Philippine National Oil Company Tender

Description I. Scope Of Work The Contractor Shall Provide All Essential Labor, Tools, Materials, And Equipment, As Well As The Requisite Supervision And Technical Expertise For The Rehabilitation Of The Existing Jetty Facility At The Pnoc Industrial Park. The Scope Of Services Includes But Not Limited To The Following: Scope Of Works 1: Retrofitting Of Piles Part A: Retrofitting By Concrete Jacketing (101 Piles) 1. Mobilization And Setting-up Of Temporary Facility 2. Conduct Pile Cleaning In All The Existing Steel Piles That Need To Be Retrofitted. (see Attached Plan). 3. Removal Of Existing Fiber-reinforced Polymer (frp) On Steel Piles For Retrofitting. 4. Remove Existing Anti-corrosion Agents And Clean From Rust All Existing Steel Members. 5. Enlargement Of Steel Piles By Incorporating A Concrete Mix, Alongside The Use Of Marine-grade And Glass Fiber-reinforced Polymer (gfrp) As Vertical Bars. (see Detail Of Concrete Jacketing On Attached Plans) 6. After The Curing Process Of Reinforced Concrete Piles, Apply Petrolatum Tape To The Piles To Prevent Corrosion 7. Installation Of New Frp. 8. Housekeeping And Proper Disposal Of Generated Waste Material. Part B: Retrofitting By Steel Plate Patching And Replacement Of New Frp (120 Piles) 1. Conduct Pile Cleaning In All The Existing Steel Piles That Need To Be Retrofitted. (see Attached Plan). 2. Removal Of Existing Fiber-reinforced Polymer (frp) On Steel Piles For Retrofitting. 3. Remove Existing Anti-corrosion Agents And Clean From Rust All Existing Steel Members. 4. Patch And Repair Damaged Underwater Piles Using Steel Plates. (see Detail On The Attached Plan). 5. Installation Of New Fiber-reinforced Polymer (frp) 6. Application Of New Anti-corrosion Agent For All Steel Members. 7. Housekeeping And Proper Disposal Of Generated Waste Material. Scope Of Works 2: Repair Of Pile Caps 45 Units (line H-k) See Attached Key Plan 1. Chipping And Removal Of Loose Concrete. 2. Cleaning/removal Of Loose Rust. 3. Application Of Corrosion-resistant Agents/coating On Exposed Rebar. 4. Application Of Concrete Epoxy On Pile Cap With Cracks 5. Application Of Epoxy Putty On Concrete Spalling. 6. Housekeeping And Proper Disposal Of Generated Waste Material. Scope Of Works 3: Replacement Of New Rubber Leg Fender 1. Supply, Delivery, And Installation Of One (1) Assembly Of Brand-new Rubber Leg Fenders Including Their Supports And Accessories (see Detail On Material Requirements). 2. Removed And Recover Existing Fender And Haul To Pnoc Staging Area. 3. Set-up Support To Install New Rubber Fender. 4. Ensure Correct Alignment Of The Newly Installed Brand-new Rubber Leg Fender. 5. Housekeeping And Proper Disposal Of Generated Waste Material.