Office Furniture Tenders

Details: Notice Of Participation In Cooperative Buying Groups In Accordance With The Canadian Free Trade Agreement (cfta) And The Comprehensive Economic And Trade Agreement (ceta), This Advertisement Is A Public Notification That Haldimand County Is A Participating Agency In One Or More Procurements Conducted By The Following Cooperative Buying Group(s): Oecm – Ontario Education Collaborative Marketplace – Www.oecm.ca Las – Local Authority Services – Www.las.on.ca Mgs – Ministry Of Government Services – Www.doingbusiness.mgs.gov.on.ca/ The Following Provides A List Of Programs/services That May Be Procured Through One Of The Buying Groups Listed Above. In Addition, Haldimand County Reserves The Right To Participate In Other Buying Group Procurements Not Identified Below, At Their Sole Discretion. Office Supplies Furniture Janitorial Services Led Retrofitting Courier Services Supply & Delivery Of Bulk Fuels Managed Print Services Collection Agencies Fleet Vehicles Mobile Devices Software Licenses

Details: Amd 001 Answer Questions ***************** Corporate Accommodations With Public Services And Procurement Canada Is Seeking A Contractor To Carry Out Office Relocation Services For Moving Offices, Workplaces, And Other Various Government Facilities, Including Office Equipment, Supplies And Furniture On An ''as And When Requested ? Basis Within The National Capital Region. This Contract Is For A Period Of Two (2) Year, With The Irrevocable Option To Extend The Term Of The Contract By Up To Three (3) Additional One (1) Year Periods. See Statement Of Work Is Attached As Annex “a”. This Rfp Contains A Security Requirement.

Details: Description Provision Of Manpower Services (driver & Janitorial) For Csc Regional Office For Cy 2025 (lot 1) Location / Area: Csc Regional Office, No. 7 Oñate Street, Mandurriao, Iloilo City Terms Of Reference: Provision Of Manpower Services (driver & Janitor) Covering January 1, 2025 To December 31, 2025. The Agency Shall Provide One (1) Driver And (2) Janitors Reporting For Work Daily As Maybe Directed By The Entity Except Saturdays, Sundays And Holidays, Or As Needed With Approved Request For Overtime. Provided, However, That The Work Schedules Of The Assigned Personnel Will Be With The Entity Conformity Of Knowledge. Provided Further, That The Agency Obligates Itself To Increase Or Decrease The Number Of Assigned Personnel Upon Request Of The Entity. 1. General Conditions/technical Specifications: A.1 Driving Services 1. Ensure That Office Vehicles Are Road Worthy Using The Checklist Of Blow Bagets. Likewise Ensure That These Are Kept Clean Before, During, And After Use. 2. Perform On A Daily Basis, Basic Vehicle Cleaning Such As, But Not Limited To, Washing Of Windshields, Simple Body And Tire Cleaning, Wiping Of Dashboards, Ensuring That Interiors Are Free Of Food And Litter, Cleaning Of Seats And The Like. 3. Monitor And Ensure That Vehicle Preventive Maintenance Schedule Is Implemented As Scheduled And The Vehicles Are Kept Roadworthy At All Times. 4. Immediately Report To The Msd Chief Through The Designated Property Officer, In Cases Where The Vehicles Would Need Urgent Repairs For Issues Other Than The Scheduled Maintenance. 5. Perform Messengerial Services As May Be Required Such As But Not Limited To Delivery Of Mails To Courier Service Centers, Perform Simple Liaison Services To Agencies And Other Entities. 6. Vouchers And Its Supporting Documents, Complete And Correct, Should Be Endorsed To The Cashier Upon Return To The Office. Delivery Receipts And/or Receiving Copy Of Documents Should Be Returned To The Requesting Party Asap. 7. As Far As Practicable, Ensure That Vehicle Fuel Is Replenished At The End Of The Trip For The Day. 8. Prepare The Fuel Request Form And Secure Approval From The Msd Chief Through The Designated Property Officer, And Attach The Fuel Receipt To The Fuel Request Form, For Filing. 9. Prepare The Necessary Documents And Other Requirements Needed For The Processing Of Payment For Fuel Every 15th Day Of The Month Except December, The Due Of Which Is The Last Working Day Of The Year. 10. Submit The Properly Accomplished Trip Tickets To The Msd At The End Of Each Trip With Details Such As Date Of Trip, Destination, Purpose Of Trip, Time Of Departure And Arrival, Names Of Passengers, Etc. 11. Surrender The Vehicle Keys To The Guard-on-duty Before Logging Out Of The Office. A.2 Vehicle Maintenance 1. Vehicles Shall Undergo Preventive Maintenance In Accordance With The Approved Vehicle Maintenance Schedule Per Office Vehicle Or As Often As May Be Necessary. Total Distance Travelled Shall Be Monitored For Purposes Of Maintenance Reference. 2. Visual Checking Of Vehicles Should Be Done Regularly. This Includes Checking Of Engine For Leaks, Condition Of Engine Belts And Liquids, Ensure That Vehicle Is Free From Dents And Scratches, Tire Condition, Etc. 3. Renewal Of Vehicle Registration Should Be Done At Least One (1) Week Prior To Its Expiration. A.3 Use Of Office Vehicles 1. The Use Of Office Vehicles Shall Always Be Covered By A Duly Accomplished And Signed Trip Ticket, Indicating The Following: I. Date, Time, Destination, And Other Required Information; Ii. Initials Of The Msd Chief Or Designated Property Officer Affixed Below The Printed Name Of The Authorized Official Iii. Signature Of The Regional Director, Asst. Regional Director Or In Their Absence, The Officer-in-charge. 2. Requests To Avail Of Transportation Services Shall Be Submitted To The Msd At Least 3 Days Before The Scheduled Trip, Using The Prescribed Request For Utility Vehicle (ruv) Form, With A Copy Of The Approved Office Order Of The Requesting Party. 3. Approval Of The Request For The Use Of A Utility Vehicle Shall Be On A First-come-first-served Basis, Subject To Availability Of Drivers And Vehicles. 4. Vehicles May Be Used To Perform Messengerial And Support To Liaison Services. 