Painting Tenders

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: Description Republic Of The Philippines Province Of Davao Del Sur Municipality Of Santa Cruz -ooo- Bids And Awards Committee Invitation To Bid For The Procurement Of 1 Lot Electrical Supplies For The Construction/installation Of Service Entrance And Electrical Power Line (underground) (itb No. 122-goods-2024) 1. The Local Government Unit Of Sta. Cruz, Davao Del Sur, Through The General Funds For The 2024 Intends To Apply The Total Sum Of Five Hundred Eighty Four Thousand One Hundred Twenty (₱584,120.00) Pesos Being The Total Abc To Payments Under The Contract For The Procurement Of 1 Lot Electrical Supplies For The Construction/installation Of Service Entrance And Electrical Power Line (underground) (itb No. 122-goods-2024) To Wit: Item No. Qnty. Unit Of Issue Item Description Unit Cost Approved Budget For The Contract 1 Lot Electrical Supplies For Construction/installation Of Service Entrance And Electrical Power Supply Line (underground) 1 1 Lngth G.i. Pipe # 2" Dia. S-40 2,600.00 2,600.00 2 3 Sets Secondary Rack With ( 3-spool ) 850.00 2,550.00 3 2 Pcs. Entrance Cap # 1 1/4" 160.00 320.00 4 45 Lngths Pvc Pipe #1 1/ 4"ø 250.00 11,250.00 5 4 Cans Pvc Solvent 400cc 480.00 1,920.00 6 16 Pcs Pvc Elbow # 1 1/4"ø 90° 130.00 2,080.00 7 1 Lngth G.i. Pipe # 3" Ø, S-40 3,700.00 3,700.00 8 1 Pc Conduit L.b. #1 1/ 2"ø 320.00 320.00 9 2 Lngths Rsc Pipe # 1 1/2"ø 1,100.00 2,200.00 10 2 Sets Locknut And Bushing # 1 1/2"ø 195.00 390.00 11 1 Pc. Conduit Coupling # 1 1/2" 80.00 80.00 12 20 Pcs. Metal Clamp # 1 1/4" 55.00 1,100.00 13 20 Pcs. Metal Clamp # 1 1/2" 65.00 1,300.00 14 10 Pcs Solderless Connector # 4 740.00 7,400.00 15 5 Pcs. Pull Box # 6 X 12 X 12 1,150.00 5,750.00 16 10 Rolls Electrical Tape (big) 80.00 800.00 17 10 Rolls Rubber Tape (big) 190.00 1,900.00 18 1 Unit Free Standing Panel Board In Nema-1 Enclosure ,g.i. Sheet, Gauge-16 With Powder Coated Paint 17,500.00 17,500.00 19 70 Lngths Pvc Pipe # 1 1/2"ø 360.00 25,200.00 20 25 Pcs Pvc Elbow # 1 1/2"ø 90° 160.00 4,000.00 21 5 Kls Tie Wire #16 110.00 550.00 22 10 Kls Tie Wire #12 215.00 2,150.00 23 300 Mtrs. 30.0mm² Thhn-2/thw Strd. Wire 620.00 186,000.00 24 110 Mtrs. 80.0mm² Thhn-2/thw Strd. Wire 920.00 101,200.00 25 300 Mtrs. 22.0mm² Thhn-2/thw Strd. Wire 280.00 84,000.00 26 60 Mtrs. 60.0mm² Thhn-2/thw Strd. Wire 750.00 45,000.00 27 10 Pcs Twin Bolt Connector # 80 Mm 760.00 7,600.00 28 8 Pcs Expansion Bolt # 3/8 120.00 960.00 29 1 Unit Nema3r Enclosure With Tqd 200 Amperes Circuit Breaker, 3-pole 14,500.00 14,500.00 30 1 Unit Nema3r Enclosure With Tqd 225 Amperes Circuit Breaker,2-pole 7,500.00 7,500.00 31 2 Pcs Cutting Wheel (masonry) 750.00 1,500.00 32 80 Bags Portland Cement 275.00 22,000.00 33 15 M³ Coarse Sand 1,100.00 16,500.00 34 30 Pcs. Chb # 4" 15.00 450.00 35 10 Lngths Drb #10 185.00 1,850.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Sta. Cruz, Davao Del Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within One (1) Day From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Secretariat Office At 2nd Floor, Left Wing, New Municipal Hall Building, Escandor Road, Municipality Of Sta. Cruz, Davao Del Sur And Inspect The Bidding Documents At The Address During Weekdays Starting From 8:00 O’clock In The Morning To 5:00 O’clock In The Afternoon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 19, 2024 From The Given Address Below And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand (1000.00) Pesos. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before 9:30 O’clock In The Morning December 27, 2024. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On 9:40 O’clock In The Morning Of December 27, 2024 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Local Government Of Unit Of Sta. Cruz, Davao Del Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Ommi Kharsom L. Buat Bac Secretariat Left Win, 2nd Level, New Municipal Hall Local Government Center, Zone Iii, Sta. Cruz, Davao Del Sur. 09107650089 - E-mail Address:bac5stacruz@gmail.com Engr. Ray R. Sealana Bac Chairperson, Masso

Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental 2nd District Engineering Office Balase St., El Salvador City, Misamis Oriental Region X Invitation To Bid For 24kl0128 - Construction Of Multi-purpose Building, Barangay Poblacion, Opol, Misamis Oriental "1. The Department Of Public Works And Highways – Misamis Oriental Second District Engineering Office, Through The Nga The National Expenditure Program (nep) Intends To Apply The Sum Of P99,000,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 24kl0128 - Construction Of Multi-purpose Building, Barangay Poblacion, Opol, Misamis Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening." "2. 2. The Department Of Public Works And Highways – Misamis Oriental Second District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works:" Name Of Contract: Construction Of Multi-purpose Building, Barangay Poblacion, Opol, Misamis Oriental Contract Id: 24kl0128 Location: Opol, Misamis Oriental Scope Of Works: Construction Of Multi-purpose Building Includes Excavation, Soil Poisoning, Structural Concrete, Cement Plaster Finish, Tiles, Paints, Railings, Ceiling, Steel Column, Plumbing Electrical And Mechanical Works. Complete As Shown On Plan Approved Budget For The Contract: ₱99,000,000.00 Contract Duration: 360 "3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Medium A, Medium B, Large A, Large B, (2) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (3) Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph." 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Misamis Oriental 2nd District Engineering Office And Inspect The Bidding Documents At Balase St., El Salvador City During Weekdays From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 12, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 500.00 For Abc Costing 500,000 And Below; Php 1,000.00 For Abc Costing More Than 500,000 Up To 1m; Php 5,000.00 For Abc Costing More Than 1m Up To 5m; Php 10,000.00 For Abc Costing More Than 5m Up To 10m; Php 25,000.00 For Abc Costing More Than 10m Up To 50m; Php 50,000.00 For Abc Costing More Than 50m Up Tp 500m; Php 75,000.00 For Abc Costing More Than 500m. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Misamis Oriental 2nd District Engineering Office Will Hold A Pre-bid Conference On December 19, 2024 @ 1:00pm At Misamis Oriental 2nd Deo Conference Room, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. "in Accordance With The Department's Citizen's Charter (attached As Annex ""a"") And Unnumbered Memorandum Dated December 27, 2001 (attached As Annex ""b""), Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary C. Letter Of Intent (for Foreign Funded Projects) " 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_misamisoriental2 For Electronic Submission On Or Before December 31, 2024 @ 1:00 Pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. "11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. " 12. Bid Opening Shall Be On December 31, 2024 At 1:00 Pm After Convening Of The Bac At Misamis Oriental 2nd Deo Conference Room And Through Live Streaming: Dpwh Misamis Oriental 2nd Deo Https://youtube.com/@dpwhmisor2nddeo?si=ccqqnwdlsenfa3zn . Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. "13. In Consistent Of The Do 127 S 2018, “if At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid”." 14. The Misamis Oriental 2nd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 15. For Further Information, Please Refer To: Ryan S. Dy Harry A. Rapliza Chief, Quality Assurance Section Engineer Ii Bac Chairperson Bac Secretariat Head Misamis Oriental 2nd Deo Misamis Oriental 2nd Deo 74215 74217 Dy.ryan@dpwh.gov.ph Rapliza.harry@dpwh.gov.ph " For Downloading Of Bidding : Www.philgeps.gov.ph Documents : Www.dpwh.gov.ph For Online Bid Submission : Electronicbids_misamisoriental2@dpwh.gov.ph " December 12, 2024 Approved By: Ryan S. Dy . Chief, Quality Assurance Section Bac Chairperson

Details: Description 1. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Through The Cy-2025 National Expenditure Program (nep) Intends To Apply The Sum Of One Million Six Hundred Seventy & 00/100 (php 1,670,000.00) Being The Abc To Payments Under The Contract For Cy-2025 Procurement Of Farm Machineries & Equipments (mechanical Flat Bed Dryer) For Rice Production Through Crfpsp – Crfps Project For Baparco – Batong Paloway, San Andres, Catanduanes (darcat-pb-epa2025-015). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Fme Price /unit Total Price 1 1 Unit – Mechanical Flat Bed Dryer Php 1,670,000.00 Php 1,670,000.00 Specifications: Furnace: • Direct Fired Made Refractory Bricks Or Its Equivalent • Able To Resist Heat Of At Least 800 Celsius • Gravity Type Feeding Mechanism • Multi Fuel Capacity Which Uses Biomass As Fuel Including Cracked Pili Nut Shell, Corn Hub & Rice Hull Blower And Engine: • Axial Blower Driven By At Least 14 Hp Diesel Engine, Single Cylinder • Water Cooled; Manual/hand Cracked Starting • Dynamically Balanced With Appropriate Bearings And Shafting With Belt. Concrete Flooring: • Concrete Flooring/slab • Class A Mixture With At Least 100 Mm Thick • 10 Mm Rsb Reinforcement Spaced At 80 Cm. Drying Bin: • Made Of Reinforced Concrete Walling With A Minimum Of 100 Mm Thickness • 8 Mm Rsb Reinforcement Spaced At Minimum Of 150 Mm • Inside Dimension Of Bin: Width=12 Ft, Length=24 Ft. • Total Bin Height= 1500 Mm • Height Of Plenum= 1040 Mm • Holding Depth Of 450 Mm With Gauge 18 Perforated Metal Floor Having At Least • 2.54 Mm Perforation With Complete Bagging Ports (at Least 4) • Adequately Supported With Frames And Braces To Withstand 6 Tons Rice Or Corn. • Equipped With Heavy Duty Dial And Probe Type Thermometer Range Of 0-100 C Shed: • Stand-alone Type Shed • Roofing Sheets Made Of Brand New Pre-painted Corrugated Sheet With 0.25 Mm Thk. • Roofing Sheets Shall Be Connected To The Steel Purlins By Using Self-tapping Roof Metal Screws(tekscrew) • Steel Columns With Total Of Ten (10) Columns To Cover The Concrete Flooring • Angle Bar For Trusses With 2 Pcs-75mm X 50 Mm X 6.5mm & C-channel Purlins With 75mm X 75mm X 6.5mm Agitator: • Chain Driven W/ 60-60 Chain & Sprocket • Powered By 5.5 Hp Air-cooled Gasoline Engine Package Inclusion: • 1 Unit Grain Moisture Meter Specs: 1. Measurement Range: 5-40% Moisture Content (mc) 2. Accuracy: ±0.5% Mc (in The Range Of 5-25% Mc) 3. Repeatability: ±0.2% Mc 4. Grain Temperature Range: -20°c To 80°c (-4°f To 176°f) 5. Sample Size: 100-500 Grams (3.5-17.6 Oz) 6. Measurement Method: Electrical Resistance 7. Display: Digital Lcd Display With Backlight 8. Units: % Mc 9. Power Supply: 220v Ac 10. Dimensions: Approximately 200x150x50 Mm (7.9x5.9x2 Inches) 11. Weight: Approximately 1-2 Kg (2.2-4.4 Lbs) Inclusions: • With Amtec Test Result • Conform To Paes 119-2001 & Paes 301:2020 • Warranty Duration:1 Year Warranty Of Whole Unit. • With Request Authority To Bid • Available In The Philippine Market W/ Attached Evidence & Must Have Service Center Within Region 5.with Approved Test From Manufacturer; With Reflectorized Sticker Printed With Dar Logo (3x3 Inches) & The Words “department Of Agrarian Reform -crfpsp Project” (2x12 Inches); Inclusive Of Field Testing, Demo On Operations & Maintenance, And On-site Delivery. • On Site Delivery; At Batong Paloway, San Andres, Catanduanes • Delivery Period: 60 Days Upon Receipt Of Notice To Proceed Total Abc: Php 1,670,000.00 Vat Inclusive 2. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By A Period Sixty (60) Days. Bidders Should Have Completed, Within At Least Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agrarian Reform (dar), Catanduanes Provincial Office And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours (8:00 Am To 5:00 Pm), Mondays Thru Fridays, Valid For The Duration That This Particular Bidding Activity Is Open From December 19, 2024 – January 7, 2025 Until 12:00 Noon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 19, 2024 – January 7, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, By Mail, Or Through Electronic Means. 6. The Department Of Agrarian Reform, Catanduanes Provincial Office Will Hold A Pre-bid Conference For This Particular Procurement On December 26, 2024, Thursday, 9:00 Am At Dar Catanduanes Provincial Office, Constantino (pob.), Virac, Catanduanes. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 7, 2025 Tuesday, Until 12:00 Noon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 Tuesday, 1:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office, Through The Provincial Bids & Awards Committee (bac) Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Ma. Katrina M. Sarausa Arpo I /head Bac Secretariat Department Of Agrarian Reform (dar) Catanduanes Provincial Office Brgy. Constantino (pob.), Virac, Catanduanes Cellphone Hotline: 09634442986 Email Address: Bacsec.catan@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website For Online Bid Submission: Bacsec.catan@gmail.com 18 December 2024 Atty. Cherry A. Agmata Bac Chairperson

