Painting Tenders

Details: Multi-purpose building "kosmonaut" - renovation of emergency lighting In 16303 Schwedt/oder, Berliner Strasse 52 A Renovation of emergency lighting The following task is functional, the bidder is responsible for planning and installing the repair of emergency lighting in accordance with the objective. If it is relevant for the calculation, the local situation can be inspected. Arrangements for this can be made via the city administration, Mr. Michajlowski, Tel. 03332-446-350. In the single-storey multi-purpose building with theater hall (approx. 150 seats) and gymnasium (1 field), emergency lighting is available in the necessary corridors, the technical rooms, the hall, the gymnasium and the rooms of the cultural association. There is one light in the outdoor area behind each of the exits to the outside. The escape sign lights are operated in a permanent mode and the emergency lights in a standby mode. All lights are supplied by a central battery system. Task: - Retrofitting emergency lighting in the hallway in front of the former kitchen. - A test book must be supplied and filled out in accordance with Vde V 0108-100:2010-08. - The emergency lighting control unit must be replaced or made new. The following problems exist: - 8 of 12 circuits are faulty. The system's error memory is full. - An interruption in the battery circuit is not detected by the system - The control unit must document where the control unit's supply fuse is. Existing control unit: Beghelli Präzisa Type: Ngbve-z; 24/06/085/01/03/3/okc Batteries: 18 pieces Beghelli LFP1233 12V 33AH, total 8kVA Offer must include: - Correction of all problems mentioned above - Planning and construction support services - Delivery and assembly of all components - New safety lighting should be the same size as the existing one in order to avoid painting work - Dismantling and disposal of existing emergency lights, pictograms and control panel - Replacement of all escape sign lights and emergency lights to LED - Laying of the supply lines for the safety lighting - Coordination with the expert (if required) - Acceptance by an expert without defects is required - Accompaniment during acceptance by an expert - Notification of the elimination of defects to the expert - Installer's certificate - Delivery and provision of scaffolding/rolling scaffolding - An overview diagram + performance balance of the connected lights - An electrical circuit overview - A battery data sheet - An operating manual - An installer's declaration - Documentation: Data sheets, operating duration test, commissioning report General: When installing the systems, the following guidelines, requirements, regulations, recommendations, orders as well as the latest technical findings and recognized rules of technology in their latest version must be taken into account: - VDE regulations - DIN standards - Cable system guidelines (LEIAR) - Requirements of the lower building supervisory authority - Requirements and regulations of the Technical Inspection Association and the Trade Supervisory Office - Federal accident prevention regulations - Relevant recommendations and orders of the responsible professional associations - Requirements of the state building regulations - Requirements of the fire brigade - VDS guidelines - VDEW guidelines - Noise protection regulations - Telecommunications - General service instructions for the postal and telecommunications system - Technical connection conditions of the corresponding VNB - EMC law - Use of CE-marked components The offer price includes the additional services for: - Delivery, laying and testing of all necessary cables and lines including their connections on both sides, - Delivery, Assembly, connection and testing, unless already included, of the objects and devices named, - small parts and auxiliary materials, - functional test of the entire system. The bidder assures that he has familiarized himself with the local conditions before submitting the offer. By submitting the offer, the contractor declares that no price discussions took place in connection with the calculation and that brand new devices and objects will generally be used during execution. By submitting the offer, the bidder declares his willingness to submit a written declaration on completion of the work stating that the work is in order in all respects and has been carried out in accordance with the latest DIN/VDE regulations and those of the responsible VNB. The system is to be handed over to the client on completion in perfect condition and in working order. After acceptance by the client or his representative and the rectification of any complaints that may arise and the handover of the complete inspection documents, the system is deemed to have been definitively accepted, which simultaneously means that it has been taken over by the client. The warranty begins at this point. The warranty is regulated according to VOB and is five years.

Details: Description Procurement Of Supply, Delivery, Installation, And Commissioning Of Processing Equipment Under Bangsamoro Assistance For Grassroots Innovation (bagi) - Tdif 2023 Ben. #1 Supply, Delivery And Installation Of Processing Equipment Of Charcoal Briquetting Process Of Sabaken Maguyaga Fishermen Cooperative Place Of Delivery: Brgy. Sabaken Northern Kabuntalan, Maguindanao Del Norte 1 .) Charcoal Crusher Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3.5kw (high-torque Electric Motor) Crushing Capacity: 300 – 500 Kg/h (depending On Charcoal Hardness And Moisture Content) Rotor Speed: 1,500 – 2,000 Rpm Feed Inlet Size: 300mm X 200mm Crushing Mechanism: Charcoal (lump Charcoal, Briquettes), Coal, And Biomass (optional) Hopper Capacity: 50 – 100 Kg Per Batch Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1100mm (h) Construction Material: Frame: Heavy-duty Steel Frame Blades/hammers: Hardened Steel For Durability Screens: Replaceable Stainless Steel Or Carbon Steel Mesh Discharge System: Gravity-based Or Optional Conveyor For Continuous Discharge Cooling System: Air-cooled Motor With Thermal Protection Safety Features: Emergency Stop Button Protective Covers Over Moving Parts Safety Lock On The Hopper Lid Lubrication: Manual Grease Lubrication For Bearings And Other Moving Parts Dust Control: Optional Dust Collection System Or Enclosed Design To Minimize Dust Dispersion Control System: On/off Switch With Overload Protection Adjustable Speed Control (optional For Certain Models) Operating Temperature: 5°c – 40°c Mobility: Equipped With Durable Wheels Or Skid Base For Easy Movement Accessories Included: Spare Blades/hammers Set Of Replacement Screens With Different Mesh Sizes Basic Toolkit For Maintenance Maintenance Requirements: Regular Lubrication And Periodic Blade Sharpening Or Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 2.) Charcoal Briquette Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3kw (high-torque Electric Motor For Heavy-duty Operation) Briquetting Capacity: 150 – 300 Kg/h (depending On Feed Material And Moisture Content) Briquette Size: Diameter: 50mm – 70mm (customizable) Length: Adjustable (40mm – 100mm) Biomass Materials (optional) Feed Inlet Size: 300mm X 200mm Hopper Capacity: 50 – 100 Kg Binding Material: Optional Binder Feed System (for Starch Or Clay Binders) Moisture Content Requirement: 8% – 12% For Optimal Briquette Formation Heating System: Optional Pre-heating For Better Briquette Cohesion Output Shape: Cylindrical, Hexagonal, Or Square (based On Mold Type) Construction Material: Frame: Heavy-duty Steel Construction Compression Chamber: Hardened Steel For Durability Operating Pressure: 30 – 60 Mpa (adjustable For Different Materials) Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Manual Or Automatic Conveyor Discharge (optional) Lubrication: Manual Grease Lubrication For Bearings And Compression System Control System: On/off Switch With Overload Protection Emergency Stop Button Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1200mm (h) Safety Features: Protective Covers Over Moving Parts Emergency Stop Button Overload Protection Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Movement Dust Control: Optional Dust Collection System Or Enclosed Feed System Accessories Included: Set Of Molds For Different Briquette Shapes And Sizes Maintenance Toolkit Operating Manual Maintenance Requirements: Regular Lubrication And Periodic Mold Inspection And Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 3.) Charcoal Mixer = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 10 Hp Mixing Capacity: 200 – 500 Kg/h (depending On Material Type And Moisture Content) Mixing Type: Horizontal Or Vertical Ribbon Mixer Mixing Chamber Volume: 200 Liters Material Compatibility: Charcoal Powder Charcoal Dust Biomass Materials (e.g., Wood Shavings, Sawdust) Binder Additives (if Applicable) Feed Inlet Size: 150mm X 150mm (with Safety Cover) Discharge Outlet Size: 100mm X 100mm (manual Or Pneumatic Discharge Options) Mixing Speed: 30 – 50 Rpm (fixed Speed) Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Mixing Blades: Hardened Steel For Long-lasting Durability Fuel Tank Capacity: 3.5 – 5 Liters (diesel Fuel) Fuel Consumption: 0.8 – 1.5 Liters Per Hour (depending On Load And Engine Type) Cooling System: Air-cooled Diesel Engine Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Engine Overload Protection Machine Dimensions: Approx. 