Paint Tenders

Details: Description Invitation To Bid For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Cattle Breeder House 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2024 Intends To Apply The Sum Of Eight Million Pesos (php8,000,000.00) With Project Identification Number Da-rfo-1-2024-infra-033 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot, To Wit: Project Title Abc (php) Lot 1: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Two (2) Units Cattle Breeder House In Brgy. Caparispisan, Pagudpud, Ilocos Norte And Brgy. Duripes, Bacarra, Ilocos Norte 2,000,000.00 Lot 2: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Two (2) Units Cattle Breeder House In Brgy. Bungon, Batac City, Ilocos Norte And Brgy. San Julian, Bantay, Ilocos Sur 2,000,000.00 Lot 3: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Three (3) Units Cattle Breeder House In Manaoag, Pangasinan, Brgy. Calunetan, Sison, Pangasinan And Brgy. Cacandungan, Natividad, Pangasinan 3,000,000.00 Lot 4: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of One (1) Unit Cattle Breeder House In Brgy. Baraoas, City Of San Fernando, La Union 1,000,000.00 Total 8,000,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Specifications: Specifications Project Locations/sites: Lot 1:brgy. Caparispisan, Pagudpud, Ilocos Norte Brgy. Duripes, Bacarra, Ilocos Norte Lot 2:brgy. Bungon, Batac City, Ilocos Norte Brgy. San Julian, Bantay, Ilocos Sur Lot 3:brgy. Cabanban, Manaoag, Pangasinan Brgy. Calunetan, Sison, Pangasinan Brgy. Cacandungan, Natividad, Pangasinan Lot 4:brgy. Baraoas, City Of San Fernando, La Union Project Description: Construction Of 135 Sq.m. Cattle House With Loafing Area, Feeding Through, Chute And Perimeter Fence. Scope Of Work (per Unit): Description Qty Unit I. General Requirements (permit & Project Billboard) 1.00 Lot Ii. Mobilization And Demobilization 1.00 Lot Iii. Safety And Health 1.00 Lot Iv. Earthworks 37.00 Cu.m. V. Rsb Works 1,000.00 Kgs Vi. Form Works & Scaffoldings 520.00 Bd.ft. Vii. Concrete Works (class A) 26.00 Cu.m. Viii. Masonry Works (including Plastering) 30.00 Sq.m. Ix. Steel Works 1.00 Lot X. Tinsmithry Works 186.00 Sq.m. Xi. Painting Works 1.00 Lot Xii. Electrical Works 1.00 Lot Minimum Technical Personnel Required: • 1 Project Engineer • 1 Foreman • 6 Skilled Workers • 8 Unskilled Workers Minimum Equipment Required: • 1 Bar Cutter • 1 One-bagger Mixer • 1 Welding Machine • 1 Cut-off Machine • 1 Fusion Machine • 1 Grinder Completion Of The Works Is Within Seventy (70) Calendar Days (per Unit). Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours At 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture - Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 5-25, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Project Title Bid Docs Fee Lot 1: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Two (2) Units Cattle Breeder House In Brgy. Caparispisan, Pagudpud, Ilocos Norte And Brgy. Duripes, Bacarra, Ilocos Norte 5,000.00 Lot 2: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Two (2) Units Cattle Breeder House In Brgy. Bungon, Batac City, Ilocos Norte And Brgy. San Julian, Bantay, Ilocos Sur 5,000.00 Lot 3: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Three (3) Units Cattle Breeder House In Manaoag, Pangasinan, Brgy. Calunetan, Sison, Pangasinan And Brgy. Cacandungan, Natividad, Pangasinan 5,000.00 Lot 4: Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of One (1) Unit Cattle Breeder House In Brgy. Baraoas, City Of San Fernando, La Union 1,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. Note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 13 November 2024, 10:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 25 November 2024, 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 25 November 2024, 10:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa; C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Requirements May Be Soft-bound/fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed, As Needed, By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No.:(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ November 4, 2024 Approved By: Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2024-infra-033

Details: Description Invitation To Bid Supply And Delivery Of Various Machineries And Equipment For The Implementation Under Noap 2025 1. The Department Of Agriculture Regional Field Office No. 5 (da Rfo 5), Through The National Expenditure Program (nep) For Fy 2025-organic Agriculture Program Intends To Apply The Sum Of Two Million Five Hundred Fifty Thousand Pesos (php2,550,000.00) Being The Total Abc To Payments Under The Contract For Itb No. 03-goods-oap-2025 , As Follows: Description Abc (php) (inclusive Of Vat) Funding Source Supply And Delivery Of Various Machineries & Equipment: • One (1) Unit Corn/hammer Mill 200,000.00 Nep Oap-paef 2025 • Two (2) Units Multi-commodity Pulverizer 300,000.00 • One (1) Unit Feed Mixer 500,000.00 • One (1) Unit Feed Pellet Cooler 350,000.00 • Three (3)units Pelletizer (for Feeds Use) 900,000.00 • One (1)unit Pelletizer (for Fertilizer Use) 300,000.00 Total Php2,550,000.00 Bi Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Partial Bid Is Not Allowed. 2. The Department Of Agriculture Regional Field Office No. 5 Now Invites Bids For The Following: Description Location Of Project Specifications Unit Price Delivery Of The Goods Supply And Delivery Of Various Machineries And Equipment: 45 Calendar Days Upon Receipt Of Notice To Proceed (ntp) • 1 Unit Corn/hammer Mill Camarines Sur Corn/hammer Mill Prime Mover 4 Stroke, Air Cooled Diesel Engine Power Requirement: 12hp, Max Design And Performance Materials: Any Uncoated Metallic Surfaces Shall Be Free From Rust And Shall Be Painted Properly Swinging Type Hammer Mill Input Capacity: 250 Kg/hr Min With Replaceable Milling Screens Product Output Finess Modulus: 6% Max Attachments/ Accessories Provided With At Least One (1) Spare Hammer Collecting Bin For Discharge Outlet Including Dust Collection System With Set Of Standard Tools Amtec Tested, With Valid Amtec Test Result For Osh: Provision Of Two (2) Pairs Of Safety Gloves Per Unit; Provision Of Two (2) Pcs Of Industrial Face Masks Per Unit 200,000.00/ Unit • 2 Units Multi-commodity Pulverizer Camarines Sur Multi Crop Pulverizer Prime Mover 4 Stroke, Air Cooled Gasoline Engine Power Requirement: 5-6hp Design And Performance Materials: Food Grade, Non Corrosive Steel Input Capacity: 25kg/hr, Min Pulverizing Recovery: 95% Min Pulverizing Efficiency: 90% Min Application: Adaptable To Dried Fruits, Vegetables And Grains With Provision Of 90-100 Stainless Steel Mesh Attachments/ Accessories Provided With At Least One (1) Food Grade Collecting Containers Provided With Set Of Screens With Set Of Standard Tools Amtec Tested, With Valid Amtec Test Result For Osh: Provision Of Two (2) Pairs Of Earmuffs Per Unit; Provision Of Two (2) Pcs Of Industrial Face Masks Per Unit (300,000.00) 150,000.00/ Unit • One (1) Unit Feed Mixer Camarines Sur Feed Mixer Prime Mover Engine:12 Hp Air Cooled Diesel Engine Power: 85% Min Of Rated Power Design And Performance Material: Food Grade, Non Corrosive Steel Horizontal Or Vertical Type Mixing Device Mixing Rate: 500kg/hr, Minimum Attachments/ Accessories Equipped With Stainless Collector With Set Of Standard Tools Amtec Tested, With Valid Amtec Test Result For Osh: Provision Of Two (2) Pairs Of Earmuffs Per Unit; Provision Of Two (2) Pairs Of Safety Gloves Per Unit 500,000.00/ Unit • One (1) Unit Feed Pellet Cooler Camarines Sur Feed Pellet Cooler Prime Mover Power Requirement: 0.75+2.2kw, Electric Motor Voltage: 220-230v Design And Performance Capacity: 300-500kg/hr, Min For Osh: Provision Of Two (2) Pairs Of Safety Gloves Per Unit; Provision Of Two (2) Pcs Of Industrial Face Masks Per Unit 350,000.00/ Unit • Three (3) Units Pelletizer (for Feeds Use) 2 Units Camarines Sur 1 Unit Catanduanes Pelletizer (for Feeds) Prime Mover Electric Motor Power Requirement: 5hp, Min. Voltage: 220-230v Single Phase Design And Performance Capacity: 145kg/hr Min. Material: Food Grade, Non-corrosive Steel Type Of Die: Flat Die Performance And Other Requirements Pelleting Efficiency: 92%, Min Pelleting Recovery: 95%, Min Attachments/ Accessories Equipped Stainless Collector Of Pellet With Adjustable At Least Three (3) Sets Die Dia With Set Of Standard Tools Amtec Tested, With Valid Amtec Test Result For Osh: Provision Of Two (2) Pairs Of Earmuffs Per Unit; Provision Of Two (2) Pairs Of Safety Gloves Per Unit; Provision Of Two (2) Pcs Of Industrial Face Masks Per Unit (900,000.00) 300,000.00/ Unit • One (1) Unit Pelletizer (for Fertilizer Use) Pelletizer (for Fertilizer) Prime Mover Electric Motor Power Requirement: 5hp, Min. Voltage: 220-230v Single Phase Design And Performance Capacity: 145kg/hr Min. Material: Food Grade, Non-corrosive Steel Type Of Die: Flat Die Performance And Other Requirements Pelleting Efficiency: 92%, Min Pelleting Recovery: 95%, Min Attachments/ Accessories Equipped Stainless Collector Of Pellet With Set Of Standard Tools Amtec Tested, With Valid Amtec Test Result For Osh: Provision Of Two (2) Pairs Of Earmuffs Per Unit; Provision Of Two (2) Pairs Of Safety Gloves Per Unit; Provision Of Two (2) Pcs Of Industrial Face Masks Per Unit 300,000.00/ Unit Requirements: • Must Have A Service Center Within The Region Conforming To Paes 192-2016 • Brand Must Have Been Existed In The Philippine Market For The Last 25 Years • With Steel Plate Da Logo Attached • With System Operation And Maintenance Manual For Both Operator And Da-raed • With Product Demonstration And Operations & Maintenance Training (including Fuel And Materials For Demonstration) • With Namdac Certificate Of Accreditation • With Pto Certification • With Certificate Of Conformity (cc) And Authority To Use Of Cc From Distributor • Certificate Of Dealership For Brand Being Offered Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Da Rfo 5, Bac Secretariat Office, San Agustin, Pili, Camarines Sur And Inspect The Bidding Documents At The Address Given Below During Mondays – Fridays, 8:00 Am To 5:00 Pm Except For Holidays, Saturdays And Sundays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - November 27, 2024 (9:00 Am) From The Given Address And Website(s)below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents, Shall Be On Per Lot Basis. Should The Prospective Bidder Participate In Two (2) Or More Items, The Cost Of The Bidding Documents Shall Be Based On The Sum Of The Abcs Of Items To Be Bid. Description Abc (php) (inclusive Of Vat) Cost/price Of Bid Documents (cash Payment Only)(php Supply And Delivery Of Various Machineries And Equipment One (1) Corn-hammer Mill 2,550,000.00 5,000.00 Two (2) Units Multi-commodity Pulverizer One (1) Unit Feed Mixer One (1) Unit Feed Pellet Cooler Three (3) Pelletizer (for Feeds Use) One (1) Pelletizer (for Fertilizer Use) Total Php 5,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. 6. The Da Rfo 5 Will Hold A Pre-bid Conference On November 15, 2024; 10:00 Am At 3rd Flr. Training Hall, Operations Bldg., Da Rfo-5, San Agustin, Pili, Camarines Sur, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before November 27, 2024; 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024; 10:00 Am Onwards At The Given Address Below 3rd Flr. Training Hall, Operations Bldg., Da Rfo-5, San Agustin, Pili, Camarines Sur. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. In Case Of A Tie Bid, The Bac Will Conduct The Guidelines On The Use Of Non-discretionary/non-discriminatory Selection Criteria As Tie-breaking Method Thru Draw Lots In Case Of Two Or More Bidders Have Been Post-qualified Determined As The Bidder Having The Lowest Calculated And Responsive Bidder (lcrb) (gppb Circular No. 06-2005). 11. The Da Rfo 5 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Bac Secretariat Office Department Of Agriculture, Regional Field Office No. 5 San Agustin, Pili, Camarines Sur 4418 Email Address: Bacrfo5@gmail.com For Downloading Of Bidding Documents: Https://bicol.da.gov.ph November 5, 2024, San Agustin, Pili, Camarines Sur Lorenzo L. Alvina Oic, Rtd For Research And Regulations Bac Chairperson

