Paint Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Marinduque District Engineering Office Boac, Marinduque, Mimaropa (region Iv-b) Invitation To Bid For Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Completion Of Multi-purpose Building (phase 2), Barangay Bintakay, Mogpog, Marinduque 1. The Dpwh-marinduque District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 2,964,800.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ea0043 - Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Completion Of Multi-purpose Building (phase 2), Barangay Bintakay, Mogpog, Marinduque. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-marinduque District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Completion Of Multi-purpose Building (phase 2), Barangay Bintakay, Mogpog, Marinduque Contract Id No. : 25ea0043 Locations : Brgy. Bintakay, Mogpog, Marinduque Scope Of Works : Construction Of 18 Columns And Footings; Roof And Roof Framing For Canopy; Bleachers, Sidings. It Also Includes Painting Works; Formworks; 150mm Chb Walls; Cement Plaster Finish; Plumbing Works; And Electrical Works. Including Zoning Fee/locational Clearance, Professional Fee, Filing Fee, Occupancy Permit And Electrical Fee. (see Plans For Details) Approved Budget For The Contract : Php 2,964,800.00 Contract Duration : 105 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidders Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of At Least C&d For Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Dpwh-marinduque District Engineering Office And Inspect The Bidding Documents At Dpwh Marinduque Deo, Boac, Marinduque During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 02-21, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-marinduque District Engineering Office Will Hold A Pre-bid Conference On January 09, 2025, 9:00 A.m. At The Dpwh Marinduque Deo, Boac, Marinduque And Through Videoconferencing/webcasting Via Microsoft Teams, Which Shall Be Open To Prospective Bidders Via This Link Https://teams.microsoft.com/l/meetup-join/19%3ameeting_yzblzdhlyjitymmxmy00odgyltk2ywqtnwuwmdfhyjuxmwi2%40thread.v2/0?context=%7b%22tid%22%3a%22b9e41a5f-4398-4578-89cf-6d3cdb824dcb%22%2c%22oid%22%3a%2267f51522-68c8-45e4-b629-a2cd72ac069a%22%7d. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 7. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_marinduque@dpwh.gov.ph For Electronic Submission On Or Before January 21, 2025, 10:00 Am. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 21, 2025, 10:00 Am, Immediately After The Deadline For The Submission Of Bid At Dpwh Marinduque Deo, Boac, Marinduque And Through Microsoft Teams With The Link Indicated In The Bds Itb Clause 17.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 13. The Dpwh-marinduque District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Fernan S. Diaz Chief, Planning And Design Section Bac Chairperson Boac, Marinduque (042) 332-0806 Diaz.fernan@dpwh.gov.ph Julito M. Maglacas Engineer Iii Head, Bac Secretariat Boac, Marinduque (042) 332-1086 0915-738-6644 Maglacas.julito@dpwh.gov.ph Date: January 02, 2025

Details: Description Republic Of The Philippines Department Of Public Works And Highways Marinduque District Engineering Office Boac, Marinduque, Mimaropa (region Iv-b) Invitation To Bid For Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Libas, Buenavista, Marinduque 1. The Dpwh-marinduque District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 13,846,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ea0042 - Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Libas, Buenavista, Marinduque. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-marinduque District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Libas, Buenavista, Marinduque Contract Id No. : 25ea0042 Locations : Brgy. Libas, Buenavista, Marinduque Scope Of Works : Construction Of 13 Columns And Footings; Beams; Stairs; Roof And Roof Framing; Slab On Fill; Suspended Slab; Sun Breaker; Ramp; Cistern Tank; Septic Tank; Comfort Rooms. It Also Includes Complete Sets Of Doors And Windows; Painting Works; Formworks; 100mm And 150mm Chb Walls; Fire Exit; Waterproofing; Cement Plaster Finish; Tileworks; Ceiling Works; Plumbing Works; And Electrical Works. Including Zoning Fee/locational Clearance, Professional Fee, Filing Fee, Occupancy Permit And Electrical Fee. (see Plans For Details) Approved Budget For The Contract : Php 13,846,000.00 Contract Duration : 210 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidders Is Contained In The Documents, Particularly, In Section Ii (instruction To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of At Least C&d For Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Dpwh-marinduque District Engineering Office And Inspect The Bidding Documents At Dpwh Marinduque Deo, Boac, Marinduque During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 02-21, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-marinduque District Engineering Office Will Hold A Pre-bid Conference On January 09, 2025, 9:00 A.m. At The Dpwh Marinduque Deo, Boac, Marinduque And Through Videoconferencing/webcasting Via Microsoft Teams, Which Shall Be Open To Prospective Bidders Via This Link Https://teams.microsoft.com/l/meetup-join/19%3ameeting_yzblzdhlyjitymmxmy00odgyltk2ywqtnwuwmdfhyjuxmwi2%40thread.v2/0?context=%7b%22tid%22%3a%22b9e41a5f-4398-4578-89cf-6d3cdb824dcb%22%2c%22oid%22%3a%2267f51522-68c8-45e4-b629-a2cd72ac069a%22%7d. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 7. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_marinduque@dpwh.gov.ph For Electronic Submission On Or Before January 21, 2025, 10:00 Am. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 21, 2025, 10:00 Am, Immediately After The Deadline For The Submission Of Bid At Dpwh Marinduque Deo, Boac, Marinduque And Through Microsoft Teams With The Link Indicated In The Bds Itb Clause 17.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 13. The Dpwh-marinduque District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Fernan S. Diaz Chief, Planning And Design Section Bac Chairperson Boac, Marinduque (042) 332-0806 Diaz.fernan@dpwh.gov.ph Julito M. Maglacas Engineer Iii Head, Bac Secretariat Boac, Marinduque (042) 332-1086 0915-738-6644 Maglacas.julito@dpwh.gov.ph Date: January 02, 2025

