tort Claim, The Contractor Is Responsible For Notifying The Contractor S Legal Counsel And/or Insurance Carrier. Any Settlement Or Judgment Arising From A Contractor Or Employee S Action, Or Non-action Is The Responsibility Of The Contractor And/or Insurance Carrier. The Contractor Shall Provide A Copy Of Current License And Malpractice Insurance Certificate. Key Personnel And Emergency Substitutions: 8.1. The Contractor Shall Assign To This Contract Key Personnel To Include Name/position/phone #: name/position/ Phone #: To Be Determined. 8.2 The Provider Assigned By The Contractor Shall Fall Under All The Existing Pshcs Quality Monitors Relating To Services Provided Such As, Medical Records Review, Peer Review, Incident Reporting, Infection Control, Etc. 8.3. The Government Reserves The Right To Refuse Acceptance Of A Contractor, If Personal Or Professional Conduct Jeopardizes Patient Care Or Interferes With The Regular And Ordinary Operation Of The Facility. Breaches Of Conduct Include Intoxication Or Debilitation Resulting From Drug Use, Theft, Patient Abuse, Dereliction, Or Negligence In Performing Directed Tasks, Or Other Conduct Resulting In Formal Complaints By Patient Or Other Staff Members To Designated Government Representatives. Standards For Conduct Shall Mirror Those Prescribed By Current Federal Personnel Regulations. The Contracting Officer, Administrative Contracting Officer And Contracting Officer's Representative Shall Deal With Issues Raised Concerning Contract Personnel's Conduct. The Final Arbiter Is The Contracting Officer. 8.4. The Contracting Officer Representative Shall Resolve Complaints Concerning Contractor Relations With The Government Employees Or Patients. In The Event That The Contractor Is Involved And Named In A Validated Patient Complaint, And The Government Is Unable To Resolve The Issue The Government Reserves The Right To Refuse Acceptance Of The Services Of Such Personnel. In The Event Of Incidents Involving Physical Or Verbal Abuse The Contractor Will Be Immediately Removed From The Facility And Will Not Return Until Clearance Is Given By The Contracting Officer And The Facility Director. In The Event Any Issues Cannot Be Resolved The Contracting Officer Is The Final Authority On Validating Complaints. 8.5. Pshcs Personnel Shall Brief The Contractor On Vamc Policies And Procedures On The First Scheduled Duty Day. hours Of Operation: Normal Clinic Hours Are From 7:00 Am To 5:00 Pm. 9.1. Contractor S Employee Must Be Present At The Va Facility During Required Hours And Must Be Performing The Required Services Identified In The Performance Work Statement To Invoice For Hours Worked. The Payments For Holiday Time (for Work Performed In The Case Of An Emergency) And For Any Leave, Including Sick Leave Or Vacation Time Is The Responsibility Of The Contractor. The Services Covered By This Contract Shall Be Furnished By The Contractor During Work Hours As Defined Herein. 9.2. Any Hours Worked Beyond The Normally Scheduled Shifts Shall Be Reviewed By The Chief Of Staff And Approved By The Cor To Determine Appropriateness. Any Time Worked Deemed Unnecessary By The Chief Of Staff Will Not Be Paid By The Va. 9.3. Work Schedule: Depending Upon Staffing Levels The Work Hours Will Be: a. Regular Working Hours: Any Time Between 7:00 Am And 5:00 Pm, Monday Through Friday That Is Not A Federal Holiday. b. Non-working Hours: Any Hours Outside Those Shown As Regular Working Hours. Federal Holidays Are Considered Non-working Hours. During Non-working Hours The Contractor Shall Be Available To Respond To Emergency Situations Arising At The Va Within 60 Minutes Of Notification; c. Federal Holidays: Are Those Holidays Observed By The United States Government: I.e., New Year's Day, Martin Luther King Day, President's Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas Day And Any Other Day Specifically Declared By The President Of The United States To Be A Federal Holiday. 9.4. Cancellation Policy: Puget Sound Vamc Reserves The Right To Withdraw Any Or All Service Requirements If They Become Available From Other Vamc S Or An Cryoablation Technician Is Hired At Pshcs. Any Reduction In Service Requirements Shall Be At No Charge To The Government. Contractor Responsibilities: Services Required: This Contract Is To Provide Cryoablation Technician Services To Pshcs In Accordance With Public Law 104-262 And 38 U.s.c.8153. 10.1. Standards Of Practice: Contractor Shall Be Responsible For Meeting Or Exceeding Va And Joint Commission (or Equivalent) Standards. 10.2. The Contractor Shall Be Responsible For Protecting The Personnel Furnishing Services Under This Contract. To Carry Out This Responsibility, The Contractor Shall Provide The Following For These Personnel: Worker S Compensation. a. Professional Liability Insurance. b. Health Examinations Income Tax Withholding, And c. Social Security Payments. 10.3. By Signing This Solicitation, The Contractor Hereby Acknowledges That It Is And Will Continue To Comply With State Workers Compensation Laws That Are Applicable To The Contractor. While It Is Understood By The Federal Government That Workers Compensation Laws May Not Apply To A Contractor With Respect To That Contractor S Independent Contractors And As Such That Contractor Will Not Be Required To Make Workers Compensation Premium Payments For Such Independent Contractors, It Is Wholly The Burden And Responsibility Of The Contractor To Make Such A Determination Pursuant To State Workers Compensation Laws. The Federal Government Does Not Offer Any Legal Advice On Such A Determination And Contractors Are Encouraged To Seek Independent Legal Advice When Making Such A Determination. 10.4. The Contractor Shall Comply With All Current Vha Policies. The Contractor Is Required To Meet Vha Performance And Quality Criteria And Standards Including, But Not Limited To, Customer Satisfaction, Preventative Index, Chronic Disease Index And Clinical Guidelines. Performance And Quality Standards May Change During The Course Of The Contract. New Or Revised Quality/performance Criteria Or Standards Will Be Provided To The Contractor Before Their Implementation Date. Compliance With Mandated Performance Is Required As A Condition Of This Contract. 10.5. The Services Required In This Agreement Shall Be Performed In Accordance With Established Principles And Ethics Of The Medical Profession. The Quality Of Healthcare Provided Shall Meet Or Exceed The Current Recognized Standards Established By The American Medical Association (ama), Joint Commission (jc), Veterans Health Administration Regulations And Medical Staff By-laws And Those Of Other Professional Associations That Specify Standards Of Performance For The Medical Profession. 10.6. The Contractor Shall Be Responsible For Providing Responsible Management Of Medical Care. Care Provided Will Respect And Integrate The Patient S Beliefs, Values And Cultural Influences. The Contractor Shall Involve The Patient In Care Decisions By Keeping Him/her Fully Informed About The Diagnosis, Plan Of Care And Treatment Goals, Risks And Benefits Of Proposed Treatment, And Prognosis; Shared Decision-making Shall Be Pursued. 10.7. The Contractor Is Not Required To Use The Hospital Computer System. 10.8. Technical Direction And Oversight: Monitoring Of Contractor S Time Shall Be Demonstrated Through Review Of The Completed Study For Each Patient. The Cor Shall Be The Va Official Responsible For Verifying Purchase Order Compliance. After Purchase Order Award, Any Incidents Of Contractor Noncompliance As Evidenced By The Monitoring Procedures Shall Be Forwarded Immediately To The Contracting Officer. 10.9. Hipaa: Contractor And Any Subcontractors Must Adhere To The Provisions Of Hipaa. This Includes Both Privacy And Security Rules Published By Hhs. 10.10. Disclosure: 10.10.1. Professional Standards For Documenting Care: Contract Personnel Are Responsible For Ensuring That Their Documentation Practices Are In Accordance With All Applicable State And Federal Regulations. See Vha Handbook 1907.07, Health Information Management And Health Records. Website Address: Vha Publications: Https://www.va.gov/vhapublications/publications.cfm?pub=2 10.11. Release Of Information: The Following Standard Items Relate To Records Generated In Executing The Contract And Should Be Included In A Typical Electronic Information Systems (eis) Procurement Contract: citations To Pertinent Laws, Codes And Regulations Such As 44 U.s.c Chapters 21, 29, 31 And 33; Freedom Of Information Act (5 U.s.c. 552); Privacy Act (5 U.s.c. 552a); 36 Cfr Part 1222 And Part 1228. contractor Shall Treat All Deliverables Under The Contract As The Property Of The U.s. Government For Which The Government Agency Shall Have Unlimited Rights To Use, Dispose Of, Or Disclose Such Data Contained Therein As It Determines To Be In The Public Interest. contractor Shall Not Create Or Maintain Any Records That Are Not Specifically Tied To Or Authorized By The Contract Using Government It Equipment And/or Government Records. contractor Shall Not Retain, Use, Sell, Or Disseminate Copies Of Any Deliverable That Contains Information Covered By The Privacy Act Of 1974 Or That Which Is Generally Protected By The Freedom Of Information Act. contractor Shall Not Create Or Maintain Any Records Containing Any Government Agency Records That Are Not Specifically Tied To Or Authorized By The Contract. the Government Agency Owns The Rights To All Data/records Produced As Part Of This Contract. the Government Agency Owns The Rights To All Electronic Information (electronic Data, Electronic Information Systems, Electronic Databases, Etc.) And All Supporting Documentation Created As Part Of This Contract. Contractor Must Deliver Sufficient Technical Documentation With All Data Deliverables To Permit The Agency To Use The Data. contractor Agrees To Comply With Federal And Agency Records Management Policies, Including Those Policies Associated With The Safeguarding Of Records Covered By The Privacy Act Of 1974. These Policies Include The Preservation Of All Records Created Or Received Regardless Of Format [paper, Electronic, Etc.] Or Mode Of Transmission [e-mail, Fax, Etc.] Or State Of Completion [draft, Final, Etc.]. no Disposition Of Documents Will Be Allowed Without The Prior Written Consent Of The Contracting Officer. The Agency And Its Contractors Are Responsible For Preventing The Alienation Or Unauthorized Destruction Of Records, Including All Forms Of Mutilation. Willful And Unlawful Destruction, Damage Or Alienation Of Federal Records Is Subject To The Fines And Penalties Imposed By 18 U.s.c. 2701. Records May Not Be Removed From The Legal Custody Of The Agency Or Destroyed Without Regard To The Provisions Of The Agency Records Schedules. contractor Is Required To Obtain The Contracting Officer's Approval Prior To Engaging In Any Contractual Relationship (sub-contractor) In Support Of This Contract Requiring The Disclosure Of Information, Documentary Material And/or Records Generated Under, Or Relating To, This Contract. The Contractor (and Any Sub-contractor) Is Required To Abide By Government And Agency Guidance For Protecting Sensitive And Proprietary Information. records Management Language For Contracts Required 10.12.1 The Following Standard Items Relate To Records Generated In Executing The Contract And Should Be Included In A Typical Electronic Information Systems (eis) Procurement Contract: 10.12.2 Citations To Pertinent Laws, Codes And Regulations Such As 44 U.s.c Chapters 21, 29, 31 And 33; Freedom Of Information Act (5 U.s.c. 552); Privacy Act (5 U.s.c. 552a); 36 Cfr Part 1222 And Part 1228. 10.12.3 Contractor Shall Treat All Deliverables Under The Contract As The Property Of The U.s. Government For Which The Government Agency Shall Have Unlimited Rights To Use, Dispose Of, Or Disclose Such Data Contained Therein As It Determines To Be In The Public Interest. 10.12.4 Contractor Shall Not Create Or Maintain Any Records That Are Not Specifically Tied To Or Authorized By The Contract Using Government It Equipment And/or Government Records. 10.12.5 Contractor Shall Not Retain, Use, Sell, Or Disseminate Copies Of Any Deliverable That Contains Information Covered By The Privacy Act Of 1974 Or That Which Is Generally Protected By The Freedom Of Information Act. 10.12.6 Contractor Shall Not Create Or Maintain Any Records Containing Any Government Agency Records That Are Not Specifically Tied To Or Authorized By The Contract. 10.12.7 The Government Agency Owns The Rights To All Data/records Produced As Part Of This Contract. 10.12.8 The Government Agency Owns The Rights To All Electronic Information (electronic Data, Electronic Information Systems, Electronic Databases, Etc.) And All Supporting Documentation Created As Part Of This Contract. Contractor Must Deliver Sufficient Technical Documentation With All Data Deliverables To Permit The Agency To Use The Data. 10.12.9 Contractor Agrees To Comply With Federal And Agency Records Management Policies, Including Those Policies Associated With The Safeguarding Of Records Covered By The Privacy Act Of 1974. These Policies Include The Preservation Of All Records Created Or Received Regardless Of Format [paper, Electronic, Etc.] Or Mode Of Transmission [e-mail, Fax, Etc.] Or State Of Completion [draft, Final, Etc.]. 10.12.10 No Disposition Of Documents Will Be Allowed Without The Prior Written Consent Of The Contracting Officer. The Agency And Its Contractors Are Responsible For Preventing The Alienation Or Unauthorized Destruction Of Records, Including All Forms Of Mutilation. Willful And Unlawful Destruction, Damage Or Alienation Of Federal Records Is Subject To The Fines And Penalties Imposed By 18 U.s.c. 2701. Records May Not Be Removed From The Legal Custody Of The Agency Or Destroyed Without Regard To The Provisions Of The Agency Records Schedules. 10.12.11 Contractor Is Required To Obtain The Contracting Officer's Approval Prior To Engaging In Any Contractual Relationship (sub-contractor) In Support Of This Contract Requiring The Disclosure Of Information, Documentary Material And/or Records Generated Under, Or Relating To, This Contract. The Contractor (and Any Sub-contractor) Is Required To Abide By Government And Agency Guidance For Protecting Sensitive And Proprietary Information. Administrative: 11.1. Emergency Health Services: The Va Will Render Emergency Health Services For An Incapacitating Injury Or Otherwise Serious Illness Occurring While On Duty. Medical Expenses For Treatment Are Billed To Contract Provider S Medical Insurance. Lost Services Caused By Injury Or Sickness Of Contractor S Employee, Unless Replaced With Another Employee, Will Not Be Invoiced By Contractor. Contractor Will Furnish The Va With The Necessary Injury/illness Form(s) For Reporting Purposes. The Va For Statistical And/or Billing Purposes Will Retain A Copy Of The Complete Form(s). 11.2. Uniforms: Contractor Employees Shall Provide Their Own Contractor Nametags, Which Are To Be Worn At All Times. When Working In The Va Operating Room, Contract Employees Shall Only Wear Va Scrubs. Uniforms, Special Clothing And Equipment That Are Provided By Pshcs Will Be Left At The Workstation Upon Completion Of Duty Shift. 11.3. Identification, Parking, Smoking, And Va Regulations: The Contractor's Employees Shall Wear Visible Identification, Provided By The Department, At All Times While On The Premises Of The Vamc. Parking Is Permitted On The Va Grounds And Is Not Included In This Contract. The Va Will Not Invalidate Or Make Reimbursement For Parking Violations Of The Department Under Any Conditions. Smoking Is Only Allowed In Designated Areas Per Va Policy. Possession Of Weapons Is Prohibited. Enclosed Containers, Including Tool Kits, Shall Be Subject To Search. Violations Of Va Regulations May Result In Citation Answerable In The United States (federal) District Court, Not A Local District, State, Or Municipal Court.

Details: Description Republic Of The Philippines Cordillera Administrative Region Provincial Local Government Unit Of Ifugao Bids And Awards Committee 3rd Floor Peo Bldg., Capitol Compound Lagawe, Ifugao Email Ad.: Bacgoodsifugao13@gmail.com Invitation To Bid Publication No. 16-2024-g (first Publication) For Medical Supplies 1. The Provincial Government Of Ifugao, Through The General Fund Intends To Apply The Sum Of Twelve Million Six Hundred Sixty Thousand Two Hundred Eleven Pesos And 14/100 Only (php 12,660,211.14) Being The Abc To Payments Under The Contract For Publication No. 16-2024-g. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. (please See Attached “annex 1” For The Item/s To Be Bided). 2. The Provincial Government Of Ifugao Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Purchase Order. Bidders Should Have Completed, Within The Last Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Of The Provincial Government Of Ifugao And Inspect The Bidding Documents At The Address Given Below During 8:00 O’clock Am To 5:00 O’clock Pm. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders At The Bids And Awards Committee Office, 3rd Floor, Peo Bldg., Capitol, Lagawe, Ifugao On July 04, 2024 To August 01, 2024 Upon Presenting A Proof Of Payment In Person, Of A Non-refundable Bidding Fee Of Twenty Five Thousand Pesos (php 25,000.00). 6. The Bids And Awards Committee (bac) Of The Provincial Government Of Ifugao Will Hold A Pre-bid Conference On July 11, 2024 At 1:30 P.m. At The Bids And Awards Committee Office, 3rd Floor, Peo Bldg., Capitol, Lagawe, Ifugao, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bids And Awards Committee Office, 3rd Floor, Peo Bldg., Capitol, Lagawe, Ifugao On Or Before 1:30 P.m. Basing On The Bac Office - Wall Clock Of August 01, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On August 01, 2024 At 2:00 In The Afternoon At The Address Stated Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Ifugao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: The Secretariat On Goods Bids And Awards Committee Bacgoodsifugao13@gmail.com 0926-937-1170 Date Of Posting: July 04, 2024 Carmelita B. Buyuccan Bac Chairperson "annex 1" Item No. General Description Qty. Unit Of Issue Unit Cost Total Cost Vii. Medical Supplies Supplier Of Reagents And Supplies For A15 Biosystems Fully Automated Analyzer 1 Blood Urea Nitrogen (bun) 1 Set 2 Blood Uric Acid (bua) 1 Set 3 Cholesterol Reagent 1 Bot 4 Sgot Reagent 2 Box 5 Sgpt Reagent 2 Box 6 Triglyceride Reagent 1 Box Note: Supplier Of Reagents And Supplies For A15 Biosystems Blood Chemistry Analyzer Will Be Responsible For The Monthly/ Weekly Preventive Maintenance And Calibration Of This Particular Machine . Their Technician/engineer Should Be Readily Available For A Visit Upon Request Of End User For Problems Regarding The Machine. Reagents & Supplies For Rt-9200 Blood Chemistry Analyzer,chem-7 And Eon 1 Blood Chemistry Analyzer 7 Blood Urea Nitrogen (bun) 10 Box 8 Blood Uric Acid (bua) 8 Box 9 Cholesterol 10 Box 10 Creatinine 10 Box 11 Erba Norm 3 Box 12 Erba Path 3 Box 13 Glucose 10 Box 14 Hdl Cholesterol 7 Box 15 Sgot Reagent 3 Box 16 Sgpt Reagent 3 Box 17 Triglyceride Reagent 10 Box 18 Thermal Paper,10x31 Mm 9 Pc Note: Supplier Of Reagents And Supplies For Reagents & Supplies For Rt-9200 Blood Chemistry Analyzer,chem-7 And Eon 1 Blood Chemistry Analyzer Analyzer Will Be Responsible For The Monthly/ Weekly Preventive Maintenance And Calibration Of This Particular Machine . Their Technician/engineer Should Be Readily Available For A Visit Upon Request Of End User For Problems Regarding The Machine. Reagents & Supplies For Rt-7200 Hematology Analyzer 19 Cleanser,1l 4 Bottle 20 Concentrated Cleanser,250ml 1 Bottle 21 Diluent,20l 1 Box 22 Lyse,500ml 1 Bottle 23 Calibrator 1 Run 24 Control(l/n/h) 7 Run Note: Supplier Of Reagents And Supplies For For Rt-7200 Hematology Analyzer Will Be Responsible For The Monthly/ Weekly Preventive Maintenance And Calibration Of This Particular Machine . Their Technician/engineer Should Be Readily Available For A Visit Upon Request Of End User For Problems Regarding The Machine. Set Of Reagents & Supplies For Mindray Hematology Analyzer 25 Diluent,20l 10 Box 26 Rinse,20l 8 Box 27 Lyse,500ml 9 Bot 28 Probe Cleanser 11 Bot Note: Supplier Of Reagents And Supplies For Mindray Hematology Analyzer Will Be Responsible For The Monthly/ Weekly Preventive Maintenance And Calibration Of This Particular Machine . Their Technician/engineer Should Be Readily Available For A Visit Upon Request Of End User For Problems Regarding The Machine. Reagents For Finecare Analyzer 29 Ckmb X 25s 5 Box 30 Hba1c X 25s 6 Box 31 Prostate Specific Antigen(psa ) X 25s 5 Box 32 Troponin I X 25s 5 Box 33 Triiodothyronine(t3) X 25s 5 Box 34 Thyroxine(t4) X 25s 5 Box 35 Thyroid Stimulating Hormone(tsh) X 25s 5 Box Supplies And Reagents For Wondo Coagulation Machine 36 Aptt Coagulation Reagents X 24 1 Box 37 Pt Coagulation Reagents X 24 1 Box Note: Supplier Of Reagents And Supplies For Reagents For Finecare Analyzer Will Be Responsible For The Monthly/ Weekly Preventive Maintenance And Calibration Of This Particular Machine . Their Technician/engineer Should Be Readily Available For A Visit Upon Request Of End User For Problems Regarding The Machine. Typing Sera(monoclonal Grouping Reagent) 38 Anti-a And Anti-b 14 Pair 39 Anti-d 14 Bottle Immunochromatographic Card Tests For Dengue Virus W/ Cpr 40 Dengue Igg/igm X 25s 74 Box 41 Dengue Ns1,x10's 71 Box 42 Dengue Test Ns1 Ag,x25’s 19 Box 43 Dengue Duo (dengue Ns1 Ag + Igg/igm)x10’s 4 Box Immunochromatographic Card Tests For Typhoid Fever W/ Cpr 44 Typhoid Igg/igm Combo Rapid Test 78 Box 45 Salmonella Typhi Igg/igm Fast, X25’s 2 Box Immunochromatographic Card Tests For Hepatitis W/ Cpr 46 Anti-hcv 5 Box 47 Hepatitis-a Igg/igm Rapid Test,25's 8 Box 48 Hbsag(hepatitis-b Surface Antigen) 26 Box Tests For Stis W/ Cpr 49 Gram's Stain Composed Of 1 Bottle Of 500ml Crystal Violet,1bottle Of 500ml Gram's