Details: Description Invitation To Bid For The Supply And Delivery Of Sixteen (16) Units Hand Tractor With Accessories 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The National Expenditure Program Fy 2025 Intends To Apply The Sum Of Three Million One Hundred Twenty Thousand Pesos (php3,120,000.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Sixteen (16) Units Hand Tractor With Accessories With Project Identification Number Da-rfo 1-2025-goods-012. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Early Procurement Activity (epa) Of The Above Procurement Project, In Accordance With The Provisions Under Appendix 31 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184 For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Particulars/descriptions Hand Tractor With Accessories I. Prime Mover : Rated Power: 7 Hp Engine: Diesel, Single Cylinder Cooling System: Water Cooled Ii. Design And Performance Actual Field Capacity For Single Passing : 0.125 Ha/hr Peak Transmission Efficiency : 85% Noise Level : 92db (a) Fuel Consumption During Plowing : Must Not Exceed 1.00 L/hr Iii. Classification Transmission System : 60-60 Iv. Attachments 1. Shall Be Compatible With The Size And Power Of Tractor 2. List Of Attachments Including The Following: A.) Cage Wheel And Brand New Pneumatic Tire B.) Two (2) Bottom Disc Plow (2 Pcs X 14" Diameter) 1 Disc Guide And Frame Assembly C.) Comb-tooth Harrow D.) One (1) Mt Capacity Heavy Duty Trailer Having A Brand New Pneumatic Tire 3. With Appropriate Tools Accessories As Specified In Paes V. List Of Applicable Paes/pns For Technical Requirements, The Following Shall Be Used : A.) Paes Walking-type Agricultural Tractor B.) Paes Hexagonal Axle And Hub For Walking-type Agricultural Type C.) Paes Agricultural Trailer Other Requirements: I. To Be Submitted During Bid Opening :  Valid Amtec Test Report  Valid Permit To Operate Issued By Bafe And Certificate Of Namdac Accreditation Issued By Pcaf  With Certificate Of Conformity Issued By Bafe For The Offered Engine  Certificate Of Company Owned/affiliated/authorized Service Center Within The Region And Service Center Must Have A Permit To Operate Issued By Bafe  Notarized Affidavit Of Undertaking After Sales Services That Supplier Must Render Within 72 Hours Upon Receipt Of Notice From The Recipients/procuring Entity  Certificate Of Availability Of Spare Parts Of The Brand/model Being Offered (to Be Issued By The Distributor/manufacturer/authorized Service Center) Within The Region  Notarized Certificate Of Stock Allocation To Be Submitted During Bid Opening Issued By The Distributor/dealer Specifying The Name Of Project To Da Rfo 1  Certificate To Conduct On Site-technical Briefing For Operators On Operation, Maintenance, And/or Repair Of The Supplied Goods By The Supplier Ii. To Be Submitted/verified During Post Qualification  Shall Present 100% Available Stocks Earmarked For Region 1 Iii. To Be Submitted/inspected/verified During Delivery / After Delivery  With Warranty Of One (1) Year For Parts Of Equipment And Two (2) Years Of Service To Be Reckoned From The Date Of Delivery  With Spray-painted (6"x 6") Indicating The Da Logo Labelled With "rfo 1 Rice Program" For The 12 Units And "rfo 1 Livestock Program" For The 4 Units Below The Logo To Be Placed At The Trailer And Reflectorized 2" X 2" Da Logo Sticker At The Top Of The Engine  With Metal Plate Indicating The Company Name And Active Office Landline / Mobile Numbers For Easy Access Of Farmer Clients  With Heavy Duty Polyethylene Tarpaulin (trapal) Per Site Enough To Cover The Items Delivered  Shall Be Subjected To Functionality Testing Upon Completion Of Delivery Of The Units Delivery Schedule: Within Twenty (20) Working Days Upon Receipt Of The Notice To Proceed Drop-off Points Province Quantity Delivery Sites Rice Livestock Pangasinan 2 Da-prec, Sual, Pangasinan 4 2 Da-prec, Sta. Barbara, Pangasinan La Union 2 Da-iliarc, Bacnotan, La Union Ilocos Sur 2 Da-isrec, San Juan, Ilocos Sur Ilocos Norte 2 2 Da-inrec, Batac City, Ilocos Norte Total 12 4 Delivery Of The Goods Is Required Within Twenty (20) Working Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 14 2024 To December 3, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 21 November 2024, 11:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 03 December 2024, 11:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 03 December 2024, 11:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. The Technical Specifications Of The Project Must Be Duly Signed/countersigned And Sealed By A Licensed Agricultural And Biosystems Engineer In Accordance With Republic Act 8559 Or Republic Act 10915; E. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. F. The Award Of Contract For Procurement Projects Undertaken Through Epa May Be Made Only Upon The Following Conditions And Shall Be In Accordance With Item 7 Of Appendix 31 Of The 2016 Revised Irr Of Ra 9184: F.1. Approval And Effectivity Of The Funding Sources, To Wit: (i) General Appropriations Act; (ii) Corporate Budget; (iii) Appropriations Ordinance; Or (iv) Loan Agreement In The Case Of Faps; Or F.2. The Reenactment Of The Previous Year’s Budget Which Constitutes The Current Year’s Authorized Budget, When Authorized By The Constitution, Law Or Rules. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ November 13, 2024 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-012

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00128 : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep) - Rural Health Units (rural Health Unit): Completion/ Equipping Of Super Health Centers - Sto. Niño Super Health Center 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱5,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00128: Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep) - Rural Health Units (rural Health Unit): Completion/ Equipping Of Super Health Centers - Sto. Niño Super Health Center. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep) - Rural Health Units (rural Health Unit): Completion/ Equipping Of Super Health Centers - Sto. Niño Super Health Center Contract Id No. : 24b00128 Location : Sto. Niño, Cagayan Brief Project Description : Expansion Of Shc At Grid G To H, Construction Of Patient's Waiting Area, Construction Of Powerhouse And Installation Of Water Tank, Construction Ambulance Bay, Improvement Of Ramp, Construction Of Catch Basin And Placenta Vault, Installation Of Sewer Lines, Storm Drainage, And Water Line System, Installation Of Electrical Works, Fire Alarm And Air Conditioning Unit, Construction Of Cabinets, Installation Of Leaded Materials At X-ray Room Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard/ Signboard • Occupational Safety And Health Program • Mobilization/ Demobilization Earthworks • Removal Of Structures And Obstruction • Excavation (structure) • Embankment (from Structure Excavation & Borrow) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Sanitary/plumbing Fixtures • Cold Water Lines • Ceiling (4.5mm Thick Ficem Board On Metal Frame & Aluminum Metal Cladding) • Wall • Carpentry And Joinery Works • Fire Rated Fire Exit Steel Door • Steel Doors And Frames • Aluminum Glass Windows, (sliding, Awning, Fixed) Type • Doors, Wood Panel • Roll-up Door (steel) • Special Performance Glass Or Processed Glass - (10mm Thk, Lead Glass) • Fabricated Metal Roofing Accessory, 0.60 Mm Thk, (flashing & Gutters) • Prepainted Metal Sheets (rib Type, Long Span,0.6mm Thk) • Waterproofing, Liquid • Glazed Tiles • Cement Floor Finish, Plain • Stamped Concrete • (cement Broom, Non -slip, Floor, Cement Plaster) Finish • Decorative Stones • Painting Works, (masonry/concrete, Steel) • Metal Deck Panel • Reflective Insulation • Chb Non-load Bearing (including Reinforcing Steel) (100 & 150) Mm • Louver Block • Metal Structure Accessories (turnbuckle, Sagrods, Cross Bracing, Steel Plates) • Structural Steel (tubular Steel, Purlins) • Stainless Steel Railing Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pole Mounted Power Transformer (oisc) With Complete Accessories, Single Or Three Phase, Pole Type Or Flatform • Lighting Fixtures • Rc Pedestal / Pole Mechanical Works • Ventilating System • Water Tank, Stainless • Fire Alarm System Approved Budget For The Contract (abc) : ₱5,970,000.00 Contract Duration : 85 Calendar Days Inclusive Of 6 Unworkable/rainy Days, 18 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13 - December 02, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 20, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before December 02, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On December 02, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 13-19, 2024 Conspicuous Place (procurement Bulletin Board): November 13-19, 2024

Details: Description 1 Land Ambulance (type 1) 1 Unit I. Vehicle Specifications And Requirements · Vehicle Type: Four-wheel Passenger Van With 4 Doors (2 At The Front For The Driver And Passenger, One Sliding Door Or Barn Door At The Right Side And Tailgate Or Barn Door At The Rear) · Wheelbase: At Least 2,500-2,800 Mm · Drive Type: Rear Wheel Drive · Engine Size/displacement: 2,500 To 3,000 Cc · Engine Type: 4 Cylinders, In-line Type, 16 Valves, Double Over Head Cam (dohc), Maximum 3,400 Rpm · Alternator And Battery The Capacity Of The Alternator And Battery Must Be Sufficient To Supply The Additional Load Demands Of All Medical Equipment. The Amperage Capacity Of The Alternator Must Be At Least 110 Amperes. · Fuel-injector System: Direct Injection · Emission Compliance: Euro 4 · Fuel Type: Diesel · Fuel Tank Capacity: At Least 65 Liters · Transmission: Manual With At Least Five (5) Speed + One (1) Reverse · Steering: Left Hand Drive With Power-steering System · Brakes: Ventilated Disk On The Front And Ventilated Disk Or Drum Type On The Rear. With Anti-lock Braking System. With Parking Brake · Front Suspensions: Mcpherson Strut Or Double Wishbone Or Torsion Bar With Stabilizer · Rear Suspensions: Rigid Axle With Leaf Spring And Double Acting Shock Absorbers · Wheels: At Least 15 Inch, Aluminum Mag Wheels Or Steel Wheels With Full Cover · Tires: Radial Type And At Least 195 Mm Tire Width Standard Vehicle Lamps: Head Lamps, Tail Lamps, Stop Lamps, Signal Lamps, License Plate Lamps, Fog Lamps And Step Lamps · Vehicle Body Color: White · Floor Material: Metal With Anti-static Floor Matting. Each Entry Point Of The Patient Compartment Must Be Fitted With A Diamond Tread Plate Flooring. · Standard Dashboard Instrumentations: Speedometer, Odometer, Fuel Gauge, Digital Clock, Warning Lamps For Low Oil Pressure, Cooling Water Level, Overheating, Low Battery Charge, Indicator Lamps For Parking Brake And Head Light High-beam, Engine Check, Door Open. · Dashboard And Rear-view Camera System: Resolution Of At Least 1920x1080@30fps, Angle Of View At Least 120 Degrees Diagonal, At Least 2 Inch Led Display, Minimum Storage Capacity Of 64gb, With Loop Recording, Automatic On/off And Night Vision Recording In Low Light. The Cameras Must Be Permanently Installed On The Dashboard Or Windshield And At The Rear Part Of Vehicle. Rear-view Camera Must Be Have Color-coded Parking Grid Features. The Power Supply Must Be From The Vehicle Battery. · Standard Driver’s Cabin Accessories: Am/fm Radio With Speakers, Usb Connector, Front Personal Lamp For Driver And Passenger, Rear View Mirror, Sun Visor And Assist Grips For The Driver And Passenger. · Vehicle Doors Glass Windows: Central Or Power Door Locking System. Hydraulic / Electric Windows For Driver And Front Passenger Sides. The Vehicle Glass Windows (except The Windshield) Must Be Installed With Medium Shade (35% Visible Light Transmitted) Glass Tint. · Windshield Wipers: With At Least Three (3) Speed Intermittent With Washer · Air Conditioning System: Dual Type; At The Driver’s Cabin And At The Patient Compartment With Independent Controls. · Seat Belts: 3 Point Emergency Locking Retractor (elr) Seatbelts For The Driver And Front Passenger. · Airbags: Supplemental Restraint System (srs) Airbags For The Driver And For The Front Passenger. · Driver And