Painting Tenders

Details: Description Republic Of The Philippines Province Of Southern Leyte Municipality Of Hinunangan Barangay Talisay Invitation To Bid Construction Of Second Floor Offices Project Id: 2024bedf-01 Solicitation No. 202401 1. The Barangay Of Talisay, Through The Trust Fund Cy 2024 Intends To Apply The Sum Of Four Hundred Sixty Seven Thousand Two Hundred Thirty Four Pesos Only (php 467,234.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Second Floor Offices. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. General Requirements 1.00 Lot Demolition Works 1.00 Lot Concrete Works 1.94 Cu.m Reinforcing Steel Bars 489.07 Kgs Formworks &scaffolding 37.20 Sq.m. Roof Framing Works 1.00 Lot Roofing Works 25.44 Sq.m. Masonry Works 47.68 Sq.m. Plastering Works 47.68 Sq.m. Ceiling Works 25.44 Sq.m. Paint Works 95.36 Sq.m. Floor Finishes 18.00 Sq.m. Doors & Windows 3.00 Sets Electrical Works 1.00 Lot 2. The Barangay Of Talisay Now Invites Bids For The Construction Onstruction Of Second Floor Offices. Completion Of The Works Is Required Within 30 Calendar Days. Bidders Should Have Completed, Within Six Months From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. (i) Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Lgu Of Barangay Talisayand Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 5 - November 25, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php 500.00). 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before November 25, 2024 At 2:00 Pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On November 25, 2024 At 2:00 Pm At The Barangay Office Of Barangay Talisay, Hinunangan, Southern Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7.the Barangay Talisay, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Hon. Alberto R. Oñez Chairman, Committee On Infrastructure Barangay Talisay, Hinunangan, Southern Leyte Hon. Leticia Masing (sgd) Bac Chairman Noted: Hon. Renie P. Liguid (sgd) Punong Barangay

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00127 : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao 1. The Dpwh Regional Office Ii, Through The 2024 Ps-dbm Revolving Fund Intends To Apply The Sum Of ₱64,525,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00127: Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao Contract Id No. : 24b00127 Location : Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Brief Project Description : Ps-dbm Building, Generator Set With Generator Set House And Concrete Pavement, Building = 23.0 X 33.8 Meters Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures Equipment & Appliances For The Field Office Of The Engineer Other General Requirements • Permits And Clearances • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Additional Geotechnical Investigation Earthworks • Trees (furnishing And Transplanting) • Clearing And Grubbing • Removal Of Trees • Structure Excavation • Embankment (from Structure Excavation And Borrow) • Gravel Fill Subbase And Base Preparation • Aggregate Subbase Course Surface Courses • Pccp, 0.15m Thick, 14-day Concrete Plain And Reinforced Concrete Works • Structural Concrete, (3000 & 4000) Psi, Class A, 28 Days • Lean Concrete • Reinforcing Steel Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling, Metal Frame, Gypsum Board • Aluminum Metal Cladding • Modular Partition • Louver Window • Flush Door • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (casement, Awning, Fixed) Type • Frames (jambs, Sills, Head, Transoms And Mullions) • Doors, (flush, Wood Panel) • Roll-up Doors • Waterproofing, Liquid • Built-up And Preformed Membrane • Canopy Drain With Strainer • Unglazed Tiles • Cement (floor, Plaster) Finish • Stucco Finish • Painting Works, (masonry/concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel), (100 & 150) Mm • Louver Block • Metal Structure Accessories • Metal Railing (steel) • Sanitary/plumbing Fixtures • Cold Water Lines • Sewer Line Works • Storm Drainage And Downspout Electrical Works • Rigid Steel Conduit • Rigid Polyvinyl Chloride Pipes (pvc/upvc) • Boxes/wire Gutter • Fittings And Accessories • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three-way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Pop-up Type/floor Duplex Convenience Outlet/receptacle (gt) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pad Mounted Distribution Transformer (oisc) With Complete Accessories • Generator (single Or Three Phase - Standby) • Lighting Fixtures Electronic Works • Network Cabling • Cctv System • Network Video Recorder • Lcd, Led Monitor • Door Access And Card Reader System • Public Address System • System Management Amplifier • Remote Microphone • Ceiling Speaker • Wall Mount Speaker • Wires/cables • Fire Alarm System • Smoke Detector With Base • Heat Detector With Base • Fire Alarm Control Panel • Manual Pull Station Switch • Back-up Battery Pack Mechanical Works • Ventilating Equipment • Exhaust Fan (ceiling Cassette, Wall Mounted, Wall Mounted, Industrial Type) • Booster Pump With Control • Water Tank (stainless) • Fire Department Connections For Wet And Dry Type System • Air Conditioning System (vrf/vrv) • Service Elevator Approved Budget For The Contract (abc) : ₱64,525,000.00 Contract Duration : 243 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 47 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - 26, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 13, 2024, 1:00 Pm At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 26, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 26, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 6 -12, 2024 Conspicuous Place (procurement Bulletin Board): November 6 -12, 2024

Details: Description I. Project Billboard Ii. Occupational Safety & Health Program Iii. Clearing & Grubbing Iv. Structure Excavation V. Formworks Vi. Reinforced Concrete Vii. Painting Works Viii. Solar Led Street Light 1. Barangay Calsadahay, Tanauan, Leyte Through The Bids And Awards Comm.) Invites Suppliers, Contractors, & Distributors Of Construction Materials For The Project: Installation Of Solar Streetlights (8units) 2. The Bids And Awards Committee Will Use A Non-discretionary Pass/fail Criterion In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. 