Iodine ,1 Bottle Of 500ml Safranin And 1 Bottle Of 500ml Decolorizer 3 Set 50 Hiv Ict,one Step Anti-hiv(1&2),with Cpr 6 Set 51 Rapid Plasma Reagin 1 Box 52 Syphilis One Step Ict Cards(anti Tp/s) 21 Box 53 Syphilis 3.0 Test Plate ,x30’s 2 Box Reagents And Supplies In Clinical Microscopy 54 Applicator Sticks,x1000's 7 Box 55 2% Acetic Acid,1000ml 1 Bot 56 Fecal Occult Blood (fob) W/ Cpr 12 Box 57 H.pylori Ict In Serum W/ Cpr 15 Box 58 Koh,10%,500ml 1 Bot 59 Lugol's Iodine 1 Bot 60 Normal Saline Solution(nss), 1000 Ml/bot 4 Bot 61 Pregnancy Test In Serum 3 Box 62 Pregnancy Test In Urine,x50's 18 Box 63 Urine Sample Container,sterile,screw-capped,3-5ml 5150 Pc 64 Urine Strips,4 Parameters,x100's 61 Bot 65 Urine Strips,10 Parameters,x100's 9 Bot 66 Stool Sample Container,sterile,screw Capped,w/ Spatula,60ml 1800 Pc Supplies For Blood Sample Collection(finger Prick/(venipuncture)) 67 Blood Lancets,sterile Tip,smooth,tri-bevelled,x200's 70 Box 68 Lancing Device,autoclick 9 Pc 69 Blue Top,3ml,x100's 6 Pack 70 Microtainer Tubes Or Mini-collect Tubes,red Top,0.5ml,x100's 10 Pack 71 Microtainer Tubes Or Mini-collect Tubes,violet Top,0.5ml,x100's 127 Pack 72 Red Top,3ml,x100's 50 Pack 73 Red Top,3ml,x100's,w/ Clot Activator 4 Pack 74 Red Top,5ml,100's 10 Pack 75 Tourniquet,flat,soft Rubber 48 Pc 76 Violet Top,2ml,x100's 64 Pack 77 Yellow Top W/ Clot Activator,3ml,x100's 2 Pack Reagents & Supplies In Hematology 78 Capillary Tube Sealer,wax Plates,x10s 12 Box 79 Cover Slip,22mmx22mm,super Clear Glass,x1000's 10 Box 80 Glass Slides,frosted End , X72's 119 Box 81 Glass Slides, Plain, X72's 25 Box 82 Hcl,10%,1l 24 Bot 83 Hema Quick Stain Set Composed Of 4 Solutions, 250ml Each Solution,for The Rapid Staining Of Blood Smears 12 Box 84 Hemocytometer W/ Clear Glass Thick Cover Slip 1 Set 85 Sharps Container,5l,clinical Waste 260 Box Supplies For Random Blood Sugar(rbs),random Blood Uric & Cholesterol Tests 86 Cholesterol Strips For Gcu Glucometer 16 Bot 87 Conical Tubes,centrifuge,10ml,x5's 1 Pack 88 Blood Uric Acid Strips For Gcu Glucometer 15 Bot 89 Glucose Strips For Sd Check Glucometer,x25's 1 Box 90 Glucometer For Glucose Only 1 Set 91 Rbs Strips For Advan Glucometer 21 Bot 92 Rbs Strips For Easy Touch Glucometer 54 Bot Pipettes & Pipettors 93 Micropippetor, 5-50ul 3 Set 94 Micropippetor, 50-200ul 3 Set 95 Micropippetor, 5-10ul 3 Set 96 Micropippetor, 100-1000ml 3 Set 97 Pipette Tips,blue 8 Pack 98 Pipette Tips,yellow 11 Pack 99 Pipette Tips,white,5ml 2 Pack 100 Transfer Pipette,unsterile,measurements Marked Up In 0.5ml, 3ml (length:160mm Drop: 48 Ul, 5ml Increments) 200 Pc Other Laboratory Supplies 101 Giemsa Stain 1 Set 102 Ice Box,small 1 Pc 103 Laboratory Film, 4 Inches X 12.5 Ft. 3 Box 104 Lens Paper,delicate Task Wipers 5 Box Reagents & Supplies For Dental Use 105 Bonding Agent (prime &bond Nt) Total Etch Adhesive For Light Cure Composite Materials 2 Bot 106 Dental Anesthesia, Lidocaine,x 50s 19 Box 107 Dental Needle G-30 Short 4 Box 108 Dental Needle G-27 Short 4 Box 109 Dental Prophylaxis Paste 6 Pc 110 Disposable Dental Towel Paper 100/pck 14 Pack 111 Disposable Saliva Ejector, 100/pack 2 Pack 112 Disposable Microapplicators X 100s 2 Bot 113 Dixon Brush Disposable 500 Pc 114 Etching Gel, 3ml 4 Pc 115 Fast Sprug Lubricants For Ball Bearing Turbines Odorless 2 Bot 116 Gelfoam Dental Paste Absorbable Gulatin, Sponge 3 Tube 117 Hi-speed Dental Burs;assorted Shapes, Inverted, Round, Oval,straight & Tapering 50 Pc 118 Glass Ionomer Restorative Matewrials, Light Cured Shade A2 & A3 1 Tub 119 Low Speed Hand Piece 2 Set 120 Nsk Standard Bearing Hi-speed 10 Pc 121 Oral Prophylaxis Paste 50gr. 1 Tube 122 Stainless Palodent Sectional Matrix Placement/system (round,oval,mini, Standard & Clenegated Shape) 30 Pc 123 Topical Anesthesia 11 Bot 124 Dental Light Cure Composite Material Shade A2 And A3 4 Tube 125 Light Curing Composite Resin Shade A1, A2 And A3 4g 20 Pc 126 Oral Rinse With Flavor 250ml 5 Bot 127 Polishing Strips For Dental Restoration 1 Box 128 Cavity Liner Base Light Curing Composite Restoration Contain Flouride 5 Tube 129 Celluloid Strips 50/box 1 Box Medical Instruments For Dental Use 130 Mouth Mirror W/ Handle (hand Instrument) 5 Pc 131 Dental Cotton Plier 10 Pcs Bandages 132 Bandage, 2", Elastic 72 Roll 133 Bandage, 3" Elastic 72 Roll 134 Bandage, 4" Elastic 144 Roll 135 Bandage, 6" Elastic 72 Roll 136 Elastic Net Wound Dressing Bandage, Strechable 5 Roll Catheters 137 Foley Catheter Indwelling, Fr. 10, 2 Way, Silicone Coated 35 Pc 138 Foley Catheter Indwelling, Fr. 16, 2 Way, Silicone Coated 740 Pc 139 Foley Catheter Indwelling, Fr. 18, 2 Way, Silicone Coated 185 Pc 140 Foley Catheter Indwelling, Fr. 14, 2 Way, Silicone Coated 35 Pc 141 Urine Bag, Adult, Disposable, 2000ml 1300 Pc 142 Urine Collector,pedia, Disposable, 100ml 1750 Pc 143 Rubber Catheter,fr.8,straight 12 Pc 144 Rubber Catheter, Fr. 10, Straight 6 Pc 145 Rubber Catheter, Fr. 12, Straight 6 Pc 146 Rubber Catheter, Fr. 14, Straight 6 Pc 147 Rubber Catheter, Fr. 16, Straight 22 Pc 148 Rubber Catheter, Fr. 18, Straight 12 Pc 149 Suction Catheter,fr.8,straight,sterile 54 Pc 150 Suction Catheter,fr. 10, Sterile, Non-pyrogenic 17 Pc 151 Suction Catheter, Fr. 12, Sterile, Non-pyrogenic 17 Pc 152 Suction Catheter,fr.14,sterile,non-pyrogenic 17 Pc 153 Suction Catheter,16,sterile,non-pyrogenic 35 Pc 154 Suction Cath. Fr. 18, Sterile, Non-pyrogenic 30 Pc 155 Suction Catheter,poole Abdominal Drain 400 Pc Cannulas 156 Oxygen Cannula, Adult, Disposable, Curved, Flared Tip, 2.1m 1130 Pc 157 Oxygen Cannula, Pedia, Disposable 250 Pc 158 Oxygen Cannula; New Born, Curved, Flared Tip Prongs, Disposable 100 Pc 159 Oxygen Cannula; Neonate, Mask Type, Disposable 190 Pc 160 Oxygen Cannula; Mask Type, Adult 120 Pc 161 Oxygen Mask, Pedia 60 Pc 162 Nebulizer Kit, Mask Type, Adult 195 Pc 163 Nebulizer Kit, Mask Type, Pedia 270 Pc 164 Nebulizer Kit, Plastic, T-type 1500 Pc Disinfectants 165 Alcohol,70%,500ml 125 Bot 166 Alcohol Spray,70%,500ml 135 Bot 167 Disinfectant,skin, Alcoholic W/ Sprayer 15 Gal 168 Formalin,37%,1l 16 Bot 169 Glutaraldehyde Antiseptic Solution,5l,28days Shelf Life 60 Gal 170 Hydrogen Peroxide,3% Solution,60ml 135 Bot 171 Hydrogen Peroxide,3% Solution,1 Liter 15 Gal 172 Povidone Iodine Solution,10% 21 Gal 173 Povidone Iodine, Surgical Skin Cleanser: 10%, 1 Gal. 6 Gal 174 Povidone Iodine, Surgical Skin Cleanser: 7.5%, 1 Gal. 2 Gal Dressing Set 175 Adhesive Plaster-micropore, Surgical Tape (hypoallergenic); 1x10yd,2.5cmx9.1m,x 12s 560 Box 176 Cotton, Absorbent 400g 110 Roll 177 Cotton Balls, 50 Balls Per Pack 100 Pack 178 Cotton,applicator (hardwood Sticks,6"),sterile,packaged Sterile In Peel Pouch,100's 5 Pack 179 Gauze, Surgical, White 36x100 Yrds, 2 Ply, 48x24 Mesh 122 Roll 180 Gauze,sponge ,4"x4"-8ply ,40'sx40's 28x24 Mesh,x100's,for Burn Wound Dressing 10 Box 181 Gauze,absorbent,28x24x2ply 10 Roll 182 Cast Padding/wadding Sheet, 5"x6" 10 Pc 183 Plaster Of Paris, 6" X 5 Yards, Quick Setting 15 Pc 184 Prolene Mesh Or Polypropylene Mesh For Hernia 5 Pc 185 Surgical Tape Leukoplast 1.25 Cm X 5m 5 Roll Sutures 186 Chromic 0, Round Needle, 40mm, X 12s 10 Box 187 Chromic 1, Round Needle, 40mm, X 12s 10 Box 188 Chromic 2-0, Round Needle, 40 Mm, 75cm,x 12s, Branded 1 Box 189 Chromic 2-0, Round Needle 35mmx12's Double Arm 10 Box 190 Chromic 2-0, Double Needle ( Cutting + Round) 36mm Half Circle X12's 1 Box Sutures 191 Silk 2-0 With Cutting Needle , X 12s,branded ,sharp Needle 2 Box 192 Silk 3-0, With Round Needle X 12s 2 Box Novosyn Mid-term Synthetic,absorbable Braided & Coated Suture,poly(glycolide-co-l-lactid 90/10) 193 Novosyn 0 Hr37s-90cm,x36's 10 Box 194 Novosyn 1 Hr37s-90cm X 36's 10 Box 195 Novosyn 2/0 Hr37s-90cm X 36's 15 Box 196 Novosyn 3/0 Ds24-70cm X 36's 6 Box 197 Novosyn 3/0 Hr26-70cm X 36's 15 Box 198 Novosyn 4/0 Ds24-70cmx36's 5 Box 199 Novosyn 4/0 Hr22-70cm X 36's 5 Box 200 Novosyn 5/0 Hr17-70cm X 36's 5 Box 201 Novosyn 3/0 Ds19-70cm X 36's 5 Box 202 Novosyn 5/0 Ds19-70cm,x36's 5 Box Quick-short Term Braided,absorbable Polyglactin 910(polyglycolide-co-l-lactid 90/10)suture W/ Coating Polyglactin 370+ Calcium Stearate 203 Novosyn Quick Undyed 2/0 Hr26-70 Cm,x36's 1 Box 204 Novosyn Quick Undyed 2/0 Hr37s-90 Cm,x36's 1 Box 205 Novosyn Quick Undyed 2/0 Hr37s-140 Cm,x36's 10 Box 206 Novosyn Quick Undyed 3/0 Hr 26-70cm,x36's 1 Box 207 Novosyn Quick Episio Set 2/0 Hr37s/hs37s-140cm,36's 21 Box Monofilament Absorbable Glyconate Suture 208 Monosyn Violet 4/0 Ds19-70cm X 36's 10 Box Braided Natural Silk Suture 209 Silkam 2/0 Ds24-75cm,x36's 6 Box 210 Silkam 3/0 Ds24-75cm,x36's 32 Box 211 Silkam 4/0 Ds19-45cm,x36's 6 Box 212 Silkam 5/0 Ds19-45cm,x36's 5 Box 213 Silkam 6/0 Ds12-45cmx36's 5 Box Sterile Single Use Skin Stapler,cartridge Loaded W/ 35 Wide Staples(size:6.9mmx 3.6mm) 214 Skin Stapler,x6's 5 Box Spinal Needles 215 Spinal Needle G23 X 3.5",x25's 5 Box 216 Spinal Needle 25 G23x3.5"(0.53x88cm),x25's 5 Box 217 Spinal Needle 26 G23x3.5" (0.47x88cm),x25's 5 Box 218 Spinal Needle 27 G23x3.5" (0.42x88cm),x25's 5 Box 219 Spinal Needle 29g23x3.5"(0.35x88cm)w/ Guid,x25's 5 Box Infusion Sets 220 Infusion Set(pedia/micro),luerlock,180cm,y Injection Site,branded 1900 Pc 221 Infusion Set(adult/macro),luerlock,15 Um Filter,y Injection Site,branded 2300 Pc 222 Volumetric Iv Administration Set (soluset) 1050 Pc I.v. Catheters 223 Heplock,injection Site Adapter,luerlock,pressure(druck) 4800 Pc 224 Iv Catheter,luerlock,g18x 1 1/4",w/ Wings(1.3x32mm,100ml/min.,w/safety Lock,fep,branded 1850 Pc 225 Iv Catheter,luerlock,g22x 1",w/ Wings(0.9x25mm,35ml/min.,w/safety Lock,fep,branded 2650 Pc 226 Iv Catheter,luerlock,g24 W/ Wings,(0.7x19ml,22mm,60ml/min,w/safety Lock,fep,branded 5100 Pc 227 Iv Catheter,luerlock,g26 W/ Wings,w/ Safety Lock,fep,branded 250 Pc 228 Iv Catheter,luerlock,g20 W/ Wings,1"(1.1x25mm,20ml/min.,w/safety Lock,fep,branded 5100 Pc Recording Papers 229 Autoclave Indicator,universal 110 Pc 230 Cardiogram Paper 80mm X 20m 5 Rolls/box (ecg Paper) 16 Box Lubricants,sterile,alcohol Free,clear,greaseless,water Soluble,gentle & Safe 231 Lubricating Jelly,80g Tube,sterile 55 Tube 232 Lubricating Jelly,150g Tube,terile 280 Tube Supplies For Medical Oxygen Tanks 233 Oxygen Humidifier, Bubbler 300ml 5 Set 234 Oxygen Gauge W/ High Pressure Valve & Flow Meter,heavy Duty, 16 Pc Needles,sterile,single Use,disposable 235 Needle, G21x1,5",hypodermic,disposable X 100s 120 Box 236 Needle, G23 X1" ,hypodermic,disposable X 100s 130 Box 237 Needle, G24x1" ,hypodermic,disposable X 100s 20 Box 238 Needle, G25x1.5" ,hypodermic,disposable X 100s 4 Box 239 Needle, G26x1.5",hypodermicdisposable X 100s 30 Box Nasogastric Tubes 240 Nasogastric Tube Fr.12,125cm 15 Pc 241 Nasogastric Tube,fr.14,125cm 20 Pc 242 Nasogastric Tube,fr.16,125cm 75 Pc 243 Nasogastric Tube Fr.18, 125cm 75 Pc 244 Nasogastric Tube,fr.16,125cm,silicone Coated 45 Pc 245 Nasogastric Tube Fr. 18,125cm; Silicone Coated 35 Pc 246 Nasogastric Tube Fr.5,120cm From Distal End,straight 25 Set 247 Nasogastric Tube Fr.18, 120cm From Distal End/straight 25 Pc Syringes 248 Syringe,asepto, 30ml 183 Pc 249 Syringe, Insulin, 0.5ml;w/ Needle -0.33mmg29 X12.7mm,single Use For 50u Or Less,x 100s 95 Box 250 Syringe, 1 Ml, 25g X 5/8"diposable, Tuberculin,luer Slip W/ Superior Needle,x100's 195 Box 251 Syringe, 3ml, G23x1"(0.60x25mm),sharp Needle,luer Lock,disposable X 100s 380 Box 252 Syringe, 3ml, W/ Needle G23, Disposable, X 100s 250 Box 253 Syringe, 5ml, W/ Needle G23, Disposable X 100s 320 Box 254 Syringe, 20ml, W/ Needle,disposable,x50's 3 Box 255 Syringe , 50ml, W/ Needle Disposable X 25s 2 Box 256 Syringe, 10ml, W/ Needle G23, Disposable X 100s 50 Box 257 Syringe, 10ml, W/ Needle G21, Disposable X 100s 20 Box Thermometers 258 Thermometer, Digital (non Mercurial) 305 Pc 259 Thermometer,rectal 5 Pc 260 Thermometer,digital,non-contact,infrared,operating Range 5-15cm,w/ Aa Batteries 5 Pc Supplies For Ecg & Aed 261 Ecg Electrode Bulb 6 Pc Endotracheal Tubes,high Volume/low Pressure Cuff 262 Endotracheal Tube, Size 2.5, 52 Pc 263 Endotracheal Tube, Size 3 52 Pc 264 Endotracheal Tube, Size 5 55 Pc 265 Endotracheal Tube, Size 6 55 Pc 266 Endotracheal Tube, Size 7 55 Pc 267 Endotracheal Tube, Size 7.5 55 Pc 268 Endotracheal Tube, Size 8 52 Pc Ppe's(personnel Protective Equipments) 269 Examination Gloves,sterile,6.5",x50's 66 Box 270 Examination Gloves,sterile,7.0",x50's 375 Box 271 Examination Gloves,sterile,7.5",50's 175 Box 272 Examination Gloves, Unsterile ,large 205 Box 273 Examination Gloves, Unsterile Medium 205 Box 274 Mask, Face,earloop, Fiberglass-free X 50s 155 Box 275 Cap,surgical, Head,bouffant,disposable X 100's 3 Pack Pulse Oximeter,finger-tip,pocket,sized 276 Pulse Oximeter,infant,bar Graphic And Wave Graphic For Spo2, Pr Inside.one Button Boot, Auto Shut Off In 8 Seconds No Operation. 2 Set 277 Pulse Oximeter,adult 10 Set 278 Pulse Oximeter,child,handheld,display Oled Two Color Display, Waveform Display Spo2,can Also Be Used For Newborns 1 Set Resuscitators 279 "bag Valve Mask Resuscitator W/ Re-breather Bag,adult,manual Resuscitator With Oxygen Tubing, Reservoir Bag And Pressure Limiting Valve,made From Silicone Rubber And Autoclavable Up To 136c. Supplied With Mask, Oxygen Reservoir And Oxygen Tube. Non-sterile,100% Latex Free" 1 Set 280 "bag Valve Mask Resuscitator W/ Re-breather Bag,infant,manual Resuscitator With Oxygen Tubing, Reservoir Bag And Pressure Limiting Valve,made From Silicone Rubber And Autoclavable Up To 136c. Supplied With Mask, Oxygen Reservoir And Oxygen Tube. Non-sterile,100% Latex Free" 1 Set Immobilization Devices 281 Rigid Cervical Collar ,large,hard 2 Pc 282 Rigid Cervical Collar ,large,soft 3 Pc 283 Rigid Cervical Collar,medium,hard 1 Pc 284 Rigid Cervical Collar,medium,soft 1 Pc 285 Rigid Cervical Collar,small,hard 1 Pc 286 Rigid Cervical Collar,small,soft 1 Pc 287 Sling,arm,adult 50 Pc Rubberized Medical Supplies 288 Rubber Sheets, 3ftx 2ft 5 Pc Blades 289 Blade ,no. 10,surgical 10 Box 290 Blade No. 11,surgical 10 Box 291 Blade No.15,surgical 10 Box 292 Medical Shaver 100 Pc Stethoscope 293 Stethoscope,classic Iii,adult 3 Pc 294 Stethoscope,classic Ii,se,infant 2 Pc 295 Stethoscope,classic ,pedia 2 Pc Reagents & Supplies For Radiology 296 Fleet Enema 6 Pc 297 Iopamidol, Iv/ia, 300mg Iodine/ml, 50ml (non-ionic) 2 Bot 298 Thermal Paper 1/2 Cre 57mm X 30m For Sony Ultrasound 2 Roll 299 Ultrasound Transmission Gel, 5 Liters Water Soluble 2 Gal 300 X-ray Film, 11x14, Green Sensitive X 100s 3 Pck 301 X-ray Film, 14x17, Green Sensitive X 100s 3 Box 302 Fujifilm Fuji Hunt Automatic X-ray Developer Replenisher (1 Set Consists Part A, Part B, And Part C. Expiry Should Be More Than 1 Year) 3 Set 303 Fujifilm Fuji Hunt Automatic X-ray Fixer Replenisher (1 Set Consists Part A And Part B. Expiry Should Be More Than 1 Year) 3 Set Other Medical Supplies 304 "ampule Cutter,snap It,multi-use Glass Ampule Opener,lightweight , Pocket Sized With Keyring" 1 Pc 305 Patient's Chart Holder Clipboard Sheet, Plastic 30 Pc 306 Cord Clamp,disposable,sterile,white 1220 Pc 307 Medicine Cup 30 Ml ,plastic 100 Pc 308 Tongue Depressor,wooden, Sterilized 11 Box Electrolyte Analyzer Machine 309 Calibrator 1 4 Bot 310 Calibrator 2 2 Bot 311 Cleaning Solution 1 Bot 312 Na, Ci, Ph Electrode Filling Solution 1 Bot 313 Reference Electrode Filling Solution 1 Bot Hematology Analyzer/hemax 330 314 Lyse, 500 Ml 4 Bot 315 Cleanser 4 Bot 316 Diluent, 20 L 4 Bot 317 Concentrated Cleanser 1 Bot 318 Ez Cleaner 1l 3 Bot 319 Probe Cleaner 1 Bot 320 Distilled Water For Laboratory, 10 Liters 25 Bot 321 Cal-2 For Electrolytes 1 Bot 322 Electrode Filling Solution For Electrolytes 1 Bot 323 Cleaning Solution For Electrolytes 1 Bot 324 Reference Electrode Filling For Electrolytes 1 Bot 325 Hema Control 1 Set Biosystem Semi-automated Chemistry Analyzer 326 Glucose 2 Set 327 Cholesterol 2 Set 328 Triglyceride 2 Set 329 Blood Ure Nitrogen 2 Set 330 Creatinine 2 Set 331 Blood Uric Acid 2 Set 332 Sgot 1 Set 333 Sgpt 1 Set 334 Normal Control 2 Set 335 Abnormal Control 2 Set 336 Mindray Hematology Analyzer Control (l/n/h) 2 Set Reagents And Supplies For Micros Es 60 3 Parts Hemalyzer 337 Abx Minidil (20,000 Ml) 3 Bot 338 Abx Minilyzer (1,000 Ml) 2 Bot 339 Abx Cleaner (1,000 Ml) 4 Bot Reagents And Supplies For Dh 505 Electrolyte Analyzer 340 Cal 1 1 Bot 341 Cal 2 2 Bot Reagents For Biosystems Bts-350 For Blood Chemistry Analyzer, Semi Automated 342 Glucose Biosystem 200 Ml 1 Box 343 Cholesterol Biosystems, 200 Ml 1 Box 344 Triglycerides Biosystems 2 Box 345 Hdl Cholesterol 2 Box 346 Uric Acid Biosystems, 200 Ml 1 Box 347 Creatinine Biosystems 50 Ml 1 Box 348 Urea Biosystems 50 Ml 2 Box 349 Sgpt/alt Biosystems 1 Box 350 Sgot/ast Biosystems 1 Box 351 Normal Controll Biosystems 5 Ml 1 Box 352 Pathologic Control Biosystems 5 Ml 1 Box 353 Tri Level For Bc3600 Mindray 1 Set ***nothing Follows*** Grand Total 12,660,211.14 Prepared By: Eleanor A. Oyami Bac-secretariat Certified Correct: Arundale Gum-u I. Bunnag Bac-secretariat On Goods & Infrastructure

Details: Please Note This Is An Amendment To Rfq 36c25024q0424 To Provide Additional Clarifications; There Is No Extension To The Due Date And Time, If You Wish To Provide A Revised Quote Please Do So No Later Than The Response Time 4/18/2024 @ 12 Pm Edt description this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Items, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As An Rfq. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2023-06. this Solicitation Is Set-aside For: Total Small Business Set Aside the Associated North American Industrial Classification System (naics) Code For This Procurement Is 337127, With A Small Business Size Standard Of 500. The Fsc/psc Is 6515. the Cincinnati Va Medical Center Is Seeking To Replace Outdated Hanel Rotomat. Currently There Is Very Little Space To Efficiently Build Case Carts Due To Space And The Bulkiness Of The Hanel Rotomat. While Logistics And Sps Has To Work In This Space It Is Difficult As Both Disposables And Reusable Medical Devices Are In The Same Room. There Is Very Little Room To Stage Carts Before And After Assembly. all Interested Companies Shall Provide Quotations For The Following: the Sterile Shelves Will Provide A Design Customized For Space To Separate Both Disposables And Reusable Medical Devices. Instituted In The Design Will Allow For A Space For Staging Case Carts To Assembly For The Next Day. Within This Design All Work Including Delivery Of New Carts, Disposal Of Old Carts, And Weekend Installation Will Be Completed By The Vendor. These Carts Have Customed Labeling And Specific Carts For Large To, Small, And Peel Pack Items. the Shelves Will Be Used By The Sterile Processing Service (sps) Staff As Well As Logistics And Other Hospital Staff As Authorized By Sps Management. It Will Be Used To Reorganize The Sterile Storage For Or Adding Space And Organization. It Will Also Separate Disposable And Reusable Medical Device (rmd). The Flat Shelf Option Will Also Increase The Sterile Storage Capacity By 33% Due To The Shelf Option Provided. The Sterile Shelves Will Also Meet The Center For Disease Control S Guideline For Disinfection And Sterilization In Healthcare Facilities, 2008, Updated May 2019 Https://www.cdc.gov/infectioncontrol/pdf/guidelines/disinfection-guidelines-h.pdf. these Shelves Will Support Staging, Assembly Of Case Carts For Surgery, And Mobility For Staff To Occupy The Space. the Contractor Shall Provide Equipment Described Above With The Below Listed Requirements: specific Tasks in Order To Comply With Standards And Guidelines, Sps Will Need Sterile Shelves To Have The Following: meet Infection Control Standards meet Ohsa Dust Free Guidelines maximize 1,147 Sf Of Space To Store Rmd 18 From Sprinkler Heads a Site Visit Will Be Part Of The Rfq Process provide For The Following Estimated Quantities And Dimensions (81) Storage Carts With Slider Shelves 15 ¾ W X 23 5/8 D X 85 13/16 H With 15 ¾ W X 23 5/8 D Stainless-steel Flat Slide In/out Shelves 15 ¾ W X 23 5/8 D Stainless Steel Step Slide In/out Shelves. for Each Cart (26) Storage Carts With Slider Shelves 15 ¾ W X 23 5/8 D X 85 13/16 H With 15 ¾ W X 23 5/8 D X 3 15/16 H Fine Mesh Baskets On Sloping Sliders, 15 ¾ W X 23 5/8 D X 3 15/16 H Baskets, And 15 ¾ W X 23 5/8 D X 7 3/32 H On Fully Extendable Slider. for Each Cart (3) Storage Carts 33 7/8 X 23 5/8 D X 85 13/16 H With (2) 33 7/8w X 23 5/8d X 3 15/16h Baskets On Sloping Sliders (6) 33 7/8w X 23 5/8d X 3 15/16h Baskets (2) 33 7/8w X 23 5/8d X 7 3/32h Baskets On Fully Extendable Slider for Each Cart (1) Storage Cart 56 W X 27 D X 39 3/8 H As A Bench Upon Entering Room (3) 4h Baskets 7h Basket On Fully Extendable Slider need To Create A Minimum 23 Rows With At Least 33 Apart With A Space To Stage Assembly Of Case Carts For Upcoming Surgery Cases Approximately 20 Of Working Space From The Or Entrance. every Storage Cart To Be Configured With Label Holder Per Surgical Service Using Carboard And Plastic Inserts. every Basket Configured With Two Dividers And A Colored Label Per Surgical Service Using Carboard And Plastic Inserts. existing Storage Will Need Removed On The Weekend Between Friday And Sunday. will Handle The Delivery And The Assembly Of The Storage Unit. schedule Requirements: delivery Date: Tbd / Asap the Vendor Will Be Responsible For: scheduling A Site Visit With The Ems Cor, Ems Supervisor, And Engineering Poc To Assess Work Site. upon Contract Acceptance, Vendor Representative Will Schedule A Meeting With Ems Cor, Ems Supervisor, And Other Key Personnel By Contacting The Aus Poc Via Email. There Will Be No Contract Modifications Without Authorization Per Far Part 43 Unless Deemed Necessary By The Contracting Officer At This Point. schedule A Meeting With Ems Cor, Ems Supervisor, And Logistics Poc To Coordinate Color Coding Prior To Bay Assembly And Existing Storage Removal (if Applicable) Time And Date. the Vendor Representative Will Schedule A Time For Removal Of Any Other Existing Storage, If Applicable, And