Oxygen Tenders

Details: Description Republic Of The Philippines Province Of Bohol Municipality Of Batuan Abstract Of Bid/bill Of Quantities ____________________________ ____________________________ ____________________________ Sealed Proposals,plainly Marked''proposals For Supplying To The Government''subject To The Terms And Conditions Set Forth Will Be Received On_______________ Of _________________ And Publicly Opened In The Presence Of The Members Of The Bids And Awards Committee Or Their Duly Authorized Representatives. Item Qty Unit Item Description Unit Cost Total Cost 1 Unit Professional Digital Console Microphone Mixer 20 Channels, 12 Stereo Microphone Inputs 4 Stereo Signal Audio Inputs, 2 Stereo Signal Outputs, 6 Sub/bus Out Signal, 1 Head Room Out, Digital Touch Screen Display For Easy Calibration, Individual Parametric Graphic Equalizers At 26 Equalizers, Hot Spot Operated At Google Play Remote Control/can Be Control On Any Android Gadgets, 5 Inch 7 Inch Touch Screen Display, All With Matrix Adjustmt Gate & Compressor Control, With Vocal Effects Processor, 3 Heavy Duty, Studio Master Digilive. 1 Unit Professional Digital Audio Processor Digital Speaker Management * Take Control Of Your Pa System With This State -of-the[1]art Loudspeaker Management System * Automatically Set Up Your Pa With Updated Wizard Functions *take Control Of The Drive Rack Pa2 With Your Favorite Mobile Device Or Laptop *enhanced Advanced Feedback Suppression And Autoeq Functions *includes Dbx's Legendary Compression *works With Android, Ios, Mac, And Windows Devices *built-in Crossover, Limiting, And Driver Alignment Delays 4 Units Professional Passive Sound Reinforced Speaker System, Dual 15 Inch With 4 Inch Compression Driver Unit, By Amp Design, 2500 Watts Each (rms), Plybeirge Box Enclosure, Long Thru Voice Quality At 110 Degrees Voice Caption Dipression, Heavy Duty Series 9 Units Professional Sound Reinforced Self Powered (powered) Speaker System With Compression Driver Unit, 12 Inch Speaker Driver With Compression Driver Unit, 500-800 Watts (rms) Self- Powered, Digital Back Control Display, With Tone Control And Gain Control 4 Units Professional Sound Reinforced Sublow Passive Speaker, Customed Made Speaker Enclosure At Textured Finished, W-box Jbl Design Customed With Unit Of 1,600w Rms- Original P. Audio 18 Inch Speaker Inclusion Heavy Duty, All Weather Passive 2 Units Professional Stereo Power Amplifier For Sublow Speaker Use, Toroidal Power Supply At 2000-4000 Watts (rms) Per Channelx 2, Powerful Power Transitor Type, Heavy Duty 2 Units Professional Stereo Power Amplifier For Mid Low- Mid Hi-use, Toroidal Power Supply At 1800-3000 Watts (rms) Per Channelx2, Powerful Power Transitor Type, Heavy Duty, 1 Unit Professional Professional Stereo Power Amplifier For Hi Mid Hi-use, Toroidal Power Supply At 800-2000 Watts (rms) Per Channelx 2, Powerful Power Transitor Type, Heavy Duty 1 Set Professional Wireless, Handheld Microphone System, 2 Handheld Mic In One Set At Uhf Frequency Battery Operated, Plus Ufh Main Receiver In One Set Ufh Frequency, 220v, 100 Meters Caption, 1 Unit Professional Automatic Voltage Regulator, With Time Delay, Servo Motor Type, With Volt Meter And Amphe- Re Meter, Dual Toroidal Power Supply, Prevents Fluctuation Of Electricity From Low Voltage To Hi Voltage To Electrical Normalization, 20,000 Watts-(20kva) Heavy Duty 1 Lot Hardware, Bolt, Screws, And Other Electrical Ancilaries For Electronic And Electrical Connectivity That Includes Bracketing For The Bleacher Speaker System, Its Safety Cabling And Audio And Electrical Terminal 1 Set Professional Snake Box Customized From Operator S Booth To Signal To User 16 I 4 Returns 4 Rolls Professional Stereo Signal Cable, 99.99 Percent Copper Pure, 400 Ohms, Copper Pure, Heavy Duty, 4 Rolls Professional 16-2 Cable Enclosure In One Insulation With Ground, Royal Cord 16-2, 99.99 Percent Copper, Oxygen Free, Use As Speaker Cable/ Supply Cable: 40 Pairs Professional Xlr Male And Female Connectors, 1 Lot Professional Systems Installation Fee That Includes A) Bracketing B) Mounting Of Equipments C) Programming D) Calibration E) Termination F) Orientation To End User G) Orientation To Basic Maintenance Of The Said Supply Note: Along With This Package Is A Free 1 Set Of Stage Search/spotlight Red-green-blue-white Spot Colors 1 Set Supply And Professional Installation Of Led Wall With Protective Roll Up Covers, Its Framing Programming, Accessories And Electrical Supply Inclusions Per Set: 1 Set 60 Panels Of Led Wall At 50cmx50cm Per Set-- At P3.9 Projection Contrast Rate, Fine Quality, Ip66-67 All Weather Outdoor Led Wall Sytem, Water And Heat Proof, Programmable, Ultra High Definition, All Colors Available Real And Bright Image Projection, Can Form To Landscape Or Portrait Set Up Approximate Measurement When Assembled Per 40 Panels Of 50cm X 50cm= 8.65 Ft X 11.80 Ft 1 Unit- Led Wall Driver/ Controller, Heavy Duty 1 Unit: 30kva/30,000 Watts Automatic Voltage Regulator, Toroidal Power Supply With Voilt Meter And Ampere Meter Equipt With Time Delay And Servo Motor Type, Adopts Electricity Fluctuation Both Low And High Voltage, Heavy Duty 1set Metal Frame For Fixed Installation On The Stage 1 Set Protective Roll Ups, Stainless Steel Metal With Vertical Metal Support, Horizontal Roll Up Blades As Protective Cover, Heavy Duty, Customed Made 1 Unit Professional Computer Set With 24 Inch Computer Set Monitor, Computer Specs: *amd Ryzen 7 5700x 3.4ghz (4.6ghz Max Boost) Cpu Processor I 1tb Nvme Ssd Up To 30x Faster Than Traditional Hdd I 240mm Aio *nvidia Geforce Rtx 3060 12gb Gddr6 Graphics Card (brand May Vary) I 16gb Ddr4 Ram 3200 Gaming Memory With Heat Spreader I Windows 11 Home 64-bit *802.11 Ac I No Bloatware I Graphic Output Options Include 1x Display Port Guaranteed, Addiotional Ports May Vary I Usb Ports Including 2.0, 3.0, And 3.2 Gen 1 Ports I Hd Audio And Mic I Free Gaming Keyboard And Mouse *4 X Rgb Ring Fans For Maximum Air Flow, 11th Gen 1 Set Electrical Cables Its Safety Earth Groundings, Panels And Switches 1 Lot Professional Systems Installation That Includes Mounting Of Led Walls, Bracketing, Program Ming, Termination, Calibration And Orientation To End User 1 Unit Professional Stage And Entertainment Lighting And Effects Control With Bright Screen, Increased Processing Power, And Faster Graphics Engine, The Tiger Touch Ll Is The Most Specified Titan Console. * Represents The Perfect Combination Of Power And Portability * Small And Light Enough To Fly In Standard Hold Luggage *smpte Time Code Support And A Button Layout To Match The Entire Titan Range Quicksketch Labelling For Ultimate Personalization Powerfull Multi-user Networking With Any Titan Console Create Huge Effects In Seconds With Key Frame Shapes Feature-packed Cue Lists Supporting Macros, Tracking, Autoloads, Timecode And More Expand Dmx Channel Capacity With Titan Net Processors Synergy-ready. Add Any Ai Product To Unlock Seamless Video Integration 10 Unit Professional Beam 295 Moving Head Lights With Touring Hard Case Good For 2 Moving Heads Equivalent To 5 Touring Hard Case For 10 Units Of Beam 295 Features: 14r 295w Beam Moving Head Light Lamp: Roccer 14r 295w Channel Mode: 18 Dmx512 Channel Amazing Dot Matrix, Four Tact Switch, 180◦ Turning Show Color Wheel: 14colors + White, And Seven Colors Effect Gobowheel: 14 Gobos (8fixed Gobos + 5 Glasses Gobos + White) Effect Wheel: 6 Independent Prisms, 8 Prism/ T Prism/ 6+12 Prism/16 Prism/t Prism/8+16+24 Prism, Can Combine 17 Kinds Of Prism Effects 32 Units Professional Par Led Light Stage Color Changer Lights, Red Green Blue White Color Combination Heavy Duty 3 Watter Equals 162 Watts Over All At 54 Bulb Or 18 Bulbs At 9 Watts Per Bulb 2 Units Professional Crank Case Type Tripod Heavy Duty Lighting Stand Controls Up And Down Of Installed Lights, Easy Movable In Different Angles, Load Up To 70 Lkgs, Can Accommodate 8 Units Of Par Led Lights 2 Units Professional Power Smoke Machine System With 2 Liters Unscented Smoke Fluid Free Each Machine 1,500 Watts 4 Rolls Number 16 Pure Copper Power Dupex Cable, Heavy Duty, Philippine Standard Strand 5 Rolls Professional Dmx Cable, Signal Microphone Cable 100-400 Ohms Impedance, Heavy Duty, Pure Copper 99.99 Percent Coper, 2 Shielded Plus One Ground Wire In One Consolidated Cable, 4 Units Professional Dmx Lightings Signal Splitter, Heavy Duty At 8 Splits 1 Units Professional Automatic Voltage Regulator 30 Kva (30,000 Watts) With Ampere Meter And Volt Meter, Equip With Time Delay, Servo Motor Type, Toridal Power Supply, Dual Power Supply Winding At Pure Copper At Power Supply In One Cabinet, Enclose In One Stainless Steel Metal Cabinet, With Locking System And Caster Wheel For Mobility Protects All Lighting Equipments From Power Interruption That May Cause Power Fluctuation Form Low Voltage And Hi Voltage To Normalization Or Voltage Normalization 1 Lot Electronics Connector For All Electronic Connectivity 1 Lot Electrical Connectors, Panels, Outlets And Plugs 1 Lot Professional Systems Installation That Includes: A) Bracketing B) Mounting Of Equiptments C) Programming D) Calibration E) Termination F) Orientation To End User G) Orientation To Personnel To Operate On Basic Programming And Maintenance Of The Said Supply Total Total Bid/quotation Should Not To Exceed The Approved Abc Name Of Project: Purchase Of Supply Of Audio And Lighting Equipment With Systems Programming And Led Wall For Batuan Gymnasium Place Of Delivery:pob. Sur , Batuan, Bohol Time Of Delivery:__________________ Date Of Delivery:___________________ Bid Security Surety (5%) Cash Guarantee (2%) I Hereby Certify That The Above Articles Are Actually Carried In Stock By Me. The Terms And Conditions Specified Above Are Hereby. _______________________________ Name & Signature Of Bidder Eliseo B. Sumampong Bac Chairman