Passenger Side Mirrors: Standard Convex Type, Manual Or Power Adjustment · Vehicle Interior Trim: Moulded Trim. The Ceiling Must Be Provided With Insulation. · Stainless Steel Plate On The Rear Bumper To Protect The Bumper When The Ambulance Stretcher Is Being Loaded To The Ambulance. · Set Of Tools: Hydraulic Jack, Tire Wrench, Flat And Philips Screw Drivers, Set Of Pliers, Adjustable Wrench, Early Warning Device And Spare Wheel And Tire. Ii. Emergency Lights, Sirens And Public Address System · Emergency Lights: Roof Mounted Light Bar With Red And Green Flashing Led Lights. The Length Of The Light Bar Must Be The Same As The Width Of The Vehicle Roof. Electric Siren And Public Address System: Standard Ambulance Siren Tones (horn, Manual, Wail, Yelp, Phaser, Hilo/two Tone) And With At Least Two 100 Watts Amplifier And Siren Speakers. With Rotary Switch And Momentary Push-button Override Control. Public Address Override With Attached Microphone And Volume Control Knob · Red And Green Flashing Led Lights Mounted On The Upper Part Of The Rear Of The Ambulance · Red And Green Led Flashing Lights Mounted On The Front Grill Of The Ambulance Iii. Ambulance Body Marking · The Front Of The Ambulance Shall Be Marked With A Reflectorized And Capitalized Word “ambulance” Which Is Spelled Out In Reverse (mirror Image). The Height Of Each Letter Shall Be No Less Than 10 Centimeters And The Word Shall Be Seen At Least Six (6) Meters Away. · Each Side Of The Ambulance Body Shall Have The Capitalized Word “ambulance” Not Less Than 15 Cm In Height And The Letters Must Be In Red Color. · The Rear Side Of The Ambulance Body Shall Be Marked With A Reflectorized And Capitalized Word “ambulance” Not Less Than 15 Cm In Height And The Letters Must Be In Red Color. · The Prescribed Doh Logo With A Diameter Of Not Less Than 36 Cm Shall Be Placed On The Driver’s Door And On The Front Passenger Door. Iv. Patient Compartment · Compartment Interior Height: At Least 1600mm · Compartment Interior Width: At Least 1500mm · Partition Between The Driver And Patient Compartment: Air Tight Bulkhead Made Of Non-porous Material With A Transparent And Shatter-proof Sliding Window At Least 35 Cm X 30 Cm. · Storage Cabinet For Medicines, Instruments And Medical Equipment > Built-in Cabinet Made Of White Painted Aluminum Panels Or Other Lightweight, Equivalent Strength Material Such As Fiberglass, Composites And Fiberglass Reinforced Plastics. The Cabinet Must Be Mounted On The Upper Left Side Of The Patient Compartment And Must Be At Least 200 Cm But Must Not Be More Than 210 Cm In Length. The Cabinet Must Be Firmly Anchored (bolted Or Welded) To Tapping Plates Of The Body Structure. > The Cabinet Must Have Transparent And Shatter-proof Sliding Doors With Low Profile Handles. The Sliding Doors Must Be Easily Opened But Must Not Open During Transit. The Sliding Doors Must Be Fitted With Automatic Latch Or Friction Holding Device. > The Cabinet Must Have At Least 4 Shelves With At Least One Shelf Designed To Fit And Carry Heavy Medical Equipment Such As The Defibrillator And Nebulizer. The Shelves Must Have A Depth At Least 30 Cm But Must Not Be More Than 50 Cm. · Compartment For The Folding Stretcher And Scoop Stretcher: Installed Below The Storage Cabinet, Made Of White Painted Aluminum Panels Or Other Lightweight, Equivalent Strength Material Such As Fiberglass, Composites And Fiberglass Reinforced Plastics. The Compartment Must Be At Least 200 Cm But Must Not Be More Than 210 Cm In Length. The Cabinet Must Be Firmly Anchored (bolted Or Welded) To Tapping Plates Of The Body Structure. Bench For Medical Personnel: The Ambulance Must Be Fitted With 3-seater Bench Permanently Mounted On The Ambulance Floor; One On The Head Side Of The Patient And One On The Right Side Of The Patient Compartment. The Bench (seat And Backrest) Must Be Made Of Sturdy Aluminum Frame And Panels Coated With White Color Paint Or Other Lightweight, Equivalent Strength Material Such As Fiberglass Reinforced · Plastics Or Plastic Laminated. The Seat And Backrest Must Be Fitted With Mattress Made Of Polyurethane Foam Covered With A Washable Leatherette Material. The Construction Of The Bench Must Be In Such A Way That The Underneath Can Be Used As A Compartment. The Bench Must Have A 2 Point Seatbelt For Each Person. > Overhead Lighting: At Least 2 Led White Lights With Low Light Option > Grab Rail: Aluminum Or Stainless Steel Grab Rail At Least 120 Cm Long, 10 Cm Depth (maximum) Installed On The Ceiling Right Above The Patient/ambulance Stretcher. > 220v Ac Supply: The Patient Compartment Must Be Installed With An Electronic Inverter With A Capacity Of At Least 3kva And An Output Voltage Of 220v, 60 Hz. At Least Five (5) Convenience Outlets Must Be Installed At The Different Points On The Compartment To Supply Power To The Medical Equipment. > Intercom System: Intra-vehicle Intercom System Must Be Fitted To Serve As Voice Communication Between The Driver And Personnel In The Patient Compartment. V. Communication Equipment Two (2) Pieces Cellular Phones (one For The Ambulance And One For The Hospital/base). The Cellular Phones Must Be 4g Network Capable, With Internal Memory Of At Least 64gb And 4gb Ram Smartphones. The Phones Must Be Provided With Sim Cards And Battery Charger. Vi. Medical Equipment And Instruments · Ambulance Stretcher > Length: 180 – 185 Cm > Width: 48 – 55 Cm > Loading Height Should Match The Vehicle Floor Height > Loading Capacity: At Least 175 Kg > Materials: Stainless Steel, High Grade Aluminum Alloy > Head Part Rising Angle: At Least 75° Knee Part Rising Angle: At Least 15° > With Collapsible Side Rails And Quick Release Patient Restrain System > With Durable Folding Leg Mechanism > The Mattress Must Be Made Of High-density Polyester Fiber Foam With A Thickness Of At Least 5 Cm And Covered With Waterproof Vinyl Material. > Wheels: 200 - 210mm Diameter, Fixed Front With Locking Brakes And Auto-directional Rear And With 50-55 Cm Loading Carriage Wheels > Loading Rail Mounted In The Ambulance With Latching System > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment. · Automatic External Defibrillator (aed) > Compact, Lightweight, Easy To Use, Bi-phasic Defibrillator With Manual (with Easy 1-2-3 Operation) > Waveform: Rectilinear Biphasic > Defibrillator Charge Hold Time: Not More Than 30 Seconds > Patient Safety: All Patient Connections Are Electrically Isolated > Charge Time: Less Than 10 Seconds With New Battery Charge To 200j With A Fully-charged Battery > Battery Operated > Self-test: Configurable Automatic Self-test When Device Is Turned-on > Monthly Full-energy Test (200j) > Automatic Self-test Checks: > Battery Capacity > Electrode Connection > Electrocardiogram And Discharge Circuits > Microprocessor Hardware And Software > Cpr Circuitry And Cpr-d Sensor And Audio Circuitry > Cpr: Metronome Rate (variable 60 To 100 Cpm) > Defibrillator Advisory: Evaluates Electrode Connection And Patient Ecg To Determine If Defibrillation Is Required > Shockable Rhythms: > Ventricular Fibrillation With Average Amplitude Of > 100 Microvolts > Wide Complex Ventricular Tachycardia With Rated Greater Than 150 Bpm For Adults And 200 Bpm For Pediatrics > Patient Impedance Measurement Range: At Least 0 To 300 Ohms > Defibrillator: Protected Ecg Circuitry > Display Format: Optional Lcd With Moving Bar > Size: Approximately 2.6” X 1.3” > Ecg Viewing Window: At Least 2.6 Seconds > Optional Ecg Display Sweep Speed: Not More Than 25mm/sec; 1”/sec > Data Recording And Storage > At Least 50 Minutes Of Ecg And Cpr Data. > If Audio Recording Is Installed And Enabled, At Least 20 Minutes Of Audio Recording, Ecg And Cpr Data. > If Audio Recording Is Disabled, At Least 7 Hours Of Ecg And Cpr Data. > Pc Minimum Requirements For Configuration And Patient Data Recovery: Windows® 98, Windows® 2000, Windows® Nt, Windows® Xp, Ibm Compatible Pii With 16550 Uart (or Higher) Computer. 64mb Ram. Vga Monitor Or Better. Cd-rom Drive. Irda Port. 2mb Disk Space. > Available With Pediatric Pacing Cable And Pads Synchronized And Direct Defibrillation > Biphasic Energy Waveform, Adjustable Output, From Approximately 1 Up To 200 Joules > Load Compensation Circuit Allows Precise Delivery Of Selected Energy, Based On Patient’s Impedance > Energy Selection > Charge Controls - Push-button Controls On Front Panel > Charge Time - Less Than 10 Seconds With New Battery Charge To 200j With A Fully-charged Battery > Charge/ready Is Indicated Via Audiovisual > Defibrillator Energy - Approximately ±15% At 50ω > Accuracy - Approximately ±30% Over The Range Of 25 To 100 Ω > Defibrillator Waveform - 5ms Monophasic Pulse Display Shows Ecg, Heart Rate, Battery Status And Energy Output Pre-set > Monitor Display Size: Bright Back-lit Alphanumeric Lcd, Approximately 10 X 6 Cm > Frequency Response: Non-diagnostic > Heart Rate Meter: Three-digit Readout Displays Rates From 20 To 300 Bpm > Heart Rate Alarm: User Selectable Alarm Limits > Self-test Is Performed Each Time The Device Is Switched On > System Reports, With Audiovisual Alert: Status, Operation, Malfunctions And Low Battery > Internal Safety Discharge Upon 40seconds Non-delivery Of Accumulated Energy, Switch-off And Technical Failure > Sensitivity, Adjustable 5, 10 And 20mm/mv Pads: > Shelf Life: 5 Years > Conductive Gel: Polymer Hydrogel > Conductive Element: Tin > Packaging: Multilayer Foil Laminate Pouch > Impedance Class: Low > Cable Length: At Least 36 In (91 Cm) > Sternum: Length: At Least 6.1 In (15.5 Cm); Width: At Least 5.0 In (12.7 Cm); Length, Conductive Gel: At Least 3.5 In (8.9 Cm); Width, Conductive Gel: At Least 3.5 In (8.9 Cm); Area, Conductive Gel: At Least 12.3 Sq In (79.0 Sq Cm) > Apex: Length: At Least 6.1 In (15.5 Cm); Width: At Least 5.6 In (14.1 Cm); Length, Conductive Gel: At Least 3.5 In (8.9 Cm); Width, Conductive Gel: At Least 3.5 In (8.9 Cm); Area, Conductive Gel: At Least 12.3 Sq In (79.0 Sq Cm) > Complete Assembly: Folded Length: At Least 7.6 In (19.4 Cm); Folded Width: At Least 7.0 In (17.8 Cm); Folded Height: At Least 1.5 In (3.8 Cm) > Design Standards: Meets Applicable Requirements Of Ansi/aami/iso Df-39-1993. > Shock Resistant Housing Allows System To Function In Demanding Environment > Integrated Carry Handle Facilitates Transport > Splash-resistant Alphanumeric Function Keys Power Supply: > User Replaceable Battery Is Removable/replaceable By The Operator. (10 Type 123a Photo Flash Lithium Manganese Dioxide Batteries. > Battery Capacity: Typical New (20°c) = 5 Years (at Least 225 Shocks) Or At Least 13 Hours Continuous Monitoring. End Of Life Designated By Red X (typical Remaining = At Least 9 Shocks). Battery Compartment To Be Clearly Labeled, Splash-proof And Requiring Tool For Opening For Battery Replacement > Electrical Source Requirements: Battery Operated > Operating Temperature: 32° To 122°f; 0° To 50°c > Storage Temperature: -22° To 140°f; -30° To 60°c > Humidity: 10 To 95% Relative Humidity, Non-condensing > Vibration: Mil Std. 810f, Min. Helicopter Test > Shock: Iec 68-2-27; 100g > Altitude: 300 To 15,000 Ft.; -91m To 4573m > Particle And Water Ingress: Ip-55. > Defibrillator Pads (self- Adhesive, Disposable And Non-polarized) At Least Five (5) Pairs For Adult And At Least Five (5) Pairs For Pedia Ø Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment. · Nebulizer > Portable, Compressor-driven Nebulizer Pump, And A Four-pole Single Phase Motor Design In Metal Frame Construction > Easy To Operate With Sturdy Design For Use In Demanding Environment > Cup Capacity Minimum 3ml To Maximum 10ml > Nebulization, Approximately 0.1 To 0.2ml/minute > Residual Volume Maximum 2ml > Flow Delivery Range (under Load) 0.5 To Maximum 12 Liters/minute Or Greater > Median Mass Aerodynamic Diameter (mmad) Of Particles 0.5 To 4 Microns > Operating Temperature Range 5 To 50 ⁰c > Operating Relative Humidity Range Up To 65% > Compressor Requires No Maintenance And Delivers Oil-free Flow Diaphragm Type And Maximum Compressor Pressure Of 30 Psig Or Greater > Device, With Carry Handle, Is Provided With Accessory Storage Compartment > Power Supply, 220v/60hz > Power Consumption, Approximately 90w > System