Ppe Tenders

Tender Id: RFI/PPECBCT/LEASE/2024/02 | Provision Of Leasing Office Space For Ppecb Office

Tender Id: RFI/PPECBCT/LEASE/2024/02 | Provision Of Leasing Office Space For Ppecb Office

Details: Description Project Title : Completion Of Doña Felomina Building Location : Devmh Compound, Bood, Ubay, Bohol Estimated Project Cost : Php 57,000,000.00 Terms Of Reference Summary Of Works A. General Requirements I. Mobilization/demobilization • The Work Consists Of The Mobilization And Demobilization Of The Contractor’s Forces And Equipment Necessary For Performing The Work Required Under The Contract. Ii. Permits And Licenses • Process And Submit Building Permit, Structural Design Review Including Sign And Seal Of Structural Plans, Electrical Review, Analysis, Computations And Signature Of Pee On Electrical Plans, And Occupancy Permit. Iii. Temporary Facilities • Temporary Facilities Shall Be Provided During The Construction Period And Will Be Constructed Within The Hospital Compound, Which Shall Serve As The Field Office, Storage Of Materials And Bunkhouse For The Workers. The Contractor Shall Provide And Maintain Temporary Power & Lighting, Temporary Water Service & Security Within The Construction Site. Iv. Health, Safety & Environment Control (complete Ppe, Safety Equipment & Devices & Safety Accessories And Signages) V. As-built (record) Drawings & Related Documents • Submit One (1) Completed Set Of Signed And Sealed As-built Plans (whiteprint Copy) • Submit One (1) Set Of Electronic Files Of Signed And Sealed As-built Plans (cadd Editable File) • The Drawings Shall Be Supplemented With Descriptive Specification As Appropriate To Clearly Record The Exact Form And Content Of Work Described In This Specification And On The Drawings. • Maintain A Complete And Accurate Record Of All Changes Or Deviations To The Contract Documents And Shop Drawings In The Trade Contractor’s Field Office. Such Record Copy Shall Indicate The Work As Actually Constructed And Be Available For Hospital Appointed Engineer To Review. • Incorporate All Minor Revisions And Clarifications Noted Thru The Field Modification Process Which May Not Necessarily Be Shown On The Architectural Drawings Or Issued As Addenda, Bulletins, Or Change Orders. • Field Changes Shall Be Neatly And Correctly Shown On One Set Of Record Prints On A Daily Basis By The Foreman, Or Superintendent Of Each Trade; And This Set Will Act As A Record Set At Completion Of The Work And Is Intended To Be Of Assistance To The Trade Contractor In Preparing Record Documents. B. Civil Works I. Site Works • The Contractor Shall Be Responsible In Setting Out Reference Lines, Elevations (lines And Grades) Prior And During The Execution Of The Works. All References Shall Be Maintained And Protected By The Contractor At His Own Expense. Disturbed References Shall Be Restored To Its Original Position Without Extra Cost To The Healthcare Facility. Ii. Structural & Concrete Works (refer Applicable Sections On Chapter 4 Of The Nscp, For Quality Of Materials, Workmanship, Execution, Acceptance, Etc.) Ii.1. General • Provide All Labor, Materials, Equipment, Transportation, And Services Required To Complete All Work Specified Herein Indicated Or As Shown On The Drawings. • Work Includes But Is Not Limited To: B.2.1 Construction Of Elevator Shaft, Slabs, Stiffener Columns & Beams, Stairs Etc. B.2.2. Formworks & Scaffolding Ii.2. Standards • Except As Modified By Governing Codes And By Contract Documents, Comply With The Provisions And Recommendations Of The Following, Latest Edition:  Ansi American National Standards Institute  Astm American Society For Testing Of Materials  Aci American Concrete Institute  Nbcp National Building Code Of The Philippines And Its Revised Irr  Nscp National Structural Code Of The Philippines Ii.3. Concrete • Elevator Shaft, Suspended Slabs Structural Concrete – Concrete Pouring Using Concrete Strength 4,000 Psi Ready Mix Or Job Mixed Concrete Together With The Concrete Cylinder Sample For Testing Materials. • Concreting Of Stair & I-beam Gaps, Roof Beam And Concrete Countertop Sink - Concrete Pouring Using Concrete Strength 3,500 Psi Ready Mix Or Job Mixed Concrete Together With The Concrete Cylinder Sample For Testing Materials. • Stiffener Columns And Lintel Beams - Concrete Pouring Using Concrete Strength 2,500 Psi Ready Mix Or Job Mixed Concrete Together With The Concrete Cylinder Sample For Testing Materials. • Concrete Mix Shall Be Subject To Adjustment To Attain The Required Strength Or Desired Mix Consistency, Subject To Approval Of The Hospital Engineer. • Portland Cement, Type 1 • Manufactured Or River-run Run Gravel For Structural Concrete, ¾ “max Properly Graded” • Washed Sand For Structural Concrete • Water: Use Potable Water Free From Alkaline Or Deleterious Substance That May Affect The Strength Of Concrete. Use Of Rain Water Will Not Be Permitted. • All Materials Shall Be Free From Clay, Lumps Or Any Deleterious Object Or Matter That Will Impair The Strength Of Concrete. • Mixing Shall Be Thoroughly Done In A Mixer Of An Approved Size And Type To Insure A Uniform Distribution Of The Materials Throughout The Mass. • Site-mixed Concrete (job Mixed Concrete) - All Structural Concrete Shall Be Machine-mixed For At Least 1 ½ Minutes After All Materials Including Water Are In The Mixing Drum. No Hand Mixing Shall Be Allowed, Except In Case Of Emergency Of Breakdown During Pouring Operations. • Ready-mixed Concrete - Mixed And Delivered From A Plant Approved By The Project Manager, And Shall Be In Strict Compliance With The Requirements Set Forth In Astm C94. • Concrete Shall Be Placed Only After All Formworks, Materials To Be Embedded, And Preparation Of Surface Involved In The Placing Have Been Inspected And Approved By The Hospital Engineer. The Contractor Shall Provide Equipment And Shall Employ Methods That Will Minimize Separation Of Aggregates From The Concrete Mix. Concrete In Columns Shall Be Placed In One Continuous Operation. Concrete In Girders, Beams And Slabs In Superstructures Shall Be Poured In A Monolithic And Continuous Manner. No Construction Joint Shall Be Allowed On Any Part Of The Structure Without The Approval Of The Hospital Engineer. • Slump Of Concrete Shall Not Exceed 3 Inches • Placement Of Concrete Shall Be In Accordance To Standard Norms, When Using Portable Concrete Mixers. • Cure Concrete Sprinkling Water And Wetted Continuously For 7-day Period. Ii.4. Steel Reinforcements • Steel Reinforcements Shall Be Astm A615, Deformed Steel Bars, Grade 60. • Supply, Fabricate And Install Reinforcing Steel As Shown On Drawings. Placing Of Steel Reinforcements Shall Be In Accordance With Current Industry (local) Code (or Aci-347). • Secure The Reinforcements Using #16 G.i. Tie Wires. • Steel Reinforcement Shall Be Provided Together With All The Necessary Tie Wires, Spacers, Support And Other Necessary Devices. Reinforcing Steel Shall Be Accurately Cut And Bent In Accordance With The Approved Detailed Reinforcement Drawings. The Hospital Engineer May Require The Contractor To Prepare And Submit Bar Cutting Schedule Prior To Fabrication Of Reinforcing Steel Bars. • Steel Reinforcements Shall Be Free From Mill Scales, Rusts, Oils, Contamination That Will Impair The Bonding Property To Concrete. Ii.5. Formworks • All Forms Shall Be Designed By The Contractor For A Safe Construction Activity And Installed To Dimensions Shown On The Drawings. • Use Phenolic Boards On Formworks With Shoring Supports. • Forms Shall Be Used Whenever Necessary To Confine The Concrete And Shape It To The Required Lines And Dimensions, Or To Protect The Concrete From Contamination. Forms Shall Have Sufficient Strength To Withstand The Pressure Resulting From Placement And Vibration Of The Concrete, And Shall Be Maintained Rigidly In Correct Position. Forms Shall Be Sufficiently Tight To Prevent Loss Of Mortar From The Concrete. • Stripping Of Forms Shall Only Commence After The Concrete Has Gained Sufficient Strength (min Of 7 Days) For Major Structural Elements. Ii.6. Structural Steel And Metal Works (refer Chapter 5 Of The Nscp) • Materials Steel And Metals For The Works Shall Meet The Requirements Of Astm A36, Hot-rolled Shapes And Plates. • All Steels Shall Be Primed With Epoxy-based Paint With -2- Finish Coats, Grey Colored Paint, Color Sample Must Be Submitted To Architect’s/engineer’s For Approval. Substrate Preparation Shall Meet The Requirements Of The Applicable Clauses Of The Steel Structures Painting Council, For Industrial Type Of Construction. All Surfaces Shall Be Free From Mill Scale, Rusts, Oils Or Any Contaminants Detrimental To Adhesion Of Paint. • Welding Works Shall Be In Accordance With Structural Welding Code (american Welding Society-d1.1, Latest Edition). Welding Electrodes Shall Be E6013 And E6012, Minimum, Meeting The Requirements Of Aws A.5. All Welders Shall Meet The Qualifications Under The Aws Codes And Standards. • All Works Under This Item Shall Be Subject To Verification By The Engineer Prior To Commencement Of Fabrication. Contractor Is To Submit Shop Drawings For Architect’s/engineer’s Review Prior To Execution. • Roof Framing Roof Framings/rafters Shall Be Constructed, Erected, And Properly Anchored To The Roof Beams Or Columns As Indicated In Drawings. Ii.7. Steel Ramp Modification • Work Includes But Is Not Limited To: - Areas As Specified On Supplied Drawings - Removal And Reinstallation Of Steel Decking - Removal, Modification, And Re-installation Of Steel Ramp To New Location (w/ Chemical Bolt) - Scaffoldings Ii.8. Gravitational Hazards • Fall Prevention Is Required In Situations With Possibility Of A Fall Or 2 Meters Or Higher. Adequate Provisions Such As Barricades, Nets, Cover, Rails, Etc. Shall Protect The Workers On The Roof, On Scaffolds And Or Elevated Platforms. • All Work Platforms, Suspended Or Otherwise, Shall Conform To Statutory Regulations. • All Working Platforms Shall Be Closely Boarded, Planked Or Constructed In Metal Decking. • Strip Formworks And The Like (timber, Plank, Plywood, Etc.) Shall Not Be Used As A Stage For Working Platform. • Defective Scaffolds Shall Not Be Used. • Bamboos Or Bamboo Poles Are Not Allowed Or Permitted To Be Used On Site. • All Deep Excavations Shall Be Provided With Adequate Safety Railings And No Materials Or Equipment Shall Be Stored As Close To The Excavation Edge. • Buildings Under Construction Where The Height Is Above 15 Meters Shall Be Provided With Peripheral Overhead Protection. Except For The Designated Entrance/exit Point, Other Areas At Ground Level Shall Be Guarded From Inadvertent Entry. At Building Entry/exit Points, Adequate Overhead Protection Shelters Shall Be Provided To Ensure A Safe Means Of Access And Egress To The Workers Workplace. C. Architectural Works Furnish Materials And Labor And All Incidentals Necessary For The Completion Of All Architectural Works Shown On Drawings And As Herein Specified. I. Moisture Protection – Cold Fluid Applied Waterproofing • Work Includes But Is Not Limited To: C.1.1. Waterproofing Of All Toilet Floors C.1.2. Waterproofing Of Roof Deck • Project Conditions: C.1.3. Proceed With Waterproofing Operations Only After Substrate Construction And Penetrating Work Have Been Completed. C.1.4. Proceed With Waterproofing Operations Only When Existing And Forecast Weather Conditions Will Permit Work To Be Performed In Accordance With Manufacturer’s Recommendations. • Product: C.1.5. Single-component, Bitumen-modified, Polyurethane Based Liquid Membrane Material, Self-bonding To Substrates And Compounded Specifically For Application And Slope Of Substrate Indicated, Minimum 60 Dry Mils (1.50mm Thick). Provide Membrane Tested By The Manufacturer To Comply With The Requirements Of Astm C 836. C.1.6. Product Should Specifically Show By Laboratory Test Result That It Complies With Astm C 8365 Requirement For Extensibility After Heat Aging Test, Minimum 6.4mm No Cracking Test For Extensibility After Heat Aging Is Astm C1522. • Miscellaneous Materials: In Addition To Primary Waterproofing Materials, Provide The Following, As Required By The Manufacturer. C.1.7. Primer/filler/sealer: As Recommended By Manufacturer Or Fluid-applied Waterproofing. C.1.8. Protection Board, Flashings, Cant Strips, And Accessories: As Recommended By Manufacturer Of Waterproofing System. C.1.9. Sealant: As Per Manufacturer’s Recommended Product. • Preparation Of Substrate: C.1.10. Clean Substrate Of Projections, Irregularities, Debris, And Substances Detrimental To Work; Comply With Instructions Of Prime Materials Manufacturer. C.1.11. Install Polyurethane Sealant Cant Strips, Flashings, Support, Embedded Items, Drain Fixtures, And Similar Accessories As Shown And As Recommended By Prime Materials Manufacturer And As Necessary For Field Conditions. C.1.12. Fill Voids, Seal Joints, And Apply Bond Breakers As Recommended By Prime Materials Manufacturer. C.1.13. Prime Substrate As Recommended By Prime Materials Manufacturer. C.1.14. Mask Off Adjoining Surfaces Not To Receive Fluid-applied Waterproofing To Effectively Prevent Spillage Or Over-spray Of Liquid Materials Outside Membrane Area. • Installation: C.1.15. General: Comply With Manufacturer’s Written Installation Recommendations, Including Preparation Of Substrate Surfaces, Detail Coatings Of Joints And Planar Changes In Substrate, And Priming Of Substrates. C.1.16. Start Installation Of Waterproofing Membrane Only In Presence And With Advice Of Manufacturer’s Technical Representative And Under Weather Conditions Acceptable For Installations. C.1.17. Apply