5. In No Case Shall An Office Vehicle Be Used Without Proper Authorization From The Management Through The Msd. B. Janitorial Services 1. Washing Of Inside Windows And Doors, Frames And Screen; 2. Cleaning And Polishing Of Office Furniture And Fixtures And Counter Excluding Items Or Equipment That Require Specialized Maintenance, Furniture Such As Davenport And Chairs Showing Signs Of Spill Due To Any Caused Shall Be Washed And Cleaned; 3. Washing, Scrubbing And Polishing Of Floors; 4. Application Of Special Sanitizing And Waxing Solution To Hallways, Lobbies And Offices; 5. Dusting And/or Damp Wiping Of Glass Tops, Glass Door, Counters And Furniture; 6. Dusting Of Inside Windows, Window Ledges, Air-vents, Stair Railing And Other Horizontal And Vertical Surfaces; 7. Cleaning Of Glass Walls And Glass Partitions; 8. Cleaning Of Trash Receptacles; 9. Assist In Transferring Of Tables, Chairs, Cabinets And Counter, Etc. Upon Instruction By Authorized Officer Of The Office; 10. Daily Collection Of Garbage And Waste Materials To Be Disposed Of; 11. Frequent Spraying Of Air Fresheners In Work Areas And Other Designated Places; 12. Washing And Cleaning Of All Windows And Glasses Either By Hands Or With The Use Of Class Wiper; 13. Cleaning Of All Light Diffusers; 14. Thorough General Cleaning Of All Areas. 15. Other Services Within The Building Which May Be Assigned By The Management From Time To Time Within The Scope Of Janitorial Services. 2. Miscellaneous Services A. To Provide Extra Manpower Or Extension Of Authorized Tour Of Duty On Christmas And Other Special Occasions And In Case Of Emergencies Or Natural Calamities Necessitating Relief Operations, A Team Of Trained Personnel Within The Authorized Work Force Shall Be Provided To Undertake Such Job Receipt Of Five (5) Days Advanced Notice; B. Provide Minor Carpentry, Electrical And Plumbing Services; C. Clerical/messengerial Services. 3. Obligations Of The Agency A. Equipment And Uniform The Agency Shall Provide Complete Uniform With Proper Identification Card To Its Employees Assigned To The Entity And Shall Also Provide Standard Carpentry Small Tools Needed For Maintenance Services Such As But Not Limited To The Following: Hammer, Saw And Tape Ruler. B. Responsibilities It Is The Responsibility Of The Agency To Provide The Entity Of The Following: 1. Qualified Employees To Perform The Assigned Tasks: 2. Reliever In Case The Assigned Employee (s) Is Absent; 3. Ensure That All Employee Assigned In The Area Shall Follow House Rules And Regulations; 4. Discipline, Supervise And Control All Employees By Following Entity’s Rules And Regulations; 5. Replacement Of Any Employee (s) Assigned At The Office; 6. Conduct Inspection; 7. Monthly Meeting Of Agency With Their Personnel And Regular Check-up/supervision In Site Of The Assigned At The Office; 8. Regular Debriefing Of Personnel Assigned At The Office; 9. Duly Signed Monthly Accomplishment Report To Be Attached To Disbursement Voucher. C. Quality Assurance And Control The Agency Shall Conduct Regular Onsite Inspection And Evaluation Of The Services Performed By The Assigned Employees To The Entity To Ensure And Keep The Quality Of Work With Highest Standard Requirement. D. Human Resource Development The Agency Shall Provide Free Semi-annual Skills Development Seminar To Its Employees Assigned To The Entity To Enhance And Improve Their In-house Driving And Cleaning Skills, Maintenance Of Equipment And Use Of New Cleaning Materials And Supplies (supplied By Entity). Also, The Agency Shall Require All Their Employees Assigned To The Entity To Wear The Proper Uniform To Appear Neat And Clean In Their Work Place. Wearing Of Id Should Always Be Observed At All Times For Proper Identification And Security Purposes. 4. Timeline/schedule Of Delivery The Selected Agency Will Ensure And Deliver The Manpower Services Of One (1) Driver And Two (2) Janitors Who Meet The Qualifications As Stated In The Items Of The General Conditions. The Personnel Shall Render An Eight (8) Hour Service A Day, Five (5) Days A Week, Including Holidays To The Csc Regional Office. The Agency Shall Ensure That A Reliever Be Deployed Immediately In Case Of Changes Or Modifications To The Duty Of Its Assigned Personnel. 5. Duration Of Contract The Contract Shall Commence From The Date Of Signing Until December 31, 2025 Or Until The Execution Of A New Contract Pursuant To Government Procurement Policy Board (gppb) Resolution No. 23-2007 Dated September 28, 2007 “approving And Adopting The Revised Guidelines On The Extension Of Contracts For General Support Services”, Subject To The Agreement Of Both Parties. 6. Terms Of Payment For And In Consideration Of The Services Rendered By The Selected Agency, Cscro Vi Shall Pay The Contract Amount On A Monthly Basis. 7. Other Conditions Mode Of Payment To The Winning Security Agency Shall Be Made Via Issuance Of Mds/commercial Checks.

Details: Description Republic Of The Philippines Province Of Nueva Ecija Municipality Of Talavera Invitation To Apply For Eligibility And To Bid Goods 2025 - 02 The Municipal Government Unit Of Talavera, Through Its Bids And Awards Committee (bac), Invites Contractors For Suppliers For Public Bidding Of Goods To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract/project: Name Of Projects Location Brief Description Approved Budget For The Contract (abc) Contract Duration Price Of Bid Documents Purchase Of Ict Equipment, Office Equipment, Furniture & Fixtures Municipality Of Talavera Aircon/laptop/printers/etc… 493,750.00 90 Days 500.00 Prospective Bidders Should Passes A Valid License Applicable To The Contract, Have Completed A Similar Contract Both Design And Construction, With A Value At Least 50% Of The Abc, And Have Key Personnel (for Construction & Design Profession) And Equipment, (listed In The Bidding Documents) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bid Evaluation Procedure To Be Adopted Shall Be In Accordance With The Gprb Resolution No. 22-2007 Dated September 8, 2007. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Implementing Rules And Regulations (irr) And Gprb Resolution No. 22-2007 Dated September 8, 2007. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents December 23, 2024 - January 15, 2025 Deadline For Submission Of Bid And Opening Of Bids January 15, 2025 (10:00 A.m.) ` Bid Opening Shall Be Conducted At The Municipal Engineering Office, Municipal Compound, Pag-asa, Talavera Nueva Ecija. Pursuant To The Iatf Guidelines And Strict Implementation Of The Minimum Health Standard And Safety Protocol. The Bac Will Issue To Prospective Bidders Eligibility Forms At Bac Office, Engineering Office, Municipal Building, Talavera, Nueva Ecija Upon Their Submission Of A Loi. Prospective Bidders Shall Submit The Eligibility Requirements To The Bac At The Said Address. They May Also Obtain The Results Of The Eligibility Check By The Bac At The Same Address. The Bac Will Issue Bidding Documents Only To The Bidders Declared By The Bac To Be Eligible For The Bidding Upon Payment Of A Non-refundable Amount Of Bidding Documents Stated In The Implementing Rules And Regulation Of R.a. 9184 To The Municipal Treasurer’s Office Of Talavera. The Award Shall Be Made After Bid Evaluation & Post Qualification Of The Lowest Calculated Bids. The Lgu - Talavera Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Contact Person: Marvin Dc. Marcial Approved By: Bac Secretariat (sgd) Alfredo S. Atraje Bac Chairman Noted: (sgd) Hon. Nerito S. Santos Jr. Municipal Mayor

