Tenders of Offizielle Bezeichnung

Contract notice – general guideline, standard regulation Open procedure (services) Procurement of support and consulting services for SAP standardization and automation based on the software product Streamworks The aim of this tender is to conclude a framework agreement for the procurement of support and consulting services for SAP standardization and automation based on the software product Streamworks. Procurement of support and consulting services for SAP standardization and automation based on the software product Streamworks The main focus for SAP infrastructure projects during the term of the framework agreement is - the migration of the central systems to the S4/HANA world of SAP. Due to the state’s requirements for SAP systems, an on-premise solution will continue to be operated in the HZD’s Rz. - Other current projects will only be listed here in bullet points. - Introduction and expansion of SAP Middleware (SAP-PO) - Expansion of the use of Solution Manager (ALM) - Introduction of various tools to optimize operational processes (Focused Run, Ansible, Bluecopy) - Introduction and expansion of hybrid solutions with cloud connection to the current on-premise solutions The relevant project tasks require external support and advice. Against this background, the contractor is expected to be familiar with the working methods in an SAP-certified CCOE (basic certification), compliance-compliant working methods (including IDW PS 330), process-supported incident management, change management and problem management in accordance with ITIL V3 and Prince2 as a process model for project management, as well as the respective processes, and to be practiced by the people he employs. For the services advertised, only one person should be offered for each role (R 1.1 and R 1.2) (so a maximum of two people in total). If appropriately qualified, the same person can be specified for two roles. Description of the service: In detail, it can be assumed that services are to be provided for the following areas of responsibility: - Role 1.1: Further development of the standardization and automation of process flows, in particular using Streamworks - Role 1.2: Operation and maintenance of Streamworks and associated components The advertised service is divided into two profiles. In order to successfully solve the tasks named below, for each area of responsibility, many years of practical experience in the enterprise environment in the tasks named is a prerequisite. Tasks (role R1.1): By taking on this area of responsibility, the independent and uninstructed completion of the following tasks is planned: - standardization and automation of repetitive processes in SAP Basis operations, in particular payroll accounting, in particular using Streamworks This task is typically divided into the following individual steps: - Identify processes worthy of standardization and automation - Create a solution concept for this - Implement the solution concept using tools (preferably with Streamworks or SAP's own Tools) - Implementation in own programming (batch scripts, Perl, ...) - Quality assurance - Documentation - Creating and revising higher-level concepts for standardization and automation in SAP-basis operations - Maintenance and further development of automation areas already implemented with the help of Streamworks (particularly in payroll accounting) - Knowledge transfer to employees of the HZD and the HCC Qualification: College or university degree in IT or an IT-related subject (e.g. computer science, business informatics, natural sciences, mathematics) or comparable knowledge and skills acquired in practice. At least 36 months of experience for each of the following required qualifications: - Standardization and automation of repetitive processes in SAP Basis operations - identification of processes worthy of standardization and automation - Creation of solution concepts - Creation and revision of higher-level concepts for standardization and automation in SAP Basis operations At least 60 months of experience for each of the following required qualifications: - Tool-supported implementation of automation projects with Streamworks and SAP's own tools - Maintenance and further development of processes that are already automated with Streamworks - Implementation through in-house programming (batch scripts, Perl) At least 12 months of experience for each of the following required skills: - Collaboration in higher-level projects and committees - Communication and documentation of decisions and processes - Application of processes for knowledge transfer Tasks Role R1.2: Taking on this area of responsibility means completing the following tasks independently and without instructions Intended: - Operation and maintenance of Streamworks and associated components This task is typically divided into the following individual steps: - Activities related to the Streamworks server, in particular the installation of release upgrades and updates - Operation of the Streamworks GUI, in particular the installation of release upgrades and updates, as well as configurations - Operation and setup of additional functionalities in Streamworks, primarily reporting and the self-service portal, including configuration and certificate import - Operation of the Streamworks agents, in particular their installation, upgrades, configuration and certificate import - Operation of the interfaces required for Streamworks, in particular their configuration and upgrades - Support in the event of faults - Knowledge transfer to employees of the HZD and the HCC The qualification requirements can be found in the service description. All other requirements for the provision of services and the description of the work environment can also be found in the service description (file "service description").

