Philippine Heart Center Tender

Description Itb No.034.25- Telemetry Monitoring Devices 21 Units Tmn80 With Batteries 20 Units Bp 10 With Case 1. Description Of Function A System That Allows Continuous Cardiac Monitoring Of An Ambulatory Adult And Pediatric Patients. 2. Operational Requirements System Complete With All Accessories As Specified In The Technical Specifications Below. 3. Technical Specifications A. Transmitters/monitors And Sets Of Central Monitoring Station 1.ecg 1.1 Provides Up To 8 Leads Ecg Waveforms 1.2 Supports 3 – 6 Leads Ecg Cables 1.3 Able To Recognize Abnormal Rhythms, Leads Off And Produce A Subsequent Alarm 1.4 Hr Detection From 30 – 300 Beats Per Minute 1.5 Simulation Analysis Of At Least 4 Leads (user-defined) 1.6 Qrs Detection 2. Spo2 2.1 Transmitted From Either Finger Or Skin Probe 2.2 Range: 0 – 100% 2.3 Accuracy: 70 – 100% 2.4 Perfusion Indicator Range: 0.05 – 20% 2.5 Pr Detection From 20-300 Beats Per Minute 2.6 Pr Accuracy ± 3 Bpm 3. Nibp 3.1 Parameters: Systolic, Diastolic And Mean 3.2 Range: Systolic: Low 25mmhg±5mmhg; High 290mmhg±5mmhg Diastolic: Low 10mmhg±5mmhg; High 210mmhg±5mmhg Mean: 15mmhg – 270mmhg 3.3 Cuff Inflation Time: 30 – 120 Seconds 3.4 Modes: Manual And Automatic 3.5 Interval In Automatic Mode: From 5 Minutes Up To 480 Minutes 3.6 Accuracy: ± 5mmhg 3.7 Method: Oscillometric 3.8 With Variable Cuff Sizes Fit For Adult Patients 3.8.1 Small Adult 2 Pcs/unit 3.8.2 Regular Adult 2 Pcs/unit 3.8.3 Large Adult 2 Pcs/unit 3.8.4 Extra-large Adult 2 Pcs/unit 4. Transmission 4.1 To Operate At Industrial Standard Wi-fi 2.4ghz/5ghz Compatible With Phc Network 4.2 Distance Range Of At Least 500 Meters 4.3 With Secure Data Transmission 5. Battery 5.1 Rechargeable Lithium-ion Battery 5.2 Charging Time: Up To 12 Hours 5.3 Full Charge Running Time: 36-48 Hours 5.4 With Overcharge Protection 5.5 Battery Status Indicator 5.6 Charging Dock For Transmitter Units 5.7 Extra 2 Batteries Per Unit 6. Physical Attributes 6.1 Lcd Screen Diagonal Measuring 50 – 100mm 6.2 At Least 480 Pixels X 320 Pixel Resolution 6.3 Touchscreen 6.4 Displays Patient’s Details (i.e. Name, Hospital Number, Room/bed Number) 6.5 Displays At Least 2 Wave-forms And 3 Numerical Parameters 6.6 Display Lock On/off System 6.7 Built-in Device Positioning System 6.8 Audible And Visual Alarms For Parameters Abnormalities, Battery Status, Out Of Range 6.9 With Alarm Lamp And Speaker 6.10 With 1.2 – 1.5 Meters Drop Protection 6.11 Waterproof, With An Ingress Protection Eating Of Not Lower Than Ipx7 6.12 With Built-in Nurse Call Button 6.13 Dimension: 120-140mm(h) X 60-90mm(w) X 20-40mm(d) 6.14 Weight: 200-900g (including Battery) 6.15 With Water Resistant Sling Pouch 6. Physical Attributes 6.1 Lcd Screen Diagonal Measuring 50 – 100mm 6.2 At Least 480 Pixels X 320 Pixel Resolution 6.3 Touchscreen 6.4 Displays Patient’s Details (i.e. Name, Hospital Number, Room/bed Number) 6.5 Displays At Least 2 Wave-forms And 3 Numerical Parameters 6.6 Display Lock On/off System 6.7 Built-in Device Positioning System 6.8 Audible And Visual Alarms For Parameters Abnormalities, Battery Status, Out Of Range 6.9 With Alarm Lamp And Speaker 6.10 With 1.2 – 1.5 Meters Drop Protection 6.11 Waterproof, With An Ingress Protection Eating Of Not Lower Than Ipx7 6.12 With Built-in Nurse Call Button 6.13 Dimension: 120-140mm(h) X 60-90mm(w) X 20-40mm(d) 6.14 Weight: 200-900g (including Battery) 6.15 With Water Resistant Sling Pouch 4. Power Supply 4.1 Power Input To Be 220vac, 60hz, Single Phase, Power Plug Must Be Compatible To Phc Outlet 5. Environmental Factors 5.1 The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0-50deg C And Relative Humidity Of 15-90% 5.2 The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 Deg C And Relative Humidity Of Less Than 70% 5.3 Shall Meet Iec-60601-1-2 :2014(or Equivalent Bis) General Requirements Of Safety For Electromagnetic Compatibility Or Should Comply With 89/366/eec; Emc-directive. 6. Standards, Safety And Training 6.1 Manufactures/supplier Should Have Iso 13485 Certificate To Quality Standard. 6.2 Should Be Philippine Fda Approved Product 6.3 Ce, Ul Or Bis Approved Product 6.4 Comprehensive Technical Training For Phc Biomed And User’s Training To Staff For Familiarity With The System. 6.5 Electrical Conforms To Standards For Electrical Safety Iec 60601-1 General Requirements (or Equivalent International/national Standard) 6.6 Warranty /parts And Services 6.6.1 Comprehensive Three (3) Years Warranty On Equipment, Parts And Services Inclusive Of Quarterly Preventive Maintenance 6.6.2 Five (5) Years Availability Of Spare Parts In The Market 6.7 Provision Of A Loaner Unit Within 24 Hours When A Unit Becomes Defective And For Repair Within The Warranty Period 7. Documentation 7.1 User/technical/maintenance Manuals To Be Supplied In English And Must Provide Hard And Soft Copy Upon Delivery 7.2 Issuance Of Certificate Of Calibration And Inspection During Scheduled Preventive Maintenance 7.3 List Of Important Spare Parts And Accessories With Their Part Number And Costing 7.4 Logbook With Instructions For Maintenance Checklist (daily, Weekly, Monthly & Quarterly). Job Description Of Hospita Technician And Company Service Engineer Should Be Clearly Stated. 7.5 List Of Equipment Available For Providing Calibration And Routine Maintenance Support As Per Manufacturer Documentation In Service/technical Manual 7.6 Schedule Of Quarterly Preventive Maintenance To Be Given Upon Delivery