Paint Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Mindoro Oriental District Engineering Office Masipit, Calapan City, Oriental Mindoro, Mimaropa Region (iv-b) October 25, 2024 Invitation To Bid For The Following Projects: (gaa Fy 2025 Projects) 1. 25ed0035 – Construction Of Road, Sitio Iv, Barangay Aurora, Naujan, Oriental Mindoro 2. 25ed0036 - Construction Of Road, Sitio Silangan, Matulatula, Pola, Oriental Mindoro 3. 25ed0037 - Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Malamig, Calapan City, Oriental Mindoro 4. 25ed0038 - Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Pachoca, Calapan City, Oriental Mindoro 5. 25ed0039 - Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Tigkan, Naujan, Oriental Mindoro 6. 25ed0040 - Construction Of Flood Control Structure Along Sitio Bagong Pook, Brgy. Gutad, Calapan City, Oriental Mindoro 7. 25ed0041 - Construction Of Flood Control Structure, Barangay Camansihan, Calapan City, Oriental Mindoro 8. 25ed0042 - Construction Of Flood Control Structure, Barangay Buhuan, Calapan City, Oriental Mindoro 9. 25ed0043 - Construction Of Road Dike Along Bagtu River, Barangay Arangin, Naujan, Oriental Mindoro 10. 25ed0044 - Concreting Of Road Phase Ii, Sitio Arungyanan Ii, Barangay Sta. Rosa I, Baco, Oriental Mindoro 11. 25ed0045 - Construction Of Road, Barangay Aninuan, Puerto Galera, Oriental Mindoro 12. 25ed0046 - Construction Of Road, San Carlos, Naujan, Oriental Mindoro 13. 25ed0047 - Rehabilitation Of Road, Sitio Babaloan, Barangay Poblacion Iii, Victoria, Oriental Mindoro 14. 25ed0048 - Construction Of Road, Barangay San Andres, Naujan, Oriental Mindoro 15. 25ed0049 - Construction Of Road, Sitio Granvida, Barangay Bugtong Na Tuog, Socorro, Oriental Mindoro 16. 25ed0050 - Construction Of Drainage Structure, Barangay Tibag – Barangay Pachoca, Calapan City, Oriental Mindoro 1. The Department Of Public Works And Highways – Mindoro Oriental District Engineering Office, Through The Gaa 2025 Intends To Apply The Sums Below Of Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Following. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Contract I.d. No. Approved Budget For The Contract 25ed0035 Php 4,900,000.00 25ed0036 Php 4,900,000.00 25ed0037 Php 1,980,000.00 25ed0038 Php 1,980,000.00 25ed0039 Php 1,980,000.00 25ed0040 Php 49,000,000.00 25ed0041 Php 99,000,000.00 25ed0042 Php 99,000,000.00 25ed0043 Php 112,425,600.00 25ed0044 Php 4,900,000.00 25ed0045 Php 4,900,000.00 25ed0046 Php 4,900,000.00 25ed0047 Php 4,900,000.00 25ed0048 Php 4,950,000.00 25ed0049 Php 4,950,000.00 25ed0050 Php 4,950,000.00 2. The Department Of Public Works And Highways – Mindoro Oriental District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 2.1 Contract I.d. No. : 25ed0035 Name Of Contract : Construction Of Road, Sitio Iv, Barangay Aurora, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : 1. Construction Of Road: Width = 5.0 M.; Thickness = 0.20m.; Length = 444.00 M.; Aggregate Subbase Course Thickness = 0.20 M.; Shoulder Width = 0.50 M. 2. Construction Of Slope Protection: 1. Slope Protection L/s: L=60.00 M. 2. Slope Protection R/s: L=10.00 M. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.2 Contract I.d. No. : 25ed0036 Name Of Contract : Construction Of Road, Sitio Silangan, Matulatula, Pola, Oriental Mindoro Location : Pola, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk=0.20 M.) With Total Length Of 445.00 M. With Proposed Rcpc At Selected Section. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.3 Contract I.d. No. : 25ed0037 Name Of Contract : Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Malamig, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Completion Of 17.00 M. X 30.00 M. Covered Court With Repainting Of Masonry And Steel Fences With 3 Steps Of Bleachers (19.80 Ln.m.) With Roof And Fence, Roofing Of 30 Ln.m. Bleachers With Nonslip Finish Flooring And Sidings Enclosure Of Court With Ceiling And Electrical Works Of Stage Approved Budget For The Contract : Php 1,980,000.00 Contract Duration : 90 C.d. 2.4 Contract I.d. No. : 25ed0038 Name Of Contract : Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Pachoca, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Completion Of 15.00 M. X 27.00 M. Covered Court With Repainting Of Trusses, Roof Sidings. With 3 Steps Of Bleachers (27 Ln.m.) With Roofing. With 9.00 M. X 4.50 M. Stage With Cr, Ceiling Works, Tile Works And Electrical Works. With Replacement Of Lighting Fixture Of Covered Court. Approved Budget For The Contract : Php 1,980,000.00 Contract Duration : 90 C.d. 2.5 Contract I.d. No. : 25ed0039 Name Of Contract : Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Tigkan, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : Completion Of 15.00 M. X 27.00 M. Covered Court. With 3 Bay Of Roofing Works, Plastering, Painting Works Of Masonry And Steel. With Flashings, Roof Sidings. Approved Budget For The Contract : Php 1,980,000.00 Contract Duration : 90 C.d. 2.6 Contract I.d. No. : 25ed0040 Name Of Contract : Construction Of Flood Control Structure Along Sitio Bagong Pook, Brgy. Gutad, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Construction Of 126.40 L.m. Concrete Revetment Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 49,000,000.00 Contract Duration : 273 C.d. 2.7 Contract I.d. No. : 25ed0041 Name Of Contract : Construction Of Flood Control Structure, Barangay Camansihan, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Construction Of 286.40 L.m. Concrete Revetment Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 99,000,000.00 Contract Duration : 333 C.d. 2.8 Contract I.d. No. : 25ed0042 Name Of Contract : Construction Of Flood Control Structure, Barangay Buhuan, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Construction Of 263.20 L.m. Concrete Revetment Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 99,000,000.00 Contract Duration : 333 C.d. 2.9 Contract I.d. No. : 25ed0043 Name Of Contract : Construction Of Road Dike Along Bagtu River, Barangay Arangin, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : Construction Of 128.00 L.m. Road Dike With Geotube Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 112,425,600.00 Contract Duration : 333 C.d. 2.10 Contract I.d. No. : 25ed0044 Name Of Contract : Concreting Of Road Phase Ii, Sitio Arungyanan Ii, Barangay Sta. Rosa I, Baco, Oriental Mindoro Location : Baco, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 468.00 M. 2. Installation Of Solar Led Streetlights. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.11 Contract I.d. No. : 25ed0045 Name Of Contract : Construction Of Road, Barangay Aninuan, Puerto Galera, Oriental Mindoro Location : Puerto Galera, Oriental Mindoro Scope Of Works : 1. Concreting Of 134.00 L.m. Of Road (width = 4.5 M., 0.20 M. Thk. Pccp, 0.23 M. Thk. Aggregate Subbase Course) With 1.00 M. Gravel Shoulder On B/s And Drainage Canal On R/s Only. 2. Concreting Of 80.00 L.m. Of Road (width = 5.0 M., 0.23 M. Thk. Pccp, 0.20m. Thk. Aggregate Subbase Course) 3. Construction Of 11.50 M. Of Slope Protection (retaining Wall) On L/s Only And 20.00 M. On R/s Only. 4. Construction Of 6 M. (double Barrel) Box Culvert. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.12 Contract I.d. No. : 25ed0046 Name Of Contract : Construction Of Road, San Carlos, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 464.00 M. With 1.00 M. Gravel Shoulder On Both Sides. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.13 Contract I.d. No. : 25ed0047 Name Of Contract : Rehabilitation Of Road, Sitio Babaloan, Barangay Poblacion Iii, Victoria, Oriental Mindoro Location : Victoria, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 474.50 M. With 1.00 M. Gravel Shoulder On Both Sides At Selected Section. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 88 C.d. 2.14 Contract I.d. No. : 25ed0048 Name Of Contract : Construction Of Road, Barangay San Andres, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 474.50 M. With Gravel Shoulder On Bs, Width = Varies (0.50 M. – 1.00 M.). 2. Construction Of Grouted Riprap – 60.00 L.m. On R.s. And 311.30 L.m. On R.s. 3. Installation Of 2.00 L.m. Rcpc, Diameter = 0.60 M., With Headwall. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 70 C.d. 2.15 Contract I.d. No. : 25ed0049 Name Of Contract : Construction Of Road, Sitio Granvida, Barangay Bugtong Na Tuog, Socorro, Oriental Mindoro Location : Socorro, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 444.00 M. With Proposed Slope Protection And Edge Protection At Selected Section And No Shoulder On Both Sides. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 88 C.d. 2.16 Contract I.d. No. : 25ed0050 Name Of Contract : Construction Of Drainage Structure, Barangay Tibag – Barangay Pachoca, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : 1. Installation Of 173.50 L.m. Rcpc Drainage Only Size 0.60 M. Dia. At Left Side. 2. Installation Of 45.50 L.m. Rcpc Drainage Size 0.90 M. Dia. With Curb And Gutter At Right Side. 3. Installation Of 240.50 L.m. Rcpc Drainage Only Sized 0.90 M. Dia. At Right Side Only. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 195 C.d. Bidders Should Have Completed A Contract Similar To The Project. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category. The Description Of An Eligible Bidders Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 8:00 Am To 5:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. In View Of The Full Implementation On Assigning Only Qualified And Competent Engineers Of The Contractors And Consultants In The Implementation Of Dpwh Projects, Please Be Reminded Of Department Order No. 98 S. 2016 “limits Of Assignment Of Contractors’/consultants’ Materials Engineers” And Department Order No. 118 S. 2024 “guideline On The Accreditation And Assignment Of Contractor’s And Consultants’ Project Engineers”. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Prospective Bidders May Obtain Further Information From The Department Of Public Works And Highways, Mindoro Oriental District Engineering Office And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 30 – November 21, 2024 From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Contract I.d. Number Amount 25ed0035 Php 5,000.00 25ed0036 Php 5,000.00 25ed0037 Php 5,000.00 25ed0038 Php 5,000.00 25ed0039 Php 5,000.00 25ed0040 Php 25,000.00 25ed0041 Php 50,000.00 25ed0042 Php 50,000.00 25ed0043 Php 50,000.00 25ed0044 Php 5,000.00 25ed0045 Php 5,000.00 25ed0046 Php 5,000.00 25ed0047 Php 5,000.00 25ed0048 Php 5,000.00 25ed0049 Php 5,000.00 25ed0050 Php 5,000.00 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided Thast Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways, Mindoro Oriental District Engineering Office Will Hold A Pre-bid Conference On November 6, 2024 @ 9:30 A.m. At Bidding Room, Dpwh – Modeo, Masipit, Calapan City, Oriental Mindoro And/or Through Video Conferencing Or Webcasting Via Zoom Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_mindorooriental@dpwh.gov.ph For Electronic Submission On Or Before November 21, 2024 @ 10:00 A.m. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On November 21, 2024, Immediately After The Deadline For The Submission Of Bid At Bidding Room, Dpwh – Modeo, Masipit, Calapan City, Oriental Mindoro And/or Through Zoom. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 13. The Department Of Public Works And Highways, Mindoro Oriental District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Engr. Agnes M. Bueno Department Of Public Works And Highways Mindoro Oriental District Engineering Office Masipit, Calapan City, Oriental Mindoro Bueno.agnes@dpwh.gov.ph (043) 288-9365 Albien M. Mahia Bac Chairperson

Details: Description Republic Of The Philippines Department Of Public Works And Highways Mindoro Oriental District Engineering Office Masipit, Calapan City, Oriental Mindoro, Mimaropa Region (iv-b) October 25, 2024 Invitation To Bid For The Following Projects: (gaa Fy 2025 Projects) 1. 25ed0035 – Construction Of Road, Sitio Iv, Barangay Aurora, Naujan, Oriental Mindoro 2. 25ed0036 - Construction Of Road, Sitio Silangan, Matulatula, Pola, Oriental Mindoro 3. 25ed0037 - Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Malamig, Calapan City, Oriental Mindoro 4. 25ed0038 - Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Pachoca, Calapan City, Oriental Mindoro 5. 25ed0039 - Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Tigkan, Naujan, Oriental Mindoro 6. 25ed0040 - Construction Of Flood Control Structure Along Sitio Bagong Pook, Brgy. Gutad, Calapan City, Oriental Mindoro 7. 25ed0041 - Construction Of Flood Control Structure, Barangay Camansihan, Calapan City, Oriental Mindoro 8. 25ed0042 - Construction Of Flood Control Structure, Barangay Buhuan, Calapan City, Oriental Mindoro 9. 25ed0043 - Construction Of Road Dike Along Bagtu River, Barangay Arangin, Naujan, Oriental Mindoro 10. 25ed0044 - Concreting Of Road Phase Ii, Sitio Arungyanan Ii, Barangay Sta. Rosa I, Baco, Oriental Mindoro 11. 25ed0045 - Construction Of Road, Barangay Aninuan, Puerto Galera, Oriental Mindoro 12. 25ed0046 - Construction Of Road, San Carlos, Naujan, Oriental Mindoro 13. 25ed0047 - Rehabilitation Of Road, Sitio Babaloan, Barangay Poblacion Iii, Victoria, Oriental Mindoro 14. 25ed0048 - Construction Of Road, Barangay San Andres, Naujan, Oriental Mindoro 15. 25ed0049 - Construction Of Road, Sitio Granvida, Barangay Bugtong Na Tuog, Socorro, Oriental Mindoro 16. 25ed0050 - Construction Of Drainage Structure, Barangay Tibag – Barangay Pachoca, Calapan City, Oriental Mindoro 1. The Department Of Public Works And Highways – Mindoro Oriental District Engineering Office, Through The Gaa 2025 Intends To Apply The Sums Below Of Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Following. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Contract I.d. No. Approved Budget For The Contract 25ed0035 Php 4,900,000.00 25ed0036 Php 4,900,000.00 25ed0037 Php 1,980,000.00 25ed0038 Php 1,980,000.00 25ed0039 Php 1,980,000.00 25ed0040 Php 49,000,000.00 25ed0041 Php 99,000,000.00 25ed0042 Php 99,000,000.00 25ed0043 Php 112,425,600.00 25ed0044 Php 4,900,000.00 25ed0045 Php 4,900,000.00 25ed0046 Php 4,900,000.00 25ed0047 Php 4,900,000.00 25ed0048 Php 4,950,000.00 25ed0049 Php 4,950,000.00 25ed0050 Php 4,950,000.00 2. The Department Of Public Works And Highways – Mindoro Oriental District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 2.1 Contract I.d. No. : 25ed0035 Name Of Contract : Construction Of Road, Sitio Iv, Barangay Aurora, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : 1. Construction Of Road: Width = 5.0 M.; Thickness = 0.20m.; Length = 444.00 M.; Aggregate Subbase Course Thickness = 0.20 M.; Shoulder Width = 0.50 M. 2. Construction Of Slope Protection: 1. Slope Protection L/s: L=60.00 M. 2. Slope Protection R/s: L=10.00 M. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.2 Contract I.d. No. : 25ed0036 Name Of Contract : Construction Of Road, Sitio Silangan, Matulatula, Pola, Oriental Mindoro Location : Pola, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk=0.20 M.) With Total Length Of 445.00 M. With Proposed Rcpc At Selected Section. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.3 Contract I.d. No. : 25ed0037 Name Of Contract : Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Malamig, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Completion Of 17.00 M. X 30.00 M. Covered Court With Repainting Of Masonry And Steel Fences With 3 Steps Of Bleachers (19.80 Ln.m.) With Roof And Fence, Roofing Of 30 Ln.m. Bleachers With Nonslip Finish Flooring And Sidings Enclosure Of Court With Ceiling And Electrical Works Of Stage Approved Budget For The Contract : Php 1,980,000.00 Contract Duration : 90 C.d. 2.4 Contract I.d. No. : 25ed0038 Name Of Contract : Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Pachoca, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Completion Of 15.00 M. X 27.00 M. Covered Court With Repainting Of Trusses, Roof Sidings. With 3 Steps Of Bleachers (27 Ln.m.) With Roofing. With 9.00 M. X 4.50 M. Stage With Cr, Ceiling Works, Tile Works And Electrical Works. With Replacement Of Lighting Fixture Of Covered Court. Approved Budget For The Contract : Php 1,980,000.00 Contract Duration : 90 C.d. 2.5 Contract I.d. No. : 25ed0039 Name Of Contract : Construction (completion) Of Multi – Purpose Building (covered Court), Barangay Tigkan, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : Completion Of 15.00 M. X 27.00 M. Covered Court. With 3 Bay Of Roofing Works, Plastering, Painting Works Of Masonry And Steel. With Flashings, Roof Sidings. Approved Budget For The Contract : Php 1,980,000.00 Contract Duration : 90 C.d. 2.6 Contract I.d. No. : 25ed0040 Name Of Contract : Construction Of Flood Control Structure Along Sitio Bagong Pook, Brgy. Gutad, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Construction Of 126.40 L.m. Concrete Revetment Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 49,000,000.00 Contract Duration : 273 C.d. 2.7 Contract I.d. No. : 25ed0041 Name Of Contract : Construction Of Flood Control Structure, Barangay Camansihan, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Construction Of 286.40 L.m. Concrete Revetment Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 99,000,000.00 Contract Duration : 333 C.d. 2.8 Contract I.d. No. : 25ed0042 Name Of Contract : Construction Of Flood Control Structure, Barangay Buhuan, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : Construction Of 263.20 L.m. Concrete Revetment Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 99,000,000.00 Contract Duration : 333 C.d. 2.9 Contract I.d. No. : 25ed0043 Name Of Contract : Construction Of Road Dike Along Bagtu River, Barangay Arangin, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : Construction Of 128.00 L.m. Road Dike With Geotube Resting On Concrete Pile Cap With 12 M. Steel Sheet Piles (u-type Iii) Approved Budget For The Contract : Php 112,425,600.00 Contract Duration : 333 C.d. 2.10 Contract I.d. No. : 25ed0044 Name Of Contract : Concreting Of Road Phase Ii, Sitio Arungyanan Ii, Barangay Sta. Rosa I, Baco, Oriental Mindoro Location : Baco, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 468.00 M. 2. Installation Of Solar Led Streetlights. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.11 Contract I.d. No. : 25ed0045 Name Of Contract : Construction Of Road, Barangay Aninuan, Puerto Galera, Oriental Mindoro Location : Puerto Galera, Oriental Mindoro Scope Of Works : 1. Concreting Of 134.00 L.m. Of Road (width = 4.5 M., 0.20 M. Thk. Pccp, 0.23 M. Thk. Aggregate Subbase Course) With 1.00 M. Gravel Shoulder On B/s And Drainage Canal On R/s Only. 2. Concreting Of 80.00 L.m. Of Road (width = 5.0 M., 0.23 M. Thk. Pccp, 0.20m. Thk. Aggregate Subbase Course) 3. Construction Of 11.50 M. Of Slope Protection (retaining Wall) On L/s Only And 20.00 M. On R/s Only. 4. Construction Of 6 M. (double Barrel) Box Culvert. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.12 Contract I.d. No. : 25ed0046 Name Of Contract : Construction Of Road, San Carlos, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 464.00 M. With 1.00 M. Gravel Shoulder On Both Sides. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 69 C.d. 2.13 Contract I.d. No. : 25ed0047 Name Of Contract : Rehabilitation Of Road, Sitio Babaloan, Barangay Poblacion Iii, Victoria, Oriental Mindoro Location : Victoria, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 474.50 M. With 1.00 M. Gravel Shoulder On Both Sides At Selected Section. Approved Budget For The Contract : Php 4,900,000.00 Contract Duration : 88 C.d. 2.14 Contract I.d. No. : 25ed0048 Name Of Contract : Construction Of Road, Barangay San Andres, Naujan, Oriental Mindoro Location : Naujan, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 474.50 M. With Gravel Shoulder On Bs, Width = Varies (0.50 M. – 1.00 M.). 2. Construction Of Grouted Riprap – 60.00 L.m. On R.s. And 311.30 L.m. On R.s. 3. Installation Of 2.00 L.m. Rcpc, Diameter = 0.60 M., With Headwall. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 70 C.d. 2.15 Contract I.d. No. : 25ed0049 Name Of Contract : Construction Of Road, Sitio Granvida, Barangay Bugtong Na Tuog, Socorro, Oriental Mindoro Location : Socorro, Oriental Mindoro Scope Of Works : 1. Concreting Of 5 M. Width Road (thk = 0.20 M.) With Total Length Of 444.00 M. With Proposed Slope Protection And Edge Protection At Selected Section And No Shoulder On Both Sides. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 88 C.d. 2.16 Contract I.d. No. : 25ed0050 Name Of Contract : Construction Of Drainage Structure, Barangay Tibag – Barangay Pachoca, Calapan City, Oriental Mindoro Location : Calapan City, Oriental Mindoro Scope Of Works : 1. Installation Of 173.50 L.m. Rcpc Drainage Only Size 0.60 M. Dia. At Left Side. 2. Installation Of 45.50 L.m. Rcpc Drainage Size 0.90 M. Dia. With Curb And Gutter At Right Side. 3. Installation Of 240.50 L.m. Rcpc Drainage Only Sized 0.90 M. Dia. At Right Side Only. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 195 C.d. Bidders Should Have Completed A Contract Similar To The Project. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category. The Description Of An Eligible Bidders Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 8:00 Am To 5:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. In View Of The Full Implementation On Assigning Only Qualified And Competent Engineers Of The Contractors And Consultants In The Implementation Of Dpwh Projects, Please Be Reminded Of Department Order No. 98 S. 2016 “limits Of Assignment Of Contractors’/consultants’ Materials Engineers” And Department Order No. 118 S. 2024 “guideline On The Accreditation And Assignment Of Contractor’s And Consultants’ Project Engineers”. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Prospective Bidders May Obtain Further Information From The Department Of Public Works And Highways, Mindoro Oriental District Engineering Office And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 30 – November 21, 2024 From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Contract I.d. Number Amount 25ed0035 Php 5,000.00 25ed0036 Php 5,000.00 25ed0037 Php 5,000.00 25ed0038 Php 5,000.00 25ed0039 Php 5,000.00 25ed0040 Php 25,000.00 25ed0041 Php 50,000.00 25ed0042 Php 50,000.00 25ed0043 Php 50,000.00 25ed0044 Php 5,000.00 25ed0045 Php 5,000.00 25ed0046 Php 5,000.00 25ed0047 Php 5,000.00 25ed0048 Php 5,000.00 25ed0049 Php 5,000.00 25ed0050 Php 5,000.00 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided Thast Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways, Mindoro Oriental District Engineering Office Will Hold A Pre-bid Conference On November 6, 2024 @ 9:30 A.m. At Bidding Room, Dpwh – Modeo, Masipit, Calapan City, Oriental Mindoro And/or Through Video Conferencing Or Webcasting Via Zoom Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_mindorooriental@dpwh.gov.ph For Electronic Submission On Or Before November 21, 2024 @ 10:00 A.m. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On November 21, 2024, Immediately After The Deadline For The Submission Of Bid At Bidding Room, Dpwh – Modeo, Masipit, Calapan City, Oriental Mindoro And/or Through Zoom. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 13. The Department Of Public Works And Highways, Mindoro Oriental District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Engr. Agnes M. Bueno Department Of Public Works And Highways Mindoro Oriental District Engineering Office Masipit, Calapan City, Oriental Mindoro Bueno.agnes@dpwh.gov.ph (043) 288-9365 Albien M. Mahia Bac Chairperson