1400mm (l) X 900mm (w) X 1200mm (h) Mobility: Equipped With Heavy-duty Wheels Or Skid Base For Easy Movement Included Accessories: Basic Maintenance Toolkit Operating Manual Spare Mixing Blades (optional) Control System: On/off Switch For Engine Control Throttle Control For Engine Speed Adjustment Maintenance Requirements: Regular Lubrication And Cleaning Of Mixing Components Diesel Engine Maintenance (oil Change, Filter Cleaning) Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 4.) Fabricated Solar Dryer House = 1 Pc Specifications: Drying Area: 20 M² Can Be Customized Based On Available Space And Drying Capacity. Structure Frame: Material: Galvanized Steel Or Aluminum Alloy Frame Frame Dimensions: Approx. 3m (w) X 6m (l) X 2.5m (h) For A 20 M² House Corrosion-resistant Material For Outdoor Durability. Covering Material: Uv-stabilized Polyethylene Or Polycarbonate Plastic Sheeting Thickness: 200 Microns – 300 Microns Lifespan: 3 – 5 Years (depending On Maintenance) Light Transmittance: 80% – 90% (for Optimal Drying Efficiency) Ventilation System: Adjustable Air Vents Or Windows On Sidewalls And Roof For Airflow Control. Optional Exhaust Fans (solar-powered) For Better Air Circulation. Flooring: Raised Mesh Or Perforated Flooring For Air Circulation Underneath Drying Materials Material: Food-grade Stainless Steel Or Heavy-duty Plastic. Optional: Concrete Flooring With Drainage System. Shelving: Multi-layer Drying Racks (3 To 5 Layers, Adjustable) Frame: Stainless Steel Or Galvanized Metal Mesh: Uv-resistant Plastic Or Food-grade Stainless Steel Shelving Space Per Layer: 1.5m X 6m (adjustable). Entry/exit: Sliding Or Hinged Doors With Uv Plastic Covering Optional Lockable Doors For Security Temperature Control: Natural Solar Heating (temperature Up To 50°c – 70°c Inside The Dryer) Optional Thermostat For Monitoring Temperature Levels. Moisture Control: Adjustable Air Vents To Control Humidity Levels. Optional Hygrometer For Humidity Measurement. Rain Protection: Sloped Roof Design For Rainwater Runoff. Sealed Edges To Prevent Water Seepage. Wind Resistance: Windproof Design, Capable Of Withstanding Wind Speeds Up To 80 Km/h. Capacity: Suitable For Drying Fruits, Vegetables, Seaweed, Fish, Spices, And Herbs. Approx. 100 – 500 Kg Of Materials Per Batch (depending On House Size And Product Type). Installation: Modular Design For Easy Assembly And Disassembly. Includes Assembly Manual And Required Hardware. Maintenance: Uv Plastic Requires Periodic Cleaning To Remove Dust And Debris. Frame And Ventilation System Should Be Inspected Regularly. Accessories Included: Solar-powered Exhaust Fans (optional). Digital Thermometer And Hygrometer (optional). Extra Uv Plastic Sheeting For Future Replacements. Operating Temperature: 5°c – 45°c (ambient Temperature Range For Optimal Operation). Weight: Approx. 100 – 300 Kg (depending On Size And Materials Used). Lifespan: Uv Plastic Cover Expected To Last 3 – 5 Years; Frame Expected To Last 10 – 15 Years With Proper Maintenance. Warranty: 1-year Warranty On Structure And Uv Plastic Covering. ----------------nothing Follows------------------ Ben. #2 Supply, Delivery And Installation Of Processing Equipment Of Livestock Feeds Production Of Igabay Coconut Farmers Organization Place Of Delivery: Brgy. Igabay, Balabagan, Lanao Del Sur 1.) Heavy-duty Hammer Mill Machine = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (diesel-powered, Air-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Material And Load) Production Capacity: 400 – 500 Kg/h (depending On Material Type And Moisture Content) Rotor Speed: 1,800 – 2,500 Rpm Hammer Type: Grain (corn, Wheat, Sorghum, Etc.) Biomass (wood Chips, Agricultural Waste) Stalks And Straw Dry Grasses And Forage Various Other Materials For Processing Screen Size Options: Multiple Screen Sizes (2mm – 10mm) For Different Output Particle Sizes Feed Inlet Size: Approx. 300mm X 200mm (customizable Based On Material Size) Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1300mm (h) Material Of Construction: Frame: Stainless Steel Hammers: Hardened Steel Screens: Replaceable Mesh Screens Made Of Stainless Discharge System: Gravity-based Or Optional Conveyor Belt Discharge Safety Features: Emergency Stop Button Heavy-duty Guards For Moving Parts Vibration-dampening Mounts For Stable Operation Lubrication System: Manual Grease Points For Bearings And Other Moving Parts Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Transport Included Accessories: Set Of Replacement Hammers Set Of Screens (with Different Mesh Sizes) Basic Toolkit For Maintenance Warranty: 1-year Warranty On Parts And Labor 2.) Feeds Pellet Mill Machine = 1 Set Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (air-cooled Or Water-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Load And Material) Production Capacity: 400 – 500 Kg/h (varies With Material Type And Pellet Size) Pellet Size: Adjustable From 2mm To 8mm (customizable Die Sizes) Die Type: Flat Die Or Ring Die (interchangeable Dies Available) Agricultural Waste Fish Meal And Other Feed Ingredients Hopper Capacity: 50 – 80 Kg Pelletizing Speed: 150 – 200 Rpm Feed Form: Dry Pellets Material Of Construction: Frame: Heavy-duty Steel Construction Rollers And Dies: Hardened Steel For Durability And Wear Resistance Discharge System: Gravity-based Or Optional Conveyor Pellet Length: Adjustable (via Cutting Knife At The Die) Machine Dimensions: Approx. 1600mm (l) X 900mm (w) X 1500mm (h) Cooling System: Air Or Water Cooling (to Prevent Overheating During Extended Use) Lubrication System: Manual Grease Lubrication For Bearings And Rollers Operating Temperature: 5°c – 40°c Safety Features: Emergency Stop Button Safety Guards On All Moving Parts Overload Protection Mobility: Mounted On Wheels Or Skid Base For Ease Of Transportation Included Accessories: Set Of Spare Dies (with Different Hole Sizes) Tool Kit For Basic Maintenance Operating Manual Fuel Tank Capacity: 10 – 15 Liters Pelletizing Efficiency: 90% – 95% Conversion Of Feedstock Into Pellets Warranty: 1-year Warranty On Parts And Labor 3.) Mixer Borrow Machine =1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 4.) Siever Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 0.75kw – 1.5kw (electric Motor With Variable Speed Control) Sieving Capacity: 300 – 500 Kg/h (depending On Material Type And Screen Size) Screen Type: Multiple-layer Vibrating Screens Stainless Steel Mesh (food-grade Or Standard Options Available) Fine Powders (flour, Starch, Etc.) Granular Materials (sand, Grains, Seeds) Dry Food Products Fertilizers Aggregates (cement, Construction Materials) Feeding System: Manual Or Automatic Feed Hopper With Adjustable Feed Rate Machine Dimensions: Approx. 