Painting Tenders

Details: Description 1. The Department Of Education – Division Of Tangub City, Through The General Appropriations Act 2024 Intends To Apply The Sum Of Three Million Nine Hundred Seventy-eight Thousand One Hundred Six Pesos (php 3,978,106.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools With Identification Number Tvl - 2024 – Rx – Tangub City – 030. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Item Description Abc Lot 1. Lorenzo Tan National High School (caregiving Nc Ii)- Php 400,403.00 5 Piece Airpot 1.type: Water Heater 2. Outer Material: Hard Plastic, (pp) Polypropylene, Heat Resistant 3.cavity Material: Stainless Steel 4. Capacity: 2.5 Liters 5.voltage: 220/240/volts 6.ac 50/60 Hz. Power In Watts: 500 To 800 Watts 7.comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 8. The Item Must Be Branded And Good Quality. 10 Piece Apron 1.type: Bib Apron 2. Material: Polyester-cotton Fabric 3.length: 20 To 40 Inches (minimum) 4. With 2 To 3 Bottom Pockets; 5.color: Any 6.the Item Must Be Of Good Quality 2 Piece Bath Tub, Baby 1. Material: Hard/sturdy Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: (l X W X H) 670 To 700 Mm X 400 To 420 Mm X 160 To 190 Mm (minimum) 4. Thickness: 3 Mm To 6 Mm (minimum) 5.color: The Item Must Be Of Good Quality 10 Piece Baby Blanket 1. Type: Blanket 2. Material: 100% Cotton 3.color: White 4. Dimension: (l Xw) 38 To 42 Inches X 28 To 32 Inches (minimum) 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Basin (small) 1.material: Hard Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: 280 - 320 Mm Diameter X 80 - 120 Mm Higher (mimimum) 4. Thickness: 2 Mm To 4 Mm (minimum) 5. The Item Must Be Of Good Quality 20 Piece Bath-towel, Towellete 1. Type: Bath Towel 2. Material: 100% Cotton 3.color: White 4. Dimension: ( L X W ) 120 - 125 Cm X 60 - 65 Cm (minimum) 5.washable 6.the Item Must Be Of Good Quality 5 Piece Bedpan 1.material: Hard Plastic, (ps) Polystyrene 2. Color: Any Color 3.dimension: ( L X W X H) 22 - 26 Cm X 27 - 32 Cm X 7 - 12 Cm (minimum) Approximate 4. Capacity: 1 Liter (minimum) 5.thickness: 2 To 5 Mm 6.saddle-shaped And Lightweight 7. The Item Must Be Of Good Quality 10 Piece Blanket 1. Type: Blanket 2. Material: Cotton 3.color: White 4. Dimension: (l X W) 80 - 90 Inches X 54 -64 Inches Approximate 5. Washable 6. The Item Must Be Of Good Quality 3 Piece Bottle Sterilizer, Electric 1. Type: Electric Steam Sterilizer 2. Material: Hard Plastic (p E) Polyethylene Or Its Equavalent 3.color: Any Color 4. Capacity: 6 Bottles (minimum) 5.sterilizes Bottle And Accessories By Steam 6. With Automatic Power Shut-off Function 7. Dimensions: 8. Power Supply: 220 V-240v Ac, 50/60 Hz. 9. The Item Must Be Of Good Quality 5 Piece Bread Toaster 1. Type: Electric Bread Toaster 2. Dimensions ( W X D X H): 25 - 30 Cm X 15 -20 Cm X 18 - 22 Cm (minimum) Approximate 3. Capacity: 2 Slices 4. Power Supply: 220v-240v Ac, 50/60 Hz. 5. 400 To 600 W (minimum) 6. The Item Must Be Of Good Quality 10 Piece Burping Cloth 1. Type: Burping Cloth 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: Length: 17 -19 Cm Width: 14 -16 Cm (minimum) 5.washable 6. The Item Must Be Of Good Quality 10 Piece Cane 1.type: Adjustable Offset-walking Cane 2. Material: Aluminum 3.tip Size: 18 4. Height Adjustment: 31 Inches To 39 Inches (with 1 Inch. Increment) 5.weight Capacity: 200 - 250 Lbs. (minimum) 6.with Rubber Handle; With Push-botton Height Adjustment 7. The Item Must Be Of Good Quality 5 Piece Carpet 4ft. X 8 Ft 1.material: Polyster 2. Color: Any Patterned Color 3.dimension:48 Inches X 96 Inches (minimum) 4.the Item Must Be Of Good Quality 5 Set China Ware 1.material: Porcelain 2. Fit To Be Used In Ovens And Microwaves 3.specific Dimensions: Dinner Plate Diameter: 10 Inches (minimum) 4. Salad Plate Diameter: 7 Inches (minimum) 5.bowl Diameter: 5 Inches (minimum) 6.mug: 12 Oz. (minimum) 7. The Item Must Be Of Good Quality 8. Set Includes: 1 Piece Dinner Plate, 1 Set Salad Plate, 1 Piece Bowl, 1 Piece Mug 10 Piece Clothes Brush 1. Type: Rectangular Clothes Brush 2. Handle Material: Wood 3. Bristle Material: Plastic Bristle 4. Color: Any Color 5.overall Dimension: ( L X W X H) 140 -160 Mm X 45- 60 Mm X 20 -30 Mm (minimum) 6. The Item Must Be Of Good Quality 10 Piece Clothes Hamper 1. Type: Square Hamper 2. Material: Polyester 3. Color: Any Color 5. Dimension: ( L X W X H) 32 To 34 Cm X 36 To 38 Cm X 56 To 58 Cm (minimum) 5. The Item Must Be Of Good Quality 2 Piece Clothes Rack 1.type: Single-pole Clothes Rack 2. Material: Stainless Steel 3. Dimension: ( L X W X H) 30 To 32 Inches X 14 To 38 Inches X 62 To 64 Inches (minimum) 4. Comes With 4 Caster Wheels 5. The Item Must Be Of Good Quality 3 Piece Comforter 1.type:comforter 2. Material: Polyester 3.color: Any Color 4. Dimension: ( L X W) 84 To 88 Inches X 62 To 65 Inches (minimum) 5.thickness: 20-30 Mm (minimum) 6.washable 7. The Item Must Be Of Good Quality 3 Piece Commode 1.type: Foldable Commode 2. Durable Plastic Snap- On Seat And Lid Withouot Pushing Buttons 3. Blue Powder-coated Steel-welded Construction 4. Plastic Arms For Added Comfort 5.comes Complete With 12 Qt. Commode Bucket With Carry Handle, Cover And Splash Shield 6. Specifications: Width 18 Inches Between Arms/ 22.5 Inches Outside Approximate 7. Set Dimensions: W 32 -36 Cm X D 35 -40 Cm, Height 38 -54 Cm Approximate 8. Weight 13 Lbs., Weitgh Limit 350 Lbs. 9. The Item Must Be Of Good Quality 5 Set Cooking Utensils 1. Material: Stainless Steel 2. The Set Is Comprised Of Ff:; 1 Pc. -16 X 9.5 Cm Sauce Pan With Glass Lid (minimum) 3. 1 Pc. - 16 X 95 Cm Casserole With One Glass Lid, (minimum) 4. 1 Pc. - 18 X 10.5 Cm Casserole With Glass Lid, (minimum) 5.1 Pc. - 20 X 11. 5 Cm Casserole With Glass Lid, (minimum) 6. The Item Must Be Of Good Quality 2 Piece Crutches, Adjustable 1.type: Adjustable Crutches 2. Set Includes: 3 Pcs./set 3.material: Aluminum Powder-coated 4. Color: Any Color 5.weight Capacity: 300 Lbs. (minimum) 6. Dimensions: Youth Size 7. User Heights: 4 Ft. 6 Inches To 5 Ft. 2 Inches 8. Underarm Height: 37 Inches To 46 Inches 9. Adult Size: User Heights: 5 Ft. 2 Inches To Ft. 10 Inches 10. Underam Heights: 45 Inches To 53 Inches 11. Tall Adult Size: User Heights: 5 To 10 Inches 12. Underam Height: 53 Inches To 61 Inches 13. The Item Must Be Of Good Quality 10 Piece Cutlery 1.material: Stainless Steel 2. 20 Pieces Set For 4 3. 4 Dinner Knives 4. 4 Dinner Forks 5. 4 Dinner Spoons 6. 4 Salad Forks 7. 4 Tea Spoons 8. The Item Must Be Of Good Quality 10 Piece Cutting Board, Plastic 1. Material: Polyethylene Plastic 2. Color: Any Color 3. Dimension: ( L X W X H) 240 - 260 Mm X 140 - 160 Mm X 10 - 15 Mm (minimum) 4. Reversible Cutting Surface 5. The Item Must Be Of Good Quality 10 Piece Digital Thermometer, 32 C-42.9 C (90.0f-109.9f 1. Case Material: Hard Plastic (pe) Polyethylene 2. Color: Any Color 3. Range: 32 C - 42.9 C (90.0f-109.9f) 4. Accuracy: + 0.1c 35.5c-42.0c(+ 0.2 F 95.9f-107.6f) 5. Battery Operated 6.memory: Last Measuring Reading 7.alarm: Approx. 10 Seconds Sound Signal When Peak Temperature Reached. 8. The Item Must Be Of Good Quality 2 Piece Dressing Trolley 1.material: Shelves: Powder-coated Steel Sheet 2. Dimensions: ( W X D X H) 48 - 50 Cm X 48 - 50 Cm X 83 - 85 Cm (minimum) 3.number Of Shelves: 2 4. With Four Revolving Castors, Two Lockable 5. The Item Must Be Of Good Quality 10 Piece Electric Knife 1. Type: Electric Knife 2. Material: Stainless Steel And Hard Plastic, (pe) Polyethylene 3. Power Supply: 220/240 Volts, Ac 50/60 Hz. 4. Dimensions: 4.25 X 2.75 X 11.88 Inches (minimum) 5.comes With Touch Button Control, Safety Lock And English User & 39;s Manual 6. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 7. The Item Must Be Of Good Quality 10 Piece Face Towel/towellete 1. Type: Face Towel 2. Material: 100% Cotton 3. Color: White 4. Dimension: ( L X W ) 28- 32 Cm X 28 -32 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Feeding Bottle Brush 1. Bristle Material: Nylon 2. Color: Any Color 3. Handle Material: Hard Plastic, (ps) Polystyrene 4. Total Length: 280 -320 Mm (minimum) 5. Fit With The Standard Feeding Bottle For The Baby 6.comes With Nipple Brush 7. Washable 8. The Item Must Be Of Good Quality 5 Set Feeding Utensils (child) 1.material: Hard Plastic, (ps) Polystyrene 2. Sets Includes: 6 Pcs./set 3. 1 Pc Knife 4. 1 Pc- Plate 5. 1 Pc. -bowl 6. 1 Pc. - Cup 7. 1 Pc. -fork 8.1 Pc. - Spoon 9. Color: Any 10. The Item Must Be Of Good Quality 7 Set First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1 Pc; Sterize Gauge Swab (4x 4 X 12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band-aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5 Cm X 5 Cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90 Cm X 90 Cm X 120 Cm, 2 Pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2 Pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2 Pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5 Cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms, 2 Pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2-3 Years Expiration, 1 Tube; Medical Tweezers Min. 8 Cm, Plastic, 2 Pcs; Plastic Bags, Resealable, Minimum Of 24 Pcs, 100mm X 180mm, 24 Pcs, 150mm X 230mm; Cotton Balls, 50 Balls In A Sealed Package, 2 Packs; Hot And Cold Pack, Reusable, 1 Pack; Water Resistant And Sturdy Case W/ Handle That Can Accomodate All The Listed Items. 20 Piece Flat Sheet 1.type:bed Sheet 2. Material: 100% Cotton 3. Color: White 4. Dimension: Width - 137 - 145 Cm Length - 180 -200 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: 4 Gallons ( Minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With Packing Case Color: Any Color Smooth And No Rough Surfaces 20 Box Gloves, Rubber (15 Mils) Medium Size (#8) Super Nitrile, Flocklined Interior (acid/solvent Resistant) Individually Packed For Hand Protection 10 Box Gloves, Surgical (disposable) 1.material: Latex 2. Color: White 3. Thickness: .09 Mm (minimum) 4. Disposable And Sterile 5. The Item Must Be Of Good Quality 20 Piece Gown (hospital) 1.type:unisex Hospital Gown 2. Material: Polyester- Cotton 3. Color: Any Color 4. Size: One Size Fits All 5. Comes With Overlap Back Closure 6. The Item Must Be Of Good Quality 5 Set Grooming Kit (hairbrush Comb, Nail Cutter, Nail Brush) 1. Set Includes: 6 Pcs./ Set (minimum) 2. Materials: Stainless Steel And Hard Plastic 3. 2 Nail Clippers/ Trimmers Of Different Sizes 4.1 Multipurpose Scissors 5. 1 Ear Pick 6. 1 Tweezer 7. 1 Comb 8. The Item Must Be Of Good Quality 10 Piece Hand Towel 1. Type: Hand Towel 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: ( L X W) 65 -75 Cm X 32 -42 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 3 Piece High Chair/booster Seat/ Portable Seat 1. Material: Foldable Powder Coated Steel Frame Or Its Equavalent 2. Phone Type: Corded 3. Polyester Harness, Seat/back Cushion 4. Overall Dimensions: ( L X W) 65 -75 Cm X 50 -60 Cm X 90 - 102 Cm (minimum) 5. Capacity: 40 Lbs. (minimum) 6. With 3-position Seat Recline 7. The Item Must Be Of Good Quality 10 Piece Hot Water Bag 1. Material: Rubber Or Its Equavalent 2. Color: Any Color 3. Overall Dimension: (lxw) 200- 300 Mm X 150 -200 Mm (minimum) 4. Leak-proof And Washable 5. The Item Must Be Of Good Quality 10 Piece Kettle 1. Material: Heat-resistant Hard Plastic 2. Capacity: 1- 1.5 Liters (minimum) 3. Height: 25-35 Cm (minimum) Approx 4. Voltage: 220/240 Volts, Ac 50/60 Hz 5. Power In Watts: 1000 To 1500 Watts 6.comes With Automatic Shut-off Feature And Permanent Water Level Indicator 7. Pitcher-type With Pouring. 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 9. The Item Must Be Of Good Quality 10 Set Measuring Cups .. 1/4, 13, 1/2 1 Cup Set 1. Materials: Stainless Steel 2. Set Includes: 4 Pcs./set; 3. 1 Pc. - 1/4 Cup (60 Ml) 4. 1 Pc- -1/3 Cup (80ml) 5. 1 Pc.- 1/2 Cup (125 Ml) 6. 1 Pc. - 1 Cup ( 250 Ml) 7. Thickness: .5 Mm To 1 Mm (minimum) 8. The Item Must Be Of Good Quality 10 Piece Medical Tray 1. Type: Tray 2. Material: Stainless Steel 3. Overall Dimension: (lxw X D) 300- 350 Mm X 200 -250 Mm X 12 - 19 Mm (minimum) 4. Thickness: .7 To 1 Mm (minimum) 5. The Item Must Be Of Good Quality 2 Set Mixing Bowl, Stainless, 6-piece Set 1. Material: Stainless Steel 2. Quantity Of Set: 6 Pcs./set 3. Dimension: 3/4 Qt., 1.5 Qt., 3 Qt., 4 Qt., 5 Qt., 8 Qt., 4. The Item Must Be Of Good Quality 10 Piece Pail, Plastic, 10 Liters 1. Material: Polyethylene Plastic 2. Dimension: 25-30 Cm Diameter X 23-27 Cm Depth (minimum) 3. Color: Any Color 4. Chromed Finished Handle 5. Capacity: 10 Liters (minimum) 6. Material Must Be Non-toxic 7. The Item Must Be Of Good Quality 10 Piece Pans 1. Type: Frying Pan 2. Material: Stainless Steel 3. Handle: With Hard Plastic Heat Insulation 4. Tempered Glass Lid With Steam Hole 5. Size 23 -26 Cm With Lid 6. The Item Must Be Of Good Quality 10 Piece Peeler 1. Type: Peeler 2. Blade Material: Stainless Steel 3. Handle Material: Stainless Steel 4. Overall Dimensions: 18 X 8 Cm (minimum) 5. Comes With Self-locking 6. The Item Must Be Of Good Quality 10 Piece Pick Up Forcep 1. Type: Curved Forceps 2. Material: Stainless Steel 3. Overall Length: 100-130 Mm (minimum) 4. Comes With Self-locking 5. The Item Must Be Of Good Quality 10 Piece Pillow 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Pillow Case 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Portable Mixer 1. Type: Portable Mixer 2. Material: Stainless Steel, Clear Acrylic 3. Capacity: 16-18 Oz. (minimum) 4. Size: 170 - 220 Mm X 75- 100 Mm 5. Requires 2 Aaa Batteries 6. Power In Watts: 250 To 300 Watts 7. The Item Must Be Of Good Quality 10 Piece Potato Masher 1. Type: Portable Masher 2. Material: Stainless Steel And Hard Plastic 3. Mesh Head Diameter: 70-90 Mm (minimum) 4. Overall Length: 250 - 270 Mm (minimum) 5. Handle Length: 120-140 Mm (minimum) 6. Washable 7. The Item Must Be Of Good Quality 5 Set Pots 1. Type: Cooking Pot 2. Material: Stainless Steel 3. Set Includes: 4 Pcs./set 4. 1 X Pot With Lid 5. 1 X Pan With Lid 6. 1 X Strainer 7. 1 X Egg Streamer 8. Size: (l X W X H) 40 To 42 Cm X 12 To 14 Cm X 26 To 28 Cm 9. The Item Must Be Of Good Quality 5 Piece Skillet 1. The Item Shall Have The Following Specifications. Material Including Handle: Cast Iron 2. Color: Any Color 3. Dimension ( Dia. X Depth): 250 - 320 Mm X 50 - 70 Mm (minimum) 4. Handle Casted With The Body And Having Plastic Or Rubber Heat Insulator 5. Body Thickness: 1.5 - 3 Mm (minimum) 6. Washable 7. The Item Must Be Branded And Have Good Quality. 5 Piece Sphygmomanometer 1. Type: Aneroid 2. Material: Nylon Cuff And Inflation Bag, Die - Cast Zinc Manometer 3. Package Inlcluded: 1 X Aneroid Sphygmomanometer. 4. Size: ( L X W X H Cm) = 18 To 20 Cm X 11 To 13 Cm X 11 13 Cm 5. Nylon Zippered Carrying Case 6. Capacity: 0 To 300 Mm Hg 7. The Item Must Have Good Quality. 5 Piece Stethoscope 1. Type: Dual Head Stethoscope 2. Material: Stainless Steel Chestpiece And Eartubes 3. Reinforced Pvc Tubing 4. Soft Pvc Eartips 5. Color: Any Color 6. Bell Diameter: 18-25 Mm Approx. 7. Diaphragm Diameter: 25-50 Mm Approx. 8. Overall Length: 66-75 Cm (minimum) 9. The Item Must Be Of Good Quality 5 Piece Urinal 1. Type: Unisex Portable Urinal 2. Material: Hard Plastic, (pp) Polypropylene 3. Color: Any Color 4. Total Capacity: 28 Oz. Minimum 5. Dimension: ( L X W X H) 270 To 290 Mm X 145 To 160 Mm X 70 To 80 Mm ( Minimum) 6. Thickness: 1 Mm To 3 Mm (minimum) 7. The Item Must Have Good Quality. 5 Piece Vacuum Cleaner 1. Material: Plastic (pp) Polypropylene Or Its Equavalent 2. Color: Any Color 3. Suction Power: 18 To 22 Kpa (minimum) 4. Tank Capacity: 24 Liters (minimum) 5. Vacuum Hose Length: 6 To 8 Ft. (minimum) 6. Power Supply: 220 V - 240 Ac , 50/60 Hz. 7. With Accesories: Extension Wand, Utility Nozzle, Standard Paper Filter 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 9. The Item Must Be Branded And Good Quality 3 Piece Wheel Chair 1. Type: Foldable Wheel Chair 2. Overall Dimensions: ( L X W X H) 40 - 44 Inches X 26 - 30 Inches X 34 - 38 Inches ( Minimum) 3. Folded Dimensions: ( L X W X H ) 40 To 44 Inches X 10 To 14 Inches X 34 To 38 Inches (minimum) 4. Capacity: 350 Lbs. (minimum) 5. With Padded Arm Rests; With Push-to-lock Wheel Brakes 6. The Item Must Be Of Good Quality Lot 2. Sta. Maria National High School (hairdressing Nc Ii)- Php 323,170.00 5 Pcs. Bowl, Mixing, Plastic With 10.5 Cm X 6cm 2 Pcs. Bowl, Shampoo, Stainless Steel Frame, Bowl Dimensions: 19 Inch X 20 Inch X 10 Inch With Hose Attachment Of 7 Ft. 5 Box Box, Hairpin, Metal With 3.5 X 4.5 X 0.5 Inches(100 Pcs Per Box) 5 Pcs. Brush, Applicator, Plastic With 70mm X 80mm 5 Pcs. Brush, Hair, Plastic Bristle And Wooden Handle, Width - 2 Inches 10 Pcs. Cap, Frosting, With Hook, Silicone With 31cm X 22cm,rounded Metal Hook 10 Pcs. Cap, Heating, Waterproof, Cordless With 21-24 Inches 10 Pcs. Cape, Polyester With 125 Cm X 140 Cm 5 Pcs. Chair,high, Metal Painted With Anti Rust With 15 Inches X 33 Inches, Synthetic Leather Seat 5 Pcs. Chair, Hydraulic, Metal Base With 59 Cm X 54 Cm X 51-78cm, 180kg, 360' Rotation 10 Pcs. Clamp, Plastic, Length:9.5cm, Thickness:10mm 10 Pcs. Clamp, Duck Bill, Metal, Length: 11 Cm, Elasticity Stainless Steel Spring 5 Pcs. Clipper, Hair, Body Material: Hard Plastic, Blade Material: Carbon Steel, 6 Watts 10 Pcs. Comb, Afro, Plastic, Length: 7 Inches, Width: 3.25 Inches, Number Of Teeth: 12 Teeth, Teeth Height: 2.5 Inches 10 Pcs. Comb, All Purpose, Plastic, 18 Cm Long , Has Both Fine And Medium Teeth Position On One Side Only, Height Of The Teeth: 2 Cm 10 Pcs. Comb, Haircutting, Hard Plastic, Length Including The Handle:180mm, Width: 30mm With Detachable Steel Blades And Blade Holder 10 Pcs. Comb, Large Toothed, Plastic, Size:15 Cm, Number Of Teeth: 10 Teeth, Gap Between Comb's Teeth: 0.4 To 0.5 Cm , Teeth Size: 0.3 Cm X 4cm 10 Pcs. Comb, Tail, Plastic, Size : 8 Inches X 1 Inches, Tail Length: 4 Inches Tooth Length: 3/4 Inch 10 Pcs. Comb, Teasing, Plastic,1st Row: Large Teeth 25 Mm Long, 2nd Row: Small Teeth 19 Mm, Over-all Size: 20cm X 3.8 Cm 5 Pcs. Comb, Wide Tooth, Plastic, Size:15 Cm, Number Of Teeth:10 Teeth, Gap Between Comb's Teeth:0.4 To 0.5 Cm, Teeth Size: 0.3cm X 4cm 8 Pcs. Crimpers, 25 Watts, Size:38 Cm X 15.5 Cm X 9 Cm, Maximum Temp.: 200 Degrees Centigrade, Rated Voltage:10 -230volts Ac 5 Pcs. Curling Iron, Ceramic, 65watts, 210-240volts Ac, Barrel Size: 1 Inch, Adjustable Heat Setting Of 200 Degrees Centigrade, Swivel Cord Up To 360 Degree 5 Pcs. Drip Pan, Hard Plastic, Size:17.5 X 25.8 X 1 Inches, Thickness: 1/8 Inch, Shallow Rectangular Type 5 Pcs. Dryer, Hair, 1000w, Rated Voltage: 220vac, 18.5cm X 16cm X 6.5cm With Plastic Handle Design 10 Box Gloves, Disposable, Size: 25cm X 23cm, 100 Pcs Per Box 5 Pouch Gloves, Rubber, Medium, Thickness: 4 Mil, Acid Resistant 5 Pouch Gown, Smock, Polyester, Sizes: Small (50inches X 56inches);medium (52inches X 58inches); Large (54 Inches X 60inches) 10 Pouch Hairclips, Metal, Size:67mm X 19mm 10 Pack Hairnet, Invisible, Nylon, Size: 55mm, Stretchable, Color: Black 10 Pc Headband, 6 Inches, Woven Crochet Tube 10 Pc Headband, Flannel, Cloth, Size : 45 Cm, Width: 8 Cm 6 Pc Infrared Iron, Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body, Power: 70 Watts, Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm, Heating Plate 50 Mm, Heating Time: Within 30 Seconds;variable Heat Settings: From 250 To 450 Degrees Fahrenheit 10 Pc Mirror, Hand, Plastic, Size 15 Cm Diameter, Frame Thickness: 6.5mm, Over-all Length With The Handle: 20 Cm 3 Pc Mirror, Modular, Plain Mirror, Mirror Material: Glass, Frame Material: Aluminum (cut To Fit), Dimensions: 75 Cm X 65 Cm, Mirror Thickness: 6mm 10 Pc Prong Clip, Double, Steel, Size: 45 Mm 10 Pc Prong Clip, Single,steel, Size: 55 Mm 10 Pc Razor, Straight, High Carbon Steel, Foldable Straight Razor, Replaceable Blade; Dimensions: 14 Cm X 2 Cm When Folded; Double-edged Razor Blades 3 Dz Roller Pins, Metal, Size: 60mm Long, Quantity By Dozen(12 Pieces) 10 Pc Rollers, Jumbo, Plastic 44mm In Diameter X 64mm 10 Pc Rollers, Large Sized, Plastic, Size: 40mm Diameter X 60mm Long 10 Pc Rollers, Medium Sized, Plastic; Diameter: 38 Mm ,length: 58mm 4 Pc Scissor, Cutting, Stainless Steel,length: 17cm,blade Width 10 Cm 4 Pc Scissor, Thinning, High Carbon Steel, Blade Length 6cm, Style: Right Handed Scissor, Length: 17cm 5 Pc Scoop, Plastic, Capacity:1/2 Cup, Rounded Edges With Handle Thickness: 1.5 Mm 5 Pc Shower Cap, Plastic, Size: One Size Fits All Or 30cm 5 Pc Spatula, Plastic, Dimension: 7.5 Cm X 1.5 Cm 5 Pc Spray Gun, Transparent Plastic, Capacity: 300ml, Dimension: Bottom Is 7 Cm And The Height Is 17cm 3 Pc Steamer, Hair, 450 Watts, 220 Volts/50-60hz, Hood Material: Polycarbonate, Hood 30 Cm Diameter Opening X 25 Cm, Timer Setting Is Up To 60 Minutes, 32 Ounce Water Reservoir, Adjustable Height 100- 150cm 30 Pcs. Stool, Metal, Electroplated, Load Capacity: 150kg, Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely Lot 3. Sta. Maria National High School (wellness Massage Nc Ii)-php 198,338.00 5 Pcs. Dummy, Anatomical, Plastic, 32" Tall, 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks, Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach, Base Is 13" X 9" (removable), Weighs 12 Lbs. 5 Pcs. Massage Bed/table, Hard Wood With Steel Bracings, Hardwood Frame, Marine, Plywood Deck; Color: Black, Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in., Leg Thickness - 35mm, Cushion System: High Density Foam (7.5 Cm / 2.95") With Pu Leather Cover (1mm Thick), Weight Capacity: 250 Kg(minimum), Gross Weight: 21 Kg 2 Pcs. Massage Chair, Padded With 3" Thick, High-density, Small-cell Foam, Size: 14"-diameter Seat But Without Back And Arm Rest, With Metal Post And Hard Plastic Star, Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever, Five Heavy-duty, Smooth-rolling Wheels, Load Capacity: 265 Lbs / 120 Kg (maximum), Smooth Surface And No Sharp Edges 6 Pcs. Sphygmomanometer, 33 To 42 Cm Arm Diameters, Accuracy: ±3mm Hg;measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings, Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure 6 Pcs. Stethoscope, Stainless Steel Double Chest Piece, Color: Black, Tubing Description: Y-tube Pvc, Uses Extra Soft Replaceable And Pivotable Ear Tips, The Binaural Is Chromium-plated, Chest-piece Diameter: 44 Mm And Non-chill Rim, Overall Length: 29" /74 Cm 6 Pcs. Talking Sphygmomanometer, Nylon Cuff Sizes: 33 To 42 Cm Arm Dia, Dimensions: 98mm*126mm*60mm, Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg, Weight: 450g , Range: 20~280mmhg(0.4kpa-37.3kpa), Pressure Accuracy: ±3mmhg(±0.4kpa), Pulse Measurement Range: 40 ~199 Beats /min, Voltage: 4*aaa Alkaline Batteries 25 Pcs. Talking Thermometer, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f), Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches / 51 (w) X 110 (h) X 30 (d) Mms 26 Pcs. Thermometer, Digital, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery , Power Consumption: 0.1mw, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) 10 Pcs. White Board, White Formica Laminated, Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm Wih Plastic Corner Caps, The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube , Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels, Height From Floor: 210 To 214cm Lot 4. Sumirap National High School And Tangub City National High School (bpp Nc Ii)-php 519,702.00 10 Set Air Compressor With Airbrush Cake Decorating Set(airbrush Gravity Feed Dual Action Airbrush Compressor Kit 0.2/0.3/0.5mm Needle Air Brush For Cake Decorating Painting. Material: Aluminum + Copper Type: Single Cylinder Piston Compressor Power: 1/5 Hp Plug Type: Eu Voltage: 220-240v/50hz Speed: 1450 Rpm Air Volume Per Minute/liter: 23l/min Maximum Pressure: 7bar (100psi) Working Pressure Of Spray Gun: 15-50psi Low Noise: ≤50db Accessories: Pressure Gauge, Pressure Gauge, Air Filter Automatic Stop, Starts At 2.8 Bar, Stops At 4 Bar (special Pressures Available) Connection: With Connection G 1/8" Bsp Cable: Approx. 