Details: Description Republic Of The Philippines Department Of Public Works And Highways Marinduque District Engineering Office Boac, Marinduque, Mimaropa (region Iv-b) Invitation To Bid For Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Rehabilitation Of Multi-purpose Building, Barangay Silangan, Mogpog, Marinduque 1. The Dpwh-marinduque District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 4,944,800.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ea0038 - Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Rehabilitation Of Multi-purpose Building, Barangay Silangan, Mogpog, Marinduque. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-marinduque District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Rehabilitation Of Multi-purpose Building, Barangay Silangan, Mogpog, Marinduque Contract Id No. : 25ea0038 Locations : Mogpog, Marinduque Scope Of Works : Construction Of 10 Columns And Footings; Tie Beams; Roof Beams; Roof Frame And Roofing; Stainless Steel Gutter With Roof Drains; 25m X 30m Flooring; Ramp; Stair; Concrete Platform; Concrete Moulding; Stage; Complete Set Of Doors And Windows; Plastering; Septic Tank; Earthworks; Steel Works; Ceiling Works; Stainless Steel Railings; Tile Works; Painting Works; Plumbing Works; And Electrical Works. Including Zoning Fee/locational Clearance; Filing Fee; Occupancy Permit; Professional Fee; And Electrical Fee. Approved Budget For The Contract : Php 4,944,800.00 Contract Duration : 120 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidders Is Contained In The Documents, Particularly, In Section Ii (instruction To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of At Least C&d For Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Dpwh-marinduque District Engineering Office And Inspect The Bidding Documents At Dpwh Marinduque Deo, Boac, Marinduque During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 02-21, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-marinduque District Engineering Office Will Hold A Pre-bid Conference On January 09, 2025, 9:00 A.m. At The Dpwh Marinduque Deo, Boac, Marinduque And Through Videoconferencing/webcasting Via Microsoft Teams, Which Shall Be Open To Prospective Bidders Via This Link Https://teams.microsoft.com/l/meetup-join/19%3ameeting_yzblzdhlyjitymmxmy00odgyltk2ywqtnwuwmdfhyjuxmwi2%40thread.v2/0?context=%7b%22tid%22%3a%22b9e41a5f-4398-4578-89cf-6d3cdb824dcb%22%2c%22oid%22%3a%2267f51522-68c8-45e4-b629-a2cd72ac069a%22%7d. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 7. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_marinduque@dpwh.gov.ph For Electronic Submission On Or Before January 21, 2025, 10:00 Am. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 21, 2025, 10:00 Am, Immediately After The Deadline For The Submission Of Bid At Dpwh Marinduque Deo, Boac, Marinduque And Through Microsoft Teams With The Link Indicated In The Bds Itb Clause 17.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 13. The Dpwh-marinduque District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Fernan S. Diaz Chief, Planning And Design Section Bac Chairperson Boac, Marinduque (042) 332-0806 Diaz.fernan@dpwh.gov.ph Julito M. Maglacas Engineer Iii Head, Bac Secretariat Boac, Marinduque (042) 332-1086 0915-738-6644 Maglacas.julito@dpwh.gov.ph Approved By: Fernan S. Diaz Bac Chairperson Date: January 02, 2025

Details: Description Republic Of The Philippines Department Of Public Works And Highways Marinduque District Engineering Office Boac, Marinduque, Mimaropa (region Iv-b) Invitation To Bid For Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building (covered Court), Brgy. Caigangan, Buenavista, Marinduque 1. The Dpwh-marinduque District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 6,924,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ea0046 - Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building (covered Court), Brgy. Caigangan, Buenavista, Marinduque. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-marinduque District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building (covered Court), Brgy. Caigangan, Buenavista, Marinduque Contract Id No. : 25ea0046 Locations : Brgy. Caigangan, Buenavista, Marinduque Scope Of Works : Construction Of 16 Columns And Footings; Footing Tie Beams; Roof Beams; Slab On Fill; Roof Framing And Roofing Works; Sidings. It Also Includes Electrical Room; Concrete Pedestal; Complete Sets Of Doors And Windows; Painting Works; Formworks; 100mm Chb Walls; Cement Plaster Finish; Storm Drainage And Downspout; Waterproofing; Electrical Works And Solar Panel With Inverter, Battery And Other Devices; Zoning Fee/locational Clearance, Professional Fee, Filing Fee, Occupancy Permit And Electrical Fee. (see Plans For Details) Approved Budget For The Contract : Php 6,924,000.00 Contract Duration : 175 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidders Is Contained In The Documents, Particularly, In Section Ii (instruction To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of At Least C&d For Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Dpwh-marinduque District Engineering Office And Inspect The Bidding Documents At Dpwh Marinduque Deo, Boac, Marinduque During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 02-21, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 10,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-marinduque District Engineering Office Will Hold A Pre-bid Conference On January 09, 2025, 9:00 A.m. At The Dpwh Marinduque Deo, Boac, Marinduque And Through Videoconferencing/webcasting Via Microsoft Teams, Which Shall Be Open To Prospective Bidders Via This Link Https://teams.microsoft.com/l/meetup-join/19%3ameeting_yzblzdhlyjitymmxmy00odgyltk2ywqtnwuwmdfhyjuxmwi2%40thread.v2/0?context=%7b%22tid%22%3a%22b9e41a5f-4398-4578-89cf-6d3cdb824dcb%22%2c%22oid%22%3a%2267f51522-68c8-45e4-b629-a2cd72ac069a%22%7d. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 7. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_marinduque@dpwh.gov.ph For Electronic Submission On Or Before January 21, 2025, 10:00 Am. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 21, 2025, 10:00 Am, Immediately After The Deadline For The Submission Of Bid At Dpwh Marinduque Deo, Boac, Marinduque And Through Microsoft Teams With The Link Indicated In The Bds Itb Clause 17.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 13. The Dpwh-marinduque District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Fernan S. Diaz Chief, Planning And Design Section Bac Chairperson Boac, Marinduque (042) 332-0806 Diaz.fernan@dpwh.gov.ph Julito M. Maglacas Engineer Iii Head, Bac Secretariat Boac, Marinduque (042) 332-1086 0915-738-6644 Maglacas.julito@dpwh.gov.ph Approved By: Fernan S. Diaz Bac Chairperson Date: January 02, 2025

Details: Description Republic Of The Philippines Department Of Public Works And Highways Marinduque District Engineering Office Boac, Marinduque, Mimaropa (region Iv-b) Invitation To Bid For Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Tambunan, Boac, Marinduque 1. The Dpwh-marinduque District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 6,920,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ea0037 - Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Tambunan, Boac, Marinduque. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-marinduque District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Basic Infrastructure Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Tambunan, Boac, Marinduque Contract Id No. : 25ea0037 Locations : Brgy. Tambunan, Boac, Marinduque Scope Of Works : Construction Of 13 Columns And Footings; Beams; Stairs; Roof And Roof Framing; Slab On Fill; Suspended Slab; Sun Breaker; Ramp; Cistern Tank; Septic Tank; Comfort Rooms. It Also Includes Complete Sets Of Doors And Windows; Painting Works; Formworks; 100mm And 150mm Chb Walls; Fire Exit; Waterproofing; Cement Plaster Finish; Tileworks; Ceiling Works; Plumbing Works; And Electrical Works. Including Zoning Fee/locational Clearance, Professional Fee, Filing Fee, Occupancy Permit And Electrical Fee. (see Plans For Details) Approved Budget For The Contract : Php 6,920,000.00 Contract Duration : 175 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidders Is Contained In The Documents, Particularly, In Section Ii (instruction To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of At Least C&d For Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Dpwh-marinduque District Engineering Office And Inspect The Bidding Documents At Dpwh Marinduque Deo, Boac, Marinduque During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 02-21, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 10,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-marinduque District Engineering Office Will Hold A Pre-bid Conference On January 09, 2025, 9:00 A.m. At The Dpwh Marinduque Deo, Boac, Marinduque And Through Videoconferencing/webcasting Via Microsoft Teams, Which Shall Be Open To Prospective Bidders Via This Link Https://teams.microsoft.com/l/meetup-join/19%3ameeting_yzblzdhlyjitymmxmy00odgyltk2ywqtnwuwmdfhyjuxmwi2%40thread.v2/0?context=%7b%22tid%22%3a%22b9e41a5f-4398-4578-89cf-6d3cdb824dcb%22%2c%22oid%22%3a%2267f51522-68c8-45e4-b629-a2cd72ac069a%22%7d. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 7. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_marinduque@dpwh.gov.ph For Electronic Submission On Or Before January 21, 2025, 10:00 Am. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 21, 2025, 10:00 Am, Immediately After The Deadline For The Submission Of Bid At Dpwh Marinduque Deo, Boac, Marinduque And Through Microsoft Teams With The Link Indicated In The Bds Itb Clause 17.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 13. The Dpwh-marinduque District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Fernan S. Diaz Chief, Planning And Design Section Bac Chairperson Boac, Marinduque (042) 332-0806 Diaz.fernan@dpwh.gov.ph Julito M. Maglacas Engineer Iii Head, Bac Secretariat Boac, Marinduque (042) 332-1086 0915-738-6644 Maglacas.julito@dpwh.gov.ph Approved By: Fernan S. Diaz Bac Chairperson Date: January 02, 2025

Description: Contact Information|4|n711.10|ga3|717-605-1318|jordan.d.burt.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|combo |n/a|tbd|n00104|tbd|tbd|w25g1u|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| buy American --free Trade Agreements--balance Of Payments Program - Basic (feb2024))|11|||||||||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (feb 2024)|13|334511|1,350|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||| the Purpose Of This Amendment Is To Notate An Increase In Qty For Solicitation# N00104-24-q-ud89 From 600 To 2,144 (a +1,544 Unit Increase). offer Due Date Is Hereby Extended To 04 Feb 2025. all Other Terms And Conditions Remain Unchanged. 1. When Submitting Quotes, Make Sure You Specify Any Exceptions, I.e. Mil-stdpackaging, Mil-std Labeling, Inspection And Acceptance Locations, Packaginghouses, Surplus Material, Etc. If No Exceptions Are Indicated Or Received,award Will Be Based Upon Solicitation requirements. Changes Or Requests Forchanges After Award Will Have Consideration Costs Deducted From Unit Price. 2. If Supplies Will Be Packaged At A Location Different From The Offeroraddress, The Offeror Shall Provide The Name, Street Address And Cage Code Ofthe Packaging Facility. 3. Please Do Not Include Shipping Costs. Shipping/tranportation Assitance Will Be In Accordance With Wsstermfz02. 4. If You Are Not The Manufacturer Of The Material You Are Offering, You Muststate Who The Manufacturer Is (name & Cage Code) And Be Able To Providetraceability Information If Requested. Examples Of Traceability Documentationinclude But Are Not Limited To The following: Purchase Order/invoice Betweenyou And The Manufacturer Identifying The Part Number, Revision Level Andquantities & Manufacturer's Packing Slip Or Certification Identifying The Partnumber, Revision Level And Quantities. 5. Source Inspection Is Required For This Item. Please Provide Any Additionalcosts Associated With Source Inspection Into Your Unit Price. 6. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders,delivery Orders And Modifications) Related To This Procurement Are Consideredto Be "issued" By The Government When Copies Are Either Deposited In The Mail,transmitted By Fax, Or Sent By other Electronic Commerce Methods, Such Asemail. The Government's Acceptance Of The Contractor's Proposal Constitutesbilateral Agreement To "issue" Contractual Documents As Detailed Herein. 7. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Tile,rubber . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2 Identification Of Classified Documents - This Contract/purchase Order Requires The Contractor To Have Authorized Access To Classified Documents In Accordance With The Attached Contract Security Classification Specification (dd Form 254). The Classified Documents And Security Level Are: ;secret; document Ref Data=mil-std-129 | | |p |041029|a| |03| document Ref Data=mil-std-130 | | |n |121116|a| | | document Ref Data=iso 9001 | | | | |a| | | document Ref Data=iso 9002 | | | | |a| | | document Ref Data=mil-i-45208 | | |a |961001|a|2 | | 3. Requirements 3.1 ;the Tile, Type 3r, Half Round, 4.5 Inch, "paint Not Required", Radar Absorbing Material (ram), Part Number 7338390-2, Design Control Activity Cagec: 34008, Furnished Under This Contract/purchase Order Shall Be Iaw With Dwg 7338390, Material specification, 7538395, Rev B, And Phs&t 7538398. these Drawings And Material Specifications Are Not Furnished As Part Of This Solicitation. The Prior Approved Sources Already Have These Drawings And Specifications In Their Possession.; 3.1.1 ;this Contract/purchase Order Serves As The Procurement Vehicle To Acquire Radar Absorbing Material (ram) In The Form Of Type 3r Materials For Installation On-board U.s. Navy Ships. The Design Of The Ram Material Is A Navy Design And Will Not Be allowed To Be Sold, Marketed Or In Any Way Transferred To Other Commercial Or Government Sources Without Written Consent Of Naval Sea Systems Command (navsea 05t1). All Materials Manufactured For This Contract/purchase Order Will Be Manufactured In Accordance with The Material Specification Type 3r (unclassified And Classified), Document Number 7538395. Additionally, Materials Will Need To Be Manufactured Iaw Their Respective Drawings. type 3r Materials Will Be Installed On U.s. Navy Ships. During This Time, The Material Will Be Exposed To A Shipboard Environment That Will Include Significant Fluctuations In Humidity And Temperature, The Corrosive Effects Of Salt Spray And The Damage Caused by Uv Exposure.; 3.2 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.3 ;the Contractor Shall Manufacture All Type 3r Material To Meet All The Requirements In The Material Specification Type 3r (unclassified And Classified). In The Event That There Is A Conflict Between The Text Of This Contract/purchase Order And The refernces And/or Drawings Cited Herein, The Material Specification Shall Take Precedence. Nothing In This Contract/purchase Order, However, Shall Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained.; 3.4 ;assignment Of Serial Numbers - All Materials Will Be Assigned A Sequential Serial Number At The Completion Of The Fabrication Phase. The Assignment Shall Be Done Prior To Performing Any Electrical Testing Or Other Type Of Testing. If The Contractor observes Any Obvious Cosmetic Problems, They Have The Option To Remove The Material Prior To Performing Either Environmental Or Electrical Testing, But