Details: Description Republic Of The Philippines Province Of Leyte Municipality Of Palo Invitation To Bid For Supply/delivery Of Diving Gear With Compressor Unit For The Bantay Dagat Of The Municipality Of Palo, Leyte Purchase Request No. 25-02-082 1. The Municipality Of Palo, Through The Calamity Fund Approved By The Sangguniang Bayan Intends To Apply The Sum Of Three Million Nine Hundred Four Thousand Thirty Five Pesos (p3,904,035.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply/delivery Of Diving Gear With Compressor Unit For The Bantay Dagat Of The Municipality Of Palo, Leyte With Pr No. 25-02-082. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Palo Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Sixty (60) Calendar Days. Bidders Should Have Completed, Within Ten (10) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Description Of Goods Item No. Item & Description Unit Qty. 1 Diving Gear Inclusions: Bouyancy Control Device (bcd) Jacket Uv Protected 1000 Denier Cordura® Height Adjustable Shoulder Buckles Specially Designed Octopus And Pressure Gauge Pockets Backpack With Handle To Carry Easily Adjustable Cummerbund High Buoyancy Lift Color & Size Identification Weight 4.2kg /9.2lb (size L) Available Size: Xxs, Xs, S, M, L, Xl, Xxl Regulator Lightweight And Reliability Weight (w/hose): 35.45 Oz. (1,107 G) Nitrox Ready Up To 40% Oxygen Out-of-the-box First Stage: Balanced Diaphragm Dfc System Sandblasted Chromed Marine Grade Brass Inherently Environmentally Sealed Design Design Provides Protection From Sand, Salt, Chlorine, Pool Acid & Contaminants Pre-oriented Pressure Ports A.c.t. Advanced Coating Tri-material Valve Technology 4 Lp Port And 2 Hp Ports 2 Hp Ports Second Stage: Primary And Octopus Soft Purge Diaphragm With Mesh- Grid Downstream Demand Valve Mid-size Stylish Second Stage Vortex Assisted Design (v.a.d.) System Fluid Dynamic Deflector Console Pressure Gauge: Compact Lightweight Ergonomic Design Dimensions: 5.2" X 2.8" X 0.9" (132 X 70 X 23 Mm) Weight: 9.88 Oz. (280 G) Durable Brass Case W/techno Polymer Lens Color Coded For Safe Air Reserve Readout: 0 To 360 Bar 50 Bar Color Coded In Red 200 To Full Scale Color Coded Blue Depth Gauges: 0' To 230' Read Out Safety/deco Stop 0' To 30' Indicator For Safety Max-depth Indicator Needle (mdin) Wetsuit 3mm Fullsuit All Black Wetsuit With Grey Side Panel Ykk Plastic Zippers Which Are Superior To Metal No Derailing No Corrosion Back Zipper With Nylon Webbing For Easy Zipping Collar With Adjustable Velcro Neck Construction Provide Better Comfort Flatlock Stitched Construction With Contrastive Color Sewing Equip With Printing Knee Pad Protection Suitable For Diving Sports & All Water Sports Available Sizes: Xxxs, Xxs, Xs, S, M, L, Xl, Xxl Mask Tempered Glass Dual Heavy Duty Construction Integrated Buckles System On Frame, Easy To Use Even With Gloves Extremely Comfortable Silicone Skirt Available In Yellow And Blue Frame Snorkel Curved, Ergonomic Design For Extended Use Integrated Snorkel Holder Soft Siliter Mouthpiece Drain Valve For Immediate Cleaning Booties Ankle Booties High Cut Lightweight, Ideal For Travelling Non-slip Sole 5mm Neoprene Fins Abs Plus Buckles Which Can Be Adjusted With One Hand 3 Channels For Maximum Thrust Stabilizers A Mid-sized Blade Which Is Made To Last Color Available: Black, Yellow And Blue Gloves Neoprene Lining On Both Sides Rubber Pattern On The Palm For Extra Grip 2 Mm Neoprene With A Layer Of Rubber On The Palm To Ensure Maximum Grip And Protection From Abrasions Diving Gloves Offer Thermal Protection With Maximum Comfort Of Movement Bag Extremely Lightweight External Zip Pocket Reinforced Bottom Long Wide Straps Dimensions (lxwxh): 69 X 26 X 29cm / 27 X 10 X 11in Unit Net Weight: 0.7kg / 1.5lb Volume: 50l / 3057in³ Belt (55 Pcs Per Set) Webbing Nylon For Weights Buckle Stainless Steel Buckle Weights (5 Pcs Per Set) Weight 2lbs Made Of High-quality Lead Keeper (5 Pcs Per Set) Black Plastic Weight Retainer Is Often Referred To As A 'triglider' Made Of Plastic, The Weight Retainer Is Light And It Also Features A Serrated Keeper To Keep Itself In Place Tank (2 Pcs Per Set) 11.1 Liter / 80cf Tank 3000 Psi Pressure Thread Size: 3/4-14 Npsm 6061-t6 Aluminum Brushed Finish Cylinder Tank Valve Easily Converts From Yoke To Din Cylinder Is Nitrox Ready Up To 23.5% Made In Usa Tank Valve Ready For Din / Yoke Connection Rated To 240 Bar / 3,500 Psi Dive Float Oral Inflate Tube Oprv (over Pressure Release Valve) 2nd Stage Inflation Safety In Small Package Dimensions: 6" X 72" Reel Black Plastic Reel Line – White Color And 25 Meters Only With Brass Double End Bolt Knife Aisi 420 Stainless Steel Blade (11.8 Cm): Durable And Precise For Underwater Tasks. Total Length With Handle (23 Cm): Provides Versatility Without Compromising Portability. Curved Smooth Edge: Enables Easy Cutting In Various Underwater Scenarios. Serrated Edge And Line Cutter: Adds Versatility For Different Cutting Needs. Non-slip Handle With Overmolding: Enhances Grip For Secure Handling Underwater. Easy Release System: Ensures Quick And Efficient Access To The Knife. Rigid Sheath With Straps: Safely Carry The Knife Attached To The Calf Or Thigh For Easy Access. Lights Led Chip: 1* Luminous Sst40 Brightness: High: 2000 Lumens, Mid: 1000 Lumens & Low: 300 Lumens Light Mode: High/mid/low/strobe/signal Mode Run Time: 3h/4h/15h/5h/200h Lux: High ≥20000lux Charging Time: 4h Beam Angle: 11° Beam Distance: High ≥ 290m Light System: Reflector Light Effect: Spotlight Battery: 1*built-in 21700 Battery 5000mah Housing Material: Pc + Aluminum Waterproof: Ipx8 Underwater 100m Impact Resistance: 1.5m Net Weight: 196g (with Battery) Compass Double Read Out, Side Or Top Max Operative Trim: 20 Degrees Dial Plate: 40 Mm High Resistance Techno Polymer, Polycarbonate Computer Entry Level Solution 3-line Layout Ean (nitrox) From 21% To 99% Rgbm Algorithm Glass: Mineral Glass Display: Segment Display Max Displayed Depth: 150 M (492ft) Battery: Cr2450 Fresh And Seawater Settings: Yes Residual Nitrogen Reset: Yes Upgradeable Software: Yes Compressor Specifications: Liters/ Minute: 280 Filling Tanks Per Day: 30 To 50 Tanks (80cf) Maximum Service Pressure: Final Safety Valve Service Pressure 232 Bar / 3,364 Psi Available Source Of Power: 9hp Gasoline Or 5hp 1ph High Speed 220v 60hz Electric Motor Filling Hoses: 2 Filtration: Maxi Filter Condensate Drain: 2 Separators With Manual Drain Lubrication: Splash Lubrication Dimension (lxwxh): 100 X 70 X 46 Cm Sets 5 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Municipality Of Palo Thru The Bids And Awards Committee And Inspect The Bidding Documents At The Address Given Below During Regular Working Days From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Tuesday, February 25, 2025 From The Given Address Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (5,000.00). The Procuring Entity Shall Allow The Bidder Or His/her Authorized Representative To Present His/her Proof Of Payment For The Fees In Person. 6. The Municipality Of Palo Will Hold A Pre-bid Conference On Wednesday, March 5, 2025 At 10:00 O’clock In The Morning At Ground Floor, Municipal Annex Building, San Roque St. Corner Acebedo Ave., Brgy. Buri, Palo, Leyte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 10:00 O’clock In The Morning Of Monday, March 17, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On Monday, March 17, 2025 At 10:00 O’clock In The Morning At San Roque St. Corner Acebedo Ave., Brgy. Buri, Palo, Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Palo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jadd Meyrick S. Agner Municipal Engineer Municipal Annex Building, San Roque St. Cor. Acebedo Ave., Brgy. Buri, Palo, Leyte Email Address: Jaddagner@gmail.com Telephone No. 63-053-83255666 February 25, 2025 (sgd) Engr. Jadd Meyrick S. Agner Bac Chairman

Details: Description Rfq No.: 2025-03-037 Date: March 20, 2025 Pr No.: 2025-03-052 To All Eligible Suppliers Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms And Conditions Of This Rfq, For More Information Please Call 09694179074 Or Email Baaowdbac@gmail.com. Open Quotation Duly Signed By Your Representative May Be Submitted By Mail To Baao Water District, La Medalla, Baao, Camarines Sur Or Email At Baaowdbac@gmail.com. Not Later Than 9:00 A.m Of March 25, 2025. Sgd.mishelle P. Abundabar Bac Secretariat Pr 2025-03-052 Procurement Of Machinery And Equipment Used For Installation Of New Service Connection And Repair And Maintenance 1 Lot Please See Page 2 For Items Descriptions Abc Php 551,250.92 Terms Of Payment: Within Thirty (30) Calendar Days From Date Of Delivery Of Goods Please Sign All Pages Unit Item Description Quantity Set Welding And Cutting Outfit 1 Specifications: • Complete Set, Heavy Duty, Gas Welding, Cutting, Brazing & Heating Torches, Made In Europe • Cutting Capacity : 6 In (150mm) • Welding Capacity : 1 In (25mm) What's In Box: • 263 Welding Torch With Check Valves • Welding Tips - Sizes: 1,3,5 • Model: 73-3 Cutting Attachment • Series 6290 Cutting Tip Size 2 Ac • E-43 Mixer • 25 Gx-10 Oxygen Regulator • 25 Gx-1,5 Acetylene Regulator • Aps010 Goggles • 26-s/l Lighter With Flints • 20 Ft 1/4" Twin Hose, Complete With Fittings • 1013 Wrench And Instruction Booklet Set 2 In 1 300a Inverter Welding Machine With Accessories 1 Specifications Tig/arc Inverter Welding Machine 300a Mt300a With Argon Regulator Model Mt-300a Tig And Arc 2in1 Amperes : 300amp Power Voltage : 1 Phase Ac 220v Frequency: 50/60 Hz Duty Cycle (%) : 80 Includes: (complete Accessories) • Argon Regulator, Welding Mask, Dark Glass, Chipping Hammer With Wire Brush, Welding Holder With Cable, Ground Clamp With Cable, Tig Torch With Standard Accessories Set Gasoline Engine 7.5hp 2 Specifications Max. Output: 7.8hp Camshaft Diameter: 19.05mm, Q Type Max. Torque: 24.5nm Engine Type: 4 Stroke, Ohv Displacement: 196cc Rotation Speed: 1800rpm Bore*stroke: 68x54mm Cooling System: Air-cooled, Ignition System: T.c.i, Starting System: Recoil Fuel Tank: 3.6l, Oil Capacity: 0.6l, Oil Alert Function Pcs Heavy Duty Straight Pipe Wrench 18" 2 Features • Have A Sturdy, Ductile-iron Housing And An I-beam Handle With A Full Floating Forged Hook Jaw, Featuring Self-cleaning Threads With Replaceable Hook And Heel Jaws. Specifications Nom. Size: 18” Pipe Capacity: 2 ½” Weight: 5 ½ Lbs. Or 2.6kg Dimensions Width=8.5, Height=2.8 And Length=40.8 Pcs Heavy Duty Straight Pipe Wrench 12" 2 Features • Have A Sturdy, Ductile-iron Housing And An I-beam Handle With A Full Floating Forged Hook Jaw, Featuring Self-cleaning Threads With Replaceable Hook And Heel Jaws. Specifications Nom. Size: 12” Pipe Capacity: 2” Weight: 2 ¾ Lbs. Or 1.2kg Dimensions Width=7.3, Height=3 And Length=28.8 Pcs Heavy Duty Straight Pipe Wrench 10" 2 Features •have A Sturdy, Ductile-iron Housing And An I-beam Handle With A Full Floating Forged Hook Jaw, Featuring Self-cleaning Threads With Replaceable Hook And Heel Jaws. Specifications Nom. Size: 10” Pipe Capacity: 1 ½” Weight: 1 ¾ Lbs. Or 0.8kg Dimensions Width=6.5, Height=2.6 And Length=24.5 Pcs Heavy Duty Combination Plier (200mm) 2 Features • Industrial Grade, Forged Steel And With Tpr Insulation Handles Specifications • Heavy Duty • 200mm Pcs Heavy Duty Diagonal Cutting Plier (200mm) 2 Features: • Tested Up To 10,000 Volts And Vde-certified Up To 1,000 Volts According To Din En/iec 60900. Convenient To Handle, Grasp, And Cut Well. Durable And Robust Pliers Head Made Of Chrome Vanadium Steel Specifications: Rust Resistant, One-hand Usage, Anti-slip Shoulders, Hardened Cutting Edges, High Leverage Design, Vde, Ergonomic Grip Handle, Soft Grip : ✔ Pliers Type: High Leverage Diagonal Side Cutter Weight: 0.317 Kg Material: Chrome Vanadium Maximum Voltage: 1,000 V Tensile Strength Ordinary Steel Wire: 1,600 N/mm² Sets Cushion Grip 4pcs Screw Driver Set 2 Specifications Magnetic Tip, Cushion Grip Handle For Comfort, Better Efficiency And Handling Size: Ph1 - Dmm:5mm, Blade:104mm, Handle:100mm, Ph2 - Dmm:6mm, Blade:114mm, Handle:150mm, Sl5 Dmm:5mm, Blade:104mm, Handle:100mm And Sl6 Dmm:6mm, Blade:114mm, Handle: 150mm Material: Cr-v Bar Improved Ergonomic Design For Maximum Grip And Torque Pcs Pipe Thread Set (1/2" - 1") Without Carrying Case 3 Features: • Manual Pipe Threading Kit (ideal For 1/2" To 1" Steel Pipe) Specifications •12.70 Mm ( 1/2" ) – 25.4 Mm ( 1” ) Includes : • Sizes : 1/2", 3/4", 1" • Ratchet Handle Sets 1/2 Socket Torque Ratchet Wrench Set (with Combination Wrench 8" - 22") 5 Specifications 42pcs Tk42 4400m - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm 1161m - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24 Mm 4100gq - 1/2" Dr. Quick Release Ratchet Handle 4800-5,10 - 1/2" Dr. Extension Bar (5,10") 4777 - 1/2" Dr. L Handle 4200 - 1/2" Dr Universal Joint 4770-12 - 1/2" Dr Sliding T-handle 12" 1/2 Drive Metal Disc. Pcs Portable Diesel Generator 2 Features Super Silent Diesel Generator 9.5kva With Battery For Electric Start Emergency Backup Power Quiet Generator Specifications Rated Power : 5500w Prime/surge Power: 9.5kva Engine Speed: 3600rpm Rated Voltage: 220v Rated Frequency: 60hz Noise Level: 72-77 Excitation Mode: 100% Copper Displacement Raion (cos): 480 Power Factor: 1 Phase: Single Phase Starting System: Electric Start Engine Type: Diesel Engine, 4-strokes, Air Cooled, Direct, Injection Max Output Power: 18hp Rotation Direction: Clockwise Measurement: 990x565x770mm **nothing Follows** Total Terms And Conditions A. Submission Of Requirements Open Quotations And Other Requirements Stated Below Shall Be Submitted To Baao Water District, La Medalla, Baao, Camarines Sur Not Later Than 9:00 A.m Of March 25, 2025. 