Details: Description Section Ii. Instructions To Bidders A. General 1. Scope Of Bid 1.1 The Procuring Entity Named In The Bds Invites Bids For The Supply And Delivery Of The Goods As Described In Section Vii. Technical Specifications. 1.2 The Name, Identification, And Number Of Lots Specific To This Bidding Are Provided In The Bds. The Contracting Strategy And Basis Of Evaluation Of Lots Is Described In Itb Clause 28. 2. Source Of Funds The Procuring Entity Has A Budget Or Has Received Funds From The Funding Source Named In The Bds, And In The Amount Indicated In The Bds. It Intends To Apply Part Of The Funds Received For The Project, As Defined In The Bds, To Cover Eligible Payments Under The Contract. 3. Corrupt, Fraudulent, Collusive, And Coercive Practices 3.1 Unless Otherwise Specified In The Bds, The Procuring Entity As Well As The Bidders And Suppliers Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. In Pursuance Of This Policy, The Procuring Entity: (a) Defines, For Purposes Of This Provision, The Terms Set Forth Below As Follows (i) “corrupt Practice” Means Behavior On The Part Of Officials In The Public Or Private Sectors By Which They Improperly And Unlawfully Enrich Themselves, Others, Or Induce Others To Do So, By Misusing The Position In Which They Are Placed, And Includes The Offering, Giving, Receiving, Or Soliciting Of Anything Of Value To Influence The Action Of Any Such Official In The Procurement Process Or In Contract Execution; Entering, On Behalf Of The Government, Into Any Contract Or Transaction Manifestly And Grossly Disadvantageous To The Same, Whether Or Not The Public Officer Profited Or Will Profit Thereby, And Similar Acts As Provided In Ra 3019; (ii) “fraudulent Practice” Means A Misrepresentation Of Facts In Order To Influence A Procurement Process Or The Execution Of A Contract To The Detriment Of The Procuring Entity, And Includes Collusive Practices Among Bidders (prior To Or After Bid Submission) Designed To Establish Bid Prices At Artificial, Non-competitive Levels And To Deprive The Procuring Entity Of The Benefits Of Free And Open Competition. (iii) “collusive Practices” Means A Scheme Or Arrangement Between Two Or More Bidders, With Or Without The Knowledge Of The Procuring Entity, Designed To Establish Bid Prices At Artificial, Non-competitive Levels. (iv) “coercive Practices” Means Harming Or Threatening To Harm, Directly Or Indirectly, Persons, Or Their Property To Influence Their Participation In A Procurement Process, Or Affect The Execution Of A Contract; (v) “obstructive Practice” Is (aa) Deliberately Destroying, Falsifying, Altering Or Concealing Of Evidence Material To An Administrative Proceedings Or Investigation Or Making False Statements To Investigators In Order To Materially Impede An Administrative Proceedings Or Investigation Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Into Allegations Of A Corrupt, Fraudulent, Coercive Or Intimidating Any Party To Prevent It From Disclosing Its Knowledge Of Matters Relevant To The Administrative Proceedings Or Investigation Or From Pursuing Such Proceedings Or Investigation; Or (bb) Acts Intended To Materially Impede The Exercise Of The Inspection And Audit Rights Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Herein. (b) Will Reject A Proposal For Award If It Determines That The Bidder Recommended For Award Has Engaged In Any Of The Practices Mentioned In This Clause For Purposes Of Competing For The Contract. 3.2 Further, The Procuring Entity Will Seek To Impose The Maximum Civil, Administrative, And/or Criminal Penalties Available Under Applicable Laws On Individuals And Organizations Deemed To Be Involved In Any Of The Practices Mentioned In Itb Clause 3.1(a). 3.3 Furthermore, The Funding Source And The Procuring Entity Reserve The Right To Inspect And Audit Records And Accounts Of A Bidder Or Supplier In The Bidding For And Performance Of A Contract Themselves Or Through Independent Auditors As Reflected In The Gcc Clause 3. 4. Conflict Of Interest 4.1 All Bidders Found To Have Conflicting Interests Shall Be Disqualified To Participate In The Procurement At Hand, Without Prejudice To The Imposition Of Appropriate Administrative, Civil, And Criminal Sanctions. A Bidder May Be Considered To Have Conflicting Interests With Another Bidder In Any Of The Events Described In Paragraphs (a) Through (c) Below And A General Conflict Of Interest In Any Of The Circumstances Set Out In Paragraphs (d) Through (f) Below: (a) A Bidder Has Controlling Shareholders In Common With Another Bidder; (b) A Bidder Receives Or Has Received Any Direct Or Indirect Subsidy From Any Other Bidder; (c) A Bidder Has The Same Legal Representative As That Of Another Bidder For Purposes Of This Bid; (d) A Bidder Has A Relationship, Directly Or Through Third Parties, That Puts Them In A Position To Have Access To Information About Or Influence On The Bid Of Another Bidder Or Influence The Decisions Of The Procuring Entity Regarding This Bidding Process. This Will Include A Firm Or An Organization Who Lends, Or Temporarily Seconds, Its Personnel To Firms Or Organizations Which Are Engaged In Consulting Services For The Preparation Related To Procurement For Or Implementation Of The Project If The Personnel Would Be Involved In Any Capacity On The Same Project; (e) A Bidder Submits More Than One Bid In This Bidding Process. However, This Does Not Limit The Participation Of Subcontractors In More Than One Bid; Or (f) (g) A Bidder Who Participated As A Consultant In The Preparation Of The Design Or Technical Specifications Of The Goods And Related Services That Are The Subject Of The Bid. A Bidder Who Lends, Or Temporarily Seconds, Its Personnel To Firms Or Organizations Which Are Engaged In Consulting Services For The Preparation Related To Procurement Or Implementation Of The Project, If The Personnel Would Be Involved In Any Capacity On The Same Project. 4.2 In Accordance With Section 47 Of The Irr Of Ra 9184, All Bidding Documents Shall Be Accompanied By A Sworn Affidavit Of The Bidder That It Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), Members Of The Technical Working Group (twg), Members Of The Bac Secretariat, The Head Of The Project Management Office (pmo) Or The End-user Unit, And The Project Consultants, By Consanguinity Or Affinity Up To The Third Civil Degree. On The Part Of The Bidder, This Clause Shall Apply To The Following Persons: (a) If The Bidder Is An Individual Or A Sole Proprietorship, To The Bidder Himself; (b) If The Bidder Is A Partnership, To All Its Officers And Members; (c) (d) If The Bidder Is A Corporation, To All Its Officers, Directors, And Controlling Stockholders; And If The Bidder Is A Cooperative, To All Its Officers, Directors And Controlling Share Holders Or Members; And (e) If The Bidder Is A Joint Venture (jv), The Provisions Of Items (a), (b), Or (c) Of This Clause Shall Correspondingly Apply To Each Of The Members Of The Said Jv, As May Be Appropriate Relationship Of The Nature Described Above Or Failure To Comply With This Clause Will Result In The Automatic Disqualification Of A Bidder. 5. Eligible Bidders 5.1 Unless Otherwise Indicated In The Bds, The Following Persons Shall Be Eligible To Participate In This Bidding: (a) Duly Licensed Filipino Citizens/sole Proprietorships; (b) Partnerships Duly Organized Under The Laws Of The Philippines And Of Which At Least Sixty Percent (60%) Of The Interest Belongs To Citizens Of The Philippines; (c) Corporations Duly Organized Under The Laws Of The Philippines, And Of Which At Least Sixty Percent (60%) Of The Outstanding Capital Stock Belongs To Citizens Of The Philippines; (d) Cooperatives Duly Organized Under The Laws Of The Philippines, And Of Which At Least Sixty Percent (60%) Of The Interest Belongs To Citizens Of The Philippines; And (e) Persons/entities Forming Themselves Into A Jv, I.e., A Group Of Two (2) Or More Persons/entities That Intend To Be Jointly And Severally Responsible Or Liable For A Particular Contract: Provided, However, That Filipino Ownership Or Interest Of The Joint Venture Concerned Shall Be At Least Sixty Percent (60%). 5.2 Foreign Bidders May Be Eligible To Participate When Any Of The Following Circumstances Exist, As Specified In The Bds. (a) When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra 9184 And Its Irr Allow Foreign Bidders To Participate; (b) Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; (c) When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or (d) When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3 Government Owned Or Controlled Corporations (goccs) May Be Eligible To Participate Only If They Can Establish That They (a) Are Legally And Financially Autonomous, (b) Operate Under Commercial Law, And (c) Are Not Attached Agencies Of The Procuring Entity. 5.4 Unless Otherwise Provided In The Bds, The Bidder Must Have Completed A Single Largest Completed Contract (slcc) Similar To The Project The Value Of Which, Adjusted If Necessary, By The Bidder To Current Prices Using The Philippine Statistics Authority (psa) Consumer Price Index, Must Be At Least Equivalent To A Percentage Of The Abc Stated In The Bds. For This Purpose, Contracts Similar To The Project Shall Be Those Described In The Bds, And Completed Within The Relevant Period Stated In The Invitation To Bid And Itb Clause 12.1(a)(ii). 5.5 Unless Otherwise Provided In The Bds, The Bidder Must Submit A Computation Of Its Net Financial Contracting Capacity (nfcc) Which Must Be At Least Equal To The Abc To Be Bid, Calculated As Follows: Nfcc = [(current Assets Minus Current Liabilities) (k)] Minus The Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Ongoing Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract To Be Bid. Where: K = 15 The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Latest Audited Financial Statements Submitted To The Bir, Through Its Electronic Filling And Payment System (efps). If The Prospective Bidder Opts To Submit A Committed Line Of Credit (clc), It Must Be At Least Equal To Ten Percent (10%) Of The Abc To Be Bid And Issued By A Universal Or Commercial Bank. 6. Bidders Responsibilities 6.1 The Bidder Or Its Duly Authorized Representative Shall Submit A Sworn Statement In The Form Prescribed In Section Viii – Bidding Forms As Required In Itb Clause 12.1(b)(iv). 6.2 The Bidder Is Responsible For The Following: (a) Having Taken Steps To Carefully Examine All Of The Bidding Documents; (b) Having Acknowledged All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; (c) Having Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And (d) Having Complied With Its Responsibility To Inquire Or Secure Supplemental/bid Bulletin(s) As Provided Under Itb Clause 10.4; (e) Ensuring That It Is Not “blacklisted” Or Barred From Bidding By The Gop Or Any Of Its Agencies, Offices, Corporations, Or Lgus, Including Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Gppb, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting. (f) Ensuring That Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; (g) Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative/s To Verify All The Documents Submitted; (h) Ensuring That The Signatory Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary And/or To Represent The Bidder In The Bidding, With The Duly Notarized Secretary’s Certificate Attesting To Such Fact, If The Bidder Is A Corporation, Partnership, Cooperative, Or Joint Venture; (i) Complying With The Disclosure Provision Under Section 47 Of Ra 9184 In Relation To Other Provisions Of Ra 3019; And (j) (k) (l) Complying With Existing Labor Laws And Standards, In The Case Of Procurement Of Services Ensuring That It Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Of Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. Failure To Observe Any Of The Above Responsibilities Shall Be At The Risk Of The Bidder Concerned. 6.3 The Bidder Is Expected To Examine All Instructions, Forms, Terms, And Specifications In The Bidding Documents. Unless Otherwise Indicated In The Bds, Failure To Furnish All Information Or Documentation Required In The Bidding Documents Shall Result In The Rejection Of The Bid And The Disqualification Of The Bidder. 6.4 It Shall Be The Sole Responsibility Of The Bidder To Determine And To Satisfy Itself By Such Means As It Considers Necessary Or Desirable As To All Matters Pertaining To The Contract To Be Bid, Including: (a) The Location And The Nature Of This Project; (b) Climatic Conditions; (c) Transportation Facilities; And (d) Other Factors That May Affect The Cost, Duration, And Execution Or Implementation Of This Project. 6.5 The Procuring Entity Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Or Conclusions By The Prospective Or Eligible Bidder Out Of The Data Furnished By The Procuring Entity. However, The Procuring Entity Shall Ensure That All Information In The Bidding Documents, Including Bid/supplemental Bid Bulletin/s Issued, Are Correct And Consistent. 6.6 The Bidder Shall Bear All Costs Associated With The Preparation And Submission Of His Bid, And The Procuring Entity Will In No Case Be Responsible Or Liable For Those Costs, Regardless Of The Conduct Or Outcome Of The Bidding Process. 6.7 Before Submitting Their Bids, The Bidder Is Deemed To Have Become Familiar With All Existing Laws, Decrees, Ordinances, Acts And Regulations Of The Philippines Which May Affect This Project In Any Way. 6.8 The Bidder Should Note That The Procuring Entity Will Accept Bids Only From Those That Have Paid The Non-refundable Fee For The Bidding Documents At The Office Indicated In The Invitation To Bid. 7. Origin Of Goods And Services Unless Otherwise Indicated In The Bds, There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The United Nations Security Council Taken Under Chapter Vii Of The Charter Of The United Nations, Subject To Itb Clause 27.1. 8. Subcontracts 8.1 Unless Otherwise Specified In The Bds, The Bidder May Subcontract Portions Of The Goods To An Extent As May Be Approved By The Procuring Entity And Stated In The Bds. However, Subcontracting Of Any Portion Shall Not Relieve The Bidder From Any Liability Or Obligation That May Arise From The Contract For This Project. 8.2 Subcontractors Must Comply With The Eligibility Criteria And The Documentary Requirements Specified In The Bds. In The Event That Any Subcontractor Is Found By The Procuring Entity To Be Ineligible, The Subcontracting Of Such Portion Of The Goods Shall Be Disallowed. 8.3 The Bidder May Identify The Subcontractor To Whom A Portion Of The Goods Will Be Subcontracted At Any Stage Of The Bidding Process Or During Contract Implementation. If The Bidder Opts To Disclose The Name Of The Subcontractor During Bid Submission, The Bidder Shall Include The Required Documents As Part Of The Technical Component Of Its Bid. B. Contents Of The Bidding Documents 9. Pre-bid Conference 9.1 If So Specified In The Bds, A Pre-bid Conference Shall Be Held At The Venue And On The Date Indicated Therein, To Clarify And Address The Bidders’ Questions On The Technical And Financial Components Of This Project. 9.2 Bidders Are Encouraged To Attend The Pre-bid Conference To Ensure That They Fully Understand The Procuring Entity’s Requirements. Non-attendance Of The Bidder Will In No Way Prejudice Its Bid; However, The Bidder Is Expected To Know The Changes And/or Amendments To The Bidding Documents Discussed During The Pre-bid Conference. 9.3 Any Statement Made At The Pre-bid Conference Shall Not Modify The Terms Of The Bidding Documents Unless Such Statement Is Specifically Identified In Writing As An Amendment Thereto And Issued As A Supplemental/bid Bulletin. 10. Clarification And Amendment Of Bidding Documents 10.1 Bidders Who Have Purchased The Bidding Documents May Request For Clarifications On Any Part Of The Bidding Documents For An Interpretation. Such A Request Must Be In Writing And Submitted To The Procuring Entity At The Address Indicated In The Bds At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10.2 Supplemental/bid Bulletins May Be Issued Upon The Procuring Entity’s Initiative For Purposes Of Clarifying Or Modifying Any Provision Of The Bidding Documents Not Later Than Seven (7) Calendar Days Before The Deadline For The Submission And Receipt Of Bids. Any Modification To The Bidding Documents Shall Be Identified As An Amendment. 10.3 Any Supplemental/bid Bulletin Issued By The Bac Shall Also Be Posted On The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity Concerned, If Available. It Shall Be The Responsibility Of All Bidders Who Secure The Bidding Documents To Inquire And Secure Supplemental/bid Bulletins That May Be Issued By The Bac. However, Bidders Who Have Submitted Bids Before The Issuance Of The Supplemental/bid Bulletin Must Be Informed And Allowed To Modify Or Withdraw Their Bids In Accordance With Itb Clause 23. C. Preparation Of Bids 11. Language Of Bids The Bid, As Well As All Correspondence And Documents Relating To The Bid Exchanged By The Bidder And The Procuring Entity, Shall Be Written In English. Supporting Documents And Printed Literature Furnished By The Bidder May Be In Another Language Provided They Are Accompanied By An Accurate Translation In English Certified By The Appropriate Embassy Or Consulate In The Philippines, In Which Case The English Translation Shall Govern For Purposes Of Interpretation Of The Bid. 12. Documents Comprising The Bid: Eligibility And Technical Components. 12.1 Unless Otherwise Indicated In The Bds, The First Envelope Shall Contain The Following Eligibility And Technical Documents: (a) Eligibility Documents - Class "a" Documents: (i) Philgeps Platinum Certificate Of Registration And Membership With Annex A In Accordance With Section 8.5.2 Of The Irr. (ii) Statement Of All Its Ongoing Government And Private Contracts Within The Period Stated In The Bds, Including Contracts Awarded But Not Yet Started, If Any. Statement Of The Bidder's Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, In Accordance With Itb Clause 5.4, Within The Relevant Period As Provided In The Bds. The Two Statements Required Shall Indicate For Each Contract The Following: (ii.1) Name Of The Contract; (ii.2) Date Of The Contract; (ii.3) Contract Duration; (ii.4) Owner's Name And Address; (ii.5) Kinds Of Goods; (ii.6) (ii.7) (ii.8) (ii.9) For Statement Of Ongoing Contracts- Amount Of Contract And Value Of Outstanding Contracts; For Statement Of Slcc-amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa's Consumer Price Index, If Necessary For The Purpose Of Meeting The Slcc Requirement; Date Of Delivery; And End User's Acceptance Or Official Receipt(s) Or Sales Invoice Issued For The Contract, If Completed, Which Shall Be Attached To The Statements. (iii) The Prospective Bidder’s Computation Of Its Net Financial Contracting Capacity (nfcc) Which Must Be At Least Equal To The Abc To Be Bid, Calculated As Follows: Nfcc = [(current Assets Minus Current Liabilities) (k)] Minus The Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Ongoing Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract To Be Bid. Where: K = 15 The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Data Submitted To The Bir, Through Its Electronic Filling And Payment System (efps). Or A Committed Line Of Credit From A Universal Or Commercial Bank (not Applicable To Procurement Of Infrastructure Projects) Class "b" Document: (iv) If Applicable, The Jva In Case The Joint Venture Is Already In Existence, Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. (b) Technical Documents - (i) Bid Security In Accordance With Itb Clause 18. If The Procuring Entity Requires The Bidders To Submit The Bid Security In The Form Of: (i.1) Cash Or Cashier’s/ Manager’s Check, Issued By A Universal Or Commercial Bank; Or (i.2) A Bank Draft/guarantee Or An Irrevocable Letter Of Credit Issued By A Universal/ Commercial Bank, It Shall Be Accompanied By A Confirmation From A Universal Or Commercial Bank, If Issued By A Foreign Bank; Or (i.3) (i.4) A Surety Bond Accompanied By A Certification Coming From An Authorized Insurance Commission That A Surety Or Insurance Company Is Authorized To Issue Such Instrument; Bid Securing Declaration (ii) (iii) Statement Of Compliance To The Schedule Of Requirements Conformity With Technical Specifications, As Enumerated And Specified In Sections Vi And Vii Of The Bidding Documents; And (iv) Sworn Statement In Accordance With Section 25.2(a)(iv) Of The Irr Of Ra 9184 And Using The Form Prescribed In Section Viii – Bidding Forms. 13. Documents Comprising The Bid: Financial Component 13.1 Unless Otherwise Stated In The Bds, The Financial Component Of The Bid Shall Contain The Following: (a) Financial Bid Form, Which Includes Bid Prices And The Bill Of Quantities And The Applicable Price Schedules, In Accordance With Itb Clauses 15.1 And 15.4; (b) If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From The Dti, Sec, Or Cda Issued In Accordance With Itb Clause 27; And (c) Any Other Document Required In The Bds 13.2 Unless Otherwise Stated In The Bds, All Bids That Exceed The Abc Shall Not Be Accepted. 14. Alternative Bids Alternative Bids Shall Be Rejected. For This Purpose, Alternative Bid Is An Offer Made By A Bidder In Addition Or As A Substitute To Its Original Bid Which May Be Included As Part Of Its Original Bid Or Submitted Separately Therewith For Purposes Of Bidding. A Bid With Options Is Considered An Alternative Bid Regardless Of Whether Said Bid Proposal Is Contained In A Single Envelope Or Submitted In Two (2) Or More Separate Bid Envelopes. 15. Bid Prices 15.1 The Bidder Shall Complete The Appropriate Price Schedules Included Herein, Stating The Unit Prices, Total Price Per Item, The Total Amount And The Expected Countries Of Origin Of The Goods To Be Supplied Under This Project. 15.2 The Bidder Shall Fill In Rates And Prices For All Items Of The Goods Described In The Bill Of Quantities. Bids Not Addressing Or Providing All Of The Required Items In The Bidding Documents Including, Where Applicable, Bill Of Quantities, Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. In This Regard, Where A Required Item Is Provided, But No Price Is Indicated, The Same Shall Be Considered As Non-responsive, But Specifying A "0" (zero) Or A Dash (-) For The Said Item Would Mean That It Is Being Offered For Free To The Government. 15.3 The Terms Ex Works (exw), Cost, Insurance And Freight (cif), Cost And Insurance Paid To (cip), Delivered Duty Paid (ddp), And Other Trade Terms Used To Describe The Obligations Of The Parties, Shall Be Governed By The Rules Prescribed In The Current Edition Of The International Commercial Terms (incoterms) Published By The International Chamber Of Commerce, Paris. 