This Material Shall Still Receive A Serial Number. The Contractor Shall Be Required To Submit A Report listing The Serial Numbers Of The Materials, Method Of Failure And The Certification Of Destruction Iaw Contract Data Requirements List (cdrl), Di-s-30591, Every Six (6) Months.; 3.5 ;assignment Of Lot Numbers - Lot Size Is Defined As 1000 Type 3r Tiles, Plus Twenty (20), Ordered On A Given Task Order. Lot Numbers Shall Be Associated With Each Item.; 3.6 ;post-production - When The Government Takes Delivery Of The Material, All Requirements Must Be Met.; 3.7 ;ecps, Waivers And Deviations - (far 46.102/46/407): All Critical, Major And Minor Waivers And Deviations Will Be Written On Dd 1694 Forms. The Request Will Be Submitted For Review And Approval/disapproval By Phd Nswc.; 3.8 ;production Lot Test Procedures Are Required As Specified In The Contract Data Requirements List (cdrl) Di-ndti-80603.; 3.8.1 ;the Production Lot Test Procedure Shall Be Submitted And Approved By Phd Nswc, S13 Prior To Commencing Production.; 3.9 ;special Test Equipment: Special Test Equipment Is Required Per The Material Specification (7538395) And Is Not Furnished By The Government.; 3.10 ;special Marking, Packaging And Serial Number Requirements: Special Marking, Packaging And Serialization Are Required By The Pcms, Packaging, Handling, Storage And Transportation Instruction (phs&t), Drawing No. 7538398 And Navsea Drawing Number 7338390.; 3.11 ;security Form Dd 254 (far 53.204-1a): Classified Testing Is Required Per The Material Specification. This Material Requires Strict Accountability, Any Loss Of This Material That Can Not Be Reconciled Shall Be Reported To Phd Nswc, Code S13. Reasonable operational Security Will Be Taken To Ensure That Only Authorized Personnel Are Allowed Access To This Material And Data. Only U.s. Citzens Are Authorized To Accomplish And Partake In The Manufacture, Packaging, Handling, Storage And Transportation Of This material. in Addition A Non-disclosure Statement Must Be Signed, And Returned To The Pco Prior To Receiving Technical Data/specifications From The Isea.; if The Contractor Changes Locations Of The Their Manufacturing Facility Or Goes Through Greater Than 50% Turnover In Personnel In Less Than 2 Months Time, The Government Has The Unilateral Right To Require Requalification Of The New Material And Manufacturing process And No Delays To The Agreed Upon Delivery Schedule Will Be Permitted. If The Contractor Cannot Comply With These Requirements The Government Has The Right To Terminate The Contract For Default Pursuant To Far Clause 52.249-8. 3.12 Security Clearance Required - This Contract/purchase Order Requires The Contractor To Have A Government Security Clearance In Accordance With The Attached Contract Security Classification Specification (dd Form 254). 4. Quality Assurance 4.1 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.2 ;production Lot - Production Lot Acceptance Testing: Suppliers Must Perform 100% Electrical Testing As Stated In The Material Specification (7538395). The Government Reserves The Right To Review And Audit The Suppliers Approved Written Production procedures And Witness Any Production Testing So Stipulated In The Approved Written Procedures. After Each Acceptable Production Lot Run Of (2000 Ea. Plus 20), Suppliers Will Submit Test Specimen Samples (1% Of 2000 Ea.) And Electrical Test Data, In Accordance with The Cdrls, As Specified Elsewhere In This Contract/purchase Order. serial Numbers Of Each Tile Tested Shall Be Annotated On The Test Report. sample Size Of 1% May Be Decreased To .25% After Completion Of The First Two (2) Production Lots At The Discretion Of The Government.; type 3r Visual Inspection Procedure Shall Be Supplied By The Isea To The Successful Contractor At Time Of Award To Aid The Quality Assurance Department To Establish Visual Inspection/general Workmanship Criteria For The Type 3r Tiles. The Hard Copy Document titled "type 3r Visual Inspection Procedure" Latest Revesion In Effect At Time Of Award Shall Be Utilized. the Government Will Have A Completed Test Report Within 60 Days Of Receipt Of The Samples And Subsequent Electrical Test Report For Each Production Lot From The Contractor. 4.2.1 ;these Samples And Data Will Be Used For Compatibility Test Evaluation By Phd. a Written Compatibility Test Report Will Be Submitted To The Procuring Contracting Officer (pco), By Phd. The Pco Will Communicate The Report Results To The Supplier, Notifying Them Of Its Findings.; 4.2.2 ;electrical Testing: The Contractor Shall Comply With All The Requirements Of The Material Specification Identified In Paragraph 2. Any Variance To The Procedures Identified In This Document Must Have Prior Written Approval From The Government. additionally, The Contractor Must Comply With The Following Test Requirements: Material Is To Be Tested Only One Time In The 0 And 90 Degree Orientation Or Parallel And Perpendicular Polarizations. If The Material Does Not Meet The Required Performance Levels Identified In The Material Specification, The Material Is To Be Set Aside without Further Testing. During This Time The Contractor May Choose To Re-work Or Condition The Material. After Re-work Or Conditioning, The Contractor May Test The Material Again To See If It Is Now Within The Specification Requirements. If The Material still Does Not Meet The Minimum Requirements Of The Electrical Specifications It Must Be Set Aside And Not Tested Further. The Last Set Of Test Results For This Tile Will Be Considered It's Final Test Result. The Contractor May Contact The Government To discuss The Disposition Of The Material. This Testing Specifically Precludes Multiple (more Than 2 Test) To Try To Get The Material To Meet The Required Minimum Requirements.; 4.3 Production Lot Test/inspection Report - The Contractor Shall Prepare And Submit A Report In Accordance With The Contract Data Requirements List (dd Form 1423). 4.4 Production Lot Test Approval - Production Lot Test Approval Is Required Prior To Shipment Of The Production Lot. 4.5 ;iso 9001 Is Required To Be Maintained And Be Current, For The Purpose Of Maintaining Engineering Source Approval. Dcma's Only Need To Verify That The iso 9001 Certificate Is Current. approved Sources Must Provide A Pdf Copy Of Their Iso 9001 Certificate When Renewed Or Recertified, To The Appropriate Isea. ; material Failure Adjudication: If The Material Is Found To Be Non-compliant With The Material Specification, The Contractor Shall Be Required To Conduct A Failure Analysis And Shall Take All Necessary Actions To Remediate The Failure At No Cost To The government. Any Such Failure(s) Shall Be Replaced Or Reconditioned By The Contractor To Meet All Requirements Identified In The Material Specification At No Cost To The Government. The Government Has The Right To Retest The Replaced Or Reconditioned Matrerial to Ensure Compliance With The Specification Before Accepting The Material In Question. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. 5.2 ;the Marking Requirements For Both The Marking Of Materials (mil-std-130) and The Outside Container Markings (mil-std-129) Should Be As Follows: dom: Yy/mm/dd inspect/test Date: Yy/mm; mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. date Of First Submission=asreq ;block 16 block 5 - As Specified By Naval Sea Systems Command Drawing 7338390 And 7538395. block 12 - Test Procedures Shall Be Submitted Nlt 30 Days After Contract Award. Approval Or Reason For Disapproval Shall Be Given Nlt 30 Days After Received By Phd Nswc Code S13. block 13 - Nlt 30 Days After Disapproval. ; date Of First Submission=asreq ;block 16 block 5 - Test Reports Shall Be Iaw Naval Sea Systems Command Drawing 7338390 And 7538395. block 12 - Test Report Shall Be Submitted Nlt 15 Days After Completion Of Testing Along With Test Samples To Phd Nswc Code S13.; date Of First Submission=asreq ;block 12 - Contractor Shall Submit A Report Listing The Serial Numbers Of The Material, Method Of Failure And Certification Of Destruction Beginning Six (6) Months After The Start Of Production And Continuing At Six (6) Month Intervals.;

