Philippine Heart Center Tender

Description Itb No.105.24- 2 Units Radiant Warmer With Bassinet 1 Description Of Function A Bed For Stabilizing The Body Temperature Of A Newborn Or Premature Infant. It Has A Heat Source Positioned Above The Baby To Keep His Or Her Temperature Constant. Unlike An Incubator, It Is Not Enclosed 2. Operational Requirements System Complete With All Accessories As Specified In The Technical Specifications Below. 3. Technical Specifications 3.1. Features: 3.1.1 Mobile 3.1.2 Weight Capacity Is 50 – 70 Kg Including Accessories 3.1.3 The Lamp: 3.1.3.1 Capable Of Photo Therapy And Warming 3.1.3.2 Positioned At A Safe Distance Of 15-20 Inches (38-51 Cm) From The Bassinet 3.2. Specification Display: 3.2.1 Led / Lcd Display 3.2.1.1 Skin Temperature 3.2.1.2 Surface Temperature / Set Temperature 3.2.2 Button Keys For Regulation Of Temperature 3.2.3 Temperature Mode – Pre Warm, Manual And Servo 3.2.4 Temperature Range 0 – 25oc Up To 39oc 3.3. Alarms 3.3.1 Audio And Visual Alarm 3.3.1.1 For High And Low Temperature Zero – 25oc Up To 37oc 3.3.1.2 System Malfunction 3.3.1.3 Sensor / Skin Probe Disconnection 3.3.1.4 Power Failure 3.4. Bassinet 3.4.1 Size: 50 - 62 Cms X 70 – 79 Cms Depth: 7 Inches To 10 Inches Or 20.32 Cm – 25.4 Cm 3.4.2 With 2 Transparent Side Walls And 1 Front Made Of High Grade Plastic And With Close Open Mechanism 3.4.3 Bassinet/infant Bed With Manual And Adjustable Tilt Mechanism 3.4.3.1 Angle Tilt Is 0 – 13 Degrees + 12° 3.4.4 Adjustable Vertical Height: Smooth And Quiet Operation Allows Effortless Adjustment From 90 – 110 Cm From Bassinet To Floor, Ensuring Optimal Comfort And Accessibility (electronic Or Manual) 3.4.5 With Handle Bar Located Under The Bassinet 3.4.6 X-ray Tray Under The Bassinet 3.5. Mattres 3.5.1 Size: 50 – 70 Cms (square) 3.5.2 Thickness : 5.08 Cm 3.5.3 Water Proof Cover Made Of Hypoallergenic Non Toxic Material 3.6. Casters 3.6.1 4-5 Wheels; 2-3 Wheels With Lock ( 4-5 Inches In Diameter) 3.6.2 Anti Skid (rubberized) 4. System Configuration Accessories, Spares And Consumables 4.1 Accessories 4.1.1 Skin Probe 4.1.1.1 Reusable And Hypoallergenic Skin Probes (5 Pcs/unit) 4.1.1.2 Provision Of Adhesive 30 Pcs Per Unit 4.1.2 With Accessible Laminated Instruction Manual Or Quick Reference Hung At The Back 4.1.3 With Storage Bin Below The Mattress (63 Cm X 65cm) 4.2 Others 4.2.1 Monitor /syringe Pump Shelf Placed On The Side And Opposite Of The Iv Pole (shelf Size: 38 Cm X 30 Cm) 4.2.2 Iv Pole With 4 Hook Located At The Back 4.2.3 Accessories Hook Located At The Back 4.2.4 Suction With Gauge And Canister With Holder 4.2.5 With Two (2) Oxygen Tank Cylinder And Holders (size D) 4.2.6 With Built In Lighting Adjustable From Warm To Bright Light 5. Environmental Factors 5.1 The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0-50deg C And Relative Humidity Of 15-90% 5.2 The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 Deg C And Relative Humidity Of Less Than 70% 5.3 Shall Meet Iec-60601-1-2 :2001 (or Equivalent Bis) General Requirement Of Safety For Electromagnetic Compatibility, Or Should Comply With 89/366/eec; Emc-directive 6. Power Supply 6.1 With Ups Battery Module 6.2 Power Input To Be 220-240vac, 60hz Fitted With Phc Electrical Outlet 6.3 Suitable Ups With Maintenance Free Batteries For Minimum One-hour Back-up Should Be Supplied With The System 7. Standards, Safety And Training 7.1 Manufacturers/supplier Should Have Iso 13485 Certificate To Quality Standard 7.2 Should Be Fda Approved Product 7.3 Should Be Ce, Ul Or Bis Approved Product 7.4 Comprehensive Technical Training For Phc Biomed And User's Training To Staff For Familiarity With The System 7.5 Electrical Safety Conforms To Standards For Electrical Safety Iec 60601-1 General Requirements (or Equivalent International/ National Standard) 7.6 Comprehensive Warranty For 3 Years On Equipment And 5 Years Service Warranty 8..documentation 8.1 User/technical/maintenance Manuals To Be Supplied In English 8.2 Certificate Of Calibration And Inspection 8.3 List Of Important Spare Parts And Accessories With Their Part Number And Costing 8.4 Logbook For Monthly And Semestral Maintenance Checklist 8.5 List Of Equipments Available For Providing Calibration And Routine Maintenance Support As Per Manufacturer Documentation In Service / Technical Manual 8.6 Delivery Period Shall Be Within 90 Calendar Days 8.7 Certificate Of Exclusive Distributorship Or Authorized 8.8 Single Largest Completed Contract For The Last 3 Years With Or Without Bassinet