Philippine Heart Center Tender

Description Itb No.044.25- 2 Units Transport Monitor With Defibrillator 1. Description Of Function This Is Attached To The Patient As Ordered His/her Stay In The Unit To Determine His/her Hemodynamic Status. This Gives The Health Team Accurate Assessment Of The Patient Necessary For Effective Intervention. . Operational Requirement System Complete With All Accessories As Specified In The Technical Specifications Below. 3. Technical Specifications 3.1 Biphasic Technology 3.2 Data Storage For At Least 24 Hours 3.3 Color Lcd Screen; At Least 6.5 – 7.5 Inches Display; Minimumresolution Of 640 X 480 Pixels 3.4 Monitoring Parameters:ecg, Spo2, Nibp And Capnography 3.4.1 Electrocardiogram (ecg) 3.4.1.1 Support 3 – 6 Lead Ecg Cables 3.4.1.2 Able To Recognize Abnormal Rhythms, Leads Offand Produce A Subsequent Alarm 3.4.1.3 Hr Detection From 30 – 300 Beats Per Minute 3.4.1.4 Simultaneous Analysis Of At Least 4 Leads (user Defined) 3.4.1.5 Qrs Detection 3.4.2 Pulse Oximetry (spo2) 3.4.2.1 Transmitted From Either Finger 3.4.2.2 Range:0 - 100% 3.4.2.3 Accuracy:70 - 100% 3.4.2.4 Perfusion Indicator Range: 0.05 - 20% 3.4.2.5 Pr Accuracy + 3 Bpm 3.4.3 Non Invasive Blood Pressure 3.4.3.1 Parameters:systolic, Diastolic And Mean 3.4.3.2 Range: Systolic:25mmhg- 290mmhg Diastolic:10mmhg -210mmhg Mean: 15mmhg - 270mmhg 3.4.3.3 Cuff Inflation Time:30 - 120 Seconds 3.4.3.4 Modes:manual And Automatic 3.4.3.5 Interval In Automatic Mode:from 5 Minutes Up To480 Minutes 3.4.3.6 Accuracy:+5mmhg 3.4.3.7 Method:oscillometric 3.4.3.8 With Variable Cuff Sizes With Liner Fit For: A. Adult B. Neonate C. Child 3.4.3.9 Capnography: Warm-up Time Less Than 10 Seconds; Capable For Intubated Or Non-intubated Patients (accessories Provided) 3.5 Aed Mode Capability 3.6 External Pacer Capability With Available Cables Fit For Pedia Andadult 3.7 External Cable Paddles For Pedia And Adult And With Dischargebuttons 3.8 Internal Paddle Electrodes (with 2 Internal Paddles Each Unit: 1 Adult And 1 Pedia Set Paddles For Each Unit) 3.8.1 Standard Sizes For Adult (6-7.5 Cm In Diameter), Pediatric (2.5-3.5 Cm In Diameter), Neonatal 3.8.2 Handle With Discharge Button 3.8.3 Sterilizable On Steam Or Plasma 3.9 Output Energy: 2 Joules To 270; Or 2 Joules - 360; Adjustablesettings 3.10 Charge Status Indicator 3.11 Charging Time Is 5 Seconds Or Less For Energy Of 200 Joules 3.12 Defibrillation Of At Least 100 Shocks At A Minimum Of 200 Joulesat Fully Charges Battery 3.12.1 Quick Recovery Ecg Baseline At Less Than 3 Seconds 3.13 Automatic Disarm Feature 3.14 Monitoring Parameter Alarms:setting Adjustable 3.14.1 Low Or High Cardiac Rate 3.14.2 Arrhythmia 3.14.3 Low Or High Blood Pressure 3.14.4 Low Level Oxygen Saturation 3.14.5 Disconnection 3.15 Recovered Of Parameters Printed On Thermal Paper 3.16 Monitoring Cart/trolley; Wheel Caster With Brakes 3.17 Built In Handle 3.18 Can Be Mounted/hooked To Bed 4. System Configuration Accessories, Spares And Consumables 4.1 Pacer Pad Connectors 4.2 With 4 Sets Of Pacer Pads Per Unit With 2 Sets Each For Adultand Pedia 4.3 1 Pack Of 30pcs Electrodes Each For Adult And Pedia Per Unit To Be Included Upon Delivery 4.4 Thermal Paper 3 Pcs Per Unit 5. Environmental Factors 5.1 The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0-50deg C And Relative Humidity Of 15-90% 5.2 The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 Deg C And Relative Humidity Of Less Than 70% 5.3 Shall Meet Iec-60601-1-2:2014 (or Equivalent Bis) General Requirements Of Safety For Electromagnetic Compatibility Or Should Comply With 89/366/eec; Emc-directive. 6. Power Supply 6.1 Power Input To Be 220vac, 60hz, Single Phase, Power Plug Must Be Compatibleto Phc Outlet 6.2 Re-settable Over-current Breaker Shall Be Fitted For Protection 6.3 Rechargeablelithium-ion Battery Or Ni-mh; With Battery Indicatorovercharge Protection 6.4 Electrical Plug Compatible With Phc Set Socket, Providecertification 6.5 Full Charging Running Time: 36-48 Hours 6.6 Charging Time: 4-8 Hours 7. Standards, Safety And Training 7.1 Manufactures/supplier Should Have Iso 13485 Certificate Toquality Standard 7.2 Should Be Fda, Ce, Ul Or Bis Approved Product 7.3 Comprehensive Technical Training For Phc Biomed And User’s Training To Staff For Familiarity With The System 7.4 Electrical Safety Conforms To Standards For Electrical Safety Iec 60601-1 General Requirements (or Equivalent) International/national Standards 7.5 Comprehensive Warranty For 3 Years On Parts And Services And3 Years Free Quarterly Preventive Maintenance 7.6 Consumables Should Be Available For 5 Years In The Market 7.7 Delivery Of The Items Is Required By 90 Calendar Days 8. Documentation 8.1 User/technical/maintenance Manuals To Be Supplied In English In Hard And Soft Copies Upon Delivery 8.2 Laminated Quick Operational Guide Per Unit 8.3 List Of Important Spare Parts And Accessories With Their Partnumber And Costing 8.4 List Of Equipment Available For Providing Calibration And Routinemaintenance Support As Per Manufacturer Documentation In Service/technical Manual 8.5 Supplier Must Submit Notarized Certification Of Good Standing From Phc User/ Other Hospital / Health Care Facilities 8.6 Exclusive Distributorship Of Similar Project