Northwest Territories Power Cor Tender

The Northwest Territories Power Corporation (ntpc) Owns And Operates The Backup Diesel Generating Plants Located In Fort Smith, Fort Resolution & Buffalo Junction, Nt. All 3 (three) Of These Generating Plants Are Normally “stand-by-plants” And Typically Operate During Emergency Situations Or During Annual Maintenance For 2 Weeks In The Middle Of August For The Taltson Hydro-electric Generating System Maintenance. Fuel Is To Be Delivered On An “as And When” Required Basis. The Fuel Estimates For The 30 Kw Generator At The Pine Point Substation Have Been Covered Off In The Buffalo Junction Estimates. General Delivery, In Fort Smith, Will Be Expected To Be Made Monday Through Friday Between The Hours Of 08:00 And 16:00. Delivery, In Fort Resolution/buffalo Junction/pine Point, Will Be Expected To Be Made Monday Through Friday Between The Hours Of 09:00 And 16:00. Suppliers Shall Be Prepared To Begin Deliveries On April 1, 2024. Delivery Dates And Times Shall Be Confirmed With The Manager, Operations And Maintenance With No Less Than 24 (twenty-four) Hours’ Notice. The Manager, Operations And Maintenance Shall Confirm Dates And Times With The Operator In Fort Resolution. Drivers Shall Be Responsible For The Own Safe And Lawful Egress To And From The Power Generating Plants On Any Territorial Highway And Truckers Shall Adhere To Posted Speed Limit Conditions Posted On Ntpc Property. The Suppler Shall Provide Sealed And Approved Government Standards Meter Delivery Tickets Or Shall Accept Ntpc Tank Dips Before And After Delivery For Quality Control. The Supplier’s Drivers/ Fuel Handlers Shall Have Work Protection Training For Contractors Per Ntpc’s Health & Safety Management System; All Rules, Regulations And Procedures Must Be Adhered To. Supply And Deliver A Combined Volume Of Approximately 600,000 (six Hundred Thousand). Contract Shall Be April 1, 2024, To March 31, 2026, Suppliers Shall Be Prepared To Begin Deliveries On April 1, 2024. The Supplier’s Drivers/ Fuel Handlers Shall Wear All Approved Personal Protection Equipment (ppe) As Per Ntpc’s Health & Safety Management System. The Supplier’s Drivers/ Fuel Handlers Shall Ensure All Grounding Procedures Are Followed. .2 Completion Of Ntpc Safety Orientation .3 Participate In Daily Tailboard Meetings The Successful Bidder Is To Supply And Deliver A Combined Volume Of Approximately 600,000 (six Hundred Thousand) Liters Of Bulk Diesel Fuel To The Ntpc Power Generating Stations Located At Fort Smith, Fort Resolution, Buffalo Junction And Pine Point, Northwest Territories. The Fuel, Generally Referred To As P-50 Diesel Fuel Must Meet Specification Can/cgsb – 3.6 – M2000 Or The Most Recent Revision Of The Cgsb Specification, Type “a” Automotive Diesel Fuel With A Cloud Point Of -43oc And Having A Minimum Viscosity Of 1.4 Cst At 40oc. All Ntpc Safe Work Practices Must Be Followed While On Ntpc Sites. The Local Staff At Each Site Must Be Present For All Deliveries And Can Supply Training And Information. The Bidder Shall Be Solely Responsible For Safety At The Place Of Work, In Accordance With Best Industry Standards And In Full Compliance With The Rules, Regulations, And Practices Required By The Applicable Workplace Health And Safety Legislation. The Bidder Shall Also Be Solely Responsible For Initiating, Maintaining, And Supervising All Safety Precautions And Programs In Connection With The Performance Of The Work. Deliverables.