Details: 5. Project Number (if Applicable) code 7. Administered By 2. Amendment/modification Number code 6. Issued By 8. Name And Address Of Contractor 4. Requisition/purchase Req. Number 3. Effective Date 9a. Amendment Of Solicitation Number 9b. Dated page Of Pages 10a. Modification Of Contract/order Number 10b. Dated bpa No. 1. Contract Id Code facility Code code offers Must Acknowledge Receipt Of This Amendment Prior To The Hour And Date Specified In The Solicitation Or As Amended, By One Of The Following Methods: the Above Numbered Solicitation Is Amended As Set Forth In Item 14. The Hour And Date Specified For Receipt Of Offers e. Important: is Extended, (a) By Completing Items 8 And 15, And Returning __________ Copies Of The Amendment; (b) By Acknowledging Receipt Of This Amendment On Each Copy Of The offer Submitted; Or (c) By Separate Letter Or Electronic Communication Which Includes A Reference To The Solicitation And Amendment Numbers. Failure Of Your acknowledgment To Be Received At The Place Designated For The Receipt Of Offers Prior To The Hour And Date Specified May is Not Extended. 12. Accounting And Appropriation Data (rev. 11/2016) is Required To Sign This Document And Return ___________ Copies To The Issuing Office. is Not, a. This Change Order Is Issued Pursuant To: (specify Authority) The Changes Set Forth In Item 14 Are Made In The Contract Order No. In Item 10a. 15c. Date Signed b. The Above Numbered Contract/order Is Modified To Reflect The Administrative Changes set Forth In Item 14, Pursuant To The Authority Of Far 43.103(b). result In Rejection Of Your Offer. If By Virtue Of This Amendment You Desire To Change An Offer Already Submitted, Such Change May Be Made By Letter or Electronic Communication, Provided Each Letter Or Electronic Communication Makes Reference To The Solicitation And This Amendment, And Is Received Prior To the Opening Hour And Date Specified. c. This Supplemental Agreement Is Entered Into Pursuant To Authority Of: d. Other contractor 16c. Date Signed 14. Description Of Amendment/modification 16b. United States Of America except As Provided Herein, All Terms And Conditions Of The Document Referenced In Item 9a Or 10a, As Heretofore Changed, Remains Unchanged And In Full Force And Effect. 15a. Name And Title Of Signer 16a. Name And Title Of Contracting Officer 15b. Contractor/offeror standard Form 30 previous Edition Not Usable prescribed By Gsa - Far (48 Cfr) 53.243 (type Or Print) (type Or Print) (organized By Ucf Section Headings, Including Solicitation/contract Subject Matter Where Feasible.) (number, Street, County, State And Zip Code) (if Other Than Item 6) (specify Type Of Modification And Authority) (such As Changes In Paying Office, Appropriation Date, Etc.) (if Required) (see Item 11) (see Item 13) (x) check one 13. This Item Applies Only To Modifications Of Contracts/orders, it Modifies The Contract/order No. As Described In Item 14. 11. This Item Only Applies To Amendments Of Solicitations amendment Of Solicitation/modification Of Contract (signature Of Person Authorized To Sign) (signature Of Contracting Officer) 1 5 0001 01-02-2025 544-25-2-4075-0004 none 36c247 department Of Veterans Affairs visn 7 Network Contracting Activity central Alabama Healthcare System 215 Perry Hill Road montgomery Al 36109 36c247 department Of Veterans Affairs visn 7 Network Contracting Activity 215 Perry Hill Road montgomery Al 36109 to All Offerors/bidders 36c24725q0195 x x x x 1 this Amendment To Solicitation 36c24725q0195 Is To Do The Following: (1) Add Additional Language To The Scope Of Work (2) Provide Responses To The Request For Information (rfi) Received Prior To Due Date (see Attached). *all Other Terms And Conditions Remain Unchanged. quentin Deloney contracting Officer, Nco-07 page 5 Of 5 request For Information 36c24725q0195 facility Mover And Event Set-up Services *any Questions Received That Have Not Been Answered In This Amendment Have Already Been Addressed In The Posted Solicitation. scope Of Work Is Amended To Add The Following: The Contractor Shall Furnish All Contract Oversight, Management; Supervisory And Technically Trained Personnel; Uniforms; Equipment, Materials, And Supplies Necessary To Provide Commercial Office Moving And Relocation Services For Cavhcs. This Includes, But Is Not Limited To The Following, Providing All Labor, Materials, And Equipment Necessary To Accomplish The Work As Stated Herein, E.g., Excess Property Pickup; Furniture Installation; Systems Furniture Installation, Breakdown And Repair; Routine Moving Services Activities; Special Event Set-ups And Breakdown; Special Furniture Cleaning And Repair; Special Moving Activities; Place Furnishing In Designated Storage Areas In An Organized Manner; And Special Handling Moving Activities. Contractor Shall Furnish All Vehicles, Insurance, Drivers, Supervision, Maintenance, Equipment, And Operating Supplies/services Required For The Safe Transport Of The Property And Performing All Services Necessary To Provide Moving And Relocation Services. 1. Confirm There Are 6 Locations With 4 Being In Alabama And 2 In Ga. That Will Need To Be covered. -9 Possible Work Locations; 3 Georgia Locations; 6 Alabama Locations -215 Perry Hill Road, Montgomery, Al 36109-3725 (main Work Site) -8105 Veterans Way, Montgomery, Al 36117-3879 -2400 Hospital Road, Tuskegee, Al 36083 (main Work Site) -3753 Ross Clark Circle, Suite 4, Dothan, Al 36303-2291 -159 Whetstone Street, Monroeville, Al 36460-2625 -301 Andrews Ave, Fort Rucker, Al 36362-5107 -6635 Bass Road, Fort Moore, Ga 31905-5602 -2100 Comer Avenue, Plaza G, Columbus, Ga 31904-8725 -6910 River Road, Columbus, Ga 61904-2316 2. In The Previous Notification We Seen 2 Locations Located On A Military Base That Were Not Listed On the Solicitation. Will They Be Covered? -past Solicitations/contract Awards Will Not Be Addressed 3. Will The Us Veterans Affairs Be Assisting In Obtaining Military Passes To Gain Access To The bases? - When Delivering To Those Locations, Contractor Must Meet All Requirements By The Base To Gain Access. A Va Representative Will Be Onsite, But This Does Not Mean Any Of The Requirements Will Be Waived. Contractor Will Know At Least A Week In Advance Of Any Deliveries Going To The Base. 4. You Stated Work Is To Be Performed Mon- Fri. But Days Can Be Changed And On Calls Can Bedone. Please Clarify? -please Read The Solicitation In Its Entirety. Solicitation States As Needed Schedule Updates Shall Be Coordinated With And Approved By The Cor. Such Changes Will Be Coordinated In A Manner Both Parties Can Agree On. 5. Will There Be A Set Schedule Confirmed At The Beginning Of The Contract For The Duration Of the Contract? - No Set Schedule But Schedule Will Be Reasonable And Agreed Upon By Va And Contractor. 