Painting Tenders

Details: Description Invitation To Bid For 25ei0123 - Construction (completion) Of Multi-purpose Building At Barangay Cabugao, Bulalacao, Oriental Mindoro, Phase Ii 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction (completion) Of Multi-purpose Building At Barangay Cabugao, Bulalacao, Oriental Mindoro, Phase Ii/25ei0123. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building At Barangay Cabugao, Bulalacao, Oriental Mindoro, Phase Ii Contract Id No. : 25ei0123 Locations : Bulalacao, Oriental Mindoro, Phase Ii Scope Of Works : Construction Of 1-unit Multi-purpose Building ( Covered Court)(16 M X 30 M) At Brgy. Cabugao, Bulalacao, Phase Ii. This Includes Construction Of 2-layered Concrete Bleachers (30.1 M) At Front Side With Roofing, Installation Of End Wall Cover At Left And Right Side, Construction Of Sitwalls At Rear And Left Side, Installation Of Steel Matting Fence At All Sides, Plastering, Masonry And Steel Painting, Installation Of Basketball Goal Post And Electrical Works Including Installation Of High-bay Lights And Scoreboard. Approved Budget For The Contract : Php 2,970,000.00 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27, 2024 - January 16, 2025 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On January 3, 2025 At 10:00 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before January 16, 2025 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On January 16, 2025 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description 1st Invitation To Bid For 25pl0022 – Convergence And Special Support Program - Basic Infrastructure Program (bip) - Multi-purpose Buildings/ Facilities To Support Social Services - Construction Of Multi- Purpose Building, Barangay San Francisco, San Pascual, Lacnog West, Nambaran, Rizal, Tabuk City, Kalinga December 26, 2024 1. The Dpwh-lower Kalinga District Engineering Office, Through The Gaa 2025 Intends To Apply The Sum Of Php 8,910,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25pl0022 – Convergence And Special Support Program - Basic Infrastructure Program (bip) - Multi-purpose Buildings/ Facilities To Support Social Services - Construction Of Multi- Purpose Building, Barangay San Francisco, San Pascual, Lacnog West, Nambaran, Rizal, Tabuk City, Kalinga. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-lower Kalinga District Engineering Office, Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Convergence And Special Support Program - Basic Infrastructure Program (bip) - Multi-purpose Buildings/ Facilities To Support Social Services - Construction Of Multi- Purpose Building, Barangay San Francisco, San Pascual, Lacnog West, Nambaran, Rizal, Tabuk City, Kalinga Contract Id No. : 25pl0022 Locations : Tabuk City And Rizal, Kalinga Scope Of Works : Construction Of Column Footing, Column, Tie Beam, Slab On Fill, Beam, Second Floor Slab, Tile Works, Glass Partitions, Painting Works, Plumbing Works And Electrical Works Approved Budget For The Contract : Php 8,910,000.00 Contract Duration : 120 Cd 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh-lower Kalinga District Engineering Office And Inspect The Bidding Documents At Bulanao, Tabuk City, Kalinga During Weekdays From Mondays To Fridays At 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By The Interested Bidders On December 27, 2024 – January 16, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That The Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-lower Kalinga District Engineering Office Will Hold A Pre-bid Conference On January 3, 2025, 10:00 Am At Dpwh-lower Kalinga District Engineering Office, Conference Hall, Which Shall Be Open To Prospective Bidders. 