1.8m / 6ft) 40 Pc Egg Beater(stainless Steel Semi-automatic Mixer/manual Whisk Egg Beater Kitchen Cooking Tool) 40 Set Board, Chopping ,6 Color( Type: Food Grade Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Comes With No Sharp Edges And With Hole For Storage Purposes) 10 Pc Double Boiler (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Rivetedhandle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) 80 Set Bowl, Mixing Set Stainless (premium Stainless Steel Mixing Bowls Bowl Sizes Are: 5 Qt, 4 Qt, 3qt, 1.5qt, And ¾ Qt And They Each Fit Perfectly Within One Another) 70 Set Cake Pan, Round, Size: 4''x3'' (non-stick Aluminum Alloy Cake Round Pan) 30 Set Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set ) 60 Pc Cake Turn Table (type: Turn Table Body Shape : Circular Material: Cast Aluminum Plate.and Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise ) 30 Pc Coupler (type: Foood Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe ) 50 Set Cup, Measuring (stainless Steel Measuring Cup Set For Dry Ingredients. Composed Of 1 Cup, 3/4 Cup, 1/2 Cup, 1/4 Cup, 1/8 Cup) 50 Set Cup, Measuring 250 Ml. For Liquid Glass (250 Ml Heat Resisting Measuring Glass) 40 Set Cup, Measuring 500 Ml. For Liquid Glass (500ml Heat Resisting Measuring Glass) 40 Pc Cutter, Dough (type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Lenght : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) 40 Pc Cutter, Pie (stainless Steel Rolling Knife/pizza Cutter) 30 Pc Flour Sifter,hand Cranked (type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm ( Minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe) 40 Pc Grater (type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe) 50 Pc Knife, Kitchen (premium Quality Stainless Steel Kitchen Knife, 6-8” In Length) 20 Pc Knife, Pallete (premium Quality Stainless Steel Pallete Knife Ideal For Butter.) 50 Pc Ladle, 3oz (premium Quality Stainless Steel Soup Ladle, 3oz) 40 Pc Loaf Pan, Big (carbon Steel Non-stick Loaf Pan, Size: L=32,w=13,h=7cm Minimum) 40 Pc Loaf Pan, Medium (carbon Steel Non-stick Loaf Pan, Size: L=28, W=15.5, H=7cm Minimum) 40 Pc Loaf Pan, Small (carbon Steel Non-stick Loaf Pan, Size: L=25.5, W=13.5, H=6cm Minimum) 40 Pc Muffin Pan, Big (carbon Steel Non-stick Muffin Pan, 12 Holes,3oz) 40 Pc Muffin Pan, Medium (carbon Steel Non-stick Muffin Pan, 9 Holes,3oz) 40 Pc Muffin Pan, Small (carbon Steel Non-stick Cupcake Pan, 6 Holes) 70 Pc Pie Pan, 10'' (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 10” In Diameter) 70 Pc Pie Pan, # 8 (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 8” In Diameter) 50 Set Pillars, Cake (premium Quality Acrylic Cake Support Pillar, 12cm In Diameter(minimum),straw Size Diameter ) 60 Pack Piping Bag (reusable Silicone Piping Bag, Biggest Size, 100pcs Per Pack) 40 Pc Rectangular Pan (carbon Steel Non-stick Rectangular Cake Pan. Size: L=10.8", W=7", H=1.5", Minimum) 70 Pc Rolling Pin, Plastic (non-stick Rolling Pin Made With Food Grade Nylon, Size:13") 100 Pc Rubber Scraper, Silicone (size: 21cm X 4.1cm, Material: Silicone) 40 Pc Sauce Pan Non Stick (non-stick Sauce Pan With Lid, Size: 20cm) 40 Pc Sheet Pan / Cookie Sheet (aluminum Baking Sheet, Size: 13x18”) 50 Set Spoon, Measuring (premium Quality Stainless Steel Measuring Spoon Set, Compost Of 1/8tsp, 1/4tsp, 1/2tsp, 1tsp, 1/4tbsp, 1/2tbsp, 1tbsp)) 70 Pc Spoon,wooden (premium Quality And Durable Long Handled Wooden Spoon/ladle. Length: 30.5cm Minimum) 40 Pc Strainer (stainless Steel, Fine Mesh Strainer, Size: 18cm) 40 Set Tip, Decorating, Large (type: Tube Tips Body Shape: Nozzles With Different Shape Material: Stainless Steel Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Roping,stars, Leaves And Other Designs Comes With 24 Different Shapes Of Nozzles Packed In Plastic Storage Box Smooth And Deformities Free Must Be Branded) 30 Pc Weighing Scale, 10 Kg. (kitchen Weighing Scale, 10kg Maximum) 40 Pc Weighing Scale, 5 Kg. Digital(digital Kitchen Weighing Scale, Digital Price Computing Weight Electronic Scale, Capacity Is At Least 5kilograms, Pan Size 34.5 X 23.5cm) 70 Pc Wire Whisk, Medium (stainless Steel Wire Whisk, Size: 14”) Lot 5. Sumirap National High School And Tangub City National High School ( Cookery Nc Ii )-php 1,405,964.00 30 Pcs. Apple Corer, Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe. 4 Pcs. Bain Marie, Table, (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Soiuce: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 20 Pcs. Blender, Electric Heavy Duty, Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 40 Pc Board, Chopping/ Cutting, Plastic, Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe. 20 Pcs. Boiler, Double, Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 30 Pcs. Braising Pan, Medium, Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 30 Pcs. Can Opener, Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs. 30 Pcs. Casserole,medium Pot, Body Shape:round Material:stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case . 30 Pcs. Casserole,small Pot, Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm. 20 Pcs. Colander, Medium, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm Body Thickness: 0.8 Mm (minimum) 20 Pcs. Colander, Small, Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 20 Set Cup,measuring( For Solid) Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 20 Pcs. Dispenser,paper Towel Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 12 Pcs. Fan, Electric, Ceiling Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 6 Pcs. Fire Extinguisher With Contents .for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 20 Pcs. Fish Poacher,medium, Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Includes Stainless Steel Lid With Handle And Removable Insert 20 Pcs. Fork, Carving Body Shape: Square Shape Prong Prong Material:high Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastictriple-riveted Handle Preferably With Packing Case 400 Pcs. Fork, Kitchen Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 36 Dozen Frying Pan, Large, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) 40 Pcs. Frying Pan, Medium, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 30 Pcs. Frying Pan Small, Non Stick , Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 Pcs. Funnel, S/s, Medium, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 22 Pcs. Funnel, S/s, Small, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Garbage Bin, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Glass Rack, Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 20 Pc Ice Cream Scoop, Stainless Steel Ice Cream Scoop 45mm. Simply Squeeze Handle. 30 Pc Knife,boning, Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 30 Pc Knife,chef, Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 30 Pc Knife,cleaver, Cutting Edge: Straight, Pointed End Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets Blade Thickness: 3 Mm (minimum) 30 Pc Knife,oyster, Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 4 Pc Light,emergency, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 4 Pc Meat Slicer, Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 30 Set Pastry Tube, Stainless Steel Pastry Tube 24, Big 40 Pc Peeler, Y -type, Rack Dimension: Length: 38 Cm X Width 23 Cm (minimum) Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger Preferably With A Packing Case 14 Set Pepper And Salt Mill Food Grade And Non-toxic Material. Mill Cookery Nc Ii Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism 20 Pack Piping Bag, Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 10 Pc Plate Rack Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 12 Set Preparation Table With Sink, Heavy Duty Wire Shelving, 2.6 Mm Diameter (minimum) Table With Sink Cookery Nc Ii Type: Preparation Table With Sink & Sheleves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 4 Pc Pressure Cooker, Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 24 Pc Roasting Pan , Body Shape:rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 40 Pc Scissor, Kitchen Type:kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 30 Pc Siever,small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 30 Pc Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 30 Pcs. Skimmer,spider, Dishwashing Safe Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe. 24 Pcs. Soup Cup, Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 20 Pc Soup Ladle, 12oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle, 3 Oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 Pc Soup Ladle 6 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle 8 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 62 Pc Spatula, Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 400 Pc Spoon, Kitchen Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 60 Pc Spoon, Kitchen (slotted) Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) 30 Set Spoon, Measuring Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 40 Pcs. Spoon, Parisienne Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 40 Pc Spoon, Serving Preferably With A Packing Case Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 30 Pc Spoon,wooden Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 20 Pc Stock Pot,large . Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) 30 Pc Strainer, Chinois,small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer,chinois,medium Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 26 Pc Strainer,medium,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer, Small,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) 30 Pc Tenderizer, Medium Aluminum Meat Tenderizer 16 Pc Thermometer,pocket/pin Pocket/pin Food Thermometer 20 Pc Tong,12'' Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 20 Pc Tong 8'' Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pc Tray,baking,small, Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) 36 Pc Tray,utility,medium,plastic White Plastic, White Multi Purpose 13”x10”utility Tray 30 Pc Turner,3'x6'', Slotted Turner, 3" X 6" Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 4 Pc Utility Cart, Stainless Steel 3 Tier Trolley Cart 75x40x85. 20 Pc Weighing Scale 1 Kg. Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 20 Set Weighing Scale 5kg. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 40 Set Wire Skimmer Small, Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 40 Pc Wire Whisk Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk, Medium, Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk,small, Type: Wire Whisk, Small Body Shape: Baloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 18 Pc Wok,medium Type: Wok, Medium Body Shape:round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 18 Pc Wok,small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 12 Pc Working Table, Stainless, 4 Seaters Stainless Working Table , Two Layer (120x60x80) 30 Pc Zester, Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Lot 6. Sumirap National High School (housekeeping Nc Ii)-php 326,452.00 1 Pc Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Day Time. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting) 25 Pc Apron, Polyester-cotton (bib Apron, Sleeveless Adjustable Neck Loop Material : Polyester - Cotton Fabric Dimension : 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads) 5 Pc Baskets, Laundry (3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 1 Set Bed, Queen (bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 1 Set Bed, Single (bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 10 Pc Board, Ironing (type: Foldable Type Ironing Board Body Shape : Standard Material : 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum ) Body Size :120 Cm X 30 Cm X 5 Cm Color : Any Comes With Box No Sharp Edges) 25 Pair Boots, Safety, Plastic (upper Material: Elastic Pvc Sizes: 7 Inches - 5pcs 8 Inches - 5pcs 9 Inches - 5pcs 10 Inches -5pcs 11 Inches - 5pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size) 15 Pc Brushes, For Housekeeping (brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- 1cm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges) 10 Pc Buckets, Water (water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges) 10 Pc Caddy, Toilet (carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges) 1 Unit Carpet Sweeper (carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting.) 1 Unit Cart, For Housekeeping Nc Ii (housekeeping Cart Trolley, Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels. Cart Frame: Steel, Powder Coated. Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings. Overall Dimensions : Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges) 50 Pc Cleaning Cloth, Linth-free (lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch) 1 Unit Coffee Maker (coffee Maker, Electric Material: Metal, Plastic, Glass. Capacity: 6 Cups (minimum). Detachable Tank, With Water Level Indicator. Non-stick Warming Plate : Removable And Washable Filter Non-drip Valve : Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz , 500w Minimum Comes With A Heat Resistant Glass Pitcher. With A 1 Meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option). Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines) 5 Pc Dust Pan (dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges) 5 Pc Duster, Anti-static (anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges) 7 Unit Fan, Electric ( Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service) 3 Pc Fire Extinguisher(with Contents) (1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality) 10 Pc Flashlight (flashlight Led 1,000 Lumens (minimum), Color : White , Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges Dimensions : 5 Inches X 1 Inch Diameter (minimum) Operating Duration Of Battery When Fully Charged : At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 10 Pc Flat Iron (clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines.) 10 Pc Foam, Scrubbing (1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality) 4 Pc Garbage Receptacles (1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality) 30 Pair Gloves, Rubber (1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.color : Any Color 4.size : Medium 5.other Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality) 15 Pc Goggles, Safety (safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges) 1 Pc Hairdryer( Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 2 Roll Hose, Water(water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color; Hose Length: 50 Feet; Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges) 3 Pc Kettle, Electric(electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material : Round Stainless Body, Plastic Handle, Lid And Base Capacity : 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains: Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 5 Pc Laundry Sorter(3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 2 Pc Light, Emergency(emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 2 Pc Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges) 20 Pc Mop (mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 1 Set Polisher, Floor, Electric, With Accessories(electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 5 Pc Shelving(shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges) 5 Pc Sign, Caution(caution Sign, A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges) 10 Pc Sponges, Dish(dish Sponge, Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded) 10 Pc Spray Gun, Water(barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded) 10 Pc Squeegee(squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges ) 5 Pc Squeezer, Mop(mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges) 1 Pc Step Ladder(material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Brandedfeet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum)) 2 Pc Vacuum Cleaner, Dry And Wet(electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 1 Unit Washer, Laundry(1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 2 Pc White Board(white Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges) Lot 7. Tangub City National High School (food And Beverage Services Nc Ii) Php 571,245.00 50 Pcs Chair, Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 4 Pcs Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 6 Pcs Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color : White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 24 Set Cups Ans Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 10 Pcs Folder, Menu Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 50 Pcs Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 50 Pcs Fork, Dessert Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished,with Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mmwidth : 20 - 30 Mmhandle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 60 Pcs Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Fish Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mmhandle Thickness : 2 Mm - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 24 Pcs Glass, Champagne Flute Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Collins Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Juice/hi-ball 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Diswasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 36 Pcs Glass ,pilsner(ice Tea Glass) Type:falired Rim,body Shape:round Slender Bowl,material:clear Glass Capacity:20 0z To 23 Oz With Flaired Rimand Slender Shape Packed In Carton Box.the Item Must Have Good Quality. 