As Stated In Signed Contract With The Ems Cor. The Vendor Representative Will Adhere To The Far Part 22 Application Of Labor Laws To Government Acquisitions, Far Part 44 Subcontracting Policies And Procedures, And The U.s. Department Of Labor Contract Compliance Guideline. (if Applicable) The Worksite Area And Outside Perimeter Will Need To Be Free Of Dirt, Dust, And Debris Following Osha 1910 Before The Construction Crew Leaves For The Day. A Tacky Mat Will Need To Be On The Outside Perimeter In Order To Avoid Dust, Dirt, And Debris To Spread And Contaminate Other Sterile Areas. Tools And Other Equipment Must Be Wiped Down After Each Shift S Use And Needs To Be Replaced If Not Functioning Properly. (if Applicable) Upon Completion Of Removal Of Extra Storage, All Debris Will Be Disposed Utilizing A Covered Cart Utilizing An Assigned Path And Freight Elevator And Assigned Debris Bin In Order To Comply With Cdc S Guidelines For Environment Infection Control In Healthcare Facilities (2003) Https://www.cdc.gov/infectioncontrol/guidelines/environmental/background/index.html. (if Applicable) Schedule A Walkthrough With The Ems Cor, Ems Supervisor, And Engineering Poc Once The Extra Storage Had Been Removed For Any Issues That Needs To Be Addressed Or Verification To Move On With The Installation Of The Sterile Storage Shelving. Any Issues Will Need To Be Address And Fixed Within 24 Hours By The Contractors. vendor Representative Will Ensure That Materials/supplies/accessories Are Complete Prior To Delivery. Vendor Representative Will Ensure That There S No Warped/defective Items Prior To Shipping. The Vendor Representative Will Schedule A Time And Date With The Logistics Warehouse Poc And Ems Cor When The Shipment Can Be Received. Any Missing/backordered Items Will Be Reported To The Logistics Warehouse Poc And Ems Cor Via Email With An Eta. materials/supplies That Is Dented/warped/improper Fit Will Need To Be Replaced By The Vendor. Vendor Will Provide Commercial Product According To Far Part 46.202. vendor Will Inspect And Test Supplies And Services According To Far Part 46.202-2 And Far 46.202-3. vendor Will Have Materials, Supplies, Tools, Equipment, Contract Staff And Other Pertinent Licenses And Certifications Inspected And Completed Needed Prior To Start Of The Project. Any Backorder Of Supplies, Materials, Tools, And Equipment Will Be Addressed And Remedied Prior To Start Of The Requirement. All Osha Certifications Must Be Completed Prior To Start Of The Requirement. the Contractor Will Provide All Necessary Ppe To All Contracted Staff According To Osha Standard 1910 Subpart I And Va Directive 7701. the Contractor Will Install Shelves And Racks According To Manufacturer S Guidelines, Far Part 22 And Osha Part 1910 Subpart Q. after The Installation Is Finished The Contractor Is Responsible For Making Sure That The Worksite Area And Outside Perimeter Is Free Of Dirt, Debris, And Excess Material. All Contractor Owned Equipment And Tools Will Be Removed From The Worksite And A Final Walkthrough Will Be Conducted With The Sps Cor, Sps Chief, And Engineering Poc For Final Approval. the Sps Cor Will Be Responsible For: cor Will Monitor Project From Cradle-to-grave Per Far Part 46. scheduling A Site Visit With The Vendor Representative, Ems Supervisor, And Engineering Poc To Assess Work Site. upon Contract Acceptance, Track Contract Activities And Report If There Is A Need For Any Contract Modifications To The Contracting Officer Via Email. There Will Be No Contract Modifications Without Authorization Per Far Part 43 Unless Deemed Necessary By The Contracting Officer At This Point. schedule A Meeting With The Vendor Representative, Ems Supervisor, And Logistics Poc To Coordinate Color Coding Prior To Bay Assembly And Existing Storage Removal (if Applicable) Time And Date. monitor The Vendor Representative To Schedule A Time For Removal Of Any Other Existing Storage, If Applicable, And As Stated In Signed Contract With The Ems Cor. The Vendor Representative Will Adhere To The Far Part 22 Application Of Labor Laws To Government Acquisitions, Far Part 44 Subcontracting Policies And Procedures, And The U.s. Department Of Labor Contract Compliance Guideline. (if Applicable) Monitor The Worksite Area And Outside Perimeter Will Need To Be Free Of Dirt, Dust, And Debris Following Osha 1910 Before The Construction Crew Leaves For The Day. A Tacky Mat Will Need To Be On The Outside Perimeter In Order To Avoid Dust, Dirt, And Debris To Spread And Contaminate Other Sterile Areas. Tools And Other Equipment Must Be Wiped Down After Each Shift S Use And Needs To Be Replaced If Not Functioning Properly. (if Applicable) Monitor Contractor/ Removal Of Extra Storage, All Debris Will Be Disposed Utilizing A Covered Cart Utilizing An Assigned Path And Freight Elevator And Assigned Debris Bin In Order To Comply With Cdc S Guidelines For Environment Infection Control In Healthcare Facilities (2003) Https://www.cdc.gov/infectioncontrol/guidelines/environmental/background/index.html. (if Applicable) Schedule A Walkthrough With The Contractor Supervisor, Ems Supervisor, And Engineering Poc Once The Extra Storage Had Been Removed For Any Issues That Needs To Be Addressed Or Verification To Move On With The Installation Of The Sterile Storage Shelving. Any Issues Will Need To Be Address And Fixed Within 24 Hours By The Contractors. ensure That Vendor Representative Inspected Materials/supplies/accessories Are Complete Prior To Delivery. Monitor That Vendor Representative Schedule A Time And Date With The Logistics Warehouse Poc When The Shipment Can Be Received. Any Missing/backordered Items Will Be Reported To The Logistics Warehouse Poc Via Email With An Eta. cor Is Responsible For Making Sure That All Supplies And Materials Are Received By Logistics In The Warehouse At The Time Of Delivery According To Far 46.502. monitor All Installation Activities And Address And Document Any Issues/concerns. Report And Document Any Safety And/or Infection Control Issues And Ensure That They Are Corrected Within The Safety And Infection Control Guidelines. upon Installation Completion, Schedule A Walkthrough With Sps Chief, Engineering Poc And Contractor Supervisor For Any Issues/concerns And Correct Findings Within 24-48 Hours. alternate Submissions: offerors Submitting Alternate Items Must Provide Technical Information Sufficient For A Lay Person To Determine Acceptability. Information Will Not Be Paid For By The Government Nor Returned To The Supplying Party. The Information Will Be Used To Determine Product Acceptability. Lack Of Sufficient Information For Our Staff To Determine Product Acceptability Will Result In A Negative Determination. Any Quote Will Then Be Found Non-responsiveness To The Solicitation And The Quote Will Not Be Considered. New Equipment Only; No Remanufactured, Used/refurbished, Or "gray Market" Items. All Items Must Be Covered By The Manufacturer's Warranty. No Product In Development Shall Be Considered. Authorized Dealers: Experienced Firms Only Who Are Authorized Dealers Will Be Considered In Addition To The Original Equipment Manufacturer. A Letter From The Manufacturer Stating Your Company Is An Authorized Dealer For The Line Items Must Be In Possession By The Due Date And Be Available For Submission, If Requested. equipment Items, And Related Services Will Be Delivered, As Required, To: department Of Veteran Affairs cincinnati Va Medical Center 3200 Vine Street cincinnati, Oh 45220 2213 usa period Of Performance delivery Shall Be Provided No Later Than 90 Days After Receipt Of Order (aro). fob: Destination the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Items far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders the Following Subparagraphs Of Far 52.212-5 Are Applicable: 52.232-33, Payment By Electronic Funds Transfer System For Award Management (oct 2018) (31 U.s.c. 3332). all Quotes Shall Be Sent To The Contracting Specialist, Morgan Stein At Morgan.stein@va.gov award Will Be Based Upon A Comparative Evaluation Of Quotes In Accordance With The Simplified Acquisition Procedures Of Far 13. Comparative Evaluation Is The Side By Side Pairwise Comparison Of Quotes Based On Factors (price, Past Performance, Speed Of Delivery) Resulting In A Contracting Officer Decision For The Quote Most Favorable To The Government. the Award Will Be Made To The Response Most Advantageous To The Government. Responses Should Contain Your Best Terms And Conditions. evaluation Of Quotes: the Government Will Select The Quote That Represents The Best Benefit To The Government At A Price That Can Be Determined Reasonable. The Government Will Evaluate The Following: Technical Capability, Past Performance, And Price. following Receipt Of Quotes, The Government Will Perform A Comparative Evaluation Of The Products/services Quoted. The Government Will Compare Quotes To One Another To Select The Product/service That Best Benefits The Government By Fulfilling The Requirement. the Va Will Compare Quotes Against Each Other In An Impartial And Simplified Manner. the Va May Ask Questions To One Or More Submitters But Is Not Obligated To Do So. the Va May Reject All Quotes. the Contracting Officer And Va Users May Use Any Means Available To Examine Past Performance, Such As Contractor Reliability And Reputation And Suitability Of The Product Or Service To Meet The Va S Need. va May Discuss Price Or Price Discounts With The One Or More Submitters Before Awarding An Order Or Rejecting All Quotes. the Va Will Evaluate Quotes For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That A Quote Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). the Evaluation Of Va Requirements Outlined In This Request For Quote Will Determine Suitability. required Documentation: technical Capability the Offeror Must Provide Sufficient Documentation To Allow For Validation Of The Requirements Listed In This Requirement. the Offeror Must Also Provide Sufficient Documentation For Validation On How It Will Meet The Listed Requirements. The Offeror Must Also Provide A Detailed Space Diagram That Indicates The Proposed Layout Of The Equipment Once Installed. the Offeror Must Provide A Timeline For Phase-in, Delivery, Installation Of Proposed Equipment, And Training Of End Users. the Offered Shelves Should Be Of Sufficient Capability To Support The Volume As Described. past Performance the Offeror Is To Provide A List Of No More Than Three (3) Federal, State, And Local Government Contracts Or Private Contracts Of Similar Type, Scope, Size, And Complexity That Are Ongoing, Or Have Been Completed Within The Past 3 Years. each Contract Should Provide Contact Information Of Person/s That Can Be Contacted That Can Provide Relevant Feedback Regarding Equipment Provided And Customer Support Received. the Offeror Is To Provide A Listing Of Any Notifications Of Citations Of Non-compliance With Federal, State And Local Laws And/or Regulations Within The Past Three (3) Years And The Resolution To The Identified Issues. If There Have Not Been Any Citations, Please Be Sure To Indicate So. price total Quote Price Shall Be Inclusive Of All Requirements Listed. submission Of Quotation submission Of Your Response Shall Be Received Not Later Than 12 Pm Noon Eastern Time On April 18, 2024. Please Email Your Submissions To Morgan.stein@va.gov Ensuring The Subject Line States 36c25024q0424 - Sterile Processing Shelves . no Phone Calls Please. quoters Shall List Exception(s) And Rationale For The Exception(s), If Any. late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). an Offeror S Initial Proposal Should Contain The Best Terms From A Price And Technical Standpoint. Offerors Are Reminded There Should Be No Contact With The Facilities Regarding This Rfp During The Solicitation And Evaluation Process. Questions Will No Longer Be Accepted. the Award Will Be Made To The Response Most Advantageous To The Government. Responses Should Contain Your Best Terms, Conditions. to Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" the Following Apply For The Need Of Buy American Act Compliance For All Proposed Equipment: 52.225-1â buy American-supplies as Prescribed Inâ 25.1101(a)(1), Insert The Following Clause: buy American-suppliesâ (oct 2022) (a)â definitions. As Used In This Clause commercially Available Off-the-shelf (cots) Item (1)â means Any Item Of Supply (includingâ constructionâ material) That Is (i)â aâ commercial Productâ (as Defined In Paragraph (1) Of The Definition Of Commercial Product At Federalâ acquisitionâ regulation (far)â 2.101); (ii)â sold In Substantial Quantities In The Commercial Marketplace; And (iii)â offered To The Government, Under A Contract Or Subcontract At Any Tier, Without Modification, In The Same Form In Which It Is Sold In The Commercial Marketplace; And (2)â does Not Include Bulk Cargo, As Defined Inâ 46 U.s.c.40102(4), Such As Agriculturalâ productsâ and Petroleumâ products. componentâ means An Article, Material, Or Supply Incorporated Directly Into Anâ end Product. cost Of Componentsâ means (1)â forâ componentsâ purchased By The Contractor, Theâ acquisitionâ cost, Including Transportation Costs To The Place Of Incorporation Into Theâ end Productâ (whether Or Not Such Costs Are Paid To A Domestic Firm), And Any Applicable Duty (whether Or Not A Duty-free Entry Certificate Is Issued); Or (2)â forâ componentsâ manufactured By The Contractor, All Costs Associated With The Manufacture Of Theâ component, Including Transportation Costs As Described In Paragraph (1) Of This Definition, Plus Allocable Overhead Costs, But Excluding Profit.â cost Of Componentsâ does Not Include Any Costs Associated With The Manufacture Of Theâ end Product. critical Componentâ means Aâ componentâ that Is Mined, Produced, Or Manufactured In Theâ united Statesâ and Deemed Critical To The U.s. Supply Chain. The List Ofâ critical Componentsâ is At Farâ 25.105â . domestic End Productâ means (1)â for Anâ end Productâ that Does Not Consist Wholly Orâ predominantly Of Iron Or Steel Or A Combination Of Both- (i)â an Unmanufacturedâ end Productâ mined Or Produced In Theâ united States; (ii)â anâ end Productâ manufactured In Theâ united States, If- (a)â the Cost Of Itsâ componentsâ mined, Produced, Or Manufactured In Theâ united Statesâ exceeds 60 Percent Of The Cost Of All Itsâ components, Except That The Percentage Will Be 65 Percent For Items Delivered In Calendar Years 2024 Through 2028 And 75 Percent For Items Delivered Starting In Calendar Year 2029.â componentsâ of Foreign Origin Of The Same Class Or Kind As Those That The Agency Determines Are Not Mined, Produced, Or Manufactured In Sufficient And Reasonably Available Commercial Quantities Of A Satisfactory Quality Are Treated As Domestic.â componentsâ of Unknown Origin Are Treated As Foreign.â scrapâ generated, Collected, And Prepared For Processing In Theâ united Statesâ is Considered Domestic; Or (b)â theâ end Productâ is A Cots Item; Or (2)â for Anâ end Productâ that Consists Wholly Orâ predominantly Of Iron Or Steel Or A Combination Of Both, Anâ end Productâ manufactured In Theâ united States, If The Cost Ofâ foreign Iron And Steelâ constitutes Less Than 5 Percent Of The Cost Of All Theâ componentsâ used In Theâ end Product. The Cost Ofâ foreign Iron And Steelâ includes But Is Not Limited To The Cost Of Foreign Iron Orâ steelâ millâ productsâ (such As Bar, Billet, Slab, Wire, Plate, Or Sheet), Castings, Or Forgings Utilized In The Manufacture Of Theâ end Productâ and A Good Faith Estimate Of The Cost Of All Foreign Iron Orâ steelâ componentsâ excluding Cotsâ fasteners. Iron Orâ steelâ componentsâ of Unknown Origin Are Treated As Foreign. If Theâ end Productâ contains Multipleâ components, The Cost Of All The Materials Used In Suchâ end Productâ is Calculated In Accordance With The Definition Of "cost Of Components". end Productâ means Those Articles, Materials, Andâ suppliesâ to Be Acquired Under The Contract For Public Use. fastenerâ means A Hardware Device That Mechanically Joins Or Affixes Two Or More Objects Together. Examples Ofâ fastenersâ are Nuts, Bolts, Pins, Rivets, Nails, Clips, And Screws. foreign End Productâ means Anâ end Productâ other Than Aâ domestic End Product. foreign Iron And Steelâ means Iron Orâ steelâ productsâ not Produced In Theâ united States. Produced In Theâ united Statesâ means That All Manufacturing Processes Of The Iron Orâ steelâ mustâ take Place In Theâ united States, From The Initial Melting Stage Through The Application Of Coatings, Except Metallurgical Processes Involving Refinement Ofâ steelâ additives. The Origin Of The Elements Of The Iron Orâ steelâ is Not Relevant To The Determination Of Whether It Is Domestic Or Foreign. predominantly Of Iron Or Steel Or A Combination Of Bothâ means That The Cost Of The Iron Andâ steelâ content Exceeds 50 Percent Of The Total Cost Of All Itsâ components. The Cost Of Iron Andâ steelâ is The Cost Of The Iron Orâ steelâ millâ productsâ (such As Bar, Billet, Slab, Wire, Plate, Or Sheet), Castings, Or Forgings Utilized In The Manufacture Of The Product And A Good Faith Estimate Of The Cost Of Iron Orâ steelâ componentsâ excluding Cotsâ fasteners. steelâ means An Alloy That Includes At Least 50 Percent Iron, Between 0.02 And 2 Percent Carbon, Andâ mayâ include Other Elements. united Statesâ means The 50 States, The District Of Columbia, Andâ outlying Areas. (b)â 41 U.s.c. Chapter 83, Buy American, Provides A Preference Forâ domestic End Productsâ forâ suppliesâ acquired For Use In Theâ united States. In Accordance Withâ 41 U.s.c. 1907, The Domestic Content Test Of The Buy American Statute Is Waived For Anâ end Productâ that Is A Cots Item (seeâ 12.505(a)(1)), Except That For Anâ end Productâ that Consists Wholly Orâ predominantly Of Iron Or Steel Or A Combination Of Both, The Domestic Content Test Is Applied Only To The Iron Andâ steelâ content Of Theâ end Product, Excluding Cotsâ fasteners. (c)â offerorsâ mayâ obtain From Theâ contracting Officerâ a List Of Foreign Articles That Theâ contracting Officerâ will Treat As Domestic For This Contract. (d)â the Contractorâ shallâ deliver Onlyâ domestic End Productsâ except To The Extent That It Specified Delivery Ofâ foreign End Productsâ in The Provision Of Theâ solicitationâ entitled "buy American Certificate." (end Of Clause) alternateâ iâ (oct 2022). As Prescribed Inâ 25.1101â (a)(1)(ii) Substitute The Following Sentence For The First Sentence Of Paragraph (1)(ii)(a) Of The Definition Of Domestic End Product In Paragraph (a): (a) The Cost Of Itsâ componentsâ mined, Produced, Or Manufactured In Theâ united Statesâ exceedsâ __â percent Of The Cost Of All Itsâ components. [â contracting Officerâ to Insert The Percentage.â ] 52.225-2â buy American Certificate. as Prescribed Inâ 25.1101(a)(2), Insert The Following Provision: buy American Certificate (oct 2022) (a)â  (1)â theâ offerorâ certifies That Eachâ end Product, Except Those Listed In Paragraph (b) Of This Provision, Is A Domesticâ end Productâ and That Each Domesticâ end Productâ listed In Paragraph (c) Of This Provision Contains A Criticalâ component. (2)â theâ offerorâ shallâ list As Foreignâ end Productsâ thoseâ end Productsâ manufactured In Theâ united Statesâ that Do Not Qualify As Domesticâ end Products. For Those Foreign Endâ productsâ that Do Not Consist Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both, Theâ offerorâ shallâ also Indicate Whether These Foreignâ end Productsâ exceed 55 Percent Domestic Content, Except For Those That Are Cots Items. If The Percentage Of The Domestic Content Is Unknown, Select No . (3)â theâ offerorâ shallâ separately List Theâ line Item Numbersâ of Domesticâ end Productsâ that Contain A Criticalâ componentâ (see Farâ 25.105). (4)â the Terms Commercially Available Off-the-shelf (cots) Item, Criticalâ component, "domesticâ end Product," "end Product," And "foreignâ end Product" Are Defined In The Clause Of Thisâ solicitationâ entitled "buy American-supplies." (b)foreignâ end Products: line Itemâ no. country Of Origin exceeds 55% Domestic Content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[list As Necessary] (c)â domesticâ end Productsâ containing A Criticalâ component: line Itemâ no.â ___ [list As Necessary] (d)â the Government Will Evaluateâ offersâ in Accordance With The Policies And Procedures Ofâ partâ  25â of The Federalâ acquisitionâ regulation. (end Of Provision) additional Clarifications: the Inventory List Provided Appears To Be All The Sets, But Does Not Include The Logisticsâ items Mentioned In The Solicitation.â  Can You Provide A List Of Sku'sâ for The Logistics Items As Well? there Are No Logistical Items For This Requirement; The Requirement Is To Remove And Dispose Of The Current Shelving / Carts, And Install New Shelving / Carts To Adequately Accommodate The Inventory On The List Provided there Is A Mention Of A Fully Extendable Slider.â  Is This A Ball Bearing Telescoping Slide, Or Simply The Ability To Pull Out The Baskets Completely? a Fully Extendable Slider Is Not Required clarifications Of Sps Expectations From Vendors: proposed Designs Should Include A Staging Area For Building Case Carts For The Surgery Cases. shelving Carts Need To Be Labeled With Service And Tray Type. separate Disposable, Expendable Items From Reusable Items. (sps Items On One Side And Logistics Items On The Other Side) utilize The Space Where The Rotomat Hanel Was Removed To Maximize Space. do Not Want It Maximized. create Workflow To Navigate When Picking Case Carts From Aisle To The Next With Enough Room To Fit Two Carts In An Aisle Or 7 Of Space. install New Carts On The Weekend And Removal And Disposal Of Old Carts. the Awardee Will Be Responsible For Getting It To Where It Needs To Go.