15.4 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: (a) For Goods Offered From Within The Procuring Entity’s Country (i) The Price Of The Goods Quoted Exw (ex Works, Ex Factory, Ex Warehouse, Ex Showroom, Or Off-the-shelf, As Applicable), Including All Customs Duties And Sales And Other Taxes Already Paid Or Payable (i.1) On The Components And Raw Material Used In The Manufacture Or Assembly Of Goods Quoted Ex Works Or Ex Factory; Or (i.2) On The Previously Imported Goods Of Foreign Origin Quoted Ex Warehouse, Ex Showroom, Or Off-the-shelf And Any Procuring Entity Country Sales And Other Taxes Which Will Be Payable On The Goods If The Contract Is Awarded. (ii) The Price For Inland Transportation, Insurance, And Other Local Costs Incidental To Delivery Of The Goods To Their Final Destination. (iii) The Price Of Other (incidental) Services, If Any, Listed In The Bds. (b) For Goods Offered From Abroad: (i) Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Ddp With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. (ii) The Price Of Other (incidental) Services, If Any, Listed In The Bds 15.5 Prices Quoted By The Bidder Shall Be Fixed During The Bidder’s Performance Of The Contract And Not Subject To Variation Or Price Escalation On Any Account, Unless Otherwise Specified In The Bds. A Bid Submitted With An Adjustable Price Quotation Shall Be Treated As Non-responsive And Shall Be Rejected, Pursuant To Itb Clause 24. 15.6 All Bid Prices Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Indicated In The Bds And Specified In The Gcc And Its Corresponding Scc Provision. 16. Bid Currencies 16.1 Prices Shall Be Quoted In The Following Currencies: (a) For Goods That The Bidder Will Supply From Within The Philippines, The Prices Shall Be Quoted In Philippine Pesos. (b) For Goods That The Bidder Will Supply From Outside The Philippines, The Prices May Be Quoted In The Currency(ies) Stated In The Bds. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 16.2 If So Allowed In Accordance With Itb Clause 16.1, The Procuring Entity For Purposes Of Bid Evaluation And Comparing The Bid Prices Will Convert The Amounts In Various Currencies In Which The Bid Price Is Expressed To Philippine Pesos At The Foregoing Exchange Rates. 16.3 Unless Otherwise Specified In The Bds, Payment Of The Contract Price Shall Be Made In Philippine Pesos. 17. Bid Validity 17.1 Bids Shall Remain Valid For The Period Specified In The Bds Which Shall Not Exceed One Hundred Twenty (120) Calendar Days From The Date Of The Opening Of Bids. 17.2 In Exceptional Circumstances, Prior To The Expiration Of The Bid Validity Period, The Procuring Entity May Request Bidders To Extend The Period Of Validity Of Their Bids. The Request And The Responses Shall Be Made In Writing. The Bid Security Described In Itb Clause 18 Should Also Be Extended Corresponding To The Extension Of The Bid Validity Period At The Least. A Bidder May Refuse The Request Without Forfeiting Its Bid Security, But His Bid Shall No Longer Be Considered For Further Evaluation And Award. A Bidder Granting The Request Shall Not Be Required Or Permitted To Modify Its Bid. 18. Bid Security 18.1 The Procuring Entity Shall Prescribe In The Bds The Acceptable Forms Of Bid Security That Bidders May Opt To Use, Which Shall Include The Bid Securing Declaration (bsd) Or Any Other Form Of Bid Security And The Amount Of Which Shall Be Equal To A Percentage Of The Abc In Accordance With The Following Schedule: Form Of Bid Security Amount Of Bid Security (not Less Than The Percentage Of The Abc) (a) Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank Two Percent (2%) (b) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank (c) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Five Percent (5%) For Biddings Conducted By Lgus, The Procuring Entity May Also Require Bidders To Submit Bid Securities In The Form Of Cashier’s/manager’s Check, Bank Draft/guarantee, Or Irrevocable Letter Of Credit From Other Banks Certified By The Bsp As Authorized To Issue Such Financial Statement. The Bid Securing Declaration Mentioned Above Is An Undertaking Which States, Among Others, That The Bidder Shall Enter Into Contract With The Procuring Entity And Furnish The Performance Security Required Under Itb Clause 33.2, From Receipt Of The Notice Of Award, And Committing To Pay The Corresponding Fine, And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event It Violates Any Of The Conditions Stated Therein As Provided In The Guidelines Issued By The Gppb. 18.2 The Bid Security Should Be Valid For The Period Specified In The Bds. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 18.3 No Bid Securities Shall Be Returned To Bidders After The Opening Of Bids And Before Contract Signing, Except To Those That Failed Or Declared As Post-disqualified, Upon Submission Of A Written Waiver Of Their Right To File A Motion For Reconsideration And/or Protest. Without Prejudice On Its Forfeiture, Bid Securities Shall Be Returned Only After The Bidder With The Lowest Calculated And Responsive Bid Has Signed The Contract And Furnished The Performance Security, But In No Case Later Than The Expiration Of The Bid Security Validity Period Indicated In Itb Clause 18.2. 18.4 Upon Signing And Execution Of The Contract Pursuant To Itb Clause 32, And The Posting Of The Performance Security Pursuant To Itb Clause 33, The Successful Bidder’s Bid Security Will Be Discharged, But In No Case Later Than The Bid Security Validity Period As Indicated In The Itb Clause 18.2. 18.5 The Bid Security May Be Forfeited: (a) If A Bidder: (i) Withdraws Its Bid During The Period Of Bid Validity Specified In Itb Clause 17; (ii) Does Not Accept The Correction Of Errors Pursuant To Itb Clause 28.3(b); (iii) Fails To Submit The Requirements Within The Prescribed Period, Or A Finding Against Their Veracity, As Stated In Itb Clause 29.2; Or (iv) Any Other Reason Stated In The Bds. (b) If The Successful Bidder: (i) Fails To Sign The Contract In Accordance With Itb Clause 32; (ii) Fails To Furnish Performance Security In Accordance With Itb Clause 33; Or (iii) Any Other Reason Stated In The Bds. 19. Format And Signing Of Bids 19.1 Bidders Shall Submit Their Bids Through Their Duly Authorized Representative Using The Appropriate Forms Provided In Section Viii – Bidding Forms On Or Before The Deadline Specified In The Itb Clauses 21 In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously. The First Shall Contain The Technical Component Of The Bid, Including The Eligibility Requirements Under Itb Clause 12.1, And The Second Shall Contain The Financial Component Of The Bid. 19.2 Forms As Mentioned In Itb Clause 19.1 Must Be Completed Without Any Alterations To Their Format, And No Substitute Form Shall Be Accepted. All Blank Spaces Shall Be Filled In With The Information Requested 19.3 The Bidder Shall Prepare And Submit An Original Of The First And Second Envelopes As Described In Itb Clauses 12 And 13. In Addition, The Bidder Shall Submit Copies Of The First And Second Envelopes. In The Event Of Any Discrepancy Between The Original And The Machine Copies, The Original Shall Prevail. 19.4 Each And Every Page Of The Bid Form, Including The Schedule Of Prices, Under Section Viii Hereof, Shall Be Signed By The Duly Authorized Representative/s Of The Bidder. Failure To Do So Shall Be A Ground For The Rejection Of The Bid. 19.5 Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder. 20. Sealing And Marking Of Bids 20.1 Unless Otherwise Indicated In The Bds, Bidders Shall Enclose Their Original Eligibility And Technical Documents Described In Itb Clause 12in One Sealed Envelope Marked “original - Technical Component”, And The Original Of Their Financial Component In Another Sealed Envelope Marked “original - Financial Component”, Sealing Them All In An Outer Envelope Marked “original Bid”. 20.2 Each Copy Of The First And Second Envelopes Shall Be Similarly Sealed Duly Marking The Inner Envelopes As “copy No. ___ - Technical Component” And “copy No. ___ – Financial Component” And The Outer Envelope As “copy No. ___”, Respectively. These Envelopes Containing The Original And The Copies Shall Then Be Enclosed In One Single Envelope. 20.3 The Original And The Number Of Copies Of The Bid As Indicated In The Bds Shall Be Typed Or Computerized In Indelible Ink And Shall Be Signed By The Bidder Or Its Duly Authorized Representative/s. 20.4 All Envelopes Shall (a) Contain The Name Of The Contract To Be Bid In Capital Letters; (b) Bear The Name And Address Of The Bidder In Capital Letters; (c) Be Addressed To The Procuring Entity’s Bac Identified In Itb Clause 1.1, (d) Bear The Specific Identification Of This Bidding Process Indicated In The Itb Clause 1.2; And (e) Bear A Warning “do Not Open Before…” The Date And Time For The Opening Of Bids, In Accordance With Itb Clause 21. 20.5 Bid Envelopes That Are Not Properly Sealed And Marked As Required In The Bidding Documents, Shall Not Be Rejected, But The Bidder Or Its Duly Authorized Representative Shall Acknowledge Such Condition Of The Bid As Submitted. The Bac Or The Procuring Entity Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or For Its Premature Opening. D. Submission And Opening Of Bids 21. Deadline For Submission Of Bids Bids Must Be Received By The Procuring Entity’s Bac At The Address And On Or Before The Date And Time Indicated In The Bds. 22. Late Bids Any Bid Submitted After The Deadline For Submission And Receipt Of Bids Prescribed By The Procuring Entity, Pursuant To Itb Clause 21, Shall Be Declared “late” And Shall Not Be Accepted By The Procuring Entity 23. Modification And Withdrawal Of Bids 23.1 The Bidder May Modify Its Bid After It Has Been Submitted; Provided That The Modification Is Received By The Procuring Entity Prior To The Deadline Prescribed For Submission And Receipt Of Bids. The Bidder Shall Not Be Allowed To Retrieve Its Original Bid, But Shall Be Allowed To Submit Another Bid Equally Sealed, Properly Identified, Linked To Its Original Bid Marked As “technical Modification” Or “financial Modification” And Stamped “received” By The Bac. Bid Modifications Received After The Applicable Deadline Shall Not Be Considered And Shall Be Returned To The Bidder Unopened. 23.2 A Bidder May, Through A Letter Of Withdrawal, Withdraw Its Bid After It Has Been Submitted, For Valid And Justifiable Reason; Provided That The Letter Of Withdrawal Is Received By The Procuring Entity Prior To The Deadline Prescribed For Submission And Receipt Of Bids. The Letter Of Withdrawal Must Be Executed By The Duly Authorized Representative Of The Bidder Identified In The Omnibus Sworn Statement, A Copy Of Which Should Be Attached To The Letter. 23.3 Bids Requested To Be Withdrawn In Accordance With Itb Clause 23.1 Shall Be Returned Unopened To The Bidders. A Bidder May Also Express Its Intention Not To Participate In The Bidding Through A Letter Which Should Reach And Be Stamped By The Bac Before The Deadline For Submission And Receipt Of Bids. A Bidder That Withdraws Its Bid Shall Not Be Permitted To Submit Another Bid, Directly Or Indirectly, For The Same Contract. 23.4 No Bid May Be Modified After The Deadline For Submission Of Bids. No Bid May Be Withdrawn In The Interval Between The Deadline For Submission Of Bids And The Expiration Of The Period Of Bid Validity Specified By The Bidder On The Financial Bid Form. Withdrawal Of A Bid During This Interval Shall Result In The Forfeiture Of The Bidder’s Bid Security, Pursuant To Itb Clause 18.5, And The Imposition Of Administrative, Civil And Criminal Sanctions As Prescribed By Ra 9184 And Its Irr 24. Opening And Preliminary Examination Of Bids 24.1 24.2 The Bac Shall Open The Bids In Public, Immediately After The Deadline For The Submission And Receipt Of Bids, As Specified In The Bds. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Bac Shall Take Custody Of The Bids Submitted And Reschedule The Opening Of Bids On The Next Working Day Or At The Soonest Possible Time Through The Issuance Of A Notice Of Postponement To Be Posted In The Philgeps Website Of The Procuring Entity Concerned, If Available. The Bac Shall Open The First Bid Envelopes Of Bidders In Public As Specified In The Bds To Determine Each Bidder’s Compliance With The Documents Prescribed In Itb Clause 12. For This Purpose, The Bac Shall Check The Submitted Documents Of Each Bidder Against A Checklist Of Required Documents To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion. If A Bidder Submits The Required Document, It Shall Be Rated “passed” For That Particular Requirement. In This Regard, Bids That Fail To Include Any Requirement Or Are Incomplete Or Patently Insufficient Shall Be Considered As “failed”. Otherwise, The Bac Shall Rate The Said First Bid Envelope As “passed”. 24.3 Immediately After Determining Compliance With The Requirements In The First Envelope, The Bac Shall Forthwith Open The Second Bid Envelope Of Each Remaining Eligible Bidder Whose First Bid Envelope Was Rated “passed”. The Second Envelope Of Each Complying Bidder Shall Be Opened Within The Same Day. In Case One Or More Of The Requirements In The Second Envelope Of A Particular Bid Is Missing, Incomplete Or Patently Insufficient, And/or If The Submitted Total Bid Price Exceeds The Abc Unless Otherwise Provided In Itb Clause 13.2, The Bac Shall Rate The Bid Concerned As “failed”. Only Bids That Are Determined To Contain All The Bid Requirements For Both Components Shall Be Rated “passed” And Shall Immediately Be Considered For Evaluation And Comparison 24.4 Letters Of Withdrawal Shall Be Read Out And Recorded During Bid Opening, And The Envelope Containing The Corresponding Withdrawn Bid Shall Be Returned To The Bidder Unopened. If The Withdrawing Bidder’s Representative Is In Attendance, The Original Bid And All Copies Thereof Shall Be Returned To The Representative During The Bid Opening. If The Representative Is Not In Attendance, The Bid Shall Be Returned Unopened By Registered Mail. The Bidder May Withdraw Its Bid Prior To The Deadline For The Submission And Receipt Of Bids, Provided That The Corresponding Letter Of Withdrawal Contains A Valid Authorization Requesting For Such Withdrawal, Subject To Appropriate Administrative Sanctions 24.5 If A Bidder Has Previously Secured A Certification From The Procuring Entity To The Effect That It Has Previously Submitted The Above-enumerated Class “a” Documents, The Said Certification May Be Submitted In Lieu Of The Requirements Enumerated In Itb Clause 12.1(a), Items (i) To (v). 24.6 In The Case Of An Eligible Foreign Bidder As Described In Itb Clause 5, The Class “a” Documents Described In Itb Clause 12.1(a) May Be Substituted With The Appropriate Equivalent Documents, If Any, Issued By The Country Of The Foreign Bidder Concerned. 24.7 Each Partner Of A Joint Venture Agreement Shall Likewise Submit The Requirements In Itb Clauses 12.1(a)(i) And 12.1(a)(ii). Submission Of Documents Required Under Itb Clauses 12.1(a)(iii) To 12.1(a)(v) By Any Of The Joint Venture Partners Constitutes Compliance. 24.8 The Procuring Entity Shall Prepare The Minutes Of The Proceedings Of The Bid Opening That Shall Include, As A Minimum: (a) Names Of Bidders, Their Bid Price, Bid Security, Findings Of Preliminary Examination; And (b) Attendance Sheet. The Bac Members Shall Sign The Abstract Of Bids As Read. E. Evaluation And Comparison Of Bids 25. Process To Be Confidential 25.1 Members Of The Bac, Including Its Staff And Personnel, As Well As Its Secretariat And Twg, Are Prohibited From Making Or Accepting Any Kind Of Communication With Any Bidder Regarding The Evaluation Of Their Bids Until The Issuance Of The Notice Of Award, Unless Otherwise Allowed In The Bds Or In The Case Of Itb Clause 26. 25.2 Any Effort By A Bidder To Influence The Procuring Entity In The Procuring Entity’s Decision In Respect Of Bid Evaluation, Bid Comparison Or Contract Award Will Result In The Rejection Of The Bidder’s Bid. 26. Clarification Of Bids To Assist In The Evaluation, Comparison, And Post-qualification Of The Bids, The Procuring Entity May Ask In Writing Any Bidder For A Clarification Of Its Bid. All Responses To Requests For Clarification Shall Be In Writing. Any Clarification Submitted By A Bidder In Respect To Its Bid And That Is Not In Response To A Request By The Procuring Entity Shall Not Be Considered. 27. Domestic Preference 27.1 Unless Otherwise Stated In The Bds, The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With The Following: (a) The Preference Shall Be Applied When (i) The Lowest Foreign Bid Is Lower Than The Lowest Bid Offered By A Domestic Bidder, Or (ii) The Lowest Bid Offered By A Non-philippine National Is Lower Than The Lowest Bid Offered By A Domestic Entity. (b) For Evaluation Purposes, The Lowest Foreign Bid Or The Bid Offered By A Non-philippine National Shall Be Increased By Fifteen Percent (15%). (c) In The Event That (i) The Lowest Bid Offered By A Domestic Entity Does Not Exceed The Lowest Foreign Bid As Increased, Or (ii) The Lowest Bid Offered By A Non-philippine National As Increased, Then The Procuring Entity Shall Award The Contract To The Domestic Bidder/entity At The Amount Of The Lowest Foreign Bid Or The Bid Offered By A Non-philippine National, As The Case May Be. (d) If The Domestic Entity/bidder Refuses To Accept The Award Of Contract At The Amount Of The Foreign Bid Or Bid Offered By A Non-philippine National Within Two (2) Calendar Days From Receipt Of Written Advice From The Bac, The Procuring Entity Shall Award To The Bidder Offering The Foreign Bid Or The Non-philippine National, As The Case May Be, Subject To Post-qualification And Submission Of All The Documentary Requirements Under These Bidding Documents. 27.2 A Bidder May Be Granted Preference As A Domestic Entity Subject To The Certification From The Dti (in Case Of Sole Proprietorships), Sec (in Case Of Partnerships And Corporations), Or Cda (in Case Of Cooperatives) That The (a) Sole Proprietor Is A Citizen Of The Philippines Or The Partnership, Corporation, Cooperative, Or Association Is Duly Organized Under The Laws Of The Philippines With At Least Seventy Five Percent (75%) Of Its Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, (b) Habitually Established In Business And Habitually Engaged In The Manufacture Or Sale Of The Merchandise Covered By His Bid, And (c) The Business Has Been In Existence For At Least Five (5) Consecutive Years Prior To The Advertisement And/or Posting Of The Invitation To Bid For This Project. 27.3 A Bidder May Be Granted Preference As A Domestic Bidder Subject To The Certification From The Dti That The Bidder Is Offering Unmanufactured Articles, Materials Or Supplies Of The Growth Or Production Of The Philippines, Or Manufactured Articles, Materials, Or Supplies Manufactured Or To Be Manufactured In The Philippines Substantially From Articles, Materials, Or Supplies Of The Growth, Production, Or Manufacture, As The Case May Be, Of The Philippines. 28. Detailed Evaluation And Comparison Of Bids 28.1 The Procuring Entity Will Undertake The Detailed Evaluation And Comparison Of Bids Which Have Passed The Opening And Preliminary Examination Of Bids, Pursuant To Itb Clause 24, In Order To Determine The Lowest Calculated Bid. 28.2 The Lowest Calculated Bid Shall Be Determined In Two Steps. (a) The Detailed Evaluation Of The Financial Component Of The Bids, To Establish The Correct Calculated Prices Of The Bids; And (b) The Ranking Of The Total Bid Prices As So Calculated From The Lowest To The Highest. The Bid With The Lowest Price Shall Be Identified As The Lowest Calculated Bid. 28.3 The Procuring Entity's Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. Unless Otherwise Specified In The Bds, The Bac Shall Consider The Following In The Evaluation Of Bids. (a) Completeness Of The Bid. Unless The Itb Specifically Allows Partial Bids, Bids Not Addressing Or Providing All Of The Required Items In The Schedule Of Requirements Including, Where Applicable, Bill Of Quantities, Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. In This Regard, Where A Required Item Is Provided, But No Price Is Indicated, The Same Shall Be Considered As Non-responsive, But Specifying A "0" (zero) Or A Dash (-) For The Said Item Would Mean That It Is Being Offered For Free To The Procuring Entity; And (b) Arithmetical Corrections. Consider Computational Errors And Omissions To Enable Proper Comparison Of All Eligible Bids. It May Also Consider Bid Modifications, If Allowed In The Bds. Any Adjustment Shall Be Calculated In Monetary Terms To Determine The Calculated Prices. 28.4 Based On The Detailed Evaluation Of Bids, Those That Comply With The Above-mentioned Requirements Shall Be Ranked In The Ascending Order Of Their Total Calculated Bid Prices, As Evaluated And Corrected For Computational Errors, Discounts And Other Modifications, To Identify The Lowest Calculated Bid. Total Calculated Bid Prices, As Evaluated And Corrected For Computational Errors, Discounts And Other Modifications, Which Exceed The Abc Shall Not Be Considered. 28.5 Unless Otherwise Indicated In The Bds, The Procuring Entity’s Evaluation Of Bids Shall Only Be Based On The Bid Price Quoted In The Financial Bid Form. 28.6 Bids Shall Be Evaluated On An Equal Footing To Ensure Fair Competition. For This Purpose, All Bidders Shall Be Required To Include In Their Bids The Cost Of All Taxes, Such As, But Not Limited To, Value Added Tax (vat), Income Tax, Local Taxes, And Other Fiscal Levies And Duties Which Shall Be Itemized In The Bid Form And Reflected In The Detailed Estimates. Such Bids, Including Said Taxes, Shall Be The Basis For Bid Evaluation And Comparison. 29. Post-qualification 29.1 The Procuring Entity Shall Determine To Its Satisfaction Whether The Bidder That Is Evaluated As Having Submitted The Lowest Calculated Bid (lcb) Complies With And Is Responsive To All The Requirements And Conditions Specified In Itb Clauses 5, 12, And 13. 29.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lcb, The Bidder Shall Submit The Following Documentary Requirements: (a) Latest Income And Business Tax Returns In The Form Specified In The Bds; (b) Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. Failure Of The Bidder Declared As Lowest Calculated Bid To Duly Submit The Above Requirements On Time Under This Clause Or A Finding Against The Veracity Of Such Shall Be Ground For Forfeiture Of The Bid Security And Disqualification Of The Bidder For Award. 29.3 The Determination Shall Be Based Upon An Examination Of The Documentary Evidence Of The Bidder’s Qualifications Submitted Pursuant To Itb Clauses 12 And 13, As Well As Other Information As The Procuring Entity Deems Necessary And Appropriate, Using A Non-discretionary “pass/fail” Criterion. 29.4 If The Bac Determines That The Bidder With The Lowest Calculated Bid Passes All The Criteria For Post-qualification, It Shall Declare The Said Bid As The Lowest Calculated Responsive Bid, And Recommend To The Head Of The Procuring Entity The Award Of Contract To The Said Bidder At Its Submitted Bid Price Or Its Calculated Bid Price, Whichever Is Lower. 29.5 A Negative Determination Shall Result In Rejection Of The Bidder’s Bid, In Which Event The Procuring Entity Shall Proceed To The Next Lowest Calculated Bid To Make A Similar Determination Of That Bidder’s Capabilities To Perform Satisfactorily. If The Second Bidder, However, Fails The Post Qualification, The Procedure For Post Qualification Shall Be Repeated For The Bidder With The Next Lowest Calculated Bid, And So On Until The Lowest Calculated Responsive Bid Is Determined For Contract Award. 29.6 Within A Period Not Exceeding Fifteen (15) Calendar Days From The Date Of Receipt Of The Recommendation Of The Bac, The Head Of The Procuring Entity Shall Approve Or Disapprove The Said Recommendation. 