Paint Tenders

Details: Description Republic Of The Philippines Province Of Misamis Oriental Municipality Of Tagoloan Invitation To Bid-13 Procurement Of Infrastructure Construction Of Als Building (tagoloan East District Office) 1. The Municipal Government Of Tagoloan, Misamis Oriental, Through Special Education Fund (sef) Intends To Apply The Sum Of Three Million Nine Hundred Seventy Thousand Pesos Only (php 3,970,000.00) Broken Down As Follows: Item Brief Description Sub- Abc 2 Storey Preparation With 1 Classroom, A Head Staff Office,ramp,conference Room, Stairs, Public Toilet, Electrical And Painting By Contract Php 3,970,000.00 Total Abc Php 3,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Infrastructure Construction Of Als Building (tagoloan East District Office). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of Tagoloan, Misamis Oriental Now Invites Bids For The Procurement Of Infrastructure Construction Of Als Building (tagoloan East District Office ) Completion Of The Works Is Required Within 150 (one Hundred Fifty) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section 11 (instructions To Bidders) 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184 Otherwise Known As The “government Procurement Reform Act” 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee (bac) Secretariat At The Address Given Below From 8:00 A.m. To 5:00 P.m. From November 06 ,2024 To November 25,2024. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 To November 25, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents Pursuant To The Guidelines Issued By The Gppb In The Amount Of Five Thousand Pesos Only Php 5,000.00. At Municipal Treasurer’s Office –lgu-tagoloan, Provided That Bidders Shall Pay The Applicable Fee For Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Municipal Government Of Tagoloan, Misamis Oriental Will Hold A Pre-bid Conference On November 13, 2024 At 11:00 O’clock In The Morning At Municipal Conference Room, Ground Floor Municipal Hall Building Poblacion,tagoloan, Misamis Oriental, This Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 2:00 O’clock In The Afternoon On November 25, 2024 .all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On 2:00 O’clock In The Afternoon On November 25, 2024 At The Municipal Conference Room Ground Floor, Municipal Hall Building- Poblacion, Tagoloan, Misamis Oriental. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted. 8. The Municipal Government Of Tagoloan, Misamis Oriental Reserves The Right To Accept Or Reject Any All Bids, Declare A Failure Of Bidding , Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Ms. Marivic Bagay Head Bac Secretariat Poblacion, Tagoloan, Misamis Oriental Gene A. Baculpo, C.e Mpdc/ Chairman Bids And Awards Committee

Details: Description Supply And Delivery Of 1 Unit Hauling Truck Abc: P3,000,000.00 A. Prime Mover Rated Power: 150 Ps , Minimum At 2600 Rpm Engine Displacement: 3900 Cc , Minimum Fuel Ignition/fuel: Compressions Ignition (diesel) Engine Type: Diesel, 4 Cylinder, 4 Stroke, Water Cooled, Direct Injection B. Performance / Classification Aspiration Method: Turbocharged / Turbocharged And Intercooled Steering System: Power Assisted Steering Transmission: Manual, 5-speed 1 Reverse, Minimum No Of Drive: 2 Engine Emission Standard: Shall Be Euro Iv C. Body - No. Of Wheels: 7 Wheels (2 Front; 4 Rear; 1 Spare) - No Of Studs: 6, Minimum - Payload Capacity: 4000 Kg, Minimum - Gross Vehicle Weight: 8,500 Kg, Minimum - Front Cabin: Single With Air Conditioning System - Rear Body Type: Wing Van With Side Bars/side-step Grille (2 Layers) - Drop Side Height: 400 Mm, Minimum - Total Body Length: 18 Ft, Minimum - Suspensions: Parabolic Leaf Spring / Multi Leaf Spring / Semi Elliptic Leaf Spring With Shock Absorber - Brake System: Air Brakes/hydraulic Brakes - With Tint For All Windows (medium Dark) And For Windshield (light Dark) "with Set Of Heavy Duty Tools(all Items Must Be Compatible To The Offered Unit): A. Tire Wrench (at Least 2 Different Sizes) B. One (1) Piece Adjustable Wrench (size:12'', Minimum) C. One (1) Piece Hydraulic Jack (10 Tons, Minimum) D. One (1) Set Of Combination Wrench (size:8-32mm, Minimum) E. One (1) Pair Of Mechanical Plier (size: 8 Inch, Minimum) F. (for Item G, Which Ever Is Compatible To The Offered Unit) One (1) Set Allen Type Wrench (at Least 8 Different Sizes) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver G. One (1) Piece Early Warning Device (lto Compliant)" Warranty One (1) Year Or 50,000 Km (whichever Comes First) With Free Pms (at Least 2 Visit) Other Requirements: -with Lto Registration And Third-party Liability (tpl) Insurance In The Name Of The Beneficiary -with Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) -painted With "hvcd Program Xii" On Both Sides (1 Ft Height, Color: Dark Green) -bidder Must Have Owned Or Managed Service Facility Within Region 11 Or Region 12 (in Case Located In Region 11, The Service Facility Must Cater The Recipients From Region 12) -shall Provide Fuel In Every Unit (at Least Half Of The Tank Capacity) And During Inspection, Testing And Training -with Engine Oil In Every Unit -bidder Shall Submit Unamended Brochure Of The Offered Product Upon Bidding With Certificate Of Conformity Issued By The Denr Pursuant To Section 22, Chapter Ii Of Ra 8749 - Delivery Period: 30 Calendar Days - Delivery Site: Da Tupi Res Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Test Run & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P5,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description Supply And Delivery Of 4 Units Hauling Truck Abc: P14,000,000.00 A. Prime Mover -rated Power: 150 Ps , Minimum At 2600 Rpm -engine Displacement: 3900 Cc , Minimum -fuel Ignitinio/fuel: Compressions Ignition (diesel) -engine Type: Diesel, 4 Cylinder, 4 Stroke, Watercooled, Direct Injection B. Performance / Classification -aspiration Method: Turbocharged / Turbocharged And Intercooled -steering System: Power Assisted Steering -transmission: Manual, 5-speed 1 Reverse, Minimum -no Of Drive: 2 -engine Emission Standard: Shall Be Euro Iv C. Body No. Of Wheels: 7 Wheels (2 Front; 4 Rear; 1 Spare) No Of Studs: 6, Minimum -payload Capacity: 4000 Kg, Minimum -gross Vehicle Weight: 8,500 Kg, Minimum -front Cabin: Single With Air-conditioning System -rear Body Type: Drop Side With Side Bars/side-step Grille (2 Layers) -drop Side Height: 400 Mm, Minimum -total Body Length: 18 Ft, Minimum -suspensions: Parabolic Leaf Spring / Multi Leaf Spring / Semi Elliptic Leaf Spring With Shock Absorber -brake System: Air Brakes/hydraulic Brakes -with Tint For All Windows (medium Dark) And For Windshield (light Dark) -with Set Of Heavy Duty Tools (all Items Must Be Compatible To The Offered Unit): A. Tire Wrench (at Least 2 Different Sizes) B. One (1) Piece Adjustable Wrench (size:12'', Minimum) C. One (1) Piece Hydraulic Jack (10 Tons, Minimum) D. One (1) Set Of Combination Wrench (size:8-32mm, Minimum) E. One (1) Pair Of Mechanical Plier (size: 8 Inch, Minimum) F. (for Item G, Whichever Is Compatible To The Offered Unit) One (1) Set Allen Type Wrench (at Least 8 Different Sizes) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver G. One (1) Piece Early Warning Device (lto Compliant) Warranty -one (1) Year Or 50,000 Km (whichever Comes First) -with Free Pms (at Least 2 Visit) Other Requirements -with Lto Registration And Third-party Liability (tpl) Insurance In The Name Of The Benefeciary -with Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) Painted With "corn Program Xii" On Both Sides (1 Ft Height, Color: Dark Green) -bidder Must Have Owned Or Managed Service Facility Within Region 11 Or Region 12 (in Case Located In Region 11, The Service Facility Must Cater The Recipients From Region 12) -shall Provide Fuel In Every Unit (at Least Half Of The Tank Capacity) And During Inspection, Testing And Training -with Engine Oil In Every Unit -bidder Shall Submit Unammended Brochure Of The Offered Product Upon Bidding -with Certificate Of Conformity Issued By The Denr Persuant To Section 22, Chapter Ii Of Ra 8749 Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Test Run & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A)after The Conduct Of Operation And Maintenance Training. Delivery Period: 30 Calendar Days Delivery Site: Da Tupi Res, Bololmala, Tupi South Cotabato Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description Invitation To Bid Itb No. 2024-11-004 Improvement Of Multi Purpose Hall/roof Installation 1. The Barangay Maligaya, Gloria, Oriental Mindoro, Through The 20% Barangay Development Fund For The Year 2024 Intends To Apply The Sum Of Sixty Nine Thousand One Hundred Fifty Pesos Only (php. 69,150.00) Being The Approved Budget For The Contract (abc) To Payments For The Contract For The Improvement Of Multi Purpose Hall/roof Installation. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Sangguniang Barangay Maligaya Now Invites Bids For Improvement Of Multi Purpose Hall/roof Installation. Delivery Of Goods Is Required Within 10 Calendar Days Upon Receipt Of Notice To Proceed (ntp). Bidders Should Have Completed, Within Five (5) Years, From The Date Of Submission And Receipts Of Bids, A Single Largest Completed Contract (slcc) That Is Similar To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Philippine Statistics Authority (psa) Consumer Price Indices. Section 23.4.1.3 Of Irr Of Ra 9184. Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The Government Procurement Reform Act”. (i) Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations Within At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Barangay Maligaya, Gloria, Oriental Mindoro And Inspect The Bidding Documents At The Address Below During Office Hours From Monday To Friday 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On November 7, 2024 To November 18, 2024 At The Barangay Maligaya, Municipality Of Gloria And Upon Payment In Cash Of Non-refundable Fee In The Amount Of Five Hundred Pesos Only (php.500.00). It May Also Be Downloaded Free Of Charge From Website Of Philippine Electronic Procurement System (philgeps) And The Website Of Procuring Entity Provided That Bidders Shall Pay The Applicable Fee For The Bidding Of Documents Not Later Than The Submission Of Their Bids. 6. Bids Must Be Delivered To The Barangay Maligaya, Gloria, Oriental Mindoro On Or Before November 19, 2024 At 1:00 Pm. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In Itb Clause. Bid Opening Shall Be On November 19, 2024 At 1:30 Pm At The Barangay Hall. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Barangay Maligaya, Gloria, Oriental Mindoro, Reserves The Right To Inject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Materials: 8 Pcs Gi Pipe 2” S20 15 Pcs Pre Painted Rib Type 5 Pcs Channel Bar 2 X 3 25 Pcs C-purlins 2 X 3 5 Bags Cement 1 Gal Epoxy Primer 4 Pcs Box Gutter 1 Box Welding Rod 1 Box Cutting Disc# 4

Details: Description Republic Of The Philippines Province Of La Union Municipality Of Caba Bids And Awards Committee Invitation To Bid For The Procurement Of Infrastructure Project Of The Municipality The Local Government Unit Of Caba, La Union, Through The Supplemental Budget Intends To Apply The Sum Of One Million Four Hundred Thousand Pesos(php1,400,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Various Infrastructure Projects Listed Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. C.r. # 29. Development Of Caba Memorial Park/caba Public Cemetery, Pob. Norte - Php1,400,000.00 Brief Description: Site Preparation, Concrete & Masonry Works, Painting Works The Local Government Unit Of Caba, La Union Now Invites Bids For The Various Infrastructure Projects Listed Above. Completion Of The Works Required Is Fifty(50)days. Bidders Should Have Completed, Within Ten (10) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Error! Reference Source Not Found.. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. Interested Bidders May Obtain Further Information From The Local Government Unit Of Caba, La Union - Bac And Inspect The Bidding Documents At The Address Given Below From 8am To 5pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos (php5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. Bac Activities Date Issuance And Availability Of Bidding Documents Oct. 31 – Nov. 20, 2024; Bac Office Pre-bid Conference Nov. 08, 2024; 9:00am; Mun. Function Hall Submission And Receipt Of Bids Nov. 20, 2024; 8:30am; Mun. Function Hall Opening Of Bids And Eligibility Check Nov. 20, 2024; 9:00am; Mun. Function Hall Bid Evaluation Nov. 21, 2024 Post-qualification Nov. 22, 2024 Issuance Of Notice Of Award Nov. 25, 2024 Contract Preparation And Signing Nov. 26, 2024 Issuance Of Notice To Proceed Nov. 27, 2024 Bids Must Be Delivered To The Address Below On Or Before Nov. 20, 2024; 8:30am. At Municipal Function Hall. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause Error! Reference Source Not Found.. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Local Government Unit Of Caba, La Union Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Lisa P. Ugay Bac Secretary Municipal Hall, Pob. Norte Caba, La Union (072) 708-0116 Anthony P. Maglaya Bac Chairman

