Tenders of Offizielle Bezeichnung Land Hessen, Vertreten Durch Das Hessische Competence Center Zentrale Beschaffung

Public tender (delivery service) printing ballot papers for the 2025 federal election for the federal state of Hesse. Production and delivery of ballot papers (south, west, east, center and north) for the federal state of Hesse for the election to the 21st German Bundestag expected to take place on February 23, 2025. Production and delivery of ballot papers (south, west, east, center and north) for the federal state of Hesse for the election to the 21st German Bundestag expected to take place on February 23, 2025. Production and delivery of ballot papers for the election to the 21st German Bundestag expected to take place on February 23, 2025 for the unincorporated areas of south, west, east, center and north in Hesse. The required format paper (rc paper) is provided by the client as sheets of 80 gsm in matt old white with 60 white as wide web (bb) and unground in the format 70 x 100 cm. Quality losses that would arise if narrow web format paper (sb) were not used are tolerated by the client during the production process of the ballot papers. Due to the format of the sheet paper provided by the client (70 x 100 cm), the contractor must use at least one sheet-fed offset printing machine in machine class IIIB (format class according to Bvdm) to process the order. Only providers who can carry out all services (typesetting, printing and further processing) in-house can be considered for the production of the ballot papers; the involvement of subcontractors is not permitted. However, a particularly reliable subcontractor can be commissioned with the delivery. Approximately 9 calendar days are available for the production and delivery of the ballot papers for the 2025 federal election. The latest delivery date is expected to be February 7, 2025. The exact delivery dates will be communicated to the respective contractor for each lot by the client as soon as the dates have been set after the contract has been awarded. The ballot papers must be delivered in different quantities directly to the respective municipalities. The distribution key is currently still being determined and will be communicated if the order is placed. The quantities stated in the list of services serve as the calculation basis. The client informs the contractor of the delivery addresses (with contact persons) in the municipalities. The delivery dates must be agreed upon immediately with the municipalities and must be adhered to. Note on the delivery date: Since the election is expected to take place on February 23, 2025 as an early election within 60 days of the dissolution of the Bundestag by the Federal President, the statutory deadlines have been greatly shortened. According to the draft of the Federal Ministry of the Interior and Home Affairs for a regulation on the shortening of deadlines for the election to the 21st German Bundestag, it can be assumed that a final decision on the approval of nominations will be made on January 30, 2025 (24 days before the election), and that the ballot papers can then be approved for printing immediately. If no complaints are lodged, the ballot papers can probably be approved for printing two days earlier. All ballot papers in a constituency must be absolutely identical. It is pointed out that blind and visually impaired people can vote nationwide using a universal ballot paper template (ballot paper marked by cutting off the top right corner, no more holes); this requires unconditional compliance with the specifications for format, frame and the arrangement of text and lines. Furthermore, it must be absolutely certain that ballot papers are not mixed up during production, packaging and shipping. Different colors are assigned to the constituencies as an identifying feature. The packaging is to be marked with the name "Federal Election Ballot Paper", the identifying color and the constituency. The final length of the ballot paper will be decided at a time when an overview of the number of nominations is available. Impressions are to be made on some of the ballot papers for representative election statistics. Proofs of the ballot papers are to be sent to the district election officers. Each district election office issues the printing approval for the corresponding constituency. The layout, header and right-hand side are made available to the authorized printers by the state election officer, the left-hand side by the district election officers as a PDF file. If problems arise in the production process (typesetting, printing and further processing) or shipping, the state election officer for Hesse is available as the client with his assigned employees to provide support. In the event of service disruptions, the contractor must inform the client immediately of the nature and extent of the disruption. The information must include, in particular, details of the constituencies or municipalities affected and a forecast of the full provision of services. The state election officer will issue a separate decree for the federal election for the production and distribution of ballot papers, which must be observed.

Public tender (service) Maintenance of green and outdoor areas and winter service at the Hessisch-Lichtenau police station Maintenance of green and outdoor areas and winter service at the Hessisch Lichtenau police station Execution of maintenance of green and outdoor areas on a total area of approx. 3,312 m² and winter service (seasonal from November 1st of one year to March 31st of the following year) on a total area of approx. 989 m² for the State Office for Construction and Real Estate Hesse (LBIB) - North Branch - Hessisch Lichtenau Police Station, Iindustriestraße 53 - 55 in 37235 Hessisch-Lichtenau. The scope of services for maintenance of outdoor areas includes in particular the removal of flying waste on The entire property, cleaning floor drains/gutters and light shafts, sweeping out the garage and providing garbage cans. The scope of services for green space maintenance includes in particular intensive mowing of the lawn, professional care of the planting area, removal of leaves from the entire property and care of hedges and disposal of leaves. The scope of services for winter service includes clearing and spreading grit on non-public areas, public sidewalks and parking lots (including disabled parking spaces), as well as removing grit after the cold period/winter season and removing snow. Snow removal is to be carried out on request by the client (ag). Constant observation of the objects and the weather situation must be ensured. The maximum response time for winter service is half an hour when snowfall or ice begins to form.