3. The Following Eligibility Documents In Two (2) Copies Duly Certified Must Be Submitted To The Bids And Awards Committee (bac) Not Later Than November 20, 2024: A.) Letter Of Intent; B.) Business License Permit/valid And Current Mayor’s Permit/municipal License; C.) Dti Business Name Registration Or Sec Registration Certificate; D.) Latest Audited Financial Statement; E.) Company Profile; F.) Tax Identification No. (tin); G.) Sworn Statement By The Prospective Bidder That He Is Not “barred” Or “blacklisted” From Participating In The Government Biddings, Including Non-inclusion In The Consolidated Blacklisting Report Issued By Gppb; H.) Other Appropriate License As Maybe Required By The Procuring Entity; I.) Statement Of Prospective Bidder Of All Its Ongoing And Completed Government And Private Contracts Within The Period Specified In The Iaeb, Including Contracts Awarded But Not Yet Started; J.) Articles Of Incorporation, Partnership Or Cooperation, Whichever Is Applicable, Including Amendments Thereto, If Any; K.) Sworn Affidavit Of The Bidder That Is Not Related To The Head Of The Procuring Entity, Members Of The Bac, Twg And Secretariat And The Members Of The Pmo And The Designers Of The Project, By Consanguinity Or Affinity Up To The Third Civil Degree; L.) Valid Joint Venture Agreement In Case Of Joint Venture; M.) Letter Authorizing The Bac Or Its Duly Authorized Representative/s To Verify Any Or All Of The Documents Submitted For Eligibility Check; Certification Under Oath That Each Of The Documents Submitted In Satisfaction Of Eligibility Requirements Is An Authentic And Original Copy, Or A True And Faithful Reproduction Of The Original Complete And That All Statements And Information Provided Therein Are True And Correct; N.) Other Appropriate Licenses As May Be Required By The Procuring Entity Concerned; O.) Copies Of End-user’s Acceptance Letter For Completed Contracts; P.) Specification Of Whether Or Not Prospective Bidder Is A Manufacturer Supplier Or Distributor; Q.) Audited Financial Statement “received” By The Ir Or Its Duly Accredited And Authorized Institutions, For Immediately Preceding Calendar Year, Showing Among Others The Total Assets And Liabilities; R.) Computation Of Net Financial Contracting Capacity (nfcc) Or S.) Certificate Of Commitment Specific To The Contract At Hand, Issued By A Licensed Bank To Extend To The Bidder A Credit Line If Awarded The Contract Or; T.) A Cash Deposit Certified Certifying A Hold Out On Cash Deposits Issued By A Licensed Bank Which Shall Also Be Specific To The Contract To Be Bid, In An Amount Not Lower That The Set By The Procuring Entity In The Bidding Documents, Which Shall Be At Least Equal To 10% Of The Approved Budget For Contract. 4. Sealed Two (2) Envelope System Will Be Received By The Bac At The Barangay Hall Not Later Than 2:00 Pm On November 20, 2024. 5. Barangay Calsadahay, Tanauan, Leyte Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Incurred In The Preparation Of Their Bids. 6. Barangay Calsadahay, Tanauan, Leyte Reserves The Right To Reject Or All Bids To Waive Any Defect And Informally Therein. Hon. Rosario A. Abanis Barangay Chairman Instructions To Bidders 1.1 Only Firms/entities Duly Qualified Eligibility Requirements By The Bids And Awards Committee(bac) To Participate In The Bidding May Submit Proposals. 1.2 Bids /tenders Shall Be Considered Only From Bidders Who Have Visited The Site And Who Have Secured Bid Documents With The Equipment Specification At The Bac Secretary, 1.3 All Bids/tenders Shall Be Prepared In English And Submitted To Bac Secretary; 1.4 The Bidder Shall Prepare His Bid By Accomplishing And Submitting Three (3) Copies Of The Bid/tender Documents(e.i. Prescribed Forms)including The Required Enclosed Attachments. All Blank Space Must Be Properly Filled Out By The Typewriter Except Where Specifically Otherwise Stated. 1.5 If Erasures Or Changes Are Made ,each Erasures Or Changes Must Initiated By The Person Signing The Bid/tender. 1.6 Bid/tenders Will Be Submitted For Any Items. Bids/tenders Must Be For All Items In The Bill Of Quantities Of Any Items. Bid/tenders Shall Be Written In Words As Well As In Figures, The Price In Words Shall Prevail. In Case Of Discrepancy In The Unit Price And The Extension Thereof, The Unit Price Shall Govern. 1.7 All Pages In Bid Tender Documents, Including Annexes Shall Be Signed In Ink. The Bid/tender Must Signed By The Bidder Himself Or Duly Authorized Person Or Persons. 1.8 The Bid/tender Shall Contain All The Information And Data Required To Be Furnished By The Bidder/tender. 1.9 The Bidder Required To Make A Careful Examination And Contemplated In The Bid Documents, Specifications, Special Provisions If Any, And The Form Of Contract, And Fully Informs Himself As To Quality Of Materials. The Submission Of Bids By Any Bidder Shall Be Deemed That He Has Made Such Examination And Is Satisfied As To The Condition To Be Encountered In Performing The Work Contemplated And Has Familiarized Him With All The Requirements Governing Or Affecting Him And His Operations. 1.10 The Barangay Assumes No Obligations Whatsoever To Compensate Or Indemnify The Bidders /tenders For Any Expense Or Loss That May Occur In The Preparation Of Their Proposals, Nor Does The Barangay Guarantee That An Award Will Be Made Under The Contract Documents. Bid Security 1.11 All Bids Shall Be Accomplished By The Bid Security Least Equal To, And Not Lower Than One Percent(1%)as Approved Budget For The Contract To Be Bid In The Form Of Cash, Certified Check, Cashier’s Check ,managers Check, Bank Draft Or Irrevocable Letter Of Credit ,one And One Half Percent(1 ½%) In The Form Of Bank Guarantee, Two And One Half Percent (2 ½%)in The Form Of Surety Bond Callable Upon Demand Issued By A Reputable Surety Or Insurance Company Payable To Barangay Calsadahay, Tanauan, Leyte As A Guarantee That The Successful Bidder Within Ten Calendar Days(10) Or Less From Receipt Of Notice Of Award ,enter Into Contract With The Barangay And F6rnish The Performance Bond. Bid Securities Shall Be Valid For A Reasonable Period As Indicated Which Shall Not Be Less Than One Hundred Twenty (120) Calendar Days Following The Opening Of Bids. 1.12 No Bid Securities Shall Be Returned To Bidders After The Opening Of Bids And Before Contract Signing, Except Of Those That Failed To Comply With Any Of The Requirement Tone Be Submitted In The First Bid Envelop Of The Bid. 1.13 Failure To Enclose The Required Bid Security In The Form And Amount Prescribed Herein Shall Automatically Disqualify The Bid Concerned. Submission And Receipt Of Bids 1.14 Bid/proposals In The Prescribed Form, Shall Be Submitted In Two (2) Sealed Envelope Properly Marked In Capital Letters The Name/title Of The Project To Be Bid And The Name Of The Bidders, And Must Be Addressed To; The Bac Chairman, Bids And Awards Committee(bac) And Or, Type Bac Chairman, Barangay Calsadahay, Tanauan, Leyte. The Bidders Shall Mark The Two Envelopes; Do Not Open (date And Time Of Opening Of Bids). 1.15 The First Envelope Which Should Be Marked “1st” Shall Contain The Following; 1.bid Security As To Form Amount And Validity Period ;2.authority Of The Signatory ;3.production /delivery Schedule; 4.manpower Requirements;5.after Sales Service/parts; If Applicable;6.technical Specifications;7. Commitment From The Suppliers/distributors/manufacturer’s Bank To Extend To Him A Credit Line If Awarded The Contract To Be Bid Or Cash Deposit Equivalent To Ten Percent (10%) Of The Abc (p264,545.64);8.duly Signed Certificate In Compliance With The Disclosure Provision Under Section 47 Of The Act In Relation To Other Provisions Of Ra3019 ;duly Signed Statement Attesting To Have Complied With Responsibilities Listed In Gpra Irr-a And Other Documents /materials As Stated In The Instruction To Bidders. 