Configuration Accessories, Spares And Consumables: · System As Specified · Nebulizer Atomizer Body Piece (dome) · Reusable Mouth Piece, Pediatric Size (fitting Atomizer Body Piece) · Reusable Mouth Piece, Adult Size (fitting Atomizer Body Piece) · Air Tubing, Diameter Approximately 6/9mm (inner/outer), Length Approximately 1 Meter · Dosage Cup · Reusable Mask, Size Pediatric · Reusable Mask, Size Adult · Spare Inlet Filters · Spare Particle Filters · Set Of Spare Fuses · Portable Suction Machine > Electrical Suction Pump Supporting Medical Interventions Such As Resuscitation Or Minor Surgery > With Graduated Plastic Jar Auto-clavable, Capacity 1.2 Liters > Jar Is Covered And Fit With Overflow Valve And Antibacterial Filter > Suction Flow Maximum, Approximately 17l/minute > Vacuum Adjustable From 0 To Approximately - 600mmhg > Vacuum Control Button And On/off-switch > Sturdy Shock Resistant Casing, Easy To Carry And Easy Clean > Silent Operation Supplied With: > 2 X Set Of Silicone Tubes, Diameter 8/14mm (inner / Outer), Length Approximately 2.5m > 2 X Bi-conical Connectors Fitting The Silicone Tubes > 1 X Spare Jar Of 1l With Cover, Gasket And Overflow Valve > 1 X Set Of Spare Antibacterial Filters > 1 X Set Of Spare Fuses > 1 X Instructions For Assembly, Use And Maintenance, And List Of Accessories And Spare Parts With Product Reference Code In English Language > Consumables Should Be Available In The Local Market Power Supply > Power Input To Be 220-240vac (single Phase) / 60hz As Appropriate Fitted With Philippine Standard Plug > Voltage Corrector/stabilizer Of Appropriate Ratings Meeting Philippines Standard Specifications (input 160-260 V And Output 220-240 V And 60 Hz) > Power Consumption Approximately 50 Watts > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Examining Light (mounted On The Head Side Of The Patient) > Mobile Examination Light, Sturdy Construction. > On Heavy Base With 5 Swivel Castors, 2 With Brakes. Low Center Of Gravity For Optimal Stability And Reach > Single Lamp With Led Bulb: White Led Approximately 50,000 Hours Life > Field-of-view Diameter, Approximately 0.15 M At Working Distance > Homogeneous Illumination Across Entire Field-of-view, Approximately 20,000 Lux At 30.5 Cm To 50 Cm Working Distance > Color Temperature, Approximately 5500⁰k > Light Head Mounted On Spring Loaded Articulating Arm, Height Approximately 1.50 M > Touch Less On/off Switch And Electronic Control Box Incorporated In Base Or Spring Loaded Articulating Arm Power Supply: > -power Input To Be 220 Vac (single Phase) / 60hz As Appropriate Fitted With > Philippine Standard Plug > -power Consumption, Approximately 35 Watts Dimensions: > -weight: Total Mobile Stand: Approximately 5.78 Kg. > -height: Total Mobile Stand: Approximately 150.0 Cm (including Luminaire And Control Box) > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Aneroid Sphygmomanometer (mounted On The Ambulance Wall On The Head Side Of The Patient) > The Sphygmomanometer Is Composed Of Cloth Cuff Containing An Inflatable Bag (adult-25 Cm To 35 Cm) > Connected Via A Tube To A Flexible Bulb With Valve And Integrated Manometer Needle Gauge. > Latex And Mercury Free. > Bp Cuffs Are Anti-microbial Treated. > The Adult (25 Cm To 35 Cm) Cuff With Double Velcro Fastening, Enabling It To Be Adjusted To Fit Tightly > Around The Arm. > The Cuff Is Washable, Very Strong And Reinforced At Both Ends. > The Bag Is Inflated By Means Of The Flexible Bulb Connected Via A Tube (length Approximately 60 Cm, > Flexible And With Reliable Quick Connector) > The Quick Connector Can Easily Be Connected To All Types Of Inflation Bulbs > Inflation Bulb With Integrated Manometer Needle Gauge > Dial Graduated Up To 300 Mmhg Aneroid Instrument Mounted At A 20º Angle For Ease Of Viewing Clinical Sphygmomanometer For Desk Type, With Pressure Release Valve > Pressure Gauge To Allow Reading Of Pressure To 2mmhg Accuracy > Gauge Body To Allow Recalibration Of Readings, Yet In Normal Operation Be Sealed And Secure > Plastic Manometer With Chrome Plated Steel Bracket > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Folding Stretcher > Length: At Least 1900 Mm > Width: At Least 530 Mm > Loading Capacity: At Least 120 Kg > The Stretcher Must Have A Quick Release Patient Restrain System > Frame Material: High Grade Aluminum > Frame Must Be Made Of Sturdy Lightweight, Non-twisting Construction And With Rubber Handles > Stretcher Bed Material Must Be Washable > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Scoop Stretcher > Length: At Least 200 Cm > Adjustable Length > Width: At Least 42 Cm > Loading Capacity: At Least 150 Kg > The Stretcher Must Have At Least Three (3) Quick Release Patient Restrain System > Frame Material: High Grade Aluminum > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Heavy Duty Stethoscopes (dual) > Easy To Dismantle, Clean, And Disinfect. > Double Cup, Dual-use (adult And Pediatric Auscultation) In Stainless Steel Or Chromed Brass. > Adult Diaphragm: Approximately 43mm > Bell Diameter: Approximately 32mm > Y Tube Treated Rubber With Large Diameter: Approximately 10 Mm > Arms: Stainless Steel Or Chrome Brass Or Aerospace Alloy, With Spring Treated To Give Lasting Spring And Maximum Reliability And Comfort. > Removable Plastic/rubber Ear-pieces. > Supplied With Spare Diaphragms Or Diaphragm Membrane, Y Tube And A Pair Of Ear-pieces > Environmental Factors: > The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 - 50 ⁰c And Relative Humidity Of 15-90%. > The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 ⁰c And Relative Humidity Of Less Than 70%. > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Container Box · Non-contact Thermometer > Measuring Scale: Degree Celsius > Lcd Or Led Display With At Least Three (3) Digit Measurement Display > Components Must Have No Glass And Mercury Materials > Measurement Range: 34°c To 42°c Or Wider Range. > Beep Sound Upon Measurement > Switch Off Automatically When Not In Use. > Battery Operated. > With Low Battery Indicator > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Blood-glucose Meter With Strip > Hand Held Meter > No Routine Maintenance Reading Range/linearity From 20 To 600 Mg/dl > Maximum Reading Time Of Less Than 10 Seconds > Use Of Electrochemical Technology > Use A Minimum Blood Sample Of Less Than 1.5µl > Lcd Display > Measuring Unit In Mg/dl. > Wide Operating Temperature > A Minimum Memory Of 50 Test Results > Should Have Easy Code Entry Technique > Battery Should Be Replaceable Without Using Any Tools > Should Have Facility To Ensure Accuracy Of Measurements. > Should Be Supplied With Three Types Of Control Solutions Of Each At Least 3 Ml > Item Should Have Data Transfer Facility Through Usb Device Or Blue Tooth > The Unit Should Be Cleanable And Sterilizable With Alcohol · Glucose Strips > Should Be Able To Use Capillary Blood Samples. > Should Have A Minimum 4 Months Shelf Life After Opening The Strip Vial. > All Strips Should Have At Least One Year Expiry Date From The Date Of Supply. > Minimum Of 10 Strips, 10 Lancets, And 1 Lancing Device Should Be Supplied Along With The Equipment. > Strips Should Be Available In The Local Market. Power Requirements > Shall Be Battery Operated 3-volt Lithium Ion Cell Battery Or 2 X (aaa) Alkaline Battery. Battery Should Be Supplied With Item And Should Last At Least 1000 Tests. > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Manual Resuscitators For Adult > Resuscitator To Ventilate Adult (body Weight Over 30kg) > Resuscitator Operated By Hand > Ventilation With Ambient Air > Resuscitator Shall Be Easy, To Disassemble And Reassemble, To Clean And Disinfect, And Be Autoclavable. > All Parts Must Be Manufactured From High-strength, Long-life Materials And Require No Special Maintenance Or Storage Conditions. Resuscitator Shall Be Supplied As A Complete Set With: > Compressible Self-refilling Ventilation Bag, Capacity: 1500-2000 Ml > Non-rebreathing Patient Valve With Or Without Pressure Limiting Valve, Patient Connector Outside/inside Diameter (od/id): 22/15 Mm > Inlet Valve With Nipple For 02 Tubing > Oxygen Reservoir Bag Complete, Capacity: 2000-2600 Ml > Masks, Transparent, In 3 Sizes: > 1 Mask, Face Shape Type, Size Adult Small/teenager > 1 Mask, Face Shape Type, Size Adult Medium > 1 Mask, Face Shape Type, Size Adult Large Resuscitator Supplied In A Box As A Complete Set, With Clear Instructions / Diagrams For Use Covering The Technical Performances, The Use And The Maintenance Of The Resuscitator And Assembly In English Language > Materials: Latex-free > Compressible Self-refilling Ventilation Bag: Silicone Rubber, > Non-rebreathing Patient Valve With Pressure Limiting Valve: Polycarbonate/polysulfone/silicone, > Inlet Valve With Nipple For O2 Tubing: Polycarbonate/polysulfone/silicone, > Oxygen Reservoir Bag: Plastic > Masks: Transparent Silicone Rubber. Standards, Safety And Training: > Should Be Fda, Ce, And Ul Approved Product > Conforming To International Standards: Iso, Ce Certification, Fda > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment Or Container · Manual Resuscitators For Neonate/infant > Resuscitator To Ventilate Preterm, Newborn, Small Infant (body Weight 0-7 Kg) > Resuscitator Operated By Hand > Ventilation With Ambient Air > Resuscitator Shall Be Easy, To Disassemble And Reassemble, To Clean And Disinfect, And Be Autoclavable. > All Parts Must Be Manufactured From High-strength, Long-life Materials And Require No Special Maintenance Or Storage Conditions. Resuscitator Shall Be Supplied As A Complete Set With: > Compressible Self-refilling Ventilation Bag, Capacity: 200-250ml > Non-rebreathing Patient Valve With Pressure Limiting Valve, 40± 5 Cmh2o, Patient Connector Outside/inside Diameter (od/id): 22/15mm, > Inlet Valve With Nipple For 02 Tubing > Masks, Transparent, In 3 Sizes: > 1 Mask, One Piece, Round Shape Type, Size Preterm > 1 Mask, One Piece, Round Shape Type, Size Newborn > 1 Mask, One Piece, Round Shape Type, Size Infant Small > Resuscitator Supplied In A Box As A Complete Set, With Clear Instructions / Diagrams For Use Covering The Technical Performances, The Use And The Maintenance Of The Resuscitator And Assembly In English Language > Materials: Latex-free > Compressible Self-refilling Ventilation Bag: Silicone Rubber > Non-rebreathing Patient Valve With Pressure Limiting Valve: Polycarbonate/polysulfone/silicone > Inlet Valve With Nipple For O2 Tubing: Polycarbonate/polysulfone/silicone > Masks: Transparent Silicone Rubber Standards, Safety And Training: > Should Be Fda, Ce, And Ul Approved Product > Conforming To International Standards: Iso, Ce Certification, Fda Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment Or Container Manual Resuscitators For Pedia (child) > Resuscitator To Ventilate Child (body Weight 7-30 Kg) > Resuscitator Operated By Hand > Ventilation With Ambient Air > Resuscitator Shall Be Easy, To Disassemble And Reassemble, To Clean And Disinfect, And Be Autoclavable. > All Parts Must Be Manufactured From High-strength, Long-life Materials And Require No Special Maintenance Or Storage Conditions. > Compressible Self-refilling Ventilation Bag, Capacity: 500-700 Ml > Non-rebreathing Patient Valve With Pressure Limiting Valve, 40 ±5 Cmh2o, Patient Connector Outside/inside Diameter (od/id): 22/15 Mm > Inlet Valve With Nipple For 02 Tubing > Oxygen Reservoir Bag Complete, Capacity: 2000-2600 Ml > Masks, Transparent, In 3 Sizes: · 1 Mask, Round Shape Type, Size Child Small · 1 Mask, Round Shape Type, Size Child Medium · 1 Mask, Face Shape Type, Size Child Large > Resuscitator Supplied In A Box As A Complete Set, With Clear Instructions / Diagrams For Use Covering The Technical Performances, The Use And The Maintenance Of The Resuscitator And Assembly In English Language > Materials: Latex-free > Compressible Self-refilling Ventilation Bag: Silicone Rubber > Non-rebreathing Patient Valve With Pressure Limiting Valve: Polycarbonate/polysulfone/silicone, > Inlet Valve With Nipple For O2 Tubing: Polycarbonate/polysulfone/silicone, > Oxygen Reservoir Bag: Plastic > Masks: Transparent Silicone Rubber · Oxygen Cylinder With Oxygen