Waterproofing Membrane Material To Substrates And Adjoining Surfaces Indicated To Receive Membrane. Apply In Accordance With Manufacturer’s Recommendations To Obtain Thickness Specified And Using Applicators And Techniques Best Suited For Slope And Type Of Substrate To Which Applied. If Two-coat Application Is Required To Obtain Membrane Thickness Specified Below, Apply Second Coat Only After Initial Cost Has Cured As Recommended By Manufacturer. Apply 60 Dry Mil Thickness On Required Areas. C.1.18. Install Sheet-type Flashings And Joint Covers Were Indicated And As Recommended By Prime Materials Manufacturer. Extend Flashings Onto Perpendicular Surfaces And Other Work Penetrating Substrate To Not Less Than 300mm Beyond Finished Surface To Be Applied Over Waterproofing, Unless Otherwise Indicated On Drawings. C.1.19. Permit Membrane To Cure Under Conditions That Will Not Contaminate Or Deteriorate Waterproofing Material. Block Off Traffic And Protect Membrane From Physical Damage. C.1.20. Install Protection Course On Cured Membrane After Testing, Without Delay To Minimize Period Of Membrane Exposure. On Vertical Surfaces Comply With Waterproofing Manufacturer’s Recommendations For Adhesion Of Protection Course To Membrane. C.1.21. Provide Concrete Wear Slab Covering Over Protection Board. C.1.22. In-place Testing: Before Completed Membranes On Horizontal Surfaces Are Covered By Protection Course Or Other Work, Test For Leaks As Per Manufacturer’s Recommended Procedure. Repair Any Leaks Revealed By Examination Of Substructure, And Repeat Test Until No Leakage Is Observed. Ii. Floor Finishes Ii.1. Tile Works • General: All Surfaces To Receive Tiles, Shall Be Free From Loose Plaster, Where Required, Existing Setting Mortar Bed Shall Be Stripped, Removed To Allow Proper Setting Of Tiles To Desired Finished Elevation. No Separate Payment For Trimming Existing Mortar Bed And Shall Be Deemed Included Elsewhere. • Common Areas And Offices – 60mx60cm Non-skid Ceramic Tiles. • All Toilets – 30cmx30cm Non-skid Ceramic Tiles. • Material Shall Be Subject To Review And Approval Of The Architect. Contractor To Submit Samples For Color And Texture Selection Prior To Delivery And Installation. • All Floor Cuttings On Both Ends Of The Walls Shall Be Of Equal Width. • Tile Grout Color To Match Color Of Tiles Or As Directed By The Architect. • Setting Bed Or Mortar Shall Be Dry Mixed, Sand-cement Mix With Water Added To Produce The Desired Consistency And Slurry Mix For Adhesion. Use Tile Adhesive For Areas That Are Less Than 1.5 Inches From Finish Floor Line. • All Exposed Corner Edges Shall Be Provided With Aluminum Stair Nosing. • No Human Traffic Or Construction Loads Shall Be Applied To All Newly Installed Tiles, And Allow Setting Mortar And Adhesive To Cure Prior. Ii.2. Anti-bacterial Vinyl Sheet Works • Work Includes But Is Not Limited To: C.2.1.1 3mm Anti-bacterial Vinyl Sheets With Cove And Capping – All Areas As Indicated On Drawings. • Installation Materials: - Trowelable Leveling And Patching Compounds: Latex-modified, Portland Cement Based Or Blended Hydraulic Cement-based Formulation Provided Or Approved By Resilient Product Manufacturer For Applications Indicated. - Adhesives: Water-resistant Type Recommended By Manufacturer To Suit Floor Tile And Substrate Conditions • Installation Should Be Carried In Accordance With Local Standards. Subfloor To Be Smooth, Hard, Clean And Dry Prior To Laying. • Project Condition: C.2.1.2 Maintain Temperatures Within Range Recommended By Manufacturer, But Not Less Than Deg C Or More Than 35 Deg C, In Spaces To Receive Floor Tile During The Following Time Periods: 1. 48 Hours Before Installation. 2. During Installation. 3. 48 Hours After Installation. C.2.1.3 After Post-installation Period, Maintain Temperatures Within Range Recommended By Manufacturer, But Not Less Than 13 Deg C Or More Than 35 Deg C. C.2.1.4 Close Spaces To Traffic During Floor Covering Installation. C.2.1.5 Close Spaces To Traffic For 48 Hours After Floor Covering Installation. C.2.1.6 Install Resilient Products After Other Finishing Operations, Including Painting, Have Been Completed. • Color And Patterns: C.2.1.7 Colors And Patterns: As Selected By The Healthcare Facility From Manufacturer's Full Range. • Positioning: - As Far As Possible, And Depending On The Width Of The Rolls, Seams Between Strips Should Be Kept Away From Areas Of Heavy Load. - Within Rooms, Strips Should Be Laid Towards The Main Window Or In A Lengthwise Direction. - Within Corridors, Strips Should Be Laid In The Direction Of Pedestrian Traffic Unless Otherwise Stated In The Contract Specifications. Apply The Flooring Along The Chalk Line. - Mark A Longitudinal Axis For Reference To Place Strips. - Unroll Fully Material. - Check That The Edge Of Strips Is Straight. Align The Edge Of The First Strip To Longitudinal Axis To Have A Straight Reference. - Leave A Gap Of 1 Cm Between Every Strip To Let Possible Full Material Acclimation In Its Length As In Its Width. If Area Is Too Small, It Is Possible To Overlap Fully Two Strips. Welding Joints: Leave A Space Of Max 1 Mm Between The Strips Cold Seaming: Overlap The Strips In Order To Cut Edges Flush - Let Material Relax During 24h. Material Will Be In The Best Conditions To Be Glued And Material Tensile Or Bubbles Will Be Mostly Released. • Gluing And Fitting: • This Is Done 24 Hours After Having Unrolled And Laid Out The Lengths. • The Application Is Done By Priming And Using Acrylic Emulsifying Adhesives With A Finely Toothed Spatula Or Trowel A2 Norm Tkb Or 1/16” X 1/16” X 1/16” Square Notch (1.6 Mm X 1.6 Mm X 1.6 Mm). Coverage Rate Is 300 Gr/sqm. To Achieve This Coverage, It Is Necessary To Change The Spatula Regularly. Important: • Forbid Any Trafficking For 48 Hours After Laying As Well As Any Furniture Movement. • Follow Carefully The Recommendations Of The Adhesive Manufacturer. • Closely Follow The Adhesive Manufacturer’s Instructions With Particular Regard To Its Waiting Time (the Interval Between Application Of Adhesive And Laying Of Flooring). • Room Temperature And Humidity, Sub-floor Absorption And Adhesive Coverage Are Important In Order To Achieve Perfect Adhesion. Fold Back Half Of The Strips When Applying Glue To The Floor • Rolling Out: • Rolling Out Should Be Done In Two Stages: 1. Manually, Using A Cork Smoothing Press 2. By Rolling Over The Entire Surface With A 50kg Roller When Installation Is Complete. Stage 1: Pressing Down Manually Stage 2: Using A 50kg Roller • Trimming The Edge: - Use Of Coving As A Skirting System. • Welding: - Heat Welding Requires A Small Gap 1 Mm Max To Be Left Between The Sheets During The Gluing Process. Cold Welding Requires Perfectly Straight Edges. Employ An Overlap Cutting Method During The Gluing Process. • Putting Into Service – Allowing Traffic: After Installation: • For Normal Pedestrian Traffic, Allow 48 Hours • Before Moving Or Installing Furniture, Allow 72 Hours Ii.3. Resinous Floor Coating System Works • Work Includes But Is Not Limited To: C.2.3.1. Self-levelling Epoxy Floor Coating System (ff-4) – Of Stairs 01 And Fire Exit Stairs As Indicated On Drawings; C.2.3.2. Rubberized Floor Coating System (ff-5) – Of Ramp And Landing As Indicated On Drawings. • Product: C.2.3.3. Performance Requirements: Self-levelling Epoxy Floor Coating System (ff-4) – Abrasion-, Impact-, And Chemical Resistant, And Resin-based Monolithic Floor Surfacing Designed To Produce A Seamless Floor. Rubberized Floor Coating System (ff-5) – A Rubberized Coating Product That Is One Step, Self-priming For Use On Concrete, Metal And All General Surfaces. It Is Fast Drying And Has Excellent Resistance To Water, Weather, Oil, Acid And Other Chemicals. It Is Formatted Using A Modified Non-chlorinated Formula That Is Nontoxic And Ozone Safe. Low-emitting Materials: Flooring System Shall Comply With The Testing And Product Requirements Of The California Department Of Public Health's (formerly, The California Department Of Health Services') "standard Method For The Testing And Evaluation Of Volatile Organic Chemical Emissions From Indoor Sources Using Environmental Chambers." C.2.3.3. Preparation: Preferred Surface Profile Is Semi-rough Plaster Finish And Leveled. When Concrete Floor Finish Is Smooth, Mechanical Grinding Is Recommended. Dust Off With Broom Or Best Use Vacuum Cleaner To Rid Sand Dust. Surface Should Be Adequate Dry, Free From Dirt And Other Contaminants Prior To Paint Application. Repair Damaged And Deteriorated Concrete According To Resinous Flooring Manufacturer's Written Instructions. Patching And Filling: Use Patching And Fill Material To Fill Holes And Depressions In Substrates According To Manufacturer's Written Instructions. Control Joint Treatment: Treat Control Joints And Other Nonmoving Substrate Cracks To Prevent Cracks From Reflecting Through Resinous Flooring According To Manufacturer's Written Instructions. C.2.3.3. Application: A. Apply Components Of Resinous Flooring System According To Manufacturer's Written Instructions To Produce A Uniform, Monolithic Wearing Surface Of Thickness Indicated. B. Primer: Apply Primer Over Prepared Substrate At Manufacturer's Recommended Spreading Rate. C. Reinforcing Membrane: Apply Reinforcing Membrane To Substrate Cracks. D. Self-leveling Body Coats: Apply Self-leveling Slurry Body Coats In Thickness Indicated For Flooring System. E. Grout Coat: Apply Grout Coat, Of Type Recommended By Resinous Flooring Manufacturer, To Fill Voids In Surface Of Final Body Coat. F. Topcoats: Apply Topcoats In Number Indicated For Flooring System And At Spreading Rates Recommended In Writing By Manufacturer And To Produce Wearing Surface Indicated. Ii.4. Floor Tile Works • All Service Areas As Indicated On Drawings – 30cmx30cm Polished Non-skid Ceramic Tiles. • All Toilets – 30cmx30cm Glossy/polished Ceramic Tiles. • Cuttings On Both Ends Of The Walls Shall Be Of Equal Width With The Floor Finish. • All Exposed Corner Edges Shall Be Provided With Pvc Tile Trims. • No Human Traffic Or Construction Loads Shall Be Applied To All Newly Installed Tiles, And Allow Setting Mortar And Adhesive To Cure Prior. Iii. Wall & Ceiling Finishes Iii.1. Wall Tile Works • All Service Areas As Indicated On Drawings – 30cmx60cm Polished Non-skid Ceramic Tiles. • All Toilets – 30cmx60cm Glossy/polished Ceramic Tiles. • Cuttings On Both Ends Of The Walls Shall Be Of Equal Width With The Floor Finish. • All Exposed Corner Edges Shall Be Provided With Pvc Tile Trims. • No Human Traffic Or Construction Loads Shall Be Applied To All Newly Installed Tiles, And Allow Setting Mortar And Adhesive To Cure Prior. Iii.2. Painting Works • Paint Materials And Samples Swatches Shall Be Approved By The Architect. • Examine Substrate And Conditions Under Which Painting Will Be Performed. Proceed With The Work Only When Conditions Are Satisfactory. • Do Not Paint Over Dirt, Rust, Scale, Grease, Moisture, Scuffed Surfaces, Or Conditions Otherwise Detrimental To Formation Of A Durable Paint Film. • Clean Surfaces To Be Painted Before Applying Paint Or Surface Treatments. Remove Oil And Grease Prior To Mechanical Cleaning. Program Cleaning And Painting So That Contaminants From Cleaning Process Will Not Fall Into Wet, Newly-painted Surfaces. • Perform Preparation And Cleaning Procedures In Accordance With Paint Manufacturer’s Instructions And As Herein Specified, For Each Particular Substrate Condition. • Ferrous Metals: Clean Non-galvanized Ferrous-metal Surfaces That Have Not Been Shop Coated; Remove Mortar, Plaster, Grease, Dirt, Rust, Loose Mill Scale And Other Foreign Substances By Solvent Or Mechanical Cleaning Methods That Comply With The Recommendations Of The Steel Structures Painting Council, Before Priming Coat Is Applied. Iii.3. Painting Systems Iii.3.1. Exterior Surfaces: • Concrete, Concrete Masonry, Rendered Smooth • Concrete Neutralizer – One (1) Coat, Dry For 6 Hours. • Putty Surface Imperfections, Hairline Cracks With Patching Compound Using Putty Knife • Prime – Two (2) Coats Flat Latex, Dry For Two (2) Hours. • Topcoat – Two (2) Coats Of Semi-gloss Latex, Two (2) Hours Interval Between Coats. • Thinning / Clean-up Solvent – Water • Application – By Brush, Roller, Or Airless Spray Iii.3.2. Interior Surfaces: • Concrete, Concrete Masonry, Rendered Smooth • Concrete Neutralizer – One (1) Coat, Dry For 6 Hours. • Putty Surface Imperfections, Hairline Cracks With Patching Compound Using Putty Knife. • Prime – Two (2) Coats Flat Latex, Dry For Two (2) Hours. • Topcoat – Two (2) Coats Of Semi-gloss Latex, Two (2) Hours Interval Between Coats. • Thinning / Clean-up Solvent – Water • Application – By Brush, Roller, Or Airless Spray Iii.3.3. Ceiling & Drywall Surfaces: • Repair Surface Imperfections With Putty Using Putty Knife, Dry For 2 Hours And Sand. • Apply Mesh Tape On Board Joints And Seal Gaps With Patching Compound. Dry For Two (2) Hours And Sand. • Primer – Flat Latex, Dry For Two (2) Hours. • Topcoat – Two (2) Coats Of White Flat Latex Paint, Two (2) Hours Interval Between Coats. • Thinning / Clean-up Solvent - Water • Application – By Brush, Roller, Or Airless Spray Iii.3.4. Cabinetries, Closets, Counters, Doorjambs And Doors: • Primer: One (1) Coat Of Lacquer Primer Surfacer • When Necessary, Putty Surface Imperfections, Hairline Cracks With Lacquer Spot Putty Using Putty Knife. Dry For 4 Hours And Sand. • Primer: One (1) Coat Of Lacquer Primer Surfacer • Topcoat – Two (2) Coats Of Automotive Lacquer Paint Finish, One (1) Hour Interval Between Coats. • Thinning / Clean-up Solvent – Lacquer Thinner • Application – By Airless Spray Iii.3.5. Structural & Architectural Steel: For Stair Railings: • Unpainted Galvanized Surfaces That Have Been Exposed For 6 Months Or More Need Not Be Etched. • Primer: Epoxy Primer Red Oxide • Topcoat (2-3 Coats): Epoxy Enamel – Black, Gloss Finish • Dry Time: Touch (2-3 Hours), Recoat (8-12 Hours) • Thinning Solvent: Epoxy Reducer • Application: By Brush Or Spray For Roof Framing: • Unpainted Galvanized Surfaces That Have Been Exposed For 6 Months Or More Need Not Be Etched. • Apply One (1) Coat Of Red Oxide Metal Primer • Apply Two (2) Coats Of Quick Drying / Semi-gloss Enamel – Silver Aluminum • Thinning/clean-up Solvent: Paint Thinner • Application: By Brush Or Roller Iv. Dry Walls & Interior Wall Claddings • Walls - Fiber Cement Board In 12.00mm X 1.2m X 2.4m • Fiber Cement Board Shall Be Stored In Elevated And Well Protected Area. Boards With Broken Edges, Lacerations Etc. Will Not Be Permitted To Be Installed. • Framing - 2”x4” 0.5mm Thick Metal Studs Spaced At 0.40m X 0.40m On Centers And 2”x4” 0.5mm Thick Metal Tracks. V. Dry Ceiling, Covelight And Drop Ceiling Claddings • Ceiling - Fiber Cement Board In 4.50mm X 1.2m X 2.4m • Fiber Cement Board Shall Be Stored In Elevated And Well Protected Area. Boards With Broken Edges, Lacerations Etc. Will Not Be Permitted To Be Installed. • Framing - On 0.40mm Thick, 19mm X 50mm Double Furring, And 0.80mm Thick, 12mmx38mm Carrying Channel With Vertical Hanger, Spaced At 0.40m X 0.40m On Centers. Vi. Rendering To Chb Or Concrete Surfaces • All Surfaces To Be Rendered Or Cement Plastered Shall Be Clean From Any Loose Material Or Contamination To Provide Strong Bond Between Plaster And The Surface. • Mix Proportion Shall Not Be Less Than 1 Part Of Cement To 4 Parts Of Screened Sand. Necessary Adjustments Shall Be Made To Provide A Strong And Consistent Mix, Free From Cracking Due To Rapid Hydration Of Plaster Mix. • Tampering Of Previously Mix Concrete Will Not Be Permitted. • All Surfaces To Receive Paint Finish Shall Be Smooth Whilst Surfaces To Receive Tiles Shall Be Rough To Provide Better Adhesion Or Bond. Vii. Doors And Windows • All Wooden Doors Shall Be Kiln Dried And Treated Flush Doors/panel Doors Ready For Installation With The Provisions For Accessories As Indicated On Drawings, Locksets, Door Keys, And Hinge Completely Operational. • All Door Jambs For Wooden Doors Shall Be Pre-fabricated 2”x6” And 2”x4” Wooden Jamb Finished With Automotive Lacquer Paint. • Glass Door (glass/glazing) – 10mm Thk. Tempered Clear Glass On 50mm X 100mm Powder - Coated Aluminum Framed Sliding Door With 2" X 6" Powder Coated Aluminum Jamb With Complete Hardware Accessories. • Glass Partitions (glass/glazing) – 6.00mm Thk. Clear Glass Fixed Glass On Powder-coated Aluminum Frame W/ Complete Hardware Accessories. • Windows (glass/glazing) – 6.00mm Thk. Clear Glass Awning Type Powder-coated Aluminum Frame W/ Complete Hardware Accessories. • All Metal Doors And Jambs – Hollow Core Metal Flush Type Swinging Door With 2" X 6" Steel Jamb – All In Paint Finish By Spray, W/ Complete Hardware And Door Accessories As Indicated On Drawings, Completely Operational. • All Doors And Jambs – Provide All Door Keys With Key Chains And Key Tags With Color And Specifications Subject For Approval Of The Healthcare Facility. Viii. Roofing • Roofing – (0.60mm Thick X 1.04m) Pre-fabricated And Pre-painted Long Span Rib-type G.i. Roof Lapping As Indicated In The Product Brochure And Be Shall Be Strictly Followed. • Roofing Shall Be Fastened Properly To The Purlins By A 2-½ Inch Tex Screw. • Apply Silicon Sealant At All Gutter And Downspout Joints. • Ridge Rolls – 0.60 Mm Thick, Prefabricated And Pre-painted. • Fascia Cover Plate – 0.50 Mm Thick, Prefabricated And Pre-painted. • Wall-end Roof Flashing, Roof Cap Flashing And Gutter – 0.60 Mm Thick, Prefabricated And Pre-painted. Ix. Specialties Ix.1. Concrete Countertop Sink • Finish – Countertop Granite Slab, 0.60x2.40mm, Full Bullnose Edge On All Areas As Indicated On Drawings • Inclusions – Countertop Backsplash And Aprons At 0.10m • Thickness – 32mm • Finish And Color – As Selected By Healthcare Facility • Do Not Use Defective Pavers That Might Be Visible Or Cause Staining In Finished Work. • Cut Unit To Provide Pattern Indicated And In A Manner That Will Provide Clean, Sharp, Unchipped Edges. Ix.2. Supply And Installation Of Built-in Cabinets And Shelves • Finish – As Indicated On Drawings • Work Includes But Is Not Limited To: - 3rd Floor Nurse Station - 3rd Floor Nurse Station - 3rd Floor Icu Nurse Station - 4th Floor Nurse Station - 3rd Floor Lounge/pantry - 3rd Floor Icu-medprep Room - 3rd Floor Nurse Station - 3rd Floor Nurse Station-medprep Room - 4th Floor Medprep Room - 4th Floor Nurse Station Sink - 4th Floor Clean Utility Sink - 4th Floor Treatment Room - Miscellaneous Ix.3. Supply And Installation Of Wall Protection Items • Finish – Subject For Approval Of Healthcare Facility - White Pvc Handrail With Aluminum Mounting Bracket - 150mm Wooden Baseboard (hallway And Lobby Only) - Wall Corner Steel Guard • Work Includes But Is Not Limited To: - All Areas As Indicated On Drawings (see Wall Protection Plan) Ix.4. Supply And Installation Of Signages • Doña Felomina Building, 4.02m X 0.92m (chrome Stainless Steel Signage) • Hospital Logo, 1.80 Dia. (stainless Steel Backlit Logo) Ix.5. Building/room Signages/wayfinding Systems Third Floor - Signages - Room Identification Sign (for Patient Rooms) - Semi Private Room 1,2,3, Ward, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Conference Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Male Doctor's Quarter, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Female Doctor's Quarter, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Clean Linen, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Medicine Preparation Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Soiled Linen/dirty Utility, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Counseling Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Male Dressing Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Female Dressing Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Lounge/pantry, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Intensive Care Unit, 6mm Thick Frosted Acrylic - Regulatory Sign With Room Label (authorized Personnel Only) - Intensive Care Unit, 6mm Thick Frosted Acrylic - Regulatory Sign With Room Label (authorized Personnel Only) - Electrical Room, 6mm Thick Frosted Acrylic - Regulatory Sign With Room Label (authorized Personnel Only) - Male Dressing Room, 6mm Thick Frosted Acrylic - Regulatory Sign With Room Label (authorized Personnel Only) - Female Dressing Room, 6mm Thick Frosted Acrylic - Regulatory Special Signs (access Ramp Sign), 6mm Thick Frosted Acrylic - Regulatory Special Signs (fire Exit Sign, Keep Door Closed), 6mm Thick Frosted Acrylic - Restroom Identification - Pwd Toilet, 6mm Thick Frosted Acrylic - Restroom Identification - Male/female Toilet, 6mm Thick Frosted Acrylic - Emergency Exit Plan, 6mm Thick Frosted Acrylic - Wayfinder Sign, 6mm Thick Frosted Acrylic - Smoke Free Building Sign, 6mm Thick Frosted Acrylic - Area Identification (sticker Mounted) - Icu Rooms 1,2,3,4,5,6, Frosted Sticker Mounted On Glass Surface - Area Identification (sticker Mounted) - Isolation Rooms 1,2, Frosted Sticker Mounted On Glass Surface - Floor Identification Wall Sign, 350mm - 3 (for 3rd Floor), Stainless Steel In Chrome Finish - Floor Identification Wall Sign, 150mm - 3 (for 3rd Floor), Stainless Steel In Chrome Finish - Floor Directory Elevator Wall Sign, Stainless Steel In Chrome Finish - Nurse Station, Acrylic Backlit Signage Fourth Floor - Signages - Room Identification Sign (for Patient Rooms) -pedia Ward 1,2,3,4,5,6,7, Infirmary Ward, Treatment Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Conference Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Lounge/pantry, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Nurse Supervisor/staff Area, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Doctor's Quarter, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Clean Linen, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Medicine Preparation Room, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Soiled Linen/dirty Utility, 6mm Thick Frosted Acrylic - Room Identification Sign (for Service Rooms) - Storage Room, 6mm Thick Frosted Acrylic - Regulatory Sign With Room Label (authorized Personnel Only) - Electrical Room, 6mm Thick Frosted Acrylic - Regulatory Special Signs (access Ramp Sign), 6mm Thick Frosted Acrylic - Regulatory Special Signs (fire Exit Sign, Keep Door Closed), 6mm Thick Frosted Acrylic - Restroom Identification - Pwd Toilet, 6mm Thick Frosted Acrylic - Restroom Identification - Male/female Toilet, 6mm Thick Frosted Acrylic - Restroom Identification - Male/female Shower Room, 6mm Thick Frosted Acrylic - Emergency Exit Plan, 6mm Thick Frosted Acrylic - Wayfinder Sign, 6mm Thick Frosted Acrylic - Smoke Free Building Sign, 6mm Thick Frosted Acrylic - Floor Identification Wall Sign, 350mm - 3 (for 3rd Floor), Stainless Steel In Chrome Finish - Floor Directory Elevator Wall Sign, Stainless Steel In Chrome Finish - Nurse Station, Acrylic Backlit Signage Ground And Second Floor - Signages - Floor Directory Elevator Wall Sign, Stainless Steel In Chrome Finish Ix.6. Supply And Installation Of Additional Stainless Steel Hand Railings • Material Specification: - Stainless Steel Stair Railings, Ss/sus 304, 2" Diameter Tubewhite Pvc - Flat Bar 1 1/2" 1 1/2" X 1/4" In Paint Finish - Miscellaneous To Complete All Works • Work Includes But Is Not Limited To: - All Areas As Indicated On Drawings - 3rd Floor To 4th Floor Ramps, Stair 01 Additional Railings, And Fire Exit Stairs Landing At Roof Deck Additional Railings Ix.7. Supply And Installation Of Rear Façade Enclosure • Work Includes But Is Not Limited To: - All Wall Areas As Indicated On Drawings (specifically On Rear Façade) • Material Specification: - Fixed Aluminum Ventilation Drainable Louvre Panelsflat Bar 1 1/2" 1 1/2" X 1/4" In Paint Finish - Manually Operable Horizontal Aluminum Louvre - Fixed Framings In Paint Finish - Miscellaneous To Complete All Works D. Plumbing Works Provide All Labor, Materials And Equipment And Perform All The Work Necessary For The Complete Execution Of All The Work As Shown On Drawings And Specified In This Specification. Scope Of Works Shall Include But Does Not Be Limited To The Following Major Items Of Work: I. Sanitary And Waterline Piping Works • Furnish And Install Complete Water Distribution System Including Incoming Supply Pipes And Connections, Pipes, Valves, Faucets, Accessories, Etc. • Storage, Delivery, Protection Before Installation And Connection Of Plumbing Fixtures (e.g., Water Closets, Sinks, Lavatories, Faucets) Trims And Toilet Accessories (robe Hook). • All Sanitary Pipes And Fittings To Be Used Shall Be Made Of Polyvinyl Chloride (pvc Pipes) Series 1000 • All Waterline Pipes And Fittings To Be Used Shall Be Made Polypropylene Random Co-polymer (ppr Pipes) • Furnish And Install Soil, Waste And Vent Systems Including Pipes, Valves, Drains, Cleanouts And Fittings. • Connections To Existing Water Supply And Existing Catch Basins. • Pressure Testing Of The Installed Water Distribution System. • Leakage Testing Of Soil, Waste, Vent, And Catch Basins And Septic Tank. • Disinfections Of Water Distribution System. • Furnish And Install All Required Consumable Materials And Materials Tube Installed. • Investigation Of All Conflicts Of This Work And Coordination With Other Trades. Ii. Plumbing Fixtures, Toilet & Sink Accessories * Submit Samples For Approval Prior To Installation" ** Faucets, Valves & Other Accessories Shall Be Japan, U.s., & E.u. Made • 21 Sets – Two-piece Water Closet (push Button, Water Saver) • 21 Sets – Wall Hung Lavatory & Semi-pedestal W/ Faucet • 19 Sets – 510x510x200x0.8 Mm Stainless Steel Single Bowl Kitchen Sink • 1 Set – 510x510x200x0.8 Mm Stainless Steel Single Bowl Foot Operated Sink W/ Faucet • 2 Sets – Wall Mount Urinal • 21 Sets – Wall-mounted, Semi-recessed Ceramic Tissue Holder • 18 Sets – Wall-mounted, Semi-recessed Ceramic Soap Holder • 11 Sets – Stainless Steel 304/brass, Faucet, 1/2" X 4", For Toilets • 2 Sets – Stainless Steel Floor Drain, 6"x6" • 18 Sets – Stainless Steel 304/brass, Faucet, 1/2" X 6", For Concrete Sink • 28 Sets – Stainless Steel 304 Robe Hook • 2 Sets – Pwd Ss304 Grab Bar (l-type) • 2 Sets – Pwd Ss304 Flip-up Bar • 2 Sets – Pwd Ss304 Urinal Grab Bar, 2 Pcs Per Set • 17 Sets – Ss 304 Towel Bar • 17 Sets – Wall Mounted Shower W/ Complete Accessories • 28 Sets – Stainless Steel Floor Drain, 6"x6" E. Fire Protection Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Fire Protection Plan And Specification. • Black Iron Pipes, Fittings, Valves And Accessories: - Bi Pipes Schedule 40 @ 6m, Seamless (also Including Drain Pipe Riser And Auto Sprinkler Riser) And All Fittings, Valves And Accessories As Indicated On Detailed Cost Estimates • Sprinkler Heads And Accessories - Pendent Type: 135 Degrees To 165 Degrees - Sidewall Type: 135 Degrees To 165 Degrees • Fire Hose Cabinets – 100ft With 65mm Dia. Hose Valve And Fire Extinguisher • Others – Hangers And Supports, Miscellaneous And Consumables (including Painting And Tagging) • Testing And Commissioning – Configuration, Testing And Commissioning, Documentation, Training And Orientation F. Electrical Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Electrical Plan And