Contract notice - General guideline, standard regulation Open procedure (services) Award of the Ried line bundle The Rhein Neckar Transport Association GmbH as the responsible organisation in the Bergstrasse district as the competent authority within the meaning of Regulation 1370/2007 in accordance with Article 5, Paragraph 1 of Regulation 1370/... Multi-award of the Ried line bundle The Rhein Neckar Transport Association GmbH as the responsible organisation in the Bergstrasse district as the competent authority within the meaning of Regulation 1370/2007 in accordance with Article 5, Paragraph 1 of Regulation 1370/07 in accordance with Section 119 of the GWB and the City of Worms as the competent authority within the meaning of Regulation 1370/2007 in accordance with Article 5, Paragraph 1 of Regulation 1370/2007 in accordance with Part 4 of the GWB intend to award a public service contract within the meaning of Regulation 1370/2007 with an expected term until the timetable change in December 2035. The following regulations on collective bargaining and social standards are part of the adequate transport service in order to ensure operational quality: Due to the labor market situation in the Rhine-Neckar metropolitan region and in the Bergstrasse district, the future operator is obliged to pay its employees at least the remuneration set out in the following collective agreements declared as representative in accordance with the Hvtg in order to ensure that the driving personnel have sufficient qualifications when performing the service, and to guarantee the working conditions set out in these collective agreements: - General collective agreement for commercial employees in private passenger transport by bus in Hesse, valid from April 1, 2019 (m-tv) - Wage collective agreement for employees in private. Passenger transport by bus in Hesse valid from April 1st, 2019 (e-tv) The special regulations for metropolitan area transport in § 7 A II. M-tv, § 3 E-tv and the general appendix to § 3 E-tv apply. Further specifications can be found at http://www.had.de/vergabestellen-tarifvertraege.html. This obligation applies dynamically for the entire term of the new contract period, i.e. always with reference to the adjustments to the collective agreements that will be made in the future. If subcontractors are used, they must also guarantee compliance with these obligations. In addition to the social standards to be guaranteed by the collective agreement, the following conditions apply to driving time interruptions and breaks for all drivers deployed: Driving time interruptions and breaks that are not considered working time under the collective agreement may not exceed 60 minutes per shift. If the driving time interruptions and breaks exceed this limit, the times of the work interruptions exceeding the 60-minute limit are to be counted as working time. A one-off work interruption per shift of at least 2 hours that begins and ends at the employee's place of residence (district) or at a company location with adequate social spaces counts as genuine, non-compensated free time in the sense of a split shift. The provision of social spaces is not relevant in this context if the work interruption lasts longer than 4 hours. The following regulations on the takeover of personnel are also part of the adequate transport service in order to ensure the quality of operation: As part of their offer, the bidders undertake to offer an employment contract to those drivers who are employed by the old operator of the route bundle for at least 70% of the regular working hours during the award process and who can show a valid employment contract with the old operator at the time of commissioning. The new employment contract is to be concluded for an indefinite period and without a probationary period. The offer of employment must be based on the collective agreement and company agreement conditions applicable to the rest of the workforce in the concessionaire's company. If the collective agreement in force in the acquiring company makes the amount of pay and the number of vacation days dependent on the length of service, the new employment contract must stipulate that the length of service with the old operator is to be counted as length of service in the acquiring company for the purposes of pay classification and vacation granting. Regular service in accordance with Section 42 Pbefg Line 640: Bensheim - Einhausen - Bensheim Line 641: Bensheim - Lorsch - Bensheim Line 642: Biblis - Wattenheim - Nordheim - Hofheim Line 643: Heppenheim - Lorsch - Einhausen - Bürstadt Line 644/644a: Worms - Lampertheim - Hüttenfeld - Viernheim / Heppenheim Line 645: Bensheim - Einhausen - Groß-rohrheim - Biblis Line 646: Worms - Bürstadt - Einhausen - Lorsch - Bensheim (early/late service) Line 647: Bensheim - Groß-rohrheim - Biblis - Bobstadt - Hofheim (only during school hours) Line 648: Groß-rohrheim - Biblis - Hofheim - Bürstadt - Lampertheim (only during school hours) Line 649: Lorsch - Hüttenfeld Line 651: Bürstadt - Riedrode - Gärtnersiedlung (only during school hours) Line 655: Hofheim - Bürstadt - Lampertheim