Public tender (service) Physiotherapy for prisoners in the Weiterstadt correctional facility Award of services for the physiotherapeutic care of inmates in the Weiterstadt correctional facility The services for the physiotherapeutic treatment of inmates in the Weiterstadt correctional facility will be awarded for a period of three years, with the option of a tacit extension for a further year, unless one of the contracting parties terminates the contract in writing by the end of the three-year contract term. The maximum contract term is four years. The physiotherapy department of the Weiterstadt correctional facility treats around 115 patients, each with around 6 prescriptions per year (690 prescriptions annually), in accordance with the statutory provisions of the statutory health insurance companies. The scope over the entire service period is therefore around 2,760 prescriptions. Physiotherapy treats limitations in the body's mobility and functionality and is a medically prescribed treatment. It is a useful addition and sometimes alternative to operations or medication. Physiotherapy includes physical therapy exercises, physical measures, massages and manual lymphatic drainage. If required, physiotherapy can take place in the premises of the JVA-Weiterstadt medical department during business hours from Monday to Thursday from 7:30 a.m. to 4:00 p.m. and Friday from 7:30 a.m. to 1:00 p.m.

Public tender (delivery service) Truck spreaders for Hessen Mobil Delivery of truck spreaders for Hessen Mobil Delivery of 6 attachment spreaders for existing carrier vehicles for carrying out spreading work in the catchment area of the Hessian road maintenance department ... Additional delivery of truck spreaders for Hessen Mobil Delivery of 6 attachment spreaders for existing carrier vehicles for carrying out spreading work in the catchment area of the Hessian road maintenance department

Public tender (service) Maintenance, glass and frame cleaning at the Marburg Archives School Maintenance, glass and frame cleaning at the Marburg Archives School Implementation of maintenance, glass and frame cleaning in the Marburg Archives School, Bismarckstrasse 32 (building part I) and Liebigstrasse 39 (building part II and III) in 35037 Marburg. Maintenance cleaning: total annual cleaning area approx. 400,000 m² (annual cleaning area for full cleaning: approx. 152,000 m² / annual cleaning area for visual cleaning: approx. 248,000 m²) as well as 2 x annual glass and frame cleaning with a clear shell dimension of approx. 670.00 m²

Public tender (supply service) Workshop equipment and office furniture Hessen Kassel Heritage Delivery of office furniture and workshop equipment for Hessen Kassel Heritage Delivery of 273 office furniture (lot 1) and 552 workshop equipment (lot 2) for Hessen Kassel Heritage