9. Bid Submission May Be Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_lowerkalinga@dpwh.gov.ph For Electronic Submission On Or Before January 16, 2025, 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On January 16, 2025, 10:00 A.m At Dpwh-lower Kalinga District Engineering Office, Conference Hall. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh-lower Kalinga District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not To Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Bac Chairperson: Generoso T. Mukay Head –procurement Staff: Marivic T. Pagala Address: Dpwh-lower Kalinga Deo Address: Dpwh-lower Kalinga Deo Cellphone No. 0936-370-7985 Cellphone Nos. 0905-778-6534 Email Address: Dpwhlkdeobac@yahoo.com Email Address: Dpwhlkdeobac@yahoo.com Approved By: Generoso T. Mukay Bac Chairperson

Details: Description 1.the Local Government Unit Of The Municipality Of Magsaysay, Through The Local Government Support Fund- Financial Assistance (lgsf-fa) To Local Government Units Under The Fy 2023 General Appropriations Act Or Republic Act (ra) No. 11936 Intends To Apply The Sum Of Five Million Pesos Only (p 5,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Purchase Of Vehicle – 1 Unit Disaster Equipment/ Vehicle For Disaster Response And Rescue Activities – Fire Truck (2nd Call) In Barangay Poblacion, Magsaysay, Occidental Mindoro With Contract Identification Number Of Itb-2024-044. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the Local Government Unit Of The Municipality Of Magsaysay Now Invites Bids For The Purchase Of Vehicle – 1-unit Disaster Equipment/ Vehicle For Disaster Response And Rescue Activities – Fire Truck: Brand New 2000 Liters Stainless Steel P.t.o. Fire Truck 6-wheeler Unit Equipped W/ Side P.t.o. Driven Rear Mounted 1000 L.p.m. Fire Pump Unit Specifications: *engine: Japan Made Blue Power Diesel Engine With Manual Transmission (euro 4) - Engine Capacity: 2,999cc With Four Cylinder Diesel Engine *chassis: Brand New 6-wheeler Chassis With Large Carrier Type *differential: 5 Stud Heavy Duty 6-wheeler Heavy Duty Large Carrier Differential *water Tank: 2,000 Liters Water Capacity Oval Shape Imported Stainless Steel Water Tank - Water Level Indicator: Manual Type Water Level Indicator With Special Plastic Tubing With Aluminum Frame With Fittings *fire Pump: 1000 Liters Per Min (l.p.m.) Side Power Take Off Driven European Made ( Euro Standard )fire Pump -manufactured With High Quality Light Alloy Aluminum -single Stage Bronze Blower -complying With En (european) Iso 9001:2015 Certification -thermal Expulsion System (to Avoid Overheating) And Mechanical Stuffing Impermeability -self-priming With Automatic Suction System -vacuum Pump Made Of Etial 171 Aluminum Alloy -bronze (rg5 Gin 1705) Bearing Material -manually Controlled Electromagnetic Clutch For Vacuum Engaging -automatic Relieve System By Danfoss Pressure Transmitter -discharge Capacity Of 1000 Lpm - Gauges: 2023 Modern Design Pressure And Compound Gauges With Lcd Monitor System *power Take Off: Brand New Single Output Euro Grade Side P.t.o. (power Take Off) -p.t.o. Rpm Increaser: Equipped With Brand New Euro Grade 1/2.8 Rpm Increaser -european Made P.t.o. (class A) Side P.t.o. With R.p.m. Increaser -complying With En (european) Iso 14001:2015 Certification *equipped With Brand New Original Euro Grade Class A Power Take Off (p.t.o.) Drive Shafts *pump Connection: Stainless Steel Piping System -discharge Valve: 2 Sets Brand New Class A European-grade 2½” Anodized Aluminum Discharge Outlet Valves -suction Inlet: 1 Set Brand New Brass Suction Inlet -tank To Pump Valve: 1 Set Brand New 3” Japan-grade Tank To Pump Ball Valve *body (superstructure): Custom Fire Truck Superstructure “ Fire Tanker