1700mm (l) X 800mm (w) X 9000mm (h) Frame Construction: Heavy-duty Stainless Steel (rust-resistant, Suitable For Industrial Use) Control System: On/off Switch With Vibration Adjustment Thermal Overload Protection Vibration Mechanism: Eccentric Motor-driven Vibration System Operating Temperature: 5°c – 45°c Mobility: Fitted With Wheels Or Skid Base For Easy Movement Safety Features: Safety Guards On Moving Parts Emergency Stop Button Overload Protection Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Set Of Different Screen Meshes (with Various Sizes) Tool Kit For Maintenance And Screen Changes Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #3 Supply, Delivery And Installation Of Processing Equipment Of Livestock Feeds Production Of Kauran Allience Farmers Marketing Cooperative Place Of Delivery Brgy. Kauran, Ampatuan, Maguindanao Del Sur 1.) Heavy-duty Hammer Mill Machine = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (diesel-powered, Air-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Material And Load) Production Capacity: 400 – 500 Kg/h (depending On Material Type And Moisture Content) Rotor Speed: 1,800 – 2,500 Rpm Hammer Type: Grain (corn, Wheat, Sorghum, Etc.) Biomass (wood Chips, Agricultural Waste) Stalks And Straw Dry Grasses And Forage Various Other Materials For Processing Screen Size Options: Multiple Screen Sizes (2mm – 10mm) For Different Output Particle Sizes Feed Inlet Size: Approx. 300mm X 200mm (customizable Based On Material Size) Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1300mm (h) Material Of Construction: Frame: Stainless Steel Hammers: Hardened Steel Screens: Replaceable Mesh Screens Made Of Stainless Discharge System: Gravity-based Or Optional Conveyor Belt Discharge Safety Features: Emergency Stop Button Heavy-duty Guards For Moving Parts Vibration-dampening Mounts For Stable Operation Lubrication System: Manual Grease Points For Bearings And Other Moving Parts Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Transport Included Accessories: Set Of Replacement Hammers Set Of Screens (with Different Mesh Sizes) Basic Toolkit For Maintenance Warranty: 1-year Warranty On Parts And Labor 2.) Feeds Pellet Mill Machine = 1 Set Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 3.) Mixer Borrow Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 4.) Siever Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 0.75kw – 1.5kw (electric Motor With Variable Speed Control) Sieving Capacity: 300 – 500 Kg/h (depending On Material Type And Screen Size) Screen Type: Multiple-layer Vibrating Screens Stainless Steel Mesh (food-grade Or Standard Options Available) Fine Powders (flour, Starch, Etc.) Granular Materials (sand, Grains, Seeds) Dry Food Products Fertilizers Aggregates (cement, Construction Materials) Feeding System: Manual Or Automatic Feed Hopper With Adjustable Feed Rate Machine Dimensions: Approx. 1700mm (l) X 800mm (w) X 9000mm (h) Frame Construction: Heavy-duty Stainless Steel (rust-resistant, Suitable For Industrial Use) Control System: On/off Switch With Vibration Adjustment Thermal Overload Protection Vibration Mechanism: Eccentric Motor-driven Vibration System Operating Temperature: 5°c – 45°c Mobility: Fitted With Wheels Or Skid Base For Easy Movement Safety Features: Safety Guards On Moving Parts Emergency Stop Button Overload Protection Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Set Of Different Screen Meshes (with Various Sizes) Tool Kit For Maintenance And Screen Changes Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #4 Supply, Delivery And Installation Processing Equipment Of Seaweeds Chips Of Abs-mhet Aquamarine Producer. Place Of Delivery Brgy. San Reymundo, Jolo, Sulu 1.) Electric Dough Sheeter Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5 Kw Rolling Width: 600 Mm Dough Thickness Adjustment: Adjustable From 0.5 Mm To 10 Mm Manual Or Automatic Thickness Adjustment System Frame: Heavy-duty Stainless Steel Or Painted Carbon Steel Rollers: Food-grade Stainless Steel For Easy Cleaning And Durability Dimensions: Approx. 1200 Mm (l) X 800 Mm (w) X 1100 Mm (h) Safety Features: Emergency Stop Button Safety Guards On Rollers Overload Protection Control System: On/off Switch With Overload Protection Variable Speed Control For Conveyor And Roller Speed Cleaning System: Easy Access For Cleaning Rollers And Conveyor Removable Parts For Thorough Cleaning Mobility: Equipped With Sturdy Wheels Or Skid Base For Easy Transport Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Maintenance Toolkit Operating Manual Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 2.) Seaweeds Grinder Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 3 Kw (high-torque Electric Motor For Heavy-duty Operation) Grinding Capacity: 100 – 200 Kg/h (depending On Seaweed Type And Moisture Content) Grinding Mechanism: Hammer Mill Or Knife Mill Grinding System Adjustable Grinding Fineness (1 Mm To 5 Mm Particle Size) Other Plant Materials (optional) Screen Type: Removable Stainless Steel Screen For Varying Particle Sizes Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Gravity-based Discharge Or Optional Conveyor For Continuous Operation Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Grinding Chamber: Corrosion-resistant Material Suitable For Marine Products Machine Dimensions: Approx. 1500 Mm (l) X 800 Mm (w) X 1200 Mm (h) Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Overload Protection Control System: On/off Switch With Overload Protection Variable Speed Control (optional) Lubrication: Manual Grease Lubrication For Bearings And Grinding Components Mobility: Equipped With Sturdy Wheels For Easy Movement Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Spare Screens Of Different Mesh Sizes Maintenance Toolkit Operating Manual Cleaning System: Easy Access For Cleaning And Maintenance Dust Control: Optional Dust Extraction System Or Enclosed Design To Minimize Dust Dispersion Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 3.) Seaweeds Solar Dryer Machine = 1 Pc Specifications: Power Supply: 12v Dc (powered By Solar Panel And Battery System) Solar Panel: Type: Monocrystalline Or Polycrystalline Power Output: 100w – 200w Voltage: 12v Battery: Drying Method: Natural Convection Drying With Solar Heat Optional Fan-assisted Airflow For Improved Efficiency Drying Chamber Dimensions: Approx. 1200mm (l) X 800mm (w) X 800mm (h) Adjustable Shelving For Effective Drying 7 Layer Tray Rack Compatible To Drying Chamber Material Compatibility: Fresh Or Dried Seaweeds (e.g., Agar, Carrageenan) Other Plant Materials (optional) Construction Material: Frame: Heavy-duty Aluminum Or Stainless Steel Chamber: Uv-resistant Polycarbonate Or Insulated Metal Temperature Control: Thermostat With Temperature Gauge (up To 60°c) Adjustable Airflow Control For Optimal Drying Conditions Ventilation System: Adjustable Vents For Moisture Control Optional Exhaust Fan (12v Dc) For Enhanced Airflow Weight: Approx. 50 – 80 Kg (depending On Materials Used) Mobility: Equipped With Wheels Or A Skid Base For Easy Movement Included Accessories: Solar Panel Mounting Brackets Battery Charger And Controller Shelving Units For Drying Operating Manual Cleaning System: Easy Access For Cleaning The Drying Chamber Dust Control: Enclosed Design To Minimize Dust Ingress Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #5 Supply, Delivery And Installation Of Processing Equipment Of Charcoal Briquetting Process Of Sabaken Maguyaga Fishermen Cooperative Place Of Delivery Brgy. Panosolen, Gen. Salipada K. Pendatun, Maguindanao Del Sur 1.) Charcoal Crusher Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3.5kw (high-torque Electric Motor) Crushing Capacity: 300 – 500 Kg/h (depending On Charcoal Hardness And Moisture Content) Rotor Speed: 1,500 – 2,000 Rpm Feed Inlet Size: 300mm X 200mm Crushing Mechanism: Charcoal (lump Charcoal, Briquettes), Coal, And Biomass (optional) Hopper Capacity: 50 – 100 Kg Per Batch Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1100mm (h) Construction Material: Frame: Heavy-duty Steel Frame Blades/hammers: Hardened Steel For Durability Screens: Replaceable Stainless Steel Or Carbon Steel Mesh Discharge System: Gravity-based Or Optional Conveyor For Continuous Discharge Cooling System: Air-cooled Motor With Thermal Protection Safety Features: Emergency Stop Button Protective Covers Over Moving Parts Safety Lock On The Hopper Lid Lubrication: Manual Grease Lubrication For Bearings And Other Moving Parts Dust Control: Optional Dust Collection System Or Enclosed Design To Minimize Dust Dispersion Control System: On/off Switch With Overload Protection Adjustable Speed Control (optional For Certain Models) Operating Temperature: 5°c – 40°c Mobility: Equipped With Durable Wheels Or Skid Base For Easy Movement Accessories Included: Spare Blades/hammers Set Of Replacement Screens With Different Mesh Sizes Basic Toolkit For Maintenance Maintenance Requirements: Regular Lubrication And Periodic Blade Sharpening Or Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 