Public tender (delivery service) printing ballot papers for the 2025 federal election for the federal state of Hesse. Production and delivery of ballot papers (south, west, east, center and north) for the federal state of Hesse for the election to the 21st German Bundestag expected to take place on February 23, 2025. Production and delivery of ballot papers (south, west, east, center and north) for the federal state of Hesse for the election to the 21st German Bundestag expected to take place on February 23, 2025. Production and delivery of ballot papers for the election to the 21st German Bundestag expected to take place on February 23, 2025 for the unincorporated areas of south, west, east, center and north in Hesse. The required format paper (rc paper) is provided by the client as sheets of 80 gsm in matt old white with 60 white as wide web (bb) and unground in the format 70 x 100 cm. Quality losses that would arise if narrow web format paper (sb) were not used are tolerated by the client during the production process of the ballot papers. Due to the format of the sheet paper provided by the client (70 x 100 cm), at least one sheet-fed offset printing machine in machine class IIIB (format class according to Bvdm) must be used to process the order at the contractor. Only providers who can carry out all services (typesetting, printing and further processing) in-house are considered for the production of the ballot papers; the involvement of subcontractors is not permitted. However, a particularly reliable subcontractor can be commissioned with the delivery. Approximately 4 to 6 calendar days are available for the production and delivery of the ballot papers for the 2025 federal election. The exact delivery dates will be communicated to the respective contractor for each lot by the client as soon as the dates have been fixed. The ballot papers must be delivered in different quantities directly to the respective municipalities. The distribution key is currently being determined and will be communicated when the order is placed. The quantities specified in the service specifications serve as a calculation basis. The client informs the contractor of the delivery addresses (with contact persons) in the municipalities. The delivery dates must be agreed directly with the municipalities and must be adhered to. Note on the delivery date: Since the election is expected to take place on February 23, 2025, the exact dates for retrieval or print release have not yet been determined at the time of the award procedure. These dates will be communicated to the contractor immediately after the contract is awarded. Please note that the statutory deadlines are greatly shortened in the event of an early election. If the contract is awarded, the agreement applies that the client sets the delivery time at short notice in accordance with the statutory deadlines. All ballot papers in a constituency must be absolutely identical. It is pointed out that blind and visually impaired people can vote nationwide using a universal ballot template (ballot paper marked by cutting off the top right corner, no more holes); this requires strict compliance with the specifications for format, frame and the arrangement of text and lines. It must also be absolutely certain that ballot papers are mixed up during production, packaging and shipping. Different colors are assigned to the constituencies as an identifying feature. The packaging is to be marked with the designation "Federal Election Ballot Paper", the identifying color and the constituency. The final length of the ballot paper will be decided at a time when an overview of the number of nominations is possible. Impressions are to be made on some of the ballot papers for representative election statistics. Proofs of the ballot papers are to be sent to the district election officers. Each district election office issues the printing approval for the corresponding constituency. The layout, header and right-hand side are made available to the commissioned printers as a PDF file by the state returning officer, the left-hand side by the district returning officers. If problems arise in the production process (typesetting, printing and further processing) or shipping, the state returning officer for Hesse as the client and his assigned employees are available to provide support. In the event of service disruptions, the contractor must inform the client immediately of the type and extent of the disruption. The notification must include particular information on the constituencies or municipalities affected and a forecast of the full provision of services. The state returning officer will issue a separate decree for the federal election for the production and distribution of ballot papers, which must be observed.

Public tender (service) Framework agreement for financial mathematical and financial scientific consulting services Framework agreement for consulting on financial mathematical and financial scientific issues Framework agreement for consulting on financial mathematical and financial scientific issues. ... Multi-framework agreement for consulting on financial mathematical and financial scientific issues Framework agreement for consulting on financial mathematical and financial scientific issues. The (bank-independent) financial mathematical and financial scientific consulting services are - related to the state's credit and derivatives portfolio - related to the state's collateral management and - related to the state's investment portfolios, including the portfolio of the dependent special fund "pension reserve of the state of Hesse". For more details, see the service description. The term of the contract is 6 years from the award of the contract. Due to the new regulation of the ECJ on framework agreements (judgment of June 17, 2021), this ends before the end of the contract term as soon as the maximum amount of €210,000 net is reached.

Public tender (service) Rv Maintenance and calibration of (piston-stroke) pipettes Lhl Framework agreement for the maintenance and calibration of (piston-stroke) pipettes of the Hessian State Laboratory (LHL). Framework agreement for the annual maintenance and calibration of approx. 650 (piston ... Multi-framework agreement for the maintenance and calibration of (piston-stroke) pipettes of the Hessian State Laboratory (LHL). Framework agreement for the annual maintenance and calibration of approx. 650 (piston-stroke) pipettes of the Hessian State Laboratory (LHL) from February 17, 2025 to February 16, 2029 at the locations in Gießen, Kassel Druseltalstrasse, Kassel Versuchsfeld and Wiesbaden.

Public tender (service) Maintenance cleaning of the scullery as well as cleaning of various technical equipment in the state laboratory Maintenance cleaning of the scullery as well as cleaning of various laboratory utensils in the Hessian State Laboratory in Giessen Carrying out maintenance cleaning of a scullery (approx. 38.6 m² of floor space to be cleaned and disinfected daily) as well as cleaning of various laboratory utensils and equipment for the Hessian State Laboratory under the responsibility of the Hessian State Laboratory (LHL). The scope of services includes: - Emptying containers with fabric parts - Pre-rinsing plastic, glass and metal equipment, soaking if necessary - Rinsing and drying this equipment with various industrial dishwashers (incl. Loading and unloading) - Sterilizing - Hygienic storage of utensils - Return of washed equipment to the respective laboratory - Cleaning of currently seven freezer-refrigerator combinations in the sample acceptance area. This cleaning should take place twice a week or after accidental contamination - Daily cleaning and functional check of all machines, objects and equipment used - Careful and proper use of the equipment and facilities provided by the client The distribution of the work is approximately 10% for the maintenance cleaning of the scullery and 90% for the work in the scullery. Cleaning equipment must be provided. The cleaning agents and disinfectants are provided by the LHL.