6. If No Set Schedule, When Will We Be Notified Services Are Needed? -a Week In Advance 7. Will The Va Be Able To Add Days On Through The Week With Last Minute Notices? -yes, As Long As The Hours Do Not Exceed The 860 Hours Allotted For The Year. 8. Is The Price Schedule 860 Hours? -please Read The Solicitation In Its Entirety. The Base And Each Option Year Is Allotted 860 Hours. 9. Is 860 Hours Guaranteed For The Year? -no; 860 Hours Worth Of Work Are Not Guaranteed To Be Used Each Year. 10. Are You Guaranteeing 8-hour Workdays? -no 11. Are We Working 1-2 Hours, 4-5 Hours, Or Full 8-hour Days? - Contractor Should Plan For Between 4 To 8-hour Days. 12. Will Items Be Left On The Truck From The Prior Day, Overnight, To Be Delivered The Following day? - The Government Does Not Expect Items To Be Left On Trucks. Contractor Is Responsible For Loading And Unloading Mover Vehicles, Therefore, It Is At The Contractor S Discretion And Cost To Store Any Items During Moving Activities And Should Be With The Approval And Proper Notification Being Made To The Cor. 13. Can You Clarify Excess Pickup? Are We Expected To Move Medical And It Equipment? Could You Give Examples Of Oversized Items? - This Could Be Cubical Panels, White/glass Boards, Desks, Etc.. Examples Of Oversized Equipment May Include Pews, Conference Room Tables, Desks, And Storage Cabinets. 14. Confirm That You Are Aware That There Are 6-8 Services Added On That Were Not There In The previous Years? Therefore, This Will Drive The Hourly Rate Up Tremendously. -previous Contract Awards; Solicitations; Or Occurrences Will Not Be Addressed. Only Clarifications On The Information Presented In The Current Solicitation Will Be Made. 15. Our Hourly Rate Are To Include Pricing For Equipment, Labor, Fuel, Miles, Etc..? -hourly Rate In Proposals Should Be All Inclusive. 16. Under Specialty Furniture Cleaning And Repair. Can You Clarify The Repair Service Needed? - Re-attaching Doors To Furniture; Replacing Missing Screws/nuts On Furniture; Replacing Arms On Task Chairs; Or Glides On Tables/chairs. 17. If A Repair Is Performed Who Takes The Liability Of That Item Breaking Again? - If A Repaired Item Breaks Due To The Repair Being Negligent, The Contractor Will Be Held Liable. 18. Will We Be Moving Equipment That Is Still Covered Under The Warranty? - Yes, Some Items May Be Under Warranty Such As Desk And Chairs. 19. Will We Be Mounting Items On Walls? Provide Examples? - Not On A Regular Basis. For Example, Some Workstations Mount To The Wall And Other Furniture Must Anchored To The Wall To Prevent Tilting. 20. Who Will Be Responsible For Holes In The Wall And Where Does That Fall Under The Lease agreements Of These Buildings And Who Will Be Responsible? 21. Could You Provide More Details On The Specific Tasks Involved In The Relocation, Moving, And Event Set-up Services - Please Read The Solicitation In Its Entirety 22. What Is The Expected Volume Of Items (e.g., Office Furniture, Equipment) To Be Moved And Set Up? - Unpredictable; As Needed Basis 23. Are There Any Special Handling Requirements (e.g., Fragile Or High-value Items)? -please Read The Solicitation In Its Entirety. 24. Can You Confirm If This Will Be A Firm-fixed-price Contract? -yes 25. Will The 860 Hours Be Paid Regardless Of Whether They Are Utilized? -no; Only Hours Worked Will Be Payable 26. Will This Be An On-call Contract, Or Will There Be A Confirmed Schedule? - For On Lease Properties, Movers Will Not Be Mounting Anything To The Wall. For The Two Main Campuses (central Alabama Veterans Health Care System East Campus 2400 Hospital Road, Tuskegee, Al 36083 And Central Alabama Veterans Health Care System West Campus 215 Perry Hill Road, Montgomery, Al 36109-3725) Cor Will Work With Maintenance To Repair Holes In The Wall From Furniture Removal. The Movers Are Not Expected To Paint Or Patch Unless The Movers Have Damaged Walls Or Doors Due To Negligence And/or Accident. 27. Are There Any Penalties For Delays Or Failure To Meet Performance Standards? -yes, Unsatisfactory Ratings; Opt-out Of Exercising Options; And Possible Termination For Cause 29. Are There Specific Quality Assurance Standards That Need To Be Adhered To? - Please See Attached Quality Assurance Plan Posted On Page 89.

Details: Amendment 0001 - The Due Date For Qualifications Has Been Extended To Monday, January 13, 2025, 2:00pm Est. Government Responses To Rfi's Have Been Attached To This Notice. description: this Is A Request For Qualifications For Architect And Engineering (a&e) Services. This Request Is 100% Set-aside For Small Business’s Registered Under The Applicable Naics Code 541330 – Engineering Services, With A Size Standard Of $25,500,000. the National Institute Of Standards And Technology (nist), An Agency Of The U.s., Department Of Commerce, Intends To Award Multiple Indefinite Delivery Indefinite Quantity (idiq) Contract(s) For General Architectural And Engineering (a/e) Services For The Nist Gaithersburg Campus Located At 100 Bureau Drive, Gaithersburg, Md 20899. A/e Services Under The Contract May Include The Following: evaluation And Feasibility Studies To Include Engineering Modeling And Simulation demolition Of Nist Structures, Utilities, And Infrastructure repair And/or Repair By Replacement, Modification/reconfiguration, Building Additions, And Upgrades To Nist Facilities (e.g., Laboratories/scientific Research, Office, Industrial). Including But Not Limited To Architectural, Mechanical, Electrical, Communications, Structural, Fire Protection, And Building Enclosure (e.g., Roofs, Windows, Foundations). repair And/or Repair By Replacement, Modification/reconfiguration For Campus Utility Systems And Supporting