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-01-22 (119) Supply And Delivery Of Service Vehicle Van (negotiated – Two-failed Biddings) Abc: Php 1,676,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through Internal Generated Fund (igf) 2024 And As Per Authority To Purchase Motor Vehicle (apvm) No. Dbm-roxiii-2024-004 Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of One Million Six Hundred Seventy Six Thousand Pesos Only ( Php 1,676,000.00) As To Payment Under The Contract For Supply And Delivery Of Service Van Vehicle (negotiated – Two-failed Biddings). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. This Project Shall Be Completed Within 60 Calendar Days Upon Receipt Of The Notice To Proceed And To Be Picked Up By This Procuring Entity At Its Location And To Wit: Line Item Code Description Qty Unit Of Measure Unit Cost Total Cost 1 Service Vehicle Van 1 Lot 1,676,000.00 1,676,000.00 Technical Specifications Description Van Type, A Large Four-wheel Enclosed Vehicle For Conveying Passengers And/or Hauling Cargo, Traditionally Having Four (4) Doors (two Side Doors For The Driver And Front Passengers, One (1) Or Two (2) Passenger Side Sliding Doors, And A Tailgate. It Has Several Rows Of Folding Or Removable Seats Behind The Front Passenger Seat With At Least 12 Seating Capacity Including Front Passenger. It Has No Luggage Compartment But An Expandable Area At The Rear Which Can Be Used For Luggage, Cargoes, Etc. It Must Be Brand New. Engine Type 4 Cylinder, In-line Dohc 16 Valve Turbocharge With Intercooler Displacement (l) 2.4 - 3.0 L Compression Ratio 15:1 Or Higher Fuel Diesel, Euro 4 Fuel System Common Rail, Direct Injection / Electronic Fuel Injection Or Equivalent Transmission Manual Transmission ( Minimum 5 Speed) Steering Power Assist, Steering Rack Suspension, Front Wishbone & Coil Spring With Stabilizer (manufacturer Standard) Or Torsion Bar With Stabilizer Suspension, Rear Leaf Spring With Telescopic Shock Absorbers (manufacturer Standard) Brakes Ventilated Disk Front And Drum Type On Rear Or All Disk Brakes With Abs Wheels 15 Or 16 Inches Steel Or Alloy Wheels. Safety Driver And Front Passenger Is Equipped With Emergency Locking Retractor 3 Point Seatbelt And Airbag. Rear Passenger Equipped With 3 Pt Emergency Locking Retractor Seatbelts. Accessories 1. Dual Air-conditioned. 2. Power Window. 3. 12 Volts Power Outlet. 4. Early Warning Devices. 5. Front And Rear Camera With Recording. 6. Reserve Tire, Same Size With The Other Four 7. Hydraulic Jack (alligator Type) And Tire Wrench. 8. Operation Manual Body Paint Color White Other Requirements 1. Supplier Must Have Service Center Located In Mindanao Area. 2. Free Lto Registration And Comprehensive Insurance. Compliance To Denr Emission Standard. 3. Supplier Must Be An Authorized Motor Vehicle Dealer / Distributor With Service Center Availability Within Mindanao Area. 4. Installation Of Decals Like Crh Logo, And The Work “for Official Use Only” Warranty 1 Year Warranty On Parts And Labor Delivery Terms 60 Calendar Days Upon Receipt Of The Notice To Proceed And To Be Picked Up By This Procuring Entity At Its Location. Terms Of Payment. Payment Shall Be Made Upon Complete Delivery. Necessary Documents Are Required In Compliance With Auditing Rules And Regulations. Post Qualification: A Site Visit Will Be Conducted Or A Thorough Verification Of The Submitted Bidding Documents Of The Bidder Like Their Technical Specification, Brochure, Contract Performance And Other Related And Significant Documents For This Project. Validity Of The Contract : Without Prejudice To The Provision Of Applicable Laws, Rules And Guidelines, The Contract Shall Be Automatically Terminated Under The Following Conditions: A. When The Total Quantity Specified In The Contract Has Been Exhausted And Commissioned; Or B. For Any Justifiable Reason Ground Where The Contract Will Not Redound To The Benefit Of The Government Or There Is Violation Of The Contract. General Conditions All Other Rules Governing Contract Implementation And Termination Under Ra 9184 And Its Irr, And Relevant Procurement Policies Shall Be Applicable. Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Above-entitled Procurement Project. Delivery Of The Goods Is Required As Specified In Section Vi (schedule Of Requirements) Of The Bidding Documents. Bidders Should Have Completed Within The Period Of Five (5) Years From The Opening Of Bids. 3. Section 23.4.2.4 Of Irr Of Ra 9184. The Bidder Must Have Completed An Slcc That Is “similar” To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Psa Consumer Price Indices, Must Be At Least Fifty Percent (50%) Of The Abc. Moreover, A Contract Shall Be Considered “similar” To The Contract To Be Bid If It Has The Same Major Categories Of Work On Provision Of Motor Vehicles Or Service Vehicle Van. The Procuring Entity May Clarify In The Bidding Documents What Is Regarded As Major Categories Of Work. (23.5.2.5a) For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 5. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 23, 2024 To January 22, 2025 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference January 07, 2025 At 9:00 O’clock In The Morning Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/83489755748?pwd=hzz46mwgn5hpmqcmrssttohzxy6ve0.1 Meeting Id: 834 8975 5748 Passcode: 766556 Deadline Of Submission Of Bids January 22, 2025 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Please Be Advised That Failure To Submit Bidding Documents To The Designated Official Email Address Will Result In Automatic Rejection And Disqualification. Opening Of Bids January 22, 2025 At 2:00 P.m. Via Zoom Platform. Link: Join Zoom Meeting Https://us06web.zoom.us/j/82443783945?pwd=rbrilgn9em70shclcpe96rgz7iagep.1 Meeting Id: 824 4378 3945 Passcode: 750393 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1hugqmfundc8omkq6fmbgqdwmjelpgxz7?usp=sharing Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 7. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 8. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before January 22, 2025 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 22, 2025 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend In An Online Bidding. Late Bids Shall Not Be Accepted. 9. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 10. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 12. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 13. Furthermore, Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 14. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 15. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 16. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Fermarie C. Dulpina, Rmt, Mpa, Jd Chief Health Program Officer Chairman, Bids And Awards Committee