1.16 The Second Envelope, Which Should Be Marked “2nd” Shall Contain The Following; 1.the Bid Prices In The Bill Of Quantities In The Prescribed Bid Form; 2.the Recurring And The Maintenance Costs, If Applicable. Withdrawal Of Bids 1.17 A Bidder May Modify Its Bid Before Deadline For The Submission And Receipt Of Bids Not Allowed To Retrieve Its Original Bid, But Shall Send Another Bid Equally Sealed, Properly Identified And Marked As A Modification And Stamped Received By Bac. 1.18 A Bidder Will Be Allowed To Withdraw His Bid Prior To The Time Set For Its Opening Provided He Communicated His Purpose In Writing To The Bac; In This Case The Bid/tender Shall Return To Him Un Opened .no Bid Can Be Withdrawn For Any Reason Whatsoever After Opening Of Bids Has Commenced. 1.19 The Bidder Shall Be Responsible For Having Taken Steps To Carefully Examine All The Contract Documents ,have Fully Informed Himself With All Conditions, Local Or Otherwise ,relative To The Carrying Out Of The Contract Work; 1.20 The Barangay Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Or Conclusions Obtained By The Bidder Out Of The Data Furnished By The Barangay Or Its Consultant, Either Before Or Conditions Contained In The Contract. Laws, Ordinances , Rules And Regulations 1.21 In Submitting A Proposal/bid ,the Bidder Is Considered To Have Familiarized Himself, Acts, Rules And Regulations Of The Republic Of The Philippines, Including Any Or All Local Ordinances Or Rules Or Regulations, Which In Any Manner May Affect Or Apply To The Operation And Activities Of The Bidders. The Bidder Shall Be The Employer Of The Personnel Whom He Will Engage The Prosecution Of The Contract And Is Under Obligation To Comply With The Labor Laws Of The Philippines. 1.22 In Addition , The Bidder Is Advised To Carefully Examine And To Inform And To Familiarized Himself With All The Ordinances ,rules, And Regulations Adopted By The Barangay In Regards With The Procurement Of Goods. Bidders Competence 1.23 The Barangay Reserves The Right To Fully Examine The Competence And Responsibility Of The Bidder At Any Time Before Award Of Contract By Aby Means And To Reject Any Bid/tender When Statement As To Business And Technical Organizations Or Financial Resources Or Construction Performance Have Been Found To Be False /and Or Fabricated And In The Barangay’s Opinion Would Justify Rejection. Pre Bid Conference 1.24 No Pre Bid Conference Will Be Conducted Except Upon Written Request Of Any Prospective Bidder Which Shall Be Held Within A Reasonable Period Before Prospective To Adequately Prepare The Bids Subject To The Approval Of The Bac. 1.25 Bids Will Be Opened On November 20, 2024 At Exactly 2:00 Pm At The Barangay Hall. Bidders Or Authorized Representative May Attend The Opening Of Bids. 1.26 Immediately After Opening Of Bids The Bac Of The Barangay Will Undertake A Thorough Study And Bid Evaluation Of Proposed Submitted. Award Of The Contract Shall Be Made To The Bidder With The Lowest Calculated Responsive Bid. 1.27 The Barangay Reserves The Right To Reject Any Or All Bids /tenders ,to Waive Informality In The Bid/tender Received .the Right Is Also Reserve To Reject The Bid/tender Of Any Bidder Who (a)have Previously Failed To Satisfactorily Perform Or Complete Any Construction Contract Undertaken By Him. (b)was Qualified In The Eligibility Requirement On The Basis Of Suppressed Or False Information; Or (c) Such Other Compelling Grounds As Determined During Bid Evaluation Of The Proposal Of Bids; 1.28 Within A Period Not Exceeding Fifteen (15) Calendar Days From The Declaration By The Bac Of The Lowest Calculated Responsive Bid Or Highest Rated Responsive Bid And Immediately After Approval Of The Recommendation Of The Bac By The Local Chief Executive Of His Duly Authorized Representative Shall Issue The Notice Of Award To The Winning Bidder. Created By: Hon. Rosario A. Abanis Barangay Chairman

Details: Description Section I. Invitation To Bid Da8-goods-2025-02 (pr No. Bt-25-goods-consol-39879-0004) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Multiple Fund Intends To Apply The Sum Of Nine Million One Hundred Thirty Thousand Pesos (p9,130,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Agricultural Equipment” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Per Lot (terms And Conditions). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost Lot 1: 2 Number Recirculating Dryer 2,950,000.00 5,900,000.00 Technical Specifications: 1. Type: Recirculating Batch Type 2. Total Maximum Height: 7.2 M 3. Product Quality A. Cracked Grain, % Increase: 3%, Max B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain % Increase:2% Maximum 4. Drying System A. Holding Capacity: 6 Tons Wet Palay @ 24% Moisture Content, Minimum B. Moisture Gradient: 2%, Maximum C. Drying Efficiency: 75%, Minimum D. Drying Rate: 1% /hr, Maximum E. Drying Loss/spillage: 1%, Maximum F. With Compatible Electric Motor For Drying System G. Vertical Rectangular Bin- Consist Of Rectangular Vertically Installed Drying Chamber H. With Control Panel I. With Mimic Flow Of Operation J. With Basic Electrical Meter Such As Ammeter And Voltmeter Display 5. With Basic Safety Cut-off Features: A. Emergency Shutdown Button B. With On-off Pilot Lights Switch Button And Indicating Operating Motor, Each Component With Motor Should Have Individual Circuit Breaker C. With Magnetic Starter With Overload D. With Interlocking System And Emergency Button 6. Construction: Stainless Steel-astm 304 For Following Parts Such As: A. Drying Bin Wall/cover B. Discharge Chute C. Elevator Casing D. Bottom Boot Section Of The Elevator E. Drying Chamber: Perforated Screen For Non-lsu Type Or Inverted V-duct For Lsu Type F. Auger G. Auger Casing H. Receiving Hopper 7. Mounting Frame A. Steel Angular Bar (50mmx50mmx6mm, Minimum) B. Mounting Frame Shall Be Fitted With Brackets For Contrete Floor Installation 8. With The Following Components: A. Heating System 1 I. Petroleum Based Fuel: Direct Fired Ii. Heating System Efficiency: 90%, Minimum Iii. With Following Accessories:  Flame Sensor  Electronic Ignition System  Automatic Fuel Shut-off  Adjustable Fuel Vaporizer  Automatic Temperature Control  Temperature Monitoring System  Galvanized Fuel Container Made Of Non-corrosive And Heat-resistant Material At 200 Liters Capacity, Minimum  Compatible Electric Motor For The Heating System B. Heating System 2 I. Biomass Fuel: Indirect-fired Ii. Heating System Efficiency: 50%, Minimum Iii. Can Provide The Required Heating Temperature Or Can Provide 70°c Drying Temperature Iv. Heat Exchanger: Made Of Fire Tubes V. Burning Chamber: Made Of Refractory Bricks  With Automatic Fuel Feeder: Auger/air Blown/plunger Type (provided That The Feeder Is Not Directly Exposed To The Burning Fuel) Vi. With The Following Accessories:  With Temperature Control  With Compatible Electric Motor Vii. Burning Efficiency Of Biomass Furnace: 95%, Minimum  With Compatible Electric Motor C. With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2 I. Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet D. Dust Collection System Consist Of Cyclone Separator/collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 9. With Following Accessories: A. Generator Set I. Capacity: Compatible To The Drying System, Able To Provide Sufficient Continuous And Peak Power Requirements Of The Drying System Ii. Voltage Requirement Compatible To The System Iii. Power Supply/generating System Should Be Brand New Iv. Provided With Mechanical Transfer Switch (mts) V. The Electrical Wire, Wire Accessories, And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided By The Bidder Vi. With The Thermal Insulation And Noise Suppressor B. Portable Handheld Moisture Meter I. Grain: Paddy, Rice, And Other Grains (optional) Ii. Type: Capacitance Iii. Moisture Range:12-25% Or Wider Iv. Accuracy: ≠0.5% Or Better V. Lcd/led Display Vi. Battery Operated Vii. Automatic Density And Temperature Compensation Viii. Product Brochure With Technical Specifications In English C. Standard Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium I. One (1) Set Socket Wrench (no. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32, Minimum) Ii. One (1) Set Combination Wrench (open And Box, 10 Pcs-size Appropriate To The Drying System) Iii. Electrical Plier, 200mm, Minimum Iv. Screwdriver: Philips And Flat Head, 300mm,minimum V. Grease Gun, 250mm Cylinder Length, Minimum Vi. Mechanical Pliers, 200mm, Minimum Vii. Heavy Duty Toolbox And Roll Up Tools Holder  Size That Could Accommodate The List Of Tools D. Vacuum Cleaner With Air Blower I. Rated Input Power:1,000 W, Minimum Ii. Vacuum Cord: 5m, Minimum E. Basic Safety Kits F. Personal Protective Equipment  Dust Mask  Safety Goggle  Ear Muff/ear Plug G. One (1) Unit Fire Extinguisher H. Dry Chemical, Stored Pressure Type, 6.80 Kg, Minimum I. Automatic Portable Bag/sack Closer/sewer 10. With Compatible Biomass Furnace 11. With Compatible Transformer 12. Provide Reflectorized And Waterproof Da-rice Logo (12" X 12") Lot 2: 2 Number Walk Behind Transplanter 400,000.00 800,000.00 Technical Specifications: 1. 4 Stroke Gasoline Engine At 4 Hp, Minimum 2. Number Of Planting Rows: 4 Rows, Minimum 3. Row Spacing: 30 Cm 4. Hill Spacing: 12-21cm, Adjustable 5. Field Efficiency: 80%, Minimum 6. Percent Damaged Hills And Percent Missing Hills: 10%, Maximum 7. Noise Emitted: 92db, Maximum 8. With Low Bed Trailer 9. With Manually Operated Seed Sowing Machine With Valid Amtec Test Report 10. With Compatible Seedling Tray: 500 Pcs, Minimum A. Dimension: 60cm X 30cm X 3.5cm (length X Width X Thickness) B. Hole Aperture: 1-1.5mm 11. Holder And Accessories Required For Maintenance With Full Dealer Optional Parts 12. With Original Equipment Manufacturers Manual Written In English. 13. With The Following Standard Heavy Duty Tools And Accessories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. .provide With Extra 2 Liters Engine Oil 14. Provide Reflectorized And Water Resistant Da-rice And Da-noap Logo (4" X 4") 15. Conform To Paes/pabes 151:2015 16. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 3: 1 Number Float-assist Type Walking Type Tractor (floating Tiller) 130,000.00 130,000.00 Technical Specifications: 1. Type: Mudboat 2. Rated Power: Minimum Of 10 Hp Diesel Engine, Aircooled 3. Fuel Consumption: Maximum Of 2.5li/hr 4. Continuous Power: 85% Of Rated Power, Minimum 5. Peak Transmission: 80%, Minimum 6. Total Cutting Width: 1.0 Meter Minimum 7. Noise Emitted: 95 Db, Maximum 8. Complete With Throttle Lever And Clutch Lever On The Handle Bar 9. The Unit Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 10. With The Following Standard Heavy Duty Tools And Accesories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. Provide With Extra 2 Liters Engine Oil 11. Provide Reflectorized And Water Resistant Da-rice Logo (4" X 4") 12. Conform To Paes/pabes 347:2022 13. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 4 2 Number Rice Mill (single Pass) 1,150,000.00 2,300,000.00 Technical Specifications: 1. Rubber Roll Dehuller 2. Input Capacity: Minimum Of 0.5 Ton/hr At 98% Purity 3. Hulling Efficiency: 75% Minimum 4. Prime Mover: 23 Hp Diesel Engine (minimum), Watercooled With Brand New Battery (atleast 3sm) 5. Milling Recovery Index: 0.98 Min. 6. Percent Head Rice Index: 0.90 Min. 7. With Protection For All Moving Parts 8. With Pre-cleaner A. Input Capacity: Should Be Compatible With The Hulling Capacity Of The Units To Be Supplied (375kg/hr Minimum) 9. With Trailer A. Steel Made Channel Reinforced By Steel Angular Bars B. Leaf Spring Suspension System C. With Brand New Tires (pneumatic) D. With Reflectorized Slow Moving Vehicle Emblem 10. With Bucket Elevator A. Material: Plastic 11. With The Following Standard Heavy Duty Tools And Accessories: A. One (1) Unit Weighing Scale With 500kg Capacity Minimum B. One (1) Piece Calibrated Grain Moisture Monitoring Device (portable Handheld Moisture Meter) J. Grain: Paddy And Rice Ii. Type: Capacitance Iii. User’s Manual In English C. With Fire Extinguisher For Fire Caused By Flammable Liquids I .class B Ii. Six (6) Liters Capacity D. Open Wrench Set E. Adjustable Wrench (12") F. Grease Gun G. Philips And Flat Screw Driver H. Roll Up Tools Holder I. Provide Personalized/ Fitted Material (water Resistant) For Covering J. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves K. Provide With Electric Driven Power Sprayer/ Pressure Washer Automatic Type L. Provide With Electric Blower That Has Minimum Of 700w Rated Input Power M. Provide With Extra 2 Liters Engine Oil 12. Provide Operation Equipment Manual 13. Provide Reflectorized And Water Resistant Da-rice Logo (6" X 6") 14. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Terms And Conditions: A During The Opening Of Bids, Bidders Shall Submit: 1 Certificate Of Accredited Service Center Within The Region That Could Respond Within 72 Hours (including Holidays And Weekends) Upon Request Of The End-user/beneficiary; 2 Namdac Certificate Of Accreditation; 3 Section Vii (technical Specifications) Of Bidding Document, Which Must Be Signed And Sealed By Licensed Agricultural Engineer/agricultural Biosystems Engineer; 4 Valid Amtec Test Report: I. Recirculating Dryer With A Similar Drying System Conform To The Pns.paes 201:2015 Standard For Moisture Gradient, Drying Rate, Product Quality, Drying Loss/spillage, Drying Efficiency, And Heating System Efficiency. Should Be Provided With Separate Amtec Test Report For Both Heating System. Ii. Engine Iii. Float-assist Type Walking Type Tractor (floating Tiller) Coupled With The Offered Engine Iv. Mechanical Rice Transplanter (walk-behind) Coupled With The Offered Engine V. Rice Mill (single Pass) Coupled With The Offered Engine 5 Warranty Certificate For Services, Parts, And Other Components Due To Manufacturing Defects Upon Acceptance With Minimum Of Two (2) Years For Lot 1 Only; 6 Warranty Certificate For The Machinery And Equipment Being Offerred For Lot 2, 3, & 4 Only: A. Minimum Of 1 Year For Engine From Date Of Acceptance B. Minimum Of 1 Year On Parts And Services From Date Of Acceptance. 