2.) Charcoal Briquette Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3kw (high-torque Electric Motor For Heavy-duty Operation) Briquetting Capacity: 150 – 300 Kg/h (depending On Feed Material And Moisture Content) Briquette Size: Diameter: 50mm – 70mm (customizable) Length: Adjustable (40mm – 100mm) Biomass Materials (optional) Feed Inlet Size: 300mm X 200mm Hopper Capacity: 50 – 100 Kg Binding Material: Optional Binder Feed System (for Starch Or Clay Binders) Moisture Content Requirement: 8% – 12% For Optimal Briquette Formation Heating System: Optional Pre-heating For Better Briquette Cohesion Output Shape: Cylindrical, Hexagonal, Or Square (based On Mold Type) Construction Material: Frame: Heavy-duty Steel Construction Compression Chamber: Hardened Steel For Durability Operating Pressure: 30 – 60 Mpa (adjustable For Different Materials) Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Manual Or Automatic Conveyor Discharge (optional) Lubrication: Manual Grease Lubrication For Bearings And Compression System Control System: On/off Switch With Overload Protection Emergency Stop Button Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1200mm (h) Safety Features: Protective Covers Over Moving Parts Emergency Stop Button Overload Protection Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Movement Dust Control: Optional Dust Collection System Or Enclosed Feed System Accessories Included: Set Of Molds For Different Briquette Shapes And Sizes Maintenance Toolkit Operating Manual Maintenance Requirements: Regular Lubrication And Periodic Mold Inspection And Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 3.) Charcoal Mixer = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 10 Hp Mixing Capacity: 200 – 500 Kg/h (depending On Material Type And Moisture Content) Mixing Type: Horizontal Or Vertical Ribbon Mixer Mixing Chamber Volume: 200 Liters Material Compatibility: Charcoal Powder Charcoal Dust Biomass Materials (e.g., Wood Shavings, Sawdust) Binder Additives (if Applicable) Feed Inlet Size: 150mm X 150mm (with Safety Cover) Discharge Outlet Size: 100mm X 100mm (manual Or Pneumatic Discharge Options) Mixing Speed: 30 – 50 Rpm (fixed Speed) Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Mixing Blades: Hardened Steel For Long-lasting Durability Fuel Tank Capacity: 3.5 – 5 Liters (diesel Fuel) Fuel Consumption: 0.8 – 1.5 Liters Per Hour (depending On Load And Engine Type) Cooling System: Air-cooled Diesel Engine Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Engine Overload Protection Machine Dimensions: Approx. 1400mm (l) X 900mm (w) X 1200mm (h) Mobility: Equipped With Heavy-duty Wheels Or Skid Base For Easy Movement Included Accessories: Basic Maintenance Toolkit Operating Manual Spare Mixing Blades (optional) Control System: On/off Switch For Engine Control Throttle Control For Engine Speed Adjustment Maintenance Requirements: Regular Lubrication And Cleaning Of Mixing Components Diesel Engine Maintenance (oil Change, Filter Cleaning) Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 4.) Fabricated Solar Dryer House = 1 Pc Specifications: Drying Area: 20 M² Can Be Customized Based On Available Space And Drying Capacity. Structure Frame: Material: Galvanized Steel Or Aluminum Alloy Frame Frame Dimensions: Approx. 3m (w) X 6m (l) X 2.5m (h) For A 20 M² House Corrosion-resistant Material For Outdoor Durability. Covering Material: Uv-stabilized Polyethylene Or Polycarbonate Plastic Sheeting Thickness: 200 Microns – 300 Microns Lifespan: 3 – 5 Years (depending On Maintenance) Light Transmittance: 80% – 90% (for Optimal Drying Efficiency) Ventilation System: Adjustable Air Vents Or Windows On Sidewalls And Roof For Airflow Control. Optional Exhaust Fans (solar-powered) For Better Air Circulation. Flooring: Raised Mesh Or Perforated Flooring For Air Circulation Underneath Drying Materials Material: Food-grade Stainless Steel Or Heavy-duty Plastic. Optional: Concrete Flooring With Drainage System. Shelving: Multi-layer Drying Racks (3 To 5 Layers, Adjustable) Frame: Stainless Steel Or Galvanized Metal Mesh: Uv-resistant Plastic Or Food-grade Stainless Steel Shelving Space Per Layer: 1.5m X 6m (adjustable). Entry/exit: Sliding Or Hinged Doors With Uv Plastic Covering Optional Lockable Doors For Security Temperature Control: Natural Solar Heating (temperature Up To 50°c – 70°c Inside The Dryer) Optional Thermostat For Monitoring Temperature Levels. Moisture Control: Adjustable Air Vents To Control Humidity Levels. Optional Hygrometer For Humidity Measurement. Rain Protection: Sloped Roof Design For Rainwater Runoff. Sealed Edges To Prevent Water Seepage. Wind Resistance: Windproof Design, Capable Of Withstanding Wind Speeds Up To 80 Km/h. Capacity: Suitable For Drying Fruits, Vegetables, Seaweed, Fish, Spices, And Herbs. Approx. 100 – 500 Kg Of Materials Per Batch (depending On House Size And Product Type). Installation: Modular Design For Easy Assembly And Disassembly. Includes Assembly Manual And Required Hardware. Maintenance: Uv Plastic Requires Periodic Cleaning To Remove Dust And Debris. Frame And Ventilation System Should Be Inspected Regularly. Accessories Included: Solar-powered Exhaust Fans (optional). Digital Thermometer And Hygrometer (optional). Extra Uv Plastic Sheeting For Future Replacements. Operating Temperature: 5°c – 45°c (ambient Temperature Range For Optimal Operation). Weight: Approx. 100 – 300 Kg (depending On Size And Materials Used). Lifespan: Uv Plastic Cover Expected To Last 3 – 5 Years; Frame Expected To Last 10 – 15 Years With Proper Maintenance. Warranty: 1-year Warranty On Structure And Uv Plastic Covering. ----------------nothing Follows------------------ Ben. #6 Supply, Delivery And Installation Of Processing Equipment Of Fresh Water Fish Processing Of Bangsamoro Grassroot Anti-poverty Agriculture Cooperative Place Of Delivery Brgy. Lagunde Pikit, North Cotabato 1.) Production And Packaging Equipment = 1 Set Working Table = 1 Pc Table Dimensions: Length: 1500mm (1.5m) Width: 700mm (0.7m) Height: 850mm (standard Working Height) Material: Tabletop: Food-grade Stainless Steel (grade 304), Corrosion-resistant And Easy To Clean. Frame And Legs: Heavy-duty Stainless Steel Or Galvanized Steel For Durability And Stability. Undershelf: Optional Stainless Steel Shelf For Additional Storage. Surface Finish: Smooth, Non-porous, And Polished Surface To Prevent Bacteria Buildup And Ensure Easy Cleaning. Edge Corners Rounded For Safety And Cleanliness. Load Capacity: Capable Of Holding Up To 200 Kg Of Fish And Processing Tools. Stainless Steel Collander (double Ears) = 10 Pcs "material Type: High-quality Food-grade Stainless Steel (grade 304). Corrosion Resistance: Rust-proof And Corrosion-resistant, Suitable For Handling Fish And Other Seafood. Finish: Polished Or Brushed Stainless Steel For Easy Cleaning And Hygiene. Sizes: 2 Pcs Small: Diameter: 250mm (25cm), Depth: 120mm (12cm), Capacity: 4 Liters, Weight: 0.7 Kg 2 Pcs Medium: Diameter: 300mm (30cm), Depth: 150mm (15cm), Capacity: 7 Liters, Weight: 1 Kg 3 Pcs Large: Diameter: 350mm (35cm), Depth: 170mm (17cm), Capacity: 10 Liters, Weight: 1.3 Kg 3 Pcs Extra-large: Diameter: 400mm (40cm), Depth: 200mm (20cm), Capacity: 15 Liters, Weight: 1.8 Kg " Household Scales = 2 Pcs "capacity And Accuracy Maximum Capacity: 10 Kg (22 Lbs) Graduation/accuracy: 1 Gram (0.001 Kg) Weighing Units: Kg, G, Lb, Oz Type: Large Lcd Digital Display With Backlight For Clear Visibility. Screen Size: 50mm X 30mm (approximately) Display Features: Shows Weight, Low Battery, Overload Indicator, And Tare Function. Button Functions: Power, Tare, Unit Conversion. Power Source: 2 X Aaa Batteries Or Rechargeable Battery (depending On Model) And Ac Adapter Option For Continuous Use In Commercial Settings. Dimensions And Weight Overall Dimensions: 250mm (l) X 230mm (w) X 60mm (h) Weight: 1.2 Kg Compliance Food Safety: Compliant With Haccp Standards For Safe Use In Food Processing Environments. Calibration: Factory Calibrated And Can Be Re-calibrated As Needed " Measuring Cups And Spoon, Set = 2 Pcs "measuring Cups Specifications: Material: Food-grade Stainless Steel Or Bpa-free Plastic Sizes: 1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup Measuring Spoons Specifications: Material: Food-grade Stainless Steel Or Bpa-free Plastic Sizes: 1 Tablespoon, 1/2 Tablespoon, 1 