Therapy Set > At Least 20 Pounds Capacity > Must Be Color Green > Oxygen Therapy Set · Gauge Reading: 1,800 Psi Or Higher · Flowmeter: 0 To 15 Li/min · Humidifier Bottle: Hard Plastic, Capacity: 200ml To 300ml · Accessories: Mouth Piece, Tubing, Open Wrench For Installing The Therapy Set To The Cylinder · The Cylinder Must Be Placed In A Holder Mounted On The Head Side Of The Patient · Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Laryngoscopes Set > Constituted Of A Large Hollow, Cylindrical, Slightly Ribbed Handle And A Set Tongue Depressor In Fiber Optic. > The Handle Is Made Of Fiber Optic Led Light > The Handle Can Be Opened At One End To Insert Two Type C Alkaline Battery > The Other End Has A Stud Contact Which Fits The Various Sizes And Types Of Depressors > The Set Of Autoclavable Depressors Includes: A. 4 Curved Depressors, Macintosh Type: No. 1: Approximately 66 Mm Length No. 2: Approximately 85 Mm Length No. 3: Approximately 105 Mm Length No. 4: Approximately 140 Mm Length B. 5 Straight Depressors, Miller Type: No. 0: Approximately 56 Mm No. 1: Approximately 82 Mm No. 2: Approximately 135 Mm No. 3: Approximately 175 Mm No. 4: Approximately 185 Mm > Contained In Suitable Protective Plastic Box Or Vinyl Sturdy Padding Case > Battery Compartment (if Reusable) To Be Sealed Against Liquid Ingress, Yet Easily Opened > On/off Switch To Be Robust And Easy To Use > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Container Box · Immobilization Devices A) Cervical Collars I. Rigid For Children Ages 2 Years Or Older Ii. Child And Adult Sizes (small, Medium, Large) B) Head Immobilization Device (not Sand Bags): Firm Padding Or Commercial Device C) Lower Extremity (femur) Traction Devices I. Limb-support Slings Ii. Padded Ankle Hitch Iii. Padded Pelvic Support Iv. Traction Strap (adult & Child Sizes) D) Upper And Lower Extremity Immobilization Devices I. Joint-above And Joint-below Fracture (sizes Appropriate For Adults And Children) Ii. Rigid- Support Constructed With Appropriate Material (cardboard, Metal, Pneumatic, Vacuum, Wood Or Plastic) – Various Sizes E) At Least 2 Pieces - Resistant Straps Or Cravats · Delivery Set All Instruments Must Be Surgical Grade Stainless Steel Material With ± 0.4 Inch Measurement Tolerance > 1 Pc. Sponge Holding Forceps, Rampley 9.5" > 1 Pc. Kidney Dish 10" > 1 Pc. Bowl 200mm > 1 Pc. Umbilical Scissors, American, Straight 4.5" > 1 Pc. Needle Holder Mayo Hegar Straight 6.5" > 1 Pc. Episiotomy Scissors 14.5 Cm > 1 Pc. Cusco Vaginal Speculum Medium > 1 Pc. Hartmann Mosquito Artery Forceps Straight 120mm > 1 Pc. Metal Catheter > 1 Pc. Uterine Curette > 1 Pc. Treves Dissecting Forceps, Plain, 200mm > 1 Pc. Spencerwells Artery Forceps Curved 6" > 1 Pc. Kocher Artery Forceps, Toothed Straight 6" Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Instrument Container Box. · Patient Monitor > Atleast 10 Inches Color Tft Led Display > 800 X 600 Pixels Resolution > Maximum Display Of 11 Channels; Auto Channel Height Adjustment Function > Lightweight & Ergonomic Design > Parameters: 3/5 Lead Ecg, Hr, Resp, Nbp, Spo2, Pr, Temp > With St Segment Analysis And 21 Calls Of Arrhythmia > Fast Spo2 Technology With Anti-motion And Low Perfusion Performance > Navigation Wheel For Information Input And Screen Navigation > Backlit Function Buttons For Quick Access To Key Functions > Bed-to-bed Overview Function For Up To 32 Monitors Without Central Monitoring System > Bi-directional Communication Via Lan Networking To A Central Monitoring System > Standard Hl7 Output > Fan-less Design To Reduce Dust Deposits > Applications From Neonate To Adult > With Oxycrg & Minitrend > With Big Number Screen, Dynamic Trend Screen, & Ocrg Screen > 4 User-defined Layout > Timing Clock Configurable From 5-30mins > 1,600 Sets Nbp Table > 1,200-hour Trend Graph Of All Parameters (with Data Manager Function) > 120-minute Full Disclosure Ecg 1 Waveform Review (with Data Manager Function) > 200 Sets Alarm Events & 200 Sets Arrhythmia Events > With Drug Calculation > With Hr Variation & Dynamic Blood Pressure Analysis > Rechargeable Lithium Ion Battery With 2.5 Hrs Of Operation > With Built-in 3-channel Recorder > Standard External Interface Available: Ecg Analog Output, Vga Output, Nurse Call, Lan, Usb > Patient Data Export Using A Usb Data Manager > Net Weight: Approximately 4.2kg Vii. Other Equipment And Accessories Note: The Items Below (except The Iv Holder) Must Be Marked With Non-removable Doh Logo And The Words “for Ambulances Use Only” On The Visible Part Of The Equipment. > Fire Extinguisher (rating 2a10bc), Five (5) Pounds, With Holder Mounted On The Ambulance Floor. > Heavy Duty Led Flashlight With At Least 1,000 Lumens Of Brightness With Extra Batteries. Iv Holder (mounted On The Ambulance Wall Head Side Of The Patient). > Digital Clock With At Least 4 Inch Display Mounted On The Ambulance Wall. > Air Purifier With Multi-stage Air Filters (pre-filter, Hepa, Carbon) And With Uv Light. > Garbage Container At Least 3 Liter Capacity And Made Of Fiberglass Reinforced Plastic Or Acrylonitrile Butadiene Styrene (abs) Plastic Material And With Lid Cover. The Container Must Be Properly Labelled And Must Be Mounted On The Ambulance Floor. > Sharps Container With Sliding Lid And At Least 1 Liter Capacity, Made Of Fiberglass Reinforced Plastic Or Abs Plastic Material. The Container Must Be Mounted On The Ambulance Wall. I. Other Requirments To Be Submitted During The Bid Opening 1. Product Brochure(s) Or Technical Data Sheet(s) In Hard And Soft Copies Showing The Technical Specifications Of The Following In English Language: A) Ambulance Vehicle B) Emergency Lights, Siren And Public Address C) Ambulance Stretcher D) Automatic External Defibrillator E) Nebulizer F) Examining Light G) Aneroid Sphygmomanometer H) Folding Stretcher I) Scoop Stretcher J) Heavy Duty Stethoscopes K) Non-contact Thermometer L) Blood Glucose Meter M) Manual Resuscitators N) Suction Machine O) Oxygen Therapy Set P) Laryngoscopes Set Q) Delivery Set R) Air Purifier S) Patient Monitor · Valid Marketing Authorization, Registration Approval Or Free Sale Certificate For The Automatic External Defibrillator Issued By The Health Authority In The Country Of Origin. · Valid Certificate Of Distributorship (as First Tier Distributor) Issued By The Foreign Manufacturers Or Local Distributors Of The Medical Equipment And Instruments Authorizing The Bidder To Sell/distribute Their Products. · Notarized Certificate From The Bidder: That The Brands Of The Medical Equipment And Instruments Have Been In The Local And/or International Market For At Least Ten (10) Years. > That Medical Equipment And Instruments Are Brand New, Unused, Not Discontinued Models And Were Not Subjected To Any Product Recall. · Bidder’s Valid And Current License To Operate (lto) As A Medical Device Distributor Issued By The Philippine Food And Drug Administration. · Valid And Current Certification Of Product Registration (cpr) For The Thermometer, Lancets In The Blood-glucose Meter And Manual Resuscitator Issued By The Philippine Food And Drug Administration (pfda) · Notarized Certificate From The Manufacturer Or Local Dealer Of The Ambulance/vehicle: > That The Manufacturer Has Been Manufacturing Vehicles With Diesel Engines For The Past Twenty Five (25) Years. > That The Ambulance/vehicle Is Brand New, Unused, Not A Discontinued Model And Was Not Subjected To Any Product Recall. · Proofs (such As Sales Invoice) That The Brand Of The Vehicle Has Already Been Sold In The Country As An Ambulance. Requirement/s If Declared The Lowest/single Calculated Bid · Site Inspection To The Bidder’s Facility To Verify/validate The Capability And Capacity Of The Bidder To Fabricate The Ambulances As Well As Sample Unit With Complete Medical Accessories. The Inspection Shall Be Conducted By The Procuring Entity Technical Working Group. This Requirement Is Not Applicable If The Facility Is Located Outside The Philippines. · Motor Vehicle Service Center Should Be Located In Each Province Namely Cebu, Bohol, & Negros Oriental In Order For The Recipient Facility To Have Easy Access During Preventive Maintenance. Requirements If Awarded The Contract · The Supplier Shall Provide Orientation/training On The Use And Maintenance Of The Ambulance, Medical Equipment And Instruments On A Schedule To Be Agreed Upon By Procuring Entity And The Winning Bidder. · The Supplier Shall Submit/provide The Following To The End User: > Operator’s Manual In English Language For The Ambulance, Medical Equipment And Instruments. > Certification Of Inclusive Preventive Maintenance Services From 10 Kilometer Up To 40 Kilometer With An Interval Of 10,000kms Or 6 Months Whichever Comes First At Any Manufacturer’s Service Center Branches In Central Visayas. > Warranty Certificate For Three (3) Years On Parts And Services For The Ambulance. The Manufacturer/dealer Shall Either Repair Or Replace Any Item Or Part In The Ambulance That Is Found To Be Defective In Material Or In Workmanship Under Normal Use. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. The Warranty Certificate Shall Include The Following: · That The Warranty For The Vehicle Shall Not Be Affected In Case A Change Of Dealer Occurs. That If The Ambulance Is Unable To Return To The Service Center During The Warranty Period, The Manufacturer/dealer Shall Provide Mechanics And/or Technicians That Can Perform On-site Service And Maintenance, Provided That The End User Will Shoulder The Travel Expenses. · Warranty Certificate For Two (2) Years On Parts And Services For Medical Equipment, Instruments And Ambulance Accessories. The Supplier Shall Either Repair Or Replace Any Item Or Part In The Said Equipment That Is Found To Be Defective In Material Or In Workmanship Under Normal Use. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. The Warranty Certificate Shall Include The Following: > The Bidder Shall Conduct The Necessary Corrective Maintenance Within Fifteen (15) Calendar Days Upon Notification Of Equipment Breakdown From The End-user. > The Bidder Shall Have The Primary Responsibility And Accountability To Ensure That In Case Of Defects, The Vehicle, Equipment, Instruments And/or Peripherals Are Appropriately Repaired Or Replaced And Shall Be In Good Working Condition Thereafter. · At Least Three (3) Years Validity Of The Vehicle From Land Transportation Office Region 7 (lto Ro7) Registration With Red Plate. This Is To Allow Easy Accessibility By The Recipient Lgus For The Processing And Transfer Of The Documents. · Third Party Liability (tpl) Vehicle Insurance For One (1) Year And Comprehensive Gsis Vehicle Insurance For One (1) Year. · Delivery > Delivery Schedule: Within 90 Calendar Days Upon The Receipt Of Purchase Order > Upon Delivery, Each Ambulance Shall Undergo Preliminary Physical Inspection By The Inspection Team Of The Procuring Entity To Ascertain The Physical Condition And Acceptability Of The Units. All Medical Equipment, Instruments, Ambulance Accessories And Peripherals Must Be Functioning And Must Have No Physical Damage. > All Land Ambulance Units Shall Be Filled Up With Crude Diesel At Full Tank Capacity Upon Delivery. · Terms And Conditions: > Supplier Must Not Have Any Pending Or Incomplete Delivery, Installation, Training And Demonstration Beyond The Delivery Period Indicated In The Purchase Order With Any Existing Doh-cvchd Projects. > The Supplier Must Coordinate With The Equipment Unit Head And Supply Officer On The Schedule Of The Delivery, Completion Of Training & Demonstration In Order To Facilitate Inspection Of The Doh Cvchd Inspection Team. Payment Will Only Be Made After Delivery And Installation. > Demonstration, Training & Completion Of The Accessories And Equipment Should Be Within 5 Days After The Delivery Of The Equipment. O *recipient Facility Shall Sign The Ptr Only If The Supplier Fully Complied With The Above The Supplier Shall Conduct Comprehensive Demonstration & Training For Staff And Support Services Till Familiarity With The Unit. A Copy Of The Certificate Of Training And Documentation During The Training Session Shall Be Provided To The End Users And Supply Office.