Specification And As Indicated On Detailed Cost Estimates; I. Roughing – Ins • Cable Ladder 250 X 350 X 2400 • Wire Gutter 200 X 400 X 2400 W/ Cover • Wire Gutter 100 X 200 X 2400 W/ Cover • 80mmø, 50mmø, 32mmø, 25mmø Imc Pipe • 32mmø, 25mmø, 15mmø Emt Pipe • 15mmø Emt Coupling • 15mmø Emt Connector • 20mmø Upvc Pipe, Steel Locknut, Adapter • Metal Flexible Conduit • Straight Connector 1/2" • Junction Box With Cover, Utility Box, Pull Box • Conduit Supports / Hangers • Consumables Ii. Wires And Cables • Thhn Wires - 2.0mm², 3.5mm², 5.5mm², 8.0mm², 14.0mm², 22.0mm², 38.0mm², 125.0mm², 250.0mm² Iii. Lighting Fixtures • 4" Ø Downlight, With 11w Led Bulb Recessed Mounted • 3x9w Troffer/led Panel Type Lighting Fixture • 2x18w Troffer/led Panel Type Lighting Fixture • 5m Per Set Led Strip Light, Warm White 3000k, 230v • Rechargeable Twinhead Emergency Light • 150w Led Floodlight Iv. Devices - Switches And Convenience Outlets • Single Pole Switch With Led Indicator, Flush Type Modern Series • Duplex Switch With Led Indicator Flush Type Modern Series • Triplex Switch With Led Indicator, Flush-type Modern Series • Single Pole Switch With Led Indicator, Flush Type Modern Series, 3 Way Switch • Single Universal Convenience Outlet,16a, 230v • Duplex Universal Convenience Outlet, 3 Prong Modern Series, 16a, 230v • Duplex Universal Outlet, Floor Mounted V. Panelboards And Circuit Breakers V.1. Third Floor - Main Distribution Panelboard (mdp) Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 400at/400 Af, 3p, 35 Kaic, 230 V, Mccb Branches: 2 - 250at/400af, 3p, 230 V, Mccb 1 - Space, 100af, 3p, 230 V, Mccb - Distributional Panel (dp) -3 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 250at/400 Af, 3p, 35 Kaic, 230 V, Mccb Branches: 1 - 50at/100af, 3p, 230 V, Mccb 4 - 75at/100af, 3p, 230 V, Mccb 1 - 150at/225af, 3p, 230 V, Mccb - Pacu-3 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 125at/225 Af, 3p, 35 Kaic, 230 V, Mccb Branches: 8 - 20at/100af, 3p, 230 V, Mccb 1 - 75at/100af, 3p, 230 V, Mccb 1 - 100at/100af, 3p, 230 V, Mccb - Power Panel (pp) - 3 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 75at/100af, 3p, 22 Kaic, 230 V, Mccb Branches: 18 - 20at/50af, 3p, 230 V, Mccb - Lighting Panel (lp) - 3 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 75at/100af, 3p, 22 Kaic, 230 V, Mccb Branches: 12 - 20at/50af, 3p,10 Kaic, 230 V, Mccb - Ecb - Elev, 75at, 3p, 240v In Nema 3r - Ecb - Accu, 100at, 3p, 240v In Nema 3r - Ecb - Accu, 75at, 3p, 240v In Nema 3r - Ecb - Fcu, 20at, 2p, 240v In Nema 3r V.2. Fourth Floor - Distributional Panel (dp) -4 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 250at/400 Af, 3p, 35 Kaic, 230 V, Mccb Branches: 1 - 50at/100af, 3p, 230 V, Mccb 4 - 75at/100af, 3p, 230 V, Mccb 1 - 150at/225af, 3p, 230 V, Mccb - Pacu-4 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 125at/225 Af, 3p, 70 Kaic, 230 V, Mccb Branches: 6 - 20at/100af, 3p, 230 V, Mccb 2 - 100at/100af, 3p, 230 V, Mccb 1 - 125at/225af, 3p, 230 V, Mccb - Power Panel (pp) - 4 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 75at/100af, 3p, 22 Kaic, 230 V, Mccb Branches: 18 - 20at/50af, 3p, 230 V, Mccb - Lighting Panel (lp) - 4 Assembled In Nema 1 Enclosure, Wall Mounted, Swing Dead Front, Powder Coated With Terminal Lugs In Crimping Type Ready, With Grounding Busbar Main: 75at/100af, 3p, 22 Kaic, 230 V, Mccb Branches: 18 - 20at/50af, 3p, 230 V, Mccb - Ecb - Accu, 125at, 3p, 240v In Nema 3r - Ecb - Accu, 100at, 3p, 240v In Nema 3r - Ecb - Fcu, 20at, 2p, 240v In Nema 3r G. Auxiliary Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Auxiliary Plan And Specification And As Indicated On Detailed Cost Estimates; Fire Alarm System: I. Roughing – Ins / Wires: • 40mmø – Emt Pipe, Coupling, Connector • 15mmø – Emt Pipe, Coupling, Connector • Pullbox • Metal Flexible Conduit 1/2" • Straight Connector 1/2" • Junction Box W/ Cover • Utility Box • Conduit Supports / Hangers • Miscellaneous / Consumables • 1.25mm2 Twisted Pair Ii. Equipments: • Fire Alarm Control Panel (addressable) 2 Loops • Addressable Smoke Detector • Addressable Heat Detector • Manual Pull Station • Fire Alarm Bell With Horn Strobe • Testing And Commissioning Paging System: I. Roughing – Ins / Wires: • 40mmø – Upvc Pipe, Steel Locknut, Adapter • 20mmø – Upvc Pipe, Steel Locknut, Adapter • Metal Flexible Conduit 1/2" • Straight Connector 1/2" • Pullbox • Junction Box With Cover • Conduit Supports / Hangers • Consumables • 1.25 Tf Wire Ii. Equipments: • Power Amplifier, Amplifiers, Remote Microphone, Rack, Etc.. • Ceiling Speaker • Testing And Commissioning Telephone / Lan System: • Roughing – Ins / Wires: • Cable Tray 100mm X 250mm X 2400mm • 63mmø – Pvc Pipe, Steel Locknut, Adapter • 32mmø – Upvc Pipe, Steel Locknut, Adapter • 25mmø – Upvc Pipe, Steel Locknut, Adapter • Metal Flexible Conduit 3/4" • Straight Connector 3/4" • Pullbox • Utility Box • Square Box • Conduit Supports / Hangers • Consumables • Equipments: • Data Cabinet W/ Accessories • Information Outlet Cat 6 • Patch Panel 24-port Loaded • Manage Switch 24-port • Termination Kit • Patch Cord Cat 6 • S110 Block • Utp Cat 6 4pairs • Simplex Faceplate • Duplex Faceplate • Floor Mount Duplex Faceplate Cctv System: I. Roughing – Ins / Wires: • 40mmø – Upvc Pipe, Steel Locknut, Adapter • 20mmø – Upvc Pipe, Steel Locknut, Adapter • Pullbox • Metal Flexible Conduit 1/2" • Straight Connector 1/2" • Junction Box • Conduit Supports / Hangers • Consumables • 3.5mm2 Thhn Wire • Utp Cat 6 4pairs Ii. Roughing – Ins / Wires: • Information Outlet Cat 6 • Patch Panel 24port Loaded • Switch 24port • Patch Cord Cat 6 • Nvr / Dvr Complete With Monitors And Accessories • Ip Camera Dome Type • Testing And Commissioning H. Mechanical Works To Include Fixing And Installation; Complete Accessories And Necessary Consumables; All In Accordance With Mechanical Plan And Specification And As Indicated On Detailed Cost Estimates; H.1. Ventilation & Airconditioning System: I. Aircon Supply And Installation – Third Floor: • Fcu-3f Wall Mounted Type 1.0hp • Fcu-3f Wall Mounted Type 2.5hp • Fcu-3f Wall Mounted Type 3.0hp • Ffu Fan Filter Unit 1200x600 • Accu-3f-01 24.5kw Cooling Capacity • Accu-3f-02 17.5kw Cooling Capacity • Accu-3f-04 21 Kw Cooling Capacity Ii. Aircon Supply And Installation – Fourth Floor: • Fcu-4f Wall Mounted Type 2.5hp • Accu-4f-01 22.75kw Cooling Capacity • Accu-4f-02 24.5kw Cooling Capacity • Accu-4f-03 35 Kw Cooling Capacity H.2. Refrigerant Pipe, Drain Pipe And Others: I. Refrigerant Pipe: • Copper Pipe 5/8", 3/8", 1/4" Type L, Hard Drawn, Coupling, Elbow • Copper Pipe 5/8", 3/8” Rubber Insulation 1" Thick • Copper Pipe 1/4" Rubber Insulation 3/4" Thick • Vinyl Tape White Ii. Drain Piping: • Pvc Pipe 32mm Dia. X 3mts • Pvc Pipe 32mmø X 3/4" Thick Rubber Insulation • Pvc Pipe Fittings • Neltex 100cc • Vinyl Tape Blue Iii. Electrical: • Breaker 15a, 1p W/ Nema Box • Thhn Wire #12/3.5mm • Metal Flexible 1" Dia. • Liquitite Flexible Conduit 1" Dia. Straight Conn • Liquitite Flexible Conduit 1" Dia. • Consumables Iv. Hangers And Support: • Flat Bar 3/16" X 1" • Angle Bar 2" X 2" X 1/4" • Full Thread 3/8" Dia • Anchor Bolt 3/8" Dia • Dynabolt 3/8" Dia • Epoxy Primer (gray) • Rubber Pad • Bolt, Nut And Washer 3/8" V. Others: • Silver Rod • Map Gas • Refrigerant 410a • Consumables To Complete Works H.3. Air Conditioning Duct Works: • Supply & Return Air Duct - G.i Sheet Gage 24 • Insulation - Polyolefin Insulation 25mm Thick • Dampers - Volume Damper 400x300 • Grills And Louvers - Return Air Grille 400x300 • Hangers And Support - Tdc Corner Angle - Duct Gasket - Vulcaseal - Angle Bar 1 1/2" X 1 1/2" X 3/16" - Bolt, Nut & Washer 3/8" - Full Thread 3/8" - Anchor Bolt 3/8" - Duct Tape • Others - Firestop Sealant - Filter - Consumables To Complete Works H.4 Fans & Blowers: I. Third Floor • Ef-01 Ceiling Cassette Exhaust Fan 25 Cfm, 150pa, 0.02kw, 230 V, 1 Ph, 60 Hz • Ef-02 Ceiling Cassette Exhaust Fan 80 Cfm, 150pa, 0.03kw, 230 V, 1 Ph, 60 Hz Ii. Fourth Floor • Ef-01 Ceiling Cassette Exhaust Fan 25 Cfm, 150pa, 0.02kw, 230 V, 1 Ph, 60 Hz • Ef-02 Ceiling Cassette Exhaust Fan 80 Cfm, 150pa, 0.03kw, 230 V, 1 Ph, 60 Hz • Ef-04 Ceiling Cassette Exhaust Fan 1460cfm, 0.2 Kw, 230 V, 1 Ph, 60 Ventilation Works: I. Exhaust & Supply Air Duct • 100mmø G.i Duct • 150mmø G.i Duct Ii. Hangers And Support • Vulcaseal • Flat Bar 3/16" X 1" • Bolt, Nut & Washer 3/8" • Full Thread 3/8" • Anchor Bolt 3/8" Iii. Others • Vent Cap 100mmø • Vent Cap 150mmø • Firestop Sealant • Consumables H.5. Hospital Bed Elevator Works: Elevator Technical Specifications: I. Core Offering: Elevator Type - Passenger Elevator Machinery Location - Top Of The Shaft Capacity (kg/pers) - 1600 / 21 Speed (m/s) - 1 Travel Height (m) - 11.5 Stops - 4 Front Entrances - 4 Rear Entrances - 0 Control System - Full Collective Control Simplex Ii. Shaft Construction: Shaft Size (w X D) (mm) - 2400 X 2850 Pit Height (mm) - 1300 Shaft Material - Concrete Iii. Mechanical Components & Machinery: Machinery - Gearless Machinery Ip Protection Class - Protection (ip21) Machine Output (kw) - 9 Nominal Supply Current (a) - 29.8 Starting Supply Current (a) - 35.7 Nominal Supply Current With Shaft Lighting (a) - 29.8 Starting Supply Current With Shaft Lighting (a) - 35.7 Shaft Light Type - Led Shaft Light Main Fuses (a) - 20 Power Supply, Machinery (v / Hz) - 3 X 380 / 60 Power Supply, Cabin Light (v / Hz) - 230 / 50 Power Supply Type - 3 Phase Tn-s/msw 5 Pit Ladder - With Pit Ladder Iv. Car And Doors: Car Size (wxdxh) (mm) - 1400 X 2400 X 2400 Door Opening Dimensions (wxh) (mm) - 1200 X 2100 Maintenance And Emergency Release Panel - Topmost Floor (top) Map Placed At Floor: 4 Landing Wall With Recess. Silver Brushed Stainless Steel St4afp With Anti- Fingerprint Coating (st4) I-map Side Position - A1, Side A Left V. Testing And Commissioning – During Final Inspection Vi. Warranty – Warranty Period Of One (1) Year. I. Request For Final Inspection • Contractor Shall Submit Its Written Request For A Final Inspection Of The Project To The Medical Center Chief Office At Least Seven (7) Days Prior To Project Inspection & Turn-over. J. Electrical & Civil Tools And Equipment • Digital Multimeter • Wire Cutter • Insulated Screw Drivers • Insulated Pliers • Various Masonry And Carpentry Tools • Concrete Vibrator • Welding Machine K. Technical Personnel • Registered Mechanical Engineer • Registered Electrical Engineer • Civil Engineer/architect • Foreman, Leadman • Skilled Personnel (mason, Carpenter, Electrician, Plumber) General Guidelines • All Construction Works Shall Be Undertaken By Contractor In Accordance With Existing Laws, Including The Building Code, Fire Code, Electrical And Mechanical Codes, And All Other Applicable Rules And Regulations. • The Contractor Shall Be Responsible In Setting Out Reference Lines, Elevations (lines And Grades) Prior And During The Execution Of The Works. All References Shall Be Maintained And Protected By The Contractor At His Own Expense. Disturbed References Shall Be Restored To Its Original Position Without Extra Cost To Devmh. • The Contractor Shall Carry Out The Works Properly And In Accordance With This Contract. The Contractor Shall Provide All Supervision, Labor, Materials, Plant And Equipment, Which May Be Required. • The Contractor Shall Commence Execution Of The Works On The Start Date And Shall Carry Out The Works In Accordance With The Approved Pert/cpm Network Diagram Submitted By The Contractor, As Updated With The Approval Of The Procuring Entity’s Representative, And Shall Complete The Works By The Intended Completion Date. • The Contractor Shall Be Responsible For The Safety Of All Activities On The Site. • During On-going Construction And Before The Turn-over Of The Project, Engineering & Facilities Management Staff, End-users, Twg And Bac Shall Inspect The Works Undertaken By Contractor. Hospital Engineers And End-users Discover Any Deviations By Contractor From The Approved Construction Plans, Contractor Shall Be Required To Rectify All Such Deviations, Within Such Period Required By Client. • Contractor Shall Have Full Responsibility For Any And All Damages To Existing Hospital Facilities, Utilities, And/or Any Portion Of The Hospital’s Common Area, Due To The Works Undertaken By Contractor, Whether Accidental Or Intentional. • No Variation Order Shall Be Undertaken Unless Verified By Hospital Engineer And Approved By Executive Committee. • Contractor Shall Not Cover Or Block Stub-outs (cleanouts, Water Source, Exhaust, Sewer, Drainage, Etc.) When Not Utilized. Said Stub-outs Shall At All Times Be Free Of Obstructions And Easily Accessible. • Contractor Shall Secure A Utility Tapping Permit Prior To Tapping From Utility Provision. • Electricity And Water Consumed During Construction Shall Be Charged To Contractor. • End-users Reserves The Right To Inspect The Works At Any Time. • Contractor Shall Insure And Hold Client, Its Affiliates, Officers, Directors, Stockholders, Employees, Agents, And/or Representatives, Free And Harmless From And Against Any Injury, Losses, Claims, Damages, Liabilities, Expenses, And/or Costs Of Litigation, Resulting From Or Arising Out Of The Works Undertaken By Contractor. • In Event Of Force Majeure, The Contractor Shall Rectify, Replace Or Build The Unfinished Projects When It Is Not Yet Completed And Accepted W/o Additional Cost For The Procuring Entity. • Contractor Shall Comply With The Construction House Rules Of This Hospital. Time Of Completion • The Completion Of The Project Shall Be Three Hundred (300) Calendar Days From The Date Of Effectivity.

Tender Id: RFQ/PPE/1865/2024 | The Appointment Of A Service Provider To Provide Jackets For Joshco

Tender Id: RFQ PPECB/FAC/NR07/2024 | Re-advertised | Appointment Of Qualified Deep Cleaning Service Providers For A Period Of 36 Months [3yrs] To Render Deep Cleaning To Ppecb Northern Region Mpumalanga Offices

Details: Description For The Consignment Of Drugs, Medicines And Medical Supplies At Malangas Emergency Infirmary The Local Government Unit Of Malangas, Through The Bids And Award Committee (bac), Invites Suppliers/manufactures/distributors/ To Bid For The Consignment Of Drugs, Medicines, And Medical Supplies With Consignment Request No. 2024-01 At Malangas Emergency Infirmary, Malangas, Zamboanga Sibugay Through Consignment System. Item/description: Consignment Request No. 2024-01-supply And Delivery Of Drugs, Medicines And Medical Supplies At Malangas Emergency Infirmary Approved Budget For The Contract (abc): Php. 8,000,000.00 Cost Of Bid Documents: Cost Of Bid Documents Depend On The Total Abc Of The Items To Be Bid The Schedule Of Bidding Activities Are As Follows: Activities Date Time And Venue 1. Issuance Of Bidding Documents -september 5-13, 2024 Monday-friday (8:00a.m-5:00 P.m) 2. Pre-bid Conference (open To All Prospective Bidders) -september 5, 2024 , 1:00 P.m At Conference Room, Municipal Hall, Malangas, Zambo. Sibugay 3. Submission & Receipt Of Bids -september 17, 2024 Until 12 Noon Of September 18, 2024 4. Opening And Evaluation Of Bids- September 18, 2024 At 2:00 P.m At Conference Room, Municipal Hall, Malangas, Zambo. Sibugay Item No. Description Uom 1 Acetylcysteine 200mg Sachet 2 Acetylcysteine 600mg Sachet 3 Ascorbic Acid 500mg/2ml Bottle 4 Ascorbic Acid +zinc 500mg/4.3 Capsule 5 Ascorbic Acid +zinc Syrup 60ml Bottle 6 Ascorbic Acid +zinc Syrup 120ml Bottle 7 Ascorbic Acid +zinc Drops Bottle 8 Ambroxol30mg Tablet 9 Ambroxol6mg/ml Drops Bottle 10 Ambroxol15mg/5ml Bottle 11 Amoxicillin 125mg/5ml Susp 60ml Bottle 12 Amikacin 100mg Vial 13 Ats 3,000 Iu Ampule 14 Ats 5,000 Iu Ampule 15 Betamethasone Valerate Cream 15g Tube 16 Bisacodyl 5mg Tablet 17 Budesonide+formoterol Turbuhaler Can 18 Cefaclor 50mg/ml Oral Drops Bottle 19 Cefaclor 125mg/5ml Susp Bottle 20 Cefaclor 250mg/5ml Susp Bottle 21 Calcium Gluconate 10% Sol’n 20ml Vial 22 Cefotaxime Sodium 1g Vial 23 Ceterizine 5mg/5ml Syr 60ml Bottle 24 Ceterizine 2.5mg/mldrops 15ml Bottle 25 Citicoline Sodium 250mg/ml Ampule 26 Clarithromycin 125mg/5ml 25ml Bottle 27 Clindamycin 150mg Capsule 28 Clotrimazole 10mg/g 20g Cream Tube 29 Co-amoxicla V 1.2g Vial 30 Co-amoxicla V 250mg/62.5mg Susp 60ml Bottle 31 Co-amoxicla V 125mg/31.25mg Susp 60ml Bottle 32 Dexamethasone 8mg/2ml Ampule 33 Dexamethasone+neomycin+polymycin Eye Drops Can 34 Diphenhydramine Hcl 50mg/ml Ampule 35 Dobutamine Hcl 250mg/20ml Vial 36 Domperidone 5mg/5ml Susp 60ml Bottle 37 Etoricoxib 120mg Tablet 38 Erythromycin 0.5% Eye Ointment 5g Tube 39 Esomeprazole 40mg Capsule 40 Febuxostat 40mg Tablet 41 Ferrous Sulfate 325mg Tablet 42 Ferrous Sulfate 150mg/5ml/ 60ml Bottle 43 Ferrous Sulfate + Folic Acid Tablet 44 Finasteride 50mg Tablet 45 Fluocinolone/polymycin/ Neomycin Ear Drop Can 46 Floucinonide Cream 5g Tube 47 Floucinonide Ointment 5g Tube 48 Furosemide 20mg/2ml Ampule 49 Guifenesin/ Phenyl/ Chlorpe Syrup Bottle 50 Hydrocortisone 10mg/g Cream 10g Tube 51 Hyfrocortisone 500mg Vial 52 Human Regular Insullin 100iu/ml Cart 53 Lanzoprazole 30mg Tablet 54 Levoceterizine 5mg Tablet 55 Mefenamic Acid 50mg/5ml 60ml Bottle 56 Montelukast+ Levoceterizine 10mg/5ml Tablet 57 Multivitamins + Iron Capsule 58 Multivitamins + Iron Syrup Bottle 59 Mupirocin Oint 5g Tube 60 Nystatin Oral Drops Can 61 Ofloxacin 3mg/ml Otic Drops Can 62 Orphennadrine Citrate Capsule 63 Pantoprazole 40mg Tablet 64 Paracetamol + Tramadol Hcl Tablet 65 Phenyl/chlorphe/para Tablet 66 Phenyl/chlorphe/para Syrup 60ml Bottle 67 Piperacillin + Tazabactan 4g/500mg Vial 68 Potassium Citrate 10meq Tablet 69 Pregablin 75mg Tablet 70 Ranitidine 50mg/2ml Ampule 71 Salbutamol 2mg Tablet 72 Salbutamol 1mg/ml Nebule 73 Salbutamol + Ipratropium 200mcg/1mg/ml Nebule 74 Salbutamol + Guaifenesin Syrup Bottle 75 Salmeterol + Fluticasone 25/250mcg Mdi Can 76 Silver Sulfadiazine 10mg Crm 20g Tube 77 Sodium Fusidate Oint 5g Tube 78 0.65% Sodium Chloride Nasal Spray Can 79 Tobramycin Eye Drops Bots 80 Tobramycin + Dexamethasone Eye Drops Can 81 Tranexamic Acid 500mg/5ml Ampule 82 Vitamin B1 B6 B12 Tablet 83 Zinc Oxide + Calamine Oint Sachet 84 Propofol (diprivan Vial 85 Butorphanol (ziphanol) Vial 86 Midazolam (dormicum) Vial 87 Bupivacaine Heavy (sensorcaine) Vial 88 Ropivacaine (naropin) Vial 89 Lidocaine Poly Amp Vial 90 Ketamine Vial 91 Nalbuphine (nubain) Vial 92 Fentanyl (sublimaze) Vial 93 Atracurium (tracrium) Vial 94 Acetylcysteine 200mg/ml 25ml Bot 95 Acetylcysteine 100mg/ml 3ml Amp 96 Activated Charcoal 50g** Jar 97 Activated Charcoal 100g** Jar 98 Adenosine 3mg/ml 2ml Vial 99 Albumin, Human 20% 50cc Bot 100 Amikacin 50mg/ml 2 Ml Vial 101 Amikacin 125mg/ml 2 Ml Amp 102 Amikacin 250mg/ml 2 Ml Vial 103 Amino Acid 8% W/v Sol’n For Iv Infusion 500ml Bot 104 Aminophylline 25mg/ml 10ml Amp 105 Amiodarone 50mg/ml 3ml Amp 106 Ampicillin 250mg Vial 107 Ampicillin 500mg Vial 108 Ampicillin 1g Vial 109 Ampicillin + Sulbactam 750mg Vial 110 Ampicillin + Sulbactam 1.5g Vial 111 Anti-rabies Serum (equine)200iu/ml 5ml Vial 112 Anti-tetanus Serum 1500 I.u./0.7ml Amp 113 Atracurium Besilate 10mg/ml 2.5ml Amp 114 Atropine Sulfate 1mg/ml 1ml Amp 115 Biphasic Isophane Human Insulin 70/30 100iu/ml 10ml Vial 116 Bisacodyl 5mg Supp 117 Bisacodyl 10mg Supp 118 Budesonide 250mcg/ml 2ml Neb 119 Bupivacaine Hci Sh 0.5% 5mg/ml 4ml Amp 120 Bupivacaine 5 % 10ml Amp 121 Butorphanol Tartrate 2mg/ml 1ml Amp 122 Calcium Gluconate 100mg/ml 10ml Amp 123 Carboprost 250mcg/ml 1ml Amp 124 Cefazolin 1g Vial 125 Cefepime 1g Vial 126 Ceftazidime Pentahydrate 1g Vial 127 Ceftriaxone 1g Vl W/ Diluent Vial 128 Cefuroxime 750mg Vial 129 Chlorampenicol 1g Vial 130 Chlorpheniramine Maleate 10mg/ml 1 Ml Amp 131 Ciprofloxacin 2mg/ml 100ml Vial 132 Clindamycin 150mg/ml 2ml (300mg) Amp 133 Clindamycin 150mg/ml 4ml (600mg) Amp 134 Clonidine Hci 150mcg/ml 1ml Amp 135 Cobra Anti Venom 800iu 5ml (*) Amp 136 Deferoxamine 500mg Vial 137 Dexamethasone Na Phosphate 4mg/ml 2ml Vial 138 Diclofenac Na 25mg/ml 3ml Iv/im Amp 139 Digoxin 250mcg/ml 2ml Amp 140 Diphenhydramine Hci 50mg/ml 1ml Amp 141 Dobutamine Hci 50mg/ml 5ml Amp 142 Dopamine Hci 40mg/ml 5ml Amp 143 Enoxaparin 100mg/ml 0.4ml Pfs 144 Enoxaparin 100mg/ml 0.6ml Pfs 145 Epinephrine 1mg/ml 1ml Amp Amp 146 Epoetin Alfa (recombinant Human Erythropoietin)400iu/ml 0.4ml Pfs 147 Flumazenil 100mcg/ml 5ml Amp 148 Furosemide 10mg/ml 2ml Amp 149 Gentamicin 40mg/ml 2ml Amp 150 Glucose(dextrose) 50% 50ml Vial 151 Glyceryl Trinitrate 1mg/ml 10ml (+) Amp 152 Glycerin Suppository 2g Pedia Supp 153 Glycerin Suppository 2.5g Adult Supp 154 Haloperidol 5mg/ml 1ml Amp 155 Heparin 1000iu/ml,5ml Vial 156 Heparin 5000iu/ml,5ml Vial 157 Hepatitis B Immunoglobulin 0.5ml Vial 158 Hydralazine Hci 20mg/ml 1ml Amp 159 Hydrocortisone Na 100mg Vial 160 Hydrocortisone Na 250mg Vial 161 Hydroxyethyl Starch 6% 500ml Bag 162 Hyoscine N-butyl Bromide 20mg/ml 1ml Amp 163 Ipratropium Bromide + Salbutamol 500mcg/25mg/2.5ml Resp 164 Iron Sucrose 20mg/ml 5ml Amp 165 Isoflurane 100ml Bot 166 Isosorbide Dinitrate 1mg/ml 10ml Amp 167 Isoxsuprine Hci 5mg/ml 2ml Amp 168 Ketorolac 30mg/ml 1ml Amp 169 Lidociane 2% 5ml Vial 170 Lidociane 2% 50ml Vial 171 Lidociane 2% With Epinephrine 1.8ml Carp 172 Lidociane 10% 50ml Spray Bot 173 Magnesium Sulfate 250mg/ml 20ml Vial 174 Methylergometrine Maleate 200mcg/ml 1 Ml Amp 175 Methylprednisolone 40mg Vial 176 Methylprednisolone 500mg Vial 177 Metoclopramide 5mg/ml 2ml Amp 178 Metronidazole 5mg/ml 100ml Vial 179 Monobasic Napo4+dibasic Napo4 19g+7g/118ml,133ml Bot 180 Naloxone Hci 0.4mg/ml 1ml Amp 181 Neostigmine Sulfate 500mcg/ml 1 Ml Vial 182 Nicardipine Hci 1mg/ml 2ml Amp 183 Nicardipine Hci 1mg/ml 10ml Amp 184 Norepinrphrine 1mg/ml 2ml Amp 185 Norepinrphrine 1mg/ml 4ml Amp 186 Norepinrphrine 2mg/ml, 4ml Solution For Injection Ampule Amp 187 Omeprazole 40mg W/ Diluent Vial 188 Ondansectron Hydrochloride Dihydrate 2mg/ml 4ml Amp 189 Oxacillin 500mg Vial 190 Oxytocin (synthetic) 10 Iu/ml 1ml Amp 191 Paracetamol 125mg Supp 192 Paracetamol 250mg Supp 193 Paracetamol150mg/ml 2ml Amp 194 Paracetamol 10mg/ml 100ml Vial 195 Penicillin G Benzathine 1.2 I.u Vial 196 Penicillin G Crystalline 1,000, 000 Lu Vial 197 Penicillin G Crystalline 5,000, 000 Lu Vial 198 Phenytoin 50mg/ml 2ml Amp 199 Phytomenadione 10mg/ml 1 Ml Amp 200 Piperacillin Na+tazobactam Na 4g/500mg Vial 201 Potassium Chloride 2meq/ml 20ml Vial 202 Propofol 10mg/ml 20ml Amp 203 Rabies Vaccine, Vero Cell(purifies) 2.5iu/0.5ml+diluent Vial 204 Ranitidine Hci 25mg/ml 2ml Amp 205 Regular,insulin (recombinant Dna Human)100 Iu/ml,10ml Vial 206 Rocuronium Bromide 10mg/ml 5ml Vial 207 Ropivacaine 10mg/ml 10ml Amp 208 Salbutamol 2mg/ml 2.5ml Neb 209 Sevoflurane 250ml Bot 210 Sodium Chloride 2.5meq/ml,20ml Vial 211 Sodium Bicarbonate 1meq/ml 20ml Amp 212 Sodium Bicarbonate 1meq/ml 50ml Vial 213 Suxamethonium Chloride 20mg/ml 10ml Vial 214 Terbutaline 500mcg/ml 1ml Amp 215 Tetanus Immunoglobulin 250 Iu/ml 2ml Vial 216 Tetanus Toxoid 40iu 0.5ml Amp 217 Tuberculin,purified Protein Derivative(ppd) 2 Tu/0.1ml,1ml(*) Vial 218 Tocilizumab 400mg/20ml 20ml Vial 219 Tramadol Hci 50mg/ml Amp 2ml Amp 220 Traxenamic Acid 100mg/ml 5ml Amp 221 Vancomycin 500mg Vial 222 Verapamil 2.5mg/ml 2ml Amp 223 Vitamin B1+vitamin B12+vitamin B6 100mg+100mg+1mg/ml 3ml Amp Vaccines 1 Vaccine,bcg 500mcg/ml Vial+1ml Diluent/amp 20doses Vial 2 Vaccine,bcg 100mcg/0.1ml Powder For Inj Vl+1 Ml Diluent Vial 3 Vaccine, Diptheria,tetanus ,pertussis, Hepatitis B Recombinant And Haemophilus Influenzae Type B (hib) Combined 0.5ml Vial 4 Vaccine,hepatitis B (recombinant)10mcg/0.5ml, 5ml Vial 5 Vaccine,hepatitis B (recombinant)20mcg/ml, 1ml Vial 6 Vaccine,human Papillomavirus Quadrivalent (types 6,11,16,18) 0.5ml (*) Hpv Vial 7 Vaccine,inactivated Poliomyelitis (type 1,2&3 )0.5ml Multi Doser (per Dose) Vial 8 Vaccine, Influenza, Polyvalent 0.5ml Suspension For Inj. Pfs 9 Vaccine, Influenza, Polyvalent 15mcg/0.5ml, 5ml Multidose Glass Vial (per Dose) Vial 10 Vaccine, Live Attenuated Measles, Mumps, Rubella (mmr) Multidose Vial+ Ml Diluent (10 Dose) Vial 11 Vaccine, Pneumocoaccal Conjugate Multi Dose Vial (*) Vial 12 Vaccine Pneumocoaccal Polyvalent 25mcg/0.5ml, 0.5ml, 0.5ml Single Dose Vial (*) Vial 13 Vaccine, Rabies Chick Embryo Cell 2.5 Iu Powder For Inj Vial+ 1ml Dil (purified,inactivated) Vial Fluids 1 Sterile Water For Injection, 20 Ml Ampule Amp 2 Sterile Water For Injection 50 Ml Vial 3 Sterile Water For Injection, 1 L Bot 4 Dextran, High Molecular Weight (dexran 70)+ Dextrose 6% + 5%, 500ml Bot 5 Dextrose + Sodium Chloride 5%+ 0.3%, 500ml Bot 6 Dextrose + Sodium Chloride 5%+ 0.3%, 1l Bot 7 Dextrose + Sodium Chloride 5%+ 0.9%, 500ml Bot 8 Dextrose + Sodium Chloride 5%+ 0.9%, 1l Bot 9 Balanced Multiple Maintenance Solution + Dextrose 5%,500ml (euro-ion) Bot 10 Balanced Multiple Maintenance Solution + Dextrose 5%, 1l (euro-ion) Bot 11 Balanced Multiple Maintenance Solution + Dextrose 5%, 1l (em/nm) Bot 12 Dextrose + Lactated Ringer’s 5%,500ml Bot 13 Dextrose + Lactated Ringer’s 5%,1l Bot 14 Dextrose In Water 5%,250ml Vial 15 Dextrose In Water 5%,500ml Bot 16 Dextrose In Water 5%,1l Bot 17 Dextrose In Water 10%,500ml Bot 18 Dextrose In Water 10%,1l Bot 19 Mannitol 20%,500ml Bot 20 Lactated Ringer’s 500ml Bot 21 Lactated Ringer’s 1l Bot 22 Sodium Chloride 0.9%, 50ml Bot 23 Sodium Chloride 0.9%, 100ml Bot 24 Sodium Chloride 0.9%, 500ml Bot 25 Sodium Chloride 0.9%, 1l Bot 26 Sodium Chloride 0.9%, 1l (for Irrigation) Bot 27 D50 Water 50ml Bottle 28 Magnesium Sulfate 250mg/20ml Bottle 29 Mannitol 500mg/500ml Bottle 30 Sterile Water 100ml Bottle 31 0.9% Soduim Chloride 50ml Bottle Regulated Medicines 1 Clonazepan 2mg Tab 2 Diazepam 5mg Tab 3 Diazepam 10mg In 2ml Amps 4 Ephedrine Sulfate 50mg In 1ml Amps 5 Fentanyl Citrate 50mcg/ml 2ml Amps 6 Ketamine Hci 50mg/ml 10ml Vial 7 Midazolam 5mg In 1ml Amps 8 Morphine Sulfate 10mg/ml 1ml Amps 9 Morphine Sulfate 10mg Tab 10 Nalbuphine Hci 10mg/ml 1ml Amp 11 Phenobarbital Sodium 15mg*** Tab 12 Phenobarbital Sodium 30mg*** Tab 13 Phenobarbital Sodium 60mg*** Tab 14 Phenobarbital Sodium 90mg*** Tab Oral Medicines 1 Acetylcysteine 100mg Sachet 2 Acetylcysteine 200mg Sachet 3 Acetylcysteine 600mg Tab 4 Aciclovir 400mg Tab 5 Albendazole 200mg/5ml 10ml Bot 6 Albendazole 400mg Tab X 100’s Tab 7 Alfuzosin 10mg Tab 8 Allopurinol 100mg Tab 9 Allopurinol 300mg Tab 10 Alohmgoh 225mg/200mg/5ml 60ml Susp Bot 11 Alohmgoh 200mg/100mg Tab 12 Amiodarone Hci 200mg Tab 13 Amlodipine Besilate 5mg Tab 14 Amlodipine Besilate 10mg Tab 15 Amoxicillin Drops 100mg/ml 15ml Susp Bot 16 Amoxicillin Trihydrate 250mg / 5ml 60ml Susp Bot 17 Amoxicillin 250mg Cap 18 Amoxicillin Trihydrate 500mg Cap 19 Ascorbic Acid 100mg/ml 15ml Drops Bot 20 Ascorbic Acid 100mg/5ml Syr 60ml Bot 21 Ascorbic Acid 100mg/5ml Syr 120ml Bot 22 Ascorbic Acid 500mg Tab 23 Aspirin 80mg Tab 24 Aspirin 100mg Tab 25 Atenolol 50mg Tab 26 Atenolol 100mg Tab 27 Atorvastatin 10mg Tab 28 Atorvastatin 20mg Tab 29 Atorvastatin 40mg Tab 30 Atorvastatin 80mg Tab 31 Azithromycin 200mg/5ml 15ml Susp Bot 32 Azithromycin 500mg Tab 33 Betahistine Hci 8mg Tab 34 Betahistine 16mg Tab 35 Betahistine Hcl 24mg Tab 36 Bisacodyl 5mg Tab 37 Butamirate Citrate 50mg Mr Tab 38 Calcium Carbonate 500mg Chewable Tab 39 Calcium C03+ Cholecalciferol 600mg+vit.d3 400iu Tab 40 Captopril 25mg Tab 41 Carvedilol 6.25mg Tab 42 Carvedilol 25mg Tab 43 Cefalexin Drops 100mg/ml 10ml Susp Bot 44 Cefalexin 125mg/5ml Bot 45 Cefalexin 250mg/5ml 60ml Susp Bot 46 Cefalexin 500mg Cap 47 Cefixime 20mg/ml,10ml Pedia Susp Bot 48 Cefixime100mg/5ml 60ml Susp Bot 49 Cefixime 200mg Cap 50 Cefixime 400mg Cap 51 Cefuroxime 125mg/5 Ml, 70ml Oral Suspension Bot 52 Cefuroxime Axetil 250mg/5ml 120ml Susp (*) Bot 53 Cefuroxime Axetil 500mg Tab 54 Celecoxib 200mg Tab 55 Celecoxib 400mg Cap 56 Cetirizine 2.5mg/ml Syr 10ml Drops Bot 57 Cetirizine 1mg/ml Syr 60ml Bot 58 Cetirizine Hci 10mg Tab 59 Chloramphenicol 500mg Cap 60 Chlorphenamine Maleate 4mg Cap 61 Cilostazol 100mg Tab 62 Cinnarizine 25mg Tab 63 Ciprofloxacin 500mg Tab 64 Clarithromycin 125mg/5ml 50ml Susp Bot 65 Clarithromycin 250mg/5ml 50ml Susp Bot 66 Clarithromycin 500mg Tab 67 Clindamycin 300mg Cap 68 Clonidine Hci 75mcg Tab 69 Clonidine Hci 150mcg Tab 70 Clopidogrel 75mg Tab 71 Cloxacillin Na 250mg/5ml 60ml Susp Bot 72 Cloxacillin Na 500mg Cap 73 Co-amoxiclav 200mg/28.5mg/5ml 70ml Susp Bot 74 Co-amoxiclav 400mg/57mg/5ml 70ml Susp Bot 75 Co-amoxiclav 500mg/125mg Tab 76 Colchicine 500mcg Tab 77 Cotrimoxazole 200mg/40mg/5ml Susp 70ml Susp Bot 78 Cotrimoxazole 400mg/80mg/5ml Susp 60ml Susp Tab 79 Cotrimoxazole 400mg/80mg Tab 80 Cotrimoxazole 800mg/160mg Tab 81 Dexamethasone 500mcg Tab 82 Dexamethasone 4mg Tab 83 Diclofenac 50mg Tab 84 Dicycloverine 10mg/5ml Syr 60ml Bot 85 Dicycloverine Hci 10mg Tab 86 Digoxin 250mcg Tab 87 Diltiazem Tab 88 Diphenhydramine 12.5mg/5ml Syr 60ml Bot 89 Diphenhydramine 25mg Cap 90 Diphenhydramine 50mg Cap 91 Domperidone 1mg/ml 60ml Bot 92 Domperidone 10mg Tab 93 Doxycycline 100mg Cap 94 Dydrogesterone 10mg Tab 95 Enalapril Maleate 5mg Tab 96 Enalapril Maleate 20mg Tab 97 Eperisone Hci 50mg Tab 98 Erythromycin 200mg/5ml Granules Susp(as Ethylsuccinate) 60ml Bot 99 Felodipine 5mg Mr Tab 100 Fenofibrate 160mg Cap 101 Fenofibrate 200mg Cap 102 Ferrous Sulfate 15mg Elemental Iron/0.6ml Drops Bot 103 Ferrous Sulfate 30mg Elemental Iron/5ml Syr 60ml Bot 104 Ferrous Sulfate 60mg Elemental Iron Tab 105 Ferrous Sulfate +folic Acid 60mg Elemental Iron/400mcg Tab 106 Finasteride 5mg Tab 107 Fluconazole 150mg` Cap 108 Folic Acid 2.5mg/5ml 30ml Drops Bot 109 Folic Acid 5mg/5ml 60ml Syr Bot 110 Folic Acid 5mg Cap 111 Furosemide 20mg Tab 112 Furosemide 40mg Tab 113 Gabapentin 100mg Tab 114 Gabapentin 300mg Tab 115 Gliclazide 30mg Mr Tab 116 Gliclazide 60mg Mr Tab 117 Gliclazide 80mg Tab 118 Hydroxyurea 500mg Cap 119 Hydroxyzine 2mg/ml 100ml Bot 120 Hydroxyzine 25mg Tab 121 Hyoscine N-butylbromide 5mg/5ml 60ml Bot 122 Hyoscine N-butylbromide 10mg Tab 123 Ibuprofen 100mg/5ml, 60ml Oral Suspension Bot 124 Ibuprofen 200mg/5 Ml Susp 60ml Bot 125 Ibuprofen 200mg Tablet Tab 126 Ibuprofen 400mg Tab 127 Irbesartan 150mg Tab 128 Isoniazid 200mg/5 Ml,120 Ml Syrup Bot 129 Isosorbide Dinitrate 5 Mg Sl Tab 130 Isosorbide Dinitrate 10 Mg Tablet Tab 131 Isosorbide 5 Mononitrate 30mg Mr Tab 132 Isosorbide 5 Mononitrate 60mg Mr Tab 133 Isoxsuprine Hci 10mg Tab 134 Itraconazole 100mg X 28’s Cap 135 Lactulose 3.3g/5ml 120ml Bot 136 Lagundi 300mg/5ml 60ml Bot 137 Lagundi Leaf (vitex Negundo L) 300mg Tab 138 Lagundi Leaf (vitex Negundo L) 600mg Tab 139 Levofloxacin 500mg Tab 140 Levothyroxin 50mcg Tab 141 Levothyroxin 100mcg Tab 142 Loperamide 2mg Cap 143 Loratidine 10mg Tab 144 Loratidine 5mg/5ml 30ml Syrup Bot 145 Losartan K 50mg Tab 146 Losartan K 100mg Tab 147 Losartan K + Hydrochlorothiazide 50mg/12.5mg Tab 148 Mebendazole 100mg/5ml Susp 60ml Bot 149 Mebendazole 500mg Tab Chewable Tab 150 Mefenamic Acid 250mg Cap 151 Mefenamic Acid 500mg Tab 152 Metformin 500mg Tab 153 Methotrexate 2.5mg ($) Tab 154 Methyldopa Sesquihydrate 250mg Tab 155 Methylprednisolone 4mg Tab 156 Methylprednisolone 16mg Tab 157 Metoclopramide 5mg/5ml 60ml Syr Tab 158 Metoclopramide 10mg Tab 159 Metoprolol Tartrate 50mg Tab 160 Metoprolol Tartrate 100mg Tab 161 Metronidazole 125mg/5ml Susp 60ml Bot 162 Metronidazole 500mg Tab 163 Montelukast 4mg Chewable Tab 164 Montelukast 5mg Chewable Tab 165 Montelukast 10mg Tab Tab 166 Multivitamins Drops 15ml Bot 167 Multivitamins Syr 60ml Bot 168 Multivitamins Tab 169 Naproxen Na 550 Mg Tab 170 Nifedipine 10mg Cap Cap 171 Nifedipine 30mg Mr Cap 172 Nitrofurantoin 100mg Cap 173 Nystatin 100,000 Iu 12ml Bot 174 Ofloxacin 200mg Tab 175 Omeprazole 20mg Cap 176 Omeprazole 40mg Cap 177 Oral Rehydration Salt Sachet 20.5g Sach 178 Paracetamol 100mg/ml Drops 15ml Bot 179 Paracetamol 120mg/5ml Syr 60ml Bot 180 Paracetamol 250mg/5ml Syr 60ml Bot 181 Paracetamol 500mg Tab 182 Phenoxymethylpenicillin 500mg Cap 183 Potassium Chloride 600mg Tab 184 Potassium Chloride 750mg Durules Dur 185 Prednisone 10mg/5ml 60ml Bot 186 Prednisone 5mg Tab 187 Prednisone 10mg Tab 188 Prednisone 20mg Tab 189 Propranolol Hci 10mg Tab 190 Propranolol Hci 40mg Tab 191 Prophylthiouracil 50mg Tab 192 Pyrazinamide 250mg/5 Ml,120ml Oral Susp Bot 193 Ranitidine Hci 150mg Tab 194 Ranitidine Hci 300mg Tab 195 Retinol (vitamin A) As Palmitate 100iu Cap 196 Rifampicin 200mg/5ml,120 Ml Oral Susp Bot 197 Rifampicin 150mg,inh 75mg,ethambutol 275mg Tab 198 Rifampicin 150mg,inh 75mg,ethambutol 275mg Pyra 400 Tab 199 Rosuvastatin Ca 10mg Tab 200 Rosuvastatin Ca 20mg Tab 201 Sacubitril-valsartan 50mg Tab 202 Sacubitril-valsartan 100mg Tab 203 Salbutamol 2mg/5ml 60ml Bot 204 Sambong 500mg Tab 205 Simvastatin 20mg Tab 206 Simvastatin 40mg Tab 207 Sodium Bicarbonate 650mg Tab 208 Sodium Bicarbonate 325mg Tab 209 Spironolactone 25mg Tab 210 Spironolactone 50mg Tab 211 Sucralfate 1g Tab Tab 212 Tamsulosin Hci 200mcg Cap 213 Tamsulosin Hci 400mcg Mr Fc Tab 214 Telmisartan 40mg Tab 215 Telmisartan 80mg Tab 216 Telmisartan + Hydrochlorothiazide 40mg/12.5mg Tab 217 Terbutaline 1.5mg/5 Ml Syrup,60ml Bot 218 Terbutaline 5mg Tab 219 Tramadol Hci 50mg Cap 220 Traxenamic Acid 500mg Cap 221 Trimetazidine Dihydrochloride 35mg Tab 222 Troclosene Sodium 67mg Effervescent Tab 223 Ursodeoxycholic Acid 250mg Cap 224 Valsartan + Hydrochlorothiazide 80mg/12.5mg Tab 225 Verapamil 80mg Tab 226 Vitamin B1 + Vitamin B12 + Vitamin B6 100 Mg + 5 Mg + 50 Mcg Tab 227 Zinc (equiv.to 10mg Elemental/ml),15 Ml Oral Drops Bot 228 Zinc (equiv.to 20mg Elemental Zinc/5 Ml),60ml Syrup Bot 229 Zinc 30mg Elemental Zinc Tab None Pndf Covid Meds 1 Baricitinib 4mg X 14’s Box 2 Molnupiravir 200mg Cap 3 Remdesivir 100mg Vial Creams/ointments/inhalers/antiseptics 1 Alcohol Ethyl 70% 500ml Bots 2 Budesonide + Formoterol 160/4.5mcg 60 Doses Rapihaler With Spacers Dpi Mdi 3 Betamethasone Cream 0.1% 5g Tube 4 Chlorhexidine 0.12% 120ml Bots 5 Clobetasol 0.05%, 5 G Ointment Tube Tube 6 Clotrimazole 1% 10g Cream Tube 7 Erythromycin 5%,5g Opthalmic Oint Tube 8 Fusidic Acid 2% 5g Cream Tube 9 Hydrocortisone 1%,10 G Cream Tube 10 Hydrogen Peroxide 3% (10 Volumes) 120ml Bots 11 Hypromellose Opthalmic Solution 0.3%,10ml Bot 12 Ketoconazole 2% (20mg/g) 15g Cream Tube 13 Miconazole Oral Gel 20mg/g 3.5g Tube 14 Miconazole 2% (20mg/g) 5g Cream Tube 15 Mupirocin Cream 2% W/w 15g Cream Tube 16 Neomycin (as Sulfate) + Polymixin B (as Sulfate) + Floucinolone Acetonide 3.5 Mg/10,00units/0.025%/5ml Bot 17 Ofloxacin 3mg/ml 5ml Opthalmic Drops Bot 18 Ofloxacin 3mg/ml 5ml Otic Drops Bot 19 Providone Iodine 10% 60ml Bot 20 Providone Iodine 10% 120ml Bot 21 Providone Iodine 10% , 1 Gallon Bot 22 Providone Iodine 1% Gargle 60ml Bot 23 Salbutamol 100mcg/dose X 200 Doses Mdi 24 Salmeterol 25mcg+ Fluticasone 125mcg X 120 Doses Mdi Mdi 25 Salmeterol 25mcg+ Fluticasone 250mcg X 120 Doses Mdi Mdi 26 Silver Sulfadiazine 1% 25g Tube 27 Silver Sulfadiazine 10mg/g 500g Jar Jart 28 Tiotropium 18mcg/dose W/ Appropriate Accompanying Dispenser (+) Dpi 29 Tobramycin 3mg/ml (0.3%w/v) 5 Ml Eye Drops Bot 30 Tobramycin Dexamethasone 3mg/1mg/g 5ml Eye Drops Bot Psychopharmagological Agents 1 Alprazolan 250 Mcg Tab 2 Biperidine Hci 2 Mg Tab 3 Carbamazepine 200 Mg Tab 4 Carbamazepine 10mg/5ml 120ml Syrup Bot 5 Chlorpromazine 100mg Tab 6 Chlorpromazine 200mg Tab 7 Clozapine 25mg Tab 8 Clozapine 100mg Tab 9 Divalproex Sodium (sodium Valproate + Valproic Acid) 250mg Tab 10 Divalproex Sodium (sodium Valproate + Valproic Acid) 500mg Tab 11 Escitalopram 10mg Tab 12 Fluphenazine Decanoate 25mg/ml 1ml Amp 13 Haloperidol 5mg/ml 1 Ml Amp 14 Haloperidol 5mg Tab 15 Lamotrigine 100mg Tab 16 Levodopa 100mg + Carbidopa 25mg Tab 17 Levodopa 250mg + Carbidopa 25 Mg Tab 18 Lithium Carbonate 450mg Mr Tab 19 Olanzapine 10mg Tab 20 Oxcarbazepine 60mg/ml 50ml Bot 21 Phenytoin 100mg Cap 22 Quetiapine 25mg Tab 23 Quetiapine 100mg Tab 24 Quetiapine 200mg Tab 25 Quetiapine 300mg Tab 26 Risperidone 1 Mg Tab 27 Risperidone 2 Mg Tab 28 Sertraline 50mg Tab 29 Valproic 250mg/5ml Syrup 120ml Bot 30 Divalproex Sodium (sodium Valproate + Valproic Acid)500mg Tab 31 Levitiracetam 500mg Tab Family Planning Supplies 1 Lynestrenol 500mcg X 28’s (pop) (*) Cycle 2 Etonogetrel 68mcg (progestin Sub-dermal Implant)(*) Rods 3 Medroxyprogesterone Acetate (dmpa) Vial 4 Levonorgestrel + Ethinylestradiol 150mcg/30mg(coc) Cycle Service Items Supplies 1 Aceiti De Manzanilla 25ml Bots 2 Acetone 30ml Bots 3 Baby Oil 50 Ml J&j Bots 4 Castor Oil 30ml Bots 5 Efficascent Oil 50 Bots 6 Hydrogen Peroxide 3% (10 Volumes) 500ml (6x30’s) Bots 7 Lubricating Jelly 5g Sch 8 Lubricating Jelly 7g Sch 9 Lubricating Jelly 120g Tube 10 Medicated Gauze Dressing Sheets 11 Mentholated Topical Oitment 5g Pcs 12 Permethrin 10mg/ml 60ml Shampoo Bot 13 Permethrin 50g/ml (5%) Lotion 60ml Bot 14 Sodium Chloride Nasal Drops 30cc Bot 15 Sodium Chloride Nasal Spray 30cc Bot 16 Zinc Oxide + Calamine 3.5g Sachet Medical Supplies 1 Urine Collector Pedia Box 2 Insulin Syringe 1/2cc 100’s Box 3 Stomach Tube Fr10 Pieces 4 Stomach Tube F12 Pieces 5 Stomach Tube F14 Pieces 6 Stomach Tube F16 Pieces 7 Silk 3/0 Curved Cutting 12’s Box 8 Silk 4/0 Curved Cutting 12’s Box 9 Surgical Blade #12 100’s Box 10 Specimen Cup Pieces 11 Medicine Cup Pieces 12 Micropore 3m 12’s Box 13 Leukoplast Plaster 2.5cmx5m Roll 14 Sterile Gauze Sponge 4x4 100’s Box 15 Povidone Iodine Gallon 16 Bed Pan Pieces 17 Non Sterile Gauze Pas 4x4 100’s Box 18 Gauze Roll Roll 19 Id Bracelet Pedia 100’s Box 20 Id Bracelet Adult 100’s Box 21 Aldasan Gallon 22 Tounge Depressor Box 23 Cardiograph Ecg Paper 63mm X 30 Roll 24 Grounding Pad For Cautery Adult Pieces 25 Cautery Tip Pieces 26 Cautery Pencil Pieces 27 Autoclave Paper 150mm X 100mm Pack 28 Antiseptic Betadine 10% Gallon 29 Antiseptic Betadine 7.5% Gallon 30 Alcohol 70% Gallon 31 Gauze 28x24 Mesh Box 32 Plaster Big White Box 33 Gauze 8x10.5x8ply Box 34 Viruzyme Soaking Solution Gallon 35 Suture Novosyn 3/0 Pieces 36 Suture 2’0 Pieces 37 Silk 0 Round Pieces 38 Silk Tie 3 Pieces 39 Silk Tie 2 Pieces 40 Silk (0) Tie Pieces 41 Vicryl 0 Pieces 42 Plain 2-0 Pieces 43 Polysorb 4-0 Pieces 44 Plain Cut Gut 3-0 Pieces 45 Plain Cut Gut 2-0 Pieces 46 Silk 3-0 Strands Pieces 47 Intubation Set Set 48 Intubating Stylet Fr10 Pieces 49 El Tube 7 Pieces 50 El Tube 7.5 Pieces 51 El Tube 8 Pieces 52 El Tube 8.5 Pieces 53 Suction Tip Pieces 54 Suction Set For Or Set 55 Anethesia Breathing Circuit Adult Pieces 56 Anethesia Breathing Circuit Pedia Pieces 57 Disposable Ecg Electrolodes Adult Pack 58 Abdominal Binder 8 Inch X 54 Inch Pack Sutures 1 Chromic 0 Round 76cm 40mm Pcs 2 Chromic 1 Round 75cm 40mm Pcs 3 Chromic 2- 0 Round 75cm 40mm Pcs 4 Chromic 3-0 Round 75cm 26mm Pcs 5 Chromic 4-0 Round 76cm 22mm Pcs 6 Chromic 0 Round 76cm 40mm (ordinary) Pcs 7 Chromic 1 Round 75cm 40mm (ordinary) Pcs 8 Chromic 2-0 Round75 Cm 40 Mm (ordinary Pcs 9 Chromic 3-0 Round 75cm 26mm (ordinary) Pcs 10 Chromic 4-0 Round 76cm 22mm(ordinary) Pcs 11 Chromic 0 Cutting 76cm 40mm Pcs 12 Chromic 1 Cutting 75cm 40mm Pcs 13 Chromic 2-0 Cutting 75cm 40mm Pcs 14 Chromic 3-0 Cutting 75cm 26mm Pcs 15 Chromic 4-0 Cutting 76cm 22mm Pcs 16 Monocryl 4-0 Round Pcs 17 Nylon 2-0 Round 75cm 26mm Pcs 18 Nylon 2-0 Cutting 75cm 26mm Pcs 19 Nylon 3-0 Cutting 75cm 26mm Pcs 20 Nylon 3-0 Round 75cm 26mm Pcs 21 Nylon 4-0 Cutting 75cm 26mm Pcs 22 Nylon 5-0 Cutting 75cm 19mm Pcs 23 Nylon 2-0 Round 75cm 26mm (ordinary) Pcs 24 Nylon 2-0 Cutting 75cm 26mm (ordinary) Pcs 25 Nylon 3-0 Cutting 75cm 26mm (ordinary) Pcs 26 Nylon 3-0 Round 75cm 26mm (ordinary) Pcs 27 Nylon 4-0 Cutting 75cm 26mm (ordinary) Pcs 28 Nylon 5-0 Cutting 75cm 19mm (ordinary) Pcs 29 Plain 2-0 Round 75cm 40mm Pcs 30 Plain 2-0 Round 75cm 40mm (ordinary) Pcs 31 Prolene 0 Round 75cm 40mm Pcs 32 Prolene 1 Round 100cm 40mm Pcs 33 Prolene 2-0 Round 75cm 26mm Pcs 34 Prolene 3-0 Round 75cm 26mm Pcs 35 Prolene 4-0 Round 75cm 26mm Pcs 36 Prolene 5-0 Round 75cm 26mm Pcs 37 Prolene 0 Cutting 100cm 40mm Pcs 38 Prolene 1- Cutting 100cm 40mm Pcs 39 Prolene 2-0 Cutting 75cm 26mm Pcs 40 Prolene 3-0 Cutting 75cm 26mm Pcs 41 Prolene 4-0 Cutting 75cm 26mm Pcs 42 Prolene 5-0 Cutting 75cm 26mm Pcs 43 Silk 0-round 75cm 37mm Pcs 44 Silk 1-round 76cm 31mm Pcs 45 Silk 1-0 Cutting 76cm 31mm Pcs 46 Silk 2-0-round 75cm 40mm Pcs 47 Silk 3-0 Round 75cm 26mm Pcs 48 Silk 4-0 Round 75cm 20mm Pcs 49 Silk 2-0 Cutting 75cm 26mm Pcs 50 Silk 3-0 Cutting 76cm 26mm Pcs 51 Silk 4-0 Cutting 75cm 26mm Pcs 52 Silk 2-0 Strands 75cm Pcs 53 Silk 3-0 Strands 45cm Pcs 54 Silk Thread 2-0 75 Cm Rolls 55 Silk 4-0 Strands 75cm Pcs 56 Vicryl 0-round 90cm 40mm Pcs 57 Vicryl 1-round 75cm 40mm Pcs 58 Vicryl 2-0 Round 75cm 26mm Pcs 59 Vicryl 3-0 Round 75 Cm 26mm Pcs 60 Vicryl 4-0 Round 75cm 20mm Pcs 61 Vicryl 1-cutting 75cm 36mm Pcs 62 Vicryl 2-0 Cutting 75cm 36mm Pcs 63 Vicryl 3-0 Cutting 75cm 26mm Pcs 64 Vicryl 4-0 Cutting 75cm 19mm Pcs Needles/syringes/tubings/catheters 1 Asepto Syringe Pcs 2 Aspirating Needle G19x1 Inch Pcs 3 Aspirating Needle 6.20 Pcs 4 Blood Transfusion Set Pcs 5 Butterfly Needle G.19 Pcs 6 Butterfly Needle G.21 Pcs 7 Butterfly Needle G.23 Pcs 8 Butterfly Needle G.25 Pcs 9 Dental Needle G.27 Short Teramo Pcs 10 Endotracheal Tube S.2.5 W/ Cuff Pcs 11 Endotracheal Tube S.3.0 W/ Cuff Pcs 12 Endotracheal Tube S. 3.5 W/ Cuff Pcs 13 Endotracheal Tube S.4.0 W/ Cuff Pcs 14 Endotracheal Tube S.4.5 W/ Cuff Pcs 15 Endotracheal Tube S.5.0 W/ Cuff Pcs 16 Endotracheal Tube S.5.5 W/ Cuff Pcs 17 Endotracheal Tube S.6.0 W/ Cuff Pcs 18 Endotracheal Tube S. 6.5 W/ Cuff Pcs 19 Endotracheal Tube S.7.0 W/ Cuff Pcs 20 Endotracheal Tube S.7.5 W/ Cuff Pcs 21 Endotracheal Tube S.8.0 W/ Cuff Pcs 22 Epidural Minipack Set G.18 Pcs 23 Feeding Tube Fr. 5 100cm Pcs 24 Feeding Tube Fr. 8 100cm Pcs 25 Feeding Tubr Fr.10 Pcs 26 Foley Cath. Fr.5 Pcs 27 Foley Cath. Fr.8 Pcs 28 Foley Cath. Fr.10 Pcs 29 Foley Cath. Fr.12 Pcs 30 Foley Cath. Fr.14 Pcs 31 Foley Cath. Fr.16 Pcs 32 Foley Cath. Fr.18 Pcs 33 Foley Cath. Fr. 16 3 Way Pcs 34 Heparin Lock X 100’s Pcs 35 Intravenous Catheter G.16 Pcs 36 Intravenous Catheter G.16 Ordinary Pcs 37 Intravenous Catheter G.18 Pcs 38 Intravenous Catheter G.18 Ordinary Pcs 39 Intravenous Catheter G.20 Pcs 40 Intravenous Catheter G.20 Ordinary Pcs 41 Intravenous Catheter G.22 Pcs 42 Intravenous Catheter G.22 Ordinary Pcs 43 Intravenous Catheter G.24 Pcs 44 Intravenous Catheter G.24 Ordinary Pcs 45 Intravenous Catheter G.26 Pcs 46 Intravenous Catheter G.26 Ordinary Pcs 47 Microset Needleless Pcs 48 Macroset Ordinary Pcs 49 Macroset W/ Luerlock Y Port Pcs 50 Microset Ordinary Pcs 51 Microset W/ Luerlock Y Port Pcs 52 Novopine 4mm Needle Pcs 53 Soluset Pcs 54 Spinal Needle G.23 Pcs 55 Spinal Needle G.25 Pcs 56 Straight Catheter Fr.16 Pcs 57 Suction Cath. Fr. 5 Pcs 58 Suction Cath. Fr. 8 Pcs 59 Suction Cath. Fr. 10 Pcs 60 Suction Cath. Fr. 12 Pcs 61 Suction Cath. Fr. 14 Pcs 62 Suction Cath. Fr. 16 Pcs 63 Suction Cath. Fr. 18 Pcs 64 Syringe Lcc X 100’s Insulin Pcs 65 Syringe Lcc X 100’s Tuberculin (1800/box) Pcs 66 Syringe 3cc X 100’s (1800/box) Pcs 67 Syringe 5cc X 100’s (1200/box) Pcs 68 Syringe 10cc X 100’s (800/box) Pcs 69 Syringe 20cc (50/box) Pcs 70 Syringe 30cc (50/box) Pcs 71 Syringe 50cc (25/box) Pcs Adhesives/tapes/plasters/stapeler 1 Plaster ½”, 1.25cm X 5m Dry Natural Adhesive Rubber Pcs 2 Plaster 1”, 2.5cm X 5m Dry Natural Adhesive Rubber Pcs 3 Plaster 2” , 5cm X 5m Dry Natural Adhesive Rubber Pcs 4 Skin Stapler Pcs 5 Surgical Tape Paper 1\2 “ Pcs 6 Surgical Tape Paper 1“ Pcs 7 Surgical Tape Paper 2 “ Pcs 8 Surgical Tape Plastic 1\2 “ Pcs 9 Surgical Tape Plastic 1 “ Pcs 10 Surgical Tape Plastic 2 “ Pcs Pcs Inhalation/gastric Tubes Supplies 1 Nasogastric Tube Fr.8 Pcs 2 Nasogastric Tube Fr.10 Pcs 3 Nasogastric Tube Fr.12 Pcs 4 Nasogastric Tube Fr.14 Pcs 5 Nasogastric Tube Fr.16 Pcs 6 Nasogastric Tube Fr.18 Pcs 7 Nasogastric Tube Silicone Fr.12 Pcs 8 Nasogastric Tube Silicone Fr.14 Pcs 9 Nasogastric Tube Silicone Fr.16 Pcs 10 Nasogastric Tube Silicone Fr.18 Pcs 11 Nebulizer Mask Adult Pcs 12 Nebulizer Mask Pedia Pcs 13 Nebulizer Tubing Pcs 14 Oxygen Cannula Adult Pcs 15 Oxygen Cannula Neonate Pcs 16 Oxygen Cannula Pedia Pcs 17 Oxygen Face Mask Adult Pcs 18 Oxygen Face Mask Neonate Pcs 19 Oxygen Face Mask Pedia Pcs 20 Non-rebreating Face Mask Adult Pcs 21 Non-rebreating Face Mask Pedia Pcs Orthopaedic Supplies 1 Armsling Small Pcs 2 Armsling Medium Pcs 3 Armsling Large Pcs 4 Arm Splint Nb Pcs 5 Arm Splint Xs Pcs 6 Arm Splint S Pcs 7 Arm Splint M Pcs 8 Arm Splint L Pcs 9 Arm Splint Xl Pcs 10 Clavic Brace S Pcs 11 Clavic Brace M Pcs 12 Clavic Brace L Pcs 13 Cervical Collar Xs 20cm-25cm Pcs 14 Cervical Collar S Pcs 15 Cervical Collar M Pcs 16 Cervical Collar L Pcs 17 Elastic Bandage 2x5 Pcs 18 Elastic Bandage 3x5 Pcs 19 Elastic Bandage 4x5 Pcs 20 Elastic Bandage 6x5 Pcs 21 Leg Splint S Pcs 22 Leg Splint M Pcs 23 Leg Splint L Pcs 24 Leg Splint Xl Pcs 25 Ortho Surgical Gloves 7.5 X 40’s/box Pair 26 Plaster Of Paris 4x5 Pcs 27 Plaster Of Paris 6x5 Pcs 28 Prolene Mesh 3x6 Pcs 29 Prolene Mesh 35.6cm 30mm Pcs 30 Wadding Sheet 4x5 Pcs 31 Wadding Sheet 6x5 Pcs Surgical Supplies/gauze/draines/ Bags/ Containers 1 Colostomy Bag W/ Wafer 45mm (set) Pcs 2 Colostomy Bag W/ Wafer 60mm (set) Pcs 3 Colostomy Bag W/ Wafer 70mm (set) Pcs 4 Jackson Pratt Drain Pcs 5 Penrose Drain 1/4 Pcs 6 Penrose Drain 1/2 Pcs 7 Penrose Drain 1 Pcs 8 Specimen Bottle 60ml Pcs 9 Specimen Bottle 30ml Pcs 10 Sterile Gauze Swab 24x28 Mesh (8ply) 4”x4”x1 Pcs 11 Sterile Square Pack 12 X 12 X 12ply Pack 12 Sterilized Gauze Pad 4x8x5’s 20/box Pack 13 Sterilized Gauze Pad 4x8x10’s 10/box Pack 14 Stop Cock 3 Way (50/box) Pcs 15 Suction Poole Drain W/ Connecting Tube, Yunkuer Pcs 16 Surgical Blade #10 Pcs 17 Surgical Blade #11 Pcs 18 Surgical Blade #15 Pcs 19 Surgical Blade #20 Pcs 20 Surgical Blade #22 Pcs 21 Surgical Razor X 100’s/box Pcs 22 Surgical Scrubs Brush With Providone Iodine Pcs 23 Umbilical Cord Clamp Pcs 24 Under Pad X 10’s (120/box) Pcs 25 Urine Bag Pcs 26 Urinal Female (plastic) Pcs 27 Urinal Male (plastic) Pcs 28 Wee Bag Pcs 29 Wide Mouth Plastic Container 250cc Pcs 30 Wide Mouth Plastic Container 500cc Pcs 31 Wide Mouth Plastic Container 750cc Pcs Dental Supplies 1 Dental Bib Pack 2 Paper Towel Roll 3 Toothpaste Sachet 4 Toothbrush Adult Pcs 5 Toothbrush Pedia Pcs 6 Spore Clear Disinfectant Gal 7 Sterilizing Pouch 89mm X 229mm Bxs 8 Sterilizing Pouch 134mm X 254mm Bxs Ob/gyne Supplies 1 Intra Uterine Device (iud) Pc 2 Male Condom X 3’s Ultrathin Pack Covid/respiratory Supplies/ppe 1 Disposable Clean Gloves Medium X 100’s Box 2 Disposable Clean Gloves Large X 100’s Box 3 Disposable Gloves, Vynil Non-sterile, Powder-free,s,100s Box 4 Face Mask 3 Ply W/ Earloop X 50s Box 5 Gown,cover All Hazmat Suit Pc 6 Gown, Disposable Pc 7 Gown,impermeable Pc 8 Mask N95,ffp2 Pc 9 Sterile Surgical Gloves 6 X 50’s/box Powder Free Box 10 Sterile Surgical Gloves 6.5 X 50’s/box Powder Free Box 11 Sterile Surgical Gloves 7 X 50’s/box Powder Free Box 12 Sterile Surgical Gloves 7.5 X 50’s/box Powder Free Box 13 Sterile Surgical Gloves 8x 50’s/box Powder Free Box 14 Surgical Cap (2000/box) Pcs 15 Safety Goggles Pc 16 Shoe Cover,100/pack Pc 17 Face Shield Pc 18 Alcohol Isopropyl 70%,500ml Pump Bot 19 Alcohol Isopropyl 70% Gal Gal 20 Bathroom Tissue, 2 Ply Roll 21 Bathroom Scale Unit 22 Bp Apparatus Portable Manual Set Pcs 23 Covid-19 Rapid Antigen Test Kit X 25’s/box Pcs 24 Infrared Ear Thermometer ,digital Pc 25 Infrared Non Contact Thermometer (for The Head) Unit 26 High Flow Nasal Cannula Pc 27 Medical Gas Cylender,portable For Oxygen, Fitted With The Valve And A Pressure And Flow Regulator Unit 28 Nebulizer Machine Unit 29 Oxygen Concentrator 1l Unit 30 Oxygen Concentrator 3l Unit 31 Oxygen Concentrator 5l Unit 32 Oxygen Concentrator 10l W/ Accessories Unit 33 Oxygen Mask W/ Connection Tube, Reservoir Bag And Valve High Concentration Adult And Pediatric,non Sterile, Single Use Pc 34 Pulse Oximeter Pedia Unit 35 Pulse Oximeter Adult Unit 36 Pulse Oximeter Fingertip Unit 37 Pulse Oximeter Pedia Portable Handheld With Cable And Sensor Unit 38 Ventilator Portable Unit 39 Ventilator Transport For Adult And Pediatric With Breathing Circuits And Patient Interface Unit Thoraracic Supplies 1 Ctt Bottle Set W/ Fitings & Rubber Tubing ¼ X 1/16 X 2m’ Pcs 2 Rubber Tubing ¼ X1/16x50meters Box 3 Tracheostomy Tube Cuffed With Inner Cannula S.6 Pcs 4 Tracheostomy Tube Cuffed With Inner Cannula S.7 Pcs 5 Tracheostomy Tube Cuffed With Inner Cannula S.7.5 Pcs 6 Tracheostomy Tube Cuffed With Inner Cannula S.8 Pcs 7 Thoracic Cath. S.20 Pcs 8 Thoracic Cath. S.24 Pcs 9 Thoracic Cath. S.28 Pcs 10 Thoracic Cath. S.32 Pcs 11 Thoracic Cath. S.36 Pcs Service Items 1 Abdominal Binder Pcs 2 Baby Wipes X 60 Sheets Pcs 3 Bath Room Tissue Roll 4 Bath Room Soap 100g Pcs 5 Breast Pump Plastic Pcs 6 Cotton 10g Pcs 7 Cotton 40g Pcs 8 Cotton 400g Pcs 9 Cotton Applicator Stick Box 10 Cotton Balls 150balls Pcs 11 Cotton Buds 108 Tips Adult Pcs 12 Cotton Buds 108 Tips Pedia Pcs 13 Diaper Adult Large X 10’s Pack 14 Diaper Adult Medium X 10’s Pack 15 Diaper Baby Extra Large Pcs 16 Diaper Baby Large Pcs 17 Diaper Baby Medium Pcs 18 Diaper Baby Small Pcs 19 Diaper New Born Pcs 20 Disposable Napkin X 4’single Pack Night Use 320mm Pack 21 Disp.napkin X 8’s Single Pack W/ Wings Pack 22 Disp.napkin X 8’s Single Pack W/ Wings Pack 23 Fever Patch Pedia X 2 Sheet 3 Pack Box 24 Maternity Napkins X 8’s Pack 25 Nasal Aspirator Pcs 26 Thermometer Digital Pcs 27 Ecg Thermal Paper 60mmx30 Roll 28 Ecg Electrodes Adult X 50’s Pcs 29 Ecg Electrodes Pedia X 100’s Pcs 30 Hearing Test Thermal Paper Rolls 31 Tongue Depressor Box 32 Soda Sorb (carbon Dioxide Absorber) Pcs 33 Guide Wire Size 3 Pcs 34 Guide Wire Size 5 Pcs 35 Guide Wire Size 8 Pcs 36 Autoclave Tape Rolls 37 Male Condom Pcs 38 Cidex Soln Metry 3.8l Box 39 M30 Diluent (mindray) Box 40 M30 E-z Probe Cleanser (mindray) Gal 41 M30 Lh Lyse (mindray) Bottle 42 M30 Rinse (mindray) Gal 43 M30 Hermatology Control (mindray) Bottle 44 Microtainer Edta 0.5ml Pack 45 Vacuum Tube Edta 2ml Pack 46 Urine Strips 100’s 4sg Box 47 Lugol’s Iodine Solution (250ml/bot) Bot 48 Microscope Slides With Frosted Edge (72’s/box) Box 49 Isotonac Diluent Box 50 Na/k/ci/ca Solution Pack (easylyte) Pc 51 Evacuated Tube (edta)(2ml) Tray 52 Hermolynac 3n Box 53 Hbaic Box 54 Rubber Tourniquet Pc Service Items 1 Black Bag Large X 10’s Rolls 2 Yellow Bag Large X 10’s Rolls 3 Green Bag Large 10’s Rolls 4 Sando Bag Small Pack Service Items 1 Nss 0.85% 500ml Bot 2 Lugol’s Iodine Solution (500ml/bot) Bot ***nothing Follows*** Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. Interested Bidders May Obtain Further Information From The Lgu Malangas And Inspect The Bidding Documents At The Office Of The Bids And Awards Committee Secretariat During Regular Office Hours. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On September 5-13, 2024. The Lgu Malangas Will Hold A Pre-bid Conference On September 5, 2024 @ 1:00 P.m At The Conference Room, Municipal Hall, Malangas, Zamboanga Sibugay, Which Shall Be Open To All Prospective Bidders. Attendance To The Pre-bid Conference Is A Must For All Suppliers. Non-attendance Signifies You Wave Your Rights To Be Informed. Bids Must Be Duly Received By The Bac Secretariat On Or Before September 17, 2024 Until 12 Noon Of September 18, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Itb Clause. Bid Opening Shall Be On September 18, 2024 @ 2:00 P.m At Conference Room, Municipal Hall, Malangas, Zamboanga Sibugay. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Consignor Must Agree The Following Terms And Conditions As Specified In The Drug Consignment Agreement: 1. The Consignor Shall Undertake To Supply Drugs, Medicines And Medical Supplies For Sale On A Consignment Basis At The Pharmacy Of The Consignee. A Consignment Order Shall Be Issued For This Purpose. The Said Consignment Order Shall Be Made An Integral Part Of This Agreement; 2. The Consignee Shall Undertake To Sell The Consigned Drugs Medicines To The Public At A Reasonable And Affordable Price; 3. Ownership And Title To The Consigned Goods Shall Remain With The Consignor. The Consigned Goods Shall Not Be Removed From The Pharmacy/store Room Of The Consignee Without Prior Written Consent Of The Consignor; 4. The Consignor Shall Be Bound To Maintain The Price Of The Consigned Goods For At Least Seven (7) Months From The Date Of The Consignment And Shall Be Applicable Within The Catchment Area Of The Consignee; 5. The Consignee Shall Be Bound To Pay Only For The Drugs And Medicines Sold. Any Expired Or Unsold Drugs And Medicines Shall Be Returned To The Consignor Every Quarter. Payment Shall Be Made Within A Month After The Monthly Inventory Taking; 6. This Agreement Shall Cover Two Deliveries, Which Shall Take Place Within A Month Reckoned From The Start Of Each Month Covered; 7. The Specific Description Of The Drugs And Medicine And Their Quantities That Must Be Delivered For Every Month Shall Be Covered By A Consignment Orders For The Initial Month Shall Be Issued At The Same Time The Agreement Is Perfected. The Consignment Orders For The Succeeding Month Must Be Issued Within The Three (3) Days Start Of Said Month; 8. Consignment Orders Are Integral Part Of The Agreement; 9. Deliveries May Be Made Directly To The Lgu-malangas In The Presence Of The Inspection Officer Or His/her Duly Authorized Representative. The Delivery And Replenishment Of Drugs And Medicines Shall Be On Monthly Basis. All Unconsumed Stocks For Each Month Shall Be Remained To The Consignee; 10. The Consignee Shall Conduct An Inventory Of Goods Consigned Every Start Of The Following Month Or At Least A Working Day Of The Following Month As The Case May Be, Whenever Necessary To Be Scheduled By The Pharmacist-in-charge, To Determine The Items Sold With The Presence Of The Inspection Committee And A Representative From Commission On Audit. The Consignor May Be Observing The Inventory Taking At His Own Discretion; 11. The Consignee Shall Issue Payment Through A Check Payable To The Consignor Within One Month After The Inventory Of Goods Sold For The Previous Months Is Completed. 12. Upon The Expiration Or Earlier Termination Of The Agreement, For Breach Of Any Term Or Condition, The Consignee May, Upon Previous Notice/demand, Require The Consignor To Remove From The Hospital The Consigned Drugs And Medicines; 13. The Consignor Shall Hold The Consignee Free And Harmless From, And Shall Be Solely Responsible For, Any Claim, Action, Suit, And Cost Of Expenses, Damages And Liabilities Arising Out Of It, In Connection With, Or Resulting From The Use Of The Consigned Goods; 14. The Agreement Shall Have A Validity Duration Of Six (6) Months, Unless Extended With Reasonable Cause As Shall Be Justified By The Head/chief Of The Consignee; 15. A Delivery Receipt Shall Be Issued By The Consignor For Every Delivery Made To The Consignee And Shall Bear The Following Information: A. Name Of Consignor Company As Heading; B. Date Of Delivery Receipt C. Delivery Receipt No. D. Consignment Order No. Covered E. Name Of Authorized Representative Of The Consignor Affecting The Delivery F. Item No. G. Description Of The Article -generic Name -dosage Form -strength -batch No/lot No -manufacturing Date -expiration Date -sub-packaging Unit H. Quantity I. Unit J. Unit Price K. Total Price 16. The Delivery Receipt Must Be Supported With A Certificate Of Analysis Coming From The Quality Control Department Of The Manufacturer Reflecting Therein The Same Batch/lot Number Covered In The Delivery Receipt. The Same Batch/lot Numbers Must Appear On The Invoices For The Billing Purposes. 17. No Items Shall Be Received Which Expiration Dates Are Less Than Twelve (12) Months From The Date Of The Delivery. Any Consigned Items Which Expiration Is Led Than That Prescribed Hereon Shall Be Immediately Invoiced And Return To The Consignor For Immediate Replacement. A Return Invoice (invoice Receipt Of Property) Shall Be Issued To This Effect Stating Therein The Specific Description And Quantity Of The Items And The Reason For Their Return; 18. Consigned Goods May Be Subjected To Random Sampling And Testing By The Bureau Of Food And Drugs (bfad) Through An Authorized Doh Representative Or Bfad Inspector During Deliveries And The Corresponding Items Retained And Tested By The Bfad Shall Be Promptly Replaced By The Consignor Without Cost To The Government; 19. Any Loss Arising From The Fortuitous Event Shall Render The Consignee Free From Any Responsibility. However, In Case Of Lose Arising From Pilferage And Theft, The Consignee Shall Be Liable For The Monetary Value Of Goods Lost Or Stolen. 20. To Ensure Quality Of Supplied Drugs, Medicines And Medical Supplies, It Is Required From The Suppliers/bidders To Submit License To Operate (lto) As Drug Distributor And Certificate Of Product Registration (cpr) Issued By The Philippine Food & Drug Administration. The Lgu Malangas Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Victor L Laguna, Rce Meo/bac Chairman Date Of Advertisement: August 28-september 4, 2024

Tender Id: RFQ/PPECB-LAB/Equip/2024/04_OLD | Supply, Delivery, And Installation Of Equipment

Tender Id: RFQ/PPECB-LAB/DESICCATOR/2024/22 | Supply And Delivery Of A Desiccator Cabinet (± 80l)

Tender Id: RFQ/PPECB-LAB/RECIRCHILLER/2024/05 | Supply, Delivery, Installation And Service Of A Recirculating Chiller

Tender Id: RFP/PPECB/OPS/PRINT/2024/04 | The Provision Of Printing Services To The Ppecb