Teaspoon, 1/2 Teaspoon, 1/4 Teaspoon " Stainless Steel Knife Set = 2 Pcs Stainless Basin = 5 Pcs * Deep Stainless Steel Basin And Stainless Steel Basins Digital Weighing Scale = 2 Pcs "capacity: 10 Kg (22 Lbs) Accuracy: 1 Gram (0.001 Kg) Units: Kg, G, Lb, Oz Display: Large Lcd Digital Display With Backlight. Shows Weight, Low Battery, And Overload Indicators. Platform: Material: Food-grade Stainless Steel Size: 250mm X 250mm Power: Powered By 2 X Aaa Batteries Or Rechargeable Battery (optional Ac Adapter) Auto-off After 2 Minutes Of Inactivity " Utensils, Set (spatula, Paddle, Bowls,) = 3 Pcs Impluse Sealer = 2 Pcs "sealing Length: 300mm, Material: Durable Metal Housing, Corrosion-resistant And Heat-resistant Sealing Strip For Continuous Use Sealing Width: 2mm – 5mm (adjustable, Depending On Model) Heating Time: Adjustable (0.2 - 1.5 Seconds) For Various Bag Thicknesses Power Supply: Standard 220v, Single-phase Seal Types: Works With Pp, Pe, And Laminated Packaging Films Ideal For Sealing Plastic Bags Up To 0.2mm In Thickness Weight: Approximately 2–4 Kg, Depending On Model " Stainless Steel Knife = 4 Set "material: Blades: High-carbon Stainless Steel For Sharpness And Corrosion Resistance Handles: Ergonomic, Non-slip, And Easy-to-grip Polypropylene Or Stainless Steel Handles Knife Types (common In Fish Processing): Fillet Knife: Flexible Blade, 6-8 Inches, For Precise Filleting Boning Knife: 5-6 Inches, Stiff Blade For Deboning Chef’s Knife: 8 Inches, Multipurpose For Cutting, Slicing Utility Knife: 4-6 Inches, For Smaller Tasks And Trimming Cleaver: Heavy-duty, Ideal For Cutting Through Bones (optional In Some Sets)" Tray Rack,24 Trays Cap = 1 Pc "material: Stainless Steel Or Aluminum For Durability And Corrosion Resistance, Ideal For Food Processing Environments. Capacity: Holds Up To 24 Trays (compatible With Standard Trays Approximately 18"" X 26""). Dimensions: Overall Size: Approx. 180 Cm (h) X 60 Cm (w) X 50 Cm (d)" Soaking, S/s, 20l Cap, With Strainer = 10 Set "material: Stainless Steel (s/s) For Durability, Rust Resistance, And Easy Cleaning. Food-grade Material Safe For Direct Food Contact. Capacity: 20 Liters (suitable For Soaking Larger Batches Of Fish Or Other Food Items). Bowl Diameter: Approx. 35 Cm Height: Approx. 25 Cm" Stainless Mixing Bowl (different Sizes) = 10 Set "material: High-quality Stainless Steel For Durability, Rust Resistance, And Easy Maintenance. Food-grade, Safe For All Food Preparation Tasks. Sizes: Small: 1.5 Liters Medium: 3 Liters Large: 5 Liters Extra Large: 7 Liters" Stainless Steel Double Handle Frying Pan = 10 Set "material: Stainless Steel For Durability, Even Heat Distribution, And Rust Resistance. Food-grade, Suitable For High-heat Cooking. Size: Diameter: Available In Various Sizes, Commonly 30 Cm To 40 Cm. Depth: Approximately 5 Cm To 7 Cm, Ideal For Frying " Stainless Steel Colander = 10 Pcs "material: High-quality Stainless Steel, Rust-resistant And Durable. Food-grade, Suitable For Rinsing And Draining Food Items. Size: Available In Various Sizes, Typically 2 To 5 Liters Capacity. Diameter: 20 Cm To 30 Cm (varies By Model)." Measuring Cups And Spoons For Liquid = 10 Set "material: Food-grade Plastic Bpa-free If Plastic, For Safe Use With Liquids. Sizes: Measuring Cups: Commonly Includes 1 Cup (240 Ml), 1/2 Cup (120 Ml), 1/3 Cup (80 Ml), And 1/4 Cup (60 Ml). Measuring Spoons: Includes 1 Tablespoon (15 Ml), 1 Teaspoon (5 Ml), 1/2 Teaspoon (2.5 Ml), And 1/4 Teaspoon (1.25 Ml)." Cutting/chopping Board = 10 Pcs "material: Food-grade Plastic Non-porous And Stain-resistant To Prevent Bacterial Growth. Sizes: Small: 20 Cm X 15 Cm, Ideal For Small Tasks. Medium: 30 Cm X 20 Cm, Suitable For General Chopping. Large: 40 Cm X 30 Cm, Ideal For Cutting Larger Items." Kitchen Shears = 10 Set "material: Stainless Steel Blades For Durability, Rust Resistance, And Sharpness. Comfortable Handle Made Of Plastic Or Rubber, Often Ergonomic For Better Grip. Blade Length: Typically 8-10 Cm Cutting Length; Overall Length Around 20 Cm." Stainless Steel Knife = 2 Set "material: Stainless Steel Blades For Sharpness, Durability, And Corrosion Resistance. Handles Made From Plastic, Wood, Or Rubber For A Comfortable And Secure Grip. Set Includes (common Options): Chef's Knife (8 Inches): For Slicing, Dicing, And Chopping. Bread Knife (8 Inches): Serrated For Slicing Bread. Utility Knife (5 Inches): For Cutting Smaller Foods And Herbs. Paring Knife (3.5 Inches): For Peeling And Intricate Tasks." Casserole With Glass Lid = 3 Pcs "material: Stainless Steel Or Aluminum For Durability And Even Heat Distribution. Tempered Glass Lid With Steam Vent To Monitor Cooking Without Lifting The Lid. Capacity: Available In Various Sizes, Commonly 2 Liters To 6 Liters." Mixing Bowl Different Sizes (10l, 20l, 30l, 50l) = 10 Set "material: Food-grade Plastic (bpa-free) For Safety And Durability. Lightweight And Resistant To Staining And Odors. Sizes: 10 Liters: Suitable For Small To Medium Mixing Tasks. 20 Liters: Ideal For Larger Mixing Jobs Or Food Prep. 30 Liters: Great For Mixing Large Batches Of Ingredients. 50 Liters: Perfect For Heavy-duty Mixing In Commercial Kitchens." Plastic Food Grade Storage Boxes = 10 Pcs "material: Food-grade Polypropylene (pp) Or Polyethylene (pe), Safe For Food Storage. Sizes: 20 Kg Box (5pcs): Dimensions: Approximately 600mm (l) X 400mm (w) X 300mm (h) Capacity: Suitable For Storing Up To 20 Kg Of Food Items. 30 Kg Box(5 Pcs): Dimensions: Approximately 700mm (l) X 500mm (w) X 350mm (h)" 2.) Cooking Facility = 1 Set Gas Oven = 1 Pc "type: Gas Oven With Thermostat Capacity: Number Of Trays: 12 Trays Tray Size: Standard Size (approximately 40cm X 60cm Or Customizable Based On Design) Temperature Control: Thermostat: Adjustable Thermostat For Precise Temperature Control. Temperature Range: Typically Between 100°c To 300°c. Burners: Number Of Burners: 2 To 4 Gas Burners (depending On Model). Ignition Type: Manual Or Automatic Ignition System. Construction: Material: Heavy-duty Stainless Steel For Durability And Easy Cleaning. Insulation: Insulated Walls To Maintain Temperature And Reduce Heat Loss. Dimensions: Overall Size: Approximately 100cm (w) X 80cm (d) X 70cm (h) Fuel Type: Lpg " Complete Set Of Stove And Gas Tank = 2 Pcs Double Boiler Pot = 2 Pcs "capacity: 1.5 Liters To 4 Liters. " Stainless Steel Streamer = 1 Pc "material: High-quality Stainless Steel For Durability And Resistance To Rust And Corrosion. Size: 3 Liters To 10 Liters Capacity." Stainless Mixing Bowl = 5 Set "material: Made Of High-quality Stainless Steel For Durability, Corrosion Resistance, And Easy Cleaning. Sizes: Small: 1.5 Liters (1.6 Quarts) Medium: 3 Liters (3.2 Quarts) Large: 5 Liters (5.3 Quarts) Extra Large: 7 Liters (7.4 Quarts)" 3.) Upright Freezer = 1 Set Specifications: Power Supply: Single-phase (220v, 50hz) Capacity: 250 – 300 Liters (8.8 – 10.6 Cubic Feet) Temperature Range: -18°c To -25°c (adjustable Thermostat) Cooling System: Direct Cooling Or Fan-assisted Cooling (optional) Compressor Type: High-efficiency Inverter Compressor For Energy Savings Number Of Shelves: 4 – 6 Adjustable Wire Shelves Or Glass Shelves Door Type: Double Door, Swing Type Magnetic Door Seal For Air-tight Closure Defrosting: Manual Or Automatic Defrost (optional) Interior Lighting: Led Lighting For Energy Efficiency And Visibility Temperature Control: Digital Temperature Display With External Control Dimensions: Approx. 1210mm (w) X 730mm (d) X 1900mm (h) Weight: 45 – 60 Kg Safety Features: Overload And Overheat Protection Lockable Door For Security Mobility: Equipped With Caster Wheels For Easy Relocation Warranty: 2-year Warranty On Parts And Labor, 5-year Warranty On Compressor 4.) Food Dehydrator = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Power Consumption: 2.5kw Drying Capacity: 50 – 200 Kg Per Batch (depending On Machine Size And Type Of Fish) Drying Method: Hot Air Circulation System (electric Heating Elements With Fans) Temperature Range: 30°c – 90°c (adjustable) Drying Time: 4 – 12 Hours (depending On The Type Of Fish, Thickness, And Moisture Content) Tray Material: Stainless Steel Food-grade Trays (removable And Stackable) Number Of Trays: 10 Trays (upper And Lower Rack Gap: 34mm) Air Circulation System: Forced Air With Multiple Fans For Uniform Drying Construction Material: Exterior: Stainless Steel Or Powder-coated Mild Steel Interior: Stainless Steel (food-grade, Corrosion-resistant) Insulation: High-density Insulation Material To Minimize Heat Loss Humidity Control: Adjustable Humidity Control To Ensure Precise Drying Control System: Digital Temperature And Timer Control Overheat Protection Automatic Shut-off With Alarm Moisture Removal: 80% – 95% Moisture Reduction (depending On Drying Settings) Airflow: Horizontal Or Vertical Airflow (adjustable Based On Tray Configuration) Ventilation: Adjustable Vents For Moisture Release Mobility: Equipped With Caster Wheels For Easy Movement Included Accessories: Spare Heating Elements Tray Cleaning Kit User Manual And Maintenance Guide Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------