Underground Structures comprehensive Historical Assessments For The Preservation, Rehabilitation, And Restoration Of Historic Property interior Design Services Consisting Of Programming And Space Assessment, Fit Plans, And Office Furniture To Enhance Aesthetics, Comfort, Efficiency, And Workplace Safety. cost Estimating For Different Levels (e.g., Concept, Detailed Program, Project) life Cycle Cost Analysis Identifying Cost Elements From Initial Concept Through Operations, Support, And Disposal. hazardous Material Survey And Risk Assessment (e.g., Asbestos, Mold, Lead Paint) roofing And Waterproofing Services Such As Visual Inspections And Existing Conditions Surveys, Failure Investigation, And Design For Repairs. commissioning Design Including Assistance Of Development Owner’s Project Requirements (opr), Design Document Reviews, Development Of Commissioning Specifications And Or Initial Commissioning Plan program Of Requirements (por) Development By Meeting With Campus Personnel And Confirming Design Intent For Building And/or Major Systems (e.g., Mechanical, Electrical, Plumbing, Structural, Controls, Security, Fire Alarm, Etc.) value Engineering Analysis To Achieve Design Goals While Lowering Life Cycle Costs And Maintaining The Required Performance, Quality, Reliability, And Maintainability. record Drawings Development From Compiled As-built Set. surveying (e.g., Alta/ascm, Boundary, Topographic, Construction, Site Planning) roads/sidewalks Repairs And Replacement evaluation Of Items Requiring Earthwork Such As Excavation, Grading, Ponds, Drainage, Foundation, And Footings landscaping Design gates, Fencing, And Related Engineering Necessary To Support A Campus Environment permit Applications Submission To Regulatory Authorities Based On Specific Project Requirements. To Be Coordinated With Cor And Or Ahj For Acceptance And Or Approval environmental Compliance (state Or Federal) Conforming To Laws, Regulations, Standards, And Other Requirements construction Quality Management To Include But Not Limited To Commissioning Services contract Information: the Period Of Performance Of The Idiq Contract(s) Shall Be Five (5) Years. Annual Fully Burdened Labor Rates Will Be Negotiated Prior To Award. All Services Will Be Ordered Via The Issuance Of Individually Negotiated Firm-fixed-price Or Not­to-exceed Task Orders, Ranging In Value From $10,000 And $2,000,000. Each Idiq Contract Shall Include A Guaranteed Minimum Order Of $5,000. The Cumulative Amount Of All Task Orders Shall Not Exceed $9,800,000. the Government Anticipates Award Of Three (3) Or More Idiq Contracts; However, The Actual Number Of Awards Shall Be Made At The Discretion Of The Government. submission Requirements: consideration Will Be Limited To Professional A/e Firms Licensed And Registered In Maryland Who Provide A/e Services Primarily In The Disciplines Of Architectural, Civil, Structural, Mechanical, Electrical, And Environmental Engineering For Pre-design, Design, And Post-design Of Research Laboratory Facilities. firms Meeting The Above Requirements And Desiring Consideration Must Submit Their Qualifications By No Later Than The Date Specified In This Announcement Via Email To The Following Addresses Using The Email Subject Line “rfq Submission – General Ae Services Idiq Nb195000-25-00009”: Trent.stevens@nist.gov Guzel.gufranova@nist.gov Teresa.harris@nist.gov qualification Submissions Shall Include One (1) Original Electronic Copy In Adobe .pdf Format Of Their Standard Form 330 (sf-330) With Appropriate Data. Ae Firms Shall Include All Subcontractor's Resumes In Part 1 Of The Sf-330. Part 2 Of The Sf-330, General Qualifications, Should Also Be Submitted For Each Subcontractor Or Consultant. Indicate The Solicitation Number On All Documentation Submitted. along With The Sf-330, Offerors Shall Include: a Copy Of Your Current Registration In System For Award Management (sam); proof Of Small Business Status; a Cover Page That Provides: offeror’s Name And Address; offeror’s Uei Number; And, the Name, Title, Email, And Phone Number For The Authorized Representative Of The Offeror. submissions Will Be Evaluated By A Source Selection Evaluation Board (sseb) And Ranked Based On The Stated Evaluation Factors. The Government Will Then Establish A Competitive Range; Firms That Fall Within This Range Will Be Invited To Present Their Capabilities To The Sseb. Formal Solicitations Requesting Fee Proposals Will Be Issued To The Highest Qualified Firms As Determined By The Government. request For Information (rfi) questions And Rfi's Must Be Submitted No Later Than 1:00pm Et On 12/10/2024 Via Email To The Following Addresses Using The Subject Line “rfi - General Ae Services Idiq Nb195000-25-00009” : Trent.stevens@nist.gov Guzel.gufranova@nist.gov. the Contracting Officer Will Post Government Responses To Rfi’s On This Site As An Amendment To This Announcement. Firms Are Responsible For Monitoring This Site For Amendments To The Request For Qualifications. selection Criteria: all Work Performed Shall Be Under The Direct Control And Supervision Of A Professional And Experience Licensed Architect/engineer Employed By The Prime Contractor Assigned As The Responsible Party. part I: Evaluation Of Sf-330 prospective A-e Firms Will Be Evaluated Based On Their Demonstrated Competence And Qualifications For The Type Of Professional Services Required. The Agency Will Evaluate Each Potential A-e Firm In Terms Of This Announcement. The Selection Criteria Are Listed Below In Descending Order Of Importance: factor 1: Specialized Experience page Limit – 15 Pages firms Who Fail To Meet The Qualifications Of Factor 1 Will Not Be Evaluated On Subsequent Evaluation Factors And Will Not Be Considered For Award. offeror Shall Demonstrate The Specialized Experience And Technical Competence Of Its Firm And Its Proposed Subcontractors Performing A/e Services Meeting The Criteria Of This Solicitation Within The Past Sixty (60) Months By Providing At Least 3 But No More Than 5 Example Projects (sections F, G, And H Of The Sf330) Addressing Each Of The Subfactors Listed Below (1a, 1b, 1c, And 1d). Offeror Shall Provide At Least One Example For Subfactor 1d. All Designs Shall Be Completed At Time Of Request For Qualifications (rfq). For The Purposes Of This Evaluations, “completed” Projects Shall Mean Projects Where Final Work Was Submitted, Approved, And Accepted By The Project Owner. A. The Offeror Shall Describe Design For Renovations With Dates That Include