Details: Description Request For Quotation Infrastructure (negotiated Procurement-small Value Procurement) The Provincial Government Of Camarines Norte (pgcn), Through Its Bids And Awards Committee (bac), Hereby Invites All Interested Contractors, To Quote Their Lowest Price On The Project Stated Below, Subject To The Terms Of Reference (tor), In Accordance With Section 53.9 And Annex H Of The 2016 Revised Implementing Rules And Regulation Of Ra 1984. Name Of Project And Location: Repair/rehabilitation Of School Building Sotero Mago Elementary School, Capalonga, Camarines Norte Contract Reference Number: Rfq-infra-2024-018 Approved Budget For The Contract: P 999,380.30 Terms Of Reference I. The Following Documentary Requirements Shall Be Submitted Together With The Price Quotation (sealed In An Envelope): 1. Valid Philgeps Registration Certificate-platinum (attach Annex “a” Stating That You Have A Current And Updated File Of The Following Class “a” Eligibility Documents Under Section 23.1 (a) And 24.1): A. Sec/dti/cda Registration Certificate B. Mayor’s Business Permit C. Tax Clearance D. Philippine Contractors Accreditation Board (pcab) License And Registration E. Audited Financial Statements 2. Bir Registration Certificate 3. Income Tax Return (itr)- (for Abc’s Above 500k) 4. Omnibus Sworn Statement-(for Abc’s Above 50k) 5. Affidavit Of Site Inspection 6. Name/credentials Of Proposed Key Personnel (project Manager, Project Engineer, Materials Engineer, Construction Foreman And Safety Officer) 7. List Of Completed Similar Project Within The Last Three (3) Years With Attached Supporting Documents 8. List Of Contractor’s Equipment (one (1) Unit Welding Machine, One (1) Unit Hoisting Machine, 4x4 Pick-up Type Service Vehicle) (the Contractor’s Major Equipment Units Which Are Owned, Leased And/or Under Purchase Agreements Must Be Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor During The Duration Of The Project, As The Case May Be Which Must Meet The Minimum Requirements) 9. Quotations Not Accompanied By The Documents Stated Shall Be Automatically Disqualified Ii. Additional Requirements To Be Submitted Within Five (5) Days From Opening Of Sealed Quotations: 1. Construction Schedule And S-curve 2. Pert/cpm 3. Manpower Schedule 4. Equipment Utilization Schedule 5. Construction Method In Narrative Form 6. Construction Safety & Health Programs Approved By Dole* *copy Of The Cshp Received By Dole May Be Initially Submitted Together With The Noa However, The Dole Approved Cshp Must Be Immediately Submitted Upon Approval. Ii. Implementation Schedule: The Project Should Be Completed Within Sixty (60) Calendar Days Starting From Receipt Of Notice To Proceed (ntp). Iii. General Conditions: 1. All Quotations Must Be Legibly Written. 2. Price Offers Exceeding The Approved Budget For The Contract (abc) Shall Be Automatically Disqualified. 3. Price Quotations Shall Be Duly Supported By The Bidder’s Detailed Computation Of Estimated Costs For Each Item. 4. Total Bid Offers Shall Be Inclusive Of Taxes Such As But Not Limited To Vat, Income Tax, Local Tax (such As Sand & Gravel Tax, Contractor’s Tax) And Other Levies. 5. Price Quotation Will Be Valid For Sixty (60) Calendar Days From Date Of Opening Of Sealed Quotations. 6. The Price Offered Shall Not Be Subject To Any Increase For Whatever Reason Including In Cases Of Devaluation/inflation During The Entire Duration Of The Contract. Iv. Awards Of Contract All Submitted Quotations Will Be Evaluated And Calculated Including Its Eligibility Requirements. The Bac Shall Recommend To The Head Of The Procuring Entity The Award Of Contract To The Contractor/supplier With The Single Or Lowest Calculated Responsive Quotation, Setting Forth The Names Of Those Who Responded To The Request For Quotations (rfq) With An Abstract Of Quotations. V. Performance Of Security 1. To Guarantee The Faithful Performance Of The Successful Bidder Of Its Obligation Under The Contract, It Shall Post A Performance Security Within Ten (10) Calendar Days From The Receipt Of Notice Of Award (noa), Which Shall Answer For Any Liability Arising From The Performance Of The Contract. 2. The Performance Security Shall Be Denominated In Philippine Pesos And Posted In Favor Of The Procuring Entity In An Amount Not Less Than The Percentage Of The Total Contract Price In Accordance With The Following Schedule: Form Of Performance Security Amount Of Performance Security (not Less Than The Percentage Of The Total Contract Price) (a) Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank. (the Cashier’s/manager’s Check May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) Ten Percent (10%) (b) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank. (the Bank Draft/guarantee, Or Irrevocable Letter Of Credit May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) (c) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Thirty Percent (30%) 3. The Performance Security Posted In Favor Of The Procuring Entity Shall Be Forfeited In The Event It Is Established That The Contractor Is In Default In Any Of Its Obligations Under The Contract. Vi. Contract Signing 1. The Provincial Government Camarines Norte Shall Enter Into Contract With The Winning Bidder Upon Posting Of The Required Performance Security And Insurance Coverage. The Following Documents Shall Form Part Of The Contract: A. Contract Agreement; B. Terms Of Reference; C. Price Quotation Form Including The Detailed Cost Computation Of Estimated Costs; And D. Notice Of Award Vii. Notice To Proceed (ntp) The Provincial Government Of Camarines Norte Shall Issue The Ntp To The Successful Bidder Upon Approval Of The Contract By The Head Of The Procuring Entity. Viii. Contract Implementation: The Rules And Regulations And Other Aspect Of Contract Implementation Shall Be In Accordance With Annex E Of The 2016 Revised Irr Of Ra 984, Such As, But Not Limited To The Following: A. Variation Order-change Order/extra Work Order B. Additional/extra Work Costing C. Conditions Under Which The Contractor Is Start To Work Under Variation Orders And Receive Payments D. Advance Payment E. Progress Payments F. Retention Money G. Contract Completion H. Negative Slippage I. Liquidated Damages J. Suspension Of Work K. Extension Of Contact Time L. Accreditation Of Testing Laboratories M. Other Rules And Guidelines Ix. Warrant Security: 1. To Guarantee That The Contractor Shall Perform His Responsibilities As Prescribed In Section 62.2.3.1(a) Of This Irr, It Shall Be Required To Post A Warranty Security In Accordance With The Following Schedule: Form Of Performance Security Amount Of Performance Security (not Less Than The Percentage Of The Total Contract Price) (a) Cash Or Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That The Letter Of Credit Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank. (the Letter Of Credit May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) Five Percent (5%) (b) Bank Guarantee Confirmed By A Universal Or Commercial Bank. (the Bank Draft/guarantee May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) Ten Percent (10%) (c) Surely Bond Callable Upon Demand Issued By Gsis Or A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Thirty Percent (30%) 2. The Warranty Security Shall Be Denominated In Philippine Pesos, Remain Effective For One (1) Year From The Date Of Issuance Of The Certificate Of Final Acceptance By The Pgcn. Funded Through The 20% Development Fund With Sp Res. No.519-2024/ao No.16-2024-supplemental Budget No. 2. Interested Contractors/suppliers May Obtain Further Information From The Provincial Government Of Camarines Norte And Inspect The Terms Of Reference At The Address Given Below From 8:00 A.m. To 5:00 P.m., Monday To Friday, Except Holidays. A Complete Set Of Request For Quotation Documents May Be Acquired By Interested Contractors/suppliers On November 22, 2024 At The Provincial Capitol Building, Daet, Camarines Norte And From The Website Of The Philippine Government Electronic Procurement System (philgeps) Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p1000.00). The Procuring Entry Shall Allow The Contractor/suppliers To Present Its Proof Of Payment For The Fees In Person. All Quotations Together With The Required Documents Must Be Placed In A Sealed Envelope Marked Repair/rehabilitation Of School Building, Sotero Mago Elementary School, Capalonga, Camarines Norte Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 3, 2024 At 1:30p.m. Late Bids Shall Not Be Accepted. Opening Of Sealed Quotations Shall Be On December 3, 2024 At 2:00p.m. Onwards At The New Bac Conference Office, At The Back Of Agro-sports Center, J. Lukban St., Daet, Camarines Norte. Bids Will Be Opened In The Presence Of The Contractors/suppliers Representatives Who Choose To Attend The Activity. For Further Inquiries, Please Coordinate With The Bac Secretariat The Address Below: Engr. Almirante A. Abad Head, Bac Secretariat Bac Office, Camarines Norte Agro Sports Center J. Lukban St., Daet, Camarines Norte The Provincial Government Of Camarines Norte Reserves The Right To Reject Any Or All Price Quotations, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Price Quotations, At Any Time Prior To Contract Award, Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Pgcn Assumes No Responsibility Whatsoever To Compensate And Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Price Quotations. Atty. Archimedes O. Yanto Provincial Legal Officer/bac Chairperson Price Quotation To: Atty. Archimedes O. Yanto Provincial Legal Officer/bac Chairperson Sir: After Having Fully Read And Accepted The Terms Of Reference For The Repair/rehabilitation Of School Building, Sotero Mago Elementary School, Capalonga, Camarines Norte, I Hereby Submit, In A Sealed Envelope, My Price Quotation, Along With The Required Documents And Detailed Computation Of Estimated Costs. Item No. Item Description/ Specifications/scope Of Work Quantity Unit Unit Cost Total Cost Name Of Project: Repair/rehabilitation Of School Building Location: Sotero Mago Elementary School, Capalonga, Camarines Norte Approve Budget For The Contract (abc): P 999,380.30 I Removal Of Existing Roof/trusses/ceiling 1.00 Ls Ii Roof Framing 1.00 Ls Iii Roof Tinning 112.01 Sq.m. Iv Ceiling Works 93.14 Sq.m. V Painting Works (interior Walls) 98.43 Sq.m. Vi Electrical Works 1.00 Ls Spl-1 Provision Of Field Office For The Engineer (rental Basis) 2.00 Mos. Spl-2 Provision Of 4x4 Pick-up Type Service Vehicle For The Engineer On Bare Rental Basis 10.00 Days Spl-3 Project Billboard/signboard 1.00 Each Spl-4 Occupational Safety & Health Program 1.00 Ls T O T A L In Words: If Our Bid Is Accepted, We Undertake To Provide The Required Performance Security. We Agree To Abide By This Bid For The Bid Validity Period Of One Hundred Twenty (120) Days And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award (noa) Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Bid You May Receive. _____________________________________ Name Of Firm/offeror _____________________________________ Printed Name And Signature Of Representative _____________________________________ Address _____________________________________ Telephone No./cellphone No./e-mail Address _____________________________________ Date