Details: Description Invitation To Bid Pb-020-2024 Supply And Delivery Of Technical Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools 1. The Department Of Education, Schools Division Of Ilocos Sur Through The Republic Act No. 11975 – Fy 2024 Gaa (sub-allotment Release Order No. Roi-24-1175) Intends To Apply The Sum Of Two Million Three Hundred Thirty-six Thousand Two Hundred Eighty Pesos (p2,336,280.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Supply And Delivery Of Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools. Bids Received Higher Than The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Project Description Qty. Unit Unit Cost Abc For The Project (in Php) Tvl Tools & Equipment (bread And Pastry Production) 1 Air Compressor With Airbrush Cake Decorating Set (medium) Pc 1 2,414.00 2,414.00 2 Beater (standard) Pc 6 287.00 1,722.00 3 Board, Chopping, 6 Color Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Set 6 920.00 5,520.00 4 Boiler, Double (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) Set 1 1,955.00 1,955.00 5 Bowl, Mixing (6 Pcs/set) Pc 12 2,415.00 28,980.00 6 Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 Pc 6 1,725.00 10,350.00 7 Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tiers Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3: 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Pc 6 1,725.00 10,350.00 8 Cake Turn Table (body Shape: Circular Material: Cast Aluminum Plate. And Cast-iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm) Pc 3 1,265.00 3,795.00 9 Coupler (tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case) Pc 13 207.00 2,691.00 10 Cup, Measuring (for Solid) The Standard 4 Measuring Cup Sizes Are: 1 Cup, 1/2 Cup, 1/3 Cup And 1/4 Cup Set 12 977.00 11,724.00 11 Cup, Measuring, 250 Ml For Liquid Pc 12 632.00 7,584.00 12 Cup, Measuring, 500ml For Liquid Pc 12 747.00 8,964.00 13 Cutter, Dough (stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length: 15 Cm X Width: 11 Cm X Thickness: 1.2mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) Pc 1 402.00 402.00 14 Cutter, Pie (medium) Pc 6 460.00 2,760.00 15 Flour Sifter, Hand Cranked (standard) Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh #30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Pc 6 747.00 4,482.00 16 Grater 4 Sided (s) Pc 6 402.00 2,412.00 17 Knife, Kitchen (s) Pc 6 747.00 4,482.00 18 Knife, Pallet (s) Pc 6 573.00 3,438.00 19 Ladle, 3 0z Pc 6 241.00 1,446.00 20 Loaf Pan Big Pc 6 862.00 5,172.00 21 Loaf Pan, Medium Pc 6 517.00 3,102.00 22 Loaf Pan, Small Pc 6 126.00 756.00 23 Muffin Pan, Big Pc 6 448.00 2,688.00 24 Muffin Pan, Medium Pc 6 414.00 2,484.00 25 Muffin Pan, Small Pc 6 322.00 1,932.00 26 Pie Pan, 10 Inches Diameter Pc 6 517.00 3,102.00 27 Pie Pan, # 6, #8, #10 Set 6 1,265.00 7,590.00 28 Pillars, Cake (big) Pc 6 517.00 3,102.00 29 Piping Bag (100 Pcs Per Pack) (m) Pack 25 241.00 6,025.00 30 Rectangular Pan, (7” X 11”) Pc 4 263.00 1,052.00 31 Rolling Pins (3cm X 10 Cm) Pc 12 402.00 4,824.00 32 Rubber Scraper (m) Pc 12 207.00 2,484.00 33 Sauce Pan 22cm Pc 13 632.00 8,216.00 34 Sheet Pan (m) Pc 15 517.00 7,755.00 35 Spoon, Measuring (plastic) ¼ Teaspoon, ½ Teaspoon, 1 Teaspoon, And 1 Tablespoon Set 26 287.00 7,462.00 36 Spoon, Wooden (s) Pc 15 92.00 1,380.00 37 Strainer Stainless (m) Pc 15 212.00 3,180.00 38 Tip, Decorating X 24 (small To Large) Set 23 632.00 14,536.00 39 Weighing Scale, 10 Kgs (digital) Pc 13 2,875.00 37,375.00 40 Weighing Scale,5 Kgs, (digital) Pc 13 1,265.00 16,445.00 41 Wire Whisk, Medium Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Pc 13 286.00 3,718.00 Sub Total 259,851.00 Tvl Tools & Equipment (computer System Servicing) 42 Allen Wrench (set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm;) Set 50 450.00 22,500.00 43 Anti-static Device (anti-static Wrist Strap) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor Pc 50 250.00 12,500.00 44 Combination Pliers, 8" Pc 50 350.00 17,500.00 45 Crimping Tool (rj 11/45) Pc 52 450.00 23,400.00 46 Desoldering Pump (plastic Or Aluminum Housing) Pc 52 250.00 13,000.00 47 Electric Drill, Portable (rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts) Pc 4 4,000.50 16,002.00 48 External Optical Drive Cd-r Dvd-r (interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd) Pc 6 1,000.00 6,000.00 49 Flash Drive (1tb) Pc 52 850.00 44,200.00 50 Flashlight, Head-mounted (rechargeable) Minimum Of 160 Lumens; Beam Distance: Minimum Of 150 Meters; Includes 220 V Ac Charger/power Adaptor (or Equivalent) Pc 50 550.00 27,500.00 51 Hub / Switch ( Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix External Power Supply Adapter: 100-240vac,50/60hz Fanless Data Rates: 10/100mbps At Half Duplex; 20/200mbps At Full Duplex Led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 Dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) Pc 42 2,000.00 84,000.00 52 Lan Cable Tester (1. Package Contents: 8-port 10/100mbps Desktop Switch, Power) Pc 50 252.00 12,600.00 53 Long Nose Pliers, 8" Pc 50 200.00 10,000.00 54 Multimeter, Digital (auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Overload Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5 Pc 40 800.00 32,000.00 55 Patch Panel (48 Ports) Cat6 Cable Material: Abs Plastic Application: Utp(unshielded) Certification: Rohs, Iso, Ce Rj45 Connector: Two Rows (1-24 Ports & 25-48 Ports) Transport Package: 1pcs/box Pc 50 2,500.00 125,000.00 56 Pc Video Camera (5.0 Mega Pixel Web Camera, Usb-type; With Microphone For Laptop And Desktop Pc Use; Resolution: At Least 640 X 480; Support Windows Xp/7/8/equivalent Mac Os Or Later Versions) Pc 20 500.00 10,000.00 57 Phillip’s Screwdriver, 8" Insulated Pc 50 250.00 12,500.00 58 Precision Screwdriver Set (1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1; 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet; Plastic Storage Case;) Set 50 500.00 25,000.00 59 Soldering Iron, 60w Pc 50 250.00 12,500.00 60 Standard Screwdriver (flat), 8” Insulated Pc 50 250.00 12,500.00 61 Uninterruptible Power Supply (ups) Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof Voltage: Nominal Input Voltage: 230v, 50/60hz Output Power Capacity: 600va (minimum) Pc 40 4,000.00 160,000.00 62 Usb External Hd 1tb Pc 10 3,500.00 35,000.00 63 Wire Stripper (10 Awg To 24 Awg Length: 7 Inches (minimum) Pc 54 250.00 13,500.00 64 Wireless Access Point ( Access Point Dual Band Wi-fi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) Pc 50 1,500.00 75,000.00 Subtotal 802,202.00 Tvl Tools & Equipment (cookery) 65 Apple Corer (material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Pc 10 444.00 4,440.00 66 Bain Marie, Table ( Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 4 20,700.00 82,800.00 67 Blender, Electric (material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220volts/ 240volts, 50hz/ 60hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades) Pc 4 2,875.00 11,500.00 68 Board, Chopping/cutting, Plastic (board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) Pc 20 289.00 5,780.00 69 Boiler, Double (stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Sides Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 3 Liters (minimum) Pc 2 2,128.00 4,256.00 70 Braising Pan, Medium Pc 10 1,494.00 14,940.00 71 Can Opener (stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Pc 4 242.00 968.00 72 Casserole, Medium Pc 10 702.00 7,020.00 73 Casserole, Small Pc 12 669.00 8,028.00 74 Colander, Medium Pc 10 340.00 3,400.00 75 Colander, Small Pc 10 303.00 3,030.00 76 Cup, Measuring (for Solid) (cup, 1/2 Cup, 1/3 Cup, 1/4 Cup And 1/8 Cup.) Set 10 518.00 5,180.00 77 Dispenser, Paper Towel (abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Pc 