â  The Scope Will Be For Both The Procurement Of The Items, Their Assembly, And Install questions With Answers: is The Intention To Place The Existing Sterile Storage Product In The New Space To Include The Units Described In The Bid? Use The Shelving In The Additional Storage Room? the Requirement Is To Replace Any Current Means Of Storage By Maximizing The Room S 1,147 Sf Of Space With The Technical Requirements Listed Within The Specific Tasks And Performance Monitoring Sections Of The Rfq would It Be Appropriate To Repurpose And Of The Existing Shelving To Reconfigure It In The New Room? Presuming That It Fits Along With The Desired Additional Shelving In The Bid? no do You Want The Room Maximized If It Could Fit Additional Storage Above The Numbers In The Bid? no would The Project Lead Be Opposed To A Top Track System To Maximize The Storage In The Room? (example Below) need To Create A Minimum 23 Rows With At Least 33 Apart With A Space To Stage Assembly Of Case Carts For Upcoming Surgery Cases Approximately 20 Of Working Space From The Or Entrance. We Do Not Want The Track System can The Labeling Request Include Custom Labeling That Allows For Each Column And Location To Be Labeled Per The Customer S Direction? (example Below) yes. Every Storage Cart To Be Configured With Label Holder Per Surgical Service Using Carboard And Plastic Inserts. Every Basket Configured With Two Dividers And A Colored Label Per Surgical Service Using Carboard And Plastic Inserts. will The Desired Room Be Empty For Installation, Or Will We Need To Work Within The Space As Shown On The Walkthrough? schedule A Meeting With The Vendor Representative, Ems Supervisor, And Logistics Poc To Coordinate Color Coding Prior To Bay Assembly And Existing Storage Removal (if Applicable) Time And Date. Vendor Will Be Responsible For Removing And Disposing Of The Current Storage Equipment describe The Logistics From The Loading Dock To The 3rd Floor Spd Room? What Is The Path And The Size Of The Elevator? Who Is Responsible For The Transportation Of The Material From The Dock To The 3rd Floor? as Stated In The Sow (requirement Description), This Will Be Addressed After Selection Is Made. Schedule A Meeting With The Vendor Representative, Ems Supervisor, And Logistics Poc To Coordinate Color Coding Prior To Bay Assembly And Existing Storage Removal (if Applicable) Time And Date. Path From Dock To The Service Elevator Is 63 Wide At Its Narrowest Point. The Service Elevator Is 53 Wide X 91 Deep. has A Space Been Allocated For The Build And Staging Of The Product Prior To Delivery To The 3rd Floor? it Has - Location For Assembly, Storage, And Staging Tbd After Selection. Schedule A Meeting With The Vendor Representative, Ems Supervisor, And Logistics Poc To Coordinate Color Coding Prior To Bay Assembly And Existing Storage Removal (if Applicable) Time And Date. can You Clarify What Types Of Products Will Be Utilized In The Below Configurations? (3) Storage Carts 33 7/8 X 23 5/8 D X 85 13/16 H With (2) 33 7/8w X 23 5/8d X 3 15/16h Baskets On Sloping Sliders (6) 33 7/8w X 23 5/8d X 3 15/16h Baskets (2) 33 7/8w X 23 5/8d X 7 3/32h Baskets On Fully Extendable Slider for Each Cart (1) Storage Cart 56 W X 27 D X 39 3/8 H As A Bench Upon Entering Room (3) 4h Baskets 7h Basket On Fully Extendable Slider response: Refer To The Sow (requirement Description) please Provide A Cad Of The Floor Plan the Current Hanel Rotomat Will Be Removed And Disposed According To Cincinnati Va Medical Center S (cvmc) Standard Operating Procedure (sop) 90-4 Turn-in Procedure. Floor Plans (below) And Dimensions Were Taken During Site Visit. please Provide A Full Inventory List if Document Is Not Included With The Attachments For This Requirement Amendment, Document Is Too Large To Include In The Amendment. If You Are Unable To View This Inventory List, And Need An Inventory List, Please Email Morgan.stein@va.gov To Obtain This Document. please Provide A Full Inventory List Of Each Type Of Sterile Pack, Including A Quantity Of Each Type Of Pack if Document Is Not Included With The Attachments For This Requirement Amendment, Document Is Too Large To Include In The Amendment. If You Are Unable To View This Inventory List, And Need An Inventory List, Please Email Morgan.stein@va.gov To Obtain This Document. please Provide Detailed Information Regarding Where And How These Are To Be Delivered, Dock Access (dimensions, Etc.) Stair / Elevator / Hallway Access / Requirements / Dimensions dock Accessible. shipping Address Is 3200 Vine Street, However, The Entrance To The Dock Is At The Rear Of The Facility And Is, Technically, Accessed Off Of E. Shields Street. our Shipping/receiving Lot Can Handle A 53 Trailer, But It Is Extremely Tight, Even When Empty.â  If Available, A Pup Trailer Or Smaller Truck Would Be Advisable. as The Owner Of A Sdvosb, I Was Wondering If This Was Originally Posted As A Sources Sought, And I Missed It? I Know That I Have Competed With Other Sdvosb On Previous Va Projects Which Would Normally Qualify This Under Sdvosb Set-aside, But I Know That I Do Not Catch 100% Of The Sources Sought Notices. sources Sought Notices Are Not A Requirement, They Are Sometimes Used During The Market Research Phase Of A Requirement. it Was Mentioned That The Shelving Products In The Main Room, C3034 Would Not Be Reused. There Was Also Shelving In Room C339, Which Was In Relatively Good Condition. Would This Shelving Be Re-used Or Disposed Of? (please See Attached Images) do Not Reuse my Last Question Is Then Based Upon My Second Question. In The Synopsis-solicitation, It States That On Page 4 That The Equipment Must "meet Infection Control Standards". We Offer A Similar Product That Has The Holes Shown In The Upright. We Then Offer A Product That Does Not Have Holes In The Uprights. I Have Been Asked On A Previous Projects Not To Quote The Units With Holes, As The Holes Leave A Location That Is Very Difficult To Clean, And Therefore Was Deemed An Infection Concern. Are These Holes An Issue In This Situation? please Refer To The Specific Tasks In Order To Comply With Standards And Guidelines, Sps Will Need Sterile Shelves To Have The Following: Of The Requirement. Sps Has Asked For Information On Items Being Proposed Decision Will Be Made At That Point. i Wanted Clarification On The Question Process . Will The Questions We Ask And Subsequent Answers We Get From The Staff Be Shared With The Vendors That Attended The Walkthrough? Will They Be Made Public For Any Vendor That Sees The Solicitation? all Questions Received With The Responses From Our End User Will Be Posted In An Amendment To The Solicitation On Sam.gov. also, Does This Solicitation Require The Removal Of The Current Hanel System Or Is It Just To Provide Shelving Once It Is Removed? the Current Hanel Rotomat Will Be Removed And Disposed According To Cincinnati Va Medical Center S (cvmc) Standard Operating Procedure (sop) 90-4 Turn-in Procedure. asking: If There Is An Elevation With These Counts Of What This Looks Like For Bid And Quoting Purposes?â  see Attached Inventory List Provided. what Is The Overall Goal For This Project? the Sterile Shelves Will Provide A Design Customized For Space To Separate Both Disposables And Reusable Medical Devices. Instituted In The Design Will Allow For A Space For Staging Case Carts To Assembly For The Next Day. Within This Design All Work Including Delivery Of New Carts, Disposal Of Old Carts, And Weekend Installation Will Be Completed By The Vendor. These Carts Have Customed Labeling And Specific Carts For Large To, Small, And Peel Pack Items. It Will Also Separate Disposable And Reusable Medical Device (rmd). are You Looking To Expand Your Instrument Sets? no do You Need Help Moving Supplies And Labeling? no. The Sow (requirement Description) States That The Vendor Is Responsible For Removal Of Any Other Existing Storage As Applicable, Site Clean Up, Disposal Of Removed Items, And Assembly/installation Of New Equipment. is The E-weight Inventory Management System Handled By Facility Or By Vendor? will Not Include E-weight System cysto -eye-gyn Section Are They Currently Manually Moving Rolling Carts To Access?  â open To Consideration Of Track Systems?â â  no Track System number Of Instrument Trays? wrapped container response: If Document Is Not Included With The Attachments For This Requirement Amendment, Document Is Too Large To Include In The Amendment. If You Are Unable To View This Inventory List, And Need An Inventory List, Please Email Morgan.stein@va.gov To Obtain This Document. number Of Peel Packs? if Document Is Not Included With The Attachments For This Requirement Amendment, Document Is Too Large To Include In The Amendment. If You Are Unable To View This Inventory List, And Need An Inventory List, Please Email Morgan.stein@va.gov To Obtain This Document.

Details: Attachment 1: Combined Synopsis-solicitation For Commercial Products And Commercial Services effective Date: 03/15/2023 revision: 01 description: this Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As An Rfq. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-05. this Solicitation Is Set-aside For 100% Service-disabled Veteran-owned Small Business (sdvosb), Iaw Vaar 819.7007 Va Veteran-owned Small Business Set-aside Procedures. Vaar Subpart 819.70, The Veterans First Contracting Program. the Associated North American Industrial Classification System (naics) Code For This Procurement Is 811210, With A Small Business Size Standard Of $34.0 Million. the Fsc/psc Is J074. the Va Southern Arizona Healthcare System (savahcs), Medical Media Building 47, Va Medical Center (vamc), Located At 3601 South 6th Avenue, Tucson, Az , Is Seeking To Purchase Preventative And Maintenance Service Contract For Two Konica Minolta Accuriopress C3080 Digital Color Press Printers, And Two Konica Minolta Accuriopress 6136 Production Printers. all Interested Companies Shall Provide Quotations For The Following: supplies/services line Item description quantity unit Of Measure unit Price total Price 0001 pmir Of Two (2) Konica Minolta Color Accuriopress C3080 Digital Press Machines. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machine To Be Fully Operational (not To Include Paper). 4 jb 0002 cost Per Copy Coverage Overage (not To Exceed 125,000 Annually For Each Konica Minolta Accuriopress C3080 Color Press Machine). 250,000 ea $0.00 $0.00 0003 pmir For Two (2) Bizhub B/w Accuriopress 6136 Digital Press Production Printers. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machine To Be Fully Operational (not To Include Paper). 4 jb 0004 cost Per Copy Overage Not To Exceed 120,000 Annually For Each Accuriopress 6136 Machine. 240,000 ea 1001 pmir For Two (2) Konica Minolta Color Accuriopress C3080 Digital Press Machines, Each Printing 37,500 Copies Per Month. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machines To Be Fully Operational (not To Include Paper). 4 jb 1002 cost Per Copy Coverage Overage (not To Exceed 125,000 Annually For Each Konica Minolta Accuriopress C3080 Color Press Machine). 250,000 ea 1003 pmir For Two (2) Bizhub B/w Accuriopress 6136 Digital Press Production Printers. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machine To Be Fully Operational (not To Include Paper). 4 jb 1004 cost Per Copy Overage Not To Exceed 120,000 Annually For Each Accuriopress 6136 Machine. 240,000 ea 2001 pmir For Two (2) Konica Minolta Color Accuriopress C3080 Digital Press Machines, Each Printing 37,500 Copies Per Month. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machines To Be Fully Operational (not To Include Paper). 4 jb 2002 cost Per Copy Coverage Overage (not To Exceed 125,000 Annually For Each Konica Minolta Accuriopress C3080 Color Press Machine). 250,000 ea 2003 pmir For Two (2) Bizhub B/w Accuriopress 6136 Digital Press Production Printers. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machine To Be Fully Operational (not To Include Paper). 4 jb 2004 cost Per Copy Overage Not To Exceed 120,000 Annually For Each Accuriopress 6136 Machine. 240,000 ea 3001 pmir For Two (2) Konica Minolta Color Accuriopress C3080 Digital Press Machines, Each Printing 37,500 Copies Per Month. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machines To Be Fully Operational (not To Include Paper). 4 jb 3002 cost Per Copy Coverage Overage (not To Exceed 125,000 Annually For Each Konica Minolta Accuriopress C3080 Color Press Machine). 250,000 ea 3003 pmir For Two (2) Bizhub B/w Accuriopress 6136 Digital Press Production Printers. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machine To Be Fully Operational (not To Include Paper). 4 jb 3004 cost Per Copy Overage Not To Exceed 120,000 Annually For Each Accuriopress 6136 Machine. 240,000 ea 4001 pmir For Two (2) Konica Minolta Color Accuriopress C3080 Digital Press Machines, Each Printing 37,500 Copies Per Month. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machines To Be Fully Operational (not To Include Paper). 4 jb 4002 cost Per Copy Coverage Overage (not To Exceed 125,000 Annually For Each Konica Minolta Accuriopress C3080 Color Press Machine). 250,000 ea 4003 pmir For Two (2) Bizhub B/w Accuriopress 6136 Digital Press Production Printers. Maintenance Includes All Consumables (toners, Waste Containers, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part Or Supplies) For The Machine To Be Fully Operational (not To Include Paper). 4 jb 4004 cost Per Copy Overage Not To Exceed 120,000 Annually For Each Accuriopress 6136 Machine. 240,000 ea statement Of Work (sow) contract Title preventative And Maintenance Service Contract For Two Konica Minolta Accuriopress C3080 Digital Color Press Printers, And Two Konica Minolta Accuriopress 6136 Production Printers. background savahcs Requires The Preventative And Maintenance Service Contract To Include Labor, Supervision, Travel, Parts, And Supplies. This Includes All Finishers Attached To The Machines And Consumable Supplies (toners, Waste Containers, Staples, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part) Which Are Required For The Machine To Be Fully Operational In Accordance With Manufacturer Specifications. This Does Not Include Paper. objective a.2.1. Provide A Preventative And Maintenance Service Contract To Include Labor, Supervision, Travel, Parts, And Supplies. This Includes All Finishers Attached To The Machines And Consumable Supplies (toners, Waste Containers, Staples, Drums, Belts, Rollers, Fusers, Sensors, And Any Other Part) Which Are Required For The Machine To Be Fully Operational In Accordance With Manufacturer Specifications. This Does Not Include Paper. a.2.2. Correspond With The Vendor Through Email Communications In Lieu Of Hard Copy Letters And Memoranda. a.2.3. Receive Invoicing Electronically, Via Email Or Other Method Of Electronic Media To Expedite The Payment Process. scope a.3.1 Savahcs Currently Has Two Konica Minolta Accuriopress C3080 Digital Color Press Production Printers Under Contract. These Machines Have 3 To 5 Finishers Attached To Them. Savahcs Also Has 2 Additional Konica Minolta Accuriopress 6136 Production Printers Black And White Production Presses Under Contract. These Machines Have 4 To 6 Finishers Attached To Them. a.3.2. All Production Printers Are/will Be Configured To The Medical Center S Lan Network And Tailored To The Needs Of Each Customer Entity. a.3.3. Vendor Guarantees To Replace All Machine(s) With A New Machine(s) (make And Model) If Less Than Two Years Old Or With An Equivalent Machine(s) (make And Model) If Over Two Years Old At No Charge To The Government If Their Technicians Are Unable To Repair The Machine(s) To Factory Specifications. If Technicians Are Unable To Repair The Machine(s) On-site, The Vendor Will Replace The Machine(s) With An Equivalent Machine (make And Model) At No Charge To The Government. period Of Performance the Period Of Performance (pop) Of This Contract Shall Consist Of One Twelve-month Base Period. At The Discretion Of The Contracting Officer (co), The Government May Exercise Up To Four, Twelve-month Option Periods. product Specifications: section B Equipment, Supplies And Services b.1. Pricing. preventative Maintenance And Service, Including Supplies Are Based On Cost Per Color Or Black & White Copy, And Accessory Configuration. Estimated Quantities And Machine Configurations Are Provided Below: b.1.2 Savahcs Primary And Secondary Konica Minolta Color Accuriopress C3080 Digital Press Machines estimated 37,500 Clicks (pages) Per Month, Per Machine. Estimated 125,000 Overages Per Year, Per Machine (10,416 Per Month Per Machine). machine 1: Mm1 a9ve012 Accuriopress C3080 7670525509 Mfp Delivery Charge - Level Four 7640018097 Basic Network Service - Bns07 7640012602 Basic Professional Services - Level 4 a782wy2 Df-706 Dual Scan Document Feeder a55cwy2 Pf-707m Paper Feed Unit a4f5wy1 Mk-732 Mount Kit For Pi-506 koni66002 Lr5402c Cust Tower Light Assembly a6h9wy2 Mk-737 Mount Kit For 3rd Party Options (qty 2) a9cewy1 Ru-518 Relay Unit With Banner Output a8frwy1 Iq-501 Intelligent Quality Optimizer a04hwy2 Pi-502 Post Inserter For Fs-532 a4f3wy5 Fs-532 100 Sheet Staple Finisher a4f4wy1 Sd-510 Saddle Stitch Unit affcwy2 Ru-510 Relay Unit 7718800 Gbc Punch G2 a9pjwy1 Video Interface Kit Vi-511 7714917 Die Coil Rnd 44/47h Hd 7714918 Die 3 Hole 8mm Hd a9g1wy2 Vi-509 Video Interface Kit a9f8wy2 Ic-314 Creo Image Controller manufacturer Part Number (mpn): A9ve012 local Stock Number: Accuriopress C4080 machine 2: Mm2 a9ve012 Accuriopress C3080 7670525509 Mfp Delivery Charge - Level Four 7640018097 Basic Network Service - Bns07 7640012602 Basic Professional Services - Level 4 a782wy2 Df-706 Dual Scan Document Feeder a55cwy2 Pf-707m Paper Feed Unit a9cewy1 Ru-518 Relay Unit With Banner Output a8frwy1 Iq-501 Intelligent Quality Optimizer a4f3wy5 Fs-532 100 Sheet Staple Finisher a0h0w12 Fd-503 Multi Folding Unit a0h2wy3 Sd-506 Saddle Stitch Unit a9pjwy1 Video Interface Kit Vi-511 a9g1wy1 Video Interface Kit Vi-511 a9f8wy2 Ic-314 Creo Image Controller b.1.3. Konica Minolta Bizhub B/w Accuriopress 6136 Digital Press Production Printers (machines 1 And 2). Estimated 125,000 Clicks Per Month, Per Machine. Estimated 120,000 overages Per Year, Per Machine. machine 1: Big Bear serial Number Description: A4eu012000025 Konica Minolta Bizhub B/w Accuriopress 6136 Digital Press Production Printers a9jt012 Accuriopress 6136 7670525510 Mfp Delivery Charge - Level Five 7640018097 Basic Network Service - Bns07 7640012599 Basic Professional Services Level 3 a9jxwy1 Pf-710 Paper Feed Unit a8frwy1 Iq-501 Intelligent Quality Optimizer aaanwy1 Video Interface Kit Vi-512 (qty 2) a04hwy2 Pi-502 Post Inserter For Fs-532 a9cewy1 Ru-518 Relay Unit With Banner Output a4f3wy5 Fs-532 100 Sheet Staple Finisher a4f4wy1 Sd-510 Saddle Stitch Unit a4f5wy1 Mk-732 Mount Kit For Pi-506 a6h9wy2 Mk-737 Mount Kit For 3rd Party Options (qty 2) a4fcwy2 Ru-510 Relay Unit 7718800 Gbc Punch G2 7714917 Die Coil Rnd 44/47h Hd 7714918 Die 3 Hole 8mm Hd 01001863a Ic-309m2 Creo Image Controller koni66002bw Lr5402bw Cust Tower Light Assemb W/adptr machine 2: Little Bear serial Number Description: A4eu012000026 Konica Minolta Bizhub B/w Accuriopress 6136 Digital Press Production Printers a9jt012 Accuriopress 6136 a9jxwy1 Pf-710 Paper Feed Unit a8frwy1 Iq-501 Intelligent Quality Optimizer aaanwy1 Video Interface Kit Vi-512 (qty 2) a0h0w12 Fd-503 Multi Folding Unit a0h2wy3 Sd-506 Saddle Stitch Unit a9cewy1 Ru-518 Relay Unit With Banner Output a4f3wy5 Fs-532 100 Sheet Staple Finisher a4fcwy2 Ru-510 Relay Unit 01001863a Ic-309m2 Creo Image Controller koni66002bw Lr5402bw Cust Tower Light Assemb W/adptr b.2. Special Instructions. b.2.1. Vendor Must Provide Detailed Information On Products, Services, And Guarantees Offered To The Government. b.2.2. Vendor Will Describe Their Internal Quality Control Process Used For Ensuring Compliance With Contract Terms And Conditions, Government Defined Response Times, And Machine Performance Specifications. b.2.3. Vendor Will Provide Certification That All Technical Personnel Performing Work Have Received Certified Factory Training From The Oem. In Addition, Vendor Will Describe The Organization Structure, And Business Processes Used For The Government To Obtain Technical Support, Maintenance, And Repair Services, And Resolve Problems. section C Descriptions And Specifications c.1. General Requirements Applicable To All Equipment c.1.1 Consumable Supplies c.1.2. Orders For Consumable Supplies Shall State The Location And Serial Number Of The machine For Which The Additional Supplies Are Being Ordered. c.1.3. The Vendor Must Deliver Consumable Supplies Within A Period Of Seventy-two Hours After receipt Of Order. c.1.4. Supplies From The Vendor Shall Be Delivered Between 7:30 A.m. And 4:00 P.m., Monday Through Friday (excluding Federal Holidays) Directly To The Production Printer Location. c.1.5. The Vendor Will Furnish One Designated Point Of Contact For Coordination Of Supplies, delivery, And Or Maintenance. c.2. Parts/supplies Availability c.2.1. The Vendor Shall Maintain An Inventory Of Original Equipment Manufacturer (oem) Parts And Consumable Supplies In Quantities Sufficient To Service The Resulting Contract. The Vendor Must Have An Inventory And Delivery System For Oem Parts And Consumable Supplies. c.3. Maintenance And Services c.3.1. Response To Service Calls: The Vendor Will Respond To Service Calls During Normal Working Hours, Monday Through Friday, Excluding Holidays Observed By The Federal Government. The Vendor Must Respond To Verbal Service Calls Within Four (4) Working Hours After Notification Of Malfunction. The Response Time On A Service Call Starts When The Authorized Personnel Place A Service Call To The Vendor. The Service Technician Will Report To The Agency/activity Requesting Service And Notify Them Of His/her Arrival And Verify The Problem For Which The Service Call Was Made. After The Call Is Completed, The Service Technician Will Contact The Service Requester, Key Operator, Or Any Government Employee Within The Office, Whether Or Not Service Is Completed. c.3.2. The Vendor Must Provide A Toll-free Telephone Number For Service Calls