1. Supplier Shall Fill-in All The Necessary Information. 2. Supplier Should Indicate The Brand Name Of The Product Being Offered. (if Applicable) 3. Supplier Shall Submit The Following Documentary Requirements: A. This Request For Quotation Form Duly Signed. Prices Shall Be Quoted In Philippine Peso. B. Philgeps Certificate/registration Number C. Mayor’s Permit/ Business Permit D. Bir Tax Registration Certificate (for Abcs Below 50k)/bir Income/business Tax Return (for Abcs Above 500k E. Brochure For Technical Specifications Of The Product Being Offer. (for Items That Needs Technical Specifications) F. Duly Notarized Omnibus Sworn Statement (for Abcs Above 50k) B. Evaluation Of Quotations Quotations Shall Be Compared And Evaluated On The Basis Of The Following Criteria: 1. Completeness Of Submission 2. Compliance With Technical Specifications 3. Price 4. Bwd Reserves The Right To Post-qualify Any Supplier And/or To Reject Any Or All Submitted Quotations C. Award The Supplier Who Submitted The Lowest Calculated Responsive Quotation Shall Be Awarded The Purchase Order After Evaluation. D. Delivery And Installation 1. Delivery Of Services Shall Be Made Within Thirty (30) Calendar Days During Office Hours 9:00 Am- 4:00 Pm From Date Of Receipt Of Purchase Order. 2. Deliverables Shall Be Delivered To Baao Water District, La Medalla, Baao, Camarines Sur, Hereto Defined As Project Site, Costs To The Account Of Supplier. E. Instructions 1. Supplier Shall Be Responsible For The Source Of Its Goods/equipment, And Shall Make The Deliveries In Accordance With The Schedule, And Specifications Of The Award Or Purchase Order. Failure Of The Supplier To Comply With This Provision Shall Be Ground For Cancellation Of The Award Or Purchase Order Issued To The Supplier. 2. Supplier Who Accepted A Purchase Order But Failed To Deliver The Required Goods Within The Time Called For In The Purchase Order Shall Be Disqualified From Participating In Bwd Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under R.a. 9184 And It’s Irr-a Against The Supplier. 3. Rejected Deliveries Shall Be Construed As Non-delivery, And Shall Be Replaced By The Supplier Subject To Liquidated Damages For Delayed Deliveries. 4. All Duties, Excise, And Other Taxes, And Revenue Charges Shall Be Paid By The Supplier. 5. All Transactions Are Subject To Withholding Of Credible Value Added Tax And/or Expanded Value Added Tax Per Revenue Regulation(s) Of The Bureau Of Internal Revenue. 6. Tie-breaking Method In The Form Of “draw Lots” Will Use In Case Of Two Or More Suppliers Submitted/offer An Equal Or Same Bid Amount. F. Packaging The Supplier Shall Provide Such Packing Of The Goods Appropriate To Prevent Their Damage Or Deterioration During Transit To The Project Site. G. Inspection 1. All Deliveries By Suppliers Shall Be Subject To Inspection, And Acceptance By The Bwd Inspection Team And The End-user. H. Liquidated Damages A Penalty Of One-tenth Of One Percent (0.001) Of The Total Value Of The Undelivered Goods Shall Be Charged As Liquidated Damages For Every Day Of Delay Of The Delivery Of The Purchased Goods. I. Warranty Warranty Shall Be A Period Of Six (6) Months For Supplies And Materials, And One (1) Year In Case Of Equipment Reckoned From Date Of Acceptance Of The Goods At Project Site. J. Payment Contract Price Shall Be Paid To The Supplier Within Thirty (30) Calendar Days From Date Of Delivery Of Goods At Project Site. All Payments Shall Be For Pick-up By The Supplier At The Bwd Office, Provided However, That If The Supplier Opts To Have The Said Payments Deposited To Its Bank Account, An Original Copy Of The Authority To Deposit Signed By The Authorized Signatory, Including An Instruction That Any Bank Charges Shall Be Automatically Deducted From Its Bank Account Must Be Provided To The Bwd. The Winning Supplier Shall Shoulder The Bank Charges Incurred For Bank-to-bank Transaction In The Release Of Payments For The Goods.

Details: Description Request For Price Quotation __________________________________________ (name Of External Provider) __________________________________________ (address) Please Quote Your Lowest Price On The Item Listed Below, Subject To The General Conditions On The Latter Part Of This Stating The Shortest Time Of Delivery And Subject Your Quotation Duly Signed By Your Representative Not Later Than June 9, 2025 At 12:00 Nn In The Return Envelope Attached Herewith. Conditions: 1. All Entries Must Be Legibly Written 2. Price Validity Shall Be For A Period Of 30 Calendar Days. 3. Delivery Should Be Made On 30 Days After Issuance Of Purchase Order. 4. Payment Shall Be Made Through Government Check _____ Days After Delivery. 5. The Approved Budget For The Contract For This Procurement Is P 158,000.00 (6%) Vat Inclusive & Freight Inclusive. 6. Posting Of Performance Bond Upon Receipt Of Notice Of Award In Either Of The Following Amount. Cash (5%) Bank Guarantee (10%) Surety Bond (30%) 7. Guide To Vat Inclusion On Total Price Quoted: Vat Registered 6% For Goods Non-vat Registered 4%(goods) 7% For Services 5%(services) 8. The Bidder Must Not Be “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board; 9. The Bidder Must Not Be Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 10. The Bidder Must Indicate The Brand Name And Model If Applicable. Analyn A. Madrid, Met Bac Chairperson Item No. Description Of Articles Qty. Unit Of Measure Unit Price Total Price Project Name: Procurement Of Calibration Services – 1 Lot Dental Clinic 1 Calibration Services, Dry Heat 1 Piece 2 Calibration Services, Autoclave Sterilizer (table Type) 1 Piece 3 Calibration Services, Dental Chair With Accessories 1 Set Food Trades Laboratory 4 Calibration Services, Weighing Scales 26 Piece Mechanical Engineering Laboratory 5 Calibration Services, Electronic Scale 1 Piece 6 Calibration Services, Dead Weight Tester 1 Piece 7 Calibration Services, Pelton Wheel Turbine Test Rig 1 Piece 8 Calibration Services, Axial Fan Flow Demonstration Unit 1 Piece Electronics Engineering Laboratory (mechatronics) 9 Calibration Services, Laboratory Dc Power Supply 4 Piece 10 Calibration Services, Ac/dc Power Supply 4 Piece Civil Engineering Laboratory 11 Calibration Services, Oven 1 Piece 12 Calibration Services, Air Meter 7l Capacity/ Pressure Gauge Type 1 Piece 13 Calibration Services, High Precision Balance 3000x0.1 Ig Sensitivity 1 Piece 14 Calibration Services, Digital Balance 30kg Cap. X 1g 5 Piece 15 Calibration Services, Digital Caliper 2 Piece 16 Calibration Services, Vicat Apparatus 1 Piece 17 Calibration Services, Liquid Limit Device 3 Piece Electrical Engineering Laboratory 18 Calibration Services, Capacitive Load 1 Piece 19 Calibration Services, Resistive Load 1 Piece 20 Calibration Services, Transformer 1 Piece 21 Calibration Services, Data Acquisition And Control Interface 1 Piece 22 Calibration Services, Inductive And Capacitive Loads 1 Piece 23 Calibration Services, Power Supply 1 Piece 24 Calibration Services, Dc Motor/generator 1 Piece 25 Calibration Services, Inductive Load 1 Piece 26 Calibration Services, Synchronous Motor/ Generator 1 Piece 27 Calibration Services, Three Phase Transformer Bank 1 Piece 28 Calibration Services, Universal Motor 1 Piece 29 Calibration Services, Four Pole Squirrel Induction Motor 1 Piece 30 Calibration Services, Permanent Magnet Dc Motor 1 Piece 31 Calibration Services, Digital Oscillopse 2 Piece 32 Calibration Services, Digital Multimeter 2 Piece 33 Calibration Services, Four Quadrant Dynamometer/ Power Supply 1 Piece 34 Calibration Services, Power Supply 1 Piece Medical Clinic 35 Calibration Services, Weighing Scales 3 Piece 36 Calibration Services, Pulse Oximeter 2 Piece 37 Calibration Services, Autoclave Sterilizer (table Type) 1 Piece 38 Calibration Services, Opthalmoscope 2 Piece 39 Calibration Services, Nebulizer 3 Piece 40 Calibration Services, Oxygen Regulator 2 Piece 41 Calibration Services, Bp Apparatus (aneroid) 3 Piece 42 Calibration Services, Digital Thermometer 2 Piece 43 Calibration Services, Bag Valve Mask 1 Piece 44 Calibration Services, Glucose Monitor Machine 1 Piece 45 Calibration Services, Intubate Set 1 Piece Microbiology Laboratory 46 Calibration Services, Incubator 2 Piece 47 Calibration Services, Drying And Heating Chamber 1 Piece 48 Calibration Services, Water Bath 1 Piece 49 Calibration Services, Autoclave Sterilizer (table Type) 1 Piece 50 Calibration Services, Weighing Scales 1 Piece 51 Calibration Services, Laboratory Refrigerator 1 Piece 52 Calibration Services, Vacuum Gauge 1 Piece 53 Calibration Services, Electric Stove With Built-in Oven 1 Piece 54 Calibration Services, Refractometer 1 Piece 55 Calibration Services, Digital Viscometer 1 Piece 56 Calibration Services, Turbidity Meter 1 Piece 57 Calibration Services, Ph Meter 1 Piece Physics And Chemistry Laboratory 58 Calibration Services, Weighing Scales 37 Piece 59 Calibration Services, Digital Multitester 10 Piece 60 Calibration Services, Ph Tester 1 Piece Gsu Office 61 Digital Multimeter 2 Piece (please See Attached Terms Of References) Grand Total: ___________ Delivery Period _________________________ Warranty _________________________ Price Validity _________________________ After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Price Above Indicated. ________________________________ *printed Name/signature ________________________________ *tel. No./cellphone No./e-mail Address ________________________________ *tin Number Documentary Requirements For Small Value Procurement: 1. Certificate Of Philgeps Registration/philgeps Reg. Number 2. Mayor’s/business Permit 3. Bir Certificate Of Registration 4. Dti/sec Certificate 5. Income/business Tax Return (for Abcs Above 500,000.00) *for Abcs Above 50,000.00 6. Original Copy Of Notarized Omnibus Sworn Statement Using The Gppb-prescribed Form/template Note: If Unable To Have The Document Notarized, You May Submit A Signed Unnotarized Omnibus Sworn Statement, Subject To Compliance Therewith After Award Of Contract But Before Payment Terms Of Reference Name Of Procurement Project: Calibration Services Of School Laboratory Equipment Abc: 158,000.00 I. Background Accurate And Reliable Laboratory Equipment Is Essential For Effective Teaching And Learning In Science Education. In School Laboratories, Instruments Such As Balances, Thermometers, Ph Meters, Microscopes, And Volumetric Glassware Play A Critical Role In Facilitating Hands-on Experiments And Developing Students' Scientific Skills. However, Over Time, These Instruments Can Lose Their Accuracy Due To Regular Use, Environmental Conditions, Or Mechanical Wear. Calibration Services Ensure That Laboratory Equipment Maintains Its Precision And Complies With Educational And Safety Standards. Regular Calibration Not Only Enhances The Quality Of Scientific Instruction But Also Supports Fair Assessment Outcomes And Fosters A Culture