Philippine Heart Center Tender

Description Itb No. 003.25- 18 Sets Air Conditioning Units - 5b 1 Description Of Function 1.1 . Air Conditioning System/unit- Is An Inverter Type Of Air Conditioner That Use To Cool Down The Temperature In An Inside Space By Removing The Existing Heat And Moisture From The Room. Essentially They Work By Taking Warm Air Into A System And Dispensing Cold Air. Inverter Air Conditioner Have Less Power Loss That Can Save Energy By Changing Compressor Motor Speed Without Turning The Motor On And Off. 2 Operational Requirements 2.1 . System Complete With All Accessories As Specified In The Technical Specifications Below. 3 Technical Specifications Item No. Area Room Capacity Type Voltage Hz Phase Controller Feature 1 508 2.5 Inverter-wall Mounted 220-230 60 1 Wireless Voltage Protection, High Density Dust Filter With Antimicrobial Properties With Turbo Mode 2 509 2.5 Inverter-wall Mounted " " " " " 3 510 2.5 Inverter-wall Mounted " " " " " 4 511 2.5 Inverter-wall Mounted " " " " " 5 512 2.5 Inverter-wall Mounted " " " " " 6 514 2.5 Inverter-wall Mounted " " " " " 7 515 2.5 Inverter-wall Mounted " " " " " 8 516 2.5 Inverter-wall Mounted " " " " " 9 517 2 Inverter-wall Mounted " " " " " 10 517 1.5 Inverter-wall Mounted " " " " " 11 518 2 Inverter-wall Mounted " " " " " 12 518 1.5 Inverter-wall Mounted " " " " " 13 519 2.5 Inverter-wall Mounted " " " " " 14 520 2.5 Inverter-wall Mounted " " " " " 15 521 2.5 Inverter-wall Mounted " " " " " 16 522 2.5 Inverter-wall Mounted " " " " " 17 Hallway 4 Inverter-ceiling Cassette " " " " " 18 Hallway 4 Inverter-ceiling Cassette " " " " " 4 Scope Of Works 4.1. The Contractor Shall Coordinate To The Phc-emd Engineers To Conduct Actual Ocular Inspection For The Ideal Location Of All Air Conditioner Units. 4.2. The Contractor Shall Submit Detailed And Accurate Shop Drawings Prepared In Accordance With Mechanical And Electrical Code Of The Philippines And For Approval Of Phc-emd Prior To Installation. 4.3. The Contractor Shall Submit Pert/cpm To Engineering And Maintenance Division (emd) For Monitoring And Daily Works. 4.4. The Contractor Shall Apply And Secure Necessary Work Permit And Hot Work Permit Prior To Commencement Of Work. 4.5. The Contractor Shall Provide Heavy Duty Inverter Type Air Conditioner 4.6. The Contractor Shall Submit Heavy Duty Materials For Inspection And Approval By Phc-emd Prior To Installation. 4.7. The Contractor Shall Comply To The Installation Standards And Correct Specification Of Materials Prescribed By The Manufacturer In Accordance With Electrical And Mechanical Code Of The Philippines. 4.8. The Contractor Shall Perform And Provide Necessary Materials For Lay-out Of Power Supply From Electrical Room To Secondary Breaker (stainless Steel) Of Condensing Units. 4.9. The Contractor Shall Observe And Comply The Following: 4.9.1. Rubber Insulation For Copper And Drain Pipe Lines- 1” Thickness 4.9.2. Use Liquid Tight Flexible Hose Or Pvc Pipe Orange For Condenser Unit 4.9.3. Use Stainless Steel Enclosure For Secondary Breakers 4.9.4. Provide Proper Water Proof Tagging For Indoor And Outdoor Units 4.9.5 Drain Pipe Line- Indoor Unit-1 Inch Diameter (minimum); Main Line 2”diameter (minimum) 4.9.6 Pressure/leak Test Of All Refrigerant Lines- 8 Hrs At 300 Psi Witness By Emd Representative 4.9.7 Flow Test Of Drain Lines Witness By Emd Representative 4.9.8 Perform All Requirements Stated In Start-up Sheet Of Air Conditioner Manufacturer And Shall Submit Copy To Emd 4.9.9. Conduct Waterproofing Of All Pipe Sleeve 4.10. The Contractor Shall Dismantle Existing Ac Units And Any Obstruction Prior To Air Conditioner Installation. Contractor Shall Conduct Water Proofing On Concrete Slab (copper Lines Stub Out). 4.11. The Contractor Shall Have A Certification From The Manufacturer That It Is Authorized To Perform The Distribution, Installation, And Maintenance Of The Inverter Type Air Conditioner. 4.12. The Contractor Shall Have A Certificate Of Distributorship Of The Inverter Type Air Conditioner. 4.13. The Contractor Shall Submit As-built Mechanical Plan Signed And Sealed By Professional Mechanical Engineer (pme) During The Turn-over Of The Project. 4.14. The Contractor Shall Provide Five (5) Years Warranty For The Compressor, Two (2) Years For The Inverter Parts, And One (1) Year For Workmanship. 