Commercial Window Replacements, Masonry Repairs, And Roofing Repairs. Roofing Designs Are For Replacement Of An Existing Roofing System And Would Include Design And Specifications For New Built-up Roofs (at Least Three Ply) Of At Least 20,000 Sf Minimum, Including Drains, Coping And Flashing. Built Up Roofing Can Either Be Hot Or Cold Applied. B. The Offeror Shall Also Describe With Dates Laboratory Design For Renovations Of At Least 2,000 Sf Which Include Replacement Or New Fume Hood Installation Of A Fume Hood At Least Four Feet In Width, New Laboratory Grade Casework, New Seamless Flooring, And Plumbing That Includes Either Eye Wash Station Or Safety Showers. Laboratories Shall Be For Commercial Facilities, Federal And State Facilities, Hospitals, And College/universities. High School And Lower School Grade Laboratories Will Not Be Considered. C. The Offeror Shall Describe With Dates Designs That Include Laboratory Facility Mechanical, Plumbing, And Electrical Renovations, Upgrades And Alterations That Include Major Utility Systems, Facility Construction And Reconfiguration, Branch Circuits Of At Least 50 Amperes At 208v Or 480v, 3 Phase Power For Installation Of Specialized Scientific Tools, Equipment And Instrumentation (provide Amperage, Phases, And Voltages In Offer). The Contractor Shall Describe Distribution Of Manifold Specialty Gasses Utilizing At Least One Of The Following (nitrogen, Helium, Compressed Air, Or A Custom Blend) Within The Lab (note Which Gas Was In Manifold). D. The Offeror Shall Describe, With Dates, Life Safety And Code Compliance Of The Following: Ibc And Nfpa Analyses, Access And Egress Analyses, Fire Alarm Systems And Device Designs, Nfpa 13 Fire Suppression System Modification Calculations And New Installations, And Hazardous Detection Systems (radiological Or Toxic Gas Monitoring Systems). Note Which Detection System (radiological Or Toxic Gas Monitoring System) Is Being Referenced. factor 2: Professional Qualifications page Limit – 17 Pages the Offeror Shall Demonstrate The Technical Expertise And Professional Qualifications Of Its Proposed Team, Including Subcontractors And Consultants, To Perform The Required A/e Services By Providing Résumés (section E Of The Sf330) For All Of The Following Disciplines: principle senior Architect senior Cost Estimator senior Civil Engineer senior Electrical Engineer senior Fire Protection Engineer senior Geo-technical Engineer senior Laboratory Planner mechanical Engineer (piping) senior Mechanical Engineer (piping) senior Mechanical Engineer (hvac) senior Environmental Engineer senior Scheduler senior Surveyor senior Water Proofing Engineer senior Structural Engineer 2. Senior Positions Of Each Discipline Shall Have A Minimum Of Ten (10) Years Applicable Experience And Shall Be Licensed And/or Certified In Their Applicable Discipline. 3. The Offeror Shall Identify The Roles Of Its Key Personnel By Provide Resumes/sf 330s For Its Proposed Key Personnel That Include Credentials, Education, Registrations, Relevant Experience, And Their Role In Performing Requirements Outlined In Factor 1. 4. The Offeror Shall Submit An Organizational Chart Showing The Interrelations Of The Proposed Team Including All Subcontractors And Consultants. factor 3: Geographical Location page Limit – 1 offeror Shall Be Within 50 Miles Of The Nist Main Campus In Gaithersburg, Md. Nist Address Is 100 Bureau Drive, Gaithersburg, Md 20899. Offeror Shall Demonstrate This Distance By Submitting Information (driving) Via An Internet Mapping Program. The Driving Shall Begin At The Offeror’s Office To Nist. factor 4: Capacity page Limit – 2 Pages the Offeror Shall Describe Their Team, Including Subcontractors, Capability To Complete Simultaneous Tasks Within The Required Timeframe Based On Current And Planned Workload And Expected Backlog. the Offeror Shall Confirm That There Is Sufficient Capacity Within The Firm, Or That Additional Professional Capacity Can Be Increased As Needed In A Timely Manner To Deliver Projects That Meet The Government’s Specialized Requirements. factor 5: Past Performance page Limit – None offeror Shall Provide Past Performance Information For The Relevant Projects Identified In Their Factor 1 – Specialized Experience Submission In The Form Of Either A Contractor Performance Assessment Reporting System (cpars) Report Or The Provided Past Performance Questionnaires (ppqs). if The Project Was Completed For The Federal Government, The Offeror Shall Provide A Copy Of The Most Recently Completed Contractor Performance Assessment Reporting System (cpars) Report. if No Cpars Is Available, Offeror Shall Use The Provided Past Performance Questionnaire (ppq). Ppqs Shall Be Completed And Signed By The Customer Identified In The Relevant Project. Limit Of One Ppq Per Project. if An Offeror Submits Incomplete Past Performance Or Fails To Submit Any Past Performance Information, The Government May Evaluate Past Performance Based On The Information Obtained Concerning The Offerors’ Performance Relevant To Services Similar In Scope, Complexity, And Size For The Prime Contractor. Additionally, The Following Resources Will Be Used For Evaluation: contractor Performance Assessment Reporting Systems (cpars), Or Similar Systems Of Other Government Departments And Agencies, interviews Within Nist If Offeror Holds/held Previous Contracts, interviews With Program Managers And Contracting Officers, And; other Sources Known To The Government, Including Commercial Sources. in The Case Of An Offeror Without A Cpars Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available, The Offeror Shall Be Rated Neither Favorably Nor Unfavorably. part Ii: Oral Presentations in Accordance With Far 36.602-3, The Government Will Hold Discussions With At Least Three Of The Most Highly Qualified Firms (firms Within The Competitive Range). More Details Related To The Presentations Will Be Provide To The Firms That Are Selected To Move Forward. fee Proposal only Those Firms Selected For Award Will Be Invited To Provide A Fee Proposal. Firms Shall Submit Along With Their Fee Proposal A Copy Of Audited Overhead Rate Statement Prepared In Accordance With The Federal Acquisition Regulation (far), Part 31 For The Prime And Their Sub-consultants. The Audit Must Be From A Federal, State, Local Government Or An Independent Third-party Auditor In Accordance With Far 31. Audit Conducted In Accordance With Generally Accepted Accounting Principles (gaap) Will Not Be Accepted.