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-12-19 (108) Supply And Delivery Of Temporary Facility – Modular Type (fabrication And Installation) - Rebid Abc: Php 6,500,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through Fy 2024 Internally Generated Fund (igf) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Six Million Five Hundred Thousand Pesos Only ( Php 6,500,000.00) As To Payment Under The Contract For Supply And Delivery Of Temporary Facility – Modular Type (fabrication And Installation) - Rebid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. This Project Shall Be Completed Within 90 Calendar Days From Receipt Of The Notice To Proceed And To Wit: Line Item Code Description Qty Unit Of Measure Unit Cost Total Cost 1 Temporary Facility – Modular Type (fabrication And Installation) 1 Lot 6,500,000.00 6,500,000.00 Technical Specifications Low Cost Fabrication Container Van 22 Unit 20ft Low Cost Container House (5.95m L X 3m W X 2.8m H) With Basic Channel Steel Frames, 2 Sets Aluminum Frame Sliding Window With Grills, 1 Set Basic Steel Door, ¾ Mgo Boards, 2” Styrofoam Walls And Roof Insulation W/ Powder Coated Double Sided G.i Sheets 0.4mm Thk Of Wall Panel, 2 Lighting Fixtures, 2 Electrical Outlets (two Gang), 1 Main Breaker. 32 Pcs 100 Mm⌀ G.i Pipe Column W/ Concrete Pedestal 4 Unit Ablution Type Cr (low Cost Container) 4 Sets Of Cr And Cubicle Per Unit, With Pipe And Accessories And Installation Of Piping To Existing Septic Tank 2 Unit Steel Stair Case With Landing Area, Stair Steel Frame 48 Sq.m Balcony/steel Hallway With Steel Frame 182 Sq.m. 0.425mm Thk Pre Painted Roofing With Steel Frame And Trusses Technical Specification Per Unit Of Container Van Dimension - 5.95 M L X 3.0 M W X 2.8 M H Walls - 2” Styrofoam Insulation With Double Sided 0.5mm Prepainted G.i Sheets Door - Steel Security Door With Lock Roof - Roof Insulation With Powder Coated Double Sided G.i Sheets 0.425mm Thk With Steel Frame Flooring - Magnesium Board With Heavy Duty Linoleum Or Venyl Tiles Installation Window - 2 Sets Of Aluminum Frame Sliding Window With Grills Lightning - 2 Sets Of Lightning Fixtures Electrical - Hidden Electrical Wires, Two Gang Outlets, 1 Single Switch, 1 Breaker Balcony And Stairs Steel Frame - C Channel Steel Frame Of 3mm Thk. Steel Stair - Steel Frame Of C Channel Frame Of 3mm Thk And 3mm Thk Steel Landing Area Balcony - Steel Frame Or C Channel Frame Of 3mm Thk And 3mm Thk Of Steel Hall Way Delivery Period: Within 90 Calendar Days Upon Receipt Of The Notice To Proceed Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Above-entitled Procurement Project. Delivery Of The Goods Is Required As Specified In Section Vi (schedule Of Requirements) Of The Bidding Documents. Bidders Should Have Completed Within The Period Of Five (5) Years From The Opening Of Bids. 3. Section 23.4.2.4 Of Irr Of Ra 9184. The Bidder Must Have Completed An Slcc That Is “similar” To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Psa Consumer Price Indices, Must Be At Least Fifty Percent (50%) Of The Abc. Moreover, A Contract Shall Be Considered “similar” To The Contract To Be Bid If It Has The Same Major Categories Of Work. Considering The Limited Market Of This Project, Major Categories Of Work May Include Delivery Of Similar Structures Or Goods Such As Multi-purpose Facilities, Mixed-use Buildings, Community And Exhibition Centers, And School Gymnasiums And Facilities. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 5. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 25, 2024 To December 19, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference December 02, 2024 At 2:00 O’clock In The Afternoon Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/83924717332?pwd=d95w5ha92vqtkrl9kyynjs9094wkov.1 Meeting Id: 839 2471 7332 Passcode: 282812 Deadline Of Submission Of Bids December 19, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Opening Of Bids December 19, 2024 At 03:30 P.m. Via Zoom Platform. Link: Join Zoom Meeting Https://us06web.zoom.us/j/88048186121?pwd=rndjyuqn066nmippnhkyxw0f7oxflg.1 Meeting Id: 880 4818 6121 Passcode: 399419 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/10axvkkyw7bsupj9ksn9ar8bk4lewdp3q?usp=sharing Bidding Documents Php 10,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 7. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 8. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before December 19, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 19, 2024 At 3:30 In The Afternoon At The Bac Conference Room, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend In An Online Bidding. Late Bids Shall Not Be Accepted. 9. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 10. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 12. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 13. Furthermore, Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 14. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 15. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 16. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00127 : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao 1. The Dpwh Regional Office Ii, Through The 2024 Ps-dbm Revolving Fund Intends To Apply The Sum Of ₱64,525,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00127: Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao Contract Id No. : 24b00127 Location : Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Brief Project Description : Ps-dbm Building, Generator Set With Generator Set House And Concrete Pavement, Building = 23.0 X 33.8 Meters Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures Equipment & Appliances For The Field Office Of The Engineer Other General Requirements • Permits And Clearances • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Additional Geotechnical Investigation Earthworks • Trees (furnishing And Transplanting) • Clearing And Grubbing • Removal Of Trees • Structure Excavation • Embankment (from Structure Excavation And Borrow) • Gravel Fill Subbase And Base Preparation • Aggregate Subbase Course Surface Courses • Pccp, 0.15m Thick, 14-day Concrete Plain And Reinforced Concrete Works • Structural Concrete, (3000 & 4000) Psi, Class A, 28 Days • Lean Concrete • Reinforcing Steel Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling, Metal Frame, Gypsum Board • Aluminum Metal Cladding • Modular Partition • Louver Window • Flush Door • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (casement, Awning, Fixed) Type • Frames (jambs, Sills, Head, Transoms And Mullions) • Doors, (flush, Wood Panel) • Roll-up Doors • Waterproofing, Liquid • Built-up And Preformed Membrane • Canopy Drain With Strainer • Unglazed Tiles • Cement (floor, Plaster) Finish • Stucco Finish • Painting Works, (masonry/concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel), (100 & 150) Mm • Louver Block • Metal Structure Accessories • Metal Railing (steel) • Sanitary/plumbing Fixtures • Cold Water Lines • Sewer Line Works • Storm Drainage And Downspout Electrical Works • Rigid Steel Conduit • Rigid Polyvinyl Chloride Pipes (pvc/upvc) • Boxes/wire Gutter • Fittings And Accessories • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three-way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Pop-up Type/floor Duplex Convenience Outlet/receptacle (gt) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pad Mounted Distribution Transformer (oisc) With Complete Accessories • Generator (single Or Three Phase - Standby) • Lighting Fixtures Electronic Works • Network Cabling • Cctv System • Network Video Recorder • Lcd, Led Monitor • Door Access And Card Reader System • Public Address System • System Management Amplifier • Remote Microphone • Ceiling Speaker • Wall Mount Speaker • Wires/cables • Fire Alarm System • Smoke Detector With Base • Heat Detector With Base • Fire Alarm Control Panel • Manual Pull Station Switch • Back-up Battery Pack Mechanical Works • Ventilating Equipment • Exhaust Fan (ceiling Cassette, Wall Mounted, Wall Mounted, Industrial Type) • Booster Pump With Control • Water Tank (stainless) • Fire Department Connections For Wet And Dry Type System • Air Conditioning System (vrf/vrv) • Service Elevator Approved Budget For The Contract (abc) : ₱64,525,000.00 Contract Duration : 243 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 47 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - 26, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 13, 2024, 1:00 Pm At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 26, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 26, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 6 -12, 2024 Conspicuous Place (procurement Bulletin Board): November 6 -12, 2024

Details: Description Invitation To Bid For The Supply And Delivery Of Two (2) Units Recirculating Dryer 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The National Expenditure Program Fy 2025 Intends To Apply The Sum Of Six Million Pesos (php6,000,000.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Two (2) Units Recirculating Dryer With Project Identification Number Da-rfo 1-2025-goods-014. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Early Procurement Activity (epa) Of The Above Procurement Project, In Accordance With The Provisions Under Appendix 31 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184 For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Particulars/descriptions Recirculating Dryer Design Holding Capacity: 6 Metric Tons Parts In Contact With The Commodity And Its Body Should Be Non-corrosive Performance Criteria Moisture Gradient (recirculating Type): 2% (maximum) Drying Rate: 2.0 % Per Hour Product Quality For Corn ̵ Cracked Grain/kernel(% Increase):10% Maximum ̵ Brokens/split Kernels (% ): 5% Maximum ̵ Spillage/drying Loss: 0.5% (maximum) ̵ Drying Efficiency: 75% ̵ Heating System Efficiency ̵ Petroleum Based Fuel, Indirect Fired, 75% Or Petroleum Based Fuel, Direct Fired, 90%; And Or Biomass Fuel, Direct Fired, 65% Or Biomass Fuel, Indirect Fired, 50% ̵ Operating Temperature: 60°c ̵ Moisture Reduction Rate: 2.0% Per Hour, From 20% To 14% Mc ̵ Prime Mover/power Source: Single Phase ̵ With Appropriate Electric Motor/s ̵ With Appropriate Diesel Fed Generator Set Which Will Run The Dryer (silent Type/compliant To Air Pollution Act) ̵ Dried Grain Shall Have No Additional Discoloration, Traces Of Unburned Fuel Or Ashes On Grain Surface And Fermented Or Musty Smell Classification: Batch-type, Recirculating Dryer 1. Vertical Recirculating Dryer Heating System: A. Indirect-fired Or B. Direct-fired Burner Fuel: A. Petroleum Or B. Electricity Accessories With Thermometer And Pressure Gauge Provided With Dust Collecting System With Emergency Stop Button/switch For Electric-driven Dryer With Drying Air And Grain Temperature Display With Built-in Moisture Meter With Viewing Window For Every Module With Adequate Provision For Fire Control With Centralized Panel For Switches/control Of Grain And Drying Temperature, Pressure, Voltage And Current Bagging Bin With Capacity Appropriate To The System Parts Manual Containing Full Information On Method Of Installation And Operation. The Manual Shall Be Conformed To Pns/paes Noise Level: 92 Db (a), Maximum For 6 Hours Continuous With Spray-painted Da Logo (0.5 M X 0.5m) Labelled With Rfo 1 Corn Program To Be Placed On The Visible Portion Of The Dryer With Minimum Warranty Of One (1) Year After The Date Of Acceptance Of The Unit On Engine, Accessories And Services By The End-user Except On Fan, Moving And Easy To Wear Parts Such As Fan Belts. Likewise, General Requirements Of Warranty Shall Be In Accordance To Pns-recirculating Dryer 201: 2015/paes With Heavy-duty Polyethylene Tarpaulin (trapal) Per Site Enough To Cover The Delivered Items Other Requirements: I. To Be Submitted During Bid Opening: A. Valid Amtec Test Report B. Valid Permit To Operate Issued By Bafe And Certificate Of Namdac Accreditation Issued By Pcaf C. Certificate Of Company-owned Service Center Within The Region And Service Center Must Have A Permit To Operate Issued By Bafe D. Notarized Affidavit Of Undertaking After Sales Service That Supplier Must Render Within 72 Hours Upon Receipt Of Notice From The Recipients/procuring Entity E. Certificate Of Availability Spare Parts Of The Brand/model Being Offered Within The Region To Be Issued By The Distributor/manufacturer/company Owned Service Center F. Notarized Certificate Of Stock Allocation To Be Submitted During Bid Opening Issued By The Distributor/importer Specifying The Name Of Project To Da Rfo 1 G. Certificate To Conduct On-site Technical Briefing For Operators On Operation, Maintenance, And/or Repair Of The Supplied Goods By The Supplier Ii. To Be Submitted/verified During Post-qualification A. Shall Present At Least 1 Complete Unit During Post Qualification And Valid Certificate Of Conformity Iii. To Be Submitted/inspected/verified During Delivery/after Delivery A. With Warranty Of 1 Year On Parts Of Equipment And 2 Years For Services To Be Reckoned From Date Of Delivery B. With Reflectorized Da Logo Sticker (8"x 8"), Labeled With "corn- Rfo 1" Below The Logo To Be Placed On The Generator Set C. With Metal Plate Indicating The Company Name And Active Office Landline/mobile Numbers For Easy Access Of Farmers Client D. With Heavy Duty Trapal Per Site Enough To Cover The Items Delivered E. All Units Shall Be Subjected To Acceptance Testing Upon Completion Of Delivery Of The Units Delivery Schedule: Within Twenty (20) Working Days From Receipt Of Ntp Drop-off Points: Province Quantity Pangasinan 1 Ilocos Sur 1 Total 2 Delivery Of The Goods Is Required Within Twenty (20) Working Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 21, 2024 To December 10, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 28 November 2024, 11:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 10 December 2024, 11:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 10 December 2024, 11:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. The Technical Specifications Of The Project Must Be Duly Signed/countersigned And Sealed By A Licensed Agricultural And Biosystems Engineer In Accordance With Republic Act 8559 Or Republic Act 10915; E. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. F. The Award Of Contract For Procurement Projects Undertaken Through Epa May Be Made Only Upon The Following Conditions And Shall Be In Accordance With Item 7 Of Appendix 31 Of The 2016 Revised Irr Of Ra 9184: F.1. Approval And Effectivity Of The Funding Sources, To Wit: (i) General Appropriations Act; (ii) Corporate Budget; (iii) Appropriations Ordinance; Or (iv) Loan Agreement In The Case Of Faps; Or F.2. The Reenactment Of The Previous Year’s Budget Which Constitutes The Current Year’s Authorized Budget, When Authorized By The Constitution, Law Or Rules. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ November 20, 2024 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-014