36 Pcs Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 40 Pcs Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 4 Pcs Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 4 Pcs Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 24 Pcs Knife, Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 24 Pcs Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mmhandle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 24 Pcs Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 20 Pcs Napkin Holder (stainless) Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 12 Pc Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 50 Pc Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Plate, Dessert, 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 60 Pc Plate, Dinner, 10" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Plate, Fish, 8" To 9" Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 10 Pcs Round Table (8's) Type: Foldable Body Shape: Round Material: High Density Polyethylene Table Top Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 50 Pcs Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 50 Pcs Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 50 Pcs Salad Plates 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 20 Pcs Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 25 Pcs Sauce Laddles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 50 Pcs Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 25 Pcs Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 25 Set Show/service/base Plates 11" To 14" Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 50 Pcs Side Plates Or Bread Plates 6'' Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 25 Pcs Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 25 Pc Soup Laddle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 15 Pc Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dinner Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Soup (cream And Cosume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver Packed In Plastic Pouch 50 Pc Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 25 Pc Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 Pc Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 100 Pc Table Napkins, Cloth, 16"x16" Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 80 Pcs Table Skirting Cloth 90" To 90" Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Table, Square/rectangular (4's Or 6's) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 20 Pcs Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 50 Pcs Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 15 Pcs Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pcs Tooth Pick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 30 Pcs Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 20 Pcs Tray, Round (bar) Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 30 Pcs Water Pitcher (stainless) Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 8. Tangub City National High School (front Office Services And Local Guiding Services) Php 232,832.00 50 Pcs Calculator Type: Simple Calculator, Non Scientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment, 1 Pcs Cart, Bell Boy Type:hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 1 Pcs Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels, 1 Pcs Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body:plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures 30 Pc Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 1 Pcs Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, 3 Pcs Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 1 Pc Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant; 1 Pc Key Card Maker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 1 Pcs Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type:wall Mounted Rack Pack With Shipping Carton Box 1 Pc Safety Deposit Box Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures On How To Use The Equipment, Branded 20 Pcs Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Powerconsumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma 25 Sets First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1pc; Sterize Gauge Swab(4 X4 X12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band -aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5cm X 5cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90cm X 90cmx 120cm, 2pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms , 2pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2- 3years Expiration, 1 Tube; Medical Tweezers Min. 8cm, Plastic, 2pcs; Plastic Bags, Resealable, Minimum Of 24pcs, 100mm X 180mm, 24pcs, 150mm X 230mm Cotton Balls , 50 Balls In A Sealed Package, 2 Packs Hot And Cold Pack, Reuseable, 1 Pack Water Resistant And Sturdy Case W/ Handle That Can Accommodate All The Listed Items. 4 Pcs Megaphone Battery Operated (4 Pcs - Size D Battery) With Built-in Siren Power Output: 20-watts (minimum) Range: 700 Meters (minimum) With Hand Grip And Carrying Strap Branded With Users Manual That Contains The Specification, List Of Parts, Instruction Guide, Troubleshooting, Safety Instruction. 100 Pcs Whistle Anodized Aluminum;size : Length - 6.5cm X 3cm Diameter; Handy And Lightweight; Loud Whistle Can Be Heard For Far Distance Of 100 Meters; With Key Ring For Attachment 2 Pcs White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform.board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Capscomes With Metal Tray For Marker And Eraserthe Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobblewith 4 Lockable Hard Plastic Caster Wheelsoverall Height From Floor: 210 To 214cmsmooth Surface, No Sharp Edges Total Abc 3,978,106.00 2. The Department Of Education – Division Of Tangub City Now Invites Bids For The Above Procurement Project. Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Department Of Education – Division Of Tangub City And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. , Mondays To Fridays Except Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot 1 - Five Hundred Pesos (p500.00) Lot 2 - Five Hundred Pesos (p500.00) Lot 3 - Five Hundred Pesos (p500.00) Lot 4 – One Thousand Pesos (p1,000.00) Lot 5 - Five Thousand Pesos (p5,000.00) Lot 6 - Five Hundred Pesos (p500.00) Lot 7 – One Thousand Pesos (p1,000.00) Lot 8 - Five Hundred Pesos (p500.00) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Education – Division Of Tangub City Will Hold A Pre-bid Conference On November 21, 2024, 9:00 Am At Division Office Conference Hall Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 9:00 A.m. On December 3, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be December 3, 2024, 9:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Bidders Or Its Authorized Representatives Are Encouraged To Attend The Pre-bid Conference To Ensure That They Fully Understand The Procuring Entity’s Requirements. 11. The Department Of Education – Division Of Tangub City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Gina L. Mandawe Head, Bac Secretariat Deped, Division Of Tangub City, Anecito Siete St., Mantic, Tangub City 7214 (088) 530-5988 Depedtangub.bacsec@deped.gov.ph Https://tangub.deped.gov.ph/ 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://tangub.deped.gov.ph/ Erlinda G. Dael, Phd., Cese Assistant Schools Division Superintendent Bac Chair

Details: Description Project Reference No. 2024-11-25 Goods Invitation To Bid For The Supply, Delivery, Installation And Commissioning Of Various Laboratory Equipment 1. The Forest Products Research And Development Institute (fprdi) Through The Cy 2024 General Appropriations Act (gaa) Intends To Apply The Sum Of Three Million Six Hundred Fifty Thousand Pesos Only (php 11,700,000.00) Being The Approved Budget For The Contract (abc) (inclusive Of Vat) To Payments Under The Contract For Supply, Delivery, Installation And Commissioning Of Various Laboratory Equipment. Item No. Particular/description Unit Qty Unit Cost (php) Total Cost (php) 1 2 3 Wine Analyzer Ft-ir Spectrometer System With Library And Wine Calibration Specifications: - Analyzer Ft-ir Spectrometer System For Wine-, Must- And Juice Analysis. - Ft-ir Spectrometer With Temperature Controlled Diamond Atr Module - Includes Kbr Beam Splitter And Kbr Windows To Cover The Full Mir Range From 8,000 – 350 Cm-1 - Spectral Resolution: Better Than 2cm-1; - Interferometer: Gold Mirrors, High Throughput, Permanent Alignment, Long Life Time >10 Years - Diode Laser, High Wavenumber Accuracy And Precison, Long Life Time >10 Years- - Ir-source: Long Life-time > 5 Years. - Detector: Dtgs, Temperature-controlled, High Stability Against External Temperature Changes - Sealed And Desiccated Optics - Internal Validation Unit (ivu) With Reference Standards For Automated Instrument Tests Of Every Setup And Every Measurement Mode - Automated Instrument Tests For Operational And Performance Qualification (oq; Pq) - Automatic Performance Test And Load Of Appropriate Measurement Parameters When Changing The Configuration - Performance Guard: Continuous Monitoring Of All Spectrometer Components, Performance And Humidity Platinum - Atr - Platinum-atr Quicksnap Sampling Module With Diamond Atr-crystal, Single Reflection, Monolithic, Edged In Tungsten Carbide, Long Life Time > 10 Years - Work Disk: Trough-like Stainless Steel Plate - Temperature: Room Temperature Up To 120°c - An Adaptor For Flow-through Measurements Of Fluids With The Atr Diamond Crystal Plate Should Be Available. Using This Adaptor The Samples Might Be Injected By A Syringe Or Applied By A Pump System - The Ftir Spectrometer Should Be Produced By A Company Which Is Certified According To Iso 9001-2008. Performance Control & Validation - Remote Operation And Diagnostics Of The Ft-ir Spectrometer Must Be Possible. - The Ftir Spectrometer Should Be Equipped With Fully Automated Instrument Performance Tests (oq, Pq). These Automated Test Series Should Determine If The Spectrometer Is Operating Within Specification - The Ftir Spectrometer Should Be Equipped With An Integrated Certified Reference Standard And Fully Automated Instrument Performance Tests Fulfilling Pheur 2.2.24, Phjp 2.25 And Usp <854>. - Extensive User Management With Multiple User Levels, Non- Editable Data Files And Complete Audit Trails Should Be Provided By This Software. It Further Should Support The Demands Of The 21 Cfr Part 11 Regulation (electronic Records, Electronic Signatures) Issued By The American Fda. Calibration For Wine Analysis - Spectra Of More Than 1500 Wines From Major Wine-producing Regions In The World - Starter Calibrations For The Analysis Of Finished Wines; Simultaneous Analysis Of Several Parameters Such As Alcohol, Density, Different Sugars, Ph, Saccahrose, Total Acid, Total Sugar, Different Acids - Calibration Spectra And Reference Values Were Collected By The Accredited (dakks) Institute Heidger - Standard Wine For Analysis Check - Atr-ftir-library Complete - Atr Polymer Spectra Library, 234 Spectra (of 117 Polymers) Recorded With Diamond- And Germanium-atr Technique Includes 26,000 Atr Spectra From Polymers, Monomers, Additives, Plasticizer, Fillers, Building Materials, Cosmetics, Excipients, Organic And Inorganic Chemicals, Biochemicals, Fibres, Proteins, Fatty Acids, Lipids, Ingredients, Natural Products, Silicon Containing Compounds, Solvents, Pesticides, Pollutants, Semiconductors, Dyes, Paints, Coatings, Food, Food Additives, Minerals, Lubricants, Surfactants, Kidney Stones, Pharmaceuticals And Drugs. Spectroscopic Software - Integrated Software For The Acquisition, Processing, Evaluation And Reporting Of Ir-spectroscopic Data In Laboratory And Process Environments And Is Compliant With Cgmp/glp/gamp Regulations Such As 21 Cfr Part 11 And The Fda Data Integrity Guideline. The Spectrometer Software Should Be Equipped With All Necessary Routines To Assist Laboratories That Must Confirm Gmp Standards. Extensive User Management With Multiple User Levels, Non- Editable Data Files And Complete Audit Trails Should Be Provided By This Software. It Further Should Support The Demands Of The 21 Cfr Part 11 Regulation (electronic Records, Electronic Signatures) Issued By The American Fda. Validated Ir Software, Prepared To Work Fully Compliant To Glp And Gmp Regulations- Software-wizard For Ir-spectroscopic Quality Control. Guides The Operator Through The Complete Analysis Procedure From Measurement, Via Spectrum Evaluation To The Final Generation Of The Report Quantification Of Substances Using The Pls Algorithm. The Quantification Software Package Must Have Self-optimizing Calibration Models. Can Perform Advanced Evaluation Functions Like Multivariate Quantification (partial Least Squares, Pls), Factorization (principle Component Analysis, Pca), Curve Fit And Interactive Peak Picking Software Package For Comprehensive Search Functionality In Spectra Libraries: Mixture Analysis; Peak Search; Information Search; Unlimited Set-up And Editing Of User Spectra Libraries; Structure Search; Library Browser; Library Validation Dedicated Software For Wine Analysis Extension Of The Base Spectrometer For Operation In Regions With High Humidity. Provision Of Znse For Beam Splitter And Entrance And Exit Windows.usable Spectral Range To 6,000-500cm-1 Warranty Extension To 10 Years For Interferometer Covers Material Costs On The Replacement Of Defective Parts Of The Scanning Mechanism Of The Interferometer. Warranty Extension To 10 Years For Laser - Covers Material Cost In Case Of Laser Defects. Warranty Extension To 5 Years For Mir Source - Covers Material Costs In Case Of Source Defects. Warranty Extension To 10 Years For Platinum Atr, Or With Diamond Atr-crystal. Desktop, 1 Kva Ups With Avr Complete Pc System (desktop) O Os: Microsoft Windows 10 O Hdd: 1 Tb O Monitor: 24 Inches, Led Color O Processor: I5, 14th Gen O Ram: 32 G O Continuous Ink Printer - On Site-training, Installation, And Commissioning - Preventive Maintenance For Two (2) Years - Other Terms: Supplier Must Have At Least 1 Factory Trained Engineers With Training Certificate (for Installation, Services And Maintenance Of Equipment) Certificate Of Distributorship From The Principal Supplier Delivery Period: 75 Calendar Days Upon Receipt Of Po Multifunctional Autosampler System (spme+hs) With Flavors And Fragrances And Smart Aroma/off-flavor Database Library Specifications: • Spme O Number Of Samples: 45, 20ml Vials O Fine Bar Conditioning Temperature: Up To 350c O Agitator: Six Heated Vials, Heating Range Up To 200c • Headspace O Number Of Samples: 45, 20ml Vials O Headspace Injection Volume: 250ul To 2500ul O Syringe Heating: 150c • Must Be Compatible With Existing Gcmsms System • Must Have A Software To Connect With Existing Gcmsms System • Includes 4 Sets Of 20 Ml Vials (100pcs/pck) • Includes 2 Helium Gas Tanks Libraries/database: Flavors And Fragrances Library • Must Be Compatible With Existing Gcmsms System • Registered With 4030 Natural And Synthetic Chemical Compounds Relating To Flavors Smart Aroma Database • Must Be Compatible With Existing Gcmsms System • Include More Than 500 Aroma Compounds Supports The Aroma Analysis Of A Wide Range Of Samples Other Terms: • Warranty: 1 Year On Parts And Services With Free One (1) Preventive Maintenance Within The Warranty Period • Supplier Must Have At Least 2 Factory Trained Engineers And 2 Application Chemists With Training (operations And Maintenance/service Of Equipment) Certificate Working With The Same Brand For At Least 10 Years • On Site Training By Trained Application Chemist • Certificate Of Distributorship From The Principal Supplier For At Least 15 Years • Includes Installation And Commissioning • Delivery Date: 60 Calendar Days Upon Receipt Of Po Uv Vis Spectrophotometer Double Monochromator With Color Calculation Software And Multicell Compartment Specifications: • Wavelength Range Must Be 185 To 900nm" • Spectral Bandwidth Should Be 0.1, 0.2, 0.5, 1, 2, 5 Nm, L2 And L5 (low Stray Light Mode)" • Wavelength Setting Should Be In 0.01 Nm" • Wavelength Accuracy Should Be ±0.1 Nm 656.1 Nm D2, ± 0.3 Nm, All Range Or Better" • Wavelength Repeatability Should Be ± 0.05 Nm Or Better Wavelength Transfer: Approx.14,000 Nm/min Wavelength Scan Rate: Approx.4,000 To 0.5 Nm/min Lamp Interchange Wavelength: Auto Switching Synchronized With Wavelength; Switching Range Selectable Between 290 And 370 Nm (0.1 Nm Increments) • Stray Light Should Be 0.00005% Or Less (220 Nm, Nai), 0.00002% Or Less (340 Nm, 370 Nm, Nano2) And 1% Or Less (198 Nm, Kcl) Photometric System: Double Beam Optics • Photometric Range Should Be -8.5 To 8.5 Abs Or Better • Photometric Accuracy Should Be ± 0.002 Abs (0.5 Abs), ± 0.003 Abs (1.0 Abs), ± 0.006 Abs (2.0 Abs) And ± 0.3% T Or Better" • Photometric Repeatability Should Be ± 0.001 Abs Or Less (0.5 Abs), ± 0.001 Abs Or Less (1 Abs), ± 0.003 Abs Or Less (2 Abs) And ± 0.1% T Or Better • Baseline Stability Should Be 0.0003 Abs/h Or Less • Baseline Flatness Should Be Within ±0.0004 Abs (200 To 860 Nm) • Noise Level Should Be 0.00005 Abs Or Less • Light Source Should Be Halogen Lamp, Deuterium Lamp (includes Automatic Optical Axis Adjustment Mechanism) • Light Source Switching: Automatic Switching Synchronized With Wavelength With Switching Range Selectable Between 290 And 370 Nm • Monochromator Should Be Czerny-turner Mounting, Double Monochromator; • Photometric System Must Be A Double Beam Optics • Detector Should Be A Photomultiplier Software: Color Measurement Software That Can Be Used To Calculate The Color Value Of Measured Substances Based On Measured Spectra. Can Also Display Color Diagrams, Such As By Plotting Color Coordinates In An Xyz Color System Or Plotting Cielab Lightness Index Or Color Coordinate Values • Measurement Mode Should Be Spectrum, Quantitation, Photometric And Time Course • Can Retain History Of Changes To Data Files And Parameter Files • Can Specify All Sample Information Settings Before Measurement • Can Control Automatically From External Application • Can Automatically Analyze Data After Measurements • Can Automatically Print Report After Measurements • Can Detect Peaks, Extract Photometric Value Of Specified Wavelength And Calculate Area • Can Do Dilution Factor Correction And Optical Path Length Correction • Can Do Single-point Calibration Curve, Multi-point Calibration Curve And K-factor Method • Software Compatible With The Unit Operational Accessories: Multi-cell Sample Compartment Unit – Can Hold Up To Six 10mm Square Cells • Complete Pc System (desktop)  Os: Microsoft Windows 11  Hdd: 1 Tb  Monitor: 24 Inches, Led Color  Processor: I5, 14th Gen  Ram: 32 Gb • Continuous Ink Printer • 6 Pcs. 10mm Quartz Cuvette • 1 Kva Ups Other Terms: Warranty: 1 Year On Parts And Services With Free One (1) Preventive Maintenance Within The Warranty Period • Supplier Must Have At Least 2 Factory Trained Engineers And 2 Application Chemists With Training Certificate (operations And Maintenance/service Of Equipment) Working With The Same Brand For At Least 10 Years • On Site Training By Trained Application Chemist • At Least 10 Installations Of Uv-vis In The Country • Certificate Of Distributorship From The Principal Supplier For At Least 15 Years • Includes Installation And Commissioning • Delivery Date: 60 Calendar Days Upon Receipt Of Po ------- Nothing Follows ----------- Lot Lot 1 1 1 3,900,000.00 5,700,000.00 2,100,000.00 ,000.00 3,900,000.00 5,700,000.00 2,100,000.00 Total 11,700,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Fprdi Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Are Required Within Seventy-five (75) Calendar Days For Item 1, And Sixty (60) Calendar Days For Items 2 & 3, From Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least 60% Interest Or Outstanding Capital Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From The Fprdi-bids And Awards Committee (bac) Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13, 2024 (wednesday) From The Given Address And Website Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Twenty-five Thousand Pesos (php 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees, Such As A Copy Of The Official Receipt Issued By The Fprdi Cashier Or Bank Deposit Slip Which May Be Presented In Person, By Facsimile Or Through Electronic Mail. Note: Bank Deposit Transaction Is Encouraged. 6. The Fprdi Will Hold A Pre-bid Conference On November 20, 2024 (wednesday), 2:00 Pm At The Fprdi Conference Hall, 4th Floor, Pprtc Building, Fprdi College, Laguna. Minimum Health Safety Protocols Shall Be Strictly Implemented. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission, Or (ii) Courier, At The Office Address Indicated Below On Or Before December 03, 2024 (tuesday), 2:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Form Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bids Opening Shall Be On December 03, 2024 (tuesday), 2:00 Pm., At Fprdi Conference Hall, 4th Floor, Pprtc Building, Fprdi College, Laguna. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. 10. The Fprdi Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Mary Grace B. Katigbak Bac Secretariat Dost-fprdi Domingo Lantican Ave (formerly Narra Rd.) Upcfnr Campus, Uplb, College, Laguna 4031 Telephone No. 049-536-2377 Local 1003 Telefax No. 049-536-3362 Email Address: Property@fprdi.dost.gov.ph Website: Https://fprdi.dost.gov.ph Loreto A. Novicio Bac Chairperson

Details: This Contract Concerns the "Refurbishment Work on the Goya, Piazetta/Murillo and Rosa Rooms Located Within the Louvre Museum". All of the Expected Work, Execution Terms and Site Constraints Are Detailed in the Common Technical Clauses1 (cctc or Lot 00: Clauses Common to All Lots) Common to All Lots and the Special Technical Clauses (cctp) Specific to Each Lot. The Work Concerns More Particularly: - The Restoration of the Floors, - The Recoloring of the Walls and Ceilings, The Integration of the Devices Necessary for Accessibility for People with Reduced Mobility. This operation will be carried out in conjunction with: 1. The operation known as the Pavillon des Sessions, for which a call for applications has been launched, 2. An operation to upgrade the security installations, a PMR lift and the toilets located in the work zone. The CFO/CFA and HVAC/Plumbing Works Will Be Carried Out by the Companies Responsible for Maintenance Work Within the EP.ML This Operation Is Broken Down According to the Following Lots: - Lot 01 - Site Installations - Scaffolding - Painting - Lot 02 - Carpentry The Works Will Be Broken Down Into 4 Operational Phases: - Phase I: Goya and Piazetta/Murillo Rooms - Phase II: Piazetta/Murillo Room - Phase III: Circulation Between the Piazetta/Murillo and Rosa Rooms - Phase IV: Rosa Room All of the Expected Works, Execution Conditions and Site Constraints Are Detailed in the Common Technical Clauses Booklet2 (CCTC) Common to All Lots and the Special Technical Clauses Booklet (CCTP) Specific to Each Lot.