Of Scientific Integrity. Implementing A Systematic Calibration Program Within School Laboratories Is Thus Vital To Maintaining The Accuracy, Safety, And Credibility Of Scientific Experiments. Ii. Objectives The Primary Objective Of Providing Calibration Services For School Laboratory Equipment Is To Ensure The Accuracy, Reliability, And Safety Of Scientific Instruments Used In Educational Settings. Specifically, The Objectives Are To: Maintain Measurement Accuracy: Ensure All Laboratory Instruments Provide Precise And Consistent Readings In Alignment With Recognized Standards. Enhance Educational Quality: Support Effective Science Teaching And Learning By Enabling Accurate Experimental Results. Promote Student Safety: Reduce Risks Associated With The Use Of Miscalibrated Or Faulty Equipment During Laboratory Activities. Extend Equipment Lifespan: Identify And Correct Instrument Deviations Early, Thereby Reducing Wear And Preventing Damage. Ensure Compliance: Meet National And Institutional Standards For Laboratory Practices And Quality Assurance In Education. Support Fair Assessment: Enable Consistent And Unbiased Evaluation Of Student Experiments And Outcomes. Iii. Scope Of Work This Project Covers The Provision Of Professional Calibration Services For Laboratory Equipment Used In School Science Laboratories. The Scope Includes All Necessary Activities To Ensure That Instruments Are Functioning Accurately, Safely, And In Accordance With Established Educational And Technical Standards. The Key Components Of The Scope Are As Follows: 1. Calibration Procedures: Perform Calibration Using Certified Reference Standards And Procedures Traceable To National Or International Standards (e.g., Iso/iec 17025). This Includes Adjusting Equipment As Needed To Restore Accuracy. 2. Documentation And Certification: Provide Detailed Calibration Reports And Certificates For Each Item, Indicating The Pre- And Post-calibration Status, Measurement Uncertainty, And Any Corrective Actions Taken. 3. Labeling And Tagging: Affix Calibration Labels On Each Calibrated Instrument With Relevant Details Such As Calibration Date, Due Date, And Unique Identification Number. 4. Repair And Recommendations: Identify Equipment That Is Damaged Or Beyond Calibration Limits And Provide Recommendations For Repair Or Replacement Where Necessary. 5. Training And Support: Offer Brief Orientation Or Training Sessions For Laboratory Staff On Proper Equipment Handling, Routine Checks, And Understanding Calibration Reports, If Required. 6. Follow-up Services: Provide A Schedule And Proposal For Routine Recalibration Services To Ensure Continued Equipment Accuracy Over Time. Iv. Training As Part Of The Calibration Services For School Laboratory Equipment, A Focused Training Component Will Be Provided To Ensure That Laboratory Personnel And Science Teachers Are Equipped With The Knowledge And Skills Necessary To Maintain The Accuracy And Longevity Of Calibrated Instruments. The Training Will Aim To: 1. Enhance Awareness: Educate Staff On The Importance Of Regular Calibration And Its Impact On Experimental Accuracy, Student Safety, And Compliance With Educational Standards. 2. Promote Proper Equipment Handling: Instruct Participants On Correct Usage, Storage, And Routine Care Of Sensitive Laboratory Instruments To Minimize Damage And Measurement Drift. 3. Interpret Calibration Reports: Train Staff To Understand Calibration Certificates, Interpret Results, And Recognize When Equipment May Require Re-calibration Or Servicing. 4. Conduct Basic Checks: Enable Staff To Perform Basic Pre-use Verifications And Identify Early Signs Of Equipment Malfunction Or Deviation. 5. Foster A Culture Of Quality Assurance: Encourage Good Laboratory Practices That Support Consistent, Safe, And High- Quality Science Education. Training Will Be Delivered Through On-site Workshops, Demonstrations, And Supporting Materials, Tailored To The Specific Equipment Used In The School's Laboratories. Follow-up Support Will Be Available As Needed To Reinforce Learning And Assist With Ongoing Quality Maintenance. V. Time Schedule And Reports: Month Of June Vi. Payment Terms And Conditions: After Calibration Services Have Been Done. Vii. Warranty Requirements, If Applicable Viii. After Sales Service/parts, If Applicable

Details: Description Supply And Delivery Of Various Laboratory Supplies 150 Pcs Test Tubes, 20 Ml, 16 X 150mm, Borosilicate Glass 37,500.00 10 Pcs Stirring Rod, 12" Long, 4mm Diameter, Borosilicate Glass With Fire Polished Ends 2,500.00 10 Pcs Stainless Steel Beaker 1 Liter Capacity 15,000.00 10 Pcs Stainless Steel Beaker 500ml Capacity 13,500.00 25 Pcs Triangular Glass Spreader, 20 Mm X 30 Mm 41,250.00 50 Pcs Glass Beaker, 150ml Capacity 17,500.00 50 Pcs Glass Beaker, 50ml Capacity 12,500.00 15 Pcs Erlynmeyer Flask, 1000ml Capacity 37,500.00 10 Pcs Erlynmeyer Flask, 500ml Capacity 11,000.00 37 Pairs Petri Dish, 90 Mm 16,650.00 50 Pcs Glass Beaker, 50ml Capacity 17,500.00 50 Pcs Glass Beaker, 100ml Capacity 17,500.00 50 Pcs Glass Beaker, 150ml Capacity 17,500.00 50 Pcs Glass Beaker, 250ml Capacity 17,500.00 50 Pcs Glass Beaker, 350ml Capacity 20,000.00 54 Pc Filter Paper, Ordinary, 24"x 24" 1,512.00 5 Box Qualitative Filter Paper No. 1: Nominal Air Flow Rate:13 S/100 Ml/in²; Nominal Basis Weight 87 G/m²; Nominal Thickness 180 Μm; Typical Particle Retention In Liquid 2 11 Μm 7,500.00 5 Set Micropippette Set With Adjustable Volume (0.5- 10 Ul, 10-100 Ul, 100-1000ul) 85,000.00 Other Supplies 5 Unit "electronic 6.1-inch Digital Caliper With Lcd Readout And Storage Case Individual: Switch Between Sae (inches), Metric (millimeters) And Sae Fractional Units Features A Large Easy-to-read Lcd Screen Resolutions Of 0.0005 In., 1/128 In. Or 0.01 Mm Provide Maximum Accuracy Takes Measurements Up To 6.1 In. In Size Includes A Sturdy Carrying Case And A 3-volt Cr2032 Battery" 15,000.00 4 Set 7.87 Inch Plastic Secchi Disc: The Package Contains 1 Piece Of Secchi Disk, 1 Roll Of Holding String, 1 Piece Of Cone Weight, And 1 Piece Of Tape Measure 8,000.00 1 Unit "ph Meter: Maximum Ph14ph Minimum Ph 0ph Ph Resolution0.1ph Best Ph Accuracy±0.1ph Length175mm Dimensions175 X 41 X 23mm Minimum Operating Temperature0°c Height23mm Width41mm Maximum Operating Temperature+50°c Weight95g Battery Typebutton Cell (1.5 V) X 4battery Life700 Power Sourcebattery" 12,381.70 5 Unit "multi-parameter Test Kit Combined Ecology: Model: Al-36b Number Of Tests: 100 Parameter: Measures Acidity, Alkalinity, Carbon Dioxide (1.25-100 Mg/l), Dissolved Oxygen (0.2-20 Mg/l), Hardness, And Ph (4-10). Platfrom: Color Disc Included: Includes Twelve Reagents, Bottles, Sample Cell With Cap, Color Disc, Viewing Tubes, Comparator Box, Measuring Tube, Instructions And Rugged Carrying Case." 39,000.00 4 Unit "titration Set: Innovating Science Lab Titration Kit: Hcl, Naoh Solutions With Burette, Stand & Clamp Item Volume 50 Milliliters Item Form Liquid Titration Set || Acid & Base || Hydrochloric Acid (2m, 500ml) And Sodium Hydroxide (1.0m, 1l) Durable Lab Stand || Chemical-resistant Steel Ring Stand (8""x5"" Base And 24"" Rod) Suitable For Various Lab Applications, From Funnel Support To Test Tube Holding. Precision Burette || 50ml Capacity, Class A Accuracy With ±0.05ml Tolerance, Borosilicate Glass, And Straight Bore Ptfe Stopcock; Equipped With Clear 0.1ml Blue Graduations. Burette Clamp || Double-sided Butterfly Style, Spring-loaded Jaws That Can Hold Burettes Up To 100ml, Fits Max 16mm Diameter Rods." 11,200.00 2 Unit "weighing Scale, 1.5kg Weight Capacity Resolution 1:30000 Parts Counting Yes Power: 220 Vac / 50 Hz Internal Universal Power Supply, Internal Rechargeable Lead Acid Battery Weighing Units: Kg Or G, Lb, Oz, Lb:oz (only Kg And G Are Available In Lft Mode) Display: Lcd Display With White Backlight, 1.1in/28mm High Digitslcd Display With White Backlight, 1.1in/28mm High Digits Operating Temperature Range: -10 °c To 40 °c Operating Temperature Range -10 °c To 40 °c Platform Size (w × L) 300 × 225 Mm Scale Dimensions (w × L × H) 311 × 327 × 117 Mm Shipping Dimensions (w × L × H) 397 × 447 × 195 Mm Net Weight 4.2 Kg" 90,000.00 1 Unit "universal Oven: Working Temperature Range At Least 5 (un/unplus/unm/unmplus) Or 10 (uf/ufplus/ufm/ufmplus); Above Ambient Temperature To +300 °c; Setting Accuracy Temperature Up To 99.9 °c: 0.1 / From 100 °c: 0.5; Capacity: Volume :108 L; Max. Number Of Internals:5; Max. Loading Of Chamber: 175 Kg; Max. Loading Per Internal: 20kg Voltage Electrical Load 230 V, 50/60 Hz Approx. 2800 W Ambient Temperature +5 °c To +40 °c Humidity Rh Max. 80 %, Non-condensing Dimensions W(a) X H(b) X D(c):atleast 560 X 480 X 400 Mm" 28,000.00 3 Unit " Wired Digital Thermometer Model Number: Rs40 Thermometer Type: Handheld Number Of Temperature Inputs: 1 Absolute Maximum Temperature Measurement: +200°c, +392°f Temperature Scale: Centigrade/fahrenheit Display Type: Lcd Resolution: 0.1° Best Accuracy: ± 2°c (± 4°f) Minimum/maximum Recordings: Yes Automatic Shut-off: Yes Calibrated Certificate: No Operating Temperature: Min: -50 °c To Max: +200°c (-58°f To +392°f)" 12,180.00 3 Unit " 750i Rugged Gps Touchscreen Navigator With Inreach® Technology And 8 Megapixel Camera Physical Dimensions: 3.6"" X 7.2"" X 1.3"" (9.19 X 18.30 X 3.27 Cm) Display Size 2.55""w X 4.25""h (6.48 X 10.80 Cm); 5"" Diag (12.70 Cm) Battery Life Gps Mode: Up To 18 Hours Gps Mode, 10 Min Tracking: Up To 18 Hours Expedition Mode: Up To 330 Hours Expedition Mode, 30 Min Tracking: Up To 300 Hours Memory/history 16 Gb (user Space Varies Based On Included Mapping) External Memory Storage Yes (32 Gb Max Microsd™ Card) Wireless Connectivity Yes (wi-fi®, Bluetooth®, Ant+®) Camera Yes (8 Megapixel With Autofocus; Automatic Geo-tagging) In The Box: Montana 750i, Lithium-ion Battery Pack, Usb Cable, Documentation Accessories: Ac Adapter Cable, Europe, 4gb Microsd Card With Sd Adapter, High-speed Multi-charger, Hrm-dual, Suction Cup Mount With Speaker, Bicycle Handlebar Mount, Marine Mount With Power Cable, Motorcycle/atv Mount Kit And Amps Rugged Mount With Audio/power Cable, Lithium-ion Battery Pack, External Gps/iridium Antenna With Adapter Cable, External Antenna Adapter Cable, Amps Rugged Mount With Audio/power Cable, Dual Port Usb Power Adapter, Microusb 2a Charging Cable, Tempe™, Usb-c Ac Adapter,garmin Connect™ App" 111,999.00 1 Unit "portable Soil Analyzer Model: Rs-trrec-n01-1-ex Power Supply: Battery-powered (5000mah Lithium Battery) Display Method: 2.8 Inch Lcd Display Data Storage: 100w Data Charging Time: ≤8h Working Environment: Temperature -10℃-50℃, Humidity<95%rh No Condensation Accessible Equipment: 1-4 Modbus Device Combination Letter Of Agreement: Modbus-rtu Operating Voltage: Dc 3.7v Standby Time: More Than 8h Continuous Size: 209*100*36 Mm Weight: 500g" 24,836.00 5 Unit "toploading Balance (300 G/0.01g) 1mg High Precision Balance With Small 100g~300g Capacity Calibration Way Weight Calibration Anti-vibration Adjustable Wave Filter Intensity Function Housing Fully Aluminum + Abs Display Vatn Backlit Lcd Display Stable Time 3-10s Adjustable Unit G, Mg, Ct, Oz, Ozl, Dwt, Gn, Lb, N, Dr, Tlt, Tls, Tlh, T(tola), T/a/r(tola/anna/rati), /a/r(tola/mna/rati), Ms(mesghal), Bat, /lb(parts Per Pound),kg,20units Selectable Interface Rs232 Weighing Mode Lock Weighing Mode Lock Automatically Underhook Fit With Underhook Housing Size Without A Shield 310x200x95mm Housing Size With Shield 310x200x270mm Plate Size Φ90mm Power Supply Dc8.4v1a " 50,000.00 2 Unit "digital Microwave (23 L Capacity) Electrolux Emm23m38gb 23l Free-standing Microwave Oven Type Of Control: Electronic Push Bottom + Digital Dimension:width 498 Mm;height 288 Mm Door Type: Handle Display Type: Led White Color Cavity Materials: Grey Voltage (v) 230 Microwave Power (w): 800 " 19,000.00