Which Must Be Answered During At Least Eight Working Hours, Between 7:30 Am And 4:00 Pm, Monday Through Friday, And Manned In Such A Way That The Caller Will Not Be "on Hold For More Than Three Minutes In The Process Of Reporting A Service Requirement. c.4. Technical Maintenance Support c.4.1. The Vendor Must Have Sufficient Management And Qualified Dedicated Technicians To Service The Printers. The Vendor Must Have A Crew Of Qualified And Trained Service And Delivery Personnel In Sufficient Numbers To Service And Support The Requirements Under Contract Within The Specified Response Times. c.5. Personnel Qualifications c.5.1. The Vendor Is Expected To Maintain A Crew Of Original Equipment Manufacturer (oem) Certified Technicians, Plus Delivery And Management Personnel In Sufficient Numbers To Support The Scope Of The Contract Actively And Efficiently During The Period Of Performance. The Vendor Must Designate A Project Manager Who Will Be Empowered To Make Daily Decisions To Ensure That Contract Implementation And Day-to-day Operation Is As Smooth As Possible. Additionally, The Vendor Must Have Prior And Similar Work Experience In Supporting A Copier Program That Demonstrates The Company S Ability To Service This Type Of Contract. This Can Include Similar Commercial Experiences Of This Nature. c.6. Security c.6.1. The C&a Requirements Do Not Apply, And That A Security Accreditation Package Is Not Required. c.6.2. Access To Classified Information Is Not A Requirement Of The Contract. However, Due To The Sensitive Nature Of Equipment And Data Present In Particular Areas, The Vendor May Be Obligated To Obtain And Maintain Special Badges For All Personnel Associated With The Contract. As A Minimum, Such Conformance May Require All On-site Personnel To Be Subjected To The Following: (1) Verification Of U.s. Citizenship, (2) Completion Of Personal Information Sheet, (3) Interview, (4) Local Record Checks (available Personnel, Base Or Military Police, Medical And Security Records) Conducted, (5) Local Public Agency Inquiry, And (6) National Agency Check (nac) To Determine Trustworthiness. Escort Will Be Provided As Required In Sensitive Work Areas. c.7. Reimbursement For Unacceptable Copies c.7.1. Production Printers Have Certain Performance Characteristics, I.e., Paper Jams, Malfunctions That Cause Unacceptable Copy Quality, Etc. These Factors Are Not In The Control Of The Copiers Operator But Can Become A Noticeable Expense. When Such Problems Become Evident During The Course Of The Resultant Contract, The Operator Shall Notify The Vendor Regarding The Situation. The Vendor Is Required To Respond Within The Time Specified For Service Calls. Copies That Are Unacceptable Shall Be Deducted From Each Machine's Monthly Copy Count For Payment. This Provision Is Not Intended To Cover Defects In Copy Quality When They Are The Result Of Operator Errors (incorrect Paper Selection, Operation Of Machine With Insufficient Toner, Etc.). Note: All Copies Produced In The Course Of Maintenance And/or Repair Work Shall Be Considered As Unusable Copies And Shall Not Be Billed To The-government. c.8. Contractor Reports c.8.1. Monthly Reports. The Vendor Shall Maintain A Record Identifying All Services Rendered Under This Contract. This Record Shall Be Provided To The Cor By The 20th Day Of The Following Month That Service Was Received, And Shall Include Agency Name, Location, Equipment Location, Make, Model, And Serial Number Of Machine; Record Of Performed Maintenance And Repair; Monthly Volume Of Copies Produced By Machine; Total Billing For All Copying/duplicating Services Provided Under This Contract During The Period. Prior To The Issuance Of An Invoice, The Monthly Report Will Be Forwarded To The Cor In Digital Form. The Digital Form May Or May Not Include The Record Of Performed Maintenance And Repair. c.8.1. Semi-annual Reports. The Vendor Shall Provide A Semi-annual Usage Report To The cor For Each Location By Machine. At This Time, The Contractor May Opt To Suggest Any Changes Of Copier Volume Due To Over Usage Or Under Usage. c.8.2. Maintenance Reports. The Vendor Will Complete A Maintenance Report Upon The Completion Of Each Maintenance Service/repair Call. Report Will Include Time Or Arrival On-site; Date And Time Of Service Completed; And A Description Of Service(s) Rendered. A Copy Of The Reports Will Be Forwarded To The Cor. c.9. Service Outside The Scope Of The Contract c.9.1. The Vendor May Perform Only Services Covered In The Scope Of The Task Order. Any Requests For Services Outside Of The Terms And Conditions Of The Task Order Are Not Authorized For Action By The Vendor. performance Monitoring: There Will Be A Designated Federal Employee Assigned By The Cor To Ensure That All Equipment Is Installed And Functioning Correctly. place Of Performance At The Savahcs: southern Arizona Va Health Care System (savahcs) medical Media Building 47 3601 South 6th Ave. tucson Arizona 85723 travel: The Government Anticipates Travel Under This Effort To Perform The Tasks Associated With This Contract. Contractor Shall Include All Estimated Travel Costs In Their Firm-fixed Price Line Items. These Costs Will Not Be Directly Reimbursed By The Government. changes To Statement Of Work: Any Changes To This Sow Shall Be Authorized And Approved Only Through Written Correspondence From The Co. Costs Incurred By The Contractor Through The Actions Of Parties Other Than The Co Shall Be Borne By The Contractor. security Requirements: N/a risk Control: If Services And Products Do Not Conform To Contract Requirements, The Government May Require The Contractor To Perform The Services Again In Conformity With Contract Requirements, At No Additional Cost To The Government, If Appropriate. work Hours normal Hours Of Operation Are Monday Through Friday From 8:00 Am To 4:30 Pm Pacific Time. All Work Is Expected To Be Performed Generally During Normal Hours Of Coverage Unless Requested Or Approved By The Cor Or His/her Designee. before Commencement Of Work, The Contractor Shall Confer With The Va Cor And Contracting Office To Agree On A Sequence Of Procedures; Means Of Access To Premises And Building. All Work Performed, To Include Delivery Of Materials And Equipment, Shall Be Made With Minimal Interference To Government Operations And Personnel. work Performed Outside The Normal Hours Of Coverage Must Be Approved By The Cor Or His/her Designee. all Time Shall Be Approved In Advance By The Contracting Officer S Representative (cor). Allow 5-days For Approval Of Any Alternate Working Hours Needed. federal Holidays new Year S Day january 01 martin Luther King S Birthday third Monday In January president S Day third Monday In February memorial Day last Monday In May juneteenth june 19 independence Day july 04 labor Day first Monday In September columbus Day second Monday In October veterans Day november 11 thanksgiving Day fourth Thursday In November christmas Day december 25 if The Holiday Falls On A Sunday, The Following Monday Will Be Observed As A National Holiday. When A Holiday Falls On A Saturday, The Preceding Friday Is Observed As A National Holiday By U.s. Government Agencies, And Any Day Specifically Declared By The President Of The United States Of America. identification, Check-in, Parking, And Smoking Regulations identification the Vendor's Employees Shall Wear Visible Identification At All Times While On Vallhcs Premises. Contractor Employees Shall Report To Va Police Upon Entry To The Vallhcs Facility To Get A Visitor Badge. Contractor Employees Are Required To Be Escorted By The Cor Or Designee S Office Once On Campus Prior To Commencement Of Work. During Emergencies Contractor Personnel Shall Check In With Vallhcs Police If The Vallhcs Cor Or Designee Is Not Available. all Contract Personnel Attending Meetings, Answering Government Telephones, And Working In Other Situations Where Their Contractor Status Is Not Obvious To Third Parties Are Required To Identify Themselves As Such To Avoid Creating An Impression In The Minds Of Members Of The Public That They Are Government Officials. They Must Also Ensure That All Documents Or Reports Produced By Contractors Are Suitably Marked As Contractor Products Or That Contractor Participation Is Appropriately Disclosed. parking it Is The Responsibility Of The Contract Personnel To Park In The Appropriate Designated Parking Areas. Parking Information Is Available From Va Police & Security Service Office. The Contractor Assumes Full Responsibility For Any Parking Violations. smoking veterans Health Administration (vha) Directive 1085, Dated March 5, 2019, Provides A Comprehensive Smoke-free Policy For Patients, Visitors, Contractors, Volunteers, And Vendors, At The Department Of Veterans Affairs (va), Veterans Health Administration (vha) Health Care Facilities. This Updated Vha Directive Implements A Smoke-free Policy For Patients, Visitors, Contractors, Volunteers, And Vendors At Va Health Care Facilities, As Defined In This Directive, Based On Scientific Evidence Regarding The Adverse Health Effects Of Secondhand And Thirdhand Smoke Exposures. the Assistant Deputy Under Secretary For Health For Administrative Operations (10na) And The Assistant Deputy Under Secretary For Health For Clinical Operations (10nc) Are Responsible For The Contents Of This Directive. Questions May Be Referred To Vha Smoke Free: Vhasmokefree@va.gov. this Vha Directive Is Scheduled For Recertification On Or Before The Last Working Day Of March 2024. This Vha Directive Will Continue To Serve As National Vha Policy Until It Is Recertified Or Rescinded. weapons And Contraband possession Of Weapons Or Contraband Is Prohibited And Shall Be Subject To Arrest And Termination From Future Performance Under This Contract. Enclosed Containers, Including Tool Kits, Shall Be Subject To Search. Violations Of Vallhcs Regulations May Result In Citation Answerable In The United States (federal) District Court, Not A Local District, State, Or Municipal Court. safety all Personnel Employed By The Contractor In The Performance Of This Contract, Or Any Representative Of The Contractor Entering On Vallhcs Shall Comply With Applicable Federal, State, And Va Safety And Fire Regulations And Codes, Which Are In Effect During The Performance Period Of The Contract. contractor Shall Perform Work In Strict Accordance With Existing Relevant, Accredited Standards And Codes To Minimize The Possibility Of Injury To Personnel, Or Damage To Government Equipment. Every Effort Shall Be Made To Safeguard Human Life And Property. contractor Shall Comply With All Applicable Federal, State, And Local Requirements Regarding Workers Health And Safety. The Requirements Include, But Are Not Limited To, Those Found In Federal And State Occupational Safety And Health Act (osha) Statutes And Regulations, Such As Applicable Provisions Of Title 29, Code Of Federal Regulations (cfr), Parts 1910 And 1926, Nfpa 70e, Article 130.7 29 Cfr 1910.132(d)(1)(iii), 29cfr1910.137. contractor Shall Provide All Necessary Tools, And Personal Protective Equipment (ppe) To Perform The Work Safely, Effectively, And Timely. contractor Personnel contractor S Program Manager the Contractor Shall Provide A Contract Program Manager Who Shall Be Responsible For The Performance Of The Work. The Name Of This Person Shall Be Designated In Writing To The Contracting Officer. The Contractor S Program Manager Shall Have Full Authority To Act For The Contractor On All Contract Matters Relating To Daily Operation Of This Contract. contractor S Employees the Contractor Shall Not Employ Persons For Work On This Contract If Such Employee Is Identified To The Contractor As A Potential Threat To The Health, Safety, Security, General Well-being Or Operational Mission Of The Installation And Its Population. contract Personnel Shall Be Subject To The Same Quality Assurance Standards Or Exceed Current Recognized National Standards As Established By The Joint Commission (jc). contractor Qualifications & Other Responsibilities contractor Shall Obtain All Necessary Licenses Required To Perform This Work. Contractor Shall Take All Precautions Necessary To Protect Persons And Property From Injury Or Damage During The Performance Of This Contract. Contractor Shall Be Responsible For Any Injury To Himself/herself, His/her Employees, Or Others, As Well As For Any Damage To Personal Or Public Property That Occurs During The Performance Of This Contract That Is Caused By Him/her Or His/her Employees Fault Or Negligence. Contractor Shall Maintain Personal Liability And Property Damage Insurance Prescribed By The Laws Of The Federal Government. the Government Reserves The Right To Accept Or Reject Contractor S Employee For The Rendering Of Services. Complaints Concerning Contract Personnel S Performance Or Conduct Will Be Dealt With By The Contractor And Cor With The Final Decision Being Made By The Contracting Officer. insurance Coverage the Contractor Agrees To Procure And Maintain, While The Contract Is In Effect, Workers Compensation And Employee S Public Liability Insurance In Accordance With Federal And State Of California Laws. The Contractor Shall Be Responsible For All Damage To Property, Which May Be Done By Him, Or Any Employee Engaged In The Performance Of This Contract. the Government Shall Be Held Harmless Against Any Or All Loss, Cost, Damage, Claim Expense Or Liability Whatsoever, Because Of Accident Or Injury To Persons Or Property Of Others Occurring In The Performance Of This Contract. before Commencing Work Under This Contract, The Contracting Officer Shall Require The Contractor To Furnish Certification From His/her Insurance Company Indicating That The Coverage Specified By Far 52.228-5 And Per Far Subpart 28.307-2 Has Been Obtained And That It May Not Be Changed Or Canceled Without Guaranteed Thirty (30) Day Notice To The Contracting Officer. contractor Is Required To Provide Copies Of Proof Of Workers Compensation And Employee Public Liability Insurance Within Fifteen (15) Calendar Days After Notification Of Contract Award. invoicing And Payment overtime & Holiday Pay any Overtime And/or Holiday Pay That May Be Entitled To The Contractor S Employees Shall Be The Sole Responsibility Of The Contractor And Shall Not Be Billed To Nor Reimbursed By The Government. contractor Will Bill And Be Paid For Actual Services Provided By Contractor Personnel. Contractor Will Not Be Paid For Availability Or On-call Services Unless Otherwise Provided Herein. invoices payment Of Services Rendered Under This Contract Shall Be Made In Arrears Upon Satisfactory Completion Of Each Service And Receipt Of A Properly Prepared Invoice And Submitted By The Contractor To The Payment Address Specified By Contracting. Invoices Shall Reference The Contract Number And Purchase Order Number, Manifest Number(s), Provide A Complete And Accurate Description Of Services/ Supplies Delivered/ Rendered, Including Dates Of Performance, Amounts, Unit Prices, Extended Totals And Any Other Data Relevant For Payment Purposes. the Government Shall Not Authorize Payment Until Such Time That The Vallhcs Cor All Properly Executed And Signed Documentation. no Advance Payments Shall Be Authorized. Payment Shall Be Made On A Monthly Arrears For Services Provided During The Billing Month In Arrears In Accordance With Far 52.212-4, Para. (i). Upon Submission Of A Properly Prepared Invoice For Prices Stipulated In This Contract For Services Delivered And Accepted In Accordance With The Terms And Conditions Of The Contract, Less Any Deductions Stipulated In This Contract. payment Of Invoices May Be Delayed If The Appropriate Invoices As Specified In The Contract Are Not Completed And Submitted As Required. the Purchase Order Period Of Performance Is 10/01/2024 - 09/39/2029, With An Fob Of Destination. place Of Performance/place Of Delivery address: department Of Veterans Affairs southern Arizona Healthcare System (savahcs) va Medical Center (vamc) 3601 South 6th Street tucson, Az 85723 postal Code: 85723-1000 country: united States the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services addendum To Far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services far 52.252-1, Solicitation Provisions Incorporated By Reference (feb 1998) far 52.204-7, System For Award Management (oct 2018) far 52.204-16, Commercial And Government Entity Code Reporting (aug 2020) far 52.217-5, Evaluation Of Options (jul 1990) vaar 852.239-75, Information And Communication Technology Accessibility Notice (feb 2023) far 52.204-29, Federal Acquisition Supply Chain Security Act Orders Representation And Disclosures (dec 2023) far 52.212-2, Evaluation Commercial Products And Commercial Services (nov 2021) far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services (may 2024) offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services (nov 2023) addendum To Far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services Applies To And Is Included With This Acquisition. far 52.252-2, Clauses Incorporated By Reference (feb 1998) far 52.203-17, Contractor Employee Whistleblower Rights (nov 2023) far 52.204-9, Personal Identity Verification Of Contractor Personnel (jan 2011) far 52.204-13, System For Award Management Maintenance (oct 2018) far 52.204-18, Commercial And Government Entity Code Maintenance (aug 2020) vaar 852.203-70, Commercial Advertising (may 2018) vaar 852.204-70, Personal Identity Verification Of Contractor Personnel (may 2020) far 52.217-8, Option To Extend Services (nov 1999) far 52.217-9, Option To Extend The Term Of The Contract (mar 2000) vaar 852.219-73, Va Notice Of Total Set-aside For Certified Service-disabled Veteran-owned Small Businesses (jan 2023) vaar 852.219-75, Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction (jan2023)(deviation) vaar 852.232-72, Electronic Submission Of Payment Requests (nov 2018) vaar 852.242-71, Administrative Contracting Officer (oct 2020) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products And Commercial Services (may 2024) the Following Subparagraphs Of Far 52.212-5 Are Applicable: Subparagraph (b)(5), (9), (11), (12), (25), (26), (31), (33), (34), (36), (39), (46), (51), (55), (59), (c)(1), (7), And (8). all Invoices From The Contractor Shall Be Submitted Electronically In Accordance With Vaar Clause 852.232-72, Electronic Submission Of Payment Requests. This Is Accomplished Through The Tungsten Network, Located At: Http://www.fsc.va.gov/einvoice.asp. This Is Mandatory And The Sole Method For Submitting Invoices. all Quoters Shall Submit The Following: All Information Required By Far 52.212-1(b) Submission Of Offers. all Quotes Shall Be Sent To The Network Contracting Office (nco), At Marie.conforto@va.gov. award Will Be Based Upon A Comparative Evaluation Of Quotes In Accordance With The Simplified Acquisition Procedures Of Far 13. Comparative Evaluation Is The Side By Side Pairwise Comparison Of Quotes Based On Factors Resulting In A Contracting Officer Decision For The Quote Most Favorable To The Government. options Will Be Evaluated At Time Of Award. the Following Are The Decision Factors: Price, And Past Performance, With Price More Important. past Performance Will Be Based On Cpars And Fapiis Ratings. No Rating In Cpars Is Equal To A Neutral Rating. the Award Will Be Made To The Response Most Advantageous To The Government. responses Should Contain Your Best Terms, Conditions. to Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" Quoters Shall List Exception(s) And Rationale For The Exception(s), If Any. submission Of Questions Shall Be Received No Later Than Wednesday, 09/18/2024, 16:00 Mdt Rfq 36c26224q1397. submissions Shall Include Your Quote, Using The Attached Schedule, As Well As A Capabilities Statement With Qualifications Proving All Certifications And Education Required For The Work Being Conducted In The Sow. Submissions Not Meeting All Requirements Of The Sow Will Be Considered Ineligible For Award . submission Of Your Response Shall Be Received Not Later Than Wednesday, 09/18/2024, 16:00 Mdt At Marie.conforto@va.gov Only. Subject Line Shall Include Response To Rfq 36c26224q1397 . late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). any Questions Or Concerns Regarding This Solicitation Should Be Forwarded In Writing Via E-mail To The Point Of Contact Listed Below. point Of Contact marie Conforto contract Specialist marie.conforto@va.gov

Tender Id: PPEA-58173 | Destination Stafford Ppea - Rfp #24114