Details: Description Invitation To Bid Project No.: (24-10-026) Procurement Of Materials And Tools For Inclusive Learning Resource Center 1. The Department Of Education (deped) Division Of Sultan Kudarat, Through The Cy 2024 Government Appropriations Act (gaa), Intends To Apply The Sum Of Two Million Six Hundred Thirty-one Thousand Five Hundred Thirty Pesos And Two Centavos (p2,631,530.02), Being The Approved Budget For The Contract (abc), To Eligible Payments Under The Contract For Procurement Of Materials And Tools For Inclusive Learning Resource Center Under Republic Act 11975 –fy 2024 Gaa. Bids Received That Exceed The Abc Shall Be Rejected At Bid Opening. Unit Item Description Quantity Unit Cost Total Cost Addition Specification Procurement Of Materials And Tools For Inclusive Learning Resource Center Piece Rubber Mat 36 1,083.33 39,000.00 Interlocking Rubber Mat 1 Meter X 1 Meter X 1" Unit Indoor Therapy Gym 1 106,509.70 106,509.70 89" High X 8', 10', Or 12' Long Monkey-bar System Free-standing Unit - Requires No Additional Bracing For Support Climbing Ladders On Both End Jungle Gym Crossbar Stationary Center Rotary System On 8' And 10' Models. Double Stationary Center Rotary System On 12' Model A Tracking System That Glides The Length Of The Monkey Bars Different Attachments Can Be Added Including Our Indoor Therapy Gym Attachments Kit And Platform Swing. Piece Vestibular Balls 5 1,100.00 5,500.00 Material Rubber Pattern Plain Shape Round Sizes 45-120 Cm (5 Sizes) 1,000/piece Unit Gait Trainer 1 60,500.00 60,500.00 Set Soft And Foldable Ball Pit Large 1 63,283.00 63,283.00 Small Round: 63" Diameter X 15.7"h. Weighs 14.3 Lbs. Holds 4-5 Kids And 1250 3" Diameter Balls. Color: Blue. Small Padding: 63" Diameter X 0.78"h. Weighs 14 Lbs. Small Padding: 63" Diameter X 0.78"h. Weighs 14 Lbs. Large Round: 78.7" Diameter X 15.7"h. Weighs 18.5 Lbs. Holds 6-7 Kids And 1500 3" Diameter Balls. Color: Blue. Large Padding: 78.7" Diameter X 0.78"h. Weighs 18.5 Lbs. Large Padding: 78.7" Diameter X 0.78"h. Weighs 18.5 Lbs. Medium Square: 78.7"l X 47.2"w X 15.7"h X 1.9"d. Weighs 20 Lbs. Holds 4-5 Kids And 1000 3" Diameter Balls. Pistachio, Blue, Orange And Lilac. Medium Padding: 78.7"l X 47.2"w X 0.78"h. Weighs 20 Lbs. Large Square: 78.7"l X 78.7"w X 15.7"h X 1.9"d. Weighs 27.6 Lbs. Holds 6-7 Kids And 1250 3" Diameter Balls. Pistachio, Blue, Orange And Lilac. Large Padding: 78.7"l X 78.7"w X 0.78"h. Weighs 27.5 Lbs. Made Of Pvc Upholstery. Filled With Polyethylene Foam Surface Wash. Air Dry. Unit Platform Swings( 2 Swings) 1 29,040.00 29,040.00 Adjusts In Tilt Using Control Lines Attached To A Top Disc Features A Soft Padded Edge That Prevents Therapist Injury Can Be Used In A Range Of Positions, Including Sitting, Standing, Prone, And Supine Adaptation Provides Security For Clients Who Feel Uncomfortable Taking Their Feet Off The Floor Adaptation Makes It Possible To Introduce Infants And Smaller Children To The Platform Swing Dimensions: 31"l X 31"w X 60"h Working Load: 300 Lbs. Weight: 21 Lbs. Set Indoor Climbing Walls 1 44,776.05 44,776.05 Six Wood Panels Adjustable Anchor Kit (select Either Concrete Or Dry Wall Style) Wall Bracket (required For Adjustable Anchor Kit) Letter Climbing Handholds (sold In Sets Of Six Ea.) Number Climbing Handholds (sold In Sets Of Six Ea.) Character Climbing Handholds (sold In Sets Of Six Ea.) Plain Climbing Handholds (sold In Sets Of Ten Ea.) Set Trampoline With Handrail 2 8,833.00 17,666.00 40-inch Jumping Surface Area Handrail Adjusts From 28.5" To 36.5"h 16lbs. Holds Up To 300 Lbs Black Unit Tumble Barrels 1 38,016.00 38,016.00 Inside Diameter 12" Outside Diameter: 22" Weight Capacity: 250 Lbs Latex Free Set Tactile Walls And Interacitve Equipment 1 126,808.00 126,808.00 Tactile Panel Measures 1820mm Wide X 1800mm High, 400mm To Be Cemented Into The Ground During Install. Set Wall Bars 1 3,509.00 3,509.00 Size: 190*70*10 Material: Beech Wood Or Poplar Wood Weight Bearing:150kgs Moq: 100pcs Set Adl Boards 1 1,149.50 1,149.50 6 Colors, 6 Different Dressing Skills Training. It Is A Good Way To Exercise Your Child's Finger Flexibility And Help The Kids Learn The Most Basic Dressing Skills. Is A Good Parent-child Toy.also A Good Preschool Education And Kindergarten Toys. A Quiet Skill Book Made Of Cardboard And Non-woven Fabric. Suitable For Children 2-7 Years Old. Package Dimensions: 11.73 X 9.76 X 2.28 Inches Item Weight: 1.28 Pounds Piece Horizontal Bolster Swing 1 3,500.00 3,500.00 Piece Sky Walker Swing 1 3,500.00 3,500.00 Piece Cuddle Swing 1 3,500.00 3,500.00 Piece Vertical Bolster Swing 1 3,500.00 3,500.00 Piece Rainbow Cloth Swing 1 3,000.00 3,000.00 Piece Box Swing 1 3,000.00 3,000.00 Piece Cargo Net 1 1,500.00 1,500.00 Piece Rock Wall Climbing 2 2,000.00 4,000.00 Set Crash Mat (5ft., Diameter 2in Thick) 4 4,500.00 18,000.00 Piece Crash Mat (5ft., Diameter 4in Thick) 4 7,150.00 28,600.00 Piece Foam (150cm X 150cm) 5 4,000.00 20,000.00 Piece Heavy Work Barrel 1 1,500.00 1,500.00 Piece Yoga Mat 10mm 2 500.00 1,000.00 Piece Yoga Ball 2 1,000.00 2,000.00 Piece Ball Pit 1 1,500.00 1,500.00 Set Rubber Wiggle Cushion 2 800.00 1,600.00 Set Rubber Hopper Ball 1 1,000.00 1,000.00 Piece Play Tunnel 1 1,500.00 1,500.00 Piece Pediatric Tent 1 2,500.00 2,500.00 Piece Punching Speed Ball 1 2,000.00 2,000.00 Piece Ready Stock Wooden Sorting Stacking Toys For 1-3 Years Old Toddlers Color Recognition Stacker Shape 3 1500 4,500.00 Piece The Learning Journey Lift & Learn Colors And Shapes Puzzle 3 1200 3,600.00 Piece Baby Toys 0-1-3 Year Old Puzzle Tower Children Tower Cup Sets Of Rings 6-12 Months 2 500 1,000.00 Piece Montessori Wooden Educational Toys For Kids Seven In One Traffic Matching Board Free 2 800 1,600.00 Set Montessori Around Bead Maze Gear Game Shape Matching Educational Alphabetic Animal Cognition 2 4000 8,000.00 Piece Wooden Giant Multifunctional Montessori Toy Box 3 1500 4,500.00 Unit Beestech Wooden Lacing Toy, Montessori Toys For Toodlers, 2, 3, Year Olds, Wooden Puzzles Preschool Activities, Fine Motor Skills Early Educational Toys For 2, 3 Years Old 3 1200 3,600.00 Unit Montessori Early Education Montessori Cylinder Socket Sensory Teaching Aids Educational 3 800 2,400.00 Unit Baby Shoe Tying Board Puzzle Shoe Tying Practive Toy With Round Buttons Sneaker Teaching Tie 4 500 2,000.00 Unit Lacing Jumbo Bead Toys 4 500 2,000.00 Unit Toddler Flah Cards-colors, Shapes, Numbers And Alphabet Flahscards 5 500 2,500.00 Unit Baby's First- First Objects Flash Cards -learning Tools For Kids 5 500 2,500.00 Unit 8 Types Of Double Sided Flahs Cards For Educational English Flash Cards, Children's Learning 5 300 1,500.00 Unit Enbe Economical Washable Non-slip Base Carpet E-fl-2001e 40cm X 60cm 2 1200 2,400.00 Unit Bulletin Cork Board 450x600mm/18x25in 2 700 1,400.00 Unit White Board, 50.3cm Height, 89.1cm Width, Magnetic 1 8000 8,000.00 Unit Tissue Paper Pack 5 300 1,500.00 Unit First Aid Kit Cabinet 1 2500 2,500.00 Piece Toilet Package (toilet Bowl With Flush, Sink, Fauet, Soap Dish And Tissue Holder) 1 8000 8,000.00 Set Stapler (big) 2 500 1,000.00 Piece Staples (big) 2 300 600.00 Piece White Board Pen 3 250 750.00 Piece White Board Ink 2 350 700.00 Piece Spray Bottle 2 200 400.00 Piece Laminator (hot And Cold) 1 4000 4,000.00 Piece Laminating Film(long)(125mic) 5 600 3,000.00 Bottle Universal Ink For Computer Printer (black, Cyan, Magenta & Yellow) 12 100 1,200.00 Piece Draw A Person: Screening Procedure For Emotional Disturbance (draw A Person: Sped) 1 19800 19,800.00 Piece Behavior Rating Inventory Of Executive Function - Second Edition 1 90900 90,900.00 Piece Developmental Profile 4 (dp-4) 1 70800 70,800.00 Piece Multiscore Depression Inventory For Children (mdi-c) 1 45000 45,000.00 Piece Autism Diagnostic Interview, Revised (adi-r) 1 65300 65,300.00 Piece Adult Suicidal Ideation Questionnaire (asiq) 1 28550 28,550.00 Meters Multidimensional Anxiety Questionnaire (maq) 1 115300 115,300.00 Sets Wechsler Intelligence Scare For Children – Fifth Edition (wisc-v) 1 390050 390,050.00 Piece Attention-deficit/hyperactivity Disorder Test 2nd Edition (adhdt-2) 1 37000 37,000.00 Glass Asperger Syndrome Diagnostic Scale 1 33,000 33,000.00 Piece Soap Dish 2 35.85 71.70 Piece Powder Detergent 2 228.50 457.00 Set Toilet Cleaning Brush With Holder 2 199.00 398.00 Set Shampoo Large 5 500.00 2,500.00 1liter Piece First Aid Kit And Cabinet 1 1,500.00 1,500.00 Piece Tissue Paper 12 Pcs Pack 8 300.00 2,400.00 Piece Hand Soap 10 50.00 500.00 Set Pans 3 250.00 750.00 Piece Toilet Paper Holder 3 237.60 712.80 Set Dipper 7 39.93 279.50 Piece Pail 9 199.56 1,796.00 Bottles Toothbrush 2 396.00 792.00 Piece Hairbrush 5 150.00 750.00 Piece Comb 10 50.00 500.00 Tube Toothpaste 10 150.00 1,500.00 Piece Plastic Tumbler 15 262.90 3,943.50 Set Razor 10 51.70 517.00 Set Nailclipper 20 74.80 1,496.00 Set Nail File 20 50.00 1,000.00 Set Deodorant 10 380.00 3,800.00 Set Feminine Napkin 10 300.00 3,000.00 Set Dust Catcher With Broom 1 558.40 558.40 Set Feather Duster 5 150.00 750.00 Dozen Sponge 12 10.00 120.00 Pieces Spray Bottle 5 150.00 750.00 Pieces Table Napkins 15 85.00 1,275.00 Pieces Placemat 10 100.00 1,000.00 Set Plates Large Size 5 550.00 2,750.00 Piece Pitcher 5 577.00 2,885.00 Pieces Bowls 30 20.00 600.00 Set Water Pail Large 1 500.00 500.00 Pieces Laundry Bar Soap 12 29.80 357.60 Pieces Clothesline 4 117.60 470.40 Packs Clothes Pins 5 130.80 654.00 Set Wash Basin 2 508.90 1,017.80 Set Laundry Bag 5 396.80 1,984.00 Pack Hangers 10 149.75 1,497.50 Pairs Socks 10 50.00 500.00 Piece Dress 1 275.00 275.00 Piece Dish Organizer 1 4,500.00 4,500.00 Sets Bed Sheets 4 1,899.00 7,596.00 Pieces Curtain 6 200.00 1,200.00 Piece Alarm Clock 1 446.60 446.60 Pcs Reading Stand 20 350.00 7,000.00 Piece Portable Generator Set 1 30,000.00 30,000.00 1250wx60hz Max Output, 1100w Rated Output Unleaded Gasoline 3.0hp Piece Trolley Table 1 4,300.00 4,300.00 Sets Canister With Scoop 6 200.00 1,200.00 Unit Learners'/clients' Chart Materials 10 254.10 2,541.00 Set Anatomical Models 1 37,873.00 37,873.00 Unit Blood Pressure 2 3,410.00 6,820.00 Unit Stethoscope 2 1,067.00 2,134.00 Piece Tape Measure 2 115.50 231.00 Piece Hand Dynamometer 2 1,650.00 3,300.00 Pack Ice Massage Caps 3 572.00 1,716.00 Unit Adjustable Height Exercise Steps 1 3,300.00 3,300.00 Piece Pediatric Examination Gowns 5 2,057.00 10,285.00 Piece Bath Towels 5 2,860.00 14,300.00 Material: High Quality 100% Cotton Terry – 500gm2. Size: 90 X 180cm. Pack Bed Sheets 1 2,000.00 2,000.00 Waterproof 5.5 Mil Vinyl Contoured Corners, Fitted 36" X 80" X 6" Case Of 12 Set Pillowcase 4 165.00 660.00 Piece Blankets 4 330.00 1,320.00 100% Canadian Cotton, Soft Texture, High Quality Fabric Size: 52 X 90 Inch Unit Step Stools 2 1,980.00 3,960.00 Double Steel Caravan Step. Rubber Non- Slip Steps. Leg Distance Front To Back 65 Cm. Width 42 Cm. Top Step Height 38 Cm. Bottom Step 20 Cm. Unit Therapist Stools On Wheels 2 3,212.00 6,424.00 Description: This Stool Can Be Adjusted To Just About Any Position You Want, Making It Incredibly Versatile And Comfortable. It Has A 360-degree Swivel So You Can Quickly Spin Around To Access Anything You Need At Home Or In The Office. The Unique Saddle Seat Has Thick Padding, Making It Easy For You To Stay In The Same Place For Hours At A Time. Piece Kinesiology Tape 5 1,034.00 5,170.00 Ultra-strong And Sticky-hypoallergenic Adhesive Water Resistant 97% Cotton, 3% Nylon 180% Stretch For Full Range Of Motion Latex And Zinc Free Sticks 2-7 Days 5-10 Applications Per Roll Each Is 2"x 16.4" (5cmx5cm) Gloves Gloves 2 180.00 360.00 Box Bubbles 5 200.00 1,000.00 Box Ballon 3 200.00 600.00 Box Playdough 3 250.00 750.00 Box Sad Box 2 250.00 500.00 Set 40 Pack Brick Block Set 12x6x3 1 8,542.50 8,542.50 Piece Puzzle Games Educational 5 300.00 1,500.00 Set Flash Cards Animals,colors, Numbers, Shapes 10 300.00 3,000.00 Piece Doctor Set Toy 1 700.00 700.00 Piece Cooking Set Toy 1 700.00 700.00 Piece Tool Set Toys 1 700.00 700.00 Piece Magnetic Fishing Toy 1 500.00 500.00 Piece Story Books With Integration Of Math,science,epp 20 150.00 3,000.00 Piece Containers Jar Plastic 10 50.00 500.00 Box Whistle 1 280.00 280.00 Box Baby Tether 10 80.00 800.00 Pack Figure Toys 5 300.00 1,500.00 Piece Shape Sorter 1 400.00 400.00 Piece Ring Stacking Toys 2 200.00 400.00 Pack Balls (plastic Balls) 2 250.00 500.00 Box Tongue Depressor 5 200.00 1,000.00 Set Communication Boards 3 5,082.00 15,246.00 Book And Cards Specification: Binder Features Two Interior Storage Pockets For Loose Materials, Color Black, And It Measures 9x7.5 Convenient To Travel And Put In Your Child's Backpack Or Carry In Hand. Binder Comes With 5 Different Colorful 10 Mil Poly Dividers, 3 Hard Strips (hook) Attached On Each Side To Hold 30 Cards. Each Card Measures 1.5 X 1.5. Inch Mounted With 1/2-inch Soft Dot (loop), And Round Corner Cut Safe For Little Hands From Scratching And Poking. Set Dry Erase Sleeves 5 550.00 2,750.00 Set Wind Up Toys 1 1,140.70 1,140.70 Piece File Folders 10 110.00 1,100.00 File 2 Rings 2" Thick Or 3" Thick From Cover To Cover Front , Inside And Back Cover Are All Same Cover Size: Long 14"l X 11"w X 3" Thick Color(s): Black, Blue, Green, Red Set Articulation Cards Super Duper Publications Set Of 7 Webber Articulation Card Decks With Animal Artic Pairs Combo Set 3 Educational Learning Resource For Children Super Duper Publications Super .. 1 13,302.85 13,302.85 Set Cognitive Cards For English Vocabulary In Early Childhood Education For Infants And Young Children,high Frequency Sight Word Flash Cards For Kindergarten Homeschool Supplies . 3 250.00 750.00 Set Single Vowels Double Vowels Single Consonants Double Consonants Sino Korean Numbers (useful Numbers Only) Pure Korean Numbers (useful Numbers Only) Months Of The Year Days Of The Week Telling Time Basic Words And Phrases Around The House 3 250.00 750.00 Pc 220 Sight Words High-frequency Poster Educational Set 10pcs Charts Vocabulary Building English Words Learning Materials For Kids Preschoolers Toddlers Classroom Wall Decorations Eeading Comprehension Prctice A4 Big Card 5 200.00 1,000.00 Pc 4 Pack Small Whisper Phones Speech Therapy Toys For Reading & Auditory Feedback - Hear Myself Sound Phone 8 250.00 2,000.00 Pc Word Sentence Pocket Charts Classroom Chart Standard Pocket Chart 5 636.00 3,180.00 Piece Adaptive Swim Life Jacket For Disabled 2 2,872.00 5,744.00 Piece White Bath Towels 15 379.75 5,696.25 Piece Broom With Dustpan Plastic 1 349.75 349.75 Set Hanger 12 Pieces Per Set 12 149.75 1,797.00 Piece Bath Soap 15 50.00 750.00 Set Wood Bathroom Mirror Cabinet 1 4,886.00 4,886.00 Piece Googles-silicon Strap Ywg278 6 99.50 597.00 Piece Ditrio Swim Ring Assorted Design And Color 2 279.50 559.00 Piece Ditrio 80 Cm Swim Ring Dino Design With Handle And Glitters Sya2061 2 279.50 559.00 Piece Spence Pvc/h Swim Goggles 6 199.00 1,194.00 Piece Inflatables Sports Ball 3 59.75 179.25 Piece Watermelon Design Swim Ring 70cm 4 179.50 718.00 Piece Beach Ball Colored Plastic 4 149.00 596.00 Piece Beach Volley Ball White Color 5 119.00 595.00 Piece 80 Cm Swim Ring Assorted Design Sya 6 159.50 957.00 Piece Swim Vest Small Ywsyb5022 4 259.50 1,038.00 Piece Swim Vest Medium Ywsyb5025s 4 159.50 638.00 Piece Swim Vest Large Ywsyb5023 4 199.50 798.00 Piece Water Gun 2 99.50 199.00 Piece Raion B/c Water Blaster 2 229.00 458.00 Piece Spence Pvc/h Swim Goggles 2 249.00 498.00 Piece Inflatable Md (1234619595506) 3 49.00 147.00 Piece Inflatable Md (1234614252) 3 79.00 237.00 Piece Bulletin Board 1 599.00 599.00 Piece Shoe Rack Platic/steel 2 699.75 1,399.50 Pieces Ball Pins 5 97.90 489.50 Pieces Acrylic Color Set 20 580.00 11,600.00 Pieces Cutters 20 68.00 1,360.00 Sets Watercolors 15 415.80 6,237.00 Reams Art Paper (multiple Colors) 20 218.90 4,378.00 Set Paint Brushes 15 250.00 3,750.00 Pieces Yarn Assorted Colors 20 71.50 1,430.00 Sets Colored Pencils 15 396.00 5,940.00 Sets Colored Pens 15 119.90 1,798.50 Pieces Sewing Pins 20 16.50 330.00 Pieces Sewing Needles 20 22.00 440.00 Pieces Rotary Cutter 10 159.50 1,595.00 Pieces Tape Measure 10 27.50 275.00 Pieces Crochet Hooks 15 284.90 4,273.50 Pieces Knitting Needles 15 104.50 1,567.50 Pieces Crochet Thread 20 45.10 902.00 Boxes Sewing Thread Assorted Colors 20 60.50 1,210.00 Pieces Studio/painting Easel 5 550.00 2,750.00 Pieces Manual And/or Electric Pencil Sharpener 5 64.90 324.50 Pieces Wooden Mannequin With Stand 1 1,200.00 1,200.00 Pieces Transparent Edge T-square 5 660.00 3,300.00 Sets 1 Toolset L Tool Set L Carpentry Tools L Maintenance Home Tools L Accessory Repair Tools L Taclight L Tac Light L Military Flashlight L Ultra Bright L Rechargeable Battery And Charger 2 1,493.80 2,987.60 Pieces T50 Staple Gun With Staples 10 163.90 1,639.00 Piece Slop Sink Stainless Large 2 9,075.00 18,150.00 Pieces Roofing Square Dual Marking Right Angle Picture Framing Carpenter Ruler 5 148.50 742.50 Pieces Professional Compound Mitre Box & Saw 10 533.50 5,335.00 Pieces Drawing Lamp 5 768.90 3,844.50 Pieces Chisel Rack For Wood Carving 5 1,042.80 5,214.00 Pieces Corner Clamp 10 211.20 2,112.00 Sets Decorative Realistic Artificial Fruits 2 589.60 1,179.20 Sets Geometric Shapes Set 2 1,760.00 3,520.00 Pieces Geometric Designer Templates 2 306.19 612.37 Pieces Stack Rack 2 5,608.90 11,217.80 Pieces Picture Frame And Miter Clamp 20 180.00 3,600.00 Pieces Heat Gun 5 770.00 3,850.00 Pieces Hot Plate Single Electric Stove 5 162.80 814.00 Pieces Tape Dispenser 5 107.80 539.00 Pieces Multi-function Three-hole Puncher 5 330.00 1,650.00 Pieces Metric Scale 8 55.00 440.00 Pieces Steel Tape Measure 15 Ft Or More 5 330.00 1,650.00 Pieces Heavy Duty Circular Saw 4 2,310.00 9,240.00 Pieces Abrasive Disc Cutter Machine 2 6,600.00 13,200.00 Set Manual Canvas Pliers 3 440.00 1,320.00 Sets Jet-bow Compass Set 5 220.00 1,100.00 Set Human Head Model 1 2,500.00 2,500.00 Sets Screw Drivers Set With Box 3 450.00 1,350.00 Sets Pliers And Grip Set 40 In 1 With Box Set 4 1,800.00 7,200.00 Pieces Artist Stool With Wheels 10 600.00 6,000.00 Pieces Screen Print Squeegee 10 500.00 5,000.00 Pieces Mixing Paint Palette 10 550.00 5,500.00 Sets Carving Chisels For Wood 5 550.00 2,750.00 Sets Files Set For Jeweler, Wood Carving, Craft Metal And Glass Stone 2 1,100.00 2,200.00 Pieces Heavy Duty Multi-purpose Bench Vise 2 1,320.00 2,640.00 Piece Anvil 1 880.00 880.00 Pieces