Description: Contract notice – Sector Directive, Standard regulation Open procedure (construction work) Leipziger Strasse underground station fire protection – 8 lots Description of the overall construction project In the existing Leipziger Strasse underground station in Frankfurt am Main, Bockenheim district, a fire protection renovation of the entire station is being carried out by the Verkehrsgesellschaft Frankfurt am Main GmbH (hereinafter referred to as “VGF”). The fire protection and construction measures take place on the following levels of the station: A-level - above ground, access to the Leipziger Strasse underground station B-level - distribution level C-level - platform level C1-level - crawl space/technical level below C-level, room height 1.21m D-level - platform level D1-level - crawl space/technical level below D-level, room height 1.21m Simultaneous construction work Other companies will be working on the construction site at the same time as the work is being carried out. Coordination with the companies working on the construction site at the same time is required. The start of work depends on the completion of the respective area by the preliminary trades Lot 1: Electrical work Lot 2: Communications technology (bma) Lot 3: Extended shell work Lot 4: Metalwork Lot 5: Hkls conversion projects Lot 6: Contaminant remediation Lot 7: MSR Lot 8: Construction cleaning work Further tenders/notices are planned for the overall fire protection project on Leipziger Strasse: - Drywallers - Painters/plasterers - Door builders Lot 1: New L&K-communications technology-zlt building The tender includes the construction power and adaptation of the existing installation. The services carried out in the list of services include: - Upgrading of routes and new routes - Installation of lights on the platforms (C and D levels), public areas on levels B, C and D - Fire barriers in the area of the new cable routes - Installation of fire alarm components supplied by the customer - Cabling of the systems, incl. ZLT cabling - Installations in the technical rooms - Protection of the existing building structure for the duration of the construction work - Construction site lighting and construction power - Installation of loudspeakers - Expansion of the Saa control center - Installation of temporary protective measures for personal protection during the construction work - Adjustments to existing installations - Dismantling of old electrical equipment including fastening materials - Delivery and introduction of required materials to the installation site (horizontal and vertical paths within the station) must be factored into the unit prices - Connection work on electrical equipment - Preparation of documentation including evidence of lighting measurements - Production of functional operating systems in accordance with the current state of the art - Commissioning and acceptance of the new operating systems Lot 2: New construction of communications technology (bma) The tender includes the construction power and adjustment of the existing installation. The services carried out in the list of services include: - Installation of a fire alarm system Lot 3: Extended shell construction work The underlying list of services includes the extended shell construction work. The services listed in the scope of work include: - Providing and maintaining your own construction site equipment - Protecting certain TGA routes, built-in components (switch cabinets), furniture and surfaces - Demolition of door thresholds, masonry, wall tiles, drywall - Creating new masonry walls, door openings - Renewal of floor tiles after door replacement - Strengthening existing masonry in accordance with fire protection specifications - Renewal of an interior building expansion joint F90 - Reduction of wall openings - Creating a foundation for a base cabinet including adjustment of the sidewalk and tree border as well as delivery and assembly of a bench - Creating a house entry including laying empty pipes - Professional disposal of non-contaminated demolition material The working height is up to approx. 4.00 m Lot 4: Metalwork The underlying scope of work includes the metalwork. The services listed in the scope of work include: - Provision and maintenance of your own construction site equipment - Cordoning off your own work area in the public area of the station - Demolition of ceiling sails as part of a station closure - Demolition of metal ceiling paneling - Manufacturing, delivery and installation of smoke curtains including the associated drywall aprons - Manufacturing, delivery and installation of ceiling paneling sheets Lot 5: Fire protection renovation of plumbing / fire extinguishing / ventilation The underlying scope of work includes the work of the plumbing, fire extinguishing and ventilation trades. The services listed in the scope of work include: - The repeated decommissioning of the existing ventilation system for work on the BSKs - The cleaning of the ventilation ducts in the area of the removed BSKs up to 2.00 m in length - The preparation of the openings created for the installation of new BSKs - The installation of new BSKs - The installation of new BSKs as overflow openings - The connection of new BSKs to the existing ventilation installation - The dismantling and renewal of the existing insulation - The retrofitting of a few BSKs with an AS-I module and a motor - Various small-scale adaptation work on the existing ventilation installation - The fire protection upgrade of pipe penetrations - The installation of protective and barrier measures for the