10 403.00 4,030.00 78 Stand Fan, Electric (metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220/240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Pc 5 1,495.00 7,475.00 79 Fire Extinguisher (with Contents) Capacity 5 - 6 Kgs Rechargeable Cylinder Metal Working Pressure Of Cylinder: 400 Psi Pc 1 2,875.00 2,875.00 80 Fish Poacher, Medium (oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm) Pc 10 2,076.00 20,760.00 81 Fork, Carving (square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prongs Comes With Square - Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle) Pc 10 593.00 5,930.00 82 Fork, Kitchen (body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End Pc 10 248.00 2,480.00 83 Frying Pan, Large Pc 10 438.00 4,380.00 84 Frying Pan, Medium Pc 10 334.00 3,340.00 85 Frying Pan, Small Pc 12 296.00 3,552.00 86 Funnel, S/s, Medium Pc 10 242.00 2,420.00 87 Funnel, S/s, Small Pc 10 207.00 2,070.00 88 Garbage Bin (material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel) Pc 4 863.00 3,452.00 89 Glass Rack (body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 ½ Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case) Pc 12 817.00 9,804.00 90 Ice Cream Scooper (medium) Pc 2 288.00 576.00 91 Knife, Boning (28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets) Pc 10 564.00 5,640.00 92 Knife, Chef (chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) Pc 10 449.00 4,490.00 93 Knife, Cleaver (forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets) Pc 10 552.00 5,520.00 94 Knife, Oyster (stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) Pc 10 547.00 5,470.00 95 Light, Emergency (metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector ) Pc 1 2,013.00 2,013.00 96 Meat Slicer (die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 10 3,220.00 32,200.00 97 Pastry Tube (standard) Pc 10 633.00 6,330.00 98 Peeler, Y-type (stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Pc 10 275.00 2,750.00 99 Pepper And Salt Mill (round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices) Pc 10 1,380.00 13,800.00 100 Piping Bag (transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) Pc 10 242.00 2,420.00 101 Plate Rack (body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) Pc 12 2,099.00 25,188.00 102 Preparation Table With Sink (stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) Pc 10 4,485.00 44,850.00 103 Pressure Cooker (polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring) Pc 2 5,520.00 11,040.00 104 Roasting Pan (medium) Pc 10 1,840.00 18,400.00 105 Scissor, Kitchen (body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) Pc 10 448.00 4,480.00 106 Siever, Small (stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Pc 10 677.00 6,770.00 107 Skimmer, Fine (stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Pc 10 758.00 7,580.00 108 Skimmer, Spider (stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm(minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Pc 10 472.00 4,720.00 109 Soup Cup Rack (polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm) Pc 12 1,553.00 18,636.00 110 Soup Ladle, 12 Oz Pc 10 472.00 4,720.00 111 Soup Ladle, 3 Oz Pc 10 300.00 3,000.00 112 Soup Ladle, 6 Oz Pc 10 403.00 4,030.00 113 Soup Ladle, 8 Oz Pc 10 455.00 4,550.00 114 Spatula (stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches) Pc 8 294.00 2,352.00 115 Spoon, Kitchen (stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type) Pc 8 403.00 3,224.00 116 Spoon, Kitchen (slotted) Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Pc 8 386.00 3,088.00 117 Spoon, Measuring (body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. (7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) Set 8 291.00 2,328.00 118 Spoon, Parisienne Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Pc 8 301.00 2,408.00 119 Spoon, Serving (stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Pc 24 365.00 8,760.00 120 Spoon, Wooden Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Pc 8 92.00 736.00 121 Stock Pot, Large (stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. Pc 5 2,703.00 13,515.00 122 Strainer Chinois, Small Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Pc 5 380.00 1,900.00 123 Strainer Chinois, Medium (stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Pc 5 420.00 2,100.00 124 Strainer Medium, Fine Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Pc 8 248.00 1,984.00 125 Strainer Small, Fine Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Pc 8 240.00 1,920.00 126 Tenderizer, Medium Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Pc 8 559.00 4,472.00 127 Thermometer, Pocket /pin Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f Pc 10 880.00 8,800.00 128 Tong, 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 10 322.00 3,220.00 129 Tong, 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Pc 10 291.00 2,910.00 130 Tray, Baking, Small Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Pc 10 548.00 5,480.00 131 Tray, Utility Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Pc 12 644.00 7,728.00 132 Turner 3" X 6" Pc 10 541.00 5,410.00 133 Utility Cart Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Pc 2 14,713.00 29,426.00 134 Weighing Scale, 1 Kg, Digital Engineering Plastic And Stainless-steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm) 163 Mm X 245 Mm X 79 Mmm (minimum) Pc 6 1,630.00 9,780.00 135 Weighing Scale, 5 Kg Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Pc 10 1,794.00 17,940.00 136 Wire Skimmer, Small Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Pc 10 408.00 4,080.00 137 Wire Whisk, Heavy Duty: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Pc 2 564.00 1,128.00 138 Wire Whisk, Medium Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 488.00 4,880.00 139 Wire Whisk, Small Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 372.00 3,720.00 140 Wok, Medium: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Pc 10 771.00 7,710.00 141 Wok, Small Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Pc 10 679.00 6,790.00 142 Working Table Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Pc 5 13,628.00 68,140.00 143 Zester Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe Pc 10 397.00 3,970.00 Sub Total 702,982.00 Tvl Tools & Equipment (food And Beverages Services) 144 Chair, Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box Pc 50 1,955.00 97,750.00 145 Coffee Pot, 2 Pints Round Material: Stainless Steel With Cover Capacity: 2 Pints Outside Diameter: 90 -110 Mm Over-all Height: 200 - 230 Mm Thickness: 0.5 - 1 Mm Pc 4 1,139.00 4,556.00 146 Container, Creamer Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height: 80 - 105 Mm Color: White Pc 10 288.00 2,880.00 147 Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality Packed In Carton Box Pc 24 403.00 9,672.00 148 Fork, Cocktail Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Type: Rounded Tip Handle Over-all Length: 110 - 165 Mm Width: 20 - 30 Mm (minimum) Handle Thickness: 2 Mm To 4 Mm Handle Length: 75 - 90 Mm Small, Colo: Silver The Item Must Be Branded And Have Good Quality. Pc 24 173.00 4,152.00 149 Fork, Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150 Mm - 175 Mm Width: 20 – 30mm Handle Thickness: 1.5mm - 3 Mm Number Of Tines: 4 Handle: 130 Mm (minimum) Color: Silver Pc 24 173.00 4,152.00 150 Fork, Dinner Fork Body Shape: Fork Shape Material / Appearance: Stainless Steel, Highly Polished, With 4tines Over - All Length: 120 - 175 Mm Thickness Of Handle: 2 - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality Pc 24 196.00 4,704.00 151 Fork, Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180 - 215 Mm Fork Width: 1.5 Mm - 3 Mm Fork Thickness: 1 Mm - 2 Mm Number Of Tines: 4 Length Handle: 120 - 130 Mm Handle Thickness: 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Pc 24 288.00 6,912.00 152 Fork, Oyster (4 To 5-1/2 Inches In Overall Length.) Pc 24 173.00 4,152.00 153 Glass, Champagne Flute Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Pc 24 288.00 6,912.00 154 Glass, Collins Tumbler Body Shape: Round Material: Clear Glass Capacity: 10 Oz To 14 Oz Thickness: 1.5 -3 Mm (minimum) Packed In Carton Box Pc 24 173.00 4,152.00 155 Glass, Juice / Hi- Ball Material: Clear Glass Type: Hi-ball Height: 140 - 160 Mm Bottom Diameter: 50 -70 Mm Top Diameter: 50 - 70 Mm Thickness: 2 - 4 (minimum) Capacity: 8 Oz. To 10 