30. Reservation Clause 30.1 Notwithstanding The Eligibility Or Post-qualification Of A Bidder, The Procuring Entity Concerned Reserves The Right To Review Its Qualifications At Any Stage Of The Procurement Process If It Has Reasonable Grounds To Believe That A Misrepresentation Has Been Made By The Said Bidder, Or That There Has Been A Change In The Bidder’s Capability To Undertake The Project From The Time It Submitted Its Eligibility Requirements. Should Such Review Uncover Any Misrepresentation Made In The Eligibility And Bidding Requirements, Statements Or Documents, Or Any Changes In The Situation Of The Bidder Which Will Affect Its Capability To Undertake The Project So That It Fails The Preset Eligibility Or Bid Evaluation Criteria, The Procuring Entity Shall Consider The Said Bidder As Ineligible And Shall Disqualify It From Submitting A Bid Or From Obtaining An Award Or Contract. 30.2 Based On The Following Grounds, The Procuring Entity Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding At Any Time Prior To The Contract Award, Or Not To Award The Contract, Without Thereby Incurring Any Liability, And Make No Assurance That A Contract Shall Be Entered Into As A Result Of The Bidding: (a) If There Is Prima Facie Evidence Of Collusion Between Appropriate Public Officers Or Employees Of The Procuring Entity, Or Between The Bac And Any Of The Bidders, Or If The Collusion Is Between Or Among The Bidders Themselves, Or Between A Bidder And A Third Party, Including Any Act Which Restricts, Suppresses Or Nullifies Or Tends To Restrict, Suppress Or Nullify Competition; (b) If The Procuring Entity’s Bac Is Found To Have Failed In Following The Prescribed Bidding Procedures; Or (c) For Any Justifiable And Reasonable Ground Where The Award Of The Contract Will Not Redound To The Benefit Of The Gop As Follows: (i) If The Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially Or Technically Feasible As Determined By The Head Of The Procuring Entity; (ii) If The Project Is No Longer Necessary As Determined By The Head Of The Procuring Entity; And (iii) If The Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Procuring Entity. 30.3 In Addition, The Procuring Entity May Likewise Declare A Failure Of Bidding When: (a) No Bids Are Received; (b) All Prospective Bidders Are Declared Ineligible; (c) All Bids Fail To Comply With All The Bid Requirements Or Fail Post-qualification; Or (d) The Bidder With The Lowest Calculated Responsive Bid Refuses, Without Justifiable Cause To Accept The Award Of Contract, And No Award Is Made In Accordance With Section 40 Of The Irr Of Ra 9184. F. Award Of Contract 31. Contract Award 31.1 Subject To Itb Clause 29, The Procuring Entity Shall Award The Contract To The Bidder Whose Bid Has Been Determined To Be The Lcrb. 31.2 Prior To The Expiration Of The Period Of Bid Validity, The Procuring Entity Shall Notify The Successful Bidder In Writing That Its Bid Has Been Accepted, Through A Notice Of Award Received Personally Or Sent By Registered Mail Or Electronically, Receipt Of Which Must Be Confirmed In Writing Within Two (2) Days By The Bidder With The Lcrb And Submitted Personally Or Sent By Registered Mail Or Electronically To The Procuring Entity. 31.3 Notwithstanding The Issuance Of The Notice Of Award, Award Of Contract Shall Be Subject To The Following Conditions: (a) Submission Of The Valid Jva, If Applicable, Within Ten (10) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That The Bidder Has The Lcrb; (b) Posting Of The Performance Security In Accordance With Itb Clause 33; (c) Signing Of The Contract As Provided In Itb Clause 32; And (d) Approval By Higher Authority, If Required. 31.4 At The Time Of Contract Award, The Procuring Entity Shall Not Increase Or Decrease The Quantity Of Goods Originally Specified In Section Vi – Schedule Of Requirements. 32. Signing Of The Contract 32.1 At The Same Time As The Procuring Entity Notifies The Successful Bidder That Its Bid Has Been Accepted, The Procuring Entity Shall Send The Contract Form To The Bidder, Which Contract Has Been Provided In The Bidding Documents, Incorporating Therein All Agreements Between The Parties. 32.2 Within Ten (10) Calendar Days From Receipt Of The Notice Of Award, The Successful Bidder Shall Post The Required Performance Security And Sign And Date The Contract And Return It To The Procuring Entity. 32.3 The Procuring Entity Shall Enter Into Contract With The Successful Bidder Within The Same Ten (10) Calendar Day Period Provided That All The Documentary Requirements Are Complied With. 32.4 The Following Documents Shall Form Part Of The Contract. (a) Contract Agreement; (b) Bidding Documents; (c) Winning Bidder’s Bid, Including The Technical And Financial Proposals, And All Other Documents/statements Submitted; (d) Performance Security; (e) Notice Of Award Of Contract; And (f) Other Contract Documents That May Be Required By Existing Laws And/or Specified In The Bds. 33. Performance Security 33.1 To Guarantee The Faithful Performance By The Winning Bidder Of Its Obligations Under The Contract, It Shall Post A Performance Security Within A Maximum Period Of Ten (10) Calendar Days From The Receipt Of The Notice Of Award From The Procuring Entity And In No Case Later Than The Signing Of The Contract. 33.2 The Procuring Entity Shall Prescribe At Least One (1) Acceptable Form Of Performance Security Taken From The Categories Below That Bidders May Opt To Use, Denominated In Philippine Pesos And Posted In Favor Of The Procuring Entity: Form Of Performance Security Amount Of Performance Security (not Less Than The Percentage Of The Total Contract Price) (a) Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank Five Percent (5%) (b) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank. (c) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Thirty Percent (30%) (d) Performance Securing Declaration (psd) None 33.3 Performance Security As Indicated In Section 17.1 (k) And 39 Of The 2016 Revised Irr Of Ra No. 9184, While Includes The Performance Securing Declaration (psd) As An Alternative Performance Security During A State Of Calamity Or Imposition Of Community Quarantine Pursuant To Gppb Resolution No. 09-2020. Failure Of The Successful Bidder To Comply With The Above-mentioned Requirement Shall Constitute Sufficient Ground For The Annulment Of The Award And Forfeiture Of The Bid Security, In Which Event The Procuring Entity Shall Initiate And Complete The Post Qualification Of The Second Lowest Calculated Bid. The Procedure Shall Be Repeated Until The Lcrb Is Identified And Selected For Contract Award. However If No Bidder Passed Post-qualification, The Bac Shall Declare The Bidding A Failure And Conduct A Re-bidding With Re-advertisement. 34. Notice To Proceed 34.1 Within Seven (7) Calendar Days From The Date Of Approval Of The Contract By The Appropriate Government Approving Authority, The Procuring Entity Shall Issue Its Notice To Proceed Together With A Copy Or Copies Of The Approved Contract To The Successful Bidder. All Notices Called For By The Terms Of The Contract Shall Be Effective Only At The Time Of Receipt Thereof By The Successful Bidder. 34.2 The Contract Effectivity Date Shall Be Provided In The Notice To Proceed By The Procuring Entity, Which Date Shall Not Be Later Than Seven (7) Calendar Days From The Issuance Of The Notice To Proceed. 35. Protest Mechanism Decision Of The Procuring Entity At Any Stage Of The Procurement Process May Be Questioned In Accordance With Section 55 Of The Revised Implementing Rules And Regulations Of Republic Act 9184 Section Iii – Bid Data Sheet Itb Clause 1.1 The Procuring Entity Is Brgy. Botong, Badiangan, Iloilo 1.2 The Reference Is: Supply And Delivery Of Materials For The Concreting Of Canal, Brgy. Botong, Badiangan, Iloilo. Project Identification No. 2024 – 044 – B - Pa. 2.0 The Funding Source Is 20% Barangay Development Fund 2024 20% Barangay Development Fund 2023 Of Barangay Botong, Badiangan, Iloilo In The Amount Of P 267,700.00 5.1 No Further Instructions. 5.2 None Of The Circumstances Mentioned In The Itb Clause Exists In This Project. Foreign Bidders, Except Those Falling Under Itb Clause 5.2(b), May Not Participate In This Project. 5.4 The Bidder Must Have Completed, Within The Period Specified In The Invitation To Bid And Itb Clause 12.1(a)(ii), A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. For This Purpose, Similar Contracts Shall Refer To The Supply And Delivery Of Goods That Is/are Similar In Type And Brand To The Goods Being Bidded-out. 5.5 No Further Instructions. 6.3 No Further Instructions. 7 No Further Instructions. 8.1 Subcontracting Is Not Allowed. 8.2 Not Applicable. 9.1 Not Applicable. 10.1 The Procuring Entity’s Address Is: Badiangan Municipal Hall R.c. Tabiana St., Poblacion, Badiangan, Iloilo 5033 Contact Person: Mr. Humbert S. Recomono Head: Bac Secretariat Municipal Hall, Badiangan, Iloilo Tel. No. (033) 320-7809 C.p. No. 09198501252 12.1 The First Envelope Shall Contain The Eligibility And Technical Documents Stated In The Itb Clause. However, If The Bidder Maintains A Current And Updated File Of Its Class “a” Documents With The Bac Of The Local Government Of Badiangan, Iloilo, A Certification To That Effect Issued By Its Bac May Be Submitted In Lieu Of The Class “a” Documents. 12.1(a)(i) No Other Acceptable Proof Of Registration Is Recognized. 12.1(a)(ii) The Statement Of All Ongoing And Single Largest Completed Government And Private Contracts Shall Include All Such Contracts Within The Last Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 13.1 No Additional Requirements. 13.2 The Approved Budget For The Contract (abc) Is: P 267,700.00 Any Bid With A Financial Component Exceeding This Amount Shall Not Be Accepted. 15.4(a)(iii) No Incidental Services Required. 15.4(b) Not Applicable. 15.5 Bid Prices Shall Be Fixed. Adjustable Price Proposals Shall Be Treated As Non-responsive And Shall Be Rejected. 15.6 Extraordinary Circumstances Refer To Events That May Be Determined By The National Economic And Development Authority In Accordance With The Civil Code Of The Philippines, And Upon The Recommendation Of The Procuring Entity. 16.1(b) The Bid Prices For Goods Supplied From Outside Of The Philippines Shall Be Quoted In Philippine Pesos. 16.3 No Further Instructions. 17.1 Bids Shall Be Valid Until 120 Calendar Days After Bidding. 18.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration (bsd), Or Any Of The Following Forms: 1. P (2% Of Abc), If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or 2. P (5% Of Abc), If Bid Security Is In Surety Bond 18.2 The Bid Security Shall Be Valid Until 120 Calendar Days After Bidding. 18.5(a)(iv) The Following Are Additional Grounds For Forfeiture Of Bid Security: 1. Submission Of Eligibility Requirements Containing False Information Or Falsified Documents. 2. Submission Of Bids That Contain False Information Or Falsified Documents, Or The Concealment Of Such Information In The Bids In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Public Bidding. 3. Allowing The Use Of One’s Name, Or Using The Name Of Another For Purposes Of Public Bidding. 4. Withdrawal Of A Bid, Or Refusal To Accept An Award, Or Enter Into Contract With The Government Without Justifiable Cause, After The Bidder Had Been Adjudged As Having Submitted The Lowest Calculated And Responsive Bid. 5. Refusal Or Failure To Post The Required Performance Security Within The Prescribed Time. 6. Refusal To Clarify Or Validate In Writing Its Bid During Post-qualification Within A Period Of Seven (7) Calendar Days From Receipt Of The Request For Clarification. 7. Any Documented Unsolicited Attempt By A Bidder To Unduly Influence The Outcome Of The Bidding In His Favor. 8. Failure Of The Potential Joint Venture Partners To Enter Into The Joint Venture After The Bid Is Declared As Successful. 9. All Other Acts That Tend To Defeat The Purpose Of The Competitive Bidding, Such As Habitually Withdrawing From Bidding, Submitting Late Bids Or Patently Insufficient Bid, For At Least Three (3) Times Within A Year, Except For Valid Reasons. 18.5(b)(iii) No Further Instructions. 20.1 The Documents Enclosed In The Original Bid Should Be Original Copy Or Duly Stamped Certified True/ Machine Copy With Printed Name And Signature Of The Owner Of The Company Or The Duly Authorized Representative Of The Company As Indicated In The Special Power Of Attorney (spa) Or Secretary’s Certificate. The Duly Authorized Representative Should Have A Specimen Signature In The Spa Or Secretary’s Certificate. 20.3 Each Bidder Shall Submit One (1) Original And Two (2) Copies Of The First And Second Components Of Its Bid. The Photocopied Copies Of The Documents Enclosed In The First And Second Components Of The Bid Should Be Duly Stamped Certified True/ Machine Copy With Printed Name And Signature Of The Owner Of The Company Or The Duly Authorized Representative Of The Company As Indicated In The Special Power Of Attorney (spa) Or Secretary’s Certificate. The Duly Authorized Representative Should Have A Specimen Signature In The Spa Or Secretary’s Certificate. 21 The Address For Submission Of Bids Is: Municipal Budget Office, Municipal Hall, Badiangan, Iloilo The Deadline For Submission Of Bid Is: November 25, 2024; 8:30 A.m. 24.1 The Place Of Bid Opening Is: Municipal Social Hall, Badiangan, Iloilo The Date And Time Of Bid Opening Is: November 25, 2024; 09:00 A.m. 25.1 No Further Instructions. 27.1 No Further Instructions. 28.3 No Further Instructions. 28.3(b) Modification Of Bids Is Not Allowed. 28.5 No Further Instructions. 29.2(a) Only Tax Returns Filed And Taxes Paid Through The Bir Electronic Filing And Payment System (efps) Shall Be Accepted. Note: The Latest Income And Business Tax Returns Are Those Within The Last Six Months Preceding The Date Of Bid Submission. 29.2(d) None Required. 32.4(g) None Required. 34.2 The Effective Date Of The Contract Is Seven (7) Calendar Days Upon Receipt Of Notice To Proceed Issued By The Procuring Entity. Section Iv. General Conditions Of Contract 1. Definitions 1.1 In This Contract, The Following Terms Shall Be Interpreted As Indicated. (a) “the Contract” Means The Agreement Entered Into Between The Procuring Entity And The Supplier, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. (b) “the Contract Price” Means The Price Payable To The Supplier Under The Contract For The Full And Proper Performance Of Its Contractual Obligations. (c) “the Goods” Means All Of The Supplies, Equipment, Machinery, Spare Parts, Other Materials And/or General Support Services Which The Supplier Is Required To Provide To The Procuring Entity Under The Contract. (d) “the Services” Means Those Services Ancillary To The Supply Of The Goods, Such As Transportation And Insurance, And Any Other Incidental Services, Such As Installation, Commissioning, Provision Of Technical Assistance, Training, And Other Such Obligations Of The Supplier Covered Under The Contract. (e) “gcc” Means The General Conditions Of Contract Contained In This Section. (f) “scc” Means The Special Conditions Of Contract. (g) “the Procuring Entity” Means The Organization Purchasing The Goods, As Named In The Scc,. (h) “the Procuring Entity’s Country” Is The Philippines. (i) “the Supplier” Means The Individual Contractor, Manufacturer, Distributor, Or Firm Supplying/manufacturing The Goods And Services Under This Contract And Named In The Scc, (j) The “funding Source” Means The Organization Named In The Scc,. (k) “the Project Site,” Where Applicable, Means The Place Or Places Named In The Scc, (l) “day” Means Calendar Day. (m) The “effective Date” Of The Contract Will Be The Date Of Receipt By The Supplier Of The Notice To Proceed Or The Date Provided In The Notice To Proceed. Performance Of All Obligations Shall Be Reckoned From The Effective Date Of The Contract. (n) “verified Report” Refers To The Report Submitted By The Implementing Unit To The Head Of The Procuring Entity Setting Forth Its Findings As To The Existence Of Grounds Or Causes For Termination And Explicitly Stating Its Recommendation For The Issuance Of A Notice To Terminate. 2. Corrupt, Fraudulent, Collusive, And Coercive Practices 2.1 The Procuring Entity As Well As The Bidders, Contractors, Or Suppliers Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of This Contract. In Pursuance Of This Policy, The Procuring Entity. (a) Defines, For The Purposes Of This Provision, The Terms Set Forth Below As Follows (i) "corrupt Practice" Means Behavior On The Part Of Officials In The Public Or Private Sectors By Which They Improperly And Unlawfully Enrich Themselves, Others, Or Induce Others To Do So, By Misusing The Position In Which They Are Placed, And It Includes The Offering, Giving, Receiving, Or Soliciting Of Anything Of Value To Influence The Action Of Any Such Official In The Procurement Process Or In Contract Execution; Entering, On Behalf Of The Government, Into Any Contract Or Transaction Manifestly And Grossly Disadvantageous To The Same, Whether Or Not The Public Officer Profited Or Will Profit Thereby, And Similar Acts As Provided In Republic Act 3019. (ii) "fraudulent Practice" Means A Misrepresentation Of Facts In Order To Influence A Procurement Process Or The Execution Of A Contract To The Detriment Of The Procuring Entity, And Includes Collusive Practices Among Bidders (prior To Or After Bid Submission) Designed To Establish Bid Prices At Artificial, Non-competitive Levels And To Deprive The Procuring Entity Of The Benefits Of Free And Open Competition. (iii) “collusive Practices” Means A Scheme Or Arrangement Between Two Or More Bidders, With Or Without The Knowledge Of The Procuring Entity, Designed To Establish Bid Prices At Artificial, Non-competitive Levels. (iv) “coercive Practices “ Means Harming Or Threatening To Harm, Directly Or Indirectly, Persons, Or Their Property To Influence Their Participation In A Procurement Process, Or Effect The Execution Of A Contract; (v) “obstructive Practice” Is (aa) Deliberately Destroying, Falsifying, Altering Or Concealing Of Evidence Material To An Administrative Proceedings Or Investigation Or Making False Statements To Investigators In Order To Materially Impede An Administrative Proceedings Or Investigation Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Into Allegations Of A Corrupt, Fraudulent, Coercive Or Intimidating Any Party To Prevent If From Disclosing Its Knowledge Of Matters Relevant To The Administrative Proceedings Or Investigation Or From Pursuing Such Proceedings Or Investigation; Or (bb) Acts Intended To Materially Impede The Exercise Of The Inspection And Audit Rights Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Herein. (b) Will Reject A Proposal For Award If It Determines That The Bidder Recommended For Award Has Engaged In Any Of The Practices Mentioned In This Clause For Purposes Of Competing For The Contract. 3. Inspection And Audit By The Funding Source The Supplier Shall Permit The Funding Source To Inspect The Supplier’s Accounts And Records Relating To The Performance Of The Supplier And To Have Them Audited By Auditors Appointed By The Funding Source, If So Required By The Funding Source. 4. Governing Law And Language 4.1 This Contract Shall Be Interpreted In Accordance With The Laws Of The Republic Of The Philippines. 4.2 This Contract Has Been Executed In The English Language, Which Shall Be The Binding And Controlling Language For All Matters Relating To The Meaning Or Interpretation Of This Contract. All Correspondence And Other Documents Pertaining To This Contract Exchanged By The Parties Shall Be Written In English. 5. Notices 5.1 Any Notice, Request, Or Consent Required Or Permitted To Be Given Or Made Pursuant To This Contract Shall Be In Writing. Any Such Notice, Request, Or Consent Shall Be Deemed To Have Been Given Or Made When Received By The Concerned Party, Either In Person Or Through An Authorized Representative Of The Party To Whom The Communication Is Addressed, Or When Sent By Registered Mail, Telex, Telegram, Or Facsimile To Such Party At The Address Specified In The Scc, Which Shall Be Effective When Delivered And Duly Received Or On The Notice’s Effective Date, Whichever Is Later. 5.2 A Party May Change Its Address For Notice Hereunder By Giving The Other Party Notice Of Such Change Pursuant To The Provisions Listed In The Scc For Gcc Clause 5.1. 6. Scope Of Contract 6.1 The Goods And Related Services To Be Provided Shall Be As Specified In Section Vi – Schedule Of Requirements. 6.2 This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. Any Additional Requirements For The Completion Of This Contract Shall Be Provided In The Scc 7. Subcontracting 7.1 Subcontracting Of Any Portion Of The Goods, If Allowed In The Bds, Does Not Relieve The Supplier Of Any Liability Or Obligation Under This Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants Or Workmen As Fully As If These Were The Supplier’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants Or Workmen. 7.2 Subcontractors Disclosed And Identified During The Bidding May Be Changed During The Implementation Of This Contract, Subject To Compliance With The Required Qualifications And The Approval Of The Procuring Entity. 8. Procuring Entity’s Responsibilities 8.1 Whenever The Performance Of The Obligations In This Contract Requires That The Supplier Obtain Permits, Approvals, Import, And Other Licenses From Local Public Authorities, The Procuring Entity Shall, If So Needed By The Supplier, Make Its Best Effort To Assist The Supplier In Complying With Such Requirements In A Timely And Expeditious Manner. 8.2 The Procuring Entity Shall Pay All Costs Involved In The Performance Of Its Responsibilities In Accordance With Gcc Clause 6. 9. Prices Prices Charged By The Supplier For Goods Delivered And/or Services Performed Under This Contract Shall Not Vary From The Prices Quoted By The Supplier In Its Bid, With The Exception Of Any Change In Price Resulting From A Change Order Issued In Accordance With Gcc Clause 29, Or If Applicable, Adjustments Authorized In Accordance With The Price Adjustment Provisions Specified In The Scc.. 10. Payment 10.1 Unless Otherwise Specified In The Scc, Payments Shall Be Made Only Upon A Certification By The Head Of The Procuring Entity To The Effect That The Goods Have Been Rendered Or Delivered In Accordance With The Terms Of This Contract And Have Been Duly Inspected And Accepted. Except With The Prior Approval Of The President No Payment Shall Be Made For Services Not Yet Rendered Or For Supplies And Materials Not Yet Delivered Under This Contract. Ten Percent (10%) Of The Amount Of Each Payment Shall Be Retained By The Procuring Entity To Cover The Supplier’s Warranty Obligations Under This Contract As Described In Gcc Clause 17. 10.2 The Supplier’s Request(s) For Payment Shall Be Made To The Procuring Entity In Writing, Accompanied By An Invoice Describing, As Appropriate, The Goods Delivered And/or Services Performed, And By Documents Submitted Pursuant To The Scc Provision For Gcc Clause 6.2, And Upon Fulfillment Of Other Obligations Stipulated In This Contract. 10.3 Pursuant To Gcc Clause 10.2, Payments Shall Be Made Promptly By The Procuring Entity, But In No Case Later Than Sixty (60) Days After Submission Of An Invoice Or Claim By The Supplier. 10.4 Unless Otherwise Specified In The Scc, The Currency In Which Payment Is Made To The Supplier Under This Contract Shall Be In Philippine Pesos. 11. Advance Payment 11.1 Advance Payment Shall Be Made Only After Prior Approval Of The President, And Shall Not Exceed Fifteen Percent (15%) Of The Contract Amount, Unless Otherwise Directed By The President Or In Cases Allowed Under Annex “d” Of Ra 9184. 