7 Valid Certificate Of Dealership/distributorship/authority To Sell; 8 Certification Guaranteed Spare Parts Availability For At Least Five (5) Years For Lot 1 Only; 9 Permit To Operate (pto) From Bafe; B During Post-qualification, The Bidder Shall Submit: 1 Provide Certification Of Very Satisfactory Performance Of The Recirculating Dryer Being Offered As To: I) Machinery Performance; Ii) Machinery Durability And; Iii) Availability Of Parts And Service, Issued By Any Government Or Private Company Agency/company In Asian Countries, Excluding Da-rfo8, Duly Signed By The Current Head Of Agency/company Within The Last One (1) Year. The Bidder Shall Provide List Of Five (5) Customer/clients With Addresses And Contact Numbers, And Certification From At Least One (1) Customer/client Issued By Any Government For Lot 1 Only; 2 Manufacturer's Distributor's Or Bidder's Certification That The Proposed Grain Dryer Brand Has Been In The Market For The Last 5 Years, Accompanied Or Duly Supported By Documentary Proof. The Documentary Proof Must Be Verifiable Through Phone Call, Ocular Inspection Or Both, Covering The Period Beginning From 2019 Or Erlier And Maybe Any Or A Combination Of The Following (for Lot 1 Only): A. Record Of Sales B. Dealership Or Servicing Agreements Indicating The Brand Subject Thereof C. Manufacturer's Or Distributor's Certification Of Market Presence, Indicating The Name/s And Address/es Of The Dealers D. Bill Of Lading And/or Other Similar Records Indicating Shipment Or Delivery Of The Grain Dryer Brand To The Philippines E. Client's Affidavit Indicating Client's Complete Address And Telephone Number, Brand, Type, And Model Of Grain Dryer, Date Of Purchase And Duly Supported By Physical Proof Of Grain Dryer 3 Copy Of Equipment Manufacturer's Manual (in English) For Lot 1 Only: A. Recirculating Dryer Unit And Each Component Such As Drying Unit, Drying System, Generator Set, And Portable Handheld Moisture Meter Written In English/filipino 4 Certificate Of Conformity From Bafe I. Recirculating Dryer Ii. Mechanical Rice Transplanter (walk-behind) Iii. Float-assist Type Walking Type Tractor (floating Tiller) Iv. Rice Mill (single Pass) C Winning Bidder/s Shall: 1 Deliver And Install Genuine, Unaltered, And Brand New Units; 2 Conduct Formal Training, After Complete Delivery And Installation Of The Items, For The Operation And Maintenance Of The Equipment To At Least Two (2) Operators And Provide Copies Of The Training Module Written In English/filipino; 3 Deliver And Install (if Necessary) The Units To The Intended Recipients As Indicated In The Attached List Of Delivery Points Upon Receipt Of Ntp. Lot 1: Within 60 Calendar Days Lot 2: Within 30 Calendar Days Lot 3: Within 20 Calendar Days Lot 4: Within 60 Calendar Days 4 Shoulder The Delivery And Handling Cost To The Specified Drop-off Point, Materials For Testing, Fuels, And Other Necessary Requirements. 5 Inform The End-user And General Services Section (gss) Seven (7) Calendar Days Prior To The Schedule Of Delivery; 6 Non-stainless Material Should Be Painted With Rust-proofing Primer And Final Paint Color For Lot 1 Only D Any Delay Of Delivery Of Item Shall Be Subjected To Liquidated Damges Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; E Payment Scheme: A. 100% Payment Shall Be Made Upon Complete Delivery, Inspection, Amtec System Testing (test Report With Acceptable Rating), After The Conduct Of Training In The Operation And Maintenance Of The Machineries And Equipment; And Acceptance Per Lot F Winning Bidder/s Shall Submit A Snapshot Of Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 03, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents Shall Correspond To The Total Abc Of The Selected Lot/s On Which The Supplier Intends To Bid, With A Range As Indicated In The Table Below. Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Details: Description Invitation To Bid Purchase Of Vehicle Parts And Accessories For Repair And Maintenance Of Various Provincial Heavy Equipment Ib No. Gsa 2024-11-074 1. The Provincial Government Of Oriental Mindoro, Through The General Fund Intends To Apply The Sum Of One Million Nine Hundred Ninety Eight Thousand Nine Hundred Twenty Nine Pesos Only (php 1,998,929.00) Being The Abc To Payments Under The Contract For Purchase Of Vehicle Parts And Accessories For Repair And Maintenance Of Various Provincial Heavy Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro – Procurement Division Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Seven (7) Calendar Days Upon Signing Of The Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Item Description Qty./unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 Dt # 06, Isuzu 6bg1 Pn: 2000-06-010-0084-8751 Hydrovac Assy. Dt # 10, Isuzu 6bg1 Pn: 2011-05-080-0107-8751 Clearance Light 24v Insulator Hose 3/8 Electrical Tape C/b Repair Kit, 22mm U-bolt, 9/16 X 2-7/8 X 5” Auto Wire #16 Plug-in Fuse Dt #11, Isuzu 6bg1 Pn: 2011-05-080-0105-8751 Oil Seal Propeller Bolts Battery Cable Pilot Bearing Pinion Oil Seal Liquid Gasket 1104 Hub Oil Seal, Outer Rr Hub Oil Seal, Inner Rr Starter Button Penetrating Fluid Auto Wire #14 Battery Lug Rivets Rubber Cap, 1-7/16” Sand Paper Continuation On Next Page Air Horn Switch Dt # 12, Isuzu 6bg1 Pn: 2011-05-080-0106-8751 Hydraulic Jack 15t Air Horn Switch Alternator Assy. 24v Clutch Booster Assy. 70mm Cog Belt, B-46 Dt # 13, Hino W04d Pn: 2012-05-080-0104-8751 Mudguard 24” Dt # 15, Hino Wo4d Pn: 2012-05-080-0101-8751 Tires W/ Inner Tube & Flap, 8.25 X 16 Tail Light Assy. 24v Steel Epoxy Rubber Cap, 1-3/16” Penetrating Fluid Gasket Maker Sand Paper Electrical Tape Brake Lining 4” Brake Lining 4-1/2” Spray Paint Dt # 16, Hino W04d Pn: 2012-05-080-0102-8751 Signal Light Assy. Dt # 18, Sinotruk Howo Pn: 2021-05-080-0089-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 19, Sinotruk Howo Pn: 2021-05-080-0092-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 20, Sinotruk Howo Pn: 2021-05-080-0093-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt #21, Sinotruk Howo Pn: 2021-05-080-0090-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Auto Wire #14 Continuation On Next Page Dt # 22, Sinotruk Howo Pn: 2021-05-080-0086-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 23, Sinotruk Howo Pn: 