Welding Protective Suite 5 500.00 2,500.00 Pieces Welding Apron 5 250.00 1,250.00 Pieces Welding Hood Caps 5 440.00 2,200.00 Pieces Welding Gloves 10 176.00 1,760.00 10.5" Welding Leather Gloves Hgvc01 *winland* Product Description • Size: 10.5" • Use For Driver, Machining Operator Etc. • All Applications Which Require A High Level Of Anti-skid And Abrasion-resistant • Applying Universally To The Transporting And Cargo Handling Workers, Recycling Work, And Horticulture Workers, Drivers And Etc. • Cow Split Leather Gloves • Full Palm, Full Lining • Made With Top Quality Material For Industrial And Commercial Use Pieces Welding Protective Visitor Glasses 4 99.00 396.00 Protective Visitor Glasses: Anti-fog With Uv Protection Glasses Product Name：safety Eyewear Glasses Color：clear, Dark Grey Feature：protective Glasses Lens Color：clear, Dark Grey Style：work Safety Glasses Package：blister Size: 17*17*7cm Pieces Welding Helmet With Auto Darkening 2 500.00 1,000.00 Auto Darkening Welding Helmet Ahm009 Viewing Area:90×35mm Cartridge Size:110×90×10mm Arc Sensor:2 Light State:din 4 Dark State:fixed Shade 10 Shade Control:unadjustable Power On/off:fully Automatic Sensitivity Control:unadjustable,auto Uv/ir Protection:din 16 Power Supply:solar Cells. Re-chargeable Battery .no Battery Change Required Switching Time:1/5000s,from Light To Dark Dark To Light:0.15-0.45s Auto Low Amperage Tig:≥20amps(dc), ≥20amps(ac) Operating Tep:-5°c~+55°c Storing Tep:-20°c~+70°c Pieces Welding Mask 2 440.00 880.00 Product Details Of Heavy Duty Welding Mask (108x50x3mm) Movable Glass Impacted Resistant Shell Anti Wear Moveable Type Glass Packing: Polybag With Color Sticker Pieces Hard Hat 12 330.00 3,960.00 Hard Safety Helmet With Chin Strap Color: Blue, Orange, White, Yellow Material: Acrylonitrile Butadiene Styrene (abs) Shell, With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap Tough, Lightweight, Durable With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap. A Hard Hat Is A Type Of Helmet Predominantly Used In Workplace Environments Such As Industrial Or Construction Sites To Protect The Head From Injury Due To Falling Objects, Impact With Other Objects, Debris, Rain, And Electric Shock. Durable, Lightweight And Comfortable Piece Heat Press Transfer Machine 1 9,900.00 9,900.00 Electric Powered 21.2 X 20.2 X 19.2 In. 220v 1800w 0-400˚f (0-220˚c) 0-999 Sec. Pieces Rubber Mallet 4 330.00 1,320.00 Rubber Hammerhead Fiberglass Handle Packing: Color Label Weight: 32oz Pieces Ball Peen Hammer 4 330.00 1,320.00 Material: Fiberglass Handle & Steel Head Size : 16 Ounce Weight: 3.7 Pound Pieces Cutting Mat 6 550.00 3,300.00 Flexible Cutting Mat A2 Size (24 X 18 Inch) Self-healing 5 Layered Double Sided With Marked Pattern And Grids (green) Material: Polyvinyl Chloride Color: Green Item Dimensions: 15 X 15 X 15 Centimeters Shape: Hexagonal Weight: 200 Grams Pieces Soft Box With Stand 2 1,147.41 2,294.82 Pieces Monolights 2 2,875.40 5,750.80 Pieces Reflector With Holder 2 3,800.00 7,600.00 Pieces Boom Light Stand And Reflector Holder 1 4,654.93 4,654.93 Piece Display Panel Board 1 11,909.70 11,909.70 Pieces Offline Mini Compressor 1 5,489.00 5,489.00 220v 60hz, Type: Single Cylinder Piston Compressor With Air Tank, Power: 1/6hp, Speed: 1700r.p.m, Air Output Per Min/lit.:20-23l/min, Auto Stop, Start At 3bar (43 Psi) Stop At 4bar (57psi), Working Pressure:0-4 Bar, Air Tank:3.0l, Suitable For Airbrush With Nozzle 0.2mm-1.0mm, Weight: 5kg, Dimension: 31x13x31cm Piece Styrofoam Cutter 10 204.40 2,044.02 Material:plastic, Size:approx. 190x90mm, Power: 2xc Size Battery (not Included), Feature: Electric Wire Needle Shap, Stainless Steel Wire, Hardness And Diameter Of 0.19mm Piece Weather-proof Safety Box Circuit Breaker 1 1,862.68 1,862.68 Metal Enclosure Panel Box, Weatherproof, Height:300mm, Depth:150mm, Door: 0.8mm, Body: 0.8mm, Plate: 0.8mm, Metal Body,width:400mm Pieces Fire Blanket 4 638.00 2,552.00 120x99x4cm (l X W X H) Woven Glass Fiber Pieces Exhaust Fan 5 968.00 4,840.00 Size: 12" 9" 6" Rpm: 1350, 1320, 1290 Finish: Power Coated Pieces Disposal Bins Large 2 1,652.20 3,304.40 50 Cubic Movable Bins Pieces Portable Welding Machine 1 8,500.00 8,500.00 Piece Dressmaking Shears 4 500.00 2,000.00 Pieces Reading Stand 3 2,055.22 6,165.67 Piece Plasma Display 1 10,000.00 10,000.00 Set Fire Extinguiser 12 4,000.00 48,000.00 10lb Piece Track Pad 1 650.00 650.00 Bottle Bottled Water For Dispenser Gallon 8 268.75 2,150.00 Piece Garbage Bin 13 376.92307 4,900.00 Piece Facetowels 42 95.45 4,008.90 Pair Slippers 21 119.05 2,500.00 Set Of 6 Drinking Glasses 23 798.26 18,360.00 Pieces Scissors Large 25 169.10 4,227.50 Pieces Glue (big) 30 110.60 3,318.00 Piece Wash Rags 25 142.00 3,550.00 Piece Scotch Tape 10 130 1,300.00 Set Of 6 Tea Cups With Saucer And Teaspoon 22 395.94 8,710.70 Set Mirror 1 9,740.50 9,740.50 Aluminum Frame (thickness 1/4 Inch X 4 X 8 Ft) Piece Gym Mirror 2 12,000.00 24,000.00 Aluminum Frame (thickness 1/2 Inch X 4 X 8 Ft) Piece Home Gallery Tornado Mop And Spin Dry Bucket Set 11 704.431818 7,748.75 Piece Pillows 15 397.33 5,960.00 Pillow Shape: Rectangle Pillow Weight: 0.95-1000 Grams Pillow Height: 12.7cm Pillow Width: 40.64cm Pillow Length: 66.04cm Pillow Size: 40 X 66 Cm Pillow Material: 100% Cotton Pillow Filing: Cotton Poly-fiber Pieces Chef’s Knife 3 1,639.00 4,917.00 Stainless Steel Chef Chopping Knife Household Kitchen Knife Size: 8 Inches Blade Material: 3cr14 High Carbon Stainless Steel Blade Handle: Pom Handle Pieces Boning Knife 2 1,177.00 2,354.00 6″ Boning Knife Chef’s Edge Handles Are Ergonomically Designed To Minimize Wrist Tension And Provide A Natural Fit. Heat Treatment Process Makes The Knives Extremely Sharp And Corrosion Resistance. Country Of Origin: Germany Blade Material: 3cr14 High Carbon Stainless Steel Blade Handle: Pom Handle Pieces Oysters Knife 2 203.50 407.00 Material: Stainless Blade, Plastic Handle Size: 16 Cm Easily Pry Open Oyster/clam Shells Sharp, Beveled Blade Pieces Cleaver Knife 2 660.00 1,320.00 Butcher Cleaver Knife With Ergonomic Design Highly Corrosion Resistant Stainless Steel Wooden Handle Handle Length Measures 5" Blade Length Measures 8" Long And 3.5" Wide Dishwasher-safe Blade Material: Stainless Steel Color: Stainless Steel Handle Material: Wood Blade Edge: Plain Pieces Tenderizer (pin Tenderizer) 2 286.00 572.00 Stainless-steel Prongs Break Down Tough Meat Fibers. Also Useful For Piercing Meats Before Marinating. Heavy-duty Spring-loaded Mechanism Controls Action Precisely. A Practical Solution For Turning A Tough Cut Of Meat Into A Delicious, Tender Piece Of Meat. Type: Meat Tenderizer Material: Stainless-steel, Abs Size: 5cm X 5.1cm X 19.4cm/1.97" X 2.01" X 7.64" (approx.) Pieces Tenderizer (mallet Tenderizer) 4 715.00 2,860.00 Material: Aluminum Weight:100g Size: Length: 19.5cm; Hammer: 4.5 * 4.5cm Integrated Aluminum Construction For Strength And Durability. There Are Two Sides. Use The Spiked Surface To Tenderize And The Flat Surface To Pound Meat. Ideal For Beef, Veal, Pork And Chicken, Etc. Package Content: 1x Two Side Meat Hammer Pieces Skimmer, Fine 4 62.70 250.80 6"x5"length Width 5" Handle: Length11 5/8 Material: Nickel-plated Stainless Steel Handle Material: Nickel Plated Pieces Wire Skimmer, Small 4 96.80 387.20 3" Diameter X 1"depth 13.75 Handle Length Material: Stainless Steel, Bamboo Handle Pieces Skimmers, Spider 2 1,705.00 3,410.00 Mesh Basket Tool(5inches) Material:18/8 Stainless Steel, Style Stainless Steel Mesh, Asian, Color: Silver Pieces Strainer, Small, Fine 4 132.00 528.00 Material: Stainless Steel Diameter: Approx. 8.5cm / 3.35 Inch Total Length: Approx. 22cm / 8.66 Inch Handle Length: Approx. 11.2cm / 4.41 Inch Color: Silver/golden/copper Plating (optional) Package Includes: 1 Piece Fine Mesh Stainless Steel Cocktail Strainer Pieces Colander Strainer 4 165.00 660.00 Type: Colanders & Strainers Item Type: Pearl Milk Tea Colander Material: 100% Food Grade Stainless Steel Temperature: -40f To +446f (-40c To +230c) Multiple Use Kitchen Gadgets: Kitchen Helper Feature: Made Of Premium Stainless Steel, No Toxic Chemicals, Lead Free, Pvc Free. The Versatile Design Will Fit Nearly All-round Pots, Pans And Bowls. Uses: For Hot Pot Eating, Soup Draining And Pearl Food Holding. Pieces Siever,small 4 440.00 1,760.00 Stainless Steel Fine Mesh Strainer Material: Stainless Steel; Diameter: 12 Inches; Depth: 2 Inches To 2.5 Inches; Fine Mesh:0.025mm To 0.5mm; Pieces Strainer,medium Fine 8 182.60 1,460.80 Strainer Type: Easy-grip Colander Medium:stainless Steel:item Dimensions:lxwxh: 8x4x0.2 Inches Pieces Turner, 3” X 6” 4 286.00 1,144.00 Item Dimension: L40.1 Cm X W9.6 Cm X H13.4 Cm Item Weight: 0.3 Kg Material: 18/10 Stainless Steel Tool Head & High Impact Nsf Approved Polypropylene Textured Handles (pro-gourmet) Lightweight & Easy To Hold Accommodates Right- And Left-handed Users Use & Care Easy To Clean And Dishwasher Safe. Pieces Spatula 4 264.00 1,056.00 Stainless Steel Teppanyaki Spatula L 14.8cmxw11.8cmxh 2cm Pieces Wooden Spoon 8 143.00 1,144.00 Material: Beech Wood Color: Wood Color Size: 26.3cm X 6.3cm Pieces Parisienne Scoop 8 60.50 484.00 Stainless Steel Baller Heads - 22mm Diameter And 25mm Diameter. Head Include Small Air Hole For Easy Release. Non-slip Handle Made From Fibrox - Tpe Plastic Able To Withstand Temperatures Of Up To 80°c - 110°c. Dishwasher Safe. Pieces Zester 8 220.00 1,760.00 Durable And Rust Resistant Stainless Steel Material Five Sharp Zester Holes That Quickly And Easily Zest Lemons, Oranges, And Other Citrus Fruits Built-in Channel Knife That Peels Citrus Fruits To Make Beautiful Garnishing Easy To Grip Stainless Steel Handle For Steady Control When Testing With A Built-in Hole For Easy And Proper Storage Easy To Clean And Dishwasher Safe Dimensions: L16.3 X W2.4 X H16.3 Cm Sets Piping Bag 4 352.00 1,408.00 Size: Small: About 26cm Long, About 15cm Wide At The Opening, Medium: About 30cm Long, About 17cm Wide At The Opening, Large: About 34cm Long, About 21cm Wide At The Opening. Material: Silica Gel Package: 6 * Small Connectors 2 * 12-inch Bags 2 * 14-inch Bags 2 * 16-inch Bags Pieces Pastry Tubes 8 85.80 686.40 8pcs/set Stainless Steel Pastry Piping Nozzles Size: Approx. 30cmx17.5cm; Material: Eva And 430 Stainless Steel Pieces Strainer Chinois,small 1 3,478.20 3,478.20 Commercial Grade Quality China Cap Strainer With Pot Ring Hang Hook Coarse Mesh - 10" Handle, 8" Diameter, 8" Deep", 18" Total Length Material:18/8 Stainless Steel Color:silver Item Dimensions: Lxwxh 17.13 X 8 X 7.75 Inches Item Weight:0.71 Lbs Pieces Filling Funnel 4 165.00 660.00 Material:304 Stainless Steel Size Dimension:14x11cm Pieces Measuring Spoon 6 165.00 990.00 Material: Stainless Steel , Weight:110g Size:1/8 Tsp-length: 4.25″,diameter: 0.59″ 1/4 Tsp-length: 4.33″,diameter: 0.71″ 1/2 Tsp-length: 4.45″,diameter: 0.91″ 1 Tsp-length: 4.60″,diameter: 1.10″ 1/2 Tbsp-length: 4.72″,diameter: 1.26″ 1 Tbsp-length: 4.92″,diameter: 1.57 Pieces Tongs, 9 Inches 10 53.90 539.00 Material: 304 Stainless Steel With Silicone Handle; Size:9 Inches; Feature: Ring Pull Locking System, Scalloped Heads Pieces Tongs, 12 Inches 5 165.00 825.00 Material: 304 Stainless Steel With Silicone Handle; Size:12 Inches; Feature: Ring Pull Locking System, Scalloped Heads Set Measuring Cup 1 253.00 253.00 Material: 304 Stainless Steel; Feature: 4cups/set. 100ml, 50ml, 15ml And 5ml Cup Sizes On A Storage Ring; Piece Measuring Urn 1 598.40 598.40 Specification: 500ml Colour: Silver Material: 304 Stainless Steel Pieces Ice Cream Scoop 4 154.00 616.00 Size: 18*4.2cm/18*4.8cm Color: Black/silver Material: Aluminum Alloy; Feature: Anti-freeze Ice Cream Scooper With Comfortable Handle Pieces Cheese Cloth 6 150.70 904.20 *made Of Natural Cotton, Never Been Dyed Or Bleached. It's Safe And Healthy To Use And There Is No Color Will Dye Over The Cheese, Yogurt, Turkey Or Any Other Foods. *due To Tight-weave Mesh, It Can Filter More Impurities And Work Efficiently. *it Could Be Used For Making And Wrapping Homemade Cheese. It Is Used As Greek Yogurt Or Butter, Almond Milk Or Nut Milk, Fruit Juice. Furthermore, More Impurities Will Be Filtered Out When You Filter Cold Brew Coffee Or Homemade Beer Wort, Honey And Etc. Specification: *material:cotton *color:as Show *size:100 X 120 Cm/39.3 X 49.2 In Pieces Serving Spoon 15 187.00 2,805.00 Material: 304 Stainless Steel Color: Silver Size: 24cm Set Pepper And Salt Grinder 4 110.00 440.00 Size: 5.3cm/2.09"x 19cm/7.48"; Material: Stainless Steel Case Grinder With High Quality Glass Container Unit Weighing Scale, 5 Kgs 2 1,661.00 3,322.00 Type:hanging Scale Origin:cn(origin) Size:18.5*14*1.9cm Rated Load:other Display Type:lcd Digital Screen Power Supply:3*aaa Battery(not Included) Certification:ce Model Number:electric Scale Capacity:10kg/1g,3kg/5kg/0.1g Is Smart Device:no Color:black Unit:g, Lb, Oz Measuring Range:10kg/10g, 3kg/5kg/1g Material:new Abs Engineering Plastic + Stainless Steel Backlight:yes Ftion 1:kitchen Scales Ftion 2:jewelry Scales Ftion 3:electronic Scales Ftion 4:electronic Balance Pieces Core Seed Remover 8 72.60 580.80 Effortlessly Remove Cores From Fruit Simply Push The Stem Into The Core Of The Apple And Twist To Remove Ultra Stainless Steel Coring Blade Twist And Slide Body For Easy Core Removal Length: Approx. 180mm / 7inch Diameter Of The Core: Approx. 2cm / 0.8 Inch Material: 304 Stainless Steel Pieces Wire Whisk,small 8 185.90 1,487.20 Material: Stainless Steel; Size: H01-8 Inch:21*5cm; Pieces Wire Whisk, Medium 8 220.00 1,760.00 Material: Stainless Steel; Size: H02-10 Inch:26*6cm; Pieces Wire Whisk, Heavy Duty 2 220.00 440.00 Material: Stainless Steel; Size: H03-12 Inch:29*6cm Piece Can Opener 1 121.00 121.00 Material: Stainless Steel + Pp Plastic Size: 19.5cm X 7.5cm Color: Silver + Black Features: 1. 100%brand New And High Quality 2. Ergonomic, Non-slip Grip, Comfortable And Safe In Operation. 3. High-quality Stainless Steel Material, Won't Break Or Bend, Corrosion Resistant, Smooth Felling And High Durability. 4. Rotating Handle And Precision Gears, Efficient And Labor Saving, Children, Adults And The Elderly Can Easily Work With. 5. It Combines 3 Functions In One Unit. This Versatile Can Opener Is Designed For Opening A Can Lid, Opening A Bottle Cap, Levering Or Loosening A Can Lid. 6. Easily Pierce And Open Various Types Of Cans, Like Tin Can, Oil Can, Milk Can, Cat Dog Food Can, Metal Can, Beer Can, Small Can, Large Can, Water Bottle, Jar Etc 7. High Quality Food-grade Material - The Sharp Cutting Disc Is Made Of Food-grade Material Especially The Metal Tooth Is Made Of Stainless Steel, Please Rest Assured Use. 8. No Dangerous Sharp Edges - Protect Yourself And Your Family With This Tin Opener That Leaves Edges Completely Smooth. Safely And Easily Opens Big And Small Cans In All Shapes And Sizes In Seconds. 9. Comfortable And Convenient For Storage - The Opener's Soft, Anti-slip Handles Are Easy To Grip - Which Is Especially Handy For Senior Citizens. You Can Store It In A Drawer Or Simply Hang It On A Hook In Your Kitchen. Pieces Multi-purpose Kitchen Scissors/shears 5 326.70 1,633.50 Material: Stainless Steel Size: 21 X 9 Cm; Features: Extra Sharp For Cutting Meat, Poultry Or Fish With Cracking And Bottle Opening Function Pieces Soup Ladle, 4 Oz 8 71.50 572.00 Material: 18/10 Stainless Steel With Hole On Handle Serving. Size: Length 34cm*diameter 7.5cm Pieces Soup Ladle, 6 Oz 8 71.50 572.00 Material: 18/10 Stainless Steel With Hole On Handle Capacity: 6 0z; Handle Length:3 Inches; Size: Length 34cm*diameter 9.5cm Pieces Soup Ladle, 8 Oz 3 1,210.00 3,630.00 Color: Stainless Steel Material: Stainless Steel Style: 8 Oz Ladle Item Dimension Lxwxh: 14.6 X 2.5 X 3.9 Pieces Soup Ladle, 12 Oz 2 1,210.00 2,420.00 Soup Ladle Food Grade Rust-proof Stainless Steel Dishwasher Safe Hot Pot Soup Ladle Length: 18 Width: 4.6 Height: 2 Freezer Safe: Yes Type: Gravy / Sauce Ladles Dishwasher Safe: Yes Microwave Safe: No Capacity: 10.0-14.9oz Feature: Heavy Duty Pieces Kitchen Spoon 8 220.00 1,760.00 Mirror Finished Durable Stainless Steel Material Dishwasher Safe Ss Dinner Spoon 4.0mm Thickness Length: 21cm Weight: 73gm Pieces Kitchen Spoon, Slotted 5 660.00 3,300.00 Stainless Steel Slotted Spoon Is Ideal For Stirring And Straining Pasta Or Vegetables. The Soft, Non-slip Handle Cushions Your Hand During Use, And The Polished Stainless Steel Is Both Sleek And Durable. Dimensions: 2 X 2.75 X 12.4 Weight: 0.29 Pieces Kitchen Fork 2 1,650.00 3,300.00 Color: Silver Substance: 18/10 Stainless Steel Surface Finishing: Matt/polished Net Weight: 0.11 Kg Length: 33.40 Cm Width: 2.50 Cm Height: 1.90 Cm Handle Length: 12.50 Cm Pieces Carving Fork 2 1,320.00 2,640.00 Package Dimensions: 13.07 X 1.42 X 0.87 Inches (33.2 X 3.6 X 2.2 Cm) Item Weight: 5.6 Ounces (158.76 Grams) Handle Material: Stainless, Stainless Steel, Abs, Plastic, Steel Pieces Digital Kitchen Thermometer 3 127.60 382.80 Digital Kitchen Food Thermometer For Meat Cooking Water Milk Food Probe Temperature Temperature Range: -50°c To 300°c Or -58°f To 572°f Resolution: 0.1°c Or 0.1°f Accuracy: ± 1°c Or ± 1 °f Optional Temperature Unit: °c / °f Material: 304 Stainless Steel & Abs Plastic Buttons: On/off, °c/°f, Hold Power Supply: 1 X 1.5v Lr44/ag13 Battery (not Included) Power Saving: Auto Power Off After 10 Minutes Total Length: 24.6cm Probe Length: 14.5cm Set Multi-function Vegetable Fruit Peeler Slicer Cutter Chopper 2 290.40 580.80 Stainless Steel Multifunction Fruit And Vegetable Peeler Slicer Shedder Peeler 5 Different Inserts With 11 Different Ways To Cut Cut Into Cubes Or Sticks In 3 Different Sizes Slices In 2 Different Thicknesses Cut In To Quarters, Eighths And Wedges Long- Lasting Super- Sharp Stainless Steel Blades Extra Sharp Grater Mandolin Slicer With Safety Food Holder 1 X Cutting Top With Integrated Stylus 1 X Cutting Base 1 X Transparent Collecting Container (capacity 1,500 Ml) 1 X Fresh Cover For Collecting Container 1 X Knife Insert (6 Mm X 6 Mm Or 12 Mm X 12 Mm) 1 X Knife Insert For Quarter Or Eighth 1 X Planer Insert With Blade Protection 1 X Food Holder With Guide 1 X Detachable Cutting Punch For Eighth 1 X Part Cover For All Knife Inserts Pieces Stock Pot (big) 2 6,270.00 12,540.00 Stainless Steel Large Stock Pots Casserole Stew Pan Type: Soup & Stock Pots Material: Metal Type: Stainless Steel