11.2 For Goods Supplied From Abroad, The Terms Of Payment Shall Be As Follows: (a) On Contract Signature: Fifteen Percent (15%) Of The Contract Price Shall Be Paid Within Sixty (60) Days From Signing Of The Contract And Upon Submission Of A Claim And A Bank Guarantee For The Equivalent Amount Valid Until The Goods Are Delivered And In The Form Provided In Section Viii. Bidding Forms. (b) On Delivery: Sixty-five Percent (65%) Of The Contract Price Shall Be Paid To The Supplier Within Sixty (60) Days After The Date Of Receipt Of The Goods And Upon Submission Of The Documents (i) Through (vi) Specified In The Scc Provision On Delivery And Documents. (c) On Acceptance: The Remaining Twenty Percent (20%) Of The Contract Price Shall Be Paid To The Supplier Within Sixty (60) Days After The Date Of Submission Of The Acceptance And Inspection Certificate For The Respective Delivery Issued By The Procuring Entity’s Authorized Representative. In The Event That No Inspection Or Acceptance Certificate Is Issued By The Procuring Entity’s Authorized Representative Within Forty Five (45) Days Of The Date Shown On The Delivery Receipt The Supplier Shall Have The Right To Claim Payment Of The Remaining Twenty Percent (20%) Subject To The Procuring Entity’s Own Verification Of The Reason(s) For The Failure To Issue Documents (vii) And (viii) As Described In The Scc Provision On Delivery And Documents. 11.3 All Progress Payments Shall First Be Charged Against The Advance Payment Until The Latter Has Been Fully Exhausted. 12. Taxes And Duties The Supplier, Whether Local Or Foreign, Shall Be Entirely Responsible For All The Necessary Taxes, Stamp Duties, License Fees, And Other Such Levies Imposed For The Completion Of This Contract. 13. Performance Security 13.1 Unless Otherwise Specified In The Scc, Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any The Forms Prescribed In The Itb Clause 33.2. 13.2 The Performance Security Posted In Favor Of The Procuring Entity Shall Be Forfeited In The Event It Is Established That The Winning Bidder Is In Default In Any Of Its Obligations Under The Contract. 13.3 The Performance Security Shall Remain Valid Until Issuance By The Procuring Entity Of The Certificate Of Final Acceptance. 13.4 Unless Otherwise Specified In The Scc, The Performance Security May Be Released By The Procuring Entity And Returned To The Supplier After The Issuance Of The Certificate Of Final Acceptance Subject To The Following Conditions. (a) There Are No Pending Claims Against The Supplier Or The Surety Company Filed By The Procuring Entity; (b) The Supplier Has No Pending Claims For Labor And Materials Filed Against It; And (c) Other Terms Specified In The Scc 13.5 In Case Of A Reduction Of The Contract Value, The Procuring Entity Shall Allow A Proportional Reduction In The Original Performance Security, Provided That Any Such Reduction Is More Than Ten Percent (10%) And That The Aggregate Of Such Reductions Is Not More Than Fifty Percent (50%) Of The Original Performance Security. 14. Use Of Contract Documents And Information 14.1 The Supplier Shall Not, Except For Purposes Of Performing The Obligations In This Contract, Without The Procuring Entity’s Prior Written Consent, Disclose This Contract, Or Any Provision Thereof, Or Any Specification, Plan, Drawing, Pattern, Sample, Or Information Furnished By Or On Behalf Of The Procuring Entity. Any Such Disclosure Shall Be Made In Confidence And Shall Extend Only As Far As May Be Necessary For Purposes Of Such Performance. 14.2 Any Document, Other Than This Contract Itself, Enumerated In Gcc Clause 14.1shall Remain The Property Of The Procuring Entity And Shall Be Returned (all Copies) To The Procuring Entity On Completion Of The Supplier’s Performance Under This Contract If So Required By The Procuring Entity. 15. Standards The Goods Provided Under This Contract Shall Conform To The Standards Mentioned In The Section Vii – Technical Specifications,; And, When No Applicable Standard Is Mentioned, To The Authoritative Standards Appropriate To The Goods’ Country Of Origin. Such Standards Shall Be The Latest Issued By The Institution Concerned. 16. Inspection And Tests 16.1 The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Contract Specifications At No Extra Cost To The Procuring Entity. The Scc And Section Vii – Technical Specifications Shall Specify What Inspections And/or Tests The Procuring Entity Requires And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. 16.2 If Applicable, The Inspections And Tests May Be Conducted On The Premises Of The Supplier Or Its Subcontractor(s), At Point Of Delivery, And/or At The Goods’ Final Destination. If Conducted On The Premises Of The Supplier Or Its Subcontractor(s), All Reasonable Facilities And Assistance, Including Access To Drawings And Production Data, Shall Be Furnished To The Inspectors At No Charge To The Procuring Entity. 16.3 The Procuring Entity Or Its Designated Representative Shall Be Entitled To Attend The Tests And/or Inspections Referred To In This Clause Provided That The Procuring Entity Shall Bear All Of Its Own Costs And Expenses Incurred In Connection With Such Attendance Including, But Not Limited To, All Traveling And Board And Lodging Expenses. 16.4 The Procuring Entity May Reject Any Goods Or Any Part Thereof That Fail To Pass Any Test And/or Inspection Or Do Not Conform To The Specifications. The Supplier Shall Either Rectify Or Replace Such Rejected Goods Or Parts Thereof Or Make Alterations Necessary To Meet The Specifications At No Cost To The Procuring Entity, And Shall Repeat The Test And/or Inspection, At No Cost To The Procuring Entity, Upon Giving A Notice Pursuant To Gcc Clause 5. 16.5 The Supplier Agrees That Neither The Execution Of A Test And/or Inspection Of The Goods Or Any Part Thereof, Nor The Attendance By The Procuring Entity Or Its Representative, Shall Release The Supplier From Any Warranties Or Other Obligations Under This Contract. 17. Warranty 17.1 The Supplier Warrants That The Goods Supplied Under The Contract Are New, Unused, Of The Most Recent Or Current Models, And That They Incorporate All Recent Improvements In Design And Materials, Except When The Technical Specifications Required By The Procuring Entity Provides Otherwise. 17.2 The Supplier Further Warrants That All Goods Supplied Under This Contract Shall Have No Defect, Arising From Design, Materials, Or Workmanship Or From Any Act Or Omission Of The Supplier That May Develop Under Normal Use Of The Supplied Goods In The Conditions Prevailing In The Country Of Final Destination. 17.3 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier For A Minimum Period Specified In The Scc. The Obligation For The Warranty Shall Be Covered By, At The Supplier’s Option, Either Retention Money In An Amount Equivalent To At Least One Percent (1%) Of Every Progress Payment, Or A Special Bank Guarantee Equivalent To At Least One Percent (1%) Of The Contract Price Or Other Such Amount If So Specified In The Scc. The Said Amounts Shall Only Be Released After The Lapse Of The Warranty Period Specified In The Scc; Provided, However, That The Supplies Delivered Are Free From Patent And Latent Defects And All The Conditions Imposed Under This Contract Have Been Fully Met. 17.4 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Within The Period Specified In The Scc And With All Reasonable Speed, Repair Or Replace The Defective Goods Or Parts Thereof, Without Cost To The Procuring Entity 17.5 If The Supplier, Having Been Notified, Fails To Remedy The Defect(s) Within The Period Specified In Gcc Clause 17.4, The Procuring Entity May Proceed To Take Such Remedial Action As May Be Necessary, At The Supplier’s Risk And Expense And Without Prejudice To Any Other Rights Which The Procuring Entity May Have Against The Supplier Under The Contract And Under The Applicable Law 18 Delays In The Supplier’s Performance 18.1 Delivery Of The Goods And/or Performance Of Services Shall Be Made By The Supplier In Accordance With The Time Schedule Prescribed By The Procuring Entity In Section Vi – Schedule Of Requirements. 18.2 If At Any Time During The Performance Of This Contract, The Supplier Or Its Subcontractor(s) Should Encounter Conditions Impeding Timely Delivery Of The Goods And/or Performance Of Services, The Supplier Shall Promptly Notify The Procuring Entity In Writing Of The Fact Of The Delay, Its Likely Duration And Its Cause(s). As Soon As Practicable After Receipt Of The Supplier’s Notice, And Upon Causes Provided For Under Gcc Clause 22, The Procuring Entity Shall Evaluate The Situation And May Extend The Supplier’s Time For Performance, In Which Case The Extension Shall Be Ratified By The Parties By Amendment Of Contract. 18.3 Except As Provided Under Gcc Clause 22, A Delay By The Supplier In The Performance Of Its Obligations Shall Render The Supplier Liable To The Imposition Of Liquidated Damages Pursuant To Gcc Clause 19, Unless An Extension Of Time Is Agreed Upon Pursuant To Gcc Clause 29 Without The Application Of Liquidated Damages. 19. Liquidated Damages Subject To Gcc Clause 18 And 22, If The Supplier Fails To Satisfactorily Deliver Any Or All Of The Goods And/or To Perform The Services Within The Period(s) Specified In This Contract Inclusive Of Duly Granted Time Extensions If Any, The Procuring Entity Shall, Without Prejudice To Its Other Remedies Under This Contract And Under The Applicable Law, Deduct From The Contract Price, As Liquidated Damages, A Sum Equivalent To The Percentage Specified In Thescc Of The Delivered Price Of The Delayed Goods Or Unperformed Services For Each Week Or Part Thereof Of Delay Until Actual Delivery Or Performance, Up To A Maximum Deduction Of The Percentage Specified In The Scc. Once The Maximum Is Reached, The Procuring Entity Shall Rescind The Contract Pursuant To Gcc Clause 23, Without Prejudice To Other Courses Of Action And Remedies Open To It. 20. Settlement Of Disputes 20.1 If Any Dispute Or Difference Of Any Kind Whatsoever Shall Arise Between The Procuring Entity And The Supplier In Connection With Or Arising Out Of This Contract, The Parties Shall Make Every Effort To Resolve Amicably Such Dispute Or Difference By Mutual Consultation. 20.2 If After Thirty (30) Days, The Parties Have Failed To Resolve Their Dispute Or Difference By Such Mutual Consultation, Then Either The Procuring Entity Or The Supplier May Give Notice To The Other Party Of Its Intention To Commence Arbitration, As Hereinafter Provided, As To The Matter In Dispute, And No Arbitration In Respect Of This Matter May Be Commenced Unless Such Notice Is Given. 20.3 Any Dispute Or Difference In Respect Of Which A Notice Of Intention To Commence Arbitration Has Been Given In Accordance With This Clause Shall Be Settled By Arbitration. Arbitration May Be Commenced Prior To Or After Delivery Of The Goods Under This Contract. 20.4 Arbitration Proceedings Shall Be Conducted In Accordance With The Rules Of Procedure Specified In The Scc. 20.5 Notwithstanding Any Reference To Arbitration Herein, The Parties Shall Continue To Perform Their Respective Obligations Under The Contract Unless They Otherwise Agree; And The Procuring Entity Shall Pay The Supplier Any Monies Due The Supplier. 21 Liability Of The Supplier 21.1 Subject To Additional Provisions, If Any, Set Forth In The Scc, The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. 21.2 Except In Cases Of Criminal Negligence Or Willful Misconduct, And In The Case Of Infringement Of Patent Rights, If Applicable, The Aggregate Liability Of The Supplier To The Procuring Entity Shall Not Exceed The Total Contract Price, Provided That This Limitation Shall Not Apply To The Cost Of Repairing Or Replacing Defective Equipment. 22. Force Majeure 22.1 The Supplier Shall Not Be Liable For Forfeiture Of Its Performance Security, Liquidated Damages, Or Termination For Default If And To The Extent That Its Delay In Performance Or Other Failure To Perform Its Obligations Under The Contract Is The Result Of A Force Majeure. 22.2 For Purposes Of This Contract The Terms “force Majeure” And “fortuitous Event” May Be Used Interchangeably. In This Regard, A Fortuitous Event Or Force Majeure Shall Be Interpreted To Mean An Event Which The Contractor Could Not Have Foreseen, Or Which Though Foreseen, Was Inevitable. It Shall Not Include Ordinary Unfavorable Weather Conditions; And Any Other Cause The Effects Of Which Could Have Been Avoided With The Exercise Of Reasonable Diligence By The Contractor. 22.3 If A Force Majeure Situation Arises, The Supplier Shall Promptly Notify The Procuring Entity In Writing Of Such Condition And The Cause Thereof. Unless Otherwise Directed By The Procuring Entity In Writing, The Supplier Shall Continue To Perform Its Obligations Under The Contract As Far As Is Reasonably Practical, And Shall Seek All Reasonable Alternative Means For Performance Not Prevented By The Force Majeure. 23. Termination For Default 23.1 The Procuring Entity Shall Terminate This Contract For Default When Any Of The Following Conditions Attends Its Implementation. (a) Outside Of Force Majeure, The Supplier Fails To Deliver Or Perform Any Or All Of The Goods Within The Period(s) Specified In The Contract, Or Within Any Extension Thereof Granted By The Procuring Entity Pursuant To A Request Made By The Supplier Prior To The Delay, And Such Failure Amounts To At Least Ten Percent (10%) Of The Contact Price; (b) As A Result Of Force Majeure, The Supplier Is Unable To Deliver Or Perform Any Or All Of The Goods, Amounting To At Least Ten Percent (10%) Of The Contract Price, For A Period Of Not Less Than Sixty (60) Calendar Days After Receipt Of The Notice From The Procuring Entity Stating That The Circumstance Of Force Majeure Is Deemed To Have Ceased; Or (c) The Supplier Fails To Perform Any Other Obligation Under The Contract.. 23.2 In The Event The Procuring Entity Terminates This Contract In Whole Or In Part, For Any Of The Reasons Provided Under Gcc Clauses 23 To 26, The Procuring Entity May Procure, Upon Such Terms And In Such Manner As It Deems Appropriate, Goods Or Services Similar To Those Undelivered, And The Supplier Shall Be Liable To The Procuring Entity For Any Excess Costs For Such Similar Goods Or Services. However, The Supplier Shall Continue Performance Of This Contract To The Extent Not Terminated. 23.3 In Case The Delay In The Delivery Of The Goods And/or Performance Of The Services Exceeds A Time Duration Equivalent To Ten Percent (10%) Of The Specified Contract Time Plus Any Time Extension Duly Granted To The Supplier, The Procuring Entity May Terminate This Contract, Forfeit The Supplier's Performance Security And Award The Same To A Qualified Supplier. 24. Termination For Insolvency The Procuring Entity Shall Terminate This Contract If The Supplier Is Declared Bankrupt Or Insolvent As Determined With Finality By A Court Of Competent Jurisdiction. In This Event, Termination Will Be Without Compensation To The Supplier, Provided That Such Termination Will Not Prejudice Or Affect Any Right Of Action Or Remedy Which Has Accrued Or Will Accrue Thereafter To The Procuring Entity And/or The Supplier. 25. Termination For Convenience 25.1 The Procuring Entity May Terminate This Contract, In Whole Or In Part, At Any Time For Its Convenience. The Head Of The Procuring Entity May Terminate A Contract For The Convenience Of The Government If He Has Determined The Existence Of Conditions That Make Project Implementation Economically, Financially Or Technically Impractical And/or Unnecessary, Such As, But Not Limited To, Fortuitous Event(s) Or Changes In Law And National Government Policies. 25.2 The Goods That Have Been Delivered And/or Performed Or Are Ready For Delivery Or Performance Within Thirty (30) Calendar Days After The Supplier’s Receipt Of Notice To Terminate Shall Be Accepted By The Procuring Entity At The Contract Terms And Prices. For Goods Not Yet Performed And/or Ready For Delivery, The Procuring Entity May Elect: (a) To Have Any Portion Delivered And/or Performed And Paid At The Contract Terms And Prices; And/or (b) To Cancel The Remainder And Pay To The Supplier An Agreed Amount For Partially Completed And/or Performed Goods And For Materials And Parts Previously Procured By The Supplier. 25.3 If The Supplier Suffers Loss In Its Initial Performance Of The Terminated Contract, Such As Purchase Of Raw Materials For Goods Specially Manufactured For The Procuring Entity Which Cannot Be Sold In Open Market, It Shall Be Allowed To Recover Partially From This Contract, On A Quantum Meruit Basis. Before Recovery May Be Made, The Fact Of Loss Must Be Established Under Oath By The Supplier To The Satisfaction Of The Procuring Entity Before Recovery May Be Made. 26. Termination For Unlawful Acts 26.1 The Procuring Entity May Terminate This Contract In Case It Is Determined Prima Facie That The Supplier Has Engaged, Before Or During The Implementation Of This Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation. Unlawful Acts Include, But Are Not Limited To, The Following: (a) Corrupt, Fraudulent, And Coercive Practices As Defined In Itb Clause 3.1(a); (b) Drawing Up Or Using Forged Documents; (c) Using Adulterated Materials, Means Or Methods, Or Engaging In Production Contrary To Rules Of Science Or The Trade; And (d) Any Other Act Analogous To The Foregoing. 27. Procedures For Termination Of Contracts 27.1 The Following Provisions Shall Govern The Procedures For Termination Of This Contract: (a) Upon Receipt Of A Written Report Of Acts Or Causes Which May Constitute Ground(s) For Termination As Aforementioned, Or Upon Its Own Initiative, The Implementing Unit Shall, Within A Period Of Seven (7) Calendar Days, Verify The Existence Of Such Ground(s) And Cause The Execution Of A Verified Report, With All Relevant Evidence Attached; (b) Upon Recommendation By The Implementing Unit, The Head Of The Procuring Entity Shall Terminate This Contract Only By A Written Notice To The Supplier Conveying The Termination Of This Contract. The Notice Shall State: (i) That This Contract Is Being Terminated For Any Of The Ground(s) Afore-mentioned, And A Statement Of The Acts That Constitute The Ground(s) Constituting The Same; (ii) The Extent Of Termination, Whether In Whole Or In Part; (iii) An Instruction To The Supplier To Show Cause As To Why This Contract Should Not Be Terminated; (iv) Special Instructions Of The Procuring Entity, If Any. (c) The Notice To Terminate Shall Be Accompanied By A Copy Of The Verified Report; (d) Within A Period Of Seven (7) Calendar Days From Receipt Of The Notice Of Termination, The Supplier Shall Submit To The Head Of The Procuring Entity A Verified Position Paper Stating Why This Contract Should Not Be Terminated. If The Supplier Fails To Show Cause After The Lapse Of The Seven (7) Day Period, Either By Inaction Or By Default, The Head Of The Procuring Entity Shall Issue An Order Terminating This Contract; (e) The Procuring Entity May, At Anytime Before Receipt Of The Supplier’s Verified Position Paper To Withdraw The Notice To Terminate If It Is Determined That Certain Items Or Works Subject Of The Notice Had Been Completed, Delivered, Or Performed Before The Supplier’s Receipt Of The Notice; (f) Within A Non-extendible Period Of Ten (10) Calendar Days From Receipt Of The Verified Position Paper, The Head Of The Procuring Entity Shall Decide Whether Or Not To Terminate This Contract. It Shall Serve A Written Notice To The Supplier Of Its Decision And, Unless Otherwise Provided, This Contract Is Deemed Terminated From Receipt Of The Supplier Of The Notice Of Decision. The Termination Shall Only Be Based On The Ground(s) Stated In The Notice To Terminate; (g) The Head Of The Procuring Entity May Create A Contract Termination Review Committee (ctrc) To Assist Him In The Discharge Of This Function. All Decisions Recommended By The Ctrc Shall Be Subject To The Approval Of The Head Of The Procuring Entity; And (h) The Supplier Must Serve A Written Notice To The Procuring Entity Of Its Intention To Terminate The Contract At Least Thirty (30) Calendar Days Before Its Intended Termination. The Contract Is Deemed Terminated If It Is Not Resumed In Thirty (30) Calendar Days After The Receipt Of Such Notice By The Procuring Entity. 28. Assignment Of Rights The Supplier Shall Not Assign His Rights Or Obligations Under This Contract, In Whole Or In Part, Except With The Procuring Entity’s Prior Written Consent. 29. Contract Amendment Subject To Applicable Laws, No Variation In Or Modification Of The Terms Of This Contract Shall Be Made Except By Written Amendment Signed By The Parties. 30. Application These General Conditions Shall Apply To The Extent That They Are Not Superseded By Provisions Of Other Parts Of This Contract. Section V – Special Conditions Of Contract Scc Clause 1.1(g) The Procuring Entity Is Barangay Botong, Badiangan, Iloilo. 1.1(i) The Supplier Is ________________________________. 1.1(j) The Funding Source Is Through The 20% Barangay Development Fund 2024 And 20% Barangay Development Fund 2023 Of Barangay Botong, Badiangan, Iloilo. The Total Approved Budget For The Contract Is Two Hundred Sixty Seven Thousand Seven Hundred Pesos Only (ᵽ 267,700.00) 1.1(k) The Project Site Or The Delivery Of The Goods Shall Be At Brgy. Botong, Badiangan, Iloilo. 5.1 The Procuring Entity’s Address For Notices Is: Hon. Suzette A. Mamon Municipal Mayor Badiangan Municipal Hall R.c. Tabiana St., Poblacion, Badiangan, Iloilo 5033 Tel. No: Mayor’s Office (033-320-0807) 6.2 The Additional Requirements For The Completion Of This Contract Are As Follows: Delivery And Documents - For Purposes Of The Contract(s), “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of The Contract(s) Shall Be As Follows: For Domestic Suppliers, “the Delivery Terms Applicable To This Contract Are Delivered To Brgy. Botong, Badiangan, Iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi – Schedule Of Requirements. The Details Of Shipping And/or Other Documents To Be Furnished By The Supplier Are As Follows: Upon Delivery Of Goods To The Project Site, The Supplier Shall Notify The Procuring Entity And Present The Following Documents To The Procuring Entity: (i) Original And Four Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; (ii) Original And Four Copies Delivery Receipt/note, Railway Receipt Or Truck Receipt; (iii) Original Supplier’s Factory Inspection Report; (iv) Original And Four Copies Of The Manufacturer’s And/or Supplier’s Warranty Certificate; (v) Original And Four Copies Of The Certificate Of Origin (for Imported Goods); (vi) Delivery Receipt Detailing Number And Description Of Items Received Signed By The Authorized Receiving Personnel; (vii) Certificate Of Acceptance/inspection Report Signed By The Procuring Entity’s Representative At The Project Site; And (viii) Four Copies Of The Invoice Receipt For Property Signed By The Procuring Entity’s Representative At The Project Site. For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Hon. Marites Saladero, Punong Barangay, Brgy. Botong, Badiangan, Iloilo. Incidental Services - The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi – Schedule Of Requirements. (a) Performance Or Supervision Of On-site Assembly And/or Start Up Of The Supplied Goods; (b) Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; (c) Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; (d) Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And (e) Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Insurance – The Goods Supplied Under This Contract Shall Be Fully Insured By The Supplier In A Freely Convertible Currency Against Loss Or Damage Incidental To Manufacture Or Acquisition, Transportation, Storage, And Delivery. The Goods Remain At The Risk And Title Of The Supplier Until Their Final Acceptance By The Procuring Entity. Transportation - Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure In Accordance With Gcc Clause 22. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Patent Rights - The Supplier Shall Indemnify The Procuring Entity Against All Third Party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 9 Bid Prices Are Considered Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances And Upon Prior Approval Of The Gppb In Accordance With Section 61 Of R.a. 9184 And Its Irr-a. 10.1 No Further Instructions. 10.4 No Further Instructions. 13.1 No Further Instructions. 13.4 No Further Instructions. 13.4 (c) No Further Instructions. 16.1 The Inspection And Test That Will Be Conducted Is Physical Inspection. 17.3 The Goods Shall Have A Warranty Period Of Three (3) Months After Acceptance By The Procuring Entity Of The Delivered Goods Or After The Goods Are Consumed Whichever Is Earlier. 17.4 & 17.5 The Period For Correction Of Defects In The Warranty Period Is Seven (7) Calendar Days From Either Verbal Or Written Notification. 19 The Applicable Rate Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, The Procuring Entity Shall Rescind The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. 20.4 In The Case Of A Dispute Between The Procuring Entity And The Supplier, The Dispute Shall Be Resolved In Accordance With Republic Act 9285 (“r.a. 9285”), Otherwise Known As The “alternative Dispute Resolution Act Of 2004.” 21.1 No Additional Provisions. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Days/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site Item No. Description Quantity Total Delivered, Days/months 1. Portland Cement 363 Bags 363 Bags 30 Calendar Days Upon Receipt Of P.o. 2. Washed Sand 7 Cu.m. 7 Cu.m. 30 Calendar Days Upon Receipt Of P.o. 3. ¾ Gravel 11 Cu.m. 11 Cu.m. 30 Calendar Days Upon Receipt Of P.o. 4. 10mmø Dsb 330 Lgths. 330 Lgths. 30 Calendar Days Upon Receipt Of P.o. 5. #16 Tie Wire 15 Kgs. 15 Kgs. 30 Calendar Days Upon Receipt Of P.o. 6. 4” Chb 2200 Pcs. 2200 Pcs. 30 Calendar Days Upon Receipt Of P.o. 7. ¼ Angle Bar 2x2 3 Lgths. 3 Lgths. 30 Calendar Days Upon Receipt Of P.o. 8. 16mmø Dsb 10 Lgths. 10 Lgths. 30 Calendar Days Upon Receipt Of P.o. 9. Welding Rod 5 Kgs. 5 Kgs. 30 Calendar Days Upon Receipt Of P.o. 10. Cutting Disc 4” 2 Pcs. 2 Pcs. 30 Calendar Days Upon Receipt Of P.o. 11. Epoxy Primer Gray 1 Gal. 1 Gal. 30 Calendar Days Upon Receipt Of P.o. 12. Paint Brush 2” 1 Pc. 1 Pc. 30 Calendar Days Upon Receipt Of P.o. 13. ¼ Ord. Plywood 1 Sheet 1 Sheet 30 Calendar Days Upon Receipt Of P.o. 14. Tarpaulin W/ Print 4x8 1 Sheet 1 Sheet 30 Calendar Days Upon Receipt Of P.o. 15. C.w. Nails 4” 1 Kg. 1 Kg. 30 Calendar Days Upon Receipt Of P.o. 16. C.w. Nails 1 ½” 1 Kg. 1 Kg. 30 Calendar Days Upon Receipt Of P.o. 17. 2x2x8 Good Lumber 6 Pcs. 6 Pcs. 30 Calendar Days Upon Receipt Of P.o. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ Section Vii. Technical Specifications Note: In The Statement Of Compliance Column, Bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Goods Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidders Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Provisions Of Itb Clause 3.1(a)(ii) And/or Gcc Clause 2.1(a)(ii). Item No. Specifications Statement Of Compliance Cross Reference 1. Portland Cement 2. Washed Sand 3. ¾ Gravel 4. 10mmø Dsb 5. #16 Tie Wire 6. 4” Chb 7. ¼ Angle Bar 2x2 8. 16mmø Dsb 9. Welding Rod 10. Cutting Disc 4” 11. Epoxy Primer Gray 12. Paint Brush 2” 13. ¼ Ord. Plywood 14. Tarpaulin W/ Print 4x8 15. C.w. Nails 4” 16. C.w. Nails 1 ½” 17. 2x2x8 Good Lumber Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: __________________________ Section Viii. Bidding Forms Bid Form Date: Project Identification No.: To: [name And Address Of Procuring Entity] Gentlemen And/or Ladies: Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To [supply/deliver/perform] [description Of The Goods] In Conformity With The Said Pbds For The Sum Of [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein Or In The Price Schedules. We Undertake, If Our Bid Is Accepted, To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements. If Our Bid Is Accepted, We Undertake To Provide A Performance Security In The Form, Amounts, And Within The Times Specified In The Bidding Documents. We Agree To Abide By This Bid For The Bid Validity Period Specified In Bds Provision For Itb Clause 18.2 And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period. Commissions Or Gratuities, If Any, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Of Agent Amount And Currency Purpose Of Commission Or Gratuity (if None, State “none”) Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid, Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements As Per Itb Clause 5 Of The Bidding Documents. We Likewise Certify/ Confirm That The Undersigned, [ For Sole Proprietorships, Insert: As The Owner And Sole Proprietor Or Authorized Representative Of Name Of Bidder, Has The Full Power And Authority To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract, On The Latter's Behalf For The [name Of Project] Of The [name Of Procuring Entity] [for Partnerships, Corporations, Cooperatives, Or Joint Ventures, Insert: Is Granted Full Power And Authority By The Name Of Bidder, To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract On The Latter's Behalf For [name Of Project] Of The [name Of The Procuring Entity]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Dated This ________________ Day Of ________________ 20______. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ For Goods Offered From Within The Philippines Name Of Bidder ____________________________ Project Identification Number __. Page Of . All Entries Must Be Computerized Or Typewritten 1 2 3 4 5 6 7 8 9 10 Item No. Description Country Of Origin Quantity Unit Unit Price Exw Per Item Transportation And Insurance And All Other Costs Incidental To Delivery, Per Item Sales And Other Taxes Payable If Contract Is Awarded, Per Item Cost Of Incidental Services, If Applicable, Per Item Total Price Per Unit (col 5 + 6 + 7 + 8) Total Price Delivered Final Destination (col. 9) X (col. 4) 1. Portland Cement 363 Bags 2. Washed Sand 7 Cu.m. 3. ¾ Gravel 11 Cu.m. 4. 10mmø Dsb 330 Lgths. 5. #16 Tie Wire 15 Kgs. 6. 4” Chb 2200 Pcs. 7. ¼ Angle Bar 2x2 3 Lgths. 8. 16mmø Dsb 10 Lgths. 9. Welding Rod 5 Kgs. 10. Cutting Disc 4” 2 Pcs. 11. Epoxy Primer Gray 1 Gal. 12. Paint Brush 2” 1 Pc. 13. ¼ Ord. Plywood 1 Sheet 14. Tarpaulin W/ Print 4x8 1 Sheet 15. C.w. Nails 4” 1 Kg. 16. C.w. Nails 1 ½” 1 Kg. 17. 2x2x8 Good Lumber 6 Pcs. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ Omnibus Sworn Statement Republic Of The Philippines ) Iloilocity ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Represent It In The Bidding For [name Of The Project] Of The [name Of The Procuring Entity]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary And/or To Represent The [name Of Bidder] In The Bidding As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate Issued By The Corporation Or The Members Of The Joint Venture)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: I Am Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S, 1930, As Amended, Or The Revised Penal Code, In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ___________________________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [jurat] Checklist Of Bid Requirements First Envelope Eligibility Documents Class “a” Documents Legal Documents: 1 Certificate Of Philgeps Registration (platinum Membership) And Membership With Annex A In Accordance With Section 8.5.2 Of The Revised Irr. Technical Documents: 2 Statement Of All Its On-going Government And Private Contracts Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, Including Contracts Awarded But Not Yet Started, If Any, Which Are Similar In Nature And Complexity To The Contract To Be Bid. The Statement Shall Include, For Each Contract, The Following: (a) Name Of The Contract; (b) Date Of The Contract, (c) Kind Of Goods, (d) Amount Of And Value Of Outstanding Contracts, (e) Date Of Delivery, And (f) Notice Of Award, Notice To Proceed, Contract Of Agreements, Purchase Orders And Certificate Of Accomplishments Issued By The Owner. (latest) 3 Statement Of Its Single Largest Completed Contract (slcc) Which Includes Its Government And Private Contracts Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, Which Are Similar In Nature And Complexity To The Contract To Be Bid. The Statement Shall Include, For Each Contract, The Following: (a) Name Of The Contract; (b) Date Of The Contract, (c) Kind Of Goods, (d) Amount Of And Value Of Awarded And Completed Contracts, (e) Date Of Delivery, (f) End User’s Acceptance And Or Official Receipt(s) Issued For The Contract Supported By Notice Of Award, Notice To Proceed, Contract/ Purchase Order, Certificate Of Completion And Certificate Of Acceptance.(latest) Financial Documents 4 The Prospective Bidder’s Latest Computation For Its Net Financial Contracting Capacity (nfcc) Which Must Be At Least Equal To The Abc To Be Bid. (latest) Or A Committed Line Of Credit From Universal Or Commercial Bank (not Applicable To Procurement Of Infrastructure Projects). Class “b” Documents 5 If Applicable, A Valid Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence, Or, In Lieu Thereof, A Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful Shall Be Included In The Bid . (latest) Technical Documents 1 2 Bid Security In The Prescribed Form, Amount And Validity Period And In Accordance With Itb Clause 18. Statement Of Compliance To The Schedule Of Requirements 3 4 Statement Of Compliance To Technical Specifications Taking Into Consideration The Notations Stated In Section Vii Of The Bidding Documents. Authority Of The Signatory 5 Sworn Statement By The Prospective Bidder Or Its Duly Authorized Representative In Accordance With Section 25.2(b)(iv) Of The Revised Irr Of Ra 9184 And As Indicated In The Omnibus Sworn Statement Of The Bidding Documents Using The Prescribed Form Issued By The Gppb. (latest) Note: Any Missing Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid Second Envelope Financial Documents 1 Financial Bid Form Which Includes Bid Prices And The Bill Of Quantities And The Applicable Price Schedules, In Accordance With Itb Clauses 15.1 And 15.4 And The Issued Form In Section Viii Of The Bidding Documents. 2 If A Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti (if A Bidder Is A Sole Proprietor), By Sec (if Bidder Is A Partnership, Or A Corporation); And Cda (if Bidder Is A Cooperative)issued In Accordance With Itb Clause 27, If Applicable, That: A) Sole Proprietor Is A Citizen Of The Philippines, Corporation, Cooperative, Or Association Is A Duly Organized Under The Laws Of The Philippines With At Least Seventy Five (75%) Of Its Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines; B) Habitually Established In Business And Habitually Engaged In The Manufacturing Or Sale Of The Merchandise Covered By His Bid, And C) The Business Has Been In Existence For At Least Five (5) Consecutive Years Prior To The Advertisement And/or The Invitation To Bid.

Details: Krakow, 14/11/2024 Price Request No. Ag.b.0162.1.2024.261.ts "replacement of an external window in the Police Station building in Gródek nad Dunajcem" The procedure is conducted on the basis of Art. 2 Section 1 Point 1 of the Act of 11 September 2019, as amended - Public Procurement Law - hereinafter referred to as the Act, and in accordance with Decision No. 58/2021 of the Provincial Police Commander in Krakow General Information The offer should be sent by: 18/11/2024, 12:00 p.m. Please submit offers and any inquiries by 18.11.2024, 12:00 PM via the Purchasing Platform at: https://malopolska-policja.eb2b.com.pl, "proceedings" tab À "list of open proceedings". In the event of problems with submitting an offer, please contact the Eb2b Helpdesk Department - Contact in the footer of the website. The offer should be prepared in accordance with this inquiry. 1. Description of the Subject of the Order: The Subject of the Order is - Replacement of 1 PVC Window with Dimensions of Approx. 130 X 170 Cm., Single-leaf - with a Heat Transfer Coefficient for the Entire Window (Glass + Frame and PVC Frame Construction) Uw = 0.9 Works to be Performed: - Dismantling of the Existing Window, - Installing a 130 X 170 Cm PVC Window, with Uw Coefficient = 0.9 for the Entire Window (Glass, Frames, Jambs) - Making External and Internal Linings, - Making Muntins on the Glass (Division into 6 Fields) - Painting the Walls and Ceilings of the Staircase with Emulsion Paint Possibility of On-Site Inspection After Arranging an Appointment by Phone at 665 390 452, 47 83 54 904, Or 602 810 551. The given dimensions of the window constitute an indicative scope of works. Before the window is made, the bidder should update the measurements during an on-site inspection. 2. Conditions concerning the offer and execution of the order: 1. Required guarantee for the work performed - 36 months. 2. Payment will be made within 30 days from the date of receipt of a correctly issued invoice - by transfer to the account indicated by the contractor. Deadline for execution of the order: Until December 2, 2024. Place of execution of the order: Police station in Gródek nad Dunajcem 57. Criteria for examination, evaluation and selection of offers: The most favorable price for execution of the order. Attachments: 1. Offer template 2. Bill of quantities (indicative)

Details: Description Invitation To Bid For Fy 2024 Procurement And Delivery Of Learning Tools And Equipment For Technical Vocational Livelihood (tvl) Project Identification No.: Pb-albaygoods-24-23 1. The Department Of Education, Schools Division Office Of Albay, Through The General Appropriations Act Of 2024 Intends To Apply The Sum Of Philippine Pesos Twenty Two Million Six Hundred Twenty Three Thousand Nine (php 22,623,009.00) Only Being The Abc As Payment For The Above-mentioned Contract. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Unit Of Measure Quantity Item Description Estimated Unit Cost (php) Estimated Cost (php) Fy 2024 Procurement And Delivery Of Learning Tools And Equipment For Technical Vocational Livelihood (tvl) 19 Pc Air Compressor With Airbrush Cake Decorating Set. Type L Single Cylinder Piston Compressor Body Shape : Cylindrical In Shape Material: Copper, Aluminum Dimension: (l X W X H) 24 Cm X 13 Cm X 17 Cm (minimum) Power Source: 220 Volts Ac, 60 Hz With Power Cord 1.5 Meters Long Minimum With Attachment Standard Male Plug Type A Or Provide An Adopter Plug Power Rating : 1/6 Hp Motor Capacity: Air Pressure Adjustment Range 0 To 57 Psi. Automatic On/off Shutoff Compressor Must Have Oil Filter, Water Trap Filter, Pressure Regulator With Gauge, And With Mounted Airbrush Holder And With Built In Cooling Fans Airbrush Specifications: A) Airbrush Material: Stainless Steel Body; B) Needle Dia.: 0.3 Mm. C) Cup Capacity: 2 Cc (cubic Centimeter); D) Airbrush With A 1/3 Oz. Gravity Fluid Cup; E) Nozzle That Allow To Spray From Hairline Up To 1 1/2 Inches Wide; F) Operating Pressure: 15-57 Psi. G) Rubber Hose Length: 2-meter (minimum) H.) Air Flow: 20 Liters/min. Package Content; 1 Pc Air Compressor, 1 Set Air Brush Kit With Case, 5 Ft- Rubber/vinyl Hose, 5 Pcs Cleaning Brushes In Different Width, Tools And User’s Manual. Comes With User's Manual That Content: Operation Guide, Maintenance/ Troubleshooting Procedure And List Of Parts. 10,000.02 190,000.38 114 Pc Beater. Body Shape: Circular Handheld Mixer Materials: Stainless Steel With Plastic Grip Dimension: L-28 Cm X Width-7 Cm (minimum) Twin Beater Designed For Mixing Preferably With Packing Case Smooth Motion Gear And Durable Mechanism Dishwasher Safe And Rust Free 475.00 54,150.00 114 Set Board, Chopping, 6 Color. Type: Food Grade Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, 3,300.00 376,200.00 19 Pc Boiler, Double. Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges 2,465.00 46,835.00 228 Set Bowl, Mixing (6 Pcs/set). Type: Mixing Bowl Set Body Shape: Round Material: Stainless Steel, 0.8 Mm - 1.0 Mm Thick Each Set Must Consist Of The Following Capacities 1 Pc - 0.70 Liter 1 Pc - 1.5 Liters 1 Pc - 3 Liters 1pc - 4 Liters 1pc - 5 Liters 1pc - 8 Liters Light Weight And Easy To Use, Flat Base, Curved Lip Preferably With Packing Case. Dishwasher Safe. 2,440.00 556,320.00 114 Set Cake Pans, Round #4, #6, #8, #10, #12, #14, #16. Type: Round Pan Body Shape: Round Material: Anodized Aluminum Thickness: 1.29 Mm Thick (minimum) Depth: 2 Inches (50.8 Mm) (minimum) Set Must Each Contain The Following Diameter: 1 Pc - 6 Inches (152.4 Mm) Diameter (minimum) 1 Pc - 8 Inches (203.2 Mm) Diameter (minimum) 1 Pc - 10 Inches (254 Mm) Diameter (minimum) 1 Pc - 12 Inches (304.8 Mm)diameter (minimum) 1 Pc - 14 Inches (355.6 Mm) Diameter (minimum) 1 Pc - 16 Inches (406.4 Mm) Diameter (minimum) Preferably Packed (6 Pcs Per Set) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges The Materials Used Must Be Non-toxic. 3,650.00 416,100.00 114 Pc Cake Stand, With Tier. - Circular With 3 Tier. Hard Plastic, Polypropylene, 4 Mm Thick. The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) 3,047.33 347,395.62 57 Pc Cake Turn Table. Material: Cast Aluminum Plate And Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum)base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm 2,500.00 142,500.00 247 Pc Coupler. Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case 265.00 65,455.00 228 Pc Cup, Measuring (for Solid). Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 575.00 131,100.00 228 Pc Cup, Measuring, 250 Ml For Liquid. Type: Clear Glass Cup Body Shape: Round Material: Clear, Non-porous Tempered Glass Capacity: 250 Ml (with 10 Ml Or 50 Ml Increments) With Permanent Graduation Markings Specified Metric And English System Of Measurement With Handle & Spout For Easy Pouring Preferably With Packing Case Food Grade And Safe Use To Microwave, Freezer And Dishwasher 885.00 201,780.00 228 Pc Cup, Measuring, 500ml For Liquid. Type: Clear Glass Cup Body Shape: Round Material: Clear, Non-porous Tempered Glass Capacity: 500 Ml (with 10 Ml Or 50 Ml Increments) With Permanent Graduation Markings Specified Metric And English System Of Measurement With Handle & Spout For Easy Pouring Preferably With Packing Case Food Grade And Safe Use To Microwave, Freeze And Dishwasher 1,150.00 262,200.00 19 Pc Cutter, Dough. Type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage 620.00 11,780.00 114 Pc Cutter, Pie. Type: Pie Cutter Wheel Knife Body Shape: Round Wheel Roller Material: Stailess Steel Overall Length: 19.5 Cm (minimum) Wheel Diameter: 6.5 Cm (minimum) With Hanging Hook At The Tip Of The Handle For Hanging Storage High Quality Food Grade Stainless Steel, High Strength, Good Hardness Preferably With Packing Case Comes With Finger Protection And Not Easily Deformed, Anti-corrosion. Dishwasher Safe. 620.00 70,680.00 114 Pc Flour Sifter, Hand Cranked. Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case. Dishwasher Safe. 500.00 57,000.00 114 Pc Grater. Type: Four-sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case. Food Grade & Dishwashing Safe 350.00 39,900.00 114 Pc Knife, Kitchen. Blade Material: Stainless Steel 316. Must Be Branded. 500.00 57,000.00 114 Pc Knife, Pallet. Type: Pallete Knife Body Shape: Offset Blade Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Overall Length: 30.5 Cm - 35.6 Cm Total Length: Blade Dimension: Length- 17 Cm X Width-3.8 Cm (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Preferably With Packing Case Dishwasher Safe. Must Be Branded. 450.00 51,300.00 114 Pc Ladle, 3 Oz. Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 300.00 34,200.00 114 Pc Loaf Pan, Big. Type: Loaf Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm - 2 Mm Length: 25.4 Cm (minimum) Width: 12.7 Cm (minimum) Depth: 7.62 Cm (minimum) Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade And Oven Safe. Must Be Branded. 700.00 79,800.00 114 Pc Loaf Pan, Medium. Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm - 2 Mm Length: 22.86 Cm (minimum) Width: 11.43 Cm (minimum) Depth: 6.9 Cm (minimum) Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade & Oven Safe. Must Be Branded. 650.00 74,100.00 114 Pc Loaf Pan, Small. Type: Loaf Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm - 2 Mm Length: 17.78 Cm (minimum) Width: 7.62 Cm (minimum) Depth: 5.48 Cm (minimum) Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade And Oven Safe Must Be Branded. 600.00 68,400.00 114 Pc Muffin Pan, Big. Type: Muffin Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm (minimum) Dimension: Length-36.6 Cm X Width-22.9 Cm X Height-7.6 Cm (minimum) Cup Size: Height- 8.2 Cm X Diameter 8.9 Cm (minimum) Number Of Cups In A Tray: 6 Cup Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade. Must Be Branded. 800.00 91,200.00 114 Pc Muffin Pan, Medium. Type: Muffin Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm (minimum) Dimension: Length-40 Cm X Width-27.9 Cm X Height-2.8 Cm (minimum) Cup Size: Heigth-5.2 Cm X Diameter 6.9 Cm (minimum) Number Of Cups In A Tray: 12 Cup Preferably With Packing Case. Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade. Must Be Branded. 700.00 79,800.00 114 Pc Muffin Pan, Small. Type: Muffin Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm (minimum) Dimension: Length 40.6 Cm X Width-25.4 Cm X Height 2.8 Cm (minimum) Cup Size: Heigth-2.5 Cm X Diameter 3.8 Cm (minimum) Number Of Cups In A Tray: 24 Cup Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade. Must Be Branded. 600.00 68,400.00 114 Pc Pie Pan, 10 Inches Diameter. Type: Pie Pan Body Shape: Round Material: Aluminum, 0.81 Mm Thick (minimum) Diameter -10 Inches (254 Mm) Minimum Depth: 1.25 Inches (31.75 Mm) Minimum Coated With Non-stick Coating Materials Preferably With Packing Case Oven Safe To 500°f / 260°c Food Grade Smooth Finish Surfaces Without Sharp Edges Extended Sides For An Easy Grip. Must Be Branded. 525.00 59,850.00 114 Set Pie Pan, #6, #8, #10 (set). Type Pie Pan Body Shape: Round Material: Aluminum, 0.81 Mm Thick (minimum) 1) # 10 Diameter: 10 Inches (254 Mm) Minimum 2) # 8 Diameter: 8 Inches(203 Mm) Minimum) 3) #6 Diameter: 6 Inches (152 Mm) Minimum Depth: 1.5 Inches (38.1 Mm) Minimum Oven Safe To 500°f / 260°c Coated With Non-stick Coating Materials Preferably With Packing Case Food Grade Smooth Finish Surfaces Without Sharp Edges Extended Sides For An Easy Grip. Must Be Branded. 850.00 96,900.00 114 Pc Pillars, Cake. Type: Cake Pillars, Food Grade Body Shape: Tubular Material: Crystal Clear Fiber Plastic Tube Diameter: 2.5 Cm (minimum) Base And Top Diameter: 3.5 Cm (minimum) Height: 13 Cm (minimum). Packed In Four (4) Pcs Per Set The Materials Used Must Be Non-toxic. Must Be Branded 400.00 45,600.00 76 Pc Rectangular Pan, 1 X 8. Type: Rectangular Pan Body Shape: Square Inn Shape Material: Anodized Aluminum Thickness: 1.63 Mm Thick, Minimum Dimensions: Length- 8 Inches X Width- 8 Inches X Height- 1 Inch (minimum) Oven Safe To 500°f / 260°c Preferably With Packing Case Food Grade And Dishwasher Safe. Must Be Branded. 