Contract notice - General guideline, standard regulation Open procedure (construction work) Open-air and traffic facilities Approx. 14 points of suspected explosive ordnance excavation Approx. 4,000m2 asphalt pavement removal Approx. 6,800m2 concrete or natural stone paving/slabs and track construction paving removal ... Multi-open-air and traffic facilities Approx. 14 points of suspected explosive ordnance excavation Approx. 4,000m2 asphalt pavement removal Approx. 6,800m2 concrete or natural stone paving/slabs and track construction paving removal Approx. 12,000m3 earth excavation Approx. 2,000m3 subsoil improvement 3 rainwater cisterns made of precast concrete Approx. 240m drainage channels Approx. 110m drainage channels 1 automatic bollard system 34 mist nozzles with 1 pump chamber Approx. 2,450m2 asphalt surface Incl. base layers approx. 5,500m2 natural stone paving made of granite and basalt, unbound, incl. base layers approx. 800m2 natural stone paving made of granite, bound, incl. base layers approx. 1,000m2 concrete paving/slabs, unbound, incl. base layers approx. 920m rail chamber stones made of concrete approx. 950m curb systems made of granite approx. 450m edging made of steel edges, flush with the surface approx. 190m tree edging made of granite, width 80cm approx. 220m steel edging, height W 35cm 74pcs. Large tree plantings, width 140cm, height 13m Approx. 3,250m² vegetation areas, currently rolled turf Open-air and traffic facilities Approx. 14 points of suspected explosive ordnance excavated Approx. 4,000m2 asphalt pavement removed Approx. 6,800m2 concrete or natural stone paving/slabs and track construction paving removed Approx. 12,000m3 earth excavated Approx. 2,000m3 subsoil improvement 3 rainwater cisterns made of prefabricated concrete Approx. 240m drainage channels Approx. 110m drainage channels 1 automatic bollard system 34 mist nozzles with 1 pump chamber Approx. 2,450m2 asphalt surface including base layers Approx. 5,500m2 natural stone paving granite and basalt, unbound, including base layers Approx. 800m2 Natural stone paving granite, bound, including base layers Approx. 1,000m2 concrete paving stones/slabs, unbound, including base layers Approx. 920m rail chamber stones made of concrete Approx. 950m curb systems made of granite Approx. 450m edging steel edges, flush with the surface Approx. 190m tree edging made of granite, width 80cm Approx. 220m steel edging, height 35cm 74 large tree plantings Stu W. 140cm, height W. 13m Approx. 3,250m² vegetation areas, Zt rolled turf

Concession notice - standard regulation (services) Food supply Holzhausenschule and Adornogymnaisum Food supply Holzhausenschule and Adornogymnaisum within the framework of a service concession (see service description) Food supply Ho ... Multi-meal supply Holzhausenschule and Adornogymnaisum Food supply Holzhausenschule and Adornogymnaisum within the framework of a service concession (see service description) Food supply Holzhausenschule and Adornogymnaisum Food supply Adorno Gymnasium and Holzhausenschule - mixed kitchen

Contract notice - General guideline, standard regulation Open procedure (construction work) Asg/91/203 Securing old landfill, Section 1, Part 2.2 Construction site setup, dust control Delivery of 200,000 t of soil material (load class Dk-i) Profile-appropriate installation of the soil material A ... Mehrasg/91/203 Securing old landfill, Section 1, Part 2.2 Construction site setup, dust control Delivery of 200,000 t of soil material (load class Dk-i) Profile-appropriate installation of the soil material at the old landfill in Eisert Asg/91/203 Securing old landfill, Section 1, Part 2.2 Construction site setup, dust control Delivery of 200,000 t of soil material (load class Dk-i) Profile-appropriate installation of the soil material at the old landfill in Eisert