Oz. Dishwasher Safe The Item Must Be Branded And Good Quality Pc 24 518.00 12,432.00 156 Glass, Pilsner (iced Tea Glass) Type: Flared Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass: 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality Pc 24 288.00 6,912.00 157 Glass, Red Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity: 250 -300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 85 - 90 Mm Base Diameter: 75 - 85 Mm Base Thickness: 2 - 4 Mm Pc 24 403.00 9,672.00 158 Glass, White Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 - 3 Mm Over -all Length: 200 -220 Mm Capacity: 270 - 300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 75 - 85 Mm Base Diameter: 70 - 80 Mm Base Thickness: 2 - 5 Mm Pc 24 443.00 10,632.00 159 Gravy Boats Boat Shape With Handle Material: Stainless Steel Capacity: 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Pc 4 225.00 900.00 160 Ice Bucket, 2 Liters With Tongs Circular Set Includes: Ice Bucket Material: Stainless Steel Diameter: 140 - 180 Mm Height: 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity: 2 Liters (minimum) Pc 5 471.00 2,355.00 161 Knife, Butter Stainless Steel W/ Highly Polished Appearance Over-all Length: 140 Mm - 150 Mm Handle Thickness: 3 Mm - 5 Mm With Dull Edge And Rounded Tip Pc 24 127.00 3,048.00 162 Knife, Dinner Flat With Round Tip Material / Appearance: Stainless Steel Blade Highly Polished Handle Material: Stainless Steel Overall Length: 160 - 190 Mm Blade Thickness: 2 - 4 Mm Handle Thickness: 3 - 6 Mm Pc 24 213.00 5,112.00 163 Knife, Fish Flat With Pointed Tip Material / Appearance: Stainless Steel, Highly Polished W/ Plain Design Overall Length: 200 - 220 Mm Width Blade: 20 - 25 Mm Thickness Of Blade: 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 164 Menu Folder (a4 (297mm X 210 Mm) And A5 (210 Mm X 148 Mm) Pc 5 518.00 2,590.00 165 Napkin Holder Rectangular Material: Stainless Steel With Highly Polished Appearance Dimension: Width: 70 - 90 Mm X Length: 150 - 170 Mm Thickness: 0.7 Mm -2 Mm Packed In Plastic Pouch Pc 6 247.00 1,482.00 166 Order Pads Rectangular Material: 80gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Pc 5 58.00 290.00 167 Pepper And Salt Mill: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Pc 20 1,380.00 27,600.00 168 Plate Covers Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Pc 8 305.00 2,440.00 169 Plate, Dessert, 7”to 8” Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color: White Inner Diameter: 145 To 165 Mm Thickness: 3 To 6 Mm Pc 24 207.00 4,968.00 170 Plate, Dinner, 10” Circular Material: Porcelain With No Design Color: White Inner Diameter: 200 Mm - 215 Mm Outer Diameter: 250 - 260 Mm Thickness: 3 Mm - 6 Mm Pc 24 437.00 10,488.00 171 Plate, Fish, 8” To 9” Circular Material: Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color: White Inner Diameter: 165 Mm - 190 Mm(minimum) Thickness: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 172 Round Table (8's) (54” Or 60”) Pc 10 9,034.00 90,340.00 173 Salad Forks (6” Long) Pc 24 127.00 3,048.00 174 Salad Knife 8” Pc 24 207.00 4,968.00 175 Salad Plates 7” To 8” Pc 24 242.00 5,808.00 176 Salt And Pepper Shakers Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Pc 4 207.00 828.00 177 Sauce Ladles Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Pc 10 403.00 4,030.00 178 Server, Cake Stainless Steel Blade, Highly Polished Appearance 2. Over-all Length: 220 To 270 Mm 3. Width: 60 - 80 Mm 4. Thickness: 1.5 Mm To 2 Mm 5. Handle: 120 -140 Mm Long, Non-toxic Plastic 6. Shape: Shovel-shaped 7. Color: Silver Pc 10 571.00 5,710.00 179 Service Forks : Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Pc 6 207.00 1,242.00 180 Service Tray: Rectangular Material: Plastic (pp) Size: 14 Inches X 18 Inches X 1 Inch (minimum) Colo: Any Pc 6 518.00 3,108.00 181 Show/service/ Base Plates 11” To 14” Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Set 6 1,208.00 7,248.00 182 Side Plates Or Bread Plates 6” Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness: 3 Mm - 6mm Pc 24 242.00 5,808.00 183 Side Towels Rectangular Material: Oxford Polyester Soft Cloth Over-all Length: 640 - 680 Mm Over-all Width: 420 -460 Mm Color: Plain White Pc 10 349.00 3,490.00 184 Silver Platter Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Pc 10 570.00 5,700.00 185 Soup Bowl Circular Material: Porcelain Capacity: 24 Oz. (minimum) Pc 24 437.00 10,488.00 186 Soup Ladle Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Pc 10 366.00 3,660.00 187 Soup Tureen Round Material: Stainless Steel Capacity: 7 - 11 Quart Size: 60 X 35 X 32 Cm (minimum) Pc 10 695.00 6,950.00 188 Spoon, Dessert Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length: 175 To 190 Mm Thickness: 2 Mm - 3 Mm Shorter Handle: 120 -130 Mm Color: Silver Pc 24 125.00 3,000.00 189 Spoons, Service Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Pc 6 136.00 816.00 190 Spoons, Soup (cream And Consume) Round Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length: 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Pc 24 160.00 3,840.00 191 Steak Knife (5”) Pc 24 251.00 6,024.00 192 Sugar Container Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Pc 10 288.00 2,880.00 193 Tablecloth, 54 X 54 Inches Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 942.00 9,420.00 194 Tablecloth, 64x64 Inches Rectangular Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 1,208.00 12,080.00 195 Table Napkins, Cloth, 16” X 16” Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Color: Plain White Pc 60 424.00 25,440.00 196 Table Skirting Cloth Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch Pc 10 2,185.00 21,850.00 197 Table, Square/rectangular (4's Or 6's) Square/rectangle Materia: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Pc 4 5,382.00 21,528.00 198 Tea Pot, 2 Pints Porcelain Type Body Shape: Round With Handle And Pouring Spout Material: Porcelain Capacity: (2 Pint) Color: White Pc 10 1,139.00 11,390.00 199 Teaspoon Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Pc 24 92.00 2,208.00 200 Tong, 8 Inches Standard Material: Stainless Steel Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 7 291.00 2,037.00 201 Tooth Pick Holder Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch Pc 10 101.00 1,010.00 202 Tray Stand Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Pc 5 2,282.00 11,410.00 203 Tray, Bill Folders/ Change Height: 190 - 220 Mm 3. Width: 120 -140 Mm 4. Thickness: 2 Mm To 3 Mm (minimum) 5. Color: Black Pc 5 271.00 1,355.00 204 Tray, Round (bar) Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Pc 8 443.00 3,544.00 205 Water Goblet Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Pc 24 124.00 2,976.00 206 Water Pitcher Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Pc 10 516.00 5,160.00 Sub Total 571,245.00 Total Amount 2,336,280.00 2. The Department Of Education, Schools Division Of Ilocos Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days. Bidders Must Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criteria As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Deped, Schools Division Of Ilocos Sur, And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. Until 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22-december 10, 2024 (until 9:00 A.m.) From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb Amounting To Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Deped, Schools Division Of Ilocos Sur Will Hold A Pre-bid Conference On November 29, 2024, At 10:00 A.m. At The Schools Division Office, Bantay, Ilocos Sur, And/or Through Videoconferencing/webcasting Via Google Meet Using The Link: Https://meet.google.com/tjb-zntu-yys Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 12, 2024, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 12, 2024, At 9:01 A.m. At The Given Address Below And/or Through And/or Virtual. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Deped, Schools Division Of Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Before Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marillac D. Quinsaat Head – Bac Secretariat Department Of Education, Schools Division Of Ilocos Sur Zone V, Bantay, Ilocos Sur, 2727 Email Address: Ilocos.sur@deped.gov.ph 12. You May Visit The Website/s: For Downloading Of Bidding Documents: Depedilocossur.info Date Of Issue: November 22, 2024 Joye D. Madalipay, Ceso Vi Chairperson, Bids And Awards Committee