450.00 34,200.00 114 Pc Rolling Pins. Type: Rolling Pins Body Shape: Tubular In Shape Material: Hardwood (solid Wood In Natural Color) Roller Dimensions: 2.5 Inches Diameter X 9.5 Inches Length (minimum) Handle Dimension: 1 Inch Diameter X 4 Inches Length (minimum) Overall Length: 17.5 Inches (minimum) The Wood Rolling Pin Boasts Rust Proof Nylon Bearings For Smooth Rolling Action Smooth Rotation Of The Revolving Barrel Preferably With Packing Case Smooth Surface Finish With No Sharp Edges Materials Used Must Be Food Grade. Must Be Branded 350.00 39,900.00 114 Pc Rubber Scraper. Type: Rubber Scraper Body Shape: Flat Material: Silicone Blade (head) & Plastic Handle (polypropylene) Color: Any Color Head Length: 11.5 Cm (minimum) Head Width: 7.0 Cm (minimum) Handle Length: 24 Cm To 30 Cm Preferably With Packing Case Safe Working Temperature: -40°f To 446°f The Materials Used Must Be Non-toxic. Must Be Branded 320.00 36,480.00 114 Pc Sauce Pan. Type: Sauce Pan Body Shape: Round In Shape Material: Stainless Steel With Aluminum Core Dimension: Diameter- 16 Cm X Height-8 Cm (minimum) Thickness: 1.8 Mm Thick (minimum) Riveted Stainless Steel Handle Length: 15 Cm (minimum) Capacity: 1 Quart (minimum) Preferably With Packing Case With Stainless Steel Cover, Safe For The Stove, Oven, Broiler And Dishwasher Safe The Materials Used Must Be Non-toxic. Must Be Branded 750.00 85,500.00 114 Pc Sheet Pan. Type: Sheet Pan Body Type: Rectangular Material: Aluminum Thickness: 0.91 Mm Thick (minimum) Dimension: Length-22 Inches X Width-16 Inches X Height-1 Inch (minimum) Preferably With Packing Case Smooth Finish Surfaces Without Sharp Edges Corrosion Resistant Superior Heat Conduction Oven Safe To 500°f / 260°c (maximum) Food Grade Must Be Branded. 350.00 39,900.00 475 Set Spoon, Measuring (set). Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 335.00 159,125.00 114 Pc Spoon, Wooden. Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges Handle With Provision For Hanging Storage Purposes Must Be Branded 265.00 30,210.00 114 Pc Strainer. Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 450.00 51,300.00 380 Pc Tip, Decorating. Type: Tube Tips Body Shape: Nozzles With Different Shape Material: Stainless Steel Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Roping, Stars, Leaves And Other Designs Comes With 24 Different Shapes Of Nozzles Packed In Plastic Storage Box 895.00 340,100.00 114 Pc Weighing Scale, 10 Kgs. Must Be Branded. 1,632.00 186,048.00 114 Pc Weighing Scale, 5kgs Digital. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service). Must Be Branded 890.00 101,460.00 114 Pc Wire Whisk, Medium. Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 500.00 57,000.00 24 Pc Apple Corer. Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case. Dishwasher Safe. 350.00 8,400.00 12 Pc Bain Marie, Table. (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 16,000.00 192,000.00 8 Pc Blender, Electric. Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 5,000.00 40,000.00 64 Pc Board, Chopping/cutting, Plastic. Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 400.00 25,600.00 8 Pc Boiler, Double. Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 2,465.00 19,720.00 32 Pc Braising Pan, Medium. Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 1,980.00 63,360.00 12 Pc Can Opener. Type: Can Opener Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs 300.00 3,600.00 24 Pc Casserole, Medium. Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case 1,320.00 31,680.00 48 Pc Casserole, Small. Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 300.00 14,400.00 16 Pc Colander, Medium. Type: Colander, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm 1,225.00 19,600.00 16 Pc Colander, Small. Type: Colander (small) Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case. Food Grade And Dishwasher Safe 1,058.00 16,928.00 32 Set Cup, Measuring (for Solid) (set). Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 545.00 17,440.00 16 Pc Dispenser, Paper Towel. Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 978.00 15,648.00 12 Pc Fan, Electric. Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase, Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings, Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English 2,655.00 31,860.00 8 Pc Fire Extinguisher (with Contents). 1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 2,600.00 20,800.00 8 Pc Fish Poacher, Medium. Type: Fish Poacher Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 2,500.00 20,000.00 16 Pc Fork, Carving. Body Shape: Square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle. Preferably With Packing Case 585.00 9,360.00 32 Pc Fork, Kitchen (pcs). Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End 300.00 9,600.00 16 Pc Frying Pan, Large. Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 20 Cm Long (minimum) Preferably With A Packing Case, Oven Safe Up To 250⁰f 878.00 14,048.00 32 Pc Frying Pan, Medium. Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 735.00 23,520.00 48 Pc Frying Pan, Small. Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 625.00 30,000.00 16 Pc Funnel, S/s, Medium. Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 245.00 3,920.00 16 Pc Funnel, S/s, Small. Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case. Dishwasher Safe 185.00 2,960.00 16 Pc Garbage Bin. Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color 685.00 10,960.00 48 Pc Glass Rack. Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack, Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 2,980.00 143,040.00 8 Pc Ice Cream Scooper. Type: Ice Cream Scooper Body Shape: Round Material: Stainless Steel Scoop: Diameter- 5 Cm X Deep-2.5 Cm (minimum) Handle Length: 10 To 12 Cm 265.00 2,120.00 32 Pc Knife, Boning. Type: Flexible Boning Knife Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably With Packing Case, Dishwasher Safe 462.00 14,784.00 40 Pc Knife, Chef. Type: Chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 592.00 23,680.00 12 Pc Knife, Cleaver. Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets 1,495.00 17,940.00 16 Pc Knife, Oyster. Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 335.00 5,360.00 8 Pc Light, Emergency. Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 2,850.00 22,800.00 8 Pc Meat Slicer, Small. Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug, Adopter 10a/220v 15,242.00 121,936.00 32 Pc Pastry Tube. Body Shape: Tube In Different Shape Of Nozzles Material: Stainless Steel Set Contain: 24 Different Shapes Of Nozzles (minimum) Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Stars, Leaves And Other Designs 168.00 5,376.00 32 Pc Peeler, Y-type. Body Shape: Ergonomic, Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 295.00 9,440.00 32 Pc Pepper And Salt Mill. Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism, Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case 500.00 16,000.00 32 Pc Piping Bag (packs). Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 265.00 8,480.00 48 Pc Plate Rack. Type: Plate Rack Body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 4,890.00 234,720.00 24 Pc Preparation Table With Sink. Type: Preparation Table With Sink & Shelves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 20,000.00 480,000.00 8 Pc Pressure Cooker. Type: Pressure Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 4,760.00 38,080.00 16 Pc Roasting Pan. Type: Roasting Pan Body Shape: Rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 1,400.00 22,400.00 32 Pc Scissors, Kitchen. Type: Kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 250.00 8,000.00 32 Pc Siever, Small. Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 475.00 15,200.00 32 Pc Skimmer, Fine. Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 140.00 4,480.00 32 Pc Skimmer, Spider. Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe 435.00 13,920.00 48 Pc Soup Cup Rack. Type: Soup Cup Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 2,000.00 96,000.00 32 Pc Soup Ladle, 3oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case, Dishwasher Safe 250.00 8,000.00 32 Pc Soup Ladle, 6oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case. Dishwasher Safe. 290.00 9,280.00 16 Pc Soup Ladle, 8oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 350.00 5,600.00 16 Pc Soup Ladle, 12oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case. Dishwasher Safe. 400.00 6,400.00 32 Pc Spatula. Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 365.00 11,680.00 32 Pc Spoon, Kitchen. Type: Kitchen Spoon Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe. Must Be Branded. 300.00 9,600.00 32 Pc Spoon, Kitchen (slotted). Type: Kitchen Spoon Slotted. Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots. Preferably With A Packing Case Heat Resistant Up To 220 ° C. Dishwasher Safe 425.00 13,600.00 32 Set Spoon, Measuring (set). Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 335.00 10,720.00 32 Pc Spoon, Parisienne. Type: Parisiennes Spoon Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 345.00 11,040.00 96 Pc Spoon, Serving. Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 200.00 19,200.00 32 Pc Spoon, Wooden. Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 300.00 9,600.00 16 Pc Stock Pot, Large. Type: Stock Pot, Large Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum 3,590.00 57,440.00 16 Pc Strainer, Chinois, Medium. Type: Strainer Chinois, Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 735.00 11,760.00 16 Pc Strainer, Chinois, Small. Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 675.00 10,800.00 32 Pc Strainer Medium, Fine. Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 465.00 14,880.00 32 Pc Strainer Small, Fine. Type: Strainer, Small Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe. Must Be Branded 325.00 10,400.00 20 Pc Table, Working. Type: Working Table, Stainless Steel. Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces. Must Be Branded. 19,500.00 390,000.00 32 Pc Tenderizer, Medium. Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes, Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe. Must Be Branded 315.00 10,080.00 16 Pc Thermometer, Pocket/pin. Type: Pocket/pen Thermometer Body Shape: Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f 600.00 9,600.00 32 Pc Tong, 12 Inches. Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe. Must Be Branded 320.00 10,240.00 40 Pc Tong, 8 Inches. Body Shape: Standard Material: Stainless Steel,size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case. Food Grade And Dishwasher-safe 250.00 10,000.00 32 Pc Tray, Baking, Small. Type: Baking Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Preferably With Packing Case Dishwasher Safe. Must Be Branded 556.00 17,792.00 48 Pc Tray, Utility. Type: Utility Tray Body Shape: Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Finish: Polished. Preferably With A Packing Case. Washable And Oven Safe 485.00 23,280.00 32 Pc Turner 3" X 6. Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe. Must Be Branded 398.00 12,736.00 8 Pc Utility Cart. Body Shape: Rectangular Material: Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Preferably With A Packing Case Easy Grip Handles On Each End Of Cart 5,000.00 40,000.00 16 Pc Weighing Scale, 1 Kg Digital. Type: Digital Weighing Scale, Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate, Capacity: 1 Kg, Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits, Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 720.00 11,520.00 8 Pc Weighing Scale, 5 Kilograms, Mechanical. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 1,540.00 12,320.00 32 Pc Wire Skimmer, Small. Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging. Preferably With A Packing Case. Dishwashing Safe. Must Be Branded. 295.00 9,440.00 16 Pc Wire Whisk, Heavy Duty. Type: Wire Whisk, Heavy Duty. Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 335.00 5,360.00 32 Pc Wire Whisk, Medium. Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded 425.00 13,600.00 32 Pc Wire Whisk, Small. Type: Wire Whisk, Small Body Shape: Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 385.00 12,320.00 8 Pc Wok, Medium. Body Shape: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom. Preferably With A Packing Case Dishwashing Safe. Must Be Branded 1,950.00 15,600.00 16 Pc Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom. Preferably With A Packing Case Dishwashing Safe. Must Be Branded 1,650.00 26,400.00 32 Pc Zester. Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle. Preferably With A Packing Case Dishwasher Safe. The Plastic Material Used Must Be Non-toxic. Must Be Branded. 390.00 12,480.00 768 Pc Chair, Dining. Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality. 2,200.10 1,689,676.80 32 Pc Coffee Pot, 2 Pints. Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box. The Item Must Have Good Quality 1,156.00 36,992.00 80 Pc Container, Creamer. Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height : 80 – 105 Mm Color: White Appearance : Glossy White Packed In Carton Box. The Item Must Have Good Quality 328.00 26,240.00 384 Pc Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 285.00 109,440.00 384 Pc Fork, Cocktail. 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 195.00 74,880.00 384 Pc Fork, Dessert. Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mm Width : 20 - 30 Mm Handle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 195.00 74,880.00 384 Pc Fork, Dinner. Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver, Packed In Plastic Pouch The Item Must Be Of Good Quality 185.00 71,040.00 384 Pc Fork, Fish. Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mm Handle Thickness : 2 Mm - 3 Mm Color : Silver. Packed In Plastic Pouch. The Item Must Be Of Good Quality 195.00 74,880.00 384 Pc Fork, Oyster. Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 225.00 86,400.00 384 Pc Glass, Champagne Flute. Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 170.00 65,280.00 384 Pc Glass, Collins. Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 102.00 39,168.00 384 Pc Glass, Juice/ Hi-ball. 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Dishwasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 115.00 44,160.00 384 Pc Glass, Pilsner (ice Tea Glass). Type: Flaired Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass : 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality 120.00 46,080.00 384 Pc Glass, Red Wine. Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 300.00 115,200.00 384 Pc Glass, White Whine. Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 300.00 115,200.00 96 Pc Gravy Boats. Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 560.00 53,760.00 64 Pc Ice Bucket, 2 Liters With Tongs. Type: Steel Type, Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 496.00 31,744.00 384 Pc Knife, Butter. 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 180.00 69,120.00 384 Pc Knife, Dinner. Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mm Handle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 180.00 69,120.00 384 Pc Knife, Fish. Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver, Packed In Carton Box The Item Must Have Good Quality 180.00 69,120.00 64 Pc Folder, Menu. Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 234.00 14,976.00 96 Pc Napkin Holder. Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 350.00 33,600.00 64 Pc Order Pads. Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 85.00 5,440.00 64 Pc Pepper And Salt Mill. Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic. Must Be Branded 500.00 32,000.00 128 Pc Plate Covers. Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle, Packed In Plastic Pouch The Item Must Have Good Quality 600.00 76,800.00 384 Pc Plate, Dessert, 7" To 8" . Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box, The Item Must Have Good Quality 225.00 86,400.00 384 Pc Plate, Dinner, 10". Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 265.00 101,760.00 384 Pc Plate, Fish, 8" To 9" . Type: Plain Type, Body Shape: Circular, Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White, Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 225.00 86,400.00 128 Pc Table, Round (8's). Type: Foldable Body Shape: Round Material: High Density Polyethylene Table Top Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box. The Item Must Have Good Quality 6,500.00 832,000.00 384 Pc Fork, Salad. Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4tines, Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Item Must Be Of Good Quality. 125.00 48,000.00 384 Pc Knife, Salad. Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 125.00 48,000.00 384 Pc Salad Plates 7" To 8" . Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box. The Item Must Have Good Quality 215.00 82,560.00 64 Pc Salt And Pepper Shakers. Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm, Width: 50 -60 Mm Aluminum Cover. Packed In Carton Box The Item Must Have Good Quality 550.00 35,200.00 64 Pc Sauce Ladles. Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick, Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe. Packed In Plastic Pouch The Item Must Have Good Quality 395.00 25,280.00 64 Pc Server, Cake. 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 367.00 23,488.00 192 Pc Service Forks. Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines, Color: Silver. Packed In Plastic Pouch 125.00 24,000.00 192 Pc Service Tray. Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any, Packed In Plastic Pouch The Item Must Have Good Quality 628.00 120,576.00 192 Pc Show/service/base Plates 11" To 14" . Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White. Diameter, Inner : 225 Mm - 250 Mm Thickness: 3mm - 6 Mm. Smooth And Glossy Surfaces 574.00 110,208.00 384 Pc Side Plates Or Bread Plates 6" .type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box. The Item Must Have Good Quality 135.00 51,840.00 192 Pc Side Towels. Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch. The Item Must Have Good Quality 280.00 53,760.00 192 Pc Silver Platter. Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 578.00 110,976.00 96 Pc Soup Ladle. Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 355.00 34,080.00 384 Pc Soup Bowl. Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 165.00 63,360.00 96 Pc Soup Tureen . Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 2,955.00 283,680.00 384 Pc Spoon, Dessert. Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver. Packed In Plastic Pouch The Item Must Have Good Quality 85.00 32,640.00 192 Pc Spoons, Service. Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver. Packed In Plastic Pouch The Item Must Have Good Quality 78.00 14,976.00 384 Pc Spoons, Soup (cream And Consume). Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver. Packed In Plastic Pouch 65.00 24,960.00 384 Pc Knife, Steak. Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 269.00 103,296.00 80 Pc Sugar Container. Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 250.00 20,000.00 128 Pc Table Cloth, 54 X 54 Inches. Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 1,729.00 221,312.00 640 Pc Table Napkins, Cloth, 16 X 16. Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 225.00 144,000.00 128 Pc Table Skirting Cloth 90" X 90" . Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 2,256.00 288,768.00 96 Pc Table, Square/rectangular (6's). Type: Foldable Plastic Body Shape: Square/rectangle Materia: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 6 Persons Packed In Carton Box The Item Must Have Good Quality 9,000.00 864,000.00 32 Pc Tea Pot, 2 Pints. Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 1,040.00 33,280.00 384 Pc Teaspoon. Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 85.00 32,640.00 32 Pc Tong, 8 Inches. Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe. Must Be Branded 324.00 10,368.00 64 Pc Tooth Pick Holder. Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 265.00 16,960.00 64 Pc Tray Stand. Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 3,850.00 246,400.00 64 Pc Tray, Bill Folders/change. 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 356.00 22,784.00 128 Pc Tray, Round (bar). Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 426.00 54,528.00 384 Pc Water Goblet. Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box 145.00 55,680.00 96 Pc Water Pitcher. Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 485.00 46,560.00 80 Pc Table, Working. Type: Working Table, Stainless Steel Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces Must Be Branded 19,500.04 1,560,003.20 36 Pc Body Brush, Prosthetic. Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm(minimum) With Wooden Handle" 480.00 17,280.00 36 Pc Bowl, Mixing, Plastic. Material: Plastic Inner Diameter: 10.5 Cm (minimum) Height: 6cm (minimum) Thickness Is 2mm (minimum) Any Color Non-toxic 250.00 9,000.00 18 Pc Bowl, Shampoo. Bowl Material: Abs Plastic With Adjustable Stand(height: 39 Inches To 54 Inches ) Minimum Bowl Dimensions: 19 Inches(l) X 20 Inches(w) X 10 Inches(h); With Sealed Foam Rubber Neck Rest For Shampoo Bowls With Hose Attachment Of 7 Ft. Long(minimum) Stainless Steel Frame. Portable Type. Packed With Shipping Carton Box. Branded 4,000.00 72,000.00 36 Box Box, Hairpin. Material: Metal Size: At Least 3.5 X 4.5 X 0.5 Inches With Ball Tips Packaging: 100 Pcs Per Box Color: Black Non-corrosive 200.00 7,200.00 36 Pc Brush, Applicator. Material: Plastic Non-toxic Size: Small=190mm Length Medium=270mm Large=300mm Handle Width:70mm (minimum) Width Of Tip: 80mm (minimum) With Hair Coloring Dyeing Board Packed With Plastic Pouch 250.00 9,000.00 36 Pc Brush, Hair. Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non-toxic Packed With Protective Carton Box 250.00 9,000.00 36 Pc Cap, Frosting, With Hook. Cap Material: Silicone Type: Reusable, Perforated Cap One Size Fits All Or At Least 31cm X 22cm With Pre-cut Tipping Guides With Bleed Proof Inner Liner With A Rounded Metal Hook To Pull Hair Through The Ready-made Perforations Packed With Plastic Pouch 350.00 12,600.00 36 Pc Cap, Heating. Waterproof Cloth Material. Cordless Type To Fit An Average Size Head (21-24 Inches) Stretch Up To 29 Inches Unisex Hair Care Treatment Styling Reversible And Reusable, Non-toxic Includes With User's Guide In English That Contains: A. Diagram Of The Parts With Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment D. Basic Troubleshooting And Maintenance Procedure 400.00 14,400.00 36 Pc Cape. Polyester Cloth Size: At Least 125 Cm X 140 Cm Hairstyling Type Non-toxic Packed With Plastic Pouch 220.00 7,920.00 36 Pc Chair, High. Bar Stool Material: Metal, Painted With Anti-rust Width Of The Chair :15 Inches Minimum Height :33 Inches (minimum) Synthetic Leather Seat Material Barstool Crown Back Type With Rubber Ring Of Barstool For Anti-skidding 6,000.00 216,000.00 36 Pc Chair, Hydraulic. Material: Metal Base Size: Length59 Cm, Width54 Cm, Height From 51-78cm Hydraulic Pump Can Be Up And Down By Pedaling Load Capacity:180kg Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable And 360' Rotation Hydraulic Pump Build In For Adjusting The Seating Height. With Footrest 8,000.00 288,000.00 36 Pc Clamp. Material: Plastic Overall Length: 9.5cm Thickness:10mm(minimum) Hairstyling Clamp Type 200.00 7,200.00 36 Box Clamp, Duck Bill. Material: Metal Length: 11 Cm (minimum) High Elasticity Stainless Steel Spring. Nonslip Handle Packed With Plastic Pouch Branded 200.00 7,200.00 18 Box Clipper, Hair. Body Material: Hard Plastic Blade Material: Carbon Steel Capacity:6 Watts (minimum) Complete With Blade Guard And 4 Comb Attachments (#1, #2, #3, #4) Motor: Magnetic Type, Corded,12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, With Complete Accessories Including The Cleaning Brush With Cord 2 Meters Length Minimum With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box. Branded 2,500.00 45,000.00 36 Pc Comb, Afro. Material: Plastic Size: Overall Length At Least 7 Inches Width: 3.25 Inches(minimum) Number Of Teeth: 12 Teeth (minimum); Teeth Height: 2.5 Inches Long (minimum) 200.00 7,200.00 36 Pc Comb, All Purpose. Material: Plastic Size#3 Or At Least 18 Cm Long (minimum) Has Both Fine And Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (minimum) Non-toxic. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Haircutting. Material: Hard Plastic Length Including The Handle:180mm (minimum) Width: 30mm (minimum) With Detachable Steel Blades And Blade Holder With Two Sides For Different Cuts With Extra Blades 200.00 7,200.00 36 Pc Comb, Large Toothed. Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length Non-toxic. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Tail. Material: Plastic Size : 8 Inches(l)minimum X 1 Inches (w) Minimum Tail Length: 4 Inches(minimum) Tooth Length: 3/4 Inch(minimum) Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Teasing. Material: Plastic With 2 Rows Of Teeth. 1st Row: Large Teeth With At Least 25 Mm Long 2nd Row: Small Teeth With At Least 19 Mm Long Over-all Comb Size: 20 Cm (l) Minimum X 3.8 Cm (w) Minimum. Non-toxic. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Wide Tooth. Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length 200.00 7,200.00 18 Box Crimpers. Power: 25 Watts(minimum) Size: At Least 38 Cm X 15.5 Cm X 9 Cm Maximum Temperature: 200 Degrees Centigrade With Variable Heat Setting. With On/off Switch Button Rated Voltage: 110 -230volts Ac With Power Cord With Plastic Handle 2,000.00 36,000.00 36 Pc Curling Iron. Ceramic Curling Iron Capacity: 65watts Voltage: 210-240volts Ac With Power Cord Barrel Size: 1 Inch (minimum) Adjustable Heat Setting With Maximum Temperature Of 200 Degrees, Centigrade Swivel Cord Up To 360 Degree 3,000.00 108,000.00 36 Pc Drip Pan. Material: Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8 Inch (minimum) Shallow Rectangular Type Packed With Carton Box 220.00 7,920.00 36 Pc Dryer, Hair. Power: 1000w Rated Voltage: 220vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm With Plastic Handle Design Packed With Carton Box With Styrofoam Holder With User's Manual In English 3,000.00 108,000.00 36 Box Gloves, Disposable. Material: Plastic Size: At Least 25cm X 23cm Packaging Is 100 Pcs Per Box 250.00 9,000.00 36 Box Gloves, Rubber. Size: Medium Thickness: 4 Mil Acid Resistant Packed With Plastic Pouch In Pairs. 250.00 9,000.00 36 Pc Gown, Smock. Material: Polyester Sizes: 1 Piece = Small Size, At Least (50 Inches X 56 Inches); 1 Piece= Medium Size, At Least (52 Inches X 58 Inches); 1 Piece= Large Size, At Least (54 Inches X 60 Inches); Packed With Plastic Pouch Per Size 250.00 9,000.00 36 Box Hairclips. Material: Metal Size: At Least 67mm X 19mm Non-corrosive Packed With Plastic Pouch 180.00 6,480.00 36 Pc Hairnet, Invisible. Material: Nylon Size: 55mm (minimum) Stretchable And Unisex Type Color: Black Non-toxic Packed With Plastic Pouch 180.00 6,480.00 36 Pc Headband. Size: 6 Inches (minimum) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable And Breathable 180.00 6,480.00 36 Pc Headband, Flannel. Flannel Cloth Size : At Least 45 Cm (unstretched Circumference) Width: 8 Cm (minimum) 180.00 6,480.00 36 Pc Infrared Iron. Material: Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (minimum) Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm Long (minimum) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit With Digital Temperature Control Safety Mode: Auto Shut Off After 60 Minutes; With Swivel Cord Comes With Storage Pouch. Branded 1,900.00 68,400.00 60 Pc Mirror, Hand. Mirror Size 15 Cm Diameter (minimum) Frame Thickness Including Mirror Glass: 6.5mm(minimum) Over-all Length With The Handle Is 20 Cm (minimum) Clear Mirror With No Distortion Frame And Handle Are Made Of Plastic Plane Mirror Type Packed With Carton Box With Styrofoam Protection 505.00 30,300.00 36 Pc Mirror, Modular. Mirror Type: Plain Mirror Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75 Cm X 65 Cm (minimum) Mirror Thickness: 6mm (minimum) 2,300.00 82,800.00 36 Pc Prong Clip, Double. Material: Steel Nickel Or Chrome Base Plated Size: 45 Mm Minimum Hairstyling Clip Type Packed With Plastic Handle 220.00 7,920.00 36 Pc Prong Clip, Single. Material: Steel, Plated Size: 55 Mm (minimum) Type: Single-prong Clip Packed With Plastic Pouch 220.00 7,920.00 36 Pc Razor, Straight. Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14 Cm X 2 Cm (minimum) When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Non-corrosive. Branded 300.00 10,800.00 36 Pc Roller Pins. Material: Metal Size: 60mm Long (minimum) Application: Hair Roller Pins Quantity By Dozen(12 Pieces) Non Corrosive. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Rollers, Jumbo. Material: Plastic Approximately 44mm In Diameter X 64mm Long 300.00 10,800.00 36 Pc Rollers, Large Sized. Material: Plastic Size: At Least 40mm Diameter X 60mm Long Hairstyling Type. Packed With Plastic Pouch 250.00 9,000.00 36 Pc Rollers, Medium Sized. Material: Plastic; Diameter: 38 Mm(minimum) Length: 58mm (minimum) Hairstyling Type. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Scissors, Cutting. Material:stainless Steel Total Length: 17cm (minimum) Blade Width At Least 10 Cm. Non Corrosive Packed With Plastic Pouch. Branded 500.00 18,000.00 36 Pc Scissors, Thinning. Blade Material: High Carbon Steel Blade Length At Least 6cm With Straight Blade Type Style: Right Handed Scissor Total Length At Least 17cm One Side Comb Cutter, Non Corrosive Packed With Plastic Pouch. Branded 500.00 18,000.00 36 Pc Scoop. Material: Plastic Capacity:1/2 Cup (minimum) Rounded Edges With Handle Thickness: 1.5 Mm (minimum) 350.00 12,600.00 36 Pc Shower Cap. Material: Plastic Size: One Size Fits All Or 30cm Reusable And Waterproof Packed With Plastic Pouch 220.00 7,920.00 36 Pc Spatula. Material: Plastic Dimension: Over-all Length Of 7.5 Cm Long, X 1.5 Cm Wide (minimum) Application: Hair Waxing Removal Packed With Plastic Pouch 200.00 7,200.00 36 Pc Spray Gun. Material: Transparent Plastic Capacity: 300ml (minimum) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7 Cm And The Height Is 17cm 220.00 7,920.00 36 Pc Steamer, Hair. Power 450 Watts (minimum) Rating Is 220 Volts/50-60hz Hood Material: Polycarbonate Hood Has At Least 30 Cm Diameter Opening X 25 Cm Deep Timer Setting Is Up To 60 Minutes With At Least 32 Ounce Water Reservoir Adjustable Height From 100 To 150cm With At Least 5 Swivel Caster With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures. Branded 6,500.00 234,000.00 36 Pc Stool. Material: Metal, Electroplated Load Capacity: 150kg Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely. With Thick Sponge Cushion. With At Least Four Caster Wheels. With Thick Sponge Cushion. Swivel Stool With Backrest No Sharp Edges. Branded 8,500.00 306,000.00 21 Pc Dummy, Anatomical. 1. Half Life-size Muscular Figure Measures 32" Tall (minimum). 2. This Model Features 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks. 3. It Shows The Muscular System With Numbered Parts That Comes With A Corresponding Key. 4. It Has Removable Arms, A Removable Calvarium, And A Removable Chest Plate That Hides The Individual Numbered Organs Of The Digestive System 5. Detachable Muscles Include: Deltoid, Brachioradialis With Extensor Carpi Radialis Longus And Brevis, Biceps Brachii, Pronator Teres With Palmaris Longus And Flexor Carpi Radialis, Sartorius Muscle, Rectus Femoris, Extensor Digitorum Longus, Tensor Faciae Latae, Gluteus Maximus, Biceps Femoris, Semitendinosus, Gastrocnemius, Soleus. 6. Removable Organs Include: Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach 7. Base Is 13" X 9" (removable) 8. Weighs 12 Lbs. (approximately) 9. Plastic Material 10. Non-toxic Material 11. Carton Box Packaging 6,000.00 126,000.00 35 Pc Massage Bed / Table. Materials: Hard Wood With Steel Bracings, Hardwood Frame, Marine Plywood Deck; Color: Black Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in. Leg Thickness - 35mm (minimum) Cushion System: High Density Foam (7.5 Cm / 2.95") Minimum With Pu Leather Cover (1mm Thick) Finishing: Round Corner Weight Capacity: 250 Kg(minimum) Gross Weight: 21 Kg (approximate) 2 End Support Bearer To Strengthen The Base And Increase Weight Capacity Accessories - Aluminum Headrest (adjustable) + Face Plug + Armrest + Arm Sling + Carry Case. Portable And Foldable 15,000.00 525,000.00 35 Pc Massage Chair. Ii 1. Padded With 3" Thick, High-density, Small-cell Foam 2. Size: 14"-diameter Seat (minimum) But Without Back And Arm Rest, With Metal Post And Hard Plastic Star. 3. Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever 4. Five Heavy-duty, Smooth-rolling Wheels 5. Load Capacity: 265 Lbs / 120 Kg (maximum) 6. Smooth Surface And No Sharp Edges 7. Any Color With One Color Only For Whole Lot 5,000.00 175,000.00 35 Pc Sphygmomanometer. Aneroid Type; (for Adult Use) Large Cuff Sizes: 33 To 42 Cm Arm Diameters Accuracy: ±3mm Hg; Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure Inflation System Is Latex Free And Has An Easy-release Deflation Valve Chrome-plated Brass Air Release Valve; Set Includes: 1 Unit Sphygmomanometer; 1 Zippered Nylon Carrying Case Smooth Surface And Edges, Non-toxic Material 2,500.00 87,500.00 35 Pc Stethoscope. Chest-piece Description: Stainless Steel Double Chest Piece Color: Black Tubing Description: Y-tube Pvc Uses Extra Soft Replaceable And Pivotable Ear Tips The Binaural Is Chromium-plated Chest-piece Diameter: 44 Mm (minimum) And Has Non-chill Rim Overall Length: 29" /74 Cm (minimum) The Stethoscope Is Latex-free Comes With A Pair Of Replacement Ear Tips, A Replacement Membrane, And A Name Plate Smooth Surface And No Sharp Edges 6,829.20 239,022.00 21 Pc Talking Sphygmomanometer. Type: Arm Type Blood Pressure Monitor (talking English), Nylon Cuff Sizes: 33 To 42 Cm Arm Dia. Lcd Digital Display: Systolic, Diastolic, Pulse Rate With Real Voice, Loud And Clear, Announcing Blood Pressure Automatically When Reading Is Detected And Displayed Simultaneously Dimensions: 98mm*126mm*60mm (approximate) Hard Plastic Casing, Smooth Surface And No Sharp Edges, Non-toxic Materials Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Weight: 450g (approximate) Pressure Measurement Range: 20~280mmhg(0.4kpa-37.3kpa) Pressure Accuracy: ±3mmhg(±0.4kpa) Pulse Measurement Range: 40 ~199 Beats /min Voltage: 4*aaa Alkaline Batteries Or Power Adapter Certificate: Ce Rohs Intelligent Automatic Pressurization And Decompression Incorrect Prompting Function Automatic Shutdown: 1 Min After Last Operation Carton Box Packaging 3,500.00 73,500.00 21 Pc Talking Thermometer. Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice (loud And Clear In English) Announces Temperature Automatically When Reading Is Detected Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches (not Including Probe) / 51 (w) X 110 (h) X 30 (d) Mms (not Including Probe) Choices In Degrees Celsius Or Fahrenheit Talk Button Repeats Last Temperature Reading Last Reading Memory Auto Switch Off Accessories: Protective Case, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 2,599.00 54,579.00 35 Pc Thermometer, Digital. Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery When Measured At A Standard Room Temperature Of 23 Deg C (73.4 Deg F) In A Test Tank Held At Constant Temperature Power Consumption: 0.1mw Low Battery Indication: Battery Symbol Displayed Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Memory: Last Measuring Reading Beeper Function: 1 Beep When Power On 3 Beeps After Measurement Completed External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) Accessories: Protective Case, Test Battery, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 2,599.00 90,965.00 21 Pc White Board. White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges 800.00 16,800.00 30 Set Allen, Wrench. 1. Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm; 3. With Holder/ring To Keep The Set Intact; 4. Label Of Sizes Engraved In Each Allen Wrench; 5. Smooth Surfaces And No Sharp Edges 6. Plastic Pack By Set 550.00 16,500.00 30 Pc Anti-static Device (anti-static Wrist Strap). Consists Of: A) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor, B) Banana Plug With Alligator Clip For Connecting To Ground (or Equivalent), C) At Least 59" Long Coiled Cord; D) Non Toxic Material E) Carton Box Or Plastic Pouch Packaging 1,200.00 36,000.00 60 Pc Combination Pliers, 8". Type: Combination Pliers; Body Shape: Square Nose Material: Chrome Vanadium/forged Steel Length: 9 Inches (minimum) Insulation Range: 1000 Volts (etched On The Handle) Design: Square Nose With Serrated Jaw Comes With Nickel Plated Finish, Side Cutter And Insulated Handle Must Be Branded (brand Must Etched Either In The Head Or On The Handle) 550.00 33,000.00 60 Pc Crimping Tool (rj 11/45). 1. Ratchet Crimp Tool 2. All-in-one Tool That Can Strip, Cut, And Crimp 3. Lightweight Steel Frame 4. Rj-11/45 Compatible 5. Positions For 8p/8c, 6p/6c And 4c Connectors 6. Lightweight, Compact, And Durable 7. Smooth Surface And No Sharp Edges Except Cutting Edges 8. Carton Box Packaging 658.00 39,480.00 18 Pc Desoldering Pump. 1. Material : Plastic Or Aluminum Housing; 2. Replaceable Heat-resistant Plastic Tip; 3. Length : Minimum Of 6 Inches; 4. Effective In Removing Solder; 5. Smooth Surface And No Sharp Edges 6. Carton Or Plastic Packaging 3,000.00 54,000.00 12 Pc Electric Drill, Portable. Type: Electric Power Material: Hard Plastic Rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts Speed: Variable Speed Chuck Capacity: 2 To 13 Mm Power Cord Must Have Flat Blade Attachment Plug (type A Plug) Comes With Hss Drill Bits: 2mm 4pcs. 4 Mm 4pcs. 6 Mm 4pcs. 8 Mm 4pcs. 10 Mm 4pcs.12 Mm 4pcs. 12.5 Mm 4pcs. Total- (28 Pcs) Masonry Drill Bits; 4 Mm 2pcs. 6 Mm 2pcs.8 Mm 2pcs. 10 Mm 2pcs. 12 Mm 2pcs. Total- ( 10 Pcs.) With Hammer Function For Concrete Drilling Comes With English User's Manual Includes Of The Following: A. A Diagram Of The Parts With Label; B. Assembly Instructions; C. Operating Procedures; D. Safety Precautions When Using The Equipment; E. Basic Troubleshooting And Maintenance Procedures. Warranty Period Of Parts And Service: 1 Year 4,500.00 54,000.00 12 Pc External Optical Drive. 1. Interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd; 5. Package Includes: A) 1 X External Optical Drive, B) 1 X Usb Power Cable, C) 1 X Usb Data Cable, 6. Item Size: 5.4"x 5.51"x0.63"(l X W X H) Approximate 7. Metal Or Hard Plastic Casing 8. Smooth Surface And No Sharp Edges 9. Carton Box Packaging 10. With User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures 11. With Service Centers Located In Major Cities In The Philippines. 2,000.00 24,000.00 60 Pc Flash Drive. 1. Capacity: 64 Gb ; 2. Connectivity: Usb 3.0, Backward-compatible With Usb 2.0, Plug And Play ; 3. Device/os Compatibility: Windows Vista, Windows 7, 8, 10, Mac Os 10.6+ Or Later Versions; 4. Form: Swivel Type Or With Cover; 5. Dimension: 0.40 X 0.80 X 2.31 In. (10.16 X 20.32 X 58.67 Mm) Approximate 6. Metal Or Hard Plastic Casing 7. Smooth Surface And No Sharp Edges 8. Carton And/or Plastic Packaging 9. User's Guide On Name Of Parts, Connection Guide, Maintenance And Safety Precautions. 800.00 48,000.00 60 Pc Flashlight, Head-mounted. 1. Type: Rechargeable, Head Mounted Led Flashlight; 2. Minimum Of 160 Lumens; 3. Beam Distance: Minimum Of 150 Meters; 4. Includes 220 V Ac Charger/power Adaptor (or Equivalent); 5. Charging Time: 3-6 Hours; 6. Provides Up To 30 Hours (minimum) Of Constant Light On A Single Full Charge; 7. Approximate Size: 60x 30mm 8. Smooth Surface And No Sharp Edges 9. Carton Box Or Plastic Pouch Packaging. 10. With User's Manual In English 450.00 27,000.00 60 Pc Hub/switch. 1. Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd 2. Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix 3. External Power Supply Adapter: 100 240vac,50/60hz 4. Fanless 5. Data Rates: 10/100mbps At Half Duplex ; 20/200mbps At Full Duplex 6.led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 7.dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) 8. Transfer Method: Store And Forward 9. Advance Functions: Green Technolgy, Saving Power Up To 73%; 802.3x Flow Control, Back Pressure; Auto-uplink Every Port 10. Certification: Fcc, Ce, Rohs 6,790.00 407,400.00 30 Pc Lan Cable Tester. 1 Cable Tester With Led Indication For Rj12, Rj11, Rj45, Cat5e, Cat5, 10/100 Base - T. 2 Main Tester: 1-2-3-4-5-6-7-8-g; 3 Remote Tester: 1-4-3-2-5-6-7-8-g; 4 Power Supply: 9 V Battery (included); 5 Capable Of Testing Crossover, Straight-through, And Rollover Cables; 6 Includes Plastic Case Or Pouch; 7 With User's Manual In English 4,500.00 135,000.00 60 Pc Long Nose Pliers, 8". 1 Material: Chrome Vanadium Steel, Hrc 38 To 60; 2 Length: 7 Inches (minimum); 3 Handle Type: Curved Handle With Rubber Cushion For Easy Grip; 4 Jaws Type: Knurled And Long Tempered; 5 Comes With Hardened Cutting Edges And Chrome-nickel Finish. 6. Smooth Surface And No Sharp Edges 7. Carton Or Plastic Packaging 550.00 33,000.00 60 Pc Multimeter, Digital. Material: Plastic Casing Main Functions: Auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Over Load Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5) 1,000.00 60,000.00 120 Pc Patch Panel (48 Ports). 1. Network Patch Panel 2. 48 Port Patch Panel 3. Cat6 Cable 4. Material: Abs Plastic 5. Application: Utp(unshielded) 6. Certification: Rohs, Iso, Ce 7. Rj45 Connector : Two Rows (1-24 Ports & 25-48 Ports) 8. Transport Package: 1pcs/box 9. Smooth Surface And No Sharp Edges 6,950.00 834,000.00 6 Pc Pc Video Camera. 1) 5.0 Mega Pixel Web Camera, Usb-type; 2) With Microphone For Laptop And Desktop Pc Use; 3) Resolution: At Least 640 X 480; 4) Support Windows Xp/7/8/equivalent Mac Os Or Later Versions; 5) With User's Manual In English Which Includes: A) A Diagram Of The Parts With Their Names, B) Operating Procedures C) Basic Troubleshooting And Maintenance Procedures. 6) Hard Plastic Or Metal Casing 7) Smooth Surface And No Sharp Edges 7,000.00 42,000.00 30 Pc Philip's Screwdriver, 8" Insulated. 1. Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Handle Material: Molded Plastic 3. Overall Length: 8 Inches (minimum) 4. Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) 5.non Slip Handle Design 6. Carton Or Plastic Packaging 400.00 12,000.00 30 Pc Precision Screwdriver, 8" Insulated. 1. Material: Hardened And Tempered Steel; 2. 1 Set Comes With The Following: A) 3 X Phillips Tip No. 00, 0, And 1 ; B) 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; C) 1 X Awl; D) 1 X Magnet; E) Plastic Storage Case; 3. Non Slip Design Handle 400.00 12,000.00 30 Pc Soldering Iron, 60w. 1. Type: Iron Rod 2. Voltage: 220/240vac, 60hz, Single Phase; 3. Power: 60w (minimum); 4. Body Length: 8.3 Inches (21 Cm) Approximate 5. Cord Length: 1.5 Meters (minimum) 6. Handle: Plastic; (non Slip Handle) 7. With User's Manual Written In English That Contains User's Guide, Operating Procedure, Parts With Description, Safety Procedure, And Maintenance; 8. Interchangeable Copper Tip; 9. Should Have Available Spare Parts Nationwide For A Minimum Period Of 5 Years; 10. Carton And/or Plastic Packaging 1,670.00 50,100.00 30 Pc Standard Screwdriver (flat), 8" Insulated. 1. Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Handle Material: Molded Plastic 3. Overall Length: 8 Inches (minimum) 4. Insulation Protection (including Shank): 1000v, Vde Certified (or Its Equivalent) 5.non Slip Handle Design 6. Carton Or Plastic Packaging 550.00 16,500.00 30 Pc Uninterruptible Power Supply (ups). The Item Shall Have The Following Specifications: 1. Type: Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof 2. Voltage: Nominal Input Voltage: 230v, 50/60 Hz 3. Output Power Capacity: 600va (minimum) 4. Output Connections :2 Universal Receptacle (minimum) 5. Cord Length: 1 Meter (minimum) 8,000.00 240,000.00 6 Pc Usb External Hd. 1) 1tb Portable/external Hard Drive 2) Application: Laptop / Desktop Pc 3) Interface Type: Sataii 4) Installation: Mobile 5) Formatted Capacity: 1000gb(windows Display About 298gb) 6) Size(mm): 14.29 X 80.01 X 17.60 (approx.) 7) Metal Casing 2,500.00 15,000.00 30 Pc Wire Stripper. Type: Spring-loaded Self-opening; Body Shape: Long Jaw With Slot Blade Material: Hardened Alloy Steel (sharp Edges To Strip And Cut The Wires) Wires To Be Stripped: 10 Awg To 24 Awg Length: 7 Inches (minimum) Comes With Automatic Self- Adjusting Spring, Crimping Slot, And Hard 275.00 8,250.00 60 Pc Wireless Access Point. Type: Wireless Access Point Dual Band Wifi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4 Ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) 3,489.60 209,376.00 Total 22,623,009.00 2. The Department Of Education, Schools Division Office Of Albay Now Invites Bids For The Above-cited Procurement Opportunity. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders In The Amount Of Php 25,000.00 Pursuant To The Latest Guidelines Issued By The Gppb. Delivery Of The Goods Is Thirty (30) Calendar Days From The Date Of The Ntp. Delivery Should Be At The Designated Schools (door-to-door Delivery). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Department Of Education, Schools Division Office Of Albay, Bids And Awards Committee Office, And Inspect The Bidding Documents At The Address Given Below From Monday To Friday During Office Hours (8:00 Am To 5:00 Pm). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13 To December 3, 2024; 9:00 Am From The Address Below And Upon Payment Of Php 25,000.00 As The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity (www.depedalbay.com) Starting November 13, 2024 Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Education, Schools Division Office Of Albay Will Hold A Pre-bid Conference On November 20, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City, Which Shall Be Opened To Qualified Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 3, 2024; 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Bid Opening Shall Be On December 3, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website, For Them To Be Included In The Document Request List Of The Project. The Bidding Documents May Be Viewed Also At The Deped Sdo Albay Schools Division Office Website: Www.depedalbay.com. 9. The Department Of Education, Schools Division Office Of Albay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Jade O. Alberto Education Program Supervisor Bac Secretariat Head-designate Office Of The Bids And Awards Committee 2nd Floor, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City Tel.no.: 052-204-8535 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.depedalbay.com November 12, 2024 (sgd.) Bernie C. Despabiladero, Edd Assistant Schools Division Superintendent Bac Chairperson For Goods And Consulting Services