4.15. The Contractor Shall Conduct Quarterly Preventive Maintenance For One (1) Year Which Include Cleaning Without Additional Cost To Phc 4.16. Testing And Commissioning With The Presence Of Phc-emd Engineers. Itb No. 003.25- 18 Sets Air Conditioning Units - 5c 1 Description Of Function 1.1 Air Conditioning System/unit- Is An Inverter Type Of Air Conditioner That Use To Cool Down The Temperature In An Inside Space By Removing The Existing Heat And Moisture From The Room. Essentially They Work By Taking Warm Air Into A System And Dispensing Cold Air. Inverter Air Conditioner Have Less Power Loss That Can Save Energy By Changing Compressor Motor Speed Without Turning The Motor On And Off. 2 Operational Requirements 2.1 . System Complete With All Accessories As Specified In The Technical Specifications Below. 3 Technical Specifications Item No. Area Room Capacity Type Voltage Hz Phase Controller Feature 1 508 2.5 Inverter-wall Mounted 220-230 60 1 Wireless Voltage Protection, High Density Dust Filter With Antimicrobial Properties With Turbo Mode 2 509 2.5 Inverter-wall Mounted " " " " " 3 510 2.5 Inverter-wall Mounted " " " " " 4 511 2.5 Inverter-wall Mounted " " " " " 5 512 2.5 Inverter-wall Mounted " " " " " 6 514 2.5 Inverter-wall Mounted " " " " " 7 515 2.5 Inverter-wall Mounted " " " " " 8 516 2.5 Inverter-wall Mounted " " " " " 9 517 2 Inverter-wall Mounted " " " " " 10 517 1.5 Inverter-wall Mounted " " " " " 11 518 2 Inverter-wall Mounted " " " " " 12 518 1.5 Inverter-wall Mounted " " " " " 13 519 2.5 Inverter-wall Mounted " " " " " 14 520 2.5 Inverter-wall Mounted " " " " " 15 521 2.5 Inverter-wall Mounted " " " " " 16 522 2.5 Inverter-wall Mounted " " " " " 17 Hallway 4 Inverter-ceiling Cassette " " " " " 18 Hallway 4 Inverter-ceiling Cassette " " " " " 4 Scope Of Works 4.1. The Contractor Shall Coordinate To The Phc-emd Engineers To Conduct Actual Ocular Inspection For The Ideal Location Of All Air Conditioner Units. 4.2. The Contractor Shall Submit Detailed And Accurate Shop Drawings Prepared In Accordance With Mechanical And Electrical Code Of The Philippines And For Approval Of Phc-emd Prior To Installation. 4.3. The Contractor Shall Submit Pert/cpm To Engineering And Maintenance Division (emd) For Monitoring And Daily Works. 4.4. The Contractor Shall Apply And Secure Necessary Work Permit And Hot Work Permit Prior To Commencement Of Work. 4.5. The Contractor Shall Provide Heavy Duty Inverter Type Air Conditioner 4.6. The Contractor Shall Submit Heavy Duty Materials For Inspection And Approval By Phc-emd Prior To Installation. 4.7. The Contractor Shall Comply To The Installation Standards And Correct Specification Of Materials Prescribed By The Manufacturer In Accordance With Electrical And Mechanical Code Of The Philippines. 4.8. The Contractor Shall Perform And Provide Necessary Materials For Lay-out Of Power Supply From Electrical Room To Secondary Breaker (stainless Steel) Of Condensing Units. 4.9. The Contractor Shall Observe And Comply The Following: 4.9.1. Rubber Insulation For Copper And Drain Pipe Lines- 1” Thickness 4.9.2. Use Liquid Tight Flexible Hose Or Pvc Pipe Orange For Condenser Unit 4.9.3. Use Stainless Steel Enclosure For Secondary Breakers 4.9.4. Provide Proper Water Proof Tagging For Indoor And Outdoor Units 4.9.5 Drain Pipe Line- Indoor Unit-1 Inch Diameter (minimum); Main Line 2”diameter (minimum) 4.9.6 Pressure/leak Test Of All Refrigerant Lines- 8 Hrs At 300 Psi Witness By Emd Representative 4.9.7 Flow Test Of Drain Lines Witness By Emd Representative 4.9.8 Perform All Requirements Stated In Start-up Sheet Of Air Conditioner Manufacturer And Shall Submit Copy To Emd 4.9.9. Conduct Waterproofing Of All Pipe Sleeve 4.10. The Contractor Shall Dismantle Existing Ac Units And Any Obstruction Prior To Air Conditioner Installation. Contractor Shall Conduct Water Proofing On Concrete Slab (copper Lines Stub Out). 4.11. The Contractor Shall Have A Certification From The Manufacturer That It Is Authorized To Perform The Distribution, Installation, And Maintenance Of The Inverter Type Air Conditioner. 4.12. The Contractor Shall Have A Certificate Of Distributorship Of The Inverter Type Air Conditioner. 4.13. The Contractor Shall Submit As-built Mechanical Plan Signed And Sealed By Professional Mechanical Engineer (pme) During The Turn-over Of The Project. 4.14. The Contractor Shall Provide Five (5) Years Warranty For The Compressor, Two (2) Years For The Inverter Parts, And One (1) Year For Workmanship. 4.15. The Contractor Shall Conduct Quarterly Preventive Maintenance For One (1) Year Which Include Cleaning Without Additional Cost To Phc 4.16. Testing And Commissioning With The Presence Of Phc-emd Engineers.