Details: Description Republic Of The Philippines City Of San Pedro Province Of Laguna City Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Pr No. 2024-09-0917 1. The City Government Of San Pedro, Laguna Through The 2024 Budget Approved By The Sangguniang Panlungsod Intends To Apply The Sum Of Php 50,000,000.00 Being The Approved Budget Contract (abc) To Payments Under The Contract For Establishment Of Cdrrm Building - Operations Center Phase Ii. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of San Pedro, Laguna Now Invites Bids For The Following: Quantity Unit Item Description Establishment Of Cdrrm Building - Operations Center Phase Ii 2 Sets Power Over Ethernet Network Switch • Interface: - 24 X 10/100/1000 Base-t Ports - 4 X 1g/10g Sfp+ Ports Poe Standards: Ieee 802.3af And 802.3at •packet Forwarding Rate: 96 Mpps •switching Capacity: 128 Gbps •mac Address Table Size: 32,000 •cpu: Dual Cores, With The Clock Speed Of 1.2 Ghz •flash Memory: 512 Mb Sdram: 1 Gb 18 Sets Omni Directional Acces Point •wireless Protocol: - 802.11ax •throughput: - 1775mbps •certifications: - Ce - Rohs 1 Set 42u Data Cabinet 1 Set 4u Data Cabinet 10 Sets Flood Monitoring Camera • Image Sensor: 1/1.8" Cmos • Pixel: 8 Mp • Max. Resolution: 3840 (h) × 2160 (v) • Rom: 4 Gb • Ram: 1 Gb • Electronic Shutter Speed: 1/1 S–1/300,000 S • Scanning System: Progressive · Min. Illumination: Color: 0.005 Lux@f1.4; B/w: 0.0005 Lux@f1.4 • 0 Lux (ir On) Illumination Distance 250 M (820.21 Ft) (ir) • Illuminator On/off Control: Zoom Prio; Manual; Off • Illuminator Number: 10 (ir) • Wiper: Smart Wiper • Focal Length: 5.5 Mm–220 Mm • Max. Aperture: F1.4–f4.5 • Field Of View: H: 63.9°–2.0°; V: 37.3°–1.1°; D: 71.2°–2.3° • Optical Zoom: 40× • Focus Control: Auto; Semi-auto; Manual • Close Focus Distance: 1.5 M–8 M (4.92 Ft–26.25 Ft) • Iris Control: Auto Pan/tilt Range Pan: 0° To 360° Endless; • Hydrological Monitoring: Recognizes Standard And Virtual Water Level Markers. Triggers An Alarm When The Water Level Exceeds Any Of The Limits. It Also Detects Floating Debris And Boats And Sends Push Notifications With Data On The Water Level. • Video Compression: H.265; Smart H.265+; Smart H.264+; H.264; Mjpeg • Streaming Capability: 3 Streams • Video Frame Rate: Mainstream: 4k/4m/3m/1080p/1.3m/720p (1–25/30fps); Sub Stream 1: D1/cif (1–25/30 Fps); Sub Stream 2: 1080p/1.3m/720p/cif (1–25/30 Fps) • Bit Rate Control: Cbr; Vbr • Support Blc, Hlc, Wdr, Motion Detection, Region Of Interest • Digital Zoom 16x • Audio Compression G.711a; G.711mu; G726; Mpeg2-layer2; G722.1; G729; G723; Pcm • Alarm I/o: 7/2 • Power Supply: 36 Vdc, 2.23 A (± 25%); Hi-poe • Operating Temperature: –40 °c To +70 °c (–40 °f To +158 °f) Protection: Ip67; Tvs 8000 V Lightning Proof; Surge Protection; Voltage Transient Protection 10 Sets Pole Mount Bracket(for Flood Monitoring Camera) 10 Sets Facial Recognition Camera • Image Sensor: 1/1.8" Cmos • Max. Resolution: 3840 (h) × 2160 (v) • Rom: 8 Gb • Ram: 4 Gb • Scanning System: Progressive • Electronic Shutter Speed: Auto/manual 1/3 S–1/100,000 S • Min. Illumination: 0.0007 Lux@f1.6 (color, 30 Ire), 0.0004 Lux@f1.6 (b/w, 30 Ire), 0 Lux (illuminator On) • S/n Ratio: >56db • Illumination Distance: Up To 120 M (393.70 Ft) (ir Led) • Illuminator On/off Control: Auto • Illuminator Number: 4 (ir Led) • Angle Adjustment: Pan: 0-360°, Tilt: 0-90°, Rotation: 0-360° • Lens Type: Motorized Vari-focal • Lens Mount: Module • Focal Length: 8 Mm–32 Mm • Max. Aperture: F1.6 • Field Of View: H: 43°–15°; V: 23°–9°; D: 48°–17° • Iris Control: Auto • Iris Control Type: P-iris • Support Perimeter Protection, Face Detection, Face Recognition, People Counting, Heat Map, Anpr, Parking Space Management (manage Outdoor And Planned Parking Lots; Manage Parking Spaces In Multiple Areas; Display The Total Number Of Parking Spaces And Parking Spaces That Are Available) • Ppe Detection: Triggers Alarms When The Detected Object Matches Or Does Not Match All Of The Configured Attributes (workwear, Hat, Facemask, Apron, Gloves, Shoe Covers, Boots, Seatbelt, Safety Vest); Privacy Protection • Video Metadata: Motor Vehicle, Non-motor Vehicle, Face, And Human Body Detection; Snapshot; Snapshot Optimization; Optimal Face Snapshot Upload. • Motor Vehicle Attributes: License Plate, Vehicle Type, Vehicle Color, Vehicle Logo, Seatbelt, Smoking, And Calling. Generates Flow Statistics For People, Motor Vehicles And Non-motor Vehicles Based On The Direction, And Exports Reports. • Non-motor Vehicle Attributes: Type, Vehicle Color, Number Of People, Top Type And Color, And Hat. • Human Body Attributes: Top And Bottom Type And Color, Bag, Hat, Gender And Umbrella. Privacy Protection. • Video Compression: H.265; H.264; H.264h; H.264b; Mjpeg • Smart Codec: Smart H.265+; Smart H.264+ • Video Frame Rate: • Default: Main Stream: 3840 × 2160@(1–25/30 Fps), Sub Stream: 1920 × 1080@(1–25/30 Fps); Third Stream: 1920 × 1080@(1–25/30 Fps); Fourth Stream: 1920 × 1080@(1–25/30 Fps); Fifth Stream: 704 × 576@(1–25 Fps)/704 × 480@(1–30 Fps) • High Frame Rate: Main Stream: 3840 × 2160@(1–50/60 Fps), Sub Stream: 1920 × 1080@(1–25/30 Fps) • Stream Capability: 5 Streams Resolution: 8m (3840 × 2160); 6m (3072 × 2048); 5m (3072 × 1728); 5m (2592 × 1944); 4m (2688 × • 1520); 3m (2048 × 1536); 3m (2304 × 1296) 1080p (1920 × 1080); 1.3m (1280 × 960); 720p (1280 × 720); D1 (704 × 576/704 × 480); Cif (352 × 288/352 × 240) • Support 3d Nr, Blc, Hlc, Wdr (at Least 120db), Smart Illumination, Defog • Cyber Security: Configuration Encryption; Trusted Execution; Digest; Security Logs; Wsse; Account Lockout; Syslog; Video Encryption; 802.1x; Ip/mac Filtering; Https; Trusted Upgrade; Trusted Boot; Firmware Encryption; Generation And Importing Of X.509 Certification • Operating Temperature –40 °c To +65 °c • Protection Ip67; Ik10; • Power Supply 12 Vdc/24 Vac/poe+ (802.3at)/epoe Alarm Input/output: At Least 3 Channels/ At Least 2 Channels 10 Sets Pole Mount Bracket(for Facial Recognition Camera) 13 Sets License Plate Recognition Camera • Image Sensor: 1.1" Gs-cmos • Shutter Mode: Single Shutter; Double Shutters; Three Shutters • Electronic Shutter Speed: Auto/manual 1/50 S–1/100,000 S • Noise Reduction: 3d Nr • S/n Ratio: 48 Db • Wdr: 120 Db • Min. Illumination: 0.001 Lux • Day/night: Icr Auto Switch: Uses Ir Cut-off Filter (ircf) With Polarizer In The Daytime, And Uses Ordinary Filter At Night. • Illuminator Number: 8 • Ir Light: Yes • Illumination Distance: 23 M-30m (75.46 Ft–98.43 Ft) (brightness Adjustable) • Lane Coverage: Center Mount: 4 Lanes; Side Mount: 3 Lanes • Lens Type Motorized: Vari-focal • Focal Length: 16 Mm–40 Mm • Max. Aperture: F1.4 • Iris Type: P-iris • Field Of View: Horizontal: 22.3°–53.0°; Vertical: 13.8°–32.3°; Diagonal: 26.0°–61.9° • Trigger Mode: Video Trigger/radar Trigger • Speed Detection Range: 0 Km/h–300 Km/h • Osd Overlay: Time; Address; Lane No.; Plate; Plate Color; And More Support Target Detection (motor Vehicle; Motorcycle), Face Detection, Anpr, Vehicle Type Recognition(vehicle Head: Suv, Large Bus, Sedan,light Truck, Pickup, Heavy Truck, Medium Truck, Van, Medium Bus, Mpv Vehicle Tail: Suv, Large Bus, Sedan, Light Truck, Pickup, Heavy Truck, Medium Truck, Van) • Accuracy (under Recommended Installation And Lighting Conditions): Capture Rate > 99%; Lpr Accuracy > 98% • Vehicle Color Recognition: White, Pink, Black, Red, Yellow, Gray, Blue, Green, Dark Orange, Purple, Brown, And Silver, Gray (color Recognition Is Not Supported During The Nighttime) • Vehicle Brand/logo Recognition: • Vehicle Head Mode: Acura, Alfa Romeo, Ashok Leyland, Aston Martin, Audi, Baic, Bently, Benz, Bmw, Buick, Byd, Cadillac, Chery, Chevrolet, Chrysler, Citroen, Dacia, Daihatsu, Datsun, Dodge, Ds, Ferrari, Fiat, Force, Ford, Foton, Geely, Gmc, Great Wall, Hino, Honda, Hyundai, Infiniti, Isuzu, Iveco, Jac, Jaguar, Jeep, Kia, King Long, Land, Lexus, Lifan, Lincoln, Mahindra, Man, Maserati, Mazda, Mercury, Mg, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rolls Royce, Saab, Scania, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Tesla, Toyota, Ud, Volkswagen, Volvo • Traffic Flow Detection Generates Statistics On Vehicle Flow, Queue Length, Average Speed, Lane Occupancy, And More Traffic Event Motor Vehicle Illegal Stopping On The Roadway, Traffic Congestion • Video Compression: H.265; H.264m; H.264h; Mjpeg • Video Resolution: 4096 (h) × 2336 (v) • Video Frame Rate: • 50 Hz: Maximum 50 Fps; Default Mainstream (4096 × 2336@25 Fps), Sub Stream (1600 × 1200@25 Fps) • 60 Hz: Maximum 30 Fps; Default Mainstream (4096 × 2336@15 Fps), Sub Stream (1600 × 1200@15 Fps) • Video Bit Rate: H.264: 32 Kbps–32767 Kbps; H.265: 32 Kbps–32767 Kbps; Mjpeg: 512 Kbps–32767 Kbps • Bit Rate Control: Cbr/vbr • Support Blc, Hlc, Edge Enhancement, Bad Pixel Correction • Composite Image: Supports Combining Up To 4 Images Into A Composite Image • Security Authorized Username And Password, Mac Address Binding, Https Encryption, And Network Access Control • Positioning: Gps • Network Status Monitoring: Ntp; Gps • Alarm Input/output: At Least 4 Channels /2 Channels • Operating Temperature: –40 °c To +65 °c (–40 °f To +149 °f) • Power Supply: 100–240 Vac (50 Hz/60 Hz) 13 Sets 3-dimensional Universal Mounting Bracket 34 Sets Bullet Ip Camera • Image Sensor: 1/2.9" Cmos • Max. Resolution: 2688 (h) × 1520 (v) • Rom: 128 Mb • Ram: 128 Mb • Scanning System: Progressive • Electronic Shutter Speed: Auto/manual 1/3 S–1/100,000 S • Min. Illumination: 0.006 Lux@f1.6 (color, 30 Ire), 0.0006 Lux@f1.6 (b/w, 30 Ire), 0 Lux (illuminator On) • S/n Ratio: >56 Db • Illumination Distance: Up To 80 M (262.47 Ft) (ir Led) • Illuminator On/off Control: Auto; Manual • Illuminator Number: 4 (ir Led) • Pan/tilt/rotation Range: Pan: 0°–360°, Tilt: 0°–90°, Rotation: 0°–360° • Lens Type: Fixed-focal • Lens Mount: M12 • Focal Length: 8 Mm; 6 Mm; 3.6 Mm • Max. Aperture: F1.6 • Field Of View: 3.6 Mm: H: 84°; V: 42°; D: 101°; 6 Mm: H: 52°; V: 28°; D: 61°; 8 Mm: H: 40°; V: 23°; D: 46° • Iris Control: Fixed • Close Focus Distance: 3.6 Mm: 1.7 M (5.58 Ft), 6 Mm: 3.2 M (10.50 Ft); 8 Mm: 4.6 M (15.09 Ft) • Support Perimeter Protection (intrusion, Tripwire), Blc. Hlc, Wdr(at Least 120db), Smart Illumination, Mirror, 3d Nr, Region Of Interest( At Least 4 Areas) • Video Compression H.265; H.264; H.264h; H.264b; Mjpeg • Smart Codec Smart H.265+; Smart H.264+ • Video Frame Rate: - Main Stream: 2688 × 1520@ (1–20 Fps)/2560 × 1440@(1–25/30 Fps) - Sub Stream: 704 × 576@ (1–25 Fps)/704 × 480@(1–30fps) - Stream Capability: 2 Streams - Resolution: 4m (2688 × 1520/2560 × 1440); 3m (2304 × 1296); 1080p (1920 × 1080); 1.3m (1280 × 960); 720p (1280 × 720); D1 (704 × - 576/704 × 480); Vga (640 × 480); Cif (352 × 288/352 × 240) • Bit Rate Control: Cbr/vbr • Video Bit Rate: H.264: 32 Kbps–6144 Kbps; H.265: 12 Kbps–6144 Kbps • Interoperability: Onvif • Cyber Security: Configuration Encryption; Trusted Execution; Digest; Security Logs; Wsse; Account Lockout; Syslog; Video Encryption; 802.1x; Ip/mac Filtering; Https; Trusted Upgrade; Trusted Boot; Generation And Importing Of X.509 Certification • Power Supply: 12 Vdc/poe (802.3af) Operating Temperature –40 °c To +60 °c (–40 °f To +140 °f) 34 Sets Junction Box 34 Sets Pole Mount Bracket(for Bullet Ip Camera) 1 Set Ip Based Paging Microphone 13 Sets Strobe Led Illuminator • Light Type: Led • Light Source: Ir (wavelength 730 Nm) • Center Illuminance: ﹤23u W/cm2 (20 M Illumination) • Illumination Distance: 18 M–35 M (59.06 Ft–114.83 Ft) • Frequency: The Integer Multiple Of Camera Refreshing Frequency • Led Quantity: At Least 42 (high-brightness Led) • Luminous Flux: At Least 16 W • Strobe Pulse Width: 0 Ms–3 Ms • Strobe Delay: 0 Ms–4 Ms • Strobe Time: Records Total Strobe Time • Lens Illuminating Angle: At Least 10° × 30° • Day/night: Sensitivity Adjustable (1–6) Operating Mode: Strobe 1 Set 64 Channel Network Video Recorder • With 8 Pcs Sata At Least 16tb Hdd • Main Processor: Industrial-grade Processor • Operating System: Embedded Linux • Operating Interface: Web, Local Gui • Ai By Recorder: Face Detection; Face Recognition; Perimeter Protection; Smd Plus • Ai By Camera: Face Detection; Face Recognition; Video Metadata (human, Motor Vehicles, And Non-motor Vehicles); Perimeter Protection; Smd Plus; Stereo Analysis; Crowd Distribution; People Counting; Anpr; Vehicle Density; Heat Map • Acupick Ai By Camera +recorder: Max. 32-channel, 1 Combined Event Per Channel/s • Perimeter Performance Ai By Recorder (number Of Channels): 4 Channels, 10 Ivs Rules For Each Channel • Face Attributes: Gender; Age Group; Glasses; Expressions; Face Mask; Beard • Face Detection Performance Of Ai By Camera (number Of Channels):16 Channels • Face Database Capacity: Up To 20 Face Databases With 20,000 Images, With A Total Capacity Of 2.5 G. Name, Gender, Birthday, Address, Credential Type, Credential No., Countries & Regions And State Can Be Added To Each Face Image. • Smd Plus By Recorder: 8 Channels • Metadata Performance Of Ai By Camera (number Of Channels): 8 Channels • Human Attributes Top Color, Top Type, Bottom Color, Bottom Type, Hat, Bag, Age, Gender And Umbrella • Access Channel: 64 Channels • Network Bandwidth: Ai Disabled: 384 Mbps Incoming, 384 Mbps Recording And 384 Mbps Outgoing • Resolution: 32 Mp;24 Mp;16 Mp;12 Mp;8 Mp;6 Mp;5 Mp;4 Mp;3 Mp;1080p;720p;960p; D1; Cif; Qcif • Decoding Capability: Ai Disabled: 2-channel 32 Mp@25 Fps; 2-channel 24mp@25 Fps; 4-channel 16 Mp@30 Fps; 5-channel 12 Mp@30 Fps; 8-channel 8 Mp@30 Fps; 10-channel 6 Mp@30 Fps; 12-channel 5 Mp@30 Fps; 16-channel 4 Mp@30 Fps; 32-channel 1080p@30 Fps • Video Output: 2 Vga, 2 Hdmi; Vga:1920 × 1080, 1280 × 1024, 1280 × 720; Hdmi:3840 × 2160, 1920 × 1080, 1280 × 1024, 1280 × 720 • Multi-screen Display: Main Screen: 1/4/8/9/16/25/36/64; Sub Screen: 1/4/8/9/16 • Video Compression: Smart H.265+; H.265; Smart H.264+; H.264; Mjpeg • Audio Compression: G.711a; G.711u; Pcm; G726 • Multi-channel Playback: Up To 16 Channels • Disk Group: Yes • Raid: Raid 0/1/5/6/10 • Alarm Input: 16 Channels • Alarm Output: 8 Channels Disk Interface: 8 Sata Ports, Each Disk Can Contain Up To 20tb. 1 Set 8 Channel Network Video Recorder • With 2 Pcs Sata At Least 16tb Hdd • Main Processor: Industrial-grade Processor • Operating System: Embedded Linux • Operating Interface: Web, Local Gui • Ai By Recorder: Face Detection; Face Recognition; Perimeter Protection; Smd Plus • Ai By Camera: Face Detection; Face Recognition; Video Metadata (human, Motor Vehicles, And Non-motor Vehicles); Perimeter Protection; Smd Plus; Stereo Analysis; Crowd Distribution; People Counting; Anpr; Vehicle Density; Heat Map • Acupick Ai By Camera +recorder: Max. 8-channel, 1 Combined Event Per Channel/s • Perimeter Performance Ai By Recorder (number Of Channels): 4 Channels, 10 Ivs Rules For Each Channel • Face Attributes: Gender; Age Group; Glasses; Expressions; Face Mask; Beard • Face Detection Performance Of Ai By Camera (number Of Channels): 8 Channels • Face Database Capacity: Up To 20 Face Databases With 20,000 Images, With A Total Capacity Of 2.5 G. Name, Gender, Birthday, Address, Credential Type, Credential No., Countries & Regions And State Can Be Added To Each Face Image. • Smd Plus By Recorder: 8 Channels • Metadata Performance Of Ai By Camera (number Of Channels): 8 Channels • Human Attributes Top Color, Top Type, Bottom Color, Bottom Type, Hat, Bag, Age, Gender And Umbrella • Access Channel: 8 Channels • Network Bandwidth: Ai Disabled: 384 Mbps Incoming, 384 Mbps Recording And 384 Mbps Outgoing • Resolution: 32 Mp;24 Mp;16 Mp;12 Mp;8 Mp;6 Mp;5 Mp;4 Mp;3 Mp;1080p;720p;960p; D1;cif;qcif • Decoding Capability: Ai Disabled: 2-channel 32 Mp@25 Fps; 2-channel 24mp@25 Fps; 4-channel 16 Mp@30 Fps; 5-channel 12 Mp@30 Fps; 8-channel 8 Mp@30 Fps • Video Output: 1 Vga, 1 Hdmi; Vga:1920 × 1080, 1280 × 1024, 1280 × 720; Hdmi:3840 × 2160, 1920 × 1080, 1280 × 1024, 1280 × 720 • Multi-screen Display: Main Screen: 1/4/8/9; Sub Screen: 1/4/8/9 • Video Compression: Smart H.265+; H.265; Smart H.264+; H.264; Mjpeg • Audio Compression: G.711a; G.711u; Pcm; G726 • Multi-channel Playback: Up To 8 Channels • Disk Group: Yes • Alarm Input: 4 Channels • Alarm Output: 2 Channels Disk Interface: 2 Sata Ports, Each Disk Can Contain Up To 20tb. 13 Sets Edge Storage Terminal • Ethernet Port: 1*100/1000 Base-x; 1*10/100/1000 Base-t; 8*10/100 Base-t • Operating System: Linux • Operating Interface: Web Client • Network Protocol: Tcp/ip; Http; Https; Sftp; Ftp; Dns; Rtp; Rtsp; Rtc; Ntp; Dhcp; Ieee 802.1x • Image Encoding Format: Jpeg • Main Processor: High-performance Embedded Processor • Memory: 2 Gb • Power Switch: 1 Power Switch • Indicator Light: 1 × On/off Status; 1 × Operation Status; 1 × Alarm Indicator; 1 × Disk Read/write Indicator • Storage Disk; Ftp; Sftp Osd Overlay: Time, Address, Lane Name, Driving Direction, Violation Code, Violation Name, Vehicle Speed, Speeding Ratio, Plate, Plate Color And Type, Vehicle Color And Size, Vehicle Type, Seatbelt Status, Call, Gps Information, Remote Device Gps, Section Information And Code, Section Distance And Speed Limit, Entry And Exit Time, Entry And Exit Lane, And More. • Positioning: Gps; Bds • Composite Image: Supports Combining 1 To 6 Source Images Into A Composite Image By Using Normal And Related Composition Functions. • Vehicle Search: Search By Time, Channel, Plate, Speed, Lane, Target Type, Plate Color, Vehicle Color, And Violation Type Such As Not Wearing Seatbelt And Calling While Driving. Fuzzy Search Is Supported. Export Results In Csv And Excel Format. • Alarm Event: Storage Full, External Alarm, License Plate Blocklist, Illegal Access, And Security Fault Alarm. • Alarm Input/output: At Least 4 Channels/4 Channels • Hdd Interface: 1 × 4 Tb Disk (included); Supports Max. 4 Sata 3.5" Disks. Rs-232:2, Rs-485: 4, Usb: 2 X Usb 3.0 Ports 1 Set 36-bay Embedded Video Storage • With 36 Pcs Sata At Least 16tb Hdd • Main Processor: 64-bit High-performance Multi-core Processor • Operating System: Embedded Linux Os • Operating Interface: Web (pcapp) • Controller: Single Controller • Cache: 8 Gb By Default (extendable To 64 Gb) • Video Compression: Smart H.265+; H.265; Smart H.264+; H.264; Mjpeg • Audio Compression: G.711a; G.711u; Pcm; G726 Storage: Incoming: 320-channel Or Higher (bandwidth: 800 Mbps At Least); Recording: 320-channel Or Higher (bandwidth: 800 Mbps At Least); Outgoing: 320-channel Or Higher (bandwidth: 800 Mbps At Least); Playback: 32-channel Or Higher (bandwidth: 64 Mbps At Least) • Disk Group: Yes • Raid: Raid 0/1/5/6/10/50/60 • Multi-channel Playback: 16-channel At Least • Record Mode: Auto Record; Manual Record; Search Video Detection; Io Alarm; Thermal Imaging; Intelligent Event; All Record File • Hdd Interface: 36 Slots At Least, Sata, Up To 20 T Per Hdd Or Higher, Hot Swapping, Cmr Power: 1+1 Redundant Power 10 Sets 16 Tb Hard Drive 1 Lot Management Software • Should Support Video Surveillance, Emergency Processing, Arming, Video Analysis And More. • Should Include Modules For Vehicle Violations And Road Events. • Should Easily Scale, Upgrade And Add More Functions To It To Meet End User Expanding Needs. • Organizations: 10 Levels; 999 Organizations In Total • Roles (user Permission): 100 • Users: 1500 Online Users And 10,000 Total Users • Roles Per User: 32 • Users For Vdp Mobile App: Standalone Deployment: At Least 1,000; Cluster Deployment: At Least 1,500 • General Recording Plans: At Least 3,000 • Video Retrieval Plans: At Least 3,000 • File Retrieval Plans: At Least 3,000 • Event Rules: At Least 3,000 • Detection Points: At Least 256 • Maximum Anpr Devices Linked To Each Detection Point: At Least 16 • Detection Areas: At Least 100 • Driving Areas: At Least 100 • Maximum Anpr Devices Linked To Each Driving Area: At Least 100 • Traffic Restriction Rules: At Least 100 • Intersections: 200 • Road Sections: At Least 100 • Support Internal Database/independent Database • Event Records: Max. 300 Million • Face Recognition Records: Max. 300 Million • Passing Vehicle Records: Max. 300 Million • Video Metadata Records: Max. 300 Million Resource File Records: Max. 300 Million 1 Set Management Server • Main Processor: At Least Two 8-core Intel Xeon 4309y Processors • Ram: At Least 16gb*4 Ddr4, Up To 1tb, Ecc Memory • Power: 1+1 Redundant Power • Raid Controller: Perc H355 Controller • Network Port: At Least 8 Gigabit Ports • Serial Port: At Least 1 • Vga: At Least 2 • Usb: At Least 1*usb2.0, 2*usb3.0 Ports Quantity Of Hard Drive: Standard: Two 3.5-inch Sata 2tb Enterprise-level Hdds; Two 2.5-inch Sata 480gb Data Center-level Ssds 20 Sets Ip Based Outdoor Horn • Network Protocols: Http, Udp, Arp, Icmp, Igmp, Sip, Onvif • Frequency Response: 100hz – 18khz • Temperature: -40℃～70℃ Intercom Function Support 13 Sets Desktop Workstation • Processor: Intel Core I5-11500 Processor 2.7 Ghz • Memory: 8gb • Storage: 1tb Hdd Sata & 256gb M.2 Nvme Ssd • Monitor: O Display Size: 21.5” O Display Type: Ips Led O Resolution: 1920x1080 Refresh Rate: 75hz 1 Set 10kva Uninterruptible Power Supply • Voltage: 160~280vac / 277 – 485 Vac • Frequency: 45 ~ 65 Hz • Capacity: 9000w • Battery: O Type: Sealed Lead Acid Maintenance Free O Capacity: 12v/9ah • Other Features: O Status On Led And Lcd Self-diagnostics Upon Power On, O 24hour Routine Checking • Product Certifications: O En62040-1-1, Ul1778 O En62040-2, En61000-3-2, En61000-3-3, Fcc Class A Ce, Cul, Ul 1 Set All-in-one Weather Station • Anemometer, Rain Collector, Temperature And Humidity Measurement Sensors • Standard Radiation Shield Weather Console Inclusive 5 Boxes Indoor Cat6 Cable 2 Sets Sfp Transceiver 1 Set 16 Pon Ports Gpon Olt • Ports: O 2*10/100/1000m Auto Negotiation Ethernet Ports O 2 Sfp Interfaces O 16 Pon Ports • Gpon Function: O Itu-tg.984/g.988 Standard O Support Omci Protocol O T-contdba O Gemport Traffic O Onu Auto Discovers O Ranging Function O Downstream Data Encrypted • Layer 2 Switching Function: O Access/trunk/hybrid L2 Access Mode O Support30kmacaddress O Support4094vlans O Vlan Filter Function, Vlan Transform • Layer 3 Switching Function: O Static Routing O Dhcp Server O Arp Proxy • Multicast Function: O Igmp Snooping O Igmp V1/v2/v3 O Multicast Vlan Translation • Management: O Cli/webnet/telnet/ssh/mqtt O Performance Management O Alarm Management O Security Management • Maintenance: O Device Log O Device Upgrade O Fault Diagnose Condition Monitoring 38 Sets 4ge Xpon Onu • User Port: O 4 10/100/1000 Mbps Adaptive Ethernet Port O Full/half Duplex O Auto Mdi/mdi – X • Indicators: Power, Pon, Lan, Los, Poe • Management: O Epon: Oam / Web / Telnet O Gpon: Omci/ Web / Telnet • Multicast: O Igmp V2 O Igmp Vlan O Igmp Transparent/snooping/proxy • Switch: O Mac Address Learning O Broadcast Storm Suppression O Mac Address Learning Account Limit • Security: O Mac Address/url Filter O Remote Web/ Telnet Access Control 55 Sets Sfp 14 Sets Distribution Box 20 Sets 1:8 Foc Splitter 10 Sets Media Converter 18 Sets 55" Video Wall • Display O Screen Type: Lcd / Indoor O Bezel Width: 0.9mm Or Better O Panel Resolution: 1920x1080p Or Higher O Brightness: 700 Cd/m O Dynamic Contrast Ratio: 30,000:1 O Response Time (typical): 8 Ms O Aspect Ratio: 16:9 O Viewing Angle (h / V): 178 / 178 Degree O Pixel Pitch: 0.63 X 0.63 Mm O Contrast Ratio (typical): At Least 1100:1 • Connectivity O Video Input: Display Port1.2, Dvi-d, Hdmi 1.4, Vga (analog D-sub), Usb 2.0 O Audio Input: 3.5 Mm Mini Jack, Audio Left / Right (rca) O Video Output: Dvi-l, Display Port 1.2 O Audio Output: 3.5mm Mini Jack • Operating Conditions O Temperature Range (operation): 0 ~ 40 Operation: 24/7 18 Sets Matrix Controller • Port Type: Hdmi • Resolution: 1920x1080 / 60hz • Ir: 1 Input/ 1 Output • Relay: 2 Relay Control Ports • Lan Port: 1x Rj45, Max Rate 1000mbps • Network Protocol: Ip/tcp Power: Dc12v; Poe Supported 2 Lot Outdoor Led Screens • Grey Scale: 14 Bit • Viewing Angle: H: 160 V:160 • Refresh Rate: 1920hz • Ip Grade: Front Ip65, Back: Ip54 Interface: Wi-fi, Lan, Usb 1 Set Ip Pabx Call Features: Call Park, Call Forward, Call Transfer, Call Waiting, Caller Id, Call Record, Call History, Ringtone, Ivr, Music On Hold, Call Routes, Did, Dod, Dnd, Disa, Ring Group, Ring Simultaneously, Time Schedule, Pin Groups, Call Queue, Pickup Group, Paging/intercom, Voicemail, Call Wakeup, Sca, Blf, Voicemail To Email, Fax To Email, Speed Dial, Call Back, Dial By Name, Emergency Call, Call Follow Me, Blacklist/whitelist, Voice Conference, Video Conference, Event List, Feature Codes, Busy Camp-on/ Call Completion, Voice Control, Post-meeting Reports, Virtual Fax Sending/receiving, Email To Fax • Media Encryption: Srtp, Tls, Https, Ssh, 802.1x • Analog Telephone Ports: 8 Rj11 Ports • Pstn Line Fxo Ports: 8 Rj11 Ports • Network Interfaces: 3 Self-adaptive Gigabit Ports With Poe+ • Led Indicators: Power, Fxs, Fxo, Lan, Wan And Heartbeat • Lcd Display: Equipped • Reset Switch: Equipped • Network Protocols: Sip, Tcp/udp/ip, Rtp/rtcp, Iax, Icmp, Arp, Dns, Ddns, Dhcp, Ntp, Tftp, Ssh, Http/https, Pppoe, Stun, Srtp, Tls, Ldap, Hdlc, Hdlc-eth, Ppp, Frame Relay (pending), Ipv6, Openvpn • Nat Router Supported • Compliance: Fcc: Part 15 (cfr 47) Class B, Part 68 O Ce: En 55032, En 55035, En 61000-3-2, En 61000-3-3, En 62368-1, Etsi Es 203 021, Itu-t K.21 O Ic: Ices-003, Cs-03 Part I Issue 9 O Rcm: As/nzs Cispr 32, As/nzs 62368.1, As/ca S002, As/ca S003.1/.2 Power Adapter: Ul 60950-1 Or Ul 62368-1 21 Sets Ip Telephony • Network Interfaces: Dual Switched Auto-sensing 10/100/1000 Mbps Gigabit Ethernet Ports With Integrated Poe • Telephony Features: Hold, Transfer, Forward, 5-way Conference, Call Park, Call Pickup, Shared-call Appearance (sca)/bridged-line-appearance(bla), Downloadable Phonebook(xml, Ldap, Up To 2000 Items), Call Waiting, Call Log(up To 2000 Records), Xml Customization Of Screen, Off-hook Auto Dial, Auto Answer, Click-to-dial, Flexible Dial Plan, Hot-desking, Personalized Music Ringtones And Music On Hold, Server Redundancy And Fail-over Protocol Standards: Sip Rfc3261, Tcp/ip/udp, Rtp/rtcp, • Http/https, Arp, Icmp, Dns(a Record, Srv, Naptr), Dhcp, Pppoe, Telnet, Tftp, Ntp, Stun, Simple, Lldp, Ldap, Tr-069, 802.1x, Tls, Srtp, Ipv6 • Feature Keys: 8-line Keys With Up To 6 Sip Accounts, 10 Mpk Extension Keys With Paper Slot, 4 Xml Programmable Context Sensitive Softkeys, 5 Navigation/menu Keys, 9 Dedicated Function Keys For: Message (with Led Indicator), Transfer, Headset, Mute, Send/ Redial, Speakerphone, Vol+, Vol+. • Connectivity: Wi-fi Dual Band 2.4ghz | 5ghz & Bluetooth Integrated • Compliance: O Fcc: Part 15 (cfr 47) Class B O Ce: En55022 Class B; En55024 Class B; En61000-3-2; En61000-3-3; En60950-1 Rcm: As/acif S004; As/nzs Cispr22/24; As/nzs 60950.1 2 Sets High End Ip Telephony • Network Interfaces: Dual Switched 10/100/1000 Mbps Ports With Integrated Poe/poe+ • Graphic Display: Capacitive Touchscreen • Camera: Tiltable 1mp With Privacy Shutter • Connectivity: Wi-fi Dual Band 2.4ghz | 5ghz & Bluetooth Integrated • Compliance: O Fcc: Part 15 Class B; Part 15 Subpart C (15.247); Part 15 Subpart E (15.407); Part 68 Hac O Ic: Rss-247; Rss-gen; Rss-102; Iecs-003; Cs03 O Ce: En 55032; En 55035; En 61000-3-2; En 61000-3-3; En 62368-1; En 301 489-1; En 301 489-17; En 300 328; En 301 893; En 62311 Rcm: As/nzs Cispr 32; As/nzs 4268; As/nzs 62368.1; As/ca S004 1 Lot Lora Gateway & Bridge, Air Quality Sensors & Backend System • End Device: Must Be Able To Receive Data From Sensors. • Gateway: Device Must Be Able To Relay Message From Sensor/end Device To Server. 13 Boxes Outdoor Cat6 Cable 1 Lot Foc, Foc Installation Accessories, Loop Support And Copper Accessories 9 Drums 2km 48 Core Fiber Optic Cable 20 Drums 2km 2 Core Fiber Optic Cable 45 Sets Outdoor Cabinet 30 Sets Bullet Extension Camera Bracket 15 Sets 5m Cctv Pole With Installation 40 Sets Circuit Breaker And Outlet For Outdoor Cabinet 1 Lot Project Managment, Osp Services (installation, Commissioning, Termination, And Testing) Delivery Of The Goods/services Is Required Within Sixty (60) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Otherwise Known As The “government Procurement Reform Act”. In Addition, Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws And Regulations Of Which Grant Similar Rights To Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The City Government Of San Pedro, Laguna And Inspect The Bidding Documents At The Address Given Below During 8:30am To 9:30am Only. Office Of The Bac Secretariat 4/f Conference Room, City Administrator’s Office City Hall Bldg., San Pedro, Laguna A Complete Set Of Bidding Document May Be Purchased By Interested Bidders On The Date, Time And Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Php 25,000.00. Issuance Of Eligibility And Bidding Documents: September 23 – October 14, 2024 8:30am To 9:30am Bac Secretariat 4/f Conference Room City Administrator’s Office City Hall Bldg., San Pedro, Laguna 5. Bids Must Be Delivered To The Address Below On Or Before The Specified Date And Time. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Deadline Of Submission Of Eligibility Requirements And Opening Of Bids: October 14, 2024 10:00am Bac Secretariat 4/f Conference Room City Administrator’s Office City Hall Bldg., San Pedro, Laguna Pre-bid Conference: September 30, 2024 Bid Opening Shall Be On The Same Date And Time For Deadline Of Submission Of Eligibility Requirements And Submission Of Bids And Shall Be Conducted At The Office Of Bac Secretariat. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Given Above. Late Bids Shall Not Be Accepted. 6. The City Government Of San Pedro, Laguna Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bid. Further, City Government Of San Pedro, Laguna, Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. For Further Information, Please Refer To: Mr. Merlin B. Paala Office Of The Bac Secretariat Telefax No. 8847.1722 (signed)atty. Henry B. Salazar Chairman City Bids And Awards Committee

Details: Va Connecticut Healthcare System fire And Smoke Damper Survey, Inspection, And Testing description this Is A Combined Synopsis/solicitation For Commercial Products And Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As Rfq 36c24124q0413. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2023-03. the Associated North American Industrial Classification System (naics) Code For This Procurement Is Naics 541990 (all Other Professional, Scientific, And Technical Services) Size Standard $19.5 Million. this Is Being Bid As A Sdvosb Set-aside. va Connecticut Healthcare System West Haven And Newington Campuses Require Complete Survey, Inspection And Testing Of Fire And Smoke Dampers. Vachs Is Currently Seeking Services For All Labor, Materials, Transportation, Parts, Disposal, And Expertise Necessary To Provide Required Inspections And Testing. This Scope Of Work Is To Provide Details Related To A Service Contract To Support This Necessary Work. Mandatory Site Visits Before 04/17/2024 Please See Below For Details. all Interested Companies Shall Provide Quotations For The Following: site Visits Are Scheduled As: west Haven Vamc Pre-bid Walk Through tuesday April 16 At 7:00 Am; Sign In At Building 15 a Valid Driver S License Is Required To Obtain A Temporary Badge jay Chapman Will Provide Escort 950 Campbell Avenue west Haven, Ct 06516 newington Vamc Pre-bid Walk Through wednesday April 17 9:00 Am; Sign In At Building 3, 3rd Floor Facilities Management Office a Valid Driver S License Is Required To Obtain A Temporary Badge harlan Corriveau Will Provide Escort 555 Willard Avenue newington, Ct 06111 statement Of Work fire And Smoke Damper Survey, Inspection, And Testing commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance background va Connecticut Healthcare System West Haven And Newington Campuses Require Complete Survey, Inspection And Testing Of Fire And Smoke Dampers. Vachs Is Currently Seeking Services For All Labor, Materials, Transportation, Parts, Disposal, And Expertise Necessary To Provide Required Inspections And Testing. justification veterans Health Administration (vha) Seeks To Continue To Improve The Operational Capabilities By Establishing Services That Result In Few Operational Problems, Improved Communications, Increased Efficiency Within The Facility And Improve The Quality Of Services To Veterans As Required By Vha Directives. location Of Services va Medical Center West Haven 950 Campbell Avenue west Haven, Ct 06516 va Medical Center Newington 555 Willard Avenue newington, Ct 06111 period Of Performance the Period Of Performance Is 90 Calendar Days From Ntp. qualifications to Be Considered Eligible For Consideration, Potential Bidders Shall Provide Upon Request, Documentation Of Factory Certified Service/maintenance Training On The Specific Equipment Under The Terms Of This Contract. The Contracting Officer And/or Contracting Officer S Representative (cor) Specifically Reserve The Right To Reject Any Of The Service Provider S Personnel And Refuse Them Permission To Work On The Equipment Outlined Herein, Based Upon Credentials Provided. scope Of Work the Service Provider Shall Furnish All Labor, Materials, Equipment, Tools, Supervision, Disposal, And All Incidentals To Complete The Work For The Services Described In This Document Including Inspections And Testing Required Per Nfpa 101, Nfpa 105 2021, And Nfpa 80 2021). scheduled Survey, Inspections And Testing Shall Be Completed Monday Through Friday In Non-critical/non-patient Care Buildings During Regular Business Hours Or As Coordinated; Or Monday Through Saturday Outside Of Regular Business Hours After 5:00 P.m. And Before 6:00 A.m. Or As Coordinated With The Va Cor For Sunday. A Minimum Notice Of Fourteen (14) Calendar Days. No Work Shall Be Performed On Government Holidays Unless An Emergency Status Has Been Indicated By The Va Contracting Officer. the Va Connecticut Healthcare System Newington Medical Center Campus Normal Operating Hours Are 7:00 A.m. 5:00 P.m. Special Consideration And Coordination May Be Required To Access Pharmacy, Procedure And Treatment Rooms. the Va Connecticut Healthcare System West Haven Medical Center Campus Is A 24 Hour Tertiary Care Medical Center And May Require Special Consideration And Coordination To Access Operating Rooms, Intensive Care Units, Inpatient Wards, Inpatient And Outpatient Pharmacy, Procedure, Laboratory, And Treatment Rooms. service Provider Shall Coordinate With Va Cor And Safety & Outage Coordinator To Ensure That No Patients Are Within Critical Patient Areas And/or Receiving Treatment Before Performing Work. Work In Canteen Storage Areas Requires Coordination With Canteen Service For Access And Escort Personnel. operation Of Smoke Dampers Require The Initiation Of The Fire Alarm System. Service Provider And Sub-contractors Shall Coordinate With Va Cor, Safety & Outage Coordinator, And Va Connecticut Safety For Contact Information To The Fire Alarm Company Servicing Newington And West Haven Campuses. Include All Costs Associated With Required Work And Support To Shunt Master Box, Trip Smoke Detector In Affected Smoke Zone And Witness Smoke Damper Operation. newington And West Haven Fire Alarm Servicer: veterans Fire Life Safety rod Davis Rod.davis@vflsc.com description Of Services: service Provider Shall Schedule And Coordinate Work With Va Cor. any Outages Shall Follow Proper Coordination And Notification Through The Va Cor And Safety & Outage Coordinator. all Loto Requests And Procedures Shall Be In Compliance With The Va Connecticut Healthcare System Medical Center Policy 138-075. Coordinate All Loto With The Va Cor And Safety & Outage Coordinator. service Provider Shall Locate All Fire Dampers And Smoke Dampers, And Once Located, Operate (actuate) Or Identify Inoperable Dampers. Hospital Furnished Data And Va Hvac Shop Personnel Shall Be Used As A Guide For Location. Dampers In Mechanical Rooms, Offices And Corridors Are Accessible Via Panels In The Ceiling And Ductwork. vachs Will Furnish Damper Inventory For West Haven B1 And B2. vachs Will Provide Electronic Construction Documents For The Newington Campus Modernization Project Including B1, B2w, B2c, And B2e. the Alphanumeric Designation Used For Each Damper Identification Tag Shall Begin With The Particular Damper S Building Number, Floor Location, Followed By The Damper S Wing Location And Number Of The Damper Within The Floor. Note The Location On The Drawings Submitted To The Va. service Provider Shall Inspect And Certify All Fire And Smoke Dampers At The Va Connecticut Healthcare System Newington And West Haven Campus Buildings In Accordance With The Newington And West Haven Campus Buildings Identified Herein. service Provider Shall Remove And Reset Fusible Links To Verify That Each Damper Fully Closes, And If Necessary, Replace Any Fusible Link That Is Compromised. Provide A Recommended Specification For Va Connecticut Review And Approval. service Provider Shall Remove Debris And Lubricate All Moving Parts On Each Damper. Damper Shall Be Exercised To Ensure It Can Move Freely. service Provider Shall Clear Each Damper Of Any Debris That Would Impede The Damper S Normal Operation. Remove And Dispose Of Debris. service Provider Shall Replace Or Repair Damaged Or Oxidized Springs. Replace Missing Access Handles For The Doors For The Fire And Smoke Dampers. service Provider Shall Perform And Provide Safety, Supervision, Ppe And Cleanup Associated With Completing The Referenced Inspections And Testing. work Shall Be Completed In Accordance With Industry Standard And Comply With Va Regulations And Code Requirements To Include But Not Limited To Osha And Nfpa. all Areas Of Work Shall Be Considered Clinical Area And Require Full Dust Containment With Hepa Exhaust. areas Of The Operating Room, Sterile Processing Service, And Other Areas Considered To Be Sterile May Require The Service Provider To Wear Disposable Shoe Covers, Overalls, And Head Cover. work In Corridors And Public Areas Require Dust Containment. In Corridors, Public Areas, And Clinical Areas, Provide Containment Via Aire Guardian Titan Mobile Dust Containment Cart, Model Ag8000 Or Equivalent. Do Not Block Egress In The Execution Of Work. work That Requires Dust Protection Measures And Localized Cleanup To Prevent The Introduction Or Transmission Of Dust Into The Medical Center. Dust Protection Measures Include Containment. Dust And Debris Must Be Removed, And The Area Cleaned Prior To Moving To Another Worksite. Service Provider Shall Damp Mop As Required To Control Dust And Keep Traffic Areas Clean And Safe. Place Cones And Signage To Mark Wet Areas. The Service Provider Shall Take All Precautions As Required To Control Dust And Not Disrupt Hospital Operations. a Safe Environment Shall Be Always Maintained. Tools, Equipment And Work Area Shall Be Secure. Do Not Leave Work Site (tools, Equipment, Etc.) Unattended Or Accessible By The Public. prohibited Equipment: Work Area Is Within An Active Medical Center. Equipment That Uses Hydrocarbon Fuel, Flammable Fuel, And/or Produces Carbon Monoxide Exhaust Are Prohibited From Use Within The Medical Center Or Where Fumes Can Be Introduced Into The Medical Center. At Its Option The Service Provider Shall Use Either Electric Or Electric Pneumatic Tools To Perform The Required Work. means Of Egress: Do Not Block Any Exit, Discharge, Or Path Of Travel From Occupied Buildings. service Provider Shall Request And Coordinate Outages Of Smoke Detectors With The Va Cor/ Va Connecticut Safety Office. deliverables prior To The Start Of Work, Provide The Following: site Specific Safety Plan schedule Of Work Plan when Hours Work Plan And Request infection Control Plan service Provider Shall Provide A Complete Inventory Database In Hard Copy And Electronic Format. service Provider Shall Provide A Written, Hard Copy And Digital Report To Be Delivered To Document Dampers As Of The Date Of The Report. Based On Information Provided To Service Provider By Va, Service Provider Agrees To Provide The Following Inspection Services With Respect To Va S Dampers (collectively, Inspection Services Reference Nfpa 105 2021 And Nfpa 80 2021). include Spreadsheet Inventory With Location, Damper S Identification Number, And Pass/fail Status Of Inspection. for Failed Dampers, Provide A Detailed Report And Explanation Of The Failure And Corrective Action. service Provider Shall Provide A Recommendation Of Dampers Not Required And Estimated Cost Of Decommissioning. service Provider Shall Provide A Written Report Of Any Deficiencies Discovered To The Va Cor And Contracting Officer. if A Condition Arises Where There Is No Access To A Damper, Serviced Provider Shall Recommend Access Door, Access Door Size And Cost To Provide A Complete Installation. Access Doors Shall Be Ul Listed And Approved For 2-hour Wall Or Ceiling, Size Up To 24 X24 . Base Cost Shall Provide For Installation In Plaster And Drywall Only. the Va Will Furnish Electronic Floor Plan Drawings In Autocad Format To The Service Provider. service Provider Shall Provide Life Safety Drawings Indicating The Location Of Each Damper In Autocad Format And Provide Finalized Drawings In 24x36 Hard Copy And Electronic Format. Place An Id Sticker Identifying Each Damper As Well As A Fire Damper Sticker On The Ceiling Grid Indicating The Presence Of A Fire Damper. west Haven Campus Buildings building 1: Clinical building 2: Clinical building 2a: Clinical - Nic building 3: Admin building 4: Admin building 5: Admin/research building 6: Admin building 7: Nic building 8: Admin building 8a: Admin building 9: Admin building 10: Nic building 11: Nic building 11a: Nic building 12: Admin building 12a: Nic fisher House: Hospitality building 14a: Nic building 15: Engineering building 15a: Nic building 16: Engineering building 19: Engineering building 21: Nic building 22: Nic building 24: Engineering building 27: Research building 32: Engineering building 34: Research building 35: Admin building 35a: Admin/research building 36: Clinical building 36a: Nic building 38: Engineering building 39: Engineering building 50: Engineering west Haven Fire Damper Inventory For B1 And B2 building fire smoke total Dampers 1 44 15 59 2 60 1 61 west Haven Building 1 Inventory floor fire smoke total Dampers ground 3 0 3 sub Basement 2 0 2 1 2 0 2 2 1 0 1 3 2 0 2 4 12 3 15 6 4 0 4 7 2 2 4 9 7 4 11 10 9 6 15 west Haven Building 1 Dampers And Locations floor damper Number damper Type damper Location ground g-fd-001 fire across Room 174 Hatch On Floor ground g-fd-002 fire across Room 174 Hatch On Floor ground g-fd-003 fire inside Room G196 sub-basement sg-fd-001 fire inside Room Sg129 sub-basement sg-fd-004 fire inside Room Sg165 1 1-fd-001 fire inside Room 1145 1 1-fd-003 fire housekeeping 2 2-fd-004 fire inside Room 2129 3 3-fd-002 fire inside Room 3163a 3 3-fd-003 fire inside Room 3163a 4 4-fd-001 fire across From The Main Elevators 4 4-fd-002 fire the Floor Damper Inside Mechanical Rm Next To Elevator P5 4 4-fd-003 fire the Floor Damper Inside Mechanical Rm Next To Elevator P5 4 4-fd-004 fire the Floor Damper Inside Mechanical Rm Next To Elevator P5 4 4-fd-005 fire the Floor Damper Inside Mechanical Rm Next To Elevator P5 4 4-fd-006 fire in Mechanical Room 4/260 4 4-fd-007 fire the Floor Damper Inside Mechanical Rm Next To Elevator P5 4 4-fd-008 fire inside R0om 4/162 4 4-fd-009 smoke inside R0om 4/162 4 4-fd-010 smoke in Mechanical Room 4/255 4 4-sd-011 smoke in Mechanical Room 4/255 4 4-sd-012 fire in Mechanical Room 4/255 4 4-sd-013 fire in Room 4/148 4 4-sd-014 fire 4200 Kitchen Alcove 4 4-sd-015 fire in Storage Room By 6/135 6 6-fd-001 fire in The Storage Room By 6/135 6 6-fd-002 fire in The Storage Room By 6/135 6 6-fd-003 fire in Clean Linen Room 6/100 6 6-fd-004 fire in The Clean Linen Room 6/100 7 7-sd-001 smoke in The Ceiling Above The Door To Outpatient Detox Room 7 7 7-sd-002 smoke in The Ceiling Above The Double Doors Next To Stairwell 1 7 7-sd-003 fire near The Door To The Right Behind The Nursing Station 7 7-sd-004 fire in Room 7/128 Across The Nursing Station 9 9-fd-001 fire the Floor Damper In Room 9/112 9 9-fd-002 fire the Floor Damper In Room 9/112 9 9-fd-003 fire the Floor Damper In Room 9/112 9 9-fd-004 fire the Floor Damper In Room 9/112 9 9-fd-005 fire inside The Hatch Next To Freight Elevator S1 9 9-sd-006 smoke in The Ceiling Outside Of Room 9/127 9 9-sd-007 smoke in Room 9/127 9 9-fd-008 smoke in Room 9/127 9 9-fd-009 fire in The Ceiling Hatch Inside Of Housekeeping Room 9/145 9 9-fd-010 fire in The Ceiling Hatch Inside Of Housekeeping Room 9/145 9 9-fd-011 fire in The Ceiling By Room 9/144 10 10-fd-001 fire in The Elevator Machine Room 10 10-fd-002 fire in The Elevator Machine Room 10 10-fd-003 fire in The Elevator Machine Room 10 10-fd-004 fire the Wall Damper In The East Mechanical Room 10 10-fd-005 smoke the Wall Damper In The East Mechanical Room 10 10-fd-006 smoke the Wall Damper In The East Mechanical Room 10 10-fd-007 smoke the Wall Damper In The East Mechanical Room 10 10-fd-008 smoke the Wall Damper In The East Mechanical Room 10 10-fd-009 fire above The Door To The West Mechanical Room 10 10-fd-010 smoke inside The West Mechanical 10 10-fd-011 smoke inside The West Mechanical 10 10-fd-012 fire inside The West Mechanical 10 10-fd-013 fire inside The West Mechanical 10 10-fd-014 fire inside The West Mechanical 10 10-fd-015 fire inside The West Mechanical west Haven Building 2 Inventory floor fire smoke total Dampers 2 1 0 1 3 12 0 12 