aforementioned work - The installation of a split refrigeration unit for a technical room - The installation of a fire extinguishing separation station Lot 6: Pollutant remediation Main measure The underlying scope of work includes This includes the remediation of pollutants and dismantling of fire dampers and fire doors on levels B, C and D, as well as in the public area of the station. The services listed in the scope of work include: - Provision and maintenance of our own construction site equipment - Erection of locks and film sealing of areas in accordance with TRGS519 - Dismantling of fire dampers in accordance with TRGS519 and DGUV 201-012 BT58 procedures - Dry cleaning (vacuum extraction) and wet cleaning of areas in accordance with TRGS519 - Visual acceptance by the contractor and clearance measurement by an external company. - Dismantling of the sealing areas. The working height is approximately 2.80m to 4.00m. The work is taking place during a closure and rail operations in the station. Work cannot be carried out continuously to carry out the services in the underlying scope of work. Subsequent trades such as ventilation construction and fire protection must also be taken into account in the schedule. For the pollutant remediation in the B, C and D levels for the following time frame: February 2025 - July 2028 Unrestricted use of the entire work area is possible. Lot 7: MSR The underlying list of services includes the work of the MSR trade. The services detailed in the scope of work include: - Disconnecting the existing cabling from the existing fire dampers and the central control cabinet prior to the asbestos remediation work (dismantling fire dampers) - Dismantling the existing cabling between the fire dampers and the central control cabinet in the ventilation center - Installing new ISP cabinets including the required components and internal cabling - Installing the new ASI cabling including laying systems - Connecting the new ASI cabling to the new fire dampers - Modifications to the existing control cabinet to meet the new requirements of the fire protection concept - Programming work In order to ensure compatibility with the existing ZLT/GLT, the components of the control cabinets are to be offered as product-specific products from Siemens. Lot 8: Building site cleaning work The underlying scope of work includes the building site cleaning work. The services listed in the list of services include: - Rough cleaning of the crawl space - Intermediate cleaning of public areas including stairwells, technical rooms and ancillary rooms during the construction period - Final cleaning of public areas including stairwells, technical rooms and ancillary rooms The working height is up to approx. 4.00m

Description: Contract notice – Sector Directive, Standard regulation Open procedure (construction work) Leipziger Strasse underground station fire protection – 8 lots Description of the overall construction project In the existing Leipziger Strasse underground station in Frankfurt am Main, Bockenheim district, a fire protection renovation of the entire station is being carried out by the Verkehrsgesellschaft Frankfurt am Main GmbH (hereinafter referred to as “VGF”). The fire protection and construction measures take place on the following levels of the station: A-level - above ground, access to the Leipziger Strasse underground station B-level - distribution level C-level - platform level C1-level - crawl space/technical level below C-level, room height 1.21m D-level - platform level D1-level - crawl space/technical level below D-level, room height 1.21m Simultaneous construction work Other companies will be working on the construction site at the same time as the work is being carried out. Coordination with the companies working on the construction site at the same time is required. The start of work depends on the completion of the respective area by the preliminary trades Lot 1: Electrical work Lot 2: Communications technology (bma) Lot 3: Extended shell work Lot 4: Metalwork Lot 5: Hkls conversion projects Lot 6: Contaminant remediation Lot 7: MSR Lot 8: Construction cleaning work Further tenders/notices are planned for the overall fire protection project on Leipziger Strasse: - Drywallers - Painters/plasterers - Door builders Lot 1: New L&K-communications technology-zlt building The tender includes the construction power and adaptation of the existing installation. The services carried out in the list of services include: - Upgrading of routes and new routes - Installation of lights on the platforms (C and D levels), public areas on levels B, C and D - Fire barriers in the area of the new cable routes - Installation of fire alarm components supplied by the customer - Cabling of the systems, incl. ZLT cabling - Installations in the technical rooms - Protection of the existing building structure for the duration of the construction work - Construction site lighting and construction power - Installation of loudspeakers - Expansion of the Saa control center - Installation of temporary protective measures for personal protection during the construction work - Adjustments to existing installations - Dismantling of old electrical equipment including fastening materials - Delivery and introduction of required materials to the installation site (horizontal and vertical paths within the station) must be factored into the unit prices - Connection work on electrical equipment - Preparation of documentation including evidence of lighting measurements - Production of functional operating systems in accordance with the current state of the art - Commissioning and acceptance of the new operating systems Lot 2: New construction of communications technology (bma) The tender includes the construction power and adjustment of the existing installation. The services carried out in the list of services include: - Installation of a fire alarm system Lot 3: Extended shell construction work The underlying list of services includes the extended shell construction work. The services listed in the scope of work include: - Providing and maintaining your own construction site equipment - Protecting certain TGA routes, built-in components (switch cabinets), furniture and surfaces - Demolition of door thresholds, masonry, wall tiles, drywall - Creating new masonry walls, door openings - Renewal of floor tiles after door replacement - Strengthening existing masonry in accordance with fire protection specifications - Renewal of an interior building expansion joint F90 - Reduction of wall openings - Creating a foundation for a base cabinet including adjustment of the sidewalk and tree border as well as delivery and assembly of a bench - Creating a house entry including laying empty pipes - Professional disposal of non-contaminated demolition material The working height is up to approx. 