Contract notice – general guideline, standard regulation negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Object planning for a building for the renovation of the administration building at the Comenius School, Herborn Object planning for a building for the renovation of the administration building at the Comenius School, Herborn Object planning ... Multi-object planning for a building for the renovation of the administration building at the Comenius School, Herborn Object planning for a building for the renovation of the administration building at the Comenius School, Herborn Object planning services for buildings in accordance with Part 3, Section 1 HOAI, LPH 1-8 for the renovation of the administration building at the Comenius School, Herborn. The district committee of the Lahn-Dill district, represented by the building department - schools, is the sponsor of schools according to the Hessian school law. In this capacity, it is planning the renovation of the administration building at the Comenius School in Herborn with a flat roof renovation. The Comenius School in Herborn is a middle school with a focus on career orientation. There are currently around 720 pupils being taught by 61 teachers in 35 classes. 12 career fields are offered as part of the vocational training. The administration building of the Comenius School is a 2-storey structure with a ground floor and an upper floor. On the ground floor there is the cafeteria and various workshops and teaching rooms for the areas of art, clay, wood and 3D printing. On the upper floor is the administration and an auditorium; the reinforced concrete break hall is connected to the existing building. The area to be renovated is around 1,650m² gross floor area for the administration and around 525m² for the break hall. The renovation in question is intended to implement the following measures in the administration building and the break hall: - renewal of the suspended acoustic ceilings, - replacement of existing external windows and doors, as well as internal doors as required (some of these have already been replaced), - floor covering, painting and wallpapering work in the building, - insulation of the facade, - flat roof renovation including thermal insulation, - renovation of the reinforced concrete break hall. Furthermore, as part of the renovation, an elevator is to be installed to provide barrier-free access to the cafeteria and the building services are to be upgraded. If necessary, further measures can be added as required during implementation. These must be agreed with the contracting authority in advance. The existing floor plans of the administration building and a list of the rooms are attached to this document for information and with reference to Section 7 Vgv.

Contract notice - general guideline, standard regulation Open procedure (services) 63 schools in the Darmstadt-Dieburg district - school catering Information about the planned framework agreement and the process of the planned mini-competitions instead of the previous individual or lot-based awards for school catering Now a framework agreement with several contractual partners The framework agreement is concluded for 63 schools to which contracts for school catering are to be awarded between 2025 and 2029, and exclusively to framework agreement partners. The framework agreement stipulates that interested companies only have to submit documents for the suitability test in the first step. All suitable bidders become framework agreement partners and are invited to submit offers in mini-competitions during the term. This means that the documents relevant for the evaluation (list of services and other information relevant to the offer according to the evaluation form) only have to be submitted in the second step. There is no obligation to submit an offer. The framework agreement partners decide for each mini-competition whether they want to participate under the specified conditions of the individual order. 63 schools in the Darmstadt-Dieburg district - school catering Production, delivery and administration services for lunch and personnel services for serving meals at 63 schools in the Darmstadt-Dieburg district within a framework agreement with several contractual partners. Placing orders via mini-competitions

Contract notice – General guideline, standard rule Open procedure (supplies) Mobile flood protection system Supply of a mobile flood protection system (hwss) Mobile flood protection system Supply of a mobile flood protection system (hwss) In accordance with the specifications ... Multi-mobile flood protection system Supply of a mobile flood protection system (hwss) Mobile flood protection system Supply of a mobile flood protection system (hwss) In accordance with the specifications.