Details: Description Republic Of The Philippines Province Of Aklan Municipality Of Kalibo Invitation To Bid For Purchase Of Tactical Emergency Response Vehicle For The Operation Of Disaster Preparedness, Response, Rescue Activities And Emergency Response Vehicle Use At Municipal Disaster Risk Reduction Management Office, Kalibo, Aklan The Municipality Of Kalibo, Through The General Fund 2025 Intends To Apply The Sum Of Two Million Five Hundred Thousand Pesos (2,500,000.00) Being The Abc To Payments Under The Contract For Purchase Of Tactical Emergency Response Vehicle Use At The Municipal Disaster Risk Reduction Management Office, Kalibo, Aklan With Identification Number 05-001-751-25. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item Description Unit Quantity 1 Tactical Emergency Response Vehicle Unit 1 04 (terv04) Base Vehicle: 2.4 Utility Van Lwb Dsl Engine: 2gd-ftv, 2.4 L Straight-four Common Rail Diesel Engine Engine Displacement (cc) Displacement 2393 Cc, Emission Rating: Euro 4, Max. Power: 150/3400 (ps/rpm), Max. Torque: 343/1400-2800 (n-m/rpm, Overall Dimensions (mm): 5,303 X 1,705 X 2,097, Wheelbase (mm): 3,085, Seating Capacity: 2 + 12 Tread (front/rear): 1510/1510, Min. Turning Radius: 5.4, Fuel Tank Capacity: 50 Liters Transmission: Manual 5 Speed, Front Brake/rear Brake: Disc/drum, Suspension: Ifs Coil/rigid Leaf Spring, Tires/ Wheel: 195r14c Steel Fx Body Features: Body Made Of Pressed And Electrically Welded Galvanized Iron Sheets, Polyurethane Finish, With Air Conditioning System Interior Features: One Side Medical Cabinet, Folding Bench Seat Stretcher Ramp With One (1) Collapsible Stretcher Spine Board Holder Iv Holder Interior Lighting Grab Handles Oxygen Tank With Mount And Regulator Non Slip, Heavy Duty Ambulance Grade Flooring With Bacteriostatic Properties, Easy To Clean Hard Wearing Supplied And Installed Ambulance Equipment 1. Spinal Board With Pin The Spinal Board Spencer B-bak Pin Is A Device For Recovery, Immobilization And Transfer To A Main Stretcher Of Patients With Suspected Spinal Injuries Specific Features The Number Of Handles, Their Placing And Their Shape Offer Uneasy Grip Even Difficult Conditions. The Tapered Shape Allows Place The Device Inside Spencer Basket Stretchers Smooth And Rounded Surfaces Ensure An Effective Sanitation. Robust And Light Structure To Ensure High Resistance Slide On The Lower Side To Minimize Sliding Resistance During The Application The Low Thickness Makes The Application And Storage Easier Equipped With Pins To Allow Easy Fixing Of Belts With Snap Hook. Technical Data Dimensions: 1840x405x45 Mm Materials: Pe N” Handles: 14 N” Pin: 8 Loading Capacity: 180 Kg Weight: 6 ± 0,3 Kg 2. Compact Universal Head Immobilizer Technical Data: Base Dimensions (button Hole Exluded): 365x260x20 Mm Pillow Dimensions (1 Piece): 255x85x160 Mm Hole For Ear Inspection : Ø70 Mm Base Weight 360 Pillow Eight: 500 Overall Weight: 1.46 Materials: Pe, Pvc, Nylon 3. Reflective Universal Spider Straps System For Spine Boards Material: Nylon-polypropylene Width Of Strap: 53mm No. Of Connections: 10 V Tape Length: 250mm (min)/520mm (max) Transversal Tape 1 Length: 750mm (min) / 1350mm (max) Transversal Tape 2 Length: 600mm (min) / 1250mm (max) Transversal Tape 3 Length : 550mm (min) / 1110mm (max): Transversal Tape 4 Length: 4. Aneroid Sphygmomanometer With Large Dial And Protection And Sprague Rappaport Stethoscope Ce Certified Material: Pe, Nylon, Rubber, Al Extended Cuff Dimension: 530x145mm Rubber Protection Dimension: 220x150mm Dial Diameter: 130 Mm Pipe Length: 50cm Spiral Pipe Length: From 50 To 172 Cm Manometer Range: 0-300 Mmhg Weight: 1.1 Kg Md Class Im Ce Marked According To Dir. 93/42/cee Conforms To Uni En Iso 81060-1 Highly Visible Dial With Rubber Protection Dgx 189 Stethoscope Technical Data: Bell Maximum Diameter: 45mm Bell Minimum Diameter: 31 Mm Tubes Length : 56 Cm Weight : 235g Vehicle Emergency Warning System A. Led Light Bar – 1 Set R/w (preferred Made In The Usa) High-performance All Led Lightbar With Rear Work Lights And Cruise Mode; Stop/turn/tail Functionality. Specifications: Input Voltage: 12v Current Draw: 16 Amps Cable Harness : 10 Feet Dimension: 49.8” X 1.6” X 12” 4-watt Cree Leds 40° Optics With Stop, Tail, Turn (stt) Meets Or Exceeds Sae Class 1 5 Year Warranty Made In The Usa B. Siren And Public Address System The Full Function Is A Controller And Siren All-in-one Solution. The Controller Has 6 Programmable Buttons To Pair With Any Emergency Vehicle Light. The Is The Most Advanced Siren For Cars, With 21 Police And Fire Tones, Integrated Wig-wag, Air Horn, Horn Ring, Park Kill And Radio Rebroadcast Functionality. Full Function Siren Specifications: 100w 21 Programmable Siren Tones 5. Auxiliary Outputs (3.5a) Auxiliary Buttons Programmable As On/off Or Momentary Integrated 2 Output Wigwag Capability (for Lights) All In 1 Unit (no External Relay) Rotary Switch Included Mic Air Horn, Park Kill, Radio Rebroadcast Capabilities Led Backlit Buttons Volume Control Legend Sheet Included Rugged Metal Housing Includes Dash Mount Bracket Dimensions: 7.4 L X 4.84” W X 2.53” H Controller Dimensions: 6.77 L X 2.43” W X 1.21”h Certifications Sae J1849, Sae J1119 Mic Cable Length: 2 Feet Max Current Draw: 20a Triton 100w Speaker/siren Specifications: 124db Sound Output 1000watts 85 Degree Sound Dispersion Lightweight Durable Polycarbonate Frame Compact Design To Fit Behind A Grille Includes L-shape Mounting Bracket Rugged Weather-resistant Enclosure Functions With Any Existing Siren Dimensions: 3” H X 7 L 7” L Impedance Of 11 Ohms Neodymium Magnet Certifications: Sae J1849 Frequency Response Of 600-2700hz Additional Works And Supplies One (1) Lot Supply And Installation Of Custom Decals And Markings One (1) Lot Supply And Installation Of High Quality Tint, Except Windshield, Driver And Front Passenger Windows Supplies Vehicle Accessories One (1) Set Standard Manuals, Tolls And Hydraulic Bottle Jack As Provided By The Vehicle Manufacturer One (1) Set Spare Tire With Rim One (1) Set Ewd Includes: Three (3) Years Lto Registration Terms And Conditions: • Base Vehicle Must Be Brand New And No Prior Registrations. Vehicle Must Be Registered Only To The Lgu. • To Ensure Technical Compliance, After Sales Support And Warranty. Bidders Must Provide Manufactured Issued Products Sheets For Offers As Part Of Technical Requirement In The Bidding Documents Showing Technical Compliance Backed With Distributorship Certificates With Warranty Commitment For The Following Critical Ambulance Equipment. Failure Of Which Shall Be Ground For Disqualification. ° Ambulance Wheeled Cot ° Folding Stretcher ° Scoop Stretcher ° Potable Suction Machine ° Stair Chair ° Electronic Visual And Audio Emergency Warning System (lightbar, Siren, Speakers, Surface Mounted Lights & Controllers) • Equipment With Required 10g Fixation Must Attached Corresponding Certifications • Supplier Must Conduct Orientation And Basic Training On The Proper Use And Maintenance Of The Installed Equipment • Offer Includes Delivery And After Sales Support The Municipality Of Kalibo Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within One Hundred Twenty (120) Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Municipality Of Kalibo And Inspect The Bidding Documents At The Address Given Below During 8:00 -12:00 A.m. And 1:00 – 5:00 P.m., Except Saturdays, Sundays & Holidays. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On June 9 – 25, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. The Municipality Of Kalibo Will Hold A Pre-bid Conference On June 13, 2025; 9:00 A.m. At 2nd Floor Municipal Conference Hall, Old Building, Kalibo, Aklan. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 8:30 A.m. Of June 25, 2025. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On June 25, 2025; 9:00 A.m. At 2nd Floor, Municipal Conference Hall, Old Building, Kalibo, Aklan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Municipality Of Kalibo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Leah E. Yarre Bac – Secretariat Telephone Number (036) 268-4436 You May Visit The Website: For Downloading Of Bidding Documents: Www.kaliboaklan.gov.ph Sgd: Mary Gay Q. Joel Bac Chairperson

Details: Description City Health Office-medicines 9 700 Bxs Amoxicillin 250mg Cap In 100’s 125.00 10 1633 Bxs Amoxicillin 500mg Cap In 100 133.00 36 14 Bxs Doxycycline 100mg Cap In 100 98.00 44 60 Bxs Ibuprofen 200mg Tab In 100 105.00 60 120 Bxs Omeprazole 20mg Cap In 100 96.00 61 5 Tubes Oxytetracycline Hcl 5mg + Polymyxin B Sulfate 10,000 Units/g Eye Ointment Tube 3.5g 700.00 Cho-medical, Dental And Laboratory 94 2 2 Boxes Alat/sgpt Sl 5 X 125 Ml Nt 15,085.70 121 3 Bots Immersion Oil Type A In 30 Ml 1,400.00 127 3 Pcs Styro Box - Small 150.00 148 2 Kits Papanicolau Stain In 500 Ml 7,500.00 150 1kit Statlyte C Reagant Pack ( Na, K, Cl, Ca,ph ) 58,570.00 151 1 Bot Qc Solution 100 Ml 11,656.10 152 1 Bot Weekly Cleaning Solution 100 Ml 11,656.10 153 1 Bot Ph/na/cl Filling Solution 15 Ml 7,601.80 154 1 Bot Ca Filingfgsolution 15 Ml 7,601.80 155 1 Bot Reference Filling Solution 15 Ml 7,601.80 156 2 Bot K Filling Solution 15 Ml 7,601.80 157 1 Bot Sodium Conditioner 100 Ml 11,656.10 164 10 Boxes Delicate Task Wiper ( Kimwipes ) In 280 300.00 165 250 Rolls Adhesive / Plaster Tape 1 Inch 75.00 167 20 Pack Cellophane Medium Size In 50 50.00 169 65 Gals Disinfectant Concentrate ( Lysol ) 1,500.00 170 30 Pcs Disinfectant Spray ( Lysol) In 538 Grams 550.00 172 5 Pcs Hand Towel - Long 75.00 174 1 Set Humizen 550 Hematology Analyzer 6 Months Maintenance Kit 30,000.00 177 1 Pc Humizen H550 Optical Lamp For Bench- 21,000.00 178 1 Set Complete Micropipette Kit With Stand, Tips And Tip Box ( 5 Ul - 10 Ul, 10ul -100 Ul, 100ul - 1000ul ) 30,000.00 191 1 Unit 10 Lbs Fire Stinguisher (red) 3,000.00 192 6 Pcs Pvc Filer Box 600.00 193 6 Tube Pits And Fissure Sealant 1,020.00 194 4 Bots Bonding Agent C Bond 960.00 196 200 Gals Alcohol 70%, 3 Ltrs 180.00 197 4 Tube Dental Etchant Gel 180.00 198 1 Pcs Dental Light Cure 3,000.00 199 1 Box Portable Dental Ultrasound Scaling Machine-woodpecker 18,000.00 200 1 Set U.v Sterilizing/disinfection Cabinet 12,000.00 202 2 Pcs Medical Trolley Cart 3,360.00 203 4 Pcs Dental Enamel Tray With Partition/divider 300.00 205 300 Pad Tooth Brush For Kids 12pcs Per Pad 108.00 208 2 Pcs Big Flash Light 720.00 209 10 Tube Ky Jelly 150g 180.00 211 30 Pc Styrofoam Boxes 8.5x7.5x6.75 150.00 216 10 Box Adhesive Tape/pluster 1inch,3m In 12’s 420.00 221 40 Box Dental Needle G-27 315.00 224 10 Bot Fabre Softener 500ml 110.00 226 200 Bot Hydrogen Peroxide Solution In 500ml 60.00 228 16 Pcs Laundry/cloth Brush 40.00 229 20 Packs Disposable Container Microwavable100ml 100.00 230 20 Packs Ice Wrapper 100/pcs 40.00 234 30 Box Policresulen 90mg Vag. Suppository In 6 Albothly 1,278.00 238 75 Box Sterile Gloves Size 6.5 In 50 Pairs 800.00 241 104 Pcs Vaccine Thermometer 200.00 242 20 Pack Ziplock-large Size 9 300.00 243 60 Pcs Expanded Zipper Bag Long, Plastic Evelope 100.00 247 40 Mtr Cloth (white) 80.00 248 40 Mtr Clorth (green) 80.00 252 3 Pc Black Trash Bin With