Details: Description Rfq No. 1396 Pr No. 4122-24bac Request For Quotation For Goods And Services Section 53.9 Negotiated Procurement - Small Value Procurement "supply, Delivery And Installation Of Modular Office Partition Table And Furnitures" Section I. Mandatory Requirements (note: Failure To Submit Any Of The Following Requirements Will Be Automatically Disqualified) A. Philgeps Registration (platinum Membership And Red Membership) Ü Mayor's / Business Permit Ü Income/business Tax Return (for Abc 500k And Above) Ü Certificate Of Bir Registration (for Abc 50k And Above) Ü Dti Registration Submit A Clear Copy Or Documentation Of The Proof Of Payment For The Renewal Of Expired Permit/s. B. Photocopy Of One (1) Company Id Or One (1) Valid Id W/ Three (3) Specimen Signature C. Notarized Original Omnibus Sworn Statement (for Abc 50k And Above) D. Professional License/curriculum Vitae (consulting Services) E. Menu List For Catering Services F. The Supplier Must Not Have Any Record Of Non-compliance Over The Past Three (3) Years. Section Ii. Instructions: 1. Please Write Legibly. 2. The Bidders/suppliers Or Their Authorized Representative Shall Accomplish This Form Including Unit Price And Total Price As Well As Sub- Total And Grand Total (if Applicable) And Affix Their Signature Over Printed Name Indicated In The Lower Portion Of This Form. 3. Indicate Offered Brands And Specifications (if Applicable). 4. Quotation(s)/proposal(s) Shall Be Submitted At The Procurement Management Section (bac Office), Bureau Of Plant Industry, 692 San Andres Street, Malate, Manila Or Through Courier Or Email (pms.rfq@buplant.da.gov.ph). 5. Only Sealed Canvass Submitted In Person Or Through Courier Shall Be Considered By The Bac. The Bidders/suppliers Shall Reflect On The Envelope The Rfq Number And The Pr No. The Bac Shall Not Be Responsible On The Pre-emptive/premature Opening Of The Proposal. 6. Any Insertions, Erasures, Or Overwriting Shall Be Valid If Only They Are Signed Or Initialed By The Bidders/suppliers Or Their Authorized Representative. 7. Quotation Must Include All Kinds Of Taxes For The Item(s)/services Listed Hereunder, Including Delivery Charges. 8. Price Quotation(s) Submitted Shall Be Valid For A Period Of One Hundred Twenty (120) Days Reckoned From The Deadline For Submission Of Quotations As Reflected In This Form. 9. Awarding Shall Be Done Per Lot. 10. Deadline For Submission Of Bids: January 10, 2025 (9:00am). 11. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Quotation Or Highest Rated And Responsive Quotation For Consultancy Services, The Bpi- Bac Shall Employ The Rules Specified In The Irr Of Ra 9184. 12. Delivery/installation/completion Period: Thirty To Sixty (30-60) Calendar Days Upon Reciept Of Purchase Order (p.o.). 13. The Uniform Guidelines For Blacklisting Set Forth In Appendix 17 Of The 2016 Revised Irr Of Ra 9184 Shall Apply. 14. The Supplier/bidder/contractor Must Have No Violation With Its Transactions With The Bureau Based On Bpi Records And Bpi Memorandum Order 328 Series Of 2023. 15. The Bureau Of Plant Industry Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. "notice/announcement: Bureau Of Plant Industry Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. " Approved Budget For The Contract: Php 986,168.00 End User: Npqsd-central Office Qty Unit Item/description Ceiling Price/ Offered Unit Total Per Unit(php) Brand Price Price Capital Outlay- Furnitures And Fixtures 1 Lot Supply And Installation Of Modular Office Partition Table And Furniture 986,168.00 "place Of Delivery: Bpi-malate, Manila Proposed Delivery Period: 30-60 Calendar Days From The Receipt Of Purchase Order" Grand Total 986,168.00 Philgeps Posted Joan-may R. Tolentino Bac Chairperson Canvasser The Bpi-bids And Awards Committee (bac) 692 San Andres, Malate Manila In Connection With The Above Request, I/we Submit Our Quotation Indicated Above. I/we Have Carefully Read And Fully Understand The Minimum Requirements And Agree To Furnish And/ Or Deliver The Above Mentioned Requirement(s) In Conformity With The Specifications/terms Or Reference/scope Of Work Indicated/attached Thereto. ________________________________________ _________________________________ __________________ ________________________________________ Signature Over Printed Name Company Name Of Bidder Philgeps Registration Number ________________________________________ _________________________________ __________________ ________________________________________ Contact Number(s) Office Adress Email Address Of The Bidder ________________________________________ ________________________________________ Tax Identification Number (tin) Date Accomplished Payment Shall Be Made Through Land Bank's Lddap-ada/bank Transfer; Bank Transfer Fee Shall Be Charged Against The Creditor's Account. Payment Details: Banking Institution: ________________________________________________ Account Number:___________________________________________________ Account Name:______________________________________________________ Branch:_______________________________________________________________

Description: This Procurement Is Subject To The Provisions Of The Canadian Free Trade Agreement And The Canada-european Union Comprehensive Economic And Trade Agreement. Where Permissible Under The Applicable Trade Agreements And The Regulation Under The Procurement Act, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference. Movers, Furniture And Office Equipment And Storage Scope This Invitation To Tender Consists Of Moving Services As Per The Attached Specifications On Behalf Of The Department Of Transportation And Infrastructure, For A Period Of Two (2) Years From February 1, 2025 Until January 31, 2027 With The Option To Renew For Two (2) Additional One (1) Year Periods In One (1) Year Increments Upon Written Agreement By Both Parties. Option Year Pricing Shall Be Subject To Negotiation Of A Satisfactory Contract Price Not To Exceed The Tendered Price Plus Any Published Increase In The New Brunswick Consumer Price Index. Contract Award Criteria Contract Will Be Awarded To The Lowest Compliant Bid Which Meets The Requirements Detailed Within The Attached Specifications For Items 3 To 13 Of The Tender Documents. The Criteria For Awarding This Tender Will Be Based On The Total Lowest Compliant Bid Of The Hourly Rates (both Regular And Overtime, Items 3 Through 13) Required To Perform The Work. Note See Appendices A, B & C Located In The Attached Specification. Requirements Prior To Award, References, Criminal Record Checks, Insurance And Worksafe Nb Registered And In Good Standing, Will Be Required As Per Section 4, 9, 15 And 16 Respectively. Prior To Award, Appendix "c" (located In Specifications) Must Be Completed And Submitted. It Is Recommended To Submit The Completed Document With Your Bid Submission. How To Fill In Pricing There Are No Additional Pricing Sheets To Be Completed With This Bid. Vendors Should Bid Directly On This Invitation To Tender. How To Fill In Pricing: Unit Price = Price Per Hour The Price Bid Shall Not Include Hst. Vendors Are Required To Sign And Date Their Bid In The Space Provided Below Vendor Questions All Inquiries Should Be Received Seven (7) Calendar Days Prior To The Closing Date; Any Inquiries Received Less Than 7 Calendar Days Prior To The Closing Date Cannot Be Guaranteed A Response. Please Reference The Tender Number And Closing Date Within Your Communications To Ensure A Prompt And Accurate Reply. This Is A Tender Notice Only. In Order To Submit A Bid, You Must Obtain Official Tender Documents From The New Brunswick Opportunities Network, Another Authorized Tendering Service Or As Indicated In The Tender Notice. Solicitation Documents Will Be Provided In Either Of The Province Of New Brunswick's Two Official Languages; English Or French Upon Request. Instructions For Bid Submission 1. Effective April 15, 2020, Service New Brunswick Is No Longer Accepting Paper Bids, And The Central Tendering Branch Is Closed To The Public. Public Tender Openings Are No Longer Taking Place; However, Results Continue To Be Posted On Nbon. 2. Bids Will Only Be Accepted By Electronic Transmission As Follows: A. By E-bidding Through Nbon (when E-bidding Is Possible); Or B. By Fax To: (506) 444-4200 (fax To Dedicated Mailbox). Note: Proposals In Response To A Request For Proposals (rfp) Will Not Be Accepted By Fax; Or C. By Email To Nbbids@snb.ca Or Soumissionsnb@snb.ca (do Not Submit Bids To Any Other Email). Click Here Instructions For Bid Submission For Important Instructions On How To Submit Bids By Email. D. Please Refrain From Submitting Your Bid Through Multiple Electronic Channels To Avoid Duplicate Bids. 3. All Bids Must Be Properly Signed By An Authorized Person. A. For Bids Submitted By Email Or Fax: Typed Signatures (in Any Font) That Are Not On The Bid Itself (i.e. In The Body Of The Email Or On The Fax Cover Sheet) Will Not Be Accepted. 