Feature: Eco-friendly Applicable Stove: General Use For Gas And Induction Cooker Product Name: Soup Pot Usage: Soup, Milk, Noodle Pot, Cooking Pots Shape: Straight Material Type: Stainless Steel Diameter: 25 / 30 / 35/ 40 /45/ 50 Cm Pieces Frying Pan, Small 4 990.00 3,960.00 Frying A Single Egg, Sausages, Seafood, Poultry, Burgers Or Vegetables, Toasting Pine Nuts Or Even Toasting Off Some Spices. Specification: Pot Diameter: 13cm Pot Height: 2.8cm Full Length Of Pot Body: 25cm Pot Bottom Diameter: 11.5cm Included: 1 X Mini Saucepan 12cm Small Nonstick Frying Pan For Household Fried Egg Pancakes Round Mini Saucepan Pieces Frying Pan, Medium 4 385.00 1,540.00 Material: 304 Stainless Steel Size Diameter: 32cm Feature: New Technology Experience, New Design Suitable For: General Use For Gas And Induction Cooker Product Features: 1.13.4 Inch Stir Fry Pan Made Of Stainless Steel, Nonstick Cookware Interior Is Honeycomb Texture, Achieve Separation State Nonstick. Pieces Frying Pan, Large 2 1,980.00 3,960.00 Material: Carbon Steel Wok Handle: 12cm Wood (beechwood) Diameter: 36cm Depth: 10.5cm Handle Socket: Welded Non-stick Pan, Perfect For Your Daily Home Cooking Pieces Colander, Small 3 132.00 396.00 Ergonomic Design, Smooth Handle Grip. Top Hanging Ring Design, Free To Hang Up. Specification: Material: Stainless Steel Size: 32 * 10cm / 12.60 * 3.94" Color: As Shown Package Included: 1pc * Colander Pieces Colander, Medium 2 220.00 440.00 Features And Usage: Good Quality Stainless Steel Material With Competitive Price Can Be Used For Strain Soup, Juice, Milk, Tea, And Other Liquids. Strong, Sturdy, And Durable. Made For Heavy Work. Rust, Crack, And Stain Resistant Easy To Clean And Carry High, The Goods Quality Support With Your Demand. The Long Handles Protect Your Hands From Hot Grease And Oils While Letting You Cook Your Favorite Foods Product Name: Stainless Kitchen Wire Skimmer/strainer/colander Material: Stainless Steel Size / Capacity: 22cm Color: Silver Shape, Round Type: Strainer Item Number: 22cm F/h Skimmer Pieces Cutting Board 4 165.00 660.00 Packing: 1 X 1pcs Chopping Board Material: Bamboo Wood + Stainless Steel Color: Brown, Light Brown (random) Size: 34cmx 1.7cm X 24cm Design: Arc Corners Features: Made Of High-quality Bamboo Anti-mildew And Germ Proofing 100% Brand New And High Quality Easy To Clean And Very Affordable The Whole Bamboo Panel Has A Clear Bamboo Pattern. The Curved Design Of The Handle Makes It Easy To Hang. Thick, Extremely Durable, The Smooth Surface Also Prevents Your Knives From Dulling Too Quickly. Piece Fish Poacher, Medium 1 2,860.00 2,860.00 Stainless Steel Fish Streamer For Big Fish, Big Cooking Pot With Complete Accessories Pan Material: Stainless Steel Thickness: 0.7mm (+0.3mm) Dimensions (l X W X D): 18" X 5" X 6" (±0.5") Handle Material: Stainless Steel; With Two Side Handles Includes A Lid With Handle And A Perforated Rack Insert Dishwasher Safe Pieces Casserole, Small 4 313.50 1,254.00 Aluminum Casserole High Quality Aluminum Durable Handles & Knobs Size #14 (25cm Diameter, 15cm Height) Color: Aluminum Size: 35cm*28cm*20cm Weight: 0.7kg Pieces Casserole, Medium 3 1,980.00 5,940.00 Heavy Gauge Aluminum Forged Base For Extreme Strength And Wrap Prevention Durable 3 Layer Blue Diamond Non-stick Coating Coating Lasts Longer Than Any Other Pan Works On All Stovetops: Induction, Gas, Electric, Ceramic, Etc. Heat Resistant Riveted Bakelite Handle And Knob Tempered Glass Lid Heats Up Quickly And Evenly Ideal For Healthy Cooking Easy-to-clean And Dishwasher Safe Pieces Wok, Small 4 1,100.00 4,400.00 Material: Wok Is Made With Carbon Steel With Wooden Handle Available Size: 34cm Diameter Double Handle Suitable For Gas Stove And Induction Cooker Good Thermal Conductance For Even Cooking Of Vegetables And Meat Piece Wok, Medium 1 9,460.00 9,460.00 Features And Usage: Whether Stir-frying Veggies Eggs Meats Or More This Wok Distributes Heat Evenly And Wipes Clean When You’re Finished Riveted Acacia Wood Handles Make Flipping And Releasing Food Easy And Will Add A Touch Of Elegance To Your Kitchen Perfect For Veteran Chefs Or Others Simply Looking To Expand Their Culinary Palette This Wok Serves Up Delicious Results With Effortless Performance Color: Black Size: 14” Material: Carbon Steel Wok Non-stick Surface Healthier Cooking Piece Double Boiler, Medium 1 1,977.80 1,977.80 Specialty Pan Type: Egg Poacher/boiler Cookware Material: Stainless Steel Cookware Capacity: 1.1l - 2l Cookware Diameter (cm): 22 Model: Db22. Cookware Features: Includes Lid, Dishwasher Safe, Induction Safe, Helper Handle, Pfoa Free, Eco Friendly, Cover Included What’s In The Box: 1 X Double Boiler 22cm Pieces Paellera 5 1,760.00 8,800.00 Product Details: Made With Top Grade Carbon Steel, These Pans Conduct Heat Quickly And Evenly Throughout To Create The Perfect Paella. It’s Thin And Lightweight Material Makes This Pan Durable And Trustworthy. It’s Innovative Hammered Dimple Technology Makes The Bottoms Of The Pans Rigid And Perfect For Cooking Paellas Package Dimensions: 15.24 X 13.62 X 2.05 Inches (38.7 X 34.6 X 5.2 Cm) Item Weight: 2 Pounds (0.9 Kg) Material: Carbon Steel Item Diameter: 13 Inches (33 Cm) Color: Silver Capacity: 468 Cubic Inches (1188.7 Cm) Pieces Glass Rack 2 627.00 1,254.00 Description: Product Category: Wine Glass Rack Color: Black Height: 5.5 Cm Width: 22.5 Cm3 5 Rows: 50cm In Length, Can Hold 10-15 Weight: 0.55kg For 5 Rows Application: 4cm- 9cm In Base Diameter, Less Than 3cm In Column Diameter, 10cm In Belly Diameter Of Glass. Material: Iron Product List:1* Wine Glass Pieces Soup Cup Rack 4 3,080.00 12,320.00 Material: Plastic Color: Grey Shape: Square Length: 19.75" In Width: 19.75" In Height: 4" In Size: Compartment 4.375"l X 4.375"w X 4.25" Temperature Range: Up To 200°f Features: Dishwasher Safe Pieces Plate Rack 2 770.00 1,540.00 Specification: Color: White, Green Material: Stainless Steel Dimension: W X L X H (25cm X 50cm X 43.5cm) Features: Stainless Steel Material, No Rusting, Long Lasting Durability. Saves Tons Of Space And Time By Making It Easier To Access Utensils And Supplies, Making Your Kitchen More Clean And Tidy. Dish Placement Area (16 Dishes) Cutting Board Placement Area (5cm/1.97in) Tool Placement Area: 3 Spaced Grids Hanging Spoon Placement Area: 4 Storage Hooks Bowl Placement Area: More Than 12 Bowls Removable Drain Board Pieces Baking Tray, Small 8 165.00 1,320.00 1pc Small Rectangular Baking Tray Measurement: 8x12 8x 12 Outside, 6.5x10 Inside Color: Black Made Of Carbon Steel Durable And Good Quality This Can Be Fit To Small Oven Pieces Utility Tray, Stainless 8 1,430.00 11,440.00 Stainless Steel Food Measurement: 9" Length X 6.75" Width X 1" Height. Material: Stainless Steel. Pieces Roasting Pan 2 1,430.00 2,860.00 Material: Stainless Steel Color: Silver Size: 42*32*7cm Features: Easy To Clean Up. Big Enough For Whole Chicken Or Turkey. Very Convenient To Serve With Rack. Package Included: 1 X Pan (with A Rack) Pack Dishtowels 5 385.00 1,925.00 Material: Cotton/linen Blend With High Absorption Capacity. Color: Square Stripe/gray Beige Length: 70 Cm (28 ") Width: 50 Cm (20 ") Package Quantity: 2 Pieces Set Plastic “silverware” Or Real Silverware 1 3,410.00 3,410.00 Package Dimensions: 9.92 X 6.57 X 3.23 Inches (25.2 X 16.7 X 8.2 Cm) Item Weight: 7 Pounds (3.15 Kg) Material: Stainless Steel Finish Type: Polished Color: Silver Is Stain Resistant: Yes Is Dishwasher Safe: Yes Number Of Pieces: 60 Set Small Plate/saucers 4 484.00 1,936.00 Piece Cabinet Dish Organizer 1 1,978.90 1,978.90 Piece Sink 1 5,819.00 5,819.00 Pieces Sponge And Soap Holder For Kitchen Sink 3 297.00 891.00 Set Pots/pans 1 6,270.00 6,270.00 Set Cooking Utensils 1 3,630.00 3,630.00 Set Rotary Egg Beater 2 121.00 242.00 Piece Scraper 3 104.50 313.50 Piece Drawers 1 11,000.00 11,000.00 Piece Cupboards 1 11,000.00 11,000.00 Piece Brush 3 66.00 198.00 Piece Kitchen Scale 2 165.00 330.00 Pieces Kitchen Shears 2 330.00 660.00 Multifunction Comfortable Handle Kitchen Scissors Heavy Duty Food Shears For Chicken Meat, Vegetable Fish Heb, Poultry Stainless Steel Cooking Scissors Material:30cr13 Stainless Steel Highly Antagonistic And Very Sharp- Soft And Hard Double Plastic Handle Double-edged Blade Non-slip, Stable Removable Rivet Design Flexible Application, Easy To Clean Package Included:1 X Stainless Steel Kitchen Shears Color: Black + Silver Weight: 145g Size: 227 X 78 Mm Piece Potato Masher 2 288.59 577.17 Multifunctional Stainless Steel Potato Masher For Fruit, Vegetable Baby Food Supplement Mashed Potato Tool Selected Materials, Safe And Durable. Strong And Not Easy To Rust. Ergonomic Design, Easy To Use And Save Effort. Suitable For A Variety Of Foods. Material: 304 Stainless Steel 4mm Thickness One-piece Molding Size: 7 Cm X 7 Cm X 13.6 Cm Color: Silver Sets Graters 2 286.00 572.00 Product Name: Tabletop Drum Grater High Quality: The 3 Different Rotary Ultra-sharp Cylinders Slicer Made Of Food Grade Stainless Steel. All Pieces Are Detachable For Easy To Clean, Dishwasher Safe Universal Fit: Rotary Drum Grater Is Great For Cheese, Vegetables, Potatoes, Coleslaw, Nuts, Hash Browns, Onions And More With This Hand-powered Rotary Grater Cooking Choice: Rotary Cheese Grater Package Includes 3 Different Interchangeable Rotary Ultra-sharp Cylinders Drums For Different Cooking Choice Features: The Drum Shredder With Suction Base Ensures Solid Grip And Stability On Flat Surface; Simple Hand Crank Turns Drum Creates Perfectly Grated Ingredients Type: Graters Use: Home Kitchen Material: Metal, Stainless Steel & Abs Plastic Blades: 3 Stainless Steel Feature: Kitchen Creative Tools Function: Shred A Wide Variety Of Fruit And Vegetables, As Well As Cheeses Accessories: Chopping / Mixing Blade, Shredding Disc, Slicing Disc Color: Green Size: 26 X 11.5 X 24 Cm Weight: 674g Piece Funnels 2 280.00 560.00 Stainless Steel Piston Funnel With Holder For Cream Sauce Dosing Funnel For Sauce Style: Silver Material: Stainless Steel Size: Shelf Height Is About 17cm, Handheld Funnel Height Is 20cm Piece Can Opener 5 340.00 1,700.00 Chef’s Classic Multi Can Opener Features: Durable And Easy To Clean. Material: Designed With High-grade Stainless Steel Size: 18/8 Stainless Steel Ergonomic Stainless-steel Handles Hygienic Design Ensures Easy Cleaning Of All Surfaces Piece Cast Iron Pots And Pans 1 8,250.00 8,250.00 Pots And Pans Set Cast Iron Cookware Non-stick Wok Pan 316 Stainless Steel Household Frying Pan With Gas-fired Induction Cooker Diameter: 28cm Metal Type: Stainless Steel Wok Type: Non-coating Pans Type: Chef’s Pans Material: Stainless Steel Type: Pans Pot Cover Type: Glass Cover Capacity: 4-5l Applicable Stove: General Use For Gas And Induction Cooker Feature: Eco-friendly Pot Cover: Glass Cover Pot Cover: Glass Cover Product Categories: Wok Application Of The Stove: General-purpose Material:316 Stainless Steel Characteristics: Non-stick Pan Item:316 Xue Ping Guo The Bottom Of A Pan Material: Composite Multi-layer Base Packaging: Carton The Lid Type: The Glass Cover Product Quality Grade: Accepts Style: European Piece Double Broiler Steamer 1 2,475.00 2,475.00 2 Layer Stainless Steel Steamer Pot Large Capacity Soup Pot With Double Boilers Stockpot Cookware Cooking Tools Feature: Eco-friendly Model Number: Stainless Steel Thicken 2 Layer Steamer Pot Layers: Double Type: Double Boilers Sheet Size: 28cm Material: Stainless Steel Specification: Name: Steamer Pot Material: Stainless Steel Size: Thickened Double Steamer Pot-28cm/11.02inch Packing List: Steamer Pot*1 Piece Food Thermometer 1 3,540.00 3,540.00 Weight: 80 G Dimensions: 218 X 34 X 20 Mm Operating Temperature: -20 To +50 °c Product-/housing Material: Abs Protection Class: Ip67 With Topsafe Product Colour: White Length Probe Shaft: 55 Mm Length Probe Shaft Tip: 17 Mm Diameter Probe Shaft: 3 Mm Diameter Probe Shaft Tip: 2.3 Mm Standards: En 13485 Battery Type: 3v Button Cell (cr 2032) Battery Life: 350 H Display Type: Lcd (liquid Crystal Display) Display Size: One-line Display Lighting: No Storage Temperature: -40 To +70 °c Temperature – Ntc Measuring Range: -50 To +275 °c Accuracy: ±1 % Of Mv (+100 To +275 °c) ±0.5 °c (-30 To +99.9 °c) ±1.0 °c (-50 To -30.1 °c) Resolution: 0.1 °c Reaction Time: T₉₉ = 10 S (measured In Moving Liquid) Measuring Rate: 0.5 S Piece Kitchen Knife Set 2 220.00 440.00 8 Pieces Kitchen Knife Set Chef Knives Fruit Stainless Steel Knife Sharpener Rod Peller Scissors Pairing Tools Specifications: Item Name: Kitchen Knife Set Main Material: 3cr13 Stainless Steel Quantity: 8pcs Note: Please Kindly Note That There Could Be A Few Deviations As The Result Of Manual Measurement. Thank You Package Information: Package Size: 31 * 28 * 2.5cm / 12.3 * 11.2 * 0.98in Package Weight: 700g Package List: 2 * Chef Knife 1 * Chopping Knife 1 * Knife Sharpener 2 * Fruit Knife 1 * Scissors 1 * Peeler Piece Meat Slicer 1 2,090.00 2,090.00 Description: Meat Slicer Material: The Frozen Meat Slicer Is Made Of High-quality Stainless Steel, Which Is Easy To Clean And Has A Long Service Life. It Helps To Cut Frozen Meat Into Various Uses, Including Making Hot Pot, Sukiyaki, Pizza Toppings, Sandwiches Or Ginger. It Can Effectively Avoid The Vibration And Noise Of The Electric Tool During The Working Process, It Is Simple To Operate And Easy To Clean. The Thickness Of The Meat Can Be Adjusted From 0.3mm To 8mm, Just Turn The Knob Slightly. Handle And Suction Cup: Even If There Is Oil On The Hand, It Will Not Slide. The Rubber Suction Cup At The Bottom Is More Suitable For Flat Desktops, And Ceramic Tiles, Glass And Metal Desktops Are Easier To Hold. Specification: Handle Length: 43.5/17.10inch Size (l X W): About 33x17cm / 12.96x6.69inch Blade Length: About 20cm Material: Stainless Steel Package Includes: 1x Vegetable Cutting Machine Piece Cookie Press 1 561.00 561.00 Decorative Tool Use, Press The Front End Of The Handle Button, Use The Above Operating Rod, The Extrusion Is Under Your Control. Features: 100% High Quality Type: Cookie Machine Material: Aluminum Alloy, Abs Plastic Size: Diameter:5.5cm,height:21cm Included: 1 X Cookie Machine 20 X Design Discs 4 X Icing Tips Set Cake Decorating 2 110.00 220.00 Color: Pink / Blue / White / Green Material: Silicone & Stainless Steel Cake Nozzle Size: Approx.1.8cm X 3.3cm Pastry Bag Size (length):approx.32cm X 17.5cm Material: Lfgb Food Grade Eva Material Purpose: Diy Necessary Utensils For Cake Cream Package Included: 24 X Cake Nozzles 1 X Pastry Bag 1 X Plastic Piping Converter Pieces Serving Tray 5 1,100.00 5,500.00 Rectangular Serving Tray/ Multi-purpose Utility Tray Non-skid Feature: Non-slip Material Heat Resistance Space Saving Wide Application Fine Workmanship Piece Steel Multipurpose Basket 1 3,689.00 3,689.00 Piece Weighing Scale 3 715.00 2,145.00 Manual Weighing Scale; 10kg.,stainless Small Bowl, Heavy Duty Set Measuring Cups Set 7 1,128.91 7,902.40 7 Pieces With A Convenient 1/8 Coffee Scoop; Complete Set Of 7with Pouring Lip, Sizes Include 1/8, 1/4, 1/3, 1/2, 2/3, 3/4 And 1 Cup, Food Grade Material Of Stainless Steel, Dishwasher Safe, Set Measuring Spoons 14 164.92 2,308.90 Sizes: 1/8tsp (0.63ml),1/4tsp (1.25ml),1/2tsp (2.5ml), 1 Tsp(5ml), 1/2tbsp (7.5ml),1 Tbsp (15ml), High Quality Stainless Steel, Dishwasher Safe Piece Measuring Urn 7 352.00 2,464.00 Glass,capacity: 100 Ml. (with 10 Ml Increments),metric And English System Of Measurement; With Handle And Spout, Clear, Non-porous, Tempered Glass Piece Mixing Bowl 11 251.90 2,770.90 Capacity:2.5l,high Quality,durable, Stain And Rust Resistant, Stainless Steel,diameter 22cm Piece Baking Sheet 25 211.50 5,287.43 13'x18', Tray Size 46x34cm, Aluminum Piece Wire Whisk 9 207.90 1,871.10 12inch, Heavy Duty, Stainless Steel, French Wire Piece Muffin Pan 60 57.68 3,461.04 12 Cups Muffin Bun Cupcake Bakewear Mold Material:carbon Steel With Non-stick Coating, Size:l:35cm X W:26cm X H:3.0cm Large Inner 7.0cm Piece Rubber Scraper 5 38.50 192.50 Big Size Silicone Rubber Spatula/scraper, Material:plastic+silicone Rubber, Size 24cm X 5cm Piece Hand Mixer 1 2,608.60 2,608.60 5-speed Selection,175w Power Consumption, 1.7m Power Cord, Weight: 1.08g., Dimensions:9.3cm X 19.5cm X 15.1cm, 220-240v Piece Revolving Cake Stand 3 600.00 1,800.00 Total: 2,631,530.02 2. Deped-division Of Sultan Kudarat, Through Its Bids And Awards Committee (bac), Now Invites Bids For The Above-mentioned Procurement Project. Prospective Bidders Must Have An Experience Of Having Completed At Least One (1) Contract That Is Similar To The Contract To Be Bid. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships/partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interests Or Outstanding Capital Stocks Belonging To Citizens Of The Philippines. 5. A Complete Set Of Bidding Documents May Be Acquired Or Purchased At Deped-division Of Sultan Kudarat Bac Secretariat, Located At National Hi-way Brgy, Kenram, Isulan, Sultan Kudarat Upon Accomplishing A Bidder’s Information Sheet And Payment In Cash Of A Non-refundable Fee By Interested Bidders In The Amount Of Five Thousand Pesos (php5,000.00) Per Lot To The Division Cashier. Only Bidders Who Purchased The Bidding Documents Will Be Allowed To Submit Bids (itb 6.8). It May Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Www.philgeps.net, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped- Division Of Sultan Kudarat Will Be Having The Following Procurement-related Activities. Activity Date & Time Venue Issuance Of Bidding Documents November 13–december 03, 2024 Division Office, National High-way,brgy Kenram, Isulan, Sul. Kudarat Pre-bid Conference November 21, 2024 (10:00 Am) Division Kalimudan Hall, Brgy. Kenram, Isulan Sultan Kudarat Submission And Opening Of Bids December 03, 2024 (10:00 Am) Division Kalimudan Hall, Brgy. Kenram, Isulan Sultan Kudarat 7. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website: Www.philgeps.net, For Them To Be Included In The Document Request List Of The Project. 8. Bids Must Be Delivered To The Address And On The Date And Time Stated Herein. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. A Valid Bid Securing Declaration Must Accompany The Bid(s) In Lieu Of The Bid Security. 9. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Opening Of Bids At The Address Stated Herein. Late Bids Shall Not Be Accepted. 10. Deped Division Of Sultan Kudarat Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Not Award The Contract(s), Or Annul The Bidding Process Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Melvin P. Fortuna Chairperson, Bac Secretariat Department Of Education Region Xii Division Of Sultan Kudarat Kenram,isulan, Sultan Kudarat Tel/fax # 064-471-1007 Meilrose B. Peralta, Edd Assistant Schools Division Superintendent Bac Chairperson

