Tenders of Offizielle Bezeichnung

Contract notice – general guideline, standard rule Open procedure (construction work) Frankfurt – new Rebstockbad building The new Rebstockbad building in Frankfurt am Main is the most important swimming pool project within the framework of the Frankfurt 2025 swimming pool concept and, in addition to its function of providing regional services to the city of Frankfurt am Main, has the aim of creating a supra-regional appeal in the Rhine-Main area. The Rebstockbad is to become a showcase project in the swimming pool landscape. The wide-ranging needs when visiting a swimming pool – from sporting aspects to the opportunity to spend free time with family and friends to health and wellness-oriented offers – are to be reflected in the profile of the new Rebstockbad. In addition to the external impact of the building, the primary project goal is to make the pool attractive for future users. Other key project goals are the energy and resource-saving, ecological and economical construction and operation of the Rebstockbad. This is to be ensured by an efficient, durable, sustainable, low-maintenance and easy-care construction. If you have any questions regarding the e-tendering platform Subreport Elvis, please contact: Stefan Ehl, Tel.: +49 (0) 221/9 85 78-58, Fax: +49 (0) 221/9 85 78-66, E-mail: stefan.ehl@subreport.de, Internet: www.subreport.de 9. For bidder communication (questions about the list of services or bidder questions of any kind), only the communication function via the tendering platform is to be used. In this case Subreport Elvis. Ve 500,010 Lv Gala1 Civil engineering work, earthworks, asphalt construction work - Earthworks: Approx. 10,000m³ - Pipelines Rw Pp Dn 100 to Dn 500: Approx. 950 m - Drainage lines: Approx. 250 m - Shaft structures Rw Dn 1000 - Dn 1500: Approx. 27 units - Rw treatment plants sedimentation: Approx. 3 units - Gravel trenches / gravel cisterns: Approx. 2,000 m³ - Bituminous base layer incl. Fss, Sts: Approx. 1,500 m²

Contract notice – General guideline, standard regulation Open procedure (construction work) Municipality of Büttelborn, New rescue centre Büttelborn Gates Municipality of Büttelborn, New rescue centre Büttelborn Rough dimensions: 9 pieces Outward folding "fire brigade" gates With glass filling

Contract notice - General guideline, standard regulation Open procedure (services) Waste disposal at all locations of the Lahn-Dill-Kliniken GmbH Waste disposal of grease trap contents Disposal of grease trap contents (ASN 02 02 04 Sludge from the company's own waste water treatment ... Multi-waste disposal at all locations of the Lahn-Dill-Kliniken GmbH Waste disposal of grease trap contents Disposal of grease trap contents (ASN 02 02 04 Sludge from the company's own waste water treatment) Paper and cardboard Disposal of paper and cardboard (ASN 15 01 01 Packaging made of paper and cardboard; material flow contains ASN 20 01 01) Scrap metal, mixed Disposal of mixed scrap metal (ASN 17 04 07 Mixed metals; material flow contains ASN 20 01 40 + 15 01 04) Electronic waste Disposal of electronic waste (ASN 16 02 Wastes from electrical and electronic equipment; material stream contains Asn 20 01 21* + Asn 20 01 23* + Asn 17 04) Body parts, organs Disposal of body parts, organs (asn 18 01 02 Body parts and organs, including blood bags and blood reserves (except 18 10 03)) Together with lots 6, 8 and 9 Infectious hospital waste Disposal of infectious hospital waste (asn 18 01 03* Wastes whose collection and disposal are subject to special requirements from a infection prevention perspective) Together with lots 5, 8 and 9 Hospital-spec. Residual waste disposal Hospital-specific residual waste (asn 18 01 04 Wastes for the collection and disposal of which no special requirements are made from an infection prevention perspective (e.g. wound and plaster dressings, laundry, disposable clothing, diapers)) Cytostatic waste Disposal of cytostatic waste (asn 18 01 08* Cytotoxic and cytostatic drugs) Together with lots 5, 6 and 9 Drugs Disposal of drugs (asn 18 01 09 Drugs with the exception of those falling under 18 01 08) Together with lots 5, 6 and 8 Files for destruction Disposal of files for destruction (asn 20 01 01 Paper and cardboard; BDSG specifications and DIN standard 66399 must be observed) Leftover food (piece goods) Disposal of leftover food / canteen waste - piece goods (asn 20 01 08 Biodegradable kitchen and canteen waste) Together with lot 13 Food waste (tankware) Disposal of food waste / canteen waste - wet waste disposal tank (asn 20 01 08 Biodegradable kitchen and canteen waste) Used fat Disposal of used fat (asn 20 01 25 Cooking oils and fats) Together with lot 11 Bulky waste Disposal of bulky waste (asn 20 03 07 Bulky waste) Green waste Disposal of green waste (asn 20 02 01 Grass clippings, green waste, landscaping material)