Details: Description No. Unit Description Qty 1 Set 2000 Lts Vertical Stainless Water Tank 5 Specification: Capacity: 2000 Lts Diameter: 118 M Height: 220 M Provision: Accessories: Ladder, Air Vent & Achor 2 Set 3200 Lts Vertical Stainless Water Tank 6 Specification: Capacity: 3200 Lts Diameter: 136 M Height: 260 M Provision: Accessories: Ladder, Air Vent & Achor 3 Set 4000 Lts Vertical Stainless Water Tank 1 Specification: Capacity: 4000 Lts Diameter: 183 M Height: 237 M Provision: Accessories: Ladder, Air Vent & Achor 4 Set 2800 Lts Vertical Stainless Water Tank 1 Specification: Capacity: 2800 Lts Diameter: 136 M Height: 260 M Provision: Accessories: Ladder, Air Vent & Achor 5 Rolls 1 1/4"ø X 60m Hdpe Sdr 11 Black 41 6 Pcs 1 1/4"ø Hdpe Straight Coupler 35 7 Pcs 1 1/4"ø Hdpe Tee Coupler 5 8 Pcs 1 1/4"ø X 1"ø Saddle Clamp 28 9 Pcs 1"ø X 4" G.i Nipple 493 10 Pcs 1"ø Gate Valve 74 11 Pcs 1"ø G.i. Tee 50 12 Pcs 1"ø G.i. Plug 96 13 Pcs 1"ø X 1/2"ø G.i. Tee Reducer 324 14 Pcs 1 1/4"ø Hdpe End Cap 6 15 Pcs Water Meter (plastic) - 1/2"ø 120 16 Rolls 1/2"ø X 300m Hdpe Sdr 11 Black 19 17 Pcs 1/2"ø Gate Valve 122 18 Pcs 1/2"ø G.i. Union 176 19 Pcs Hacksaw Blade 160 20 Rolls Teflon Tape (big) 459 21 Pcs 1 1/4"ø X 1"ø Hdpe Coupler Reducer 9 22 Pcs 1"ø G.i. Elbow 65 23 Pcs 1"ø Float Valve 12 24 Pcs 1"ø Ppr Pipe 24 25 Pcs 1"ø G.i. Elbow 45˚ 12 26 Pcs 1"ø G.i. Union 139 27 Bags Cement 111 28 Cu.m. Gravel 10.5 29 Cu.m. Sand 13 30 Pcs 12mm Ø Rsb X 6.0 94 31 Kl C.w. Nails 3" 9.5 32 Kl #16 Gi Tie Wire 9 33 Pcs 4' X 8' X 1/2" Thk. Ordinary Flywood 9 34 Bdft 2' X 3' X 12' - Cocolumber 252 35 Rolls 2"ø X 60m Hdpe Sdr 11 Black 100 36 Pcs 2"ø Hdpe Straight Coupler 107 37 Pcs 2"ø Hdpe Tee Coupler 7 38 Pcs 2"ø X 1"ø Saddle Clamp 14 39 Pcs 2"ø Hdpe End Cap 2 40 Pcs 1 1/2"ø X 1"ø Hdpe Coupler Reducer 8 41 Pcs 1 1/2"ø X 60m Hdpe Sdr 11 Black 60 42 Pcs 2"ø X 1 1/2"ø Hdpe Coupler Reducer 12 43 Pcs 2"ø X 1/2"ø Hdpe Coupler Reducer 1 44 Pcs 1 1/2"ø X 1/2"ø Hdpe Coupler Reducer 1 45 Pcs 2"ø Gate Valve 23 46 Pcs 2"ø X 6" G.i. Nipple 61 47 Pcs 2"ø G.i. Union 70 48 Pcs 3"ø Gate Valve 3 49 Pcs 3"ø X 12" G.i. Nipple 8 50 Pcs 3"ø Sleeve Type Coupling 6 51 Pcs 1 1/2"ø G.i. Tee 7 52 Pcs 1 1/2"ø X 6" G.i. Nipple 13 53 Pcs 1 1/2"ø X 1/2"ø G.i. Tee Reducer 50 54 Pcs 1 1/2"ø G.i. Plug 10 55 Pcs 1/2"ø G.i. Plug 40 56 Pcs 3"ø X 6.0m Pvc Pipe-s-10' C-100 W/ Oring 74 57 Pcs 2 1/2"ø X 3"ø G.i. Bell Reducer 1 58 Pcs 3"ø X 1 1/2" Ø Saddle Clamp 1 59 Pcs 2 1/2"ø X 2"ø Hdpe Coupler Reducer 2 60 Pcs 2"ø X 1 1/2"ø Tee Coupler Reducer 7 61 Pcs 3"ø X 3"ø Pvc Elbow & Double Hub (blue) 2 62 Pcs 1 1/2"ø Hdpe Sraight Coupler 47 63 Pcs 1 1/2"ø Gate Valve 13 64 Rolls 2 1/2"ø X 60m Hdpe Sdr 11 Black 4 65 Pcs 2 1/2"ø Hdpe Straight Coupler 4 66 Pcs 3"ø X 2 1/2"ø G.i. Tee Reducer 1 67 Pcs 2 1/2"ø X 12" G.i. Nipple 2 68 Pcs 2 1/2"ø Gate Valve 1 69 Pcs 2 1/2"ø Sleeve Type Coupling 2 70 Pcs 1"ø Hdpe Straight Coupler 104 71 Pcs 1"ø G.i. Coupling 39 72 Pcs 75mm X 75mm X 6mm Angles Bar (6m) 7 73 Pcs 50mm X 50mm X 5mm Angles Bar (6m) 22 74 Pcs 10mm Steel Plate (1.2 M X 2.4 M) 2 75 Pcs M16 Anchor Bolts 26 76 Sets M12 Bolts, Nuts, Washer 65 77 Kls Welding Rods 32 78 Lts Anti-corrosion Primer 7 79 Lts Outdoor Paint (enamel) 7 80 Bags Non-shrink Cementitous Grout (20kls) 2 81 Pcs 1 1/4"ø X 3/4"ø Tee Coupler Reducer 2 82 Rolls 1"ø X 100m Hdpe Sdr 11 Black 97 83 Pcs 1 1/2"ø X 1 1/4"ø Hdpe Coupler Reducer 7 84 Pcs 1 1/2"ø X 1"ø Saddle Clamp 5 85 Pcs 1"ø Hdpe Tee Coupler 7 86 Pcs 1"ø X 1/2"ø Tee Coupler Reducer 4 87 Pcs 1 1/2"ø Hdpe End Cap 2 88 Pcs 1"ø Hdpe End Cap 2 89 Pcs 1 1/2"ø X 1 1/4"ø Tee Coupler Reducer 1 90 Pcs 1 1/2"ø G.i. Union 46 91 Pcs 1 1/4"ø G.i. Union 49 92 Pcs 1"ø X G.i. Pipe Sch-40 X 6.0m 25 93 Pcs 1 1/4"ø Gate Valve 14 94 Pcs 1 1/2"ø X 4" G.i. Nipple 82 95 Pcs 1 1/4"ø X 4" G.i. Nipple 26 96 Pcs 1/2"ø Hdpe Straight Coupler 12 97 Pcs 1/2"ø X 4" G.i. Nipple 156 98 Pcs 1 1/2" Ø Hdpe Straight Coupler 12 99 Rolls 2" Ø X 60m Hdpe Sdr 11 Black 11 100 Pcs 1"ø X 1/2"ø Hdpe Coupler Reducer 1 101 Pcs 1 1/2"ø Hdpe Tee Coupler 2 102 Pcs 1/2"ø Hdpe Tee Coupler 2 103 Pcs 2"ø X 1 1/2"ø Bell Reducer 2 104 Pcs 1 1/2"ø X 1 1/4"ø Bell Reducer 1 105 Pcs 1 1/4"ø X 1"ø Bell Reducer 1 106 Pcs 1 1/4"ø G.i. Pipe Sch-40 X 6.0m 56 107 Pcs 1 1/4"ø G.i. Coupling 56 108 Pcs 1 1/4"ø X 2" G.i. Nipple 44 109 Pcs 1 1/4"ø X G.i. Tee 10 110 Pcs 1"ø G.i. Pipe Sch-40 X 6.0m 32 111 Pcs 1/2"ø G.i. Pipe Sch-40 X 6.0m 32 112 Pcs 1/2"ø G.i. Coupling 20 113 Pcs 1 1/4"ø G.i. Elbow 20 114 Pcs 1 1/4"ø G.i. Elbow 45 Deg 20 115 Pcs 2"ø Sleeve Type Coupling 5 116 Rolls 3/4"ø X 150m Hdpe Sdr 11 Black 4 117 Pcs 1 1/2"ø X 1"ø Bell Reducer 2 118 Pcs 1"ø X 3/4"ø Bell Reducer 1 119 Pcs 3/4"ø Hdpe Straight Coupler 4 120 Pcs 3/4"ø G.i. Union 2 121 Pcs 1 1/2"ø X 1/2"ø Tee Coupler Reducer 3 122 Pcs 2"ø G.i. Pipe Sch-40 X 6.0m 4 123 Pcs 1/2"ø Pvc Pipe 3.0m 4 124 Pcs 2"ø X 12" G.i. Nipple 5 125 Pcs 2"ø G.i. Elbow 6 126 Pcs 1/2"ø Pvc Elbow 8 127 Pcs 1/2"ø Pvc Tee 6 128 Pcs 1/2"ø Ball Valve 3 129 Can Pvc Pipe Cement 400cc 1 130 Pcs 4"ø X 6.0m Pvc Pipe 2 131 Pcs 4"ø Pvc Elbow 2 132 Pcs 4"ø Pvc Tee 4 133 Pcs 3"ø X 1"ø Saddle Clamp 2

Details: *****see Piee Notice***** table Of Contents 1. General 1.1 General Overview Of Procurement Process 1.2 General Overview Of Contract 2. Basis For Award 3. Bid Requirements 3.1 Pre-bid Conference And Site Visit 3.2 Bid Submission Instructions 3.3 Pre-bid Inquiries (ppis) 4. Attachments: May Be Located On The Contract Opportunities attachment 1 – Appendix B Statement Of Work attachment 2 – Pre-proposal Inquiry (ppi) Form attachment 3 – Excavation And Handling Of Contaminated Material attachment 4 – Supplementary Instructions For Paving Idiq attachment 5 – Activity Hazard Analysis attachment 6 – Machinery And Mobile Equipment List attachment 7 – Contractor Production Report attachment 8 – Navfac Initial Mishap Notice Form attachment 9 – Contractor Bid Sheet Elins attachment 10 – Piee Vendor Access Instructions _______________________________________________________________________________ general 1.1 General Overview Of Procurement Process procurement Method: This Acquisition Will Be Advertised Utilizing Far Part 14 – Sealed Bidding Resulting In A Firm Fixed Price (ffp) Contract For Construction Services. competition Requirements: This Solicitation Is Being Solicited As A Competitive, 8(a) Set-aside. naics: The Appropriate Naics Code For This Procurement Is 237310 – Highway, Street, And Bridge Construction, And The Small Business Size Standard Is $45,000,000. magnitude Of Construction: In Accordance With Far 36.204 (g), The Total Estimated Magnitude Of Construction For This Contract (base Period Plus Option Years) Is Between $5,000,000 And $10,000,000. 