Contract notice – Sector Directive, standard regulation Negotiated procedure with prior publication of a call for competition/negotiated procedure (construction work) New construction Uw Deponiestrasse Project description Substation Deponiestrasse SW Netz intends to build a new substation in the Deponiestrasse area in Wiesbaden. The property has a total size of 2,648 m2. Connection to the substation The 110 kV connection/looping of the Uw is via an overhead line approx. 300 m away. The underpass to two high-voltage systems is created on the mast, which are then relocated to the Uw. The municipal utilities are also responsible for the 20 kV connection. UW building The UW building consists of a total of five floors, each with approximately 680 m2. The Ug, Eg and 1st floor will be occupied by the electrical equipment of the substation (see list below), whereas a data center will be set up on the 2nd and 3rd floors. The 110 and 20 kV cables will be introduced into the building in the basement. The 20 kV cables will be led directly to the ground floor. This is where the 20 kV primary switchgear is located, which is dimensioned as an air-insulated double busbar system with a nominal current of 2,500 A and a short-circuit current of 25 Ka 3s. The 20 kV star-point switchgear will also be located on the ground floor. This is to be designed as an air-insulated single busbar system with a nominal current of 1,250 A and a short-circuit current of 20 Ka 1s. The 110 kV cables from the basement are led through two shafts into the 110 kV switchgear on the first floor. This is to be designed as a gas-insulated double busbar system with pure air as the insulation medium. It comprises 9 fields with the following division: transformer 1, feed-in network 1, feed-in 1, reserve field 1, cross-coupling, longitudinal separation, feed-in network 2, reserve field 2, transformer 2. The busbars and fields are to be designed for 2,500 A and a short-circuit current of 40 Ka 3s. The standardized protection and control cabinets are housed in a separate adjacent room. The list of rooms for the location of the remaining equipment can be found below. All technical components are to be designed in accordance with the current standards and regulations. The building must not exceed a maximum height of 20 m. The building's developer is Stadtwerke Wiesbaden Netz GmbH, which will also operate the substation, while the data center will be set up and operated by the company Witcom. Design of the electrical equipment - 110 kV switchgear in SF6-free design including control cabinets (9 fields with space reserve for two more) - Two 110/20 kV transformers with an output of 50/63 MVA (will be provided) - 20 kV primary switchgear // DSS system, air-insulated (23 fields) - 20 kV star-point switchgear // ESS system, air-insulated (11 fields) - Two 20 kV E-coils 52-520 A (dB) and 660 A (KB, 2h) (will be provided) - One earthing transformer up to 656 A (dB) and up to 660 A (KB, 2h) (will be provided) - Own use system AC and DC - 220 V DC battery system Division of the rooms in the transformer station - Basement O 2 pieces Transformer trays O Staircase (2x for SW Netz and Witcom) O Elevator for Witcom O Anteroom O Technical room O Goods elevator (2x for SW Netz and Witcom) O Battery room O Cable cellar (20 and 110 kV cables) O Cable shafts (2x 110 kV, 3x LWL, control cables, etc., 2x Witcom shaft) - Ground floor O 2 transformer rooms O Staircase (2x for SW Netz and Witcom) O Elevator for Witcom O Anteroom O Goods elevator (2x for SW Netz and Witcom) O Bma/ema room O 2 20 kV E-coil rooms O 1 earthing transformer room O 20 kV DDS primary and star point switchgear room O Cable shafts (2x 110 kV, 3x LWL, control cables, etc., 2x Witcom shaft) - First floor O 2 air spaces for the transformers O Staircase (2x for SW Netz and Witcom) O Elevator for Witcom O Anteroom O Sanitary rooms O 110 kV protection and control technology O AC auxiliary system room O DC auxiliary system room O 110 kV switchgear room O 2 Witcom shafts - Second and third floors: Witcom rooms (racks, technical rooms, etc.) Building including civil engineering The client will conduct a negotiated procedure with a prior competition for the award of construction services. Only the systems made available may be used to submit the application to participate. The client will check and evaluate the applications to participate received on time in terms of form and content. He will then ask the best-placed applicants (maximum of five) to submit a tender for the services advertised (start of the tender phase). The applicants/groups of applicants are selected for the tender and negotiation phase based on their suitability in terms of references and the qualifications of the project management in accordance with the competition. The invitation to submit a tender (aza) is issued secondarily. This describes the tasks to be performed in addition to the announcement, announces the evaluation criteria and the evaluation matrix, and provides further information on the subject matter of the contract, the contractual regulations and the service specifications. The incoming offers are checked for form and content. The client expressly reserves the right to enter into negotiations with selected bidders regarding their offers. If the client conducts negotiations regarding the offers, the remaining bidders are invited to the negotiation round and their offers are negotiated with them separately. Further negotiation rounds remain reserved. The offers are evaluated based on the evaluation criteria and the evaluation matrix announced there. Electrical systems The client is conducting a negotiated procedure with a prior competition for the award of construction services. Only the documents provided may be used to submit the application to participate. The client will check and evaluate the applications to participate received on time in terms of form and content. It will then invite the best-placed (maximum of five) applicants to submit an offer for the services advertised (start of the offer phase). The applicants/groups of applicants are selected for the offer and negotiation phase based on their suitability in terms of references and the qualifications of the project management in accordance with the competition for participation. The invitation to submit an offer (aza) is made secondarily. This describes the tasks to be performed in addition to the announcement, announces the evaluation criteria and the evaluation matrix, and provides further information on the object of the award, the contractual regulations and the service specifications. The incoming offers are checked in terms of form and content. The client expressly reserves the right to enter into negotiations with selected bidders regarding their offers. If the client conducts negotiations regarding the offers, the remaining bidders will be invited to the negotiation round and their offers will be negotiated with them separately. Further negotiation rounds remain reserved. The offers will be evaluated based on the evaluation criteria and the evaluation matrix announced there.

Contract notice - General guideline, standard arrangements Open procedure (supplies) Rv underground waste collection systems Framework contract for the supply of underground waste collection systems Rv underground waste collection systems Framework contract for the procurement of underground waste collection systems ... Morerv underground waste collection systems Framework contract for the supply of underground waste collection systems Rv underground waste collection systems Framework contract for the procurement of underground waste collection systems