2021-05-080-0094-8751 Battery 4d Battery Terminal Battery Cable Battery Lug Auto Wire #12 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt# 24, Sinotrijk Howo Pn: 2021-05-080-0091-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 25, Sinotrijk Howo Pn: 2021-05-080-0087-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 26, Sinotruk Howo Pn: 2021-05-080-0088-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 28, Sinotruk Howo Pn: 2023-05-080-0009-8751 Battery 4d Battery Terminal Isuzu 4bd1, Tadano Pn: 2015-05-080-0133-8751 Relay W/ Socket 24v Bd # 10, Komatsu D65e Pn: 2010-05-080-0117-8751 Battery Relay, Negative Ampere Gauge Ignition Switch Auto Wire #10 Electrical Tape Battery 4d Battery Terminal Bh # 5d, Lonking Cdm6225 Pn: 2021 -05-080-0095-8751 Continuation On Next Page Left Hydraulic Pressure Pump Assy. Rg # 3c, Komatsu Gd313 Pn: 2015-05-080-0127-8751 Hose 3/8” Grease Fittings Round Mirror Wiper Blade 17” Clear Silicon Penetrating Fluid Oil Seal, 30-50-10 Sand Paper Rr# 1e, Sakai Pn: 2012-05-080-0130-8751 Coolant Spray Paint Pm # 15, Hino Profia Pn: 2020-05-080-0131-8751 Air Horn 24v Air Hose Auto Wire #16 Electrical Tape Relay W/ Socket 24v Spray Paint X-x-x 2 Pcs 10 Pcs 15 Mtrs 2 Pcs 1 Pc 2 Pcs 1 Roll 10 Pcs 1 Pc 4 Pcs 4 Mtrs 1 Pc 1 Pc 1 Pc 2 Pcs 2 Pcs 1 Pc 4 Pcs 5 Mtrs 4 Pcs 1 Set 4 Pcs 2 Pcs 1 Pc 1 Pc 1 Pc 1 Pc 1 Pc 2 Pcs 6 Ft 2 Pcs 1 Set 1 Pc 12 Pcs 1 Pc 1 Pc 3 Pcs 2 Pcs 4 Pcs 4 Pcs 1 Pc 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Mtrs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Pcs 2 Mtrs 2 Pcs 4 Mtrs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Pcs 1 Pc 1 Pc 1 Pc 1 Pc 10 Mtrs 1 Pc 2 Pcs 4 Pcs 1 Pc 1 Ft 10 Pcs 2 Pcs 1 Pc 1 Pc 1 Pc 1 Pc 4 Pcs 4 Pcs 4 Pcs 1 Pc 3 Mtrs 6 Mtrs 1 Pc 1 Pc 1 Pc 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Activities Schedule Advertisement/posting Of Ib November 7, 2024  Bulletin Board Of The Pgom November 7, 2024  Pgom Website – Www.ormindoro.gov.ph November 7, 2024  Geps Website – Www.philgeps.net November 7, 2024 Issuance Of Bidding Documents November 7, 2024 To November 26, 2024 Pre-bid Conference November 14, 2024 At 10:00 Am Ppeso Conference Room Deadline Of Submission Of Bids November 26, 2024 At 9:30 Am At Procurement Division Opening Of Bids In Sealed Envelope November 26, 2024 At 10:00 Am At Ppeso Conference Room A) Eligibility Requirements And Technical Proposal November 26, 2024 At 10:00 Am At Ppeso Conference Room B) Financial Proposal November 26, 2024 At 10:00 Am At Ppeso Conference Room 4. Prospective Bidders May Obtain Further Information From Provincial Government Of Oriental Mindoro-procurement Division And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024 To November 26, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Provincial Government Of Oriental Mindoro-procurement Division Will Hold A Pre-bid Conference On November 14, 2024 At 10:00 Am At Ppeso Conference Room, Provincial Capitol Complex, Camilmil Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Procurement Division, On Or Before November 27, 2024 At 9:30 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024 At 10:00 Am At Ppeso Conference Room, Provincial Capitol Complex, Camilmil Calapan City Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Pgom – Procurement Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marissa O. Acuzar Procurement Division – Goods And Services Provincial Capitol Complex Camilmil, Calapan City Oriental Mindoro 5200 Antonio M. Magnaye, Jr. Bac Chairperson

Details: Sources Sought Market Survey w912hv-24-z-0010 conversion Of Building Secure Working Area, Okinawa, Japan introduction: the U.s. Army Corps Of Engineers, Japan District (poj), Is Performing Market Research For A Design-bid-build (dbb) Construction Project. This Announcement Represents A Market Survey That Is Intended For Planning Purposes Only. The Purpose Of This Notice Is To Identify Sources Capable Of Performing This Project And To Receive Responses From Those Firms To Assist The Government's Acquisition Planning. This Survey Does Not Constitute A Commitment By The Government For Any Follow-on Announcements, Solicitation, Or Award. This Notice Is Not A Solicitation. The Government Will Not Pay For Any Information Provided As A Result Of This Market Survey. we Are Committed To Partnering With Industry To The Extent Possible Throughout This Process And Therefore Encourage All Interested Companies To Respond To This Sources Sought Inquiry. Market Research And Industry Feedback Is An Essential Part Of The Acquisition Process. The Information Requested In This Announcement Will Be Used Within Usace-jed To Facilitate Decision-making And Will Not Be Disclosed Outside The Agency. However, Respondents Submitting Business Information Pursuant To This Sources Sought/rfi Announcement Should Consult 41 C.f.r. Parts 105-60 And Other Implementing Regulations Concerning The Release Of Such Information To Third Parties Under The Freedom Of Information Act (foia). All Information Submitted By Respondents That They Consider Confidential And Not Releasable To Third Parties Outside Of Usace, And Its Employees, Agents, Consultants, And Representatives, Must Be Clearly And Conspicuously Marked. system For Award Management (sam) all Interested Companies, Including Joint Ventures, Shall Be Registered In The Sam Database In Order To Be Eligible For Award Of Government Contracts. Https://www.sam.gov offeror Information. Usace Intends To Ask All Prospective Contractors Demonstrate Capabilities With Meeting Construction Requirements Which Implement Intelligence Community Directive (icd) 705 Technical Specifications For Construction And Management Of Sensitive Compartmented Information Facilities (scif). This Contract Will Be Performed In Its Entirety In The Country Of Japan. The U.s. Government Will Offer “united States Official Contractor” Status Under Article Xiv Of The Us-japan Status Of Forces Agreement (sofa) To U.s. Contractors Normally Resident In The United States. ---------------------------------------------------------------------------------------------------------------- project Information project Title: Conversion Of Building To Secure Working Area project Location: Okinawa, Japan product Service Code (psc): Z1jz – Maintenance Of Miscellaneous Buildings naics Code: 236220 – Commercial And Institutional Building Construction project Magnitude: Between $10,000,000 And $25,000,000 (dfars 236.204) project Description: This Project Will Provide Conversion Of Approximately 2,600 Square Feet Of A Single Level Above Ground Building To Meet Secure Working Area Specifications. work Includes All Labor, Transportation, Materials, Equipment, And Supervision Necessary To Accomplish Various Construction, Demolition, Repairs, Alterations, And Associated Incidental Environmental Work (including But Not Limited To Asbestos, Lead-based Paint, Mold, Pcbs, Site