4 10 0 10 5 8 0 8 6 14 0 14 7 8 1 9 9 7 0 7 west Haven Building 2 Dampers And Locations floor damper Number damper Type damper Location 2 2-fd-006 fire across Room 2245 3 3-fd-001 fire elevator Corridor 3 3-fd-002 fire inside Room 3224 3 3-fd-003 fire inside Room 3165 3 3-fd-004 fire inside Room 3165 3 3-fd-005 fire inside Room 3169 3 3-fd-006 fire inside Room 3169 3 3-fd-007 fire inside Room 3152 3 3-fd-008 fire inside Room 3152 3 3-fd-009 fire inside Room 3149 3 3-fd-010 fire inside Room 3149 3 3-fd-011 fire inside Room 3149 3 3-fd-012 fire inside Room 3217 4 4-fd-001 fire inside Room 4165 4 4-fd-002 fire inside Room 4165 4 4-fd-003 fire inside Room 4169 4 4-fd-004 fire inside Room 4169 4 4-fd-005 fire inside The Elevator Corridor 4 4-fd-007 fire inside Room 4150 4 4-fd-008 fire inside Room 4150 4 4-fd-009 fire inside Room 4150 4 4-fd-010 fire inside Room 4153 4 4-fd-011 fire inside Room 4153 4 5-fd-001 fire inside Room 4153 5 5-fd-001 fire inside Room 5165 5 5-fd-002 fire inside Room 5165 5 5-fd-003 fire waiting Room Area 5170 5 5-fd-004 fire waiting Room Area 5170 5 5-fd-006 fire elevator Corridor 5 5-fd-009 fire inside Room 5217 5 5-fd-010 fire inside Room 5185 5 5-fd-011 fire inside Room 5185 6 6-fd-001 fire inside Room 6163 6 6-fd-002 fire inside Room 6163 6 6-fd-003 fire inside Room 6161 6 6-fd-004 fire inside Room 6161 6 6-fd-005 fire elevator Corridor 6 6-fd-006 fire inside Room 6212 6 6-fd-007 fire inside Room 6146 6 6-fd-008 fire inside Room 6146 6 6-fd-009 fire inside Room 6146 6 6-fd-010 fire inside Room 6149 6 6-fd-011 fire inside Room 6149 6 6-fd-012 fire inside Room 6204 6 6-fd-013 fire inside Room 6195 6 6-fd-014 fire inside Room 6195 7 7-fd-002 fire inside Room 7160 7 7-fd-008 smoke inside Room 7100 7 7-fd-009 fire inside Room 7145 7 7-fd-010 fire inside Room 7145 7 7-fd-011 fire inside Room 7145 7 7-fd-012 fire inside Room 7145 7 7-fd-013 fire inside Room 7146 7 7-fd-015 fire inside Room 7148 7 7-fd-017 fire outside Room 7181 9 9-fd-001 fire mechanical Room 9 9-fd-002 fire mechanical Room 9 9-fd-003 fire mechanical Room 9 9-fd-004 fire mechanical Room 9 9-fd-005 fire mechanical Room 9 9-fd-006 fire mechanical Room 9 9-fd-007 fire mechanical Room fisher House emergency west Haven Campus Map: Not To Scale newington Campus Buildings building 1: Clinical building 2c: Clinical building 2e: Admin/clinical building 2w: Clinical building 3: Engineering building 4: Nic building 11: Engineering - Nic building 6: Nic victory Gardens Not In Contract building 7: Nic building 8: Nic building 11: Nic building 12: Nic building 14: Nic building 21: Nic building 30: Nic building 32: Nic building 33: Nic building 34: Nic building 42: Admin building 44: Nic building 46: Nic building 50: Nic building 64: Nic building 65: Engineering building 168: Nic combined Synopsis-solicitation For Commercial Products And Commercial Services revision 01 effective: 05/30/2023 newington Campus Map: Not To Scale all Service Provider Personnel, Sub-contractors And Representatives Visiting Va Sites Will Be Required To Sign In Upon Arrival At Building 15 In West Haven Or The 3rd Floor Of Building 3 In Newington And/or Retain A Temporary Va Badge. Each Visiting Individual Be Required To Enter Their Name, Their Company S Name, Va Project Title, Reason For Visit, And The Times Of Arrival And Departure. Arrangements For After Normal Hour Working Site Visits Must Be Made In Advance And During Normal Working Hours. general: The Contracting Officer Reserves The Right To Terminate Any Services, Without Payment For Services Completed, If Such Services Are Not Needed Or Are Not Being Adequately Completed. approved Plans And Permits: Prior To The Start Of Construction, Submit To Va Copies Of All Required Permits. site Visits: Day To Day Administration Will Be Performed By The Cor. Periodic Reviews, Tests, And Other Field Observation By The Government Are Not To Be Interpreted As Superintendence Nor As Resulting In Any Approval Of The Service Provider S Apparent Progress Toward Meeting The Government S Objectives; But Are Intended To Discover Any Information That The Contracting Officer May Be Able To Call To The Service Provider S Attention To Prevent Costly Misdirection Of Effort. the Service Provider Shall Remain Responsible For Constructing, Operating, And Maintaining The Site In Full Accordance If The Requirements Of This Solicitation. the Service Provider Shall Provide Va With A Copy Of All Inspection Reports For Inspections Conducted By Local, Regional, And State Code Authorities From The Start Of Construction Through Issuance Of The Certificate Of Occupancy Or Completion. the Service Provider Shall Develop And Provide To The Va The Following: safety Plan: The Service Provider Shall Produce Work In Accordance With The Latest Editions Of All Applicable Dva Guidelines (e.g. Standards, Master Specifications, Standard Details, Special Design Criteria To Meet Hospital Joint Commission (jcaho) Requirements), Nfpa, Federal And State Codes Pertinent To The Project Scope. schedule Of Work Plan. when Hours Work Plan And Request. infection Control Plan. all Applicable Personnel On Site Are Required To Obtain An Occupational Safety And Health Administration (osha) 10 Hour Certification, And The Site Competent Person For The Service Provider Must Obtain An Osha 30 Hour Construction Certification. per Va Directive 1805, Smoking Vaping, And Smokeless Tobacco Are Prohibited On The Grounds Of Va Facilities, Including In Vehicles. This Directive Applies To All Service Providers And Their Employees. no Photography Of Va Premises Is Allowed Without Written Permission Of The Contracting Officer. Patients And Staff Are Not To Be Photographed At Any Time. prior To Commencing Work Onsite, All Service Providers And Provider Personnel Shall Furnish Proof Of Receipt Of Required Covid Vaccinations And Boosters In Compliance With Current Vha Directives. prior To Commencing Work Onsite, All Service Providers And Provider Personnel Shall Furnish Proof Of Receipt Of Required Tuberculosis Testing In Compliance With Vha Directive 1131(5), Dated June 04, 2021. parking For Service Provider And Its Employees Shall Be In Designated Areas Only. Service Provider To Coordinate With Cor. the Service Provider Shall Confine All Operations (including Storage Of Materials) On Government Premises To Areas Authorized Or Approved By The Va Contracting Officer. The Service Provider Shall Hold And Save The Government, Its Officers, And Agents, Free And Harmless From Liability Of Any Nature Occasioned By The Service Provider S Performance. Working Space And Space Available For Storing Materials Shall Be As Determined By The Cor. Workers Are Subject To The Rules Of The Medical Center Applicable To Their Conduct. Execute Work In Such A Manner As To Reduce Impacts With Work Being Done By Others. billing: Provide Cor With A Report Or Statement Of Work Completed And Include Statements With Request For Payment. Statement Should Include Service Completed And The Date Each Service Item Was Completed. Labor Charges Shall Be Billed Hourly, And Any Unused Labor Totals Will Be Credited Back To The Va Medical Center On The Next Billing Cycle, Upon Receipt Of The Service Report. safety Codes / Certification / Licensing: environmental Abatement Work, If Necessary, Is To Be Performed By Service Provider Under Supervision And Monitoring For The Va By A Certified Industrial Hygienist. the Service Provider Shall Comply With All Codes As Described Above, As Well As Codes Customarily Applied In Va Construction Jobs Such As Nfpa Fire Code, Osha, Va Design Guides, Etc. Labs Used By The Service Provider Shall Be Licensed As Required By Any Applicable Governing Agencies, And Their Certifications And Licenses Shall Be Included In The Reports. travel: service Provider And/or Subcontractors Will Travel From Their Place Of Business To The West Haven And Newington Va Medical Center Of The Va Connecticut Healthcare System. site Visit: there Is A Mandatory Site Visit To Bid On This Contract. Please Reach Out To Melissa Metevelis At Melissa.metevelis@va.gov Before 04/17/2024. west Haven Vamc Pre-bid Walk Through tuesday April 16 At 7:00 Am; Sign In At Building 15 a Valid Driver S License Is Required To Obtain A Temporary Badge jay Chapman Will Provide Escort 950 Campbell Avenue west Haven, Ct 06516 newington Vamc Pre-bid Walk Through wednesday April 17 9:00 Am; Sign In At Building 3, 3rd Floor Facilities Management Office a Valid Driver S License Is Required To Obtain A Temporary Badge harlan Corriveau Will Provide Escort 555 Willard Avenue newington, Ct 06111 evaluation Process award Will Be Made To The Best Price, As Determined To Be The Most Beneficial To The Government. Please Read Each Section Below Carefully For The Submittals And Information Required As Part Of The Evaluation. Failure To Provide The Requested Information Below Shall Be Considered Non-compliant And Your Quote Could Be Removed From The Evaluation Process. vendors Quotes Shall Be Evaluated Under Far Part 13.106-2(b) -- Evaluation Of Quotations Or Offers. The Government Will Award A Contract Resulting From This Solicitation To The Responsible Vendor Whose Quote Conforming To The Solicitation Will Be Most Advantageous To The Government, Price, Past Performance, And Capabilities. The Following Factors Shall Be Used To Evaluate Offers: 1. Price (follow These Instructions): a. Vendor Shall Provide A Quote For The Services Above. Vendors Must Also Provide All Applicable Labor Rates For The Solicited Services So They Can Be Compared To The Applicable Wage Determination For Compliance With The Service Contract Labor Standards (scls) If Applicable. b. Ensure Your Validation Is Current In The System For Award Management (sam)( Https://www.sam.gov). Federal Acquisition Regulations Require That Federal Contractors Register In The Sam Database At Http://www.sam.gov And Enter All Mandatory Information Into The System. Award Cannot Be Made Until The Contractor Has Registered. Offerors Are Encouraged To Ensure That They Are Registered In Sam Prior To Submitting Their Quotation. 2. Capable: The Vendors Quote Shall Be Evaluated To Determine If The Organization Has The Experience And Capabilities To Provide The Requested Services In Accordance With The Statement Of Work In A Timely Efficient Manner. a. Contractor Shall Demonstrate Their Corporate Experience And Approach To Meet All Requirements. b. Contractor Shall Provide A List Of All Services Included In The Price. c. Contractor Shall Provide All Current And Relevant Licenses And/or Certifications For The State Of Service If Applicable. d. If You Are Planning To Sub-contract Some Or All Of This Work, Please Provide The Name And Address(s) Of All Subcontractor(s) (if Applicable) And A Description Of Their Planned Subcontracting Effort. e. Contractor Shall State And/or Demonstrate Their Ability To Meet All Requirements And Deliverables Stated In This Solicitation And Statement Of Work. Any Additional Information To Further Identify How The Company Is Experienced And Capable Of Performing The Requested Work Is Welcome. 3. Veterans Preference Factor (per 852.215-70): The Government Will Assign Evaluation Credit For An Offeror (prime Contractor) Which Is A Service-disabled Veteran-owned (sdvosb) Or A Veteran-owned Small Business (vosb). Non-sdvosb/vosb Offerors Proposing To Use Sdvosbs Or Vosbs As Subcontractors Will Receive Some Consideration Under This Evaluation Factor. a. For Sdvosbs/vosbs: In Order To Receive Credit Under This Factor, An Offeror Shall Submit A Statement Of Compliance That It Qualifies As A Sdvosb Or Vosb In Accordance With Vaar 852.215-70, Service-disabled Veteran-owned And Veteran-owned Small Business Evaluation Factors . Offerors Are Cautioned That They Must Be Registered And Verified In Vendor Information Pages (vip) Database (http://www.vetbiz.gov). i. Verified Sdvosbs Will Receive A 5% Price Credit (e.g. If A Sdvosb Submits An Offer Of $100.00, It Will Be Evaluated As If It Submitted An Offer Of $95.00). ii. Verified Vosbs Will Received A 2.5% Price Credit (e.g. If A Vosb Submits An Offer Of $100.00, It Will Be Evaluated As If It Submitted An Offer Of $97.50). the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. (x) Please Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Your Offer Via The Sam.gov Website Or A Written Copy. (xi) Clause 52.212-4, Contract Terms And Conditions -- Commercial Items, Applies To This Acquisition In Addition To The Following Addenda S To The Clause: 52.252-2 Clauses Incorporated By Reference (feb 1998), 52.203-17 Contractor Employee Whistleblower Rights And Requirement To Inform Employees Of Whistleblower Rights (jun 2020), 52.204-4 Printed Or Copied Double-sided On Postconsumer Fiber Content Paper (may 2011), 52.204-13 System For Award Management Maintenance (oct 2018), 52.204-18 Commercial Government Entity Code Maintenance (aug 2020), 52.217-9 Option To Extend The Term Of The Contract (mar 2000), 52.228-5 Insurance-work On A Government Installation (jan 1997), 52.232-40 Providing Accelerated Payments To Small Business Subcontracting (dec 2013), 852.212-70 Provisions And Clauses Applicable To Va Acquisitions Of Commercial Items (apr 2020) 852.203-70 Commercial Advertising 852.219-74, Va Notice Of Total Service-disabled Veteran-owned Small Business Set-aside 852.232-72 Electronic Submissions Of Payment Requests 852.233-70 Protest Content/alternative Dispute Resolution 852.233-71 Alternate Protest Procedure 852.270-1 Representatives Of Contracting Officers 852.219-74 Limitations On Subcontracting Monitoring And Compliance (jul 2018) as Prescribed In 819.7203(a) Insert The Following Clause: (a) This Solicitation Includes 852.219-74, Va Notice Of Total Service-disabled Veteran-owned Small Business Set-aside, (b) Accordingly, Any Contract Resulting From This Solicitation Is Subject To The Limitation On Subcontracting Requirements In 13 Cfr 125.6. The Contractor Is Advised That In Performing Contract Administration Functions, The Contracting Officer May Use The Services Of A Support Contractor(s) Retained By Va To Assist In Assessing The Contractor S Compliance With The Limitations On Subcontracting Or Percentage Of Work Performance Requirements Specified In The Clause. To That End, The Support Contractor(s) May Require Access To Contractor S Offices Where The Contractor S Business Records Or Other Proprietary Data Are Retained And To Review Such Business Records Regarding The Contractor S Compliance With This Requirement. (c) All Support Contractors Conducting This Review On Behalf Of Va Will Be Required To Sign An Information Protection And Non-disclosure And Disclosure Of Conflicts Of Interest Agreement To Ensure The Contractor S Business Records Or Other Proprietary Data Reviewed Or Obtained In The Course Of Assisting The Contracting Officer In Assessing The Contractor For Compliance Are Protected To Ensure Information Or Data Is Not Improperly Disclosed Or Other Impropriety Occurs. (d) Furthermore, If Va Determines Any Services The Support Contractor(s) Will Perform In Assessing Compliance Are Advisory And Assistance Services As Defined In Far 2.101, Definitions, The Support Contractor(s) Must Also Enter Into An Agreement With The Contractor To Protect Proprietary Information As Required By Far 9.505-4, Obtaining Access To Proprietary Information, Paragraph (b). The Contractor Is Required To Cooperate Fully And Make Available Any Records As May Be Required To Enable The Contracting Officer To Assess The Contractor S Compliance With The Limitations On Subcontracting Or Percentage Of Work Performance Requirement. (end Of Clause) 852.219-77 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction. as Prescribed In 819.7009(c) Insert The Following Clause: va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction (sep 2021) (deviation) (a) Pursuant To 38 U.s.c. 8127(k)(2), The Offeror Certifies That (1) If Awarded A Contract (see Far 2.101 Definition), It Will Comply With The Limitations On Subcontracting Requirement As Provided In The Solicitation And The Resultant Contract, As Follows: [contracting Officer Check The Appropriate Box Below Based On The Predominant Naics Code Assigned To The Instant Acquisition As Set Forth In Far 19.102.] (i) [x] Services. In The Case Of A Contract For Services (except Construction), The Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219-74 Or Vosbs As Set Forth In 852.219-11. Any Work That A Similarly Situated Vip-listed Subcontractor Further Subcontracts Will Count Towards The 50% Subcontract Amount That Cannot Be Exceeded. Other Direct Costs May Be Excluded To The Extent They Are Not The Principal Purpose Of The Acquisition And Small Business Concerns Do Not Provide The Service As Set Forth In 13 Cfr 125.6. (ii) [ ] General Construction. In The Case Of A Contract For General Construction, The Contractor Will Not Pay More Than 85% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219-74 Or Vosbs As Set Forth In 852.219-11. Any Work That A Similarly Situated Vip-listed Subcontractor Further Subcontracts Will Count Towards The 85% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (iii) Special Trade Construction Contractors. In The Case Of A Contract For Special Trade Contractors, The Contractor Will Not Pay More Than 75% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219-74 Or Vosbs As Set Forth In 852.219-11. Any Work That A Similarly Situated Subcontractor Further Subcontracts Will Count Towards The 75% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (2) The Offeror Acknowledges That This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States. The Offeror Further Acknowledges That This Certification Is Subject To Title 18, United States Code, Section 1001, And, As Such, A False, Fictitious, Or Fraudulent Certification May Render The Offeror Subject To Criminal, Civil, Or Administrative Penalties, Including Prosecution. (3) If Va Determines That An Sdvosb/vosb Awarded A Contract Pursuant To 38 U.s.c. 8127 Did Not Act In Good Faith, Such Sdvosb/vosb Shall Be Subject To Any Or All Of The Following: (i) Referral To The Va Suspension And Debarment Committee; (ii) A Fine Under Section 16(g)(1) Of The Small Business Act (15 U.s.c. 645(g)(1)); And (iii) Prosecution For Violating Section 1001 Of Title 18. (b) The Offeror Represents And Understands That By Submission Of Its Offer And Award Of A Contract It May Be Required To Provide Copies Of Documents Or Records To Va That Va May Review To Determine Whether The Offeror Complied With The Limitations On Subcontracting Requirement Specified In The Contract. The Contracting Officer May, At Their Discretion, Require The Contractor To Demonstrate Its Compliance With The Limitations On Subcontracting At Any Time During Performance And Upon Completion Of A Contract If The Information Regarding Such Compliance Is Not Already Available To The Contracting Officer. Evidence Of Compliance Includes, But Is Not Limited To, Invoices, Copies Of Subcontracts, Or A List Of The Value Of Tasks Performed. (c) The Offeror Further Agrees To Cooperate Fully And Make Available Any Documents Or Records As May Be Required To Enable Va To Determine Compliance With The Limitations On Subcontracting Requirement. The Offeror Understands That Failure To Provide Documents As Requested By Va May Result In Remedial Action As The Government Deems Appropriate. (d) Offeror Completed Certification/fill-in Required. The Formal Certification Must Be Completed, Signed, And Returned With The Offeror S Bid, Quotation, Or Proposal. The Government Will Not Consider Offers For Award From Offerors That Do Not Provide The Certification, And All Such Responses Will Be Deemed Ineligible For Evaluation And Award. i Hereby Certify That If Awarded The Contract, [insert Name Of Offeror] Will Comply With The Limitations On Subcontracting Specified In This Clause And In The Resultant Contract. I Further Certify That I Am Authorized To Execute This Certification On Behalf Of [insert Name Of Offeror]. printed Name Of Signee: _________________________________ printed Title Of Signee: ________________________________ signature: ______________________________________________ date: ___________________________________________________ company Name And Address: _____________________________________________________________________________________ (end Of Clause) 852.242-71 Administrative Contracting Officer. as Prescribed In 842.271, Insert The Following Clause: administrative Contracting Officer (oct 2020) the Contracting Officer Reserves The Right To Designate An Administrative Contracting Officer (aco) For The Purpose Of Performing Certain Tasks/duties In The Administration Of The Contract. Such Designation Will Be In Writing Through An Aco Letter Of Delegation And Will Identify The Responsibilities And Limitations Of The Aco. A Copy Of The Aco Letter Of Delegation Shall Be Furnished To The Contractor. (end Of Clause) (xii) Clause At 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, Applies To This Acquisition And In Addition To The Following Far Clauses Cited, Which Are Also Applicable To The Acquisition: 52.203-6, 52.204-10, 52.209-6, 52.219-4, 52.219-8, 52.219-6, 52.219-28, 52.222-3, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.222-50, 52.223-18, 52.225-3, 52.225-13, 52.232-33, 52.222-41 (wage Determination Newington Vamc Wd 2015-4119 (rev-26) And West Haven Vamc Wd 2015 4127 (rev-26), 52.222-42, 52.222-43, 52.222-55, 52.222-62 (xiii) All Contract Requirement(s) And/or Terms And Conditions Are Stated Above. (xiv) The Defense Priorities And Allocations System (dpas) And Assigned Rating Are Not Applicable To This Requirement. (xv) Rfq Responses Are Due Nlt 04/22/2024 At 17:00 Pm Est. Rfq Responses Must Be Submitted Via Email With Rfq #36c24124q0413 In The Subject Line To: Nathan.langone@va.gov Hand Deliveries Shall Not Be Accepted. (xvi) The Poc Of This Solicitation Is Nathan Langone (nathan.langone@va.gov)