Details: Description Republic Of The Philippines Bids And Awards Committee City Of Dapitan November 07, 2024 Invitation To Bid The City Government Of Dapitan, Through Its Bids And Awards Committee (bac), Invites Interested Parties To Apply For Eligibility And If Found Eligible To Bid For The Following Contract: Contract Id: Pr# 2024-10-28-515, 516, 517, 518, 519, 520, 521, 522, 523, 524, 525 & 526 Contract Name: Procurement Of Vehicle Parts & Accessories Purpose: For Official Use In The Motorpool Division, City Engineering Office, This City Approved Budget For The Contract (abc): Php 3,434,485.00 (inclusive Of All Applicable Taxes) Source Of Fund: General Fund • Prospective Bidders Should Have Expertise In Undertaking A Similar Project Within The Last Three (3) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. • Bidders / Contractor’s Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents. • Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates. • The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post Qualification Of The Lowest/single Calculated Bid Shall Be Conducted. • All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr). The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting November 08 – 15, 2024 Availability And Issuance Of Bidding Documents Nov. 08 – Dec. 03, 2024; 1:30 P.m. Pre-bid Conference November 19, 2024; 2:00 P.m Deadline For The Submission Of Bids December 03, 2024; 1:30 P.m Bid Evaluation December 03, 2024; 2:00 P.m • Philippine Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The City Of Dapitan. (bacdapitan@gmail.com) • Payment For The Philippine Bidding Documents Is A Non – Refundable Amount Of Five Thousand Pesos Only (php 5,000.00) Payable To The Office Of The City Treasurer, Dapitan City. The City Government Of Dapitan Assumes No Responsibility Whatsoever Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. The City Government Of Dapitan Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Rejects All Bids At Any Time Prior To Award Of Contract, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. Sgd.engr. Renmar Terenz E. Draper Cgdh I, Management Information Systems Office Bac Chairman Annex A: Pr# 2024-10-28-515 - P470,170.00 1. 10 Gals Diesel Engine Oil 2. 10 Liters Gear Oil 10 3. 15 Bots Spray Paint Black (oil) 4. 2 Pcs Cross Bearing 555 5. 1 Set Wiper Blade Isuzu Elf Green 6. 4 Liters Brake Fluid 7. 1 Set Industrial Glove 8. 2 Gals Radiator Coolant 9. 1 Set Brake Shoe Isuzu Elf Dropside 10. 1 Set Release Bearing 555 11. 1 Pc Clutch Disc Garbage Compactor 12. 1 Set Brake Pad Mini Bus Coaster 13. 1 Pc Oil Filter Coaster 14. 1 Pc Grease Nipple 15. 1 Pc Oil Filter Dumptruck 16. 1 Set Brake Shoe Raptor 17. 10 Pcs Contact Cleaner 18. 1 Tank Acetylene 19. 1 Tank Industrial Oxygen 20. 1 Pc Grease Gun Hose 21. 1 Pc Oil Filter Shackman Dumptruck 22. 1 Pc Fuel Filter Shackman 23. 2 Pcs Fes- 5640 24. 24 Liters Top 1 Coolant 25. 2 Pcs Wheel Cylinder 26. 5 Pcs Oil Filter (unit3) Ambulance Cdrrmo 27. 1 Pc Center Bearing 28. 8 Pcs Rubber Bushing 29. 1 Pc Isoyo Bearing 30. 1 Pc Labor/replace Bearing 31. 1 Pail Gear Oil 140 32. 1 Box Welding Rod 33. 1 Pc Fuel Filter 34. 1 Set Brake Pad 35. 4 Pcs Battery 21 Plates 36. 5 Pcs Battery 11 Plates 37. 6 Pcs Battery 7 Plates 38. 8 Pcs Tires 195 R14 39. 2 Pcs Tires 7.00 – 16 40. 8 Pcs Tires 6.40 – 6.50 41. 1 Unit Labor & Maintenance 42. 24 Liters Gasoline Engine Oil 43. 1 Pc Starter Rewind / Labor 44. 5 Pcs Oil Filter C- 034 45. 2 Pcs Tires 185 R 14 Pr# 2024-10-28-516 - P552,810.00 1. 9 Gals Diesel Engine Oil 2. 10 Liters Cyclone 2t 3. 39 Liters Havoline Gasoline Oil 4. 4 Liters 1l Brake Fluid Preston 5. 16 Pcs Battery 11 Plates 6. 9 Pails Cyclone Hydraulic Oil 10 7. 1 Pc Battery 17 Plates 8. 1 Pail Volga Grease 9. 1 Pail Oil 90 10. 1 Pail Oil 140 11. 1 Pail Oil 40 12. 12 Gals Top 1 Coolant 13. 6 Gals Transmission Fluid 14. 1 Pc Oil Filter Vic – Hilux 15. 1 Set Brake Pad Mit. Strada 16. 4 Gals Diesel Oil Caltex 17. 1 Pc Oil Filter Vic- Fortuner 18. 1 Pc Fuel Bosch – Hilux 19. 1 Pc Tire Blade 20. 1 Pc Oil Filter Vic – Montero 21. 1 Pc Contact Cleaner 22. 2 Pcs Tires 265/70r17 – Montero 23. 4 Pcs Tires 265/ 65r17 – Fortuner 24. 4 Pcs Tires 285/ 70r17 – Raptor 25. 1 Set Wheel Alignment – Fortuner 26. 1 Pc Amaron Battery – Raptor (# Of Plates) 11 27. 3 Vehicle Wheel Alignment/ Balance – Cdrrmo/ A. 28. 1 Set Crimping Hydraulic Hose – Loader 29. 4 Pcs Tires 265/ 60r18 – Fortuner 30. 2 Pcs Oil Filter Vic – Traviz 31. 4 Pcs Tires 265/ 65r17 Pr# 2024-10-28-517 - P201,140.00 1. 1 Pc Oil Filter B-38 2. 1 Pc Oil Filter A- 47 3. 2 Pcs Wiper Arm Toyota Hi- Ace 4. 2 Pcs Wiper Blade Toyota Hi- Ace 5. 1 Pc Tire Gauge 6. 1 Pc Feeler Gauge 7. 2 Pails Hydraulic Oil 40 8. 3 Pcs Tire/ Tire Tube 4x8 9. 5 Liters Brake Fluid 10. 10 Rolls Electrical Tape 11. 3 Pcs Epoxy 12. 1 Set Cable Tie 13. 3 Pcs Oil Filter C- 111 14. 1 Pc Oil Filter C- 034 15. 1 Pc Clutch Operating Assy. Crosswind 16. 1 Pc Pressure Plate – Montero 17. 1 Pc Grinding Compound 18. 1 Pc Alternator Pulley 19. 1 Pc Cylinder Head Reface 20. 1 Unit Radiator Overhauled & Repair 21. 1 Unit Aircon Repair And Maintenance – Van 22. 1 Pc Hydraulic Hose Crimping ¾ 4w 2.5 Ft. 23. 6 Pcs W8dc Sparkplug Bosch 24. 2 Pcs Battery 11 Plates 25. 5 Pcs Sand Paper #30 26. 5 Pcs Sand Paper # 800 27. 1 Pc Quick Metal Sealant 28. 1 Unit Aircon Repair And Maintenance – Crosswind 29. 1 Unit Aircon Repair And Maintenance – Navara 30. 1 Pc Generator – Avr – City Hall 31. 1 Pc Generator – Water Temp. Switch W/ Senseor – City Hall Pr# 2024- 10-28-518 - P308,310.00 1. 1 Pc Alternator Repair Toyota Pnp 2. 4 Pails Oil 40 3. 1 Pc Pullyhernatorpully Hilux 4. 1 Pc Bearing Hilux Toyota 5. 1 Pc Brush Holder 6. 3 Pcs Solenoid Switch 7. 1 Set Horn 24v 8. 1 Pc Cylinder Head Gasket 9. 10 Pcs Nylon Tie 10. 1 Pc Fuel Pump Assy. 4k 11. 8 Pcs Glowplug– Bongo 12. 1 Pc Alternator Pully – Navara 13. 5 Pcs Hub Bolt 14. 5 Pcs Hub Nut 15. 1 Set Overhauling Gasket Ford Ranger Black 16. 1 Pc Turn Buckle ¾ 17. 1 Pc Relay 18. 1 Pc Push Button Switch 19. 1 Set Brake Pad – Ford Raptor 20. 1 Unit Toyota Hilux Repair & Maintenance 21. 2 Sets Stud Bolt And Nut 22. 8 Pcs Tires 265/ 60r18 A/t 23. 6 Pcs Tires 225/ 70r15 24. 10 Pcs Tires 7.00 – 16 12pr R18 25. 6 Pcs Tires 165r13 Sl305 Pr# 2024-10-28-519 - P360,170.00 1. 2 Tank Industrial Oxygen 2. 1 Unit Repair & Maintenance Raptor – Admin 3. 1 Unit Repair & Maintenance Raptor – Cmo 4. 4 Pcs Tires 285/ 70r17 – Raptor Admin 5. 1 Pail Atlantic Grease 6. 1 Box Nihon Welding Rod N – 6012 7. 1 Pc Fabricate Hydraulic Hose 36/24 8. 4 Pcs Tires 265/ 60r18 9. 132 Liters Gasoline Engine Oil 10. 12 Pails Diesel Engine Oil 11. 2 Pcs Battery N70 12. 24 Liters 2t Cyclon Oil 13. 2 Pcs Pump Assembly Ranger 14. 2 Pcs Wheel Cylinder 15. 2 Pcs Gasket Hilux Pnp 16. 1 Set Sparkplug Cable 17. 1 Set Tie Rod End Crosswind 18. 1 Pc Clutch Disc Travis 19. 1 Pc Release Bearing 20. 1 Pc Release Bearing F6a 21. 1 Liter Brake Fluid 22. 2 Gals Coolant 23. 1 Pc Engine Support 1 Mb- 581845 24. 1 Pc Oil Filter C- 306 25. 1 Pc Oil Filter C-111 26. 10 Ft Fuel Hose 6/16 27. 1 Pc Gws- 19a Water Pump 28. 1 Pc Fabricate Hydraulic Hose 42/28 Pr# 2024-10-28-520 - P143,000.00 1. 1 Unit Labor & Materials – Xpander 2. 1 Set Brake Pad – Xpander 3. 1 Set Brake Shoe – Xpander 4. 4 Pcs Brake Springs – Xpander 5. 1 Unit Labor & Materials – Raptor 6. 1 Unit Labor & Materials – Montero 7. 2 Pails Oil Diesel Engine 8. 1 Unit Battery 11 Plates 9. 3 Unit Battry 9 Plates 10. 1 Set Brake Pad - Strada 11. 1 Pc Wd40 12. 1 Pc Contact Cleaner 13. 1 Pail Gasoline Oil 14. 1 Unit Labor & Materials 15. 1 Unit Wheel Allignment / Replace Tires Pr# 2024-10-28-521 - P278,400.00 1. 10 Pcs Tires 10.00 – 20 16pr Mix – Lug 2. 12 Pcs Tires 7.00 -16 12pr Mix- Lug 3. 6 Pcs Tires 185r14 8pr Pr# 2024-10-28-522 - P198,670.00 1. 1 Set Rotor Disc Repace – Raptor Admin 2. 10 Ft Steel Tube #16 3. 1 Pc Sparkplug 4. 1 Tank Industrial Oxygen 5. 2 Tanks Industrial Acytelene 6. 1 Set Spraket, Chain & Engine Spraket – Xr150 7. 1 Set Gasket 4jg2 01h 8. 2 Sets Brake Drum – Expander 9. 6 Pcs Brake Chamber Ub035 10. 5 Pcs Truck Tire Rubber Nbr – 70 11. 2 Pcs Coil Spring – Montero 12. 1 Pc Center Bearing –fortuner 13. 1 Unit Repair & Maintenance & Materials – Raptor 14. 1 Unit Aircon Repair Maintenance & Materials – M&s 15. 1 Unit Aircon Repair Maintenance & Materials - Ranger 16. 1 Unit Aircon Repair Maintenance & Materials - Travis 17. 1 Unit Aircon Repair Maintenance & Materials – Hilux Pr# 2024-10-28-523 P280,330.00 1. 1 Unit Toyota Hilux Labor Service & Maintenance 2. 1 Pc Remote Replacement & Programming- Raptor/ Mayor 3. 1 Unit Ford Raptor Labor Services & Maintenance – Admin 4. 1 Unit Ford Raptor Labor Services & Maintenance – Mayor Pr# 2024-10-28-524 - P206,740.00 1. 1 Pc Auxiliary Fan 2. 1 Pc Evaporator Aircon D-max 3. 1 Can Sp10 Compressor Oil 4. 1 Klsfreon 134a Solfron 5. 1 Pc Air Filter – 140266-0 6. 5 Pcs Fuel Filter Ud Truck 7. 4 Pcs Oil Filter Ud 8. 10 Meters Chemical Hose 9. 1 Gals Top 1 Coolant 10. 1 Pc Oil Filter D-max 11. 9 Pcs Backrest Single 12. 1 Pc Turbo Hose 13. 10 Sets Battery Terminal 14. 5 Kgs Welding Rod 15. 10 Pcs Wd40 16. 24 Liters Apex Gasoline Engine Oil 17. 5 Pcs Backrest Double 18. 4 Pcs Glowplug 19. 1 Pc Oil Filter Vic 20. 5 Pcs Oil Filter C – 114 21. 1 Pail Diesel Engine Oil 22. 3 Pcs Tire Tube – 4.00x8 23. 5 Pcs Oil Filter – Ud Truck 24. 2 Pcs Fan Belt – Isuzu Elf 25. 24 Liters Gasoline Oil 26. 1 Pc Clutch Lining – Isuzu Elf 27. 1 Pc Release Bearing 28. 1 Pc Brass Holder 29. 2 Pcs Shock Absorber 30. 1 Set Industrial Gloves 31. 1 Set Cable Tie Lock 32. 1 Pc Oil Filter Vic 33. 1 Pc Oil Seal 34. 1 Pc Break Cleaner 35. 1 Pc Throttle Cleaner 36. 1 Pc Oil Filter 37. 4 Pcs Hose Clamp 38. 24 Liters Automatic Transmission Fluid 39. 4 Sets Battery Terminal Bronze 40. 1 Set Brake Disk Pad Db1841 41. 1 Pc Oil Filter C- 207 Bosch 42. 1 Pc Tubo Hose Pr# 2024-10-28-525 - P219,925.00 1. 4 Pcs Battery 21 Plates 2. 5 Pcs Battery 11 Plates 3. 12 Pcs Lug Nut Suv 4. 2 Pcs Distributor Cap – Multicab 5. 6 Pcs Sparkplug 6. 1 Set Carborator Replacement Kit – Multicab 7. 1 Set Brake Pad – Navara 8. 4 Pcs Bearing 9. 8 Pcs Rubber Cap – Hilux 10. 1 Pc Clutch Slave – Dropside Isuzu Elf 11. 10 Pcs Sand Paper 12. 1 Pc Gas Tank Cap – Dumptruck 13. 12 Liters Brake Fluid 14. 4 Pcs Tie Rod End 15. 2 Pcs Ball Joint – 555 Upper 16. 2 Pcs Ball Joint – 555 Lower 17. 1 Pc Gas Cable – Multicab 18. 1 Pc Hand Brake Cable – Ford Ranger 19. 3 Pcs Oil Filter Vic – Xpander 20. 2 Pcs Adjuster 21. 1 Pc Oil Filter 30207 22. 1 Pc Fuel Filter 30210 23. 12 Pcs Lug Nut Stainless 24. 1 Pc Oil Filter Vic 25. 1 Pc Oil Filter 26. 1 Pc Clip Slave 27. 1 Pc Clip Hose 28. 1 Pc Wd40 29. 1 Pc Fuel Filter Vic 30. 1 Ft Fuel Hose 31. 1 Pc Fuel Pump 32. 2 Pcs Hose Clamp 33. 185 Pcs Tire Patch 34. 8 Pcs Rubber Cap 11/16 35. 1 Set Head Light Bulb 36. 2 Btls Brake Cleaner 37. 12 Pcs Battery Terminal 38. 2 Pcs Shock Absorber 39. 8 Pcs Oil Seal 40. 2 Pcs Oil Filter 41. 5 Pcs Gasket All Pr# 2024-10-28-526 - P214,280.00 1. 180 Liters Diesel Engine Oil 2. 4 Pails Gear Oil 10 3. 2 Pails Hydraulic Oil 4. 1 Unit Car Aircon Repair And Maintenance – Raptor 5. 2 Pcs Tires 185 R14 6. 1 Unit Alternator Repair – Ranger 7. 4 Pcs Truck Bolt And Nut Set 8. 8 Pcs Tires 185/ 65 R15 9. 1 Set Brake Pad 10. 8 Pcs Rubber Cup 11. 4 Pcs Brake Shoe Bondng – Isuzu Elf 12. 1 Set Battery Terminal Bolt And Nut Truck 13. 2 Set Brake Pad – Toyota Hi-ace 14. 1 Set Stud Bolt And Nut 15. 1 Pc Oil Filter – Shackman 16. 2 Set Suspension Arm – Navara 17. 2 Set The Rod End – Isuzu Crosswind 18. 4 Pcs Wheel Cylinder Assy - Coaster 19. 2 Pcs Gasket All 20. 4 Pcs Gasket Maker 21. 4 Liters Brake Fluid 22. 4 Pcs Oil Filter – 034 23. 1 Set Brake Pad 24. 6 Pcs Rubber Cup ¼ 25. 3 Bolts Wd40 26. 10 Rolls Electrical Tape 27. 2 Set Wiper Blade #16