Contamination, Etc.) To This U.s. Government Facility Located Within Japan, By Means Of This Design-bid-build (d-b-b) Contract. estimated Period Of Performance: 575 Calendar Days proposed Procurement Method: The Government Anticipates The Issuance Of A Request For Proposal (rfp) Solicitation Between January And March Of 2024. submission Requirements For Responses To This Market Survey: Interested Sources Are Requested To Answer The Questions In The Attached ‘w912hv-24-z-0010_sources Sought Capabilities Survey’ And Email The Completed Form To The Following Individuals No Later Than Close Of Business On 17 November 2023 (eastern Time). We Appreciate Your Honest Feedback In Helping To Develop An Effective Acquisition Strategy That Is Advantageous For All Interested Parties. contracting Officer – Jack T. Letscher At Jack.t.letscher@usace.army.mil contract Specialist - H. Christine Allen At Heather.c.allen@usace.army.mil additional Information contracting Office Address: japan District, U.s. Army Corps Of Engineers rm. 116, Bldg. 364, Camp Foster chatan-cho, Okinawa-ken 904-0100 japan

Details: Description The Bids And Awards Committee Of The City Of Dasmariñas Invites Interested Bidders To Submit Price Quotations For The Following: Joshbac2024 Pr No.: 24 11 3409 1. Thhn #12…………………………………………………1 Box 2. Pvc ½ Orange…………………………………………16 Pcs. 3. Elbow ½ Short……………………………………….30 Pcs. 4. Metal Clamp ½ (single)………………………………….50 Pcs. 5. Tox Screw #16……………………………………50 Pcs. 6. Breaker 20amp……………………………………1 Pc. 7. Electrical Tape Big……………………………………1 Pc. 8. Breaker 15amp Bolt……………………………………..1 Pc. 9. Nema 3r Bolt-on…………………………………………1 Pc. 10. Bushing Reducer 1 ¼ X ¾……………………………..1 Pc. 11. Male Adaptor Ppr…………………………………2 Pcs. 12. Pvc ½ Blue……………………………………….16 Pcs. 13. Pvc ¾ Blue……………………………………………..2 Pcs. 14. Coupling Reducer ¾ X 1………………………………………..4 Pcs. 15. Elbow ½ Plain…………………………………..20 Pcs. 16. Elbow ¾ Blue………………………………………..10 Pcs. 17. Tee ½ Blue………………………………………10 Pcs. 18. Tapelon Big……………………………………..15 Pcs. 19. Neltex 400cc……………………………1 Pc. 20. Coupling Reducer ¾ X 1/2 ………………………………….4 Pcs. 21. Gate Valve 1/2 …………………………………..2 Pcs. Pr No.: 24 11 3410 1. Welding Rod……………………………………………….1 Kl. 2. Lacquer Thinner………………………………………….1 Btl. 3. Door Hanger………………………………………………….2 Sets 4. Tubular 2x2…………………………………………..3 Pcs. 5. Tubular 1x1……………………………………6 Pcs. 6. Tubular ¾ X 3/4 …………………………………………….13 Pcs. 7. Square Bar 12mm Red………………………………19 Pcs. 8. Cylindrical ¾…………………………………..5 Pcs. 9. Flat Bar ¼ X 1……………………………………………1 Pc. 10. Sliding Roller (railing) 8ft………………………………………2 Pcs. 11. Cutting Disc……………………………………..15 Pcs. 12. Epoxy Gray…………………………………………1 Gal. 13. Baby Roller…………………………………….2 Pcs. 14. Paint Brush 1 ½………………………………..2 Pcs. 15. Shera 3/16………………………..2 Pcs. 16. Metal Furring………………………………4 Pcs. 17. Rivets 1/8 X ¾…………………………………1 Box 18. Drill Bit 1/8……………………………………………..2 Pcs. Pr No.: 24 11 3405 1. A/b Epoxy…………………………………1 Ltr. 2. Bidet…………………………..1 Pc. Pr No.: 24 11 3430 1. Coupling Male Adaptor ¾………………………………….8 Pcs. 2. Coupling Male Adaptor ½………………………………….4 Pcs. 3. Elbow ½ Ppr……………………………..15 Pcs. 4. Elbow ¾ Ppr…………………………….15 Pcs. 5. Tee ½ Plain Ppr……………………………….5 Pcs. 6. Ppr ½……………………………..4 Pcs. 7. Ppr ¾……………………………………..4 Pcs. 8. Check Valve ¾……………………………….2 Pcs. 9. Coupling ¾ X 1/2 ……………………………………5 Pcs. 10. Gate Valve ¾……………………………………………2 Pcs. 11. Onion Patente ¾……………………………………….2 Pcs. 12. Tee Plain ¾ Ppr……………………………………5 Pcs. 13. Bushing Reducer ¾ X 1 ¼……………………………….2 Pcs. 14. Bushing Reducer ¾ X 1 ½………………………………….. 2 Pcs. 15. Bushing Reducer ¾ X ½……………………………2 Pcs. 16. Bushing Reducer ¾ X 1……………………………….2 Pcs. 17. Bushing Reducer 1 X ½………………………..2 Pcs. 18. Bushing Reducer ¾ X 1……………………………….2 Pcs. 19. Bushing Reducer ¾ X ½…………………………………………2 Pcs. 20. Cutting Disc…………………………………..2 Pcs. 21. Welding Rod……………………………….1/4 Kl. Special Instructions: 1. Please Click The Associated Components For The Checklist Of Documentary Requirements. 2. Request For Quotation Form Will Be Issued By The Bac Secretariat From November 14, 2024 To November 20, 2024 After Paying The Corresponding Bid Docs Fee Amounting To Five Hundred Pesos (php500.00). 3. Deadline Of Submission Of Proposal Is On November 20, 2024, 10:00 A.m. At The Bac Secretariat Office, 2nd Floor, City Hall Of Dasmariñas. Late Bids Shall Not Be Accepted. 5. Opening Of Price Quotations Is On November 20, 2024, 11:00 A.m. At The Bac Secretariat Office, 2nd Floor, City Hall Of Dasmariñas. 6. The Proposal Together With The Documentary Requirements Of The Bidder Should Be Placed In A Long Brown Envelope, Properly Sealed, Labelled And Addressed To The Bac.

Details: Description 1. 10 Pcs. - Adjustable Squeegee Alloy W/ Handle W/ Foam For Glass Cleaning 2. 100 Btls. - Airfreshener (320 Ml) 3. 300 Pcs. - Bath Soap (25 Grms) 4. 600 Pcs. - Bath Soap, Anti Bacterial, 85 Grams 5. 20 Pairs - Battery (aa) 6. 50 Pairs - Battery (aaa) 7. 1000 Btls. - Bottled Water (500ml) 8. 50 Btls. - Bottled Water (6 Liters) 9. 5 Cans - Car Gel, Fresh Lemon, 70 Grams 10. 20 Packs - Coffee (200 Grms) 11. 400 Pcs. - Coffee (3in1 Original, Twin Pack) 12. 20 Packs - Coffee Creamer (450 Grms) 13. 25 Bots. - Colorsafe Liquid Bleach 900ml. (violet Color) 14. 625 Packs - Detergent Powder, Antibac., 550 Grams 15. 3325 Sachet - Dishwashing Liquid, Anti Bacterial, 50ml 16. 70 Pads - Dishwashing Sponge W/ Stripping Pad, Heavy Duty 17. 30 Btls. - Dishwashing Liquid (250ml) 18. 100 Pcs. - Door Mat Cloth, Heavy Duty 19. 300 Pcs. - Fabric Conditioner (800ml) 20. 1100 Sachet - Fabric Conditioner, Antibac, 38ml. 21. 150 Packs - Garbage Bag Black M (11 X 11 X 24) 100's 22. 150 Packs - Garbage Bag Black Xxl (18.5 X 18.5 X 40) 100's 23. 80 Packs - Garbage Bag Green M (11 X 11 X 24) 100's 24. 100 Packs - Garbage Bag Green Xxl (18.5 X 18.5 X 40) 100's 25. 125 Packs - Garbage Bag Yellow M (11 X 11 X24) 100's 26. 114 Packs - Garbage Bag Yellow Xxl (18.5 X 18.5 X 40) 100's 27. 1000 Pcs. - Garbage Bag, Black (13x13x30) 28. 1000 Pcs. - Garbage Bag, Black (15x15x30) 29. 2000 Pcs. - Garbage Bag, Black (18.5x18.5x40) 30. 20 Btls. - Glass Cleaner (500 Ml) 31. 30 Btls. - Insecticide Spray (500 Ml) 32. 50 Gals - Laundry Disinfectant Liquid (color Safe, 1 Gal.) 33. 50 Gals - Laundry Disinfectant Liquid (original, 1 Gal.) 34. 200 Kgs. - Laundry Soap Powder (1 Kg/bag) 35. 10 Pcs. - Lavatory Flexible Hose (1/2 X 1/2 X 12) 36. 50 Pcs. - Led Bulb (9w Daylight) 37. 90 Gals - Liquid Bleach, Floral Scent (3.785l) 38. 50 Btls. - Liquid Laundry Soap (1 Liter) 39. 3 Gals - Metal Primer Paint (gray Oxide 4ltr./gal.) 40. 125 Pcs. - Mop Head Cloth (strip Cloth) 41. 25 Sets - Mop With Handle & Head Cloth, Interchangeable 42. 50 Packs - Paper Cups (50pcs/pack) 43. 50 Pads - Scouring Pads W/ Sponge (5m) 44. 300 Pcs. - Shampoo (4in1/sachet) 45. 110 Pcs. - Softbroom, Thick, Heavy Duty 46. 25 Pcs. - Stick Broom, Thick, Heavy Duty 47. 100 Pads - Stripping Pad 1" Thick, Heavy Duty, Branded 48. 20 Kls. - Sugar (1kg) 49. 20 Pcs. - Toilet Bowl Brush, Steel Handle, Round Brush, Heavy Duty 50. 100 Btls. - Toilet Bowl Cleaner (500ml) 51. 300 Pcs. - Toilet Deodorizer, Lemon, 100 Grams 52. 500 Rolls - Toilet Paper 2 Ply, Individually Pack 53. 25 Pcs. - Toilet Pump, Rubber With Handle, Heavy Duty 54. 20 Btls. - Wood Polisher X-x-x