Cover 500.00 253 6 Set Pulse Oximeter 400.00 255 3 Kits Diapro Anti Hcv- Elisa Fully Automated, 480 Tests In Wells Compatible To Dynex Ds2 Machine, Saccl-approved 46,000.00 256 3 Box Diapro Hiv (ag/ab) Elisa Compatible To Dynez Ds2 Machine In 480 Tests 50,000.00 257 3 Kits Diapro Syphilis Elisa Fully Automated 480 Test In Wells Compatible To Dyne Ds2 Saccl Approve 22,000.00 270 10 Pc Potable Telescopic Stool 180.00 272 3 Roll Drawstring Garbage Bag In 100s 85.00 273 3 Box Storage 18l Transparent 350.00 Upper Pulangi Lying-in Clinic Laboratory Supplies 278 3 Bottle Disinfectant Spray(lysol) Strawberry Flavor In 538gms 550.00 Medical Supplies 289 2 Pcs Ampule Bottle/vial Opener 100.00 290 2 Pcs Pill Cutter Portable , Small Size , Plastic 80.00 296 1 Unit Ecg-1106g Monochrome Screen 6 Channel, Bulb And Clamp Type Electrodes 45,000.00 297 1 Pieces Emergency Trauma Bag Kit By Elite Bags 8,500.00 298 1 Unit 8 Inches Electronic Portable Vital Signs Monitor 6 Parameter Ecg Machine Bp, Resp, Temp,spo2, Pr 35,000.00 304 3 Unit Emergency Light Tricolor Ael-390 2,300.00 Medicines 308 1200 Bottle Amoxicillin Trihydrate 250mg/5ml Susp In 60ml 21.30 309 80 Box Amoxicillin Trihydrate 250mg Capsule In 100’s 128.00 310 240 Box Amoxicillin Trihydrate 500mg Capsule In 100’s 140.00 315 40 Tube Acapulko Ointment 75.00 322 30 Bottle Azithromycin 200/5ml Susp I20ml 114.00 323 16 Box Betahistine 20 Mg Tablet 100 500.00 324 35 Piece Bisacodyl 5mg Suppository 20.00 327 40 Box Carbocisteine 500mg Capsule In 100’s 32.50 331 20 Box Ciprofloxacin 500mg Tablet In 100’s 130.00 333 800 Bottle Cefalexin 250mg/5ml Susp In 60ml 26.50 342 100 Bottle Clarithromycin 125mg/5ml In 50ml Susp 70.00 343 100 Bottle Cefixime 100mg/ml Susp In 60ml 70.00 346 300 Bottle Cotrimoxazole 200mg/40mg/5ml Susp In 60ml 18.00 349 200 Bottle Co-amoxiclav 228.5mg/5ml Susp. 70ml 136.85 361 80 Bottle Erythromycin Syrup 200mg/5ml In 60 Ml 40.00 362 35 Box Fluticasone+salmeterol+125mcg+25mg120doses(inhaler) 228.75 370 60 Box Ibuprofen 200mg Tablet In 100’s 105.00 371 120 Bottle Ibuprofen Syrup 100mg/5ml In 60ml 68.74 376 80 Box Lozartan 100mg Tablet 100 169.00 390 40 Tube Nitrufuranzone 0.2% Cream 120.00 392 80 Box Omeprazole 20mg Capsule 100 96.00 393 20 Ampule Omeprazole 40mg Ivt Ampule 24.78 395 20 Ampule Pantoprazole 40mg Ivt Ampule 50.00 399 35 Piece Paracetamol 125mg Suppository 16.91 400 8 Box Prednisone 20mg Tablet 100 245.00 410 20 Tube Terramycin Eye Ointment 250.00 417 3 Vial Hysocine-n-butylbromide 20mg/ml 1ml Ampule 17.23 418 3 Vial Hydrocortisone 250mg Powder Vial 54.32 432 35 Ampule Lidocane 20mg/10mg/ml Ampule 50.00 433 10 Box Clotrimazole 100mg Vaginal Suppository 6s 200.00 434 4 Bottle Albothyl (policresulen) 100ml Vaginal Suppository 1,100.00 439 20 Ampule Dexamethasone 4mg/ml Or 5mg/ml Ampule 60.00 443 15 Box Silk 3-0 Suture Round In 12 350.00 446 5 Ampule Betamethasone 5mg/2mg/ml Ampule 900.00 453 10 Box Sterilization Pouch S.5.25"x10" In 200 600.00 454 10 Box Sterilization Pouch S.3.5"x10" In 200 600.00 455 2 Box Disposable Apron, Polythene(75cmx110cm) In 100’s 300.00 460 5 Box Syringe 10cc, 25 Guage In 100’s 1,000.00 461 1 Box Syringe 20 Cc, 100’s 1,000.00 471 4 Box Urinary Catheter French #16 Forwomen In 10’s 300.00 479 1 Box Methergine (methylergonovine Melate) 0.2mg/ml Ampule 10s 500.00 480 30 Oxygen Tank Refill 1,000.00 481 120 Piece Tetanus Toxoid 0.5ml Vials 70.00 495 10 Piece Silicone Nasogastric Tube (ngt) Fr. 16 200.00 496 150 Pack Toothbrush Soft Bristle With Toothpaste (adult) 50.00 499 2 Unit Accu-check Instant 100’s Strips 2,000.00

Details: Space Systems Command (ssc) International Affairs Office(ssc/ia) Los Angeles Air Force Base, Ca Launch Vehicle And Spaceport Assessment Request For Information primer: Ssc/ia Received A Letter Of Request (lor) For Letter Of Offer And Acceptance (loa) From A Partner Nation (pn). As The Primary Poc For Space Foreign Military Sales (fms), It Is Incumbent Upon Ssc/ia To Respond To The Lor For Loa With Rough Order Of Magnitude (rom) Costs For The Defense Articles And Services Specified In The Lor. As A Result, Ssc/ia Is Conducting Market Research To Respond To The Partner Nation’s Request. please Note: Responses To Lors For P&a Are Non-promissory And Therefore There Is No Guarantee That This Request For Information (rfi) Will Result In A Request For Proposal (rfp). Ssc/ia Anticipates Similar Requests From Other Partner Nations And May Repurpose The Market Research Garnered From This Rfi To Respond To Future Lors For Loa. The Lor For Loa Response Provided To The Partner Nation Does Not Guarantee The Sale Of The Services In Question. 1. Background ssc/iais Seeking Industry Quotes For Acquisition Technical Assistance For Assessing The Requirements And Interfaces Of A Launch System And A Contractor Designed, Developed And Operated Spaceport That Includes Facilities For Launch, Launch Integration, Space Vehicle Processing And Integration, Providing Mission Assurance, And Day-of-launch Activities For The Pn’s Ongoing Military Modernization Effort. Ssc/ia Is Currently Building A Response To An Official Letter Of Request (lor) For Letter Of Offer And Acceptance (loa) To Provide The Pn With A “total Package Approach” Cost For Their Planning Purposes. Ssc Is Seeking Specific Technical Studies Information Described In Sections 6 And 7 Of This Document. The Timeframe Associated With Acquiring The Referenced Technical Assistance Projects Potential Contract Award In 2025 With A Required 18-month Period Of Performance, As Requested By The Pn In Their Lor For Loa. Rfi Responses Shall Include Information That Allows Ssc/ia To Assess Your Ability To Help Develop A Spaceport And Provide Launch Mission Assurance For The Pn. This Includes Providing The Technical Background That Demonstrates Deep Knowledge And Experience As It Relates To The Entirety Of Launch Site Development, Build, And Mission Integration. This Should Include Experience And Knowledge Of Launch System Facilities, Processes/procedures, Safety Requirements (flight And Ground), Logistics (e.g. International Shipping), Security (physical And Cyber), Radio Frequency (rf) Communications And Tracking, And Other Pertinent Information That Describes Your Ability To Provide The Technical Assistance Requested. Finally, Any Tools To Manage Requirements, Provide Mission Assurance Analysis, Develop/manage And Execute Plans Should Be Included. 2.use Of Non-government Advisors the Government Intends To Use U.s. Government Personnel To Review The Rfi Responses. The Government Reserves The Right To Use Contractor Personnel, Including, But Not Limited To, Ssc Federally Funded Research And Development Center (ffrdc) And Systems Engineering And Technical Assistance (seta) Contractors. Contractor Support Will Be Bound By An Appropriate Non-disclosure Agreement (nda) To Protect Proprietary And Sensitive Information. Additional Ndas Will Not Be Required As Responses To This Rfi Will Be Considered An Implicit Acknowledgment And Acceptance That Non-government Advisors Will Be Assisting The Government In The Review Process. 3.guidelines For All Submissions the Rfi Is Market Research And Will Not Result In An Award The Cost Of Preparing The Rfi Responses Is Not An Allowable Direct Charge To Any Government Contract. all Interested Vendors Are Requested To Provide: statement Of The Vendor’s Capability To Provide The Technical Assessment Of A Launch Vehicle And Spaceport Described Below rom Cost To Provide Services/supplies, rom Schedule To Provide Services/supplies. label And Portion-mark Rfi Responses Appropriately; The Overall Classification Of An Rfi Response Should Not Exceed Nato Secret. provide An Initial Plan On How Itar Will Be Addressed. include A Cover Sheet With Company Name, Address, Date, Rfi Response Poc With An Email Address And Phone Number. ssc Will Not Consider Unnecessary Brochures Or Proposals. ssc Will Welcome Proficiency Demonstrations, Use Cases, And Lessons Learned. rfi Responses Will Use 8.5 X 11-inch Portrait Format Pages With Single-spaced Times New Roman 12-point Font With 1" Margins. The Landscape Format Is Acceptable For Charts And Graphs Only. rfi Responses Shall Not Exceed Thirty Pages. rfi Responses Must Be Delivered As Either A Pdf Or Microsoft Word Document. rfi Responses May Be Submitted Electronically Via Nipr To The Ssc Point Of Contact Listed Below. rfi Responses Are Due No Later Than 1700 Pdt On 02/14/2025 To The Ssc Point Of Contact Listed Below. Mr. Keith Brandner, Contracting Officer, Keith.brandner@spaceforce.mil Ms. Melina Monroy-szita, Contract Specialist, Melina.monroy-szita@spaceforce.mil 4.next Steps once The Rfi Responses Are Received, Assessed For Feasibility And Affordability, Ssc/ia Will Reach Out To The Pn. If A Virtual One-on-one Is Requested By The Government For Clarification Of Any Responses, The Government Contracting Office Representative(s) Will Contact The Submitters Poc Listed On The Cover Sheet To Schedule A Virtual Meeting. 5.concepts Criteria for Each Study Area, Address To The Best Extent Possible: requested Criteria expertise To Accurately Assess What Is Being Requested additional Information Needed Form Either The U.s. Government Or Pn associated Risks concepts Cost Details 6.initial Study Overview the Pn Is Requesting Technical Assistance Across Multiple Disciplines To Include But Not Limited To; Mechanical And Electrical Engineering, Systems Engineering (requirements Derivation, Verification And Validation Planning), Launch Site Processes/procedures, Safety (ground And Flight), Logistics (to Include International Shipping, Rf Communications, Facility Requirements (related To Launch Vehicle (lv), Space Vehicle (sv) And Lv/sv Integration), Ground Support Hardware And Lv To Launch Site Interfaces. The Assessment Is Intended To Be Used By The Pn To Understand Feasibility, Requirements (interface Control Document-type Information Between Lv/sv And Spaceport), And Risks Of Standing Up A Spaceport Capability To Launch Pn National Security Payloads. The Study Shall Also Include Support Of Meetings And Discussions As Well As The Delivery Of A Report, And Other Supporting Documentation. 6.1assessing Commercial Launch Provider provide Assessment Of The Commercial Launch To Meet The Mission Requirements Of The Pn’s National Security Space Using U.s. Space Force Evaluation Criteria. Part Of The Assessment Includes Recommended Tailoring Of Said Evaluation Criteria That Aligns With The Goals And Requirements Of The Pn. The Assessment Shall Include Assessment Of Vehicle Performance, The Launch Company’s Processes And Procedures, Its Ability To Follow And Adhere To Its Internal Standards, Capability Of Meeting The Foreign Regulations And Certifications, Accommodate Pn’s Satellites And Meet Their Mass And Orbit Performance. Additionally, The Assessment Should Include Any Identified Risks With The Priority On Technical But Also Identification Of Any Cost And Schedule Risks/concerns That May Be Evident. assessment Includes Identification Of Items That Require A Change To The Standard Commercial Vehicle That Derive From Sources Such As The Pn’s Mission Objectives, Logistics, Foreign Certifications/regulations And Launch Site Interfaces. Finally, An Assessment Of The Launch Contractor To Meet Both Physical And Cyber Security Requirements Imposed Or Unique To The Pn. 6.1.1 Launch Vehicle To Launch Site Icd: provide An Assessment Of The Lv To Launch Site Icd (or Equivalent Document(s)) To Ensure At The System Level The Pn Can Execute A Launch Of A National Security Space Asset From The Launch Site. 6.1.2 Communications: assess The Rf Concept To Ensure That The System Meets The Pn’s Requirements As Well As Any Required Regulatory Requirements. This May Include, But Not Limited To, Launch Vehicle Telemetry Collection, Flight Safety (if Autonomous Flight Safety Is Not Used), And Space Vehicle Separation (if Required). Additionally, Does The Launch Vehicle Provider Have A Plan That Will Meet The Pn’s Security Requirements For Communications, Information Technology (it) Equipment As Well As Assembly, Integration, And Test (ai&t) Equipment. 