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center 1. The Local Government Unit Of Irosin, Through The Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 Intends To Apply The Sum Of Five Hundred Four Thousand Eight Hundred Eighty Pesos (p 504,880.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center, Good-41-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center Brief Description: 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l Approved Budget For The Contract : P 504,880.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Priveleges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 12, 2024, November 19, 2024 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Not Hold A Pre-bid Conference. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before November 19, 2024, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 19, 2024, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Fritzie Riva L. Michelena Mdrrmo Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Issue: November 12, 2024 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Information Technology And Supplies For Disaster Risk Reduction Emergency Operations Center, With Project Identification Number Good-41-2024. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Nutribun, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 As Indicated Below For In The Amount Of Five Hundred Four Thousand Eight Hundred Eighty Pesos (p 504,880.00). 2.2. The Source Of Funding Is: Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Not Hold A Pre-bid Conference For This Project. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Operations Center Brief Description: 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Information Technology And Supplies 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three(3) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Three(3) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Applicable Provided That Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Information Technology Equipment And Supplies If It Follows The Technical Specification Set By The End-user Units. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Desktop All-in-one 2unit 2 External Harddrive 3pcs 3 Usb Flashddrive 4pcs 4 Laptop 1 Pc 5 Ups 5unit 6 Printer 1pc 7 Aircon 1unit 8 4 Drawer Vertical Cabinet 3pcs 9 Reclining Executive Chair 1pc 10 Electric Stand Fan 3pcs 11 Industrial Fan 3 Pcs 12 Heavy Duty Industrial Mobile Fan 2pcs 13 Magnetic Whiteboard With Stand 1pc 14 Whiteboard 3pcs 15 Storage Box 10pcs Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Desktop All-in-one 2 External Harddrive 3 Usb Flashdrive 4 Laptop 5 Ups 6 Printer 7 Aircon 8 4 Drawer Vertical Cabinet 9 Reclining Executive Chair 10 Electric Stand Fan 11 Industrial Fan 12 Heavy Duty Industrial Mobile Fan 13 Magnetic Whiteboard With Stand 14 Whiteboard 15 Storage Box Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Lorenzo G. Ubalde Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor Technical Specifications Item No. Item Statement Of Compliance (comply/not Comply) Prepared By: ______________ Proprietor

Details: Description Republic Of The Philippines Bids And Awards Committee City Of Dapitan November 07, 2024 Invitation To Bid The City Government Of Dapitan, Through Its Bids And Awards Committee (bac), Invites Interested Parties To Apply For Eligibility And If Found Eligible To Bid For The Following Contract: Contract Id: Pr# 2024-10-28-515, 516, 517, 518, 519, 520, 521, 522, 523, 524, 525 & 526 Contract Name: Procurement Of Vehicle Parts & Accessories Purpose: For Official Use In The Motorpool Division, City Engineering Office, This City Approved Budget For The Contract (abc): Php 3,434,485.00 (inclusive Of All Applicable Taxes) Source Of Fund: General Fund • Prospective Bidders Should Have Expertise In Undertaking A Similar Project Within The Last Three (3) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. • Bidders / Contractor’s Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents. • Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates. • The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post Qualification Of The Lowest/single Calculated Bid Shall Be Conducted. • All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr). The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting November 08 – 15, 2024 Availability And Issuance Of Bidding Documents Nov. 08 – Dec. 03, 2024; 1:30 P.m. Pre-bid Conference November 19, 2024; 2:00 P.m Deadline For The Submission Of Bids December 03, 2024; 1:30 P.m Bid Evaluation December 03, 2024; 2:00 P.m • Philippine Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The City Of Dapitan. (bacdapitan@gmail.com) • Payment For The Philippine Bidding Documents Is A Non – Refundable Amount Of Five Thousand Pesos Only (php 5,000.00) Payable To The Office Of The City Treasurer, Dapitan City. The City Government Of Dapitan Assumes No Responsibility Whatsoever Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. The City Government Of Dapitan Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Rejects All Bids At Any Time Prior To Award Of Contract, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. Sgd.engr. Renmar Terenz E. Draper Cgdh I, Management Information Systems Office Bac Chairman Annex A: Pr# 2024-10-28-515 - P470,170.00 1. 10 Gals Diesel Engine Oil 2. 10 Liters Gear Oil 10 3. 15 Bots Spray Paint Black (oil) 4. 2 Pcs Cross Bearing 555 5. 1 Set Wiper Blade Isuzu Elf Green 6. 4 Liters Brake Fluid 7. 1 Set Industrial Glove 8. 2 Gals Radiator Coolant 9. 1 Set Brake Shoe Isuzu Elf Dropside 10. 1 Set Release Bearing 555 11. 1 Pc Clutch Disc Garbage Compactor 12. 1 Set Brake Pad Mini Bus Coaster 13. 1 Pc Oil Filter Coaster 14. 1 Pc Grease Nipple 15. 1 Pc Oil Filter Dumptruck 16. 1 Set Brake Shoe Raptor 17. 10 Pcs Contact Cleaner 18. 1 Tank Acetylene 19. 1 Tank Industrial Oxygen 20. 1 Pc Grease Gun Hose 21. 1 Pc Oil Filter Shackman Dumptruck 22. 1 Pc Fuel Filter Shackman 23. 2 Pcs Fes- 5640 24. 24 Liters Top 1 Coolant 25. 2 Pcs Wheel Cylinder 26. 5 Pcs Oil Filter (unit3) Ambulance Cdrrmo 27. 1 Pc Center Bearing 28. 8 Pcs Rubber Bushing 29. 1 Pc Isoyo Bearing 30. 1 Pc Labor/replace Bearing 31. 1 Pail Gear Oil 140 32. 1 Box Welding Rod 33. 1 Pc Fuel Filter 34. 1 Set Brake Pad 35. 4 Pcs Battery 21 Plates 36. 5 Pcs Battery 11 Plates 37. 6 Pcs Battery 7 Plates 38. 8 Pcs Tires 195 R14 39. 2 Pcs Tires 7.00 – 16 40. 8 Pcs Tires 6.40 – 6.50 41. 1 Unit Labor & Maintenance 42. 24 Liters Gasoline Engine Oil 43. 1 Pc Starter Rewind / Labor 44. 5 Pcs Oil Filter C- 034 45. 2 Pcs Tires 185 R 14 Pr# 2024-10-28-516 - P552,810.00 1. 9 Gals Diesel Engine Oil 2. 10 Liters Cyclone 2t 3. 39 Liters Havoline Gasoline Oil 4. 4 Liters 1l Brake Fluid Preston 5. 16 Pcs Battery 11 Plates 6. 9 Pails Cyclone Hydraulic Oil 10 7. 1 Pc Battery 17 Plates 8. 1 Pail Volga Grease 9. 1 Pail Oil 90 10. 1 Pail Oil 140 11. 1 Pail Oil 40 12. 12 Gals Top 1 Coolant 13. 6 Gals Transmission Fluid 14. 1 Pc Oil Filter Vic – Hilux 15. 1 Set Brake Pad Mit. Strada 16. 4 Gals Diesel Oil Caltex 17. 1 Pc Oil Filter Vic- Fortuner 18. 1 Pc Fuel Bosch – Hilux 19. 1 Pc Tire Blade 20. 1 Pc Oil Filter Vic – Montero 21. 1 Pc Contact Cleaner 22. 2 Pcs Tires 265/70r17 – Montero 23. 4 Pcs Tires 265/ 65r17 – Fortuner 24. 4 Pcs Tires 285/ 70r17 – Raptor 25. 1 Set Wheel Alignment – Fortuner 26. 1 Pc Amaron Battery – Raptor (# Of Plates) 11 27. 3 Vehicle Wheel Alignment/ Balance – Cdrrmo/ A. 28. 1 Set Crimping Hydraulic Hose – Loader 29. 4 Pcs Tires 265/ 60r18 – Fortuner 30. 2 Pcs Oil Filter Vic – Traviz 31. 4 Pcs Tires 265/ 65r17 Pr# 2024-10-28-517 - P201,140.00 1. 1 Pc Oil Filter B-38 2. 1 Pc Oil Filter A- 47 3. 2 Pcs Wiper Arm Toyota Hi- Ace 4. 2 Pcs Wiper Blade Toyota Hi- Ace 5. 1 Pc Tire Gauge 6. 1 Pc Feeler Gauge 7. 2 Pails Hydraulic Oil 40 8. 3 Pcs Tire/ Tire Tube 4x8 9. 5 Liters Brake Fluid 10. 10 Rolls Electrical Tape 11. 3 Pcs Epoxy 12. 1 Set Cable Tie 13. 3 Pcs Oil Filter C- 111 14. 1 Pc Oil Filter C- 034 15. 1 Pc Clutch Operating Assy. Crosswind 16. 1 Pc Pressure Plate – Montero 17. 1 Pc Grinding Compound 18. 1 Pc Alternator Pulley 19. 1 Pc Cylinder Head Reface 20. 1 Unit Radiator Overhauled & Repair 21. 1 Unit Aircon Repair And Maintenance – Van 22. 1 Pc Hydraulic Hose Crimping ¾ 4w 2.5 Ft. 23. 6 Pcs W8dc Sparkplug Bosch 24. 2 Pcs Battery 11 Plates 25. 5 Pcs Sand Paper #30 26. 5 Pcs Sand Paper # 800 27. 1 Pc Quick Metal Sealant 28. 1 Unit Aircon Repair And Maintenance – Crosswind 29. 1 Unit Aircon Repair And Maintenance – Navara 30. 1 Pc Generator – Avr – City Hall 31. 1 Pc Generator – Water Temp. Switch W/ Senseor – City Hall Pr# 2024- 10-28-518 - P308,310.00 1. 1 Pc Alternator Repair Toyota Pnp 2. 4 Pails Oil 40 3. 1 Pc Pullyhernatorpully Hilux 4. 1 Pc Bearing Hilux Toyota 5. 1 Pc Brush Holder 6. 3 Pcs Solenoid Switch 7. 1 Set Horn 24v 8. 1 Pc Cylinder Head Gasket 9. 10 Pcs Nylon Tie 10. 1 Pc Fuel Pump Assy. 4k 11. 8 Pcs Glowplug– Bongo 12. 1 Pc Alternator Pully – Navara 13. 5 Pcs Hub Bolt 14. 5 Pcs Hub Nut 15. 1 Set Overhauling Gasket Ford Ranger Black 16. 1 Pc Turn Buckle ¾ 17. 1 Pc Relay 18. 1 Pc Push Button Switch 19. 1 Set Brake Pad – Ford Raptor 20. 1 Unit Toyota Hilux Repair & Maintenance 21. 2 Sets Stud Bolt And Nut 22. 8 Pcs Tires 265/ 60r18 A/t 23. 6 Pcs Tires 225/ 70r15 24. 10 Pcs Tires 7.00 – 16 12pr R18 25. 6 Pcs Tires 165r13 Sl305 Pr# 2024-10-28-519 - P360,170.00 1. 2 Tank Industrial Oxygen 2. 1 Unit Repair & Maintenance Raptor – Admin 3. 1 Unit Repair & Maintenance Raptor – Cmo 4. 4 Pcs Tires 285/ 70r17 – Raptor Admin 5. 1 Pail Atlantic Grease 6. 1 Box Nihon Welding Rod N – 6012 7. 1 Pc Fabricate Hydraulic Hose 36/24 8. 4 Pcs Tires 265/ 60r18 9. 132 Liters Gasoline Engine Oil 10. 12 Pails Diesel Engine Oil 11. 2 Pcs Battery N70 12. 24 Liters 2t Cyclon Oil 13. 2 Pcs Pump Assembly Ranger 14. 2 Pcs Wheel Cylinder 15. 2 Pcs Gasket Hilux Pnp 16. 1 Set Sparkplug Cable 17. 1 Set Tie Rod End Crosswind 18. 1 Pc Clutch Disc Travis 19. 1 Pc Release Bearing 20. 1 Pc Release Bearing F6a 21. 1 Liter Brake Fluid 22. 2 Gals Coolant 23. 1 Pc Engine Support 1 Mb- 581845 24. 1 Pc Oil Filter C- 306 25. 1 Pc Oil Filter C-111 26. 10 Ft Fuel Hose 6/16 27. 1 Pc Gws- 19a Water Pump 28. 1 Pc Fabricate Hydraulic Hose 42/28 Pr# 2024-10-28-520 - P143,000.00 1. 1 Unit Labor & Materials – Xpander 2. 1 Set Brake Pad – Xpander 3. 1 Set Brake Shoe – Xpander 4. 4 Pcs Brake Springs – Xpander 5. 1 Unit Labor & Materials – Raptor 6. 1 Unit Labor & Materials – Montero 7. 2 Pails Oil Diesel Engine 8. 1 Unit Battery 11 Plates 9. 3 Unit Battry 9 Plates 10. 1 Set Brake Pad - Strada 11. 1 Pc Wd40 12. 1 Pc Contact Cleaner 13. 1 Pail Gasoline Oil 14. 1 Unit Labor & Materials 15. 1 Unit Wheel Allignment / Replace Tires Pr# 2024-10-28-521 - P278,400.00 1. 10 Pcs Tires 10.00 – 20 16pr Mix – Lug 2. 12 Pcs Tires 7.00 -16 12pr Mix- Lug 3. 6 Pcs Tires 185r14 8pr Pr# 2024-10-28-522 - P198,670.00 1. 1 Set Rotor Disc Repace – Raptor Admin 2. 10 Ft Steel Tube #16 3. 1 Pc Sparkplug 4. 1 Tank Industrial Oxygen 5. 2 Tanks Industrial Acytelene 6. 1 Set Spraket, Chain & Engine Spraket – Xr150 7. 1 Set Gasket 4jg2 01h 8. 2 Sets Brake Drum – Expander 9. 6 Pcs Brake Chamber Ub035 10. 5 Pcs Truck Tire Rubber Nbr – 70 11. 2 Pcs Coil Spring – Montero 12. 1 Pc Center Bearing –fortuner 13. 1 Unit Repair & Maintenance & Materials – Raptor 14. 1 Unit Aircon Repair Maintenance & Materials – M&s 15. 1 Unit Aircon Repair Maintenance & Materials - Ranger 16. 1 Unit Aircon Repair Maintenance & Materials - Travis 17. 1 Unit Aircon Repair Maintenance & Materials – Hilux Pr# 2024-10-28-523 P280,330.00 1. 1 Unit Toyota Hilux Labor Service & Maintenance 2. 1 Pc Remote Replacement & Programming- Raptor/ Mayor 3. 1 Unit Ford Raptor Labor Services & Maintenance – Admin 4. 1 Unit Ford Raptor Labor Services & Maintenance – Mayor Pr# 2024-10-28-524 - P206,740.00 1. 1 Pc Auxiliary Fan 2. 1 Pc Evaporator Aircon D-max 3. 1 Can Sp10 Compressor Oil 4. 1 Klsfreon 134a Solfron 5. 1 Pc Air Filter – 140266-0 6. 5 Pcs Fuel Filter Ud Truck 7. 4 Pcs Oil Filter Ud 8. 10 Meters Chemical Hose 9. 1 Gals Top 1 Coolant 10. 1 Pc Oil Filter D-max 11. 9 Pcs Backrest Single 12. 1 Pc Turbo Hose 13. 10 Sets Battery Terminal 14. 5 Kgs Welding Rod 15. 10 Pcs Wd40 16. 24 Liters Apex Gasoline Engine Oil 17. 5 Pcs Backrest Double 18. 4 Pcs Glowplug 19. 1 Pc Oil Filter Vic 20. 5 Pcs Oil Filter C – 114 21. 1 Pail Diesel Engine Oil 22. 3 Pcs Tire Tube – 4.00x8 23. 5 Pcs Oil Filter – Ud Truck 24. 2 Pcs Fan Belt – Isuzu Elf 25. 24 Liters Gasoline Oil 26. 1 Pc Clutch Lining – Isuzu Elf 27. 1 Pc Release Bearing 28. 1 Pc Brass Holder 29. 2 Pcs Shock Absorber 30. 1 Set Industrial Gloves 31. 1 Set Cable Tie Lock 32. 1 Pc Oil Filter Vic 33. 1 Pc Oil Seal 34. 1 Pc Break Cleaner 35. 1 Pc Throttle Cleaner 36. 1 Pc Oil Filter 37. 4 Pcs Hose Clamp 38. 24 Liters Automatic Transmission Fluid 39. 4 Sets Battery Terminal Bronze 40. 1 Set Brake Disk Pad Db1841 41. 1 Pc Oil Filter C- 207 Bosch 42. 1 Pc Tubo Hose Pr# 2024-10-28-525 - P219,925.00 1. 4 Pcs Battery 21 Plates 2. 5 Pcs Battery 11 Plates 3. 12 Pcs Lug Nut Suv 4. 2 Pcs Distributor Cap – Multicab 5. 6 Pcs Sparkplug 6. 1 Set Carborator Replacement Kit – Multicab 7. 1 Set Brake Pad – Navara 8. 4 Pcs Bearing 9. 8 Pcs Rubber Cap – Hilux 10. 1 Pc Clutch Slave – Dropside Isuzu Elf 11. 10 Pcs Sand Paper 12. 1 Pc Gas Tank Cap – Dumptruck 13. 12 Liters Brake Fluid 14. 4 Pcs Tie Rod End 15. 2 Pcs Ball Joint – 555 Upper 16. 2 Pcs Ball Joint – 555 Lower 17. 1 Pc Gas Cable – Multicab 18. 1 Pc Hand Brake Cable – Ford Ranger 19. 3 Pcs Oil Filter Vic – Xpander 20. 2 Pcs Adjuster 21. 1 Pc Oil Filter 30207 22. 1 Pc Fuel Filter 30210 23. 12 Pcs Lug Nut Stainless 24. 1 Pc Oil Filter Vic 25. 1 Pc Oil Filter 26. 1 Pc Clip Slave 27. 1 Pc Clip Hose 28. 1 Pc Wd40 29. 1 Pc Fuel Filter Vic 30. 1 Ft Fuel Hose 31. 1 Pc Fuel Pump 32. 2 Pcs Hose Clamp 33. 185 Pcs Tire Patch 34. 8 Pcs Rubber Cap 11/16 35. 1 Set Head Light Bulb 36. 2 Btls Brake Cleaner 37. 12 Pcs Battery Terminal 38. 2 Pcs Shock Absorber 39. 8 Pcs Oil Seal 40. 2 Pcs Oil Filter 41. 5 Pcs Gasket All Pr# 2024-10-28-526 - P214,280.00 1. 180 Liters Diesel Engine Oil 2. 4 Pails Gear Oil 10 3. 2 Pails Hydraulic Oil 4. 1 Unit Car Aircon Repair And Maintenance – Raptor 5. 2 Pcs Tires 185 R14 6. 1 Unit Alternator Repair – Ranger 7. 4 Pcs Truck Bolt And Nut Set 8. 8 Pcs Tires 185/ 65 R15 9. 1 Set Brake Pad 10. 8 Pcs Rubber Cup 11. 4 Pcs Brake Shoe Bondng – Isuzu Elf 12. 1 Set Battery Terminal Bolt And Nut Truck 13. 2 Set Brake Pad – Toyota Hi-ace 14. 1 Set Stud Bolt And Nut 15. 1 Pc Oil Filter – Shackman 16. 2 Set Suspension Arm – Navara 17. 2 Set The Rod End – Isuzu Crosswind 18. 4 Pcs Wheel Cylinder Assy - Coaster 19. 2 Pcs Gasket All 20. 4 Pcs Gasket Maker 21. 4 Liters Brake Fluid 22. 4 Pcs Oil Filter – 034 23. 1 Set Brake Pad 24. 6 Pcs Rubber Cup ¼ 25. 3 Bolts Wd40 26. 10 Rolls Electrical Tape 27. 2 Set Wiper Blade #16

Details: Krakow, 14/11/2024 Price Request No. Ag.b.0162.1.2024.261.ts "replacement of an external window in the Police Station building in Gródek nad Dunajcem" The procedure is conducted on the basis of Art. 2 Section 1 Point 1 of the Act of 11 September 2019, as amended - Public Procurement Law - hereinafter referred to as the Act, and in accordance with Decision No. 58/2021 of the Provincial Police Commander in Krakow General Information The offer should be sent by: 18/11/2024, 12:00 p.m. Please submit offers and any inquiries by 18.11.2024, 12:00 PM via the Purchasing Platform at: https://malopolska-policja.eb2b.com.pl, "proceedings" tab À "list of open proceedings". In the event of problems with submitting an offer, please contact the Eb2b Helpdesk Department - Contact in the footer of the website. The offer should be prepared in accordance with this inquiry. 1. Description of the Subject of the Order: The Subject of the Order is - Replacement of 1 PVC Window with Dimensions of Approx. 130 X 170 Cm., Single-leaf - with a Heat Transfer Coefficient for the Entire Window (Glass + Frame and PVC Frame Construction) Uw = 0.9 Works to be Performed: - Dismantling of the Existing Window, - Installing a 130 X 170 Cm PVC Window, with Uw Coefficient = 0.9 for the Entire Window (Glass, Frames, Jambs) - Making External and Internal Linings, - Making Muntins on the Glass (Division into 6 Fields) - Painting the Walls and Ceilings of the Staircase with Emulsion Paint Possibility of On-Site Inspection After Arranging an Appointment by Phone at 665 390 452, 47 83 54 904, Or 602 810 551. The given dimensions of the window constitute an indicative scope of works. Before the window is made, the bidder should update the measurements during an on-site inspection. 2. Conditions concerning the offer and execution of the order: 1. Required guarantee for the work performed - 36 months. 2. Payment will be made within 30 days from the date of receipt of a correctly issued invoice - by transfer to the account indicated by the contractor. Deadline for execution of the order: Until December 2, 2024. Place of execution of the order: Police station in Gródek nad Dunajcem 57. Criteria for examination, evaluation and selection of offers: The most favorable price for execution of the order. Attachments: 1. Offer template 2. Bill of quantities (indicative)

Details: Collection Center The shelf systems The services associated with them are acquired by the Finnish Museum Agency’s Collection and Conservation Centre (experience) Vantaa during the years 2016 and 2020 as part of Koke’s Construction Conltaing Con.s as part of a diverse shelf system from two different suppliers. The shelf systems are being updated and acquired new shelf systems to replace some of the old shelf systems and to complement the old shelf systems. The shelf systems are required for the preservation of the collections of the Finnish National Museum/Finnish National Museum and the Collections of the Finnish Museum Agency. Acquire the full structure of the Shelter Planning, Implementation and Installation. Parts of the whole can be deposited inside the dynamic purchasing system, either in one or separately. As part of the Purchase Entity Orders New Hydrogen Planning Services from a Dynamic Supplier Staed to a Dynamic Procurement System, the Supplier must implement the plans so that the design does not include Exclusive Elements or Other Restrictions, which would prevent other Dynamic Procurement System Accredited Operators from offering the Planned Model System. Providers are always reserved in the context of the Dynamic Procurement System’s In. Deposits, with the publicity to get to know the premises before leaving the Offer. Offers from the shelf systems are always delivered, Installation supplies removed and Hylly systems must be provided with a 5-year warranty. Defin. of active installation methods shall include Rastin and Device Costs. Suppliers have the option to use the Trucks and Nostim on the item if they are free of any other use. Hydrogen systems are implemented in self-managed farms, in which conditions vary from -25 to 20c and Osaidity by 25 to 55%. The shelf systems are mainly metal frames, but can contain as wood, plastic as canngas, e.g. shelf materials or attachment systems. The Provider shall also, if necessary, ensure from the User what materials and surface mediators in Salita.uctures. Ma.ls should be such that they are not harmful to museum objects, and not harmful gases for museum objects. The shelves are designed and calculated according to the preservative structure. The whole ranges from the size of the Nuppineula Esin Koko over 15m3 to the sized driving tools and boats. Collections Includes: - Sea Museum Collections: Venite, Engine and Technical Devices - Archaeological Collections: From Keramika to Swords Art Collections: Oil Painting, Graphics and Veistoks - Cultural Historical Collections: From Horses to Rysy Photography: Negatives and Vedics Archives. The Procurement is Related to A Project and/or By Byd by European Union Funds

Details: Description Item No. Item Description Qty. Unit Unit Price Total Price Light Vehicles - 824,165.00 1 Grinding Compound 63mmx52mm 3 Pcs 2 Transmission Oil Seal 6x55x145mm 1 Pc. 3 Center Bolt 12mmx18" 2 Pcs 4 Rubber Gloves 5"x7" 10 Pairs 5 Water Pump Assy. F6a 110mmx95mm 1 Set 6 Timing Belt 2kd 1"x4ft. 1 Pc. 7 U Bolt W/nut 10mmx150mm 4 Pcs 8 Startic Relay 70mmx45mm 1 Pc. 9 Caliper Assy. 5"x7" 1 Pc. 10 Coupe Repair Kit 10mmx12mm 1 Set 11 Brake Pad Relining 100mmx38mm 10 Pcs. 12 Bolt 12x810 10 Pcs 13 Auto Bulb 24v. S.c. 20 Pcs 14 Tubeless Valve 8mmx20mm 10 Pcs. 15 Exhaust Manifold Gasket F6a 55mmx300mm 2 Pcs 16 Scrum Solenoid Switch 2 Pcs 17 Clutch Disc Hilux 10"x2" 1 Pc 18 Tensioner Bearing F6a 1 Pc 19 Timing Belt F6a 113t 1 Pc 20 Fuel Pump 100mmx60mm 4 Pcs 21 Engine Sprocket 15t 4 Pcs 22 Wheel Sprocket 42t 4 Pcs 23 Chain 428 4 Pcs 24 Hand Brake Repair Kit 13/16"x12mm 1 Set 25 Signal Light 12v. 4 Pcs 26 Motorcycle Seat Cover 24"x 24" 2 Pcs 27 Cdi 150 12v. 2 Pcs 28 Headlight Assy. 12v. 2 Pcs 29 Clutch Lever Handle 7mmx6cm 2 Pcs 30 Spark Plug 75mmx12mm 4 Pcs 31 Caliper Assy. 90mmx60mm 1 Set 32 Foor Brake Switch 40mmx80mm 2 Pcs 33 Hand Brake Repair Kit 50mmx40mm 2 Pcs 34 Copper Gasket Std 5 Pcs. 35 Primer 100mmx40mm 1 Pc. 36 Bolt W/nut 10mm 20 Pcs 37 Bearing 32005 4 Pcs 38 Timing Belt D4d 1 Pc 39 Ignition Switch 25mmx80mm 1 Pc 40 Rubber Cup 13116 20 Pcs 41 Rubber Cup Sc4518 20 Pcs 42 Center Bolt 12x6 2 Pcs 43 U. Bolt W/ Nut 3x15 4 Pcs 44 U. Bolt W/nut 3x6 4 Pcs 45 Hub Bolt Elf Lh 20mmx114mm 5 Pcs 46 Low Arm Assy. 25mmx370mm 4 Pcs 47 Battery Mf 4l 12v 2 Pcs 48 Ball Mirror (canter) 8" 1 Pc 49 Valve Seal 6mmx10mm 1 Set 50 Piston Ring Std 2 Sets 51 Center Post Assy. 73mmx34mm 1 Pc 52 Gasket Kit Std 1 Pack 53 Oil Seal 4mmx12mm 1 Pc. 54 Feed Pump 14mmx84mm 1 Pc. 55 Overhauling And Calibration Of Injection Pump 2 Kits 56 Regulating Valve Std 1 Pc 57 Governor Std 1 Pc 58 Shafting Std 1 Pc 59 Gasket Kit Std 1 Set 60 Check Valve Std 4 Pcs 61 Piston Std 1 Pc 62 Spindle Std 1 Pc 63 Roppex Gasket Std 5 Pcs 64 Feed Pump Oil Seal 4mmx12mm 1 Pc 65 Primer 83mmx15mm 1 Pc 66 Injector Assy 90mmx18mm 10 Pcs 67 Rubber Cup Sc 80563 20 Pcs 68 Cylinder Head Assy. 1 Pc 69 Water Hose 1"x3m 1 Pc 70 Timing Belt 113t 1 Pc 71 Tensioner Bearing 52mmx24mm 1 Pc 72 Bolt 18mmx16" 12 Pcs 73 Cross Wrench 17" 19" 21" 23" 2 Pcs 74 Duct Tape 2"x5m 2 Pcs. 75 Starter Assy. F6a 130mmx200mm 1 Pc 76 Scrum Speedometer Cable 8mmx3m 2 Pcs. 77 Acrylic Primer Surfacer Gray 1 Ltrs. 78 Acrylic Thinner 4ltrs./gal. 1 Gals. 79 Assorted Sand Paper 280mmx230mm 40 Pcs. 80 Air Chuck 8mmx50mm 2 Pcs 81 Electrical Tape 1"x5m 20 Pcs 82 Radiator Coolant 4 Ltrs/gal. 8 Gals. 83 Drum Pump 200mmx100mm 1 Pcs 84 Rags 1000pcs/sack 1 Sack 85 Battery Clamp 26mmx50mm 20 Pcs 86 Battery Solutions 15 Btls. 87 Silicon Gasket Small 80g. 10 Pcs 88 Fully Synthetic Engine Oil 4 Litrs./gal. 12 Gals. 89 Low Arm Assy.f6a 37cmx10cm 2 Pcs 90 King Pin Kit Canter 186mmx30mm 1 Set 91 Pitman Arm F6a 80mmx140mm 2 Pcs. 92 Alternator Hose 10mmx85mm 1 Pc. 93 Fan Belt 3cmx145cm 2 Pcs 94 Blinker Light 200mmx160mm 2 Pcs 95 Low Arm Bushing 55mmx27mm 10 Pcs 96 Auto Bulb 12v. S.c 45mmx25mm 20 Pcs. 97 Ignition Switch 55mmx82mm 1 Pc. 98 Lower Arm Assy 37cmx10cm 2 Pcs. 99 U-bolt 12mmx100mmx200mm 4 Pcs. 100 Rubber Dumper 153mmx100mm 2 Pcs. 101 Compressor Hose 10mmx83m 83 Ft. 102 Carwash Hose 10mm 25 Meters 103 Brake Fluid 1000ml. 34 Ltrs. 104 Steering Wheel Cover 12" 1 Pc. 105 Hi-tension Wire 7mmx18" 1 Set 106 Carburator Repair Kit 100mmx72mm 2 Sets 107 Brake Pad Bonding 110mmx35mm 8 Pcs 108 Coolant 4ltrs./gal. 5 Gals. 109 Siren 200mmx330mm 1 Pc. 110 Tie Rod End 18mmx90mm 2 Pcs. 111 Oil Filter 68mmx75mm 1 Set 112 Autowire # 16 5 Rolls 113 Wheel Cylinder 1 1/8" 2 Pcs 114 Ignition Switch Assy. 1 Pc 115 Front Caliber Brake Assy. 40mmx20mm 2 Pcs 116 Rotor Disc. 8"x10" 1 Pc. 117 Ignition Switch 100x155 6"x4" 1 Pc. 118 Flashing Relay 60mmx35mm 3 Pcs. 119 Led Light 24v. 2 Pcs 120 Multigrade Engine Oil 4ltrs/gal. 4 Gals. 121 Fuji Welding Rod 6012 #18 1 Box 122 Clutch Disc. Assy. 8"x5" 1 Pc. 123 Overhauling Gasket F6a 1 Set 124 Piston Ring F6a 0.25 1 Set 125 Conrod Bearing F6a Std 2 Sets 126 Main Bearing F6a Std 1 Set 127 Thrush Washer F6a Std 1 Set 128 Pilot Bearing 15mmx85mm 1 Pc 129 Rubber Cup 1 1/8 20 Pcs 130 Hub Bolt (multicab) 12mmx45mm 20 Pcs 131 Damper Belt 13-27 2 Pcs 132 Oil Filter C.111 76mmx74mm 7 Pcs 133 Rotor Disc. Assy. (canter) 8" 4 Pc. 134 Spark Plug (multicab) 75mmx12mm 9 Pcs 135 Alternator Assy. (hilux) 12"x14" 1 Unit 136 Polyribbed Belt 1 Pc 137 Timing Belt 97mmx10mm 1 Pc 138 Clutch Master Repair Kit 7/8"x10" 2 Sets 139 Cylinder Head Gasket 260mmx140mm 1 Pc 140 Padlock 11mmx17mm 2 Pcs 141 Power Window Switch 17mmx29mm 15 Pcs 142 Pump Assy. 120mmx30mm 1 Set 143 Solenoid Switch (canter) 24v. 2 Pcs 144 Toggle Switch 17mmx29mm 5 Pcs 145 Conrod Bearing Std 1 Set 146 Bolt W/ Nut 8x14 20 Pcs 147 Accelerator Cable F6a 10 Pcs 148 Accelerator Cable 4d35 2 Pcs 149 Wiper Blade 16" 6 Pcs 150 Horn Circuit 12v. 1 Pc 151 Socket Relay 35mmx26mm 5 Pcs 152 Combination Switch 32mmx26mm 1 Pc 153 Radiator Hose 1"x8" 1 Pc 154 Clutch Master Kit 9/8 2 Sets 155 Halogen Bulb "4 4 Pcs. 156 Halogen Bulb 3" 3 Pcs. 157 Wiper Blade 16" 4 Pcs 158 Priming Pump 35mmx35mm 2 Pcs 159 Transmission Support 4"x2" 6 Pcs 160 Engine Support 2"x4" 4 Pcs 161 Bosh Relay 12v. 5 Pcs 162 Fan Belt 9.5x650 3 Pcs 163 Oil Filter C.110 5 Pcs 164 Wire #16 2 Sets 165 Welding Rod 6012 1 Box 166 Air Cleaner F6a 4 Pcs 167 Window Lock 12mmx20mm 4 Pcs 168 Alternator Pulley 19mmx32mm 1 Pc 169 Wd 40 33.3ml 5 Pcs 170 Clutch Cable F6a 3mx2m 2 Pcs 171 Clutch Lining (hilux) 10"x6" 1 Pc. 172 Gum 4"x24" 1 Pc 173 Central Bearing Cushion 150mmx130mm 1 Pc. 174 Tail Light Round 12v. 4 Pcs 175 Tail Light 12x110mmx300mm 2 Pcs. 176 Rubber Cap 1 1/8 10 Pcs 177 Clearance Light 12v. 2 Pcs. 178 Transmission Oil Seal 55mmx64mm 1 Pc. 179 Schock Absorber 450mmx40mm 2 Pcs 180 Bushing 35mmx40mm 2 Pcs 181 Crankshaft Assy. Full 350mmx35mm 1 Pc. 182 Steel Brush 240mmx25mm 5 Pcs. 183 Oil Filter C.526 2 Pcs. 184 Oil Filter C.313 3 Pcs. 185 Oil Filter Jcf351 1 Pc. 186 Engine Oil 4ltrs./gal 5 Gals. 187 Silicon Gasket 85grms 5 Pcs 188 Auto Wire #16 4 Rolls 189 Wiper Blade 22" 2 Sets 190 Conrod Bearing Std 1 Set 191 Crankshaft Bearing Std 1 Set 192 Thrush Washer Std 1 Set 193 Belt Tensioner 65mmx35mm 1 Pc 194 Tire Flap #16 X700 5 Pcs 195 Inner Tube 750x16 3 Pcs 196 Overhauling Gasket F6a 1 Set 197 Axle Lock Bearing C06 1 Pc 198 Axle Bearing 35mmx65mm 1 Pc 199 Clutch Secondary Assy. 7/8 2 Sets 200 Clutch Secondary Kit 7/8 2 Sets 201 Halogen Bulb Hb3 4 Pcs 202 Timing Belt 113t 1 Pc 203 Spark Plug F6a 9 Pcs. 204 Dumper F6a 30mmx15mm 4 Pcs 205 Leaf Spring #1 2"x98" 2 Pcs 206 Leaf Spring #2 2"x96" 2 Pcs 207 Wd 40 Small 30z. 5 Pcs 208 Rotor Disc. 8" 2 Pcs 209 Relay Socket 32mmx29mm 10 Pcs 210 Tip Loam 3/4" X 10mm 5 Pcs 211 Clutch Lining 10" 1 Pc 212 Brake Disc Pad For Multicab 5mmx7mm 2 Sets 213 Power Window Socket 27mmx17mm 10 Pcs 214 Rubber Cup For Multicab 3/4" 8 Pcs 215 Battery Log 2mmx12mm 10 Pcs 216 Fuel Filter F6a Jc-170 5 Pcs 217 Oil Filter Jc351 5 Pcs 218 Lower Pad Hose F6a 1"x12" 2 Pcs 219 Alternator Bearing 1 Pc 220 Fan Belt 3.5 X 1075 2 Pcs 221 Belt 4pk.1110 1 Pc 222 Fan Belt 95x650 4 Pcs 223 Toggle Switch Single 27mmx17mm 10 Pcs 224 Oil Filter C503 5 Pcs 225 Rod Bronze 4mmx750mm 5 Pcs 226 Three Bond Gasket 80grams 5 Pcs 227 Blinker With Megaphone 50mmx8"12v. 2 Pcs 228 Rubber Cup 030-81373 10 Pcs 229 Clutch Booster Assy. 230mmx190mm 1 Pc 230 Clutch Lining 18" 1 Pc 231 Timing Belt F6a 113t 3 Pcs 232 Clutch Relining 22" 1 Pc 233 Brake Disc Pad Bonding 105mmx50mm 27 Pcs 234 Engine Oil 28 Ltrs. 235 Car Fan 12v 1 Pc 236 Engine Support F6a 2 Pcs 237 Hose Clip 1 1/2" 10 Pcs 238 Oil Filter Jc-111 4 Pcs 239 Oil Filter C-513 2 Pcs 240 Oil Filter C-506 2 Pcs 241 Wire Gi #16 5 Kilos 242 U-bolt Rear 27mmx17" 4 Pcs 243 Bulb H4 12v. 10 Pcs 244 Nikkolitte Lead 11mmx300mm 20 Pcs 245 Clutch Lining 2kd 10" 1 Pc 246 Clutch Relining 12" 2 Pcs 247 Brake Pad Bonding 112mmx50mm 12 Pcs 248 Idler Bearing 65mmx13mm 1 Pc 249 Back Rest Double 12"x18" 1 Pc Heavy Equipment - 922,230.00 250 Inner Tube 10"x20" 15 Pcs 251 Tire Flap 10"x20" 5 Pcs 252 Wiper Blade 18" 5 Pcs. 253 Wiper Blade 22" 5 Pcs. 254 Clutch Dnc Assy. 10pdi 18"x16" 1 Pc. 255 Leaf Spring P415 P3 Rr. 4 Pcs. 256 Tie Rod End 10pei 170mmx150mm 2 Sets 257 King Pin Kit 10pei 250mmx50mm 2 Sets 258 Leaf Spring 278.1 1 Pc. 259 Leaf Spring 278.2 1 Pc. 260 Torque Rod Bushing 145mmx100mm 24 Pcs 261 Tail Light Assy. 320mmx110mm 2 Pcs. 262 Brake Caliper Assy. Frt 10"x7" 1 Pc 263 Paint White Qde 4ltrs./gal 5 Gals. 264 Lacquer Thinner 4ltrs./gal. 3 Gals. 265 Gear Shafting Fabrication 405mmx75mm 1 Unit 266 Injection Pump Calibration 10pei Overhauling 1 Unit 267 Gasket Kit Std 1 Set 268 Plunger & Barrel Std 11 Pcs 269 Governor Oil Seal 4mmx12mm 2 Pcs 270 Oring Flange Cap Std 4 Pcs 271 Check Valve Std 4 Pcs 272 Piston Std 1 Pc. 273 Spindle Std 1 Pc 274 Fuel Pump Oil Seal 6mmx25mm 1 Pc 275 Assembly Injection Pump Calibrate 8dc9 1 Unit 276 Leaf Spring H.d 80x12x55 4 Pcs 277 Center Bolt 12x15 2 Pcs 278 Wd 40 200ml 5 Cans 279 Soldering Lead 2mmx5m 1 Roll 280 Soldering Cement 25g 5 Cans 281 Battery Tester 110mmx300mm 1 Unit 282 Clutch Secondary Assy. 120mmx180mm 1 Pc 283 Center Bolt 10mmx18" 5 Pcs 284 Flexible Pipe 50mmx610mm 1 Pc 285 U Bolt W/nut (dumptruck) 420mmx27mm 2 Pcs 286 Rubber Cup 1' 030-81373 10 Pcs. 287 Release Bearing 32mmx66mmx33mm 3 Pc 288 Hub Bolt 10pd 21mmx119mm 20 Pcs 289 Engine Valve Std 1 Set 290 Upper Hose 1"x10" 1 Pc 291 Lower Hose 1"x14" 1 Pc 292 Air Governor 92mmx75mm 2 Pcs 293 Brake Fluid 1000ml. 34 Ltrs. 294 Switch Secondary Assy 28mmx55mm 2 Pcs 295 Hose Clip 1" 30 Pcs. 296 Wiper Blade 22" 2 Pcs 297 Atf 4ltrs./gal 5 Gals. 298 Hydraulic Jack 8 Tons 110mmx200mm 2 Pcs. 299 Leaf Spring Bushing 43mmx46mm 8 Pcs. 300 Sandpaper #1000 280mmx250mm 20 Pcs 301 Sandpaper #800 280mmx250mm 20 Pcs 302 Sandpaper #120 280mmx250mm 20 Pcs 303 Pressure Washer Gun 10mmx1m 1 Pc. 304 Shock Absorber 460mmx45mm 2 Pcs. 305 Brake Disc. Pad Bonding 120mmx50mm 25 Pcs 306 Car Fan 24v. 220mmx180mm 2 Pcs. 307 Torque Converter Machining 355mmx100mm 1 Pc. 308 Primary Oil Filter # 568 10pei 187mmx130mm 5 Pcs. 309 Secondary Oil Filter # 570 10pei 180mmx105mm 5 Pcs 310 Fuel Filter N5507 10pei 160mmx100mm 5 Pcs 311 Acrylic Primer Surfacer Gray 1 Ltrs. 312 Acrylic Thinner 4ltrs./gal. 1 Gals. 313 Assorted Sand Paper 280mmx230mm 40 Pcs. 314 Priming Pump 10pei Nd 87mmx14mm 5 Pcs 315 Packing Seal Kit 30mmx120mm 4 Sets 316 Oil Seal Hu8 10pei 16mmx175mm 2 Pcs. 317 Air Chuck 8mmx50mm 2 Pcs 318 Wheel Cylinder Boots 10pei 18mmx72mm 20 Pcs 319 Hydraulic Hose Fabricate Small 860mmx14mm 1 Pc. 320 Hydraulic Hose Fabricate Big 22mmx40" 1 Pc. 321 Hydraulic Hose Fabricate Long 22mmx64" 1 Pc. 322 Steering Hose Fabrication 8mmx410mm 1 Pc. 323 Ball Joint Upper 22mmx120mm 2 Pcs 324 Ball Joint Lower 22mmx120mm 2 Pcs 325 Hydraulic Hose Fabricate 35mmx1m 1 Pc. 326 Starter Assy. 130mmx200mm 1 Pc 327 Electrical Tape 1"x5m 20 Pcs 328 Quick Release Coupling 80mmx40mm 2 Sets 329 Cranshaft Assy. F6a 350mmx22mm 1 Pc. 330 Maxi Break Switch 8mmx12mm 1 Pc 331 Hub Bolt Rr. (dumptruck) Lh 20 Pcs 332 Corrugated Belt 9.5x650 2 Pcs 333 Clutch Relining 17" 1 Pc 334 Clutch Booster Assy. 230mmx120mm 1 Set 335 Radiator Coolant 4 Ltrs/gal. 7 Gals. 336 Oil Filter 260mmx100mm 2 Pcs 337 Hub Bolt 10pe 21mmx119mm 20 Pcs 338 Clutch Booster Assy. 10pdi 230mmx130mm 1 Pc 339 Rubber Cup Sc80209 10 Pcs 340 Polyribbed Belt 4pkx650 2 Pcs 341 Master Cup 81373 10 Pcs 342 Master Cup 81363 10 Pcs 343 Hub Cup 390mmx50mm 1 Set 344 Engine Oil Multigrade 4ltrs./gal. 9 Gals. 345 Drum Pump 200mmx100mm 1 Pcs 346 Wiper Blade 32" 2 Pcs 347 Bolt W/ Nut 6x1" 20 Pcs 348 Wiper Blade 18" 6 Pcs 349 Rags 1000pcs/sack 1 Sack 350 Battery Clamp 26mmx50mm 20 Pcs 351 Tire Flap 1000x20 4 Pcs 352 Inner Tube 1000x20 5 Pcs 353 Wheel Cylinder Assy. 1 1/8 2 Pcs 354 Crankshaft Oil Seal 6mmx32x47mm 6 Pcs 355 Rubber Cup 81373 10 Pcs 356 Rubber Cup 81363 10 Pcs 357 Rubber Cup 4516 20 Pcs 358 Rubber Cup 4518 20 Pcs 359 Clutch Booster Piston 7/8" 4 Pcs 360 Hydraulic Jack 5 Tons 110mmx20mm 1 Pc 361 Air Hose Fabrication 10mmx24" 2 Pcs 362 Hydraulic Hose Fabricator 1'x67" 2 Pcs 363 Clutch Booster Assy. 90mm 1 Set 364 Battery Relay 24v. 2 Pcs 365 Engine Oil 20w 40 5 Gals. 366 Clutch Pressure 18" 1 Pc 367 Clutch Disc 18" 1 Pc 368 Back Rest Single 18" 4 Pcs 369 Side Mirror 4" 4 Pcs 370 Bosch Relay 24v 10 Pcs 371 Battery Solutions 15 Btls. 372 Hydraulic Packing Fabricate 4mmx120mm 6 Sets 373 Release Bearing 66mmx24mm 1 Pc 374 Fan Blade 4mmx16" 1 Pc 375 Clearance Light 24v Bulb Type 12 Pcs 376 Multigroove Belt 7pk-1470 2 Pcs 377 Led Clearance Light 24v. 12 Pcs 378 Center Bolt 8mmx16" 5 Pcs 379 Magnetic Valve 24v. 1 Pc 380 Wiper Blade 22" 2 Pcs 381 Bolt W/ Nut 8x1 1/2" 10 Pcs 382 Headlight 24v 2 Pcs 383 Expansion Valve 12mmx70mm 1 Pc 384 Tail Light 24v Lh/rh 2 Pcs 385 Hub Oil Seal 10pei 15mmx174mm 6 Pcs 386 Bucket Tooth Pin 47mmx25mm 20 Pcs 387 Headlight Assy. 10pei 24v. 2 Pcs 388 Clutch Relining 17" 3 Pcs Total

Details: General Definition of the Subject of Public Procurement The Public Procurement is Divided into Subparts Pursuant to Section 101 of the Civil Procedure Code. 1. Part of the Public Contract: "provision of Cleaning Works for the City of Příbor" 2. Part of the Public Contract: "provision of Cleaning Works - Cultural Center of the City of Příbor" 1. The Public Contract is awarded within the framework of this Procurement Procedure. 2. Part of the Public Contract Will Be Awarded Separately, Following the Procedure Pursuant to § 18 Par. 3 Coll. The Below Refers Only to Part 1 of the Public Procurement. The subject of the performance of the Public Order is the provision of regular cleaning services in designated areas of the city of Příbor, all using the necessary (appropriate) equipment and means of the supplier. Schemes of Designated Spaces and Their Dimensions Form Attachment No. 1 to 3 of the Sample Work Contract A are an integral part of the Tender Documentation. Cleaning Services Will Be Implemented In Time Sections. Cleaning of Administrative Spaces, Library, Tourist Information Center, Sigmund Freud's Birthplace, Piarist Monastery Will Be Carried Out In The Following Scope: Daily Cleaning: Sweeping And Mopping Floor Areas And Stairs Including Handrails, Luxuring Carpeted Areas, Washing Floors, Lift Handles And Walls, Wiping Dust From Furniture And Window Sills, Taking Out Everyone's Trash Cans Including Sorting Waste, Changing Microtene Bags, Wiping Free Parts of Tables, Washing Worktops and Kitchen Sinks, Complete Cleaning of the Toilet Space - Mopping Floors, Washing Tiles and Tiles, Washing Washbasins, Toilets Including Seats, Urinals, Cleaning Faucets and Mirrors, Refilling Paper Towels, Toilet Papers And Liquid Soaps (Purchase Ensured by the Principal) Etc. Weekly Cleaning (Performed 1 X a Week): Wiping Doors Including Handles, Window Sills, Radiators, PC Surfaces, Monitors, Telephones, Wiping Dust From Switches, Sockets, Moldings, Sweeping Cobwebs, Etc. Monthly Cleaning (performed 1 X Per Month): Complete Cleaning of Furniture Including Surfaces Above 1.7 M, Washing Doors and Cladding Walls, Luxing Upholstered Furniture, Wiping Fire Extinguishers, Etc. Annual Cleaning (performed twice a year): Washing of windows and lights, including removable covers, etc. Extraordinary Cleaning Services This is the performance of extraordinary cleaning based on the client's request. Extraordinary Cleaning Will Be Performed Only Upon Request To The Extent Determined By The Client And Will Be Charged Based On The Hourly Rate From The Selected Supplier's Quotation. As part of the Extraordinary Cleaning, the Client may request the cleaning of the Space above the scope of the normal cleaning, e.g. Cleaning after painting or construction modifications, due to accidents, vandalism, etc. As part of the cleaning of residential houses, the following activities will be carried out: Cleaning of corridors, staircases, including railings and handrails, washing of windows, including frames, washing of lighting fixtures, washing of entrance doors, including frames, washing of elevators, lockers, cleaning of cellars, etc. More in the Details of the Tender Documentation.