Details: Description City Of Lapu-lapu City General Services Office Bill Of Quantities Delivery Period : Philgeps Reference No. : Title : Purchase Of Advance Life Support (als) And Nursing Manikins For Training On Defibrillation, Airway Management, Tracheostomy, Als Pediatric Trainer, Patient Care - Multi-venus Trainer Abc : Php 1,500,000.00 P.r. No. : 24-06-0830 P.r. Date : 06/25/24 Office : Local Disaster Risk Reduction Management Fund Abc : Php 1,500,000.00 No. Qty. Unit Item Description Brand Unit Cost Total Cost 1 1 Unit "childbirth Simulator, Details: It May Be Used For Demonstration Of The Following Obstetric Procedures: - Normal Vaginal Delivery, Complete, Frank, And Footling Breech Birth - C-section Delivery, Ritgen;s Maneuver, Episiotomy - Vertex Presentation, Intrauterine Manipulation - Vertex/vertex, Vertex/breech, Breech/vertex, Or Breech/breech Presentation In Multiple Birth - Prolapse Of Umbilical Cord, Demonstration Of Placenta Previa: Total,partial, And Marginal - Normal Delivery Of Umbilical Cord And Placenta, Palpation Ff Fetal Fontanelles - Simulated Suction Of Nose And Moth Features: - Removable Diaphragm End Plate For Manual Positioning Of Fetal Baby/babies - Removable Stomach Cover For Positioning Fetus - Life-size Pelvic Cavity With Major Anatomic Landmarks - Hand-painted Outline Of The Bony Pelvis - Three Soft Vulval Inserts For Episiotomy Exercises - One Baby Boy And Baby Girl, Each With Umbilical Cord And Placenta - Anatomically Accurate Backbone And Fontanelles On Fetal Baby/babies - One Skin-tone Stomach Cover, One Clear Stomach Cover - Four Extra Umbilical, Two Umbilical Clamps - Talcum Powder, Instruction Manual, Soft Carrying Bag" 2 3 Set "cpr Manikin (adult, Junior, Baby), A. Adult Cpr Manikin Component Of Each Set: - Main Manikin Unit (1) - Face Skin (1) - Artificial Lung (1) - Face Shield (10) - Mat Bag (1) - Battery (aa-type) (6) - Instructions For Use (1) - Displays Visual Flow Of Blood From The Heart To The Brain - Oral And Nasal Passages Which Allow Realistic Nose Pinch - Head Tilt And Chin Lift For Opening Airway - Highly Realistic Chest Movement With Correct Ventilations - Can Be Used With An Adult Bvm - Air Vent Reduces The Risk Of Cross Contamination From Exhaled Air B. Junior Cpr Manikin Component Of Each Set: - Main Junior Manikin Unit (1) - Face Skin (1) - Artificial Lung (1) - Face Shield (10) - Mat/carry Bag (1) - Battery (aa-type) (6) - Instructions For Use (1) - Displays Visual Flow Of Blood From The Heart To The Brain - Oral And Nasal Passages Which Allow Realistic Nose Pinch - Head Tilt And Chin Lift For Opening Airway - Highly Realistic Chest Movement With Correct Ventilations - Can Be Used With An Adult Bvm - Air Vent Reduces The Risk Of Cross Contamination From Exhaled Air - Excellent For Pediatric Bls Instruction C. Baby Cpr Manikin Component Of Each Set: - Ventilation 'double' Filter For Artificial Lung (1) - Artificial Lung (multiple Time Usable) (1) - Face Shield (1) - Pants (1) - Blanket (1) - Carry Bag (1) - Instructions For Use (1) -batteries (alkaline Aa Type) (4) - Displays Visual Flow Of Blood From The Heart To The Brain - Chest Compression Depth And Speed Measuring Sensor - Chest Movement And Visual Feedback With Ventilation - Head Tilt And Chin Lift For Opening Airway - Jaw-thrust Maneuver Terms; - Should Be With Cpr ( Certificate Of Product Registration) - 1 Year Warranty Delivery Terms: - 30 Working Days Upon The Issuance Of Purchase Order" I Hereby Certify That The Above Quoted Price Of Each Article Is True And Correct And I Bind Myself To Deliver The Same To The City Of Lapu-lapu Upon Receipt Of Notice Of Said Purchased Order. Note: This Prio-forma Forms Part Of The Paid Tender Documents And Will Be Made As One The Basis For Clarification Form The Interested Bidders/suppliers And Eventually The Modification Of The Statements/provisions In The Invitations To Bid.

Details: Description Invitation To Bid 1. The Government Of Barangay Ambiong La Trinidad Through The 20% Barangay Development Fund 2024 Intends To Apply The Sum Of Four Hundred Seventy Eigth Thousand Five Hundred Seven Pesos And Twenty Cents (php 478,507.20) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Projects. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Of Ambiong La Trinidad, Benguet Invites Bids For The Following Project: A. Contract Reference No. Pow - 1041 – 2024-amb-10b Name Of Project Improvement Of Barangay Multi-purpose Hall Project Location Ambiong, La Trinidad, Benguet Approved Budget For The Contract (abc) Php 478,507.20 Source Of Fund 20% Barangay Development Fund Fy 2024 Contract Duration 32 Days From Receipt Of Notice To Proceed Brief Description 1. Project Signage 2. Site Works 3. Flooring And Tile Works 4. Steel Storage, Pipe, Water Closet And Doors 5. Chb Walling, Paintings And Electrical Wirings 6. Septic Vault Equipment Requirements 1 Unit Mini Dump Truck 1 Unit Bar Bender 1 Unit Concrete Driller 1 Unit Welding Machine 1 Unit Speed Cutter 1 Lot Minor Tools 3. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, (instructions To Bidders). 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Of The Barangay Ambiong La Trinidad, Benguet And Inspect The Bidding Documents At The Barangay Ambiong Multi-purpose Hall 2nd Floor Barangay Ambiong, La Trinidad, Benguet From 9:00am To 11:00am Mondays To Fridays. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13-20 ,2024 At Bac Office, 2nd Floor Barangay Ambiong La Trinidad, Benguet And Upon Payment Of A Non-refundable Fee For The Bidding Documents On Each Project In The Amount Of Five Hundred Pesos Only. (php 500.00). 7. The Barangay Ambiong Of La Trinidad, Benguet Will Not Have A Pre-bid Conference. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac Office, 2nd Floor Barangay Hall Of Ambiong, La Trinidad, Benguet On Or Before November 20, 2024 At 11:00am. Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 10. Bid Opening Shall Be On November 20 , 2024 At 1:00pm At The Bac Office, 2nd Floor Barangay Hall Ambiong La Trinidad, Benguet Bids Will Be Opened In The Presence Of The Bidders Representatives Who Chose To Attend The Activity. 11. The Barangay Ambiong, La Trinidad, Benguet Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Kag. Sonny C. Torres Head Bac Secretariat Bids And Awards Committee Office 2nd Floor Barangay Hall Ambiong La Trinidad , Benguet Telefax No.: (074) 4240-822 E-mail Address: Ambionglatrinidad@gmail.com Approved: Noted: (sgd.) Hector Q. Chamos Bac Chairperson (sgd.) Frederick M. Tao-ing Jr. Head Of The Procuring Entity