4. All Bids Must Be Legible, Properly Completed And Contain The Proper Solicitation Number. 5. The Proponent Is Solely Responsible For Ensuring That The Bid Submission In Its Entirety, Including All Attachments, Is Received Before Closing Date And Time As Indicated On The Solicitation Documents. A. The Proponent Bears All Risk Associated With Delivering Its Bid By Electronic Submission, Including But Not Limited To Delays In Transmission Between The Proponent's Computer And The Province's Electronic Mail System, Nbon Or Fax. B. The Date And Time Of Official Receipt Of The Bid Will Be The Time Of Receipt Recorded In The Nbon System (for E-bids) Or The Time Of Receipt In The Province's Electronic Mail System (for Fax And Email Bid Submissions). 6. All Bids Must Be Stated In Canadian Funds. Sales Taxes Should Not Be Included In The Unit, Extended Or Total Prices. 7. All Tenders Must Be F.o.b. Destination, Freight Prepaid. 8. This Invitation Is Being Conducted Under The Provisions Of The Procurement Act And Regulation 2014-93 As Of The Date Of The Issuance Of The Invitation. Direct Deposit The Province Of New Brunswick Is Now Using Direct Deposit As The Standard Method Of Issuing Payments. Suppliers Are Required To Provide Bank Account Information And An Email Address For The Notice Of Remittance. Please Send The Completed Direct Deposit Form To Service New Brunswick (e-mail Address And Mailing Address Are Indicated On The Form). Please Click On The Link Below To View The Direct Deposit Form. Https://www2.snb.ca/content/dam/snb/procurement/directdepositvirementdirect.pdf A Bidder Must Obtain Official Solicitation Documents From A Distribution Service, Authorized By The Minister Of Service New Brunswick, In Order To Submit A Bid. The Current Authorized Distribution Services Are The New Brunswick Opportunities Network (nbon) (operated By Service New Brunswick, Province Of Nb), Bidsalert (operated By Tendering Publications Ltd.) And Merx (operated By Mediagrif Interactive Technologies). Bids Should Be Submitted On The Official Bid Documents Obtained From These Authorized Distribution Services. The Province Of New Brunswick Reserves The Right To Negotiate Pricing, Value Added And Other Savings Opportunities With The Successful Proponent At Time Of Award And Throughout The Contract. All Suppliers Engaged To Deliver Services On Behalf Of The Government Of New Brunswick Must Ensure Compliance With The Official Languages Act In The Delivery Of Those Services. For More Information, Please Refer To The Official Languages Act. The Atlantic Provinces Standard Terms & Conditions For Goods And Services Apply To This Procurement And Are Considered To Be Incorporated Into This Document. By Submitting A Bid, You Agree And Accept These Terms And Conditions. Current "atlantic Provinces Standard Terms And Conditions" Are Available On The New Brunswick Opportunities Network, The Council Of Atlantic Premiers' Website Or From An Authorized Service Provider. Covid-19 Restrictions For Workers Entering New Brunswick All Suppliers And Workers Entering The Province Of New Brunswick For Work Purposes Must Comply With The Requirements Established By Worksafe Nb And Public Health, Including Isolation Requirements Where Applicable. Click Here For More Information On These Requirements. Questions: Written Questions Relating To This Opportunity May Be Submitted To The Address Provided Below Via Email By Clicking On Questions. Please Be Sure To Include The Solicitation/tender Number In The Subject Line. Email Address: Bidquestionssoumissions@snb.ca Note: This Email Account Is Strictly For The Receipt Of Questions On Open Opportunities. This Email Is Not For The Submission Of Bids. Covid-19 Supplier Vaccination Policy Suppliers Must Comply With All Gnb Health And Safety Policies And Standards Including, Without Limitation, All Health And Safety Policies And Standards Related To Covid-19, As Applicable. Go To Www.gnb.ca/nbon To View The Full Policy And Faqs. Under Canadian Law (and International Agreements), Your Bid Must Arrive Separately And Independently, Without Conspiracy, Collusion Or Fraud; See Http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home For Further Information. Pay Equity Does Your Organization Have 50 Or More Employees? The Government Of New Brunswick Is Committed To Encouraging And Incentivizing The Adoption Of Pay Equity By Employers Doing Business With Government. Prior To The Award Of Procurements For Goods And Services Valued Over $1,000,000, Suppliers, With Fifty (50) Or More Employees Will Be Required To Complete The Pay Equity Learning Module Developed By The Women's Equality Branch. Suppliers Should Provide A Copy Of Their Certificate Of Completion With Their Bid Submission. To Complete The Online Module And Obtain Your Certificate, Please Visit Www.gnb.ca/payequity. For Questions, Please Contact The Pay Equity Bureau Toll Free: (877) 253-0266 Or By Email: Peb-bes@gnb.ca. All Discounts Quoted Will Be Considered To Be Without Limitations. Award Of Contracts: No Contract Shall Be Awarded And No Payment Shall Be Made To A Vendor Unless Authorized By The Minister Or His Delegates. The Minister May Make An Award To The Preferred Vendor Conditional On The Negotiation And Acceptance Of A Detailed Contract Between The Province And The Vendor. In Such Cases, Should The Detailed Contract Negotiations Not Be Completed In A Reasonable Period Of Time, The Province Reserves The Right To Discontinue Negotiations With The Vendor And Subsequently Enter Into Negotiations With The Second Preferred Vendor. No Right Or Duty, In Whole Or In Part, Of The Vendor Under A Contract Issued May Be Assigned Or Delegated Without The Prior Consent Of The Strategic Procurement Branch. Unless Indicated Otherwise In This Tender Notice Or Attached Documents, All Prices Must Be Extended And Totalled. All Suppliers Engaged To Deliver Goods Or Services To The Government Of New Brunswick Must Ensure Compliance With The Designated Materials Regulation In The Provision Or Delivery Of Those Goods Obligated Under That Regulation. Please Refer To Recycle Nb's Website And The Designated Materials Regulation For Specifics. Payment Of Invoices Payment Of Invoices Is The Responsibility Of The Department Or Organization To Whom The Goods Are Shipped Or Services Are Supplied. Where The Estimated Value Of The Goods Or Services To Be Procured Is Below The Lowest Applicable Threshold Value Of Any Relevant Trade Agreement, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Lowest-priced Acceptable Bid Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Highest Scoring Acceptable Bid Submission Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference. Holiday Season Office Closure The Strategic Procurement Division Of Service New Brunswick (located At 300 St. Mary's Street) Will Be Closed For The Holiday Season. This Includes All Strategic Procurement Operations (except Strategic Procurement - Health), The Reception Area And The Central Tendering Office. The Closure Period Is From 12 P.m. On December 24, 2024 To 8:15 A.m. On January 2, 2025. The New Brunswick Opportunities Network (nbon) Will Be Accessible Throughout This Period, However Please Note Support (helpline And Email Queries) Will Not Be Available During This Time.