Painting Tenders

Details: Description Invitation To Bid For The Procurement Of 2 Units Recirculating Dryer (6 Tonner) Under Corn Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Corn Program Intends To Apply The Sum Of Seven Million Two Hundred Thousand Pesos (ᵽ 7,200,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 2 Units Recirculating Dryer (6 Tonner) Under Corn Program Fy 2025 With Project Identification No.: Itb-2025-12-061. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 2 Units Recirculating Dryer (6 Tonner) I. Design And Performance Type: Batch Type, Recirculating, Stationary Capacity: 4 To 6 Mt Drying Rate: 2% Per Hour, Minimum (batch Type) Drying Efficiency: Minimum, 75% Moisture Gradient: Maximum, 2% Drying Loss/spillage: 1% Maximum Product Quality: A. Cracked Grain, % Increase: 10%, Maximum B. Broken/split Kernels, % Increase: 7%, Maximum C. Hulled/damaged Grain, % Increase, 2% Maximum With Programmable In-line Monitoring System For Moisture Content, Temperature And Can Control Heating System And Shutdown The Drying Operation When The Grain Is Already Dried. Material Of Construction: Parts Of The Dryer With Direct Contact With The Grains Shall Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Power Requirement: Single-phase Electrical Connection, Maximum 5 Kw Rated Power Of All Electric Motors Ii. Heating System Requirement 1. Heating System 1 (petroleum Based Fuel) Petroleum Based Fuel: Direct-fired Heating System Efficiency: 90%, Minimum With The Following Components And Accessories: - Flame Sensor - Electronic Ignition System - Automatic Fuel Shut-off - Adjustable Fuel Vaporizer - Automatic Temperature Control - Elevated Non-corrosive And Heat Resistant Fuel Container At Least 200 Liters Capacity - Compatible Single-phase Electric Motor For The Heating System 2. Heating System 2 (biomass Fuel) Biomass Fuel: Indirect-fired Heating System Efficiency: 50%, Minimum With The Following Components And Accessories: - Heat Exchanger: Stainless (ss 201/ss 304, 1.2mm, Minimum) / Fire Tubes (5mm Seamless, Minimum) - Burning Chamber: Made Of Refractory Bricks - Automatic Fuel Feeder: Auger Type - Temperature Control - Compatible Electric Motor For The Heating System Iii. Other Dryer Components And Accessories 1. Pre-cleaner Input Capacity: 4-6 Ton/hr, Minimum Sieve Mechanism: All Parts That Come In Contact With Grain Must Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Capable Of Removing Large Impurities And Unthreshed Paddy With Compatible Electric Motor" 2. Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2, Made Of Stainless Steel Or Primer Painted And Powder Coated B.i. Or G.i. Sheet. Insulator Material For The Ducting Shall Be Made Of Ceramic Blanket. 3. Dust Collection System Consists Of Cyclone Separator / Collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 4. Generator Set Rated Power/kva: Minimum 15 Kva Voltage Requirement Compatible To The System Power Supply / Generating System Should Be Brand New And Not Refurbished. At Least Three (3) Years From The Date Of Manufacture To The Date Of Opening Of Bids And With Engrave Serial Number. Provided With Mechanical Transfer Switch (mts) The Electrical Wire, Wire Accessories And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel / System Shall Be Provided By The Bidder With Thermal Insulation And Noise Suppressor. Noise Level: 92db Maximum, If Exceeded, Earmuffs Shall Be Provided For Each Unit. With Protection Or Covering Against Rat Entry (as Per Manufacturer’s Specification) 5. Portable Handheld Moisture Meter Grain: Applicable To Corn Kernel, Paddy/rough Rice And Milled Rice Type: Capacitance Moisture Range: 12-15% Or Wider Accuracy: ±0.5% Or Better Lcd/led Display Battery Operated With Product Brochure Written In English 6. Standard Heavy-duty Tools, Made Of Tempered Steel And Chrome Vanadium Shall Include But Not Limited To The Following: - One Set Socket Wrench (no. 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 27, 30, 32, Minimum) - One Set Combination Wrench (open And Box, 10pcs - Size Appropriate To The Drying System) - Electrical Plier: 200mm, Minimum - Screw Driver,: Philips And Flat Head, 300mm Minimum - Grease Gun: 250mm Cylinder Length, Minimum - Mechanical Pliers: 200mm, Minimum - Heavy Duty Toolbox And Roll Up Tools Holder (can Accommodate All Tools) 7. Air Compressor For Cleaning, Heavy Duty, At Least 120 Psi, 5m Air Hose 8. One (1) Unit Fire Extinguisher, Dry Chemical, Stored Pressure Type, 6 Kg Minimum 9. Provision Of Disposal Cart For The Ashes 10. With Portable, Heavy-duty Weighing Scale, Minimum 150 Kg Weighing Capacity 11. With Collapsible Cover (trapal), Thickness: S200 12. With Bagging Bin With Minimum Capacity Appropriate To The System 13. Non-stainless Material Of The Dryer Shall Be Painted Finish With Rust-proofing Primer And Final Paint Color. Iv. Other Requirements 1. Certification That The Bidder Will Submit A Duly Signed Electrical Plan Of The Drying System Offered (electrical Layout, Schedule Of Loads, General Notes And Specification, And Legends/symbols) By A Registered Professional Engineer As A Condition For Payment 2. Copy Of Equipment Manufacturer Manual Of Drying Unit, Biomass Furnace, Generator Set And Portable Handheld Moisture Meter Written In English/filipino/vernacular To Be Presented During Post-qualification Evaluation 3. Copy Of The Brochures For The Drying Unit, Generator Set, Weighing Scale, Portable Handheld Moisture Meter And Air Compressor Are To Be Presented During The Post-qualification Evaluation. 4. With Laminated Reflectorized Vinyl Sticker "da-calabarzon" Logo (254 Mm X 254mm) For The Prescribed Part Of The Dryer And Generator Set, Sticker Specifications: 140 Gsm And Thickness Of 175 Microns, Minimum 5. Manufacturer's Nameplate (engraved In A Metal Sheet) With The Serial Number Of The Machine And Serial Number Of The Power Generating Unit 6. With Valid Amtec Test Result That Conforms To The Pns-paes 201:2015-agricultural Machinery-heated-air Mechanical Dryer-specifications. Separate Amtec Test Report For Both Heating Systems Should Be Provided. 7. Conduct Of Acceptance Testing Of All Units After Complete Installation Is Required Prior To Acceptance And 100% Payment Of The Winning Bidder. 8. Certification From The Bidder That They Shall Provide All Fuel, Raw Materials (corn Kernels) And Technician/operator Needed During Acceptance Testing. 9. Certification From The Bidder That The Offered Unit Is Brand New, Latest Model And Not Rebranded 10. Conformity As To The Technical Specifications Of The Procuring Entity Signed And Sealed By An Agricultural And Biosystems Engineer As Prescribed By The Section 27.1 Of The Ra 10915 11. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Certificate Of Accreditation 12. With Permit To Operate And Certificate Of Conformity Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 13. Provision Of After Sales Services: •with One Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary •valid Certificate Of Dealership / Distributorship / Authority To Sell And Commitment To Supply Directly Issued By The Dryer Manufacturer Or Distributor To The Bidder •certification From The Supplier That They Will Repair Or Replace The Defective Parts Or Components And Provide After-sales Service Within 72 Hours (3 Days) Upon Receipt Of Complaints (pns/bafs/paes 192:2024) •certification That The Bidder Will Provide Training On The Proper Handling, Operation And Maintenance Of The Dryer And Generator Set For At Least Two (2) Operators Per Beneficiary. 14. Notarized Certificate Of Stock Availability Or Stock Allocation From The National Distributor Or Manufacturer Specifying The Name Of The Project 15. Certification Of Guaranteed Spare Parts Availability For At Least Five (5) Years 16. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. V. Terms Of Payment 85 % Upon Complete Installation And 15% Upon Testing/commissioning And Acceptance Of Recipient Vi. Contract Duration And Delivery Place: Days To Complete Supply, Delivery, Installation And Testing: 60 Calendar Days Delivery Place: Batangas And Quezon Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (ᵽ10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 01:10 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 01:10 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: The U.s. Army Corps Of Engineers, Japan Engineer District Is Providing A Pre-solicitation Notice Pursuant To Far 5.204 For An Upcoming Solicitation. Please Review All Information In This Notice And Follow The Submittal Requirements Detailed Within If Interested. project Information project Title: Conversion Of Building To Secure Space, Okinawa, Japan proposed Solicitation Number: W912hv25r0002 appropriation Type. Fy2025 Operation & Maintenance, Marine Corps (ommc) project Magnitude: Between $5,000,000 And $10,000,000 (far 36.204) product Service Code: Y1az – Construction Of Other Administrative Facilities And Service Buildings project Naics: 236220, Commercial And Institutional Building Construction Was Determined To Be The Most Applicable To This Requirement. sources Sought Market Survey Was Previously Conducted In W912hv-24-z-0021. this Industry Comprises Establishments Primarily Responsible For The Construction (including New Work, Additions, Alterations, Maintenance, And Repairs) Of Commercial And Institutional Buildings And Related Structures, Such As Stadiums, Grain Elevators, And Indoor Swimming Facilities. This Industry Includes Establishments Responsible For The On-site Assembly Of Modular Or Prefabricated Commercial And Institutional Buildings. Included In This Industry Are Commercial And Institutional Building General Contractors, Commercial And Institutional Building For-sale Builders, Commercial And Institutional Building Design-build Firms, And Commercial And Institutional Building Project Construction Management Firms. project Description: this Project Will Provide Conversion Of Approximately 6,116 Square Feet Of A Single Level Above Ground Building To Meet Secure Space Specifications. Work Includes All Labor, Transportation, Materials, Equipment, And Supervision Necessary To Accomplish Various Construction, Demolition, Repairs, Alterations, And Associated Incidental Environmental Work. (including But Not Limited To Asbestos, Lead-based Paint, Mold, Pcbs, Site Contamination, Etc.) To This U.s. Government Facility Located Within Japan, By Means Of This Design-bid-build (d-b-b) Contract. this Contract Is For The Construction Portion Only; Construction Security Administration Will Be Provided Under A Separate Contract. solicitation Information: procurement Method: The Government Intends To Issue A Request For Proposal (rfp) Solicitation Utilizing The Lowest Price Technically Acceptable Source Selection Process Outlined In Far 15.101-2 And Award A Firm-fixed-price Construction Contract Because Of The Solicitation. this Procurement Will Be Issued In Accordance With Far 4.403 And Dfars Pgi 204.403 And Comply With Dod 5220-22-m - National Industrial Security Program Operating Manual (nispom), Dod 5220.22-r - Industrial Security Regulation, And Icd-705 And Its “technical Specifications For Construction And Management Of Sensitive Compartmented Information Facilities.” offeror’s Must Have A Valid U.s. Facility Clearance Level (fcl) Of Secret To Receive And Respond To The Upcoming Solicitation. This Project Includes Contract Plans, Specifications, And Drawings That Are Controlled Unclassified Information (cui) Which Can Only Be Released To Offerors Who Are U.s. Citizens. The Government Anticipates The Solicitation Being Available In Mid-november 2024. A Site Visit Is Tentatively Planned For 04 December 2024 On Okinawa, Japan. The Contracting Officer Is Currently Projecting Proposals Due In Late April 2025. if You Have The Proper Fcl And Are Interested In This Project, Please Submit The Following To Jack.t.letscher@usace.army.mil And Norman.roldan@usace.army.mil: your Request Must Be Received No Later Than 5:00 Pm, 1 November 2024, Eastern Standard Time. company Name, Address, And Point Of Contact commercial And Government Entity (cage) Code: The Cage Code Will Be Used To Validate Your Company’s Dod Secret Facility Clearance Level (fcl). unique Entity Identifier (uei) Registered To Do Business With The Federal Government In Sam.gov completed And Signed “attachment A – Controlled Unclassified Information Non-disclosure Agreement” For Everyone That Will Have Access To The Cui Solicitation Documents. completed And Signed “attachment B - Instruction For Handling And Dissemination Of Controlled Unclassified Information” For Every Person That Will Have Access To The Cui Solicitation Documents. email Address(es) That Correspondence Related To This Project Can Be Sent. This Email Address Shall Only Be Accessible By U.s. Citizens Who (1) Have Executed The Attachment A And B Above And (2) Need To View The Cui To Propose Or Perform On The Contract. no Solicitation Documents Will Be Released Until All Information Above Has Been Received By The Government And Fcl Has Been Verified. Your Request Shall Be Received No Later Than 5:00 Pm, 1 November 2024, Eastern Standard Time. If Verified To Have The Proper Secret Fcl, The Government Will Send Solicitation Documents Once Available Via Dod Safe Encrypted File Exchange To The Provided Email Address. all Interested Companies Shall Be Actively Registered In The System For Award Management (sam) Database To Be Eligible For Award Of Government Contracts. Information On Registration And Annual Confirmation Requirements May Be Found At Http://www.sam.gov.

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 2 Cy 2024 , Intend To Apply The Sum Of P 3,381,096.77 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of Stairs At Buhanginan Hills (near Girlscout Headquarters), Buhanginan Hills, Brgy. Pala-o, Iligan City With Project No. Cb(b)-24-149 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Improvement Of Stairs At Buhanginan Hills (near Girlscout Headquarters), Buhanginan Hills, Brgy. Pala-o, Iligan City General Requirements •permits And Clearances •facilities For The Engineers •installation Of Project Billboard- 2 Sets •occupational Safety And Health Program •mobilization And Demobilization Removal Of Obstructions •clearing/removal Of Obstruction •uprooting/cutting Of Trees Gravel Fill •100 Mm Thk. Gravel Base For Footings And Zocalo •75 Mm Thk. Gravel Base For Bench, Footing And Plantbox Flooring •50 Mm Thk . Gravel Base For Stair Steps Electrical Works •laying Of The Underground Or Overhead Power Cables Connecting To The Main Power Supply •installation Of Protection System And Outdoor Electrical'panel (nema Enclosure W/ 15at Circuit Breaker) •erection Of Modem-type Outdoor Lamp Posts And Bollards (including Foundations And Anchor Bolts) •complete Wiring Of The Luminaire To The Electrical Supply •installation Of Outdoor Junction Boxes For Protection And Organization •underground Cable Burial Or Concrete-embedding Of Cable For Cable Routing •proper Grounding Of The Lamp Posts,electrical Panel, And Other Metal Parts For Safety •concrete Pouring For Footings, Zocalo,columns, 75 Mm Thk. Concrete Flooring For Plantbox , 50 Mm Thk. Concrete Topping, Bench Footing And Bench, 100 Mm Thk. Concrete Flooring For Landing And Stair Steps With Pebble Topping. •installation Of Formworks And Falseworks For Columns, Bench, Concrete Topping, And Stairs (steps And Landing) •removal Of Formworks And Falseworks Steel Reinforcements And Steel Works •installation Of 12 Mm Ø Dsb For Footings And Columns (bedbars And Vertical Bars) Installation Of 10 Mm Ø Dsb For Column Lateral Ties, Concrete Flooring For Plantbox, Concrete Topping, Bench Footing And Bench, Concrete Flooring For Landing And Stairs •installation Of 50 Mm Ø G.i. Pipe Schd. 40 For Lamp Post •installation Of 50 Mm Ø G.i. Pipe Schd. 40,25 Mm X 25 Mm X 3mm Angle Bar And 50 Mm X 50 Mm Wire Mesh (5mm Thk.) For Railings •installation Of 38 Mm Ø G.i. Pipe Schd. 40 For Bench Fabrication Masonry Works •piling Of 4" Thk. Chb At 800 Mm Height W/ 10mm Ø Dsb For Vertical And Horizontal Bars Sped At 0.60m O.c Bothways For Plantbox Softscape •installation Of Plantboxes With Plants And Frog Grass I. Construction Safety And Health Program (q = 1.00 Lumpsum) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Ii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 3"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iii. Mobilization & Demobilization (q = 1.00 Lot) Iv. Facilities For The Engineers (q = 1.00 Lot) Includes True-rms Clamp Meter, 400 A Ac/oc, 600v Ac/oc, Cat Iii 600 V Cat Iv 300 V, Fluke 325; Digital Light Meter, Up To 20,000 Lux, Fluke 941; Non-contact Voltage Tester,90 V Ac To 1000 V Ac, Cat V 1000, Fluke 2ac. V. Removal Of Structures And Obstruction (q = 55.56 Cu.m.) Includes Uprooting/cutting Of Trees. Vi. Earthworks (q = 59.82 Cu.m.) Includes Volume To Be Excavated, V = 39.82 Cu.m.;volume To Be Backfilled, V = 39.82 Cu.m.; Gravel Bedding, 1-1/2"ø, V = 20 Cu.m Vi . Steel Reinforcements & Steel Works (q = 9,083.70 Kgs.) Includes 12 Mm Dia. X 6m Dsb; 10 Mm Dia. X 6m Dsb; #16 G.i Tie Wire; 50 Mm Ø G.i. Pipe Schd. 40; 38 Mm Ø G.i. Pipe Schd. 40; 25.4 Mm Ø G.i. Pipe Schd. 40; 5mm Ø Thk. Wire X 50mm X 50mm Mesh Steel Matting; 25 Mm X 25 Mm X 3mm Thk. Angle Bar; Red Lead Metal Primer, Quick Dry Enamel Paint, Paint Brush; Welding Rod (e-6011). Viii. Concrete Works, Formworks And Scaffoldings (q = 47.04 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 2" X 10' Sized Coco Lumber, Assorted Sized C.w Nails. Ix. Masonry Works (q = 194.40 Sq.m.) Includes 4" X 8” X 16" Chb, Portland Cement, Washed Sand, Pebbles. X. Electrical Works (q = 1.00 Lot) Includes Modern-type Outdoor Lamp W/ Post, 2m Height, W/ High-powered 50w Led Bulb, Daylight; Outdoor Bollard Fixture W/ 20w Led Bulb,ip65; Cu Wire,3.5mm2, Thhn/thwn-2, Stranded; Circuit Breaker,15a,2pole,220v,60hz; Circuit Breaker Enclosure, Nema 1,2p; Secondary Rack W/spool Insulator,2-pole,w/screws; Outdoor Junction Box, Ip65 Weather Water Proof, 80x50 Round/octa, W/ Rubber Gasket & Screws; Upvc Conduit Pipe,1/2"x3m; Electrical Tape,0.16x19x16000 Mm; Solvent Cement 200 Cc; Pvc Conduit Fittings And Connectors. Xi.softscape (q = 30.20 Sq.m.) Includes Softscape (includes Garden Soil (planting Medium), Ornamental Plants ,shrubs , Trees). Approved Budget For The Contract (abc): P 3,381,096.77 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Sixty-seven (167) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: December 10, 2024 – January 7, 2025 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2. Pre-bid Conference: December 17, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Submission Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5. Opening Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City.the Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: December 10, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-149 (ceo-infra)

Details: Description Invitation To Re-bid The Iligan City Government Bids And Awards Committee (bac), Through Special Educational Fund Intend To Apply The Sum Of P 4,830,913.32 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Three-storey Guidance And Counselling Building, Iligan City National High School (icnhs), Brgy. Mahayahay, Iligan City With Project No. Cb(b)-24-130 (ceo-infra) Re-bid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Three-storey Guidance And Counselling Building, Iligan City National High School (icnhs), Brgy. Mahayahay, Iligan City •general Requirements -pennits & Clearances; -installation Of Project Billboard,2 Sets; -occupational Safety & Health Program; •clearing & Grubbing -cutting Of Trees; •earthworks -excavation For Foundation, Tie Beam, Wall-footing , Zocalo, Septic Vault, Concrete Storage, Stairs Foundation & Grease Trap; -backfilling & Compaction For The Slab On Grade; -gravel Bedding For Foundation , Tie Beam, Wall-footing , Slab On Grade, Zocalo, Septic Vault , Concrete Storage, Stairs Foundation & Catch Basin; •concrete Works, Forms & Scaffoldings -concrete Pouring For Foundation , Columns, Tie Beam, 2nd & 3rd Floor Beams, Suspended Slab, Roof Beams , Cantilever Beams, Slab On Grade, Wall-footing (foundation) , Zocalo (foundation) , Septic Vault Flooring (top & Bottom), Concrete Storage (foundation), & Catch Basin Flooring; •masonry Works -installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor, Balcony (2nd Floor) , Parapet,wall-footing ,septic Vault, Catch Basin, Concrete Storage & Zocalo, W/plaster Finish,& Smooth On Expose Areas; -using 10mmø X 6m Deformed Steel Bars Wf#.16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @3rd Layer; •steel Reinforcement -using 10mmø, 12mmø, 16mmø & 20mmø Deformed Steel Bars Wf#.16 G.i Tie Wire; •paint Works & Finishes; -skim Coating Only For All Wallings At Ground Floor Only; •steel Works -fabrication & Installation Of 50mm X 50mm X 6mm Thk., 38mm X 38mm X 6mm Thk., 38mm X 38mm X 4.smm Thk ., 25mm X 25mm X 4.smm Thk., 25mm X 25mm X 2mm Thk. Angle Bar,25mm X 25mm X 3/16" Thk. Angle Bar, 25mm X 3/16" Thk. Flat Bar. 2" X 4" X 1.smm Thk. C-purtins W/ 10mmø Dsb Sagrods, 12mmø Turnbuckle & Cross Brace; 10mmø Anchor Bolt,epoxy Primer; -installation Of Stainless Steel Square Tube Railings- Grade 304 For Stairs & Balcony; •tinsmithry Works -installation Of 0.4mm Thk. Colored Roof Long-span Rib Type,0.4mm Thk. Pre-fab End Flashing, 0.4mm Thk. Pre-fab Fascia Cover,& 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type W/complete Accessories ; •electrical Works ; -electrical Works At Ground Floor, & Provisions; •plumbing Works; -installation Of Plumbing Fixtures At Ground Floor Only; -installation Of 3"ø Pvc Pipe For Downspout W/ G.i Basket Strainer, Pvc Pipe Clip W/complete Accessories ; -provision Of Pvc & G.i Pipes For 2nd Floor & 3rd Floor Fixtures; I. Permits And Clearance (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv.mobilization & Demobilization (q = 1.00 Lot) V.clearing And Grubbing (q = 1.00 Lot) Vi. Earthworks (q = 147.48 Cu.m) Includes Volume To Be Excavated, Volume To Be Backfilled, Pit Run Soil/earthfill (backfilling Suitable Materials), Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 75.99 Cu.m) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 284.81 Sq.m) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix.steel Reinforcements (q = 16,429.80 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, 20mm Dia. X 6m Dsb, #16 G.i Tie Wire. X.steel Works (q = 2,034.40 Kg/s) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 16pcs, 38mm X 38mm X 6m X 4.smm Thk. Angle Bar- 20pcs, 38mm X 38mm X 6m X 6mm Thk. Angle Bar- 23pcs, 25mm X 25mm X 6m X 4.5mm Thk. Angle Bar- 24pcs, 25mm X 25mm X 6m X 2.0mm Thk. Angle Bar- 7pcs, 1" X 1" X 6m X 3/16" Thk. Angle Bar- 4pcs, 25mm X 6m X 3/16" Thk. Flat Bar- 3pcs, 50mm X 100mm X 6m X 1.5mm Thk. C-purlins- 20pcs, 12mmø X 6mm Plain Bar Cross Brace- 8pcs, 12mmø Turnbuckle, Sagrods-10mmø X 6mm Dsb- 18pcs, 10mmø Anchor Bolt (l-type), Welding Rod (6011), 2" X 3" X 6m X 1.0mm Thk. Stainless Steel Rectangular Tube- Grade 304, 2" X 2" X 6m X 1.0mm Thk. Stainless Steel Rectangular Tube- Grade 304, Stainless Welding Rod (1.60mm), Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi.tinsmithry (q = 80.73 Sq.m) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored End Flashing (0.4mm Thk. X 8'), 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes (q = 388.99 Sq.m) Includes Skim Coat, Sand Paper. Xiii. Electrical Works (q = 1.00 Lot) Includes 2.0mm2 Thhn Stranded Copper Wire, 3.5mm2 Thhn Stranded Copper Wire, 8.0mm2 Thhn Stranded Copper Wire, 14.0mm2 Thhn Stranded Copper Wire, 38.0mm2 Thhn Stranded Copper Wire, Pvc Conduit 15mm, Pvc Elbow 15mm, Junction Box 4x4", Utility Box 2x4", Pvc Conduit 20mm, Pvc Elbow 20mm, Emt Conduit 32mm, Emt Coupling 32mm, Service Entrance Cap 32mm, Secondary Rack With 2 Spool, Duplex Convenience Outlet, Airconditioning Outlet, Single Gang Switch With Led Indicator 230v, Two Gang Switch With Led Indicator 230v, Three Gang Switch With Led Indicator 230v, Single Gang Three Way Switch With Led Indicator 230v, Led Panel Light Recessed Round Type 18w (230v), Led Panel Light 30x60 24w (230v Daylight), Led Panel Light 30x30 18w (230v), Circuit Breaker 2 Pole 15at (230v Plug In Type), Circuit Breaker 2 Pole 20at (230v Plug In Type), Circuit Breaker 2 Pole 60at (230v Plug In Type), Electrical Panelboard 10 Holes 8 Branches Plug In Type, Mccb 125 At 2 Pole 230v, Enclosure For 125 At Mccb, Solvent Cement 100cc, Minor Electrical Peripherals. Xiv. Plumbing Works (q = 1.00 Lot) Includes 6" Dia. X 10' Pvc Pipe S-1000, 4" Dia. X 10' Pvc Pipe S-1000, 4" Dia. Pvc Sanitary Tee (s-1000), 4" Dia. Pvc Elbow 1/4 Bend (90 Deg.), 4" Dia. Pvc Elbow 1/8 Bend (45 Deg.), 4" Dia. Pvc Coupling, 4" Dia. Pvc Clean Out W/adapter & Plug, 4" X 2" Dia. Pvc Coupling Reducer, 4" Dia. Pvc Cross Tee, 3" Dia. X 10' Pvc Pipe S-1000, 3" Dia. Pvc Elbow 1/4 Bend (90 Deg.), 3" X 2" Dia. Pvc Coupling Reducer, 3" X 2" Dia. Pvc Wye, 3" Dia. Pvc Elbow 1/8 Bend (45 Deg .), 3" Dia. Pvc Clean Out W/adapter & Plug, 3" Dia. Pvc Sanitary Tee (s-1000), Pvc Pipe Strap/clip, Bolt (54pcs), Nut (54pcs) And Washer (54pcs), 2" Dia. X 10' Pvc Pipe S-1000, 2" Dia. Pvc Tee, 2" Dia. Pvc P-trap, 2" Dia. Stainless P Trap, 2" Dia. Pvc Elbow 1/4 Bend (90 Deg.), Pvc Cement (400cc), 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line, 1/2" Diam. G.i Threaded Pipe Elbow (90deg.), 1/2" Diam. G.i Threaded Pipe Tee, 1/2" Diam. G.i Threaded Union Patente, G.i Basket Strainer, 4" X 4" Stainless Floor Drain, Water Closet W/complete Fittings/accessories-heavy Duty, Lavatory -heavy Duty, Faucet W/complete Accessories-heavy Duty, Teflon Tape (3/4" X 10m). Approved Budget For The Contract (abc): P 4,830,913.32 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Eighty (180) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: December 10, 2024 – January 7, 2025 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: December 17, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City.the Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed) Darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: December 10, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-130 (ceo-infra)

Details: Description 2nd Invitation To Bid For The Supply And Delivery Of Materials For The Construction Of Forest Library Cum Learning Center At Puguis Communal Forest 1. The Municipal Government Of La Trinidad, Through The General Fund 2024 Intends To Apply The Sum Of Three Hundred Ninety Four Thousand Forty Pesos (php394,040.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Materials For The Construction Of Forest Library Cum Learning Center At Puguis Communal Forest. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of La Trinidad, Benguet Now Invites Bids For The Project: Project Reference No.: 2024-11-6148-mo-menro Name Of Project: Supply And Delivery Of Materials For The Construction Of Forest Library Cum Learning Center At Puguis Communal Forest Project Location: La Trinidad, Benguet Contract Duration: Within 10calendar Days From Receipt Of The Notice To Proceed Brief Description: Qty. Unit Description 24 Piece Gi Sheet (rib Type) 20ft X .5mm 40 Piece Gi Sheet (cladding) 8ft X .5mm 500 Piece Hollow Block, 4” 8 Piece Gutter 5x24’ 10 Piece Pvc Pipe 3” 2 Piece Exhaust Fan Xfw-300 60 Piece Metal Furring 20’ 10 Piece Carrying Channel 20’ 18 Piece Wall Angle 8’ 1.5” 8 Piece Gi Pipe 3”, S40 22 Piece Channel Bar 2x4x1/8 4hd 40 Piece “c” Purlins 2"x3" 8 Piece “c” Purlins 2"x6" 40 Piece Tubular 2”x2” 60 Piece Plywood (marine) 1/4 3 Load River Sand 3 Load Crushed Sand 3 Load Gravel, 3/4 100 Bag Cement, 40kg 4 Box Gypsum Screw 3” 5 Kilo Welding Rod, Special 5 Piece Drill Bit 5/32 5 Piece Paint Brush 2” Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Of The Municipal Government Of La Trinidad, Benguet And Inspect The Bidding Documents At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet From 8:00am To 5:00pm, Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27- January 8, 2024 At Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (php500.00). 6. The Municipal Government Of La Trinidad, Benguet Will Hold A Pre-bid Conference On (n/a) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet On Or Before January 8, 2024 At 9:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 8, 2024 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipal Government Of La Trinidad, Benguet Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Corazon A. Uyaan Head Bac Secretariat Bids And Awards Committee Office Municipal General Services Office-extension 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet Contact No.: 0969 – 334 – 9233 / (074) 619 - 2103 E-mail Address: Bac01latrinidad@yahoo.com Approved: (sgd) Yoshio P. Labi Bac Chairperson Noted: (sgd) Romeo K. Salda Head Of The Procuring Entity

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services

Details: Description Description Republic Of The Philippines Danao City Brgy. Binaliw Invitation To Apply For Eligibility And To Bid Brgy. Solid Waste Management Vehicle Of Brgy.binaliw, Danao City The Brgy.binaliw, Tends To Apply The Sum Of Php900,000.00 Being Approved Budget For The Contract (abc) To Payments Under The Contract For Brgy. Solid Waste Management Vehicle At Brgy. Binaliw, Danao City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. The Barangay Binaliw, Now Invites Sealed Bids From Eligible Bidder To Participate In The Public Bidding For Brgy.solid Waste Management Vehicle @ Brgy. Binaliw, Danao City As Follows; Seq. Qty. Item Description Estimated Unit Cost Estimated Cost 1. 1 Unit Dump Truck 6 Wheeler At Least 5 Cu.m Capacity Load 900,000.00 900,000.00 Diesel Engine 4 Cylinder Manual Transmission Reconditioned Surplus New Paint & Upholstery With Barangay Logo Each Door With Sticker Barangay Binaliw Front & Back 1 Hydraulic Jack, Spare Tires, Tire Wrench Registered Name Of Barangay Binaliw With Public Address System Php 900,000.00 Delivery Of The Goods Is Required Not Later Than January 11, 2025.the Description Of An Eligible Bidders Is One Who Have Submitted The Following Requirements: Eligibilty Requirements To Be Submitted On Dec. 27- January 03, 2025 At 2:00 P.m. (note: All These Documents Should Be In A Separate Envelope.) 1. Dti Business Name Registration Or Sc Registration 2. Tax Clearance 3. Business Permit 4. Tax Identification Number 5. Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 6. Omnibus Sworn Statement Duly Notarized 7. Valid Joint Venture Agreement 8. Articles Of Partnership Or Incorporation 9. On-going And Awarded Contracts 10. Completed Similar Contracts 11. Copies Of End-user’s Acceptance Letters For Completed Contracts 12. Specification Of Whether Or Not The Prospective Bidder Is A Manufacturer, Supplier, Or Distributor Duly Notarized 13. Audited Financial Statement. 14. Nfcc Duly Notarized Or Credit Line At Least 10% Of The Abc 15. Geps Registration 16. Procurement Of Bid Document Php 3,000.00 17. Letter Of Intent Submission And Receipts Of Bids On January 03, 2025 At 1:30 O’clock In The Afternoon At The Bids And Awards Committee Office At Brgy. Binaliw, Danao City. Technical Envelope: 1. Bid Security -2% Cash/ Cashier’s Check/manager’s Check/letter Of Credit/bank Draft/guarantee (based On Abc)5% Gsis Bond (based On The Abc)/bid Securing Declaration 2. Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 3. Production / Delivery Schedule 4. Manpower Requirements 5. After-sales/parts, If Applicable. 6. Technical Specification Of The Products 7. Commitment To Extend A Credit Line / Nfcc At Least 10% Of The Abc Duly Notarized. 8. Omnibus Sworn Statement Duly Notarized Financial Envelope: 1. Bid Prices In The Bill Of Quantities In The Prescribed Bid Form. 2. The Recurring And The Maintenance Costs,if Applicable. Instructions To Bidders: 1.) For Winning Bidders, Performance Security Shall Be Required To Guarantee The Faithful Performance Upon Signing The Contracts It Maybe 5% Of The Contract Prices On A Form Of Cash/manager’s Check Or 30% Gsis Bond. 2.) Retention In The Amount Equivalent To At Least 10% Of Every Progress Payment Made Or Special Bank Guarantee Equivalent To At Least 10% Of The Total Contract Price.the Said Amount Shall Be Released Only After The Lapse Of The Warranty Period,3 ,months In Case Of Supplies And 1year In The Case Of Purchase Of Equipment. 3.) All Particulars Relative To Pre-qualifications, Biddings, Evaluation Of Bids And Awards Of Contracts Shall Be Governed By The Provision Of Ra 9184 And Other Rules Regulation As Maybe Applicable. 4.) The City Government Reserves The Right To Reject Any/or All Bids, To Waive Any Defect,informalities Therein And To Award To The Bidders Upon Evaluation By The Bids And Awards Committee (bac) The Bid That Are More Advantageous To The City. 5.)5% Value Added Tax (vat) Withheld Of The Contract Price.1% Creditable Income Tax Of Contract Price. 6.) Bidders Should Fill-up All Items; Otherwise In Case Their Quotation Is Incomplete They Are Automatically Disqualified. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using As Specified In The Implementing Rules And Regulations Par! (irr-a) Of Republic Act No. 9184 (r.a. 9184), Otherwise Known As The Government Procurement Reform Act,and Is Restricted To Organization With At Least Sixty Percent (60%)interest Or Outstanding Capital Stock Belongings To Citizen Of The Philippines, As Specified In Republic Act 5183 (r.a.5183).only Bids From Bidders Who Pass The Eligibility Check Will Be Opened. The Process For The Eligibility Check Is Described In Section Ll Of The Bidding Documents, Itb. The Bidder With The Lowest Calculated Bid (lcb) Shall Advance To The Post-qualification Stage In Order To Finally Determine Who’s Responsiveness To The Technical And Financial Requirements Of The Project. The Contract Shall Then Be Awarded To The Lowest Calculated And Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification Procedure. Very Truly Yours, Hon.saifel M. Roble Brgy. Chairman Bayabas, Danao City

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services

Details: Description Invitation To Bid For 25ei0122 - Construction (completion) Of Multi-purpose Building At Barangay Lisap, Bongabong, Oriental Mindoro, Phase Ii 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction (completion) Of Multi-purpose Building At Barangay Lisap, Bongabong, Oriental Mindoro, Phase Ii/25ei0122. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building At Barangay Lisap, Bongabong, Oriental Mindoro, Phase Ii Contract Id No. : 25ei0122 Locations : Bongabong, Oriental Mindoro, Phase Ii Scope Of Works : Completion Of 1-unit Multti-purpose Building. This Includes Additional Concrete Works (moulding Of Windows & Kitchen Countertop), Paintings, Ceiling Works, Tile Works, Septic Tank, Cistern, Water Pumping System, Electrical & Mechanical Works. Installation Of Stainless Steel Signages, Decorative Stone, Railing, Fire Escape Ladder, Plumbing Fixtures, Windows, Kitchen Cabinet, Downspout, Catch Basin, Sewer Lines, Cold Water Lines, And Replacement Of Gutter Are Also Included. Approved Budget For The Contract : Php 2,970,000.00 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27, 2024 - January 16, 2025 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On January 3, 2025 At 10:00 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before January 16, 2025 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On January 16, 2025 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description Province Of Leyte Municipality Of Macarthur Invitation To Bid For Road Reblocking Of Local Road Phase Ii (procurement Project Is Undertaken Through Early Procurement Activity Or Epa) 1. The Municipality Of Macarthur, Leyte, Through 20% Edf 2025 Intends To Apply The Sum Of Five Million Pesos (php5,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Road Reblocking Of Local Road Phase Ii At Poblacion District Iii, Macarthur, Leyte. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. 2. The Municipality Of Macarthur, Leyte Now Invites Bids For Road Reblocking Of Local Road Phase Ii At Poblcaion District Iii, Macarthur, Leyte. Completion Of The Works Is Required Within Ninety (90) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Municipality Of Macarthur, Leyte And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00 Pm – Monday-friday From December 7, 2024 To December 26, 2024; 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 7, 2024 To December 26, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Municipality Of Macarthur, Leyte Will Hold A Pre-bid Conference On December 13, 2024 At 11:00 Am At The 2nd Floor Bac Office, Municipal Building, Macarthur, Leyte Which Shall Be Opened To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 26, 2024 At 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 26, 2024 At 11:00 Am At The 2nd Floor Bac Office, Municipal Building Macarthur, Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Macarthur, Leyte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Joventino Surigao Jr. Bac Secretary 2nd Floor Municipal Building Macarthur, Leyte Tiffany Lumpas Bac Chairperson Republic Of The Philippines Province Of Leyte Municipality Of Macarthur Municipal Engineer's Office Individual Project Program Of Work (1) Date: ______________________ (2) Office/agency: Lgu (3) Address: Macarthur Leyte (4) Name/location Of Project: (5) Sourc: (6) Issued: (7) Obligated: Development Of Sanitary Land Fill Phase I Poblacion District I, Macarthur, Leyte (8) Project Description: (9) Calendar Days To Complete: Development Of Sanitary Land Fill. 45 Calendar Days (10) Equipment To Be Used: Welding Machine, Concrete Bagger, Mixer, Walk Behind Compactor Concrete Vibrator And Rebar Cutter. (11) Technical/skilled Persons Required: (12) Implementing Procedure: Project Engineer, Construction Foreman, Plumber, Mason Carpenter, Steelman, Welder And Painter By Contract (13) Estimated Cost By Item Of Works Item No. (13.1) Scope Of Work To Be Done (13.2) % Of Total (13.3) Quantity (13.4) Unit (13.5) Unit Cost(13.6) Amount Spcl. I.billboard/ Signages Works 0.3% 5.76 Sq.m. 1,061.07, 6,111.79 B(1)a. Mobilization & Demobilization Works 1.38% 1.00 Lot. 27,530.69, 27,530.69 201. Earthworks 10.55% 288.00 Sq.m. 732.89, 211,072.88 311. Excavation Works 44.77% 139.08 Cu.m. 6,437.74, 895,361.51 104. Landfilling Works 39.50% 243.60 Cu.m. 3,242.69 789,919.36 B(1)b.layout & Scaffolding Works 2.89% 360.00 Sq.m 160,65, 57,834.71 B (1)c. Construction Safety& Health Works 0.61%, 2,357.20 M. Days 5.16 , 12,169.07 Total 100% Php2,000,000.00 (14) Breakdown Of Estimated Expenditures: % Of Total Amount (in Pesos) A. Direct Cost 81.40% Php1,628,088.13 B. O.c.m. (9% Of Total Direct Cost) 7.33% Php146,527.93 E. Contractor's Profit (8% Of Total Direct Cost) 6.51% Php130,247.05 F. V.a.t. 5% 4.76% Php95,136.89 Total Estimated Project Cost 100% Php2,000,000.00