6.1.3 Launch Site Systems: provide An Assessment Based On The Icd, Ground Support Equipment, And Ground Handling Processes And Procedures That All Equipment Meets Requirements, Capable Of Being Certified And Has Proper Interfaces. Assessment Should Also Include Launch Vehicle And Expected Space Vehicle Commodity Requirements Such As Liquid Nitrogen, Hydrazine, Kerosene, Liquid Oxygen, Etc. The Launch Site Systems Includes Both The Payload Processing Facility And Launch Pad. 6.2launch Vehicle Safety Assessment transportation - Provide An Assessment Of The Launch Vehicle Transportation Plan To Include General Ability To Meet International Shipping Requirements, Physical Security Of Hardware While In Transit And On Launch Site Transportation And Handling. Identify Items That Have Elevated Risk Such As Systems That Have Not Been Tested To Meet Un Shipping Requirements (e.g. Batteries) Or Other Items That May Require Modifications Needed To Ensure Safe Transport Into The Launch Site. In Addition, Provide An Assessment Of The Shipping Hardware To Ensure That It Is Capable Of Shipping The Launch System To Include Compatibility With Shipping Methodology As Well As Protecting Hardware During Shipment. flight – Assess The Launch Vehicle Provider’s Approach To Flight Safety And Identify Any Short Falls That Introduce Risk. If Applicable, Recommend Areas For Tailoring To Reduce New/additional Qualification. 6.3requirements Recommendations work With The Pn To Understand Their Objectives And Risk Tolerance For The National Space Assets. Based On That, And The Assessment Of The Launch Provider And Their Launch Solution, Recommend And Prioritize Requirements To Ensure The Launch Solution Will Meet The Pn’s Mission Objectives. It Is Recognized That This Is A Challenging Task As The Most Efficient Approach Is To Utilize The Standard Launch Vehicle That Is Offered, Using The Requirements Defined In A User’s Guide For Space Vehicles To Design To, And Making Changes Introduces Risks. Provide Your Recommended Approach, Such As Accept A Launch Provider’s Baseline System And Respond To Mission Unique Requirements As Needed, Or Other Solutions. 6.4safety Documentation support The Development Of Safety Documentation That Meets The Pn’s And Launch Authority Requirements. This May Include Identify The U.s. Government / U.s. Space Force Test, Evaluation, And System Safety Documentation That Would Be Applicable To The Pn’s Activities. This May Also Include Recommending Tailored Approaches To Said Documents. If No Existing Documentation Exists In The U.s. Government For The Pn’s Specific Use Case (i.e. Launch Site Location, Launch Vehicle Operating Conditions), Provide A Recommendation Of The Documentation Required. 6.5launch Pad Sustainment Cost Analysis provide An Assessment Of The Launch Site Sustainment Costs. Provide Recommendations Where Efficiencies May Be Achieved As Well As Identifying Any Items Missed To Support The Pn’s Funding Forecast. Based On The Pn’s Mission Concept, Assess Any Unique Capability Needed And The Associated Sustainment. Examples Might Be, But Not Limited To, Pad Spares, Redundant Capability, Automated Tools And Other Hardware/software. 6.6launch Readiness Verification Process support The Development Of A Launch Readiness/certification Process (aligned To The Terminology Of The Pn) That Meets The Risk Acceptance Of The Pn. Recommend Applicable U.s. Space Force Launch Readiness Verification (lrv) Requirements And Procedures For Both Launch Vehicle And Spacecraft And Recommend Tailoring To The Pn’s Requirements. 6.7 Site Surveys support On-site Surveys Of The Pn’s Launch Pad, Range, And Associated Facilities. 6.8requirement Definition Support provide To The Pn General Technical Assistance And Support In Their Requirements Definition Generation For Their Pn National Space Missions. 6.9space Training provide A Catalog Of Space Training Courses Available Through The U.s. Government Or Other Means For Pn To Participate In And Gain A Better Understanding Of Space Knowledge And Operations 6.10technical Interchange Meetings support Technical Interchange Meetings, Planning Conferences, Review Meetings, And Other Relevant Meetings To Be Defined By The Pn. Pn Is Requesting 20 Meetings Per Year (4 In-person, Either In The U.s. Or In The Pn’s Territory, And 16 Virtual). 7. Requirements Mapping Study develop A Requirements Matrix Or Other Traceability Tool That Enables The Ability To Verify And Validate Requirements.

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Ambulance Bid No. Nth-25-583-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 6 9. Clarification And Amendment Of Bidding Documents …………………………… 6 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 6 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 7 13. Bid And Payment Currencies ……………………………………………………… 7 14. Bid Security ………………………………………………………………………. 7 15. Sealing And Marking Of Bids ……………………………………………………… 7 16. Deadline For Submission Of Bids …………………………………………………. 8 17. Opening And Preliminary Examination Of Bids ………………………………….. 8 18. Domestic Preference ……………………………………………………………… 8 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 8 20. Post-qualification ………………………………………………………………… 8 21. Signing Of The Contract …………………………………………………………… 8 Section Iii. Bid Data Sheet …………………………………………………..9 Section Iv. General Conditions Of Contract ……………………...………..10 1. Scope Of Contract ………………………………………………………………… 10 2. Advance Payment And Terms Of Payment ……………………………………….. 10 3. Performance Security ……………………………………………………………. 10 4. Inspection And Tests ……………………………………………………………… 10 5. Warranty …………………………………………………………………………. 10 6. Liability Of The Supplier ………………………………………………………….. 10 Section V. Special Conditions Of Contract ………………………………….11 Section Vi. Schedule Of Requirements ……………………………………....13 Section Vii. Technical Specifications …………………………………………14 Section Viii. Checklist Of Technical And Financial Documents …………..17 Section I. Invitation To Bid Purchase Of Ambulance Bid No. Nth-25-583-b 1. The Iloilo Provincial Government Through The Supplemental Budget No. 1 Cy 2024 20% Ira Intends To Apply The Sum Of Two Million Four Hundred Thousand Pesos (php2,400,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Ambulance. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On May 5, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On May 13, 2025 At 9:00 A.m At 5th Floor,bac Secretariat, Iloilo Provincial Capitol And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before May 27, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On May 27, 2025 At 9:01 A.m. At The 5th Floor, Bac Secretariat, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com/bac@iloilo.gov.ph Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com April 29, 2025 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Ambulance With Bid No. Nth-25-583-b. The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Two Million Four Hundred Thousand Pesos (php2,400,000.00) 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [governor Niel D. Tupas Sr. District Hospital, Barotac Viejo, Iloilo] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; C. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); D. License To Operate (lto) Issued By Fda, If Applicable; E. After-sales Services/parts, If Applicable; F. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Governor Niel D. Tupas Sr. District Hospital, Barotac Viejo, Iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Ambulance With Complete Accessories 2.8l Diesel M/t 1 1 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Nth-25-583-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Ambulance With Complete Accessories 2.8l Diesel M/t Overall Dimensions: Length X Width X Height Mm 5,265 X 150 X 1,990 Wheelbase Mm 3,210 Ground Clearance Mm 175 Maximum Tire Turning Radius M 5.5 Fuel Tank Capacity L 70 Engine And Transmission Displacement Cc 2,755 Maximum Output Ps/rpm 176/3,400 Maximum Torque Nm/rpm 420/1,400-2600 Transmission 6-speed Manual Chassis Suspension Front/rear Mcpherson Strut/rigid Axle Leaf Spring Breaks Front/rear Ventilated Disc/drum Steering System Variable Power Steering Tires 215 / 70r16c Steel With Full Cap Exterior Headlamp: Bi-beam Multi-reflector Halogen With Integrated Turn Lamp Wiper: Front/rear Intermittent With Mist Rear Window Defogger: With Timer Interior Instrument Panel: Meter Gauge Analog With Digital Trip Meter With Multi Info Display Accessory Connector: Front 12v X 2 With Glove Box: Steering Wheel: Material 4-spoke, Urethane Switch Audio, Telephone, Voice, Mid Steering Column: Manual Tilt And Telescopic Adjustment Shift Lever Knob: Urethane Dash Mounted Front Personal Lamp: With Driver And Passenger With Room Lamp: Sun Visor: With Driver And Passenger Rear View Mirror: Day And Night Seats: Driver Slide, Recline And Vertical Adjust Front Passenger With Recline Adjust Front Center Passenger With Recline Adjust Cups/bottle Holder: Front Instrument Panel (2pcs), Center Seat Back (2pcs) Door Trim (2 Pcs) Audio System: 8” Display Audio Function Apple Carplay + Anroid Auto/tuner/usb/bt 4 Speakers Aircondition: Type Dual Front Manual Control Functions Power: Window With (driver/front Passenger Auto Up-down) With Door Lock Outside Rearview Mirror Adjust – Retract Illuminated Entry: Ignition Key + Lamp Light Control System: Sensor Only Key Remind Warning: With (buzzer) Safety: With Abs (anti-lock Break System) Srs Airbag: Driver + Front Passenger Front Seat Belt: 3 Pt. Elr (2 Pcs) + 2 Pt Nr (1 Pc) Vehicle Security System: Alarm With Immobilizer With Reverse Camera Inclusions: Tint Ewd Standard Tools And Materials Supply With Installation Of: -two (20) 20 Lbs Oxygen Tanks -wall Mounted B.p Apparatus With Stethoscope -first Aid Kit -oxygen Regulator With Humidifier & Nasal Cannula -(ambu Bag) Bvm (separate Unit For Adult And Pedia) -minor Surgical Kit -led Flashlight With Rechargeable Batteries -plastic Spine Board -led Gen 3 Bar Light Blinkers (red/blue) -dashboard Blinker Red/blue Gen3 Leds -tailgate Blinker Gen 3 Leds -ambulance Side Blinker Gen 3 Leds -siren Amplifier And Speaker, 100 Watts -headlight Blinker Module W/ Controller (wig-wag Controller) -5lbs Abc Dry Chem Fire Extinguisher -led Interior Light -i.v Hook -full One Side Medical Cabinetry With Vertical Clear Acrylic Sliding Shutter -side Cabinetry Includes Holder Of Two 20-lbs. Oxygen Tanks -installation Of Stretcher Bed With Ramp Approach (bi Steel Only) -stainless Bumper Approach Not Needed As Stretcher Does Not Hit The Rear Bumper -non-slip “checkered Plate” Design Vinyl Floor Covering Over 3/4” Marine Plywood Flooring -black Tint (except For Driver Side And Passenger Side Windows) -2-seater Bench With Storage Under Seat Equip With Seatbelts And Backrest -overhead Handrail -divider Between The Front & Patient Compartment Made Of Clear Acrylic Sheet -power Inverter 2,000 To 3,000 Watts -2 To 3 Gang 220v Power Outlet -supply Of Multi-level Stretcher With 181 Kgs Capacity And Includes Mattress & Straps Terms And Conditions 1. The Vehicle Shall Be Delivered To Iloilo Provincial Capitol, Iloilo City, Thirty (30) Calendar Days From Contract Effectivity. 