4.00 m Lot 4: Metalwork The underlying scope of work includes the metalwork. The services listed in the scope of work include: - Provision and maintenance of your own construction site equipment - Cordoning off your own work area in the public area of the station - Demolition of ceiling sails as part of a station closure - Demolition of metal ceiling paneling - Manufacturing, delivery and installation of smoke curtains including the associated drywall aprons - Manufacturing, delivery and installation of ceiling paneling sheets Lot 5: Fire protection renovation of plumbing / fire extinguishing / ventilation The underlying scope of work includes the work of the plumbing, fire extinguishing and ventilation trades. The services listed in the scope of work include: - The repeated decommissioning of the existing ventilation system for work on the BSKs - The cleaning of the ventilation ducts in the area of the removed BSKs up to 2.00 m in length - The preparation of the openings created for the installation of new BSKs - The installation of new BSKs - The installation of new BSKs as overflow openings - The connection of new BSKs to the existing ventilation installation - The dismantling and renewal of the existing insulation - The retrofitting of a few BSKs with an AS-I module and a motor - Various small-scale adaptation work on the existing ventilation installation - The fire protection upgrade of pipe penetrations - The installation of protective and barrier measures for the aforementioned work - The installation of a split refrigeration unit for a technical room - The installation of a fire extinguishing separation station Lot 6: Pollutant remediation Main measure The underlying scope of work includes This includes the remediation of pollutants and dismantling of fire dampers and fire doors on levels B, C and D, as well as in the public area of the station. The services listed in the scope of work include: - Provision and maintenance of our own construction site equipment - Erection of locks and film sealing of areas in accordance with TRGS519 - Dismantling of fire dampers in accordance with TRGS519 and DGUV 201-012 BT58 procedures - Dry cleaning (vacuum extraction) and wet cleaning of areas in accordance with TRGS519 - Visual acceptance by the contractor and clearance measurement by an external company. - Dismantling of the sealing areas. The working height is approximately 2.80m to 4.00m. The work is taking place during a closure and rail operations in the station. Work cannot be carried out continuously to carry out the services in the underlying scope of work. Subsequent trades such as ventilation construction and fire protection must also be taken into account in the schedule. For the pollutant remediation in the B, C and D levels for the following time frame: February 2025 - July 2028 Unrestricted use of the entire work area is possible. Lot 7: MSR The underlying list of services includes the work of the MSR trade. The services detailed in the scope of work include: - Disconnecting the existing cabling from the existing fire dampers and the central control cabinet prior to the asbestos remediation work (dismantling fire dampers) - Dismantling the existing cabling between the fire dampers and the central control cabinet in the ventilation center - Installing new ISP cabinets including the required components and internal cabling - Installing the new ASI cabling including laying systems - Connecting the new ASI cabling to the new fire dampers - Modifications to the existing control cabinet to meet the new requirements of the fire protection concept - Programming work In order to ensure compatibility with the existing ZLT/GLT, the components of the control cabinets are to be offered as product-specific products from Siemens. Lot 8: Building site cleaning work The underlying scope of work includes the building site cleaning work. The services listed in the list of services include: - Rough cleaning of the crawl space - Intermediate cleaning of public areas including stairwells, technical rooms and ancillary rooms during the construction period - Final cleaning of public areas including stairwells, technical rooms and ancillary rooms The working height is up to approx. 4.00m

Details: Description Section I. Invitation To Bid Da8-infra-2025-10 (pr No. Bt-25-infra-rice-39835-0008) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Rice 2025-current Fund Intends To Apply The Sum Of Six Million One Hundred Thirty-eight Thousand Six Hundred Ten Pesos And 53/100 Only (p6,138,610.53) Being The Approved Budget For The Contract (abc) To Payment For The Contract For “supply Of Labor And Materials For The Construction Of Warehouse Located At Brgy. San Pablo, Tabon-tabon, Leyte.” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Regional Field Office Viii Now Invites Bid For The Above Procurement Project. Completion Of Works Is Required Within One Hundred Eighteen (118) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii: Instruction To Bidders Qty Uom Desription Total Cost Supply Of Labor And Materials For The Construction Of Warehouse Located At Brgy. San Pablo, Tabon-tabon, Leyte P6,138,610.53 96 Sq.ft Signboard/billboard 1 I.s. Mobilization/demobilization And Temporary Shelter 600 Sq.m. Clearing And Grubbing 82.77 Cu.m. Structure Excavation 371 Cu.m. Embankment 8927.65 Kgs. Reinforcing Steel 130.12 Cu.m. Reinforced Concrete 1 I.s. Formworks And Falseworks 587.78 Sq.m. Masonry Works 1185.34 Sq.m. Cement Plaster Finish 348.18 Sq.m. Metal Structures 348.18 Sq.m. Prepainted Metal Roofing 61 Sets Aluminum Screen And Aluminum Glass Windows 1 Sets Doors 2 Sets Sliding Steel Door 1 I.s. Conduits, Boxes & Fittings 1 I.s. Wires & Wiring Devices 1 I.s. Power Load Center Switch Gear & Panel Board 13 Sets Lighting Fixtures 1 I.s. Solar Panel System 1185.34 Sq.m. Paintings 1 Lot Brass Marker Terms And Conditions: A During The Opening Of Bids, Bidders Shall: 1. Submit Certificate Of Project Site Inspection Issued By Farmer’s Association Or Barangay Officials Or Affidavit Of Site Inspection; 2. Submit Certificate Of Compliance To The Attached Drawings Duly Signed By The Bidder’s Authorized Representative And Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; B All Participating Bidder Must Comply With Section B Of Dpwh D.o. No. 197 Series Of 2016, Particularly In The Computation Ocm & Profit Of The Bid Amount. Use 12% For Vat Mark-up C During Post-qualification Evaluation 1. In Case Of Recomputed Bid, Bidder Shall Submit Its Revised Cost Estimates 2. Submit Pert/cpm And S-curve 3. Construction Methods 4. Manpower Schedule 5. Major Equipment Schedule 6. Provide Contractor's All Risk Insurance (cari) 7. Submit Plans, Design, And Specification Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; D Winning Bidder Shall: 1. Commence Construction Works Within Seven (7) Days Upon Receipt Of Notice To Proceed (ntp); 2. Complete The Construction Within 118 Calendar Days; 3. Provide Necessary Tools For The Satisfactory Completion Of The Project; 4. Assume Full Responsibility From The Time Project Construction Commences Up To The Final Acceptance By Darfo 8 And Shall Be Held Responsible For Any Damage In Part Or In Whole Except Those Occasioned By Force Majeure; 5. Assign A Project Engineer (either Licensed Agricultural Engineer Or Civil Engineer) That Will Oversee The Daily Construction Activities On Site; 6. Comply With The Quality Control Program (qcp) Schedule Of Minimum Testing Requirements Of The End-user; 7. Submit Material Test Report Or Its Equivalent Standard Certificate For Aggregate (sand & Gravel), And Cement 8. Submit Material Test Result From Accredited Testing Laboratory For Concrete, And Reinforcing Bar With Geotagged Photos, If Applicable; 9. Attend Pre-construction Meeting. 10. In Case Of Time Extension Due To Unworkable Weather Condition, Submit The Request With Pag-asa Weather Report And On-site Weather Chart Within The Succeeding Month. 11. Secure And Facilitate The Necessary Permits Required For The Project Implementation. 12. Strictly Observe Construction Safety Rules And Health Program Approved By Department Of Labor And Employment (dole) During Project Implementation. E Any Delay In The Project Completion Shall Be Subjected To Liquidated Damages Equivalent To At Least 1/10 Of 1% Of The Cost Of The Unperformed Portion Of The Works For Everyday Of Delay F Be Paid Through Partial Billing Based On Validated/verified Statement Of Work Accomplishment (swa) With Geo-tagged Photos On Major Works (before, During, And After) And Inspection Report By The Da-rfo8 Inspectorate Team. 1. At Least 30% Of The Physical Accomplishment; 2. At Least 50% Of The Physical Accomplishment; 3. At Least 75% Of The Physical Accomplishment; 4. 100% Of The Physical Accomplishment, Testing And Acceptance Of The Project G Advance Payment (maximum Of 15%) Will Be Granted Upon Submission Of The Following Requirements: 1. Advance Payment Bond By The Bidder 2. On-site Evaluation Report By The Da Project Engineer H Winning Bidder Shall Submit A Snapshot Of A Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Interested Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours, From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 12, 2024 To January 08, 2025 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents Amounting To Ten Thousand Pesos Only (p10,000.00), Pursuant To The Latest Guidelines Issued By The Gppb. 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On December 19, 2024 9:00 Am At Bac Office, Da-rfo8, Kanhuraw Hill, Tacloban City Through Face To Face Or Videoconferencing/webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 08, 2025, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 10. Bid Opening Shall Be On January 08, 2025, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity Either Physically Or Through Videoconferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Details: Description Item No. Description Quantity Unit 1. Excavation A. Trench (100mm Ø) , 1107 Lm (75mm Ø) , 148 Lm (50mm Ø) , 118 Lm B. Bellhole 24 M³ 2. Installation Of Upvc Pipes With Partial Backfilling, Compaction And Warning Tape (100mm Ø) , 1107 Lm (75mm Ø) , 148 Lm (50mm Ø) , 118 Lm 3. Installation Of Fittings And Other Materials A. Materials 100mm Ø X 90° C.l. Elbow, W/ Bng , 1 Pc. 100mm Ø X 178mm C.i. Sleeve-type Coupling W/ Bng (adapted To Upvc And Gi Pipe) , 1 Pc. 100mm Ø C.i. Tee, M/m/m, W/ Bng , 1 Pc. 100mm Ø X 45° Ci. Elbow, M/m , 8 Pcs. 100mm Ø X 11.25° Upvc Bend, Cl. 150 With Machine Installed Plastic Ring Homogenously Bonded With Rubber Ring , 2 Pcs. 100mm Ø X 22.5° Upvc Bend, Cl. 150 With Machine Installed Plastic Ring Homogenously Bonded With Rubber Ring , 1 Pc. 75mm Ø X 22. 5° Upvc Bend, Cl. 150 With Machine Installed Plastic Ring Homogenously Bonded With Rubber Ring , 2 Pcs. 75mm Ø X 11.25° Upvc Bend, Cl. 150 With Machine Installed Plastic Ring Homogenously Bonded With Rubber Ring , 2 Pcs. 16mmø X 6m Round Bar , 174 Pcs Madrigal Sand , 70 Cu.m B. Labor (100mm Ø) , 14 Units (75mm Ø) , 4 Units 4. Interconnection A. Materials 1. Interconnection A 75mm X 50mm Ø C.i. Cross Tee Reducer, M/m/f/f W/ Bng , 1 Pc. 50mm Ø X D.i. Gate Valve, F/f W/ Bng , 1 Pcs 50mm Ø D.i. Adaptor, F/m W/ Bng (adapted To C.i Reducer Cross Tee And D.i. Adaptor) , 2 Pcs. 150mm Ø C.i. Valve Box Cover , 1 Pcs. 150mm Ø Upvc Pipe, Cl 150 , 1 Mtrs. 1m X 1m X 1/4" Thk Neoprene , 1 Pc. 50mm Ø X 6m Gi Pipe, Sch.40 , 1 Pc. 2. Interconnection B 100mm Ø C.i. Tee, M/m/f W/ Bng , 1 Pc. 100mm Ø X D.i. Gate Valve, F/f W/ Bng (adapted To D.i. Adaptor) , 1 Pc. 100mm Ø D.i. Adaptor, F/m W/ Bng , 1 Pc. 150mm Ø C.i. Valve Box Cover , 1 Pc. 150mm Ø Upvc Pipe, Cl 150 , 1 Mtrs. 1m X 1m X 1/4" Thk Neoprene , 1 Pc. 5. Fabrication & Installation Of Culvert Crossing (100mm Ø) , 1 Units (75mm Ø) , 1 Units 6. Fabrication & Installation Of Fire Hydran And Blow-off With Concrete Barricade And Concrete Pad (100mm Ø) , 2 Units (75mm Ø) , 1 Unit (50mm Ø) , 2 Units 7. Sand Bedding And Sand Cover (100mm Ø) , 1107 Lm (75mm Ø) , 148 Lm (50mm Ø) , 118 Lm 8. Hydrotesting, Disinfection And Flushing (100mm Ø) , 1107 Lm (75mm Ø) , 148 Lm (50mm Ø) , 118 Lm 9. Final Backfilling And Compaction A. Trench (100mm Ø) , 1107 Lm (75mm Ø) , 148 Lm (50mm Ø) , 118 Lm B. Bellhole , 24 M³ 10. Fabrication Of Safety Protectors And Warning Signs , 1373 Lm 11. Concrete Cutting , 782 Lm 12. Concrete Breaking , 32 M³ 13. Concrete Restoration , 32 M³ 14. Thrust Blocks Installation , 0.5 M³ 15. Interconnection To Existing Waterline A. Materials 1. Interconnection I 100mm Ø C.i. Wye Tee, F/f/f W/ Bng , 1 Pc 100mm Ø X D.i. Gate Valve, F/f W/ Bng (adapted To C.i. Wye Tee) , 1 Pc 100mm Ø D.i. Adaptor, F/m W/ Bng , 1 Pc. 100mm Fabricated Gi Short Pipe W/ 1/2" Thk Steel Flange W/ Bng (adapter To D.i Gate Valve And C.i. Sleeve Coupling) , 1 Pc. 100mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng (adapted To Upvc And Gi Pipe) , 2 Pc. 100mm Ø X 45° C.l. Elbow, M/m W/ Bng , 2 Pcs. 150mm Ø C.i. Valve Box Cover , 1 Pc. 150mm Ø Upvc Pipe, Cl 150 , 1 Mtr. 1m X 1m X 1/4" Thk Neoprene , 1 Pc. 2. Interconnection Ii & Iv 50mm Ø C.i. Tee, M/m/m, W/ Bng , 2 Pcs. 50mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng , 2 Pcs. 50mm Ø X 6m Gi Pipe, Sch.40(for Thrust Block) , 1 Pc. 3. Interconnection Iii 50mm Ø C.i. Tee, M/m/m W/ Bng , 1 Pc. 50mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng , 2 Pcs. 4. Interconnection V 75mm Ø C.i. Tee, F/f/f W/ Bng , 1 Pc. 75mm Ø X D.i. Gate Valve, F/f W/ Bng , 2 Pcs (adapted To C.i. Cross Tee And D.i. Adaptor) 75mm Ø D.i. Adaptor, F/m W/ Bng , 3 Pcs. 75mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng , 1 Pc. 150mm Ø C.i. Valve Box Cover , 2 Pcs. 150mm Ø Upvc Pipe, Cl 150 , 2 Mtrs. 1m X 1m X 1/4" Thk Neoprene , 1 Pc. 5. Interconnection Vi 75mm Ø C.i. Tee, M/m/f W/ Bng , 1 Pc. 75mm Ø X D.i. Gate Valve, F/f W/ Bng (adapted To C.i. Tee) , 1 Pc. 100mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng , 1 Pc. 75mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng , 1 Pc. 100mm Ø X 75mmø C.i. Reducer, M/f W/ Bng , 1 Pc. 150mm Ø C.i. Valve Box Cover , 1 Pc. 150mm Ø Upvc Pipe, Cl 150 , 1 Mtr. 1m X 1m X 1/4" Thk Neoprene , 1 Pc. 6. Interconnection Vii "200mm Ø X 100mm Ø Fabricated Wye W/ 1/2"" Thk Steel Flange(painted) " , 1 Pc 100mm Ø X 178mm D.i. Sleeve-type Coupling W/ Bng , 1 Pc 100mm Ø X D.i. Gate Valve, F/f W/ Bng (adapted To C.i. Tee) , 1 Pc 100mm Ø D.i. Adaptor, F/m W/ Bng , 1 Pc.

Details: Description Section I. Invitation To Bid Da8-infra-2025-09 (pr No. Bt-25-infra-rice-39835-0010) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Rice 2025-current Fund Intends To Apply The Sum Of Six Million Four Hundred Thirty-five Thousand Six Hundred Sixteen Pesos And 19/100 Only (p6,435,616.19) Being The Approved Budget For The Contract (abc) To Payment For The Contract For “supply Of Labor And Materials For The Construction Of Warehouse Located At Brgy. Gapas, Sta. Fe, Leyte”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Regional Field Office Viii Now Invites Bid For The Above Procurement Project. Completion Of Works Is Required Within One Hundred Twenty (120) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii: Instruction To Bidders Qty Uom Desription Total Cost Supply Of Labor And Materials For The Construction Of Warehouse Located At Brgy. Gapas, Sta. Fe, Leyte P6,435,616.19 96 Sq.ft Signboard/billboard 1 I.s. Mobilization/demobilization And Temporary Shelter 600 Sq.m. Clearing And Grubbing 91.24 Cu.m. Structure Excavation 376 Cu.m. Embankment 9255.19 Kgs. Reinforcing Steel 123.6 Cu.m. Reinforced Concrete 1 I.s. Formworks And Falseworks 644.56 Sq.m. Masonry Works 1185.34 Sq.m. Cement Plaster Finish 348.18 Sq.m. Metal Structures 348.18 Sq.m. Prepainted Metal Roofing 1 I.s. Plumbing 15.32 Sq.m. Ceramic Tiles 10.92 Sq.m. Carpentry And Joinery Works 3 Sets Steel Windows 61 Sets Aluminum Screen And Aluminum Glass Windows 4 Sets Doors 2 Sets Sliding Steel Door 1 I.s. Conduits, Boxes & Fittings 1 I.s. Wires & Wiring Devices 1 I.s. Power Load Center Switch Gear & Panel Board 15 Sets Lighting Fixtures 1 I.s. Solar Panel System 1185.34 Sq.m. Paintings 1 Lot Brass Marker Terms And Conditions: A During The Opening Of Bids, Bidders Shall: 1. Submit Certificate Of Project Site Inspection Issued By Farmer’s Association Or Barangay Officials Or Affidavit Of Site Inspection; 2. Submit Certificate Of Compliance To The Attached Drawings Duly Signed By The Bidder’s Authorized Representative And Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; B All Participating Bidder Must Comply With Section B Of Dpwh D.o. No. 197 Series Of 2016, Particularly In The Computation Ocm & Profit Of The Bid Amount. Use 12% For Vat Mark-up C During Post-qualification Evaluation 1. In Case Of Recomputed Bid, Bidder Shall Submit Its Revised Cost Estimates 2. Submit Pert/cpm And S-curve 3. Construction Methods 4. Manpower Schedule 5. Major Equipment Schedule 6. Provide Contractor's All Risk Insurance (cari) 7. Submit Plans, Design, And Specification Signed And Sealed By A Licensed Agricultural Engineer/ Agricultural And Biosystems Engineer; D Winning Bidder Shall: 1. Commence Construction Works Within Seven (7) Days Upon Receipt Of Notice To Proceed (ntp); 2. Complete The Construction Within 120 Calendar Days; 3. Provide Necessary Tools For The Satisfactory Completion Of The Project; 4. Assume Full Responsibility From The Time Project Construction Commences Up To The Final Acceptance By Darfo 8 And Shall Be Held Responsible For Any Damage In Part Or In Whole Except Those Occasioned By Force Majeure; 5. Assign A Project Engineer (either Licensed Agricultural Engineer Or Civil Engineer) That Will Oversee The Daily Construction Activities On Site; 6. Comply With The Quality Control Program (qcp) Schedule Of Minimum Testing Requirements Of The End-user; 7. Submit Material Test Report Or Its Equivalent Standard Certificate For Aggregate (sand & Gravel), And Cement 8. Submit Material Test Result From Accredited Testing Laboratory For Concrete, And Reinforcing Bar With Geotagged Photos, If Applicable; 9. Attend Pre-construction Meeting. 