Style Body” -roll Up: 1 Set Imported Euro-grade Aluminum Roller Shutter § Designed For Pump Protection And Equipment Storage § Anodized Coating And High Quality Aluminum § Pipe-type Spring Locking For Opening And Closing The Roller Shutter § Specially Designed Aluminum Tumblers With Locking System § Plastic Cording For Water And Dust Proofing -crew Bench: Brand New Semi Open Type Compartment With Roof With Seating For 4 Men § Lined With High Quality Aluminum Checkered Plate Panels § Installed With Cushion For Seats With Plastic Protection -air Conditioning: Brand New Aircon Assembly For Front Cab Included -access Stairs: 2 Sets Custom Made Stainless Steel Access Stairs At The Middle Portion *fire Turret: Brand New Adjustable Nozzle Heart Shape Japan Grade Imported Fire Turret -made Out Of Bronze Bc6 (c83600), Which Is Ideal For Corrosive Environment -cast Ball Joints Fitted With Stainless Steel Ball Bearings And Lubricated With A Grease Mouth -stainless Steel Levers And Pvc Handles -2.5" Outlet Diamater With Angel Of Rotation At 85° Elevation Angle And 40° Depression Angle -capable Of 360° Rotation Adjustable Movement And 1 Types Of Water Output (adjustable) *painting: Imported Hipic High Quality Poly Urethane Paint “fire Red” Color *manufacturer And Supplier Iso Standard Minimum Requirement: -local Company Bidder And Supplier Manufacturer Must Have Iso 9001:2015 For Quality Management Standard For Supply, Delivery And Manufacture Of Fire And Rescue Vehicles. -local Registered Company Bidder And Supplier Must Be Registered In Trading, Sales And Supply Business For Fire Trucks For At Least Minimum Of 15 Years Or More To Assure Top Quality Experience & Training In Service And Maintenance With Specialized Equipments In The Industry. Delivery Of The Goods Is Required Within One Hundred Twenty (120) Calendar Days. Bidders Should Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4.interested Bidders May Obtain Further Information From Local Government Unit Of The Municipality Of Magsaysay And Inspect The Bidding Documents At The Address Given Below During Office Hours (8:00 Am To 5:00 Pm). 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 16, 2024 – January 06, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (p 5,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6.the Local Government Unit Of Magsaysay Will Hold A Pre-bid Conference On December 23, 2024 (10:00 Am) At The Office Of The Bids And Awards Committee, 2nd Floor, Municipal Building, Jp Laurel Street, Poblacion, Magsaysay, Occidental Mindoro Which Shall Be Open To Prospective Bidders. 7.bids Must Be Duly Received By The Bac Secretariat On Or January 06, 2025 (09:30 Am) Through Manual Submission At The Office Address As Indicated Below. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9.bid Opening Shall Be On January 06, 2025 (10:00 Am) At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10.the Local Government Unit Of The Municipality Of Magsaysay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description General Terms And Conditions • Items Shall Be Delivered/installed To: Dilg Eastern Samar Provincial Office, Capitol Site Brgy. Alang-alang, Borongan City • Delivery Period: Within Working/ Calendar Days From Receipt/acknowledgment Of The Purchase Order (po). • Price Validity Shall Be For A Period Covered In The Purchase Order. • Price Quotation Should Be Made With Extra Care Taking Into Account The Specifications And Unit Of Quantity To Avoid Errors. Bidders Bind Themselves To All The Conditions Stipulated In This Quotation. • Price Quoted Shall Be Inclusive Of Taxes, Delivery Charges, And Any Other Charges As May Be Prescribed By Law. • Cash On Delivery (cod) Is Not Acceptable. • Submission Of Multiple/alternative Bid Offers For One Item Shall Not Be Allowed. • The Bidder Must Specify The Brand Name Or Model Of Items With Check Marks. Failure To Indicate The Brand Name Or Model Signifies Non-compliance With The Terms And Conditions, Which Shall Be A Ground For Disqualification. • Withholding Taxes As Per Bir Rules And Regulations Will Be Deducted By Dilg Espo From The Contract Price. • Payment Shall Be Done After Each/complete Service/delivery, Subject To The Usual Inspection And Acceptance Requirements, And Submission Of The Complete Documentary Requirements. • The Winning Bidder Must Provide At His Own Cost, An Omnibus Sworn Statement Relative To The Herein Mentioned Transaction (for Abcs Above P50,000.00). • Warranty (if Applicable) 6 Months 1 Year 2 Years Others • In Case The Service Is Deemed Below Satisfactory, The Contract Of Purchase Order May Be Terminated/severed (for Long-term/multiple Delivery). • The Supplier Gives Consent To The Dilg Espo, Bac-twg To Conduct Tie-breaking Through Draw Lots/toss Coin, In Case Of Tie-quotations. • The Bidder Shall Coordinate With The Dilg Espo For The Conduct Of Ocular Inspection, And For The Issuance Of Site Inspection Certificate. • The Site Inspection Certificate Shall Be Submitted Together With The Eligibility Documents. • The Bidder Shall Indicate The Unit Price And The Total Price Per Line Requirements. • The Bidder Shall Submit An Updated Philippine Contractors Accreditation (pcab) License Item No. Qty Unit Item Specification Brand/model Unit Cost Total Price "repairs And Maintenance Of The Dilg Provincial Office Building And Capital Outlay (other Machineries And Equipment) At Dilg Eastern Samar Provincial Office Approved Budget For The Contract (abc) : Php 145,996.19 Contract Duration : 15 Calendar Days I. 1.00 Ls Removal Of Existing Structures No. Of Person/s Labor: 24.00 Hrs. 1 Construction Foreman 24.00 Hrs. 3 Unskilled Laborer Sub-total Cost Php Equipment: Minor Tools Sub-total Cost Php Material: Sub-total Cost Php Direct Cost Php Overhead/contingencies/miscellaneous(15% Of D.c.) Contractor's Profit(10% Of D.c.) Vat(d.c.+ocm+cp)*5% Indirect Cost Php Total Cost For This Item Php Ii. 1.00 Ls Installation Of Roofing Accessories No. Of Person/s Labor: 32.00 Hrs. 1 Construction Foreman 32.00 Hrs 2 Skilled Laborer 32.00 Hrs. 2 Unskilled Laborer Sub-total Cost Php Equipment: 8.00 Hrs. 1 Welding Machine Minor Tools, 10% Of Labor Cost Sub-total Cost Material: 6.00 Pcs Pre-painted Ridge Roll, Ga. 24 (0.701mm) X 2.44 4.00 Pcs Pre-painted Valley Gutter, Ga. 24 (0.701mm) X 2.44 4.00 Pcs Pre-painted Valley Cap 5.00 Pcs Sealant 1.00 Gal Vulcaseal 20.00 Kg Tekscrew 2.5” 3.00 Pcs Angle Bar 2x3 1.00 Box Welding Rod 2.00 Pcs Roof Drain Miscellaneous (5% Material Cost) Sub-total Cost Php Direct Cost Php Overhead/contingencies/miscellaneous(15% Of D.c.) Contractor's Profit(10% Of D.c.) Vat(d.c.+ocm+cp)*5% Indirect Cost Php Total Cost For This Item Php Iii. 3.20 Sq.m. Structure Excavation No. Of Person/s Labor: 8.00 Hrs. 1 Construction Foreman 8.00 Hrs. 3 Unskilled Laborer Sub-total Cost Php Equipment: Minor Tools, 10% Of Labor Cost Sub-total Cost Material: Sub-total Cost Php Direct Cost Php Overhead/contingencies/miscellaneous(15% Of D.c.) Contractor's Profit(10% Of D.c.) Vat(d.c.+ocm+cp)*5% Indirect Cost Php Total Cost For This Item Php Iv. 3.68 Cu.m Concrete Works No. Of Person/s Labor: 40.00 Hrs. 1 Construction Foreman 40.00 Hrs. 2 Skilled Laborer 40.00 Hrs. 3 Unskilled Laborer Sub-total Cost Php Equipment: Minor Tools, 10% Of Labor Cost Sub-total Cost Material: 30.00 Bags Portland Cement 1.84 Cum Sand 3.68 Cum Gravel 13.00 Pcs 16mm Rsb, Grade 40 6.00 Pcs 12mm Rsb, Grade 40 4.49 Kg Gi Tie Wire 8.00 Pcs Ordinary Plywood, ¼ 20.00 Pcs Coco Lumber 10.00 Kgs Assorted Cwn Sub-total Cost Php Direct Cost Php Overhead/contingencies/miscellaneous(15% Of D.c.) Contractor's Profit(10% Of D.c.) Vat(d.c.+ocm+cp)*5% Indirect Cost Php Total Cost For This Item Php V. 1.00 Set Installation Of Storage Tank Vertical No. Of Person/s Labor: 4.00 Hrs. 1 Construction Foreman 4.00 Hrs. 2 Skilled Laborer 4.00 Hrs. 2 Unskilled Laborer Sub-total Cost Php Equipment: Sub-total Cost Material: 1.00 Set Bestank Polyethylene Storage Tank Vertical, 1000 Lit Capacity 1.00 Unit Float Valve Sub-total Cost Php Direct Cost Php Overhead/contingencies/miscellaneous(15% Of D.c.) Contractor's Profit(10% Of D.c.) Vat(d.c.+ocm+cp)*5% Indirect Cost Php Total Cost For This Item Php Total Project Cost

Details: Description Clustered Infrastructure Projects P 426,560.00 1. Construction Of Barangay Out-post Location: Bagadion, Libmanan, Camarines Sur Appreciation: P 326,560.00 Source Of Fund: P 100,000.00 - General Fund C/y 2024 P 226,560.00 - Capital Outlay - Continuing C/y 2023 Description: Earthworks Concrete Works Roofing And Framing Works Masonry Works Door Installation Steel Works Electrical Works I. Earthworks I.a. Excavation Estimated Quantity= 3.42 Cu.m 3.42 Cu.m Soil Excavate I.b. Gravel Bedding Estimated Quantity= 0.29 Cu.m 0.29 Cu.m Soil Excavate Ii. Concrete Works Estimated Quantity= 3.50 Cu.m A. Materials 34 Bags Cement 2 Cu.m Washed Sand 4 Cu.m 3/4" Crushed Gravel 33 Pcs 16mm Rsb 7 Pcs 12mm Rsb 51 Pcs 10mm Rsb 11 Pcs 1/4" Thk Ordinary Plywood 347 Bdft Formlumber 1 Kgs #16 Tie Wire 5 Kgs Assorted Cw Nail B. Labor C. Equipment Rental For 1 Days 1 Unit Concrete Bagger Mixer Iii. Roofing And Framing Works Estimated Quantity= 1 Lot A. Materials 13 Pcs 2" X 2" Angle Bar 2 Pcs 1" X 1" Angle Bar 6 Pcs 2 X 3" C- Purlin 5 Pcs 0.6mm Thk Corrugated Roof Sheet 10ft 3 Pcs 0.6mm Thk Corrugated Roof Sheet 12ft 2 Pcs 0.6mm Thk Pre-painted Ridge Roll 8ft 3 Pcs 0.6mm Thk Pre-painted End Flashing 8ft 3 Pcs 12mm X 12" X 8" Fascia Board 114 Pcs Tekscrew 5 Kgs Welding Rod 5 Pcs Cutting Disc 1 Can Roof Sealant 1/2 Ltr B. Labor C. Equipment Rental For 3 Days 1 Unit Welding Machine W/ Genset Iv. Masonry Works Estimated Quantity= 33.58 Sq.m A. Materials 441 Pcs 6" Chb 75 Bags Cement 5 Cu.m Washed Sand 14 Pcs 10mm Rsb 14 Pcs 8mm Rsb 2 Kgs #16 Tie Wire B. Labor V. Door Installation Estimated Quantity = 1 Lot A. Materials A D Labor (installation) 1 Unit 0.90m X 2.10m Wooden Flush Door With Jamb And Complete Accessories Vi. Steel Works Estimated Quantity= 1 Lot A. Materials 6 Pcs 12mm Square Bar 2 Pcs Cutting Disc 1 Kgs. Welding Rod 1 Lit Metal Promer 1 Pc Paint Brush 2" B Labor C. Equipment Rental For 1 Day 1 Unit Welding Machine W/ Genset Vii. Electrical Works Estimated Quantity= 1 Lot A. Materials 3 Sets 18 Watts E27 Surface Mounted Led Light 1 Set 2 Gang Switch W/ Plate 3 Sets Duplex Convenience Outlet W/ Grounding 8 Pcs Junction Box 8 Pcs Utility Box 15 Pcs 20mm (3/4") Pvc Adapter 5 Pcs 20mm (3/4) Pvc Conduit 2 Pcs 25mm (1") Pvc Conduit ( Feeder) 3 Pcs 25mm (1") Pvc Adapter (feeder) 3 Pcs 25mm (1") Pvc Clamp ( Feeder) 1 Pc 25mm (1")weatherhead Cap 1 Pc Upvc Square Pull Box 4" X 4" 1 Kgs #16 Tie Wire 1 Set Nema 1 Panel Board 4 Branches Plug-in 50 M 3.5mm2 Thhn (#12 Awg) 5 M 8.0mm2 Thhn (#8 Awg ) 10 M 14.0mm2 Thhn ( # 6 Awg ) 2 Pcs Electrical Tape (big) 1 Pc 15 At, 2p,plug-in Type Cb 1 Pc 20at , 2p, Plug -in Type Cb 1 Pc 60 At, 2p, Plug-in Type Cb 30 M Service Drop ( #6 Awg ) B. Labor C. Tapping Fee Spl I Project Billboard 1 Pc Billboard With Frame ( 8ft X 8ft ) Spl Ii Construction Safety & Health 3 Pcs Uniform 3 Pcs Hard Hat 3 Pcs Safety Boots 3 Pcs Gloves Spl Iii - Photographs 1 Lot Photographs ************************************ 2. Concrete Pathway Location: Zone 2, Bagadion, Libmanan Cam. Sur Appropriation: P 100,000.00 Source Of Fund: Gad Fund C/y 2024 Description: Carriageway: L = 24.5 M W= 2.00 M T= 0.15 M I - Item 105 -sub -grade Preparation Estimated Quantity = 49.0 Sq.m 49.0 Sq.m Sub-grade Preparation Ii- Item 200 Aggregate Subbase Coarse Estimated Quantity= 9.00 Cu.m A. Materials ( Delivered To Site ) 9.00 Cu.m Aggregate Subbase Coarse B. Labor 1 Foreman 4 Helper C. Equipment Rental ( For 1 Day ) 1 Unit Plate Compactor D. Hauling Cost 7.92 Cu.m Aggregate Subbase Coarse Iii Item 311- Portland Cement Concrete Pavement Estimated Quantity= 4.80 Cu.m A. Materials 67 Bags Cement 8 Cu.m 3/4 Crushed Gravel 4 Cu.m Washed Sand 177 Bdft 2" X 6" X 12 Ccl 2 Kgs Assorted Cw Nail C. Equipment Rental ( For 1 Day ) 1 Unit Concrete Bagger Mixer Special Item Spl 1 Project Billboard 1 Pc Project Billboard (8'x8') Spl Ii . Construction Safety & Health 1 Lot Const. Safety And Health Spl Iii - Photograph 1 Lot Photograph

Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Bids And Awards Committee Provincial Capitol, Estaka, Dipolog City Email Add: Bidsandawards22@gmail.com December 05, 2024 Invitation To Bid The Provincial Government Of Zamboanga Del Norte Through The Bids And Awards Committee (bac) Is Inviting Interested Parties/ Bidders To Bid For The Following Contract: Contract Id: Pr#300(18)24-12-499(o) & 300(18)24-12-498(o) Contract Name: Procurement Of General Merchandise (hardware And Construction Supplies) Location/purpose: For The Use In The Repair & Improvement Of Primary Clinical Laboratory At Sibuco Hospital, Poblacion, Sibuco, Zamboanga Del Norte. Approved Budget For The Contract (abc): Pr#300(18)24-12-499(o) – P169,833.62 Pr#300(18)24-12-498(o) - 2,856.00 Grand Total P172,689.62 (inclusive Of All Applicable Taxes)  Bidders/contractors Must Have An Expertise In Undertaking A Similar Project, Completed At Least Two Similar Contracts Which The Equivalent Amount Is At Least 25% Of The Proposed Project For Bidding Within The Last Three Years.  Bidders Are Inform That The Delivery Term Is 30 Calendar Days Upon Receipt Of Notice To Proceed.  Bidders/ Contractors Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents  Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates.  The Eligibility Check/ Screening As Well As The Preliminary Examination Of Bids Shall Use The Non- Discretionary "pass/ Fail" Criteria.  Post Qualification Of The Lowest/ Single Bids Shall Be Conducted.  All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of The Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr).  All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 14.  Bidding Is Restricted To Filipino Citizens/ Sole Proprietorships, Partnerships Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting December 06 - 12, 2024 Availability And Issuance Of Bidding Documents December 06 - 13, 2024@ 08:30am Deadline For The Submission Of Bids December 13, 2024@ 08:30 Am Bid Opening And Evaluation December 13, 2024@ 09:00am  Payment For Bidding Documents Is A Non- Refundable Amount Of Five Hundred Pesos Only (php500.00) Payable To The Office Of The Provincial Treasurer, Provincial Capitol Building, Dipolog City.  Prospective Bidders May Obtain Further Information From The Office Of The Bids And Awards Committee, Provincial Capitol Building During Office Hours @ 8:00am - 5:00pm.  Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Stated Above.  The Provincial Government Of Zamboanga Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.  Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The Provincial Office Of Zamboanga Del Norte At Bidsandawards22@gmail.com. Atty. Rafael R. Osabel, Jr. Bac Chairman Annex A: Procurement Of General Merchandise (hardware And Construction Supplies) Pr#300(18)24-12-499(o) Abc: P169,833.62 1. 41 Bags Portland Cement 2. 66.6 Kgs Dsb 10mm Ø X 6.0m (18 Pcs) 3. 270 Pcs 100 Mm Thk Chb 4. 1 Kgs Tie Wire #16 5. 15 M Pvc Pipe 50mmø, Series 1000 (5 Pcs) 6. 9 M Pvc Pipe 100mmø, Series 1000 (3 Pcs) 7. 12 Ea 2” Ø Pvc Elbow 90° 8. 8 Ea 2” Ø Pvc Elbow 45° 9. 8 Ea 2”ø X 2”ø Pvc Wye 10. 2 Ea 2”ø Pvc Clean-out W/ Plug 11. 1 Ea 2”ø Pvc Tee 12. 2 Ea 4”ø Pvc Clean-out W/ Plug 13. 4 Ea 4”ø Pvc Elbow 90° 14. 5 Ea 4”ø Pvc Elbow 45° 15. 4 Ea 4”ø X 4”ø Pvc Wye 16. 3 Ea 4”ø Pvc Coupling 17. 8 Cans Solvent Cement – 400c 18. 18 Pcs 1/2"ø Pvc Elbow 19. 7 Pcs 1/2"ø Pvc Tee 20. 3 Pcs 1/2"ø Pvc Coupling 21. 3 Pcs 1/2"ø Pvc Female Adoptor 22. 5 Pcs 1/2"ø Pvc Male Adoptor 23. 1 Pc 1/2"ø Gate Valve 24. 5 Rolls Teflon Tape 3/4” 25. 6 Pcs Pvc Pipe 13mmø, Blue 26. 3 Sets Water Closet With Complete Fittings & Accessories 27. 2 Sets Countertop Lavatory With Complete Fitting & Accessories 28. 3 Sets Stainless Floor Drain 4” X 4” 29. 3 Pcs Stainless Faucet 1/2"ø 30. 17 Pcs Fiber Cement Board 6mm 31. 20 Pcs Metal Studs 0.60mm Thk X 35mm X 76mm X 3.0m 32. 7 Pcs Metal Tracks 0.60mm Thk X 35mm X 76mm X 3.0m 33. 2626 Pcs Blind Rivets 1/8”ø X 1/2" 34. 90 Pcs Metal Screw 1” 35. 3 Sets Door Knob 36. 5.04 M² Wooden Panel Door 0.80m X 2.10m 37. 5 Sets Loosepin Hinges 4” X 4” 38. 3 Pcs 1/8” Thk X 2” X 4” Rectangular Aluminum Tube, Analoc (for Door Jamb & Header, 3-sets D-1) 39. 15.84 M² Unglazed Tiles 0.60m X 0.60m (44 Pcs) 40. 7 Bags Tile Grout 41. 1 Pc Diamond Cutting Wheel 4” 42. 38.16 M² Glazed Tiles 0.60m X 0.60m (106 Pcs) 43. 6 Bags Tile Adhesive (25kg/bag) 44. 1 M Hardware Cloth 45. 1 Gals Concrete Neutralizer 46. 2 Gals Concrete Sealer/primer 47. 2 Gals Patching Compound 48. 4 Gals Semi-gloss (two Coat) 49. 4 Pint Tinting Color (optional) 50. 2 Sets Roller Paint 6” W/pan 51. 2 Pc Paint Brush 2” 52. 1 Pc Paint Brush 4” 53. 20 Pcs Sand Paper #120 54. 3 Gals Glazzing Puty 55. 2 Gals Flatwall Enamel 56. 2 Gals Quick Dry Enamel 57. 4 Gals Paint Thinner 58. 3.78 M² 0.60m X 2.10m Pvc Door W/ Jamb & Comp. Acc., (3 Sets) 59. 1 Pc Hacksaw Blade 60. 12 Pcs Led Bulb, 12 Watts 61. 12 Pcs Receptacle Socket 2”ø Plastic 62. 2 Rolls Electrical Tape, Big Sub-total: P169,833.62 Pr#300(18)24-12-498(o) Abc: P2,856.00 1. 3.5 M3 Sand Sub-total: P2,856.00 Grand Total: P172,689.62 ***nothing Follows***

Description: CATEGORY: Ball casters size 50 mm without plate 05 Nos in each set , Bathroom Cabinet mirror PVC L 622mm W 12mm , Bib cock brass 15mm , Bib Cock CP 15 mm , Bib Cock CP long body 15 mm , Bib Cock PVC 15mm , Bib Cock PVC long body 15mm , Block Board L 8ft W 4ft 19mm thickness , Blue tek , Brush for white Wash Boot Brush , Butt hinges MS 100mm , Cement OPC 50 Kg bag 43 grade , Connection pipe PVC size 15mm dia 450 mm long , CP Angle cock 15 mm , CP brass telephonic hand shower with tube 1500mm long , CP Handle 75 mm for table bed side MAP with machine screw , CP Health faucet with hook and 1 mtr tube15mm dia , CP Towel ring Round , CP Tubular towel rail 20mm dia and 600 mm long body , CPVC Brass elbow 20 to 15mm , CPVC end cap 20mm , CPVC FTA Brass 20mm , CPVC FTA Plastic 20mm , CPVC MTA Brass 15mm , CPVC MTA Brass 20mm , CPVC pipe 15mm , CPVC Pipe 20mm , CPVC pipe clip 20mm , CPVC plain elbow 15mm , CPVC Plain Elbow 20mm , CPVC Plain Tee 20mm , CPVC Socket brass 15mm , CPVC Socket brass 20mm , CPVC Socket plain 20mm , CPVC Solvent cement 100ml , CPVC Union Plain Socket 20mm , Curtain bracket alu 15mm , Curtain bracket aluminium silver 20mm dia , Curtain bracket steel 15mm , Curtain rod Aluminium silver 20mm dia 20 guage , Curtain rod holder Lattu 20mm silver CP , Curtain rod redge steel 15 mm dia , Dendrite 1 Ltrs pack , Distemper oil bound White 1 Kg in pack , Door Stoper Alumunium double , Fevicol SH 1 Kgs pack , Float valve PVC 20 mm dia , Float valve PVC 25 mm dia , Flushing cistern PVC low level 10 Ltr capacity complete , French Polish , Full thread star screw 25 mm dia in 100 Nos pack , GI Elbow 15 mm dia ISI mark , GI Plug 15 mm dia , GI Plug 20 mm dia , GI Reducer socket 25mm dia to 20mm dia ISI marked , GI Socket 15 mm ISI mark , GI Socket 20 mm ISI mark , GI Tee 15 mm ISI mark , GI Tubing Med Gde 15 mm IS 1239 , Grating CP 100 mm with hole , Jet spray 1 point 5m tube 15mm CP , Kitchen rack S S L 24 inch W 30inch D 10inch , Kitchen rack SS superior quality size L 36 inch W 36 inch D 10 inch , Knob for side board dressing table writing table etc , Masonary star screw full thread 20mm guage 8mm in 100 Nos pack , Melamine high glossy , Mirror for dressing table Ladies L 48 inch W 18 inch , Mirror Looking L 20 inch W 16 inch with PVC frame , MS Screw Wood 35 mm 8 gauge 100 Nos in Pack , Nipple GI 15 mm dia 2inch long , Nipple GI 15 mm dia 4inch long , Oil putty for glazing , Particle board Prelaminated L 2400mm W1200 mm thickness 12mm , Pegs alluminium 100 mm , Pillar cock fancy type 15 mm CP , Ply teak face L 8 ft W 4 ft thickness 4 mm , Ply wood Commercial L 8 W 4 thickness 8mm BWR , Ply wood Commercial L 8 ft W 4 ft thickness 12mm BWR , Plywood L 8 ft W 4 ft thickness19mm BWR , Plywood commercial L 7 ft W 3ft thickness 12 mm BWR , PVC Angle cock 15 mm , PVC Elbow 40mm , PVC Flush bend 40 mm , PVC Waste coupling 50 mm for Stainless steel Kitchen sink , Red oxide Primer 1 Ltr in pack , Seat Cover plastic for EWC White Colour , Shower rose CP 15 mm , Spirit denatured 5 Ltr Pack , Stop cock Brass 15 mm External Thread , Teflon tape white , Thinner , Touch wood in 1 Ltrs pack , Tower bolt alu 150mm 13mm barrel dia , Wall mixer 3 in 1 with L Bend 15 mm , Waste pipe PVC 32 mm , White cement 1 kg pack , Wire mesh GI 0 point 56 mm nominal dia of wire and average width of aperature 1 point 18mm , Enamel, Synthetic, Exterior (A) Under Coating (B) Finishing Paint (V3) Confirming to IS 2932 (Q3)

Details: The purpose of this contract is to provide routine maintenance work and minor repairs (electricity, plumbing, sanitation, painting, partitions, flexible floors, false ceilings, carpentry, metalwork, etc.) for the Economic, Social and Environmental Council.

Details: Description 1. 27 Bags Cement 2. 3 Cu.m. Crushed Gravel 3/4 3. 2 Cu.m. Sand 4. 70 Pcs. 10mm Rsb 5. 20 Pcs. 2" X 3" X 12' Coco Lumber 6. 3 Kgs. Assorted Cw Nail 7. 2 Pcs. 1/4" Thk Marine Plywood 8. 4 Kgs. #16 Tie Wire 9. 35 Bags Cement 10. 677 Pcs. 100mm Thck Chb 11. 10 Cu.m. Sand 12. 20 Pcs. 10mm Rsb 13. 2 Pcs. Hacksaw Blade 14. 1 Kg. #16 Tie Wire 15. 6 Pcs. 2" X 4" X 14' Good Lumber 16. 18 Pcs. 2" X 3" X 12' Good Lumber 17. 4 Pcs. 2" X 2" X 12' Good Lumber 18. 7 Pcs. 1" X 10" X 10' Fascia Board 19. 8 Pcs. Corrugated Roof Sheet (8ft.) 20. 8 Pcs. Corrugated Roof Sheet (6ft.) 21. 4 Pcs. End Flashing 22. 2 Pcs. 1/4" Thk Marine Plywood 23. 1 Pc. Heavy Duty Door Knob 24. 3 Pcs. Heavy Duty Door Hinges (3" X 3") 25. 6 Kgs. Assorted Cw Nail 26. 300 Pcs. Tekscrew 2 1/2" 27. 4 Pcs. 12mm Square Bar 28. 2 Pcs. 3/4" G.i. Pipe S40 29. 4 Pcs. 1/2" G.i. Pipe S40 30. 2 Kgs. Welding Rod (2.5mm) 31. 1 Lit. Metal Primer (red Oxide) 32. 1 Pc. 1" Paint Brush 33. 1 Pc. Grinding Stone 34. 1 Set 1.2 X 1.2m Steel Casement Window W/ Grills

Details: Delivery and installation of a multi-split air conditioning system for 6 rooms, house 33, level 2 (board) including all additional construction services such as drywall, GLT and ELT connection as well as painting services