PHILIPPINE SPORTS COMMISSION Tender

Description Specification Description Quantity Statement Of Compliance (bidders Must State Here Either “comply” Or “not Comply”) Retractable Pen  Materials: Plastic And Metal Plastic: Barrel/body Metal: Clip/tip Metal Used: Stainless Steel  Dimensions: Height: 14 Cm (+/- 0.5cm) Width/ Diameter: 2.5 Cm (+/- 0.5cm)  Nib Diameter: Medium Point 1.0 Mm Diameter  Quantity: 2,500 Pieces  Printing Method: Digital Wrap  Ink Color: Black  Clip Design: Metal Clip  Retraction Mechanism: Click Mechanism  Ink Cartridge: Ballpoint Ink Cartridge 2,500 Sets [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.]  Colors: Blue Design: Blue: # 0038a8, #2e5cb8, #2756b7 Red: # Ff2828, #253190 White: #ffffff Black Design: Black: #000000, #141414, #232323 Red: #ff2828 White: #ffffff, #595959 *submission Of Certification From The Manufacturer Or Submission Of Swatches/color Sampling To Verify That The Colors Are In Compliance With The Technical Specifications.  Features: Metal Components Such As Clips And Tips Add Durability And Premium Feel To The Pen. Medium Point Pens (1.0 Mm) Produce Standard-width Lines Suitable For Everyday Writing Tasks. Digital Wrap Printing Creates Unique Branded Items For Corporate Giveaways And Personalized Gifts. Has A Durable Metal Silver Clip For Easy Fastening To Notebooks Or Pockets, Ideal For Signature And Daily Writing Tasks. Ballpoint Ink Uses Oil-based Ink Which Dries Quickly And Is Less Prone To Smudging. Design In Black And Blue Versions. *please Note That All Items Should Not Be Retail Products Or Should Not Be Available In The Market. Requirements: • Bidders Should Have Their Physical Office, And Philgeps Registered. • Bidders Should Submit A Similar Sample Of The Above-mentioned Item During The Submission And Opening Of Bids. • Bidders Are Required To Submit Previous Government Completed Contracts Similar To The Required Item. • No Third Party Contracting / Sub-contracting. Delivery Schedule: 2,500 Sets Within 30 Calendar Days Upon Receipt Of Notice To Proceed. 50% For The First Delivery, And 100% For The Final Delivery. Technical Specifications For Customized Journal Notebook Dust Jacket Notebook And Cover Paper  Material: Matte Finish Paper  Weight/ Thickness: 100-150 Gsm  Dimensions: Height: 7.3" (+/- 0.10”) Width: 21.5" (+/- 0.10”)  Printing Method: Digital Printing  Design: Full Print Of Dust Jacket To Serve As A Cover And Poster When Expanded  Colors: Blue: #0038a8, #4a71c1, #0f5088 Red: #ce1126, #ff2828, #e16b78 White: #ffffff *submission Of Certification From The Manufacturer Or Submission Of Swatches/color Sampling To Verify That The Colors Are In Compliance With The Technical Specifications.  Features: Matte Finish Cover To Highlight The Design Of The Notebook And Comfortable To Touch. The Full Illustration (expanded) For The Dust Jacket Aims To Enhance The Notebook's Visual Appeal And Provide Information About The Branding, Which Is Promote, Support And Connect. Dust Jacket Made With Sturdy Material Allows To View The Whole Design As A Poster. Additional Details: ▫ Print The Dust Jacket Design In One Piece To Avoid Uneven Printing Of The Design On The Flaps. ▫ Flaps Are Just Folded.  Material: Binders Board  Weight/ Thickness: 2.2 Mm (+/- 0.1mm)  Dimensions: Height: 7.3" (+/- 0.10”) Width: 5.86” (+/- 0.10”)  Printing Method: Embossing  Design: Embossing Printing Adds Texture And Highlights To The Design Of The Cover.  Colors: Blue: #0038a8 *submission Of Certification From The Manufacturer Or Submission Of Swatches/color Sampling To Verify That The Colors Are In Compliance With The Technical Specifications.  Binding Method: Section Sewn The Spine Is Also Glued For Extra Support  Features: Embossed Design Enhances The Visual Appeal And Adds Tactile Experience To The Notebook. Cover Is Thick, Not Easy To Break Ensures Notebook Durability.  