1.2 General Overview Of Contract contract Title: Indefinite Delivery Indefinite Quantity Contract For Miscellaneous Paving Maintenance And Repair Contract, Nsa Mechanicsburg /nsa Philadelphia Sites work Order # 1808625 – Provided Via Attachment 1 description: This Is A Regional Indefinite Delivery / Indefinite Quantity (idiq) Contract To Provide Paving, Curbs, Slabs, Striping, Repair, Excavation, Paving Sweeping, And Snow Removal Work Located Within The Area Of Responsibility Of Navfacv Mid-atlantic, Public Works Department pennsylvania, Facilities Engineering And Acquisition Division Sites. types Of Work To Be Included In This Contract Are As Follows, But Are Not Limited To: Excavation and Removal Or Replacement Of Deteriorated Paved Surfaces; Construction Of New Stone And Bituminous Surfaces; Overlay Of Existing Ramp Slabs And Surfaces; Spot Patching Of Existing Bituminous Paving; Stabilization Of Shoulders And Application Of Bituminous Tack Coat, Surface Treatment, And Sealing Of Cracks; Removal Or Replacement Of Concrete Curbs, Sidewalks, Ramps, Windowsills, Floors, Walls, Block, Bricks And Bituminous Surface Areas; Saw Cutting Of Asphalt And Concrete, Resetting Manholes And Catch Basins, Resetting Curbing, And, Wheel Stops; Crack And Joint Repairs; Street Marking Of Driving Surfaces Which, Are To Be Thoroughly Cleaned Of Dust, Dirt, And Other Granular Debris; Removal Of Existing Paint, And Other Coatings Adhering To The Surface; Application Of Sod And Seeding, Or Reseeding As Required; Disposal Of All Removed Materials Off Government Property; Snow Removal To Locations On-base As Needed; And Engineering Drawings And Specifications. term Of The Contract: The Duration Of The Contract Will Be For A Five (5) Year Ordering Period From The Date Of Contract Award. The Total Five-year Ordering Period Includes A Base Period And Four 12-month Option Periods Not To Exceed Sixty (60) Months From The Date Of Contract Award. Refer To Section 00 70 00 – Conditions Of The Contract, Far 52.217-9, Option To Extend The Term Of The Contract (mar 2000). minimum Guarantee: The Government Will Issue A Minimum Guarantee In The Amount Of $5,000.00 To The Successful Offeror Via Task Order. The Minimum Guarantee Covers The Full Term Of The Contract To Include All Option Years. construction Wage Requirements: General Wage Determinations Covering The Areas Of Responsibility Are Included In This Solicitation. The Most Current Wage Decision Will Be Incorporated Into The Contract At The Time Each Option Is Exercised. Refer To Section 00 73 00 Of The Solicitation. indefinite Quantity Individual Contract Line Item Quantities: Once The Estimated Quantities For Individual Line Items Shown In The Schedule Have Been Ordered, Additional Quantities May Be Ordered As Long As The Overall Not-to-exceed (nte) Amount Of The Contract Per Year Is Not Exceeded And The Contractor Agrees By Signing The Task Order. basis For Award evaluation Of Bids: Award Will Be Made To The Responsible Bidder Whose Bid, Conforming To The Invitation For Bid Requirements, Will Be Most Advantageous To The Government, Considering Only Price And Price Related Factors Included In The Invitation For Bid. Bidders Shall Submit A Lump Sum Price For Section 001000 -solicitation, Clin 0001 (base Year), Clin 0002 (option Year 1), Clin 0003 (option Year 2), Clin 0004 (option Year 3), Clin 0005 (option Year 4) And Unit Prices For Elins A001-a099, B001-b099, C001-c099, D001-d099, And E001-e099 For Each Clin. For Purposes Of Evaluating Bids For Award, The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. Refer To Section 00 21 13, Far 52.217-5 Evaluation Of Options (jul 1990). 3. Bid Requirements 3.1 Pre-bid Conference And Site Visit: A Site Visit Is Not Anticipated For This Procurement. 3.2 Bid Submission Instructions: the Bidder Shall Submit One Electronic Bid With The Following: cover Page With Solicitation Number, Solicitation Title, Offeror Name, Address, Phone Number, Fax Number, Unique Entity Identifier (uei), Employer Identification Number (ein), Cage Code, Point Of Contact (poc), Poc Title, Poc Phone Number, And Poc Email Address; completed Sf 1442 Signed With All Amendments Acknowledged; exhibit Line Items (elins), Excel Spreadsheet (electric Copy) A001-e099 For Each Clin. solicitation Contract Form Clins 0001, 0002, 0003, 0004, 0005 (base And All Option Years). copy Of Representation And Certifications And Proof Of Registration In System For Award Management (sam); confirmation Of Filing Of Veterans’ Employment And Training (vets) Vets-4212 For The 2022/2023 Filing Cycle; bid Guarantee In Accordance With Far Clause 52.228-1, Bid Guarantee; And responsibility Determination Information (see Below). responsibility Determination Information - In Order To Be Eligible For Award, The Bidder Must Be Determined Responsible In Accordance With Far Part 9, Specifically 9.104-1, General Standards. The Bidder Shall Provide The Following Information In The Bid Package, Which Will Not Be Provided To The Public For Inspection: identification Of The Contractor’s Personnel And Management To Be Used On This Contract. the Contractor’s Technical And Management Plans, Including A Schedule For Performing Required Services. description Of Contractor’s Facilities And Equipment. summary Of The Contractor’s Experience In Performing Work Of The Type Required By This Specification. one (1) Signed Bank Reference Demonstrating Adequate Financial Resources. If Offeror’s Firm Has A Line Of Credit – Provide Information On How Many Figures Offeror Can Borrow Against The Line Of Credit (i.e. Medium 6 Figures – Exact Line Of Credit Is Not Required). the Latest Three Complete Fiscal Year Financial Statements For The Prime Contractor, Certified By An Independent Accounting Firm, If Practicable, Or Signed By An Authorized Officer Of The Organization. Submit Evidence Of Availability Of Working/operating Capital, Which Will Be Used For The Performance Of The Resultant Contract. For Joint Venture Arrangements, Submit The Latest Three Complete Fiscal Year Financial Statements For Each Company In The Joint Venture And Discuss The Financial Responsibilities Among The Companies. The Government May Also Utilize Dun & Bradstreet Reports To Evaluate The Financial Capacity Of The Offeror. other Work Presently Under Contract And Their Period Of Performance. prior Contracts For Similar Work Of Similar Magnitude, And The Names, Addresses And Telephone Numbers Of Individuals With The Organization Issuing The Contract Who May Be Contacted For Information Concerning The Contractor’s Performance. although Required To Be Submitted With The Bid Package, This Information Will Not Be Evaluated As Part Of The Sealed Bid Evaluation. This Information Forms The Basis Of Your Firm’s Responsibility Determination Should Your Firm Be The Apparent Low Bidder. Packages Will Not Be Returned, But Shall Be Destroyed By The Contracting Officer. No Certificate Of Destruction Will Be Issued. the Offeror’s Bid Must Include All Data And Information Required And Must Be Submitted In Accordance With These Instructions. The Offeror Shall Be Compliant With The Requirements As Stated Herein, For Non-conformance May Result In Rejection Of Individual Bids. electronic Submission Via Piee offerors Shall Submit An Electronic Bid (.pdf Format) In Response To This Solicitation. Only The Piee Solicitation Module Is Authorized For The Submission Of Electronic Proposals In Response To This Solicitation. Electronic Proposal Submissions Should Be No Larger Than 1.9 Gb Per File. Offerors Shall Ensure That The Government Has Received The Electronic Proposal Prior To The Date And Time Specified. Piee Solicitation Vendor Access Instructions Are