Contract notice – General guideline, standard regulation Open procedure (construction work) Bau-085850_cn_zfe_ Lüftung Air conditioning systems (din 18 379); Bau-085850_cn_zfe_ Lüftung Ventilation systems 2 pieces partial air conditioning units 1 piece full air conditioning systems 3 double systems 6 exhaust air systems. Duct heaters/coolers 48 pieces Duct/molded duct, galvanized 1,115m² Duct/molded duct, stainless steel 240 m² Spiral seam duct 6,500m Volume flow controller Var. 124 pieces Volume flow controller Const. 136 pcs Motorized fire dampers 264 pcs Swirl diffusers 90 pcs Slotted rails 17m grilles Ventilation towers 14 pcs Air conditioning cabinets 1 pc Recirculating air cooling units 10 pcs Use of fairly traded products Ecologically sustainable products Innovatively oriented products and services

Contract notice - General guideline, standard regulation Open procedure (construction work) Steinachtalschule, Abtsteinach - General renovation with new building - Facade construction work - suspended facade (t3) Suspended, ventilated facade, wall areas 1,040.00 m² - Metal substructure on ... Mehrsteinachtalschule, Abtsteinach - General renovation with new building - Facade construction work - suspended facade (t3) Suspended, ventilated facade, wall areas 1,040.00 m² - Metal substructure on wall substrate made of reinforced concrete - Facade thermal insulation, mineral wool 0.032 W/(m*k), 200mm - Facade cladding, fiber cement facade panels Steinachtalschule, Abtsteinach - General renovation with new building - Facade construction work - suspended facade (t3) Suspended, ventilated facade, wall areas 1,040.00 m² - Metal substructure on wall substrate Made of reinforced concrete - facade thermal insulation, mineral wool 0.032 W/(m*k), 200mm - facade cladding, fiber cement facade panels

Contract notice – general guideline, standard rule, open procedure (construction work) plastering, painting and drywall work plastering, painting and drywall work plastering, painting and drywall work plastering, painting and drywall work in the course of the new construction of 2 apartment buildings ... plastering, painting and drywall work plastering, painting and drywall work plastering, painting and drywall work plastering, painting and drywall work in the course of the new construction of 2 apartment buildings in Maintal, Dörnigheim. Scope of services: -Construction site equipment including rolling scaffolding and trestle scaffolding -Protective covers Inside: Plastering work -7000m² primer for interior wall masonry including reinforcement and profiles -60m² bonding bridge for interior concrete wall -2500m² gypsum plaster inside 10mm including allowances -4500m² gypsum plaster inside 15mm including allowances -400m² lime cement plaster inside 10mm including allowances Painting work -160m² floor coating pure resin -12,000m² interior wall painting on wallpaper -5000m² ceiling painting on painter's fleece Wallpapering work -12,000m² paper wall covering including base coat -5000m² painter's fleece ceiling including base coat including allowances Drywall work -1200m² partition walls single stud frame 125mm including allowances -650m² Partition walls, single stud frame 100mm incl. allowances -600m² Partition wall, double stud frame 250-470mm incl. allowances -500m² Facing panels incl. allowances 250-320mm -160m² Acoustic ceiling system outside: Plastering work -2600m² Primer for outside wall -2600m² Top and bottom plaster made of lime cement lightweight plaster including reinforcement and primer -450m² WDVs base made of EPS complete system incl. plastering -450m² WDVs outside wall made of MW complete system incl. plastering -160m² WDVs roof underside made of EPS complete system incl. plastering Painting work -220m² Sealing slurry for arcades and loggias -2900m² Painting outside wall -190m² Painting base -700m² Painting underside of ceiling

Contract notice – general guideline, standard regulation Open procedure (supplies) Lorawan and sensors for the cities of Bürstadt and Lampertheim Construction and operation of a comprehensive Lorawan infrastructure as a service (IAAS) and delivery and installation of sensors A ... MoreLorawan and sensors for the cities of Bürstadt and Lampertheim Construction and operation of a comprehensive Lorawan infrastructure as a service (IAAS) and delivery and installation of sensors Construction and operation of a comprehensive Lorawan infrastructure as a service (IAAS) in the municipalities of Bürstadt and Lampertheim As infrastructure, the contractor is to build a comprehensive Lorawan in the cities of Bürstadt and Lampertheim and operate it for five years as Infrastructure As A Service (IAAS). Delivery and installation of sensors As a first step, the cities of Bürstadt and Lampertheim want to implement four use cases in the urban area as soon as possible. The delivery and installation of the Lorawan-capable sensors required for this is part of Lot 2 of this tender. The integration of the sensors to be supplied is part of Lot 1 of this tender.