Material: Light To Medium Papers (standard)  Weight: 80 Gsm  Dimensions: Height: 7.3" (+/- 0.10”) Width: 5.86” (+/- 0.10”)  Ruling Color: Light Gray  Paper Color: Off-white/ Eggshell Color  Pages: 200  Features: Has A Pleasant Off-white Tone And Ink Suits Well On This Paper. The Warm Tone Of Off-white Paper Gives A Classic Look To The Notebook. Some Off-white Paper Notebooks May Be Made From Recycled/eco-friendly Materials. 2,500 Sets Designs: Dust Jacket Cover Back Front *please Note That All Items Should Not Be A Retail Product Or Should Not Be Available In The Market. Requirements: • Bidders Should Have Their Physical Office, And Philgeps Registered. • Bidders Should Submit A Similar Sample Of The Above-mentioned Item During The Submission And Opening Of Bids. • Bidders Are Required To Submit Previous Government Completed Contracts Similar To The Required Item. • No Third Party Contracting / Sub-contracting. Delivery Schedule: 2,500 Sets Within 30 Calendar Days Upon Receipt Of Notice To Proceed. 50% For The First Delivery, And 100% For The Final Delivery. Specification Description Quantity Statement Of Compliance Rubber Keychain With Ring And Carabiner End 1. Materials: • Rubber: High-quality, Durable Silicone Rubber. • Metal Components: Stainless Steel Ring And Zinc Alloy Carabiner. 2. Dimensions: (+/- 0.10”) • Length: Approximately 5 Inches (rubber) • Width: Approximately 1 Inch. • Thickness: Approximately 0.2 Inches. • Length:2 Inches (carabiner) • Width: 1.25 Inch (carabiner) • Diameter: 1.25 Inch (ring) 3. Design: • Shape: Rectangular • Texture: Smooth Surface With Raised Or Recessed Details For Branding Or Design Elements. 4. Color: • Red: Philippine Red #ce1126 Rgb 206, 17, 38 Cmyk 0, 92, 82, 19 Contrast 5.63 (aa) • Blue: Royal Azure #0038a8 Rgb 0, 56, 168 Cmyk 100, 67, 0, 34 Contrast 9.85 (aaa) *submission Of Certification From The Manufacturer Or Submission Of Swatches/color Sampling To Verify That The Colors Are In Compliance With The Technical Specifications. 5. Attachment Components: • Carabiner: 2 Inches In Length, Made Of Zinc Alloy, With A Spring-loaded Gate For Easy Attachment To Belt Loops, Bags, Or Other Accessories. Square/rectangular Type Carabiner • Ring: Diameter 1.25 Inches, Made Of Durable Metal For Attaching Keys Securely. • Rings Should Be A Thick Flat Split Ring. Black Split Ring 6. Printing/branding: • Method: Custom Design Is Embossed On The Rubber Surface. 7. Packaging:(half Of The Rubber Keychains Are Individually Packed) • Individual Packaging: Flip Top Box With Custom Foam Insert Packaging. • Bulk Packaging: Keychains Can Be Bulk Packed In Cartons For Shipping Convenience. Rubber Flag Size: 0.675 Inch (+/- 0.10”) X 1.215 Inch (+/- 0.10”) (approximate Size Proportioned To Width X Height) Design Print: Embossed With Four (4) Colors – One (1) Side Only Rubber "bida Logo" Size: 1 Inch (+/- 0.10”) X 1.535 Inch (+/- 0.10”) (approximate Size Proportioned To Width X Height) Design Print: Cut Out Embossed With Four (4) Colors - One (1) Side Only Rubber "psc Logo" Size: 1.045 Inch (+/- 0.05”) Diameter (approximate Size Proportioned To Width X Height) Design Print: Embossed With Four (4) Colors – One (1) Side Only *each Of The Rubber Logo Should Have A Small Ring To Attach From The Main Key Ring (3 Small Rings In Total) 3,000 Pieces Mock Up: *please Note That All Items Should Not Be A Retail Product Or Should Not Be Available In The Market. Requirements: • Bidders Should Have Their Physical Office, And Philgeps Registered. • Bidders Should Submit A Similar Sample Of The Above-mentioned Item During The Submission And Opening Of Bids. • Bidders Are Required To Submit Previous Government Completed Contracts Similar To The Required Item. • No Third Party Contracting / Sub-contracting. Delivery Schedule: 3,000 Pieces Within 30 Calendar Days Upon Receipt Of Notice To Proceed. 50% For The First Delivery, And 100% For The Final Delivery