Provided Via Attachment 3. Emailed Submissions Will Not Be Accepted. Submissions Must Be Correctly Linked To The Subject Solicitation Number Within The Piee Module. Submissions That Are Incorrectly Linked May Not Be Considered. Upon Successful Submission Of Bid Through Piee, The Offeror Should Receive An Email Confirmation. Please Keep This For Your Records. offerors Shall Allow Adequate Time To Upload Files Which May Be Slower For Non-dod Users And To Avoid Other Technical Difficulties That May Be Encountered. Offerors Are Also Responsible For Submitting Files In The Format Specified And Consistent With Requirements Stated Elsewhere In This Solicitation. Files That Cannot Be Opened, Or Are Otherwise Missing The Required Content Are The Responsibility Of The Offeror. It Is The Sole Responsibility Of The Offeror To Obtain The Ifb Files, Along With Any Amendments, From Opportunities (https://piee.eb.mil And Https://www.sam.gov). piee System Will Record The Date And Time Of Package Submittal. The Date And Time Of Package Submittal Recorded In Piee Shall Govern The Timeliness Of Any Bid Submission. Late Bids Will Not Be Considered. bids Submitted In Response To This Request Must Be Received No Later Than The Date And Time Specified In Block 13a Of The Sf1442. Bids Not Received By The Time And Date Specified Shall Be Treated In Accordance With Far 52.214-7 “late Submissions, Modifications, And Withdrawals Of Bids”. contractor Evaluation Performance Reporting (cpar) contractor’s Performance Will Be Evaluated Using The Respective Contractor Performance Evaluation Report Entry System Located On The Website Http://www.cpars.gov. Prior To Commencement Of Work The Contractor Is Required To Provide The Government With The Name, Phone Number And E-mail Address Of The “contractor’s Representative” That Will Be Responsible For Receipt And Review Of Draft Performance Evaluations Prepared By The Government In The Appropriate System. It Is The Contractor’s Responsibility To Keep This Contact Information Current. utilities For Construction And Testing: The Contractor Shall Be Responsible For Obtaining, Either From Available Government Sources Or Local Utility Companies, All Utilities Required For Construction And Testing. The Contractor Shall Provide These Utilities At Their Expense, Paid For At The Current Utility Rate Delivered To The Job Site. The Contractor Shall Provide And Maintain All Temporary Utility Connections And Distribution Lines, And All Meters Required To Measure The Amount Of Each Utility Used. whole Dollar Pricing: Bids Will Be Rounded Down To The Nearest Whole Dollar For Evaluation And Subsequent Award Purposes. If After Rounding Takes Place There Are Multiple Identical Low Bidders, Far 14.408-6 Shall Apply. payment Instructions: Refer To Section 00 73 00 Of The Solicitation For Payment Instructions. bonding Requirements: A Bid Guarantee Is Required; Payment And Performance Bonds Are Required; The Contractor Will Submit Performance And Payment Bonds For Each Task Order Awarded Over $150,000.00. the Contractor Shall Submit Alternate Payment Protection For Task Orders Awarded From $35,000.00 - $150,000.00 In Accordance With Far 52.228-13, Alternate Payment Protection. for Task Orders Under $35,000.00, No Bonding Is Required. bidders Should Account For This Cost In Their Unit Prices. 3.3 Pre-bid Inquiries (ppis): All Inquiries Must Be Submitted In Writing And Received By The Contract Specialist Fourteen (14) Calendar Days Prior To The Solicitation Closing Date In Order To Permit Adequate Time To Reply To The Inquiry. There Is No Guarantee That Ppi’s Submitted After The Cut-off Date Will Be Answered Before The Solicitation Closes. submit All Inquiries To Erik Cole At Erik.w.cole2.civ@us.navy.mil. Use Of “attachment 4 Pre-proposal Inquiry Form” Template Is Required. The Ppi Form Template (attachment 2) Can Be Found On Https://piee.eb.mil And Https://www.sam.gov. Please Include The Solicitation Number And Title In The Subject Line Of The Email When Submitting Ppis. *****see Piee Notice*****

Details: Description Republic Of The Philippines Department Of Public Works And Highways Marinduque District Engineering Office Boac, Marinduque, Mimaropa (region Iv-b) Invitation To Bid For Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Sabong, Boac, Marinduque 1. The Dpwh-marinduque District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of Php 13,854,800.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ea0054 - Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Sabong, Boac, Marinduque. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-marinduque District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Sabong, Boac, Marinduque Contract Id No. : 25ea0054 Locations : Boac, Marinduque Scope Of Works : Construction Of 10 Columns And Footings; Tie Beams; Roof Beams; Roof Frame And Roofing; Stainless Steel Gutter With Roof Drains; 25m X 30m Flooring; Ramp; Stair; Concrete Platform; Concrete Moulding; Stage; Complete Set Of Doors And Windows; Plastering; Septic Tank; Earthworks; Steel Works; Ceiling Works; Stainless Steel Railings; Tile Works; Painting Works; Plumbing Works; And Electrical Works. Including Zoning Fee/locational Clearance; Filing Fee; Occupancy Permit; Professional Fee; And Electrical Fee. Approved Budget For The Contract : Php 13,854,800.00 Contract Duration : 210 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidders Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of At Least C&d For Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From Theprs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 5. Interested Bidders May Obtain Further Information From The Dpwh-marinduque District Engineering Office And Inspect The Bidding Documents At Dpwh Marinduque Deo, Boac, Marinduque During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 07-28, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh-marinduque District Engineering Office Will Hold A Pre-bid Conference On January 15, 2025, 9:00 A.m. At The Dpwh Marinduque Deo, Boac, Marinduque And Through Videoconferencing/webcasting Via Microsoft Teams, Which Shall Be Open To Prospective Bidders Via This Link Https://teams.microsoft.com/l/meetup-join/19%3ameeting_mdk0ywu2ztgty2i3ys00n2u5ltgxymitnzvjnja3mwe4y2fk%40thread.v2/0?context=%7b%22tid%22%3a%22b9e41a5f-4398-4578-89cf-6d3cdb824dcb%22%2c%22oid%22%3a%2267f51522-68c8-45e4-b629-a2cd72ac069a%22%7d. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 7. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_marinduque@dpwh.gov.ph For Electronic Submission On Or Before January 28, 2025, 10:00 Am. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 28, 2025, 10:00 Am, Immediately After The Deadline For The Submission Of Bid At Dpwh Marinduque Deo, Boac, Marinduque And Through Microsoft Teams With The Link Indicated In The Bds Itb Clause 17.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 13. The Dpwh-marinduque District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Fernan S. Diaz Chief, Planning And Design Section Bac Chairperson Boac, Marinduque (042) 332-0806 Diaz.fernan@dpwh.gov.ph Julito M. Maglacas Engineer Iii Head, Bac Secretariat Boac, Marinduque (042) 332-1086 0915-738-6644 Maglacas.julito@dpwh.gov.ph Approved By: Fernan S. Diaz Bac Chairperson Date: January 07, 2025