Contract notice – general guidelines, standard rules, open procedure (deliveries) City of Riedstadt, Volunteer Fire Department Riedstadt-Wolfkehlen Purchase of a rescue and firefighting group vehicle HLF 20 chassis For the Volunteer Fire Department Riedstadt-Wolfskehlen, a replacement purchase is to be carried out in the form of a subsidized rescue and firefighting group vehicle HLF 20 in accordance with DIN/EN 1846 and DIN 14530-27. The tender is divided into 3 lots, here: chassis for a fire service technical structure HLF 20. The load for the vehicle is to be provided by the client. Fire service technical structure For the Riedstadt-Wolfskehlen volunteer fire service, a replacement purchase is to be made in the form of a subsidized emergency firefighting group vehicle Hlf 20 in accordance with DIN/EN 1846 and DIN 14530-27. The tender is divided into 3 lots, here: Fire service technical vehicle structure for an Hlf 20. The load for the vehicle is provided by the client. Pressure proportioning system For the Riedstadt-Wolfskehlen volunteer fire service, a replacement purchase is to be made in the form of a subsidized emergency firefighting group vehicle Hlf 20 in accordance with DIN/EN 1846 and DIN 14530-27. The tender is divided into 3 lots, here: Pressure proportioning system with foam tank. The load for the vehicle is provided by the client.

Contract notice - general guideline, standard regulation open procedure (construction work) heat supply heating systems and central water heating systems (DIN 18 380); heat supply title 1 - heating work 1 piece system separation with district heating transfer station 1 piece heating distribution ... additional heat supply heating systems and central water heating systems (DIN 18 380); Heat supply Title 1 - Heating work 1 piece system separation with district heating transfer station 1 piece 8-way heating distributor with distributor structure 1 piece pressure maintenance station 166 pieces section radiators delivery and installation 166 pieces thermostatic valve 2-pipe system 80m² ceiling heating 76 pieces shut-off valve / ball valve, branch control fittings 39 pieces gate valves, flaps, control fittings with flange connection 2 pieces feed pump with flange connection 4 pieces connection to existing substation heating distributor, neighboring building 1600 m laying of pipes heating stainless steel / non-drinking water surface mounting, above skirting board

Contract notice – general guidelines, standard rules, restricted procedure (services) Outsourcing of the data center at the DRV Hessen The German Pension Insurance Fund in Hessen intends to rent space for IT hardware (server room/cage or lockable racks) in a colocation data center in the Rhine-Main area. Outsourcing of the data center at the DRV Hessen The German Pension Insurance Fund in Hessen intends to rent space for IT hardware (server room/cage or lockable racks) in a colocation data center in the Rhine-Main area. Outsourcing of the data center at the DRV Hessen Allocation of the parking spaces The following parking spaces are to be made available at one location in separate fire compartments. The installation must take place in a separate cage area or room that is only accessible to the client. Location A: - Server 1 area, own fire compartment - Server 2 area, own fire compartment - Backup 1 area, own fire compartment Location B, geo-redundant to location A (distance 200 km, but at least 100 km) - Backup 2 area, own fire compartment Total connected load The client will probably require a total connected load of around 173 kW for the IT systems for the start-up phase. The contractor must provide a 50% connected load per area as an expansion reserve. The connected load is divided between the productive operation of the "server" and the "backup" as follows. - Productive operation server 1: 82.5 kW - Productive operation server 2: 82.5 kW - Backup 1: 4 kW - Backup 2: 4 kW Floor space / cage As a minimum requirement, the server for productive operation is set up in a cage within the total IT area with 19-inch racks (47 U, minimum dimensions 220 x 80 x 120 (height x width x depth in cm). A work area of 1.20 m must be provided in front of and behind the racks. The setup for backup 1 or 2 is to be priced both as a cage variant and for installation in a lockable colo rack (in an "open-colo area"). The interior of a cage must not be visible from the outside (privacy protection). Number of racks Currently, a total of approx. 108 U (height units) are installed due to servers, network, firewall and backup systems, which are independent of The technically possible performance capacity of a single rack must be divided up into the individual areas at least as follows: - Server area 1: approx. 50 U, number of racks: 3 - Server area 2: approx. 50 U, number of racks: 3 - Backup area 1: approx. 12 U, number of racks: 1 - Backup area 2: approx. 12 U, number of racks: 1 The racks are to be provided by the contractor as lockable 19-inch racks with 47 U with the minimum dimensions 220 x 80 x 120 (height x width x depth in cm). As an expansion reserve, the contractor must provide space for 1 rack per server area. No reserve is to be kept for the Backup 1 and 2 areas.