2. Bid Tender Shall Be Supported With Evidence In The Form Of Manufacturer’s Unamended Sales Literature Of Product Data Sheet And Condition Statement Of Specifications And Compliance As Appropriate. 3. Warranty Period Shall Be One (1) Year After Acceptance, Or A Mileage Of One Hundred Thousand (100,000) Kilometers Whichever Comes First. 4. The Dealer Shall Shoulder The First Three (3) Years Lto Registration And One (1) Year Gsis Compulsory Third Party Liability (cptl) 5. The Dealer Shall Provide Seat Cover, Matting, Tint And Rustproofing. ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope (m) Original Of Duly Signed And Accomplished Financial Bid Form; And (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description Request For Quotation Rfq No. Svp 25-b-0182(re-bid) Date May 07,2025 Pr Reference 100-25-03-034 Philgeps Reference No. End - User Slaghterhouse Closing Date May 21,2025 Deadline/opening Date May 22,2025 Designated Places Of Submission (bid Box Designated Locations) 1. Bac Office, Cabcabon, Bayawan City 2. Public Market Office, Bayawan City 3. Sidlakan Extension Office (dgte. City) Note: Please Attach The Following Documentary Requirements Together With The Rfq 1. Mayor's / Business Permit 2. Philgeps Registration No: A. Philgeps Red Membership (for Svp,shopping,highly Technical Consultants) B. Certificate Of Philgeps Registration (platinum Membership)(np-two Failed Bidding) 3. Omnibus Sworn Statement Name Of Business: Address: Name Of Store: Business Permit No.: Tax Identification No.: Philgeps Reg. No.: The Local Government Unit Of Bayawan City, Through Its Bids And Awards Committee, Intends To Procure Goods/services As Enumerated In The Proposal Form. Please Submit Your Quotations/proposals Duly Signed By You Or Your Duly Authorized Representative Not Later Than The Closing Date For The Item(s) Described, Subject To The Terms And Conditions Provided At The Back Portion Of This Request For Quotation (rfq).basis Of Evaluation For This Rfq: By _____lot By _____item A Copy Of Your Current Business Permit And Philgeps Certificate Or Registration Is Also Required To Be Submitted Along Withyour Quotation/proposal. Quotations May Be Submitted Manually, Or Through Facsimile Or Email At The Address And Contact Numbers Indicated Below. For Any Clarification, Please Contact The Bac Secretariat At Telephone Number (035) 430-0281 Local 1210-1212 Or Email Address At Bac.bayawan@gmail.com. Virginia D. Sadiasa Bac Chairman Acknowledgement Receipt I/we Hereby Acknowledge Receipt Of This Request For Quotation (rfq), And Hereby Agree To The Terms And Conditions Set Therein. We Assume Responsibility To Deliver/submit Our Proposal On Or Before The Closing Date And Time At The Designated Bid Boxes; Otherwise, Lgu Bayawan City Can Consider Us Not Interested To Quote. (signature Over Printed Name / Date) Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. Errors In Price Quotation Shall Be Exclusively The Supplier’s Responsibility. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 2. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties, And/or Levies Payable. All Prices Offered Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 3. Quotations Exceeding The Approved Budget For The Contract (abc) Shall Be Rejected. 4. Indicate In The Proposal The Brand, Model And Technical Specifications Of The Items Quoted; Otherwise, The Bid Will Be Rejected. Specifying The Country Of Origin, The Terms “generic”, “original”, And The Like Are Not Considered Brand Names. Indicate No Brand If The Item Quoted Is Generally Unbranded. 5. Alternative Bids Shall Be Rejected Outright. For This Purpose, Alternative Bid Is An Offer Made By A Bidder In Addition Or As A Substitute To Its Original Bid Which May Be Included As Part Of Its Original Bid Or Submitted Separately Therewith For Purposes Of Bidding. A Bid With Options Is Considered An Alternative Bid Regardless Of Whether Said Bid Proposal Is Contained In A Single Envelope Or Submitted In Two (2) Or More Separate Bid Envelopes. 6. Award Will Be Made To The Lowest Calculated And Responsive Bid (lcrb) – The Bid Determined, After Post-qualification, As Complying To The Eligibility And Bid Requirements. 7. Breaking Of Ties. A Non-discretionary Method Of Breaking Ties Will Be Used, I.e. Tossing Of Coin (for Two Bidders) Or Draw Lots (for Three Or More Bidders). 8. The City Of Bayawan Reserves The Right Not To Award Any Contract To A Bidder Having A Pending And Overdue Delivery Obligation To The City And Defaulted The Prescribed Delivery Period In Previous Award/s From The City Of Bayawan. 9. The Prescribed Delivery Period Is Within Thirty (30) Calendar Days, Unless Explicitly Indicated In The Proposal. Extension Of Delivery Period, If Granted, Shall In No Case Exceed The Original Delivery Term. Unless Otherwise Stated, The Default Place Of Delivery Is F.o.b. Bayawan City Warehouse, Cabcabon, Bayawan City. 10. Supplier/s Must Deliver The Items Awarded Within The Period Specified In The Purchase Order. Purchase Order Issued Shall Automatically Be Cancelled If No Delivery Is Made After Thirty (30) Calendar Days After Receipt Thereof, Without Prejudice To Legal Courses Of Action (e.g. Imposition Of Liquidated Damages, Suspension And Blacklisting) Provided In Republic Act 9184 And Its Irr. The Rescinded Contract May Be Re-awarded To The Next Lowest Calculated And Responsive Bidder. 11. Warranty. To Assure That Manufacturing Defects Are Corrected By Supplier, A Warranty Security Shall Be Required For A Minimum Of Three (3) Months For Expendable Supplies, And One (1) Year In The Case Of Non-expendable Supplies. The Obligation Shall Be Covered By Retention Money(1%) Of The Contract Price And Shall Be Released Only After The Lapse Of The Warranty Period Or In The Case Of Expendable Supplies, After Consumption Thereof: Provided, However, That The Supplies Delivered Are Free From Patent And Latent Defects And All The Conditions Imposed Under The Contract Have Been Fully Met. Rfq Proposal Form Rfq Reference: Svp 25-b-0182(re-bid) Total Abc: Php 296,341.00 After Having Carefully Read And Accepted The Terms And Conditions, I/ We Submit Our Quotation For The Item(s) As Follows: Item No. Description (qty) Unit Of Issue Approved Budget For The Contract (totalabc Per Line Item) Offer Compliance With Technical Specifications (please Check) Remarks (indicate The Price, Brand/model And Specifications. Attach Brochure If Available.) Yes No Unit Cost Total Cost Brand/model And Technical Specifications Purpose: Supply And Delivery Of Other Supplies And Materials For Sluaghter Operation Use. I Lot I Carpentry Tools And Supplies 1 Locker Cabinet, Metal, 24 Compartments With Dual Lock (camlock And Padlock Ready), 185x90x40 Cm, With Ventilation, Gray 1 Unit 23,000.00 [ ] [ ] 2 Tie Wire, #18 20 Kilo 80.00 [ ] [ ] 3 Cutting Disc, 100mm Dia, For Metal 5 Piece 105.00 [ ] [ ] 4 Cutting Disc, Concrete, 4 Inches (heavy Duty) 2 Piece 380.00 [ ] [ ] Ii Lot I Electrical Supplies And Materials [ ] [ ] 5 Electric Extension Reel, Cord Length: 25-50m , Cord Size: #16, 4 Sockets, Power Switch, Thermal Cut-out Protection, Winding Knob, 220v 1 Roll 3800.00 [ ] [ ] Iii Lot I Farm/garden Tools And Accessories 6 Loop Handle Brushcutter, Recoil Starter, 34-35.8 Cu.cm. (cc), Unleaded/gasoline, 0.5-1.5l, Outdoor Operation Mode, Single Cylinder, 4-stroke,12.kw(1.6hp), 7000rpm, At Least 1.6-1.9 N.m, 5,500rpm, 1cylinder, Single Exhaust Pipe, Rotary Type(oil Mist), Ohc, At Least 39.0x30.0mm, Solid Drive Shaft, Semi-dry Type, 1885x325x250, 0.1 Liter Oil Capacity, 6-8 Kgs., Oil Mist Lubrication System, Blade Safety Frame Guard, Anti Vibration, 2 Blade Guards, 4 Blade Tooth, With Googles And Harness, Loop Handle Type, 6 Months To 1 Year Warranty, Lgu Bayawan City As Registered Owner O. R. 1 Unit 18,000.00 [ ] [ ] 7 Garden Hose, With Ply, .5" Dia., 90mtr. 1 Roll 3,150.00 [ ] [ ] 8 Empty Sack, New, 50kg Capacity, White 625 Piece 20.00 [ ] [ ] Iv Lot I Oxygen/lpg Supplies And Materials 9 Lpg Tank With Content, 50kg 10 Tank 11,500.00 [ ] [ ] 10 Lpg Hose, Lpg Hose 10 Meter 120.00 [ ] [ ] 11 Lpg Regulator, Lpg Regulator,with Gauge 4 Piece 1,900.00 [ ] [ ] V Lot I Other Supplies And Materials 12 Banyera, 70 Liters Capacity, Color Blue, Rubberized Heavy Duty Banyera Made Of Plastic Material Hdpe Colour, Oval Fish Crate 10 Unit 700.00 [ ] [ ] 13 "empty Drum, Polyethylene Material 200 Liter Capacity Height: 93mm Length: 580mm Heavy Duty" 3 Piece 2,500.00 [ ] [ ] 14 Wheel Barrow, Deep Type, 13" X 3" Solid Tire, Heavy Duty 2 Piece 4,000.00 [ ] [ ] 15 Knife Sharpener, (bairan) Good Quality 11 Piece 200.00 [ ] [ ] 16 Padlock, 20mm, Heavy Duty 10 Piece 200.00 [ ] [ ] 17 Padlock, 40mm, Heavy Duty 10 Piece 300.00 [ ] [ ] 18 Honing Steel, 12" 6 Piece 460.00 [ ] [ ] 19 Padlock, 60mm, Heavy Duty 4 Piece 500.00 [ ] [ ] 20 Wheel Barrow, Shallow 3 Unit 2,835.00 [ ] [ ] 21 Weighing Scale, Hanging Hook,200 Kg Capacity,steel, Heavy Duty 1 Piece 1,500.00 [ ] [ ] 22 Animal Marking Stick, Screw Type 27 Piece 2,700.00 [ ] [ ] Vi Lot I Plumbing Supplies 23 Hose Clip/clamp, Stainless Steel, 20mm - 32mm, Heavy Duty 10 Piece 98.00 [ ] [ ] 24 Hose Clip, 5/8", Hose Clip, 5/8" 20 Piece 18.00 [ ] [ ] 25 Ball Valve, 15mm Dia Brass/bronze 5 Piece 250.00 [ ] [ ] 26 Ball Valve, 1/2 X 1/2 With Lock Wing 5 Piece 220.00 [ ] [ ] 27 Gi Coupling, 15mm Dia Sched. 40 10 Piece 26.00 [ ] [ ] 28 Nipple, G.i., 15mm Dia X .35m, Sched. 40 8 Piece 77.00 [ ] [ ] 29 Pressure Washer Hose, Sewer Drain Water Cleaning Hose, With Multi-functional Jet Nozzles, 30m 2 Set 3,500.00 [ ] [ ] 30 Pressure Hose, Good Quality, (30m/roll) 1 Roll 1,350.00 [ ] [ ] 31 Garden Hose, 1 Inch Diameterx100 Meter Long/roll With Ply 1 Roll 3,800.00 [ ] [ ] 32 Stainless Steel Pipe, 40mm X 6.0m 2 Length 4,900.00 [ ] [ ] 33 Stainless Steel Pipe, 50mm Dia X 6.0m 2 Length 7,000.00 [ ] [ ] Vii Lot I Steelwork Supplies And Devices 34 Electric Drill, 1800w, 220 Vac, With Complete Accessories 1 Piece 5,600.00 [ ] [ ] 35 "portable Welding Machine , ► Power Voltage (v): 220 V ►rated Input Capacitance: 7.4 ►input Voltage Frequency (hz): 60 Hz ►iso 9001 Certified With Ac Plug, Electrode Holder And Welding Cable, Earth Clamp And Cable, Welding Mask With Handle, Steel Brush, Complete Package." 1 Unit 9,000.00 [ ] [ ] 36 Welding Rod/electrode, 3.2 X 350mm Stainless 308-r E30316 3 Kilo 475.00 [ ] [ ] 37 Welding Rod, E 3016 5 Kilo 100.00 [ ] [ ] 38 "angle Grinder, Rated Power Input: At Least 900 Wattage No Load Speed: At Least 11000rpm Power Output: 450w Grinding Spindle Thread: M10 Disc Diameter: 100mm (4"") Tool Dimensions (approx): Length - 250mm, Width-73mm, Height-100mm Weight 1.9 Kg Switch 2-way Surface Grinding (roughing) Vibration Emission Value Ah 7.5 M/s² Uncertainty K 1.5 M/s² Sanding With Sanding Sheet Vibration Emission Value Ah 7.5 M/s² Uncertainty K 1.5 M/s² 1 Year Parts & Service" 1 Unit 5,000.00 [ ] [ ] ***nothing Follows*** (supplier Must Provide Complete Data For The Information Required Below) Delivery Period Warranty Place Of Delivery Signature Over Printed Name Designation Name Of Business Address Telephone/mobile/fax No Email Address