Details: Description 1. The Local Government Unit Of Bislig City, Through The 5% Disaster Funds(tf-ldrrmf)-supplemental Budget No.1 Cy 2024, Intends To Apply The Sum Of Eight Hundred Forty Six Thousand Twenty Eight Pesos And 79/100 (p 846,028.79) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Purchase And Installation Of 2-way Communication Tower (san Antonio) @ Brgy. San Antonio, Bislig City, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. 2.1 Brief Description Of Work: Structure Excavation, Gravel Fill, Backfilling Concreting Of 4 Units Concrete Pedestal And Footing, Installation Of Steel Framing For 100 Ft. Trylon Tower, Painting Works Of Steel Surface And Supply, Delivery And Installation Of Communication Tower Equipment’s. 2.2 Contract Duration: Forty Five (45) Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Bislig City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm. During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 05, 2024 Until The Deadline For The Submission Of Bids, From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p1,000.00). The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On November 14, 2024, 1:30 P.m. At Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Given Address As Indicated Below On Or Before November 26, 2024, 1:30 P.m... Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 26, 2024, 1:30 P.m. At The Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description 1. The Local Government Unit Of Bislig City, Through The 20% Edf 2024 Intends To Apply The Sum Of Two Million Nine Hundred Fifty Seven Thousand Six Hundred Sixty One Pesos And 37/100 (p 2,957,661.37) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Tourist Assistance Center Building (phase Ii) At National Highway, Core 1 Lot, Brgy. Poblacion, Bislig City, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Project Below. 2.1 Brief Description Of Work: Installation Of Steel Roof Framing Which Includes Full Truss, Half Truss, Fascia Framing, Purlins W/ Cleats, Sagrod, Cross Bracing, Painting Works, Installation Of Roof Sheets Cover With Two Sided Roof Insulation, Installation Of Ridge And Valley Roll, Installation Of Wall Flashing And Scaffolding. 2.2 Contract Duration: Sixty (60) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Bislig City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm. During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 05, 2024 Until The Deadline For The Submission Of Bids, From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, According To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On November 14, 2024, 1:30 P.m. At Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Given Address As Indicated Below On Or Before November 26, 2024, 1:30 P.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 26, 2024, 1:30 P.m. At The Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 25b00029 : Oo1: Ensure Safe And Reliable National Road System: Bridge Program - Construction Of New Bridges - Claveria Viaduct Along Maharlika North Rd 1. The Dpwh Regional Office Ii, Through The Dpwh Fy 2025 Nep (epa - Early Procurement Activity) Intends To Apply The Sum Of ₱285,192,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 25b00029: Oo1: Ensure Safe And Reliable National Road System: Bridge Program - Construction Of New Bridges - Claveria Viaduct Along Maharlika North Rd. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Oo1: Ensure Safe And Reliable National Road System: Bridge Program - Construction Of New Bridges - Claveria Viaduct Along Maharlika North Rd Contract Id No. : 25b00029 Location : Claveria, Cagayan Brief Project Description : Completion Of The First 2-lanes Including Slope Protection & Approach Slab Concreting Of 8pcs. - 2.0m Dia. X 46.20m Bored Pile @ Abutment A Piers 5 To 7 Concreting Of 2pcs. – 1.60m Dia. X 36.20m Bored Pile @ Abutment B Installation Of 7 Pcs. Single Arm Led Roadway Lighting 12m Pole @ Pier Coping 1 To 7 Steel Gravel Platform Concreting Of 11pcs. – 2.0m Dia. X 46.20m Bored Pile @ Piers 2 To 7 (other 2-lanes) Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures & Appliances For The Field Office Of The Engineer • Provision Of 4x2 Pickup Type Service Vehicle For The Engineer (rental Basis) • Operation And Maintenance Of 4x2 Pickup Type Service Vehicle For The Engineer Other General Requirements • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Environmental Management And Monitoring Earthworks • Removal Of Structures And Obstruction (0.30m Thick – Pccp, Steel, Steel H-piles) • Excavation (unsuitable, Surplus Common, Structure) • Embankment (from Borrow) • Subgrade Preparation Subbase And Base Course • Aggregate Subbase Course Surface Courses • Pccp, 0.30m Thick, 14-day Concrete Road/bridge Construction • Steel H-piles, (furnished, Driven) • Concrete Piles Cast In Drilled Holes • Permanent Casing • Concrete Railing Standard • Pile Integrity Testing, Crosshole-sonic • High Strain Dynamic Testing (p.d.a) • Structural Steel, (furnished, Fabricated & Erected) Grade 36 • Bolts With Nuts And Washers • Reinforcing Steel Grade (40 & 60) (bridge) • Structural Concrete (20.68 & 27.58) Mpa Class A 28 Days • Structural Concrete, Painting Works • Prestressed Structural Concrete Members (24.00, 30.00, 36.00) M Type Iv-b I-girders • Lean Concrete, Class B, 16.5 Mpa • Paint • Premolded Expansion Joint Filler With Sealant • Expansion Joint • Elastomeric Bridge Bearing • Elastomeric Bridge Bearing (accessories) Drainage And Slope Protection Structures • Grouted Riprap A • Gabions 0.5m X 1m X 2m Metallic Coated • Filter Cloth • Drainpipe Galvanized Miscellaneous Structures • Metal Guardrail (metal Beam) Including Post Single W-beam • Metal Beam End Piece Bull Nose • Road Signs (warning, Regulatory) • Hazard Markers (one-way Hazard Markers, Chevron Signs) • Reflectorized Thermoplastic Pavement Markings (white & Yellow) • Reflectorized Thermoplastic Rumble Strips • Roadway Lighting • Road Safety Barrier System Plastic Jersey Type – Waterfilled • Impact Attenuator/crash Cushion Stationary Gating - Sand Filled Barrels Bank And Slope Protection Works • Geotextile (bridge) • Separation Geotextile Approved Budget For The Contract (abc) : ₱285,192,000.00 Contract Duration : 448 Calendar Days Inclusive Of 30 Unworkable/rainy Days, 88 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bcccp - Bridges: Construction-concrete (superstructure) With Cast-in-place Piles. 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium B For Bridges. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13 - December 02, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 20, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before December 02, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On December 02, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 13-19, 2024 Conspicuous Place (procurement Bulletin Board): November 13-19, 2024

Details: Description Republic Of The Philippines Department Of Education Division Of City Of Cabadbaran Bids And Awards Committee Km. 1 Hinagdanan, Comagascas, Cabadbaran City Invitation To Bid For “procurement & Delivery Of Various Assistive Devices, Equipment, Supplies & Materials For Inclusiv Learning Resource Center (ilrc) Lot 2” Depedcabadbaran Goods No. 2024-011 1. The Department Of Education, Division Of Cabadbaran City, Through The Sub-aro Osec-13-24-5130 Dated July 18, 2024 Intends To Apply The Sum Of One Million Seven Hundred Twenty-two Thousand Eight Hundred Pesos Only (php 1,722,800.00) Being The Abc To Payments Under The Contract For The Procurement & Delivery Of Various Assistive Devices, Equipment, Supplies & Materials For Inclusiv Learning Resource Center (ilrc) Lot 2. Bids Received In Excess Of The Abc Shall Be Automatically Rejected During Bid Opening. Item No. Project Description Unit Quantity Abc Php - 1,722,800.00 Bidding Document Fee Php - 5,000.00 Lot 2 Procurement & Delivery Of Various Assistive Devices, Equipment, Supplies & Materials For Inclusiv Learning Resource Center (ilrc) Lot 2 1 Hanger Stand Pcs 2 2 Long Window Curtains Thick Pcs 400 3 Curtain Rod 10" Pcs 100 4 Monoblock Chairs Heavy Duty Pcs 250 5 Working Table 3x10 Wood Pc 1 6 Working Table 3’w X 12’l X 3’h Wood Pcs 2 7 Speech Therapy Table Pcs 4 8 Study Lamp Table Sets 10 9 Center Table Pc 1 10 Convertible Drawing Art Table Size: 24x36 Pc 1 11 Table/desk Painting Easel Could Be An H Or An A Easel Type, For A Easel 38” To 75”, For H Esel 84” To 96” Pcs 5 12 Artist Stool With Wheels Height Adjustable & 360” Swivel Soft Pu Leather Cushion Detachable Design Dimension: Set Diameter: 16.2” Seat Height: 25.6-35.8” Full Height: 37.4: - 47.6” Max. Capacity: 300lbs. Pcs 6 13 Filing Steel Cabinet 3 Layer Sets 12 14 10 Layer File Storage Cabinet With Wheel Office And Desk Drawer Cabinet Organizer Sets 5 15 Filing Steel Cabinet With Door (upper) And Drawers (lower) Sets 10 16 Shoe Rack Steel Cabinet Pcs 2 17 Storage Rack Heavy Duty Set 1 18 Stack Rack Dimension: 30 In Hx21 In Wx17 In L At Least 6 Shelves Maybe Wooden Or Metal Materials Devised With Rollers To Roll The Rack In Any Location Sets 8 19 7 Layer Metal Rack Boltless Organizer Stainless Rack Steel Storage Shelves Pcs 5 20 Medicine Cabinet Stainless 20x26x5 Inch Single Door Medicine Cabinet Pc 1 21 Storage Cabinet Dimension: 48*30*83cm Materials: Plastic Sets 3 22 Dresser And Chest Wooden Cabinet Sets 2 23 Swivel Teachers Chair (leather Type, Chrome Base. Solid Aluminum Armrest, Swing Back, High Density Foam) Set 1 24 Sofa Chair ( 5 Seaters With High Density Foam And Leather Cover ) Set 1 25 Chairs Cod Armchair Backrest Wood Horn Chair,43x48x74, Material: High Quality Iron Wood, Max: 150kg Sets 6 26 Wooden Chair/leather Seat Sets 4 27 Nordic Plastic Chairs Sets 30 28 Cleopatra Chair W/ Foam 4 Or 5 Seaters Sets 2 29 Cabinet Bookshelves Sets 10 30 Whole Body Mirror (4x8) Pc 1 31 Artist Taboret Set 1 32 Studio/painting Easel Sizes: 85” – 120” Tall Pcs 2 33 Montessori Open Shelf Sets 3 34 Wooden Cabinet For Kitchen Utensils With Doors And Drawers 6 Feet X 6 Feet Set 1 2. The Deped Cabadbaran City Division Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Thirty (30) Days Upon The Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project And With An Amount Of At Least 25% Of The Abc To Be Bid. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Interested Bidders May Obtain Further Information From Deped Cabadbaran City Division Bac Secretariat, Located At Deped Cabadbaran Division Office, Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City And Inspect The Bidding Documents From Mondays To Fridays 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 22, 2024 From The Given Address And Website(s) Below With Letter Of Intent Address To Bac Chairperson, And Special Power Of Attorney If Representative In The Amount Of Five Thousand Pesos Only, (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Bank Deposit. 6. The Deped Cabadbaran City Division Will Hold A Pre-bid Conference And Other Bidding Activity On The Venue, Date And Time Stated Below, Which Shall Be Open To All Interested Parties Who Wants To Purchase The Bidding Documents And Participate The Public Bidding. Activity Date And Time Venue Philgeps Posting October 18, 2024 Deped, Division Of Cabadbaran City Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City Issuance Of Bidding Documents From October 22, 2024 Before Submission And Bid Opening Deped, Division Of Cabadbaran City Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City Pre-bid Conference October 28, 2024 (monday), 8:30 Am Deped, Division Of Cabadbaran City Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City Thru Google Meet: Meet.google.com/sdk-szbg-vmd Submission November 11, 2024 8:30am (monday) Deped, Division Of Cabadbaran City Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City Opening Of Bids November 11, 2024 9:00am (monday) Deped, Division Of Cabadbaran City Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City 7. Bids Must Be Duly Received By The Bac Secretariat Through Hard Copy At The Office Address Indicated Below On Or Before 8:30am, November 11, 2024; All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Late Bids Shall Not Be Accepted. 8. The Deped Cabadbaran City Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Jill A. Marcellones Bac Secretariat Deped, Division Of Cabadbaran City Km1 Hinagdanan, Brgy. Comagascas, Cabadbaran City Tel. No. 818-5356 Email Address: Jill.marcellones@deped.gov.ph Cel No. 09306657934 _______________________________ Love Emma B. Sudario, Ceso Vi Asst. Schools Division Superintendent Bac Chairperson

Details: Description Orthopedic Equipment 1 Unit Or Bed (operating Room Bed) Specifications: External Size (lxwxh) 1940x480x770-1020 Mm Built-in Kidney Bridge 0-120 Mm Back Plate Up/down 80°/10° Head Plate Up/down 60°/90° Trendelenburg/reverse Trendelenburg 25°/25° Lateral Tilt Left/right 20°/20° Leg Plate Down 90° Patient Weight Capacity 250 Kg X-rays Translucent Optional With Extra Charge C-arm Compatible No Multi-functional Orthopedic Frame Yes 2 Pieces Or Cabinets Glass Door Specifications: 4 Levels Color : White / Light Grey Thinkness: 21 Guage Or 0.8mm Size: W=40cm,l=90cm,h=185cm Material: All Steel Powder Coated Paint Weight: 48kg Paint: Powder Coat Rust-proof 3 Pieces Small Mayo Table Dimension:44.5*42*79.5-131cm Material: Stainless Steel With Tray For Carrying Instruments Height Of Tray Is Adjustable From76cm To130cm 1 Piece Foot Operated Faucet Specifications: Single Cold Water Tap Outlet + Foot Board + Two 1m Hose Hose Type: Basin Faucet; Basin Not Included Style: Contemporary Hot And Cold Handle: Single Handle Surface Treatment: Chrome Style: Single Handle Single Hole Faucet Installation: Single Hole Flexible Hose: 1 Meter Material: Brass Body, Ceramic Size: 1/2" Thread Weight: 840g 1 Set Balkam Frame Specifications: Orthopaedic Bed With Mechanically Operated Back Rest & Knee Rest By Crank Mechanism. Size: 2140 × 940 × 500 Mm. Epoxy Coated Frame Work With Beautiful Abs Panels. 4 Section Perforated Top. Balkan Frame (made Of Aluminium) With Monkey Bars And Monkey Chains. Collapsible Side Railings. Four Swivel Castor (all With Individual Brakes). Provision For I.v. Rod. Freight Saving Knock-down Construction. 6 Pieces Bed Linens With School Logo Flat,fitted With Pillowcase White, Good Quality Fabric With Git Logo 6 Pieces Pillow Material: Polyester Fiberfill, Cotton Dimension (l X W) 46cmx 71cm 2 Sets Or Gown Free Size Operating Room Gown Head Cap Cotton Ribbed Cuffs Wash And Wear Cotton Material 3 Pieces Patient Gown Free Size Patient’s Gown Back Tie, Open Back Wash And Wear Cotton Material 2 Units Instrument Trolley Stainless Steel Two Shelves Size: 20"w X 48" X 34"h 7 Pieces Kelly Hemostatic Forceps-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 7 Pieces Kelly Hemostatic Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mayo Scissor-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Metzenbaum Scissors-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mosquito Forceps-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mosquito Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Needle Holder Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Scalpel Handle No. 3 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Scalpel Handle No. 4 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Skin Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 3 Pieces Tissue Forceps (125 Mm) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Thumb Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Instrument / Mayo Table Dimension:44.5*42*79.5-131cm Made Of Stainless Steel,which Is Reliable,smooth And Elegant With Tray For Carrying Instruments Height Of Tray Is Adjustable From76cm To130cm 3 Tanks Medical Oxygen Tank (big) (20lbs) 20 Lbs Oxygen Tank 4 Pieces Towel Clamp Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Army-navy Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Richardson Retractor-double-end Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Self-retraining Retractor (balfour) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Halsted Mosquito Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Mixter-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Mayo Scissor-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Periosteal Elevator Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Chisel/osteotome Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Mallet Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Rongeur Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Holder Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 7 Pieces Twist Drill/drill Bits 100mm-115 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Gigli Saw (handle And Wire, 500 Mm) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Pin / Wire Cutter Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Pin / Wire Puller Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bonecurette Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Cast Spreader Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Clamp Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Screw Driver (flat Screw Driver For Upper Limb) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Tank Oxygen Unit 20 Lbs Oxygen Tank 1 Piece Rechargeable Emergency Light Specifications: 2 Head (17 Hours, 24pcs Bright Led) 220-240v Ac 50/60hz 6v 4.5ah Sealed Lead Acid Battery 20.24 Hours Charge Time <0.1 Second Response Time Dimensions : 31 X 812x 31.5cm 2 Units Sphygmomanometer, Non-mercurial-adult Cuff Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 2 Units Sphygmomanometer, Non-mercurial-pediatric Cuff Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 1 Piece Thermometer, Non-mercurial-oral Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Piece Thermometer, Non-mercurial-rectal Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Unit Bag Valve Mask Unit (adult) Specifications: Includes Reusable Oxygen Reservoir Bag, Silicon Mask, Oxygen Tubing, And A Plastic Container Powerful, Patient-oriented, And User-friendly Ergonomic, Lightweight Design To Decrease Fatigue During Extended Ventilation Recoils Quickly To Allow Rapid Ventilation Low Valve Resistance For Thorough Airflow Hygienic & Transparent 1 Unit Bag Valve Mask Unit (pediatric) Specifications: Includes Reusable Oxygen Reservoir Bag, Silicon Mask, Oxygen Tubing, And A Plastic Container Powerful, Patient-oriented, And User-friendly Ergonomic, Lightweight Design To Decrease Fatigue During Extended Ventilation Recoils Quickly To Allow Rapid Ventilation Low Valve Resistance For Thorough Airflow Hygienic & Transparent 1 Set Bassinet Stainless Baby Bassinet With Acrylic Neonatal Crib, And Mattress. 1 Set Dilatation/curette Set Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Uterine Sound/hysterometer Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Uterine Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Dull Uterine Curette (300x5, Sharp) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Sharp Uterine Curette Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Vaginal Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Vaginal Speculum Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Ovum Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Set Hegars Dilator, Graduated Sizes Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Sponge Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Metzenbaum Scissor-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Units Emergency Cart Specifications: 1 Lumination (adjustable):60,000-180,000lux Bulbs Quantity:80pcs Bulbs Type:led Average Bulb Life:≥80,000h Color Temperature(adjustable):3700k ~5000k Display Index (adjustable):85~98 Focus Depth:≥1200mm Spot Diameter: 160-280mm(adjustable) Bright Adjustment: 1%-100% The Surgeon's Head Heats Up:<1°c Voltage:ac100-240v 50/60hz 1 Piece Kelly Pad Washable And Can Be Sterilized Size: 50x110cm (tube Dia X Overall Length) Material: Rubber 1 Piece Sphygmomanometer Non-mercurial Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 3 Pieces Stethoscope Specification: Double Dual Head (diaphragm And Bell) Latex Free, Hypo-allergenic, Y Rubber Tube (28 Inches) Non-chill Rim And Diaphragm Ergonomically Designed Headset Snap Tight Soft-sealing Eartips 1 Unit Clinical Height And Weight Scale Specifications: Capacity: 400 Lb X 4 Oz / 180 Kg X 100 G Height Rod: 20- 78in / 76-198cm Platform Size: 10.5” W X 14.5”d/ 27cm W X 37cm D Scale Height: 59”/150cm Weigh Beam- Dual Reading, Die-cast Beam 1 Set Eent Diagnostic Set With Ophthalmoscope And Otoscope Specifications: Fibre Optic-opthalmoscope Otoscope Head With Standard Handle Removable Magnifying Kit Set 2.5v Led Light With Long Life Bulb / Gives Bright Cool Light Grey Plastic Hard Case Irrigation Access For Minor Operation 3 Units Mechanical/patient Bed With Lock, If Wheeled; With Guard Or Side Rails Specifications: Bed Material: Spraying Steel Structure+abs Headboard Bed Size:2100*970*480mm With Mattress Topper Mattress Topper Material:waterproof Oxford Cloth Cover Mattress Topper Innercore: Coconutplam+high Density Sponge Mattress Topper Size:1920*840*80mm With 12mm Bread Wheel With Brake Three Rocker System Adjustment Lifting Weight:65kg Load-bearing: 180kg 5 Units Bedside Table Specifications: Length: 18.70" (47.5cm) Width: 18.70" (47.5cm) Hieght: 29.50" (75.0cm) Abs Engineering Plastic Material With One Food Board, One Drawer, One Small Door (inner With One Shelf Board) Tower Shelf In Lateral Side, Can Be Hiding With Dia.50mm Castors (4) 1 Unit Nebulizer Specifications: Reliable Piston Compressor Effective Medication Delivery One-button Operation Powerful Compressor And Nebulizer Kit Safety Fuse, Auto Off Anti-dry Lightweight And Compact 1 Piece Neurologic Hammer Size: 18cm Color: Black Material: Pvc, Zinc Alloy 1 Piece Thermometer-oral Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Piece Thermometer-rectal Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free)