10. In Case Of Time Extension Due To Unworkable Weather Condition, Submit The Request With Pag-asa Weather Report And On-site Weather Chart Within The Succeeding Month. 11. Secure And Facilitate The Necessary Permits Required For The Project Implementation. 12. Strictly Observe Construction Safety Rules And Health Program Approved By Department Of Labor And Employment (dole) During Project Implementation. E Any Delay In The Project Completion Shall Be Subjected To Liquidated Damages Equivalent To At Least 1/10 Of 1% Of The Cost Of The Unperformed Portion Of The Works For Everyday Of Delay F Be Paid Through Partial Billing Based On Validated/verified Statement Of Work Accomplishment (swa) With Geo-tagged Photos On Major Works (before, During, And After) And Inspection Report By The Da-rfo8 Inspectorate Team. 1. At Least 30% Of The Physical Accomplishment; 2. At Least 70% Of The Physical Accomplishment; 3. At Least 75% Of The Physical Accomplishment; 4. 100% Of The Physical Accomplishment, Testing And Acceptance Of The Project G Advance Payment (maximum Of 15%) Will Be Granted Upon Submission Of The Following Requirements: 1. Advance Payment Bond By The Bidder 2. On-site Evaluation Report By The Da Project Engineer H Winning Bidder Shall Submit A Snapshot Of A Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Interested Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours, From 8:00 Am To 5:00 Pm 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 12, 2024 To January 08, 2025 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents Amounting To Ten Thousand Pesos Only (p10,000.00), Pursuant To The Latest Guidelines Issued By The Gppb. 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On December 19, 2024 9:00 Am At Bac Office, Da-rfo8, Kanhuraw Hill, Tacloban City Through Face To Face Or Videoconferencing/webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 08, 2025, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 10. Bid Opening Shall Be On January 08, 2025, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity Either Physically Or Through Videoconferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Details: Description Invitation To Bid For The Procurement Of 5 Units Multi-tiller Cultivator Under Organic Agriculture Program Fy 2025 (second Posting) 1. The Department Of Agriculture Regional Field Office Iva Through The Organic Agriculture Program Intends To Apply The Sum Of Seven Hundred Fifty Thousand Pesos (ᵽ 750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 5 Units Multi-tiller Cultivator Under Organic Agriculture Program Fy 2025 (second Posting) With Project Identification No.: Itb-2025-10-027 . Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 5 Units Multi-tiller Cultivator Walking-type Agricultural Tractor (rotary Tilling-type) I. Design And Performance Prime Mover: Four-stroke, Air-cooled, Single-cylinder, Gasoline Engine Rated Powe: 4.8 Kw (6.5hp), Minimum Starting System: Rope Recoil Fuel Consumption: Not More Than 1.5 Li/hr Engine Fuel Tank Capacity: 3.5 Liters, Minimum Field Capacity: 0.0625 Ha/hr, Minimum Average Depth Of Tillage: 65 Mm, Minimum Average Width Of Tillage: 1000 Mm Minimum Shall Be Free From Any Manufacturing Defects That May Be Detrimental To Its Operation All Metal Surfaces Shall Be Painted Properly Ii. Attachments And Accessories "a. Hoe Set (at Least 36 Cm Diameter) B. Rear Running Wheel C. L-shaped Tilling/rotary Blades D. Plough (1 Pc) E. Metal Wheel (pair) F. Weeding Wheel (pair) G. Ridger (1 Pc) H. Water Pump And Pto Mount (1 Set)" Iii. Safety Noise Level: 95db (a), Maximum During Operation, If Exceeded, An Ear Protection Device Must Be Provided For Each Unit. For Operator's Safety, The Following Shall Be Provided: Belt-guard Or Cover Mud-guard Rubber Hand Grip Iv. Maintenance Provided With Set Of Manufacturer's Standard Tools V. List Of Applicable Paes/pabes/pns/bafs Paes For Walking Type-agricultural Tractor (rotary Tilling Type) Paes For Small Engine Paes For Guidelines On After-sales Service Paes For Agricultural Machinery - Operator's Manual Vi. Other Requirements With Original Equipment Manufacturers (oem) Operators Manual With One (1) Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary Warranty Card For Each Unit Shall Be Provided By The Winning Bidder/supplier Upon Delivery Certification That The Bidder/supplier Shall Provide Warranty And After-sales Service Conforming To Pns/pabes 192:2024 - After-sales Service — Guidelines With Reflectorized "da-calabarzon" Logo With Valid And Passing Test Report Issued By Amtec Or Other Accredited Testing Center Certification That The Bidder/supplier Shall Provide Fuel And Technician/operator During Demonstration And Training Of The Operator/recipient Certification That The Bidder/supplier Shall Provide Fuel, Engine Oil And Technician/operator During Acceptance Testing. The Bidder/supplier Shall Ensure That The Machine And Its Engine Is Already Subjected To Break-in Prior To Conduct Of Acceptance Testing. Certification That All Units Shall Be Demonstrated And The Recipients Shall Be Trained In Proper Operation, Routine Maintenance, After-sales And Warranty Coverage Conduct Of Acceptance Testing Of Randomly Selected Units Upon Delivery Prior To Acceptance And Payment Of The Contractor. The Number Of Units Will Be Determined Using Pns/paes/pabes - Agricultural Machinery - Method Of Sampling. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers, Accreditation And Classification (namdac) Certificate Of Accreditation With Permit To Operate (pto) And Certificate Of Conformity (cc) Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 All Technical Specifications Shall Be Signed And Sealed By Professional Agricultural And Biosystems Engineer (abe) With Valid Prc License And Professional Tax Receipt (ptr) In Consonance With Ra 10915 Place Of Delivery: Apco Offices Calabarzon Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (ᵽ1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 11:50 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.)) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 11:50 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee